CISCO-IPSEC-FLOW-MONITOR-MIB
ciscoSystemsThis is a MIB Module for monitoring the
structures in IPSec-based Virtual Private Networks.
The MIB has been designed to be adopted as an IETF
standard. Hence Cisco-specific features of IPSec
protocol are excluded from this MIB.
Acronyms
The following acronyms are used in this document:
IPSec: Secure IP Protocol
VPN: Virtual Private Network
ISAKMP: Internet Security Association and Key Exchange
Protocol
IKE: Internet Key Exchange Protocol
SA: Security Association
MM: Main Mode - the process of setting up
a Phase 1 SA to secure the exchanges
required to setup Phase 2 SAs
QM: Quick Mode - the process of setting up
Phase 2 Security Associations using
a Phase 1 SA.
Overview of IPsec MIB
The MIB contains six major groups of objects which are
used to manage the IPSec Protocol. These groups include
a Levels Group, a Phase-1 Group, a Phase-2 Group,
a History Group, a Failure Group and a TRAP Control Group.
The following table illustrates the structure of the
IPSec MIB.
The Phase 1 group models objects pertaining to
IKE negotiations and tunnels.
The Phase 2 group models objects pertaining to
IPSec data tunnels.
The History group is to aid applications that do
trending analysis.
The Failure group is to enable an operator to
do troubleshooting and debugging of the VPN Router.
Further, counters are supported to aid Intrusion
Detection.
In addition to the five major MIB Groups, there are
a number of Notifications. The following table
illustrates the name and description of the
IPSec TRAPs.
For a detailed discussion, please refer to the IETF
draft draft-ietf-ipsec-flow-monitoring-mib-00.txt.snmptranslate -m CISCO-IPSEC-FLOW-MONITOR-MIB -Tpsnmpwalk -v2c -c <community> -m CISCO-IPSEC-FLOW-MONITOR-MIB <host> 1.3.6.1.4.1.9.9.171Imports
| CISCO-MEDIA-GATEWAY-MIB | cmgwIndex |
|---|---|
| CISCO-SMI | ciscoMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TimeInterval, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IciscoIpSecFlowMonitorMIB | 1.3.6.1.4.1.9.9.171 | ||||||||||||
identity This is a MIB Module for monitoring the
structures in IPSec-based Virtual Private Networks.
The MIB has been designed to be adopted as an IETF
standard. Hence Cisco-specific features of IPSec
protocol are excluded from this MIB.
Acronyms
The following acronyms are used in this document:
IPSec: Secure IP Protocol
VPN: Virtual Private Network
ISAKMP: Internet Security Association and Key Exchange
Protocol
IKE: Internet Key Exchange Protocol
SA: Security Association
MM: Main Mode - the process of setting up
a Phase 1 SA to secure the exchanges
required to setup Phase 2 SAs
QM: Quick Mode - the process of setting up
Phase 2 Security Associations using
a Phase 1 SA.
Overview of IPsec MIB
The MIB contains six major groups of objects which are
used to manage the IPSec Protocol. These groups include
a Levels Group, a Phase-1 Group, a Phase-2 Group,
a History Group, a Failure Group and a TRAP Control Group.
The following table illustrates the structure of the
IPSec MIB.
The Phase 1 group models objects pertaining to
IKE negotiations and tunnels.
The Phase 2 group models objects pertaining to
IPSec data tunnels.
The History group is to aid applications that do
trending analysis.
The Failure group is to enable an operator to
do troubleshooting and debugging of the VPN Router.
Further, counters are supported to aid Intrusion
Detection.
In addition to the five major MIB Groups, there are
a number of Notifications. The following table
illustrates the name and description of the
IPSec TRAPs.
For a detailed discussion, please refer to the IETF
draft draft-ietf-ipsec-flow-monitoring-mib-00.txt. | |||||||||||||
| NcipSecMIBObjects | 1.3.6.1.4.1.9.9.171.1 | ||||||||||||
| NcipSecLevels | 1.3.6.1.4.1.9.9.171.1.1 | ||||||||||||
| ScipSecMibLevel | 1.3.6.1.4.1.9.9.171.1.1.1 | Integer32 (1..4096) | RO | 1 | |||||||||
scalar · Integer32 (1..4096) · read-only · current The level of the IPsec MIB. Example values from LibreNMS test devices
| |||||||||||||
| NcipSecPhaseOne | 1.3.6.1.4.1.9.9.171.1.2 | ||||||||||||
| NcikeGlobalStats | 1.3.6.1.4.1.9.9.171.1.2.1 | ||||||||||||
| ScikeGlobalActiveTunnels | 1.3.6.1.4.1.9.9.171.1.2.1.1 | Gauge32 | RO | 0 | |||||||||
scalar · Gauge32 · read-only · current The number of currently active IPsec Phase-1 IKE Tunnels. Example values from LibreNMS test devices
| |||||||||||||
| ScikeGlobalPreviousTunnels | 1.3.6.1.4.1.9.9.171.1.2.1.2 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of previously active IPsec Phase-1 IKE Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScikeGlobalInOctets | 1.3.6.1.4.1.9.9.171.1.2.1.3 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of octets received by all currently and previously active IPsec Phase-1 IKE Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScikeGlobalInPkts | 1.3.6.1.4.1.9.9.171.1.2.1.4 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of packets received by all currently and previously active IPsec Phase-1 IKE Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScikeGlobalInDropPkts | 1.3.6.1.4.1.9.9.171.1.2.1.5 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of packets which were dropped during receive processing by all currently and previously active IPsec Phase-1 IKE Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScikeGlobalInNotifys | 1.3.6.1.4.1.9.9.171.1.2.1.6 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of notifys received by all currently and previously active IPsec Phase-1 IKE Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScikeGlobalInP2Exchgs | 1.3.6.1.4.1.9.9.171.1.2.1.7 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of IPsec Phase-2 exchanges received by all currently and previously active IPsec Phase-1 IKE Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScikeGlobalInP2ExchgInvalids | 1.3.6.1.4.1.9.9.171.1.2.1.8 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of IPsec Phase-2 exchanges which were received and found to be invalid by all currently and previously active IPsec Phase-1 IKE Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScikeGlobalInP2ExchgRejects | 1.3.6.1.4.1.9.9.171.1.2.1.9 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of IPsec Phase-2 exchanges which were received and rejected by all currently and previously active IPsec Phase-1 IKE Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScikeGlobalInP2SaDelRequests | 1.3.6.1.4.1.9.9.171.1.2.1.10 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of IPsec Phase-2 security association delete requests received by all currently and previously active and IPsec Phase-1 IKE Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScikeGlobalOutOctets | 1.3.6.1.4.1.9.9.171.1.2.1.11 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of octets sent by all currently and previously active and IPsec Phase-1 IKE Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScikeGlobalOutPkts | 1.3.6.1.4.1.9.9.171.1.2.1.12 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of packets sent by all currently and previously active and IPsec Phase-1 Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScikeGlobalOutDropPkts | 1.3.6.1.4.1.9.9.171.1.2.1.13 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of packets which were dropped during send processing by all currently and previously active IPsec Phase-1 IKE Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScikeGlobalOutNotifys | 1.3.6.1.4.1.9.9.171.1.2.1.14 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of notifys sent by all currently and previously active IPsec Phase-1 IKE Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScikeGlobalOutP2Exchgs | 1.3.6.1.4.1.9.9.171.1.2.1.15 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of IPsec Phase-2 exchanges which were sent by all currently and previously active IPsec Phase-1 IKE Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScikeGlobalOutP2ExchgInvalids | 1.3.6.1.4.1.9.9.171.1.2.1.16 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of IPsec Phase-2 exchanges which were sent and found to be invalid by all currently and previously active IPsec Phase-1 Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScikeGlobalOutP2ExchgRejects | 1.3.6.1.4.1.9.9.171.1.2.1.17 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of IPsec Phase-2 exchanges which were sent and rejected by all currently and previously active IPsec Phase-1 IKE Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScikeGlobalOutP2SaDelRequests | 1.3.6.1.4.1.9.9.171.1.2.1.18 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of IPsec Phase-2 SA delete requests sent by all currently and previously active IPsec Phase-1 IKE Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScikeGlobalInitTunnels | 1.3.6.1.4.1.9.9.171.1.2.1.19 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of IPsec Phase-1 IKE Tunnels which were locally initiated.
Example values from LibreNMS test devices
| |||||||||||||
| ScikeGlobalInitTunnelFails | 1.3.6.1.4.1.9.9.171.1.2.1.20 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of IPsec Phase-1 IKE Tunnels which were locally initiated and failed to activate.
Example values from LibreNMS test devices
| |||||||||||||
| ScikeGlobalRespTunnelFails | 1.3.6.1.4.1.9.9.171.1.2.1.21 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of IPsec Phase-1 IKE Tunnels which were remotely initiated and failed to activate.
Example values from LibreNMS test devices
| |||||||||||||
| ScikeGlobalSysCapFails | 1.3.6.1.4.1.9.9.171.1.2.1.22 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of system capacity failures which occurred during processing of all current and previously active IPsec Phase-1 IKE Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScikeGlobalAuthFails | 1.3.6.1.4.1.9.9.171.1.2.1.23 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of authentications which ended in failure by all current and previous IPsec Phase-1 IKE Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScikeGlobalDecryptFails | 1.3.6.1.4.1.9.9.171.1.2.1.24 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of decryptions which ended in failure by all current and previous IPsec Phase-1 IKE Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScikeGlobalHashValidFails | 1.3.6.1.4.1.9.9.171.1.2.1.25 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of hash validations which ended in failure by all current and previous IPsec Phase-1 IKE Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScikeGlobalNoSaFails | 1.3.6.1.4.1.9.9.171.1.2.1.26 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of non-existent Security Association in failures which occurred during processing of all current and previous IPsec Phase-1 IKE Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| TcikePeerTable | 1.3.6.1.4.1.9.9.171.1.2.2 | NA | |||||||||||
table · not-accessible · current The IPsec Phase-1 Internet Key Exchange Peer Table. There is one entry in this table for each IPsec Phase-1 IKE peer association which is currently associated with an active IPsec Phase-1 Tunnel. The IPsec Phase-1 IKE Tunnel associated with this IPsec Phase-1 IKE peer association may or may not be currently active. | |||||||||||||
| RcikePeerEntry | 1.3.6.1.4.1.9.9.171.1.2.2.1 | NA | |||||||||||
row · not-accessible · current Each entry contains the attributes associated with an IPsec Phase-1 IKE peer association. | |||||||||||||
| CcikePeerLocalType | 1.3.6.1.4.1.9.9.171.1.2.2.1.1 | IkePeerType | NA | ||||||||||
column · IkePeerType · not-accessible · current The type of local peer identity. The local peer may be identified by: 1. an IP address, or 2. a host name. | |||||||||||||
| CcikePeerLocalValue | 1.3.6.1.4.1.9.9.171.1.2.2.1.2 | DisplayString | NA | ||||||||||
column · DisplayString · not-accessible · current The value of the local peer identity. If the local peer type is an IP Address, then this is the IP Address used to identify the local peer. If the local peer type is a host name, then this is the host name used to identify the local peer. | |||||||||||||
| CcikePeerRemoteType | 1.3.6.1.4.1.9.9.171.1.2.2.1.3 | IkePeerType | NA | ||||||||||
column · IkePeerType · not-accessible · current The type of remote peer identity. The remote peer may be identified by: 1. an IP address, or 2. a host name. | |||||||||||||
| CcikePeerRemoteValue | 1.3.6.1.4.1.9.9.171.1.2.2.1.4 | DisplayString | NA | ||||||||||
column · DisplayString · not-accessible · current The value of the remote peer identity. If the remote peer type is an IP Address, then this is the IP Address used to identify the remote peer. If the remote peer type is a host name, then this is the host name used to identify the remote peer. | |||||||||||||
| CcikePeerIntIndex | 1.3.6.1.4.1.9.9.171.1.2.2.1.5 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The internal index of the local-remote peer association. This internal index is used to uniquely identify multiple associations between the local and remote peer. | |||||||||||||
| CcikePeerLocalAddr | 1.3.6.1.4.1.9.9.171.1.2.2.1.6 | IPSIpAddress | RO | ||||||||||
column · IPSIpAddress · read-only · current The IP address of the local peer. | |||||||||||||
| CcikePeerRemoteAddr | 1.3.6.1.4.1.9.9.171.1.2.2.1.7 | IPSIpAddress | RO | ||||||||||
column · IPSIpAddress · read-only · current The IP address of the remote peer. | |||||||||||||
| CcikePeerActiveTime | 1.3.6.1.4.1.9.9.171.1.2.2.1.8 | TimeInterval | RO | ||||||||||
column · TimeInterval · read-only · current The length of time that the peer association has existed in hundredths of a second. | |||||||||||||
| CcikePeerActiveTunnelIndex | 1.3.6.1.4.1.9.9.171.1.2.2.1.9 | Integer32 (1..2147483647) | RO | ||||||||||
column · Integer32 (1..2147483647) · read-only · current The index of the active IPsec Phase-1 IKE Tunnel (cikeTunIndex in the cikeTunnelTable) for this peer association. If an IPsec Phase-1 IKE Tunnel is not currently active, then the value of this object will be zero. | |||||||||||||
| TcikeTunnelTable | 1.3.6.1.4.1.9.9.171.1.2.3 | NA | |||||||||||
table · not-accessible · current The IPsec Phase-1 Internet Key Exchange Tunnel Table. There is one entry in this table for each active IPsec Phase-1 IKE Tunnel. | |||||||||||||
| RcikeTunnelEntry | 1.3.6.1.4.1.9.9.171.1.2.3.1 | NA | |||||||||||
row · not-accessible · current Each entry contains the attributes associated with an active IPsec Phase-1 IKE Tunnel.
| |||||||||||||
| CcikeTunIndex | 1.3.6.1.4.1.9.9.171.1.2.3.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The index of the IPsec Phase-1 IKE Tunnel Table. The value of the index is a number which begins at one and is incremented with each tunnel that is created. The value of this object will wrap at 2,147,483,647. | |||||||||||||
| CcikeTunLocalType | 1.3.6.1.4.1.9.9.171.1.2.3.1.2 | IkePeerType | RO | 1 | |||||||||
column · IkePeerType · read-only · current The type of local peer identity. The local peer may be identified by: 1. an IP address, or 2. a host name. Example values from LibreNMS test devices
| |||||||||||||
| CcikeTunLocalValue | 1.3.6.1.4.1.9.9.171.1.2.3.1.3 | DisplayString | RO | <private> | |||||||||
column · DisplayString · read-only · current The value of the local peer identity. If the local peer type is an IP Address, then this is the IP Address used to identify the local peer. If the local peer type is a host name, then this is the host name used to identify the local peer. Example values from LibreNMS test devices
| |||||||||||||
| CcikeTunLocalAddr | 1.3.6.1.4.1.9.9.171.1.2.3.1.4 | IPSIpAddress | RO | <private> | |||||||||
column · IPSIpAddress · read-only · current The IP address of the local endpoint for the IPsec Phase-1 IKE Tunnel. Example values from LibreNMS test devices
| |||||||||||||
| CcikeTunLocalName | 1.3.6.1.4.1.9.9.171.1.2.3.1.5 | DisplayString | RO | <private> | |||||||||
column · DisplayString · read-only · current The DNS name of the local IP address for the IPsec Phase-1 IKE Tunnel. If the DNS name associated with the local tunnel endpoint is not known, then the value of this object will be a NULL string. Example values from LibreNMS test devices
| |||||||||||||
| CcikeTunRemoteType | 1.3.6.1.4.1.9.9.171.1.2.3.1.6 | IkePeerType | RO | 1 | |||||||||
column · IkePeerType · read-only · current The type of remote peer identity. The remote peer may be identified by: 1. an IP address, or 2. a host name. Example values from LibreNMS test devices
| |||||||||||||
| CcikeTunRemoteValue | 1.3.6.1.4.1.9.9.171.1.2.3.1.7 | DisplayString | RO | <private> | |||||||||
column · DisplayString · read-only · current The value of the remote peer identity. If the remote peer type is an IP Address, then this is the IP Address used to identify the remote peer. If the remote peer type is a host name, then this is the host name used to identify the remote peer. Example values from LibreNMS test devices
| |||||||||||||
| CcikeTunRemoteAddr | 1.3.6.1.4.1.9.9.171.1.2.3.1.8 | IPSIpAddress | RO | <private> | |||||||||
column · IPSIpAddress · read-only · current The IP address of the remote endpoint for the IPsec Phase-1 IKE Tunnel. Example values from LibreNMS test devices
| |||||||||||||
| CcikeTunRemoteName | 1.3.6.1.4.1.9.9.171.1.2.3.1.9 | DisplayString | RO | <private> | |||||||||
column · DisplayString · read-only · current The DNS name of the remote IP address of IPsec Phase-1 IKE Tunnel. If the DNS name associated with the remote tunnel endpoint is not known, then the value of this object will be a NULL string. Example values from LibreNMS test devices
| |||||||||||||
| CcikeTunNegoMode | 1.3.6.1.4.1.9.9.171.1.2.3.1.10 | IkeNegoMode | RO | 2 | |||||||||
| CcikeTunDiffHellmanGrp | 1.3.6.1.4.1.9.9.171.1.2.3.1.11 | DiffHellmanGrp | RO | 3 | |||||||||
| CcikeTunEncryptAlgo | 1.3.6.1.4.1.9.9.171.1.2.3.1.12 | EncryptAlgo | RO | 6 | |||||||||
| CcikeTunHashAlgo | 1.3.6.1.4.1.9.9.171.1.2.3.1.13 | IkeHashAlgo | RO | 3 | |||||||||
| CcikeTunAuthMethod | 1.3.6.1.4.1.9.9.171.1.2.3.1.14 | IkeAuthMethod | RO | 2 | |||||||||
| CcikeTunLifeTime | 1.3.6.1.4.1.9.9.171.1.2.3.1.15 | Integer32 (1..2147483647) | RO | 86400 | |||||||||
column · Integer32 (1..2147483647) · read-only · current The negotiated LifeTime of the IPsec Phase-1 IKE Tunnel in seconds.
Example values from LibreNMS test devices
| |||||||||||||
| CcikeTunActiveTime | 1.3.6.1.4.1.9.9.171.1.2.3.1.16 | TimeInterval | RO | 19152400 | |||||||||
| CcikeTunSaRefreshThreshold | 1.3.6.1.4.1.9.9.171.1.2.3.1.17 | Integer32 (1..2147483647) | RO | 82080 | |||||||||
| CcikeTunTotalRefreshes | 1.3.6.1.4.1.9.9.171.1.2.3.1.18 | Counter32 | RO | 2 | |||||||||
| CcikeTunInOctets | 1.3.6.1.4.1.9.9.171.1.2.3.1.19 | Counter32 | RO | 50118 | |||||||||
| CcikeTunInPkts | 1.3.6.1.4.1.9.9.171.1.2.3.1.20 | Counter32 | RO | 148 | |||||||||
| CcikeTunInDropPkts | 1.3.6.1.4.1.9.9.171.1.2.3.1.21 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The total number of packets dropped by this IPsec Phase-1 IKE Tunnel during receive processing.
Example values from LibreNMS test devices
| |||||||||||||
| CcikeTunInNotifys | 1.3.6.1.4.1.9.9.171.1.2.3.1.22 | Counter32 | RO | 9 | |||||||||
| CcikeTunInP2Exchgs | 1.3.6.1.4.1.9.9.171.1.2.3.1.23 | Counter32 | RO | 64 | |||||||||
| CcikeTunInP2ExchgInvalids | 1.3.6.1.4.1.9.9.171.1.2.3.1.24 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The total number of IPsec Phase-2 exchanges received and found to be invalid by this IPsec Phase-1 IKE Tunnel.
Example values from LibreNMS test devices
| |||||||||||||
| CcikeTunInP2ExchgRejects | 1.3.6.1.4.1.9.9.171.1.2.3.1.25 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The total number of IPsec Phase-2 exchanges received and rejected by this IPsec Phase-1 Tunnel.
Example values from LibreNMS test devices
| |||||||||||||
| CcikeTunInP2SaDelRequests | 1.3.6.1.4.1.9.9.171.1.2.3.1.26 | Counter32 | RO | 7 | |||||||||
| CcikeTunOutOctets | 1.3.6.1.4.1.9.9.171.1.2.3.1.27 | Counter32 | RO | 7356 | |||||||||
| CcikeTunOutPkts | 1.3.6.1.4.1.9.9.171.1.2.3.1.28 | Counter32 | RO | 129 | |||||||||
| CcikeTunOutDropPkts | 1.3.6.1.4.1.9.9.171.1.2.3.1.29 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The total number of packets dropped by this IPsec Phase-1 IKE Tunnel during send processing.
Example values from LibreNMS test devices
| |||||||||||||
| CcikeTunOutNotifys | 1.3.6.1.4.1.9.9.171.1.2.3.1.30 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The total number of notifys sent by this IPsec Phase-1 Tunnel.
Example values from LibreNMS test devices
| |||||||||||||
| CcikeTunOutP2Exchgs | 1.3.6.1.4.1.9.9.171.1.2.3.1.31 | Counter32 | RO | 0 | |||||||||
| CcikeTunOutP2ExchgInvalids | 1.3.6.1.4.1.9.9.171.1.2.3.1.32 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The total number of IPsec Phase-2 exchanges sent and found to be invalid by this IPsec Phase-1 IKE Tunnel.
Example values from LibreNMS test devices
| |||||||||||||
| CcikeTunOutP2ExchgRejects | 1.3.6.1.4.1.9.9.171.1.2.3.1.33 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The total number of IPsec Phase-2 exchanges sent and rejected by this IPsec Phase-1 IKE Tunnel.
Example values from LibreNMS test devices
| |||||||||||||
| CcikeTunOutP2SaDelRequests | 1.3.6.1.4.1.9.9.171.1.2.3.1.34 | Counter32 | RO | 56 | |||||||||
| CcikeTunStatus | 1.3.6.1.4.1.9.9.171.1.2.3.1.35 | TunnelStatus | RW | 1 | |||||||||
column · TunnelStatus · read-write · current The status of the MIB table row. This object can be used to bring the tunnel down by setting value of this object to destroy(2). This object cannot be used to create a MIB table row. Example values from LibreNMS test devices
| |||||||||||||
| TcikePeerCorrTable | 1.3.6.1.4.1.9.9.171.1.2.4 | NA | |||||||||||
table · not-accessible · current The IPsec Phase-1 Internet Key Exchange Peer Association to IPsec Phase-2 Tunnel Correlation Table. There is one entry in this table for each active IPsec Phase-2 Tunnel. | |||||||||||||
| RcikePeerCorrEntry | 1.3.6.1.4.1.9.9.171.1.2.4.1 | NA | |||||||||||
row · not-accessible · current Each entry contains the attributes of an IPsec Phase-1 IKE Peer Association to IPsec Phase-2 Tunnel Correlation. | |||||||||||||
| CcikePeerCorrLocalType | 1.3.6.1.4.1.9.9.171.1.2.4.1.1 | IkePeerType | NA | ||||||||||
column · IkePeerType · not-accessible · current The type of local peer identity. The local peer may be identified by: 1. an IP address, or 2. a host name. | |||||||||||||
| CcikePeerCorrLocalValue | 1.3.6.1.4.1.9.9.171.1.2.4.1.2 | DisplayString | NA | ||||||||||
column · DisplayString · not-accessible · current The value of the local peer identity. If the local peer type is an IP Address, then this is the IP Address used to identify the local peer. If the local peer type is a host name, then this is the host name used to identify the local peer. | |||||||||||||
| CcikePeerCorrRemoteType | 1.3.6.1.4.1.9.9.171.1.2.4.1.3 | IkePeerType | NA | ||||||||||
column · IkePeerType · not-accessible · current The type of remote peer identity. The remote peer may be identified by: 1. an IP address, or 2. a host name. | |||||||||||||
| CcikePeerCorrRemoteValue | 1.3.6.1.4.1.9.9.171.1.2.4.1.4 | DisplayString | NA | ||||||||||
column · DisplayString · not-accessible · current The value of the remote peer identity. If the remote peer type is an IP Address, then this is the IP Address used to identify the remote peer. If the remote peer type is a host name, then this is the host name used to identify the remote peer. | |||||||||||||
| CcikePeerCorrIntIndex | 1.3.6.1.4.1.9.9.171.1.2.4.1.5 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The internal index of the local-remote peer association. This internal index is used to uniquely identify multiple associations between the local and remote peer. | |||||||||||||
| CcikePeerCorrSeqNum | 1.3.6.1.4.1.9.9.171.1.2.4.1.6 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The sequence number of the local-remote peer association. This sequence number is used to uniquely identify multiple instances of an unique association between the local and remote peer. | |||||||||||||
| CcikePeerCorrIpSecTunIndex | 1.3.6.1.4.1.9.9.171.1.2.4.1.7 | Integer32 (1..2147483647) | RO | ||||||||||
column · Integer32 (1..2147483647) · read-only · current The index of the active IPsec Phase-2 Tunnel (cipSecTunIndex in the cipSecTunnelTable) for this IPsec Phase-1 IKE Peer Association. | |||||||||||||
| TcikePhase1GWStatsTable | 1.3.6.1.4.1.9.9.171.1.2.5 | NA | |||||||||||
table · not-accessible · current Phase-1 IKE stats information is included in this table. Each entry is related to a specific gateway which is identified by 'cmgwIndex'. | |||||||||||||
| RcikePhase1GWStatsEntry | 1.3.6.1.4.1.9.9.171.1.2.5.1 | NA | |||||||||||
row · not-accessible · current Each entry contains the attributes of an Phase-1 IKE stats information for the related gateway. There is only one entry for each gateway. The entry is created when a gateway up and cannot be deleted.
| |||||||||||||
| CcikePhase1GWActiveTunnels | 1.3.6.1.4.1.9.9.171.1.2.5.1.1 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The number of currently active IPsec Phase-1 IKE Tunnels. | |||||||||||||
| CcikePhase1GWPreviousTunnels | 1.3.6.1.4.1.9.9.171.1.2.5.1.2 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of previously active IPsec Phase-1 IKE Tunnels.
| |||||||||||||
| CcikePhase1GWInOctets | 1.3.6.1.4.1.9.9.171.1.2.5.1.3 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of octets received by all currently and previously active IPsec Phase-1 IKE Tunnels.
| |||||||||||||
| CcikePhase1GWInPkts | 1.3.6.1.4.1.9.9.171.1.2.5.1.4 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of packets received by all currently and previously active IPsec Phase-1 IKE Tunnels.
| |||||||||||||
| CcikePhase1GWInDropPkts | 1.3.6.1.4.1.9.9.171.1.2.5.1.5 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of packets which were dropped during receive processing by all currently and previously active IPsec Phase-1 IKE Tunnels.
| |||||||||||||
| CcikePhase1GWInNotifys | 1.3.6.1.4.1.9.9.171.1.2.5.1.6 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of notifys received by all currently and previously active IPsec Phase-1 IKE Tunnels.
| |||||||||||||
| CcikePhase1GWInP2Exchgs | 1.3.6.1.4.1.9.9.171.1.2.5.1.7 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of IPsec Phase-2 exchanges received by all currently and previously active IPsec Phase-1 IKE Tunnels.
| |||||||||||||
| CcikePhase1GWInP2ExchgInvalids | 1.3.6.1.4.1.9.9.171.1.2.5.1.8 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of IPsec Phase-2 exchanges which were received and found to be invalid by all currently and previously active IPsec Phase-1 IKE Tunnels.
| |||||||||||||
| CcikePhase1GWInP2ExchgRejects | 1.3.6.1.4.1.9.9.171.1.2.5.1.9 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of IPsec Phase-2 exchanges which were received and rejected by all currently and previously active IPsec Phase-1 IKE Tunnels.
| |||||||||||||
| CcikePhase1GWInP2SaDelRequests | 1.3.6.1.4.1.9.9.171.1.2.5.1.10 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of IPsec Phase-2 'Security Association' delete requests received by all currently and previously active and IPsec Phase-1 IKE Tunnels.
| |||||||||||||
| CcikePhase1GWOutOctets | 1.3.6.1.4.1.9.9.171.1.2.5.1.11 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of octets sent by all currently and previously active and IPsec Phase-1 IKE Tunnels.
| |||||||||||||
| CcikePhase1GWOutPkts | 1.3.6.1.4.1.9.9.171.1.2.5.1.12 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of packets sent by all currently and previously active and IPsec Phase-1 Tunnels.
| |||||||||||||
| CcikePhase1GWOutDropPkts | 1.3.6.1.4.1.9.9.171.1.2.5.1.13 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of packets which were dropped during send processing by all currently and previously active IPsec Phase-1 IKE Tunnels.
| |||||||||||||
| CcikePhase1GWOutNotifys | 1.3.6.1.4.1.9.9.171.1.2.5.1.14 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of notifys sent by all currently and previously active IPsec Phase-1 IKE Tunnels.
| |||||||||||||
| CcikePhase1GWOutP2Exchgs | 1.3.6.1.4.1.9.9.171.1.2.5.1.15 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of IPsec Phase-2 exchanges which were sent by all currently and previously active IPsec Phase-1 IKE Tunnels.
| |||||||||||||
| CcikePhase1GWOutP2ExchgInvalids | 1.3.6.1.4.1.9.9.171.1.2.5.1.16 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of IPsec Phase-2 exchanges which were sent and found to be invalid by all currently and previously active IPsec Phase-1 Tunnels.
| |||||||||||||
| CcikePhase1GWOutP2ExchgRejects | 1.3.6.1.4.1.9.9.171.1.2.5.1.17 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of IPsec Phase-2 exchanges which were sent and rejected by all currently and previously active IPsec Phase-1 IKE Tunnels.
| |||||||||||||
| CcikePhase1GWOutP2SaDelRequests | 1.3.6.1.4.1.9.9.171.1.2.5.1.18 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of IPsec Phase-2 SA delete requests sent by all currently and previously active IPsec Phase-1 IKE Tunnels.
| |||||||||||||
| CcikePhase1GWInitTunnels | 1.3.6.1.4.1.9.9.171.1.2.5.1.19 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of IPsec Phase-1 IKE Tunnels which were locally initiated.
| |||||||||||||
| CcikePhase1GWInitTunnelFails | 1.3.6.1.4.1.9.9.171.1.2.5.1.20 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of IPsec Phase-1 IKE Tunnels which were locally initiated and failed to activate.
| |||||||||||||
| CcikePhase1GWRespTunnelFails | 1.3.6.1.4.1.9.9.171.1.2.5.1.21 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of IPsec Phase-1 IKE Tunnels which were remotely initiated and failed to activate.
| |||||||||||||
| CcikePhase1GWSysCapFails | 1.3.6.1.4.1.9.9.171.1.2.5.1.22 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of system capacity failures which occurred during processing of all current and previously active IPsec Phase-1 IKE Tunnels.
| |||||||||||||
| CcikePhase1GWAuthFails | 1.3.6.1.4.1.9.9.171.1.2.5.1.23 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of authentications which ended in failure by all current and previous IPsec Phase-1 IKE Tunnels.
| |||||||||||||
| CcikePhase1GWDecryptFails | 1.3.6.1.4.1.9.9.171.1.2.5.1.24 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of decryptions which ended in failure by all current and previous IPsec Phase-1 IKE Tunnels.
| |||||||||||||
| CcikePhase1GWHashValidFails | 1.3.6.1.4.1.9.9.171.1.2.5.1.25 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of hash validations which ended in failure by all current and previous IPsec Phase-1 IKE Tunnels.
| |||||||||||||
| CcikePhase1GWNoSaFails | 1.3.6.1.4.1.9.9.171.1.2.5.1.26 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of non-existent 'Security Association' failures occurred during processing of current and previous IPsec Phase-1 IKE Tunnels.
| |||||||||||||
| NcipSecPhaseTwo | 1.3.6.1.4.1.9.9.171.1.3 | ||||||||||||
| NcipSecGlobalStats | 1.3.6.1.4.1.9.9.171.1.3.1 | ||||||||||||
| ScipSecGlobalActiveTunnels | 1.3.6.1.4.1.9.9.171.1.3.1.1 | Gauge32 | RO | 0 | |||||||||
scalar · Gauge32 · read-only · current The total number of currently active IPsec Phase-2 Tunnels. Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalPreviousTunnels | 1.3.6.1.4.1.9.9.171.1.3.1.2 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of previously active IPsec Phase-2 Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalInOctets | 1.3.6.1.4.1.9.9.171.1.3.1.3 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of octets received by all current and previous IPsec Phase-2 Tunnels. This value is accumulated BEFORE determining whether or not the packet should be decompressed. See also cipSecGlobalInOctWraps for the number of times this counter has wrapped.
Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalHcInOctets | 1.3.6.1.4.1.9.9.171.1.3.1.4 | Counter64 | RO | 0 | |||||||||
scalar · Counter64 · read-only · current A high capacity count of the total number of octets received by all current and previous IPsec Phase-2 Tunnels. This value is accumulated BEFORE determining whether or not the packet should be decompressed. Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalInOctWraps | 1.3.6.1.4.1.9.9.171.1.3.1.5 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The number of times the global octets received counter (cipSecGlobalInOctets) has wrapped.
Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalInDecompOctets | 1.3.6.1.4.1.9.9.171.1.3.1.6 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of decompressed octets received by all current and previous IPsec Phase-2 Tunnels. This value is accumulated AFTER the packet is decompressed. If compression is not being used, this value will match the value of cipSecGlobalInOctets. See also cipSecGlobalInDecompOctWraps for the number of times this counter has wrapped.
Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalHcInDecompOctets | 1.3.6.1.4.1.9.9.171.1.3.1.7 | Counter64 | RO | 0 | |||||||||
scalar · Counter64 · read-only · current A high capacity count of the total number of decompressed octets received by all current and previous IPsec Phase-2 Tunnels. This value is accumulated AFTER the packet is decompressed. If compression is not being used, this value will match the value of cipSecGlobalHcInOctets. Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalInDecompOctWraps | 1.3.6.1.4.1.9.9.171.1.3.1.8 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The number of times the global decompressed octets received counter (cipSecGlobalInDecompOctets) has wrapped.
Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalInPkts | 1.3.6.1.4.1.9.9.171.1.3.1.9 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of packets received by all current and previous IPsec Phase-2 Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalInDrops | 1.3.6.1.4.1.9.9.171.1.3.1.10 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of packets dropped during receive processing by all current and previous IPsec Phase-2 Tunnels. This count does NOT include packets dropped due to Anti-Replay processing.
Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalInReplayDrops | 1.3.6.1.4.1.9.9.171.1.3.1.11 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of packets dropped during receive processing due to Anti-Replay processing by all current and previous IPsec Phase-2 Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalInAuths | 1.3.6.1.4.1.9.9.171.1.3.1.12 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of inbound authentication's performed by all current and previous IPsec Phase-2 Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalInAuthFails | 1.3.6.1.4.1.9.9.171.1.3.1.13 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of inbound authentication's which ended in failure by all current and previous IPsec Phase-2 Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalInDecrypts | 1.3.6.1.4.1.9.9.171.1.3.1.14 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of inbound decryption's performed by all current and previous IPsec Phase-2 Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalInDecryptFails | 1.3.6.1.4.1.9.9.171.1.3.1.15 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of inbound decryption's which ended in failure by all current and previous IPsec Phase-2 Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalOutOctets | 1.3.6.1.4.1.9.9.171.1.3.1.16 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of octets sent by all current and previous IPsec Phase-2 Tunnels. This value is accumulated AFTER determining whether or not the packet should be compressed. See also cipSecGlobalOutOctWraps for the number of times this counter has wrapped.
Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalHcOutOctets | 1.3.6.1.4.1.9.9.171.1.3.1.17 | Counter64 | RO | 0 | |||||||||
scalar · Counter64 · read-only · current A high capacity count of the total number of octets sent by all current and previous IPsec Phase-2 Tunnels. This value is accumulated AFTER determining whether or not the packet should be compressed. Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalOutOctWraps | 1.3.6.1.4.1.9.9.171.1.3.1.18 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The number of times the global octets sent counter (cipSecGlobalOutOctets) has wrapped.
Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalOutUncompOctets | 1.3.6.1.4.1.9.9.171.1.3.1.19 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of uncompressed octets sent by all current and previous IPsec Phase-2 Tunnels. This value is accumulated BEFORE the packet is compressed. If compression is not being used, this value will match the value of cipSecGlobalOutOctets. See also cipSecGlobalOutDecompOctWraps for the number of times this counter has wrapped.
Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalHcOutUncompOctets | 1.3.6.1.4.1.9.9.171.1.3.1.20 | Counter64 | RO | 0 | |||||||||
scalar · Counter64 · read-only · current A high capacity count of the total number of
uncompressed octets sent by all current and previous
IPsec Phase-2 Tunnels. This value is accumulated
BEFORE the packet is compressed. If compression is
not being used, this value will match the
value of cipSecGlobalHcOutOctets.
Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalOutUncompOctWraps | 1.3.6.1.4.1.9.9.171.1.3.1.21 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The number of times the global uncompressed octets sent counter (cipSecGlobalOutUncompOctets) has wrapped.
Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalOutPkts | 1.3.6.1.4.1.9.9.171.1.3.1.22 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of packets sent by all current and previous IPsec Phase-2 Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalOutDrops | 1.3.6.1.4.1.9.9.171.1.3.1.23 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of packets dropped during send processing by all current and previous IPsec Phase-2 Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalOutAuths | 1.3.6.1.4.1.9.9.171.1.3.1.24 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of outbound authentication's performed by all current and previous IPsec Phase-2 Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalOutAuthFails | 1.3.6.1.4.1.9.9.171.1.3.1.25 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of outbound authentication's which ended in failure by all current and previous IPsec Phase-2 Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalOutEncrypts | 1.3.6.1.4.1.9.9.171.1.3.1.26 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of outbound encryption's performed by all current and previous IPsec Phase-2 Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalOutEncryptFails | 1.3.6.1.4.1.9.9.171.1.3.1.27 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of outbound encryption's which ended in failure by all current and previous IPsec Phase-2 Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalProtocolUseFails | 1.3.6.1.4.1.9.9.171.1.3.1.28 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of protocol use failures which occurred during processing of all current and previously active IPsec Phase-2 Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalNoSaFails | 1.3.6.1.4.1.9.9.171.1.3.1.29 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of non-existent Security Association in failures which occurred during processing of all current and previous IPsec Phase-2 Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| ScipSecGlobalSysCapFails | 1.3.6.1.4.1.9.9.171.1.3.1.30 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current The total number of system capacity failures which occurred during processing of all current and previously active IPsec Phase-2 Tunnels.
Example values from LibreNMS test devices
| |||||||||||||
| TcipSecTunnelTable | 1.3.6.1.4.1.9.9.171.1.3.2 | NA | |||||||||||
table · not-accessible · current The IPsec Phase-2 Tunnel Table. There is one entry in this table for each active IPsec Phase-2 Tunnel. | |||||||||||||
| RcipSecTunnelEntry | 1.3.6.1.4.1.9.9.171.1.3.2.1 | NA | |||||||||||
row · not-accessible · current Each entry contains the attributes associated with an active IPsec Phase-2 Tunnel.
| |||||||||||||
| CcipSecTunIndex | 1.3.6.1.4.1.9.9.171.1.3.2.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The index of the IPsec Phase-2 Tunnel Table. The value of the index is a number which begins at one and is incremented with each tunnel that is created. The value of this object will wrap at 2,147,483,647. | |||||||||||||
| CcipSecTunIkeTunnelIndex | 1.3.6.1.4.1.9.9.171.1.3.2.1.2 | Integer32 (1..2147483647) | RO | 13876 | |||||||||
| CcipSecTunIkeTunnelAlive | 1.3.6.1.4.1.9.9.171.1.3.2.1.3 | TruthValue | RO | 1 | |||||||||
column · TruthValue · read-only · current An indicator which specifies whether or not the IPsec Phase-1 IKE Tunnel currently exists. Example values from LibreNMS test devices
| |||||||||||||
| CcipSecTunLocalAddr | 1.3.6.1.4.1.9.9.171.1.3.2.1.4 | IPSIpAddress | RO | 95:d9:63:05 | |||||||||
column · IPSIpAddress · read-only · current The IP address of the local endpoint for the IPsec Phase-2 Tunnel. Example values from LibreNMS test devices
| |||||||||||||
| CcipSecTunRemoteAddr | 1.3.6.1.4.1.9.9.171.1.3.2.1.5 | IPSIpAddress | RO | c4:2c:8c:d6 | |||||||||
| CcipSecTunKeyType | 1.3.6.1.4.1.9.9.171.1.3.2.1.6 | KeyType | RO | 1 | |||||||||
column · KeyType · read-only · current The type of key used by the IPsec Phase-2 Tunnel. Example values from LibreNMS test devices
| |||||||||||||
| CcipSecTunEncapMode | 1.3.6.1.4.1.9.9.171.1.3.2.1.7 | EncapMode | RO | 1 | |||||||||
column · EncapMode · read-only · current The encapsulation mode used by the IPsec Phase-2 Tunnel. Example values from LibreNMS test devices
| |||||||||||||
| CcipSecTunLifeSize | 1.3.6.1.4.1.9.9.171.1.3.2.1.8 | Integer32 (1..2147483647) | RO | 4608000 | |||||||||
column · Integer32 (1..2147483647) · read-only · current The negotiated LifeSize of the IPsec Phase-2 Tunnel in kilobytes.
Example values from LibreNMS test devices
| |||||||||||||
| CcipSecTunLifeTime | 1.3.6.1.4.1.9.9.171.1.3.2.1.9 | Integer32 (1..2147483647) | RO | 28800 | |||||||||
column · Integer32 (1..2147483647) · read-only · current The negotiated LifeTime of the IPsec Phase-2 Tunnel in seconds.
Example values from LibreNMS test devices
| |||||||||||||
| CcipSecTunActiveTime | 1.3.6.1.4.1.9.9.171.1.3.2.1.10 | TimeInterval | RO | 19152100 | |||||||||
| CcipSecTunSaLifeSizeThreshold | 1.3.6.1.4.1.9.9.171.1.3.2.1.11 | Integer32 (1..2147483647) | RO | 4374000 | |||||||||
| CcipSecTunSaLifeTimeThreshold | 1.3.6.1.4.1.9.9.171.1.3.2.1.12 | Integer32 (1..2147483647) | RO | 28800 | |||||||||
column · Integer32 (1..2147483647) · read-only · current The security association LifeTime refresh threshold in seconds.
Example values from LibreNMS test devices
| |||||||||||||
| CcipSecTunTotalRefreshes | 1.3.6.1.4.1.9.9.171.1.3.2.1.13 | Counter32 | RO | 9 | |||||||||
| CcipSecTunExpiredSaInstances | 1.3.6.1.4.1.9.9.171.1.3.2.1.14 | Counter32 | RO | 9 | |||||||||
| CcipSecTunCurrentSaInstances | 1.3.6.1.4.1.9.9.171.1.3.2.1.15 | Gauge32 | RO | 1 | |||||||||
column · Gauge32 · read-only · current The number of security associations which are currently active or expiring. Example values from LibreNMS test devices
| |||||||||||||
| CcipSecTunInSaDiffHellmanGrp | 1.3.6.1.4.1.9.9.171.1.3.2.1.16 | DiffHellmanGrp | RO | 1 | |||||||||
| CcipSecTunInSaEncryptAlgo | 1.3.6.1.4.1.9.9.171.1.3.2.1.17 | EncryptAlgo | RO | 4 | |||||||||
| CcipSecTunInSaAhAuthAlgo | 1.3.6.1.4.1.9.9.171.1.3.2.1.18 | AuthAlgo | RO | 1 | |||||||||
column · AuthAlgo · read-only · current The authentication algorithm used by the inbound authentication header (AH) security association of the IPsec Phase-2 Tunnel. Example values from LibreNMS test devices
| |||||||||||||
| CcipSecTunInSaEspAuthAlgo | 1.3.6.1.4.1.9.9.171.1.3.2.1.19 | AuthAlgo | RO | 3 | |||||||||
| CcipSecTunInSaDecompAlgo | 1.3.6.1.4.1.9.9.171.1.3.2.1.20 | CompAlgo | RO | 1 | |||||||||
column · CompAlgo · read-only · current The decompression algorithm used by the inbound security association of the IPsec Phase-2 Tunnel. Example values from LibreNMS test devices
| |||||||||||||
| CcipSecTunOutSaDiffHellmanGrp | 1.3.6.1.4.1.9.9.171.1.3.2.1.21 | DiffHellmanGrp | RO | 1 | |||||||||
| CcipSecTunOutSaEncryptAlgo | 1.3.6.1.4.1.9.9.171.1.3.2.1.22 | EncryptAlgo | RO | 4 | |||||||||
| CcipSecTunOutSaAhAuthAlgo | 1.3.6.1.4.1.9.9.171.1.3.2.1.23 | AuthAlgo | RO | 1 | |||||||||
column · AuthAlgo · read-only · current The authentication algorithm used by the outbound authentication header (AH) security association of the IPsec Phase-2 Tunnel. Example values from LibreNMS test devices
| |||||||||||||
| CcipSecTunOutSaEspAuthAlgo | 1.3.6.1.4.1.9.9.171.1.3.2.1.24 | AuthAlgo | RO | 3 | |||||||||
| CcipSecTunOutSaCompAlgo | 1.3.6.1.4.1.9.9.171.1.3.2.1.25 | CompAlgo | RO | 1 | |||||||||
column · CompAlgo · read-only · current The compression algorithm used by the inbound security association of the IPsec Phase-2 Tunnel. Example values from LibreNMS test devices
| |||||||||||||
| CcipSecTunInOctets | 1.3.6.1.4.1.9.9.171.1.3.2.1.26 | Counter32 | RO | 2243185 | |||||||||
column · Counter32 · read-only · current The total number of octets received by this IPsec Phase-2 Tunnel. This value is accumulated BEFORE determining whether or not the packet should be decompressed. See also cipSecTunInOctWraps for the number of times this counter has wrapped.
| |||||||||||||
| CcipSecTunHcInOctets | 1.3.6.1.4.1.9.9.171.1.3.2.1.27 | Counter64 | RO | 2243185 | |||||||||
column · Counter64 · read-only · current A high capacity count of the total number of octets received by this IPsec Phase-2 Tunnel. This value is accumulated BEFORE determining whether or not the packet should be decompressed.
| |||||||||||||
| CcipSecTunInOctWraps | 1.3.6.1.4.1.9.9.171.1.3.2.1.28 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The number of times the octets received counter (cipSecTunInOctets) has wrapped.
Example values from LibreNMS test devices
| |||||||||||||
| CcipSecTunInDecompOctets | 1.3.6.1.4.1.9.9.171.1.3.2.1.29 | Counter32 | RO | 2243185 | |||||||||
column · Counter32 · read-only · current The total number of decompressed octets received by this IPsec Phase-2 Tunnel. This value is accumulated AFTER the packet is decompressed. If compression is not being used, this value will match the value of cipSecTunInOctets. See also cipSecTunInDecompOctWraps for the number of times this counter has wrapped.
| |||||||||||||
| CcipSecTunHcInDecompOctets | 1.3.6.1.4.1.9.9.171.1.3.2.1.30 | Counter64 | RO | 2243185 | |||||||||
column · Counter64 · read-only · current A high capacity count of the total number of decompressed octets received by this IPsec Phase-2 Tunnel. This value is accumulated AFTER the packet is decompressed. If compression is not being used, this value will match the value of cipSecTunHcInOctets. | |||||||||||||
| CcipSecTunInDecompOctWraps | 1.3.6.1.4.1.9.9.171.1.3.2.1.31 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The number of times the decompressed octets received counter (cipSecTunInDecompOctets) has wrapped.
Example values from LibreNMS test devices
| |||||||||||||
| CcipSecTunInPkts | 1.3.6.1.4.1.9.9.171.1.3.2.1.32 | Counter32 | RO | 36366 | |||||||||
| CcipSecTunInDropPkts | 1.3.6.1.4.1.9.9.171.1.3.2.1.33 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The total number of packets dropped during receive processing by this IPsec Phase-2 Tunnel. This count does NOT include packets dropped due to Anti-Replay processing.
Example values from LibreNMS test devices
| |||||||||||||
| CcipSecTunInReplayDropPkts | 1.3.6.1.4.1.9.9.171.1.3.2.1.34 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The total number of packets dropped during receive processing due to Anti-Replay processing by this IPsec Phase-2 Tunnel.
Example values from LibreNMS test devices
| |||||||||||||
| CcipSecTunInAuths | 1.3.6.1.4.1.9.9.171.1.3.2.1.35 | Counter32 | RO | 36366 | |||||||||
| CcipSecTunInAuthFails | 1.3.6.1.4.1.9.9.171.1.3.2.1.36 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The total number of inbound authentication's which ended in failure by this IPsec Phase-2 Tunnel .
Example values from LibreNMS test devices
| |||||||||||||
| CcipSecTunInDecrypts | 1.3.6.1.4.1.9.9.171.1.3.2.1.37 | Counter32 | RO | 36366 | |||||||||
| CcipSecTunInDecryptFails | 1.3.6.1.4.1.9.9.171.1.3.2.1.38 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The total number of inbound decryption's which ended in failure by this IPsec Phase-2 Tunnel.
Example values from LibreNMS test devices
| |||||||||||||
| CcipSecTunOutOctets | 1.3.6.1.4.1.9.9.171.1.3.2.1.39 | Counter32 | RO | 1957593 | |||||||||
column · Counter32 · read-only · current The total number of octets sent by this IPsec Phase-2 Tunnel. This value is accumulated AFTER determining whether or not the packet should be compressed. See also cipSecTunOutOctWraps for the number of times this counter has wrapped.
| |||||||||||||
| CcipSecTunHcOutOctets | 1.3.6.1.4.1.9.9.171.1.3.2.1.40 | Counter64 | RO | 1957593 | |||||||||
column · Counter64 · read-only · current A high capacity count of the total number of octets sent by this IPsec Phase-2 Tunnel. This value is accumulated AFTER determining whether or not the packet should be compressed. | |||||||||||||
| CcipSecTunOutOctWraps | 1.3.6.1.4.1.9.9.171.1.3.2.1.41 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The number of times the out octets counter (cipSecTunOutOctets) has wrapped.
Example values from LibreNMS test devices
| |||||||||||||
| CcipSecTunOutUncompOctets | 1.3.6.1.4.1.9.9.171.1.3.2.1.42 | Counter32 | RO | 1957593 | |||||||||
column · Counter32 · read-only · current The total number of uncompressed octets sent by this IPsec Phase-2 Tunnel. This value is accumulated BEFORE the packet is compressed. If compression is not being used, this value will match the value of cipSecTunOutOctets. See also cipSecTunOutDecompOctWraps for the number of times this counter has wrapped.
| |||||||||||||
| CcipSecTunHcOutUncompOctets | 1.3.6.1.4.1.9.9.171.1.3.2.1.43 | Counter64 | RO | 1957593 | |||||||||
column · Counter64 · read-only · current A high capacity count of the total number of uncompressed octets sent by this IPsec Phase-2 Tunnel. This value is accumulated BEFORE the packet is compressed. If compression is not being used, this value will match the value of cipSecTunHcOutOctets. | |||||||||||||
| CcipSecTunOutUncompOctWraps | 1.3.6.1.4.1.9.9.171.1.3.2.1.44 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The number of times the uncompressed octets sent counter (cipSecTunOutUncompOctets) has wrapped.
Example values from LibreNMS test devices
| |||||||||||||
| CcipSecTunOutPkts | 1.3.6.1.4.1.9.9.171.1.3.2.1.45 | Counter32 | RO | 32600 | |||||||||
| CcipSecTunOutDropPkts | 1.3.6.1.4.1.9.9.171.1.3.2.1.46 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The total number of packets dropped during send processing by this IPsec Phase-2 Tunnel.
Example values from LibreNMS test devices
| |||||||||||||
| CcipSecTunOutAuths | 1.3.6.1.4.1.9.9.171.1.3.2.1.47 | Counter32 | RO | 32600 | |||||||||
| CcipSecTunOutAuthFails | 1.3.6.1.4.1.9.9.171.1.3.2.1.48 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The total number of outbound authentication's which ended in failure by this IPsec Phase-2 Tunnel.
Example values from LibreNMS test devices
| |||||||||||||
| CcipSecTunOutEncrypts | 1.3.6.1.4.1.9.9.171.1.3.2.1.49 | Counter32 | RO | 32600 | |||||||||
| CcipSecTunOutEncryptFails | 1.3.6.1.4.1.9.9.171.1.3.2.1.50 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The total number of outbound encryption's which ended in failure by this IPsec Phase-2 Tunnel.
Example values from LibreNMS test devices
| |||||||||||||
| CcipSecTunStatus | 1.3.6.1.4.1.9.9.171.1.3.2.1.51 | TunnelStatus | RW | 1 | |||||||||
column · TunnelStatus · read-write · current The status of the MIB table row. This object can be used to bring the tunnel down by setting value of this object to destroy(2). When the value is set to destroy(2), the SA bundle is destroyed and this row is deleted from this table. When this MIB value is queried, the value of active(1) is always returned, if the instance exists. This object cannot be used to create a MIB table row. Example values from LibreNMS test devices
| |||||||||||||
| TcipSecEndPtTable | 1.3.6.1.4.1.9.9.171.1.3.3 | NA | |||||||||||
table · not-accessible · current The IPsec Phase-2 Tunnel Endpoint Table. This table contains an entry for each active endpoint associated with an IPsec Phase-2 Tunnel. | |||||||||||||
| RcipSecEndPtEntry | 1.3.6.1.4.1.9.9.171.1.3.3.1 | NA | |||||||||||
row · not-accessible · current An IPsec Phase-2 Tunnel Endpoint entry. | |||||||||||||
| CcipSecEndPtIndex | 1.3.6.1.4.1.9.9.171.1.3.3.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The number of the Endpoint associated with the IPsec Phase-2 Tunnel Table. The value of this index is a number which begins at one and is incremented with each Endpoint associated with an IPsec Phase-2 Tunnel. The value of this object will wrap at 2,147,483,647. | |||||||||||||
| CcipSecEndPtLocalName | 1.3.6.1.4.1.9.9.171.1.3.3.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The DNS name of the local Endpoint. | |||||||||||||
| CcipSecEndPtLocalType | 1.3.6.1.4.1.9.9.171.1.3.3.1.3 | EndPtType | RO | ||||||||||
column · EndPtType · read-only · current The type of identity for the local Endpoint. Possible values are: 1) a single IP address, or 2) an IP address range, or 3) an IP subnet. | |||||||||||||
| CcipSecEndPtLocalAddr1 | 1.3.6.1.4.1.9.9.171.1.3.3.1.4 | IPSIpAddress | RO | ||||||||||
column · IPSIpAddress · read-only · current The local Endpoint's first IP address specification. If the local Endpoint type is single IP address, then this is the value of the IP address. If the local Endpoint type is IP subnet, then this is the value of the subnet. If the local Endpoint type is IP address range, then this is the value of beginning IP address of the range. | |||||||||||||
| CcipSecEndPtLocalAddr2 | 1.3.6.1.4.1.9.9.171.1.3.3.1.5 | IPSIpAddress | RO | ||||||||||
column · IPSIpAddress · read-only · current The local Endpoint's second IP address specification. If the local Endpoint type is single IP address, then this is the value of the IP address. If the local Endpoint type is IP subnet, then this is the value of the subnet mask. If the local Endpoint type is IP address range, then this is the value of ending IP address of the range. | |||||||||||||
| CcipSecEndPtLocalProtocol | 1.3.6.1.4.1.9.9.171.1.3.3.1.6 | Integer32 (0..255) | RO | ||||||||||
column · Integer32 (0..255) · read-only · current The protocol number of the local Endpoint's traffic. | |||||||||||||
| CcipSecEndPtLocalPort | 1.3.6.1.4.1.9.9.171.1.3.3.1.7 | Integer32 (0..65535) | RO | ||||||||||
column · Integer32 (0..65535) · read-only · current The port number of the local Endpoint's traffic. | |||||||||||||
| CcipSecEndPtRemoteName | 1.3.6.1.4.1.9.9.171.1.3.3.1.8 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The DNS name of the remote Endpoint. | |||||||||||||
| CcipSecEndPtRemoteType | 1.3.6.1.4.1.9.9.171.1.3.3.1.9 | EndPtType | RO | ||||||||||
column · EndPtType · read-only · current The type of identity for the remote Endpoint. Possible values are: 1) a single IP address, or 2) an IP address range, or 3) an IP subnet. | |||||||||||||
| CcipSecEndPtRemoteAddr1 | 1.3.6.1.4.1.9.9.171.1.3.3.1.10 | IPSIpAddress | RO | ||||||||||
column · IPSIpAddress · read-only · current The remote Endpoint's first IP address specification. If the remote Endpoint type is single IP address, then this is the value of the IP address. If the remote Endpoint type is IP subnet, then this is the value of the subnet. If the remote Endpoint type is IP address range, then this is the value of beginning IP address of the range. | |||||||||||||
| CcipSecEndPtRemoteAddr2 | 1.3.6.1.4.1.9.9.171.1.3.3.1.11 | IPSIpAddress | RO | ||||||||||
column · IPSIpAddress · read-only · current The remote Endpoint's second IP address specification. If the remote Endpoint type is single IP address, then this is the value of the IP address. If the remote Endpoint type is IP subnet, then this is the value of the subnet mask. If the remote Endpoint type is IP address range, then this is the value of ending IP address of the range. | |||||||||||||
| CcipSecEndPtRemoteProtocol | 1.3.6.1.4.1.9.9.171.1.3.3.1.12 | Integer32 (0..255) | RO | ||||||||||
column · Integer32 (0..255) · read-only · current The protocol number of the remote Endpoint's traffic. | |||||||||||||
| CcipSecEndPtRemotePort | 1.3.6.1.4.1.9.9.171.1.3.3.1.13 | Integer32 (0..65535) | RO | ||||||||||
column · Integer32 (0..65535) · read-only · current The port number of the remote Endpoint's traffic. | |||||||||||||
| TcipSecSpiTable | 1.3.6.1.4.1.9.9.171.1.3.4 | NA | |||||||||||
table · not-accessible · current The IPsec Phase-2 Security Protection Index Table. This table contains an entry for each active and expiring security association. | |||||||||||||
| RcipSecSpiEntry | 1.3.6.1.4.1.9.9.171.1.3.4.1 | NA | |||||||||||
row · not-accessible · current Each entry contains the attributes associated with active and expiring IPsec Phase-2 security associations.
| |||||||||||||
| CcipSecSpiIndex | 1.3.6.1.4.1.9.9.171.1.3.4.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The number of the SPI associated with the Phase-2 Tunnel Table. The value of this index is a number which begins at one and is incremented with each SPI associated with an IPsec Phase-2 Tunnel. The value of this object will wrap at 2,147,483,647. | |||||||||||||
| CcipSecSpiDirection | 1.3.6.1.4.1.9.9.171.1.3.4.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The direction of the SPI.
| |||||||||||||
| CcipSecSpiValue | 1.3.6.1.4.1.9.9.171.1.3.4.1.3 | Unsigned32 (1..4294967295) | RO | ||||||||||
column · Unsigned32 (1..4294967295) · read-only · current The value of the SPI. | |||||||||||||
| CcipSecSpiProtocol | 1.3.6.1.4.1.9.9.171.1.3.4.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The protocol of the SPI.
| |||||||||||||
| CcipSecSpiStatus | 1.3.6.1.4.1.9.9.171.1.3.4.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of the SPI.
| |||||||||||||
| TcipSecPhase2GWStatsTable | 1.3.6.1.4.1.9.9.171.1.3.5 | NA | |||||||||||
table · not-accessible · current Phase-2 IPsec stats information is included in this table. Each entry is related to a specific gateway which is identified by 'cmgwIndex' | |||||||||||||
| RcipSecPhase2GWStatsEntry | 1.3.6.1.4.1.9.9.171.1.3.5.1 | NA | |||||||||||
row · not-accessible · current Each entry contains the attributes of an Phase-2 IPsec stats information for the related gateway. There is only one entry for each gateway. The entry is created when a gateway up and cannot be deleted.
| |||||||||||||
| CcipSecPhase2GWActiveTunnels | 1.3.6.1.4.1.9.9.171.1.3.5.1.1 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The total number of currently active IPsec Phase-2 Tunnels. | |||||||||||||
| CcipSecPhase2GWPreviousTunnels | 1.3.6.1.4.1.9.9.171.1.3.5.1.2 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of previously active IPsec Phase-2 Tunnels.
| |||||||||||||
| CcipSecPhase2GWInOctets | 1.3.6.1.4.1.9.9.171.1.3.5.1.3 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of octets received by all current and previous IPsec Phase-2 Tunnels. This value is accumulated BEFORE determining whether or not the packet should be decompressed. See also cipSecGlobalInOctWraps for the number of times this counter has wrapped.
| |||||||||||||
| CcipSecPhase2GWInOctWraps | 1.3.6.1.4.1.9.9.171.1.3.5.1.4 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of times the global octets received counter (cipSecGlobalInOctets) has wrapped.
| |||||||||||||
| CcipSecPhase2GWInDecompOctets | 1.3.6.1.4.1.9.9.171.1.3.5.1.5 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of decompressed octets received by all current and previous IPsec Phase-2 Tunnels. This value is accumulated AFTER the packet is decompressed. If compression is not being used, this value will match the value of cipSecGlobalInOctets. See also cipSecGlobalInDecompOctWraps for the number of times this counter has wrapped.
| |||||||||||||
| CcipSecPhase2GWInDecompOctWraps | 1.3.6.1.4.1.9.9.171.1.3.5.1.6 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of times the global decompressed octets received counter (cipSecGlobalInDecompOctets) has wrapped.
| |||||||||||||
| CcipSecPhase2GWInPkts | 1.3.6.1.4.1.9.9.171.1.3.5.1.7 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of packets received by all current and previous IPsec Phase-2 Tunnels.
| |||||||||||||
| CcipSecPhase2GWInDrops | 1.3.6.1.4.1.9.9.171.1.3.5.1.8 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of packets dropped during receive processing by all current and previous IPsec Phase-2 Tunnels. This count does NOT include packets dropped due to Anti-Replay processing.
| |||||||||||||
| CcipSecPhase2GWInReplayDrops | 1.3.6.1.4.1.9.9.171.1.3.5.1.9 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of packets dropped during receive processing due to Anti-Replay processing by all current and previous IPsec Phase-2 Tunnels.
| |||||||||||||
| CcipSecPhase2GWInAuths | 1.3.6.1.4.1.9.9.171.1.3.5.1.10 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of inbound authentication's performed by all current and previous IPsec Phase-2 Tunnels.
| |||||||||||||
| CcipSecPhase2GWInAuthFails | 1.3.6.1.4.1.9.9.171.1.3.5.1.11 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of inbound authentication's which ended in failure by all current and previous IPsec Phase-2 Tunnels.
| |||||||||||||
| CcipSecPhase2GWInDecrypts | 1.3.6.1.4.1.9.9.171.1.3.5.1.12 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of inbound decryption's performed by all current and previous IPsec Phase-2 Tunnels.
| |||||||||||||
| CcipSecPhase2GWInDecryptFails | 1.3.6.1.4.1.9.9.171.1.3.5.1.13 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of inbound decryption's which ended in failure by all current and previous IPsec Phase-2 Tunnels.
| |||||||||||||
| CcipSecPhase2GWOutOctets | 1.3.6.1.4.1.9.9.171.1.3.5.1.14 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of octets sent by all current and previous IPsec Phase-2 Tunnels. This value is accumulated AFTER determining whether or not the packet should be compressed. See also cipSecGlobalOutOctWraps for the number of times this counter has wrapped.
| |||||||||||||
| CcipSecPhase2GWOutOctWraps | 1.3.6.1.4.1.9.9.171.1.3.5.1.15 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of times the global octets sent counter (cipSecGlobalOutOctets) has wrapped.
| |||||||||||||
| CcipSecPhase2GWOutUncompOctets | 1.3.6.1.4.1.9.9.171.1.3.5.1.16 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of uncompressed octets sent by all current and previous IPsec Phase-2 Tunnels. This value is accumulated BEFORE the packet is compressed. If compression is not being used, this value will match the value of cipSecGlobalOutOctets. See also cipSecGlobalOutDecompOctWraps for the number of times this counter has wrapped.
| |||||||||||||
| CcipSecPhase2GWOutUncompOctWraps | 1.3.6.1.4.1.9.9.171.1.3.5.1.17 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of times the global uncompressed octets sent counter (cipSecGlobalOutUncompOctets) has wrapped.
| |||||||||||||
| CcipSecPhase2GWOutPkts | 1.3.6.1.4.1.9.9.171.1.3.5.1.18 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of packets sent by all current and previous IPsec Phase-2 Tunnels.
| |||||||||||||
| CcipSecPhase2GWOutDrops | 1.3.6.1.4.1.9.9.171.1.3.5.1.19 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of packets dropped during send processing by all current and previous IPsec Phase-2 Tunnels.
| |||||||||||||
| CcipSecPhase2GWOutAuths | 1.3.6.1.4.1.9.9.171.1.3.5.1.20 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of outbound authentication's performed by all current and previous IPsec Phase-2 Tunnels.
| |||||||||||||
| CcipSecPhase2GWOutAuthFails | 1.3.6.1.4.1.9.9.171.1.3.5.1.21 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of outbound authentication's which ended in failure by all current and previous IPsec Phase-2 Tunnels.
| |||||||||||||
| CcipSecPhase2GWOutEncrypts | 1.3.6.1.4.1.9.9.171.1.3.5.1.22 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of outbound encryption's performed by all current and previous IPsec Phase-2 Tunnels.
| |||||||||||||
| CcipSecPhase2GWOutEncryptFails | 1.3.6.1.4.1.9.9.171.1.3.5.1.23 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of outbound encryption's which ended in failure by all current and previous IPsec Phase-2 Tunnels.
| |||||||||||||
| CcipSecPhase2GWProtocolUseFails | 1.3.6.1.4.1.9.9.171.1.3.5.1.24 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of protocol use failures which occurred during processing of all current and previously active IPsec Phase-2 Tunnels.
| |||||||||||||
| CcipSecPhase2GWNoSaFails | 1.3.6.1.4.1.9.9.171.1.3.5.1.25 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of non-existent Security Association in failures which occurred during processing of all current and previous IPsec Phase-2 Tunnels.
| |||||||||||||
| CcipSecPhase2GWSysCapFails | 1.3.6.1.4.1.9.9.171.1.3.5.1.26 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of system capacity failures which occurred during processing of all current and previously active IPsec Phase-2 Tunnels.
| |||||||||||||
| NcipSecHistory | 1.3.6.1.4.1.9.9.171.1.4 | ||||||||||||
| NcipSecHistGlobal | 1.3.6.1.4.1.9.9.171.1.4.1 | ||||||||||||
| NcipSecHistGlobalCntl | 1.3.6.1.4.1.9.9.171.1.4.1.1 | ||||||||||||
| ScipSecHistTableSize | 1.3.6.1.4.1.9.9.171.1.4.1.1.1 | Integer32 (1..2147483647) | RW | 200 | |||||||||
scalar · Integer32 (1..2147483647) · read-write · current The window size of the IPsec Phase-1 and Phase-2 History Tables. The IPsec Phase-1 and Phase-2 History Tables are implemented as a sliding window in which only the last n entries are maintained. This object is used specify the number of entries which will be maintained in the IPsec Phase-1 and Phase-2 History Tables. An implementation may choose suitable minimum and maximum values for this element based on the local policy and available resources. If an SNMP SET request specifies a value outside this window for this element, a BAD VALUE may be returned. Example values from LibreNMS test devices
| |||||||||||||
| ScipSecHistCheckPoint | 1.3.6.1.4.1.9.9.171.1.4.1.1.2 | INTEGER | RW | ready(1) | |||||||||
scalar · INTEGER · read-write · current The current state of check point processing. This object will return ready when the agent is ready to create on-demand history entries for active IPsec Tunnels or checkPoint when the agent is currently creating on-demand history entries for active IPsec Tunnels. By setting this value to checkPoint, the agent will create: a) an entry in the IPsec Phase-1 Tunnel History for each active IPsec Phase-1 Tunnel and b) an entry in the IPsec Phase-2 Tunnel History Table and an entry in the IPsec Phase-2 Tunnel EndPoint History Table for each active IPsec Phase-2 Tunnel.
Example values from LibreNMS test devices
| |||||||||||||
| NcipSecHistPhaseOne | 1.3.6.1.4.1.9.9.171.1.4.2 | ||||||||||||
| TcikeTunnelHistTable | 1.3.6.1.4.1.9.9.171.1.4.2.1 | NA | |||||||||||
table · not-accessible · current The IPsec Phase-1 Internet Key Exchange Tunnel History Table. This table is implemented as a sliding window in which only the last n entries are maintained. The maximum number of entries is specified by the cipSecHistTableSize object. | |||||||||||||
| RcikeTunnelHistEntry | 1.3.6.1.4.1.9.9.171.1.4.2.1.1 | NA | |||||||||||
row · not-accessible · current Each entry contains the attributes associated with a previously active IPsec Phase-1 IKE Tunnel.
| |||||||||||||
| CcikeTunHistIndex | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The index of the IPsec Phase-1 IKE Tunnel History Table. The value of the index is a number which begins at one and is incremented with each tunnel that ends. The value of this object will wrap at 2,147,483,647. | |||||||||||||
| CcikeTunHistTermReason | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The reason the IPsec Phase-1 IKE Tunnel was terminated. Possible reasons include: 1 = other 2 = normal termination 3 = operator request 4 = peer delete request was received 5 = contact with peer was lost 6 = local failure occurred. 7 = operator initiated check point request
| |||||||||||||
| CcikeTunHistActiveIndex | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.3 | Integer32 (1..2147483647) | RO | ||||||||||
column · Integer32 (1..2147483647) · read-only · current The index of the previously active IPsec Phase-1 IKE Tunnel. | |||||||||||||
| CcikeTunHistPeerLocalType | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.4 | IkePeerType | RO | ||||||||||
column · IkePeerType · read-only · current The type of local peer identity. The local peer may be identified by: 1. an IP address, or 2. a host name. | |||||||||||||
| CcikeTunHistPeerLocalValue | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.5 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The value of the local peer identity. If the local peer type is an IP Address, then this is the IP Address used to identify the local peer. If the local peer type is a host name, then this is the host name used to identify the local peer. | |||||||||||||
| CcikeTunHistPeerIntIndex | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.6 | Integer32 (1..2147483647) | RO | ||||||||||
column · Integer32 (1..2147483647) · read-only · current The internal index of the local-remote peer association. This internal index is used to uniquely identify multiple associations between the local and remote peer. | |||||||||||||
| CcikeTunHistPeerRemoteType | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.7 | IkePeerType | RO | ||||||||||
column · IkePeerType · read-only · current The type of remote peer identity. The remote peer may be identified by: 1. an IP address, or 2. a host name. | |||||||||||||
| CcikeTunHistPeerRemoteValue | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.8 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The value of the remote peer identity. If the remote peer type is an IP Address, then this is the IP Address used to identify the remote peer. If the remote peer type is a host name, then this is the host name used to identify the remote peer. | |||||||||||||
| CcikeTunHistLocalAddr | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.9 | IPSIpAddress | RO | ||||||||||
column · IPSIpAddress · read-only · current The IP address of the local endpoint for the IPsec Phase-1 IKE Tunnel. | |||||||||||||
| CcikeTunHistLocalName | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.10 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The DNS name of the local IP address for the IPsec Phase-1 IKE Tunnel. If the DNS name associated with the local tunnel endpoint is not known, then the value of this object will be a NULL string. | |||||||||||||
| CcikeTunHistRemoteAddr | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.11 | IPSIpAddress | RO | ||||||||||
column · IPSIpAddress · read-only · current The IP address of the remote endpoint for the IPsec Phase-1 IKE Tunnel. | |||||||||||||
| CcikeTunHistRemoteName | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.12 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The DNS name of the remote IP address of IPsec Phase-1 IKE Tunnel. If the DNS name associated with the remote tunnel endpoint is not known, then the value of this object will be a NULL string. | |||||||||||||
| CcikeTunHistNegoMode | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.13 | IkeNegoMode | RO | ||||||||||
column · IkeNegoMode · read-only · current The negotiation mode of the IPsec Phase-1 IKE Tunnel. | |||||||||||||
| CcikeTunHistDiffHellmanGrp | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.14 | DiffHellmanGrp | RO | ||||||||||
column · DiffHellmanGrp · read-only · current The Diffie Hellman Group used in IPsec Phase-1 IKE negotiations. | |||||||||||||
| CcikeTunHistEncryptAlgo | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.15 | EncryptAlgo | RO | ||||||||||
column · EncryptAlgo · read-only · current The encryption algorithm used in IPsec Phase-1 IKE negotiations. | |||||||||||||
| CcikeTunHistHashAlgo | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.16 | IkeHashAlgo | RO | ||||||||||
column · IkeHashAlgo · read-only · current The hash algorithm used in IPsec Phase-1 IKE negotiations. | |||||||||||||
| CcikeTunHistAuthMethod | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.17 | IkeAuthMethod | RO | ||||||||||
column · IkeAuthMethod · read-only · current The authentication method used in IPsec Phase-1 IKE negotiations. | |||||||||||||
| CcikeTunHistLifeTime | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.18 | Integer32 (1..2147483647) | RO | ||||||||||
column · Integer32 (1..2147483647) · read-only · current The negotiated LifeTime of the IPsec Phase-1 IKE Tunnel in seconds. | |||||||||||||
| CcikeTunHistStartTime | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.19 | TimeStamp | RO | ||||||||||
column · TimeStamp · read-only · current The value of sysUpTime in hundredths of seconds when the IPsec Phase-1 IKE tunnel was started. | |||||||||||||
| CcikeTunHistActiveTime | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.20 | TimeInterval | RO | ||||||||||
column · TimeInterval · read-only · current The length of time the IPsec Phase-1 IKE tunnel was been active in hundredths of seconds. | |||||||||||||
| CcikeTunHistTotalRefreshes | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.21 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of security associations refreshes performed.
| |||||||||||||
| CcikeTunHistTotalSas | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.22 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of security associations used during the life of the IPsec Phase-1 IKE Tunnel.
| |||||||||||||
| CcikeTunHistInOctets | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.23 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of octets received by this IPsec Phase-1 IKE Tunnel.
| |||||||||||||
| CcikeTunHistInPkts | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.24 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of packets received by this IPsec Phase-1 IKE Tunnel.
| |||||||||||||
| CcikeTunHistInDropPkts | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.25 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of packets dropped by this IPsec Phase-1 IKE Tunnel during receive processing.
| |||||||||||||
| CcikeTunHistInNotifys | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.26 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of notifys received by this IPsec Phase-1 IKE Tunnel.
| |||||||||||||
| CcikeTunHistInP2Exchgs | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.27 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of IPsec Phase-2 exchanges received by this IPsec Phase-1 IKE Tunnel.
| |||||||||||||
| CcikeTunHistInP2ExchgInvalids | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.28 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of IPsec Phase-2 exchanges received and found to be invalid by this IPsec Phase-1 IKE Tunnel.
| |||||||||||||
| CcikeTunHistInP2ExchgRejects | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.29 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of IPsec Phase-2 exchanges received and rejected by this IPsec Phase-1 IKE Tunnel.
| |||||||||||||
| CcikeTunHistInP2SaDelRequests | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.30 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of IPsec Phase-2 security association delete requests received by this IPsec Phase-1 IKE Tunnel.
| |||||||||||||
| CcikeTunHistOutOctets | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.31 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of octets sent by this IPsec Phase-1 IKE Tunnel.
| |||||||||||||
| CcikeTunHistOutPkts | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.32 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of packets sent by this IPsec Phase-1 IKE Tunnel.
| |||||||||||||
| CcikeTunHistOutDropPkts | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.33 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of packets dropped by this IPsec Phase-1 IKE Tunnel during send processing.
| |||||||||||||
| CcikeTunHistOutNotifys | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.34 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of notifys sent by this IPsec Phase-1 IKE Tunnel.
| |||||||||||||
| CcikeTunHistOutP2Exchgs | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.35 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of IPsec Phase-2 exchanges sent by this IPsec Phase-1 IKE Tunnel.
| |||||||||||||
| CcikeTunHistOutP2ExchgInvalids | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.36 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of IPsec Phase-2 exchanges sent and found to be invalid by this IPsec Phase-1 IKE Tunnel.
| |||||||||||||
| CcikeTunHistOutP2ExchgRejects | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.37 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of IPsec Phase-2 exchanges sent and rejected by this IPsec Phase-1 IKE Tunnel.
| |||||||||||||
| CcikeTunHistOutP2SaDelRequests | 1.3.6.1.4.1.9.9.171.1.4.2.1.1.38 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of IPsec Phase-2 security association delete requests sent by this IPsec Phase-1 IKE Tunnel.
| |||||||||||||
| NcipSecHistPhaseTwo | 1.3.6.1.4.1.9.9.171.1.4.3 | ||||||||||||
| TcipSecTunnelHistTable | 1.3.6.1.4.1.9.9.171.1.4.3.1 | NA | |||||||||||
table · not-accessible · current The IPsec Phase-2 Tunnel History Table. This table is implemented as a sliding window in which only the last n entries are maintained. The maximum number of entries is specified by the cipSecHistTableSize object. | |||||||||||||
| RcipSecTunnelHistEntry | 1.3.6.1.4.1.9.9.171.1.4.3.1.1 | NA | |||||||||||
row · not-accessible · current Each entry contains the attributes associated with a previously active IPsec Phase-2 Tunnel.
| |||||||||||||
| CcipSecTunHistIndex | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The index of the IPsec Phase-2 Tunnel History Table. The value of the index is a number which begins at one and is incremented with each tunnel that ends. The value of this object will wrap at 2,147,483,647. | |||||||||||||
| CcipSecTunHistTermReason | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The reason the IPsec Phase-2 Tunnel was terminated. Possible reasons include: 1 = other 2 = normal termination 3 = operator request 4 = peer delete request was received 5 = contact with peer was lost 6 = local failure occurred 7 = operator initiated check point request
| |||||||||||||
| CcipSecTunHistActiveIndex | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.3 | Integer32 (1..2147483647) | RO | ||||||||||
column · Integer32 (1..2147483647) · read-only · current The index of the previously active IPsec Phase-2 Tunnel. | |||||||||||||
| CcipSecTunHistIkeTunnelIndex | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.4 | Integer32 (1..2147483647) | RO | ||||||||||
column · Integer32 (1..2147483647) · read-only · current The index of the associated IPsec Phase-1 Tunnel (cikeTunIndex in the cikeTunnelTable). | |||||||||||||
| CcipSecTunHistLocalAddr | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.5 | IPSIpAddress | RO | ||||||||||
column · IPSIpAddress · read-only · current The IP address of the local endpoint for the IPsec Phase-2 Tunnel. | |||||||||||||
| CcipSecTunHistRemoteAddr | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.6 | IPSIpAddress | RO | ||||||||||
column · IPSIpAddress · read-only · current The IP address of the remote endpoint for the IPsec Phase-2 Tunnel. | |||||||||||||
| CcipSecTunHistKeyType | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.7 | KeyType | RO | ||||||||||
column · KeyType · read-only · current The type of key used by the IPsec Phase-2 Tunnel. | |||||||||||||
| CcipSecTunHistEncapMode | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.8 | EncapMode | RO | ||||||||||
column · EncapMode · read-only · current The encapsulation mode used by the IPsec Phase-2 Tunnel. | |||||||||||||
| CcipSecTunHistLifeSize | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.9 | Integer32 (1..2147483647) | RO | ||||||||||
column · Integer32 (1..2147483647) · read-only · current The negotiated LifeSize of the IPsec Phase-2 Tunnel in kilobytes.
| |||||||||||||
| CcipSecTunHistLifeTime | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.10 | Integer32 (1..2147483647) | RO | ||||||||||
column · Integer32 (1..2147483647) · read-only · current The negotiated LifeTime of the IPsec Phase-2 Tunnel in seconds.
| |||||||||||||
| CcipSecTunHistStartTime | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.11 | TimeStamp | RO | ||||||||||
column · TimeStamp · read-only · current The value of sysUpTime in hundredths of seconds when the IPsec Phase-2 Tunnel was started. | |||||||||||||
| CcipSecTunHistActiveTime | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.12 | TimeInterval | RO | ||||||||||
column · TimeInterval · read-only · current The length of time the IPsec Phase-2 Tunnel has been active in hundredths of seconds. | |||||||||||||
| CcipSecTunHistTotalRefreshes | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.13 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of security association refreshes performed.
| |||||||||||||
| CcipSecTunHistTotalSas | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.14 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of security associations used during the life of the IPsec Phase-2 Tunnel.
| |||||||||||||
| CcipSecTunHistInSaDiffHellmanGrp | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.15 | DiffHellmanGrp | RO | ||||||||||
column · DiffHellmanGrp · read-only · current The Diffie Hellman Group used by the inbound security association of the IPsec Phase-2 Tunnel. | |||||||||||||
| CcipSecTunHistInSaEncryptAlgo | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.16 | EncryptAlgo | RO | ||||||||||
column · EncryptAlgo · read-only · current The encryption algorithm used by the inbound security association of the IPsec Phase-2 Tunnel. | |||||||||||||
| CcipSecTunHistInSaAhAuthAlgo | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.17 | AuthAlgo | RO | ||||||||||
column · AuthAlgo · read-only · current The authentication algorithm used by the inbound authentication header (AH) security association of the IPsec Phase-2 Tunnel. | |||||||||||||
| CcipSecTunHistInSaEspAuthAlgo | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.18 | AuthAlgo | RO | ||||||||||
column · AuthAlgo · read-only · current The authentication algorithm used by the inbound encapsulation security protocol (ESP) security association of the IPsec Phase-2 Tunnel. | |||||||||||||
| CcipSecTunHistInSaDecompAlgo | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.19 | CompAlgo | RO | ||||||||||
column · CompAlgo · read-only · current The decompression algorithm used by the inbound security association of the IPsec Phase-2 Tunnel. | |||||||||||||
| CcipSecTunHistOutSaDiffHellmanGrp | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.20 | DiffHellmanGrp | RO | ||||||||||
column · DiffHellmanGrp · read-only · current The Diffie Hellman Group used by the outbound security association of the IPsec Phase-2 Tunnel. | |||||||||||||
| CcipSecTunHistOutSaEncryptAlgo | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.21 | EncryptAlgo | RO | ||||||||||
column · EncryptAlgo · read-only · current The encryption algorithm used by the outbound security association of the IPsec Phase-2 Tunnel. | |||||||||||||
| CcipSecTunHistOutSaAhAuthAlgo | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.22 | AuthAlgo | RO | ||||||||||
column · AuthAlgo · read-only · current The authentication algorithm used by the outbound authentication header (AH) security association of the IPsec Phase-2 Tunnel. | |||||||||||||
| CcipSecTunHistOutSaEspAuthAlgo | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.23 | AuthAlgo | RO | ||||||||||
column · AuthAlgo · read-only · current The authentication algorithm used by the inbound encapsulation security protocol (ESP) security association of the IPsec Phase-2 Tunnel. | |||||||||||||
| CcipSecTunHistOutSaCompAlgo | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.24 | CompAlgo | RO | ||||||||||
column · CompAlgo · read-only · current The compression algorithm used by the inbound security association of the IPsec Phase-2 Tunnel. | |||||||||||||
| CcipSecTunHistInOctets | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.25 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of octets received by this IPsec Phase-2 Tunnel. This value is accumulated BEFORE determining whether or not the packet should be decompressed. See also cipSecTunInOctWraps for the number of times this counter has wrapped.
| |||||||||||||
| CcipSecTunHistHcInOctets | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.26 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current A high capacity count of the total number of octets received by this IPsec Phase-2 Tunnel. This value is accumulated BEFORE determining whether or not the packet should be decompressed. | |||||||||||||
| CcipSecTunHistInOctWraps | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.27 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of times the octets received counter (cipSecTunInOctets) has wrapped.
| |||||||||||||
| CcipSecTunHistInDecompOctets | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.28 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of decompressed octets received by this IPsec Phase-2 Tunnel. This value is accumulated AFTER the packet is decompressed. If compression is not being used, this value will match the value of cipSecTunHistInOctets. See also cipSecTunInDecompOctWraps for the number of times this counter has wrapped.
| |||||||||||||
| CcipSecTunHistHcInDecompOctets | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.29 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current A high capacity count of the total number of decompressed octets received by this IPsec Phase-2 Tunnel. This value is accumulated AFTER the packet is decompressed. If compression is not being used, this value will match the value of cipSecTunHistHcInOctets. | |||||||||||||
| CcipSecTunHistInDecompOctWraps | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.30 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of times the decompressed octets received counter (cipSecTunInDecompOctets) has wrapped.
| |||||||||||||
| CcipSecTunHistInPkts | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.31 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of packets received by this IPsec Phase-2 Tunnel.
| |||||||||||||
| CcipSecTunHistInDropPkts | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.32 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of packets dropped during receive processing by this IPsec Phase-2 Tunnel. This count does NOT include packets dropped due to Anti-Replay processing.
| |||||||||||||
| CcipSecTunHistInReplayDropPkts | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.33 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of packets dropped during receive processing due to Anti-Replay processing by this IPsec Phase-2 Tunnel.
| |||||||||||||
| CcipSecTunHistInAuths | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.34 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of inbound authentication's performed by this IPsec Phase-2 Tunnel.
| |||||||||||||
| CcipSecTunHistInAuthFails | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.35 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of inbound authentication's which ended in failure by this IPsec Phase-2 Tunnel .
| |||||||||||||
| CcipSecTunHistInDecrypts | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.36 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of inbound decryption's performed by this IPsec Phase-2 Tunnel.
| |||||||||||||
| CcipSecTunHistInDecryptFails | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.37 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of inbound decryption's which ended in failure by this IPsec Phase-2 Tunnel.
| |||||||||||||
| CcipSecTunHistOutOctets | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.38 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of octets sent by this IPsec Phase-2 Tunnel. This value is accumulated AFTER determining whether or not the packet should be compressed. See also cipSecTunOutOctWraps for the number of times this counter has wrapped.
| |||||||||||||
| CcipSecTunHistHcOutOctets | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.39 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current A high capacity count of the total number of octets sent by this IPsec Phase-2 Tunnel. This value is accumulated AFTER determining whether or not the packet should be compressed. | |||||||||||||
| CcipSecTunHistOutOctWraps | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.40 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of times the octets sent counter (cipSecTunOutOctets) has wrapped.
| |||||||||||||
| CcipSecTunHistOutUncompOctets | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.41 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of uncompressed octets sent by this IPsec Phase-2 Tunnel. This value is accumulated BEFORE the packet is compressed. If compression is not being used, this value will match the value of cipSecTunHistOutOctets. See also cipSecTunOutDecompOctWraps for the number of times this counter has wrapped.
| |||||||||||||
| CcipSecTunHistHcOutUncompOctets | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.42 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current A high capacity count of the total number of uncompressed octets sent by this IPsec Phase-2 Tunnel. This value is accumulated BEFORE the packet is compressed. If compression is not being used, this value will match the value of cipSecTunHistHcOutOctets.
| |||||||||||||
| CcipSecTunHistOutUncompOctWraps | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.43 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of times the uncompressed octets sent counter (cipSecTunOutUncompOctets) has wrapped.
| |||||||||||||
| CcipSecTunHistOutPkts | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.44 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of packets sent by this IPsec Phase-2 Tunnel.
| |||||||||||||
| CcipSecTunHistOutDropPkts | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.45 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of packets dropped during send processing by this IPsec Phase-2 Tunnel.
| |||||||||||||
| CcipSecTunHistOutAuths | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.46 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of outbound authentication's performed by this IPsec Phase-2 Tunnel.
| |||||||||||||
| CcipSecTunHistOutAuthFails | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.47 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of outbound authentication's which ended in failure by this IPsec Phase-2 Tunnel.
| |||||||||||||
| CcipSecTunHistOutEncrypts | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.48 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of outbound encryption's performed by this IPsec Phase-2 Tunnel.
| |||||||||||||
| CcipSecTunHistOutEncryptFails | 1.3.6.1.4.1.9.9.171.1.4.3.1.1.49 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of outbound encryption's which ended in failure by this IPsec Phase-2 Tunnel.
| |||||||||||||
| TcipSecEndPtHistTable | 1.3.6.1.4.1.9.9.171.1.4.3.2 | NA | |||||||||||
table · not-accessible · current The IPsec Phase-2 Tunnel Endpoint History Table. This table is implemented as a sliding window in which only the last n entries are maintained. The maximum number of entries is specified by the cipSecHistTableSize object. | |||||||||||||
| RcipSecEndPtHistEntry | 1.3.6.1.4.1.9.9.171.1.4.3.2.1 | NA | |||||||||||
row · not-accessible · current Each entry contains the attributes associated with a previously active IPsec Phase-2 Tunnel Endpoint.
| |||||||||||||
| CcipSecEndPtHistIndex | 1.3.6.1.4.1.9.9.171.1.4.3.2.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The number of the previously active Endpoint associated with a IPsec Phase-2 Tunnel Table. The value of this index is a number which begins at one and is incremented with each Endpoint associated with an IPsec Phase-2 Tunnel. The value of this object will wrap at 2,147,483,647. | |||||||||||||
| CcipSecEndPtHistTunIndex | 1.3.6.1.4.1.9.9.171.1.4.3.2.1.2 | Integer32 (1..2147483647) | RO | ||||||||||
column · Integer32 (1..2147483647) · read-only · current The index of the previously active IPsec Phase-2 Tunnel Table. | |||||||||||||
| CcipSecEndPtHistActiveIndex | 1.3.6.1.4.1.9.9.171.1.4.3.2.1.3 | Integer32 (1..2147483647) | RO | ||||||||||
column · Integer32 (1..2147483647) · read-only · current The index of the previously active Endpoint. | |||||||||||||
| CcipSecEndPtHistLocalName | 1.3.6.1.4.1.9.9.171.1.4.3.2.1.4 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The DNS name of the local Endpoint. | |||||||||||||
| CcipSecEndPtHistLocalType | 1.3.6.1.4.1.9.9.171.1.4.3.2.1.5 | EndPtType | RO | ||||||||||
column · EndPtType · read-only · current The type of identity for the local Endpoint. Possible values are: 1) a single IP address, or 2) an IP address range, or 3) an IP subnet. | |||||||||||||
| CcipSecEndPtHistLocalAddr1 | 1.3.6.1.4.1.9.9.171.1.4.3.2.1.6 | IPSIpAddress | RO | ||||||||||
column · IPSIpAddress · read-only · current The local Endpoint's first IP address specification. If the local Endpoint type is single IP address, then this is the value of the IP address. If the local Endpoint type is IP subnet, then this is the value of the subnet. If the local Endpoint type is IP address range, then this is the value of beginning IP address of the range. | |||||||||||||
| CcipSecEndPtHistLocalAddr2 | 1.3.6.1.4.1.9.9.171.1.4.3.2.1.7 | IPSIpAddress | RO | ||||||||||
column · IPSIpAddress · read-only · current The local Endpoint's second IP address specification. If the local Endpoint type is single IP address, then this is the value of the IP address. If the local Endpoint type is IP subnet, then this is the value of the subnet mask. If the local Endpoint type is IP address range, then this is the value of ending IP address of the range. | |||||||||||||
| CcipSecEndPtHistLocalProtocol | 1.3.6.1.4.1.9.9.171.1.4.3.2.1.8 | Integer32 (0..255) | RO | ||||||||||
column · Integer32 (0..255) · read-only · current The protocol number of the local Endpoint's traffic. | |||||||||||||
| CcipSecEndPtHistLocalPort | 1.3.6.1.4.1.9.9.171.1.4.3.2.1.9 | Integer32 (0..65535) | RO | ||||||||||
column · Integer32 (0..65535) · read-only · current The port number of the local Endpoint's traffic. | |||||||||||||
| CcipSecEndPtHistRemoteName | 1.3.6.1.4.1.9.9.171.1.4.3.2.1.10 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The DNS name of the remote Endpoint. | |||||||||||||
| CcipSecEndPtHistRemoteType | 1.3.6.1.4.1.9.9.171.1.4.3.2.1.11 | EndPtType | RO | ||||||||||
column · EndPtType · read-only · current The type of identity for the remote Endpoint. Possible values are: 1) a single IP address, or 2) an IP address range, or 3) an IP subnet. | |||||||||||||
| CcipSecEndPtHistRemoteAddr1 | 1.3.6.1.4.1.9.9.171.1.4.3.2.1.12 | IPSIpAddress | RO | ||||||||||
column · IPSIpAddress · read-only · current The remote Endpoint's first IP address specification. If the remote Endpoint type is single IP address, then this is the value of the IP address. If the remote Endpoint type is IP subnet, then this is the value of the subnet. If the remote Endpoint type is IP address range, then this is the value of beginning IP address of the range. | |||||||||||||
| CcipSecEndPtHistRemoteAddr2 | 1.3.6.1.4.1.9.9.171.1.4.3.2.1.13 | IPSIpAddress | RO | ||||||||||
column · IPSIpAddress · read-only · current The remote Endpoint's second IP address specification. If the remote Endpoint type is single IP address, then this is the value of the IP address. If the remote Endpoint type is IP subnet, then this is the value of the subnet mask. If the remote Endpoint type is IP address range, then this is the value of ending IP address of the range. | |||||||||||||
| CcipSecEndPtHistRemoteProtocol | 1.3.6.1.4.1.9.9.171.1.4.3.2.1.14 | Integer32 (0..255) | RO | ||||||||||
column · Integer32 (0..255) · read-only · current The protocol number of the remote Endpoint's traffic. | |||||||||||||
| CcipSecEndPtHistRemotePort | 1.3.6.1.4.1.9.9.171.1.4.3.2.1.15 | Integer32 (0..65535) | RO | ||||||||||
column · Integer32 (0..65535) · read-only · current The port number of the remote Endpoint's traffic. | |||||||||||||
| NcipSecFailures | 1.3.6.1.4.1.9.9.171.1.5 | ||||||||||||
| NcipSecFailGlobal | 1.3.6.1.4.1.9.9.171.1.5.1 | ||||||||||||
| NcipSecFailGlobalCntl | 1.3.6.1.4.1.9.9.171.1.5.1.1 | ||||||||||||
| ScipSecFailTableSize | 1.3.6.1.4.1.9.9.171.1.5.1.1.1 | Integer32 (1..2147483647) | RW | 200 | |||||||||
scalar · Integer32 (1..2147483647) · read-write · current The window size of the IPsec Phase-1 and Phase-2 Failure Tables. The IPsec Phase-1 and Phase-2 Failure Tables are implemented as a sliding window in which only the last n entries are maintained. This object is used specify the number of entries which will be maintained in the IPsec Phase-1 and Phase-2 Failure Tables. An implementation may choose suitable minimum and maximum values for this element based on the local policy and available resources. If an SNMP SET request specifies a value outside this window for this element, a BAD VALUE may be returned. Example values from LibreNMS test devices
| |||||||||||||
| NcipSecFailPhaseOne | 1.3.6.1.4.1.9.9.171.1.5.2 | ||||||||||||
| TcikeFailTable | 1.3.6.1.4.1.9.9.171.1.5.2.1 | NA | |||||||||||
table · not-accessible · current The IPsec Phase-1 Failure Table. This table is implemented as a sliding window in which only the last n entries are maintained. The maximum number of entries is specified by the cipSecFailTableSize object. | |||||||||||||
| RcikeFailEntry | 1.3.6.1.4.1.9.9.171.1.5.2.1.1 | NA | |||||||||||
row · not-accessible · current Each entry contains the attributes associated with an IPsec Phase-1 failure.
| |||||||||||||
| CcikeFailIndex | 1.3.6.1.4.1.9.9.171.1.5.2.1.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The IPsec Phase-1 Failure Table index. The value of the index is a number which begins at one and is incremented with each IPsec Phase-1 failure. The value of this object will wrap at 2,147,483,647. | |||||||||||||
| CcikeFailReason | 1.3.6.1.4.1.9.9.171.1.5.2.1.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The reason for the failure. Possible reasons include: 1 = other 2 = peer delete request was received 3 = contact with peer was lost 4 = local failure occurred 5 = authentication failure 6 = hash validation failure 7 = encryption failure 8 = internal error occurred 9 = system capacity failure 10 = proposal failure 11 = peer's certificate is unavailable 12 = peer's certificate was found invalid 13 = local certificate expired 14 = certificate revoke list (crl) failure 15 = peer encoding error 16 = non-existent security association 17 = operator requested termination.
| |||||||||||||
| CcikeFailTime | 1.3.6.1.4.1.9.9.171.1.5.2.1.1.3 | TimeStamp | RO | ||||||||||
column · TimeStamp · read-only · current The value of sysUpTime in hundredths of seconds at the time of the failure. | |||||||||||||
| CcikeFailLocalType | 1.3.6.1.4.1.9.9.171.1.5.2.1.1.4 | IkePeerType | RO | ||||||||||
column · IkePeerType · read-only · current The type of local peer identity. The local peer may be identified by: 1. an IP address, or 2. a host name. | |||||||||||||
| CcikeFailLocalValue | 1.3.6.1.4.1.9.9.171.1.5.2.1.1.5 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The value of the local peer identity. If the local peer type is an IP Address, then this is the IP Address used to identify the local peer. If the local peer type is a host name, then this is the host name used to identify the local peer. | |||||||||||||
| CcikeFailRemoteType | 1.3.6.1.4.1.9.9.171.1.5.2.1.1.6 | IkePeerType | RO | ||||||||||
column · IkePeerType · read-only · current The type of remote peer identity. The remote peer may be identified by: 1. an IP address, or 2. a host name. | |||||||||||||
| CcikeFailRemoteValue | 1.3.6.1.4.1.9.9.171.1.5.2.1.1.7 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The value of the remote peer identity. If the remote peer type is an IP Address, then this is the IP Address used to identify the remote peer. If the remote peer type is a host name, then this is the host name used to identify the remote peer. | |||||||||||||
| CcikeFailLocalAddr | 1.3.6.1.4.1.9.9.171.1.5.2.1.1.8 | IPSIpAddress | RO | ||||||||||
column · IPSIpAddress · read-only · current The IP address of the local peer. | |||||||||||||
| CcikeFailRemoteAddr | 1.3.6.1.4.1.9.9.171.1.5.2.1.1.9 | IPSIpAddress | RO | ||||||||||
column · IPSIpAddress · read-only · current The IP address of the remote peer. | |||||||||||||
| NcipSecFailPhaseTwo | 1.3.6.1.4.1.9.9.171.1.5.3 | ||||||||||||
| TcipSecFailTable | 1.3.6.1.4.1.9.9.171.1.5.3.1 | NA | |||||||||||
table · not-accessible · current The IPsec Phase-2 Failure Table. This table is implemented as a sliding window in which only the last n entries are maintained. The maximum number of entries is specified by the cipSecFailTableSize object. | |||||||||||||
| RcipSecFailEntry | 1.3.6.1.4.1.9.9.171.1.5.3.1.1 | NA | |||||||||||
row · not-accessible · current Each entry contains the attributes associated with an IPsec Phase-1 failure.
| |||||||||||||
| CcipSecFailIndex | 1.3.6.1.4.1.9.9.171.1.5.3.1.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The IPsec Phase-2 Failure Table index. The value of the index is a number which begins at one and is incremented with each IPsec Phase-1 failure. The value of this object will wrap at 2,147,483,647. | |||||||||||||
| CcipSecFailReason | 1.3.6.1.4.1.9.9.171.1.5.3.1.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The reason for the failure. Possible reasons include: 1 = other 2 = internal error occurred 3 = peer encoding error 4 = proposal failure 5 = protocol use failure 6 = non-existent security association 7 = decryption failure 8 = encryption failure 9 = inbound authentication failure 10 = outbound authentication failure 11 = compression failure 12 = system capacity failure 13 = peer delete request was received 14 = contact with peer was lost 15 = sequence number rolled over 16 = operator requested termination.
| |||||||||||||
| CcipSecFailTime | 1.3.6.1.4.1.9.9.171.1.5.3.1.1.3 | TimeStamp | RO | ||||||||||
column · TimeStamp · read-only · current The value of sysUpTime in hundredths of seconds at the time of the failure. | |||||||||||||
| CcipSecFailTunnelIndex | 1.3.6.1.4.1.9.9.171.1.5.3.1.1.4 | Integer32 (1..2147483647) | RO | ||||||||||
column · Integer32 (1..2147483647) · read-only · current The Phase-2 Tunnel index (cipSecTunIndex). | |||||||||||||
| CcipSecFailSaSpi | 1.3.6.1.4.1.9.9.171.1.5.3.1.1.5 | Integer32 (0..2147483647) | RO | ||||||||||
column · Integer32 (0..2147483647) · read-only · current The security association SPI value. | |||||||||||||
| CcipSecFailPktSrcAddr | 1.3.6.1.4.1.9.9.171.1.5.3.1.1.6 | IPSIpAddress | RO | ||||||||||
column · IPSIpAddress · read-only · current The packet's source IP address. | |||||||||||||
| CcipSecFailPktDstAddr | 1.3.6.1.4.1.9.9.171.1.5.3.1.1.7 | IPSIpAddress | RO | ||||||||||
column · IPSIpAddress · read-only · current The packet's destination IP address. | |||||||||||||
| NcipSecTrapCntl | 1.3.6.1.4.1.9.9.171.1.6 | ||||||||||||
| ScipSecTrapCntlIkeTunnelStart | 1.3.6.1.4.1.9.9.171.1.6.1 | TrapStatus | RW | 2 | |||||||||
scalar · TrapStatus · read-write · current This object defines the administrative state of sending the IPsec IKE Phase-1 Tunnel Start TRAP Example values from LibreNMS test devices
| |||||||||||||
| ScipSecTrapCntlIkeTunnelStop | 1.3.6.1.4.1.9.9.171.1.6.2 | TrapStatus | RW | 2 | |||||||||
scalar · TrapStatus · read-write · current This object defines the administrative state of sending the IPsec IKE Phase-1 Tunnel Stop TRAP Example values from LibreNMS test devices
| |||||||||||||
| ScipSecTrapCntlIkeSysFailure | 1.3.6.1.4.1.9.9.171.1.6.3 | TrapStatus | RW | 2 | |||||||||
scalar · TrapStatus · read-write · current This object defines the administrative state of sending the IPsec IKE Phase-1 System Failure TRAP Example values from LibreNMS test devices
| |||||||||||||
| ScipSecTrapCntlIkeCertCrlFailure | 1.3.6.1.4.1.9.9.171.1.6.4 | TrapStatus | RW | 2 | |||||||||
scalar · TrapStatus · read-write · current This object defines the administrative state of sending the IPsec IKE Phase-1 Certificate/CRL Failure TRAP Example values from LibreNMS test devices
| |||||||||||||
| ScipSecTrapCntlIkeProtocolFail | 1.3.6.1.4.1.9.9.171.1.6.5 | TrapStatus | RW | 2 | |||||||||
scalar · TrapStatus · read-write · current This object defines the administrative state of sending the IPsec IKE Phase-1 Protocol Failure TRAP Example values from LibreNMS test devices
| |||||||||||||
| ScipSecTrapCntlIkeNoSa | 1.3.6.1.4.1.9.9.171.1.6.6 | TrapStatus | RW | 2 | |||||||||
scalar · TrapStatus · read-write · current This object defines the administrative state of sending the IPsec IKE Phase-1 No Security Association TRAP Example values from LibreNMS test devices
| |||||||||||||
| ScipSecTrapCntlIpSecTunnelStart | 1.3.6.1.4.1.9.9.171.1.6.7 | TrapStatus | RW | 2 | |||||||||
scalar · TrapStatus · read-write · current This object defines the administrative state of sending the IPsec Phase-2 Tunnel Start TRAP Example values from LibreNMS test devices
| |||||||||||||
| ScipSecTrapCntlIpSecTunnelStop | 1.3.6.1.4.1.9.9.171.1.6.8 | TrapStatus | RW | 2 | |||||||||
scalar · TrapStatus · read-write · current This object defines the administrative state of sending the IPsec Phase-2 Tunnel Stop TRAP Example values from LibreNMS test devices
| |||||||||||||
| ScipSecTrapCntlIpSecSysFailure | 1.3.6.1.4.1.9.9.171.1.6.9 | TrapStatus | RW | 2 | |||||||||
scalar · TrapStatus · read-write · current This object defines the administrative state of sending the IPsec Phase-2 System Failure TRAP Example values from LibreNMS test devices
| |||||||||||||
| ScipSecTrapCntlIpSecSetUpFailure | 1.3.6.1.4.1.9.9.171.1.6.10 | TrapStatus | RW | 2 | |||||||||
scalar · TrapStatus · read-write · current This object defines the administrative state of sending the IPsec Phase-2 Set Up Failure TRAP Example values from LibreNMS test devices
| |||||||||||||
| ScipSecTrapCntlIpSecEarlyTunTerm | 1.3.6.1.4.1.9.9.171.1.6.11 | TrapStatus | RW | 2 | |||||||||
scalar · TrapStatus · read-write · current This object defines the administrative state of sending the IPsec Phase-2 Early Tunnel Termination TRAP Example values from LibreNMS test devices
| |||||||||||||
| ScipSecTrapCntlIpSecProtocolFail | 1.3.6.1.4.1.9.9.171.1.6.12 | TrapStatus | RW | 2 | |||||||||
scalar · TrapStatus · read-write · current This object defines the administrative state of sending the IPsec Phase-2 Protocol Failure TRAP Example values from LibreNMS test devices
| |||||||||||||
| ScipSecTrapCntlIpSecNoSa | 1.3.6.1.4.1.9.9.171.1.6.13 | TrapStatus | RW | 2 | |||||||||
scalar · TrapStatus · read-write · current This object defines the administrative state of sending the IPsec Phase-2 No Security Association TRAP Example values from LibreNMS test devices
| |||||||||||||
| NcipSecMIBNotificationPrefix | 1.3.6.1.4.1.9.9.171.2 | ||||||||||||
| NcipSecMIBNotifications | 1.3.6.1.4.1.9.9.171.2.0 | ||||||||||||
| !cikeTunnelStart | 1.3.6.1.4.1.9.9.171.2.0.1 | ||||||||||||
notification · current This notification is generated when an IPsec Phase-1 IKE Tunnel becomes active. | |||||||||||||
| !cikeTunnelStop | 1.3.6.1.4.1.9.9.171.2.0.2 | ||||||||||||
notification · current This notification is generated when an IPsec Phase-1 IKE Tunnel becomes inactive. | |||||||||||||
| !cikeSysFailure | 1.3.6.1.4.1.9.9.171.2.0.3 | ||||||||||||
notification · current This notification is generated when the processing for an IPsec Phase-1 IKE Tunnel experiences an internal or system capacity error.
| |||||||||||||
| !cikeCertCrlFailure | 1.3.6.1.4.1.9.9.171.2.0.4 | ||||||||||||
notification · current This notification is generated when the processing for an IPsec Phase-1 IKE Tunnel experiences a Certificate or a Certificate Revoke List (CRL) related error.
| |||||||||||||
| !cikeProtocolFailure | 1.3.6.1.4.1.9.9.171.2.0.5 | ||||||||||||
notification · current This notification is generated when the processing for an IPsec Phase-1 IKE Tunnel experiences a protocol related error.
| |||||||||||||
| !cikeNoSa | 1.3.6.1.4.1.9.9.171.2.0.6 | ||||||||||||
notification · current This notification is generated when the processing for an IPsec Phase-1 IKE Tunnel experiences a non-existent security association error.
| |||||||||||||
| !cipSecTunnelStart | 1.3.6.1.4.1.9.9.171.2.0.7 | ||||||||||||
notification · current This notification is generated when an IPsec Phase-2 Tunnel becomes active.
| |||||||||||||
| !cipSecTunnelStop | 1.3.6.1.4.1.9.9.171.2.0.8 | ||||||||||||
notification · current This notification is generated when an IPsec Phase-2 Tunnel becomes inactive.
| |||||||||||||
| !cipSecSysFailure | 1.3.6.1.4.1.9.9.171.2.0.9 | ||||||||||||
notification · current This notification is generated when the processing for an IPsec Phase-2 Tunnel experiences an internal or system capacity error. | |||||||||||||
| !cipSecSetUpFailure | 1.3.6.1.4.1.9.9.171.2.0.10 | ||||||||||||
notification · current This notification is generated when the setup for an IPsec Phase-2 Tunnel fails.
| |||||||||||||
| !cipSecEarlyTunTerm | 1.3.6.1.4.1.9.9.171.2.0.11 | ||||||||||||
notification · current This notification is generated when an an IPsec Phase-2 Tunnel is terminated earily or before expected.
| |||||||||||||
| !cipSecProtocolFailure | 1.3.6.1.4.1.9.9.171.2.0.12 | ||||||||||||
notification · current This notification is generated when the processing for an IPsec Phase-2 Tunnel experiences a protocol related error.
| |||||||||||||
| !cipSecNoSa | 1.3.6.1.4.1.9.9.171.2.0.13 | ||||||||||||
notification · current This notification is generated when the processing for an IPsec Phase-2 Tunnel experiences a non-existent security association error. | |||||||||||||
| NcipSecMIBConformance | 1.3.6.1.4.1.9.9.171.3 | ||||||||||||
| NcipSecMIBGroups | 1.3.6.1.4.1.9.9.171.3.1 | ||||||||||||
| GcipSecLevelsGroup | 1.3.6.1.4.1.9.9.171.3.1.1 | ||||||||||||
| GcipSecPhaseOneGroup | 1.3.6.1.4.1.9.9.171.3.1.2 | ||||||||||||
group · current This group consists of: 1) IPsec Phase-1 Global Objects 2) IPsec Phase-1 Peer Table 3) IPsec Phase-1 Tunnel Table 4) IPsec Phase-1 Correlation Table
| |||||||||||||
| GcipSecPhaseTwoGroup | 1.3.6.1.4.1.9.9.171.3.1.3 | ||||||||||||
group · current This group consists of: 1) IPsec Phase-2 Global Statistics 2) IPsec Phase-2 Tunnel Table 3) IPsec Phase-2 Endpoint Table 4) IPsec Phase-2 Security Protection Index Table
| |||||||||||||
| GcipSecHistoryGroup | 1.3.6.1.4.1.9.9.171.3.1.4 | ||||||||||||
group · current This group consists of: 1) IPsec History Global Objects 2) IPsec Phase-1 History Objects 3) IPsec Phase-2 History Objects
| |||||||||||||
| GcipSecFailuresGroup | 1.3.6.1.4.1.9.9.171.3.1.5 | ||||||||||||
group · current This group consists of: 1) IPsec Failure Global Objects 2) IPsec Phase-1 Tunnel Failure Table 3) IPsec Phase-2 Tunnel Failure Table | |||||||||||||
| GcipSecTrapCntlGroup | 1.3.6.1.4.1.9.9.171.3.1.6 | ||||||||||||
group · current This group of objects controls the sending of IPsec TRAPs.
| |||||||||||||
| GcipSecNotificationGroup | 1.3.6.1.4.1.9.9.171.3.1.7 | ||||||||||||
group · current This group contains the notifications for the IPsec MIB. | |||||||||||||
| GcipSecGWStatsGroup | 1.3.6.1.4.1.9.9.171.3.1.8 | ||||||||||||
group · current
| |||||||||||||
| NcipSecMIBCompliances | 1.3.6.1.4.1.9.9.171.3.2 | ||||||||||||
| McipSecMIBCompliance | 1.3.6.1.4.1.9.9.171.3.2.1 | deprecated | |||||||||||
compliance · deprecated The compliance statement for SNMP entities the IP Security Protocol. This has been replaced by cipSecMIBComplianceRev1. | |||||||||||||
| McipSecMIBComplianceRev1 | 1.3.6.1.4.1.9.9.171.3.2.2 | ||||||||||||
compliance · current The compliance statement for SNMP entities the IP Security Protocol. | |||||||||||||
Textual conventions
AuthAlgoINTEGERhmacMd5(2)hmacSha(3)none(1)The authentication algorithm used by a security association of an IPsec Phase-2 Tunnel.
CompAlgoINTEGERldf(2)none(1)The compression algorithm used by a security association of an IPsec Phase-2 Tunnel.
DiffHellmanGrpINTEGERdhGroup1(2)dhGroup2(3)none(1)The Diffie Hellman Group used in negotiations.
EncapModeINTEGERtransport(2)tunnel(1)The encapsulation mode used by an IPsec Phase-2 Tunnel.
EncryptAlgoINTEGERdes(2)des3(3)none(1)The encryption algorithm used in negotiations.
EndPtTypeINTEGERipAddrRange(2)ipSubnet(3)singleIpAddr(1)The type of identity use to specify an IPsec End Point.
IPSIpAddressOCTET STRING (SIZE (4 | 16))An IP V4 or V6 Address.
IkeAuthMethodINTEGERnone(1)preSharedKey(2)revPublicKey(5)rsaEncrypt(4)rsaSig(3)The authentication method used in IPsec Phase-1 IKE negotiations.
IkeHashAlgoINTEGERmd5(2)none(1)sha(3)The hash algorithm used in IPsec Phase-1 IKE negotiations.
IkeNegoModeINTEGERaggressive(2)main(1)The IPsec Phase-1 IKE negotiation mode.
IkePeerTypeINTEGERipAddrPeer(1)namePeer(2)The type of IPsec Phase-1 IKE peer identity. The IKE peer may be identified by: 1. an IP address, or 2. a host name.
KeyTypeINTEGERike(1)manual(2)The type of key used by an IPsec Phase-2 Tunnel.
TrapStatusINTEGERdisabled(2)enabled(1)The administrative status for sending a TRAP.
TunnelStatusINTEGERactive(1)destroy(2)The status of a Tunnel. Objects of this type may be used to bring the tunnel down by setting value of this object to destroy(2). Objects of this type cannot be used to create a Tunnel.
Traps / Notifications
- cikeCertCrlFailure
1.3.6.1.4.1.9.9.171.2.0.4 - cikeNoSa
1.3.6.1.4.1.9.9.171.2.0.6 - cikeProtocolFailure
1.3.6.1.4.1.9.9.171.2.0.5 - cikeSysFailure
1.3.6.1.4.1.9.9.171.2.0.3 - cikeTunnelStart
1.3.6.1.4.1.9.9.171.2.0.1 - cikeTunnelStop
1.3.6.1.4.1.9.9.171.2.0.2 - cipSecEarlyTunTerm
1.3.6.1.4.1.9.9.171.2.0.11 - cipSecNoSa
1.3.6.1.4.1.9.9.171.2.0.13 - cipSecProtocolFailure
1.3.6.1.4.1.9.9.171.2.0.12 - cipSecSetUpFailure
1.3.6.1.4.1.9.9.171.2.0.10 - cipSecSysFailure
1.3.6.1.4.1.9.9.171.2.0.9 - cipSecTunnelStart
1.3.6.1.4.1.9.9.171.2.0.7 - cipSecTunnelStop
1.3.6.1.4.1.9.9.171.2.0.8