CISCO-LWAPP-WLAN-MIB
ciscoSystemsThis MIB is intended to be implemented on all those
devices operating as Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
tunnel from Cisco Light-weight LWAPP Access Points.
This MIB helps to manage the WLANs on the controller.
The relationship between CC and the LWAPP APs
can be depicted as follows:
+......+ +......+ +......+ +......+
+ + + + + + + +
+ CC + + CC + + CC + + CC +
+ + + + + + + +
+......+ +......+ +......+ +......+
.. . . .
.. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ AP + + AP + + AP + + AP + + AP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ MN + + MN + + MN + + MN + + MN +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
The LWAPP tunnel exists between the controller and
the APs. The MNs communicate with the APs through
the protocol defined by the 802.11 standard.
LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the configuration,
that includes the WLAN parameters, to the LWAPP APs.
The APs then encapsulate all the 802.11 frames from
wireless clients inside LWAPP frames and forward
the LWAPP frames to the controller.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends it to the controller to which
it is logically connected to.
Central Controller ( CC )
The central entity that terminates the LWAPP protocol
tunnel from the LWAPP APs. Throughout this MIB,
this entity also referred to as 'controller'.
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the
communication between the Access Points and the
controllers.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless
network associated with an access point.
Access Control List ( ACL )
A list of rules used to restrict the traffic reaching
an interface or the CPU or WLAN. Each ACL is an ordered
set of rules and actions. If a rule matches then the
action for that rule is applied to the packet.
802.1x
The IEEE ratified standard for enforcing port based
access control. This was originally intended for
use on wired LANs and later extended for use in
802.11 WLAN environments. This defines an
architecture with three main parts - a supplicant
(Ex. an 802.11 wireless client), an authenticator
(the AP) and an authentication server(a Radius
server). The authenticator passes messages back
and forth between the supplicant and the
authentication server to enable the supplicant
get authenticated to the network.
Temporal Key Integrity Protocol ( TKIP )
A security protocol defined to enhance the limitations
of WEP. Message Integrity Check and per-packet keying
on all WEP-encrypted frames are two significant
enhancements provided by TKIP to WEP.
Cisco Key Integrity Protocol ( CKIP )
A proprietary implementation similar to TKIP. CKIP
implements key permutation for protecting the CKIP
key against attacks. Other features of CKIP include
expansion of encryption key to 16 bytes of length for
key protection and MIC to ensure data integrity.
Wired Equivalent Privacy ( WEP )
A security method defined by 802.11. WEP uses a
symmetric key stream cipher called RC4 to encrypt the
data packets.
Wi-Fi Protected Access ( WPA )
Wi-Fi Protected Access (WPA and WPA2) are security
systems created in response to several serious
weaknesses found in Wired Equivalent Privacy (WEP).
WPA implements the majority of the IEEE 802.11i
standard, and was intended as an intermediate
measure to take the place of WEP while 802.11i was
prepared. WPA is designed to work with all wireless
network interface cards, but not necessarily with
first generation wireless access points.
WLAN Layer 2 Security
WLAN layer 2 (MAC) security defines the encryption and
authentication approaches such as 802.1x, WPA,
WPA2, CKIP and WEP.
Delivery Traffic Indication Map ( DTIM )
DTIM is measured in beacon intervals and is the time
period during which multicast/broadcast packets are
sent to clients. This helps client to go in Power Saving
mode and helps to save battery power.
Network Admission Control (NAC)
Cisco NAC uses the network infrastructure to enforce security
policy compliance on all devices that seek to access network
computing resources. With the Cisco NAC appliance, network
administrators can authenticate, authorize, evaluate, and
remediate wired, wireless, and remote users and their machines
prior to network access. The Cisco NAC appliance identifies
whether networked devices such as laptops, IP phones, or game
consoles are compliant with network security policies, and
repairs any vulnerabilities before it permits access to the
network.
Out of Band (OOB)
Out-of-band deployments require user traffic to traverse through
the NAC appliance only within authentication, posture
assessment, and remediation. When a user is authenticated and
passes all policy checks, the traffic is switched normally
through the network and bypasses the NAC server.
Band Select
The 2.4 GHz band is congested and clients have to contend with
numerous performance challenges. These consist of interference
from Bluetooth, microwave ovens, cordless phones, etc.;
protection mechanisms from 802.11b legacy clients; and
co-channel interference from other access points due to
802.11bg?s limit of three non-overlapping channels. Allowing
client Wi-Fi radios capable of dual band (2.4 and 5 GHz)
operation move to the less congested 5 GHz radios would improve
the overall performance of the network.
The Band Select algorithm is based on probe response suppression
on clients 2.4G radio. The feature is OFF by default and has to
be manually switched ON globally for a WLC. It can be optionally
over-ridden per-SSID to disallow it.
Network Access Identifier ( NAI )
In order to provide roaming services, it is necessary
to have a standardized method for identifying users.
NAI is actually the user identity submitted by the client
during network authentication.
KTS (Key Telephone System)
Key Telephone System is an alternative to a
private branch exchange (PBX)phone system.
A KTS is equipped with several buttons that allow
a caller to directly select outgoing lines or
incoming calls, and use intercom and
conference facilities.
HALO (Hyperlocation)
Hyperlocation is a technique of calculating location using
Angle of Arrival(AoA) tracks 802.11 OFDM clients
(meaning 802.11a/g/n/ac clients) that are associated(connected)
on the network and is able to do so with much higher accuracy
than conventional Real Time Location Systems(RTLS) that rely
on only RSSI (RF Signal Strength).
PakRSSI (Packet Received Signal Strength Indicator)
PakRSSI is a measurement of the power present in a received radio signal.
POE (Power Over Ethernet)
Power over Ethernet or PoE describes any of several standardized
or ad-hoc systems which pass electrical power along with data on
Ethernet cabling. This allows a single cable to provide both data
connection and electrical power to devices such as wireless
access points or IP cameras.
Multicast Domain Name System (mDNS)
This is the underlying protocol that is used for Service
advertisement and discovery in technologies like Bonjour,
Zero Touch Configuration
REFERENCE
[1] Wireless LAN Medium Access Control ( MAC ) and
Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol
[3] IEEE 802.11 - The original 1 Mbit/s and 2 Mbit/s,
2.4 GHz RF and IR standard.snmptranslate -m CISCO-LWAPP-WLAN-MIB -Tpsnmpwalk -v2c -c <community> -m CISCO-LWAPP-WLAN-MIB <host> 1.3.6.1.4.1.9.9.512Imports
| CISCO-SMI | ciscoMgmt |
|---|---|
| CISCO-TC | CiscoURLStringOrEmpty |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, private |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, StorageType, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IciscoLwappWlanMIB | 1.3.6.1.4.1.9.9.512 | ||||||||||||||||||||
identity This MIB is intended to be implemented on all those
devices operating as Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
tunnel from Cisco Light-weight LWAPP Access Points.
This MIB helps to manage the WLANs on the controller.
The relationship between CC and the LWAPP APs
can be depicted as follows:
+......+ +......+ +......+ +......+
+ + + + + + + +
+ CC + + CC + + CC + + CC +
+ + + + + + + +
+......+ +......+ +......+ +......+
.. . . .
.. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ AP + + AP + + AP + + AP + + AP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ MN + + MN + + MN + + MN + + MN +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
The LWAPP tunnel exists between the controller and
the APs. The MNs communicate with the APs through
the protocol defined by the 802.11 standard.
LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the configuration,
that includes the WLAN parameters, to the LWAPP APs.
The APs then encapsulate all the 802.11 frames from
wireless clients inside LWAPP frames and forward
the LWAPP frames to the controller.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends it to the controller to which
it is logically connected to.
Central Controller ( CC )
The central entity that terminates the LWAPP protocol
tunnel from the LWAPP APs. Throughout this MIB,
this entity also referred to as 'controller'.
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the
communication between the Access Points and the
controllers.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless
network associated with an access point.
Access Control List ( ACL )
A list of rules used to restrict the traffic reaching
an interface or the CPU or WLAN. Each ACL is an ordered
set of rules and actions. If a rule matches then the
action for that rule is applied to the packet.
802.1x
The IEEE ratified standard for enforcing port based
access control. This was originally intended for
use on wired LANs and later extended for use in
802.11 WLAN environments. This defines an
architecture with three main parts - a supplicant
(Ex. an 802.11 wireless client), an authenticator
(the AP) and an authentication server(a Radius
server). The authenticator passes messages back
and forth between the supplicant and the
authentication server to enable the supplicant
get authenticated to the network.
Temporal Key Integrity Protocol ( TKIP )
A security protocol defined to enhance the limitations
of WEP. Message Integrity Check and per-packet keying
on all WEP-encrypted frames are two significant
enhancements provided by TKIP to WEP.
Cisco Key Integrity Protocol ( CKIP )
A proprietary implementation similar to TKIP. CKIP
implements key permutation for protecting the CKIP
key against attacks. Other features of CKIP include
expansion of encryption key to 16 bytes of length for
key protection and MIC to ensure data integrity.
Wired Equivalent Privacy ( WEP )
A security method defined by 802.11. WEP uses a
symmetric key stream cipher called RC4 to encrypt the
data packets.
Wi-Fi Protected Access ( WPA )
Wi-Fi Protected Access (WPA and WPA2) are security
systems created in response to several serious
weaknesses found in Wired Equivalent Privacy (WEP).
WPA implements the majority of the IEEE 802.11i
standard, and was intended as an intermediate
measure to take the place of WEP while 802.11i was
prepared. WPA is designed to work with all wireless
network interface cards, but not necessarily with
first generation wireless access points.
WLAN Layer 2 Security
WLAN layer 2 (MAC) security defines the encryption and
authentication approaches such as 802.1x, WPA,
WPA2, CKIP and WEP.
Delivery Traffic Indication Map ( DTIM )
DTIM is measured in beacon intervals and is the time
period during which multicast/broadcast packets are
sent to clients. This helps client to go in Power Saving
mode and helps to save battery power.
Network Admission Control (NAC)
Cisco NAC uses the network infrastructure to enforce security
policy compliance on all devices that seek to access network
computing resources. With the Cisco NAC appliance, network
administrators can authenticate, authorize, evaluate, and
remediate wired, wireless, and remote users and their machines
prior to network access. The Cisco NAC appliance identifies
whether networked devices such as laptops, IP phones, or game
consoles are compliant with network security policies, and
repairs any vulnerabilities before it permits access to the
network.
Out of Band (OOB)
Out-of-band deployments require user traffic to traverse through
the NAC appliance only within authentication, posture
assessment, and remediation. When a user is authenticated and
passes all policy checks, the traffic is switched normally
through the network and bypasses the NAC server.
Band Select
The 2.4 GHz band is congested and clients have to contend with
numerous performance challenges. These consist of interference
from Bluetooth, microwave ovens, cordless phones, etc.;
protection mechanisms from 802.11b legacy clients; and
co-channel interference from other access points due to
802.11bg?s limit of three non-overlapping channels. Allowing
client Wi-Fi radios capable of dual band (2.4 and 5 GHz)
operation move to the less congested 5 GHz radios would improve
the overall performance of the network.
The Band Select algorithm is based on probe response suppression
on clients 2.4G radio. The feature is OFF by default and has to
be manually switched ON globally for a WLC. It can be optionally
over-ridden per-SSID to disallow it.
Network Access Identifier ( NAI )
In order to provide roaming services, it is necessary
to have a standardized method for identifying users.
NAI is actually the user identity submitted by the client
during network authentication.
KTS (Key Telephone System)
Key Telephone System is an alternative to a
private branch exchange (PBX)phone system.
A KTS is equipped with several buttons that allow
a caller to directly select outgoing lines or
incoming calls, and use intercom and
conference facilities.
HALO (Hyperlocation)
Hyperlocation is a technique of calculating location using
Angle of Arrival(AoA) tracks 802.11 OFDM clients
(meaning 802.11a/g/n/ac clients) that are associated(connected)
on the network and is able to do so with much higher accuracy
than conventional Real Time Location Systems(RTLS) that rely
on only RSSI (RF Signal Strength).
PakRSSI (Packet Received Signal Strength Indicator)
PakRSSI is a measurement of the power present in a received radio signal.
POE (Power Over Ethernet)
Power over Ethernet or PoE describes any of several standardized
or ad-hoc systems which pass electrical power along with data on
Ethernet cabling. This allows a single cable to provide both data
connection and electrical power to devices such as wireless
access points or IP cameras.
Multicast Domain Name System (mDNS)
This is the underlying protocol that is used for Service
advertisement and discovery in technologies like Bonjour,
Zero Touch Configuration
REFERENCE
[1] Wireless LAN Medium Access Control ( MAC ) and
Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol
[3] IEEE 802.11 - The original 1 Mbit/s and 2 Mbit/s,
2.4 GHz RF and IR standard. | |||||||||||||||||||||
| NciscoLwappWlanMIBNotifs | 1.3.6.1.4.1.9.9.512.0 | ||||||||||||||||||||
| NciscoLwappWlanMIBObjects | 1.3.6.1.4.1.9.9.512.1 | ||||||||||||||||||||
| NciscoLwappWlanConfig | 1.3.6.1.4.1.9.9.512.1.1 | ||||||||||||||||||||
| TcLWlanConfigTable | 1.3.6.1.4.1.9.9.512.1.1.1 | NA | |||||||||||||||||||
table · not-accessible · current This table represents the WLAN configuration sent by the controller to the LWAPP APs for their operation. LWAPP APs exchange configuration messages with the controller and get the required configuration for their 802.11 related operations. As part of these messages, the WLAN configuration is pushed by the controller to the LWAPP APs. This table doesn't have any dependencies on other existing tables. By defining cLWlanIndex, the unique identifier for a WLAN, this table provides a common index structure for use in several other new tables that populate information on security related attributes like authentication, encryption, 802.11 parameters, Quality-of-Service attributes etc., that would relate to a particular WLAN. Rows are added or deleted by explicit management actions initiated by the user from a network management station through the cLWlanRowStatus object. | |||||||||||||||||||||
| RcLWlanConfigEntry | 1.3.6.1.4.1.9.9.512.1.1.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry in this table represents the WLAN configuration sent by the controller to LWAPP APs for use during their operations. entries can be added/deleted by explicit management actions by NMS or by user console
| |||||||||||||||||||||
| CcLWlanIndex | 1.3.6.1.4.1.9.9.512.1.1.1.1.1 | Unsigned32 (1..517) | NA | ||||||||||||||||||
column · Unsigned32 (1..517) · not-accessible · current This object uniquely identifies one instance of a WLAN on the controller. The value 513-517 indicates wired clients. | |||||||||||||||||||||
| CcLWlanRowStatus | 1.3.6.1.4.1.9.9.512.1.1.1.1.2 | RowStatus | RC | 1 | |||||||||||||||||
column · RowStatus · read-create · current This is the status column for this row and used
to create, modify and delete specific instances of rows
in this table.
This table supports modification of writable objects when the
RowStatus is 'active'.
The following objects are mandatory for successful
creation of an entry:
cLWlanProfileName
cLWlanSsid.Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanProfileName | 1.3.6.1.4.1.9.9.512.1.1.1.1.3 | SnmpAdminString (SIZE (1..64)) | RC | NAI_WLAN | |||||||||||||||||
column · SnmpAdminString (SIZE (1..64)) · read-create · current This object represents the profile name assigned to this WLAN. The name assigned to a WLAN has to be unique across all the WLANs on the controller. An administrator can assign a meaningful name that could later be used to refer a particular WLAN on the controller. This object cannot be modified when cLWlanRowStatus is 'active'. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanSsid | 1.3.6.1.4.1.9.9.512.1.1.1.1.4 | OCTET STRING (SIZE (1..32)) | RC | <private> | |||||||||||||||||
column · OCTET STRING (SIZE (1..32)) · read-create · current This object represents the SSID assigned to this WLAN. The access points will broadcast this SSID on this WLAN. Different WLAN could use the same SSID as long as the layer 2 security is different. This object cannot be modified when cLWlanRowStatus is 'active'. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanDiagChan | 1.3.6.1.4.1.9.9.512.1.1.1.1.5 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current This object is used to configure this WLAN as a diagnostic WLAN. A value of 'true' indicates that the WLAN can be used for diagnostic purposes. A value of 'false' indicates that the WLAN can not be used for diagnostic purposes. | |||||||||||||||||||||
| CcLWlanStorageType | 1.3.6.1.4.1.9.9.512.1.1.1.1.6 | StorageType | RC | 3 | |||||||||||||||||
column · StorageType · read-create · current This object represnts the storage type for this conceptual row. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanIsWired | 1.3.6.1.4.1.9.9.512.1.1.1.1.7 | TruthValue | RC | 2 | |||||||||||||||||
column · TruthValue · read-create · current This object is used to configure this WLAN as a wired or wireless WLAN. A value of 'true' indicates that this is a wired WLAN. A value of 'false' indicates that this is a wireless WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanIngressInterface | 1.3.6.1.4.1.9.9.512.1.1.1.1.8 | OCTET STRING (SIZE (0..32)) | RC | ||||||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-create · current This object represents the ingress interface attached to the wireless lan. | |||||||||||||||||||||
| CcLWlanNACSupport | 1.3.6.1.4.1.9.9.512.1.1.1.1.9 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current This object is used to configure the NAC- Out Of Band(OOB) support for the WLAN. A value of 'true' indicates that the WLAN supports the NAC- Out Of Band(OOB) feature. A value of 'false' indicates that the WLAN does not support the NAC- Out Of Band(OOB) feature. | |||||||||||||||||||||
| CcLWlanWepKeyChange | 1.3.6.1.4.1.9.9.512.1.1.1.1.10 | TimeStamp | RO | ||||||||||||||||||
column · TimeStamp · read-only · current This object represents the time when the static WEP key was changed by the user. | |||||||||||||||||||||
| CcLWlanChdEnable | 1.3.6.1.4.1.9.9.512.1.1.1.1.11 | TruthValue | RC | 1 | |||||||||||||||||
column · TruthValue · read-create · current This object indicates whether Coverage Hole Detection (CHD) is enabled on the controller. A value of 'true' indicates CHD is on and a value of 'false' indicates CHD is turned off for this WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlan802dot11anDTIM | 1.3.6.1.4.1.9.9.512.1.1.1.1.12 | Unsigned32 (1..255) | RC | 1 | |||||||||||||||||
column · Unsigned32 (1..255) · read-create · current This object represents DTIM configuration per WLAN for each 802.11 network. The DTIM value is measured in Beacon Intervals.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlan802dot11bgnDTIM | 1.3.6.1.4.1.9.9.512.1.1.1.1.13 | Unsigned32 (1..255) | RC | 1 | |||||||||||||||||
column · Unsigned32 (1..255) · read-create · current This object represents DTIM configuration per WLAN for each 802.11 network. The DTIM value is measured in Beacon Intervals.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanLoadBalancingEnable | 1.3.6.1.4.1.9.9.512.1.1.1.1.14 | TruthValue | RC | 2 | |||||||||||||||||
column · TruthValue · read-create · current This object indicates whether Load Balancing is enabled on the controller for this WLAN . A value of 'true' indicates Load Balance is on and a value of 'false' indicates Load Balance is turned off for this WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanBandSelectEnable | 1.3.6.1.4.1.9.9.512.1.1.1.1.15 | TruthValue | RC | 2 | |||||||||||||||||
column · TruthValue · read-create · current This object indicates whether Band Select is enabled on the controller for this WLAN. A value of 'true' indicates Band Select is on and a value of 'false' indicates Band Select is turned off for this WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanPassiveClientEnable | 1.3.6.1.4.1.9.9.512.1.1.1.1.16 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current This object specifies whether passive client is enabled on the controller for this WLAN. A value of 'true' indicates passive client is on and a value of 'false' indicates passive client is turned off for this WLAN. | |||||||||||||||||||||
| CcLWlanReAnchorRoamedVoiceClientsEnable | 1.3.6.1.4.1.9.9.512.1.1.1.1.17 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current This object specifies whether the Roamed Voice Client Re-Anchoring feature is enabled on the controller for this WLAN. A value of 'true' indicates the roamed voice clients will get re-anchored. A value of 'false' indicates the roamed voice clients re-anchoring is turned off for this WLAN. | |||||||||||||||||||||
| CcLWlanMulticastInterfaceEnable | 1.3.6.1.4.1.9.9.512.1.1.1.1.18 | TruthValue | RC | 1 | |||||||||||||||||
column · TruthValue · read-create · current This object specifies whether multicast interface is enabled on the controller. A value of 'true' indicates that multicast interface feature is enabled and the interface represented by 'cLWlanMulticastInterface' would be used for the multicast traffic on this WLAN. A value of 'false' indicates that multicast interface feature is turned off for this WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanMulticastInterface | 1.3.6.1.4.1.9.9.512.1.1.1.1.19 | SnmpAdminString | RC | none | |||||||||||||||||
column · SnmpAdminString · read-create · current This object specifies the interface, which would be used for the multicast traffic for all the clients that are associated to this WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanMulticastDirectEnable | 1.3.6.1.4.1.9.9.512.1.1.1.1.20 | TruthValue | RC | 2 | |||||||||||||||||
column · TruthValue · read-create · current This object specifies whether multicast direct is enabled on the controller for this WLAN. A value of 'true' indicates multicast direct is ON. A value of 'false' indicates multicast direct is turned off for this WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanNACPostureSupport | 1.3.6.1.4.1.9.9.512.1.1.1.1.21 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current This object is used to configure the NAC-Posture support for the WLAN. A value of 'true' indicates that the WLAN supports the NAC-Posture feature. A value of 'false' indicates that the WLAN does not support the NAC-Posture feature. | |||||||||||||||||||||
| CcLWlanMaxClientsAccepted | 1.3.6.1.4.1.9.9.512.1.1.1.1.22 | Unsigned32 | RC | 0 | |||||||||||||||||
column · Unsigned32 · read-create · current This object specifies the maximum number of client connection allowed for this WLAN. A value of 0 indicates that there is no limit on maximum allowed clients for this WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanScanDeferPriority | 1.3.6.1.4.1.9.9.512.1.1.1.1.23 | Bits | RC | 06 | |||||||||||||||||
column · Bits · read-create · current This object specifies the priority of packets that defer the off-channel scan. This is used in off-channel scanning to improve performance for medical devices using Radio Resource Management. Each bit represents a packet type for which off-channel scanning needs to be deferred. bit0 - Best effort. bit1 - Background bit2 - Spare bit3 - Excellent effort bit4 - Controlled load bit5 - Video, less than 100-ms latency and jitter bit6 - Voice, less than 10-ms latency and jitter bit7 - Network control
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanScanDeferTime | 1.3.6.1.4.1.9.9.512.1.1.1.1.24 | Unsigned32 (0..60000) | RC | 100 | |||||||||||||||||
column · Unsigned32 (0..60000) · read-create · current This object specifies the minimum number of milliseconds that must elapse without the appearance of a specified packet before the access point radios begin an off-channel scan.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanLanSubType | 1.3.6.1.4.1.9.9.512.1.1.1.1.25 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current This object specifies the sub-type of the LAN created. This has to be congruent with cLWlanIswired. If cLWlanIswired is set to 'true', allowed values are guestLan(2) and remoteLan(3). If cLWlanIswired is set to 'false', allowed value is wirelessLan(1). A value of other(4) will be returned if it doesnt match any values defined here. This value is not configurable.
| |||||||||||||||||||||
| CcLWlanWebAuthOnMacFilterFailureEnabled | 1.3.6.1.4.1.9.9.512.1.1.1.1.26 | TruthValue | RC | 2 | |||||||||||||||||
column · TruthValue · read-create · current This object is used to configure the Web based authentication on Mac Filter failure support for the WLAN. A value of 'true' enables Web authentication on MAC filter failure for the WLAN. A value of 'false' disables Web authentication on MAC filter failure for the WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanStaticIpTunnelingEnabled | 1.3.6.1.4.1.9.9.512.1.1.1.1.27 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current This object is used to configure the Static IP Tunneling of clients feature support for the WLAN. A value of 'true' enables static IP Tunneling of client for the WLAN. A value of 'false' disables static IP Tunneling of client for the WLAN. | |||||||||||||||||||||
| CcLWlanKtsCacSupportEnabled | 1.3.6.1.4.1.9.9.512.1.1.1.1.28 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current This object is used to configure the KTS CAC support for the WLAN. A value of 'true' enables the KTS based CAC support for this wlan. A value of 'false' disables the KTS based CAC support for this wlan. | |||||||||||||||||||||
| CcLWlanWifiDirectPolicyStatus | 1.3.6.1.4.1.9.9.512.1.1.1.1.29 | INTEGER | RC | disable(1) | |||||||||||||||||
column · INTEGER · read-create · current This object is used to allow/disallow wi-fi direct clients to/from joining the infrastructure network. disable(1) - WFD is completely disabled. allow(2) - allow WFD clients notAllow(3) - controller rejects association request from WFD clients only if it has P2P IE with concurrency enabled. xconnectNotAllow(4) - controller rejects association request from WFD clients only if it has P2P IE with cross-connection enabled
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanWebAuthIPv6AclName | 1.3.6.1.4.1.9.9.512.1.1.1.1.30 | SnmpAdminString (SIZE (0..64)) | RC | | |||||||||||||||||
column · SnmpAdminString (SIZE (0..64)) · read-create · current This object represents the name of the Web Auth IPv6 ACL applied to this WLAN. If it is required to remove the ACL name for a WLAN, it should be set to 'none'. ACL's are applied in the following priority order - interfaces ACLs, WLAN ACLs, client ACLs. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanHotSpot2Enabled | 1.3.6.1.4.1.9.9.512.1.1.1.1.31 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current This object represents the hotSpot2 feature for this WLAN. A value of 'true' enables the HotSpot2 for this wlan. A value of 'false' disables the HotSpot2 for this wlan. | |||||||||||||||||||||
| CcLWlanMaxClientsAllowedPerRadio | 1.3.6.1.4.1.9.9.512.1.1.1.1.32 | Unsigned32 (1..200) | RC | 200 | |||||||||||||||||
column · Unsigned32 (1..200) · read-create · current This object represents the maximum allowed clients per AP radio for a WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanDhcpDeviceProfiling | 1.3.6.1.4.1.9.9.512.1.1.1.1.33 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current This object specifies the status of DHCP Device Profiling feature for this WLAN. A value of 'true' enables DHCP Device Profiling on this wlan. A value of 'false' disables DHCP the Device Profiling on this wlan. | |||||||||||||||||||||
| CcLWlanMacAuthOverDot1xEnabled | 1.3.6.1.4.1.9.9.512.1.1.1.1.34 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current This object specifies the configuration state of authentication failover to Dot1x for the WLAN. A value of 'true' enables mac auth or dot1x for the WLAN. A value of 'false' disables mac auth or dot1x for the WLAN. | |||||||||||||||||||||
| CcLWlanUserTimeout | 1.3.6.1.4.1.9.9.512.1.1.1.1.35 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current This object represents the timeout value of user for a WLAN.
| |||||||||||||||||||||
| CcLWlanUserIdleThreshold | 1.3.6.1.4.1.9.9.512.1.1.1.1.36 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current This object represents the user idle threshold value in bytes for a WLAN.
| |||||||||||||||||||||
| CcLWlanHttpDeviceProfiling | 1.3.6.1.4.1.9.9.512.1.1.1.1.37 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current This object specifies the status of HTTP Device Profiling feature for this WLAN. A value of 'true' enables HTTP Device Profiling on this wlan. A value of 'false' disables the HTTP Device Profiling on this wlan. | |||||||||||||||||||||
| CcLWlanHotSpotClearConfig | 1.3.6.1.4.1.9.9.512.1.1.1.1.38 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current This object is used to clear all the configuration related to HotSpot feature at WLAN level. A value of 'enable' would clear the configuration. When queries for the current value, always 'disable' would be returned.
| |||||||||||||||||||||
| CcLWlanRadiusAuthFourthServer | 1.3.6.1.4.1.9.9.512.1.1.1.1.39 | DisplayString (SIZE (0..21)) | RC | ||||||||||||||||||
column · DisplayString (SIZE (0..21)) · read-create · current This object specifies the Fourth Radius Authentication Server for this wlan. | |||||||||||||||||||||
| CcLWlanRadiusAuthFifthServer | 1.3.6.1.4.1.9.9.512.1.1.1.1.40 | DisplayString (SIZE (0..21)) | RC | ||||||||||||||||||
column · DisplayString (SIZE (0..21)) · read-create · current This object specifies the Fifth Radius Authentication Server for this wlan. | |||||||||||||||||||||
| CcLWlanRadiusAuthSixthServer | 1.3.6.1.4.1.9.9.512.1.1.1.1.41 | DisplayString (SIZE (0..21)) | RC | ||||||||||||||||||
column · DisplayString (SIZE (0..21)) · read-create · current This object specifies the Sixth Radius Authentication Server for this wlan. | |||||||||||||||||||||
| CcLWlanRadiusAcctFourthServer | 1.3.6.1.4.1.9.9.512.1.1.1.1.42 | DisplayString (SIZE (0..21)) | RC | ||||||||||||||||||
column · DisplayString (SIZE (0..21)) · read-create · current This object specifies the Fourth Radius Accounting Server for this wlan. | |||||||||||||||||||||
| CcLWlanRadiusAcctFifthServer | 1.3.6.1.4.1.9.9.512.1.1.1.1.43 | DisplayString (SIZE (0..21)) | RC | ||||||||||||||||||
column · DisplayString (SIZE (0..21)) · read-create · current This object specifies the Fifth Radius Accounting Server for this wlan. | |||||||||||||||||||||
| CcLWlanRadiusAcctSixthServer | 1.3.6.1.4.1.9.9.512.1.1.1.1.44 | DisplayString (SIZE (0..21)) | RC | ||||||||||||||||||
column · DisplayString (SIZE (0..21)) · read-create · current This object specifies the Sixth Radius Accounting Server for this wlan. | |||||||||||||||||||||
| CcLWlanSelfAnchorEnabled | 1.3.6.1.4.1.9.9.512.1.1.1.1.64 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current This object specifies whether self anchoring is enabled for the wlan. | |||||||||||||||||||||
| CcLWlanUniversalAdmin | 1.3.6.1.4.1.9.9.512.1.1.1.1.65 | TruthValue | RC | 2 | |||||||||||||||||
column · TruthValue · read-create · current This object allows universal admin mode. to be enabled on a 802.1X/WPA/WPA2 secured WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlan11acMuMimoEnabled | 1.3.6.1.4.1.9.9.512.1.1.1.1.66 | TruthValue | RC | 1 | |||||||||||||||||
column · TruthValue · read-create · current This object is used to configure 11ac Mu Mimo mode for the WLAN. A value of 'true' enables Mu Mimo mode for the WLAN. A value of 'false' disables Mu Mimo mode for the WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlan11vDisassocImmiEnable | 1.3.6.1.4.1.9.9.512.1.1.1.1.67 | TruthValue | RC | 2 | |||||||||||||||||
column · TruthValue · read-create · current This object indicates whether 11v BSS Transition Disassociation Imminent is enabled on the controller for this WLAN. A value of 'true' indicates Disassociation Imminent is enabled for the WLAN. A value of 'false' indicates Disassociation Imminent is disabled for the WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlan11vDisassocTimer | 1.3.6.1.4.1.9.9.512.1.1.1.1.73 | Unsigned32 | RO | 200 | |||||||||||||||||
column · Unsigned32 · read-only · current This object indicates 11v BSS Transition Disassociation Imminent timer for this WLAN.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlan11vOpRoamDisassocTimer | 1.3.6.1.4.1.9.9.512.1.1.1.1.74 | Unsigned32 (0..40) | RO | 40 | |||||||||||||||||
column · Unsigned32 (0..40) · read-only · current This object indicates 11v BSS Transition Optimized Roaming Disassociation Imminent timer for this WLAN.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlan11kAssistedRoamingEnable | 1.3.6.1.4.1.9.9.512.1.1.1.1.84 | TruthValue | RC | 2 | |||||||||||||||||
column · TruthValue · read-create · current This object specifies whether 11k Assisted Roaming Prediction Optimization is enabled on the controller for this WLAN. A value of 'true' enables 11k Assisted Roaming Prediction A value of 'false' disables 11k Assisted Roaming Prediction Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlan11kNeighborListEnable | 1.3.6.1.4.1.9.9.512.1.1.1.1.85 | TruthValue | RC | 1 | |||||||||||||||||
column · TruthValue · read-create · current This object specifies whether 11k Neighbor List is enabled on the controller for this WLAN. A value of 'true' enables 11k Neighbor list A value of 'false' disables 11k Neighbor list Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlan11kDualbandNeigListEnable | 1.3.6.1.4.1.9.9.512.1.1.1.1.86 | TruthValue | RC | 2 | |||||||||||||||||
column · TruthValue · read-create · current This object specifies whether 11k Neighbor List Dual Band is enabled on the controller for this WLAN. A value of 'true' enables 11k Neighbor list dual band A value of 'false' disables 11k Neighbor list dual band Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlan11vDMSEnable | 1.3.6.1.4.1.9.9.512.1.1.1.1.87 | TruthValue | RC | 1 | |||||||||||||||||
column · TruthValue · read-create · current This object specifies whether 11v Directed Multicast Service is enabled on the controller for this WLAN. A value of 'true' indicates that 11v Directed Multicast Service is enabled. A value of 'false' indicates that 11v Directed Multicast Service is disabled. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlan11vBssTransEnable | 1.3.6.1.4.1.9.9.512.1.1.1.1.93 | TruthValue | RC | 1 | |||||||||||||||||
column · TruthValue · read-create · current This object indicates whether 11v BSS Transition is enabled on the controller for this WLAN. A value of 'true' indicates BSS Transition is enabled for the WLAN. A value of 'false' indicates BSS Transition is disabled for the WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanEapProfileName | 1.3.6.1.4.1.9.9.512.1.1.1.1.96 | SnmpAdminString (SIZE (0..64)) | RC | | |||||||||||||||||
column · SnmpAdminString (SIZE (0..64)) · read-create · current This object specifies the Eap profile name configured for this WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanSetEapProfileName | 1.3.6.1.4.1.9.9.512.1.1.1.1.97 | TruthValue | RW | 2 | |||||||||||||||||
column · TruthValue · read-write · current This object specifies whether eap profile name is set or not on the controller for this WLAN. A value of 'true' specifies eap profile name is set A value of 'false' specifies eap profile name is not set Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanMaxClientsAllowedPerAP | 1.3.6.1.4.1.9.9.512.1.1.1.1.98 | Unsigned32 (0..400) | RC | 0 | |||||||||||||||||
column · Unsigned32 (0..400) · read-create · current This object represents the maximum allowed clients per AP radio for a WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanMdnsMode | 1.3.6.1.4.1.9.9.512.1.1.1.1.99 | INTEGER | RW | gateway(2) | |||||||||||||||||
column · INTEGER · read-write · current This object represents the mdns mode of the WLAN 0 indicates WLAN is in Bridge mode for mDNS packets 1 indicates WLAN is is Drop mode for mdns packets 2 indicates WLAN is in Gateway mode for mDNS packets
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanOpportunisticKeyCaching | 1.3.6.1.4.1.9.9.512.1.1.1.1.100 | TruthValue | RW | 1 | |||||||||||||||||
column · TruthValue · read-write · current This object specifies whether Oppurtunistic Key Caching is set or not on the controller for this WLAN. A value of 'true' specifies Oppurtunistic Key Caching is set A value of 'false' specifies Oppurtunistic Key Caching is not set Example values from LibreNMS test devices
| |||||||||||||||||||||
| TcLWlanConfigClientTable | 1.3.6.1.4.1.9.9.512.1.1.2 | NA | |||||||||||||||||||
table · not-accessible · current This table represents the WLAN configuration for the 802.11 wireless clients that are associated with the APs that have joined this controller. The creation of a new row in cLWlanConfigTable, through an explicit network management action, results in creation of an entry in this table. Similarly, deletion of a row in cLWlanConfigTable through user action causes the deletion of corresponding row in this table. This table has an one-to-one relationship with cLWlanConfigTable. There exists an entry in this table for each corresponding entry in the cLWlanConfigTable. | |||||||||||||||||||||
| RcLWlanConfigClientEntry | 1.3.6.1.4.1.9.9.512.1.1.2.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry represents a conceptual row in this table and provides the information about the clients associated on the WLAN, uniquely identified by the cLWlanIndex.
| |||||||||||||||||||||
| CcLWlanClientAclName | 1.3.6.1.4.1.9.9.512.1.1.2.1.1 | DisplayString (SIZE (0..64)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..64)) · read-write · current This object represents the name of the ACL applied to this WLAN. If it is required to remove the ACL name for a WLAN, it should be set to 'none'. ACL's are applied in the following priority order - interfaces ACLs, WLAN ACLs, client ACLs. | |||||||||||||||||||||
| CcLWlanP2PBlocking | 1.3.6.1.4.1.9.9.512.1.1.2.1.2 | INTEGER | RW | disable(1) | |||||||||||||||||
column · INTEGER · read-write · current This object represents per WLAN peer-to-peer
blocking behavior on controller. Peer-to-peer
blocking means traffic between two clients on
same VLAN will not be bridged.
disable : Peer-to-peer blocking is disabled
and traffic is bridged locally
within the controller.
drop : The packet will be discarded.
forwardUp : The packet will be forwarded on the
upstream VLAN. The device 'north' of
the controller can then make the
decision about what to do with the
packet.
allowPvtGrp : The packet will be bridged if both
source and destination have same 'ipsk-tag',
if mac-filtering is disabled the packet
will be discarded.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanClientIPv6AclName | 1.3.6.1.4.1.9.9.512.1.1.2.1.3 | DisplayString (SIZE (0..64)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..64)) · read-write · current This object represents the name of the IPv6 ACL applied to this WLAN. If it is required to remove the ACL name for a WLAN, it should be set to 'none'. ACL's are applied in the following priority order - interfaces ACLs, WLAN ACLs, client ACLs. | |||||||||||||||||||||
| TcLWlanConfigQosTable | 1.3.6.1.4.1.9.9.512.1.1.3 | NA | |||||||||||||||||||
table · not-accessible · current This table represents the QoS configuration for the WLAN. The creation of a new row in cLWlanConfigTable, through an explicit network management action, results in creation of an entry in this table. Similarly, deletion of a row in cLWlanConfigTable through user action causes the deletion of corresponding row in this table. This table has an one-to-one relationship with cLWlanConfigTable. There exists an entry in this table for each corresponding entry in the cLWlanConfigTable. | |||||||||||||||||||||
| RcLWlanConfigQosEntry | 1.3.6.1.4.1.9.9.512.1.1.3.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry represents a conceptual row in this table and provides the information about the QoS parameters on the WLAN, uniquely identified by the cLWlanIndex.
| |||||||||||||||||||||
| CcLWlanClientDSAverageDataRate | 1.3.6.1.4.1.9.9.512.1.1.3.1.1 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies Average Data Rate per user on downstream. Value of 0 indicates the feature is disabled. | |||||||||||||||||||||
| CcLWlanClientUSAverageDataRate | 1.3.6.1.4.1.9.9.512.1.1.3.1.2 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies Average Data Rate per user on upstream. Value of 0 indicates the feature is disabled. | |||||||||||||||||||||
| CcLWlanClientDSBurstDataRate | 1.3.6.1.4.1.9.9.512.1.1.3.1.3 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies Burst Data Rate per user on downstream. Value of 0 indicates the feature is disabled. | |||||||||||||||||||||
| CcLWlanClientUSBurstDataRate | 1.3.6.1.4.1.9.9.512.1.1.3.1.4 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies Burst Data Rate per user on upstream. Value of 0 indicates the feature is disabled. | |||||||||||||||||||||
| CcLWlanClientDSAvgRealTimeDataRate | 1.3.6.1.4.1.9.9.512.1.1.3.1.5 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies average real time Data Rate per user on downstream. Value of 0 indicates the feature is disabled. | |||||||||||||||||||||
| CcLWlanClientUSAvgRealTimeDataRate | 1.3.6.1.4.1.9.9.512.1.1.3.1.6 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies average real time Data Rate per user on upstream. Value of 0 indicates the feature is disabled. | |||||||||||||||||||||
| CcLWlanClientDSBurstRealTimeDataRate | 1.3.6.1.4.1.9.9.512.1.1.3.1.7 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies burst real time Data Rate per user on downstream. Value of 0 indicates the feature is disabled. | |||||||||||||||||||||
| CcLWlanClientUSBurstRealTimeDataRate | 1.3.6.1.4.1.9.9.512.1.1.3.1.8 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies burst real time Data Rate per user on upstream. Value of 0 indicates the feature is disabled. | |||||||||||||||||||||
| CcLWlanSsidDSAverageDataRate | 1.3.6.1.4.1.9.9.512.1.1.3.1.9 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies Average Data Rate per user on downstream. Value of 0 indicates the feature is disabled. | |||||||||||||||||||||
| CcLWlanSsidUSAverageDataRate | 1.3.6.1.4.1.9.9.512.1.1.3.1.10 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies Average Data Rate per user on upstream. Value of 0 indicates the feature is disabled. | |||||||||||||||||||||
| CcLWlanSsidDSBurstDataRate | 1.3.6.1.4.1.9.9.512.1.1.3.1.11 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies Burst Data Rate per user on downstream. Value of 0 indicates the feature is disabled. | |||||||||||||||||||||
| CcLWlanSsidUSBurstDataRate | 1.3.6.1.4.1.9.9.512.1.1.3.1.12 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies Burst Data Rate per user on upstream. Value of 0 indicates the feature is disabled. | |||||||||||||||||||||
| CcLWlanSsidDSAvgRealTimeDataRate | 1.3.6.1.4.1.9.9.512.1.1.3.1.13 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies average real time Data Rate per user on downstream. Value of 0 indicates the feature is disabled. | |||||||||||||||||||||
| CcLWlanSsidUSAvgRealTimeDataRate | 1.3.6.1.4.1.9.9.512.1.1.3.1.14 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies average real time Data Rate per user on upstream. Value of 0 indicates the feature is disabled. | |||||||||||||||||||||
| CcLWlanSsidDSBurstRealTimeDataRate | 1.3.6.1.4.1.9.9.512.1.1.3.1.15 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies burst real time Data Rate per user on downstream. Value of 0 indicates the feature is disabled. | |||||||||||||||||||||
| CcLWlanSsidUSBurstRealTimeDataRate | 1.3.6.1.4.1.9.9.512.1.1.3.1.16 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies burst real time Data Rate per user on upstream. Value of 0 indicates the feature is disabled. | |||||||||||||||||||||
| CcLWlanWlanDSAverageDataRate | 1.3.6.1.4.1.9.9.512.1.1.3.1.17 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies average data rate per wlan on downstream. Value of 0 indicates that feature is disabled.
| |||||||||||||||||||||
| CcLWlanWlanUSAverageDataRate | 1.3.6.1.4.1.9.9.512.1.1.3.1.18 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies average data rate per wlan on upstream. Value of 0 indicates that feature is disabled.
| |||||||||||||||||||||
| CcLWlanWlanDSBurstDataRate | 1.3.6.1.4.1.9.9.512.1.1.3.1.19 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies burst data rate per wlan on downstream. Value of 0 indicates that feature is disabled.
| |||||||||||||||||||||
| CcLWlanWlanUSBurstDataRate | 1.3.6.1.4.1.9.9.512.1.1.3.1.20 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies burst data rate per wlan on upstream. Value of 0 indicates that feature is disabled.
| |||||||||||||||||||||
| CcLWlanWlanDSAvgRealTimeDataRate | 1.3.6.1.4.1.9.9.512.1.1.3.1.21 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies average real time data rate per wlan on downstream. Value of 0 indicates that feature is disabled.
| |||||||||||||||||||||
| CcLWlanWlanUSAvgRealTimeDataRate | 1.3.6.1.4.1.9.9.512.1.1.3.1.22 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies average real time data rate per wlan on upstream. Value of 0 indicates that feature is disabled.
| |||||||||||||||||||||
| CcLWlanWlanDSBurstRealTimeDataRate | 1.3.6.1.4.1.9.9.512.1.1.3.1.23 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies burst real time data rate per wlan on downstream. Value of 0 indicates that feature is disabled.
| |||||||||||||||||||||
| CcLWlanWlanUSBurstRealTimeDataRate | 1.3.6.1.4.1.9.9.512.1.1.3.1.24 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies burst real time data rate per wlan on upstream. Value of 0 indicates that feature is disabled.
| |||||||||||||||||||||
| TcLWlanConfigIosTable | 1.3.6.1.4.1.9.9.512.1.1.4 | NA | |||||||||||||||||||
table · not-accessible · current This table represents the WLAN configuration for IOS profiles configured on the switch. The creation of a new row in cLWlanConfigTable, through an explicit network management action, results in creation of an entry in this table. Similarly, deletion of a row in cLWlanConfigTable through user action causes the deletion of corresponding row in this table. This table has an one-to-one relationship with cLWlanConfigTable. There exists an entry in this table for each corresponding entry in the cLWlanConfigTable. | |||||||||||||||||||||
| RcLWlanConfigIosEntry | 1.3.6.1.4.1.9.9.512.1.1.4.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry represents a conceptual row in this table and provides the information about the clients associated on the WLAN, uniquely identified by the cLWlanIndex.
| |||||||||||||||||||||
| CcLWlanIosAccountingMethodListName | 1.3.6.1.4.1.9.9.512.1.1.4.1.1 | SnmpAdminString (SIZE (0..64)) | RW | ||||||||||||||||||
column · SnmpAdminString (SIZE (0..64)) · read-write · current This object represents the method list name used for accounting on this WLAN. | |||||||||||||||||||||
| CcLWlanIosAuthenticationMethodListName | 1.3.6.1.4.1.9.9.512.1.1.4.1.2 | SnmpAdminString (SIZE (0..64)) | RW | NAI_ISE | |||||||||||||||||
column · SnmpAdminString (SIZE (0..64)) · read-write · current This object represents the method list name used for 802.1x authentication on this WLAN. This could be LDAP, RADIUS, LOCAL AUTH. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanIosMacFilteringMethodListName | 1.3.6.1.4.1.9.9.512.1.1.4.1.3 | SnmpAdminString (SIZE (0..64)) | RW | | |||||||||||||||||
column · SnmpAdminString (SIZE (0..64)) · read-write · current This object represents the method list name used for mac filtering on this WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanIosWebAuthMethodListName | 1.3.6.1.4.1.9.9.512.1.1.4.1.4 | SnmpAdminString (SIZE (0..64)) | RW | | |||||||||||||||||
column · SnmpAdminString (SIZE (0..64)) · read-write · current This object represents the method list name used for WEB AUTH on this WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanIosQosUpStreamProfileName | 1.3.6.1.4.1.9.9.512.1.1.4.1.5 | SnmpAdminString (SIZE (0..64)) | RW | QosUpStream | |||||||||||||||||
column · SnmpAdminString (SIZE (0..64)) · read-write · current This object represents the profile name used for upstream QOS configuration on this WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanIosQosDownStreamProfileName | 1.3.6.1.4.1.9.9.512.1.1.4.1.6 | SnmpAdminString (SIZE (0..64)) | RW | QosDownStream | |||||||||||||||||
column · SnmpAdminString (SIZE (0..64)) · read-write · current This object represents the profile name used for downstream QOS configuration on this WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanIngressDHCPOption82Format | 1.3.6.1.4.1.9.9.512.1.1.4.1.7 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object represents the DHCP Option82 format for this WLAN. | |||||||||||||||||||||
| CcLWlanIngressDHCPOption82Ascii | 1.3.6.1.4.1.9.9.512.1.1.4.1.8 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object represents the DHCP Option82 Ascii option for this WLAN. | |||||||||||||||||||||
| CcLWlanIngressDHCPOption82Rid | 1.3.6.1.4.1.9.9.512.1.1.4.1.9 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object represents the DHCP Option82 Rid option for this WLAN. | |||||||||||||||||||||
| CcLWlanIngressDHCPOption82Enable | 1.3.6.1.4.1.9.9.512.1.1.4.1.10 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object represents the DHCP Option82 state for this WLAN. | |||||||||||||||||||||
| CcLWlanIosScanDeferPriority | 1.3.6.1.4.1.9.9.512.1.1.4.1.11 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies the priority of packets that defer the off-channel scan. This is used in off-channel scanning to improve performance for medical devices using Radio Resource Management. Each bit represents a packet type for which off-channel scanning needs to be deferred. | |||||||||||||||||||||
| CcLWlanIosWebAuthParameterMapName | 1.3.6.1.4.1.9.9.512.1.1.4.1.12 | SnmpAdminString | RW | | |||||||||||||||||
column · SnmpAdminString · read-write · current This object represents the web auth parameter name on this WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanIosQosClientUpStreamProfileName | 1.3.6.1.4.1.9.9.512.1.1.4.1.13 | SnmpAdminString (SIZE (0..64)) | RW | ||||||||||||||||||
column · SnmpAdminString (SIZE (0..64)) · read-write · current This object represents the profile name used for upstream QOS client configuration on this WLAN. | |||||||||||||||||||||
| CcLWlanIosQosClientDownStreamProfileName | 1.3.6.1.4.1.9.9.512.1.1.4.1.14 | SnmpAdminString (SIZE (0..64)) | RW | ||||||||||||||||||
column · SnmpAdminString (SIZE (0..64)) · read-write · current This object represents the profile name used for downstream QOS client configuration on this WLAN. | |||||||||||||||||||||
| CcLWlanIosAuthorizationMethodListName | 1.3.6.1.4.1.9.9.512.1.1.4.1.15 | SnmpAdminString (SIZE (0..64)) | RW | | |||||||||||||||||
column · SnmpAdminString (SIZE (0..64)) · read-write · current This object represents the method list name used for 802.1x authorization on this WLAN. This could be LDAP, RADIUS, LOCAL AUTH. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanIosWebAuthAuthorizationMethodListName | 1.3.6.1.4.1.9.9.512.1.1.4.1.16 | SnmpAdminString (SIZE (0..64)) | RW | | |||||||||||||||||
column · SnmpAdminString (SIZE (0..64)) · read-write · current This object represents the method list name used for webauth authorization on this WLAN. This could be LDAP, RADIUS, LOCAL AUTH. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlanIosMacOverrideMethodListName | 1.3.6.1.4.1.9.9.512.1.1.4.1.17 | SnmpAdminString (SIZE (0..64)) | RW | | |||||||||||||||||
column · SnmpAdminString (SIZE (0..64)) · read-write · current This object represents the method list name used for mab authorization on this WLAN. This could be LDAP, RADIUS, LOCAL AUTH. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TcLWlanFlexibleNetflowTable | 1.3.6.1.4.1.9.9.512.1.1.5 | NA | |||||||||||||||||||
table · not-accessible · current This table represents the flexible netflow policy details per WLAN for AVC. The creation of a new row in cLWlanFlexibleConfigTable, through an explicit network management action, results in creation of an entry in this table. Similarly, deletion of a row in cLWlanConfigTable through user action causes the deletion of corresponding rows in this table. For each wlan, there will be zero to many instances of flexible netflow policies. | |||||||||||||||||||||
| RcLWlanFlexibleNetflowEntry | 1.3.6.1.4.1.9.9.512.1.1.5.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry represents a conceptual row in this table and provides the information about the flexible netflow policy types associated on the WLAN, uniquely identified by the cLWlanIndex and cLWlanFlexibleNetflowPolicyTypeIndex. | |||||||||||||||||||||
| CcLWlanFlexibleNetflowPolicyTypeIndex | 1.3.6.1.4.1.9.9.512.1.1.5.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current This object is used to set the netflow traffic direction for AVC. none(0) capture no traffic IPV4 Input Policy(1) - IPV4 input policy IPV4OutputPolicy(2) - IPV4 output policy IPV6InputPolicy(3) - IPV6 input policy IPV6OutputPolicy(4) - IPV6 output policy DatalinkInputPolicy(5) - Datalink input policy DatalinkOutputPolicy(6) - Datalink output policy.
| |||||||||||||||||||||
| CcLWlanFlexibleNetflowMonitorName | 1.3.6.1.4.1.9.9.512.1.1.5.1.2 | SnmpAdminString | RC | ||||||||||||||||||
column · SnmpAdminString · read-create · current This object represents the flexible netflow monitor name assigned to this WLAN. | |||||||||||||||||||||
| CcLWlanFlexibleNetflowRowStatus | 1.3.6.1.4.1.9.9.512.1.1.5.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row Status for creation/deletion of a particular flexible netflow policy entry from the table | |||||||||||||||||||||
| TcLWlan11axConfigTable | 1.3.6.1.4.1.9.9.512.1.1.9 | NA | |||||||||||||||||||
table · not-accessible · current This table represents the WLAN configuration for the 802.11ax APs that have joined this controller. The creation of a new row in cLWlanConfigTable, through an explicit network management action, results in creation of an entry in this table. Similarly, deletion of a row in cLWlanConfigTable through user action causes the deletion of corresponding row in this table. This table has an one-to-one relationship with cLWlanConfigTable. There exists an entry in this table for each corresponding entry in the cLWlanConfigTable. | |||||||||||||||||||||
| RcLWlan11axConfigEntry | 1.3.6.1.4.1.9.9.512.1.1.9.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry represents a conceptual row in this table and provides the information about the clients associated on the WLAN, uniquely identified by the cLWlanIndex.
| |||||||||||||||||||||
| CcLWlan11axMuMimoUplinkEnable | 1.3.6.1.4.1.9.9.512.1.1.9.1.1 | TruthValue | RW | 1 | |||||||||||||||||
column · TruthValue · read-write · current This object specifies whether 11ax Multi User Multiple Input Multiple output Uplink is enabled or disabled for the WLAN. MIMO is an antenna technology for wireless communications in which multiple antennas are used at both the source (transmitter) and the destination (receiver).The 802.11ax Multi-user MIMO allow more users to claim MIMO simultaneously. A value of 'true' indicates that 11ax MU MIMO uplink is enabled on WLAN. A value of 'false' indicates that 11ax MU MIMO uplink is disabled on the WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlan11axMuMimoDownlinkEnable | 1.3.6.1.4.1.9.9.512.1.1.9.1.2 | TruthValue | RW | 1 | |||||||||||||||||
column · TruthValue · read-write · current This object specifies whether 11ax Multi User Multiple Input Multiple Output Downlink is enabled or disabled for the WLAN. MIMO is an antenna technology for wireless communications in which multiple antennas are used at both the source (transmitter) and the destination (receiver).The 802.11ax Multi-user MIMO allow more users to claim MIMO simultaneously. A value of 'true' indicates that 11ax MU MIMO Downlink is enabled on the WLAN. A value of 'false' indicates that 11ax MU MIMO Downlink is disabled on the WLAN Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlan11axOfdmaUplinkEnable | 1.3.6.1.4.1.9.9.512.1.1.9.1.3 | TruthValue | RW | 1 | |||||||||||||||||
column · TruthValue · read-write · current This object specifies whether 11ax Orthogonal Frequency Division Multiple Access uplink is enabled or disabled for the WLAN.OFDMA allows multiple users to transmit simultaneously and share the available bandwidth of a channel where each user is allotted a portion of the available spectrum.This allows the access point to satisfy the data rate requirements of each individual user. A value of 'true' indicates that 11ax OFDMA Uplink is enabled on the WLAN. A value of 'false' indicates that 11ax OFDMA Uplink is disabled on the WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlan11axOfdmaDownlinkEnable | 1.3.6.1.4.1.9.9.512.1.1.9.1.4 | TruthValue | RW | 1 | |||||||||||||||||
column · TruthValue · read-write · current This object specifies whether 11ax Orthogonal Frequency Division Multiple Access downlink is enabled or disabled for the WLAN. OFDMA allows multiple users to transmit simultaneously and share the available bandwidth of a channel where each user is allotted a portion of the available spectrum.This allows the access point to satisfy the data rate requirements of each individual user. A value of 'true' indicates that 11ax OFDMA Downlink is enabled on the WLAN. A value of 'false' indicates that 11ax OFDMA Downlink is disabled on the WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlan11axTargetWaketimeEnable | 1.3.6.1.4.1.9.9.512.1.1.9.1.5 | TruthValue | RW | 2 | |||||||||||||||||
column · TruthValue · read-write · current This object specifies whether 11ax TargetWaketime is enabled or disabled for the WLAN. Target Wake Time (TWT) is a function that permits an AP to define a specific time or set of times for individual stations (associated to this wlan) to access the medium. A value of 'true' indicates that 11ax TargetWaketime is enabled on the WLAN. A value of 'false' indicates that 11ax TargetWaketime is disabled on the WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcLWlan11axBssColorModeEnable | 1.3.6.1.4.1.9.9.512.1.1.9.1.6 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object specifies whether 11ax Basic service set color mode is enabled or disabled for the WLAN. BSS Coloring is a method of reducing medium contention overhead due to overlapping basic service set (OBSS) and spatial reuse. 802.11ax pre-amble assigns a BSS color value(0-255)to each AP so that stations can differentiate between BSSs and new channel access behavior will be assigned based on the color detected. Thereby decreasing interference. A value of 'true' indicates that 11ax Bss color mode is enabled on the WLAN. A value of 'false' indicates tha 11ax Bss color mode is disabled on the WLAN. | |||||||||||||||||||||
| CcLWlan11axBssColorCode | 1.3.6.1.4.1.9.9.512.1.1.9.1.7 | Unsigned32 (0..255) | RW | ||||||||||||||||||
column · Unsigned32 (0..255) · read-write · current This object specifies 11ax Basic service set color code value (0-255) of the WLAN. BSS Coloring is a method of reducing medium contention overhead due to overlapping basic service set (OBSS) and spatial reuse. 802.11ax pre-amble assigns a BSS color value(0-255)to each AP so that stations can differentiate between BSSs and new channel access behavior will be assigned based on the color detected. Thereby decreasing interference. | |||||||||||||||||||||
| CcLWlan11axBssPartialColorEnable | 1.3.6.1.4.1.9.9.512.1.1.9.1.8 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object specifies whether 11ax Basic service set Partial color mode is enabled or disabled for the WLAN. BSS Partial Colorig is method of BSS coloring in which a receiving station identifies the BSS from the AP so that the station can use the channel access rules or reduce power consumption. A value of 'true' indicates 11ax Bss Partial color mode is enabled on the WLAN. A value of 'false' indicates 11ax Bss Partial color mode is disabled on the WLAN. | |||||||||||||||||||||
| CcLWlan11axTwtBroadcastSupport | 1.3.6.1.4.1.9.9.512.1.1.9.1.9 | TruthValue | RW | 2 | |||||||||||||||||
column · TruthValue · read-write · current This object specifies whether 11ax TargetWaketime broadcast support is enabled or disabled for the WLAN. Target Wake Time (TWT) broadcast support is a function that permits an AP to support broadcast method on a wlan for an individual station (associated to this wlan) to access the medium. A value of 'true' indicates that 11ax TargetWaketime broadcast support is enabled on the WLAN. A value of 'false' indicates that 11ax TargetWaketime broadcast support is disabled on the WLAN. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NciscoLwappAPGroupsVlanConfig | 1.3.6.1.4.1.9.9.512.1.2 | ||||||||||||||||||||
| TcLAPGroupsVlanConfigTable | 1.3.6.1.4.1.9.9.512.1.2.1 | NA | |||||||||||||||||||
table · not-accessible · current A table for the WLAN-interface-mappings and WLAN-NAC settings allowed for each configured site. Each site can have a set of WLANs associated with it. Rows are added or deleted by explicit management actions initiated by the user from a network management station through the cLAPGroupsVlanConfigRowStatus object. | |||||||||||||||||||||
| RcLAPGroupsVlanConfigEntry | 1.3.6.1.4.1.9.9.512.1.2.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in cLAPGroupsVlanMappingTable. cLWlanProfileName is mandatory for creating a entry in cLWlanConfigEntry. | |||||||||||||||||||||
| CcLAPGroupName | 1.3.6.1.4.1.9.9.512.1.2.1.1.1 | OCTET STRING (SIZE (1..64)) | NA | ||||||||||||||||||
column · OCTET STRING (SIZE (1..64)) · not-accessible · current This object uniquely identifies a AP group. The string is an unique name assigned to a site. | |||||||||||||||||||||
| CcLAPGroupsVlanMappingInterfaceName | 1.3.6.1.4.1.9.9.512.1.2.1.1.2 | OCTET STRING (SIZE (1..32)) | RC | deprecated | |||||||||||||||||
column · OCTET STRING (SIZE (1..32)) · read-create · deprecated This object represents the interface to be used when a client connects to the 'cLWlanProfileName' WLAN on the AP. When an AP is associated with a site, and the site has an associated set of WLANs, then only those WLANs are beamed by the AP. cLAPGroupsVlanMappingInterfaceName object is superseded by cLAPGroupsVlanMappingInterfaceNameRev1. | |||||||||||||||||||||
| CcLAPGroupNACSupport | 1.3.6.1.4.1.9.9.512.1.2.1.1.3 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current This object is used to configure the NAC- Out Of Band(OOB) support for this AP groups VLAN. A value of 'true' indicates that the AP group supports the NAC- Out Of Band(OOB) feature. A value of 'false' indicates that the AP group does not support the NAC- Out Of Band(OOB) feature. | |||||||||||||||||||||
| CcLAPGroupsVlanConfigRowStatus | 1.3.6.1.4.1.9.9.512.1.2.1.1.4 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current This is the status column for this row and used to create and delete specific instances of rows in this table. | |||||||||||||||||||||
| CcLAPGroupsVlanConfigStorageType | 1.3.6.1.4.1.9.9.512.1.2.1.1.5 | StorageType | RC | ||||||||||||||||||
column · StorageType · read-create · current This object represnts the storage type for this conceptual row. | |||||||||||||||||||||
| CcLAPGroupsWlanOrderIndex | 1.3.6.1.4.1.9.9.512.1.2.1.1.6 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current This object represnts the position of a wlan in each AP group. When a WLAN is added to an AP group, it will be placed in the lowest available slot in an array of size 16. This index will determine the order in which the WLAN is applied on an AP in that group. | |||||||||||||||||||||
| CcLAPGroupsVlanMappingInterfaceNameRev1 | 1.3.6.1.4.1.9.9.512.1.2.1.1.7 | OCTET STRING (SIZE (1..128)) | RC | ||||||||||||||||||
column · OCTET STRING (SIZE (1..128)) · read-create · current This object represents the interface to be used when a client connects to the 'cLWlanProfileName' WLAN on the AP. When an AP is associated with a site, and the site has an associated set of WLANs, then only those WLANs are beamed by the AP. | |||||||||||||||||||||
| TcLAPGroupsVenueConfigTable | 1.3.6.1.4.1.9.9.512.1.2.2 | NA | |||||||||||||||||||
table · not-accessible · current A table for the configuring Venue details for a configured site. | |||||||||||||||||||||
| RcLAPGroupsVenueConfigEntry | 1.3.6.1.4.1.9.9.512.1.2.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in cLAPGroupsVlanMappingTable. cLWlanProfileName is mandatory for creating a entry in cLWlanConfigEntry.
| |||||||||||||||||||||
| CcLAPGroupsVenueConfigVenueGroup | 1.3.6.1.4.1.9.9.512.1.2.2.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object indicates the venue group for this AP Group.
| |||||||||||||||||||||
| CcLAPGroupsVenueConfigVenueType | 1.3.6.1.4.1.9.9.512.1.2.2.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object indicates the venue type within
a particular venue group,for this AP Group.
The Venue group-Venue Type relationship is per
the following table:
Venue Group Venue Type Code Venue Description
=========== =============== =================
0 0 Unspecified
0 1-255 Reserved
1 0 Unspecified Assembly
1 1 Arena
1 2 Stadium
1 3 Passenger Terminal (e.g.,
airport, port, bus station,
ferry terminal, train station)
1 4 Amphitheater
1 5 Amusement Park
1 6 Place of Worship
1 7 Convention Center
1 8 Library
1 9 Museum
1 10 Restaurant
1 11 Theater
1 12 Bar
1 13 Coffee Shop
1 14 Zoo or Aquarium
1 15 Emergency Coordination Center
1 16-255 Reserved
2 0 Unspecified Business
2 1 Doctor or Dentist office
2 2 Bank
2 3 Fire Station
2 4 Police Station
2 6 Post Office
2 7 Professional Office
2 8 Research and Development
Facility
2 9 Attorney Office
2 10-255 Reserved
3 0 Unspecified Educational
3 1 School, Primary
3 2 School, Secondary
3 3 University or College
3 4-255 Reserved
4 0 Unspecified Factory and
Industrial Factory
4 2-255 Reserved
5 0 Unspecified Institutional
5 1 Hospital
5 2 Long-Term Care Facility (e.g.,
Nursing home, Hospice, etc.)
5 3 Alcohol and Drug Re-habilitation
Center
5 4 Group Home
5 5 Prison or Jail
5 6-255 Reserved
6 0 Unspecified Mercantile
6 1 Retail Store
6 2 Grocery Market
6 3 Automotive Service Station
6 4-255 Reserved
7 0 Unspecified Residential
7 1 Hotel or Motel
7 2 Dormitory
7 3 Boarding House
7 4-255 Reserved
8 0-255 Reserved
9 0-255 Reserved
10 0 Unspecified Vehicular
10 1 Automobile or Truck
10 2 Airplane
10 3 Bus
10 4 Ferry
10 5 Ship or Boat
10 6 Train
10 7-255 Reserved
11 0 Unspecified Outdoor
11 1 Muni-mesh Network
11 2 City Park
11 3-255 Reserved
| |||||||||||||||||||||
| CcLAPGroupsVenueConfigVenueName | 1.3.6.1.4.1.9.9.512.1.2.2.1.3 | SnmpAdminString (SIZE (0..252)) | RW | ||||||||||||||||||
column · SnmpAdminString (SIZE (0..252)) · read-write · current This is the venue name defined for this AP Group. | |||||||||||||||||||||
| CcLAPGroupsVenueConfigLanguage | 1.3.6.1.4.1.9.9.512.1.2.2.1.4 | SnmpAdminString (SIZE (0..3)) | RW | ||||||||||||||||||
column · SnmpAdminString (SIZE (0..3)) · read-write · current This is the Language defined for this AP Group. | |||||||||||||||||||||
| CcLAPGroupsOperatingClass | 1.3.6.1.4.1.9.9.512.1.2.2.1.5 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current This object specifies the the group of channels on the frequency band(s) the access network operates.
| |||||||||||||||||||||
| TcLAPGroupsMultipleVenueTable | 1.3.6.1.4.1.9.9.512.1.2.3 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuring multiple venues for a configured site. | |||||||||||||||||||||
| RcLAPGroupsMultipleVenueEntry | 1.3.6.1.4.1.9.9.512.1.2.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in cLAPGroupsMultipleVenueTable. cLAPGroupsMultipleVenueLanguage is mandatory for creating a row in this table. | |||||||||||||||||||||
| CcLAPGroupsMultipleVenueLanguage | 1.3.6.1.4.1.9.9.512.1.2.3.1.1 | SnmpAdminString (SIZE (0..3)) | NA | ||||||||||||||||||
column · SnmpAdminString (SIZE (0..3)) · not-accessible · current This is the Language defined for the particular venue name entry. | |||||||||||||||||||||
| CcLAPGroupsMultipleVenueName | 1.3.6.1.4.1.9.9.512.1.2.3.1.2 | SnmpAdminString (SIZE (0..252)) | RC | ||||||||||||||||||
column · SnmpAdminString (SIZE (0..252)) · read-create · current This is the one of the venue names defined for this AP Group. | |||||||||||||||||||||
| CcLAPGroupsMultipleVenueRowStatus | 1.3.6.1.4.1.9.9.512.1.2.3.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row Status for creation/deletion of a particular venue entry in the table. | |||||||||||||||||||||
| TcLAPGroupsPolicyTable | 1.3.6.1.4.1.9.9.512.1.2.4 | NA | |||||||||||||||||||
table · not-accessible · current A table for the policies to be mapped to each AP group on the controller. Rows are added or deleted by explicit management actions initiated by the user from a network management station through the cLAPGroupsPolicyRowStatus object. | |||||||||||||||||||||
| RcLAPGroupsPolicyEntry | 1.3.6.1.4.1.9.9.512.1.2.4.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in cLAPGroupsPolicyTable | |||||||||||||||||||||
| CcLAPGroupsPolicyWlanId | 1.3.6.1.4.1.9.9.512.1.2.4.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current This object specifies the Index of the WLAN on which the Policy will get applied. The WLAN should be present on the AP group. | |||||||||||||||||||||
| CcLAPGroupsPolicyPriIndex | 1.3.6.1.4.1.9.9.512.1.2.4.1.2 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current This object represents the Priority Index of the policy
configured on the AP Group. The Policies will
get applied in the order of the priority index. | |||||||||||||||||||||
| CcLAPGroupsPolicyIndex | 1.3.6.1.4.1.9.9.512.1.2.4.1.3 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current This object uniquely specifies a Policy Added to an AP group. | |||||||||||||||||||||
| CcLAPGroupsPolicyWlanProfile | 1.3.6.1.4.1.9.9.512.1.2.4.1.4 | SnmpAdminString (SIZE (1..64)) | RO | ||||||||||||||||||
column · SnmpAdminString (SIZE (1..64)) · read-only · current This object represents the profile name assigned to this WLAN. This value is assigned during wlan creation using cLWlanProfileName. | |||||||||||||||||||||
| CcLAPGroupsPolicyRowStatus | 1.3.6.1.4.1.9.9.512.1.2.4.1.5 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current This object specifies the Row Status for creation/deletion of a particular venue entry in the table. | |||||||||||||||||||||
| TcLAPGroupQinqConfigTable | 1.3.6.1.4.1.9.9.512.1.2.5 | NA | |||||||||||||||||||
table · not-accessible · current A table for the configuring QinQ for an AP group, QinQ is used to append an external VLAN tag for client based on AP Group | |||||||||||||||||||||
| RcLAPGroupQinqConfigEntry | 1.3.6.1.4.1.9.9.512.1.2.5.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in cLAPGroupQinqConfigTable for the configuring QinQ for an AP group, QinQ is used to append an external VLAN tag for client which connected to the AP that belong to this AP Group
| |||||||||||||||||||||
| CcLAPGroupTrafficQinqEnabled | 1.3.6.1.4.1.9.9.512.1.2.5.1.1 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object specifies the QinQ state for this AP group QinQ is used to append an external VLAN tag for client which connected to the AP that belong to this AP Group - A value of 'true' indicates QinQ is enabled. - A value of 'false' indicates the QinQ is disabled. | |||||||||||||||||||||
| CcLAPGroupDhcpQinqEnabled | 1.3.6.1.4.1.9.9.512.1.2.5.1.2 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object specifies the QinQ state for this AP group QinQ is used to append an external VLAN tag for client which connected to the AP that belong to this AP Group - A value of 'true' indicates that dhcp QinQ is enabled. - A value of 'false indicates that dhcp QinQ is disabled. | |||||||||||||||||||||
| CcLAPGroupQinqServiceVlanId | 1.3.6.1.4.1.9.9.512.1.2.5.1.3 | Integer32 (1..4095) | RW | ||||||||||||||||||
column · Integer32 (1..4095) · read-write · current This object specifies the QinQ service vlan ID for this AP group | |||||||||||||||||||||
| TcLAPGroupConfigTable | 1.3.6.1.4.1.9.9.512.1.2.6 | NA | |||||||||||||||||||
table · not-accessible · current A table for configuring general parameters for an AP group | |||||||||||||||||||||
| RcLAPGroupConfigEntry | 1.3.6.1.4.1.9.9.512.1.2.6.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in cLAPGroupConfigTable for configuring general parameters for an AP group
| |||||||||||||||||||||
| CcLApGroupPreferMode | 1.3.6.1.4.1.9.9.512.1.2.6.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object specifies prefer-mode of AP-Group.
| |||||||||||||||||||||
| CcLApGroupGlobalWebAuthConfig | 1.3.6.1.4.1.9.9.512.1.2.6.1.2 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object specifies whether the web authentication is set per Ap Group or not. A value of 'true' indicates that webauth is enabled on Ap Group. A value of 'false' indicates that webauth is disabled on Ap Group. | |||||||||||||||||||||
| CcLApGroupExternalWebAuthUrl | 1.3.6.1.4.1.9.9.512.1.2.6.1.3 | CiscoURLStringOrEmpty | RW | ||||||||||||||||||
column · CiscoURLStringOrEmpty · read-write · current This object specifies the URL to which the client webpage will be directed for authentication when a client joins the WLAN part of an AP group. | |||||||||||||||||||||
| NciscoLwappWlan11uConfig | 1.3.6.1.4.1.9.9.512.1.3 | ||||||||||||||||||||
| TcLWlan11uTable | 1.3.6.1.4.1.9.9.512.1.3.1 | NA | |||||||||||||||||||
table · not-accessible · current This table represents the generic 802.11u configuration for a particular WLAN in a controller. This table has a one-to-one relationship with cLWlanConfigTable. There exist a row in this table corresponding to each row representing a WLAN in cLWlanConfigTable. | |||||||||||||||||||||
| RcLWlan11uEntry | 1.3.6.1.4.1.9.9.512.1.3.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry in this table represents the generic 802.11u configuration for a WLAN.
| |||||||||||||||||||||
| CcLWlan11uStatus | 1.3.6.1.4.1.9.9.512.1.3.1.1.1 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object is used to configure the 802.11u support for this WLAN. A value of 'true' indicates that 802.11u support is enabled for this WLAN and a value of 'false' indicates that the support is disabled for this WLAN. | |||||||||||||||||||||
| CcLWlan11uInternetAccess | 1.3.6.1.4.1.9.9.512.1.3.1.1.2 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object is used to configure the internet access with respect to 802.11u feature for this WLAN. A value of 'true' indicates that internet access is enabled for this WLAN and a value of 'false' indicates that the internet access is disabled for this WLAN. | |||||||||||||||||||||
| CcLWlan11uNetworkType | 1.3.6.1.4.1.9.9.512.1.3.1.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object indicates the network type with respect
to 802.11u feature , for this WLAN.
invalid (1) : Invalid network type.
private(2) : Non-authorized users are not
permitted on this network.
privateWithGuestAccess(3) : Private network but guest
accounts area available.
chargeablePublicNetwork(4) : The network is accessible to
anyone, however, access to the
network requires payment.
freePublicNetwork(5) : The network is accessible to
anyone and no charges apply
for the network use.
testOrEquipment(6) : The network is used for test or
experimental purposes only.
wildcard(6) : Wildcard network type.
personnalDeviceNetwork(8) : The network is accessible only
by Personnal Device.
emgerencyServiceOnlyNetwork(9) : Emergency Service
network Type.
| |||||||||||||||||||||
| CcLWlan11uVenueGroup | 1.3.6.1.4.1.9.9.512.1.3.1.1.4 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated This object indicates the venue group with respect to 802.11u feature , for this WLAN.
| |||||||||||||||||||||
| CcLWlan11uVenueType | 1.3.6.1.4.1.9.9.512.1.3.1.1.5 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated This object indicates the venue type within
a particular venue group, with respect
to 802.11u feature , for this WLAN.
The Venue group-Venue Type relationship is per
the following table:
Venue Group Venue Type Code Venue Description
=========== =============== =================
0 0 Unspecified
0 1-255 Reserved
1 0 Unspecified Assembly
1 1 Arena
1 2 Stadium
1 3 Passenger Terminal (e.g.,
airport, port, bus station, ferry
terminal, train station)
1 4 Amphitheater
1 5 Amusement Park
1 6 Place of Worship
1 7 Convention Center
1 8 Library
1 9 Museum
1 10 Restaurant
1 11 Theater
1 12 Bar
1 13 Coffee Shop
1 14 Zoo or Aquarium
1 15 Emergency Coordination Center
1 16-255 Reserved
2 0 Unspecified Business
2 1 Doctor or Dentist office
2 2 Bank
2 3 Fire Station
2 4 Police Station
2 6 Post Office
2 7 Professional Office
2 8 Research and Development Facility
2 9 Attorney Office
2 10-255 Reserved
3 0 Unspecified Educational
3 1 School, Primary
3 2 School, Secondary
3 3 University or College
3 4-255 Reserved
4 0 Unspecified Factory and Industrial
4 1 Factory
4 2-255 Reserved
5 0 Unspecified Institutional
5 1 Hospital
5 2 Long-Term Care Facility (e.g.,
Nursing home, Hospice, etc.)
5 3 Alcohol and Drug Re-habilitation
Center
5 4 Group Home
5 5 Prison or Jail
5 6-255 Reserved
6 0 Unspecified Mercantile
6 1 Retail Store
6 2 Grocery Market
6 3 Automotive Service Station
6 4-255 Reserved
7 0 Unspecified Residential
7 1 Hotel or Motel
7 2 Dormitory
7 3 Boarding House
7 4-255 Reserved
8 0-255 Reserved
9 0-255 Reserved
10 0 Unspecified Vehicular
10 1 Automobile or Truck
10 2 Airplane
10 3 Bus
10 4 Ferry
10 5 Ship or Boat
10 6 Train
10 7-255 Reserved
11 0 Unspecified Outdoor
11 1 Muni-mesh Network
11 2 City Park
11 3-255 Reserved
| |||||||||||||||||||||
| CcLWlan11uVenueName | 1.3.6.1.4.1.9.9.512.1.3.1.1.6 | SnmpAdminString (SIZE (1..255)) | RW | deprecated | |||||||||||||||||
column · SnmpAdminString (SIZE (1..255)) · read-write · deprecated This is the venue name defined for this WLAN with respect to 802.11u feature. | |||||||||||||||||||||
| CcLWlan11uHessid | 1.3.6.1.4.1.9.9.512.1.3.1.1.8 | MacAddress | RW | ||||||||||||||||||
column · MacAddress · read-write · current This object is used to configure the Hessid for this WLAN. | |||||||||||||||||||||
| CcLWlan11uNetworkAuthType | 1.3.6.1.4.1.9.9.512.1.3.1.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object is used to configure the NetworkAuthType for a WLAN
| |||||||||||||||||||||
| CcLWlan11uIpAddressAvailIpv4 | 1.3.6.1.4.1.9.9.512.1.3.1.1.10 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object represents the IPv4 Address Availability.
| |||||||||||||||||||||
| CcLWlan11uIpAddressAvailIpv6 | 1.3.6.1.4.1.9.9.512.1.3.1.1.11 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object represents the IPv6 Address Availability.
| |||||||||||||||||||||
| TcLWlan11uOuiTable | 1.3.6.1.4.1.9.9.512.1.3.2 | NA | |||||||||||||||||||
table · not-accessible · current This table represents the OUI (organizational unique identifier) configuration for a particular WLAN. OUIs are assigned by IEEE. A WLAN can have up to 32 OUIs defined. OUI configuration per WLAN is required for the 802.11u feature to work. Rows are added or deleted by explicit management actions initiated by the user from a network management station through the cLWlan11uOuiRowStatus object. | |||||||||||||||||||||
| RcLWlan11uOuiEntry | 1.3.6.1.4.1.9.9.512.1.3.2.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry in this table represents the OUI (organizational unique identifier) configuration for a particular WLAN. OUIs are assigned by IEEE. A WLAN can have up to 32 OUIs defined. OUI configuration per WLAN is required for the 802.11u feature to work.
| |||||||||||||||||||||
| CcLWlan11uOuiIndex | 1.3.6.1.4.1.9.9.512.1.3.2.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current This object uniquely identifies one instance of a OUI on a WLAN.Each WLAN can have up to 32 OUIs defined. Each OUI should be unique. | |||||||||||||||||||||
| CcLWlan11uOui | 1.3.6.1.4.1.9.9.512.1.3.2.1.2 | OCTET STRING (SIZE (6 | 10)) | RC | ||||||||||||||||||
column · OCTET STRING (SIZE (6 | 10)) · read-create · current The OUI field is a public OUI assigned by the IEEE. Each OUI identifies a roaming consortium (group of SSPs with inter-SSP roaming agreement) or a single SSP.WLAN can have up to 32 OUIs defined. Each OUI defined for a WLAN should be unique. For example the value for Cisco is 004096. | |||||||||||||||||||||
| CcLWlan11uOuiIsBeacon | 1.3.6.1.4.1.9.9.512.1.3.2.1.3 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current This object is used to configure this particular OUI as one of the beacon OUIs. Beacon can carry at most 3 OUIs. User should be able to select 0-3 OUIs (from the already configured OUIs for this WLAN). A value of 'true' indicates that this OUI would be carried in beacon. A value of 'false' indicates that this OUI is not a beacon OUI. | |||||||||||||||||||||
| CcLWlan11uOuiRowStatus | 1.3.6.1.4.1.9.9.512.1.3.2.1.4 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row Status for creation/deletion of a particular OUI entry in the table. | |||||||||||||||||||||
| CcLWlan11uOuiStorageType | 1.3.6.1.4.1.9.9.512.1.3.2.1.5 | StorageType | RC | ||||||||||||||||||
column · StorageType · read-create · current This object represnts the storage type for this conceptual row. | |||||||||||||||||||||
| TcLWlan11uRealmTable | 1.3.6.1.4.1.9.9.512.1.3.3 | NA | |||||||||||||||||||
table · not-accessible · current This table represents the realm (NAI) details per WLAN. In order to provide roaming services, it is necessary to have a standardized method for identifying users. NAI is the user identity submitted by the client during network authentication. Each realm entry should be unique. | |||||||||||||||||||||
| RcLWlan11uRealmEntry | 1.3.6.1.4.1.9.9.512.1.3.3.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry in this table represents the realm (NAI) configuration for a particular WLAN.A WLAN can have up to 32 realm defined | |||||||||||||||||||||
| CcLWlan11uRealmIndex | 1.3.6.1.4.1.9.9.512.1.3.3.1.1 | Unsigned32 (1..128) | NA | ||||||||||||||||||
column · Unsigned32 (1..128) · not-accessible · current This object specifies, one instance of a realm EAP entry (NAI) on a WLAN. Each realm entry should be unique. | |||||||||||||||||||||
| CcLWlan11uRealmName | 1.3.6.1.4.1.9.9.512.1.3.3.1.2 | SnmpAdminString (SIZE (1..128)) | RC | ||||||||||||||||||
column · SnmpAdminString (SIZE (1..128)) · read-create · current This object represents the NAI name. In order to provide roaming services, it is necessary to have a standardized method for identifying users. NAI is the user identity submitted by the client during network authentication. In roaming, the purpose of the NAI is to identify the user as well as to assist in the routing of the authentication request. Please note that the NAI may not necessarily be the same as the user's e-mail address or the user identity submitted in an application layer authentication. | |||||||||||||||||||||
| CcLWlan11uRealmRowStatus | 1.3.6.1.4.1.9.9.512.1.3.3.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row Status for creation/deletion of a particular realm entry (NAI)from the table | |||||||||||||||||||||
| TcLWlan11uRealmEapTable | 1.3.6.1.4.1.9.9.512.1.3.4 | NA | |||||||||||||||||||
table · not-accessible · current This table represents the EAP method configured per realm for a particular WLAN. A realm can have up to 4 EAP method defined. The EAP method supported are LEAP,PEAP,EAP-FAST and EAP-TLS. | |||||||||||||||||||||
| RcLWlan11uRealmEapEntry | 1.3.6.1.4.1.9.9.512.1.3.4.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry in this table represents the EAP method configured per realm for a particular WLAN. A realm can have up to 4 EAP method defined. The EAP method supported are LEAP,PEAP,EAP-FAST and EAP-TLS. | |||||||||||||||||||||
| CcLWlan11uRealmEapIndex | 1.3.6.1.4.1.9.9.512.1.3.4.1.1 | Unsigned32 (1..4) | NA | ||||||||||||||||||
column · Unsigned32 (1..4) · not-accessible · current This object uniquely identifies one instance of a EAP entry configured per a realm for a particular WLAN. | |||||||||||||||||||||
| CcLWlan11uRealmEapMethod | 1.3.6.1.4.1.9.9.512.1.3.4.1.2 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current This object represents the EAP method defined.
| |||||||||||||||||||||
| CcLWlan11uRealmEapRowStatus | 1.3.6.1.4.1.9.9.512.1.3.4.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row Status for creation/deletion of a particular EAP entry from the table | |||||||||||||||||||||
| TcLWlan11uRealmEapAuthTable | 1.3.6.1.4.1.9.9.512.1.3.5 | NA | |||||||||||||||||||
table · not-accessible · current This table represents the authentication method details configured per EAP method for particular realm. There can be up to 10 authentication configuration entries per EAP method. | |||||||||||||||||||||
| RcLWlan11uRealmEapAuthEntry | 1.3.6.1.4.1.9.9.512.1.3.5.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry in this table represents the authentication method details configured per EAP method for particular realm. There can be up to 10 authentication configuration entries per EAP method. | |||||||||||||||||||||
| CcLWlan11uRealmEapAuthIndex | 1.3.6.1.4.1.9.9.512.1.3.5.1.1 | Unsigned32 (1..10) | NA | ||||||||||||||||||
column · Unsigned32 (1..10) · not-accessible · current This object uniquely identifies one instance of a auth entry configured per a EAP for a particular WLAN. | |||||||||||||||||||||
| CcLWlan11uRealmEapAuthMethod | 1.3.6.1.4.1.9.9.512.1.3.5.1.2 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current This object represents the authentication method defined.
| |||||||||||||||||||||
| CcLWlan11uRealmEapAuthParam | 1.3.6.1.4.1.9.9.512.1.3.5.1.3 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current This object represents the authentication parameter defined for a particular authentication method. The Autentication Parameter and the Authentication Method relationship as follows Method Parameter Description =========== =============== ================= 1 1 Reserved 1 2 PAP 1 3 CHAP 1 4 MSCHAP 1 5 MSCHAPV2 2 6 LEAP 2 7 PEAP 2 8 EAP-TLS 2 9 EAP-FAST 2 10 EAP-SIM 2 11 EAP-TTLS 2 12 EAP-AKA 3 13 SIM 3 14 USIM 3 15 NFCSECURE 3 16 HARDWARE TOKEN 3 17 SOFT TOKEN 3 18 CERTIFICATE 3 19 USERNAME PASSWORD 3 20 RESERVED 3 21 Anonynous 3 22 Vendor Specific
| |||||||||||||||||||||
| CcLWlan11uRealmEapAuthCredentialType | 1.3.6.1.4.1.9.9.512.1.3.5.1.4 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current This is the credential type defined for a particular authentication method.
| |||||||||||||||||||||
| CcLWlan11uRealmEapAuthRowStatus | 1.3.6.1.4.1.9.9.512.1.3.5.1.5 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row Status for creation/deletion of a particular auth entry from the table | |||||||||||||||||||||
| TcLWlan11uDomainTable | 1.3.6.1.4.1.9.9.512.1.3.6 | NA | |||||||||||||||||||
table · not-accessible · current This table represents the Domain Entry configuration for a particular WLAN in a controller. Rows are added or deleted by explicit management actions initiated by the user from a network management station through the cLWlan11uDomainRowStatus object | |||||||||||||||||||||
| RcLWlan11uDomainEntry | 1.3.6.1.4.1.9.9.512.1.3.6.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry in this table represents the Domain configuration for a particular WLAN. A WLAN can have up to 10 domains defined. | |||||||||||||||||||||
| CcLWlan11uDomainIndex | 1.3.6.1.4.1.9.9.512.1.3.6.1.1 | Unsigned32 (1..32) | NA | ||||||||||||||||||
column · Unsigned32 (1..32) · not-accessible · current This object uniquely identifies one instance of a Domain on a WLAN.Each WLAN can have up to 10 Domains defined. Each Domain should be unique. | |||||||||||||||||||||
| CcLWlan11uDomainName | 1.3.6.1.4.1.9.9.512.1.3.6.1.2 | SnmpAdminString (SIZE (1..255)) | RC | ||||||||||||||||||
column · SnmpAdminString (SIZE (1..255)) · read-create · current This object represents the domain name for this particular Index. | |||||||||||||||||||||
| CcLWlan11uDomainRowStatus | 1.3.6.1.4.1.9.9.512.1.3.6.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row Status for creation/deletion of a particular Domain entry in the table. | |||||||||||||||||||||
| TcLWlan11u3gppTable | 1.3.6.1.4.1.9.9.512.1.3.7 | NA | |||||||||||||||||||
table · not-accessible · current This table represents the 3gpp info configuration for a particular WLAN in a controller. Rows are added or deleted by explicit management actions initiated by the user from a network management station through the cLWlan11u3gppRowStatus object | |||||||||||||||||||||
| RcLWlan11u3gppEntry | 1.3.6.1.4.1.9.9.512.1.3.7.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry in this table represents the Domain configuration for a particular WLAN. A WLAN can have up to 32 operator defined. | |||||||||||||||||||||
| CcLWlan11u3gppIndex | 1.3.6.1.4.1.9.9.512.1.3.7.1.1 | Unsigned32 (1..32) | NA | ||||||||||||||||||
column · Unsigned32 (1..32) · not-accessible · current This object uniquely identifies one instance of a 3gpp on a WLAN.Each WLAN can have up to 32 3gpps defined. Each 3gpp should be unique. | |||||||||||||||||||||
| CcLWlan11u3gppCountryCode | 1.3.6.1.4.1.9.9.512.1.3.7.1.2 | OCTET STRING | RC | ||||||||||||||||||
column · OCTET STRING · read-create · current This is the Language defined for this 3gpp Index. | |||||||||||||||||||||
| CcLWlan11u3gppNetworkCode | 1.3.6.1.4.1.9.9.512.1.3.7.1.3 | OCTET STRING | RC | ||||||||||||||||||
column · OCTET STRING · read-create · current This is the Language defined for this 3gpp Index. | |||||||||||||||||||||
| CcLWlan11u3gppRowStatus | 1.3.6.1.4.1.9.9.512.1.3.7.1.4 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row Status for creation/deletion of a particular 3gpp entry in the table. | |||||||||||||||||||||
| NciscoLwappWlanServiceAdvertisementConfig | 1.3.6.1.4.1.9.9.512.1.4 | ||||||||||||||||||||
| TcLWlanServiceAdvertisementTable | 1.3.6.1.4.1.9.9.512.1.4.1 | NA | |||||||||||||||||||
table · not-accessible · current This table represents the generic service advertisement configuration for a particular WLAN in a controller. This table has a one-to-one relationship with cLWlanConfigTable. There exist a row in this table corresponding to each row representing a WLAN in cLWlanConfigTable. | |||||||||||||||||||||
| RcLWlanServiceAdvertisementEntry | 1.3.6.1.4.1.9.9.512.1.4.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry in this table represents the generic 802.11u configuration for a WLAN.
| |||||||||||||||||||||
| CcLWlanServiceAdvertisementStatus | 1.3.6.1.4.1.9.9.512.1.4.1.1.1 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current This object represents the MSAP status for this WLAN. A value of true enables MSAP for this WLAN. A value of false disbales MSAP for this WLAN. | |||||||||||||||||||||
| CcLWlanServiceAdvertisementMsapServerIndex | 1.3.6.1.4.1.9.9.512.1.4.1.1.5 | Unsigned32 (1..10) | RC | ||||||||||||||||||
column · Unsigned32 (1..10) · read-create · current This object represents the Index for the MSAP Server. | |||||||||||||||||||||
| NciscoLwappWlanHotSpot2Config | 1.3.6.1.4.1.9.9.512.1.5 | ||||||||||||||||||||
| TcLWlanHotSpot2OperatorTable | 1.3.6.1.4.1.9.9.512.1.5.1 | NA | |||||||||||||||||||
table · not-accessible · current This table represents the Operator configuration for a particular WLAN in a controller. Rows are added or deleted by explicit management actions initiated by the user from a network management station through the cLWlanHotSpot2OperatorRowStatus object | |||||||||||||||||||||
| RcLWlanHotSpot2OperatorEntry | 1.3.6.1.4.1.9.9.512.1.5.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry in this table represents the Domain configuration for a particular WLAN. A WLAN can have up to 32 operator defined. | |||||||||||||||||||||
| CcLWlanHotSpot2OperatorIndex | 1.3.6.1.4.1.9.9.512.1.5.1.1.1 | Unsigned32 (1..32) | NA | ||||||||||||||||||
column · Unsigned32 (1..32) · not-accessible · current This object uniquely identifies one instance of a Operator on a WLAN.Each WLAN can have up to 32 Operators defined. Each Operator should be unique. | |||||||||||||||||||||
| CcLWlanHotSpot2OperatorName | 1.3.6.1.4.1.9.9.512.1.5.1.1.2 | SnmpAdminString (SIZE (1..255)) | RC | ||||||||||||||||||
column · SnmpAdminString (SIZE (1..255)) · read-create · current This object represents the Operator name for this particular Index. | |||||||||||||||||||||
| CcLWlanHotSpot2OperatorLanguage | 1.3.6.1.4.1.9.9.512.1.5.1.1.3 | SnmpAdminString (SIZE (1..3)) | RC | ||||||||||||||||||
column · SnmpAdminString (SIZE (1..3)) · read-create · current This is the Language defined for this Operator Index. | |||||||||||||||||||||
| CcLWlanHotSpot2OperatorRowStatus | 1.3.6.1.4.1.9.9.512.1.5.1.1.4 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row Status for creation/deletion of a particular Operator entry in the table. | |||||||||||||||||||||
| TcLWlanHotSpot2PortConfigTable | 1.3.6.1.4.1.9.9.512.1.5.2 | NA | |||||||||||||||||||
table · not-accessible · current This object uniquely identifies one instance of Port-Protocol Configuration on a WLAN.Each WLAN can have up to 10 port configuration defined.Each configuration should be unique. | |||||||||||||||||||||
| RcLWlanHotSpot2PortConfigEntry | 1.3.6.1.4.1.9.9.512.1.5.2.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry in this table represents the Port-Protocol configuration for a particular WLAN. A WLAN can have up to 10 port configurations defined. | |||||||||||||||||||||
| CcLWlanHotSpot2PortConfigIndex | 1.3.6.1.4.1.9.9.512.1.5.2.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current This object uniquely identifies one instance of a Port Configuration on a WLAN.Each WLAN can have up to 32 Port Configurations defined.Each Port Configuration should be unique. | |||||||||||||||||||||
| CcLWlanHotSpot2PortConfigIpProtocol | 1.3.6.1.4.1.9.9.512.1.5.2.1.2 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current This object represents the Port Ip protocol for this index for a WLAN
| |||||||||||||||||||||
| CcLWlanHotSpot2PortConfigPortNumber | 1.3.6.1.4.1.9.9.512.1.5.2.1.3 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current This object represents the Port Number for this index for a WLAN. This object indicates the Port Number with respect to an IP Protocol. The Protocol Port Number relationship is per the following table: IP Protocol Port Number Description =========== =============== ================= 1 0 ICMP 6 20 FTP 6 22 SSH 6 443 TLS 6 1723 PPTP-VPN 6 5060 VoIP 17 5060 VoIP 17 4500 IKEv 17 500 IKEv2 50 0 ESP
| |||||||||||||||||||||
| CcLWlanHotSpot2PortConfigStatus | 1.3.6.1.4.1.9.9.512.1.5.2.1.4 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current This object represents the Port Status for this instance for a WLAN
| |||||||||||||||||||||
| CcLWlanHotSpot2PortConfigRowStatus | 1.3.6.1.4.1.9.9.512.1.5.2.1.5 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row Status for creation/deletion of a particular PortConfig entry in the table. | |||||||||||||||||||||
| TcLWlanHotSpot2ConfigTable | 1.3.6.1.4.1.9.9.512.1.5.3 | NA | |||||||||||||||||||
table · not-accessible · current This table represents the generic HotSpot2 configuration for a particular WLAN in a controller. This table has a one-to-one relationship with cLWlanConfigTable. There exist a row in this table corresponding to each row representing a WLAN in cLWlanConfigTable. | |||||||||||||||||||||
| RcLWlanHotSpot2ConfigEntry | 1.3.6.1.4.1.9.9.512.1.5.3.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry in this table represents the generic HotSpot2 configuration for a WLAN.
| |||||||||||||||||||||
| CcLWlanHotSpot2WanLinkStatus | 1.3.6.1.4.1.9.9.512.1.5.3.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object represents the status of the link with respect to WAN metrics configuration.
| |||||||||||||||||||||
| CcLWlanHotSpot2WanSymLinkStatus | 1.3.6.1.4.1.9.9.512.1.5.3.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object represents the symmetry of the link with respect to WAN metrics configuration. A value of 'different(1)' indicates that link speed is different in uplink and downlink(ex:ADSL). A value of 'same(2)' indicates that link speed is same in uplink and downlink(ex:DSL).
| |||||||||||||||||||||
| CcLWlanHotSpot2WanDownLinkSpeed | 1.3.6.1.4.1.9.9.512.1.5.3.1.3 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object represents the down link speed of WAN Backhaul in kbps. | |||||||||||||||||||||
| CcLWlanHotSpot2WanUpLinkSpeed | 1.3.6.1.4.1.9.9.512.1.5.3.1.4 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object represents the up link speed of WAN Backhaul in kbps. | |||||||||||||||||||||
| NciscoLwappAPGroupNasIdConfig | 1.3.6.1.4.1.9.9.512.1.6 | ||||||||||||||||||||
| TcLAPGroupNasIdConfigTable | 1.3.6.1.4.1.9.9.512.1.6.1 | NA | |||||||||||||||||||
table · not-accessible · current A table for the configuring NAS-ID for an AP group. | |||||||||||||||||||||
| RcLAPGroupNasIdConfigEntry | 1.3.6.1.4.1.9.9.512.1.6.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in cLAPGroupNasIdConfigTable for the configuring NAS-ID for an AP group.
| |||||||||||||||||||||
| CcLAPGroupNasId | 1.3.6.1.4.1.9.9.512.1.6.1.1.1 | SnmpAdminString | RW | ||||||||||||||||||
column · SnmpAdminString · read-write · current This object specifies the NAS-ID to this AP group NAS-ID string is sent to radius server by WLC (as radius client) via authentication request, which can be used to classify users to different groups then radius server can reply a customized authentication response | |||||||||||||||||||||
| NciscoLwappPolicyConfig | 1.3.6.1.4.1.9.9.512.1.7 | ||||||||||||||||||||
| TcLPolicyConfigTable | 1.3.6.1.4.1.9.9.512.1.7.1 | NA | |||||||||||||||||||
table · not-accessible · current A table for the native Profiling Policies on the Wireless LAN controller. Rows are added or deleted by explicit management actions initiated by the user from a network management station through the cLPolicyRowStatus object. | |||||||||||||||||||||
| RcLPolicyConfigEntry | 1.3.6.1.4.1.9.9.512.1.7.1.1 | NA | |||||||||||||||||||
| CcLPolicyIndex | 1.3.6.1.4.1.9.9.512.1.7.1.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current This object indicates the Index of the native profiling classification policy configured on the Wireless LAN Controller. | |||||||||||||||||||||
| CcLPolicyName | 1.3.6.1.4.1.9.9.512.1.7.1.1.2 | SnmpAdminString | RC | ||||||||||||||||||
column · SnmpAdminString · read-create · current This object specifies a native profiling classification policy configured on the Wireless LAN Controller. | |||||||||||||||||||||
| CcLPolicyRoleName | 1.3.6.1.4.1.9.9.512.1.7.1.1.3 | SnmpAdminString | RC | ||||||||||||||||||
column · SnmpAdminString · read-create · current This object specifies the category of users to which a Policy is to be applied. | |||||||||||||||||||||
| CcLPolicyEapType | 1.3.6.1.4.1.9.9.512.1.7.1.1.4 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current This object specifies the EAP type to be applied on client.
| |||||||||||||||||||||
| CcLPolicyAclName | 1.3.6.1.4.1.9.9.512.1.7.1.1.5 | SnmpAdminString | RC | ||||||||||||||||||
column · SnmpAdminString · read-create · current This object specifies the ACL to be applied on client. | |||||||||||||||||||||
| CcLPolicyVlanId | 1.3.6.1.4.1.9.9.512.1.7.1.1.6 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current This object specifies the VLAN to be applied on client. | |||||||||||||||||||||
| CcLPolicyQosProfile | 1.3.6.1.4.1.9.9.512.1.7.1.1.7 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current This object specifies the QoS to be applied on client.
| |||||||||||||||||||||
| CcLPolicySessionTimeout | 1.3.6.1.4.1.9.9.512.1.7.1.1.8 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current This object specifies the session timeout to be applied on client. | |||||||||||||||||||||
| CcLPolicySleepTimeout | 1.3.6.1.4.1.9.9.512.1.7.1.1.9 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current This object specifies the sleep timeout to be applied on client. | |||||||||||||||||||||
| CcLPolicyRowStatus | 1.3.6.1.4.1.9.9.512.1.7.1.1.10 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current This object specifies the Row Status for creation/deletion of a particular policy entry in the table. | |||||||||||||||||||||
| CcLPolicyFlexAclName | 1.3.6.1.4.1.9.9.512.1.7.1.1.11 | SnmpAdminString | RC | ||||||||||||||||||
column · SnmpAdminString · read-create · current This object specifies the FlexConnect ACL to be applied on client using a Policy. This will be effective only on locally switched WLANs. | |||||||||||||||||||||
| CcLPolicyAvcProfileName | 1.3.6.1.4.1.9.9.512.1.7.1.1.12 | SnmpAdminString | RC | ||||||||||||||||||
column · SnmpAdminString · read-create · current This object specifies the avc profilename to be applied on client. | |||||||||||||||||||||
| CcLPolicyMdnsProfileName | 1.3.6.1.4.1.9.9.512.1.7.1.1.13 | SnmpAdminString | RC | ||||||||||||||||||
column · SnmpAdminString · read-create · current This object specifies the MDNS profile name to be applied on client. | |||||||||||||||||||||
| CcLPolicyFlexVlanId | 1.3.6.1.4.1.9.9.512.1.7.1.1.14 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current This object specifies the flex VLAN to be applied on client . | |||||||||||||||||||||
| CcLPolicyUrlAclName | 1.3.6.1.4.1.9.9.512.1.7.1.1.15 | SnmpAdminString | RC | ||||||||||||||||||
column · SnmpAdminString · read-create · current This object specifies the URL ACL to be applied on client . | |||||||||||||||||||||
| CcLPolicyOpendnsProfileName | 1.3.6.1.4.1.9.9.512.1.7.1.1.16 | SnmpAdminString | RC | ||||||||||||||||||
column · SnmpAdminString · read-create · current This object specifies the opendns profile name to be applied on client . | |||||||||||||||||||||
| TcLPolicyDeviceTable | 1.3.6.1.4.1.9.9.512.1.7.2 | NA | |||||||||||||||||||
table · not-accessible · current A table for the device types to be added in each native Profiling Policy on the controller. Rows are added or deleted by explicit management actions initiated by the user from a network management station through the cLPolicyDeviceRowStatus object. | |||||||||||||||||||||
| RcLPolicyDeviceEntry | 1.3.6.1.4.1.9.9.512.1.7.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in cLPolicyConfigTable. | |||||||||||||||||||||
| CcLPolicyDeviceIndex | 1.3.6.1.4.1.9.9.512.1.7.2.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current This object indicates the index of the device type configured on the policy. | |||||||||||||||||||||
| CcLPolicyDeviceName | 1.3.6.1.4.1.9.9.512.1.7.2.1.2 | SnmpAdminString | RC | ||||||||||||||||||
column · SnmpAdminString · read-create · current This object specifies name of the device configured on the policy. | |||||||||||||||||||||
| CcLPolicyDeviceRowStatus | 1.3.6.1.4.1.9.9.512.1.7.2.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current This object specifies the Row Status for creation/deletion of a particular device entry in the table. | |||||||||||||||||||||
| TcLPolicyActiveHoursTable | 1.3.6.1.4.1.9.9.512.1.7.3 | NA | |||||||||||||||||||
table · not-accessible · current A table for the active hours to be added in each native Profiling Policy on the controller. Rows are added or deleted by explicit management actions initiated by the user from a network management station through the cLPolicyActiveHoursRowStatus object. | |||||||||||||||||||||
| RcLPolicyActiveHoursEntry | 1.3.6.1.4.1.9.9.512.1.7.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in cLPolicyActiveHoursTable. | |||||||||||||||||||||
| CcLPolicyActiveDay | 1.3.6.1.4.1.9.9.512.1.7.3.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current This object specifies the Index of the day for which active hours is configured on the policy.
| |||||||||||||||||||||
| CcLPolicyActiveStartTime | 1.3.6.1.4.1.9.9.512.1.7.3.1.2 | TimeTicks | RC | ||||||||||||||||||
column · TimeTicks · read-create · current This object specifies a start of active hours for a day added to a Policy. | |||||||||||||||||||||
| CcLPolicyActiveEndTime | 1.3.6.1.4.1.9.9.512.1.7.3.1.3 | TimeTicks | RC | ||||||||||||||||||
column · TimeTicks · read-create · current This object specifies a end of active hours for a day added to a Policy. | |||||||||||||||||||||
| CcLPolicyActiveHoursRowStatus | 1.3.6.1.4.1.9.9.512.1.7.3.1.4 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current This object specifies the Row Status for creation/deletion of a particular entry in the table. | |||||||||||||||||||||
| TcLPolicyWlanSchedulingTable | 1.3.6.1.4.1.9.9.512.1.7.4 | NA | |||||||||||||||||||
table · not-accessible · current This table represents the WLAN scheduling on the controller. Rows are added or deleted by explicit management actions initiated by the user from a network management station through the cLPolicyWlanSchedulingRowStatus object. | |||||||||||||||||||||
| RcLPolicyWlanSchedulingEntry | 1.3.6.1.4.1.9.9.512.1.7.4.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry in this table represents the configuration attributes of cLPolicyWlanSchedulingTable. | |||||||||||||||||||||
| CcLPolicyWlanSchedulingDay | 1.3.6.1.4.1.9.9.512.1.7.4.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current This object specifies the day for which WLAN scheduling is configured on the policy.
| |||||||||||||||||||||
| CcLPolicyWlanSchedulingStatus | 1.3.6.1.4.1.9.9.512.1.7.4.1.2 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current This object specifies scheduling status per WLAN. A value of 'true' indicates that scheduling status is enabled on a WLAN. A value of 'false' indicates that scheduling status is disabled on a WLAN. | |||||||||||||||||||||
| CcLPolicyWlanSchedulingStartTime | 1.3.6.1.4.1.9.9.512.1.7.4.1.3 | TimeTicks | RC | ||||||||||||||||||
column · TimeTicks · read-create · current This object specifies a start of WLAN scheduling hours for a day added to a Policy. | |||||||||||||||||||||
| CcLPolicyWlanSchedulingEndTime | 1.3.6.1.4.1.9.9.512.1.7.4.1.4 | TimeTicks | RC | ||||||||||||||||||
column · TimeTicks · read-create · current This object specifies a end of WLAN scheduling hours for a day added to a Policy. | |||||||||||||||||||||
| CcLPolicyWlanSchedulingRowStatus | 1.3.6.1.4.1.9.9.512.1.7.4.1.5 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current This is the status column for this row and is used to create and delete specific instances of rows in this table. | |||||||||||||||||||||
| NciscoLwappAPGroupsHyperlocationConfig | 1.3.6.1.4.1.9.9.512.1.8 | ||||||||||||||||||||
| TcLAPGroupsHyperlocationConfigTable | 1.3.6.1.4.1.9.9.512.1.8.1 | NA | |||||||||||||||||||
table · not-accessible · current A table for configuring Hyperlocation settings allowed for each AP Group. Each site can have a set of HALO and PakRSSI parameters associated with it. | |||||||||||||||||||||
| RcLAPGroupsHyperlocationConfigEntry | 1.3.6.1.4.1.9.9.512.1.8.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in cLAPGroupsHyperlocationConfigEntry. cLAPGroupName is mandatory for creating an entry in CLAPGroupsHyperlocationConfigEntry .
| |||||||||||||||||||||
| CcLAPGroupsHyperlocationEnable | 1.3.6.1.4.1.9.9.512.1.8.1.1.1 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object represents the state of Hyperlocation. A value of 'true' indicates that Hyperlocation is enabled. A value of 'false' indicates that Hyperlocation is disabled. | |||||||||||||||||||||
| CcLAPGroupsPakRssiThreshold | 1.3.6.1.4.1.9.9.512.1.8.1.1.2 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This object represents the threshold value for Packet RSSI location feature. Valid range is -100 dbm to -50 dbm. | |||||||||||||||||||||
| CcLAPGroupsPakRssiThresholdTrigger | 1.3.6.1.4.1.9.9.512.1.8.1.1.3 | Gauge32 (1..100) | RW | ||||||||||||||||||
column · Gauge32 (1..100) · read-write · current This object represents the trigger threshold value for Packet RSSI location feature. Valid range is 1 dbm to 100 dbm.
| |||||||||||||||||||||
| CcLAPGroupsPakRssiNtpIpAddressType | 1.3.6.1.4.1.9.9.512.1.8.1.1.4 | InetAddressType | RW | deprecated | |||||||||||||||||
column · InetAddressType · read-write · deprecated This object represents the NTP server IP address type for Packet RSSI location feature. | |||||||||||||||||||||
| CcLAPGroupsPakRssiNtpAddress | 1.3.6.1.4.1.9.9.512.1.8.1.1.5 | InetAddress | RW | deprecated | |||||||||||||||||
column · InetAddress · read-write · deprecated This object represents the NTP server IP address for Packet RSSI location feature. | |||||||||||||||||||||
| NciscoLwappAPGroupsPortConfig | 1.3.6.1.4.1.9.9.512.1.9 | ||||||||||||||||||||
| TcLAPGroupsPortConfigTable | 1.3.6.1.4.1.9.9.512.1.9.1 | NA | |||||||||||||||||||
table · not-accessible · current A table for configuring port settings allowed for each AP Group. | |||||||||||||||||||||
| RcLAPGroupsPortConfigEntry | 1.3.6.1.4.1.9.9.512.1.9.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in cLAPGroupsPortConfigEntry. cLAPGroupName is mandatory for creating a entry in CLAPGroupsPortConfigEntry . | |||||||||||||||||||||
| CcLAPGroupsLANPortNumber | 1.3.6.1.4.1.9.9.512.1.9.1.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current This object uniquely identifies the LAN port number of an AP Group. Each AP Group can have up to 3 LAN ports. | |||||||||||||||||||||
| CcLAPGroupsLANPortStatus | 1.3.6.1.4.1.9.9.512.1.9.1.1.2 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current This object represents the LAN port state. A value of 'true' indicates that selected LAN Port is enabled. A value of 'false' indicates that LAN Port is disabled.
| |||||||||||||||||||||
| CcLAPGroupsLANPortPoeStatus | 1.3.6.1.4.1.9.9.512.1.9.1.1.3 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current This object represents the LAN port POE state. A value of 'true' indicates that POE is enabled. A value of 'false' indicates that POE is disabled.
| |||||||||||||||||||||
| CcLAPGroupsLANPortRlanName | 1.3.6.1.4.1.9.9.512.1.9.1.1.4 | SnmpAdminString (SIZE (1..64)) | RC | ||||||||||||||||||
column · SnmpAdminString (SIZE (1..64)) · read-create · current This object represents the remote LAN name of the corresponding port. | |||||||||||||||||||||
| CcLAPGroupsLANPortRowStatus | 1.3.6.1.4.1.9.9.512.1.9.1.1.5 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current This is the status column for this row and used to create and delete specific instances of rows in this table. cLAPGroupName and cLAPGroupsLANPortNumber are mandatory for creating and deleting an entry. | |||||||||||||||||||||
| TcLAPGroupsExtModuleConfigTable | 1.3.6.1.4.1.9.9.512.1.9.2 | NA | |||||||||||||||||||
table · not-accessible · current A table for configuring external module settings allowed for each AP Group. An entry in this table is created for each AP group. | |||||||||||||||||||||
| RcLAPGroupsExtModuleConfigEntry | 1.3.6.1.4.1.9.9.512.1.9.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in cLAPGroupsExtModuleConfigEntry. cLAPGroupName is mandatory for creating an entry in CLAPGroupsExtModuleConfigEntry .
| |||||||||||||||||||||
| CcLAPGroupsExtModuleStatus | 1.3.6.1.4.1.9.9.512.1.9.2.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object represents the external module state. A value of 'true' indicates that external module is enabled. A value of 'false' indicates that external module is disabled.
| |||||||||||||||||||||
| CcLAPGroupsExtModuleRlanName | 1.3.6.1.4.1.9.9.512.1.9.2.1.2 | SnmpAdminString (SIZE (1..64)) | RW | ||||||||||||||||||
column · SnmpAdminString (SIZE (1..64)) · read-write · current This object represents the remote lan name of the external module. | |||||||||||||||||||||
| NciscoLwappAPGroupNtpConfig | 1.3.6.1.4.1.9.9.512.1.10 | ||||||||||||||||||||
| TcLwappAPGroupNtpConfigTable | 1.3.6.1.4.1.9.9.512.1.10.1 | NA | |||||||||||||||||||
table · not-accessible · current This table represents the NTP-server configuration for AP-Group. The creation of a new row in cLwappAPGroupNtpConfigTable, through an explicit network management action, results in creation of an entry in this table. Similarly, deletion of a row in cLwappAPGroupNtpConfigTable through user action causes the deletion of corresponding rows in this table. | |||||||||||||||||||||
| RcLAPGroupNtpConfigEntry | 1.3.6.1.4.1.9.9.512.1.10.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry in this table represents AP-Group NTP server info. A maximum of 32 entries can be added.
| |||||||||||||||||||||
| CcLAPGroupNtpIndex | 1.3.6.1.4.1.9.9.512.1.10.1.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current This object specifies the index value at which NTP server is to be created. | |||||||||||||||||||||
| CcLAPGroupNtpAddressType | 1.3.6.1.4.1.9.9.512.1.10.1.1.2 | InetAddressType | RC | ||||||||||||||||||
column · InetAddressType · read-create · current This object specifies the IP address type (IPv4 or IPv6) of the NTP Server | |||||||||||||||||||||
| CcLAPGroupNtpAddress | 1.3.6.1.4.1.9.9.512.1.10.1.1.3 | InetAddress | RC | ||||||||||||||||||
column · InetAddress · read-create · current This object specifies the IP address of the NTP Server | |||||||||||||||||||||
| CcLAPGroupNtpAuthKeyIndex | 1.3.6.1.4.1.9.9.512.1.10.1.1.4 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current This object specifies key-index for NTP server authentication. | |||||||||||||||||||||
| CcLAPGroupNtpAuthEnable | 1.3.6.1.4.1.9.9.512.1.10.1.1.5 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current This object specifies authentication for NTP server - A value of 'true' indicates authentication is enabled. - A value of 'false' indicates authentication is disabled. | |||||||||||||||||||||
| CcLAPGroupNtpRowStatus | 1.3.6.1.4.1.9.9.512.1.10.1.1.6 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current This object specifies row-status for creation/deletion of NTP server entry. | |||||||||||||||||||||
| TcLAPGroupNtpAuthKeyConfigTable | 1.3.6.1.4.1.9.9.512.1.10.2 | NA | |||||||||||||||||||
table · not-accessible · current The table represents configuration for authentication-key list to be used with AP-Group NTP server list. The creation of a new row in cLAPGroupNtpAuthKeyConfigTable, through an explicit network management action, results in creation of an entry in this table. Similarly, deletion of a row in cLAPGroupNtpAuthKeyConfigTable through user action causes the deletion of corresponding rows in this table. | |||||||||||||||||||||
| RcLAPGroupNtpAuthKeyConfigEntry | 1.3.6.1.4.1.9.9.512.1.10.2.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry in this table represents AP-Group NTP authentication key parameter. A total of 32 entries can be added. | |||||||||||||||||||||
| CcLAPGroupNtpAuthKeyListIndex | 1.3.6.1.4.1.9.9.512.1.10.2.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current This object specifies the index of the auth-key. | |||||||||||||||||||||
| CcLAPGroupNtpAuthKeyFormat | 1.3.6.1.4.1.9.9.512.1.10.2.1.2 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current This object specifies whether the auth-key is ascii or hex
| |||||||||||||||||||||
| CcLAPGroupNtpAuthKeyString | 1.3.6.1.4.1.9.9.512.1.10.2.1.3 | OCTET STRING | RC | ||||||||||||||||||
column · OCTET STRING · read-create · current This object specifies the value of auth-key string | |||||||||||||||||||||
| CcLAPGroupNtpAuthKeyType | 1.3.6.1.4.1.9.9.512.1.10.2.1.4 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current This object specifies whether the auth-key is md5 or sha1
| |||||||||||||||||||||
| CcLAPGroupNtpAuthKeyRowStatus | 1.3.6.1.4.1.9.9.512.1.10.2.1.5 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current This object specifies row-status for creation/deletion for AP-Group auth-key entry. | |||||||||||||||||||||
| TcLAPGroupNtpServerConfigTable | 1.3.6.1.4.1.9.9.512.1.10.3 | NA | |||||||||||||||||||
table · not-accessible · current This table represents configuration of NTP-server for each AP Group. | |||||||||||||||||||||
| RcLAPGroupNtpServerConfigEntry | 1.3.6.1.4.1.9.9.512.1.10.3.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry in this table represents NTP server used by AP-Group. | |||||||||||||||||||||
| CcLAPGroupNtpServerIndex | 1.3.6.1.4.1.9.9.512.1.10.3.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current This object specifies the NTP server index to be used for AP-Group. | |||||||||||||||||||||
| CcLAPGroupNtpServerAuthEnable | 1.3.6.1.4.1.9.9.512.1.10.3.1.2 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object specifies authentication for NTP for AP-Group - A value of 'true' indicates authentication is enabled. - A value of 'false' indicates authentication is disabled. | |||||||||||||||||||||
| CcLAPGroupNtpServerRowStatus | 1.3.6.1.4.1.9.9.512.1.10.3.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current This object specifies row-status for creation/deletion for NTP AP-Group entry. | |||||||||||||||||||||
| TcLAPGroupGlobalNtpServerConfigTable | 1.3.6.1.4.1.9.9.512.1.10.4 | NA | |||||||||||||||||||
table · not-accessible · current The table represents NTP-server configuration to be used as global AP Group. | |||||||||||||||||||||
| RcLAPGroupGlobalNtpServerConfigEntry | 1.3.6.1.4.1.9.9.512.1.10.4.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry in this table represents AP-Group NTP Server to be used for global configuration. | |||||||||||||||||||||
| CcLAPGroupGlobalNtpServerIndex | 1.3.6.1.4.1.9.9.512.1.10.4.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current This object specifies NTP server index to be mapped as global AP-Group NTP server. | |||||||||||||||||||||
| CcLAPGroupGlobalNtpServerAuth | 1.3.6.1.4.1.9.9.512.1.10.4.1.2 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current This object specifies authentication for global AP-Group NTP server - A value of 'true' indicates authentication is enabled. - A value of 'false' indicates authentication is disabled. | |||||||||||||||||||||
| CcLAPGroupGlobalNtpServerRowStatus | 1.3.6.1.4.1.9.9.512.1.10.4.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current This object specifies row-status for creation/deletion for global NTP AP-Group entry. | |||||||||||||||||||||
| NciscoLwappWlanMIBConform | 1.3.6.1.4.1.9.9.512.2 | ||||||||||||||||||||
| NciscoLwappWlanMIBCompliances | 1.3.6.1.4.1.9.9.512.2.1 | ||||||||||||||||||||
| MciscoLwappWlanMIBCompliance | 1.3.6.1.4.1.9.9.512.2.1.1 | deprecated | |||||||||||||||||||
compliance · deprecated The compliance statement for the SNMP entities that implement the ciscoLwappWlanMIB module.
| |||||||||||||||||||||
| MciscoLwappWlanMIBComplianceRev1 | 1.3.6.1.4.1.9.9.512.2.1.2 | deprecated | |||||||||||||||||||
compliance · deprecated The compliance statement for the SNMP entities that implement the ciscoLwappWlanMIB module. | |||||||||||||||||||||
| MciscoLwappWlanMIBComplianceRev2 | 1.3.6.1.4.1.9.9.512.2.1.3 | deprecated | |||||||||||||||||||
compliance · deprecated The compliance statement for the SNMP entities that implement the ciscoLwappWlanMIB module. | |||||||||||||||||||||
| MciscoLwappWlanMIBComplianceRev3 | 1.3.6.1.4.1.9.9.512.2.1.4 | deprecated | |||||||||||||||||||
compliance · deprecated The compliance statement for the SNMP entities that implement the ciscoLwappWlanMIB module. | |||||||||||||||||||||
| MciscoLwappWlanMIBComplianceRev4 | 1.3.6.1.4.1.9.9.512.2.1.5 | deprecated | |||||||||||||||||||
compliance · deprecated The compliance statement for the SNMP entities that implement the ciscoLwappWlanMIB module.
| |||||||||||||||||||||
| MciscoLwappWlanMIBComplianceRev5 | 1.3.6.1.4.1.9.9.512.2.1.6 | deprecated | |||||||||||||||||||
compliance · deprecated The compliance statement for the SNMP entities that implement the ciscoLwappWlanMIB module.
| |||||||||||||||||||||
| MciscoLwappWlanMIBComplianceRev6 | 1.3.6.1.4.1.9.9.512.2.1.7 | deprecated | |||||||||||||||||||
compliance · deprecated The compliance statement for the SNMP entities that implement the ciscoLwappWlanMIB module.
| |||||||||||||||||||||
| MciscoLwappWlanMIBComplianceRev7 | 1.3.6.1.4.1.9.9.512.2.1.8 | deprecated | |||||||||||||||||||
compliance · deprecated The compliance statement for the SNMP entities that implement the ciscoLwappWlanMIB module.
| |||||||||||||||||||||
| MciscoLwappWlanMIBComplianceRev8 | 1.3.6.1.4.1.9.9.512.2.1.9 | deprecated | |||||||||||||||||||
compliance · deprecated The compliance statement for the SNMP entities that implement the ciscoLwappWlanMIB module.
| |||||||||||||||||||||
| MciscoLwappWlanMIBComplianceRev9 | 1.3.6.1.4.1.9.9.512.2.1.10 | deprecated | |||||||||||||||||||
compliance · deprecated The compliance statement for the SNMP entities that implement the ciscoLwappWlanMIB module.
| |||||||||||||||||||||
| MciscoLwappWlanMIBComplianceRev10 | 1.3.6.1.4.1.9.9.512.2.1.11 | deprecated | |||||||||||||||||||
compliance · deprecated The compliance statement for the SNMP entities that implement the ciscoLwappWlanMIB module.
| |||||||||||||||||||||
| MciscoLwappWlanMIBComplianceRev11 | 1.3.6.1.4.1.9.9.512.2.1.12 | deprecated | |||||||||||||||||||
compliance · deprecated The compliance statement for the SNMP entities that implement the ciscoLwappWlanMIB module.
| |||||||||||||||||||||
| MciscoLwappWlanMIBComplianceRev12 | 1.3.6.1.4.1.9.9.512.2.1.13 | ||||||||||||||||||||
compliance · current The compliance statement for the SNMP entities that implement the ciscoLwappWlanMIB module.
| |||||||||||||||||||||
| NciscoLwappWlanMIBGroups | 1.3.6.1.4.1.9.9.512.2.2 | ||||||||||||||||||||
| GciscoLwappWlanConfigGroup | 1.3.6.1.4.1.9.9.512.2.2.1 | deprecated | |||||||||||||||||||
group · deprecated This collection of objects represent the configuration of WLANs on the controller to be passed to an LWAPP AP. ciscoLwappWlanConfigGroup object is superseded by ciscoLwappWlanConfigGroupSup1.
| |||||||||||||||||||||
| GciscoLwappWlanConfigGroupSup1 | 1.3.6.1.4.1.9.9.512.2.2.2 | ||||||||||||||||||||
group · current This collection of objects represent the configuration of WLANs on the controller to be passed to an LWAPP AP. | |||||||||||||||||||||
| GciscoLwappWlanConfigClientGroup | 1.3.6.1.4.1.9.9.512.2.2.3 | ||||||||||||||||||||
group · current This collection of objects represent the configuration of WLANs on the controller to be passed to an 8021.11 clients.
| |||||||||||||||||||||
| GciscoLwappWlan11uConfigGroup | 1.3.6.1.4.1.9.9.512.2.2.4 | deprecated | |||||||||||||||||||
group · deprecated This collection of objects represents 802.11u related configuration of WLANs on the controller to be passed to an AP. ciscoLwappWlan11uConfigGroup object is superseded by ciscoLwappWlan11uConfigGroupsup1. | |||||||||||||||||||||
| GciscoLwappAPGroupsVlanConfigGroup | 1.3.6.1.4.1.9.9.512.2.2.5 | deprecated | |||||||||||||||||||
group · deprecated This collection of objects represent the configuration of AP Groups Vlan on the controller to be passed to an AP. ciscoLwappAPGroupsVlanConfigGroup object is superseded by ciscoLwappAPGroupsVlanConfigGroupSup2. | |||||||||||||||||||||
| GciscoLwappWlanConfigGroupSup2 | 1.3.6.1.4.1.9.9.512.2.2.6 | ||||||||||||||||||||
group · current This collection of objects represent the configuration of WLANs on the controller to be passed to an LWAPP AP. | |||||||||||||||||||||
| GciscoLwappWlanConfigClientGroupSup1 | 1.3.6.1.4.1.9.9.512.2.2.7 | ||||||||||||||||||||
group · current This collection of objects represent the configuration of WLANs on the controller to be passed to an 8021.11 clients.
| |||||||||||||||||||||
| GciscoLwappWlanConfigGroupSup3 | 1.3.6.1.4.1.9.9.512.2.2.8 | ||||||||||||||||||||
group · current This collection of objects represent the configuration of WLANs on the controller to be passed to an LWAPP AP.
| |||||||||||||||||||||
| GciscoLwappWlan11uConfigGroupsup1 | 1.3.6.1.4.1.9.9.512.2.2.9 | ||||||||||||||||||||
group · current This collection of objects represents 802.11u related configuration of WLANs on the controller to be passed to an AP.
| |||||||||||||||||||||
| GciscoLwappWlanServiceAdvertisementConfigGroup | 1.3.6.1.4.1.9.9.512.2.2.10 | ||||||||||||||||||||
group · current This collection of objects represents 802.11u related configuration of WLANs on the controller to be passed to an AP. | |||||||||||||||||||||
| GciscoLwappWlanHotSpot2ConfigGroup | 1.3.6.1.4.1.9.9.512.2.2.11 | ||||||||||||||||||||
group · current This collection of objects represents 802.11u related configuration of WLANs on the controller to be passed to an AP. | |||||||||||||||||||||
| GciscoLwappWlanIosConfigGroup | 1.3.6.1.4.1.9.9.512.2.2.12 | ||||||||||||||||||||
group · current This collection of objects represents IOS related configuration of WLANs on the controller to be passed to an AP.
| |||||||||||||||||||||
| GciscoLwappWlanQosConfigGroup | 1.3.6.1.4.1.9.9.512.2.2.13 | ||||||||||||||||||||
group · current This collection of objects represents QoS related configuration of WLANs on the controller to be passed to an AP.
| |||||||||||||||||||||
| GciscoLwappWlanConfigGroupSup4 | 1.3.6.1.4.1.9.9.512.2.2.14 | deprecated | |||||||||||||||||||
group · deprecated This collection of objects represent the configuration of WLANs on the controller to be passed to an LWAPP AP.This object is superceded by ciscoLwappWlanConfigGroupSup5. ciscoLwappWlanConfigGroupSup4 object is superseded by ciscoLwappWlanConfigGroupSup5.
| |||||||||||||||||||||
| GciscoLwappWlan11uConfigGroupsup2 | 1.3.6.1.4.1.9.9.512.2.2.15 | ||||||||||||||||||||
group · current This collection of objects represents 802.11u related configuration of WLANs on the controller to be passed to an AP. | |||||||||||||||||||||
| GciscoLwappWlanHotSpot2ConfigGroupSup1 | 1.3.6.1.4.1.9.9.512.2.2.16 | ||||||||||||||||||||
group · current This collection of objects represents 802.11u related configuration of WLANs on the controller to be passed to an AP. | |||||||||||||||||||||
| GciscoLwappAPGroupsVlanConfigGroupSup1 | 1.3.6.1.4.1.9.9.512.2.2.17 | ||||||||||||||||||||
group · current This collection of objects represent the configuration of AP Groups Vlan on the controller to be passed to an AP.
| |||||||||||||||||||||
| GcLAPGroupsVenueConfigGroup | 1.3.6.1.4.1.9.9.512.2.2.18 | ||||||||||||||||||||
group · current This collection of objects represent the configuration of Venue groups on the controller to be passed to an AP. | |||||||||||||||||||||
| GcLAPGroupsMultipleVenueGroup | 1.3.6.1.4.1.9.9.512.2.2.19 | ||||||||||||||||||||
group · current This collection of objects represent the configuration of Venue groups on the controller to be passed to an AP. | |||||||||||||||||||||
| GciscoLwappWlanConfigClientGroupSup2 | 1.3.6.1.4.1.9.9.512.2.2.20 | ||||||||||||||||||||
group · current This collection of objects represent the configuration of WLANs on the controller to be passed to an 8021.11 clients.
| |||||||||||||||||||||
| GciscoLwappWlanConfigFlexibleNetflowGroup | 1.3.6.1.4.1.9.9.512.2.2.21 | ||||||||||||||||||||
group · current This collection of objects represent the configuration of flexible netflow policy details per WLAN on the conroller to be passed to an AP. | |||||||||||||||||||||
| GciscoLwappWlanConfigGroupSup5 | 1.3.6.1.4.1.9.9.512.2.2.22 | ||||||||||||||||||||
group · current This collection of objects represent the configuration of WLANs on the controller to be passed to an LWAPP AP.
| |||||||||||||||||||||
| GciscoLwappAPGroupsVlanConfigGroupSup2 | 1.3.6.1.4.1.9.9.512.2.2.23 | ||||||||||||||||||||
group · current This collection of objects represent the configuration of AP Groups Vlan on the controller to be passed to an AP. | |||||||||||||||||||||
| GciscoLwappWlanConfigGroupSup6 | 1.3.6.1.4.1.9.9.512.2.2.24 | ||||||||||||||||||||
group · current This collection of objects represent the configuration of WLANs on the controller to be passed to an LWAPP AP.
| |||||||||||||||||||||
| GciscoLwappWlanConfigGroupSup7 | 1.3.6.1.4.1.9.9.512.2.2.25 | ||||||||||||||||||||
group · current This collection of objects represent the configuration of AP Groups HyperLocation on the controller to be passed to an LWAPP AP. | |||||||||||||||||||||
| GciscoLwappWlanConfigGroupSup8 | 1.3.6.1.4.1.9.9.512.2.2.26 | ||||||||||||||||||||
group · current This collection of objects represent the configuration of AP Groups LAN Port on the controller to be passed to an LWAPP AP. | |||||||||||||||||||||
| GciscoLwappWlan11vConfigGroup | 1.3.6.1.4.1.9.9.512.2.2.27 | ||||||||||||||||||||
group · current This collection of objects represents 802.11v BSS Transistion related configuration of WLANs on the controller to be passed to an AP. | |||||||||||||||||||||
| GciscoLwappApGroupConfigGroup | 1.3.6.1.4.1.9.9.512.2.2.28 | ||||||||||||||||||||
group · current This collection of objects represents AP group related configuration of WLANs on the controller. | |||||||||||||||||||||
| GciscoLwappPolicyConfigGroup | 1.3.6.1.4.1.9.9.512.2.2.29 | ||||||||||||||||||||
group · current This collection of objects represents Policy related configuration of WLANs on the controller.
| |||||||||||||||||||||
| GciscoLwappWlan11kConfigGroup | 1.3.6.1.4.1.9.9.512.2.2.30 | ||||||||||||||||||||
group · current This collection of objects represent the configuration of AP Groups 11k on the controller to be passed to an LWAPP AP. | |||||||||||||||||||||
| GciscoLwappWlan11axConfigGroup | 1.3.6.1.4.1.9.9.512.2.2.31 | ||||||||||||||||||||
group · current This collection of objects represents 802.11ax related configuration of WLANs on the controller to be passed to an AP. | |||||||||||||||||||||
| GciscoLwappApGroupNtpServerGroup | 1.3.6.1.4.1.9.9.512.2.2.32 | ||||||||||||||||||||
group · current This collection of objects represents NTP related configuration for AP-Group on the controller.
| |||||||||||||||||||||
Groups and compliance
- cLAPGroupsMultipleVenueGroup
- cLAPGroupsVenueConfigGroup
- ciscoLwappAPGroupsVlanConfigGroup
- ciscoLwappAPGroupsVlanConfigGroupSup1
- ciscoLwappAPGroupsVlanConfigGroupSup2
- ciscoLwappApGroupConfigGroup
- ciscoLwappApGroupNtpServerGroup
- ciscoLwappPolicyConfigGroup
- ciscoLwappWlan11axConfigGroup
- ciscoLwappWlan11kConfigGroup
- ciscoLwappWlan11uConfigGroup
- ciscoLwappWlan11uConfigGroupsup1
- ciscoLwappWlan11uConfigGroupsup2
- ciscoLwappWlan11vConfigGroup
- ciscoLwappWlanConfigClientGroup
- ciscoLwappWlanConfigClientGroupSup1
- ciscoLwappWlanConfigClientGroupSup2
- ciscoLwappWlanConfigFlexibleNetflowGroup
- ciscoLwappWlanConfigGroup
- ciscoLwappWlanConfigGroupSup1
- ciscoLwappWlanConfigGroupSup2
- ciscoLwappWlanConfigGroupSup3
- ciscoLwappWlanConfigGroupSup4
- ciscoLwappWlanConfigGroupSup5
- ciscoLwappWlanConfigGroupSup6
- ciscoLwappWlanConfigGroupSup7
- ciscoLwappWlanConfigGroupSup8
- ciscoLwappWlanHotSpot2ConfigGroup
- ciscoLwappWlanHotSpot2ConfigGroupSup1
- ciscoLwappWlanIosConfigGroup
- ciscoLwappWlanMIBCompliance
- ciscoLwappWlanMIBComplianceRev1
- ciscoLwappWlanMIBComplianceRev10
- ciscoLwappWlanMIBComplianceRev11
- ciscoLwappWlanMIBComplianceRev12
- ciscoLwappWlanMIBComplianceRev2
- ciscoLwappWlanMIBComplianceRev3
- ciscoLwappWlanMIBComplianceRev4
- ciscoLwappWlanMIBComplianceRev5
- ciscoLwappWlanMIBComplianceRev6
- ciscoLwappWlanMIBComplianceRev7
- ciscoLwappWlanMIBComplianceRev8
- ciscoLwappWlanMIBComplianceRev9
- ciscoLwappWlanQosConfigGroup
- ciscoLwappWlanServiceAdvertisementConfigGroup