MIB Browser

CISCO-CEF-TC

ciscoSystems
This MIB module defines Textual Conventions and
OBJECT-IDENTITIES for use in documents defining
management information base (MIBs) modules for
managing Cisco Express Forwarding (CEF).
Organization
Cisco Systems, Inc.
Root OID
1.3.6.1.4.1.9.9.493
Last updated
Objects
1
Source
Show full MIB
snmptranslate -m CISCO-CEF-TC -Tp
snmpwalk -v2c -c <community> -m CISCO-CEF-TC <host> 1.3.6.1.4.1.9.9.493

Imports

CISCO-SMIciscoMgmt
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIBits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION

OID tree

NameOIDTypeAccessStatus
IciscoCefTextualConventions1.3.6.1.4.1.9.9.493

Textual conventions

CefAdjLinkType INTEGER

ipv4(1) ipv6(2) mpls(3) raw(4) unknown(5)

Link type for the adjacency. The adjacency link type
identifies protocol stack on neighbour device which will
process packets fed through adjacency.
CefAdjacencySource Bits

arp(3) atmBundle(11) atmPVC(6) atmSVC(7) atmTVC(8) atom(0) cmcc(15) fibLc(19) frMap(5) ipPseudowireAdj(2) ipv6AutoTunnel(18) ipv6IsaTapTunnel(17) ipv6ND(14) ipv6SixtoFourTunnel(16) lec(12) linkRawAdj(1) mpoa(10) multicast(21) nbma(9) nhrp(13) p2pAdj(4) unknown(22) virtual(20)

The mechanism by which the adjacency is learned.
As the mechanism of learning the adjacency can be
multiple (e.g. 'arp' and 'atmPVC'), hence the
value of this object represents the bit mask of
adjacency sources.
CefAdminStatus INTEGER

disabled(2) enabled(1)

Admin status of CEF. The admin status of CEF
may differ from the oper status of CEF depending
upon the success of the admin operation.
CefCCAction INTEGER

ccActionAbort(2) ccActionNone(3) ccActionStart(1)

The action to be performed for the consistency
checkers.

  ccActionStart(1)   :  start the Consistency checker
                        operation.

  ccActionAbort(2)   :  abort the Consistency checker
                        operation. After aborting, the
                        active process must recover.
                        This can take some time, and
                        during this period, the scan
                        cannot be restarted.

  ccActionNone(3)    :  no operation is being performed
                        on consistency checkers.
CefCCStatus INTEGER

ccStatusDone(3) ccStatusIdle(1) ccStatusRunning(2)

The status of consistency checker operation.
The description of each state is given below:

  ccStatusIdle(1)    :  this state signifies that
                        no consistency checker request
                        is being performed.

  ccStatusRunning(2) :  this state signifies that
                        consistency checker request is
                        in progress.

  ccStatusDone(3)     : this state signifies that
                        consistency checker request is
                        over.
CefCCType INTEGER

fullScanFibHwSw(12) fullScanFibLcRp(11) fullScanFibRib(9) fullScanFibRpLc(10) fullScanFibSwHw(13) fullScanRibFib(8) lcDetect(1) scanFibHwSw(6) scanFibLcRp(2) scanFibRib(5) scanFibRpLc(3) scanFibSwHw(7) scanRibFib(4)

Type of the consistency checker.

lcDetect         : This is an active consistency checker
                   which is triggered when a packet cannot
                   be forwarded because the prefix is not
                   in the forwarding table. It Detects
                   missing prefixes on the linecard CEF
                   database by sending the missing prefixes
                   to the RP.

scanFibLcRp      : This is an passive consistency checker
                   which performs a passive scan check of
                   the table on the line card.

                   This consistency checker operates on
                   the line card by examining the FIB table
                   for a configurable time period and sending
                   the next n prefixes to the RP.

scanFibRpLc      : This is an passive consistency checker
                   which performs a passive scan check of
                   RP by examining the FIB table for
                   a configurable period and
                   sending the next n prefixes to the
                   line card.

scanRibFib       : This is an passive consistency checker
                   which compares routing information base
                   (RIB) to the FIB table at a configurable
                   interval and provides the number of
                   entries missing from the FIB table.

scanFibRib       : This is an passive consistency checker
                   which compares FIB Tables to the
                   routing information base (RIB)
                   at a configurable interval and provides
                   the number of entries missing from the
                   FIB table.

scanFibHwSw      : This is an passive consistency checker
                   which compares FIB Tables in hardware
                   to the FIB Tables in RP.

scanFibSwHw      : This is an passive consistency checker
                   which compares FIB Tables in RP
                   to the FIB Tables in hardware.

fullScanRibFib   : This is an active consistency checker
                   which is triggered by Management Station
                   request. It compares the entire routing
                   information base (RIB) to the FIB table
                   and provide the number of entries missing
                    from the FIB Table.

fullScanFibRib   : This is an active consistency checker
                   which is triggered by Management Station
                   request. It compares the FIB table to the
                   routing information base (RIB)
                   and provide the number of entries missing
                   from the FIB Table.

fullScanFibRpLc  : This is an active consistency checker
                   which is triggered by Management Station
                   request. It compares the RP FIB Table
                   with FIB Table on each LC and report
                   inconsistencies.

fullScanFibLcRp  : This is an active consistency checker
                   which is triggered by Management Station
                   request. It compares the Fib Table on LC
                   with FIB table on RP and report
                   inconsistencies.

fullScanFibHwSw  : This is an active consistency checker
                   which is triggered by Management Station
                   request. It compares the Fib Table in
                   hardware with FIB table in RP and report
                   inconsistencies.

fullScanFibSwHw  : This is an active consistency checker
                   which is triggered by Management Station
                   request. It compares the Fib Table in RP
                   with FIB table in hardware and report
                   inconsistencies.
CefFailureReason INTEGER

hwFailure(3) internalError(7) invalidMsgSize(6) keepaliveFailure(4) mallocFailure(2) noMsgBuffer(5) none(1)

Reason of CEF Failure:

none(1)                : no failure

mallocFailure(2)       : memory allocation failed for CEF

hwFailure(3)           : hardware interface failure
                         for CEF

keepaliveFailure(4)    : keepalive was not received from
                         the CEF peer entity

noMsgBuffer(5)         : message buffers were exhausted
                         while preparing IPC message to be
                         sent to the CEF peer entity

invalidMsgSize(6)      : IPC message was received with
                         invalid size from the
                         CEF peer entity

internalError(7)       : Some other internal error was
                         detected for CEF
CefForwardingElementSpecialType INTEGER

discard(4) drop(3) glean(6) illegal(1) noRoute(8) none(9) null(5) punt(2) unresolved(7)

Type of special forwarding element

illegal(1)   : illegal special forwarding element.
               the packet will be dropped.

punt(2)      : the packet will be punted to the
               next switching path

drop(3)      : not supported for Destination IP to next hop
               interface and the packet will be dropped

discard(4)   : the packet is for Destination IP through
               next hop interface and it will be discarded

null(5)      : the packet is for Destination IP to null0,
               it will be dropped

glean(6)     : an attempt will be made to complete the
               encapsulation string through address
               resolution

unResolved(7): unresolved forwarding element.
               the packet will be dropped unconditionally.

noRoute(8)   : no route forwarding element.
               This forwarding element will result
               in rate limited punts to the next
               switching path(to generate ICMP
               no route message)

none(9)      : not a special forwarding element and
               the value of this object should be
               ignored
CefIpVersion INTEGER

ipv4(1) ipv6(2)

The version of CEF IP forwarding.
CefMplsLabelList OCTET STRING (SIZE (0..255))
This contains a list of MPLS Labels,
each separated by the ';' (semi-colon) character.

       MPLS Label values are in accordance with the
       MplsLabel TEXTUAL-CONVENTION defined in the
       MPLS-TC-MIB.

The following is en example containing two MPLS labels:

   4294;100

       An empty string value for this object indicates
       no MPLS Labels in this list.
CefOperStatus INTEGER

down(2) up(1)

Operational status of CEF.
CefPathType INTEGER

adjacencyPrefix(7) attachedHost(4) attachedNexthop(5) attachedPrefix(3) connectedPrefix(2) receive(1) recursiveNexthop(6) specialPrefix(8) unknown(9)

Type of the CEF Path.
  receive(1)          : path for the address
                        configured on any of the
                        interface in the device.

  connectedPrefix(2)  : connected prefix path

  attachedPrefix(3)   : attached prefix path

  attachedHost(4)     : attached host path

  attachedNexthop(5)  : attached next hop path

  recursiveNexthop(6) : recursive next hop path

  adjacencyPrefix(7)  : adjacency prefix path

  specialPrefix(8)    : special prefix path

  unknown(9):         : unknown  path
.
CefPrefixSearchState INTEGER

matchFound(2) noMatchFound(3) running(1)

The state of prefix search operation.
The description of each state is given below:

  running(1)      : this state signifies that a prefix
                    search request is running.

  matchFound(2)   : this state signifies that a prefix
                    search request is completed and a prefix
                    match has been found.

  noMatchFound(3) : this state signifies that a prefix
                    search request is completed and a prefix
                    match has not been found.

Used by