CISCO-CAT6K-CROSSBAR-MIB
ciscoSystemsThe Catalyst 6000 Crossbar MIB provides instrumentation for configuration and operation of the crossbar switching fabric module, and additional functionalities for switching bus and internal bus, etc.
snmptranslate -m CISCO-CAT6K-CROSSBAR-MIB -Tpsnmpwalk -v2c -c <community> -m CISCO-CAT6K-CROSSBAR-MIB <host> 1.3.6.1.4.1.9.9.217Imports
| CISCO-QOS-PIB-MIB | Percent |
|---|---|
| CISCO-SMI | ciscoMgmt |
| ENTITY-MIB | entPhysicalDescr, entPhysicalIndex, entPhysicalName, entPhysicalVendorType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IciscoCat6kCrossbarMIB | 1.3.6.1.4.1.9.9.217 | |||
identity The Catalyst 6000 Crossbar MIB provides instrumentation for configuration and operation of the crossbar switching fabric module, and additional functionalities for switching bus and internal bus, etc. | ||||
| NciscoCat6kXbarMIBNotifs | 1.3.6.1.4.1.9.9.217.0 | |||
| !cc6kxbarSwBusStatusChangeNotif | 1.3.6.1.4.1.9.9.217.0.1 | |||
notification · current A cc6kxbarSwBusStatusChangeNotif notification is sent by the device when there is change in switching status of the switching bus as monitored by cc6kxbarSwBusSwitchingStatus. | ||||
| !cc6kxbarIntBusCRCErrExcdNotif | 1.3.6.1.4.1.9.9.217.0.2 | |||
notification · current A cc6kxbarIntBusCRCThreshExcdNotif notification is sent by the system when the system has detected that the internal bus CRC error on a physical entity (such as a module) as specified by entPhysicalName has exceeded the fatal threshold.
| ||||
| !cc6kxbarIntBusCRCErrRcvrdNotif | 1.3.6.1.4.1.9.9.217.0.3 | |||
notification · current A cc6kxbarIntBusCRCErrRcvrdNotif notification is sent by the system when the system has recovered as the internal bus CRC error on a physical entity (such as a module) as specified by entPhysicalName has fallen below the normal threshold.
| ||||
| !cc6kxbarFlowCtrlBusThrExcdNotif | 1.3.6.1.4.1.9.9.217.0.4 | |||
notification · current A cc6kxbarFlowCtrlBusThrExcdNotif notification is sent by the system when the system detects the first occurrence of the system bus flow control FIFO threshold exceeding on a physical entity (such as a module) over the system allowed limit when the object value of cc6kxbarFlowCtrlBusFIFOThrMode is 'auto'.
| ||||
| !cc6kxbarTMSwBusUtilAboveNotif | 1.3.6.1.4.1.9.9.217.0.5 | |||
notification · current This notification is sent when the switching bus traffic utilization has risen above the configured threshold (as specified by cc6kxbarTMSwBusUtilThreshold), or has kept staying above the configured threshold at a logging interval (as specified by cc6kxbarTMSwBusUtilLogInterval). The varbind entPhysicalDescr specifies the physical entity (such as chassis) for which the cc6kxbarTMSwBusUtilAboveNotif is sent. | ||||
| !cc6kxbarTMSwBusUtilBelowNotif | 1.3.6.1.4.1.9.9.217.0.6 | |||
notification · current This notification is sent when the switching bus traffic utilization has fallen below the configured threshold (as specified by cc6kxbarTMSwBusUtilThreshold). The varbind entPhysicalDescr specifies the physical entity (such as chassis) for which the cc6kxbarTMSwBusUtilBelowNotif is sent. | ||||
| !cc6kxbarTMChUtilAboveNotif | 1.3.6.1.4.1.9.9.217.0.7 | |||
notification · current This notification is sent when the traffic utilization on a fabric channel for a given traffic direction has risen above its corresponding configured threshold (as specified by cc6kxbarTMChUtilThreshold), or has kept staying above the configured threshold at a logging interval (as specified by cc6kxbarTMChUtilLogInterval). The varbind entPhysicalDescr specifies the physical entity (such as chassis) for which the cc6kxbarTMChUtilAboveNotif is sent. | ||||
| !cc6kxbarTMChUtilBelowNotif | 1.3.6.1.4.1.9.9.217.0.8 | |||
notification · current This notification is sent when the traffic utilization on a fabric channel for a given traffic direction has fallen below its corresponding configured threshold (as specified by cc6kxbarTMChUtilThreshold). The varbind entPhysicalDescr specifies the physical entity (such as chassis) for which the cc6kxbarTMChUtilBelowNotif is sent. | ||||
| NciscoCat6kXbarMIBObjects | 1.3.6.1.4.1.9.9.217.1 | |||
| Ncc6kxbarConfiguration | 1.3.6.1.4.1.9.9.217.1.1 | |||
| Scc6kxbarFallbackMode | 1.3.6.1.4.1.9.9.217.1.1.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current cc6kxbarFallbackMode controls system fallback to bus-mode
after loss of switching fabric module.
'true' - When the last fabric card is removed
system will adjust the supervisor and
line cards switching mode automatically without
resetting the system. With this feature enabled,
the switch might lose traffic while it's
changing the switching mode.
'false' - All the ports in the system will be
disabled when the last fabric card is removed. | ||||
| Scc6kxbarBusOnlyModeAllowed | 1.3.6.1.4.1.9.9.217.1.1.2 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether bus mode is administratively enabled on the device or not. | ||||
| Scc6kxbarTruncatedModeAllowed | 1.3.6.1.4.1.9.9.217.1.1.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether truncated mode is administratively enabled on the device or not. | ||||
| Scc6kxbarMinFabricPresent | 1.3.6.1.4.1.9.9.217.1.1.4 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current This object indicates the minimum number of switching fabric capable modules to be present in the system, for any switching fabric capable module to be in 'crossbarmode' indicated by cc6kxbarModuleModeSwitchingMode, when cc6kxbarTruncatedModeOper is 'false'. | ||||
| Tcc6kxbarLcdBannerTable | 1.3.6.1.4.1.9.9.217.1.1.5 | NA | ||
table · not-accessible · current cc6kxbarLcdBannerTable configures the Lcd banner of the fabric module. | ||||
| Rcc6kxbarLcdBannerEntry | 1.3.6.1.4.1.9.9.217.1.1.5.1 | NA | ||
row · not-accessible · current An entry in cc6kxbarLcdBannerTable. Entries are created by the agent based on the size of the lcd banner. | ||||
| Ccc6kxbarLcdBannerIndex | 1.3.6.1.4.1.9.9.217.1.1.5.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Object which specifies a unique entry in the table. | ||||
| Ccc6kxbarLcdBannerBanner | 1.3.6.1.4.1.9.9.217.1.1.5.1.2 | DisplayString | RW | |
column · DisplayString · read-write · current Message that would be displayed on the fabric card LCD. The size of cc6kxbarLcdBannerBanner should be less than or equal to the cc6kxbarLcdBannerMaxSize value. | ||||
| Ccc6kxbarLcdBannerMaxSize | 1.3.6.1.4.1.9.9.217.1.1.5.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Maximum size of the associated cc6kxbarLcdBannerBanner object. | ||||
| Scc6kxbarTruncatedModeOper | 1.3.6.1.4.1.9.9.217.1.1.6 | TruthValue | RO | |
scalar · TruthValue · read-only · current Indicates if the truncated mode is
operationally enabled on the device or not.
'true' - With the fabric module present in the system,
cc6kxbarModuleModeSwitchingMode will be
'crossbarmode' for all the fabric capable
modules.
'false'- With the cc6kxbarMinFabricPresent fabric capable
modules and the fabric module present in the system,
cc6kxbarModuleModeSwitchingMode
will be 'crossbarmode' for fabric capable modules. | ||||
| Scc6kxbarDcefOnlyModeAllowed | 1.3.6.1.4.1.9.9.217.1.1.7 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether the dcef mode is enabled on the standby
supervisor or not.
'true' - Setting cc6kxbarDcefOnlyModeAllowed to 'true'
makes the cc6kxbarModuleModeSwitchingMode of
all the active modules to 'dcefmode'.
With the active fabric module present in the system,
with the switch being in stateful switchover mode,
with all the cards that has no distributed Cisco
Express forwarding switching support being
powered down and on some platforms with standby
supervisor ports being shutdown, changing
cc6kxbarDcefOnlyModeAllowed to 'true' will make the
standby supervisor module reloaded and booted up
as distributed forwarding module.
'false'- Setting cc6kxbarDcefOnlyModeAllowed to 'false'
makes the cc6kxbarModuleModeSwitchingMode of the
standby supervisor module to the default value.
Changing cc6kxbarDcefOnlyModeAllowed to 'false'
will make the standby supervisor reloaded and booted
up with the default cc6kxbarModuleModeSwitchingMode. | ||||
| Scc6kxbarForceBusMode | 1.3.6.1.4.1.9.9.217.1.1.8 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether some affected modules are forced to be in
'busmode' or not.
'true' - Setting cc6kxbarForceBusMode to 'true' makes the
cc6kxbarModuleModeSwitchingMode of all
the affected modules to 'busmode'. Changing the
cc6kxbarForceBusMode to 'true' will make all the
affected modules reloaded and booted up as
non fabric capable modules.
'false'- Setting cc6kxbarForceBusMode to 'false' makes the
cc6kxbarModuleModeSwitchingMode of all the affected
modules to the default value. Changing
cc6kxbarForceBusMode to 'false' will make all the
affected modules reloaded and booted up with the
default cc6kxbarModuleModeSwitchingMode. | ||||
| Scc6kxbarBusOnlyModeOper | 1.3.6.1.4.1.9.9.217.1.1.9 | TruthValue | RO | |
scalar · TruthValue · read-only · current Indicates if the bus mode is operationally enabled on the
device or not.
'true' - Modules are allowed to run in 'busmode'.
'false' - None of the modules are allowed to run in 'busmode'
i.e., All the non-fabric capable modules will
be powered off. Absence of fabric module results
in all the fabric capable modules being powered
off. | ||||
| Ncc6kxbarStatus | 1.3.6.1.4.1.9.9.217.1.2 | |||
| Scc6kxbarFabricActiveSlot | 1.3.6.1.4.1.9.9.217.1.2.1 | ModuleSlotNumber | RO | |
scalar · ModuleSlotNumber · read-only · current cc6kxbarFabricActiveSlot indicates the slot number of the active switching fabric module. A value of zero indicates that the active switching fabric module is either powered down or not present in the chassis. | ||||
| Scc6kxbarFabricBackupSlot | 1.3.6.1.4.1.9.9.217.1.2.2 | ModuleSlotNumber | RO | |
scalar · ModuleSlotNumber · read-only · current cc6kxbarFabricBackupSlot indicates the slot number of the backup switching fabric module. A value of zero indicates that the backup switching fabric module is either powered down or not present in the chassis. | ||||
| Tcc6kxbarModuleModeTable | 1.3.6.1.4.1.9.9.217.1.2.3 | NA | ||
table · not-accessible · current cc6kxbarModuleModeTable indicates the switching mode of each module in the system. | ||||
| Rcc6kxbarModuleModeEntry | 1.3.6.1.4.1.9.9.217.1.2.3.1 | NA | ||
row · not-accessible · current An entry in cc6kxbarModuleModeTable. The agent creates an entry when a non switching fabric module is inserted in the chassis. The agent destroys an entry when a non switching fabric module is power down or reset or removed from the chassis. | ||||
| Ccc6kxbarModuleModeModule | 1.3.6.1.4.1.9.9.217.1.2.3.1.1 | ModuleSlotNumber | NA | |
column · ModuleSlotNumber · not-accessible · current The module slot number. | ||||
| Ccc6kxbarModuleModeSwitchingMode | 1.3.6.1.4.1.9.9.217.1.2.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current cc6kxbarModuleModeSwitchingMode indicates switching mode
of the cc6kxbarModuleModeModule.
'busmode' - Modules in this mode don't use fabric.
Backplane is used for both lookup and data
forwarding.
'crossbarmode' - Modules in this mode use backplane
for forwarding decision and fabric for data
forwarding
'dcefmode' - Modules in this mode use fabric for data
forwarding and local forwarding is enabled.
| ||||
| Tcc6kxbarModuleChannelTable | 1.3.6.1.4.1.9.9.217.1.2.4 | NA | ||
table · not-accessible · current cc6kxbarModuleChannelTable shows the operational status of fabric channels. This table will be instantiated only when cc6kxbarFabricActiveSlot has a valid value other than zero. | ||||
| Rcc6kxbarModuleChannelEntry | 1.3.6.1.4.1.9.9.217.1.2.4.1 | NA | ||
row · not-accessible · current An entry in cc6kxbarModuleChannelTable. | ||||
| Ccc6kxbarModuleChannelModule | 1.3.6.1.4.1.9.9.217.1.2.4.1.1 | ModuleSlotNumber | NA | |
column · ModuleSlotNumber · not-accessible · current The module slot number. | ||||
| Ccc6kxbarModuleChannelChannel | 1.3.6.1.4.1.9.9.217.1.2.4.1.2 | FabricChannelNumber | NA | |
column · FabricChannelNumber · not-accessible · current Fabric channel number of the cc6kxbarModuleChannelModule. | ||||
| Ccc6kxbarModuleChannelModStatus | 1.3.6.1.4.1.9.9.217.1.2.4.1.3 | ChannelStatus | RO | |
column · ChannelStatus · read-only · current The status of the fabric channel at the cc6kxbarModuleChannelModule. | ||||
| Ccc6kxbarModuleChannelFabStatus | 1.3.6.1.4.1.9.9.217.1.2.4.1.4 | ChannelStatus | RO | |
column · ChannelStatus · read-only · current The status of the fabric channel at the cc6kxbarFabricActiveSlot. | ||||
| Ccc6kxbarModuleChannelSpeed | 1.3.6.1.4.1.9.9.217.1.2.4.1.5 | Gauge32 | RO | |
column · Gauge32 · read-only · current The speed in mega bits per second of the cc6kxbarModuleChannelChannel for cc6kxbarModuleChannelModule. | ||||
| Ncc6kxbarStatistics | 1.3.6.1.4.1.9.9.217.1.3 | |||
| Tcc6kxbarStatisticsTable | 1.3.6.1.4.1.9.9.217.1.3.1 | NA | ||
table · not-accessible · current cc6kxbarStatisticsTable gives the fabric channel counters and utilization information. This table will be instantiated when cc6kxbarFabricActiveSlot has a valid value other than zero. | ||||
| Rcc6kxbarStatisticsEntry | 1.3.6.1.4.1.9.9.217.1.3.1.1 | NA | ||
row · not-accessible · current An entry in cc6kxbarStatisticsTable. | ||||
| Ccc6kxbarStatisticsModule | 1.3.6.1.4.1.9.9.217.1.3.1.1.1 | ModuleSlotNumber | NA | |
column · ModuleSlotNumber · not-accessible · current The module slot number. | ||||
| Ccc6kxbarStatisticsChannel | 1.3.6.1.4.1.9.9.217.1.3.1.1.2 | FabricChannelNumber | NA | |
column · FabricChannelNumber · not-accessible · current Fabric channel number associated with the cc6kxbarStatisticsModule. | ||||
| Ccc6kxbarStatisticsInErrors | 1.3.6.1.4.1.9.9.217.1.3.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of error packets received on cc6kxbarStatisticsChannel for cc6kxbarStatisticsModule since this entry was last initialized. | ||||
| Ccc6kxbarStatisticsOutErrors | 1.3.6.1.4.1.9.9.217.1.3.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of error packets transmitted on cc6kxbarStatisticsModule through the cc6kxbarStatisticsChannel since this entry was last initialized. | ||||
| Ccc6kxbarStatisticsOutDropped | 1.3.6.1.4.1.9.9.217.1.3.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of dropped packets transmitted on the cc6kxbarStatisticsChannel for cc6kxbarStatisticsModule since this entry was last initialized. | ||||
| Ccc6kxbarStatisticsInUtil | 1.3.6.1.4.1.9.9.217.1.3.1.1.6 | Percent | RO | |
column · Percent · read-only · current Input utilization of the cc6kxbarStatisticsChannel for cc6kxbarStatisticsModule. | ||||
| Ccc6kxbarStatisticsOutUtil | 1.3.6.1.4.1.9.9.217.1.3.1.1.7 | Percent | RO | |
column · Percent · read-only · current Output utilization of the cc6kxbarStatisticsChannel for cc6kxbarStatisticsModule. | ||||
| Ccc6kxbarStatisticsPeakInUtil | 1.3.6.1.4.1.9.9.217.1.3.1.1.8 | Percent | RO | |
column · Percent · read-only · current Indicates the peak value of cc6kxbarStatisticsInUtil of the cc6kxbarStatisticsChannel for cc6kxbarStatisticsModule. | ||||
| Ccc6kxbarStatisticsPeakTmInUtil | 1.3.6.1.4.1.9.9.217.1.3.1.1.9 | DateAndTime | RO | |
column · DateAndTime · read-only · current Indicates the time of most recent change in the corresponding instance value of cc6kxbarStatisticsPeakInUtil. This object contains value 0x0000010100000000 when the corresponding instance value of cc6kxbarStatisticsPeakInUtil is '0'. | ||||
| Ccc6kxbarStatisticsPeakOutUtil | 1.3.6.1.4.1.9.9.217.1.3.1.1.10 | Percent | RO | |
column · Percent · read-only · current Indicates the peak value of cc6kxbarStatisticsOutUtil of the cc6kxbarStatisticsChannel for cc6kxbarStatisticsModule. | ||||
| Ccc6kxbarStatisticsPeakTmOutUtil | 1.3.6.1.4.1.9.9.217.1.3.1.1.11 | DateAndTime | RO | |
column · DateAndTime · read-only · current Indicates the time of most recent change in the corresponding instance value of cc6kxbarStatisticsPeakOutUtil. This object contains value 0x0000010100000000 when the corresponding instance value of cc6kxbarStatisticsPeakOutUtil is '0'. | ||||
| Ccc6kxbarStatisticsLbusDrops | 1.3.6.1.4.1.9.9.217.1.3.1.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current This object indicates the number of packets that have been deterministically dropped due to the threshold on the local bus FIFO, errors and exception conditions. | ||||
| Tcc6kxbarErrorTable | 1.3.6.1.4.1.9.9.217.1.3.2 | NA | ||
table · not-accessible · current cc6kxbarErrorTable provides the fabric channel error information. This table will be instantiated only when cc6kxbarFabricActiveSlot has a valid value other than zero. | ||||
| Rcc6kxbarErrorEntry | 1.3.6.1.4.1.9.9.217.1.3.2.1 | NA | ||
row · not-accessible · current An entry in cc6kxbarErrorTable for a specific fabric channel on a specific module. | ||||
| Ccc6kxbarErrorModule | 1.3.6.1.4.1.9.9.217.1.3.2.1.1 | ModuleSlotNumber | NA | |
column · ModuleSlotNumber · not-accessible · current The module slot number. | ||||
| Ccc6kxbarErrorChannel | 1.3.6.1.4.1.9.9.217.1.3.2.1.2 | FabricChannelNumber | NA | |
column · FabricChannelNumber · not-accessible · current Fabric channel number associated with the cc6kxbarErrorModule. | ||||
| Ccc6kxbarErrorModuleCrc | 1.3.6.1.4.1.9.9.217.1.3.2.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current Indicates the total number of CRC error packets for the cc6kxbarErrorChannel of the cc6kxbarErrorModule. | ||||
| Ccc6kxbarErrorModuleHbeat | 1.3.6.1.4.1.9.9.217.1.3.2.1.4 | Gauge32 | RO | |
column · Gauge32 · read-only · current Indicates the total number of heartbeat misses detected for the cc6kxbarErrorChannel of the cc6kxbarErrorModule. | ||||
| Ccc6kxbarErrorModuleSync | 1.3.6.1.4.1.9.9.217.1.3.2.1.5 | Gauge32 | RO | |
column · Gauge32 · read-only · current Indicates the total number of times cc6kxbarErrorModule could not sync to the active switching fabric module. | ||||
| Ccc6kxbarErrorModuleDDRSync | 1.3.6.1.4.1.9.9.217.1.3.2.1.6 | Gauge32 | RO | |
column · Gauge32 · read-only · current Indicates the total number of DDR(Double Data Rate) channel sync errors for the cc6kxbarErrorChannel of the cc6kxbarErrorModule. | ||||
| Ccc6kxbarErrorChannelSync | 1.3.6.1.4.1.9.9.217.1.3.2.1.7 | Gauge32 | RO | |
column · Gauge32 · read-only · current Indicates the total number of sync errors received at cc6kxbarErrorChannel. | ||||
| Ccc6kxbarErrorChannelBuffer | 1.3.6.1.4.1.9.9.217.1.3.2.1.8 | Gauge32 | RO | |
column · Gauge32 · read-only · current Indicates the total number of times the memory buffer for cc6kxbarErrorChannel of the cc6kxbarErrorModule is full. | ||||
| Ccc6kxbarErrorChannelTimeout | 1.3.6.1.4.1.9.9.217.1.3.2.1.9 | Gauge32 | RO | |
column · Gauge32 · read-only · current Indicates the total number of timeouts for input from the cc6kxbarErrorChannel of the cc6kxbarErrorModule. | ||||
| Ncc6kxbarSwBusObjects | 1.3.6.1.4.1.9.9.217.1.4 | |||
| Scc6kxbarSwBusSwitchingStatus | 1.3.6.1.4.1.9.9.217.1.4.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Indicates the current switching status of the
switching bus on the system.
normal -- the switching bus is under normal
packet switching operation.
stalled -- the switching bus has stopped packet
switching but is still attached to
the system, i.e., the switching bus
is stalled.
isolated -- the switching bus has stopped packet
switching and is detached from
the system, i.e., the switching bus
is isolated.
The object is only instantiated on systems which
support switching bus switching detection feature.
| ||||
| Scc6kxbarSwBusFailureDuration | 1.3.6.1.4.1.9.9.217.1.4.2 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Indicates the failure duration of the switching bus since the switching bus has transitioned out of the normal(1) state as monitored by cc6kxbarSwBusSwitchingStatus. If the object value of cc6kxbarSwBusSwitchingStatus is normal(1), then the object value of cc6kxbarSwBusFailureDuration should be zero. The object is only instantiated on systems which support switching bus switching detection feature.
| ||||
| Scc6kxbarSwBusNotifEnable | 1.3.6.1.4.1.9.9.217.1.4.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether or not the notification cc6kxbarSwBusStatusChangeNotif should be generated when there is change in the switching status of the switching bus as monitored by cc6kxbarSwBusSwitchingStatus. The object is only instantiated on systems which support switching bus switching detection feature. | ||||
| Scc6kxbarSwBusUtilization | 1.3.6.1.4.1.9.9.217.1.4.4 | Percent | RO | |
scalar · Percent · read-only · current Indicates the percentage of bandwidth utilization of the switching bus. | ||||
| Scc6kxbarSwBusPeakUtilization | 1.3.6.1.4.1.9.9.217.1.4.5 | Percent | RO | |
scalar · Percent · read-only · current Indicates the peak percentage value of bandwidth utilization of the switching bus since the system started. | ||||
| Scc6kxbarSwBusPeakTimeUtil | 1.3.6.1.4.1.9.9.217.1.4.6 | DateAndTime | RO | |
scalar · DateAndTime · read-only · current Indicates the time at which the peak percentage value of bandwidth utilization of the switching bus value occurred. | ||||
| Ncc6kxbarIntBusObjects | 1.3.6.1.4.1.9.9.217.1.5 | |||
| Scc6kxbarIntBusNotifEnable | 1.3.6.1.4.1.9.9.217.1.5.1 | Bits | RW | |
scalar · Bits · read-write · current Indicates whether the generation of a specified
notification for internal bus is enabled or not.
If a bit corresponding to a notification is set to
1, then that notification can be generated.
intBusCRCErrExcd -- the cc6kxbarIntBusCRCErrExcdNotif
notification.
intBusCRCErrRcvrd -- the cc6kxbarIntBusCRCErrRcvrdNotif
notification.
| ||||
| Tcc6kxbarIntBusCRCErrTable | 1.3.6.1.4.1.9.9.217.1.5.2 | NA | ||
table · not-accessible · current A table containing internal bus CRC error information on a list of physical entities (such as modules). | ||||
| Rcc6kxbarIntBusCRCErrEntry | 1.3.6.1.4.1.9.9.217.1.5.2.1 | NA | ||
row · not-accessible · current An entry containing internal bus CRC error information on a physical entity (such as a module).
| ||||
| Ccc6kxbarIntBusCRCErrExcdStatus | 1.3.6.1.4.1.9.9.217.1.5.2.1.1 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates whether the internal bus CRC error on a physical entity is currently exceeding the fatal threshold or not. | ||||
| Ccc6kxbarIntBusCRCErrExcdCount | 1.3.6.1.4.1.9.9.217.1.5.2.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicates the number of times the internal bus CRC error on a physical entity has exceeded the fatal threshold. | ||||
| Ncc6kxbarFlowCtrlObjects | 1.3.6.1.4.1.9.9.217.1.6 | |||
| Scc6kxbarFlowCtrlNotifEnable | 1.3.6.1.4.1.9.9.217.1.6.1 | Bits | RW | |
scalar · Bits · read-write · current Specifies whether the generation of a specified
notification for flow control feature is enabled or
not. If a bit corresponding to a notification is set
to one, then that notification can be generated.
busThreshExcd -- the cc6kxbarFlowCtrlBusThrExcdNotif
notification.
| ||||
| Scc6kxbarFlowCtrlBusFIFOThrMode | 1.3.6.1.4.1.9.9.217.1.6.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specifies the mode configuration of the system bus
flow control FIFO threshold.
off -- the flow control FIFO threshold is set to the
original value defined by the system.
on -- the flow control FIFO threshold is set to the
lower value defined by the system.
auto -- the system starts monitoring the system bus
flow control FIFO threshold and will change the
flow control FIFO threshold from the original
value to the lower value when the system detects
the first occurrence of the threshold exceeding
on a physical entity (such as a module) over
the system allowed limit.
| ||||
| Scc6kxbarFlowCtrlBusFIFOThrValue | 1.3.6.1.4.1.9.9.217.1.6.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Indicates the current value of the system bus flow control FIFO threshold, whether it is the original value or the lower value.
| ||||
| Scc6kxbarFlowCtrlBusFIFOTransTime | 1.3.6.1.4.1.9.9.217.1.6.4 | TimeStamp | RO | |
scalar · TimeStamp · read-only · current Indicates the value of sysUpTime at the time that the system bus flow control FIFO threshold is transitioned to lower value when the object value of cc6kxbarFlowCtrlBusFIFOThrValue is 'lower'. This object will take on the value of zero when the object value of cc6kxbarFlowCtrlBusFIFOThrValue is 'original'. | ||||
| Ncc6kxbarSystemCapacityObjects | 1.3.6.1.4.1.9.9.217.1.7 | |||
| Scc6kxbarSysCapPfcOperMode | 1.3.6.1.4.1.9.9.217.1.7.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Indicates the operating mode of the policy feature card (PFC). unknown -- unknown. pfc3a -- Policy feature card 3A. pfc3b -- Policy feature card 3B. pfc3bxl -- Policy feature card 3B XL. pfc3cst1 -- Policy feature card 3C ST1. pfc3cxlst1 -- Policy feature card 3C XL ST1. pfc3c -- Policy feature card 3C. pfc3cxl -- Policy feature card 3C XL. pfc4 -- Policy feature card 4. pfc4xl -- Policy feature card 4 XL. pfc4xxl -- Policy feature card 4 XXL. pfc4lite -- Policy feature card 4 Lite.
| ||||
| Tcc6kxbarSysCapSwitchResTable | 1.3.6.1.4.1.9.9.217.1.7.2 | NA | ||
table · not-accessible · current A cc6kxbarSysCapSwitchResTable entry lists the capacity information of the switching resources for ENTITY-MIB entPhysicalTable entries of manageable components with type entPhysicalClass module(9). | ||||
| Rcc6kxbarSysCapSwitchResEntry | 1.3.6.1.4.1.9.9.217.1.7.2.1 | NA | ||
row · not-accessible · current A cc6kxbarSysCapSwitchResEntry entry lists the capacity information of the switching resources for ENTITY-MIB entPhysicalTable entries of manageable components with type entPhysicalClass module(9). Entries are created by the agent at the system power-up or module insertion. Entries are deleted by the agent upon module removal.
| ||||
| Ccc6kxbarSysCapSwitchResSeries | 1.3.6.1.4.1.9.9.217.1.7.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the module series for traffic forwarding options. unknown -- unknown. supervisor -- supervisor module. classic -- classic module. fabric -- fabric module. dcef720 -- dCEF720 module. cef720 -- CEF720 module. dcef256 -- dCEF256 module. cef256 -- CEF256 module.
| ||||
| Ccc6kxbarSysCapSwitchResCefMode | 1.3.6.1.4.1.9.9.217.1.7.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the Cisco Express Forwarding (CEF) mode of the module. notApplicable -- not applicable for this module. dcef -- distributed CEF. cef -- CEF.
| ||||
| Ncc6kxbarErrorRecoveryObjects | 1.3.6.1.4.1.9.9.217.1.8 | |||
| Scc6kxbarErrRcvryThreshLink | 1.3.6.1.4.1.9.9.217.1.8.1 | Unsigned32 (1..4294967295) | RW | |
scalar · Unsigned32 (1..4294967295) · read-write · current Specifies the threshold on fabric link errors occurring in a channel for the fabric error recovery feature. | ||||
| Scc6kxbarErrRcvryThreshPersLink | 1.3.6.1.4.1.9.9.217.1.8.2 | Unsigned32 (1..4294967295) | RW | |
scalar · Unsigned32 (1..4294967295) · read-write · current Specifies the threshold on persistent fabric link errors occurring in a channel for the fabric error recovery feature. | ||||
| Scc6kxbarErrRcvrySwitchoverEnable | 1.3.6.1.4.1.9.9.217.1.8.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current Specifies whether the switchover to the standby fabric module is enabled or not on the detection of excessive fabric link errors occurring in a channel for the fabric error recovery feature. | ||||
| Scc6kxbarErrRcvryPersLinkResync | 1.3.6.1.4.1.9.9.217.1.8.4 | TruthValue | RW | |
scalar · TruthValue · read-write · current Specifies whether the system will resync the channel or not on the detection of excessive persistent fabric link errors in a channel for the fabric error recovery feature. | ||||
| Scc6kxbarErrRcvryChResyncCount | 1.3.6.1.4.1.9.9.217.1.8.5 | Unsigned32 (1..4294967295) | RW | |
scalar · Unsigned32 (1..4294967295) · read-write · current Specifies the consecutive number of times of channel resync within the time interval as specified by cc6kxbarErrRcvryChResyncInterval, over which the channel resync is considered as failure for the fabric error recovery feature. | ||||
| Scc6kxbarErrRcvryChResyncInterval | 1.3.6.1.4.1.9.9.217.1.8.6 | Unsigned32 (1..4294967295) | RW | |
scalar · Unsigned32 (1..4294967295) · read-write · current Specifies the time interval for the consecutive counting of channel resync for the fabric error recovery feature.
| ||||
| Ncc6kxbarTrafficMonitorObjects | 1.3.6.1.4.1.9.9.217.1.9 | |||
| Ncc6kxbarTrafficMonitorSwBusObjects | 1.3.6.1.4.1.9.9.217.1.9.1 | |||
| Scc6kxbarTMSwBusUtilEnable | 1.3.6.1.4.1.9.9.217.1.9.1.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current Specifies whether the traffic monitor feature is enabled on the switching bus or not. | ||||
| Scc6kxbarTMSwBusUtilInterval | 1.3.6.1.4.1.9.9.217.1.9.1.2 | Unsigned32 (1..4294967295) | RW | |
scalar · Unsigned32 (1..4294967295) · read-write · current Specifies the interval at the end of which the switching bus traffic utilization is compared against cc6kxbarTMSwBusUtilThreshold.
| ||||
| Scc6kxbarTMSwBusUtilThreshold | 1.3.6.1.4.1.9.9.217.1.9.1.3 | Percent | RW | |
scalar · Percent · read-write · current Specifies the threshold of the switching bus traffic utilization. | ||||
| Scc6kxbarTMSwBusUtilLogCount | 1.3.6.1.4.1.9.9.217.1.9.1.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current Indicates the number of times the following events are logged for the switching bus: 1. the switching bus traffic utilization has risen above the configured threshold (as specified by cc6kxbarTMSwBusUtilThreshold), or has kept staying above the configured threshold at a logging interval (as specified by cc6kxbarTMSwBusUtilLogInterval). 2. the switching bus traffic utilization has fallen below the configured threshold. | ||||
| Scc6kxbarTMSwBusUtilLastLogTime | 1.3.6.1.4.1.9.9.217.1.9.1.5 | DateAndTime | RO | |
scalar · DateAndTime · read-only · current Indicates the last logging time of the events as counted in cc6kxbarTMSwBusUtilLogCount. This object will contain 0-1-1,00:00:00.0 when the value of cc6kxbarTMSwBusUtilLogCount is zero. | ||||
| Scc6kxbarTMSwBusUtilLogInterval | 1.3.6.1.4.1.9.9.217.1.9.1.6 | Unsigned32 (1..4294967295) | RW | |
scalar · Unsigned32 (1..4294967295) · read-write · current Specifies the logging interval if the switching bus traffic utilization keeps staying above the cc6kxbarTMSwBusUtilThreshold.
| ||||
| Scc6kxbarTMSwBusUtilUtilization | 1.3.6.1.4.1.9.9.217.1.9.1.7 | Percent | AN | |
scalar · Percent · accessible-for-notify · current The switching bus traffic utilization included in the notification currently being sent. | ||||
| Scc6kxbarTMSwBusUtilNotifEnable | 1.3.6.1.4.1.9.9.217.1.9.1.8 | TruthValue | RW | |
scalar · TruthValue · read-write · current Specifies whether the generation of c6kxbarTMSwBusUtilAboveNotif and c6kxbarTMSwBusUtilBelowNotif notifications is enabled or not. When this object is 'true', the generation of cc6kxbarTMSwBusUtilAboveNotif and c6kxbarTMSwBusUtilBelowNotif notifications is enabled. When this object is 'false', the generation of cc6kxbarTMSwBusUtilAboveNotif and c6kxbarTMSwBusUtilBelowNotif notifications is disabled. | ||||
| Ncc6kxbarTrafficMonitorChObjects | 1.3.6.1.4.1.9.9.217.1.9.2 | |||
| Tcc6kxbarTMChUtilTable | 1.3.6.1.4.1.9.9.217.1.9.2.1 | NA | ||
table · not-accessible · current cc6kxbarTrafficMntrChUtilTable provides the information on the traffic utilization of each fabric channel associated with each module slot for a given traffic direction in the chassis. | ||||
| Rcc6kxbarTMChUtilEntry | 1.3.6.1.4.1.9.9.217.1.9.2.1.1 | NA | ||
row · not-accessible · current An entry in cc6kxbarTMChUtilTable. Each traffic direction for each fabric channel associated with each module slot in the chassis will have an entry in this table. | ||||
| Ccc6kxbarTMChUtilModule | 1.3.6.1.4.1.9.9.217.1.9.2.1.1.1 | ModuleSlotNumber | NA | |
column · ModuleSlotNumber · not-accessible · current Indicates the module slot number in the chassis. | ||||
| Ccc6kxbarTMChUtilChannel | 1.3.6.1.4.1.9.9.217.1.9.2.1.1.2 | FabricChannelNumber | NA | |
column · FabricChannelNumber · not-accessible · current Indicates the fabric channel number associated with the corresponding cc6kxbarTMChUtilModule. | ||||
| Ccc6kxbarTMChUtilDirection | 1.3.6.1.4.1.9.9.217.1.9.2.1.1.3 | INTEGER | NA | |
column · INTEGER · not-accessible · current Indicates the direction of traffic to be monitored.
| ||||
| Ccc6kxbarTMChUtilEnable | 1.3.6.1.4.1.9.9.217.1.9.2.1.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current Specifies whether the traffic monitor feature is enabled on a fabric channel for a given traffic direction or not. | ||||
| Ccc6kxbarTMChUtilInterval | 1.3.6.1.4.1.9.9.217.1.9.2.1.1.5 | Unsigned32 (1..4294967295) | RW | |
column · Unsigned32 (1..4294967295) · read-write · current Specifies the interval at the end of which the traffic utilization on a fabric channel for a given traffic direction is compared against its corresponding cc6kxbarTMChUtilThreshold.
| ||||
| Ccc6kxbarTMChUtilThreshold | 1.3.6.1.4.1.9.9.217.1.9.2.1.1.6 | Percent | RW | |
column · Percent · read-write · current Specifies the threshold of the traffic utilization on a fabric channel for a given traffic direction. | ||||
| Ccc6kxbarTMChUtilLogCount | 1.3.6.1.4.1.9.9.217.1.9.2.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current Indicates the number of times the following events are logged on a fabric channel for a given direction. 1. the traffic utilization on a fabric channel for a given traffic direction has risen above its corresponding configured threshold (as specified by cc6kxbarTMChUtilThreshold), or has kept staying above the configured threshold at a logging interval (as specified by cc6kxbarTMChUtilLogInterval). 2. the traffic utilization on a fabric channel for a given traffic direction has fallen below its corresponding configured threshold. | ||||
| Ccc6kxbarTMChUtilLastLogTime | 1.3.6.1.4.1.9.9.217.1.9.2.1.1.8 | DateAndTime | RO | |
column · DateAndTime · read-only · current Indicates the last logging time of the events as counted in the corresponding cc6kxbarTMChUtilLogCount on a fabric channel for a given traffic direction. This object will contain 0-1-1,00:00:00.0 when the corresponding cc6kxbarTMChUtilLogCount is zero. | ||||
| Scc6kxbarTMChUtilLogInterval | 1.3.6.1.4.1.9.9.217.1.9.2.2 | Unsigned32 (1..4294967295) | RW | |
scalar · Unsigned32 (1..4294967295) · read-write · current Specifies the logging interval if the traffic utilization for a fabric channel on a given traffic direction keeps staying above its corresponding cc6kxbarTMChUtilThreshold.
| ||||
| Scc6kxbarTMChUtilUtilization | 1.3.6.1.4.1.9.9.217.1.9.2.3 | Percent | AN | |
scalar · Percent · accessible-for-notify · current The traffic utilization on a fabric channel for a given traffic direction included in the notification currently being sent. | ||||
| Scc6kxbarTMChUtilNotifEnable | 1.3.6.1.4.1.9.9.217.1.9.2.4 | TruthValue | RW | |
scalar · TruthValue · read-write · current Specifies whether the generation of cc6kxbarTMChUtilAboveNotif and cc6kxbarTMChUtilBelowNotif notifications is enabled or not. When this object is 'true', the generation of cc6kxbarTMChUtilAboveNotif and cc6kxbarTMChUtilBelowNotif notifications is enabled. When this object is 'false', the generation of cc6kxbarTMChUtilAboveNotif and cc6kxbarTMChUtilBelowNotif notifications is disabled. | ||||
| Ncc6kxbarMIBConformance | 1.3.6.1.4.1.9.9.217.3 | |||
| Ncc6kxbarMIBCompliances | 1.3.6.1.4.1.9.9.217.3.1 | |||
| Mcc6kxbarMIBCompliance | 1.3.6.1.4.1.9.9.217.3.1.2 | deprecated | ||
compliance · deprecated The compliance statement for the CISCO-CAT6K-CROSSBAR-MIB. | ||||
| Mcc6kxbarMIBComplianceVer1 | 1.3.6.1.4.1.9.9.217.3.1.3 | deprecated | ||
compliance · deprecated The compliance statement for the CISCO-CAT6K-CROSSBAR-MIB. | ||||
| Mcc6kxbarMIBComplianceVer2 | 1.3.6.1.4.1.9.9.217.3.1.4 | deprecated | ||
compliance · deprecated The compliance statement for the CISCO-CAT6K-CROSSBAR-MIB.
| ||||
| Mcc6kxbarMIBComplianceVer3 | 1.3.6.1.4.1.9.9.217.3.1.5 | deprecated | ||
compliance · deprecated The compliance statement for the CISCO-CAT6K-CROSSBAR-MIB.
| ||||
| Mcc6kxbarMIBComplianceVer4 | 1.3.6.1.4.1.9.9.217.3.1.6 | deprecated | ||
compliance · deprecated The compliance statement for the CISCO-CAT6K-CROSSBAR-MIB.
| ||||
| Mcc6kxbarMIBComplianceVer5 | 1.3.6.1.4.1.9.9.217.3.1.7 | deprecated | ||
compliance · deprecated The compliance statement for the CISCO-CAT6K-CROSSBAR-MIB.
| ||||
| Mcc6kxbarMIBComplianceVer6 | 1.3.6.1.4.1.9.9.217.3.1.8 | deprecated | ||
compliance · deprecated The compliance statement for the CISCO-CAT6K-CROSSBAR-MIB.
| ||||
| Mcc6kxbarMIBComplianceVer7 | 1.3.6.1.4.1.9.9.217.3.1.9 | deprecated | ||
compliance · deprecated The compliance statement for the CISCO-CAT6K-CROSSBAR-MIB.
| ||||
| Mcc6kxbarMIBComplianceVer8 | 1.3.6.1.4.1.9.9.217.3.1.10 | |||
compliance · current The compliance statement for the CISCO-CAT6K-CROSSBAR-MIB.
| ||||
| Ncc6kxbarMIBGroups | 1.3.6.1.4.1.9.9.217.3.2 | |||
| Gcc6kxbarModuleStatusGroup | 1.3.6.1.4.1.9.9.217.3.2.1 | deprecated | ||
group · deprecated A collection of objects providing configuration and operation of the crossbar switching fabric module and switching capable module. cc6kxbarModuleStatusGroup object is superseded by cc6kxbarModuleStatusGroupVer1. | ||||
| Gcc6kxbarChannelStatusGroup | 1.3.6.1.4.1.9.9.217.3.2.2 | |||
group · current A collection of objects providing status and configuration of the fabric channel. | ||||
| Gcc6kxbarChannelStatisticsGroup | 1.3.6.1.4.1.9.9.217.3.2.3 | deprecated | ||
group · deprecated A collection of objects providing statistics for the fabric channel. cc6kxbarChannelStatisticsGroup object is superseded by cc6kxbarChannelStatisticsGroupVer1. | ||||
| Gcc6kxbarFallbackGroup | 1.3.6.1.4.1.9.9.217.3.2.4 | |||
group · current This object controls system fallback to bus-mode after loss of switching fabric module.
| ||||
| Gcc6kxbarBusOnlyAllowedGroup | 1.3.6.1.4.1.9.9.217.3.2.5 | |||
group · current This object determines the value of cc6kxbarModuleModeSwitchingMode of each module.
| ||||
| Gcc6kxbarModuleStatusGroupVer1 | 1.3.6.1.4.1.9.9.217.3.2.6 | |||
group · current A collection of objects providing configuration and operation of the crossbar switching fabric module and switching capable module. | ||||
| Gcc6kxbarChannelStatisticsGroupVer1 | 1.3.6.1.4.1.9.9.217.3.2.7 | |||
group · current A collection of objects providing statistics for the fabric channel. | ||||
| Gcc6kxbarLcdBannerGroup | 1.3.6.1.4.1.9.9.217.3.2.8 | |||
group · current A collection of objects providing configuration of the lcd Banner of the fabric module. | ||||
| Gcc6kxbarChannelUtilGroup | 1.3.6.1.4.1.9.9.217.3.2.9 | |||
group · current These object determines Input and Output Utilization of the fabric channel. | ||||
| Gcc6kxbarChannelSpeedGroup | 1.3.6.1.4.1.9.9.217.3.2.10 | |||
group · current A collection of objects providing the speed of the fabric channel.
| ||||
| Gcc6kxbarSwBusGroup | 1.3.6.1.4.1.9.9.217.3.2.11 | |||
group · current A collection of objects for the switching bus switching detection feature. | ||||
| Gcc6kxbarSwBusNotifGroup | 1.3.6.1.4.1.9.9.217.3.2.12 | |||
group · current A collection of notifications for the switching bus switching detection feature. | ||||
| Gcc6kxbarTruncatedOperGroup | 1.3.6.1.4.1.9.9.217.3.2.13 | |||
group · current A collection of objects providing the operational truncated mode.
| ||||
| Gcc6kxbarIntBusNotifControlGroup | 1.3.6.1.4.1.9.9.217.3.2.14 | |||
group · current A collection of objects to control the notification generation for internal bus.
| ||||
| Gcc6kxbarIntBusCRCErrNotifGroup | 1.3.6.1.4.1.9.9.217.3.2.15 | |||
group · current A collection of notifications for the internal bus CRC error. | ||||
| Gcc6kxbarIntBusCRCErrGroup | 1.3.6.1.4.1.9.9.217.3.2.16 | |||
group · current A collection of objects to indicate the internal bus CRC error information on a physical entity. | ||||
| Gcc6kxbarDcefOnlyModeAllowedGroup | 1.3.6.1.4.1.9.9.217.3.2.17 | |||
group · current A collection of objects providing the configuration and information about the dcef only mode feature.
| ||||
| Gcc6kxbarForceBusModeGroup | 1.3.6.1.4.1.9.9.217.3.2.18 | |||
group · current A collection of objects providing the configuration and information about the force bus mode feature.
| ||||
| Gcc6kxbarFlowCtrlNotifCtrlGroup | 1.3.6.1.4.1.9.9.217.3.2.19 | |||
group · current A collection of objects to control the notification generation for the system flow control feature.
| ||||
| Gcc6kxbarFlowCtrlBusThreshGroup | 1.3.6.1.4.1.9.9.217.3.2.20 | |||
group · current A collection of objects providing configuration information about the system bus flow control FIFO threshold. | ||||
| Gcc6kxbarFlowCtrlBusThrNotifGroup | 1.3.6.1.4.1.9.9.217.3.2.21 | |||
group · current A collection of notifications for the system bus flow control FIFO threshold exceeding. | ||||
| Gcc6kxbarBusOnlyModeOperGroup | 1.3.6.1.4.1.9.9.217.3.2.22 | |||
group · current A collection of objects providing the operational bus mode.
| ||||
| Gcc6kxbarSysCapPfcOperModeGroup | 1.3.6.1.4.1.9.9.217.3.2.23 | |||
group · current A collection of objects providing the system information of PFC operational mode.
| ||||
| Gcc6kxbarSysCapSwitchResGroup | 1.3.6.1.4.1.9.9.217.3.2.24 | |||
group · current A collection of objects providing the capacity information of switching resources in the system. | ||||
| Gcc6kxbarChannelUtilGroup1 | 1.3.6.1.4.1.9.9.217.3.2.25 | |||
group · current A collection of objects providing the information about peak input and output utilization of a specific fabric channel on a specific module. | ||||
| Gcc6kxbarSwBusGroup1 | 1.3.6.1.4.1.9.9.217.3.2.26 | |||
group · current A collection of objects providing the information about switching bus utilization. | ||||
| Gcc6kxbarErrorGroup | 1.3.6.1.4.1.9.9.217.3.2.27 | |||
group · current A collection of objects providing error statistics for a specific fabric channel on a specific module. | ||||
| Gcc6kxbarErrRcvryThresholdGroup | 1.3.6.1.4.1.9.9.217.3.2.28 | |||
group · current A collection of objects providing the configuration of thresholds on fabric link errors for the fabric error recovery feature. | ||||
| Gcc6kxbarErrRcvrySwitchoverGroup | 1.3.6.1.4.1.9.9.217.3.2.29 | |||
group · current A collection of objects providing the configuration of fabric switchover on excessive fabric link errors for the fabric error recovery feature. | ||||
| Gcc6kxbarErrRcvryPersLinkResGroup | 1.3.6.1.4.1.9.9.217.3.2.30 | |||
group · current A collection of objects providing the configuration of channel resync on excessive persistent fabric link errors for the fabric error recovery feature. | ||||
| Gcc6kxbarErrRcvryChResyncGroup | 1.3.6.1.4.1.9.9.217.3.2.31 | |||
group · current A collection of objects providing the configuration for channel resync threshold for the fabric error recovery feature. | ||||
| Gcc6kxbarTMSwBusUtilGroup | 1.3.6.1.4.1.9.9.217.3.2.32 | |||
group · current A collection of objects providing configuration information for traffic monitor feature on the switching bus. | ||||
| Gcc6kxbarTMSwBusUtilNotifControlGroup | 1.3.6.1.4.1.9.9.217.3.2.33 | |||
group · current A collection of objects to control the traffic monitor notification generation on the switching bus. | ||||
| Gcc6kxbarTMSwBusUtilNotifObjectGroup | 1.3.6.1.4.1.9.9.217.3.2.34 | |||
group · current A collection of objects included in the traffic monitor notifications on the switching bus. | ||||
| Gcc6kxbarTMSwBusUtilNotifGroup | 1.3.6.1.4.1.9.9.217.3.2.35 | |||
group · current A collection of traffic monitor notifications on the switching bus. | ||||
| Gcc6kxbarTMChUtilGroup | 1.3.6.1.4.1.9.9.217.3.2.36 | |||
group · current A collection of objects providing the configuration information for traffic monitor feature on fabric channels. | ||||
| Gcc6kxbarTMChUtilNotifControlGroup | 1.3.6.1.4.1.9.9.217.3.2.37 | |||
group · current A collection of objects to control the traffic monitor notification generation on fabric channels.
| ||||
| Gcc6kxbarTMChUtilNotifObjectGroup | 1.3.6.1.4.1.9.9.217.3.2.38 | |||
group · current A collection of objects included in the traffic monitor notifications on fabric channels.
| ||||
| Gcc6kxbarTMChUtilNotifGroup | 1.3.6.1.4.1.9.9.217.3.2.39 | |||
group · current A collection of traffic monitor notifications on fabric channels. | ||||
| Gcc6kxbarStatisticsLbusDropGroup | 1.3.6.1.4.1.9.9.217.3.2.40 | |||
group · current A collection of objects providing information for local bus drop packets statistics.
| ||||
Textual conventions
ChannelStatusINTEGERbufferError(5)crcError(4)heartbeatError(3)ok(1)syncError(2)timeoutError(6)unused(7)Status of the Channel.
FabricChannelNumberUnsigned32Display hint:
dFabric channel number.
ModuleSlotNumberUnsigned32Display hint:
dSlot number of the module.
Traps / Notifications
- cc6kxbarFlowCtrlBusThrExcdNotif
1.3.6.1.4.1.9.9.217.0.4 - cc6kxbarIntBusCRCErrExcdNotif
1.3.6.1.4.1.9.9.217.0.2 - cc6kxbarIntBusCRCErrRcvrdNotif
1.3.6.1.4.1.9.9.217.0.3 - cc6kxbarSwBusStatusChangeNotif
1.3.6.1.4.1.9.9.217.0.1 - cc6kxbarTMChUtilAboveNotif
1.3.6.1.4.1.9.9.217.0.7 - cc6kxbarTMChUtilBelowNotif
1.3.6.1.4.1.9.9.217.0.8 - cc6kxbarTMSwBusUtilAboveNotif
1.3.6.1.4.1.9.9.217.0.5 - cc6kxbarTMSwBusUtilBelowNotif
1.3.6.1.4.1.9.9.217.0.6
Groups and compliance
- cc6kxbarBusOnlyAllowedGroup
- cc6kxbarBusOnlyModeOperGroup
- cc6kxbarChannelSpeedGroup
- cc6kxbarChannelStatisticsGroup
- cc6kxbarChannelStatisticsGroupVer1
- cc6kxbarChannelStatusGroup
- cc6kxbarChannelUtilGroup
- cc6kxbarChannelUtilGroup1
- cc6kxbarDcefOnlyModeAllowedGroup
- cc6kxbarErrRcvryChResyncGroup
- cc6kxbarErrRcvryPersLinkResGroup
- cc6kxbarErrRcvrySwitchoverGroup
- cc6kxbarErrRcvryThresholdGroup
- cc6kxbarErrorGroup
- cc6kxbarFallbackGroup
- cc6kxbarFlowCtrlBusThrNotifGroup
- cc6kxbarFlowCtrlBusThreshGroup
- cc6kxbarFlowCtrlNotifCtrlGroup
- cc6kxbarForceBusModeGroup
- cc6kxbarIntBusCRCErrGroup
- cc6kxbarIntBusCRCErrNotifGroup
- cc6kxbarIntBusNotifControlGroup
- cc6kxbarLcdBannerGroup
- cc6kxbarMIBCompliance
- cc6kxbarMIBComplianceVer1
- cc6kxbarMIBComplianceVer2
- cc6kxbarMIBComplianceVer3
- cc6kxbarMIBComplianceVer4
- cc6kxbarMIBComplianceVer5
- cc6kxbarMIBComplianceVer6
- cc6kxbarMIBComplianceVer7
- cc6kxbarMIBComplianceVer8
- cc6kxbarModuleStatusGroup
- cc6kxbarModuleStatusGroupVer1
- cc6kxbarStatisticsLbusDropGroup
- cc6kxbarSwBusGroup
- cc6kxbarSwBusGroup1
- cc6kxbarSwBusNotifGroup
- cc6kxbarSysCapPfcOperModeGroup
- cc6kxbarSysCapSwitchResGroup
- cc6kxbarTMChUtilGroup
- cc6kxbarTMChUtilNotifControlGroup
- cc6kxbarTMChUtilNotifGroup
- cc6kxbarTMChUtilNotifObjectGroup
- cc6kxbarTMSwBusUtilGroup
- cc6kxbarTMSwBusUtilNotifControlGroup
- cc6kxbarTMSwBusUtilNotifGroup
- cc6kxbarTMSwBusUtilNotifObjectGroup
- cc6kxbarTruncatedOperGroup