MIB Browser

CISCO-OPTICAL-MONITOR-MIB

ciscoSystems
This MIB module defines objects to monitor optical
characteristics and set corresponding thresholds on the
optical interfaces in a network element.
Organization
Cisco Systems, Inc.
Root OID
1.3.6.1.4.1.9.9.264
Last updated
Objects
70
Source
Show full MIB
snmptranslate -m CISCO-OPTICAL-MONITOR-MIB -Tp
snmpwalk -v2c -c <community> -m CISCO-OPTICAL-MONITOR-MIB <host> 1.3.6.1.4.1.9.9.264

Imports

CISCO-SMIciscoMgmt
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIBits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION, TimeStamp

OID tree

NameOIDTypeAccessStatus
IciscoOpticalMonitorMIB1.3.6.1.4.1.9.9.264
NcOpticalMonitorMIBObjects1.3.6.1.4.1.9.9.264.1
NcOpticalMonGroup1.3.6.1.4.1.9.9.264.1.1
TcOpticalMonTable1.3.6.1.4.1.9.9.264.1.1.1NA
RcOpticalMonEntry1.3.6.1.4.1.9.9.264.1.1.1.1NA
CcOpticalMonDirection1.3.6.1.4.1.9.9.264.1.1.1.1.1OpticalIfDirectionNA
CcOpticalMonLocation1.3.6.1.4.1.9.9.264.1.1.1.1.2OpticalIfMonLocationNA
CcOpticalMonParameterType1.3.6.1.4.1.9.9.264.1.1.1.1.3OpticalParameterTypeNA
CcOpticalParameterValue1.3.6.1.4.1.9.9.264.1.1.1.1.4OpticalParameterValueRO
CcOpticalParamHighAlarmThresh1.3.6.1.4.1.9.9.264.1.1.1.1.5OpticalParameterValueRW
CcOpticalParamHighAlarmSev1.3.6.1.4.1.9.9.264.1.1.1.1.6OpticalAlarmSeverityRW
CcOpticalParamHighWarningThresh1.3.6.1.4.1.9.9.264.1.1.1.1.7OpticalParameterValueRW
CcOpticalParamHighWarningSev1.3.6.1.4.1.9.9.264.1.1.1.1.8OpticalAlarmSeverityRW
CcOpticalParamLowAlarmThresh1.3.6.1.4.1.9.9.264.1.1.1.1.9OpticalParameterValueRW
CcOpticalParamLowAlarmSev1.3.6.1.4.1.9.9.264.1.1.1.1.10OpticalAlarmSeverityRW
CcOpticalParamLowWarningThresh1.3.6.1.4.1.9.9.264.1.1.1.1.11OpticalParameterValueRW
CcOpticalParamLowWarningSev1.3.6.1.4.1.9.9.264.1.1.1.1.12OpticalAlarmSeverityRW
CcOpticalParamAlarmStatus1.3.6.1.4.1.9.9.264.1.1.1.1.13OpticalAlarmStatusRO
CcOpticalParamAlarmCurMaxThresh1.3.6.1.4.1.9.9.264.1.1.1.1.14OpticalParameterValueRO
CcOpticalParamAlarmCurMaxSev1.3.6.1.4.1.9.9.264.1.1.1.1.15OpticalAlarmSeverityRO
CcOpticalParamAlarmLastChange1.3.6.1.4.1.9.9.264.1.1.1.1.16TimeStampRO
CcOpticalMon15MinValidIntervals1.3.6.1.4.1.9.9.264.1.1.1.1.17Unsigned32 (0..96)RO
CcOpticalMon24HrValidIntervals1.3.6.1.4.1.9.9.264.1.1.1.1.18Unsigned32 (0..1)RO
CcOpticalParamThreshSource1.3.6.1.4.1.9.9.264.1.1.1.1.19BitsRW
ScOpticalNotifyEnable1.3.6.1.4.1.9.9.264.1.1.2OpticalAlarmSeverityOrZeroRW
ScOpticalMonEnable1.3.6.1.4.1.9.9.264.1.1.3BitsRW
ScOpticalMonPollInterval1.3.6.1.4.1.9.9.264.1.1.4Unsigned32RW
TcOpticalMonIfTable1.3.6.1.4.1.9.9.264.1.1.5NA
RcOpticalMonIfEntry1.3.6.1.4.1.9.9.264.1.1.5.1NA
CcOpticalMonIfTimeInSlot1.3.6.1.4.1.9.9.264.1.1.5.1.1Unsigned32RO
NcOpticalPMGroup1.3.6.1.4.1.9.9.264.1.2
TcOpticalPMCurrentTable1.3.6.1.4.1.9.9.264.1.2.1NA
RcOpticalPMCurrentEntry1.3.6.1.4.1.9.9.264.1.2.1.1NA
CcOpticalPMCurrentPeriod1.3.6.1.4.1.9.9.264.1.2.1.1.1OpticalPMPeriodNA
CcOpticalPMCurrentDirection1.3.6.1.4.1.9.9.264.1.2.1.1.2OpticalIfDirectionNA
CcOpticalPMCurrentLocation1.3.6.1.4.1.9.9.264.1.2.1.1.3OpticalIfMonLocationNA
CcOpticalPMCurrentParamType1.3.6.1.4.1.9.9.264.1.2.1.1.4OpticalParameterTypeNA
CcOpticalPMCurrentMaxParam1.3.6.1.4.1.9.9.264.1.2.1.1.5OpticalParameterValueRO
CcOpticalPMCurrentMinParam1.3.6.1.4.1.9.9.264.1.2.1.1.6OpticalParameterValueRO
CcOpticalPMCurrentMeanParam1.3.6.1.4.1.9.9.264.1.2.1.1.7OpticalParameterValueRO
CcOpticalPMCurrentUnavailSecs1.3.6.1.4.1.9.9.264.1.2.1.1.8Integer32 (0..86400)RO
TcOpticalPMIntervalTable1.3.6.1.4.1.9.9.264.1.2.2NA
RcOpticalPMIntervalEntry1.3.6.1.4.1.9.9.264.1.2.2.1NA
CcOpticalPMIntervalPeriod1.3.6.1.4.1.9.9.264.1.2.2.1.1OpticalPMPeriodNA
CcOpticalPMIntervalNumber1.3.6.1.4.1.9.9.264.1.2.2.1.2Integer32 (1..96)NA
CcOpticalPMIntervalDirection1.3.6.1.4.1.9.9.264.1.2.2.1.3OpticalIfDirectionNA
CcOpticalPMIntervalLocation1.3.6.1.4.1.9.9.264.1.2.2.1.4OpticalIfMonLocationNA
CcOpticalPMIntervalParamType1.3.6.1.4.1.9.9.264.1.2.2.1.5OpticalParameterTypeNA
CcOpticalPMIntervalMaxParam1.3.6.1.4.1.9.9.264.1.2.2.1.6OpticalParameterValueRO
CcOpticalPMIntervalMinParam1.3.6.1.4.1.9.9.264.1.2.2.1.7OpticalParameterValueRO
CcOpticalPMIntervalMeanParam1.3.6.1.4.1.9.9.264.1.2.2.1.8OpticalParameterValueRO
CcOpticalPMIntervalUnavailSecs1.3.6.1.4.1.9.9.264.1.2.2.1.9Integer32 (0..86400)RO
NcOpticalMonitorMIBNotifications1.3.6.1.4.1.9.9.264.2
NcOpticalMonNotificationPrefix1.3.6.1.4.1.9.9.264.2.0
!cOpticalMonParameterStatus1.3.6.1.4.1.9.9.264.2.0.1
NcOpticalMonitorMIBConformance1.3.6.1.4.1.9.9.264.3
NcOpticalMonitorMIBCompliances1.3.6.1.4.1.9.9.264.3.1
McOpticalMonitorMIBCompliance1.3.6.1.4.1.9.9.264.3.1.1deprecated
McOpticalMonitorMIBComplianceRev1.3.6.1.4.1.9.9.264.3.1.2
NcOpticalMonitorMIBGroups1.3.6.1.4.1.9.9.264.3.2
GcOpticalMIBMonGroup1.3.6.1.4.1.9.9.264.3.2.1
GcOpticalMIBThresholdGroup1.3.6.1.4.1.9.9.264.3.2.2
GcOpticalMIBSeverityGroup1.3.6.1.4.1.9.9.264.3.2.3
GcOpticalMIBPMGroup1.3.6.1.4.1.9.9.264.3.2.4
GcOpticalMIBNotifyEnableGroup1.3.6.1.4.1.9.9.264.3.2.5
GcOpticalMIBNotifGroup1.3.6.1.4.1.9.9.264.3.2.6
GcOpticalMonIfTimeGroup1.3.6.1.4.1.9.9.264.3.2.7
GcOpticalMIBEnableConfigGroup1.3.6.1.4.1.9.9.264.3.2.8
GcOpticalMIBIntervalConfigGroup1.3.6.1.4.1.9.9.264.3.2.9
GcOpticalMonThreshSourceGroup1.3.6.1.4.1.9.9.264.3.2.10

Textual conventions

OpticalAlarmSeverity INTEGER

cleared(6) critical(1) major(2) minor(3) notAlarmed(4) notReported(5)

The severity of a trouble condition. A smaller enumerated
integer value indicates that the condition is more severe.

The severities are defined as follows:

'critical'    An alarm used to indicate a severe,
              service-affecting condition has occurred and that
              immediate corrective action is imperative,
              regardless of the time of day or day of the week.

'major'       An alarm used for hardware or software conditions
              that indicate a serious disruption of service or
              malfunctioning or failure of important hardware.
              These troubles require the immediate attention and
              response of a technician to restore or maintain
              system capability. The urgency is less than in
              critical situations because of a lesser immediate
              or impending effect on service or system
              performance.

'minor'       An alarm used for troubles that do not have a
              serious effect on service to customers or for
              troubles in hardware that are not essential to
              the operation of the system.

'notAlarmed'  An event used for troubles that do not require
              action, for troubles that are reported as a
              result of manually initiated diagnostics, or for
              transient events such as crossing warning
              thresholds.  This event can also be used to
              raise attention to a condition that could
              possibly be an impending problem.

'notReported' An event used for troubles similar to those
              described under 'notAlarmed', and that
              do not cause notifications to be generated. The
              information for these events is retrievable from
              the network element.

'cleared'     This value indicates that a previously
              occuring alarm condition has been cleared, or
              that no trouble condition is present.
OpticalAlarmSeverityOrZero INTEGER (0..6)
A value of either '0' or a valid optical alarm severity.
OpticalAlarmStatus OCTET STRING (SIZE (1))
A bitmap that indicates the current status of thresholds
on an interface. The bit is set to 1 if the threshold is
currently being exceeded on the interface and will be set to 0
otherwise.

(MSB)                (LSB)
  7  6  5  4  3  2  1  0
 +----------------------+
 |                      |
 +----------------------+
              |  |  |  |
              |  |  |  +-- High alarm threshold
              |  |  +----- High warning threshold
              |  +-------- Low alarm threshold
              +----------- Low warning threshold

To minimize the probability of prematurely reacting to
momentary signal variations, a soak time may be incorporated
into the status indications in the following manner.
The indication is set when the threshold violation persists
for a period of time that exceeds the set soak interval.
The indication is cleared  when no threshold violation occurs
for a period of time which exceeds the clear soak interval.
In GR-2918-CORE, the recommended set soak interval is 2.5
seconds (plus/minus 0.5 seconds), and the recommended clear
soak interval is 10 seconds (plus/minus 0.5 seconds).
OpticalIfDirection INTEGER

notApplicable(3) receive(1) transmit(2)

This value indicates the direction being monitored at
the optical interface.
OpticalIfMonLocation INTEGER

afterAdjustment(2) beforeAdjustment(1) notApplicable(3)

This value applies when there are multiple points
at which optical characteristics can be measured, in the
given direction, at an interface. It indicates whether the
optical characteristics are measured before or after
adjustment (e.g. optical amplification or attenuation).

The codepoint 'notApplicable' should be used if no
amplifier/attenuator exists at an interface.
OpticalPMPeriod INTEGER

fifteenMin(1) twentyFourHour(2)

This value indicates the time period over which performance
monitoring data has been collected.
OpticalParameterType INTEGER

acPower(2) ambientTemp(3) biasCurrent(5) laserTemp(4) peltierCurrent(6) power(1) xcvrVoltage(7)

This value indicates the optical parameter that is
being monitored. Valid values are -

power (1)          : Optical Power (AC + DC) in 1/10ths of dBm
acPower (2)        : Optical AC Power in 1/10ths of dBm
ambientTemp (3)    : Ambient Temperature in 1/10ths of degrees
                     centigrade
laserTemp (4)      : Laser Temperature in 1/10ths of degrees
                     centigrade
biasCurrent (5)    : Laser bias current in 100s of microamperes
peltierCurrent (6) : Laser peltier current in milliamperes
xcvrVoltage (7)    : Transceiver voltage in millivolts
OpticalParameterValue Integer32 (-1000000..1000000)
The value of the optical parameter that is being monitored.

The range of values varies depending on the type of optical
parameter being monitored, as identified by a corresponding
object with syntax OpticalParameterType.

When the optical parameter being monitored is 'power' or
'acPower', the supported range is from -400 to 250, in
1/10ths of dBm.
Example: A value of -300 represents a power level of -30.0 dBm.

When the optical parameter being monitored is 'laserTemp' or
'ambientTemp', the supported range is from -500 to 850, in
1/10ths of degrees centigrade.
Example: A value of 235 represents a temperature reading of
23.5 degrees C.

When the optical parameter being monitored is 'biasCurrent',
the supported range is from 0 to 10000, in 100s of
microamperes.
Example: A value of 500 represents a bias current reading of
50,000 microamperes.

When the optical parameter being monitored is 'peltierCurrent',
the supported range is from -10000 to 10000, in milliamperes.

When the optical parameter being monitored is 'xcvrVoltage',
the supported range is from 0 to 10000, in millivolts.

The distinguished value of '-1000000' indicates that the object
has not yet been initialized or does not apply.

Used by