CISCO-BGP4-MIB
ciscoSystemsAn extension to the IETF BGP4 MIB module defined in
RFC 1657.
Following is the terminology associated with Border
Gateway Protocol(BGP).
UPDATE message
UPDATE messages are used to transfer routing
information between BGP peers. An UPDATE message
is used to advertise a single feasible route to a
peer, or to withdraw multiple unfeasible routes
from service.
Adj-RIBs-In
The Adj-RIBs-In store routing information that has
been learned from inbound UPDATE messages. Their
contents represent routes that are available as an
input to the Decision Process.
Loc-RIB(BGP table)
The Loc-RIB contains the local routing information
that the BGP speaker has selected by applying its
local policies to the routing information contained
in its Adj-RIBs-In.
Adj-RIBs-Out
The Adj-RIBs-Out store the information that the
local BGP speaker has selected for advertisement to
its peers. The routing information stored in the
Adj-RIBs-Out will be carried in the local BGP
speaker's UPDATE messages and advertised to its
peers.
Path Attributes
A variable length sequence of path attributes is
present in every UPDATE. Each path attribute is a
triple <attribute type, attribute length,
attribute value> of variable length.
Network Layer Reachability Information(NLRI)
A variable length field present in UPDATE messages
which contains a list of Network Layer address
prefixes.
Address Family Identifier(AFI)
Primary identifier to indicate the type of the
Network Layer Reachability Information(NLRI) being
carried.
Subsequent Address Family Identifier(SAFI)
Secondary identifier to indicate the type of the
Network Layer Reachability Information(NLRI) being
carried.snmptranslate -m CISCO-BGP4-MIB -Tpsnmpwalk -v2c -c <community> -m CISCO-BGP4-MIB <host> 1.3.6.1.4.1.9.9.187Imports
| BGP4-MIB | bgpPeerEntry, bgpPeerLastError, bgpPeerRemoteAddr, bgpPeerState |
|---|---|
| CISCO-SMI | ciscoMgmt |
| INET-ADDRESS-MIB | InetAddress, InetAddressType, InetAutonomousSystemNumber, InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IciscoBgp4MIB | 1.3.6.1.4.1.9.9.187 | ||||||||||||||||||||
identity An extension to the IETF BGP4 MIB module defined in
RFC 1657.
Following is the terminology associated with Border
Gateway Protocol(BGP).
UPDATE message
UPDATE messages are used to transfer routing
information between BGP peers. An UPDATE message
is used to advertise a single feasible route to a
peer, or to withdraw multiple unfeasible routes
from service.
Adj-RIBs-In
The Adj-RIBs-In store routing information that has
been learned from inbound UPDATE messages. Their
contents represent routes that are available as an
input to the Decision Process.
Loc-RIB(BGP table)
The Loc-RIB contains the local routing information
that the BGP speaker has selected by applying its
local policies to the routing information contained
in its Adj-RIBs-In.
Adj-RIBs-Out
The Adj-RIBs-Out store the information that the
local BGP speaker has selected for advertisement to
its peers. The routing information stored in the
Adj-RIBs-Out will be carried in the local BGP
speaker's UPDATE messages and advertised to its
peers.
Path Attributes
A variable length sequence of path attributes is
present in every UPDATE. Each path attribute is a
triple <attribute type, attribute length,
attribute value> of variable length.
Network Layer Reachability Information(NLRI)
A variable length field present in UPDATE messages
which contains a list of Network Layer address
prefixes.
Address Family Identifier(AFI)
Primary identifier to indicate the type of the
Network Layer Reachability Information(NLRI) being
carried.
Subsequent Address Family Identifier(SAFI)
Secondary identifier to indicate the type of the
Network Layer Reachability Information(NLRI) being
carried. | |||||||||||||||||||||
| NciscoBgp4NotifyPrefix | 1.3.6.1.4.1.9.9.187.0 | ||||||||||||||||||||
| !cbgpFsmStateChange | 1.3.6.1.4.1.9.9.187.0.1 | ||||||||||||||||||||
notification · current The BGP cbgpFsmStateChange notification is generated for every BGP FSM state change. The bgpPeerRemoteAddr value is attached to the notification object ID. | |||||||||||||||||||||
| !cbgpBackwardTransition | 1.3.6.1.4.1.9.9.187.0.2 | ||||||||||||||||||||
notification · current The cbgpBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state. The bgpPeerRemoteAddr value is attached to the notification object ID. | |||||||||||||||||||||
| !cbgpPrefixThresholdExceeded | 1.3.6.1.4.1.9.9.187.0.3 | ||||||||||||||||||||
notification · current The cbgpPrefixThresholdExceeded notification is generated when prefix count exceeds the configured warning threshold on a session for an address family. The bgpPeerRemoteAddr, cbgpPeerAddrFamilyAfi and cbgpPeerAddrFamilySafi values are attached to the notification object ID. | |||||||||||||||||||||
| !cbgpPrefixThresholdClear | 1.3.6.1.4.1.9.9.187.0.4 | ||||||||||||||||||||
notification · current The cbgpPrefixThresholdClear notification is generated when prefix count drops below the configured clear threshold on a session for an address family once cbgpPrefixThresholdExceeded is generated. This won't be generated if the peer session goes down after the generation of cbgpPrefixThresholdExceeded. The bgpPeerRemoteAddr, cbgpPeerAddrFamilyAfi and cbgpPeerAddrFamilySafi values are attached to the notification object ID. | |||||||||||||||||||||
| !cbgpPeer2EstablishedNotification | 1.3.6.1.4.1.9.9.187.0.5 | ||||||||||||||||||||
notification · current The cbgpPeer2EstablishedNotification notification is generated when the BGP FSM enters the established state.
| |||||||||||||||||||||
| !cbgpPeer2BackwardTransNotification | 1.3.6.1.4.1.9.9.187.0.6 | ||||||||||||||||||||
notification · current The cbgpPeer2BackwardTransNotification notification is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.
| |||||||||||||||||||||
| !cbgpPeer2FsmStateChange | 1.3.6.1.4.1.9.9.187.0.7 | ||||||||||||||||||||
notification · current The cbgpPeer2FsmStateChange notification is generated for every BGP FSM state change. | |||||||||||||||||||||
| !cbgpPeer2BackwardTransition | 1.3.6.1.4.1.9.9.187.0.8 | ||||||||||||||||||||
notification · current The cbgpPeer2BackwardTransition notification is generated when the BGP FSM moves from a higher numbered state to a lower numbered state. | |||||||||||||||||||||
| !cbgpPeer2PrefixThresholdExceeded | 1.3.6.1.4.1.9.9.187.0.9 | ||||||||||||||||||||
notification · current The cbgpPeer2PrefixThresholdExceeded notification is generated when prefix count exceeds the configured warning threshold on a session for an address family. | |||||||||||||||||||||
| !cbgpPeer2PrefixThresholdClear | 1.3.6.1.4.1.9.9.187.0.10 | ||||||||||||||||||||
notification · current The cbgpPeer2PrefixThresholdClear notification is generated when prefix count drops below the configured clear threshold on a session for an address family once cbgpPeer2PrefixThresholdExceeded is generated. This will not be generated if the peer session goes down after the generation of cbgpPrefixThresholdExceeded. | |||||||||||||||||||||
| NciscoBgp4MIBObjects | 1.3.6.1.4.1.9.9.187.1 | ||||||||||||||||||||
| NcbgpRoute | 1.3.6.1.4.1.9.9.187.1.1 | ||||||||||||||||||||
| TcbgpRouteTable | 1.3.6.1.4.1.9.9.187.1.1.1 | NA | |||||||||||||||||||
table · not-accessible · current This table contains information about routes to destination networks from all BGP4 peers. Since BGP4 can carry routes for multiple Network Layer protocols, this table has the Address Family Identifier(AFI) of the Network Layer protocol as the first index. Further for a given AFI, routes carried by BGP4 are distinguished based on Subsequent Address Family Identifiers(SAFI). Hence that is used as the second index. Conceptually there is a separate Loc-RIB maintained by the BGP speaker for each combination of AFI and SAFI supported by it. | |||||||||||||||||||||
| RcbgpRouteEntry | 1.3.6.1.4.1.9.9.187.1.1.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Information about a path to a network received from a peer. | |||||||||||||||||||||
| CcbgpRouteAfi | 1.3.6.1.4.1.9.9.187.1.1.1.1.1 | InetAddressType | NA | ||||||||||||||||||
column · InetAddressType · not-accessible · current Represents Address Family Identifier(AFI) of the Network Layer protocol associated with the route. An implementation is only required to support IPv4 unicast and VPNv4 (Value - 1) address families. | |||||||||||||||||||||
| CcbgpRouteSafi | 1.3.6.1.4.1.9.9.187.1.1.1.1.2 | CbgpSafi | NA | ||||||||||||||||||
column · CbgpSafi · not-accessible · current Represents Subsequent Address Family Identifier(SAFI) of the route. It gives additional information about the type of the route. An implementation is only required to support IPv4 unicast(Value - 1) and VPNv4( Value - 128) address families. | |||||||||||||||||||||
| CcbgpRoutePeerType | 1.3.6.1.4.1.9.9.187.1.1.1.1.3 | InetAddressType | NA | ||||||||||||||||||
column · InetAddressType · not-accessible · current Represents the type of Network Layer address stored in cbgpRoutePeer. An implementation is only required to support IPv4 address type(Value - 1). | |||||||||||||||||||||
| CcbgpRoutePeer | 1.3.6.1.4.1.9.9.187.1.1.1.1.4 | InetAddress | NA | ||||||||||||||||||
column · InetAddress · not-accessible · current The Network Layer address of the peer where the route information was learned. An implementation is only required to support an IPv4 peer. | |||||||||||||||||||||
| CcbgpRouteAddrPrefix | 1.3.6.1.4.1.9.9.187.1.1.1.1.5 | CbgpNetworkAddress | NA | ||||||||||||||||||
column · CbgpNetworkAddress · not-accessible · current A Network Address prefix in the Network Layer Reachability Information field of BGP UPDATE message. This object is a Network Address containing the prefix with length specified by cbgpRouteAddrPrefixLen. Any bits beyond the length specified by cbgpRouteAddrPrefixLen are zeroed. | |||||||||||||||||||||
| CcbgpRouteAddrPrefixLen | 1.3.6.1.4.1.9.9.187.1.1.1.1.6 | Unsigned32 (0..2040) | NA | ||||||||||||||||||
column · Unsigned32 (0..2040) · not-accessible · current Length in bits of the Network Address prefix in the Network Layer Reachability Information field. | |||||||||||||||||||||
| CcbgpRouteOrigin | 1.3.6.1.4.1.9.9.187.1.1.1.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The ultimate origin of the route information.
| |||||||||||||||||||||
| CcbgpRouteASPathSegment | 1.3.6.1.4.1.9.9.187.1.1.1.1.8 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current The sequence of AS path segments. Each AS
path segment is represented by a triple
<type, length, value>.
The type is a 1-octet field which has two
possible values:
1 AS_SET: unordered set of ASs a route in the
UPDATE message has traversed
2 AS_SEQUENCE: ordered set of ASs a route in the
UPDATE message has traversed.
The length is a 1-octet field containing the
number of ASs in the value field.
The value field contains one or more AS
numbers, each AS is represented in the octet
string as a pair of octets according to the
following algorithm:
first-byte-of-pair = ASNumber / 256;
second-byte-of-pair = ASNumber & 255; | |||||||||||||||||||||
| CcbgpRouteNextHop | 1.3.6.1.4.1.9.9.187.1.1.1.1.9 | CbgpNetworkAddress | RO | ||||||||||||||||||
column · CbgpNetworkAddress · read-only · current The Network Layer address of the border router that should be used for the destination network. | |||||||||||||||||||||
| CcbgpRouteMedPresent | 1.3.6.1.4.1.9.9.187.1.1.1.1.10 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates the presence/absence of MULTI_EXIT_DISC attribute for the route. | |||||||||||||||||||||
| CcbgpRouteMultiExitDisc | 1.3.6.1.4.1.9.9.187.1.1.1.1.11 | Unsigned32 (0..4294967295) | RO | ||||||||||||||||||
column · Unsigned32 (0..4294967295) · read-only · current This metric is used to discriminate between multiple exit points to an adjacent autonomous system. The value of this object is irrelevant if the value of of cbgpRouteMedPresent is false(2). | |||||||||||||||||||||
| CcbgpRouteLocalPrefPresent | 1.3.6.1.4.1.9.9.187.1.1.1.1.12 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates the presence/absence of LOCAL_PREF attribute for the route. | |||||||||||||||||||||
| CcbgpRouteLocalPref | 1.3.6.1.4.1.9.9.187.1.1.1.1.13 | Unsigned32 (0..4294967295) | RO | ||||||||||||||||||
column · Unsigned32 (0..4294967295) · read-only · current The degree of preference calculated by the local BGP4 speaker for the route. The value of this object is irrelevant if the value of cbgpRouteLocalPrefPresent is false(2). | |||||||||||||||||||||
| CcbgpRouteAtomicAggregate | 1.3.6.1.4.1.9.9.187.1.1.1.1.14 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Whether or not the local system has selected a less specific route without selecting a more specific route.
| |||||||||||||||||||||
| CcbgpRouteAggregatorAS | 1.3.6.1.4.1.9.9.187.1.1.1.1.15 | Unsigned32 (0..65535) | RO | ||||||||||||||||||
column · Unsigned32 (0..65535) · read-only · current The AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. | |||||||||||||||||||||
| CcbgpRouteAggregatorAddrType | 1.3.6.1.4.1.9.9.187.1.1.1.1.16 | InetAddressType | RO | ||||||||||||||||||
column · InetAddressType · read-only · current Represents the type of Network Layer address stored in cbgpRouteAggregatorAddr. | |||||||||||||||||||||
| CcbgpRouteAggregatorAddr | 1.3.6.1.4.1.9.9.187.1.1.1.1.17 | InetAddress | RO | ||||||||||||||||||
column · InetAddress · read-only · current The Network Layer address of the last BGP4 speaker that performed route aggregation. A value of all zeros indicates the absence of this attribute. | |||||||||||||||||||||
| CcbgpRouteBest | 1.3.6.1.4.1.9.9.187.1.1.1.1.18 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current An indication of whether or not this route was chosen as the best BGP4 route. | |||||||||||||||||||||
| CcbgpRouteUnknownAttr | 1.3.6.1.4.1.9.9.187.1.1.1.1.19 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current One or more path attributes not understood by this BGP4 speaker. Size zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, if any, are not recorded by this object. Each path attribute is a triple <attribute type, attribute length, attribute value> of variable length. Attribute Type is a two-octet field that consists of the Attribute Flags octet followed by the Attribute Type Code octet. If the Extended Length bit of the Attribute Flags octet is set to 0, the third octet of the Path Attribute contains the length of the attribute data in octets. If the Extended Length bit of the Attribute Flags octet is set to 1, then the third and the fourth octets of the path attribute contain the length of the attribute data in octets. The remaining octets of the Path Attribute represent the attribute value and are interpreted according to the Attribute Flags and the Attribute Type Code. | |||||||||||||||||||||
| NcbgpPeer | 1.3.6.1.4.1.9.9.187.1.2 | ||||||||||||||||||||
| TcbgpPeerTable | 1.3.6.1.4.1.9.9.187.1.2.1 | NA | |||||||||||||||||||
table · not-accessible · current BGP peer table. This table contains, one entry per BGP peer, information about the connections with BGP peers. | |||||||||||||||||||||
| RcbgpPeerEntry | 1.3.6.1.4.1.9.9.187.1.2.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry containing information about the connection with a BGP peer.
| |||||||||||||||||||||
| CcbgpPeerPrefixAccepted | 1.3.6.1.4.1.9.9.187.1.2.1.1.1 | Counter32 | RO | deprecated | |||||||||||||||||
column · Counter32 · read-only · deprecated Number of Route prefixes received on this connnection, which are accepted after applying filters. Possible filters are route maps, prefix lists, distributed lists, etc. | |||||||||||||||||||||
| CcbgpPeerPrefixDenied | 1.3.6.1.4.1.9.9.187.1.2.1.1.2 | Counter32 | RO | deprecated | |||||||||||||||||
column · Counter32 · read-only · deprecated Counter which gets incremented when a route prefix received on this connection is denied or when a route prefix is denied during soft reset of this connection if 'soft-reconfiguration' is on . This object is initialized to zero when the peer is configured or the router is rebooted | |||||||||||||||||||||
| CcbgpPeerPrefixLimit | 1.3.6.1.4.1.9.9.187.1.2.1.1.3 | Unsigned32 (1..4294967295) | RW | deprecated | |||||||||||||||||
column · Unsigned32 (1..4294967295) · read-write · deprecated Max number of route prefixes accepted on this connection | |||||||||||||||||||||
| CcbgpPeerPrefixAdvertised | 1.3.6.1.4.1.9.9.187.1.2.1.1.4 | Counter32 | RO | deprecated | |||||||||||||||||
column · Counter32 · read-only · deprecated Counter which gets incremented when a route prefix is advertised on this connection. This object is initialized to zero when the peer is configured or the router is rebooted | |||||||||||||||||||||
| CcbgpPeerPrefixSuppressed | 1.3.6.1.4.1.9.9.187.1.2.1.1.5 | Counter32 | RO | deprecated | |||||||||||||||||
column · Counter32 · read-only · deprecated Counter which gets incremented when a route prefix is suppressed from being sent on this connection. This object is initialized to zero when the peer is configured or the router is rebooted | |||||||||||||||||||||
| CcbgpPeerPrefixWithdrawn | 1.3.6.1.4.1.9.9.187.1.2.1.1.6 | Counter32 | RO | deprecated | |||||||||||||||||
column · Counter32 · read-only · deprecated Counter which gets incremented when a route prefix is withdrawn on this connection. This object is initialized to zero when the peer is configured or the router is rebooted | |||||||||||||||||||||
| CcbgpPeerLastErrorTxt | 1.3.6.1.4.1.9.9.187.1.2.1.1.7 | SnmpAdminString | RO | ||||||||||||||||||
column · SnmpAdminString · read-only · current Implementation specific error description for bgpPeerLastErrorReceived. | |||||||||||||||||||||
| CcbgpPeerPrevState | 1.3.6.1.4.1.9.9.187.1.2.1.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The BGP peer connection previous state.
| |||||||||||||||||||||
| TcbgpPeerCapsTable | 1.3.6.1.4.1.9.9.187.1.2.2 | NA | |||||||||||||||||||
table · not-accessible · current This table contains the capabilities that are supported by a peer. Capabilities of a peer are received during BGP connection establishment. Values corresponding to each received capability are stored in this table. When a new capability is received, this table is updated with a new entry. When an existing capability is not received during the latest connection establishment, the corresponding entry is deleted from the table. | |||||||||||||||||||||
| RcbgpPeerCapsEntry | 1.3.6.1.4.1.9.9.187.1.2.2.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry represents a capability received from a peer with a particular code and an index. When a capability is received multiple times with different values during a BGP connection establishment, corresponding entries are differentiated with indices. | |||||||||||||||||||||
| CcbgpPeerCapCode | 1.3.6.1.4.1.9.9.187.1.2.2.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current The BGP Capability Advertisement Capability Code.
| |||||||||||||||||||||
| CcbgpPeerCapIndex | 1.3.6.1.4.1.9.9.187.1.2.2.1.2 | Unsigned32 (1..128) | NA | ||||||||||||||||||
column · Unsigned32 (1..128) · not-accessible · current Multiple instances of a given capability may be sent by a BGP speaker. This variable is used to index them. | |||||||||||||||||||||
| CcbgpPeerCapValue | 1.3.6.1.4.1.9.9.187.1.2.2.1.3 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current The value of the announced capability. This
MIB object value is organized as given below,
Capability : Route Refresh Capability
Null string
Capability : Multiprotocol Extensions
+----------------------------------+
| AFI(16 bits) |
+----------------------------------+
| SAFI (8 bits) |
+----------------------------------+
Capability : Graceful Restart
+----------------------------------+
| Restart Flags (4 bits) |
+----------------------------------+
| Restart Time in seconds (12 bits)|
+----------------------------------+
| AFI(16 bits) |
+----------------------------------+
| SAFI (8 bits) |
+----------------------------------+
| Flags for Address Family (8 bits)|
+----------------------------------+
| ... |
+----------------------------------+
| AFI(16 bits) |
+----------------------------------+
| SAFI (8 bits) |
+----------------------------------+
| Flags for Address Family (8 bits)|
+----------------------------------+ | |||||||||||||||||||||
| TcbgpPeerAddrFamilyTable | 1.3.6.1.4.1.9.9.187.1.2.3 | NA | |||||||||||||||||||
table · not-accessible · current This table contains information related to address families supported by a peer. Supported address families of a peer are known during BGP connection establishment. When a new supported address family is known, this table is updated with a new entry. When an address family is not supported any more, corresponding entry is deleted from the table. | |||||||||||||||||||||
| RcbgpPeerAddrFamilyEntry | 1.3.6.1.4.1.9.9.187.1.2.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry is identified by an AFI/SAFI pair and peer address. It contains names associated with an address family. | |||||||||||||||||||||
| CcbgpPeerAddrFamilyAfi | 1.3.6.1.4.1.9.9.187.1.2.3.1.1 | InetAddressType | NA | ||||||||||||||||||
column · InetAddressType · not-accessible · current The AFI index of the entry. An implementation is only required to support IPv4 unicast and VPNv4 (Value - 1) address families. | |||||||||||||||||||||
| CcbgpPeerAddrFamilySafi | 1.3.6.1.4.1.9.9.187.1.2.3.1.2 | CbgpSafi | NA | ||||||||||||||||||
column · CbgpSafi · not-accessible · current The SAFI index of the entry. An implementation is only required to support IPv4 unicast(Value - 1) and VPNv4( Value - 128) address families. | |||||||||||||||||||||
| CcbgpPeerAddrFamilyName | 1.3.6.1.4.1.9.9.187.1.2.3.1.3 | SnmpAdminString | RO | IPv4 Unicast | |||||||||||||||||
| TcbgpPeerAddrFamilyPrefixTable | 1.3.6.1.4.1.9.9.187.1.2.4 | NA | |||||||||||||||||||
table · not-accessible · current This table contains prefix related information related to address families supported by a peer. Supported address families of a peer are known during BGP connection establishment. When a new supported address family is known, this table is updated with a new entry. When an address family is not supported any more, corresponding entry is deleted from the table. | |||||||||||||||||||||
| RcbgpPeerAddrFamilyPrefixEntry | 1.3.6.1.4.1.9.9.187.1.2.4.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry is identified by an AFI/SAFI pair and peer address. It contains information associated with route prefixes belonging to an address family. | |||||||||||||||||||||
| CcbgpPeerAcceptedPrefixes | 1.3.6.1.4.1.9.9.187.1.2.4.1.1 | Counter32 | RO | 15 | |||||||||||||||||
column · Counter32 · read-only · current Number of accepted route prefixes on this connection, which belong to an address family. | |||||||||||||||||||||
| CcbgpPeerDeniedPrefixes | 1.3.6.1.4.1.9.9.187.1.2.4.1.2 | Gauge32 | RO | 0 | |||||||||||||||||
column · Gauge32 · read-only · current This counter is incremented when a route prefix, which belongs to an address family, received on this connection is denied. It is initialized to zero when the connection is undergone a hard reset. | |||||||||||||||||||||
| CcbgpPeerPrefixAdminLimit | 1.3.6.1.4.1.9.9.187.1.2.4.1.3 | Unsigned32 (1..4294967295) | RW | 1048576 | |||||||||||||||||
| CcbgpPeerPrefixThreshold | 1.3.6.1.4.1.9.9.187.1.2.4.1.4 | Unsigned32 (1..100) | RW | 75 | |||||||||||||||||
column · Unsigned32 (1..100) · read-write · current Prefix threshold value (%) for an address family on this connection at which warning message stating the prefix count is crossed the threshold or corresponding SNMP notification is generated. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcbgpPeerPrefixClearThreshold | 1.3.6.1.4.1.9.9.187.1.2.4.1.5 | Unsigned32 (1..100) | RO | 75 | |||||||||||||||||
column · Unsigned32 (1..100) · read-only · current Prefix threshold value (%) for an address family on this connection at which SNMP clear notification is generated if prefix threshold notification is already generated. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcbgpPeerAdvertisedPrefixes | 1.3.6.1.4.1.9.9.187.1.2.4.1.6 | Gauge32 | RO | 6 | |||||||||||||||||
column · Gauge32 · read-only · current This counter is incremented when a route prefix, which belongs to an address family is advertised on this connection. It is initialized to zero when the connection is undergone a hard reset. | |||||||||||||||||||||
| CcbgpPeerSuppressedPrefixes | 1.3.6.1.4.1.9.9.187.1.2.4.1.7 | Gauge32 | RO | 0 | |||||||||||||||||
column · Gauge32 · read-only · current This counter is incremented when a route prefix, which belongs to an address family is suppressed from being sent on this connection. It is initialized to zero when the connection is undergone a hard reset. | |||||||||||||||||||||
| CcbgpPeerWithdrawnPrefixes | 1.3.6.1.4.1.9.9.187.1.2.4.1.8 | Gauge32 | RO | 0 | |||||||||||||||||
column · Gauge32 · read-only · current This counter is incremented when a route prefix, which belongs to an address family, is withdrawn on this connection. It is initialized to zero when the connection is undergone a hard reset. | |||||||||||||||||||||
| TcbgpPeer2Table | 1.3.6.1.4.1.9.9.187.1.2.5 | NA | |||||||||||||||||||
table · not-accessible · current BGP peer table. This table contains, one entry per BGP peer, information about the connections with BGP peers. | |||||||||||||||||||||
| RcbgpPeer2Entry | 1.3.6.1.4.1.9.9.187.1.2.5.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry containing information about the connection with a BGP peer. | |||||||||||||||||||||
| CcbgpPeer2Type | 1.3.6.1.4.1.9.9.187.1.2.5.1.1 | InetAddressType | NA | ||||||||||||||||||
column · InetAddressType · not-accessible · current Represents the type of Peer address stored in cbgpPeer2Entry. | |||||||||||||||||||||
| CcbgpPeer2RemoteAddr | 1.3.6.1.4.1.9.9.187.1.2.5.1.2 | InetAddress | NA | ||||||||||||||||||
column · InetAddress · not-accessible · current The remote IP address of this entry's BGP peer. | |||||||||||||||||||||
| CcbgpPeer2State | 1.3.6.1.4.1.9.9.187.1.2.5.1.3 | INTEGER | RO | established(6) | |||||||||||||||||
column · INTEGER · read-only · current The BGP peer connection state.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcbgpPeer2AdminStatus | 1.3.6.1.4.1.9.9.187.1.2.5.1.4 | INTEGER | RW | start(2) | |||||||||||||||||
column · INTEGER · read-write · current The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Manual Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Manual Stop Event to be generated. This parameter can be used to restart BGP peer connections. Care should be used in providing write access to this object without adequate authentication.
| |||||||||||||||||||||
| CcbgpPeer2NegotiatedVersion | 1.3.6.1.4.1.9.9.187.1.2.5.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The negotiated version of BGP running between the two peers. This entry MUST be zero (0) unless the cbgpPeer2State is in the openconfirm or the established state. Note that legal values for this object are between 0 and 255. | |||||||||||||||||||||
| CcbgpPeer2LocalAddr | 1.3.6.1.4.1.9.9.187.1.2.5.1.6 | InetAddress | RO | 0a:2c:20:0e | |||||||||||||||||
column · InetAddress · read-only · current The local IP address of this entry's BGP connection. | |||||||||||||||||||||
| CcbgpPeer2LocalPort | 1.3.6.1.4.1.9.9.187.1.2.5.1.7 | InetPortNumber | RO | ||||||||||||||||||
column · InetPortNumber · read-only · current The local port for the TCP connection between the BGP peers. | |||||||||||||||||||||
| CcbgpPeer2LocalAs | 1.3.6.1.4.1.9.9.187.1.2.5.1.8 | InetAutonomousSystemNumber | RO | ||||||||||||||||||
column · InetAutonomousSystemNumber · read-only · current The local AS number for this session. | |||||||||||||||||||||
| CcbgpPeer2LocalIdentifier | 1.3.6.1.4.1.9.9.187.1.2.5.1.9 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current The BGP Identifier of this entry's BGP peer. | |||||||||||||||||||||
| CcbgpPeer2RemotePort | 1.3.6.1.4.1.9.9.187.1.2.5.1.10 | InetPortNumber | RO | ||||||||||||||||||
column · InetPortNumber · read-only · current The remote port for the TCP connection between the BGP peers. Note that the objects cbgpPeer2LocalAddr, cbgpPeer2LocalPort, cbgpPeer2RemoteAddr, and cbgpPeer2RemotePort provide the appropriate reference to the standard MIB TCP connection table. | |||||||||||||||||||||
| CcbgpPeer2RemoteAs | 1.3.6.1.4.1.9.9.187.1.2.5.1.11 | InetAutonomousSystemNumber | RO | 65083 | |||||||||||||||||
| CcbgpPeer2RemoteIdentifier | 1.3.6.1.4.1.9.9.187.1.2.5.1.12 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current The BGP Identifier of this entry's BGP peer. This entry MUST be 0.0.0.0 unless the cbgpPeer2State is in the openconfirm or the established state. | |||||||||||||||||||||
| CcbgpPeer2InUpdates | 1.3.6.1.4.1.9.9.187.1.2.5.1.13 | Counter32 | RO | 1 | |||||||||||||||||
| CcbgpPeer2OutUpdates | 1.3.6.1.4.1.9.9.187.1.2.5.1.14 | Counter32 | RO | 4 | |||||||||||||||||
column · Counter32 · read-only · current The number of BGP UPDATE messages transmitted on this connection. | |||||||||||||||||||||
| CcbgpPeer2InTotalMessages | 1.3.6.1.4.1.9.9.187.1.2.5.1.15 | Counter32 | RO | 302 | |||||||||||||||||
| CcbgpPeer2OutTotalMessages | 1.3.6.1.4.1.9.9.187.1.2.5.1.16 | Counter32 | RO | 316 | |||||||||||||||||
column · Counter32 · read-only · current The total number of messages transmitted to the remote peer on this connection. | |||||||||||||||||||||
| CcbgpPeer2LastError | 1.3.6.1.4.1.9.9.187.1.2.5.1.17 | OCTET STRING (SIZE (2)) | RO | 06:02 | |||||||||||||||||
column · OCTET STRING (SIZE (2)) · read-only · current The last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcbgpPeer2FsmEstablishedTransitions | 1.3.6.1.4.1.9.9.187.1.2.5.1.18 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The total number of times the BGP FSM transitioned into the established state for this peer. | |||||||||||||||||||||
| CcbgpPeer2FsmEstablishedTime | 1.3.6.1.4.1.9.9.187.1.2.5.1.19 | Gauge32 | RO | 8497 | |||||||||||||||||
column · Gauge32 · read-only · current This timer indicates how long (in seconds) this peer has been in the established state or how long since this peer was last in the established state. It is set to zero when a new peer is configured or when the router is booted.
| |||||||||||||||||||||
| CcbgpPeer2ConnectRetryInterval | 1.3.6.1.4.1.9.9.187.1.2.5.1.20 | Integer32 (1..65535) | RW | ||||||||||||||||||
column · Integer32 (1..65535) · read-write · current Time interval (in seconds) for the ConnectRetry timer. The suggested value for this timer is 120 seconds.
| |||||||||||||||||||||
| CcbgpPeer2HoldTime | 1.3.6.1.4.1.9.9.187.1.2.5.1.21 | Integer32 (0 | 3..65535) | RO | ||||||||||||||||||
column · Integer32 (0 | 3..65535) · read-only · current Time interval (in seconds) for the Hold Timer established with the peer. The value of this object is calculated by this BGP speaker, using the smaller of the values in cbgpPeer2HoldTimeConfigured and the Hold Time received in the OPEN message. This value must be at least three seconds if it is not zero (0). If the Hold Timer has not been established with the peer this object MUST have a value of zero (0). If the cbgpPeer2HoldTimeConfigured object has a value of (0), then this object MUST have a value of (0).
| |||||||||||||||||||||
| CcbgpPeer2KeepAlive | 1.3.6.1.4.1.9.9.187.1.2.5.1.22 | Integer32 (0 | 1..21845) | RO | ||||||||||||||||||
column · Integer32 (0 | 1..21845) · read-only · current Time interval (in seconds) for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with cbgpPeer2HoldTime, it has the same proportion that cbgpPeer2KeepAliveConfigured has, compared with cbgpPeer2HoldTimeConfigured. If the KeepAlive timer has not been established with the peer, this object MUST have a value of zero (0). If the of cbgpPeer2KeepAliveConfigured object has a value of (0), then this object MUST have a value of (0).
| |||||||||||||||||||||
| CcbgpPeer2HoldTimeConfigured | 1.3.6.1.4.1.9.9.187.1.2.5.1.23 | Integer32 (0 | 3..65535) | RW | ||||||||||||||||||
column · Integer32 (0 | 3..65535) · read-write · current Time interval (in seconds) for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (cbgpPeer2HoldTime) with the peer. This value must not be less than three seconds if it is not zero (0). If it is zero (0), the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds.
| |||||||||||||||||||||
| CcbgpPeer2KeepAliveConfigured | 1.3.6.1.4.1.9.9.187.1.2.5.1.24 | Integer32 (0 | 1..21845) | RW | ||||||||||||||||||
column · Integer32 (0 | 1..21845) · read-write · current Time interval (in seconds) for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages' frequency relative to the value specified in cbgpPeer2HoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by cbgpPeer2KeepAlive. A reasonable maximum value for this timer would be one third of that of cbgpPeer2HoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.
| |||||||||||||||||||||
| CcbgpPeer2MinASOriginationInterval | 1.3.6.1.4.1.9.9.187.1.2.5.1.25 | Integer32 (1..65535) | RW | ||||||||||||||||||
column · Integer32 (1..65535) · read-write · current Time interval (in seconds) for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds.
| |||||||||||||||||||||
| CcbgpPeer2MinRouteAdvertisementInterval | 1.3.6.1.4.1.9.9.187.1.2.5.1.26 | Integer32 (1..65535) | RW | ||||||||||||||||||
column · Integer32 (1..65535) · read-write · current Time interval (in seconds) for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds for EBGP connections and 5 seconds for IBGP connections.
| |||||||||||||||||||||
| CcbgpPeer2InUpdateElapsedTime | 1.3.6.1.4.1.9.9.187.1.2.5.1.27 | Gauge32 | RO | 8491 | |||||||||||||||||
column · Gauge32 · read-only · current Elapsed time (in seconds) since the last BGP UPDATE message was received from the peer. Each time cbgpPeer2InUpdates is incremented, the value of this object is set to zero (0).
| |||||||||||||||||||||
| CcbgpPeer2LastErrorTxt | 1.3.6.1.4.1.9.9.187.1.2.5.1.28 | SnmpAdminString | RO | administrative shutdown | |||||||||||||||||
column · SnmpAdminString · read-only · current Implementation specific error description for bgpPeerLastErrorReceived. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcbgpPeer2PrevState | 1.3.6.1.4.1.9.9.187.1.2.5.1.29 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The BGP peer connection previous state.
| |||||||||||||||||||||
| TcbgpPeer2CapsTable | 1.3.6.1.4.1.9.9.187.1.2.6 | NA | |||||||||||||||||||
table · not-accessible · current This table contains the capabilities that are supported by a peer. Capabilities of a peer are received during BGP connection establishment. Values corresponding to each received capability are stored in this table. When a new capability is received, this table is updated with a new entry. When an existing capability is not received during the latest connection establishment, the corresponding entry is deleted from the table. | |||||||||||||||||||||
| RcbgpPeer2CapsEntry | 1.3.6.1.4.1.9.9.187.1.2.6.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry represents a capability received from a peer with a particular code and an index. When a capability is received multiple times with different values during a BGP connection establishment, corresponding entries are differentiated with indices. | |||||||||||||||||||||
| CcbgpPeer2CapCode | 1.3.6.1.4.1.9.9.187.1.2.6.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current The BGP Capability Advertisement Capability Code.
| |||||||||||||||||||||
| CcbgpPeer2CapIndex | 1.3.6.1.4.1.9.9.187.1.2.6.1.2 | Unsigned32 (1..128) | NA | ||||||||||||||||||
column · Unsigned32 (1..128) · not-accessible · current Multiple instances of a given capability may be sent by a BGP speaker. This variable is used to index them. | |||||||||||||||||||||
| CcbgpPeer2CapValue | 1.3.6.1.4.1.9.9.187.1.2.6.1.3 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current The value of the announced capability. This
MIB object value is organized as given below,
Capability : Route Refresh Capability
4-Byte AS Capability
Null string
Capability : Multiprotocol Extensions
+----------------------------------+
| AFI(16 bits) |
+----------------------------------+
| SAFI (8 bits) |
+----------------------------------+
Capability : Graceful Restart
+----------------------------------+
| Restart Flags (4 bits) |
+----------------------------------+
| Restart Time in seconds (12 bits)|
+----------------------------------+
| AFI(16 bits) |
+----------------------------------+
| SAFI (8 bits) |
+----------------------------------+
| Flags for Address Family (8 bits)|
+----------------------------------+
| ... |
+----------------------------------+
| AFI(16 bits) |
+----------------------------------+
| SAFI (8 bits) |
+----------------------------------+
| Flags for Address Family (8 bits)|
+----------------------------------+
Capability : Additional Paths
+----------------------------------+
| AFI(16 bits) |
+----------------------------------+
| SAFI (8 bits) |
+----------------------------------+
| Send/Receive (8 bits) |
+----------------------------------+ | |||||||||||||||||||||
| TcbgpPeer2AddrFamilyTable | 1.3.6.1.4.1.9.9.187.1.2.7 | NA | |||||||||||||||||||
table · not-accessible · current This table contains information related to address families supported by a peer. Supported address families of a peer are known during BGP connection establishment. When a new supported address family is known, this table is updated with a new entry. When an address family is not supported any more, corresponding entry is deleted from the table. | |||||||||||||||||||||
| RcbgpPeer2AddrFamilyEntry | 1.3.6.1.4.1.9.9.187.1.2.7.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry is identified by an AFI/SAFI pair and peer address. It contains names associated with an address family. | |||||||||||||||||||||
| CcbgpPeer2AddrFamilyAfi | 1.3.6.1.4.1.9.9.187.1.2.7.1.1 | InetAddressType | NA | ||||||||||||||||||
column · InetAddressType · not-accessible · current The AFI index of the entry. An implementation is only required to support IPv4 unicast and VPNv4 (Value - 1) address families. | |||||||||||||||||||||
| CcbgpPeer2AddrFamilySafi | 1.3.6.1.4.1.9.9.187.1.2.7.1.2 | CbgpSafi | NA | ||||||||||||||||||
column · CbgpSafi · not-accessible · current The SAFI index of the entry. An implementation is only required to support IPv4 unicast(Value - 1) and VPNv4( Value - 128) address families. | |||||||||||||||||||||
| CcbgpPeer2AddrFamilyName | 1.3.6.1.4.1.9.9.187.1.2.7.1.3 | SnmpAdminString | RO | VPNv4 Unicast | |||||||||||||||||
column · SnmpAdminString · read-only · current Implementation specific Address Family name. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TcbgpPeer2AddrFamilyPrefixTable | 1.3.6.1.4.1.9.9.187.1.2.8 | NA | |||||||||||||||||||
table · not-accessible · current This table contains prefix related information related to address families supported by a peer. Supported address families of a peer are known during BGP connection establishment. When a new supported address family is known, this table is updated with a new entry. When an address family is not supported any more, corresponding entry is deleted from the table. | |||||||||||||||||||||
| RcbgpPeer2AddrFamilyPrefixEntry | 1.3.6.1.4.1.9.9.187.1.2.8.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry is identified by an AFI/SAFI pair and peer address. It contains information associated with route prefixes belonging to an address family. | |||||||||||||||||||||
| CcbgpPeer2AcceptedPrefixes | 1.3.6.1.4.1.9.9.187.1.2.8.1.1 | Counter32 | RO | 1 | |||||||||||||||||
column · Counter32 · read-only · current Number of accepted route prefixes on this connection, which belong to an address family. | |||||||||||||||||||||
| CcbgpPeer2DeniedPrefixes | 1.3.6.1.4.1.9.9.187.1.2.8.1.2 | Gauge32 | RO | 0 | |||||||||||||||||
column · Gauge32 · read-only · current This counter is incremented when a route prefix, which belongs to an address family, received on this connection is denied. It is initialized to zero when the connection is undergone a hard reset. | |||||||||||||||||||||
| CcbgpPeer2PrefixAdminLimit | 1.3.6.1.4.1.9.9.187.1.2.8.1.3 | Unsigned32 (1..4294967295) | RW | 524288 | |||||||||||||||||
column · Unsigned32 (1..4294967295) · read-write · current Max number of route prefixes accepted for an address family on this connection. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcbgpPeer2PrefixThreshold | 1.3.6.1.4.1.9.9.187.1.2.8.1.4 | Unsigned32 (1..100) | RW | 75 | |||||||||||||||||
column · Unsigned32 (1..100) · read-write · current Prefix threshold value (%) for an address family on this connection at which warning message stating the prefix count is crossed the threshold or corresponding SNMP notification is generated.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcbgpPeer2PrefixClearThreshold | 1.3.6.1.4.1.9.9.187.1.2.8.1.5 | Unsigned32 (1..100) | RO | 75 | |||||||||||||||||
column · Unsigned32 (1..100) · read-only · current Prefix threshold value (%) for an address family on this connection at which SNMP clear notification is generated if prefix threshold notification is already generated.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcbgpPeer2AdvertisedPrefixes | 1.3.6.1.4.1.9.9.187.1.2.8.1.6 | Gauge32 | RO | 2 | |||||||||||||||||
column · Gauge32 · read-only · current This counter is incremented when a route prefix, which belongs to an address family is advertised on this connection. It is initialized to zero when the connection is undergone a hard reset. | |||||||||||||||||||||
| CcbgpPeer2SuppressedPrefixes | 1.3.6.1.4.1.9.9.187.1.2.8.1.7 | Gauge32 | RO | 0 | |||||||||||||||||
column · Gauge32 · read-only · current This counter is incremented when a route prefix, which belongs to an address family is suppressed from being sent on this connection. It is initialized to zero when the connection is undergone a hard reset. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcbgpPeer2WithdrawnPrefixes | 1.3.6.1.4.1.9.9.187.1.2.8.1.8 | Gauge32 | RO | 0 | |||||||||||||||||
column · Gauge32 · read-only · current This counter is incremented when a route prefix, which belongs to an address family, is withdrawn on this connection. It is initialized to zero when the connection is undergone a hard reset. | |||||||||||||||||||||
| TcbgpPeer3Table | 1.3.6.1.4.1.9.9.187.1.2.9 | NA | |||||||||||||||||||
table · not-accessible · current BGP peer table. This table contains, one entry per BGP peer, information about the connections with BGP peers on per vrf basis | |||||||||||||||||||||
| RcbgpPeer3Entry | 1.3.6.1.4.1.9.9.187.1.2.9.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry containing information about the connection with a BGP peer in particular vrf | |||||||||||||||||||||
| CcbgpPeer3VrfId | 1.3.6.1.4.1.9.9.187.1.2.9.1.1 | Unsigned32 (0..65535) | RO | ||||||||||||||||||
column · Unsigned32 (0..65535) · read-only · current id of the vrf that peer is configured in. | |||||||||||||||||||||
| CcbgpPeer3Type | 1.3.6.1.4.1.9.9.187.1.2.9.1.2 | InetAddressType | RO | ||||||||||||||||||
column · InetAddressType · read-only · current Represents the type of Peer address stored in cbgpPeer3Entry. | |||||||||||||||||||||
| CcbgpPeer3RemoteAddr | 1.3.6.1.4.1.9.9.187.1.2.9.1.3 | InetAddress | RO | ||||||||||||||||||
column · InetAddress · read-only · current The remote IP address of this entry's BGP peer. | |||||||||||||||||||||
| CcbgpPeer3VrfName | 1.3.6.1.4.1.9.9.187.1.2.9.1.4 | SnmpAdminString (SIZE (1..32)) | RO | default | |||||||||||||||||
| CcbgpPeer3State | 1.3.6.1.4.1.9.9.187.1.2.9.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The BGP peer connection state.
| |||||||||||||||||||||
| CcbgpPeer3AdminStatus | 1.3.6.1.4.1.9.9.187.1.2.9.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Manual Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Manual Stop Event to be generated. This parameter can be used to restart BGP peer connections. Care should be used in providing write access to this object without adequate authentication.
| |||||||||||||||||||||
| CcbgpPeer3NegotiatedVersion | 1.3.6.1.4.1.9.9.187.1.2.9.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The negotiated version of BGP running between the two peers. This entry MUST be zero (0) unless the cbgpPeer3State is in the openconfirm or the established state. Note that legal values for this object are between 0 and 255. | |||||||||||||||||||||
| CcbgpPeer3LocalAddr | 1.3.6.1.4.1.9.9.187.1.2.9.1.8 | InetAddress | RO | ||||||||||||||||||
column · InetAddress · read-only · current The local IP address of this entry's BGP connection. | |||||||||||||||||||||
| CcbgpPeer3LocalPort | 1.3.6.1.4.1.9.9.187.1.2.9.1.9 | InetPortNumber | RO | ||||||||||||||||||
column · InetPortNumber · read-only · current The local port for the TCP connection between the BGP peers. | |||||||||||||||||||||
| CcbgpPeer3LocalAs | 1.3.6.1.4.1.9.9.187.1.2.9.1.10 | InetAutonomousSystemNumber | RO | ||||||||||||||||||
column · InetAutonomousSystemNumber · read-only · current The local AS number for this session. | |||||||||||||||||||||
| CcbgpPeer3LocalIdentifier | 1.3.6.1.4.1.9.9.187.1.2.9.1.11 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current The BGP Identifier of this entry's BGP peer. | |||||||||||||||||||||
| CcbgpPeer3RemotePort | 1.3.6.1.4.1.9.9.187.1.2.9.1.12 | InetPortNumber | RO | ||||||||||||||||||
column · InetPortNumber · read-only · current The remote port for the TCP connection between the BGP peers. Note that the objects cbgpPeer3LocalAddr, cbgpPeer3LocalPort, cbgpPeer3RemoteAddr, and cbgpPeer3RemotePort provide the appropriate reference to the standard MIB TCP connection table. | |||||||||||||||||||||
| CcbgpPeer3RemoteAs | 1.3.6.1.4.1.9.9.187.1.2.9.1.13 | InetAutonomousSystemNumber | RO | ||||||||||||||||||
column · InetAutonomousSystemNumber · read-only · current The remote autonomous system number received in the BGP OPEN message. | |||||||||||||||||||||
| CcbgpPeer3RemoteIdentifier | 1.3.6.1.4.1.9.9.187.1.2.9.1.14 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current The BGP Identifier of this entry's BGP peer. This entry MUST be 0.0.0.0 unless the cbgpPeer3State is in the openconfirm or the established state. | |||||||||||||||||||||
| CcbgpPeer3InUpdates | 1.3.6.1.4.1.9.9.187.1.2.9.1.15 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The number of BGP UPDATE messages received on this connection. | |||||||||||||||||||||
| CcbgpPeer3OutUpdates | 1.3.6.1.4.1.9.9.187.1.2.9.1.16 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The number of BGP UPDATE messages transmitted on this connection. | |||||||||||||||||||||
| CcbgpPeer3InTotalMessages | 1.3.6.1.4.1.9.9.187.1.2.9.1.17 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The total number of messages received from the remote peer on this connection. | |||||||||||||||||||||
| CcbgpPeer3OutTotalMessages | 1.3.6.1.4.1.9.9.187.1.2.9.1.18 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The total number of messages transmitted to the remote peer on this connection. | |||||||||||||||||||||
| CcbgpPeer3LastError | 1.3.6.1.4.1.9.9.187.1.2.9.1.19 | OCTET STRING (SIZE (2)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (2)) · read-only · current The last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode. | |||||||||||||||||||||
| CcbgpPeer3FsmEstablishedTransitions | 1.3.6.1.4.1.9.9.187.1.2.9.1.20 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The total number of times the BGP FSM transitioned into the established state for this peer. | |||||||||||||||||||||
| CcbgpPeer3FsmEstablishedTime | 1.3.6.1.4.1.9.9.187.1.2.9.1.21 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current This timer indicates how long (in seconds) this peer has been in the established state or how long since this peer was last in the established state. It is set to zero when a new peer is configured or when the router is booted.
| |||||||||||||||||||||
| CcbgpPeer3ConnectRetryInterval | 1.3.6.1.4.1.9.9.187.1.2.9.1.22 | Integer32 (1..65535) | RW | ||||||||||||||||||
column · Integer32 (1..65535) · read-write · current Time interval (in seconds) for the ConnectRetry timer. The suggested value for this timer is 120 seconds.
| |||||||||||||||||||||
| CcbgpPeer3HoldTime | 1.3.6.1.4.1.9.9.187.1.2.9.1.23 | Integer32 (0 | 3..65535) | RO | ||||||||||||||||||
column · Integer32 (0 | 3..65535) · read-only · current Time interval (in seconds) for the Hold Timer established with the peer. The value of this object is calculated by this BGP speaker, using the smaller of the values in cbgpPeer3HoldTimeConfigured and the Hold Time received in the OPEN message. This value must be at least three seconds if it is not zero (0). If the Hold Timer has not been established with the peer this object MUST have a value of zero (0). If the cbgpPeer3HoldTimeConfigured object has a value of (0), then this object MUST have a value of (0).
| |||||||||||||||||||||
| CcbgpPeer3KeepAlive | 1.3.6.1.4.1.9.9.187.1.2.9.1.24 | Integer32 (0 | 1..21845) | RO | ||||||||||||||||||
column · Integer32 (0 | 1..21845) · read-only · current Time interval (in seconds) for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with cbgpPeer3HoldTime, it has the same proportion that cbgpPeer3KeepAliveConfigured has, compared with cbgpPeer3HoldTimeConfigured. If the KeepAlive timer has not been established with the peer, this object MUST have a value of zero (0). If the of cbgpPeer3KeepAliveConfigured object has a value of (0), then this object MUST have a value of (0).
| |||||||||||||||||||||
| CcbgpPeer3HoldTimeConfigured | 1.3.6.1.4.1.9.9.187.1.2.9.1.25 | Integer32 (0 | 3..65535) | RW | ||||||||||||||||||
column · Integer32 (0 | 3..65535) · read-write · current Time interval (in seconds) for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (cbgpPeer3HoldTime) with the peer. This value must not be less than three seconds if it is not zero (0). If it is zero (0), the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds.
| |||||||||||||||||||||
| CcbgpPeer3KeepAliveConfigured | 1.3.6.1.4.1.9.9.187.1.2.9.1.26 | Integer32 (0 | 1..21845) | RW | ||||||||||||||||||
column · Integer32 (0 | 1..21845) · read-write · current Time interval (in seconds) for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages' frequency relative to the value specified in cbgpPeer3HoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by cbgpPeer3KeepAlive. A reasonable maximum value for this timer would be one third of that of cbgpPeer3HoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.
| |||||||||||||||||||||
| CcbgpPeer3MinASOriginationInterval | 1.3.6.1.4.1.9.9.187.1.2.9.1.27 | Integer32 (1..65535) | RW | ||||||||||||||||||
column · Integer32 (1..65535) · read-write · current Time interval (in seconds) for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds.
| |||||||||||||||||||||
| CcbgpPeer3MinRouteAdvertisementInterval | 1.3.6.1.4.1.9.9.187.1.2.9.1.28 | Integer32 (1..65535) | RW | ||||||||||||||||||
column · Integer32 (1..65535) · read-write · current Time interval (in seconds) for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds for EBGP connections and 5 seconds for IBGP connections.
| |||||||||||||||||||||
| CcbgpPeer3InUpdateElapsedTime | 1.3.6.1.4.1.9.9.187.1.2.9.1.29 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current Elapsed time (in seconds) since the last BGP UPDATE message was received from the peer. Each time cbgpPeer3InUpdates is incremented, the value of this object is set to zero (0).
| |||||||||||||||||||||
| CcbgpPeer3LastErrorTxt | 1.3.6.1.4.1.9.9.187.1.2.9.1.30 | SnmpAdminString | RO | ||||||||||||||||||
column · SnmpAdminString · read-only · current Implementation specific error description for bgpPeerLastErrorReceived. | |||||||||||||||||||||
| CcbgpPeer3PrevState | 1.3.6.1.4.1.9.9.187.1.2.9.1.31 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The BGP peer connection previous state.
| |||||||||||||||||||||
| NcbgpGlobal | 1.3.6.1.4.1.9.9.187.1.3 | ||||||||||||||||||||
| ScbgpNotifsEnable | 1.3.6.1.4.1.9.9.187.1.3.1 | Bits | RW | ||||||||||||||||||
scalar · Bits · read-write · current Indicates whether the specific notifications are enabled. If notifsEnable(0) bit is set to 1, then the notifications defined in ciscoBgp4NotificationsGroup1 are enabled; If notifsPeer2Enable(1) bit is set to 1, then the notifications defined in ciscoBgp4Peer2NotificationsGroup are enabled.
| |||||||||||||||||||||
| ScbgpLocalAs | 1.3.6.1.4.1.9.9.187.1.3.2 | InetAutonomousSystemNumber | RO | 0 | |||||||||||||||||
scalar · InetAutonomousSystemNumber · read-only · current The local autonomous system (AS) number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NciscoBgp4NotificationPrefix | 1.3.6.1.4.1.9.9.187.2 | ||||||||||||||||||||
| NciscoBgp4MIBConformance | 1.3.6.1.4.1.9.9.187.3 | ||||||||||||||||||||
| NciscoBgp4MIBCompliances | 1.3.6.1.4.1.9.9.187.3.1 | ||||||||||||||||||||
| MciscoBgp4MIBCompliance | 1.3.6.1.4.1.9.9.187.3.1.1 | deprecated | |||||||||||||||||||
compliance · deprecated The compliance statement for entities which implement the Cisco BGP4 MIB
| |||||||||||||||||||||
| MciscoBgp4MIBComplianceRev1 | 1.3.6.1.4.1.9.9.187.3.1.2 | deprecated | |||||||||||||||||||
compliance · deprecated The compliance statement for entities which implement the Cisco BGP4 MIB | |||||||||||||||||||||
| MciscoBgp4MIBComplianceRev2 | 1.3.6.1.4.1.9.9.187.3.1.3 | deprecated | |||||||||||||||||||
compliance · deprecated The compliance statement for entities which implement the Cisco BGP4 MIB | |||||||||||||||||||||
| MciscoBgp4MIBComplianceRev3 | 1.3.6.1.4.1.9.9.187.3.1.4 | ||||||||||||||||||||
compliance · current The compliance statement for entities which implement the Cisco BGP4 MIB | |||||||||||||||||||||
| NciscoBgp4MIBGroups | 1.3.6.1.4.1.9.9.187.3.2 | ||||||||||||||||||||
| GciscoBgp4RouteGroup | 1.3.6.1.4.1.9.9.187.3.2.1 | ||||||||||||||||||||
group · current A collection of objects providing information about routes received by BGP speaker. | |||||||||||||||||||||
| GciscoBgp4PeerGroup | 1.3.6.1.4.1.9.9.187.3.2.2 | deprecated | |||||||||||||||||||
group · deprecated A collection of objects providing information about routes received by BGP speaker. | |||||||||||||||||||||
| GciscoBgp4NotificationsGroup | 1.3.6.1.4.1.9.9.187.3.2.3 | deprecated | |||||||||||||||||||
| GciscoBgp4PeerGroup1 | 1.3.6.1.4.1.9.9.187.3.2.4 | ||||||||||||||||||||
group · current A collection of objects providing information about a BGP peer.
| |||||||||||||||||||||
| GciscoBgp4NotificationsGroup1 | 1.3.6.1.4.1.9.9.187.3.2.5 | ||||||||||||||||||||
group · current The collection of notifications related to BGP. | |||||||||||||||||||||
| GciscoBgp4Peer2Group | 1.3.6.1.4.1.9.9.187.3.2.6 | ||||||||||||||||||||
group · current A collection of objects providing information about a BGP peer.
| |||||||||||||||||||||
| GciscoBgp4Peer2NotificationsGroup | 1.3.6.1.4.1.9.9.187.3.2.7 | ||||||||||||||||||||
group · current A collection of notifications related to BGP. | |||||||||||||||||||||
| GciscoBgp4GlobalGroup | 1.3.6.1.4.1.9.9.187.3.2.8 | ||||||||||||||||||||
Textual conventions
CbgpNetworkAddressOCTET STRING (SIZE (0..255))Represents the Network Address prefix carried in the BGP UPDATE messages. In the following table, column 'Type' gives the kind of Network Layer address which will be stored in the object of this type based on the values of Address Family Identifier(AFI) and SAFI. AFI SAFI Type ipv4(1) unicast(1) IPv4 address ipv4(1) multicast(2) IPv4 address ipv4(1) vpn(128) VPN-IPv4 address ipv6(2) unicast(1) IPv6 address ipv6(2) multicast(2) IPv6 address ipv6(2) vpn(128) VPN-IPv6 address A VPN-IPv4 address is a 12-byte quantity, beginning with an 8-byte 'Route Distinguisher (RD)' and ending with a 4-byte IPv4 address. A VPN-IPv6 address is a 24-byte quantity, beginning with an 8-byte 'Route Distinguisher (RD)' and ending with a 16-byte IPv6 address.
CbgpSafiINTEGERevpn(70)multicast(2)unicast(1)unicastAndMulticast(3)vpn(128)Subsequent Address Family Identifier(SAFI) is used by BGP speaker to indicate the type of the the Network Layer Reachability Information(NLRI) being carried. RFC-2858 has defined the following values for SAFI. 1 - Network Layer Reachability Information used for unicast forwarding 2 - Network Layer Reachability Information used for multicast forwarding 3 - Network Layer Reachability Information used for both unicast and multicast forwarding. SAFI values 128 through 255 are for private use.
Traps / Notifications
- cbgpBackwardTransition
1.3.6.1.4.1.9.9.187.0.2 - cbgpFsmStateChange
1.3.6.1.4.1.9.9.187.0.1 - cbgpPeer2BackwardTransNotification
1.3.6.1.4.1.9.9.187.0.6 - cbgpPeer2BackwardTransition
1.3.6.1.4.1.9.9.187.0.8 - cbgpPeer2EstablishedNotification
1.3.6.1.4.1.9.9.187.0.5 - cbgpPeer2FsmStateChange
1.3.6.1.4.1.9.9.187.0.7 - cbgpPeer2PrefixThresholdClear
1.3.6.1.4.1.9.9.187.0.10 - cbgpPeer2PrefixThresholdExceeded
1.3.6.1.4.1.9.9.187.0.9 - cbgpPrefixThresholdClear
1.3.6.1.4.1.9.9.187.0.4 - cbgpPrefixThresholdExceeded
1.3.6.1.4.1.9.9.187.0.3