CISCO-L2L3-INTERFACE-CONFIG-MIB
ciscoSystemsInterface switchport mode configuration management MIB. This MIB is used to monitor and control configuration of interface switchport and routed mode.
snmptranslate -m CISCO-L2L3-INTERFACE-CONFIG-MIB -Tpsnmpwalk -v2c -c <community> -m CISCO-L2L3-INTERFACE-CONFIG-MIB <host> 1.3.6.1.4.1.9.9.151Imports
| CISCO-SMI | ciscoMgmt |
|---|---|
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IciscoL2L3IfConfigMIB | 1.3.6.1.4.1.9.9.151 | |||
identity Interface switchport mode configuration management MIB. This MIB is used to monitor and control configuration of interface switchport and routed mode. | ||||
| NciscoL2L3IfConfigMIBObjects | 1.3.6.1.4.1.9.9.151.1 | |||
| NcL2L3IfConfig | 1.3.6.1.4.1.9.9.151.1.1 | |||
| TcL2L3IfTable | 1.3.6.1.4.1.9.9.151.1.1.1 | NA | ||
table · not-accessible · current The table shows the administratively requested and actual operating configuration for switchport interfaces. | ||||
| RcL2L3IfEntry | 1.3.6.1.4.1.9.9.151.1.1.1.1 | NA | ||
row · not-accessible · current An entry represents the configuration and operation of a switchport interface. Entries are created and deleted automatically in tandem with the corresponding ifEntries.
| ||||
| CcL2L3IfModeAdmin | 1.3.6.1.4.1.9.9.151.1.1.1.1.1 | CL2L3InterfaceMode | RW | |
column · CL2L3InterfaceMode · read-write · current The administratively desired interface mode. | ||||
| CcL2L3IfModeOper | 1.3.6.1.4.1.9.9.151.1.1.1.1.2 | CL2L3InterfaceMode | RO | |
column · CL2L3InterfaceMode · read-only · current The operational interface mode. | ||||
| NciscoL2L3IfConfigMIBConformance | 1.3.6.1.4.1.9.9.151.3 | |||
| NciscoL2L3IfConfigMIBCompliances | 1.3.6.1.4.1.9.9.151.3.1 | |||
| MciscoL2L3IfConfigMIBCompliance | 1.3.6.1.4.1.9.9.151.3.1.1 | |||
compliance · current The compliance statement for entities which implement the Cisco L2L3 Interface Configuration Management MIB
| ||||
| NciscoL2L3IfConfigMIBGroups | 1.3.6.1.4.1.9.9.151.3.2 | |||
| GciscoL2L3IfConfigMIBGroup | 1.3.6.1.4.1.9.9.151.3.2.1 | |||
Textual conventions
CL2L3InterfaceModeINTEGERrouted(1)switchport(2)The operational mode of the interface. For administrative and operational states, valid values are: routed(1), switchport(2). routed(1): Routed mode interfaces direct traffic using layer 3 protocols. switchport(2): Switchport-mode interfaces direct traffic using layer 2 protocols. A switchport-mode interface can be in access mode, or trunk mode, or multi-mode. Switchport interface operating mode can be configured manually, or negotiated by Dynamic Trunking Protocol (DTP) or Dynamic Inter-Switch Link (DISL). Access-mode interfaces carry one VLAN's traffic. Access-mode interface parameters are configured in CISCO-VLAN-MEMBERSHIP-MIB. Trunk-mode interfaces carry one or more VLANs. VLAN-related trunk-mode interface parameters are configured in CISCO-VTP-MIB. Multi-mode interfaces carry one VLAN to each alias of a single connected end-station. VLAN-related multi-mode interface parameters are configured in CISCO-VTP-MIB.