MIB Browser

CISCO-IP-URPF-MIB

ciscoSystems
Unicast Reverse Path Forwarding (URPF) is a function that
checks the validity of the source address of IP packets
received on an interface. This in an attempt to prevent
Denial of Service attacks based on IP address spoofing.

URPF checks validity of a source address by determining
whether the packet would be successfully routed as a
destination address.
Based on configuration, the check made
can be for existence of any route for the address, or more
strictly for a route out the interface on which the packet
was received by the device. When a violating packet is
detected, it can be dropped.
This MIB allows detection of
spoofingevents.
Organization
Cisco System, Inc.
Root OID
1.3.6.1.4.1.9.9.451
Last updated
Objects
45
Source
Show full MIB
snmptranslate -m CISCO-IP-URPF-MIB -Tp
snmpwalk -v2c -c <community> -m CISCO-IP-URPF-MIB <host> 1.3.6.1.4.1.9.9.451

Imports

CISCO-SMIciscoMgmt
IF-MIBifIndex
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIBits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION, TimeStamp, TruthValue

OID tree

NameOIDTypeAccessStatusExample
IciscoIpUrpfMIB1.3.6.1.4.1.9.9.451
NciscoIpUrpfMIBNotifs1.3.6.1.4.1.9.9.451.0
!cipUrpfIfDropRateNotify1.3.6.1.4.1.9.9.451.0.1
NciscoIpUrpfMIBObjects1.3.6.1.4.1.9.9.451.1
NcipUrpfScalar1.3.6.1.4.1.9.9.451.1.1
ScipUrpfDropRateWindow1.3.6.1.4.1.9.9.451.1.1.1Integer32 (1..600)RW300
ScipUrpfComputeInterval1.3.6.1.4.1.9.9.451.1.1.2Integer32 (1..120)RW30
ScipUrpfDropNotifyHoldDownTime1.3.6.1.4.1.9.9.451.1.1.3Integer32 (1..1000)RW300
NcipUrpfStatistics1.3.6.1.4.1.9.9.451.1.2
TcipUrpfTable1.3.6.1.4.1.9.9.451.1.2.1NA
RcipUrpfEntry1.3.6.1.4.1.9.9.451.1.2.1.1NA
CcipUrpfIpVersion1.3.6.1.4.1.9.9.451.1.2.1.1.1INTEGERNA
CcipUrpfDrops1.3.6.1.4.1.9.9.451.1.2.1.1.2Counter32RO0
CcipUrpfDropRate1.3.6.1.4.1.9.9.451.1.2.1.1.3Gauge32RO0
TcipUrpfIfMonTable1.3.6.1.4.1.9.9.451.1.2.2NA
RcipUrpfIfMonEntry1.3.6.1.4.1.9.9.451.1.2.2.1NA
CcipUrpfIfIpVersion1.3.6.1.4.1.9.9.451.1.2.2.1.1INTEGERNA
CcipUrpfIfDrops1.3.6.1.4.1.9.9.451.1.2.2.1.2Counter32RO
CcipUrpfIfSuppressedDrops1.3.6.1.4.1.9.9.451.1.2.2.1.3Counter32RO
CcipUrpfIfDropRate1.3.6.1.4.1.9.9.451.1.2.2.1.4Gauge32RO
CcipUrpfIfDiscontinuityTime1.3.6.1.4.1.9.9.451.1.2.2.1.5TimeStampRO
TcipUrpfVrfIfTable1.3.6.1.4.1.9.9.451.1.2.3NA
RcipUrpfVrfIfEntry1.3.6.1.4.1.9.9.451.1.2.3.1NA
CcipUrpfVrfIfDrops1.3.6.1.4.1.9.9.451.1.2.3.1.2Counter32RO
CcipUrpfVrfIfDiscontinuityTime1.3.6.1.4.1.9.9.451.1.2.3.1.3TimeStampRO
NcipUrpfInterfaceConfig1.3.6.1.4.1.9.9.451.1.3
TcipUrpfIfConfTable1.3.6.1.4.1.9.9.451.1.3.1NA
RcipUrpfIfConfEntry1.3.6.1.4.1.9.9.451.1.3.1.1NA
CcipUrpfIfDropRateNotifyEnable1.3.6.1.4.1.9.9.451.1.3.1.1.1TruthValueRW
CcipUrpfIfNotifyDropRateThreshold1.3.6.1.4.1.9.9.451.1.3.1.1.2Unsigned32RW
CcipUrpfIfNotifyDrHoldDownReset1.3.6.1.4.1.9.9.451.1.3.1.1.3TruthValueRW
CcipUrpfIfCheckStrict1.3.6.1.4.1.9.9.451.1.3.1.1.4INTEGERRO
CcipUrpfIfWhichRouteTableID1.3.6.1.4.1.9.9.451.1.3.1.1.5INTEGERRO
CcipUrpfIfVrfName1.3.6.1.4.1.9.9.451.1.3.1.1.6SnmpAdminString (SIZE (0..32))RO
NcipUrpfVrf1.3.6.1.4.1.9.9.451.1.4
TcipUrpfVrfTable1.3.6.1.4.1.9.9.451.1.4.1NA
RcipUrpfVrfEntry1.3.6.1.4.1.9.9.451.1.4.1.1NA
CcipUrpfVrfName1.3.6.1.4.1.9.9.451.1.4.1.1.1SnmpAdminString (SIZE (0..32))RO
NciscoIpUrpfMIBConformance1.3.6.1.4.1.9.9.451.2
NciscoIpUrpfMIBCompliances1.3.6.1.4.1.9.9.451.2.1
MciscoIpUrpfMIBCompliance1.3.6.1.4.1.9.9.451.2.1.1
NciscoIpUrpfMIBGroups1.3.6.1.4.1.9.9.451.2.2
GciscoIpUrpfMIBMainObjectGroup1.3.6.1.4.1.9.9.451.2.2.1
GciscoIpUrpfMIBVrfObjectGroup1.3.6.1.4.1.9.9.451.2.2.2
GciscoIpUrpfMIBNotifyGroup1.3.6.1.4.1.9.9.451.2.2.6

Textual conventions

UnicastRpfOptions Bits

allowDefault(0) allowSelfPing(1)

A bit string describing unicast Reverse Path Forwarding (RPF)
options:

'allowDefault'
    Allows the use of the default route for RPF verification.

'allowSelfPing'
    Allows a router to ping its own interface or interfaces.
UnicastRpfType INTEGER

disabled(3) loose(2) strict(1)

An enumerated integer-value describing the type of
unicast Reverse Path Forwarding (RPF) a system applies to
traffic received on an interface. UnicastRpfTypes 'strict' and
'loose' RPF methods are defined in RFC3704.

'disabled'
    The system does not perform unicast RPF on packets received
    by the interface.

'strict'
    The system performs strict unicast RPF on packets received
    by the interface.
'loose'
    The system performs loose unicast RPF on packets received by
    the interface.