AIRESPACE-SWITCHING-MIB
Airespace, Inc (formerly 'Black Storm Networks')This MIB is intended to be implemented on all those
devices operating as Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
tunnel from Light-weight LWAPP Access Points.
This MIB provides configuration, statistics and
status information about the controller.
This includes controller statistics and provides
information such as Inventory, Trap logs, memory and
CPU. This MIB also provides configuration of CLI,
SNMP, LAG, DHCP, Spanning Tree, etc.
The relationship between controller and the LWAPP APs
can be depicted as follows:
+......+ +......+ +......+ +......+
+ + + + + + + +
+ CC + + CC + + CC + + CC +
+ + + + + + + +
+......+ +......+ +......+ +......+
.. . . .
.. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ AP + + AP + + AP + + AP + + AP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ MN + + MN + + MN + + MN + + MN +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
The LWAPP tunnel exists between the controller and
the APs. The MNs communicate with the APs through
the protocol defined by the 802.11 standard.
LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the configuration,
that includes the WLAN parameters, to the LWAPP APs.
The APs then encapsulate all the 802.11 frames from
wireless clients inside LWAPP frames and forward
the LWAPP frames to the controller.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends it to the controller to which
it is logically connected.
Basic Service Set Identifier (BSSID)
The identifier for the service set comprising of
all the 802.11 stations under the control of
one coordinating Access Point. This identifier
happens to be the MAC address of the dot11 radio
interface of the Access Point. The wireless
clients that associate with the Access Point
get the wired uplink through this particular
dot11 interface.
Central Controller ( CC )
The central entity that terminates the LWAPP protocol
tunnel from the LWAPP APs. Throughout this MIB,
this entity also referred to as 'controller'.
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the
communication between the Access Points and the
Central Controller.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless
network associated with an access point.
Station Management (SMT)
This term refers to the internal management of the
802.11 protocol operations by the AP to work
cooperatively with the other APs and 802.11
devices in the network.
REFERENCE
[1] Part 11 Wireless LAN Medium Access Control ( MAC )
and Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol.snmptranslate -m AIRESPACE-SWITCHING-MIB -Tpsnmpwalk -v2c -c <community> -m AIRESPACE-SWITCHING-MIB <host> 1.3.6.1.4.1.14179.1Imports
| AIRESPACE-REF-MIB | airespace |
|---|---|
| IANAifType-MIB | IANAifType |
| Q-BRIDGE-MIB | dot1qFdbId, dot1qVlanIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IbsnSwitching | 1.3.6.1.4.1.14179.1 | ||||||||||||||||
identity This MIB is intended to be implemented on all those
devices operating as Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
tunnel from Light-weight LWAPP Access Points.
This MIB provides configuration, statistics and
status information about the controller.
This includes controller statistics and provides
information such as Inventory, Trap logs, memory and
CPU. This MIB also provides configuration of CLI,
SNMP, LAG, DHCP, Spanning Tree, etc.
The relationship between controller and the LWAPP APs
can be depicted as follows:
+......+ +......+ +......+ +......+
+ + + + + + + +
+ CC + + CC + + CC + + CC +
+ + + + + + + +
+......+ +......+ +......+ +......+
.. . . .
.. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ AP + + AP + + AP + + AP + + AP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ MN + + MN + + MN + + MN + + MN +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
The LWAPP tunnel exists between the controller and
the APs. The MNs communicate with the APs through
the protocol defined by the 802.11 standard.
LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the configuration,
that includes the WLAN parameters, to the LWAPP APs.
The APs then encapsulate all the 802.11 frames from
wireless clients inside LWAPP frames and forward
the LWAPP frames to the controller.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends it to the controller to which
it is logically connected.
Basic Service Set Identifier (BSSID)
The identifier for the service set comprising of
all the 802.11 stations under the control of
one coordinating Access Point. This identifier
happens to be the MAC address of the dot11 radio
interface of the Access Point. The wireless
clients that associate with the Access Point
get the wired uplink through this particular
dot11 interface.
Central Controller ( CC )
The central entity that terminates the LWAPP protocol
tunnel from the LWAPP APs. Throughout this MIB,
this entity also referred to as 'controller'.
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the
communication between the Access Points and the
Central Controller.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless
network associated with an access point.
Station Management (SMT)
This term refers to the internal management of the
802.11 protocol operations by the AP to work
cooperatively with the other APs and 802.11
devices in the network.
REFERENCE
[1] Part 11 Wireless LAN Medium Access Control ( MAC )
and Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol. | |||||||||||||||||
| NagentInfoGroup | 1.3.6.1.4.1.14179.1.1 | ||||||||||||||||
| NagentInventoryGroup | 1.3.6.1.4.1.14179.1.1.1 | ||||||||||||||||
| SagentInventorySysDescription | 1.3.6.1.4.1.14179.1.1.1.1 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current The switch's Inventory system description. | |||||||||||||||||
| SagentInventoryMachineType | 1.3.6.1.4.1.14179.1.1.1.2 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current Type of the Machine used in the Switch. | |||||||||||||||||
| SagentInventoryMachineModel | 1.3.6.1.4.1.14179.1.1.1.3 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current The switch's Machine Model. | |||||||||||||||||
| SagentInventorySerialNumber | 1.3.6.1.4.1.14179.1.1.1.4 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current Serial number of the switch. | |||||||||||||||||
| SagentInventoryMaintenanceLevel | 1.3.6.1.4.1.14179.1.1.1.6 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current The switch's Inventory Maintenance Level | |||||||||||||||||
| SagentInventoryBurnedInMacAddress | 1.3.6.1.4.1.14179.1.1.1.9 | PhysAddress | RO | ||||||||||||||
scalar · PhysAddress · read-only · current Burned-In MAC Address | |||||||||||||||||
| SagentInventoryOperatingSystem | 1.3.6.1.4.1.14179.1.1.1.10 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current Operating System running on this unit | |||||||||||||||||
| SagentInventoryManufacturerName | 1.3.6.1.4.1.14179.1.1.1.12 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current Name of the switch manufacturer. | |||||||||||||||||
| SagentInventoryProductName | 1.3.6.1.4.1.14179.1.1.1.13 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current Name of the product. | |||||||||||||||||
| SagentInventoryProductVersion | 1.3.6.1.4.1.14179.1.1.1.14 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current Version of the product. | |||||||||||||||||
| SagentInventoryIsGigECardPresent | 1.3.6.1.4.1.14179.1.1.1.15 | TruthValue | RO | ||||||||||||||
scalar · TruthValue · read-only · current True if the Switch contains a Gigabit ethernet card . | |||||||||||||||||
| SagentInventoryIsCryptoCardPresent | 1.3.6.1.4.1.14179.1.1.1.16 | TruthValue | RO | ||||||||||||||
scalar · TruthValue · read-only · current True if the switch is carrying a Crypto card. | |||||||||||||||||
| SagentInventoryIsForeignAPSupported | 1.3.6.1.4.1.14179.1.1.1.17 | TruthValue | RO | ||||||||||||||
scalar · TruthValue · read-only · current States whether the switch supports third party Access Points. | |||||||||||||||||
| SagentInventoryMaxNumberOfAPsSupported | 1.3.6.1.4.1.14179.1.1.1.18 | Integer32 | RO | 50 | |||||||||||||
scalar · Integer32 · read-only · current Maximum number of APs supported with this Controller. Example values from LibreNMS test devices
| |||||||||||||||||
| SagentInventoryIsCryptoCard2Present | 1.3.6.1.4.1.14179.1.1.1.19 | TruthValue | RO | ||||||||||||||
scalar · TruthValue · read-only · current True if the switch is carrying second Crypto card for 4400 controller. | |||||||||||||||||
| SagentInventoryFipsModeEnabled | 1.3.6.1.4.1.14179.1.1.1.20 | TruthValue | RO | ||||||||||||||
scalar · TruthValue · read-only · current True if FIPS (Federal Information Processing Standards) mode has been enabled on the controller.False if FIPS mode has not been enabled. FIPS mode can only be enabled through console. | |||||||||||||||||
| NagentTrapLogGroup | 1.3.6.1.4.1.14179.1.1.2 | ||||||||||||||||
| SagentTrapLogTotal | 1.3.6.1.4.1.14179.1.1.2.1 | Integer32 | RO | ||||||||||||||
scalar · Integer32 · read-only · current The total number of traps sent since last reset. | |||||||||||||||||
| SagentTrapLogTotalSinceLastViewed | 1.3.6.1.4.1.14179.1.1.2.3 | Integer32 | RO | ||||||||||||||
scalar · Integer32 · read-only · current The number of traps sent since last viewed. | |||||||||||||||||
| TagentTrapLogTable | 1.3.6.1.4.1.14179.1.1.2.4 | NA | |||||||||||||||
table · not-accessible · current Agent Trap Log | |||||||||||||||||
| RagentTrapLogEntry | 1.3.6.1.4.1.14179.1.1.2.4.1 | NA | |||||||||||||||
| CagentTrapLogIndex | 1.3.6.1.4.1.14179.1.1.2.4.1.1 | Integer32 | RO | ||||||||||||||
column · Integer32 · read-only · current Unique index of trap entry | |||||||||||||||||
| CagentTrapLogSystemTime | 1.3.6.1.4.1.14179.1.1.2.4.1.2 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current System uptime when trap was sent. This entry shows how long the system has been up when the trap occurred. | |||||||||||||||||
| CagentTrapLogTrap | 1.3.6.1.4.1.14179.1.1.2.4.1.22 | OCTET STRING (SIZE (0..512)) | RO | ||||||||||||||
column · OCTET STRING (SIZE (0..512)) · read-only · current Description of the trap sent. | |||||||||||||||||
| SagentRadioUpDownTrapCount | 1.3.6.1.4.1.14179.1.1.2.5 | Integer32 | RO | ||||||||||||||
scalar · Integer32 · read-only · current The total number of AP Up/Down traps sent since last reset. | |||||||||||||||||
| SagentApAssociateDisassociateTrapCount | 1.3.6.1.4.1.14179.1.1.2.6 | Integer32 | RO | ||||||||||||||
scalar · Integer32 · read-only · current The total number of AP Associate/Disassociate traps sent since last reset. | |||||||||||||||||
| SagentApLoadProfileFailTrapCount | 1.3.6.1.4.1.14179.1.1.2.7 | Integer32 | RO | ||||||||||||||
scalar · Integer32 · read-only · current The total number of AP Load Profile Failure traps sent since last reset. | |||||||||||||||||
| SagentApNoiseProfileFailTrapCount | 1.3.6.1.4.1.14179.1.1.2.8 | Integer32 | RO | ||||||||||||||
scalar · Integer32 · read-only · current The total number of AP Noise Profile Failure traps sent since last reset. | |||||||||||||||||
| SagentApInterferenceProfileFailTrapCount | 1.3.6.1.4.1.14179.1.1.2.9 | Integer32 | RO | ||||||||||||||
scalar · Integer32 · read-only · current The total number of AP Interference Profile Failure traps sent since last reset. | |||||||||||||||||
| SagentApCoverageProfileFailTrapCount | 1.3.6.1.4.1.14179.1.1.2.10 | Integer32 | RO | ||||||||||||||
scalar · Integer32 · read-only · current The total number of AP Coverge Profile Failure traps sent since last reset. | |||||||||||||||||
| NagentSwitchInfoGroup | 1.3.6.1.4.1.14179.1.1.3 | ||||||||||||||||
| SagentSwitchInfoLwappTransportMode | 1.3.6.1.4.1.14179.1.1.3.1 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The LWAPP transport mode specifies if the switch is operating in Layer2 or Layer3 mode. This attribute gives the current mode the switch is operating on.
| |||||||||||||||||
| SagentSwitchInfoPowerSupply1Present | 1.3.6.1.4.1.14179.1.1.3.2 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current This is to indicate if the switch has Power Supply 1 present on it. This is applicable to the 4200 series and will always return true for the earlier device versions.
| |||||||||||||||||
| SagentSwitchInfoPowerSupply1Operational | 1.3.6.1.4.1.14179.1.1.3.3 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current This is to indicate if the switch's Power Supply 1 is operational. This is applicable to the 4200 series and will always return true for the earlier device versions.
| |||||||||||||||||
| SagentSwitchInfoPowerSupply2Present | 1.3.6.1.4.1.14179.1.1.3.4 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current This is to indicate if the switch has Power Supply 2 present on it. This is applicable to the 4200 series and will always return false for the earlier device versions.
| |||||||||||||||||
| SagentSwitchInfoPowerSupply2Operational | 1.3.6.1.4.1.14179.1.1.3.5 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current This is to indicate if the switch's Power Supply 2 is operational.This is applicable to the 4200 series and will always return false for the earlier device versions.
| |||||||||||||||||
| NagentProductGroup | 1.3.6.1.4.1.14179.1.1.4 | ||||||||||||||||
| NproductGroup1 | 1.3.6.1.4.1.14179.1.1.4.1 | ||||||||||||||||
| NproductGroup2 | 1.3.6.1.4.1.14179.1.1.4.2 | ||||||||||||||||
| NproductGroup3 | 1.3.6.1.4.1.14179.1.1.4.3 | ||||||||||||||||
| NproductGroup4 | 1.3.6.1.4.1.14179.1.1.4.4 | ||||||||||||||||
| NagentResourceInfoGroup | 1.3.6.1.4.1.14179.1.1.5 | ||||||||||||||||
| SagentCurrentCPUUtilization | 1.3.6.1.4.1.14179.1.1.5.1 | INTEGER (0..100) | RO | 42 | |||||||||||||
scalar · INTEGER (0..100) · read-only · current Current CPU Load of the switch in percentage. Example values from LibreNMS test devices
| |||||||||||||||||
| SagentTotalMemory | 1.3.6.1.4.1.14179.1.1.5.2 | Integer32 | RO | 8192 | |||||||||||||
scalar · Integer32 · read-only · current Total RAM of the switch in Kbytes. Example values from LibreNMS test devices
| |||||||||||||||||
| SagentFreeMemory | 1.3.6.1.4.1.14179.1.1.5.3 | Integer32 | RO | 432 | |||||||||||||
scalar · Integer32 · read-only · current Free RAM of the switch in Kbytes. Example values from LibreNMS test devices
| |||||||||||||||||
| NagentWcpInfoGroup | 1.3.6.1.4.1.14179.1.1.6 | ||||||||||||||||
| SagentWcpDeviceName | 1.3.6.1.4.1.14179.1.1.6.1 | DisplayString (SIZE (0..32)) | RO | ||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-only · current This is the name of the device this controller is residing on. | |||||||||||||||||
| SagentWcpSlotNumber | 1.3.6.1.4.1.14179.1.1.6.2 | Unsigned32 (1..16) | RO | ||||||||||||||
scalar · Unsigned32 (1..16) · read-only · current The slot number on the Wcp Device that this controller is residing on. | |||||||||||||||||
| SagentWcpPortNumber | 1.3.6.1.4.1.14179.1.1.6.3 | Unsigned32 (1..2) | RO | ||||||||||||||
scalar · Unsigned32 (1..2) · read-only · current The port number on the Wcp Device that this controller is residing on. | |||||||||||||||||
| SagentWcpPeerPortNumber | 1.3.6.1.4.1.14179.1.1.6.4 | Unsigned32 (1..2) | RO | ||||||||||||||
scalar · Unsigned32 (1..2) · read-only · current The port number of this controller's peer on the same slot on Wcp Device that this controller is residing on. | |||||||||||||||||
| SagentWcpPeerIpAddress | 1.3.6.1.4.1.14179.1.1.6.5 | IpAddress | RO | ||||||||||||||
scalar · IpAddress · read-only · current The IP Address of this controller's peer on the same slot on Wcp Device that this controller is residing on. | |||||||||||||||||
| SagentWcpControllerTableChecksum | 1.3.6.1.4.1.14179.1.1.6.6 | Integer32 | RO | ||||||||||||||
scalar · Integer32 · read-only · current This is the checksum that tracks the changes in the agentWcpControllerInfoTable. If there is any change in the information on this table, the checksum changes. | |||||||||||||||||
| TagentWcpControllerInfoTable | 1.3.6.1.4.1.14179.1.1.6.7 | NA | |||||||||||||||
table · not-accessible · current A table of the wireless controllers on a WCP device. | |||||||||||||||||
| RagentWcpControllerInfoEntry | 1.3.6.1.4.1.14179.1.1.6.7.1 | NA | |||||||||||||||
row · not-accessible · current Entry for a wireless controller on a WCP device. | |||||||||||||||||
| CagentWcpControllerInfoSlotNumber | 1.3.6.1.4.1.14179.1.1.6.7.1.1 | Unsigned32 (1..16) | RO | ||||||||||||||
column · Unsigned32 (1..16) · read-only · current The slot number on the Wcp device that a controller is residing on. | |||||||||||||||||
| CagentWcpControllerInfoPortNumber | 1.3.6.1.4.1.14179.1.1.6.7.1.2 | Unsigned32 (1..2) | RO | ||||||||||||||
column · Unsigned32 (1..2) · read-only · current The port number on the Wcp Device that a controller is residing on. | |||||||||||||||||
| CagentWcpControllerInfoIpAddress | 1.3.6.1.4.1.14179.1.1.6.7.1.10 | IpAddress | RO | ||||||||||||||
column · IpAddress · read-only · current The management IP Address of a controller. | |||||||||||||||||
| NagentConfigGroup | 1.3.6.1.4.1.14179.1.2 | ||||||||||||||||
| NagentCLIConfigGroup | 1.3.6.1.4.1.14179.1.2.1 | ||||||||||||||||
| TagentLoginSessionTable | 1.3.6.1.4.1.14179.1.2.1.1 | NA | |||||||||||||||
table · not-accessible · current A table of the switch's login session | |||||||||||||||||
| RagentLoginSessionEntry | 1.3.6.1.4.1.14179.1.2.1.1.1 | NA | |||||||||||||||
| CagentLoginSessionIndex | 1.3.6.1.4.1.14179.1.2.1.1.1.1 | Integer32 | RO | ||||||||||||||
column · Integer32 · read-only · current Agent Login Session Index of the switch | |||||||||||||||||
| CagentLoginSessionUserName | 1.3.6.1.4.1.14179.1.2.1.1.1.2 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current Agent Login Session UserName of the switch | |||||||||||||||||
| CagentLoginSessionIPAddress | 1.3.6.1.4.1.14179.1.2.1.1.1.3 | IpAddress | RO | ||||||||||||||
column · IpAddress · read-only · current Agent Login Session IP Address of the switch | |||||||||||||||||
| CagentLoginSessionConnectionType | 1.3.6.1.4.1.14179.1.2.1.1.1.4 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Agent Login Session Connection Type of the switch
| |||||||||||||||||
| CagentLoginSessionIdleTime | 1.3.6.1.4.1.14179.1.2.1.1.1.5 | TimeTicks | RO | ||||||||||||||
column · TimeTicks · read-only · current Agent Login Session Idle Time of the switch | |||||||||||||||||
| CagentLoginSessionSessionTime | 1.3.6.1.4.1.14179.1.2.1.1.1.6 | TimeTicks | RO | ||||||||||||||
column · TimeTicks · read-only · current Agent Login Session Time of the switch | |||||||||||||||||
| CagentLoginSessionStatus | 1.3.6.1.4.1.14179.1.2.1.1.1.26 | RowStatus | RW | ||||||||||||||
column · RowStatus · read-write · current Status of the user.
active(1) - This connection is active.
destroy(6) - Set to this value to disconnect
this user. | |||||||||||||||||
| NagentTelnetConfigGroup | 1.3.6.1.4.1.14179.1.2.1.2 | ||||||||||||||||
| SagentTelnetLoginTimeout | 1.3.6.1.4.1.14179.1.2.1.2.1 | Integer32 (0..160) | RW | ||||||||||||||
scalar · Integer32 (0..160) · read-write · current Telnet login timeout (minutes) Config telnet timeout will set the telnet session timeout value. A session is active as long as the session has not remained idle for the value set. Specify a value from 0 to 160. A value of 0 indicates that a Telnet session remains active indefinitely. Note: Changing the timeout value for active sessions does not become effective until the session is reaccessed. Any keystroke will also activate the new timeout duration. | |||||||||||||||||
| SagentTelnetMaxSessions | 1.3.6.1.4.1.14179.1.2.1.2.2 | Integer32 (0..5) | RW | ||||||||||||||
scalar · Integer32 (0..5) · read-write · current Maximum number of Telnet Sessions Config telnet maxsessions is an integer value from 0 to 5 that specifies the maximum number of telnet sessions that can be established. If the value is 0, no Telnet session can be established. | |||||||||||||||||
| SagentTelnetAllowNewMode | 1.3.6.1.4.1.14179.1.2.1.2.3 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Allow new telnet sessions (enable or disable) Config telnet disable means that no new Telnet sessions are to be established. Any already established session remains active until the session is ended or an abnormal network error ends it.
| |||||||||||||||||
| SagentSSHAllowNewMode | 1.3.6.1.4.1.14179.1.2.1.2.4 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Allow new SSH sessions (enable or disable) Config SSH disable means that no new SSH sessions are to be established. Any already established session remains active until the session is ended or an abnormal network error ends it.
| |||||||||||||||||
| NagentSerialGroup | 1.3.6.1.4.1.14179.1.2.1.5 | ||||||||||||||||
| SagentSerialTimeout | 1.3.6.1.4.1.14179.1.2.1.5.1 | Integer32 | RW | ||||||||||||||
scalar · Integer32 · read-write · current Agent Serial Timeout | |||||||||||||||||
| SagentSerialBaudrate | 1.3.6.1.4.1.14179.1.2.1.5.2 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Agent Serial Baudrate
| |||||||||||||||||
| SagentSerialCharacterSize | 1.3.6.1.4.1.14179.1.2.1.5.3 | Integer32 | RO | ||||||||||||||
scalar · Integer32 · read-only · current Agent Serial Character Size | |||||||||||||||||
| SagentSerialHWFlowControlMode | 1.3.6.1.4.1.14179.1.2.1.5.4 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current Agent Serial Hardware Flow Control.
| |||||||||||||||||
| SagentSerialStopBits | 1.3.6.1.4.1.14179.1.2.1.5.5 | Integer32 | RO | ||||||||||||||
scalar · Integer32 · read-only · current Agent Serial Stop Bits | |||||||||||||||||
| SagentSerialParityType | 1.3.6.1.4.1.14179.1.2.1.5.6 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current Agent Serial Parity Type
| |||||||||||||||||
| NagentLagConfigGroup | 1.3.6.1.4.1.14179.1.2.2 | ||||||||||||||||
| SagentLagConfigCreate | 1.3.6.1.4.1.14179.1.2.2.1 | DisplayString (SIZE (1..15)) | RW | obsolete | |||||||||||||
scalar · DisplayString (SIZE (1..15)) · read-write · obsolete Agent Lag Create. When this object is set with a non-empty string, a new lag will be created.if possible with the entered string as it's name. | |||||||||||||||||
| TagentLagSummaryConfigTable | 1.3.6.1.4.1.14179.1.2.2.2 | NA | obsolete | ||||||||||||||
table · not-accessible · obsolete A summary table of the switch's lag config entries | |||||||||||||||||
| RagentLagSummaryConfigEntry | 1.3.6.1.4.1.14179.1.2.2.2.1 | NA | obsolete | ||||||||||||||
| CagentLagSummaryName | 1.3.6.1.4.1.14179.1.2.2.2.1.1 | DisplayString (SIZE (1..15)) | RC | obsolete | |||||||||||||
column · DisplayString (SIZE (1..15)) · read-create · obsolete Agent Lag Name | |||||||||||||||||
| CagentLagSummaryLagIndex | 1.3.6.1.4.1.14179.1.2.2.2.1.2 | Integer32 | RO | obsolete | |||||||||||||
column · Integer32 · read-only · obsolete Agent Lag If Index | |||||||||||||||||
| CagentLagSummaryFlushTimer | 1.3.6.1.4.1.14179.1.2.2.2.1.3 | Integer32 | RC | obsolete | |||||||||||||
column · Integer32 · read-create · obsolete Agent Lag Flush Timer | |||||||||||||||||
| CagentLagSummaryLinkTrap | 1.3.6.1.4.1.14179.1.2.2.2.1.4 | INTEGER | RC | obsolete | |||||||||||||
column · INTEGER · read-create · obsolete Agent Lag Link Trap
| |||||||||||||||||
| CagentLagSummaryAdminMode | 1.3.6.1.4.1.14179.1.2.2.2.1.5 | INTEGER | RC | obsolete | |||||||||||||
column · INTEGER · read-create · obsolete Agent Lag Admin Mode
| |||||||||||||||||
| CagentLagSummaryStpMode | 1.3.6.1.4.1.14179.1.2.2.2.1.6 | INTEGER | RC | obsolete | |||||||||||||
column · INTEGER · read-create · obsolete Agent Lag STP Mode
| |||||||||||||||||
| CagentLagSummaryAddPort | 1.3.6.1.4.1.14179.1.2.2.2.1.7 | Integer32 | RC | obsolete | |||||||||||||
column · Integer32 · read-create · obsolete Agent Lag Add Port. Note: agentPortType for the port to be added must be full duplex and the same speed as previously added port(s), if any. | |||||||||||||||||
| CagentLagSummaryDeletePort | 1.3.6.1.4.1.14179.1.2.2.2.1.8 | Integer32 | RC | obsolete | |||||||||||||
column · Integer32 · read-create · obsolete Agent Lag Delete Port | |||||||||||||||||
| CagentLagSummaryPortsBitMask | 1.3.6.1.4.1.14179.1.2.2.2.1.9 | Unsigned32 | RC | obsolete | |||||||||||||
column · Unsigned32 · read-create · obsolete Agent Lag Member Ports in bit mask representation | |||||||||||||||||
| CagentLagSummaryStatus | 1.3.6.1.4.1.14179.1.2.2.2.1.30 | RowStatus | RC | obsolete | |||||||||||||
column · RowStatus · read-create · obsolete Agent Lag Status. active(1) - This Lag is enabled. destroy(6) - Set to this value to remove the Lag. | |||||||||||||||||
| TagentLagDetailedConfigTable | 1.3.6.1.4.1.14179.1.2.2.3 | NA | obsolete | ||||||||||||||
table · not-accessible · obsolete A detailed table of the switch's lag config entries | |||||||||||||||||
| RagentLagDetailedConfigEntry | 1.3.6.1.4.1.14179.1.2.2.3.1 | NA | obsolete | ||||||||||||||
row · not-accessible · obsolete Switch's lag config entry | |||||||||||||||||
| CagentLagDetailedLagIndex | 1.3.6.1.4.1.14179.1.2.2.3.1.1 | Integer32 | RO | obsolete | |||||||||||||
column · Integer32 · read-only · obsolete Lag index | |||||||||||||||||
| CagentLagDetailedIfIndex | 1.3.6.1.4.1.14179.1.2.2.3.1.2 | Integer32 | RO | obsolete | |||||||||||||
column · Integer32 · read-only · obsolete Lag port index | |||||||||||||||||
| CagentLagDetailedPortSpeed | 1.3.6.1.4.1.14179.1.2.2.3.1.22 | OBJECT IDENTIFIER | RO | obsolete | |||||||||||||
column · OBJECT IDENTIFIER · read-only · obsolete Lag port speed. See agentPortType for description and list of valid values. | |||||||||||||||||
| SagentLagConfigMode | 1.3.6.1.4.1.14179.1.2.2.4 | INTEGER | RW | obsolete | |||||||||||||
scalar · INTEGER · read-write · obsolete The Lag Mode on the 4400 series controller. When it is on, all the gigabit ports are bound to one aggregated link.
| |||||||||||||||||
| NagentNetworkConfigGroup | 1.3.6.1.4.1.14179.1.2.3 | ||||||||||||||||
| SagentNetworkIPAddress | 1.3.6.1.4.1.14179.1.2.3.1 | IpAddress | RW | ||||||||||||||
scalar · IpAddress · read-write · current The switch's network ip address | |||||||||||||||||
| SagentNetworkSubnetMask | 1.3.6.1.4.1.14179.1.2.3.2 | IpAddress | RW | ||||||||||||||
scalar · IpAddress · read-write · current The switch's network subnet mask | |||||||||||||||||
| SagentNetworkDefaultGateway | 1.3.6.1.4.1.14179.1.2.3.3 | IpAddress | RW | ||||||||||||||
scalar · IpAddress · read-write · current The switch's network default gateway | |||||||||||||||||
| SagentNetworkBurnedInMacAddress | 1.3.6.1.4.1.14179.1.2.3.4 | PhysAddress | RO | ||||||||||||||
scalar · PhysAddress · read-only · current The switch's Burned-In MAC address | |||||||||||||||||
| SagentNetworkConfigProtocol | 1.3.6.1.4.1.14179.1.2.3.7 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The switch's network config protocol
| |||||||||||||||||
| SagentNetworkWebMode | 1.3.6.1.4.1.14179.1.2.3.8 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The switch's web access mode.
| |||||||||||||||||
| SagentNetworkSecureWebMode | 1.3.6.1.4.1.14179.1.2.3.9 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current If https is enable or not provided web mode is enabled
| |||||||||||||||||
| SagentNetworkMulticastMode | 1.3.6.1.4.1.14179.1.2.3.10 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Switch's ethernet multicast support.
disable- multicast is disabled
multicast - Multicast is enabled.
unicast- Controller will convert multicast to
unicast packet.
| |||||||||||||||||
| SagentNetworkDsPortNumber | 1.3.6.1.4.1.14179.1.2.3.11 | Integer32 | RW | ||||||||||||||
scalar · Integer32 · read-write · current The switch's distribution port number. | |||||||||||||||||
| SagentNetworkUserIdleTimeout | 1.3.6.1.4.1.14179.1.2.3.12 | Unsigned32 (10..2147483647) | RW | ||||||||||||||
scalar · Unsigned32 (10..2147483647) · read-write · current Sets the idle user timeout. | |||||||||||||||||
| SagentNetworkArpTimeout | 1.3.6.1.4.1.14179.1.2.3.13 | Unsigned32 (10..2147483647) | RW | ||||||||||||||
scalar · Unsigned32 (10..2147483647) · read-write · current Sets the ARP entry timeout. | |||||||||||||||||
| SagentNetworkManagementVlan | 1.3.6.1.4.1.14179.1.2.3.14 | Unsigned32 (0..4095) | RW | ||||||||||||||
scalar · Unsigned32 (0..4095) · read-write · current VLAN ID of the network management interface. | |||||||||||||||||
| SagentNetworkGvrpStatus | 1.3.6.1.4.1.14179.1.2.3.15 | INTEGER | RW | obsolete | |||||||||||||
scalar · INTEGER · read-write · obsolete The state of GVRP operation on the Switch. The value enabled(1) indicates that GVRP is enabled on this port, as long as dot1qGvrpStatus is also enabled for this device. When disabled(2) but dot1qGvrpStatus is still enabled for the device, GVRP is disabled on this port: any GVRP packets received will be silently discarded and no GVRP registrations will be propagated from other ports. This object affects all GVRP Applicant and Registrar state machines on this port. A transition from disabled(2) to enabled(1) will cause a reset of all GVRP state machines on this port.(Attribute No longer supported)
| |||||||||||||||||
| SagentNetworkAllowMgmtViaWireless | 1.3.6.1.4.1.14179.1.2.3.16 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current This states whether Management via wireless is allowed or not.
| |||||||||||||||||
| SagentNetworkBroadcastSsidMode | 1.3.6.1.4.1.14179.1.2.3.17 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current This mode when enabled allows WLAN SSIDs to be broadcasted.
| |||||||||||||||||
| SagentNetworkSecureWebPassword | 1.3.6.1.4.1.14179.1.2.3.18 | OCTET STRING (SIZE (1..32)) | RW | ||||||||||||||
scalar · OCTET STRING (SIZE (1..32)) · read-write · current SSL Certificate Password. This can be optionally set while downloading SSL certificates of type Web Admin and Web Authentication | |||||||||||||||||
| SagentNetworkWebAdminCertType | 1.3.6.1.4.1.14179.1.2.3.19 | DisplayString (SIZE (1..80)) | RO | ||||||||||||||
scalar · DisplayString (SIZE (1..80)) · read-only · current Type of currently existing Web Admin Certificate installed on the Switch. It could be 'Empty' if the certificate is not present, 'Locally Generated' if the certificate is locally generated or it could have a name if it is downloaded externally. | |||||||||||||||||
| SagentNetworkWebAdminCertRegenerateCmdInvoke | 1.3.6.1.4.1.14179.1.2.3.20 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current This command when set to 'activate' will regenerate a Web Administration Certificate Locally that will replace the existing certificate.
| |||||||||||||||||
| SagentNetworkWebAuthCertType | 1.3.6.1.4.1.14179.1.2.3.21 | DisplayString (SIZE (1..80)) | RO | ||||||||||||||
scalar · DisplayString (SIZE (1..80)) · read-only · current Type of currently exisitng Web Authentication Certificate installed on the Switch. It could be 'Empty' if the certificate is not present, 'Locally Generated' if the certificate is locally generated or it could have a name if it is downloaded externally. | |||||||||||||||||
| SagentNetworkWebAuthCertRegenerateCmdInvoke | 1.3.6.1.4.1.14179.1.2.3.22 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current This command when set to 'activate' will regenerate a Web Authentication Certificate Locally that will replace the existing certificate.
| |||||||||||||||||
| TagentNetworkRouteConfigTable | 1.3.6.1.4.1.14179.1.2.3.23 | NA | |||||||||||||||
table · not-accessible · current A table of the switch's Network Route entries | |||||||||||||||||
| RagentNetworkRouteConfigEntry | 1.3.6.1.4.1.14179.1.2.3.23.1 | NA | |||||||||||||||
| CagentNetworkRouteIPAddress | 1.3.6.1.4.1.14179.1.2.3.23.1.1 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current Network Route IP Address. | |||||||||||||||||
| CagentNetworkRouteIPNetmask | 1.3.6.1.4.1.14179.1.2.3.23.1.2 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current Network Route IP Netmask. | |||||||||||||||||
| CagentNetworkRouteGateway | 1.3.6.1.4.1.14179.1.2.3.23.1.3 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current Network Route IP Gateway. | |||||||||||||||||
| CagentNetworkRouteStatus | 1.3.6.1.4.1.14179.1.2.3.23.1.23 | RowStatus | RC | ||||||||||||||
column · RowStatus · read-create · current Network Route Row Status. | |||||||||||||||||
| SagentNetworkPeerToPeerBlockingMode | 1.3.6.1.4.1.14179.1.2.3.24 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Mobile Peer to Peer Blocking mode on the switch.
| |||||||||||||||||
| SagentNetworkMulticastGroupAddress | 1.3.6.1.4.1.14179.1.2.3.25 | IpAddress | RW | ||||||||||||||
scalar · IpAddress · read-write · current Multicast group address for access points. | |||||||||||||||||
| NagentServicePortConfigGroup | 1.3.6.1.4.1.14179.1.2.4 | ||||||||||||||||
| SagentServicePortIPAddress | 1.3.6.1.4.1.14179.1.2.4.1 | IpAddress | RW | obsolete | |||||||||||||
scalar · IpAddress · read-write · obsolete The switch's Service Port IP address. (Service-port interface use is recommended instead of this group) | |||||||||||||||||
| SagentServicePortSubnetMask | 1.3.6.1.4.1.14179.1.2.4.2 | IpAddress | RW | obsolete | |||||||||||||
scalar · IpAddress · read-write · obsolete The switch's Service Port subnet mask. (Service-port interface in agentInterfaceConfigTable is recommended instead of this group) | |||||||||||||||||
| SagentServicePortDefaultGateway | 1.3.6.1.4.1.14179.1.2.4.3 | IpAddress | RW | obsolete | |||||||||||||
scalar · IpAddress · read-write · obsolete Not Supported for release 1.0. The switch's Service Port default gateway. (Service-port interface in agentInterfaceConfigTable is recommended instead of this group) | |||||||||||||||||
| SagentServicePortBurnedInMacAddress | 1.3.6.1.4.1.14179.1.2.4.4 | PhysAddress | RO | obsolete | |||||||||||||
scalar · PhysAddress · read-only · obsolete The switch's Service Port Burned-In MAC address (Service-port interface in agentInterfaceConfigTable is recommended instead of this group) | |||||||||||||||||
| SagentServicePortConfigProtocol | 1.3.6.1.4.1.14179.1.2.4.5 | INTEGER | RW | obsolete | |||||||||||||
scalar · INTEGER · read-write · obsolete The switch's Service Port config protocol (Service-port interface in agentInterfaceConfigTable is recommended instead of this group)
| |||||||||||||||||
| NagentSnmpConfigGroup | 1.3.6.1.4.1.14179.1.2.5 | ||||||||||||||||
| SagentSnmpTrapPortNumber | 1.3.6.1.4.1.14179.1.2.5.1 | Unsigned32 (1..65534) | RW | ||||||||||||||
scalar · Unsigned32 (1..65534) · read-write · current Snmp Trap Port Number | |||||||||||||||||
| SagentSnmpVersion1Status | 1.3.6.1.4.1.14179.1.2.5.2 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Snmp Version 1 Status
| |||||||||||||||||
| SagentSnmpVersion2cStatus | 1.3.6.1.4.1.14179.1.2.5.3 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Snmp Version 2c Status
| |||||||||||||||||
| TagentSnmpCommunityConfigTable | 1.3.6.1.4.1.14179.1.2.5.5 | NA | |||||||||||||||
table · not-accessible · current A table of the switch's SNMP community Config entries | |||||||||||||||||
| RagentSnmpCommunityConfigEntry | 1.3.6.1.4.1.14179.1.2.5.5.1 | NA | |||||||||||||||
| CagentSnmpCommunityName | 1.3.6.1.4.1.14179.1.2.5.5.1.1 | DisplayString (SIZE (1..16)) | RC | ||||||||||||||
column · DisplayString (SIZE (1..16)) · read-create · current The switch's Snmp Community Name This name identifies each SNMP community; the name can be up to 16 characters, and it is case-sensitive. Community names in the SNMP community must be unique. If you make multiple entries using the same community name, the first entry is kept and processed and all duplicate entries are ignored. | |||||||||||||||||
| CagentSnmpCommunityIPAddress | 1.3.6.1.4.1.14179.1.2.5.5.1.2 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current The switch's Snmp Community IP Address Client IP Address - This attribute is an IP address (or portion thereof) from which this device will accept SNMP packets with the associated community. The requesting entity's IP address is logical-ANDed with the Client IP Mask and the result must match the Client IP Address. Note: If the Client IP Mask is set to 0.0.0.0, a Client IP Address of 0.0.0.0 matches all IP addresses. | |||||||||||||||||
| CagentSnmpCommunityIPMask | 1.3.6.1.4.1.14179.1.2.5.5.1.3 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current The switch's Snmp Community IP Mask Client IP Mask - This attribute is a mask to be logical-ANDed with the requesting entity's IP address before comparison with the Client IP Address. If the result matches with Client IP Address then the address is an authenticated IP address. For example, if the Client IP Address is 9.47.128.0 and the corresponding Client IP Mask is 255.255.255.0, a range of incoming IP addresses would match, that is, the incoming IP addresses could be a value in the following range: 9.47.128.0 to 9.47.128.255. To have a specific IP address be the only authenticated IP address, set the Client IP Address to the required IP address and set the Client IP Mask to 255.255.255.255. | |||||||||||||||||
| CagentSnmpCommunityAccessMode | 1.3.6.1.4.1.14179.1.2.5.5.1.4 | INTEGER | RC | ||||||||||||||
column · INTEGER · read-create · current The switch's Snmp Community Access Mode Access Mode - This value can be readOnly or readWrite. A community with a read-only access allows for switch information to be displayed. A community with a readWrite access allows for configuration changes to be made and for information to be displayed.
| |||||||||||||||||
| CagentSnmpCommunityEnabled | 1.3.6.1.4.1.14179.1.2.5.5.1.5 | INTEGER | RC | ||||||||||||||
column · INTEGER · read-create · current If community is Enabled
| |||||||||||||||||
| CagentSnmpCommunityStatus | 1.3.6.1.4.1.14179.1.2.5.5.1.25 | RowStatus | RC | ||||||||||||||
column · RowStatus · read-create · current The switch's Snmp Community Status.
active(1) - This community is active,
allowing SNMP manager
associated
with this community to manage
the switch according to its
access right.
notInService(2) - This community is not active;
no
SNMP requests using this
community will be accepted. In
this case the SNMP manager
associated with this community
cannot manage the switch until
the Status is changed back to
active(1).
config(3) - The community Status must be
set to this value in order to
configure it. When creating a
new community entry, initial
Status will be set to this
value.
destroy(4) - Set to this value to remove
the
community from the agent. | |||||||||||||||||
| TagentSnmpTrapReceiverConfigTable | 1.3.6.1.4.1.14179.1.2.5.6 | NA | |||||||||||||||
table · not-accessible · current Trap messages are sent across a network to an SNMP Network Manager. These messages alert the manager to events occurring within the switch or on the network. Up to six simultaneous trap receivers are supported. | |||||||||||||||||
| RagentSnmpTrapReceiverConfigEntry | 1.3.6.1.4.1.14179.1.2.5.6.1 | NA | |||||||||||||||
row · not-accessible · current Switch's Snmp Trap Receiver Config entry | |||||||||||||||||
| CagentSnmpTrapReceiverName | 1.3.6.1.4.1.14179.1.2.5.6.1.1 | OCTET STRING (SIZE (1..16)) | RC | ||||||||||||||
column · OCTET STRING (SIZE (1..16)) · read-create · current The switch's Snmp Trap Receiver Name. This is the name of the remote network manager. the name can be up to 16 characters, and is case-sensitive. | |||||||||||||||||
| CagentSnmpTrapReceiverIPAddress | 1.3.6.1.4.1.14179.1.2.5.6.1.2 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current SNMP network Manager IP Address. The IP Address traps will be sent to. Each IP address parameter is four integer numbers. The numbers range from 0 to 255. After creation of entry IP Address cannot be changed. | |||||||||||||||||
| CagentSnmpTrapReceiverEnabled | 1.3.6.1.4.1.14179.1.2.5.6.1.3 | INTEGER | RC | ||||||||||||||
column · INTEGER · read-create · current The flag to enable the trap receiver. If disabled, no traps are sent to this receiver's IP Address.
| |||||||||||||||||
| CagentSnmpTrapReceiverStatus | 1.3.6.1.4.1.14179.1.2.5.6.1.23 | RowStatus | RC | ||||||||||||||
column · RowStatus · read-create · current This object is used to create and delete instances of this table. The row, when created with the row status value of 'createAndGo' or 'createAndWait' is moved to the 'active' state automatically by the agent and remains in that state till the time the row is removed through the 'destroy' option. | |||||||||||||||||
| NagentSnmpTrapFlagsConfigGroup | 1.3.6.1.4.1.14179.1.2.5.7 | ||||||||||||||||
| SagentSnmpAuthenticationTrapFlag | 1.3.6.1.4.1.14179.1.2.5.7.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Authentication Flag - Enable/Disable authentication Flag.
| |||||||||||||||||
| SagentSnmpLinkUpDownTrapFlag | 1.3.6.1.4.1.14179.1.2.5.7.2 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Link Up/Down Flag - Enable/Disable Link Up/Link Down traps for the entire switch. When set to Enable, the Link Up/Down traps will be sent only if the Link Trap flag setting associated with the port (Port Configuration Menu) is set to Enable.
| |||||||||||||||||
| SagentSnmpMultipleUsersTrapFlag | 1.3.6.1.4.1.14179.1.2.5.7.3 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Multiple Users Flag - Enable/Disable Multiple User traps. When the value is set to Enable, a Multiple User Trap is sent whenever someone logs in to the terminal interface (EIA 232 or Telnet) and there is already an existing terminal interface session
| |||||||||||||||||
| SagentSnmpSpanningTreeTrapFlag | 1.3.6.1.4.1.14179.1.2.5.7.4 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Spanning Tree Flag - This flag enables the sending of new root traps and topology change notification traps.
| |||||||||||||||||
| SagentSnmpBroadcastStormTrapFlag | 1.3.6.1.4.1.14179.1.2.5.7.5 | INTEGER | RW | obsolete | |||||||||||||
scalar · INTEGER · read-write · obsolete Broadcast Storm Flag - This flag enables or disables the broadcast storm trap. You must also enable Broadcast Storm Recovery Mode (see the Switch Configuration Menu). When this value is set to Enable and Broadcast Storm Recovery mode is set to Enable, the Broadcast Storm Start/End traps are sent when the switch enters and leaves Broadcast Storm Recovery.
| |||||||||||||||||
| NagentSnmpV3ConfigGroup | 1.3.6.1.4.1.14179.1.2.6 | ||||||||||||||||
| SagentSnmpVersion3Status | 1.3.6.1.4.1.14179.1.2.6.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Snmp Version 3 Status
| |||||||||||||||||
| TagentSnmpV3UserConfigTable | 1.3.6.1.4.1.14179.1.2.6.2 | NA | |||||||||||||||
table · not-accessible · current User Config Table. Only creation and deletion of users is supported. All individual updates are not supported. | |||||||||||||||||
| RagentSnmpV3UserConfigEntry | 1.3.6.1.4.1.14179.1.2.6.2.1 | NA | |||||||||||||||
| CagentSnmpV3UserName | 1.3.6.1.4.1.14179.1.2.6.2.1.1 | OCTET STRING (SIZE (1..32)) | RC | ||||||||||||||
column · OCTET STRING (SIZE (1..32)) · read-create · current Agent User Name. | |||||||||||||||||
| CagentSnmpV3UserAccessMode | 1.3.6.1.4.1.14179.1.2.6.2.1.2 | INTEGER | RC | ||||||||||||||
column · INTEGER · read-create · current Agent User Access Mode
| |||||||||||||||||
| CagentSnmpV3UserAuthenticationType | 1.3.6.1.4.1.14179.1.2.6.2.1.3 | INTEGER | RC | ||||||||||||||
column · INTEGER · read-create · current SNMPv3 User Authentication none(1) - no authentication used hmacmd5(1) - Use HMAC-MD5 authentication hmacsha(1) - Use HMAC-SHA authentication
| |||||||||||||||||
| CagentSnmpV3UserEncryptionType | 1.3.6.1.4.1.14179.1.2.6.2.1.4 | INTEGER | RC | ||||||||||||||
column · INTEGER · read-create · current SNMPv3 User Encryption Must be set to none(1) if agentSnmpV3UserAuthenticationType is set to none(1). Setting this object will set the encryption password to an empty string. none(1) - no encryption used des(1) - DES encryption used
| |||||||||||||||||
| CagentSnmpV3UserAuthenticationPassword | 1.3.6.1.4.1.14179.1.2.6.2.1.5 | OCTET STRING (SIZE (0..32)) | RC | ||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-create · current SNMPv3 User Encryption Password | |||||||||||||||||
| CagentSnmpV3UserEncryptionPassword | 1.3.6.1.4.1.14179.1.2.6.2.1.6 | OCTET STRING (SIZE (0..32)) | RC | ||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-create · current SNMPv3 User Encryption Password | |||||||||||||||||
| CagentSnmpV3UserStatus | 1.3.6.1.4.1.14179.1.2.6.2.1.26 | RowStatus | RC | ||||||||||||||
column · RowStatus · read-create · current Agent User Status. active(1) - This user account is active. destroy(6) - Set to this value to remove this user account. | |||||||||||||||||
| NagentSpanningTreeConfigGroup | 1.3.6.1.4.1.14179.1.2.7 | ||||||||||||||||
| SagentSpanningTreeMode | 1.3.6.1.4.1.14179.1.2.7.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The switch's Spanning Tree Switch Status
| |||||||||||||||||
| NagentSwitchConfigGroup | 1.3.6.1.4.1.14179.1.2.8 | ||||||||||||||||
| SagentSwitchBroadcastControlMode | 1.3.6.1.4.1.14179.1.2.8.2 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The switch config broadcast allows you to enable or disable broadcast storm recovery mode. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on any Ethernet port exceeds 20 percent of the link speed, the switch blocks (discards) the broadcast traffic until the broadcast traffic returns to 10 percent or less.Upper limit for 10M link is 20% and lower limit is 10%. For 100M link Upper limit is 5% and lower limit is 2%
| |||||||||||||||||
| SagentSwitchDot3FlowControlMode | 1.3.6.1.4.1.14179.1.2.8.3 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Config switchconfig flowcontrol allows you to enable or disable 802.3x flow control for the switch. This value applies to only full-duplex mode ports.
| |||||||||||||||||
| TagentSwitchAddressAgingTimeoutTable | 1.3.6.1.4.1.14179.1.2.8.4 | NA | |||||||||||||||
table · not-accessible · current The switch's address aging timeout table | |||||||||||||||||
| RagentSwitchAddressAgingTimeoutEntry | 1.3.6.1.4.1.14179.1.2.8.4.1 | NA | |||||||||||||||
| CagentSwitchAddressAgingTimeout | 1.3.6.1.4.1.14179.1.2.8.4.1.10 | Integer32 (10..1000000) | RW | ||||||||||||||
column · Integer32 (10..1000000) · read-write · current The FDB entry's address aging timeout(in seconds) | |||||||||||||||||
| SagentSwitchLwappTransportMode | 1.3.6.1.4.1.14179.1.2.8.5 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The LWAPP transport mode decides if the switch is operating in the Layer2 or Layer3 mode. The switch needs to be rebooted for the mode change to take effect.
| |||||||||||||||||
| NagentTransferConfigGroup | 1.3.6.1.4.1.14179.1.2.9 | ||||||||||||||||
| NagentTransferUploadGroup | 1.3.6.1.4.1.14179.1.2.9.1 | ||||||||||||||||
| SagentTransferUploadMode | 1.3.6.1.4.1.14179.1.2.9.1.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Transfer upload mode configures the mode to use when uploading from the switch. The mode is either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid only when the file transfer is initiated by the serial EIA 232 port.
| |||||||||||||||||
| SagentTransferUploadServerIP | 1.3.6.1.4.1.14179.1.2.9.1.2 | IpAddress | RW | ||||||||||||||
scalar · IpAddress · read-write · current Transfer upload tftpserverip configures the IP address of the server where the file will be uploaded. It is valid only when the Transfer Mode is TFTP. The address is 4 integer bytes ranging from 0 to 255. | |||||||||||||||||
| SagentTransferUploadPath | 1.3.6.1.4.1.14179.1.2.9.1.3 | DisplayString (SIZE (0..63)) | RW | ||||||||||||||
scalar · DisplayString (SIZE (0..63)) · read-write · current Transfer upload tftppath configures the directory path where the file is to be uploaded to. The switch remembers the last file path used. | |||||||||||||||||
| SagentTransferUploadFilename | 1.3.6.1.4.1.14179.1.2.9.1.4 | DisplayString (SIZE (0..63)) | RW | ||||||||||||||
scalar · DisplayString (SIZE (0..63)) · read-write · current Transfer upload tftpfilename configures the file name for the file being uploaded from the switch. It can be up to 32 alphanumeric characters. The switch remembers the last file name used. File path can be appended to the file name if the string is less than 17 characters. Otherwise, the File Path field will need to be used and the File Name will be appended to the File Path as is. An example would be File Path set to c:\tftp\code\ and File Name set to e1r1v1.opr. Note: File Name, File Path, and TFTP Server IP Address are applicable only if the Transfer Mode is TFTP. | |||||||||||||||||
| SagentTransferUploadDataType | 1.3.6.1.4.1.14179.1.2.9.1.5 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Transfer upload datatype configures the type of file to upload from the switch. The types for upload are: - Configuration File - Error log - System trace - Trap log - Crash File
| |||||||||||||||||
| SagentTransferUploadStart | 1.3.6.1.4.1.14179.1.2.9.1.6 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Transfer upload start will start an upload transfer. The agentTransferUploadMode object must not be set to xmodem(2), ymodem(3), or zmodem(4) to initiate a transfer via SNMP.
| |||||||||||||||||
| SagentTransferUploadStatus | 1.3.6.1.4.1.14179.1.2.9.1.7 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current Indicates the current status of an upload transfer.
| |||||||||||||||||
| NagentTransferDownloadGroup | 1.3.6.1.4.1.14179.1.2.9.2 | ||||||||||||||||
| SagentTransferDownloadMode | 1.3.6.1.4.1.14179.1.2.9.2.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Transfer download mode configures the mode to use when downloading to the switch. The mode is either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid only when the file transfer is initiated by the serial EIA 232 port.
| |||||||||||||||||
| SagentTransferDownloadServerIP | 1.3.6.1.4.1.14179.1.2.9.2.2 | IpAddress | RW | ||||||||||||||
scalar · IpAddress · read-write · current Transfer download tftpserverip configures the IP address of the server where the file is located. It is valid only when the Transfer Mode is TFTP. The address is 4 integer bytes ranging from 0 to 255. | |||||||||||||||||
| SagentTransferDownloadPath | 1.3.6.1.4.1.14179.1.2.9.2.3 | DisplayString (SIZE (0..63)) | RW | ||||||||||||||
scalar · DisplayString (SIZE (0..63)) · read-write · current Transfer download tftppath configures the directory path where the file is located. The switch remembers the last file path used. | |||||||||||||||||
| SagentTransferDownloadFilename | 1.3.6.1.4.1.14179.1.2.9.2.4 | DisplayString (SIZE (0..63)) | RW | ||||||||||||||
scalar · DisplayString (SIZE (0..63)) · read-write · current Transfer download tftpfilename configures the file name for the file being downloaded to the switch. It can be up to 32 alphanumeric characters. The switch remembers the last file name used. File path can be appended to the file name if the string is less than 33 characters. Otherwise, the File Path field will need to be used and the File Name will be appended to the File Path as is. An example would be File Path set to c:\tftp\code\ and File Name set to e1r1v1.opr. Note: File Name, File Path, and TFTP Server IP Address are applicable only if the Transfer Mode is TFTP. | |||||||||||||||||
| SagentTransferDownloadDataType | 1.3.6.1.4.1.14179.1.2.9.2.5 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Transfer download datatype configures the type of file to downloaded to the switch. The types for download are: - Code - Configuration - Certificates - Signatures - customWebauth- custom webauth tar ball
| |||||||||||||||||
| SagentTransferDownloadStart | 1.3.6.1.4.1.14179.1.2.9.2.6 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Transfer download start will start an download transfer. The agentTransferDownloadMode object must not be set to xmodem(2), ymodem(3), or zmodem(4) to initiate a transfer via SNMP.
| |||||||||||||||||
| SagentTransferDownloadStatus | 1.3.6.1.4.1.14179.1.2.9.2.7 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current Indicates the current status of an download transfer.
| |||||||||||||||||
| SagentTransferDownloadTftpMaxRetries | 1.3.6.1.4.1.14179.1.2.9.2.8 | Unsigned32 (1..254) | RW | ||||||||||||||
scalar · Unsigned32 (1..254) · read-write · current Maximum number of retries to be allowed for a TFTP message packet. | |||||||||||||||||
| SagentTransferDownloadTftpTimeout | 1.3.6.1.4.1.14179.1.2.9.2.9 | Unsigned32 (1..254) | RW | ||||||||||||||
scalar · Unsigned32 (1..254) · read-write · current Timeout in seconds for a TFTP message packet. | |||||||||||||||||
| SagentTransferConfigurationFileEncryption | 1.3.6.1.4.1.14179.1.2.9.3 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The configuration file can be encrypted before tftp upload from the switch and then decrypted before downloading to the switch when this option is enabled.
| |||||||||||||||||
| SagentTransferConfigurationFileEncryptionKey | 1.3.6.1.4.1.14179.1.2.9.4 | DisplayString (SIZE (0..16)) | RW | ||||||||||||||
scalar · DisplayString (SIZE (0..16)) · read-write · current This is the key to be used when encrypting the configuration file while upload from the switch or while decrypting the file after download to the switch. | |||||||||||||||||
| TagentDot3adAggPortTable | 1.3.6.1.4.1.14179.1.2.11 | NA | obsolete | ||||||||||||||
table · not-accessible · obsolete This table provides 802.3ad link aggregation information for each physical port that is not available through the standard MIB. | |||||||||||||||||
| RagentDot3adAggPortEntry | 1.3.6.1.4.1.14179.1.2.11.1 | NA | obsolete | ||||||||||||||
row · not-accessible · obsolete Information about a table entry. The agentDot3adAggPort identifies the external interface number of the port.
| |||||||||||||||||
| CagentDot3adAggPort | 1.3.6.1.4.1.14179.1.2.11.1.1 | Integer32 | RO | obsolete | |||||||||||||
column · Integer32 · read-only · obsolete ifIndex of this physical port | |||||||||||||||||
| CagentDot3adAggPortLACPMode | 1.3.6.1.4.1.14179.1.2.11.1.21 | INTEGER | RW | obsolete | |||||||||||||
column · INTEGER · read-write · obsolete Enable/disable 802.3ad LACP on this port
| |||||||||||||||||
| TagentPortConfigTable | 1.3.6.1.4.1.14179.1.2.12 | NA | |||||||||||||||
table · not-accessible · current A table of the switch's physical port config entries | |||||||||||||||||
| RagentPortConfigEntry | 1.3.6.1.4.1.14179.1.2.12.1 | NA | |||||||||||||||
| CagentPortDot1dBasePort | 1.3.6.1.4.1.14179.1.2.12.1.1 | Integer32 (1..65535) | RO | ||||||||||||||
column · Integer32 (1..65535) · read-only · current The port number of this port. | |||||||||||||||||
| CagentPortIfIndex | 1.3.6.1.4.1.14179.1.2.12.1.2 | Integer32 | RO | ||||||||||||||
column · Integer32 · read-only · current The switch's Port IfIndex | |||||||||||||||||
| CagentPortIanaType | 1.3.6.1.4.1.14179.1.2.12.1.3 | IANAifType | RO | ||||||||||||||
column · IANAifType · read-only · current The switch's Port Type | |||||||||||||||||
| CagentPortSTPMode | 1.3.6.1.4.1.14179.1.2.12.1.4 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The switch's Port Spanning Tree Protocol Mode STP mode values are: dot1d (the default) fast, indicates you want to use the fast spanning tree mode off, indicates the STP mode is turned off for a particular port
| |||||||||||||||||
| CagentPortSTPState | 1.3.6.1.4.1.14179.1.2.12.1.5 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The switch's Port Spanning Tree Protocol State
| |||||||||||||||||
| CagentPortAdminMode | 1.3.6.1.4.1.14179.1.2.12.1.6 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The switch's Port Admin Mode
| |||||||||||||||||
| CagentPortPhysicalMode | 1.3.6.1.4.1.14179.1.2.12.1.7 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The switch's Port Speed Mode. This is the configured physical mode.This object is read-only for gigabit ports
| |||||||||||||||||
| CagentPortPhysicalStatus | 1.3.6.1.4.1.14179.1.2.12.1.8 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The switch's Port Physical Speed Status.This is the current actual speed.
| |||||||||||||||||
| CagentPortLinkTrapMode | 1.3.6.1.4.1.14179.1.2.12.1.9 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current If enabled, link up and link down traps will be sent for this port.
| |||||||||||||||||
| CagentPortClearStats | 1.3.6.1.4.1.14179.1.2.12.1.10 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Clear stats for this port only
| |||||||||||||||||
| CagentPortDefaultType | 1.3.6.1.4.1.14179.1.2.12.1.11 | OBJECT IDENTIFIER | RW | ||||||||||||||
column · OBJECT IDENTIFIER · read-write · current This object identifies the default administrative
port type, to be used in conjunction with the
operational port type denoted by agentPortType.
The set of possible values for this object is
the same as the set defined for the agentPortType
object.
This object represents the administratively-
configured
type of the MAU. If auto-negotiation is not enabled
or is not implemented for this MAU, the value of
this object determines the operational type of the
MAU. In this case, a set to this object will force
the MAU into the specified operating mode.
If auto-negotiation is implemented and enabled for
this MAU, the operational type of the MAU is
determined by auto-negotiation, and the value of
this object denotes the type to which the MAU will
automatically revert if/when auto-negotiation is
later disabled.
The valid values for this object are:
dot3MauType10BaseTHD
dot3MauType10BaseTFD
dot3MauType100BaseTXHD
dot3MauType100BaseTXFD
dot3MauType100BaseFXFD
dot3MauType1000BaseSXFD | |||||||||||||||||
| CagentPortType | 1.3.6.1.4.1.14179.1.2.12.1.12 | OBJECT IDENTIFIER | RO | ||||||||||||||
column · OBJECT IDENTIFIER · read-only · current This object identifies the port type. An initial set of MAU types are defined in RFC 2668. The assignment of OBJECT IDENTIFIERs to new types of MAUs is managed by the IANA. If the MAU type is unknown, the object identifier unknownMauType OBJECT IDENTIFIER ::= { 0 0 } is returned. Note that unknownMauType is a syntactically valid object identifier, and any conformant implementation of ASN.1 and the BER must be able to generate and recognize this value. This object represents the operational type of the MAU, as determined by either (1) the result of the auto-negotiation function or (2) if auto-negotiation is not enabled or is not implemented for this MAU, by the value of the object qbEnetDefaultType, or (3) for the GigE card a value determined by the GBIC connected to the card. In case (2), a set to the object qbEnetPortDefaultType will force the MAU into the new operating mode. The valid values for this object are: dot3MauType10BaseTHD dot3MauType10BaseTFD dot3MauType100BaseTXHD dot3MauType100BaseTXFD dot3MauType100BaseFXFD dot3MauType1000BaseSXFD | |||||||||||||||||
| CagentPortAutoNegAdminStatus | 1.3.6.1.4.1.14179.1.2.12.1.13 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current This object identifies the administration status of auto negotiation for this port.
| |||||||||||||||||
| CagentPortDot3FlowControlMode | 1.3.6.1.4.1.14179.1.2.12.1.14 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Config flowcontrol allows you to enable or disable 802.3x flow control for this port. This value applies to only full-duplex mode ports.
| |||||||||||||||||
| CagentPortPowerMode | 1.3.6.1.4.1.14179.1.2.12.1.15 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Enable/Disable the port's Power over ethernet. This doesn't apply to appliances that have no POE controller.
| |||||||||||||||||
| CagentPortGvrpStatus | 1.3.6.1.4.1.14179.1.2.12.1.16 | INTEGER | RW | obsolete | |||||||||||||
column · INTEGER · read-write · obsolete The state of GVRP operation on this port. The value enabled(1) indicates that GVRP is enabled on this port, as long as dot1qGvrpStatus is also enabled for this device. When disabled(2) but dot1qGvrpStatus is still enabled for the device, GVRP is disabled on this port: any GVRP packets received will be silently discarded and no GVRP registrations will be propagated from other ports. This object affects all GVRP Applicant and Registrar state machines on this port. A transition from disabled(2) to enabled(1) will cause a reset of all GVRP state machines on this port.(Attribute no longer supported)
| |||||||||||||||||
| CagentPortGarpJoinTime | 1.3.6.1.4.1.14179.1.2.12.1.17 | Unsigned32 | RW | obsolete | |||||||||||||
column · Unsigned32 · read-write · obsolete The GARP Join time, in centiseconds.(Attribute no longer supported) | |||||||||||||||||
| CagentPortGarpLeaveTime | 1.3.6.1.4.1.14179.1.2.12.1.18 | Unsigned32 | RW | obsolete | |||||||||||||
column · Unsigned32 · read-write · obsolete The GARP Leave time, in centiseconds.(Attribute no longer supported) | |||||||||||||||||
| CagentPortGarpLeaveAllTime | 1.3.6.1.4.1.14179.1.2.12.1.19 | Unsigned32 | RW | obsolete | |||||||||||||
column · Unsigned32 · read-write · obsolete The GARP LeaveAll time, in centiseconds.(Attribute no longer supported) | |||||||||||||||||
| CagentPortMirrorMode | 1.3.6.1.4.1.14179.1.2.12.1.20 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The switch's Port Mirror Mode. If enabled, then this is the port that the packets are mirrored to.
| |||||||||||||||||
| CagentPortMulticastApplianceMode | 1.3.6.1.4.1.14179.1.2.12.1.21 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The Port Multicast Appliance Mode. If enabled, then this port allows multicast streams through it. At a time, a maximum of four ports including the gigabit ethernet port can have this mode enabled on them. This is to limit the number of multicast streams allowed through the switch at a given time.
| |||||||||||||||||
| CagentPortOperationalStatus | 1.3.6.1.4.1.14179.1.2.12.1.40 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The current operational state of the port.
| |||||||||||||||||
| TagentInterfaceConfigTable | 1.3.6.1.4.1.14179.1.2.13 | NA | |||||||||||||||
table · not-accessible · current A table of the switch's Interface Config entries Typically, it will contain entries for Service Port Interface, DS Port Interface and Virtual Gateway Interface apart from other entries. | |||||||||||||||||
| RagentInterfaceConfigEntry | 1.3.6.1.4.1.14179.1.2.13.1 | NA | |||||||||||||||
| CagentInterfaceName | 1.3.6.1.4.1.14179.1.2.13.1.1 | OCTET STRING (SIZE (1..32)) | RC | ||||||||||||||
column · OCTET STRING (SIZE (1..32)) · read-create · current Interace Name. This values is 'management' for DS port, 'service-port' for service port and 'virtual' for virtual gateway. For other interfaces, the name can be anything. These interfaces are already created by default. | |||||||||||||||||
| CagentInterfaceVlanId | 1.3.6.1.4.1.14179.1.2.13.1.2 | Integer32 (0..4094) | RC | ||||||||||||||
column · Integer32 (0..4094) · read-create · current Vlan ID configured for the Interface. | |||||||||||||||||
| CagentInterfaceType | 1.3.6.1.4.1.14179.1.2.13.1.3 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The interface's type. The static type is set for the interfaces that are created by default on the switch and these cannot be deleted. Any other interface that is created is of type dynamic which can be deleted.
| |||||||||||||||||
| CagentInterfaceMacAddress | 1.3.6.1.4.1.14179.1.2.13.1.4 | MacAddress | RO | ||||||||||||||
column · MacAddress · read-only · current Interface MAC Address. This is only applicable in case of management and service-port interfaces. | |||||||||||||||||
| CagentInterfaceIPAddress | 1.3.6.1.4.1.14179.1.2.13.1.5 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current IP Address of the interface. | |||||||||||||||||
| CagentInterfaceIPNetmask | 1.3.6.1.4.1.14179.1.2.13.1.6 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current IP Netmask of the interface. This is 0 for the virtual interface. | |||||||||||||||||
| CagentInterfaceIPGateway | 1.3.6.1.4.1.14179.1.2.13.1.7 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current IP Gateway of the interface. This is 0 for virtual and service-port interface. | |||||||||||||||||
| CagentInterfacePortNo | 1.3.6.1.4.1.14179.1.2.13.1.8 | Integer32 (0..25) | RC | ||||||||||||||
column · Integer32 (0..25) · read-create · current A value 0 means the port is not set. The valid value can be any one of the physical ports on the switch. This is the primary port configured on the interface. | |||||||||||||||||
| CagentInterfacePrimaryDhcpAddress | 1.3.6.1.4.1.14179.1.2.13.1.9 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current Primary DHCP Server IP Address for the interface This applies to the management interface and other dynamic interfaces. | |||||||||||||||||
| CagentInterfaceSecondaryDhcpAddress | 1.3.6.1.4.1.14179.1.2.13.1.10 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current Secondary DHCP Server IP Address for the interface. This applies to the management interface and other dynamic interfaces. | |||||||||||||||||
| CagentInterfaceDhcpProtocol | 1.3.6.1.4.1.14179.1.2.13.1.11 | INTEGER | RC | ||||||||||||||
column · INTEGER · read-create · current The interface's DHCP protocol. This applies only to the service port interface.
| |||||||||||||||||
| CagentInterfaceDnsHostName | 1.3.6.1.4.1.14179.1.2.13.1.12 | DisplayString (SIZE (0..80)) | RC | ||||||||||||||
column · DisplayString (SIZE (0..80)) · read-create · current The DNS host name for the Virtual Interface. This attribute is not valid for other interfaces. | |||||||||||||||||
| CagentInterfaceAclName | 1.3.6.1.4.1.14179.1.2.13.1.13 | DisplayString (SIZE (0..32)) | RC | ||||||||||||||
column · DisplayString (SIZE (0..32)) · read-create · current Name of the Access Control List applied to the interface. This attribute is applicable only to the management interface and other dynamic interfaces. If it is required to remove the ACL name for an interface, it should be set to an empty string. | |||||||||||||||||
| CagentInterfaceAPManagementFeature | 1.3.6.1.4.1.14179.1.2.13.1.14 | INTEGER | RC | ||||||||||||||
column · INTEGER · read-create · current When enabled, the dynamic interface can be used for AP management. SNMP support for AP management through dynamic interfaces has been introduced since '3.0.21.0' release. Only applicable to dynamic interfaces in 4200 series. In static interfaces, 'disable' value 0 is returned. In 4000/3500 series of switches, 'disable' value 0 is returned.
| |||||||||||||||||
| CagentInterfaceActivePortNo | 1.3.6.1.4.1.14179.1.2.13.1.15 | Integer32 (0..25) | RO | ||||||||||||||
column · Integer32 (0..25) · read-only · current This is the currently active port for this interface. | |||||||||||||||||
| CagentInterfaceBackupPortNo | 1.3.6.1.4.1.14179.1.2.13.1.16 | Integer32 (0..4) | RC | ||||||||||||||
column · Integer32 (0..4) · read-create · current This values is valid only for the 4200 series of switches. The backup port is the port this interface is moved to once the primary port fails. A value 0 means the port is not set. The valid value can be any one of the physical ports on the 4200 switch. | |||||||||||||||||
| CagentInterfaceVlanQuarantine | 1.3.6.1.4.1.14179.1.2.13.1.17 | TruthValue | RC | ||||||||||||||
column · TruthValue · read-create · current This object is used to configure the health of the interface identified by agentInterfaceName. A value of 'true' is used to indicate that this particular interface is unhealthy. In this case, the data packets of the clients, that are assigned the VLAN Id corresponding to this interface, must be tunneled to the Controller by the REAP AP. A value of 'false' indicates that the VLAN configured against the interface is healthy and that the REAP AP can switch the clients of this VLAN locally rather than tunneling them to the Controller. | |||||||||||||||||
| CagentInterfaceRowStatus | 1.3.6.1.4.1.14179.1.2.13.1.31 | RowStatus | RC | ||||||||||||||
column · RowStatus · read-create · current The interface entry Row status. | |||||||||||||||||
| NagentNtpConfigGroup | 1.3.6.1.4.1.14179.1.2.14 | ||||||||||||||||
| SagentNtpPollingInterval | 1.3.6.1.4.1.14179.1.2.14.1 | Integer32 (3600..604800) | RW | ||||||||||||||
scalar · Integer32 (3600..604800) · read-write · current Network Time Protocol polling interval. Min value is one hour and maximum is a week. | |||||||||||||||||
| TagentNtpServerTable | 1.3.6.1.4.1.14179.1.2.14.2 | NA | |||||||||||||||
table · not-accessible · current A summary table for switch's lag config entries | |||||||||||||||||
| RagentNtpServerEntry | 1.3.6.1.4.1.14179.1.2.14.2.1 | NA | |||||||||||||||
row · not-accessible · current Switch's NTP Server entry. Upto 4 entries may be added.
| |||||||||||||||||
| CagentNtpServerIndex | 1.3.6.1.4.1.14179.1.2.14.2.1.1 | Integer32 (1..3) | RC | ||||||||||||||
column · Integer32 (1..3) · read-create · current NTP Server priority index. | |||||||||||||||||
| CagentNtpServerAddress | 1.3.6.1.4.1.14179.1.2.14.2.1.2 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current IP Address of the NTP Server | |||||||||||||||||
| CagentNtpServerRowStatus | 1.3.6.1.4.1.14179.1.2.14.2.1.20 | RowStatus | RC | ||||||||||||||
column · RowStatus · read-create · current NTP server entry row status. | |||||||||||||||||
| NagentDhcpConfigGroup | 1.3.6.1.4.1.14179.1.2.15 | ||||||||||||||||
| TagentDhcpScopeTable | 1.3.6.1.4.1.14179.1.2.15.1 | NA | |||||||||||||||
table · not-accessible · current A table listing the Scopes defined on the switch's DHCP Server. | |||||||||||||||||
| RagentDhcpScopeEntry | 1.3.6.1.4.1.14179.1.2.15.1.1 | NA | |||||||||||||||
| CagentDhcpScopeIndex | 1.3.6.1.4.1.14179.1.2.15.1.1.1 | Unsigned32 (0..15) | RC | ||||||||||||||
column · Unsigned32 (0..15) · read-create · current DHCP Scope Identifier Index. | |||||||||||||||||
| CagentDhcpScopeName | 1.3.6.1.4.1.14179.1.2.15.1.1.2 | DisplayString (SIZE (1..79)) | RC | ||||||||||||||
column · DisplayString (SIZE (1..79)) · read-create · current DHCP Scope Name. | |||||||||||||||||
| CagentDhcpScopeLeaseTime | 1.3.6.1.4.1.14179.1.2.15.1.1.3 | Integer32 (120..8640000) | RC | ||||||||||||||
column · Integer32 (120..8640000) · read-create · current DHCP Scope Lease time in seconds. | |||||||||||||||||
| CagentDhcpScopeNetwork | 1.3.6.1.4.1.14179.1.2.15.1.1.4 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current IP Address of the DHCP Scope Network. This is the address which is used to determine the DHCP scope a remote Switch is attaching to. | |||||||||||||||||
| CagentDhcpScopeNetmask | 1.3.6.1.4.1.14179.1.2.15.1.1.5 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current The DHCP Scope Netmask. This the subnet mask for the address pool. | |||||||||||||||||
| CagentDhcpScopePoolStartAddress | 1.3.6.1.4.1.14179.1.2.15.1.1.6 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current The DHCP Scope address pool start IP address. | |||||||||||||||||
| CagentDhcpScopePoolEndAddress | 1.3.6.1.4.1.14179.1.2.15.1.1.7 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current The DHCP Scope address pool end IP address. | |||||||||||||||||
| CagentDhcpScopeDefaultRouterAddress1 | 1.3.6.1.4.1.14179.1.2.15.1.1.8 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current IP Address of the DHCP Scope's default Router 1. | |||||||||||||||||
| CagentDhcpScopeDefaultRouterAddress2 | 1.3.6.1.4.1.14179.1.2.15.1.1.9 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current IP Address of the DHCP Scope's default Router 2. | |||||||||||||||||
| CagentDhcpScopeDefaultRouterAddress3 | 1.3.6.1.4.1.14179.1.2.15.1.1.10 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current IP Address of the DHCP Scope's default Router 3. | |||||||||||||||||
| CagentDhcpScopeDnsDomainName | 1.3.6.1.4.1.14179.1.2.15.1.1.11 | DisplayString (SIZE (0..79)) | RC | ||||||||||||||
column · DisplayString (SIZE (0..79)) · read-create · current DNS Domain name for the DHCP Scope. | |||||||||||||||||
| CagentDhcpScopeDnsServerAddress1 | 1.3.6.1.4.1.14179.1.2.15.1.1.12 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current IP Address of the DHCP Scope's DNS Server 1. | |||||||||||||||||
| CagentDhcpScopeDnsServerAddress2 | 1.3.6.1.4.1.14179.1.2.15.1.1.13 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current IP Address of the DHCP Scope's DNS Server 2. | |||||||||||||||||
| CagentDhcpScopeDnsServerAddress3 | 1.3.6.1.4.1.14179.1.2.15.1.1.14 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current IP Address of the DHCP Scope's DNS Server 3. | |||||||||||||||||
| CagentDhcpScopeNetbiosNameServerAddress1 | 1.3.6.1.4.1.14179.1.2.15.1.1.15 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current IP Address of DHCP Scope's Netbios Name Server 1. | |||||||||||||||||
| CagentDhcpScopeNetbiosNameServerAddress2 | 1.3.6.1.4.1.14179.1.2.15.1.1.16 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current IP Address of DHCP Scope's Netbios Name Server 2. | |||||||||||||||||
| CagentDhcpScopeNetbiosNameServerAddress3 | 1.3.6.1.4.1.14179.1.2.15.1.1.17 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current IP Address of DHCP Scope's Netbios Name Server 3. | |||||||||||||||||
| CagentDhcpScopeState | 1.3.6.1.4.1.14179.1.2.15.1.1.18 | INTEGER | RC | ||||||||||||||
column · INTEGER · read-create · current DHCP Scope's State.
| |||||||||||||||||
| CagentDhcpScopeRowStatus | 1.3.6.1.4.1.14179.1.2.15.1.1.30 | RowStatus | RC | ||||||||||||||
column · RowStatus · read-create · current Dhcp Scope entry row status. | |||||||||||||||||
| NagentSystemGroup | 1.3.6.1.4.1.14179.1.3 | ||||||||||||||||
| SagentSaveConfig | 1.3.6.1.4.1.14179.1.3.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current save config to NVRAM
| |||||||||||||||||
| SagentClearConfig | 1.3.6.1.4.1.14179.1.3.2 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current clear config to factory defaults
| |||||||||||||||||
| SagentClearLags | 1.3.6.1.4.1.14179.1.3.3 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current clear lag configuration
| |||||||||||||||||
| SagentClearLoginSessions | 1.3.6.1.4.1.14179.1.3.4 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current close all telnet sessions
| |||||||||||||||||
| SagentClearPortStats | 1.3.6.1.4.1.14179.1.3.6 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current clear all port statistics
| |||||||||||||||||
| SagentClearSwitchStats | 1.3.6.1.4.1.14179.1.3.7 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current clear all switch statistics
| |||||||||||||||||
| SagentClearTrapLog | 1.3.6.1.4.1.14179.1.3.8 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current clear trap log
| |||||||||||||||||
| SagentResetSystem | 1.3.6.1.4.1.14179.1.3.10 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current reset the switch
| |||||||||||||||||
| Nstats | 1.3.6.1.4.1.14179.1.4 | ||||||||||||||||
| TportStatsTable | 1.3.6.1.4.1.14179.1.4.1 | NA | |||||||||||||||
table · not-accessible · current A list of additional thernet statistics entries. | |||||||||||||||||
| RportStatsEntry | 1.3.6.1.4.1.14179.1.4.1.1 | NA | |||||||||||||||
row · not-accessible · current A collection of statistics kept for a particular Ethernet interface.
| |||||||||||||||||
| CportStatsIndex | 1.3.6.1.4.1.14179.1.4.1.1.1 | Integer32 (1..65535) | RO | ||||||||||||||
column · Integer32 (1..65535) · read-only · current The value of this object uniquely identifies this portStatsEntry. | |||||||||||||||||
| CportStatsPktsTx64Octets | 1.3.6.1.4.1.14179.1.4.1.1.2 | Counter32 | RO | ||||||||||||||
column · Counter32 · read-only · current The total number of packets (including bad packets) transmitted that were 64 octets in length (excluding framing bits but including FCS octets).
| |||||||||||||||||
| CportStatsPktsTx65to127Octets | 1.3.6.1.4.1.14179.1.4.1.1.3 | Counter32 | RO | ||||||||||||||
column · Counter32 · read-only · current The total number of packets (including bad packets) transmitted that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
| |||||||||||||||||
| CportStatsPktsTx128to255Octets | 1.3.6.1.4.1.14179.1.4.1.1.4 | Counter32 | RO | ||||||||||||||
column · Counter32 · read-only · current The total number of packets (including bad packets) transmitted that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
| |||||||||||||||||
| CportStatsPktsTx256to511Octets | 1.3.6.1.4.1.14179.1.4.1.1.5 | Counter32 | RO | ||||||||||||||
column · Counter32 · read-only · current The total number of packets (including bad packets) transmitted that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
| |||||||||||||||||
| CportStatsPktsTx512to1023Octets | 1.3.6.1.4.1.14179.1.4.1.1.6 | Counter32 | RO | ||||||||||||||
column · Counter32 · read-only · current The total number of packets (including bad packets) transmitted that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
| |||||||||||||||||
| CportStatsPktsTx1024to1518Octets | 1.3.6.1.4.1.14179.1.4.1.1.7 | Counter32 | RO | ||||||||||||||
column · Counter32 · read-only · current The total number of packets (including bad packets) transmitted that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
| |||||||||||||||||
| CportStatsPktsRx1519to1530Octets | 1.3.6.1.4.1.14179.1.4.1.1.8 | Counter32 | RO | ||||||||||||||
column · Counter32 · read-only · current The total number of packets (including bad packets) received that were between 1519 and 1530 octets in length inclusive (excluding framing bits but including FCS octets).
| |||||||||||||||||
| CportStatsPktsTx1519to1530Octets | 1.3.6.1.4.1.14179.1.4.1.1.9 | Counter32 | RO | ||||||||||||||
column · Counter32 · read-only · current The total number of packets (including bad packets) transmitted that were between 1519 and 1530 octets in length inclusive (excluding framing bits but including FCS octets).
| |||||||||||||||||
| CportStatsPktsTxOversizeOctets | 1.3.6.1.4.1.14179.1.4.1.1.30 | Counter32 | RO | ||||||||||||||
column · Counter32 · read-only · current The total number of packets (including bad packets) transmitted that were more than 1530 octets in length. (excluding framing bits but including FCS octets).
| |||||||||||||||||
| NswitchingTraps | 1.3.6.1.4.1.14179.1.50 | ||||||||||||||||
| !multipleUsersTrap | 1.3.6.1.4.1.14179.1.50.1 | ||||||||||||||||
notification · current Multiple Users Log Trap. | |||||||||||||||||
| !broadcastStormStartTrap | 1.3.6.1.4.1.14179.1.50.2 | ||||||||||||||||
notification · current Broadcast Storm Start Log Trap. | |||||||||||||||||
| !broadcastStormEndTrap | 1.3.6.1.4.1.14179.1.50.3 | ||||||||||||||||
notification · current Broadcast Storm End Log Trap. | |||||||||||||||||
| !linkFailureTrap | 1.3.6.1.4.1.14179.1.50.4 | ||||||||||||||||
notification · current trapMgrLinkFailureLogTrap. | |||||||||||||||||
| !vlanRequestFailureTrap | 1.3.6.1.4.1.14179.1.50.5 | ||||||||||||||||
| !vlanDeleteLastTrap | 1.3.6.1.4.1.14179.1.50.6 | ||||||||||||||||
| !vlanDefaultCfgFailureTrap | 1.3.6.1.4.1.14179.1.50.7 | ||||||||||||||||
| !vlanRestoreFailureTrap | 1.3.6.1.4.1.14179.1.50.8 | ||||||||||||||||
| !fanFailureTrap | 1.3.6.1.4.1.14179.1.50.9 | ||||||||||||||||
notification · current Fan Failure Log Trap. | |||||||||||||||||
| !stpInstanceNewRootTrap | 1.3.6.1.4.1.14179.1.50.10 | ||||||||||||||||
| !stpInstanceTopologyChangeTrap | 1.3.6.1.4.1.14179.1.50.11 | ||||||||||||||||
| !powerSupplyStatusChangeTrap | 1.3.6.1.4.1.14179.1.50.12 | ||||||||||||||||
notification · current Power Supply Status Change Trap | |||||||||||||||||
| NbsnSwitchingGroups | 1.3.6.1.4.1.14179.1.51 | ||||||||||||||||
| GbsnSwitchingAgentInfoGroup | 1.3.6.1.4.1.14179.1.51.1 | ||||||||||||||||
group · current This collection of objects provide switching information.
| |||||||||||||||||
| GbsnSwitchingAgentConfigGroup | 1.3.6.1.4.1.14179.1.51.2 | ||||||||||||||||
group · current This collection of objects provide switching configuration information.
| |||||||||||||||||
| GbsnSwitchingAgentSystemGroup | 1.3.6.1.4.1.14179.1.51.3 | ||||||||||||||||
group · current This collection of objects provide switching system information and config. | |||||||||||||||||
| GbsnSwitchingAgentStatsGroup | 1.3.6.1.4.1.14179.1.51.4 | ||||||||||||||||
group · current This collection of objects provide switching statistics.
| |||||||||||||||||
| GbsnSwitchingObsGroup | 1.3.6.1.4.1.14179.1.51.5 | obsolete | |||||||||||||||
group · obsolete This collection of objects are obsoleted in bsnSwitching module.
| |||||||||||||||||
| GbsnSwitchingTrap | 1.3.6.1.4.1.14179.1.51.6 | ||||||||||||||||
group · current This collection of objects provides switching related notification. | |||||||||||||||||
| NbsnSwitchingCompliances | 1.3.6.1.4.1.14179.1.52 | ||||||||||||||||
| MbsnSwitchingCompliance | 1.3.6.1.4.1.14179.1.52.1 | ||||||||||||||||
compliance · current The compliance statement for the SNMP entities that implement the bsnSwitching module | |||||||||||||||||
Traps / Notifications
- broadcastStormEndTrap
1.3.6.1.4.1.14179.1.50.3 - broadcastStormStartTrap
1.3.6.1.4.1.14179.1.50.2 - fanFailureTrap
1.3.6.1.4.1.14179.1.50.9 - linkFailureTrap
1.3.6.1.4.1.14179.1.50.4 - multipleUsersTrap
1.3.6.1.4.1.14179.1.50.1 - powerSupplyStatusChangeTrap
1.3.6.1.4.1.14179.1.50.12 - stpInstanceNewRootTrap
1.3.6.1.4.1.14179.1.50.10 - stpInstanceTopologyChangeTrap
1.3.6.1.4.1.14179.1.50.11 - vlanDefaultCfgFailureTrap
1.3.6.1.4.1.14179.1.50.7 - vlanDeleteLastTrap
1.3.6.1.4.1.14179.1.50.6 - vlanRequestFailureTrap
1.3.6.1.4.1.14179.1.50.5 - vlanRestoreFailureTrap
1.3.6.1.4.1.14179.1.50.8