CIENA-CES-RADIUS-CLIENT-MIB
Ciena CorporationThis module defines the objects used by the RADIUS client.
snmptranslate -m CIENA-CES-RADIUS-CLIENT-MIB -Tpsnmpwalk -v2c -c <community> -m CIENA-CES-RADIUS-CLIENT-MIB <host> 1.3.6.1.4.1.1271.2.3.3Imports
| CIENA-CES-MGMT-INTERFACE-MIB | PreferredSourceAddress |
|---|---|
| CIENA-SMI | cienaCesStatistics |
| CIENA-TC | CienaGlobalState |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IcienaCesRadiusClientMIB | 1.3.6.1.4.1.1271.2.3.3 | |||
identity This module defines the objects used by the RADIUS client. | ||||
| NcienaCesRadiusClientMIBObjects | 1.3.6.1.4.1.1271.2.3.3.1 | |||
| NcienaCesRadiusClient | 1.3.6.1.4.1.1271.2.3.3.1.1 | |||
| NcienaCesRadiusClientGlobal | 1.3.6.1.4.1.1271.2.3.3.1.1.1 | |||
| ScienaCesRadiusAdminState | 1.3.6.1.4.1.1271.2.3.3.1.1.1.1 | CienaGlobalState | RW | |
scalar · CienaGlobalState · read-write · current Setting this object administratively enables or disables the RADIUS client. | ||||
| ScienaCesRadiusOperState | 1.3.6.1.4.1.1271.2.3.3.1.1.1.2 | CienaGlobalState | RO | |
scalar · CienaGlobalState · read-only · current This object returns the operational state of the RADIUS client. | ||||
| ScienaCesRadiusClientTimeout | 1.3.6.1.4.1.1271.2.3.3.1.1.1.3 | Integer32 (1..30) | RW | deprecated |
scalar · Integer32 (1..30) · read-write · deprecated This is the time in seconds between re-transmissions to the RADIUS server.
| ||||
| ScienaCesRadiusClientRetries | 1.3.6.1.4.1.1271.2.3.3.1.1.1.4 | Integer32 (0..3) | RW | deprecated |
scalar · Integer32 (0..3) · read-write · deprecated Indicates the number of times the RADIUS server should be tried before giving up on the server. | ||||
| ScienaCesRadiusClientAuthKey | 1.3.6.1.4.1.1271.2.3.3.1.1.1.5 | RadiusString | RW | deprecated |
scalar · RadiusString · read-write · deprecated The authenticaion key to be used for RADIUS servers. Retrieving the value of this object via SNMP returns an empty string for security reasons. | ||||
| ScienaCesRadiusClientAuthKeyUnset | 1.3.6.1.4.1.1271.2.3.3.1.1.1.6 | TruthValue | RW | deprecated |
scalar · TruthValue · read-write · deprecated Setting this object to true clears the value of cienaCesRadiusClientAuthKey. Reading this object always returns a value of false. | ||||
| ScienaCesRadiusClientSearchType | 1.3.6.1.4.1.1271.2.3.3.1.1.1.7 | INTEGER | RW | deprecated |
scalar · INTEGER · read-write · deprecated This object sets the search type of the RADIUS client.
| ||||
| ScienaCesRadiusClientPreferredSourceAddress | 1.3.6.1.4.1.1271.2.3.3.1.1.1.8 | PreferredSourceAddress | RW | |
scalar · PreferredSourceAddress · read-write · current Changes the source of syslog messages to be from the default address or the loopback address. | ||||
| NcienaCesRadiusClientServer | 1.3.6.1.4.1.1271.2.3.3.1.1.2 | |||
| TcienaCesRadiusClientServerTable | 1.3.6.1.4.1.1271.2.3.3.1.1.2.1 | NA | deprecated | |
table · not-accessible · deprecated Lists the possible RADIUS servers. While creating an entry, cienaCesRadiusRadiusClientServerStatus and cienaCesRadiusClientServerAddr must be specified. The SNMP multiple set operation must be used to create an entry. | ||||
| RcienaCesRadiusClientServerEntry | 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1 | NA | deprecated | |
| CcienaCesRadiusClientServerIndex | 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.1 | Integer32 (1..8) | NA | deprecated |
column · Integer32 (1..8) · not-accessible · deprecated Specifies the index of this table. | ||||
| CcienaCesRadiusClientServerAddr | 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.2 | DisplayString | RC | deprecated |
column · DisplayString · read-create · deprecated Host name or IP address of the RADIUS server. | ||||
| CcienaCesRadiusClientServerResolvedAddr | 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.3 | IpAddress | RO | deprecated |
column · IpAddress · read-only · deprecated Specifies the resolved IP address if cienaCesRadiusClientServerAddr is set to host name. If cienaCesRadiusClientServerAddr is set to IP address, then cienaCesRadiusClientServerResolvedAddr contains the same information as cienaCesRadiusClientServerAddr. | ||||
| CcienaCesRadiusClientServerPriority | 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.4 | Integer32 | RC | deprecated |
column · Integer32 · read-create · deprecated Specifies the priority of RADIUS servers configured on the device. | ||||
| CcienaCesRadiusClientServerAuthPort | 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.5 | Integer32 (1..65535) | RC | deprecated |
column · Integer32 (1..65535) · read-create · deprecated The destination UDP port number to which RADIUS messages should be sent. The RADIUS server is not used for authentication if this port number is 0. | ||||
| CcienaCesRadiusClientServerRoundTripTime | 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.6 | TimeTicks | RO | deprecated |
column · TimeTicks · read-only · deprecated The time interval (in hundredths of a second) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS authentication server. | ||||
| CcienaCesRadiusClientServerAccessRequests | 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.7 | Counter32 | RO | deprecated |
column · Counter32 · read-only · deprecated The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions. | ||||
| CcienaCesRadiusClientServerAccessRetransmissions | 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.8 | Counter32 | RO | deprecated |
column · Counter32 · read-only · deprecated The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server. | ||||
| CcienaCesRadiusClientServerAccessAccepts | 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.9 | Counter32 | RO | deprecated |
column · Counter32 · read-only · deprecated The number of RADIUS Access-Accept packets (valid or invalid) received from this server. | ||||
| CcienaCesRadiusClientServerAccessRejects | 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.10 | Counter32 | RO | deprecated |
column · Counter32 · read-only · deprecated The number of RADIUS Access-Reject packets (valid or invalid) received from this server. | ||||
| CcienaCesRadiusClientServerAccessChallenges | 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.11 | Counter32 | RO | deprecated |
column · Counter32 · read-only · deprecated The number of RADIUS Access-Challenge packets (valid or invalid) received from this server. | ||||
| CcienaCesRadiusClientServerMalformedAccessResponses | 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.12 | Counter32 | RO | deprecated |
column · Counter32 · read-only · deprecated The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators or signature attributes or unknown types are not included as malformed access responses. | ||||
| CcienaCesRadiusClientServerBadAuthenticators | 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.13 | Counter32 | RO | deprecated |
column · Counter32 · read-only · deprecated The number of RADIUS Access-Response packets containing invalid authenticators or signature attributes received from this server. | ||||
| CcienaCesRadiusClientServerPendingRequests | 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.14 | Gauge32 | RO | deprecated |
column · Gauge32 · read-only · deprecated The number of RADIUS Access-Request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an Access-Request is sent and decremented due to receipt of an Access-Accept, Access-Reject, Access-Challenge, a timeout, or retransmission. | ||||
| CcienaCesRadiusClientServerTimeouts | 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.15 | Counter32 | RO | deprecated |
column · Counter32 · read-only · deprecated The number of authentication timeouts to this server. After a timeout the client may retry sending to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a request as well as a timeout. | ||||
| CcienaCesRadiusClientServerUnknownTypes | 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.16 | Counter32 | RO | deprecated |
column · Counter32 · read-only · deprecated The number of RADIUS packets of unknown type which were received from this server on the authentication port. | ||||
| CcienaCesRadiusClientServerPacketsDropped | 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.17 | Counter32 | RO | deprecated |
column · Counter32 · read-only · deprecated The number of RADIUS packets which were received from this server on the authentication port and dropped for some other reason. | ||||
| CcienaCesRadiusClientServerApplication | 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.18 | INTEGER | RC | deprecated |
column · INTEGER · read-create · deprecated This object specifies how the RADIUS server should be used for authentication.
| ||||
| CcienaCesRadiusClientServerStatus | 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.19 | RowStatus | RC | deprecated |
column · RowStatus · read-create · deprecated To create a row in this table, a manager must set this object to createAndGo(4). To create an entry, cienaCesRadiusClientServerStatus and cienaCesRadiusClientServerAddr must be specified. The SNMP multiple set operation must be used to create the entry. To disable a RADIUS server, set the cienaCesRadiusClientServerStatus object to 'notInService' state. | ||||
| NcienaCesRadiusUserLogin | 1.3.6.1.4.1.1271.2.3.3.1.1.3 | |||
| NcienaCesRadiusUserLoginGlobal | 1.3.6.1.4.1.1271.2.3.3.1.1.3.1 | |||
| ScienaCesRadiusUserLoginTimeout | 1.3.6.1.4.1.1271.2.3.3.1.1.3.1.1 | Integer32 (1..30) | RW | |
scalar · Integer32 (1..30) · read-write · current This is the time in seconds between re-transmissions to the RADIUS server.
| ||||
| ScienaCesRadiusUserLoginRetries | 1.3.6.1.4.1.1271.2.3.3.1.1.3.1.2 | Integer32 (0..3) | RW | |
scalar · Integer32 (0..3) · read-write · current Indicates the number of times the RADIUS server should be tried before giving up on the server. | ||||
| ScienaCesRadiusUserLoginAuthKey | 1.3.6.1.4.1.1271.2.3.3.1.1.3.1.3 | RadiusString | RW | |
scalar · RadiusString · read-write · current The authenticaion key to be used for RADIUS servers. Retrieving the value of this object via SNMP returns an empty string for security reasons. | ||||
| ScienaCesRadiusUserLoginSearchType | 1.3.6.1.4.1.1271.2.3.3.1.1.3.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object sets the search type of the RADIUS client.
| ||||
| ScienaCesRadiusUserLoginAuthSecret | 1.3.6.1.4.1.1271.2.3.3.1.1.3.1.5 | OCTET STRING (SIZE (0..259)) | RW | |
scalar · OCTET STRING (SIZE (0..259)) · read-write · current Used to set the pre-encrypted secret for user-login auth. When read, this object returns the encrypted secret. | ||||
| TcienaCesRadiusUserLoginTable | 1.3.6.1.4.1.1271.2.3.3.1.1.3.2 | NA | ||
table · not-accessible · current Lists the possible RADIUS user login servers. While creating an entry, cienaCesRadiusUserLoginStatus and cienaCesRadiusUserLoginAddr must be specified. The SNMP multiple set operation must be used to create an entry. | ||||
| RcienaCesRadiusUserLoginEntry | 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1 | NA | ||
| CcienaCesRadiusUserLoginIndex | 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.1 | Integer32 (1..8) | NA | |
column · Integer32 (1..8) · not-accessible · current Specifies the index of this table. | ||||
| CcienaCesRadiusUserLoginResolvedInetAddrType | 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.2 | InetAddressType | RO | |
column · InetAddressType · read-only · current Specifies the resolved IP address type. This OID is used in conjunction with cienaCesRadiusUserLoginInetAddrress. When set to : ipv4 : cienaCesRadiusUserLoginResolvedInetAddress should be compliant with InetAddressIPv4 ipv6 : cienaCesRadiusUserLoginResolvedInetAddress should be compliant with InetAddressIPv6 | ||||
| CcienaCesRadiusUserLoginResolvedInetAddress | 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.3 | InetAddress | RO | |
column · InetAddress · read-only · current Specifies the resolved IP address if cienaCesRadiusUserLoginAddr is set to host name. If cienaCesRadiusUserLoginAddr is set to ip address then cienaCesRadiusUserLoginResolvedInetAddress will contain same information as cienaCesRadiusUserLoginAddr. This OID should be used in conjuction with cienaCesRadiusUserLoginResolvedInetAddrType. | ||||
| CcienaCesRadiusUserLoginAddr | 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.4 | DisplayString | RC | |
column · DisplayString · read-create · current Host name or IP address of the RADIUS server. | ||||
| CcienaCesRadiusUserLoginPriority | 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current Specifies the priority of RADIUS servers configured on the device. | ||||
| CcienaCesRadiusUserLoginAuthPort | 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.6 | Integer32 (1..65535) | RC | |
column · Integer32 (1..65535) · read-create · current The destination UDP port number to which RADIUS messages should be sent. The RADIUS server is not used for authentication if this port number is 0. | ||||
| CcienaCesRadiusUserLoginClearStatistics | 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.7 | TruthValue | RW | |
column · TruthValue · read-write · current This object clears the statistics for a server. | ||||
| CcienaCesRadiusUserLoginRoundTripTime | 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.8 | TimeTicks | RO | |
column · TimeTicks · read-only · current The time interval (in hundredths of a second) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS authentication server. | ||||
| CcienaCesRadiusUserLoginRequests | 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions. | ||||
| CcienaCesRadiusUserLoginRetransmissions | 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server. | ||||
| CcienaCesRadiusUserLoginAccessAccepts | 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Accept packets (valid or invalid) received from this server. | ||||
| CcienaCesRadiusUserLoginAccessRejects | 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Reject packets (valid or invalid) received from this server. | ||||
| CcienaCesRadiusUserLoginAccessChallenges | 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Challenge packets (valid or invalid) received from this server. | ||||
| CcienaCesRadiusUserLoginAccountingResponses | 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Accounting-Response packets (valid or invalid) received from this server. | ||||
| CcienaCesRadiusUserLoginMalformedResponses | 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators or signature attributes or unknown types are not included as malformed access responses. | ||||
| CcienaCesRadiusUserLoginBadAuthenticators | 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Response packets containing invalid authenticators or signature attributes received from this server. | ||||
| CcienaCesRadiusUserLoginTimeouts | 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The number of authentication timeouts to this server. After a timeout the client may retry sending to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a request as well as a timeout. | ||||
| CcienaCesRadiusUserLoginUnknownTypes | 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS packets of unknown type which were received from this server on the authentication port. | ||||
| CcienaCesRadiusUserLoginPacketsDropped | 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS packets which were received from this server on the authentication port and dropped for some other reason. | ||||
| CcienaCesRadiusUserLoginStatus | 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.20 | RowStatus | RC | |
column · RowStatus · read-create · current To create a row in this table, a manager must specify cienaCesRadiusUserLoginAddr and set this object to createAndGo(4). The RADIUS server will initially be administratively disabled. To administratively enable the RADIUS server, set this object to active(1). To administratively disable the RADIUS server set this object to notInService(2). | ||||
| NcienaCesRadiusDot1xAuth | 1.3.6.1.4.1.1271.2.3.3.1.1.4 | |||
| NcienaCesRadiusDot1xAuthGlobal | 1.3.6.1.4.1.1271.2.3.3.1.1.4.1 | |||
| ScienaCesRadiusDot1xAuthTimeout | 1.3.6.1.4.1.1271.2.3.3.1.1.4.1.1 | Integer32 (1..30) | RW | |
scalar · Integer32 (1..30) · read-write · current This is the time in seconds between re-transmissions to the RADIUS server.
| ||||
| ScienaCesRadiusDot1xAuthRetries | 1.3.6.1.4.1.1271.2.3.3.1.1.4.1.2 | Integer32 (0..3) | RW | |
scalar · Integer32 (0..3) · read-write · current Indicates the number of times the RADIUS server should be tried before giving up on the server. | ||||
| ScienaCesRadiusDot1xAuthAuthKey | 1.3.6.1.4.1.1271.2.3.3.1.1.4.1.3 | RadiusString | RW | |
scalar · RadiusString · read-write · current The authenticaion key to be used for RADIUS servers. Retrieving the value of this object via SNMP returns an empty string for security reasons. | ||||
| ScienaCesRadiusDot1xAuthSearchType | 1.3.6.1.4.1.1271.2.3.3.1.1.4.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object sets the search type of the RADIUS client.
| ||||
| ScienaCesRadiusDot1xAuthGreylistTimeout | 1.3.6.1.4.1.1271.2.3.3.1.1.4.1.5 | Unsigned32 (60..14400) | RW | |
scalar · Unsigned32 (60..14400) · read-write · current The max greylist timeout for a RADIUS Dot1x Auth server between 1 minute and 4 hours.
| ||||
| ScienaCesRadiusDot1xAuthAuthSecret | 1.3.6.1.4.1.1271.2.3.3.1.1.4.1.6 | OCTET STRING (SIZE (0..259)) | RW | |
scalar · OCTET STRING (SIZE (0..259)) · read-write · current Used to set the pre-encrypted secret for dot1x auth. When read, this object returns the encrypted secret. | ||||
| TcienaCesRadiusDot1xAuthTable | 1.3.6.1.4.1.1271.2.3.3.1.1.4.2 | NA | ||
table · not-accessible · current Lists the possible RADIUS Dot1x auth servers. While creating an entry, cienaCesRadiusDot1xAuthStatus and cienaCesRadiusDot1xAuthAddr must be specified. The SNMP multiple set operation must be used to create an entry. | ||||
| RcienaCesRadiusDot1xAuthEntry | 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1 | NA | ||
| CcienaCesRadiusDot1xAuthIndex | 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.1 | Integer32 (1..8) | NA | |
column · Integer32 (1..8) · not-accessible · current Specifies the index of this table. | ||||
| CcienaCesRadiusDot1xAuthResolvedInetAddrType | 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.2 | InetAddressType | RO | |
column · InetAddressType · read-only · current Specifies the resolved IP address type. This OID is used in conjunction with cienaCesRadiusDot1xAuthInetAddrress. When set to : ipv4 : cienaCesRadiusDot1xAuthResolvedInetAddress should be compliant with InetAddressIPv4 ipv6 : cienaCesRadiusDot1xAuthResolvedInetAddress should be compliant with InetAddressIPv6 | ||||
| CcienaCesRadiusDot1xAuthResolvedInetAddress | 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.3 | InetAddress | RO | |
column · InetAddress · read-only · current Specifies the resolved IP address if cienaCesRadiusDot1xAuthAddr is set to host name. If cienaCesRadiusDot1xAuthAddr is set to ip address then cienaCesRadiusDot1xAuthResolvedInetAddress will contain same information as cienaCesRadiusDot1xAuthAddr. This OID should be used in conjuction with cienaCesRadiusDot1xAuthResolvedInetAddrType. | ||||
| CcienaCesRadiusDot1xAuthAddr | 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.4 | DisplayString | RC | |
column · DisplayString · read-create · current Host name or IP address of the RADIUS server. | ||||
| CcienaCesRadiusDot1xAuthPriority | 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current Specifies the priority of RADIUS servers configured on the device. | ||||
| CcienaCesRadiusDot1xAuthAuthPort | 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.6 | Integer32 (1..65535) | RC | |
column · Integer32 (1..65535) · read-create · current The destination UDP port number to which RADIUS messages should be sent. The RADIUS server is not used for authentication if this port number is 0. | ||||
| CcienaCesRadiusDot1xAuthClearStatistics | 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.7 | TruthValue | RW | |
column · TruthValue · read-write · current This object clears the statistics for a server. | ||||
| CcienaCesRadiusDot1xAuthGreylistTimeRemaining | 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.8 | Unsigned32 (0..14400) | RO | |
column · Unsigned32 (0..14400) · read-only · current Reflects the remaining time before the server removed from the greylist. A value of '0' (zero) indicates the current server is not greylisted
| ||||
| CcienaCesRadiusDot1xAuthRoundTripTime | 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.9 | TimeTicks | RO | |
column · TimeTicks · read-only · current The time interval (in hundredths of a second) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS authentication server. | ||||
| CcienaCesRadiusDot1xAuthRequests | 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions. | ||||
| CcienaCesRadiusDot1xAuthRetransmissions | 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server. | ||||
| CcienaCesRadiusDot1xAuthAccessAccepts | 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Accept packets (valid or invalid) received from this server. | ||||
| CcienaCesRadiusDot1xAuthAccessRejects | 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Reject packets (valid or invalid) received from this server. | ||||
| CcienaCesRadiusDot1xAuthAccessChallenges | 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Challenge packets (valid or invalid) received from this server. | ||||
| CcienaCesRadiusDot1xAuthAccountingResponses | 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Accounting-Response packets (valid or invalid) received from this server. | ||||
| CcienaCesRadiusDot1xAuthMalformedResponses | 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators or signature attributes or unknown types are not included as malformed access responses. | ||||
| CcienaCesRadiusDot1xAuthBadAuthenticators | 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Response packets containing invalid authenticators or signature attributes received from this server. | ||||
| CcienaCesRadiusDot1xAuthTimeouts | 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current The number of authentication timeouts to this server. After a timeout the client may retry sending to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a request as well as a timeout. | ||||
| CcienaCesRadiusDot1xAuthUnknownTypes | 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS packets of unknown type which were received from this server on the authentication port. | ||||
| CcienaCesRadiusDot1xAuthPacketsDropped | 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.20 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS packets which were received from this server on the authentication port and dropped for some other reason. | ||||
| CcienaCesRadiusDot1xAuthStatus | 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.21 | RowStatus | RC | |
column · RowStatus · read-create · current To create a row in this table, a manager must specify cienaCesRadiusDot1xAuthAddr and set this object to createAndGo(4). The RADIUS server will initially be administratively disabled. To administratively enable the RADIUS server, set this object to active(1). To administratively disable the RADIUS server set this object to notInService(2). | ||||
| NcienaCesRadiusDot1xAcct | 1.3.6.1.4.1.1271.2.3.3.1.1.5 | |||
| NcienaCesRadiusDot1xAcctGlobal | 1.3.6.1.4.1.1271.2.3.3.1.1.5.1 | |||
| ScienaCesRadiusDot1xAcctAdminState | 1.3.6.1.4.1.1271.2.3.3.1.1.5.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this object administratively enables/disables the RADIUS Dot1x accounting client on the device.
| ||||
| ScienaCesRadiusDot1xAcctTimeout | 1.3.6.1.4.1.1271.2.3.3.1.1.5.1.2 | Integer32 (1..30) | RW | |
scalar · Integer32 (1..30) · read-write · current This is the time in seconds between re-transmissions to the RADIUS server.
| ||||
| ScienaCesRadiusDot1xAcctRetries | 1.3.6.1.4.1.1271.2.3.3.1.1.5.1.3 | Integer32 (0..3) | RW | |
scalar · Integer32 (0..3) · read-write · current Indicates the number of times the RADIUS server should be tried before giving up on the server. | ||||
| ScienaCesRadiusDot1xAcctAuthKey | 1.3.6.1.4.1.1271.2.3.3.1.1.5.1.4 | RadiusString | RW | |
scalar · RadiusString · read-write · current The authenticaion key to be used for RADIUS servers. Retrieving the value of this object via SNMP returns an empty string for security reasons. | ||||
| ScienaCesRadiusDot1xAcctSearchType | 1.3.6.1.4.1.1271.2.3.3.1.1.5.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object sets the search type of the RADIUS client.
| ||||
| ScienaCesRadiusDot1xAcctGreylistTimeout | 1.3.6.1.4.1.1271.2.3.3.1.1.5.1.6 | Unsigned32 (60..14400) | RW | |
scalar · Unsigned32 (60..14400) · read-write · current The max greylist timeout for a RADIUS Dot1x Acct server between 1 minute and 4 hours.
| ||||
| ScienaCesRadiusDot1xAcctAuthSecret | 1.3.6.1.4.1.1271.2.3.3.1.1.5.1.7 | OCTET STRING (SIZE (0..259)) | RW | |
scalar · OCTET STRING (SIZE (0..259)) · read-write · current Used to set the pre-encrypted secret for dot1x auth acct. When read, this object returns the encrypted secret. | ||||
| TcienaCesRadiusDot1xAcctTable | 1.3.6.1.4.1.1271.2.3.3.1.1.5.2 | NA | ||
table · not-accessible · current Lists the possible RADIUS Dot1x Acct servers. While creating an entry, cienaCesRadiusDot1xAcctStatus and cienaCesRadiusDot1xAcctAddr must be specified. The SNMP multiple set operation must be used to create an entry. | ||||
| RcienaCesRadiusDot1xAcctEntry | 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1 | NA | ||
| CcienaCesRadiusDot1xAcctIndex | 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.1 | Integer32 (1..8) | NA | |
column · Integer32 (1..8) · not-accessible · current Specifies the index of this table. | ||||
| CcienaCesRadiusDot1xAcctResolvedInetAddrType | 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.2 | InetAddressType | RO | |
column · InetAddressType · read-only · current Specifies the resolved IP address type. This OID is used in conjunction with cienaCesRadiusDot1xAcctInetAddrress. When set to : ipv4 : cienaCesRadiusDot1xAcctResolvedInetAddress should be compliant with InetAddressIPv4 ipv6 : cienaCesRadiusDot1xAcctResolvedInetAddress should be compliant with InetAddressIPv6 | ||||
| CcienaCesRadiusDot1xAcctResolvedInetAddress | 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.3 | InetAddress | RO | |
column · InetAddress · read-only · current Specifies the resolved IP address if cienaCesRadiusDot1xAcctAddr is set to host name. If cienaCesRadiusDot1xAcctAddr is set to ip address then cienaCesRadiusDot1xAcctResolvedInetAddress will contain same information as cienaCesRadiusDot1xAcctAddr. This OID should be used in conjuction with cienaCesRadiusDot1xAcctResolvedInetAddrType. | ||||
| CcienaCesRadiusDot1xAcctAddr | 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.4 | DisplayString | RC | |
column · DisplayString · read-create · current Host name or IP address of the RADIUS server. | ||||
| CcienaCesRadiusDot1xAcctPriority | 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current Specifies the priority of RADIUS servers configured on the device. | ||||
| CcienaCesRadiusDot1xAcctAuthPort | 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.6 | Integer32 (1..65535) | RC | |
column · Integer32 (1..65535) · read-create · current The destination UDP port number to which RADIUS messages should be sent. The RADIUS server is not used for authentication if this port number is 0. | ||||
| CcienaCesRadiusDot1xAcctClearStatistics | 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.7 | TruthValue | RW | |
column · TruthValue · read-write · current This object clears the statistics for a server. | ||||
| CcienaCesRadiusDot1xAcctGreylistTimeRemaining | 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.8 | Unsigned32 (0..14400) | RO | |
column · Unsigned32 (0..14400) · read-only · current Reflects the remaining time before the server removed from the greylist. A value of '0' (zero) indicates the current server is not greylisted
| ||||
| CcienaCesRadiusDot1xAcctRoundTripTime | 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.9 | TimeTicks | RO | |
column · TimeTicks · read-only · current The time interval (in hundredths of a second) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS authentication server. | ||||
| CcienaCesRadiusDot1xAcctRequests | 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions. | ||||
| CcienaCesRadiusDot1xAcctRetransmissions | 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server. | ||||
| CcienaCesRadiusDot1xAcctAccessAccepts | 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Accept packets (valid or invalid) received from this server. | ||||
| CcienaCesRadiusDot1xAcctAccessRejects | 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Reject packets (valid or invalid) received from this server. | ||||
| CcienaCesRadiusDot1xAcctAccessChallenges | 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Challenge packets (valid or invalid) received from this server. | ||||
| CcienaCesRadiusDot1xAcctAccountingResponses | 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Accounting-Response packets (valid or invalid) received from this server. | ||||
| CcienaCesRadiusDot1xAcctMalformedResponses | 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators or signature attributes or unknown types are not included as malformed access responses. | ||||
| CcienaCesRadiusDot1xAcctBadAuthenticators | 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Response packets containing invalid authenticators or signature attributes received from this server. | ||||
| CcienaCesRadiusDot1xAcctTimeouts | 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current The number of authentication timeouts to this server. After a timeout the client may retry sending to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a request as well as a timeout. | ||||
| CcienaCesRadiusDot1xAcctUnknownTypes | 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS packets of unknown type which were received from this server on the authentication port. | ||||
| CcienaCesRadiusDot1xAcctPacketsDropped | 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.20 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS packets which were received from this server on the authentication port and dropped for some other reason. | ||||
| CcienaCesRadiusDot1xAcctStatus | 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.21 | RowStatus | RC | |
column · RowStatus · read-create · current To create a row in this table, a manager must specify cienaCesRadiusDot1xAcctAddr and set this object to createAndGo(4). The RADIUS server will initially be administratively disabled. To administratively enable the RADIUS server, set this object to active(1). To administratively disable the RADIUS server set this object to notInService(2). | ||||
| NcienaCesRadiusUserLoginAcct | 1.3.6.1.4.1.1271.2.3.3.1.1.6 | |||
| NcienaCesRadiusUserLoginAcctGlobal | 1.3.6.1.4.1.1271.2.3.3.1.1.6.1 | |||
| ScienaCesRadiusUserLoginAcctAdminState | 1.3.6.1.4.1.1271.2.3.3.1.1.6.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this object administratively enables/disables the RADIUS user login accounting client on the device.
| ||||
| ScienaCesRadiusUserLoginAcctTimeout | 1.3.6.1.4.1.1271.2.3.3.1.1.6.1.2 | Integer32 (1..30) | RW | |
scalar · Integer32 (1..30) · read-write · current This is the time in seconds between re-transmissions to the RADIUS server.
| ||||
| ScienaCesRadiusUserLoginAcctRetries | 1.3.6.1.4.1.1271.2.3.3.1.1.6.1.3 | Integer32 (0..3) | RW | |
scalar · Integer32 (0..3) · read-write · current Indicates the number of times the RADIUS server should be tried before giving up on the server. | ||||
| ScienaCesRadiusUserLoginAcctAuthKey | 1.3.6.1.4.1.1271.2.3.3.1.1.6.1.4 | RadiusString | RW | |
scalar · RadiusString · read-write · current The authenticaion key to be used for RADIUS servers. Retrieving the value of this object via SNMP returns an empty string for security reasons. | ||||
| ScienaCesRadiusUserLoginAcctSearchType | 1.3.6.1.4.1.1271.2.3.3.1.1.6.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object sets the search type of the RADIUS client.
| ||||
| ScienaCesRadiusUserLoginAcctAuthSecret | 1.3.6.1.4.1.1271.2.3.3.1.1.6.1.6 | OCTET STRING (SIZE (0..259)) | RW | |
scalar · OCTET STRING (SIZE (0..259)) · read-write · current Used to set the pre-encrypted secret for user-login accounting auth. When read, this object returns the encrypted secret. | ||||
| TcienaCesRadiusUserLoginAcctTable | 1.3.6.1.4.1.1271.2.3.3.1.1.6.2 | NA | ||
table · not-accessible · current Lists the possible RADIUS user login servers. While creating an entry, cienaCesRadiusUserLoginAcctStatus and cienaCesRadiusUserLoginAcctAddr must be specified. The SNMP multiple set operation must be used to create an entry. | ||||
| RcienaCesRadiusUserLoginAcctEntry | 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1 | NA | ||
| CcienaCesRadiusUserLoginAcctIndex | 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.1 | Integer32 (1..8) | NA | |
column · Integer32 (1..8) · not-accessible · current Specifies the index of this table. | ||||
| CcienaCesRadiusUserLoginAcctResolvedInetAddrType | 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.2 | InetAddressType | RO | |
column · InetAddressType · read-only · current Specifies the resolved IP address type. This OID is used in conjunction with cienaCesRadiusUserLoginAcctInetAddrress. When set to : ipv4 : cienaCesRadiusUserLoginAcctResolvedInetAddress should be compliant with InetAddressIPv4 ipv6 : cienaCesRadiusUserLoginAcctResolvedInetAddress should be compliant with InetAddressIPv6 | ||||
| CcienaCesRadiusUserLoginAcctResolvedInetAddress | 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.3 | InetAddress | RO | |
column · InetAddress · read-only · current Specifies the resolved IP address if cienaCesRadiusUserLoginAcctAddr is set to host name. If cienaCesRadiusUserLoginAcctAddr is set to ip address then cienaCesRadiusUserLoginAcctResolvedInetAddress will contain same information as cienaCesRadiusUserLoginAcctAddr. This OID should be used in conjuction with cienaCesRadiusUserLoginAcctResolvedInetAddrType. | ||||
| CcienaCesRadiusUserLoginAcctAddr | 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.4 | DisplayString | RC | |
column · DisplayString · read-create · current Host name or IP address of the RADIUS server. | ||||
| CcienaCesRadiusUserLoginAcctPriority | 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current Specifies the priority of RADIUS servers configured on the device. | ||||
| CcienaCesRadiusUserLoginAcctAuthPort | 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.6 | Integer32 (1..65535) | RC | |
column · Integer32 (1..65535) · read-create · current The destination UDP port number to which RADIUS messages should be sent. The RADIUS server is not used for authentication if this port number is 0. | ||||
| CcienaCesRadiusUserLoginAcctClearStatistics | 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.7 | TruthValue | RW | |
column · TruthValue · read-write · current This object clears the statistics for a server. | ||||
| CcienaCesRadiusUserLoginAcctRoundTripTime | 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.8 | TimeTicks | RO | |
column · TimeTicks · read-only · current The time interval (in hundredths of a second) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS authentication server. | ||||
| CcienaCesRadiusUserLoginAcctRequests | 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions. | ||||
| CcienaCesRadiusUserLoginAcctRetransmissions | 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server. | ||||
| CcienaCesRadiusUserLoginAcctAccessAccepts | 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Accept packets (valid or invalid) received from this server. | ||||
| CcienaCesRadiusUserLoginAcctAccessRejects | 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Reject packets (valid or invalid) received from this server. | ||||
| CcienaCesRadiusUserLoginAcctAccessChallenges | 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Challenge packets (valid or invalid) received from this server. | ||||
| CcienaCesRadiusUserLoginAcctAccountingResponses | 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Accounting-Response packets (valid or invalid) received from this server. | ||||
| CcienaCesRadiusUserLoginAcctMalformedResponses | 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators or signature attributes or unknown types are not included as malformed access responses. | ||||
| CcienaCesRadiusUserLoginAcctBadAuthenticators | 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS Access-Response packets containing invalid authenticators or signature attributes received from this server. | ||||
| CcienaCesRadiusUserLoginAcctTimeouts | 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The number of authentication timeouts to this server. After a timeout the client may retry sending to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a request as well as a timeout. | ||||
| CcienaCesRadiusUserLoginAcctUnknownTypes | 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS packets of unknown type which were received from this server on the authentication port. | ||||
| CcienaCesRadiusUserLoginAcctPacketsDropped | 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current The number of RADIUS packets which were received from this server on the authentication port and dropped for some other reason. | ||||
| CcienaCesRadiusUserLoginAcctStatus | 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.20 | RowStatus | RC | |
column · RowStatus · read-create · current To create a row in this table, a manager must specify cienaCesRadiusUserLoginAcctAddr and set this object to createAndGo(4). The RADIUS server will initially be administratively disabled. To administratively enable the RADIUS server, set this object to active(1). To administratively disable the RADIUS server set this object to notInService(2). | ||||
| NcienaCesRadiusClientMIBNotificationPrefix | 1.3.6.1.4.1.1271.2.3.3.2 | |||
| NcienaCesRadiusClientMIBNotifications | 1.3.6.1.4.1.1271.2.3.3.2.0 | |||
| NcienaCesRadiusClientMIBConformance | 1.3.6.1.4.1.1271.2.3.3.3 | |||
| NcienaCesRadiusClientMIBCompliances | 1.3.6.1.4.1.1271.2.3.3.3.1 | |||
| NcienaCesRadiusClientMIBGroups | 1.3.6.1.4.1.1271.2.3.3.3.2 | |||
Textual conventions
RadiusStringOCTET STRING (SIZE (0 | 8..64))Display hint:
255aUsed to represent the RADIUS authentication string.