CISCO-FRAME-RELAY-MIB
ciscoSystemsCisco Frame Relay MIB
snmptranslate -m CISCO-FRAME-RELAY-MIB -Tpsnmpwalk -v2c -c <community> -m CISCO-FRAME-RELAY-MIB <host> 1.3.6.1.4.1.9.9.49Imports
| CISCO-SMI | ciscoMgmt |
|---|---|
| FRAME-RELAY-DTE-MIB | frCircuitDlci, frCircuitEntry, frCircuitIfIndex, frDlcmiEntry |
| IF-MIB | InterfaceIndex, ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IciscoFrameRelayMIB | 1.3.6.1.4.1.9.9.49 | ||||||||||||
identity Cisco Frame Relay MIB | |||||||||||||
| NciscoFrMIBObjects | 1.3.6.1.4.1.9.9.49.1 | ||||||||||||
| NcfrLmiObjs | 1.3.6.1.4.1.9.9.49.1.1 | ||||||||||||
| TcfrLmiTable | 1.3.6.1.4.1.9.9.49.1.1.1 | NA | |||||||||||
table · not-accessible · current Table of Frame Relay LMI information that are either supplemental to the frDlcmiTable of RFC 1315 or specific to Cisco's implementation. | |||||||||||||
| RcfrLmiEntry | 1.3.6.1.4.1.9.9.49.1.1.1.1 | NA | |||||||||||
row · not-accessible · current Each entry of the table contains information of Frame Relay LMI over one physical interface. They are mostly FR generic and some Cisco specific.
| |||||||||||||
| CcfrLmiLinkstatus | 1.3.6.1.4.1.9.9.49.1.1.1.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Data link status via LMI.
| |||||||||||||
| CcfrLmiLinkType | 1.3.6.1.4.1.9.9.49.1.1.1.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Frame Relay link type.
| |||||||||||||
| CcfrLmiEnquiryIns | 1.3.6.1.4.1.9.9.49.1.1.1.1.3 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of Status Enquiry messages received.
| |||||||||||||
| CcfrLmiEnquiryOuts | 1.3.6.1.4.1.9.9.49.1.1.1.1.4 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of Status Enquiry messages sent.
| |||||||||||||
| CcfrLmiStatusIns | 1.3.6.1.4.1.9.9.49.1.1.1.1.5 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of Status messages received.
| |||||||||||||
| CcfrLmiStatusOuts | 1.3.6.1.4.1.9.9.49.1.1.1.1.6 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of Status messages sent.
| |||||||||||||
| CcfrLmiUpdateStatusIns | 1.3.6.1.4.1.9.9.49.1.1.1.1.7 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of Update Status messages received.
| |||||||||||||
| CcfrLmiUpdateStatusOuts | 1.3.6.1.4.1.9.9.49.1.1.1.1.8 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of Update Status messages sent
| |||||||||||||
| CcfrLmiStatusTimeouts | 1.3.6.1.4.1.9.9.49.1.1.1.1.9 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of times when timeout occurred on waiting for Status message
| |||||||||||||
| CcfrLmiStatusEnqTimeouts | 1.3.6.1.4.1.9.9.49.1.1.1.1.10 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of times when timeout occurred on waiting for Status Enquiry message
| |||||||||||||
| CcfrLmiN392Dce | 1.3.6.1.4.1.9.9.49.1.1.1.1.11 | INTEGER (0..10) | RO | ||||||||||
column · INTEGER (0..10) · read-only · current LMI error threshold for DCE interface. For DTE, value becomes 0. | |||||||||||||
| CcfrLmiN393Dce | 1.3.6.1.4.1.9.9.49.1.1.1.1.12 | INTEGER (0..10) | RO | ||||||||||
column · INTEGER (0..10) · read-only · current LMI monitored event count for DCE interface. For DTE, value becomes zero (0). | |||||||||||||
| CcfrLmiT392Dce | 1.3.6.1.4.1.9.9.49.1.1.1.1.13 | INTEGER (0..30) | RO | ||||||||||
column · INTEGER (0..30) · read-only · current DCE polling verification timer for DCE interface For DTE, the value becomes zero (0).
| |||||||||||||
| NcfrCircuitObjs | 1.3.6.1.4.1.9.9.49.1.2 | ||||||||||||
| TcfrCircuitTable | 1.3.6.1.4.1.9.9.49.1.2.1 | NA | |||||||||||
table · not-accessible · current Table of descriptive and statistics information that are generic to Frame Relay virtual circuits. | |||||||||||||
| RcfrCircuitEntry | 1.3.6.1.4.1.9.9.49.1.2.1.1 | NA | |||||||||||
row · not-accessible · current Each entry of the table contains information of a circuit that are not included in frCircuitTable of RFC1315 but are generic to Frame Relay.
| |||||||||||||
| CcfrCircuitDEins | 1.3.6.1.4.1.9.9.49.1.2.1.1.1 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of packets received with the Discarded Eligibility indictor (the DE bit) set.
| |||||||||||||
| CcfrCircuitDEouts | 1.3.6.1.4.1.9.9.49.1.2.1.1.2 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of packets transmitted with DE bit set.
| |||||||||||||
| CcfrCircuitDropPktsOuts | 1.3.6.1.4.1.9.9.49.1.2.1.1.3 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of discarded packets that were to be sent.
| |||||||||||||
| CcfrCircuitType | 1.3.6.1.4.1.9.9.49.1.2.1.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Basic circuit type
| |||||||||||||
| TcfrExtCircuitTable | 1.3.6.1.4.1.9.9.49.1.2.2 | NA | |||||||||||
table · not-accessible · current Table of Cisco implementation specific FR circuit information. This is a Cisco extension for the frCircuitTable of RFC 1315. | |||||||||||||
| RcfrExtCircuitEntry | 1.3.6.1.4.1.9.9.49.1.2.2.1 | NA | |||||||||||
row · not-accessible · current Each entry of the table contains information of a Frame Relay virtual circuit that are specific to Cisco implementation.
| |||||||||||||
| CcfrExtCircuitIfName | 1.3.6.1.4.1.9.9.49.1.2.2.1.1 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The textual name of the main interface or the subinterface that this DLCI is associated with. This is the same name string of an interface used in the configuration and all console displays, such as 'serial 0', 'serial 3/0.3', etc. | |||||||||||||
| CcfrExtCircuitIfType | 1.3.6.1.4.1.9.9.49.1.2.2.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Type of the subinterface this DLCI is associated with, if configured.
| |||||||||||||
| CcfrExtCircuitSubifIndex | 1.3.6.1.4.1.9.9.49.1.2.2.1.3 | InterfaceIndex | RO | ||||||||||
column · InterfaceIndex · read-only · current For value greater than zero (0), it indicates the network management interface index for the subinterface associated with this DLCI. Value 0 means the DLCI is not associated with any subinterface. | |||||||||||||
| CcfrExtCircuitMapStatus | 1.3.6.1.4.1.9.9.49.1.2.2.1.4 | INTEGER (0..2047) | RO | ||||||||||
column · INTEGER (0..2047) · read-only · current The mapping protocols (internally considered as
the 'link type') applied on this circuit.
The value ranges from 0 to 2047.
For point-to-point DLCI, the value stays zero.
Otherwise, the value is a sum. It initially takes
the value zero, then, for each type of Protocol,
2 raised to a power is added to the sum.
The following table presents respective power and
equivalent value for each applicable type:
Protocol Power Value
-------- ----- -----
IP 0 1
IPX 1 2
Appletalk 2 4
XNS 3 8
VINES 4 16
DECnet 5 32
CLNS 6 64
Bridging 7 128
RSRB 8 256
STUN 9 512
LLC2 10 1024
For example, value 3 means the circuit's mapping
protocols include IP and IPX. (3 = 2**1 + 2**0,
where 0 corresponds to IP and 1 to IPX.) Value 0
means there is currently no mapping protocol for
the circuit.
See cfrMapTable for more mapping information. | |||||||||||||
| CcfrExtCircuitCreateType | 1.3.6.1.4.1.9.9.49.1.2.2.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Identify the last source of the circuit's creation.
| |||||||||||||
| CcfrExtCircuitMulticast | 1.3.6.1.4.1.9.9.49.1.2.2.1.6 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Indicate if this DLCI is a multicast DLCI. | |||||||||||||
| CcfrExtCircuitRoutedDlci | 1.3.6.1.4.1.9.9.49.1.2.2.1.7 | DlciNumber | RO | ||||||||||
column · DlciNumber · read-only · current The routed DLCI to pair up with this DLCI for switching function. NOTE: Value zero (0) indicates that there is no such routed DLCI corresponding to this DLCI. | |||||||||||||
| CcfrExtCircuitRoutedIf | 1.3.6.1.4.1.9.9.49.1.2.2.1.8 | InterfaceIndex | RO | ||||||||||
column · InterfaceIndex · read-only · current The interface for the routed DLCI that pairs up with this DLCI for switching. Value greater than 0 is the InterfaceIndex for that interface. Value zero (0) indicates that there is no such routed DLCI corresponding to this DLCI. | |||||||||||||
| CcfrExtCircuitUncompressIns | 1.3.6.1.4.1.9.9.49.1.2.2.1.9 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of inbound octets of the data packets, accounted at Frame Relay level after FRF.9 payload decompression is applied. In the case of non-FRF.9, this value could be identical to frCircuitReceivedOctets, unless otherwise noted.
| |||||||||||||
| CcfrExtCircuitUncompressOuts | 1.3.6.1.4.1.9.9.49.1.2.2.1.10 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of outbound octets of the data packets, accounted at Frame Relay level before FRF.9 payload compression is applied. In the case of non-FRF.9, this value could be identical to frCircuitSentOctets, unless otherwise noted.
| |||||||||||||
| CcfrExtCircuitFECNOuts | 1.3.6.1.4.1.9.9.49.1.2.2.1.11 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total number of frames sent out to the network indicating forward congestion. | |||||||||||||
| CcfrExtCircuitBECNOuts | 1.3.6.1.4.1.9.9.49.1.2.2.1.12 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total number of frames sent out to the network indicating backward congestion. | |||||||||||||
| CcfrExtCircuitMinThruputOut | 1.3.6.1.4.1.9.9.49.1.2.2.1.13 | Integer32 (9600..1544000) | RO | ||||||||||
column · Integer32 (9600..1544000) · read-only · current Circuit's outgoing minimal Throughput based on configuration.
| |||||||||||||
| CcfrExtCircuitMinThruputIn | 1.3.6.1.4.1.9.9.49.1.2.2.1.14 | Integer32 (9600..1544000) | RO | ||||||||||
column · Integer32 (9600..1544000) · read-only · current Circuit's incoming minimal Throughput based on configuration.
| |||||||||||||
| CcfrExtCircuitBcastPktOuts | 1.3.6.1.4.1.9.9.49.1.2.2.1.15 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total number of broadcast packets sent out to the network. | |||||||||||||
| CcfrExtCircuitBcastByteOuts | 1.3.6.1.4.1.9.9.49.1.2.2.1.16 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total number of bytes sent out to the network in broadcast packets. | |||||||||||||
| CcfrExtCircuitBandwidth | 1.3.6.1.4.1.9.9.49.1.2.2.1.17 | Integer32 (0..16777215) | RO | ||||||||||
column · Integer32 (0..16777215) · read-only · current Bandwidth of the virtual circuit, acquired from Cisco typed LMI Full Status message.
| |||||||||||||
| CcfrExtCircuitShapeByteLimit | 1.3.6.1.4.1.9.9.49.1.2.2.1.18 | Integer32 (125..2147483647) | RO | ||||||||||
column · Integer32 (125..2147483647) · read-only · current Maximum number of tokens a token bucket can hold in any time interval in case of traffic shaping.
| |||||||||||||
| CcfrExtCircuitShapeInterval | 1.3.6.1.4.1.9.9.49.1.2.2.1.19 | Integer32 (10..125) | RO | ||||||||||
column · Integer32 (10..125) · read-only · current Committed rate measurement interval.
| |||||||||||||
| CcfrExtCircuitShapeByteIncrement | 1.3.6.1.4.1.9.9.49.1.2.2.1.20 | Integer32 (125..2147483647) | RO | ||||||||||
column · Integer32 (125..2147483647) · read-only · current Number of tokens added into the token bucket per time interval in case of traffic shaping.
| |||||||||||||
| CcfrExtCircuitShapePkts | 1.3.6.1.4.1.9.9.49.1.2.2.1.21 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total number of packets that went through traffic shaping. | |||||||||||||
| CcfrExtCircuitShapeBytes | 1.3.6.1.4.1.9.9.49.1.2.2.1.22 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total number of bytes that went through traffic shaping.
| |||||||||||||
| CcfrExtCircuitShapePktsDelay | 1.3.6.1.4.1.9.9.49.1.2.2.1.23 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total number of packets that were delayed by the traffic shaper. | |||||||||||||
| CcfrExtCircuitShapeBytesDelay | 1.3.6.1.4.1.9.9.49.1.2.2.1.24 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total number of bytes that were delayed by the traffic shaper.
| |||||||||||||
| CcfrExtCircuitShapeActive | 1.3.6.1.4.1.9.9.49.1.2.2.1.25 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Shows whether shaping is active or not. | |||||||||||||
| CcfrExtCircuitShapeAdapting | 1.3.6.1.4.1.9.9.49.1.2.2.1.26 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Type of Adaptive Shaping configured.
none(1) - No adaptive shaping configured
becn(2) - Backward Explicit Congestion Notification
foreSight(3) - ForeSight is the network traffic control
software used in Cisco WAN switches
| |||||||||||||
| CcfrExtCircuitTxDataRate | 1.3.6.1.4.1.9.9.49.1.2.2.1.27 | INTEGER (1..45000000) | RO | ||||||||||
column · INTEGER (1..45000000) · read-only · current The average rate (bytes/second) at which data is transmitted in this circuit. | |||||||||||||
| CcfrExtCircuitTxPktRate | 1.3.6.1.4.1.9.9.49.1.2.2.1.28 | INTEGER (1..45000000) | RO | ||||||||||
column · INTEGER (1..45000000) · read-only · current The average number of packets sent in a second in this circuit. | |||||||||||||
| CcfrExtCircuitRcvDataRate | 1.3.6.1.4.1.9.9.49.1.2.2.1.29 | INTEGER (1..45000000) | RO | ||||||||||
column · INTEGER (1..45000000) · read-only · current The average rate (bytes/second) at which data is received in this circuit. | |||||||||||||
| CcfrExtCircuitRcvPktRate | 1.3.6.1.4.1.9.9.49.1.2.2.1.30 | INTEGER (1..45000000) | RO | ||||||||||
column · INTEGER (1..45000000) · read-only · current The average number of packets received in a second in this circuit. | |||||||||||||
| NcfrMapObjs | 1.3.6.1.4.1.9.9.49.1.3 | ||||||||||||
| TcfrMapTable | 1.3.6.1.4.1.9.9.49.1.3.1 | NA | |||||||||||
table · not-accessible · current Table of protocols and addresses mapping information of FR virtual circuit. | |||||||||||||
| RcfrMapEntry | 1.3.6.1.4.1.9.9.49.1.3.1.1 | NA | |||||||||||
row · not-accessible · current Each entry of the table contains one mapping information of a Frame Relay virtual circuit. | |||||||||||||
| CcfrMapIndex | 1.3.6.1.4.1.9.9.49.1.3.1.1.1 | INTEGER (1..999) | RO | ||||||||||
column · INTEGER (1..999) · read-only · current An arbitrary Index to the mapping information associated with a certain circuit. The maximum value is arbitrarily picked which is considered sufficient for usual configuration. | |||||||||||||
| CcfrMapProtocol | 1.3.6.1.4.1.9.9.49.1.3.1.1.2 | CfrMapProtocols | RO | ||||||||||
column · CfrMapProtocols · read-only · current Mapping protocol for this circuit. | |||||||||||||
| CcfrMapAddress | 1.3.6.1.4.1.9.9.49.1.3.1.1.3 | OCTET STRING (SIZE (0..64)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..64)) · read-only · current Mapping protocol address at remote end for this DLCI. NOTE: For point-to-point DLCI, the string is fixed to be point-to-point. | |||||||||||||
| CcfrMapType | 1.3.6.1.4.1.9.9.49.1.3.1.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Type for the map creation.
| |||||||||||||
| CcfrMapEncaps | 1.3.6.1.4.1.9.9.49.1.3.1.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indication of the encapsulation type for this mapping protocol.
| |||||||||||||
| CcfrMapBroadcast | 1.3.6.1.4.1.9.9.49.1.3.1.1.6 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Broadcast enabled or disabled. | |||||||||||||
| CcfrMapPayloadCompress | 1.3.6.1.4.1.9.9.49.1.3.1.1.7 | TruthValue | RO | deprecated | |||||||||
column · TruthValue · read-only · deprecated Indicate if payload compression is enabled. | |||||||||||||
| CcfrMapTcpHdrCompress | 1.3.6.1.4.1.9.9.49.1.3.1.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current TCP header compression type, if applicable.
| |||||||||||||
| CcfrMapRtpHdrCompress | 1.3.6.1.4.1.9.9.49.1.3.1.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current RTP header compression type, if applicable. The value 'passive' means that the header of an outgoing RTP/IP packet is compressed only if an incoming RTP/IP packet had a compressed header. The value 'active' means the header of every outgoing RTP/IP packet is compressed.
| |||||||||||||
| CcfrMapPayloadCompressType | 1.3.6.1.4.1.9.9.49.1.3.1.1.10 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current FR payload compression type, if applicable. FRF.9 is the Frame Relay Forum Implementation Agreement on FR payload compression. The compression can be done by either software or hardware (when equipped with the supporting hardware), depending on configuration.
| |||||||||||||
| NcfrSvcObjs | 1.3.6.1.4.1.9.9.49.1.4 | ||||||||||||
| TcfrSvcTable | 1.3.6.1.4.1.9.9.49.1.4.1 | NA | |||||||||||
table · not-accessible · current Table of FR SVC specific, descriptive and statistics information. | |||||||||||||
| RcfrSvcEntry | 1.3.6.1.4.1.9.9.49.1.4.1.1 | NA | |||||||||||
row · not-accessible · current Each entry of the table contains circuit information specific to a Frame Relay Switched Virtual Circuit. | |||||||||||||
| CcfrSvcAddrLocal | 1.3.6.1.4.1.9.9.49.1.4.1.1.1 | OCTET STRING (SIZE (0..64)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..64)) · read-only · current Local E.164/X.125 address for the circuit. | |||||||||||||
| CcfrSvcAddrRemote | 1.3.6.1.4.1.9.9.49.1.4.1.1.2 | OCTET STRING (SIZE (0..64)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..64)) · read-only · current Remote E.164/X.125 address for the circuit. | |||||||||||||
| CcfrSvcThroughputIn | 1.3.6.1.4.1.9.9.49.1.4.1.1.3 | Integer32 (9600..1544000) | RO | ||||||||||
column · Integer32 (9600..1544000) · read-only · current Circuit's incoming throughput. For outgoing throughput (commonly referred to as CIR) see frCircuitThroughput per RFC1315.
| |||||||||||||
| CcfrSvcMinThruputOut | 1.3.6.1.4.1.9.9.49.1.4.1.1.4 | Integer32 (9600..1544000) | RO | deprecated | |||||||||
column · Integer32 (9600..1544000) · read-only · deprecated Circuit's outgoing minimal Throughput.
| |||||||||||||
| CcfrSvcMinThruputIn | 1.3.6.1.4.1.9.9.49.1.4.1.1.5 | Integer32 (9600..1544000) | RO | deprecated | |||||||||
column · Integer32 (9600..1544000) · read-only · deprecated Circuit's incoming minimal Throughput.
| |||||||||||||
| CcfrSvcCommitBurstIn | 1.3.6.1.4.1.9.9.49.1.4.1.1.6 | Integer32 (9600..1544000) | RO | ||||||||||
column · Integer32 (9600..1544000) · read-only · current Circuit's incoming Committed Burst Rate. See ANSI and/or ITU specifications for definition and calculations. For outgoing CBR, see frCircuitCommittedBurst per RFC 1315. | |||||||||||||
| CcfrSvcExcessBurstIn | 1.3.6.1.4.1.9.9.49.1.4.1.1.7 | Integer32 (9600..2440000) | RO | ||||||||||
column · Integer32 (9600..2440000) · read-only · current Circuit's incoming Excess Burst Rate. See ANSI and/or ITU specifications for definition and calculations. For outgoing EBR, see frCircuitExcessBurst per RFC 1315. | |||||||||||||
| CcfrSvcIdleTime | 1.3.6.1.4.1.9.9.49.1.4.1.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Circuit's idle time period. If expires, the circuit is cleared.
| |||||||||||||
| NcfrElmiObjs | 1.3.6.1.4.1.9.9.49.1.5 | ||||||||||||
| ScfrElmiIpAddr | 1.3.6.1.4.1.9.9.49.1.5.1 | IpAddress | RO | 0.0.0.0 | |||||||||
scalar · IpAddress · read-only · current This object represents the Management address of the device used for address registration. Network management station can send management messages to this IP address. This can be user configured address or the address of one of the interfaces on the device. If address registration is disabled then this will have a value of 0.0.0.0. This object is accessible only if the ELMI protocol is supported on the device Example values from LibreNMS test devices
| |||||||||||||
| TcfrElmiTable | 1.3.6.1.4.1.9.9.49.1.5.2 | NA | |||||||||||
table · not-accessible · current Table of CISCO Frame Relay ELMI information that is specific to CISCO implementation | |||||||||||||
| RcfrElmiEntry | 1.3.6.1.4.1.9.9.49.1.5.2.1 | NA | |||||||||||
row · not-accessible · current Each entry of the table contains information about a physical interface. The table can be accessible only if the device supports ELMI protocol and if LMI is enabled on the interface.
| |||||||||||||
| CcfrElmiLinkStatus | 1.3.6.1.4.1.9.9.49.1.5.2.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This variable states whether Enhanced Link Management Interface(ELMI) protocol is enabled or not on a frame relay interface.
| |||||||||||||
| CcfrElmiArStatus | 1.3.6.1.4.1.9.9.49.1.5.2.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This variable states whether the Enhanced Link Management Interface(ELMI) address registration(AR) mechanism is enabled or not on a frame relay interface. A value of 1 indicates ELMI AR is supported on the interface. A value of 2 indicates ELMI AR is supported but the user disabled the exchange of IP address and ifIndex with the neighboring device. This object doesn't have any significance if cfrElmiLinkStatus is disabled on the interface.
| |||||||||||||
| CcfrElmiRemoteStatus | 1.3.6.1.4.1.9.9.49.1.5.2.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This variable states the Enhanced Link Management(ELMI) status on the other end of the interface. If cfrElmiLinkStatus is enabled on the other end a value of 1 will be returned, else 2 will be returned. This object doesn't have any significance if cfrElmiLinkStatus is disabled on the interface
| |||||||||||||
| TcfrElmiNeighborTable | 1.3.6.1.4.1.9.9.49.1.5.3 | NA | |||||||||||
table · not-accessible · current Table of CISCO Frame Relay Neighbor ELMI information that is specific to CISCO implementation. | |||||||||||||
| RcfrElmiNeighborEntry | 1.3.6.1.4.1.9.9.49.1.5.3.1 | NA | |||||||||||
row · not-accessible · current Each entry of the table contains information of the neighboring device connected to a physical interface. The entry will be present only if ELMI is enabled on the neighboring device interface. If the value of the cfrElmiRemoteStatus in the cfrElmiEntry is 1 then a valid entry exists for the interface. If ELMI is not supported on the remote end then, the neighbor information for the interface will not be present
| |||||||||||||
| CcfrElmiNeighborArStatus | 1.3.6.1.4.1.9.9.49.1.5.3.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This variable indicates the status of ELMI Address registration(AR) on the neighboring device. A value of 1 indicates ELMI AR is not supported on the neighboring device. A value of 2 indicates ELMI AR is enabled on the interface. A value of 3 indicates AR is supported, but user disabled the exchange of IP address and ifIndex with the neighbor.
| |||||||||||||
| CcfrElmiNeighborIpAddress | 1.3.6.1.4.1.9.9.49.1.5.3.1.2 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current The Management IP address of the neighboring device to which the other end of this interface is connected. Network management system can use this address to send management messages to the device. If address registration is not supported on the remote end then the value will be 0.0.0.0. NMS uses this object in the topology discovery of the network. | |||||||||||||
| CcfrElmiNeighborIfIndex | 1.3.6.1.4.1.9.9.49.1.5.3.1.3 | InterfaceIndex | RO | ||||||||||
column · InterfaceIndex · read-only · current The Interface index of the neighboring device to which this interface is connected. If the value of cfrElmiNeighborArStatus is 2 then this will have a valid value. If the value of cfrElmiNeighborArStatus is 3 or 1 then value of this object will be 0. NMS uses this object in the topology discovery of the network. | |||||||||||||
| CcfrElmiNeighborVendorName | 1.3.6.1.4.1.9.9.49.1.5.3.1.4 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Vendor name of the neighboring device to which the other end of this interface is connected. | |||||||||||||
| CcfrElmiNeighborPlatformName | 1.3.6.1.4.1.9.9.49.1.5.3.1.5 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Platform name of the neighboring device to which the other end of this interface is connected. | |||||||||||||
| CcfrElmiNeighborDeviceName | 1.3.6.1.4.1.9.9.49.1.5.3.1.6 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Device name of the neighboring device to which the other end of this interface is connected. | |||||||||||||
| NcfrFragObjs | 1.3.6.1.4.1.9.9.49.1.6 | ||||||||||||
| TcfrFragTable | 1.3.6.1.4.1.9.9.49.1.6.1 | NA | |||||||||||
table · not-accessible · current Table of Frame Relay Fragmentation information. These are specific to Cisco's implementation. | |||||||||||||
| RcfrFragEntry | 1.3.6.1.4.1.9.9.49.1.6.1.1 | NA | |||||||||||
row · not-accessible · current Each entry of the table contains details of fragmentation configured on this circuit. | |||||||||||||
| CcfrFragSize | 1.3.6.1.4.1.9.9.49.1.6.1.1.1 | INTEGER (16..1600) | RO | ||||||||||
column · INTEGER (16..1600) · read-only · current cfrFragSize defines the payload size of a fragment and it excludes the FR headers and any FR fragmentation header.
| |||||||||||||
| CcfrFragType | 1.3.6.1.4.1.9.9.49.1.6.1.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Fragmentation type configured by the user. The types supported are end-to-end, VoFR-cisco and VoFR. | |||||||||||||
| CcfrFragInPkts | 1.3.6.1.4.1.9.9.49.1.6.1.1.3 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total number of frames received that have a fragmentation header.
| |||||||||||||
| CcfrFragOutPkts | 1.3.6.1.4.1.9.9.49.1.6.1.1.4 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total number of fragments that are transmitted with a fragmenation header.
| |||||||||||||
| CcfrFragInOctets | 1.3.6.1.4.1.9.9.49.1.6.1.1.5 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total number of bytes received in frames that have a fragmentation header. The number of bytes include the FR header.
| |||||||||||||
| CcfrFragOutOctets | 1.3.6.1.4.1.9.9.49.1.6.1.1.6 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total number of bytes that are transmitted in frames with a fragmenation header. The number of bytes also includes the FR header.
| |||||||||||||
| CcfrFragNotInPkts | 1.3.6.1.4.1.9.9.49.1.6.1.1.7 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total number of frames received that do not require reassembly and therefore will not contain the fragmentation header. This counter is valid only when end-to-end fragmentation type is set.
| |||||||||||||
| CcfrFragNotOutPkts | 1.3.6.1.4.1.9.9.49.1.6.1.1.8 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total number of frames transmitted without fragmenting and therefore will not contain the fragmentation header. This counter is valid only when end-to-end fragmentation type is set.
| |||||||||||||
| CcfrFragNotInOctets | 1.3.6.1.4.1.9.9.49.1.6.1.1.9 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total number of bytes received in frames that do not require reassembly and therefore will not contain the fragmentation header. This counter is valid only when end-to-end fragmentation type is set.
| |||||||||||||
| CcfrFragNotOutOctets | 1.3.6.1.4.1.9.9.49.1.6.1.1.10 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total number of bytes transmitted in frames that are not fragmented and therefore will not contain the fragmentation header. This counter is valid only when end-to-end fragmentation type is set.
| |||||||||||||
| CcfrFragAssembledInPkts | 1.3.6.1.4.1.9.9.49.1.6.1.1.11 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total number of fully reassembled frames. It also counts the number of packets received without FR fragmentation header (i.e. in un-fragmentated pkts).
| |||||||||||||
| CcfrFragAssembledInOctets | 1.3.6.1.4.1.9.9.49.1.6.1.1.12 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total number of bytes received in fully reassembled frames. It also counts the number of packets received without FR fragmentation header (i.e.in un-fragmentated pkts).
| |||||||||||||
| CcfrFragPreOutPkts | 1.3.6.1.4.1.9.9.49.1.6.1.1.13 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total number of frames fragmented and trasmitted. It also counts the number of packets trasmitted without FR fragmentation header (i.e. in un-fragmentated pkts).
| |||||||||||||
| CcfrFragPreOutOctets | 1.3.6.1.4.1.9.9.49.1.6.1.1.14 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total number of bytes transmitted in fragmented frames. It also counts the number of bytes trasmitted in frames without FR fragmentation header (i.e. in un-fragmentated pkts).
| |||||||||||||
| CcfrFragDroppedReAssembledInPkts | 1.3.6.1.4.1.9.9.49.1.6.1.1.15 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of received fragments dropped for reasons such as : running out of memory, receiving segments out of sequence, receiving an unexpected frame with a B bit set, timing out on a reassembling frame.
| |||||||||||||
| CcfrFragDroppedFragmentedOutPkts | 1.3.6.1.4.1.9.9.49.1.6.1.1.16 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of fragments dropped because of running out of memory.
| |||||||||||||
| CcfrFragTimeoutsIn | 1.3.6.1.4.1.9.9.49.1.6.1.1.17 | INTEGER (0..1000) | RO | ||||||||||
column · INTEGER (0..1000) · read-only · current Number of reassemble timer timeouts for this circuit. A frame requiring more than two minutes to fully reassemble is dropped and timeout will be incremented by one. | |||||||||||||
| CcfrFragOutOfSeqFragPkts | 1.3.6.1.4.1.9.9.49.1.6.1.1.18 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Indicates the total number of packets received with an unexpected sequence number. All fragments being reassembled are dropped. Start a new packet with the received segment only if the B bit is set on the segment. Otherwise the new segment is also dropped.
| |||||||||||||
| CcfrFragUnexpectedBBitSetPkts | 1.3.6.1.4.1.9.9.49.1.6.1.1.19 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of fragments received in this circuit with a B bit set. All fragments being reassembled are dropped and a new packet is started with this segment.
| |||||||||||||
| CcfrFragSeqMissedPkts | 1.3.6.1.4.1.9.9.49.1.6.1.1.20 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of fragments received in this circuit with skipped sequence number.
| |||||||||||||
| CcfrFragInterleavedOutPkts | 1.3.6.1.4.1.9.9.49.1.6.1.1.21 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of packets that have been interleaved between segments.
| |||||||||||||
| NcfrConnectionObjs | 1.3.6.1.4.1.9.9.49.1.7 | ||||||||||||
| TcfrConnectionTable | 1.3.6.1.4.1.9.9.49.1.7.1 | NA | |||||||||||
table · not-accessible · current Table of Frame Relay/Frame Relay and Frame Relay/ATM Network/Service Interworking connection information. These are specific to Cisco's implementation. | |||||||||||||
| RcfrConnectionEntry | 1.3.6.1.4.1.9.9.49.1.7.1.1 | NA | |||||||||||
row · not-accessible · current Each entry of the table contains information of a connection that is established for Frame Relay/Frame Relay and Frame Relay/ATM Network/Service Interworking. | |||||||||||||
| CcfrConnName | 1.3.6.1.4.1.9.9.49.1.7.1.1.1 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The textual name of a for FR/FR or FR/ATM Network/Service Interworking connection. | |||||||||||||
| CcfrConnID | 1.3.6.1.4.1.9.9.49.1.7.1.1.2 | INTEGER (1..2000) | RO | ||||||||||
column · INTEGER (1..2000) · read-only · current The numerical identifier of a FR/FR or FR/ATM Network/Service Interworking connection. | |||||||||||||
| CcfrConnState | 1.3.6.1.4.1.9.9.49.1.7.1.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Status of a FR/FR or FR/ATM Network/Service Interworking connection. | |||||||||||||
| CcfrConnSegment1Name | 1.3.6.1.4.1.9.9.49.1.7.1.1.4 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The textual name used to identify the first segment of a FR/FR or FR/ATM Network/Service Interworking connection. | |||||||||||||
| CcfrConnSegment1VCGroup | 1.3.6.1.4.1.9.9.49.1.7.1.1.5 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The textual name used to identify the VC-Group in the
first segment of a Frame Relay/ATM Network Interworking
(FRF.5)connection.
This field is not applicabe in case of,
FRF.8 (Frame Relay/ATM Service Interworking)
and
FR-FR connectione. | |||||||||||||
| CcfrConnSegment1Dlci | 1.3.6.1.4.1.9.9.49.1.7.1.1.6 | DlciNumber | RO | ||||||||||
column · DlciNumber · read-only · current The DLCI used as the first segment of a FR-FR or FR-ATM Network/Service Interworking connection. | |||||||||||||
| CcfrConnSegment2Name | 1.3.6.1.4.1.9.9.49.1.7.1.1.7 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The interface on which second segment of a FR-FR or FR-ATM Network/Service Interworking connection is configured. | |||||||||||||
| CcfrConnSegment2Vpi | 1.3.6.1.4.1.9.9.49.1.7.1.1.8 | INTEGER (0..4095) | RO | ||||||||||
column · INTEGER (0..4095) · read-only · current The value of VPI, in the ATM connection, used as the second segment of a FR-ATM Network/Service Interworking connection. In case of FR-FR connection, the same will be used to display the DLCI used as the second segment. | |||||||||||||
| CcfrConnSegment2Vci | 1.3.6.1.4.1.9.9.49.1.7.1.1.9 | INTEGER (0..4095) | RO | ||||||||||
column · INTEGER (0..4095) · read-only · current The value of VCI, in the ATM connection, used as the second segment of a FR-ATM Network/Service Interworking connection. In case of FR-FR connection, this is not supported. | |||||||||||||
| CcfrConnServiceTranslation | 1.3.6.1.4.1.9.9.49.1.7.1.1.10 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Shows whether Service Translation Mode is supported or not. Translation Mode is the interworking of internetworking (routed and/or bridged) protocols used in FR-ATM Service PVC Interworking(FRF.8). This is not supported in case of FRF.5 (FR-ATM network Interworking) and FR-FR connections.
| |||||||||||||
| CcfrConnFrSscsDlci | 1.3.6.1.4.1.9.9.49.1.7.1.1.11 | DlciNumber | RO | ||||||||||
column · DlciNumber · read-only · current The DLCI value used at the FR-SSCS layer. This is one of connection multiplexing methods used in Frame Relay/ATM Network Interworking. Not supported in case of FRF.8 (FR-ATM Service PVC Interworking) and FR-FR connections | |||||||||||||
| CcfrConnEfciBit | 1.3.6.1.4.1.9.9.49.1.7.1.1.12 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Shows whether the FECN field in the FR frame is mapped to the ATM EFCI field of every cell generated out of the FR frame. This is used to indicate congestion in FR to ATM direction in case of Frame Relay/ATM Service PVC Interworking. Not supported in FRF.5 (Frame Relay/ATM Network Interworking and FR-FR connections.
| |||||||||||||
| CcfrConnDeBit | 1.3.6.1.4.1.9.9.49.1.7.1.1.13 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The method of operation for loss priority mapping in the B-ISDN to FR direction.. Not supported in case of FR-FR connection.
| |||||||||||||
| CcfrConnClpBit | 1.3.6.1.4.1.9.9.49.1.7.1.1.14 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The method of operation used to map loss priority mapping in the FR to ATM direction. Not supported in case of FR-FR connection.
| |||||||||||||
| NciscoFrMIBConformance | 1.3.6.1.4.1.9.9.49.3 | ||||||||||||
| NciscoFrMIBCompliances | 1.3.6.1.4.1.9.9.49.3.1 | ||||||||||||
| MciscoFrMIBCompliance | 1.3.6.1.4.1.9.9.49.3.1.1 | obsolete | |||||||||||
compliance · obsolete The compliance statement for entities which implement this Cisco Frame Relay MIB.
| |||||||||||||
| MciscoFrMIBCompliancesRev1 | 1.3.6.1.4.1.9.9.49.3.1.2 | obsolete | |||||||||||
compliance · obsolete The compliance statement for entities which implement this Cisco Frame Relay MIB.
| |||||||||||||
| MciscoFrMIBCompliancesRev2 | 1.3.6.1.4.1.9.9.49.3.1.3 | obsolete | |||||||||||
compliance · obsolete The compliance statement for entities which implement this Cisco Frame Relay MIB. | |||||||||||||
| MciscoFrMIBCompliancesRev3 | 1.3.6.1.4.1.9.9.49.3.1.4 | deprecated | |||||||||||
compliance · deprecated The compliance statement for entities which implement this Cisco Frame Relay MIB. | |||||||||||||
| MciscoFrMIBCompliancesRev4 | 1.3.6.1.4.1.9.9.49.3.1.5 | ||||||||||||
compliance · current The compliance statement for entities which implement this Cisco Frame Relay MIB. | |||||||||||||
| NciscoFrMIBGroups | 1.3.6.1.4.1.9.9.49.3.2 | ||||||||||||
| GciscoFrMIBGroup | 1.3.6.1.4.1.9.9.49.3.2.1 | deprecated | |||||||||||
group · deprecated The compliance statement for entities which implement this Cisco Frame Relay MIB.
| |||||||||||||
| GciscoFrMIBGroupRev1 | 1.3.6.1.4.1.9.9.49.3.2.2 | deprecated | |||||||||||
group · deprecated A collection of objects providing router's Frame Relay configuration and statistics information that are additional to the IETF standard Frame Relay DTE MIB.
| |||||||||||||
| GciscoFrLmiMIBGroup | 1.3.6.1.4.1.9.9.49.3.2.3 | ||||||||||||
group · current A collection of objects providing router's Frame Relay LMI configuration and statistics information either supplemental to the frDlcmiTable of RFC 1315 or specific to Cisco's implementation. | |||||||||||||
| GciscoFrCircuitMIBGroup | 1.3.6.1.4.1.9.9.49.3.2.4 | ||||||||||||
group · current A collection of objects providing information of a circuit that are not included in frCircuitTable of RFC1315 but are generic to Frame Relay. | |||||||||||||
| GciscoExtCircuitMIBGroup | 1.3.6.1.4.1.9.9.49.3.2.5 | deprecated | |||||||||||
group · deprecated A collection of objects that provide Cisco implementation specific FR circuit information. This is a Cisco extension for the frCircuitTable of RFC 1315.
| |||||||||||||
| GciscoFrTsMIBGroup | 1.3.6.1.4.1.9.9.49.3.2.6 | ||||||||||||
group · current A collection of objects that provide information about Frame Relay Traffic Shaping. These are additional to the IETF standard Frame Relay DTE MIB. | |||||||||||||
| GciscoFrMapMIBGroup | 1.3.6.1.4.1.9.9.49.3.2.7 | ||||||||||||
group · current A collection of objects to provide mapping information of a Frame Relay virtual circuit. These are additional to the IETF standard Frame Relay DTE MIB. | |||||||||||||
| GciscoFrSvcMIBGroup | 1.3.6.1.4.1.9.9.49.3.2.8 | ||||||||||||
group · current A collection of objects to provide circuit information specific to a Frame Relay Switched Virtual Circuit.This is in addition to the IETF standard Frame Relay DTE MIB. | |||||||||||||
| GciscoFrElmiMIBGroup | 1.3.6.1.4.1.9.9.49.3.2.9 | deprecated | |||||||||||
group · deprecated A collection of objects providing router's ELMI information. | |||||||||||||
| GciscoFrElmiMIBGroup1 | 1.3.6.1.4.1.9.9.49.3.2.10 | ||||||||||||
group · current A collection of objects providing router's ELMI information. | |||||||||||||
| GciscoFrFragMIBGroup | 1.3.6.1.4.1.9.9.49.3.2.11 | ||||||||||||
group · current A collection of objects providing router's fragmentation information.
| |||||||||||||
| GciscoFrConnMIBGroup | 1.3.6.1.4.1.9.9.49.3.2.12 | ||||||||||||
group · current A collection of objects providing router's fragmentation information. | |||||||||||||
| GciscoExtCircuitMIBGroup1 | 1.3.6.1.4.1.9.9.49.3.2.13 | ||||||||||||
group · current A collection of objects that provide Cisco implementation specific FR circuit information. This is a Cisco extension for the frCircuitTable of RFC 1315.
| |||||||||||||
Textual conventions
CfrMapProtocolsINTEGERapollo(12)appletalk(16)arp(1)bridge(38)clns(25)compressedRtp(83)compressedTcp(48)decnet(22)dlsw(63)frArp(40)frSwitch(53)ieeeSpanning(18)ip(7)llc2(49)nhrp(74)novell(11)rsrb(37)serialArp(6)stun(39)uncompressedTcp(47)vines(13)wildcard(999)xns(10)Cisco link types (network protocols) that run over Frame Relay. Associated values, except for wildcard, match assigned values of internal software respectively.
DlciNumberINTEGER (0..1023)Numerical format of Data Link Connection Identifier (DLCI) in decimal, identical to the 'DLCI' as INTEGER of 0..DLCINumber in RFC1315. The maximum value depends on Frame Relay implementation, which is currently set to be 1023 for 2-octet address format per UNI Implementation Agreement FRF.1.
Groups and compliance
- ciscoExtCircuitMIBGroup
- ciscoExtCircuitMIBGroup1
- ciscoFrCircuitMIBGroup
- ciscoFrConnMIBGroup
- ciscoFrElmiMIBGroup
- ciscoFrElmiMIBGroup1
- ciscoFrFragMIBGroup
- ciscoFrLmiMIBGroup
- ciscoFrMIBCompliance
- ciscoFrMIBCompliancesRev1
- ciscoFrMIBCompliancesRev2
- ciscoFrMIBCompliancesRev3
- ciscoFrMIBCompliancesRev4
- ciscoFrMIBGroup
- ciscoFrMIBGroupRev1
- ciscoFrMapMIBGroup
- ciscoFrSvcMIBGroup
- ciscoFrTsMIBGroup