WWP-LEOS-SYSTEM-CONFIG-MIB
World Wide PacketsThe MIB module for the WWP System Config information.
snmptranslate -m WWP-LEOS-SYSTEM-CONFIG-MIB -Tpsnmpwalk -v2c -c <community> -m WWP-LEOS-SYSTEM-CONFIG-MIB <host> 1.3.6.1.4.1.6141.2.60.12Imports
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| WWP-SMI | wwpModulesLeos |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IwwpLeosSystemConfigMIB | 1.3.6.1.4.1.6141.2.60.12 | ||||||||||||
identity The MIB module for the WWP System Config information. | |||||||||||||
| NwwpLeosSystemConfigMIBObjects | 1.3.6.1.4.1.6141.2.60.12.1 | ||||||||||||
| NwwpLeosSystemConfigAttr | 1.3.6.1.4.1.6141.2.60.12.1.1 | ||||||||||||
| SwwpLeosSystemConfigDefaultGateway | 1.3.6.1.4.1.6141.2.60.12.1.1.1 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Default gateway IP address. | |||||||||||||
| SwwpLeosSystemConfigBootCmdFile | 1.3.6.1.4.1.6141.2.60.12.1.1.2 | FileName | RW | ||||||||||
scalar · FileName · read-write · current Name of the last command file successfully executed by the device. | |||||||||||||
| SwwpLeosSystemConfigBootCfgFile | 1.3.6.1.4.1.6141.2.60.12.1.1.3 | FileName | RW | ||||||||||
scalar · FileName · read-write · current This object specifies the bootup configuration file for the system. Setting is object is similar to setting default load config file name. When the device reboots, it attempts to load the file specified by wwpLeosSystemConfigBootCfgFile. | |||||||||||||
| SwwpLeosSystemClockDateTime | 1.3.6.1.4.1.6141.2.60.12.1.1.4 | DateAndTime | RW | ||||||||||
scalar · DateAndTime · read-write · current The current system date and time of box. There are no provisions for local time or daylight savings. All times use the 24 hr clock and are UTC. Because device time is UTC, only first 7 bytes of DateAndTime data are returned, as per RFC1903. | |||||||||||||
| SwwpLeosSystemConfigSavePermFile | 1.3.6.1.4.1.6141.2.60.12.1.1.5 | FileName | RW | ||||||||||
scalar · FileName · read-write · current This object sets the save file name to the value of wwpLeosSystemConfigSavePermFile. Whenever wwpLeosSystemConfigControl is set to 'save' and wwpLeosSystemConfigSaveFile is not set, the device uses wwpLeosSystemConfigSavePermFile as the file name to store config. | |||||||||||||
| SwwpLeosSystemConfigLastFileNameReset | 1.3.6.1.4.1.6141.2.60.12.1.1.6 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Setting this object resets the name of the last configuration file that was successfully executed by the device. | |||||||||||||
| SwwpLeosSystemServiceMode | 1.3.6.1.4.1.6141.2.60.12.1.1.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting this object changes the service mode of operation. It causes the device to reboot. If this object is set to 'none' the device rejects the request and returns an error. Applicable to 311v only.
| |||||||||||||
| SwwpLeosSystemConfigBackupGateway | 1.3.6.1.4.1.6141.2.60.12.1.1.8 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Backup gateway IP address. | |||||||||||||
| SwwpLeosSystemConfigCustomerCfgFile | 1.3.6.1.4.1.6141.2.60.12.1.1.9 | FileName | RW | ||||||||||
scalar · FileName · read-write · current This object sets the name of the default customer configuration file, which is the file that is copied to the default configuration file during a reset-to-customer-default operation. Setting this object to an empty string removes the file name from the system configuration. | |||||||||||||
| TwwpLeosSystemConfigDefaultGatewayTable | 1.3.6.1.4.1.6141.2.60.12.1.1.10 | NA | |||||||||||
table · not-accessible · current The (conceptual) table listing the default gateways. | |||||||||||||
| RwwpLeosSystemConfigDefaultGatewayEntry | 1.3.6.1.4.1.6141.2.60.12.1.1.10.1 | NA | |||||||||||
row · not-accessible · current An entry (conceptual row) in the wwpLeosSystemConfigDefaultGatewayTable. | |||||||||||||
| CwwpLeosSystemConfigDefaultGatewayIndex | 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.1 | Integer32 (1..16) | NA | ||||||||||
column · Integer32 (1..16) · not-accessible · current Unique identifier to the table. | |||||||||||||
| CwwpLeosSystemConfigDefaultGatewayInetAddrType | 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.2 | InetAddressType | RC | ||||||||||
column · InetAddressType · read-create · current The Inet address type of default gateway. Used in conjunction with
wwpLeosSystemConfigDefaultGatewayInetAddress.
When set to :
Ipv4: wwpLeosSystemConfigDefaultGatewayInetAddress should be compliant with
InetAddressIPv4 from RFC 4001
Ipv6: wwpLeosSystemConfigDefaultGatewayInetAddress should be compliant with
InetAddressIPv6 from RFC 4001. | |||||||||||||
| CwwpLeosSystemConfigDefaultGatewayInetAddress | 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.3 | InetAddress | RC | ||||||||||
column · InetAddress · read-create · current Default gateway IP address. This OID must be used in conjunction with wwpLeosSystemConfigDefaultGatewayInetAddrType. The InetAddress set here should be compliant with RFC 4001 InetAddressType. When this OID is set, wwpLeosSystemConfigDefaultGateway is set to 0.0.0.0. | |||||||||||||
| CwwpLeosSystemConfigDefaultGatewayInterfaceName | 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.4 | DisplayString | RC | ||||||||||
column · DisplayString · read-create · current Interface Name of the gateway, local or remote. | |||||||||||||
| CwwpLeosSystemConfigDefaultGatewayMetric | 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Metric of the gateway. | |||||||||||||
| CwwpLeosSystemConfigDefaultGatewayStatus | 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.6 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'. | |||||||||||||
| TwwpLeosSystemConfigBackupGatewayTable | 1.3.6.1.4.1.6141.2.60.12.1.1.11 | NA | |||||||||||
table · not-accessible · current The (conceptual) table listing the default gateways | |||||||||||||
| RwwpLeosSystemConfigBackupGatewayEntry | 1.3.6.1.4.1.6141.2.60.12.1.1.11.1 | NA | |||||||||||
row · not-accessible · current An entry (conceptual row) in the wwpLeosSystemConfigBackupGatewayTable. | |||||||||||||
| CwwpLeosSystemConfigBackupGatewayIndex | 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.1 | Integer32 (1..16) | NA | ||||||||||
column · Integer32 (1..16) · not-accessible · current Unique identifier to the table. | |||||||||||||
| CwwpLeosSystemConfigBackupGatewayInetAddrType | 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.2 | InetAddressType | RC | ||||||||||
column · InetAddressType · read-create · current The Inet address type of backup gateway. Used in conjunction with
wwpLeosSystemConfigBackupGatewayInetAddress.
When set to :
ipv4: wwpLeosSystemConfigBackupGatewayInetAddress should be compliant with
InetAddressIPv4 from RFC 4001
ipv6: wwpLeosSystemConfigBackupGatewayInetAddress should be compliant with
InetAddressIPv6 from RFC 4001. | |||||||||||||
| CwwpLeosSystemConfigBackupGatewayInetAddress | 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.3 | InetAddress | RC | ||||||||||
column · InetAddress · read-create · current Backup gateway IP address. This OID must be used in conjunction with wwpLeosSystemConfigBackupGatewayInetAddrType. The InetAddress set here should be compliant with rfc 4001 InetAddressType. When this OID is set, wwpLeosSystemConfigBackupGateway is set ot 0.0.0.0. | |||||||||||||
| CwwpLeosSystemConfigBackupGatewayInterfaceName | 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.4 | DisplayString | RC | ||||||||||
column · DisplayString · read-create · current Interface Name of the gateway, local or remote. | |||||||||||||
| CwwpLeosSystemConfigBackupGatewayMetric | 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Metric of the gateway. | |||||||||||||
| CwwpLeosSystemConfigBackupGatewayStatus | 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.6 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'. | |||||||||||||
| NwwpLeosSystemConfig | 1.3.6.1.4.1.6141.2.60.12.1.2 | ||||||||||||
| SwwpLeosSystemConfigSaveFileName | 1.3.6.1.4.1.6141.2.60.12.1.2.1 | FileName | RW | ||||||||||
scalar · FileName · read-write · current wwpLeosSystemConfigSaveFileName specifies the name of the config file to be used when wwpLeosSystemConfigControl has been set to 'save'. If this object is not set the device uses the file name specified by wwpLeosSystemConfigSavePermFile. If wwpLeosSystemConfigSavePermFile is also not set, the default configuration file name i.e startup-config is used to save the config. Once 'wwpLeosSystemConfigControl' has been successfully applied, a read on wwpLeosSystemConfigSaveFileName always returns an empty string else it shows what the user has configured. | |||||||||||||
| SwwpLeosSystemConfigControl | 1.3.6.1.4.1.6141.2.60.12.1.2.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls configuration options on the device. The current options are: save: to make the configuration changes made using SNMP persistent across a reboot. mfgDefaultCfg: Set system configuration to factory defaults. Note: This wipes out all the current configuration including password and VLAN information. If the system does not support any of these control configuration options, it returns an error while trying to set this object to the specific option. A read on this object returns none(0).
| |||||||||||||
| SwwpLeosSystemConfigFilepath | 1.3.6.1.4.1.6141.2.60.12.1.2.3 | FileName | RO | ||||||||||
scalar · FileName · read-only · current Returns the path for configuration related files. | |||||||||||||
| TwwpLeosSystemConfigFileTable | 1.3.6.1.4.1.6141.2.60.12.1.2.4 | NA | |||||||||||
table · not-accessible · current The (conceptual) table listing the configs | |||||||||||||
| RwwpLeosSystemConfigFileEntry | 1.3.6.1.4.1.6141.2.60.12.1.2.4.1 | NA | |||||||||||
row · not-accessible · current An entry (conceptual row) in the wwpLeosSystemConfigFileTable. | |||||||||||||
| CwwpLeosSystemConfigFileIndex | 1.3.6.1.4.1.6141.2.60.12.1.2.4.1.1 | Integer32 (1..65535) | NA | ||||||||||
column · Integer32 (1..65535) · not-accessible · current Unique identifier to the table. | |||||||||||||
| CwwpLeosSystemConfigFileName | 1.3.6.1.4.1.6141.2.60.12.1.2.4.1.2 | FileName | RO | ||||||||||
column · FileName · read-only · current The name of the configuration file. | |||||||||||||
| CwwpLeosSystemConfigActivateFile | 1.3.6.1.4.1.6141.2.60.12.1.2.4.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set this object to 'loadCfg to load the 'wwpLeosSystemConfigFileName' configuration.
If the operation is successful, this object performs
the CLI equivalent to these commands and returns the status.
Setting this object to 'resetToCfg' kills the load module, reloads a new load module and
applies the config file specified by wwpLeosSystemConfigFileName.
Setting this object to 'none' does nothing.
| |||||||||||||
| NwwpLeosSystemTelnet | 1.3.6.1.4.1.6141.2.60.12.1.3 | ||||||||||||
| SwwpLeosTelnetMaxBaseUserSessions | 1.3.6.1.4.1.6141.2.60.12.1.3.1 | Integer32 (0..10) | RW | ||||||||||
scalar · Integer32 (0..10) · read-write · current The max number of limited user CLI sessions for the device. Includes both SSH and telnet sessions. | |||||||||||||
| SwwpLeosTelnetMaxSuperUserSessions | 1.3.6.1.4.1.6141.2.60.12.1.3.2 | Integer32 (0..10) | RW | ||||||||||
scalar · Integer32 (0..10) · read-write · current The max number of super user CLI sessions for the device. Includes both SSH and telnet sessions. | |||||||||||||
| SwwpLeosTelnetMaxAdminUserSessions | 1.3.6.1.4.1.6141.2.60.12.1.3.3 | Integer32 (0..10) | RW | ||||||||||
scalar · Integer32 (0..10) · read-write · current The max number of admin users CLI sessions for the device. Includes both SSH and telnet sessions. | |||||||||||||
| NwwpLeosSystemCpuLoadQuery | 1.3.6.1.4.1.6141.2.60.12.1.7 | ||||||||||||
| SwwpLeosSystemCpuLoad1Min | 1.3.6.1.4.1.6141.2.60.12.1.7.1 | Integer32 (1..65535) | RO | ||||||||||
scalar · Integer32 (1..65535) · read-only · current The OID to display CPU load in last 1 minute. This value is an integer representation of the CPU load (load average * 100). | |||||||||||||
| SwwpLeosSystemCpuLoad10Min | 1.3.6.1.4.1.6141.2.60.12.1.7.2 | Integer32 (1..65535) | RO | ||||||||||
scalar · Integer32 (1..65535) · read-only · current The OID to display CPU load in last 10 minutes. This value is an integer representation of the CPU load (load average * 100). | |||||||||||||
| SwwpLeosSystemCpuLoad15Min | 1.3.6.1.4.1.6141.2.60.12.1.7.3 | Integer32 (1..65535) | RO | ||||||||||
scalar · Integer32 (1..65535) · read-only · current The OID to display CPU load in last 15 minutes. This value is an integer representation of the CPU load (load average * 100). | |||||||||||||
| SwwpLeosSystemCpuLoad5Min | 1.3.6.1.4.1.6141.2.60.12.1.7.4 | Integer32 (1..65535) | RO | ||||||||||
scalar · Integer32 (1..65535) · read-only · current The OID to display CPU load in last 5 minutes. This value is an integer representation of the CPU load (load average * 100). | |||||||||||||
| SwwpLeosSystemCpuLoad1MinMinimum | 1.3.6.1.4.1.6141.2.60.12.1.7.5 | Integer32 (1..65535) | RO | ||||||||||
scalar · Integer32 (1..65535) · read-only · current The minimum 1 minute CPU load average. This value is an integer representation of the CPU load (load average * 100). | |||||||||||||
| SwwpLeosSystemCpuLoad1MinMaximum | 1.3.6.1.4.1.6141.2.60.12.1.7.6 | Integer32 (1..65535) | RO | ||||||||||
scalar · Integer32 (1..65535) · read-only · current The maximum 1 minute CPU load average. This value is an integer representation of the CPU load (load average * 100). | |||||||||||||
| SwwpLeosSystemCpuLoad1MinState | 1.3.6.1.4.1.6141.2.60.12.1.7.7 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The 1 minute CPU load average state.
| |||||||||||||
| SwwpLeosSystemCpuLoad15MinMinimum | 1.3.6.1.4.1.6141.2.60.12.1.7.8 | Integer32 (1..65535) | RO | ||||||||||
scalar · Integer32 (1..65535) · read-only · current The minimum 15 minute CPU load average. This value is an integer representation of the CPU load (load average * 100). | |||||||||||||
| SwwpLeosSystemCpuLoad15MinMaximum | 1.3.6.1.4.1.6141.2.60.12.1.7.9 | Integer32 (1..65535) | RO | ||||||||||
scalar · Integer32 (1..65535) · read-only · current The maximum 15 minute CPU load average. This value is an integer representation of the CPU load (load average * 100). | |||||||||||||
| SwwpLeosSystemCpuLoad15MinState | 1.3.6.1.4.1.6141.2.60.12.1.7.10 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The 15 minute CPU load average state.
| |||||||||||||
| SwwpLeosSystemCpuLoad5MinMinimum | 1.3.6.1.4.1.6141.2.60.12.1.7.11 | Integer32 (1..65535) | RO | ||||||||||
scalar · Integer32 (1..65535) · read-only · current The minimum 5 minute CPU load average. This value is an integer representation of the CPU load (load average * 100). | |||||||||||||
| SwwpLeosSystemCpuLoad5MinMaximum | 1.3.6.1.4.1.6141.2.60.12.1.7.12 | Integer32 (1..65535) | RO | ||||||||||
scalar · Integer32 (1..65535) · read-only · current The maximum 5 minute CPU load average. This value is an integer representation of the CPU load (load average * 100). | |||||||||||||
| SwwpLeosSystemCpuLoad5MinState | 1.3.6.1.4.1.6141.2.60.12.1.7.13 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The 5 minute CPU load average state.
| |||||||||||||
| NwwpLeosSystemConfigNotif | 1.3.6.1.4.1.6141.2.60.12.1.8 | ||||||||||||
| TwwpLeosSystemConfigNotifTable | 1.3.6.1.4.1.6141.2.60.12.1.8.1 | NA | |||||||||||
table · not-accessible · current The (conceptual) table listing the configuration file line numbers. This table is only used when sending wwpLeosImproperCmdInConfigFile notification. No Get, GetNext or Set is allowed in this table. | |||||||||||||
| RwwpLeosSystemConfigNotifEntry | 1.3.6.1.4.1.6141.2.60.12.1.8.1.1 | NA | |||||||||||
row · not-accessible · current An entry (conceptual row) in the wwpLeosSystemConfigNotifTable. No Get, GetNext or Set is allowed in this table. | |||||||||||||
| CwwpLeosSystemConfigErrLineNum | 1.3.6.1.4.1.6141.2.60.12.1.8.1.1.1 | Integer32 (0..64) | RO | ||||||||||
column · Integer32 (0..64) · read-only · current The OID is sent in the wwpLeosImproperCmdInConfigFile trap to identify the line number that failed when the configuration was applied. No Get, GetNext or Set is allowed in this table. | |||||||||||||
| CwwpLeosSystemConfigErrStr | 1.3.6.1.4.1.6141.2.60.12.1.8.1.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The OID is wwpLeosSystemConfigErrStr trap to identify the line that failed when the configuration was applied. No Get, GetNext or Set is allowed on this table. | |||||||||||||
| CwwpLeosSystemConfigErrLinesTotal | 1.3.6.1.4.1.6141.2.60.12.1.8.1.1.3 | Integer32 (0..64) | RO | ||||||||||
column · Integer32 (0..64) · read-only · current The OID is sent in the wwpLeosImproperCmdInConfigFile trap to identify the total line numbers that failed when the configuration was applied. No Get, GetNext or Set is allowed in this table. | |||||||||||||
| NwwpLeosSystemMemoryUsageQuery | 1.3.6.1.4.1.6141.2.60.12.1.9 | ||||||||||||
| TwwpLeosSystemMemoryUsageTable | 1.3.6.1.4.1.6141.2.60.12.1.9.1 | NA | |||||||||||
table · not-accessible · current Table of Memory Usage for various Memory Pools. | |||||||||||||
| RwwpLeosSystemMemoryUsageEntry | 1.3.6.1.4.1.6141.2.60.12.1.9.1.1 | NA | |||||||||||
| CwwpLeosSystemMemoryUsagePoolIndex | 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current The Memory Pool type.
| |||||||||||||
| CwwpLeosSystemMemoryUsageMemoryTotal | 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.2 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Total size of the Memory Pool in bytes.
| |||||||||||||
| CwwpLeosSystemMemoryUsageMemoryLWM | 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.3 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Lowest free memory in the Memory Pool in bytes. Not supported in SAOS 6.x | |||||||||||||
| CwwpLeosSystemMemoryUsageMemoryFree | 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.4 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Amount of free memory in the Memory Pool in bytes. This corresponds to the CLI's memory never used.
| |||||||||||||
| CwwpLeosSystemMemoryUsageStatus | 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Denotes if the free memory amount is normal or below limit.
| |||||||||||||
| CwwpLeosSystemMemoryUsageMemoryUsed | 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.6 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Amount of used memory in the Memory Pool in bytes.
| |||||||||||||
| CwwpLeosSystemMemoryUsageMemoryAvailable | 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.7 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Amount of available memory in the Memory Pool in bytes.
| |||||||||||||
| NwwpLeosSystemXFtp | 1.3.6.1.4.1.6141.2.60.12.1.10 | ||||||||||||
| SwwpLeosSystemXFtpMode | 1.3.6.1.4.1.6141.2.60.12.1.10.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Select between modes of file transfer. The default mode is tftp.
| |||||||||||||
| SwwpLeosSystemXFtpServer | 1.3.6.1.4.1.6141.2.60.12.1.10.2 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current IP address or the host name of default server. | |||||||||||||
| SwwpLeosSystemXFtpUserName | 1.3.6.1.4.1.6141.2.60.12.1.10.3 | DisplayString (SIZE (0..32)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..32)) · read-write · current Name used to login with. | |||||||||||||
| SwwpLeosSystemXFtpPasswd | 1.3.6.1.4.1.6141.2.60.12.1.10.4 | DisplayString (SIZE (0..128)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..128)) · read-write · current Password used to login with. | |||||||||||||
| SwwpLeosSystemXFtpNumOfRetries | 1.3.6.1.4.1.6141.2.60.12.1.10.5 | Integer32 (1..10) | RW | ||||||||||
scalar · Integer32 (1..10) · read-write · current Number of times to retry a file transfer request if it fails. | |||||||||||||
| SwwpLeosSystemXFtpRetryInterval | 1.3.6.1.4.1.6141.2.60.12.1.10.6 | Integer32 (1..300) | RW | ||||||||||
scalar · Integer32 (1..300) · read-write · current Length of time in seconds to wait before retrying a file transfer if it fails. | |||||||||||||
| SwwpLeosSystemXFtpConnectionTimeout | 1.3.6.1.4.1.6141.2.60.12.1.10.7 | Integer32 (1..100) | RW | ||||||||||
scalar · Integer32 (1..100) · read-write · current Length of time in seconds to wait before connection times out. | |||||||||||||
| TwwpLeosSystemXFtpTFtpServerTable | 1.3.6.1.4.1.6141.2.60.12.1.10.8 | NA | |||||||||||
table · not-accessible · current The (conceptual) table listing the default TFTP server | |||||||||||||
| RwwpLeosSystemXFtpTFtpServerEntry | 1.3.6.1.4.1.6141.2.60.12.1.10.8.1 | NA | |||||||||||
row · not-accessible · current An entry (conceptual row) in the wwpLeosSystemXFtpTFtpServerTable. | |||||||||||||
| CwwpLeosSystemXFtpTFtpServerIndex | 1.3.6.1.4.1.6141.2.60.12.1.10.8.1.1 | Integer32 (1) | NA | ||||||||||
column · Integer32 (1) · not-accessible · current Unique identifier to the table. | |||||||||||||
| CwwpLeosSystemXFtpTFtpServerHostName | 1.3.6.1.4.1.6141.2.60.12.1.10.8.1.2 | DisplayString | RC | ||||||||||
column · DisplayString · read-create · current Host name or IP address of the default TFTP server. | |||||||||||||
| CwwpLeosSystemXFtpTFtpServerRowStatus | 1.3.6.1.4.1.6141.2.60.12.1.10.8.1.6 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'. At the current time, there is only one, static row in this table, with index 1. | |||||||||||||
| TwwpLeosSystemXFtpFtpServerTable | 1.3.6.1.4.1.6141.2.60.12.1.10.9 | NA | |||||||||||
table · not-accessible · current The (conceptual) table listing the default FTP server. | |||||||||||||
| RwwpLeosSystemXFtpFtpServerEntry | 1.3.6.1.4.1.6141.2.60.12.1.10.9.1 | NA | |||||||||||
row · not-accessible · current An entry (conceptual row) in the wwpLeosSystemXFtpFtpServerTable. | |||||||||||||
| CwwpLeosSystemXFtpFtpServerIndex | 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.1 | Integer32 (1) | NA | ||||||||||
column · Integer32 (1) · not-accessible · current Unique identifier to the table. | |||||||||||||
| CwwpLeosSystemXFtpFtpServerHostName | 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.2 | DisplayString | RC | ||||||||||
column · DisplayString · read-create · current Host name or IP address of the default FTP server. | |||||||||||||
| CwwpLeosSystemXFtpFtpServerUserName | 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.3 | DisplayString | RC | ||||||||||
column · DisplayString · read-create · current User name / login ID to be used with the default FTP server. | |||||||||||||
| CwwpLeosSystemXFtpFtpServerPassword | 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.4 | DisplayString | RC | ||||||||||
column · DisplayString · read-create · current Password to be used with the default FTP server. Returns an empty string when read. Either the password or the secret may be set, but not both. | |||||||||||||
| CwwpLeosSystemXFtpFtpServerSecret | 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.5 | OCTET STRING (SIZE (0..259)) | RC | ||||||||||
column · OCTET STRING (SIZE (0..259)) · read-create · current Password secret to be used with the default FTP server. Either the password or the secret may be set, but not both. | |||||||||||||
| CwwpLeosSystemXFtpFtpServerRowStatus | 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.6 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'. At the current time, there is only one, static row in this table, with index 1. | |||||||||||||
| TwwpLeosSystemXFtpSFtpServerTable | 1.3.6.1.4.1.6141.2.60.12.1.10.10 | NA | |||||||||||
table · not-accessible · current The (conceptual) table listing the default SFTP server | |||||||||||||
| RwwpLeosSystemXFtpSFtpServerEntry | 1.3.6.1.4.1.6141.2.60.12.1.10.10.1 | NA | |||||||||||
row · not-accessible · current An entry (conceptual row) in the wwpLeosSystemXFtpSFtpServerTable. | |||||||||||||
| CwwpLeosSystemXFtpSFtpServerIndex | 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.1 | Integer32 (1) | NA | ||||||||||
column · Integer32 (1) · not-accessible · current Unique identifier to the table. | |||||||||||||
| CwwpLeosSystemXFtpSFtpServerHostName | 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.2 | DisplayString | RC | ||||||||||
column · DisplayString · read-create · current Host name or IP address of the default SFTP server. | |||||||||||||
| CwwpLeosSystemXFtpSFtpServerUserName | 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.3 | DisplayString | RC | ||||||||||
column · DisplayString · read-create · current User name / login ID to be used with the default SFTP server. | |||||||||||||
| CwwpLeosSystemXFtpSFtpServerPassword | 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.4 | DisplayString | RC | ||||||||||
column · DisplayString · read-create · current Password to be used with the default SFTP server. Returns an empty string when read. Either the password or the secret may be set, but not both. | |||||||||||||
| CwwpLeosSystemXFtpSFtpServerSecret | 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.5 | OCTET STRING (SIZE (0..259)) | RC | ||||||||||
column · OCTET STRING (SIZE (0..259)) · read-create · current Password secret to be used with the default SFTP server. Either the password or the secret may be set, but not both. | |||||||||||||
| CwwpLeosSystemXFtpSFtpServerRowStatus | 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.6 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'. At the current time, there is only one, static row in this table, with index 1. | |||||||||||||
| SwwpLeosSystemXFtpSecret | 1.3.6.1.4.1.6141.2.60.12.1.10.11 | OCTET STRING (SIZE (0..259)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (0..259)) · read-write · current Sets the pre-encypted secret. This global secret will be automatically applied to either the ftp or sftp table, depending on the value of the wwpLeosSystemXFtpMode object. | |||||||||||||
| NwwpLeosSystemXFtpSftp | 1.3.6.1.4.1.6141.2.60.12.1.10.12 | ||||||||||||
| NwwpLeosSystemXFtpSftpClient | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1 | ||||||||||||
| NwwpLeosSystemXftpSftpClientAlgorithm | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1 | ||||||||||||
| TwwpLeosSystemXftpSftpClientKexAlgorithmTable | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1 | NA | |||||||||||
table · not-accessible · current The (conceptual) table listing the SFTP Client's SSH key-exchange (KEX) algorithms. | |||||||||||||
| RwwpLeosSystemXftpSftpClientKexAlgorithmEntry | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1.1 | NA | |||||||||||
row · not-accessible · current An entry (conceptual row) in the wwpLeosSystemXftpSftpClientKexAlgorithmTable. | |||||||||||||
| CwwpLeosSystemXftpSftpClientKexAlgorithmIndex | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current An arbitrary index into the table identifying a unique algorithm as identified by the value of wwpLeosSystemXftpSftpClientKexAlgorithmName. | |||||||||||||
| CwwpLeosSystemXftpSftpClientKexAlgorithmName | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Name of the algorithm as used by the SFTP client's SSH protocol when negotiating the key exchange algorithm with SSH servers. | |||||||||||||
| CwwpLeosSystemXftpSftpClientKexAlgorithmAdminState | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The administrative state of the algorithm, indicating whether the administrative settings are set to allow the inclusion of the specified algorithm in the key exchange algorithm negotiation process. Such inclusion or exclusion of the algorithm is indicated by the corresponding value of wwpLeosSystemXftpSftpClientKexAlgorithmOperState.
| |||||||||||||
| CwwpLeosSystemXftpSftpClientKexAlgorithmOperState | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The operational state of the algorithm, indicating whether the specified algorithm will be included in the key exchange algorithm negotiation process. The operational state is determined based on the corresponding value of wwpLeosSystemXftpSftpClientKexAlgorithmAdminState as well as other system attributes which may limit the allowable algorithms that may be used.
| |||||||||||||
| CwwpLeosSystemXftpSftpClientKexAlgorithmPriority | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1.1.5 | Unsigned32 (1..3) | RW | ||||||||||
column · Unsigned32 (1..3) · read-write · current The priority, or importance, of the specified algorithm amongst the other algorithms in this table. Value 1 is highest priority. During the key exchange algorithm negotiation, the SFTP client's SSH protocol will consider all operationally enabled algorithms in order of priority, as part of the algorithm negotiation process. When the priority of one algorithm is set to a new value, it will necessarily cause the priority of other algorithms to adjust in order to make room for the new set priority of the algorithm. | |||||||||||||
| TwwpLeosSystemXftpSftpClientServerHostKeyAlgorithmTable | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2 | NA | |||||||||||
table · not-accessible · current The (conceptual) table listing the SFTP client's SSH server host key algorithms. | |||||||||||||
| RwwpLeosSystemXftpSftpClientServerHostKeyAlgorithmEntry | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2.1 | NA | |||||||||||
row · not-accessible · current An entry (conceptual row) in the wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmTable. | |||||||||||||
| CwwpLeosSystemXftpSftpClientServerHostKeyAlgorithmIndex | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current An arbitrary index into the table identifying a unique algorithm as identified by the value of wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmName. | |||||||||||||
| CwwpLeosSystemXftpSftpClientServerHostKeyAlgorithmName | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Name of the algorithm as used by the SFTP client's SSH protocol when negotiating the server host key algorithm with SSH servers. | |||||||||||||
| CwwpLeosSystemXftpSftpClientServerHostKeyAlgorithmAdminState | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The administrative state of the algorithm, indicating whether the administrative settings are set to allow the inclusion of the specified algorithm in the server host key algorithm negotiation process. Such inclusion or exclusion of the algorithm is indicated by the corresponding value of wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmOperState.
| |||||||||||||
| CwwpLeosSystemXftpSftpClientServerHostKeyAlgorithmOperState | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The operational state of the algorithm, indicating whether the specified algorithm will be included in the server host key algorithm negotiation process. The operational state is determined based on the corresponding value of wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmAdminState as well as other system attributes which may limit the allowable algorithms that may be used.
| |||||||||||||
| CwwpLeosSystemXftpSftpClientServerHostKeyAlgorithmPriority | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2.1.5 | Unsigned32 (1..6) | RW | ||||||||||
column · Unsigned32 (1..6) · read-write · current The priority, or importance, of the specified algorithm amongst the other algorithms in this table. Value 1 is highest priority. During the server host key algorithm negotiation, the SFTP client's SSH protocol will consider all operationally enabled algorithms in order of priority, as part of the algorithm negotiation process. When the priority of an algorithm is set to a new value, it will necessarily cause the priority of other algorithms to adjust in order to make room for the new set priority of the algorithm. | |||||||||||||
| TwwpLeosSystemXftpSftpClientEncryptionAlgorithmTable | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3 | NA | |||||||||||
table · not-accessible · current The (conceptual) table listing the SFTP client's SSH encryption algorithms. | |||||||||||||
| RwwpLeosSystemXftpSftpClientEncryptionAlgorithmEntry | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3.1 | NA | |||||||||||
row · not-accessible · current An entry (conceptual row) in the wwpLeosSystemXftpSftpClientEncryptionAlgorithmTable. | |||||||||||||
| CwwpLeosSystemXftpSftpClientEncryptionAlgorithmIndex | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current An arbitrary index into the table identifying a unique algorithm as identified by the value of wwpLeosSystemXftpSftpClientEncryptionAlgorithmAdminState. | |||||||||||||
| CwwpLeosSystemXftpSftpClientEncryptionAlgorithmName | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Name of the algorithm as used by the SFTP client SSH protocol when negotiating the encryption algorithm with SSH servers. | |||||||||||||
| CwwpLeosSystemXftpSftpClientEncryptionAlgorithmAdminState | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The administrative state of the algorithm, indicating whether the administrative settings are set to allow the inclusion of the specified algorithm in the encryption algorithm negotiation process. Such inclusion or exclusion of the algorithm is indicated by the corresponding value of wwpLeosSystemXftpSftpClientEncryptionAlgorithmOperState.
| |||||||||||||
| CwwpLeosSystemXftpSftpClientEncryptionAlgorithmOperState | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The operational state of the algorithm, indicating whether the specified algorithm will be included in the encryption algorithm negotiation process. The operational state is determined based on the corresponding value of wwpLeosSystemXftpSftpClientEncryptionAlgorithmAdminState as well as other system attributes which may limit the allowable algorithms that may be used.
| |||||||||||||
| CwwpLeosSystemXftpSftpClientEncryptionAlgorithmPriority | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3.1.5 | Unsigned32 (1..12) | RW | ||||||||||
column · Unsigned32 (1..12) · read-write · current The priority, or importance, of the specified algorithm amongst the other algorithms in this table. Value 1 is highest priority. During the encryption algorithm negotiation, the SFTP client's SSH protocol will consider all operationally enabled algorithms in order of priority, as part of the algorithm negotiation process. When the priority of one algorithm is set to a new value, it will necessarily cause the priority of other algorithms to adjust in order to make room for the new set priority of the algorithm. | |||||||||||||
| TwwpLeosSystemXftpSftpClientMacAlgorithmTable | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4 | NA | |||||||||||
table · not-accessible · current The (conceptual) table listing the SFTP client's SSH message authentication code (MAC) algorithms. | |||||||||||||
| RwwpLeosSystemXftpSftpClientMacAlgorithmEntry | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4.1 | NA | |||||||||||
row · not-accessible · current An entry (conceptual row) in the wwpLeosSystemXftpSftpClientMacAlgorithmTable. | |||||||||||||
| CwwpLeosSystemXftpSftpClientMacAlgorithmIndex | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current An arbitrary index into the table identifying a unique algorithm as identified by the value of wwpLeosSystemXftpSftpClientMacAlgorithmName. | |||||||||||||
| CwwpLeosSystemXftpSftpClientMacAlgorithmName | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Name of the algorithm as used by the SFTP client's SSH protocol when negotiating the message authentication code algorithm with SSH servers. | |||||||||||||
| CwwpLeosSystemXftpSftpClientMacAlgorithmAdminState | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The administrative state of the algorithm, indicating whether the administrative settings are set to allow the inclusion of the specified algorithm in the message authentication code algorithm negotiation process. Such inclusion or exclusion of the algorithm is indicated by the corresponding value of wwpLeosSystemXftpSftpClientMacAlgorithmOperState.
| |||||||||||||
| CwwpLeosSystemXftpSftpClientMacAlgorithmOperState | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The operational state of the algorithm, indicating whether the specified algorithm will be included in the message authentication code algorithm negotiation process. The operational state is determined based on the corresponding value of wwpLeosSystemXftpSftpClientMacAlgorithmAdminState as well as other system attributes which may limit the allowable algorithms that may be used.
| |||||||||||||
| CwwpLeosSystemXftpSftpClientMacAlgorithmPriority | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4.1.5 | Unsigned32 (1..6) | RW | ||||||||||
column · Unsigned32 (1..6) · read-write · current The priority, or importance, of the specified algorithm amongst the other algorithms in this table. Value 1 is highest priority. During the message authentication code algorithm negotiation, the SFTP client's SSH protocol will consider all operationally enabled algorithms in order or priority, as part of the algorithm negotiation process. When the priority of an algorithm is set to a new value, it will necessarily cause the priority of other algorithms to adjust in order to make room for the new set priority of the algorithm. | |||||||||||||
| TwwpLeosSystemXftpSftpClientCompressionAlgorithmTable | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5 | NA | |||||||||||
table · not-accessible · current The (conceptual) table listing the SFTP client's SSH compression algorithms. NOTE: At this time the system xftp feature only supports 'none' compression algorithm. This table is provided for completeness since the compression algorithm is one of the algorithms negotiated during SSH connections. | |||||||||||||
| RwwpLeosSystemXftpSftpClientCompressionAlgorithmEntry | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5.1 | NA | |||||||||||
row · not-accessible · current An entry (conceptual row) in the wwpLeosSystemXftpSftpClientCompressionAlgorithmTable. | |||||||||||||
| CwwpLeosSystemXftpSftpClientCompressionAlgorithmIndex | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current An arbitrary index into the table identifying a unique algorithm as identified by the value of wwpLeosSystemXftpSftpClientCompressionAlgorithmAdminState. | |||||||||||||
| CwwpLeosSystemXftpSftpClientCompressionAlgorithmName | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Name of the algorithm as used by the SFTP client SSH protocol when negotiating the compression algorithm with SSH servers. | |||||||||||||
| CwwpLeosSystemXftpSftpClientCompressionAlgorithmAdminState | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The administrative state of the algorithm, indicating whether the administrative settings are set to allow the inclusion of the specified algorithm in the compression algorithm negotiation process. Such inclusion or exclusion of the algorithm is indicated by the corresponding value of wwpLeosSystemXftpSftpClientCompressionAlgorithmOperState.
| |||||||||||||
| CwwpLeosSystemXftpSftpClientCompressionAlgorithmOperState | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The operational state of the algorithm, indicating whether the specified algorithm will be included in the compression algorithm negotiation process. The operational state is determined based on the corresponding value of wwpLeosSystemXftpSftpClientCompressionAlgorithmAdminState as well as other system attributes which may limit the allowable algorithms that may be used.
| |||||||||||||
| CwwpLeosSystemXftpSftpClientCompressionAlgorithmPriority | 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5.1.5 | Unsigned32 (1) | RW | ||||||||||
column · Unsigned32 (1) · read-write · current The priority, or importance, of the specified algorithm amongst the other algorithms in this table. Value 1 is highest priority. During the compression algorithm negotiation, the SFTP client's SSH protocol will consider all operationally enabled algorithms in order of priority, as part of the algorithm negotiation process. When the priority of one algorithm is set to a new value, it will necessarily cause the priority of other algorithms to adjust in order to make room for the new set priority of the algorithm. | |||||||||||||
| NwwpLeosSystemCpuUtilization | 1.3.6.1.4.1.6141.2.60.12.1.11 | ||||||||||||
| SwwpLeosSystemCpuUtilizationLast5Seconds | 1.3.6.1.4.1.6141.2.60.12.1.11.1 | Integer32 (1..100) | RO | 36 | |||||||||
scalar · Integer32 (1..100) · read-only · current Average 5 second CPU usage measurement. Example values from LibreNMS test devices
| |||||||||||||
| SwwpLeosSystemCpuUtilizationLast5SecondsMinimum | 1.3.6.1.4.1.6141.2.60.12.1.11.2 | Integer32 (1..100) | RO | 8 | |||||||||
scalar · Integer32 (1..100) · read-only · current Minimum 5 second CPU usage measurement. Example values from LibreNMS test devices
| |||||||||||||
| SwwpLeosSystemCpuUtilizationLast5SecondsMaximum | 1.3.6.1.4.1.6141.2.60.12.1.11.3 | Integer32 (1..100) | RO | 81 | |||||||||
scalar · Integer32 (1..100) · read-only · current The maximum 5 second CPU usage measurement. Example values from LibreNMS test devices
| |||||||||||||
| SwwpLeosSystemCpuUtilizationLast5SecondsState | 1.3.6.1.4.1.6141.2.60.12.1.11.4 | INTEGER | RO | normal(1) | |||||||||
scalar · INTEGER · read-only · current The 5 second CPU usage state.
Example values from LibreNMS test devices
| |||||||||||||
| SwwpLeosSystemCpuUtilizationLast10Seconds | 1.3.6.1.4.1.6141.2.60.12.1.11.5 | Integer32 (1..100) | RO | 32 | |||||||||
scalar · Integer32 (1..100) · read-only · current The 10 second CPU usage measurement. Example values from LibreNMS test devices
| |||||||||||||
| SwwpLeosSystemCpuUtilizationLast10SecondsMinimum | 1.3.6.1.4.1.6141.2.60.12.1.11.6 | Integer32 (1..100) | RO | 9 | |||||||||
scalar · Integer32 (1..100) · read-only · current Minimum 10 second CPU usage measurement. Example values from LibreNMS test devices
| |||||||||||||
| SwwpLeosSystemCpuUtilizationLast10SecondsMaximum | 1.3.6.1.4.1.6141.2.60.12.1.11.7 | Integer32 (1..100) | RO | 79 | |||||||||
scalar · Integer32 (1..100) · read-only · current Maximum 10 second CPU usage measurement. Example values from LibreNMS test devices
| |||||||||||||
| SwwpLeosSystemCpuUtilizationLast10SecondsState | 1.3.6.1.4.1.6141.2.60.12.1.11.8 | INTEGER | RO | normal(1) | |||||||||
scalar · INTEGER · read-only · current The 10 second CPU usage state.
Example values from LibreNMS test devices
| |||||||||||||
| SwwpLeosSystemCpuUtilizationLast60Seconds | 1.3.6.1.4.1.6141.2.60.12.1.11.9 | Integer32 (1..100) | RO | 19 | |||||||||
scalar · Integer32 (1..100) · read-only · current The 60 second CPU usage state. Example values from LibreNMS test devices
| |||||||||||||
| SwwpLeosSystemCpuUtilizationLast60SecondsMinimum | 1.3.6.1.4.1.6141.2.60.12.1.11.10 | Integer32 (1..100) | RO | 11 | |||||||||
scalar · Integer32 (1..100) · read-only · current Minimum 60 second CPU usage measurement. Example values from LibreNMS test devices
| |||||||||||||
| SwwpLeosSystemCpuUtilizationLast60SecondsMaximum | 1.3.6.1.4.1.6141.2.60.12.1.11.11 | Integer32 (1..100) | RO | 52 | |||||||||
scalar · Integer32 (1..100) · read-only · current Maximum 60 second CPU usage measurement. Example values from LibreNMS test devices
| |||||||||||||
| SwwpLeosSystemCpuUtilizationLast60SecondsState | 1.3.6.1.4.1.6141.2.60.12.1.11.12 | INTEGER | RO | normal(1) | |||||||||
scalar · INTEGER · read-only · current The 60 second CPU state.
Example values from LibreNMS test devices
| |||||||||||||
| NwwpLeosSystemFileSystemUtilization | 1.3.6.1.4.1.6141.2.60.12.1.12 | ||||||||||||
| SwwpLeosSystemFileSystemUtilizationTmpfsCurrent | 1.3.6.1.4.1.6141.2.60.12.1.12.1 | Integer32 (1..100) | RO | ||||||||||
scalar · Integer32 (1..100) · read-only · current Current percentage usage of the /tmp/ directory in the filesystem. | |||||||||||||
| SwwpLeosSystemFileSystemUtilizationTmpfsMinimum | 1.3.6.1.4.1.6141.2.60.12.1.12.2 | Integer32 (1..100) | RO | ||||||||||
scalar · Integer32 (1..100) · read-only · current Minimum percentage usage of the /tmp/ directory in the file system. | |||||||||||||
| SwwpLeosSystemFileSystemUtilizationTmpfsMaximum | 1.3.6.1.4.1.6141.2.60.12.1.12.3 | Integer32 (1..100) | RO | ||||||||||
scalar · Integer32 (1..100) · read-only · current Maximum percentage usage of the /tmp/ directory in the file system. | |||||||||||||
| SwwpLeosSystemFileSystemUtilizationTmpfsState | 1.3.6.1.4.1.6141.2.60.12.1.12.4 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current state of the /tmp/ directory in the file system.
| |||||||||||||
| SwwpLeosSystemFileSystemUtilizationSysfsCurrent | 1.3.6.1.4.1.6141.2.60.12.1.12.5 | Integer32 (1..100) | RO | ||||||||||
scalar · Integer32 (1..100) · read-only · current Current percentage usage of the /mnt/sysfs/ directory in the file system. | |||||||||||||
| SwwpLeosSystemFileSystemUtilizationSysfsMinimum | 1.3.6.1.4.1.6141.2.60.12.1.12.6 | Integer32 (1..100) | RO | ||||||||||
scalar · Integer32 (1..100) · read-only · current Minimum percentage usage of the /mnt/sysfs/ directory in the file system. | |||||||||||||
| SwwpLeosSystemFileSystemUtilizationSysfsMaximum | 1.3.6.1.4.1.6141.2.60.12.1.12.7 | Integer32 (1..100) | RO | ||||||||||
scalar · Integer32 (1..100) · read-only · current Maximum percentage usage of the /mnt/sysfs/ directory in the file system. | |||||||||||||
| SwwpLeosSystemFileSystemUtilizationSysfsState | 1.3.6.1.4.1.6141.2.60.12.1.12.8 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current state of the /mnt/sysfs/ directory in the file system.
| |||||||||||||
| SwwpLeosSystemFileSystemUtilizationXftpCurrent | 1.3.6.1.4.1.6141.2.60.12.1.12.9 | Integer32 (1..100) | RO | ||||||||||
scalar · Integer32 (1..100) · read-only · current Current percentage usage of the /mnt/xftp/ directory in the file system. | |||||||||||||
| SwwpLeosSystemFileSystemUtilizationXftpMinimum | 1.3.6.1.4.1.6141.2.60.12.1.12.10 | Integer32 (1..100) | RO | ||||||||||
scalar · Integer32 (1..100) · read-only · current Minimum percentage usage of the /mnt/xftp/ directory in the file system. | |||||||||||||
| SwwpLeosSystemFileSystemUtilizationXftpMaximum | 1.3.6.1.4.1.6141.2.60.12.1.12.11 | Integer32 (1..100) | RO | ||||||||||
scalar · Integer32 (1..100) · read-only · current Maximum percentage usage of the /mnt/xftp/ directory in the file system. | |||||||||||||
| SwwpLeosSystemFileSystemUtilizationXftpState | 1.3.6.1.4.1.6141.2.60.12.1.12.12 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current state of the /mnt/xftp/ directory in the file system.
| |||||||||||||
| NwwpLeosSystemMemoryUtilization | 1.3.6.1.4.1.6141.2.60.12.1.13 | ||||||||||||
| SwwpLeosSystemMemoryUtilizationUsedMemoryCurrent | 1.3.6.1.4.1.6141.2.60.12.1.13.1 | Gauge32 | RO | ||||||||||
scalar · Gauge32 · read-only · current Current number of used memory in bytes. | |||||||||||||
| SwwpLeosSystemMemoryUtilizationUsedMemoryMinimum | 1.3.6.1.4.1.6141.2.60.12.1.13.2 | Gauge32 | RO | ||||||||||
scalar · Gauge32 · read-only · current Minimum number of used memory in bytes. | |||||||||||||
| SwwpLeosSystemMemoryUtilizationUsedMemoryMaximum | 1.3.6.1.4.1.6141.2.60.12.1.13.3 | Gauge32 | RO | ||||||||||
scalar · Gauge32 · read-only · current Maximum number of used memory in bytes. | |||||||||||||
| SwwpLeosSystemMemoryUtilizationAvailableMemoryCurrent | 1.3.6.1.4.1.6141.2.60.12.1.13.4 | Gauge32 | RO | ||||||||||
scalar · Gauge32 · read-only · current Current number of available memory in bytes. | |||||||||||||
| SwwpLeosSystemMemoryUtilizationAvailableMemoryMinimum | 1.3.6.1.4.1.6141.2.60.12.1.13.5 | Gauge32 | RO | ||||||||||
scalar · Gauge32 · read-only · current Minimum number of available memory in bytes. | |||||||||||||
| SwwpLeosSystemMemoryUtilizationAvailableMemoryMaximum | 1.3.6.1.4.1.6141.2.60.12.1.13.6 | Gauge32 | RO | ||||||||||
scalar · Gauge32 · read-only · current Maximum number of available memory in bytes. | |||||||||||||
| SwwpLeosSystemMemoryUtilizationAvailableMemoryState | 1.3.6.1.4.1.6141.2.60.12.1.13.7 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current state of the available memory.
| |||||||||||||
| NwwpLeosSystemGuardian | 1.3.6.1.4.1.6141.2.60.12.1.14 | ||||||||||||
| SwwpLeosSystemGuardianAdminEnable | 1.3.6.1.4.1.6141.2.60.12.1.14.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Sets the admin state for the system guardian. A reboot is required for changes to take effect
| |||||||||||||
| SwwpLeosSystemGuardianOperEnable | 1.3.6.1.4.1.6141.2.60.12.1.14.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Displays the current guardian operational state.
| |||||||||||||
| SwwpLeosSystemGuardianLimitNumReboots | 1.3.6.1.4.1.6141.2.60.12.1.14.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Limits the number of consecutive guardian reboots to 3 if set to on.
| |||||||||||||
| SwwpLeosSystemGuardianConsecutiveReboots | 1.3.6.1.4.1.6141.2.60.12.1.14.4 | Integer32 (1..65535) | RO | ||||||||||
scalar · Integer32 (1..65535) · read-only · current The current number of consecutive guardian reboots. | |||||||||||||
| SwwpLeosSystemGuardianTotalReboots | 1.3.6.1.4.1.6141.2.60.12.1.14.5 | Integer32 (1..65535) | RO | ||||||||||
scalar · Integer32 (1..65535) · read-only · current The total number of guardian reboots. | |||||||||||||
| NwwpLeosSystemServers | 1.3.6.1.4.1.6141.2.60.12.1.15 | ||||||||||||
| SwwpLeosSystemSftpServerAdminState | 1.3.6.1.4.1.6141.2.60.12.1.15.1 | SystemServerAdminState | RW | ||||||||||
scalar · SystemServerAdminState · read-write · current Sets the administrative state for the SFTP server. | |||||||||||||
| SwwpLeosSystemFtpServerAdminState | 1.3.6.1.4.1.6141.2.60.12.1.15.2 | SystemServerAdminState | RW | ||||||||||
scalar · SystemServerAdminState · read-write · current Sets the administrative state for the FTP server. | |||||||||||||
| SwwpLeosSystemTftpServerAdminState | 1.3.6.1.4.1.6141.2.60.12.1.15.3 | SystemServerAdminState | RW | ||||||||||
scalar · SystemServerAdminState · read-write · current Sets the administrative state for the TFTP server. | |||||||||||||
| SwwpLeosSystemScpServerAdminState | 1.3.6.1.4.1.6141.2.60.12.1.15.4 | SystemServerAdminState | RW | ||||||||||
scalar · SystemServerAdminState · read-write · current Sets the administrative state for the SCP server. | |||||||||||||
| NwwpLeosSystemClients | 1.3.6.1.4.1.6141.2.60.12.1.16 | ||||||||||||
| SwwpLeosSystemFtpClientAdminState | 1.3.6.1.4.1.6141.2.60.12.1.16.2 | SystemClientAdminState | RW | ||||||||||
scalar · SystemClientAdminState · read-write · current Sets the administrative state for the FTP client. | |||||||||||||
| SwwpLeosSystemTftpClientAdminState | 1.3.6.1.4.1.6141.2.60.12.1.16.3 | SystemClientAdminState | RW | ||||||||||
scalar · SystemClientAdminState · read-write · current Sets the administrative state for the TFTP client. | |||||||||||||
| NwwpLeosSystemConfigMIBNotificationPrefix | 1.3.6.1.4.1.6141.2.60.12.2 | ||||||||||||
| NwwpLeosSystemConfigMIBNotifications | 1.3.6.1.4.1.6141.2.60.12.2.0 | ||||||||||||
| !wwpLeosImproperCmdInConfigFile | 1.3.6.1.4.1.6141.2.60.12.2.0.1 | ||||||||||||
notification · current A wwpLeosImproperCmdInConfigFile notif signifies that the SNMP entity, acting in an agent role, has counted the number of improper commands that were found in the configuration file while processing the wwpLeosSystemConfigFileName | |||||||||||||
| !wwpLeosSystemServiceModeChange | 1.3.6.1.4.1.6141.2.60.12.2.0.2 | ||||||||||||
notification · current A wwpLeosSystemServiceModeChange notification is sent whenever someone changes the system service mode between mpls and pbt.
| |||||||||||||
| !wwpLeosSystemMemoryStatusNotification | 1.3.6.1.4.1.6141.2.60.12.2.0.3 | ||||||||||||
notification · current A wwpLeosSystemMemoryStatusNotification notification is sent whenever the system memory is below threshold limit. | |||||||||||||
| !wwpLeosImproperCmdInConfigLineString | 1.3.6.1.4.1.6141.2.60.12.2.0.4 | ||||||||||||
notification · current A wwpLeosImproperCmdInConfigLineString notif signifies that the SNMP entity, acting in an agent role, has detected that improper commands were found in the configuration file while processing the wwpLeosSystemConfigFileName. wwpLeosSystemConfigErrStr will specify the commands which failed with the line number. | |||||||||||||
| !wwpLeosSystemCpuUtilization5SecondStatusTrap | 1.3.6.1.4.1.6141.2.60.12.2.0.5 | ||||||||||||
notification · current The wwpLeosSystemCpuUtilizationStatusTrap is sent when the 5 second CPU utilization changes states. | |||||||||||||
| !wwpLeosSystemCpuUtilization10SecondStatusTrap | 1.3.6.1.4.1.6141.2.60.12.2.0.6 | ||||||||||||
notification · current The wwpLeosSystemCpuUtilization10SecondStatusTrap is sent when the 10 second CPU utilization changes states. | |||||||||||||
| !wwpLeosSystemCpuUtilization60SecondStatusTrap | 1.3.6.1.4.1.6141.2.60.12.2.0.7 | ||||||||||||
notification · current The wwpLeosSystemCpuUtilizationStatusTrap is sent when the 60 second CPU utilization changes states. | |||||||||||||
| !wwpLeosSystemCpu1MinLoadStatusTrap | 1.3.6.1.4.1.6141.2.60.12.2.0.8 | ||||||||||||
notification · current The wwpLeosSystemCpuLoadStatusTrap is sent when the CPU load over one minute changes states. | |||||||||||||
| !wwpLeosSystemCpu5MinLoadStatusTrap | 1.3.6.1.4.1.6141.2.60.12.2.0.9 | ||||||||||||
notification · current The wwpLeosSystemCpuLoadStatusTrap is sent when the CPU load over five minutes changes states. | |||||||||||||
| !wwpLeosSystemCpu15MinLoadStatusTrap | 1.3.6.1.4.1.6141.2.60.12.2.0.10 | ||||||||||||
notification · current The wwpLeosSystemCpuLoadStatusTrap is sent when the CPU load over fifteen minutes changes states. | |||||||||||||
| !wwpLeosSystemMemoryUtilizationStatusTrap | 1.3.6.1.4.1.6141.2.60.12.2.0.11 | ||||||||||||
notification · current The wwpLeosSystemMemoryUtilizationStatusTrap is sent when the memory utilization changes states. | |||||||||||||
| !wwpLeosSystemFileSystemUtilizationTmpStatusTrap | 1.3.6.1.4.1.6141.2.60.12.2.0.12 | ||||||||||||
notification · current The wwpLeosSystemFileSystemUtilizationTmpStatusTrap is sent when the usage of '/tmp/' changes states. | |||||||||||||
| !wwpLeosSystemFileSystemUtilizationSysfsStatusTrap | 1.3.6.1.4.1.6141.2.60.12.2.0.13 | ||||||||||||
notification · current The wwpLeosSystemFileSystemUtilizationSysfsStatusTrap is sent when the usage of '/mnt/sysfs/' changes states. | |||||||||||||
| !wwpLeosSystemFileSystemUtilizationXftpStatusTrap | 1.3.6.1.4.1.6141.2.60.12.2.0.14 | ||||||||||||
notification · current The wwpLeosSystemFileSystemUtilizationXftpStatusTrap is sent when the usage of '/mnt/xftp/' changes states. | |||||||||||||
| NwwpLeosSystemConfigMIBConformance | 1.3.6.1.4.1.6141.2.60.12.3 | ||||||||||||
| NwwpLeosSystemConfigCompliances | 1.3.6.1.4.1.6141.2.60.12.3.1 | ||||||||||||
| MwwpLeosDefaultGatewayCompliance | 1.3.6.1.4.1.6141.2.60.12.3.1.1 | ||||||||||||
compliance · current The compliance statement of wwpLeosSystemConfigAttr. | |||||||||||||
| MwwpLeosBackupGatewayCompliance | 1.3.6.1.4.1.6141.2.60.12.3.1.2 | ||||||||||||
compliance · current The compliance statement of wwpLeosSystemConfigAttr. | |||||||||||||
| NwwpLeosSystemConfigMIBGroups | 1.3.6.1.4.1.6141.2.60.12.3.2 | ||||||||||||
| GwwpLeosDefaultGatewayIPv6Group | 1.3.6.1.4.1.6141.2.60.12.3.2.1 | ||||||||||||
group · current System config default gateway objects for supporting IPv6. | |||||||||||||
| GwwpLeosBackupGatewayIPv6Group | 1.3.6.1.4.1.6141.2.60.12.3.2.2 | ||||||||||||
group · current System config backup gateway objects for supporting IPv6. | |||||||||||||
Textual conventions
FileNameOCTET STRING (SIZE (1..64))Display hint:
255aRepresents the textual convention which defines the name string and display hint
SystemClientAdminStateINTEGERdisable(2)enable(1)This textual convention enumerates the administration state of a system FTP/TFTP client.
SystemServerAdminStateINTEGERdisable(2)enable(1)This textual convention enumerates the administration state of a system FTP/SFTP/TFTP server.
Traps / Notifications
- wwpLeosImproperCmdInConfigFile
1.3.6.1.4.1.6141.2.60.12.2.0.1 - wwpLeosImproperCmdInConfigLineString
1.3.6.1.4.1.6141.2.60.12.2.0.4 - wwpLeosSystemCpu15MinLoadStatusTrap
1.3.6.1.4.1.6141.2.60.12.2.0.10 - wwpLeosSystemCpu1MinLoadStatusTrap
1.3.6.1.4.1.6141.2.60.12.2.0.8 - wwpLeosSystemCpu5MinLoadStatusTrap
1.3.6.1.4.1.6141.2.60.12.2.0.9 - wwpLeosSystemCpuUtilization10SecondStatusTrap
1.3.6.1.4.1.6141.2.60.12.2.0.6 - wwpLeosSystemCpuUtilization5SecondStatusTrap
1.3.6.1.4.1.6141.2.60.12.2.0.5 - wwpLeosSystemCpuUtilization60SecondStatusTrap
1.3.6.1.4.1.6141.2.60.12.2.0.7 - wwpLeosSystemFileSystemUtilizationSysfsStatusTrap
1.3.6.1.4.1.6141.2.60.12.2.0.13 - wwpLeosSystemFileSystemUtilizationTmpStatusTrap
1.3.6.1.4.1.6141.2.60.12.2.0.12 - wwpLeosSystemFileSystemUtilizationXftpStatusTrap
1.3.6.1.4.1.6141.2.60.12.2.0.14 - wwpLeosSystemMemoryStatusNotification
1.3.6.1.4.1.6141.2.60.12.2.0.3 - wwpLeosSystemMemoryUtilizationStatusTrap
1.3.6.1.4.1.6141.2.60.12.2.0.11 - wwpLeosSystemServiceModeChange
1.3.6.1.4.1.6141.2.60.12.2.0.2