MIB Browser

CISCO-PAGP-MIB

ciscoSystems
The MIB module for configuration of Fast Etherchannel
and the operation of the Port Aggregation Protocol (PAgP).
These features allow two or more physical interfaces to
be aggregated together to form a single agport.  This
agport behaves like a single interface with improved
bandwidth and/or availability over each of its component
physical interfaces.

You can monitor interfaces, agports, and related statistics
through the ifStackTable and ifTable entries.
Organization
Cisco Systems, Inc.
Root OID
1.3.6.1.4.1.9.9.98
Last updated
Objects
53
Source
Show full MIB
snmptranslate -m CISCO-PAGP-MIB -Tp
snmpwalk -v2c -c <community> -m CISCO-PAGP-MIB <host> 1.3.6.1.4.1.9.9.98

Imports

CISCO-SMIciscoMgmt
CISCO-TCInterfaceIndexOrZero
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIBits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION, TimeStamp

OID tree

NameOIDTypeAccessStatusExample
IciscoPagpMIB1.3.6.1.4.1.9.9.98
NciscoPagpMIBObjects1.3.6.1.4.1.9.9.98.1
NpagpGroupCapabilityConfiguration1.3.6.1.4.1.9.9.98.1.1
TpagpEtherChannelTable1.3.6.1.4.1.9.9.98.1.1.1NA
RpagpEtherChannelEntry1.3.6.1.4.1.9.9.98.1.1.1.1NA
CpagpEthcOperationMode1.3.6.1.4.1.9.9.98.1.1.1.1.1PagpEthcOperationModeRW1
CpagpDeviceId1.3.6.1.4.1.9.9.98.1.1.1.1.2MacAddressRO8c:1e:80:6f:23:60
CpagpPhysGroupCapability1.3.6.1.4.1.9.9.98.1.1.1.1.3PagpGroupCapabilityRO0
CpagpOperGroupCapability1.3.6.1.4.1.9.9.98.1.1.1.1.4PagpGroupCapabilityRO0
CpagpAdminGroupCapability1.3.6.1.4.1.9.9.98.1.1.1.1.5PagpGroupCapabilityRW0
CpagpPortPriority1.3.6.1.4.1.9.9.98.1.1.1.1.6PagpPortPriorityRW128
CpagpLearnMethod1.3.6.1.4.1.9.9.98.1.1.1.1.7PagpLearnMethodRW2
CpagpGroupIfIndex1.3.6.1.4.1.9.9.98.1.1.1.1.8InterfaceIndexOrZeroRO0
CpagpDistributionProtocol1.3.6.1.4.1.9.9.98.1.1.1.1.9INTEGERRWip(1)
CpagpDistributionAddress1.3.6.1.4.1.9.9.98.1.1.1.1.10INTEGERRWboth(3)
CpagpRate1.3.6.1.4.1.9.9.98.1.1.1.1.11INTEGERRWnormal(2)
CpagpInPacketTimeout1.3.6.1.4.1.9.9.98.1.1.1.1.12Unsigned32 (1..4294967295)RW90
NpagpProtocol1.3.6.1.4.1.9.9.98.1.2
TpagpProtocolConfigTable1.3.6.1.4.1.9.9.98.1.2.1NA
RpagpProtocolConfigEntry1.3.6.1.4.1.9.9.98.1.2.1.1NA
CpagpOperationMode1.3.6.1.4.1.9.9.98.1.2.1.1.1PagpOperationModeRW
CpagpPortState1.3.6.1.4.1.9.9.98.1.2.1.1.2INTEGERRO
CpagpLastStateChange1.3.6.1.4.1.9.9.98.1.2.1.1.3TimeStampRO
CpagpHelloFrequency1.3.6.1.4.1.9.9.98.1.2.1.1.4INTEGERRO
CpagpDistributionAlgorithm1.3.6.1.4.1.9.9.98.1.2.1.1.5DisplayStringRO
CpagpPartnerCount1.3.6.1.4.1.9.9.98.1.2.1.1.6INTEGERRO
CpagpPartnerDeviceId1.3.6.1.4.1.9.9.98.1.2.1.1.7MacAddressRO
CpagpPartnerLearnMethod1.3.6.1.4.1.9.9.98.1.2.1.1.8PagpLearnMethodRO
CpagpPartnerPortPriority1.3.6.1.4.1.9.9.98.1.2.1.1.9PagpPortPriorityRO
CpagpPartnerIfIndex1.3.6.1.4.1.9.9.98.1.2.1.1.10InterfaceIndexOrZeroRO
CpagpPartnerGroupCapability1.3.6.1.4.1.9.9.98.1.2.1.1.11PagpGroupCapabilityRO
CpagpPartnerGroupIfIndex1.3.6.1.4.1.9.9.98.1.2.1.1.12InterfaceIndexOrZeroRO
CpagpPartnerDeviceName1.3.6.1.4.1.9.9.98.1.2.1.1.13DisplayStringRO
CpagpPartnerPortName1.3.6.1.4.1.9.9.98.1.2.1.1.14DisplayStringRO
CpagpPartnerAgportMACAddress1.3.6.1.4.1.9.9.98.1.2.1.1.15MacAddressRO
TpagpProtocolStatsTable1.3.6.1.4.1.9.9.98.1.2.2NA
RpagpProtocolStatsEntry1.3.6.1.4.1.9.9.98.1.2.2.1NA
CpagpInPackets1.3.6.1.4.1.9.9.98.1.2.2.1.3Counter32RO
CpagpOutPackets1.3.6.1.4.1.9.9.98.1.2.2.1.4Counter32RO
CpagpInFlushes1.3.6.1.4.1.9.9.98.1.2.2.1.5Counter32RO
CpagpReturnedFlushes1.3.6.1.4.1.9.9.98.1.2.2.1.6Counter32RO
CpagpOutFlushes1.3.6.1.4.1.9.9.98.1.2.2.1.7Counter32RO
CpagpInErrors1.3.6.1.4.1.9.9.98.1.2.2.1.8Counter32RO
NciscoPagpMIBConformance1.3.6.1.4.1.9.9.98.3
NciscoPagpMIBCompliances1.3.6.1.4.1.9.9.98.3.1
MciscoPagpMIBComplianceV1R11.3.6.1.4.1.9.9.98.3.1.1obsolete
MciscoPagpMIBComplianceV2R21.3.6.1.4.1.9.9.98.3.1.2deprecated
MciscoPagpMIBComplianceV3R31.3.6.1.4.1.9.9.98.3.1.3
NciscoPagpMIBGroups1.3.6.1.4.1.9.9.98.3.2
GciscoPagpEthcGroupV1R11.3.6.1.4.1.9.9.98.3.2.1obsolete
GciscoPagpPagpGroupV1R11.3.6.1.4.1.9.9.98.3.2.2
GciscoPagpEthcGroupV2R21.3.6.1.4.1.9.9.98.3.2.3
GciscoPagpRateAndTimeOutGroup1.3.6.1.4.1.9.9.98.3.2.4

Textual conventions

PagpEthcOperationMode INTEGER

manual(2) off(1) pagpOn(3)

The group-capability configuration operation mode of Fast
Etherchannel on this interface:

    off(1)       No aggregation of interfaces is allowed.

    manual(2)    Aggregation is under control of the
                 pagpGroupCapabilityConfiguration
                 section; no PAgP protocol packets are sent,
                 and any received are ignored.

    pagpOn(3)    Aggregation is under control of the PAgP
                 protocol.  PAgP packets are sent on the
                 interface and those received are acted upon.

It is anticipated that further values of this textual convention
may be defined as additional aggregation protocols are defined.
PagpGroupCapability Integer32
The group-capability value of an interface.  Indicates the
ability of the interface to aggregate together with other
interfaces to form aggregate links, or agports.

The value of PagpGroupCapability has no meaning except by
comparison (equal or not equal) to other PagpGroupCapability
values for different interfaces (ifIndex values) having the
same device (pagpDeviceId).  If two different interfaces on the
same device have the same PagpGroupCapability, then they are
capable of being aggregated into the same agport.  If they
have different PagpGroupCapability values, then they cannot
be aggregated together.

The assignment of PagpGroupCapability values to the variables
which use them can be made either by the network administrator
or by the managed system, depending on the variable.  One
easily-used and understood means of assigning
PagpGroupCapability values is to use, for each interface's
PagpGroupCapability, the lowest ifIndex (in numerical value)
of all of the intefaces with which this interface can
aggregate.  The use of this technique is not required.
Therefore, when examining a variable using the
PagpGroupCapability, the user must not assume that the values
have any meaning, other than by comparison for equality with
other interfaces' values on the same device.

Note also that a single managed system may utilize multiple
pagpDeviceId values.  PagpGroupCapability values may be
compared only among those interfaces with the same
pagpDeviceId values.
PagpLearnMethod INTEGER

agPort(2) physPort(1) undefined(3)

Indicates the ability of this device to determine the input
        interface of an incoming data packet received on an aggregated
        interface.  This serves as a request to the sending device for
the
        use or avoidance of different means of assigning packets to
        the member interfaces of an aggregation.  Three values are
defined:

            physPort(1)  This device claims to be unable to ignore the
                         physical interface on which the packet is
                         received.

            agPort(2)    This device claims to be able to ignore the
                         physical interface on which the packet is
                         received.

            undefined(3) The learn method is unknown.  This value is
                         not allowed in some variables.
PagpOperationMode INTEGER

automatic(3) automaticSilent(4) desirable(1) desirableSilent(2)

The group-capability configuration operation mode of the PAgP
protocol on this interface:

    desirable(1) aggregation is under control of the PAgP
                 protocol.  PAgP packets are sent on the
                 interface and those received are acted upon.
                 If no data packets are received on the
                 interface, then the interface is never attached
                 to an agport and cannot be used for data.

    desirableSilent(2)
                 aggregation is under control of the PAgP
                 protocol.  PAgP packets are sent on the
                 interface and those received are acted upon.
                 If no data packets are received on the
                 interface, then after some timeout period, the
                 interface is attached, by itself, to an agport
                 and can thus be used for data transmission.

    automatic(3) aggregation is under control of the PAgP
                 protocol.  PAgP packets are not sent on the
                 interface until at least one PAgP packet is
                 received which indicates that the sender is
                 operating in desirable or desirableSilent mode.
                 If no data packets are received on the
                 interface, then the interface is never attached
                 to an agport and cannot be used for data.

    automaticSilent(4)
                 aggregation is under control of the PAgP
                 protocol.  PAgP packets are not sent on the
                 interface until at least one PAgP packet is
                 received which indicates that the sender is
                 operating in desirable or desirableSilent mode.
                 If no data packets are received on the
                 interface, then after some timeout period, the
                 interface is attached, by itself, to an agport
                 and can thus be used for data transmission.

    The value of PagpOperationMode takes effect only when the
    value of pagpEthcOperationMode is pagpOn(3).  If
    pagpEthcOperationMode has any other value, the operation of
    the PAgP protocol is disabled.
PagpPortPriority INTEGER (0..255)
The priority of this interface for use as the active port of
an aggregation operating in hot-standby mode.  The highest
numerical value indicates the most-desirable interface.