CISCO-DMN-DSG-TUNING-MIB
Scientific-Atlanta, Inc.Cisco DSG Tuning MIB.
snmptranslate -m CISCO-DMN-DSG-TUNING-MIB -Tpsnmpwalk -v2c -c <community> -m CISCO-DMN-DSG-TUNING-MIB <host> 1.3.6.1.4.1.1429.2.2.5.5Imports
| CISCO-DMN-DSG-ROOT-MIB | ciscoDSGUtilities |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IciscoDSGTuning | 1.3.6.1.4.1.1429.2.2.5.5 | ||||||||||||
identity Cisco DSG Tuning MIB. | |||||||||||||
| NactiveTuning | 1.3.6.1.4.1.1429.2.2.5.5.1 | ||||||||||||
| SactiveTuningInput | 1.3.6.1.4.1.1429.2.2.5.5.1.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Select Input for tuning.
| |||||||||||||
| SactiveTuningValidateOrbPos | 1.3.6.1.4.1.1429.2.2.5.5.1.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Command used to validate orbital position. Set this object to yes( 2 ) to validate Orbital position.
| |||||||||||||
| SactiveTuningChScan | 1.3.6.1.4.1.1429.2.2.5.5.1.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Channel Scan command. Setting scan( 1 ) triggers the channel scanning process.
| |||||||||||||
| NactiveTuningTable | 1.3.6.1.4.1.1429.2.2.5.5.2 | ||||||||||||
| TactiveTunerTable | 1.3.6.1.4.1.1429.2.2.5.5.2.1 | NA | |||||||||||
table · not-accessible · current Active Tuner Table. | |||||||||||||
| RactiveTunerEntry | 1.3.6.1.4.1.1429.2.2.5.5.2.1.1 | NA | |||||||||||
| CactiveTunerIndex | 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.1 | Integer32 (1) | NA | ||||||||||
column · Integer32 (1) · not-accessible · current Active Tuner Index. | |||||||||||||
| CactiveTunerRFInput | 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Active Tuner RF Input.
| |||||||||||||
| CactiveTunerFreq | 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.3 | Integer32 (0..15000000) | RW | ||||||||||
column · Integer32 (0..15000000) · read-write · current The Satellite Downlink frequency in the range of 0 to 15000000 KHz in steps of 1 KHz. | |||||||||||||
| CactiveTunerSymbolRate | 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.4 | Integer32 (10000..450000) | RW | ||||||||||
column · Integer32 (10000..450000) · read-write · current Data rate on the transport stream in millions of symbols per second. Range is from 10000 to 450000 hectoSym/second in steps of 1 hectoSym/second. ( 1 hecto = 10^2 ). | |||||||||||||
| CactiveTunerDVBSFEC | 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Forward Error Correction Rate. For DVB-S2 modulation only auto is applicable. For DVB-S modulation all options are applicable.
| |||||||||||||
| CactiveTunerModulation | 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Signal Modulation type.
| |||||||||||||
| CactiveTunerRollOff | 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Alpha filtering - for DVB-S: 0.20/0.35, for DVB-S2: 0.20/0.25/0.35. Roll off with scaling factor of 1/100.
| |||||||||||||
| CactiveTunerIQ | 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Spectrum Inversion.
| |||||||||||||
| TactiveInputTable | 1.3.6.1.4.1.1429.2.2.5.5.2.2 | NA | |||||||||||
table · not-accessible · current Active Input Table. | |||||||||||||
| RactiveInputEntry | 1.3.6.1.4.1.1429.2.2.5.5.2.2.1 | NA | |||||||||||
| CactiveInputRFIndex | 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current Selection of RF Input.
| |||||||||||||
| CactiveInputLNBType | 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current LNB Type: C-Band/Single Ku/Dual Ku/Advanced. For simplified setup select C-Band or Ku-Band. If there is a need to configure LO, select Advanced.
| |||||||||||||
| CactiveInputLNBTrim | 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.3 | Integer32 (0..15000000) | RW | ||||||||||
column · Integer32 (0..15000000) · read-write · current Low Noise Block Trim Level 1 when type is not advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz. | |||||||||||||
| CactiveInputLNBTrim2 | 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.4 | Integer32 (0..15000000) | RW | ||||||||||
column · Integer32 (0..15000000) · read-write · current Low Noise Block Trim Level 2 when type is not advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz. | |||||||||||||
| CactiveInputLocalOscFreq1 | 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.5 | Integer32 (0..15000000) | RW | ||||||||||
column · Integer32 (0..15000000) · read-write · current RW, only when LNB Type is Advanced. Local Oscillator #1 Frequency when type is advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz. | |||||||||||||
| CactiveInputLocalOscFreq2 | 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.6 | Integer32 (0..15000000) | RW | ||||||||||
column · Integer32 (0..15000000) · read-write · current RW, only when LNB Type is Advanced. Local Oscillator #2 Frequency when type is advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz. | |||||||||||||
| CactiveInputCrossOver | 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.7 | Integer32 (0..15000000) | RW | ||||||||||
column · Integer32 (0..15000000) · read-write · current Crossover Frequency for Local Oscillator. It has a range of 0 to 15000000 KHz in steps of 1KHz. | |||||||||||||
| CactiveInputLocalOscControl | 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current 22KHz Local Osillator Control.
| |||||||||||||
| CactiveInputOrbitalPos | 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.9 | Integer32 (0..3600) | RW | ||||||||||
column · Integer32 (0..3600) · read-write · current Orbital location Azimuth.The range is from 0 to 3600 in steps of 1. The scaling factor is 1/10th of a degree. | |||||||||||||
| CactiveInputEastWestFlag | 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current RF Mapping Location East/West Flag.
| |||||||||||||
| CactiveInputPolarization | 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.11 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current RF Mapping Polarization.
| |||||||||||||
| CactiveInputSatName | 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.12 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Satellite Name Matching the Orbital Position + E/W Flag. Enter Satellite/Transponder Name to fill in Azimuth and E/W Flag automatically. | |||||||||||||
| CactiveInputLastLNBConfig | 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.13 | Integer32 (1..10) | RW | ||||||||||
column · Integer32 (1..10) · read-write · current LNB configuration last applied. | |||||||||||||
| CactiveInputDiSeqCEnable | 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.14 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current DiSeqC On/Off.
| |||||||||||||
| CactiveInputDiSeqCSwitch | 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.15 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current DiSeqC switch selection.
| |||||||||||||
| TlnbPowerTable | 1.3.6.1.4.1.1429.2.2.5.5.2.3 | NA | |||||||||||
table · not-accessible · current LNB power Table. | |||||||||||||
| RlnbPowerEntry | 1.3.6.1.4.1.1429.2.2.5.5.2.3.1 | NA | |||||||||||
| ClnbPowerIndex | 1.3.6.1.4.1.1429.2.2.5.5.2.3.1.1 | Integer32 (1) | NA | ||||||||||
column · Integer32 (1) · not-accessible · current Low Noise Block Power Index. | |||||||||||||
| ClnbPowerInput | 1.3.6.1.4.1.1429.2.2.5.5.2.3.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Low Noise Block Power Input.
| |||||||||||||
| ClnbPowerControl | 1.3.6.1.4.1.1429.2.2.5.5.2.3.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Active LNB Power setting.13/18V is to control dual polarity LNB. The convention is: Horizontal-18V; Vertical-13V. Valid settings are, Off 13V ( 13V always, ignore polarity in NIT ) 18V ( 18V always, ignore polarity in NIT ) 13V-NIT ( 13V initially, over-ride by polarity in NIT ) 18V-NIT ( 18V initially, over-ride by polarity in NIT ).
| |||||||||||||
| ClnbPowerStatus | 1.3.6.1.4.1.1429.2.2.5.5.2.3.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Low Noise Block Power Supply Status.
| |||||||||||||
| NtuningStatusTable | 1.3.6.1.4.1.1429.2.2.5.5.3 | ||||||||||||
| TsatSignalTable | 1.3.6.1.4.1.1429.2.2.5.5.3.1 | NA | |||||||||||
table · not-accessible · current Satellite Signal Table. | |||||||||||||
| RsatSignalEntry | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1 | NA | |||||||||||
| CsatSignalIndex | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.1 | Integer32 (1) | NA | ||||||||||
column · Integer32 (1) · not-accessible · current Satellite Signal Table Index. | |||||||||||||
| CsatSignalPvBer | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.2 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Status: DVB-S Post-Viterbi Bit Error Rate. | |||||||||||||
| CsatSignalQPSKBer | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.3 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Status: Quadrature phase-shift keying ( QPSK ) Bit error rate. | |||||||||||||
| CsatSignalLdpCber | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.4 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Status: DVB-S2 Low Density Parity Check Bit Error Rate. | |||||||||||||
| CsatSignalCndisp | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.5 | DisplayString (SIZE (0..32)) | RO | 10.0 | |||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Status: Carrier to Noise Ratio. Example values from LibreNMS test devices
| |||||||||||||
| CsatSignalCnMargin | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.6 | DisplayString (SIZE (0..32)) | RO | 1.6 | |||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Status: Carrier to Noise Ratio Link Margin. Example values from LibreNMS test devices
| |||||||||||||
| CsatSignalLevel | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.7 | DisplayString (SIZE (0..32)) | RO | -40 | |||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Status: Signal Level. Example values from LibreNMS test devices
| |||||||||||||
| CsatSignalSatDishCnMargin | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.8 | DisplayString (SIZE (0..40)) | RO | ||||||||||
column · DisplayString (SIZE (0..40)) · read-only · current Status: SatDish CN Margin in dB Displays the margin in dB to a threshold level at which failure occurs. The range is 0dB to 10dB. | |||||||||||||
| CsatSignalSatDishSigLevel | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.9 | DisplayString (SIZE (0..40)) | RO | ||||||||||
column · DisplayString (SIZE (0..40)) · read-only · current Status: SatDish Signal level( in dBm ) plus some kind of graphical signal level meter on the LCD (the range is -75 dBm to +-20 dBm). | |||||||||||||
| CsatSignalPerDisp | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.10 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Status: DVB-S2 Packet Error Rate. | |||||||||||||
| CsatSignalAfc | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.11 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Status: Tuner Frequency Offset. The range is from -51.0 to 51.0 in steps of 0.1 MHz. | |||||||||||||
| CsatSignalUncorErrCnt | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.12 | DisplayString (SIZE (0..32)) | RO | 42277 | |||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Status: Uncorrected Error Counter. The range is from 0 to 4294967295. Example values from LibreNMS test devices
| |||||||||||||
| CsatSignalCorErrCnt | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.13 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Status: DVB-S Reed-Solomon Corrected Error Counter. | |||||||||||||
| CsatSignalRfLock | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.14 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Status: RF Lock Status.
| |||||||||||||
| CsatSignalDnLkFreq | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.15 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Status: Downlink Frequency in the range of 0.000000 to 15.000000 GHz in steps of 0.000001 GHz. | |||||||||||||
| CsatSignalLbandFreq | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.16 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Status: L-Band Frequency in the range of 950.000 to 2150.000 MHz in steps of 0.001 MHz. | |||||||||||||
| CsatSignalSymbolRate | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.17 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Status: Symbol Rate in the Range of 1.0000 to 45.0000 MegaSym/second in steps of 0.0001 MegaSym/second. | |||||||||||||
| CsatSignalFecRate | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.18 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Status: Forward Error Correction Rate.
| |||||||||||||
| CsatSignalPolarization | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.19 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Status: Signal Polarization.
| |||||||||||||
| CsatSignalModulation | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.20 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Status: Signal Modulation Type.
| |||||||||||||
| CsatSignalIQ | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.21 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Status: Spectrum Inversion.
| |||||||||||||
| CsatSignalLnbPsStatus | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.22 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Status: Low Noise Block Power Supply Status.
| |||||||||||||
| CsatSignalPilots | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.23 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Status: Presence of Pilot Symbols.
| |||||||||||||
| CsatSignalLoSelect | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.24 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Status: LO Select.
| |||||||||||||
| CsatSignalPolar | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.25 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Status: Polarization.
| |||||||||||||
| CsatSignalClearSigErrCnt | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.26 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set this variable to yes( 2 ) to clear signal error counter.
| |||||||||||||
| CsatSignalValidateOrbPosDate | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.27 | DisplayString (SIZE (0..63)) | RO | ||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current Status: Last Orbital Position Validate Date. | |||||||||||||
| CsatSignalValidateOrbPosStat | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.28 | DisplayString (SIZE (0..63)) | RO | ||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current Status: Orbital Position Validation Status. | |||||||||||||
| CsatSignalChScanStatus | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.29 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Channel Scanning Status :Off/Scanning/Done.
| |||||||||||||
| CsatSignalSigLevelRaw | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.30 | DisplayString (SIZE (0..5)) | RO | ||||||||||
column · DisplayString (SIZE (0..5)) · read-only · current Signal Level - RAW Register Value. | |||||||||||||
| CsatSignalP1DStatus | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.31 | DisplayString (SIZE (0..3)) | RO | ||||||||||
column · DisplayString (SIZE (0..3)) · read-only · current P1 DSTATUS. | |||||||||||||
| CsatSignalDvbS2FrameLen | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.32 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current DVB-S2 Frame Length.
| |||||||||||||
| CsatSignalCnMarginRaw | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.33 | DisplayString (SIZE (0..17)) | RO | ||||||||||
column · DisplayString (SIZE (0..17)) · read-only · current C/N Margin - RAW Register Value. | |||||||||||||
| CsatSignalDvbSQpskErrCount | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.34 | DisplayString (SIZE (0..8)) | RO | ||||||||||
column · DisplayString (SIZE (0..8)) · read-only · current DVB-S QPSK Error Count. | |||||||||||||
| CsatSignalDvbS2LdpcErrCount | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.35 | DisplayString (SIZE (0..8)) | RO | ||||||||||
column · DisplayString (SIZE (0..8)) · read-only · current DVB-S2 LPDC Error Count. | |||||||||||||
| CsatSignalPvErrCount | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.36 | DisplayString (SIZE (0..8)) | RO | ||||||||||
column · DisplayString (SIZE (0..8)) · read-only · current DVB-S PV Error Count. | |||||||||||||
| CsatSignalFecSyncStatus | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.37 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current FEC SYNC Status for DVB-S PV Decoder.
| |||||||||||||
| CsatSignalPktErrCount | 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.38 | DisplayString (SIZE (0..10)) | RO | ||||||||||
column · DisplayString (SIZE (0..10)) · read-only · current DVB-S/DVB-S2 Packet Error Count. | |||||||||||||
| TinputStatusTable | 1.3.6.1.4.1.1429.2.2.5.5.3.2 | NA | |||||||||||
table · not-accessible · current Input Status Table. | |||||||||||||
| RinputStatusEntry | 1.3.6.1.4.1.1429.2.2.5.5.3.2.1 | NA | |||||||||||
| CinputStatusIndex | 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.1 | Integer32 (1) | NA | 1 | |||||||||
column · Integer32 (1) · not-accessible · current Status: Index for inputStatus Table. Example values from LibreNMS test devices
| |||||||||||||
| CinputStatusCurInput | 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.2 | INTEGER | RO | 2 | |||||||||
column · INTEGER · read-only · current Status: Current Input for D9865 only.
Example values from LibreNMS test devices
| |||||||||||||
| CinputStatusSatLock | 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.3 | INTEGER | RO | lockplussignal(3) | |||||||||
column · INTEGER · read-only · current Status: Satellite Lock: No Lock/Lock+Sig/Lock-Sig.
Example values from LibreNMS test devices
| |||||||||||||
| CinputStatusMpgIpLock | 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.4 | INTEGER | RO | nolock(1) | |||||||||
column · INTEGER · read-only · current Signal Validity.MPEG over IP Lock.
Example values from LibreNMS test devices
| |||||||||||||
| CinputStatusInputRate | 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.5 | DisplayString (SIZE (0..32)) | RO | 65.32624 | |||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Status: Input Rate in Mega bauds per second ( Mbps ). The range is from 0.000000 to 4294.967295 Mbps in steps of 0.000001 Mbps. Example values from LibreNMS test devices
| |||||||||||||
| CinputStatusNetworkName | 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.6 | DisplayString (SIZE (0..64)) | RO | AMC 11 Transponder 13 | |||||||||
column · DisplayString (SIZE (0..64)) · read-only · current Status: Network Name. Example values from LibreNMS test devices
| |||||||||||||
| CinputStatusNetworkId | 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.7 | DisplayString (SIZE (0..32)) | RO | 8404 | |||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Status: Network ID. Example values from LibreNMS test devices
| |||||||||||||
| CinputStatusTransportId | 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.8 | DisplayString (SIZE (0..32)) | RO | 401 | |||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Status: Transport ID. Example values from LibreNMS test devices
| |||||||||||||
| CinputStatusScramblingMode | 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.9 | INTEGER | RO | des(2) | |||||||||
column · INTEGER · read-only · current Status: Scrambling mode.
Example values from LibreNMS test devices
| |||||||||||||
| CinputStatusTransportError | 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.10 | INTEGER | RO | ok(2) | |||||||||
column · INTEGER · read-only · current Status: Transport Error.
Example values from LibreNMS test devices
| |||||||||||||
| CinputStatusAsiLock | 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.11 | INTEGER | RO | nolock(1) | |||||||||
column · INTEGER · read-only · current Status: ASI Lock.
Example values from LibreNMS test devices
| |||||||||||||
| CinputStatusAsiLinkError | 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.12 | INTEGER | RO | error(3) | |||||||||
column · INTEGER · read-only · current Status: ASI Link Error.
Example values from LibreNMS test devices
| |||||||||||||
| CinputStatusAsiPacketSize | 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.13 | INTEGER | RO | notApplicable(1) | |||||||||
column · INTEGER · read-only · current Status: ASI Packet Size.
Example values from LibreNMS test devices
| |||||||||||||
| CinputStatusLastTuneReason | 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.14 | DisplayString (SIZE (0..16)) | RO | NIT_TS_Change | |||||||||
column · DisplayString (SIZE (0..16)) · read-only · current Status: Reason for the last tune. Example values from LibreNMS test devices
| |||||||||||||
| CinputStatusCurD985xInput | 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.15 | DisplayString (SIZE (0..16)) | RO | RF1 | |||||||||
column · DisplayString (SIZE (0..16)) · read-only · current Status: Current Input for all IRD models. Example values from LibreNMS test devices
| |||||||||||||
| CinputStatusIpiLinkStatus | 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.16 | DisplayString (SIZE (0..16)) | RO | Up | |||||||||
column · DisplayString (SIZE (0..16)) · read-only · current Status: IPI Ethernet Link Status. Example values from LibreNMS test devices
| |||||||||||||
| CinputStatusIpiSignal | 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.17 | DisplayString (SIZE (0..16)) | RO | None | |||||||||
column · DisplayString (SIZE (0..16)) · read-only · current Status: IPI Signal Encapsulation Lock Status. Example values from LibreNMS test devices
| |||||||||||||
| CinputStatusIpiFecLock | 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.18 | DisplayString (SIZE (0..16)) | RO | None | |||||||||
column · DisplayString (SIZE (0..16)) · read-only · current Status: FEC Lock Status. Example values from LibreNMS test devices
| |||||||||||||
| CinputStatusIpiPcrLock | 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.19 | DisplayString (SIZE (0..16)) | RO | No | |||||||||
column · DisplayString (SIZE (0..16)) · read-only · current Status: Indicates if PCR is received without errors or not. Example values from LibreNMS test devices
| |||||||||||||
| CinputStatusIpiDelLatency | 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.20 | DisplayString (SIZE (0..16)) | RO | 110 | |||||||||
column · DisplayString (SIZE (0..16)) · read-only · current Status: Dejitter Buffer Latency. Example values from LibreNMS test devices
| |||||||||||||
| CinputStatusIpiData1SrcIP | 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.21 | IpAddress | RO | 0.0.0.0 | |||||||||
column · IpAddress · read-only · current Status: DATA1 Source IP Selected. Example values from LibreNMS test devices
| |||||||||||||
| CinputStatusIpiData2SrcIP | 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.22 | IpAddress | RO | 0.0.0.0 | |||||||||
column · IpAddress · read-only · current Status: DATA2 Source IP Selected. Example values from LibreNMS test devices
| |||||||||||||
| CinputStatusIpiData1TsType | 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.23 | DisplayString (SIZE (0..16)) | RO | Unk | |||||||||
column · DisplayString (SIZE (0..16)) · read-only · current Status: DATA1 Source Transport Type. Example values from LibreNMS test devices
| |||||||||||||
| CinputStatusIpiData2TsType | 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.24 | DisplayString (SIZE (0..16)) | RO | Unk | |||||||||
column · DisplayString (SIZE (0..16)) · read-only · current Status: DATA2 Source Transport Type. Example values from LibreNMS test devices
| |||||||||||||
| NsiRcvTable | 1.3.6.1.4.1.1429.2.2.5.5.4 | ||||||||||||
| TsiRcvOptionTable | 1.3.6.1.4.1.1429.2.2.5.5.4.1 | NA | |||||||||||
table · not-accessible · current Rcv Option Table. | |||||||||||||
| RsiRcvOptionEntry | 1.3.6.1.4.1.1429.2.2.5.5.4.1.1 | NA | |||||||||||
| CsiRcvOptionInstance | 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.1 | Integer32 (1) | NA | ||||||||||
column · Integer32 (1) · not-accessible · current Instance for siRcvOptionTable. | |||||||||||||
| CsiRcvOptionAcqMode | 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Custom Tuning Mode: Acquisition Mode.
| |||||||||||||
| CsiRcvOptionReacq | 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set this variable to yes( 2 ) to reacquire signal.
| |||||||||||||
| CsiRcvOptionNetID | 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.4 | Integer32 (0..65535) | RW | ||||||||||
column · Integer32 (0..65535) · read-write · current Network ID. | |||||||||||||
| CsiRcvOptionInputSel | 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current UserCfg locks to RF input set by the user and SW Map uses Orbital Position settings to select RF input. It is recommended to set Validate Orbital Position to 'Yes' for SW Mapped option.
| |||||||||||||
| CsiRcvOptionFreqSel | 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Custom Tuning Mode: Frequency Tuning Mode: NIT/Preset.
| |||||||||||||
| CsiRcvOptionServListMode | 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Custom Tuning Mode: Service List Mode: Rigorous/Degraded.
| |||||||||||||
| CsiRcvOptionUseBAT | 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Custom Tuning Mode:Bouquet Association Table in Service List.
| |||||||||||||
| CsiRcvOptionUseNIT | 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Custom Tuning Mode:Network Information Table in Service List.
| |||||||||||||
| CsiRcvOptionUseSDT | 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Custom Tuning Mode:Service Description Table in Service List.
| |||||||||||||
| CsiRcvOptionUsePAT | 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.11 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Custom Tuning Mode:Program Association Table in Service List.
| |||||||||||||
| TsiRcvOptionStatusTable | 1.3.6.1.4.1.1429.2.2.5.5.4.2 | NA | |||||||||||
table · not-accessible · current Rcv Option Status Table. | |||||||||||||
| RsiRcvOptionStatusEntry | 1.3.6.1.4.1.1429.2.2.5.5.4.2.1 | NA | |||||||||||
| CsiRcvOptionStatusInstance | 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.1 | Integer32 (1) | NA | ||||||||||
column · Integer32 (1) · not-accessible · current Instance of siRcv Option Status Table. | |||||||||||||
| CsiRcvOptionLastChanReas | 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Source of the last tuning.
| |||||||||||||
| CsiRcvOptionLastActivated | 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.3 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Last Preset Activated number.The range is from 0 to 64. | |||||||||||||
| CsiRcvOptionStatusFreqSel | 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Status of Frequency tuning mode.
| |||||||||||||
| CsiRcvOptionStatusServListMode | 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Status of Service list mode.
| |||||||||||||
| CsiRcvOptionStatusUseBAT | 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Status of Bouquet Association Table in Service List.
| |||||||||||||
| CsiRcvOptionStatusUseNIT | 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Status of Network Information Table in Service List.
| |||||||||||||
| CsiRcvOptionStatusUseSDT | 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Status of Service Description Table in Service List.
| |||||||||||||
| CsiRcvOptionStatusUsePAT | 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Status of Program Association Table in Service List.
| |||||||||||||
| TsiInfoRxTable | 1.3.6.1.4.1.1429.2.2.5.5.4.3 | NA | |||||||||||
table · not-accessible · current Service information Receive table. | |||||||||||||
| RsiInfoRxEntry | 1.3.6.1.4.1.1429.2.2.5.5.4.3.1 | NA | |||||||||||
row · not-accessible · current Entry for Service Information Received.
| |||||||||||||
| CsiInfoRxInstance | 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.1 | Integer32 (1) | NA | ||||||||||
column · Integer32 (1) · not-accessible · current Instance of SI Info Receive table. | |||||||||||||
| CsiInfoRxIdx | 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.2 | Integer32 (1..65535) | NA | ||||||||||
column · Integer32 (1..65535) · not-accessible · current Service Information Receive Table Index. | |||||||||||||
| CsiInfoRxType | 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Service Information Receive Table Type.
| |||||||||||||
| CsiInfoRxIDExt | 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.4 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Service Information Receive Table ID Extension. The range is from 0 to 4294967295. | |||||||||||||
| CsiInfoRxUid | 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.5 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Service Information Receive Unique ID. The range is from 1 to 32. | |||||||||||||
| CsiInfoRxStatus | 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Service Information Receive Status.
| |||||||||||||
| CsiInfoRxVer | 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.7 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Service Information Version. The range is from 0 to 4294967295. | |||||||||||||
| CsiInfoRxPID | 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.8 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Service Information Program ID. The range is from 0 to 8192. | |||||||||||||
| CsiInfoRxSections | 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.9 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Service Information Number of Sections. The range is from 0 to 4294967295. | |||||||||||||
| TsiInfoTsTable | 1.3.6.1.4.1.1429.2.2.5.5.4.4 | NA | |||||||||||
table · not-accessible · current Transport Stream table. | |||||||||||||
| RsiInfoTsEntry | 1.3.6.1.4.1.1429.2.2.5.5.4.4.1 | NA | |||||||||||
| CsiInfoTsInstance | 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.1 | Integer32 (1) | NA | ||||||||||
column · Integer32 (1) · not-accessible · current Transport Stream Table Instance. | |||||||||||||
| CsiInfoTsIdx | 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.2 | Integer32 (1..256) | NA | ||||||||||
column · Integer32 (1..256) · not-accessible · current Service Information Transport Stream Index. | |||||||||||||
| CsiInfoTsId | 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.3 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Frequency Plan: Service Information Transport Stream ID. The range is from 0 to 4294967295. | |||||||||||||
| CsiInfoTsFreq | 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.4 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Frequency Plan: Service Information Frequency The range is from 0.000000 to 15.000000 GHz in steps of 0.000001 GHz. | |||||||||||||
| CsiInfoTsSymRate | 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.5 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Frequency Plan: Service Information Symbol Rate. The range is from 1.0000 to 45.0000 Megasym/second in steps of 0.0001 Megasym. | |||||||||||||
| CsiInfoTsOrbPosn | 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.6 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Frequency Plan: Service Information Orbital Position. The range is from 0.0 to 360.0 . | |||||||||||||
| CsiInfoTsPolar | 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Frequency Plan: Service Information Polarization.
| |||||||||||||
| CsiInfoTsFEC | 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Frequency Plan: Service Information Forward Error Correction Rate.
| |||||||||||||
| CsiInfoTsModulation | 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Frequency Plan: Service Information Modulation.
| |||||||||||||
| CsiInfoTsOrgNetID | 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.10 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Frequency Plan: Service Information Original Network ID. The range is from 0 to 4294967295. | |||||||||||||
| CsiInfoTsEastWestFlag | 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.11 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Frequency Plan: Service Information East West flag.
| |||||||||||||
| TsiInfoVCInfoTable | 1.3.6.1.4.1.1429.2.2.5.5.4.5 | NA | |||||||||||
table · not-accessible · current VC table. | |||||||||||||
| RsiInfoVCInfoEntry | 1.3.6.1.4.1.1429.2.2.5.5.4.5.1 | NA | |||||||||||
| CsiInfoVCInfoInstance | 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.1 | Integer32 (1) | NA | ||||||||||
column · Integer32 (1) · not-accessible · current Virtual Channel Info table Instance. | |||||||||||||
| CsiInfoVCInfoIdx | 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.2 | Integer32 (1..262144) | NA | ||||||||||
column · Integer32 (1..262144) · not-accessible · current Virtual Channel Info table Index. | |||||||||||||
| CsiInfoVCInfoId | 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.3 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Service Information VC Service ID. The range is from 0 to 4294967295. | |||||||||||||
| CsiInfoVCInfoTxID | 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.4 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Service Information VC Transport Stream ID. The range is from 0 to 4294967295. | |||||||||||||
| CsiInfoVCInfoProgName | 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.5 | DisplayString (SIZE (0..63)) | RO | ||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current Service Information VC Programme Name. | |||||||||||||
| CsiInfoVCInfoPMTPID | 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.6 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Service Information VC Program Map Table Program ID. | |||||||||||||
| CsiInfoVCInfoCHType | 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Service Type:TV service/ Radio service.
| |||||||||||||
| CsiInfoVCInfoECMPID | 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.8 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Service Information VC Entitlement Control Message Program ID. | |||||||||||||
| CsiInfoVCInfoAuthorized | 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Service List: Channel Authorized: Yes/No.
| |||||||||||||