CIENA-CES-CFM-MIB
Ciena CorporationThis module defines the CFM configuration and notification objects.
snmptranslate -m CIENA-CES-CFM-MIB -Tpsnmpwalk -v2c -c <community> -m CIENA-CES-CFM-MIB <host> 1.3.6.1.4.1.1271.2.1.4Imports
| CIENA-GLOBAL-MIB | cienaGlobalMacAddress, cienaGlobalSeverity |
|---|---|
| CIENA-SMI | cienaCesConfig, cienaCesNotifications, cienaCesStatistics |
| CIENA-TC | CienaGlobalState, CienaMacAddress, CienaStatsClear |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IcienaCesCfmMIB | 1.3.6.1.4.1.1271.2.1.4 | |||
identity This module defines the CFM configuration and notification objects. | ||||
| NcienaCesCfmMIBObjects | 1.3.6.1.4.1.1271.2.1.4.1 | |||
| NcienaCesCfmService | 1.3.6.1.4.1.1271.2.1.4.1.2 | |||
| TcienaCesCfmServiceTable | 1.3.6.1.4.1.1271.2.1.4.1.2.1 | NA | ||
table · not-accessible · current The (conceptual) table listing the configuration parameters for the CFM service table. | ||||
| RcienaCesCfmServiceEntry | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the cienaCesCfmServiceTable. | ||||
| CcienaCesCfmServiceIndex | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current A unique identifier for a CFM domain entry. | ||||
| CcienaCesCfmServiceType | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to specify the service type. The meaning of cienaCesCfmServiceValue depends on the value of this MIB object. This MIB object along with cienaCesCfmServiceValue must be unique for each entry in this table.
| ||||
| CcienaCesCfmServiceValue | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to specify the service value. The meaning of this object depends on the value of cienaCesCfmServiceType. This MIB object along with cienaCesCfmServiceType must be unique for each entry in this table. | ||||
| CcienaCesCfmServiceAdminState | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.4 | CienaGlobalState | RO | |
column · CienaGlobalState · read-only · current This object indicates the administrative state of CFM for this service type. | ||||
| CcienaCesCfmServiceOperState | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.5 | CienaGlobalState | RO | |
column · CienaGlobalState · read-only · current This object indicates the operational state of CFM for this service type. | ||||
| CcienaCesCfmServiceName | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current This MIB object indicates the CFM service name. | ||||
| CcienaCesCfmServiceMdLevel | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current This MIB object indicates the maintenance domain level associated with the CFM service. | ||||
| CcienaCesCfmServiceFaultState | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.8 | CienaGlobalState | RO | |
column · CienaGlobalState · read-only · current When this object's state is disabled it suppresses all the corresponding CFM service related traps. | ||||
| CcienaCesCfmServiceAlarmTime | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current This MIB object indicates the time interval that a service fault detected by cienaCesCfmServiceType must be present prior to triggering a fault alarm.
| ||||
| CcienaCesCfmServiceCCMInterval | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current This MIB object identifies the CCM transmission interval index for the service specified by cienaCesCfmServiceType. This determines the frequency at which CCMs are transmitted. The length of the interval increases exponentially with the index value. When the interval is zero (0), CCM transmission is disabled from all MEPs in the MA.
| ||||
| CcienaCesCfmServiceResetTime | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current This MIB object indicates the time interval during which no service faults can be detected before the service will reset a fault alarm.
| ||||
| CcienaCesCfmServiceLastFaultCCM | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.12 | CfmDisplayString | RO | |
column · CfmDisplayString · read-only · current This MIB object shows the last received CCM fault. | ||||
| CcienaCesCfmServiceRMEPFailureFlag | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.13 | TruthValue | RO | |
column · TruthValue · read-only · current This MIB object indicates whether the RMEP failure flag is set. | ||||
| CcienaCesCfmServiceCCMErrorFlag | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.14 | TruthValue | RO | |
column · TruthValue · read-only · current This MIB object indicates whether the CCM error flag is set. | ||||
| CcienaCesCfmServiceCrossConnectErrorFlag | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.15 | TruthValue | RO | |
column · TruthValue · read-only · current This MIB object indicates whether the cross-connect error flag is set. | ||||
| CcienaCesCfmServiceNumMEP | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current This MIB object shows the total number of MEPs. | ||||
| CcienaCesCfmServiceNumRemoteMEP | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current This MIB object shows the total number of remote MEPs. | ||||
| CcienaCesCfmServiceNumActiveMEP | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current This MIB object shows the number of active MEPs. | ||||
| CcienaCesCfmServiceNextMepId | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.19 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This MIB object indicates the next MEP ID for the given service. | ||||
| CcienaCesCfmServiceAlarmPriority | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.20 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This MIB object indicates the alarm priority for a given service. The value ranges from 1 to 5. The value 1-5 represent the priority according to faults: 1 --> RDI, 2 --> Mac Status, 3 --> Remote Mep, 4 --> Error Ccm, 5 --> Xcon Ccm. | ||||
| CcienaCesCfmServiceNumCCMForFault | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.21 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This MIB object indicates the number of CCM frames that must go undelivered for the PBB-TE tunnel before declaring the PBB-TE tunnel as operationally down. This object is only applicable if cienaCesCfmServiceType is set to pbtTunnel, else this object should be ignored. | ||||
| CcienaCesCfmServiceDMMInterval | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current This MIB object indicates the DMM transmission interval index for the service specified by cienaCesCfmServiceType. This determines the frequency at which DMMs are transmitted. The length of the interval increases exponentially with the index value. The value ranges from 3 to 7. The values 3-7 represent indices to CFM intervals as follows: 3 --> 100ms, 4 --> 1sec, 5 --> 10sec, 6 --> 1min, 7 --> 10min. | ||||
| CcienaCesCfmServiceLMMInterval | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.23 | INTEGER | RO | |
column · INTEGER · read-only · current This MIB object indicates the LMM transmission interval index for the service specified by cienaCesCfmServiceType. This determines the frequency at which LMMs are transmitted. The length of the interval increases exponentially with the index value. The value ranges from 1 to 7. The values 1-7 represent indices to CFM intervals as follows: 1 --> 3.33ms, 2 --> 10ms, 3 --> 100ms, 4 --> 1sec, 5 --> 10sec, 6 --> 1min, 7 --> 10min. | ||||
| CcienaCesCfmServiceCCMLossStatsState | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.24 | CienaGlobalState | RO | |
column · CienaGlobalState · read-only · current This object indicates the operational state of CCM loss accounting for RMEPs learned by this service type. | ||||
| CcienaCesCfmServiceCCMLossBucketInterval | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.25 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the interval in minutes that each of the 96 CCM loss history buckets spans. The default is 15 minutes, which means the default history covers 24 hours. | ||||
| CcienaCesCfmServiceY1731 | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.26 | TruthValue | RO | |
column · TruthValue · read-only · current This object indicates whether Y.1731 is enabled for the service. | ||||
| CcienaCesCfmServiceTlvSenderIdType | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.27 | INTEGER | RO | |
column · INTEGER · read-only · current This MIB object indicates the sender ID TLV Type.
| ||||
| CcienaCesCfmServiceRMEPHoldTime | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.28 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This MIB object indicates the remote MEP hold time in milliseconds.
| ||||
| CcienaCesCfmServiceCCMTxState | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.29 | CienaGlobalState | RO | |
column · CienaGlobalState · read-only · current This MIB object indicates the administrative state of the CCM Tx. | ||||
| CcienaCesCfmServicePortStatusFlag | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.30 | TruthValue | RO | |
column · TruthValue · read-only · current This MIB object shows the port status defect flag. | ||||
| CcienaCesCfmServiceRDIFlag | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.31 | TruthValue | RO | |
column · TruthValue · read-only · current This MIB object shows the RDI defect flag. | ||||
| CcienaCesCfmServiceInstabilityFlag | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.32 | TruthValue | RO | |
column · TruthValue · read-only · current This MIB object shows the instability defect flag. | ||||
| CcienaCesCfmServiceRMEPAging | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.33 | TruthValue | RO | |
column · TruthValue · read-only · current Controls automatic remote MEP aging for the service. | ||||
| CcienaCesCfmServiceRMEPDiscovery | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.34 | TruthValue | RO | |
column · TruthValue · read-only · current Controls automatic remote MEP discovery for the service. | ||||
| CcienaCesCfmServiceChargedAgainstGlobalBudget | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.35 | TruthValue | RO | |
column · TruthValue · read-only · current This MIB object reflects if this service is charged against the global frame budget. | ||||
| CcienaCesCfmServiceControlModuleFrameBudget | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.36 | Counter32 | RO | |
column · Counter32 · read-only · current CFM frame budget for the control timing module for the given service.
| ||||
| CcienaCesCfmServiceMulticastDa | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.37 | TruthValue | RO | |
column · TruthValue · read-only · current This object indicates if multicast DA mode is enabled for the service. This object is relevant when the cienaCesCfmServiceType is PBT. | ||||
| CcienaCesCfmServiceCCMRxStats | 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.38 | TruthValue | RO | |
column · TruthValue · read-only · current Controls cfm rx debug stats for the service. | ||||
| NcienaCesCfmMEP | 1.3.6.1.4.1.1271.2.1.4.1.3 | |||
| TcienaCesCfmMEPTable | 1.3.6.1.4.1.1271.2.1.4.1.3.1 | NA | ||
table · not-accessible · current The (conceptual) table listing the configuration parameters for the CFM MEP table. | ||||
| RcienaCesCfmMEPEntry | 1.3.6.1.4.1.1271.2.1.4.1.3.1.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the cienaCesCfmMEPTable. | ||||
| CcienaCesCfmMEPId | 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current This MIB object is used as the index in the table and indicates the MEP ID for the given service. | ||||
| CcienaCesCfmMEPMacAddr | 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.2 | MacAddress | RO | |
column · MacAddress · read-only · current This object indicates the MAC address received on the given service and MEP ID. | ||||
| CcienaCesCfmMEPAdminState | 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.3 | CienaGlobalState | RO | |
column · CienaGlobalState · read-only · current This object is used to specify the administrative state of the CFM MEP. | ||||
| CcienaCesCfmMEPOperState | 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.4 | CienaGlobalState | RO | |
column · CienaGlobalState · read-only · current This object is used to specify the operational state of the CFM MEP. | ||||
| CcienaCesCfmMEPDirection | 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to specify the MEP direction of the service.
| ||||
| CcienaCesCfmMEPCCMState | 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.6 | CienaGlobalState | RO | |
column · CienaGlobalState · read-only · current This object indicates the CCM transmission for the service specified by cienaCesCfmServiceType. | ||||
| CcienaCesCfmMEPCCMPriority | 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the priority of CCM messages transmitted. | ||||
| CcienaCesCfmMEPLTMPriority | 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the priority received on the given service and port. | ||||
| CcienaCesCfmMEPLiType | 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the logical interface type on which the MEP is created.
| ||||
| CcienaCesCfmMEPLiIndex | 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.10 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the logical interface index for creating the MEP. | ||||
| CcienaCesCfmMEPServiceName | 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.11 | DisplayString | RO | |
column · DisplayString · read-only · current This object is used to specify the service name assigned to this port. | ||||
| CcienaCesCfmMEPSubPortName | 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.12 | DisplayString | RO | |
column · DisplayString · read-only · current This object indicates the sub-port, PBB-TE service or MPLS VC name assigned to the given service and port. | ||||
| CcienaCesCfmMEPVsPbtName | 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.13 | DisplayString | RO | |
column · DisplayString · read-only · current This object indicates the virtual switch or PBB-TE tunnel assigned to the given service and port. | ||||
| CcienaCesCfmMEPLogicalPortName | 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.14 | DisplayString | RO | |
column · DisplayString · read-only · current This object indicates the logical port name assigned to the given service and port. | ||||
| CcienaCesCfmMEPSubPortIndex | 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.15 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object is used to specify the CFM sub-port index. | ||||
| CcienaCesCfmMEPEncapsulation | 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to specify the encapsulation applied to the service and port.
| ||||
| CcienaCesCfmMEPLeadPortSlotIndex | 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.17 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object is used as to specify the agent slot that the MEP is in. | ||||
| CcienaCesCfmMEPPBTBvid | 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.18 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the BVID assigned to the given service and port. | ||||
| CcienaCesCfmMEPPBTEtype | 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.19 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the Ethertype assigned to the given service and port. | ||||
| CcienaCesCfmMEPL2XformType | 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.20 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the type of MEP L2 transform. no-op(1) type indicates that there is no MEP level transform. auto(2) type indicates that the MEP inherits the sub-port vtag-stack.
| ||||
| CcienaCesCfmMEPSignalDegradeMonitoringStatus | 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.21 | TruthValue | RO | |
column · TruthValue · read-only · current This object enables/disables signal degrading monitoring on the mep. | ||||
| CcienaCesCfmMEPSignalDegradeTriggerMode | 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current This object sets the signal degrade trigger mode on the mep. nearEnd: In this mode, near end frame loss shall be compared with cienaCesCfmSyntheticLossSessionSdSetThreshold and cienaCesCfmSyntheticLossSessionSdClearThreshold. nearFarEnd: In this mode, both near end and far end frame loss shall be compared with cienaCesCfmSyntheticLossSessionSdSetThreshold and cienaCesCfmSyntheticLossSessionSdClearThreshold.
| ||||
| NcienaCesCfmRemoteMEP | 1.3.6.1.4.1.1271.2.1.4.1.4 | |||
| TcienaCesCfmRemoteMEPTable | 1.3.6.1.4.1.1271.2.1.4.1.4.1 | NA | ||
table · not-accessible · current The (conceptual) table listing the display parameters for the remote MEP table. | ||||
| RcienaCesCfmRemoteMEPEntry | 1.3.6.1.4.1.1271.2.1.4.1.4.1.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the cienaCesCfmRemoteMEPTable. | ||||
| CcienaCesCfmRemoteMEPID | 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current This object is used as an index in the table and is used to specify the MEP ID. | ||||
| CcienaCesCfmRemoteMEPMacAddr | 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.2 | MacAddress | RO | |
column · MacAddress · read-only · current This object is used to specify the MAC address of the logical port where the remote MEP is configured. | ||||
| CcienaCesCfmRemoteMEPAdminState | 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.3 | CienaGlobalState | RO | |
column · CienaGlobalState · read-only · current This object is used to specify the administrative state of the remote MEP state machine. | ||||
| CcienaCesCfmRemoteMEPOperState | 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to specify the operational state of the remote MEP state machine.
| ||||
| CcienaCesCfmRemoteMEPTime | 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.5 | TimeTicks | RO | |
column · TimeTicks · read-only · current This object is used to specify the time at which the remote MEP state machine last entered RMEP_FAILED or RMEP_OK states. | ||||
| CcienaCesCfmRemoteMEPKLastMacStatus | 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.6 | TruthValue | RO | |
column · TruthValue · read-only · current This object is used to specify the last MAC status received. | ||||
| CcienaCesCfmRemoteMEPFailureFlag | 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.7 | TruthValue | RO | |
column · TruthValue · read-only · current This object is used to specify the remote MEP failure flag. | ||||
| CcienaCesCfmRemoteMEPCCMErrorFlag | 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.8 | TruthValue | RO | |
column · TruthValue · read-only · current This object is used to specify the MEP CCM error flag. | ||||
| CcienaCesCfmRemoteMEPRDIErrorFlag | 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.9 | TruthValue | RO | |
column · TruthValue · read-only · current This object is used to specify the MEP RDI error flag. | ||||
| CcienaCesCfmRemoteMEPSubPortName | 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.10 | DisplayString | RO | |
column · DisplayString · read-only · current The object indicates the subport name of the remote MEP. | ||||
| CcienaCesCfmRemoteMEPServiceName | 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.11 | DisplayString | RO | |
column · DisplayString · read-only · current This object is used to specify the service name of the remote MEP. | ||||
| CcienaCesCfmRemoteMEPLastPortStatus | 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used as to specify the remote MEP last port status.
| ||||
| CcienaCesCfmRemoteMEPLastInterfaceStatus | 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used as to specify the remote MEP interface status.
| ||||
| CcienaCesCfmRemoteMEPCCMLevel | 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the remote MEP CCM level. | ||||
| CcienaCesCfmRemoteMEPHoldState | 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the hold state for the remote MEP entry.
| ||||
| NcienaCesCfmDelay | 1.3.6.1.4.1.1271.2.1.4.1.5 | |||
| TcienaCesCfmDelayMsgTable | 1.3.6.1.4.1.1271.2.1.4.1.5.1 | NA | ||
table · not-accessible · current The (conceptual) table listing the configuration parameters for the DelayMeasurementMsg. | ||||
| RcienaCesCfmDelayMsgEntry | 1.3.6.1.4.1.1271.2.1.4.1.5.1.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the cienaCesCfmDelayMsgTable. | ||||
| CcienaCesCfmDelayMsgLocalMEPId | 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current This object is used to specify the local MEP ID. | ||||
| CcienaCesCfmDelayMsgTargetMEPID | 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.2 | Unsigned32 (1..8191) | RO | |
column · Unsigned32 (1..8191) · read-only · current This object is used to specify the MEP ID. | ||||
| CcienaCesCfmDelayMsgServiceName | 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.3 | DisplayString (SIZE (1..31)) | RO | |
column · DisplayString (SIZE (1..31)) · read-only · current This object indicates the service associated with the delay message. | ||||
| CcienaCesCfmDelayMsgAverageDelayThreshold | 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.4 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current This object indicates the threshold for the average delay in microseconds. | ||||
| CcienaCesCfmDelayMsgAverageJitterThreshold | 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.5 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current This object indicates the threshold value for average jitter in microseconds. | ||||
| CcienaCesCfmDelayMsgMaximumDelayThreshold | 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.6 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current This object indicates the threshold for the maximum delay. | ||||
| CcienaCesCfmDelayMsgMaximumJitterThreshold | 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.7 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current This object indicates the threshold value for maximum jitter. | ||||
| CcienaCesCfmDelayMsgAverageDelay | 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the average delay.
| ||||
| CcienaCesCfmDelayMsgAverageJitter | 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the average jitter.
| ||||
| CcienaCesCfmDelayMsgMaximumDelay | 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.10 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the maximum delay.
| ||||
| CcienaCesCfmDelayMsgMaximumJitter | 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the maximum jitter.
| ||||
| CcienaCesCfmDelayMsgMinimumDelay | 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the minimum delay.
| ||||
| CcienaCesCfmDelayMsgMinimumJitter | 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.13 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the minimum jitter.
| ||||
| CcienaCesCfmDelayMsgAverageDelayVariation | 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.14 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the Average Inter Frame Delay Variation.
| ||||
| CcienaCesCfmDelayMsgMaximumDelayVariation | 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.15 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the Maximum Inter Frame Delay Variation.
| ||||
| CcienaCesCfmDelayMsgMinimumDelayVariation | 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.16 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the Minimum Inter Frame Delay Variation.
| ||||
| CcienaCesCfmDelayMsgAverageDelayVariationThreshold | 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.17 | Integer32 (-1..65535) | RO | |
column · Integer32 (-1..65535) · read-only · current This object indicates the threshold value for average Inter Frame Delay Variation. A value of -1 disables the generation of faults. A value of 0 or greater is compared to the Average Delay Variation measured in the test and a fault is generated if the threshold is exceeded.
| ||||
| CcienaCesCfmDelayMsgMaximumDelayVariationThreshold | 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.18 | Integer32 (-1..65535) | RO | |
column · Integer32 (-1..65535) · read-only · current This object indicates the threshold value for maximum Inter Frame Delay Variation. A value of -1 disables the generation of faults. A value of 0 or greater is compared to the Maximum Delay Variation measured in the test and a fault is generated if the threshold is exceeded.
| ||||
| CcienaCesCfmDelayMsgPriority | 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.19 | Unsigned32 (0..7) | RO | |
column · Unsigned32 (0..7) · read-only · current This object specifies the priority that will be encoded in the DMM message. | ||||
| CcienaCesCfmDelayMsgCount | 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.20 | Unsigned32 (2..65535) | RO | |
column · Unsigned32 (2..65535) · read-only · current This object specifies the number of DMM messages that will be transmitted for one Iteration. | ||||
| CcienaCesCfmDelayMsgIterations | 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.21 | Unsigned32 (0..60) | RO | |
column · Unsigned32 (0..60) · read-only · current This object specifies the number of iterations the test has to be conducted. A zero value means that test is continuous, and iterations are infinite. | ||||
| CcienaCesCfmDelayMsgRepeatDelay | 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.22 | Unsigned32 (0..1440) | RO | |
column · Unsigned32 (0..1440) · read-only · current This object specifies the delay in minutes between consecutive test iterations. | ||||
| CcienaCesCfmDelayMsgDuration | 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.23 | Unsigned32 (0..65535) | RO | |
column · Unsigned32 (0..65535) · read-only · current This object specifies the duration of time the test took in seconds to complete one iteration. | ||||
| NcienaCesCfmFrameLoss | 1.3.6.1.4.1.1271.2.1.4.1.6 | |||
| TcienaCesCfmFrameLossMsgTable | 1.3.6.1.4.1.1271.2.1.4.1.6.1 | NA | ||
table · not-accessible · current The (conceptual) table listing the configuration parameters for the FrameLossMeasurementMsg. | ||||
| RcienaCesCfmFrameLossMsgEntry | 1.3.6.1.4.1.1271.2.1.4.1.6.1.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the cienaCesCfmFrameLossMsgTable. | ||||
| CcienaCesCfmFrameLossMsgLocalMEPId | 1.3.6.1.4.1.1271.2.1.4.1.6.1.1.1 | INTEGER (1..65535) | NA | |
column · INTEGER (1..65535) · not-accessible · current This object is used to specify the local MEP ID at the source. | ||||
| CcienaCesCfmFrameLossMsgTargetMEPID | 1.3.6.1.4.1.1271.2.1.4.1.6.1.1.2 | Unsigned32 (1..8191) | RO | |
column · Unsigned32 (1..8191) · read-only · current This object is used to specify the MEP ID. | ||||
| CcienaCesCfmFrameLossMsgNearLossThreshold | 1.3.6.1.4.1.1271.2.1.4.1.6.1.1.3 | INTEGER (0..600) | RO | |
column · INTEGER (0..600) · read-only · current Indicates the threshold value for the near-end frame loss. | ||||
| CcienaCesCfmFrameLossMsgFarLossThreshold | 1.3.6.1.4.1.1271.2.1.4.1.6.1.1.4 | INTEGER (0..600) | RO | |
column · INTEGER (0..600) · read-only · current This object indicates the threshold value for the far-end frame loss. | ||||
| CcienaCesCfmFrameLossMsgServiceName | 1.3.6.1.4.1.1271.2.1.4.1.6.1.1.5 | DisplayString (SIZE (1..31)) | RO | |
column · DisplayString (SIZE (1..31)) · read-only · current This object indicates the service associated with the frame loss measurement message (LMM). | ||||
| CcienaCesCfmFrameLossMsgFrameLossNear | 1.3.6.1.4.1.1271.2.1.4.1.6.1.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the near-end frame loss. For a MEP, near-end frame loss refers to frame loss associated with the ingress data frames. | ||||
| CcienaCesCfmFrameLossMsgFrameLossFar | 1.3.6.1.4.1.1271.2.1.4.1.6.1.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the far-end frame loss. For a MEP, far-end frame loss refers to frame loss associated with the egress data frames. | ||||
| NcienaCesCfmServiceFaultNotifAttrs | 1.3.6.1.4.1.1271.2.1.4.1.7 | |||
| TcienaCesCfmServiceFaultNotifTable | 1.3.6.1.4.1.1271.2.1.4.1.7.1 | NA | ||
table · not-accessible · current The (conceptual) table listing the configuration parameters for the CFM service table. | ||||
| RcienaCesCfmServiceFaultNotifEntry | 1.3.6.1.4.1.1271.2.1.4.1.7.1.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the cienaCesCfmServiceFaultNotifTable. | ||||
| CcienaCesCfmServiceFaultTime | 1.3.6.1.4.1.1271.2.1.4.1.7.1.1.1 | TimeTicks | AN | |
column · TimeTicks · accessible-for-notify · current This object indicates the time at which the fault occurred. | ||||
| CcienaCesCfmServiceFaultType | 1.3.6.1.4.1.1271.2.1.4.1.7.1.1.2 | INTEGER | AN | |
column · INTEGER · accessible-for-notify · current This object indicates the type of fault.
| ||||
| CcienaCesCfmServiceFaultDesc | 1.3.6.1.4.1.1271.2.1.4.1.7.1.1.3 | DisplayString | AN | |
column · DisplayString · accessible-for-notify · current This object indicates the description of the fault. | ||||
| CcienaCesCfmServiceFaultMep | 1.3.6.1.4.1.1271.2.1.4.1.7.1.1.4 | INTEGER (1..8191) | AN | |
column · INTEGER (1..8191) · accessible-for-notify · current This object indicates the MEP ID of the MEP reporting the fault. | ||||
| CcienaCesCfmServiceVsPbtName | 1.3.6.1.4.1.1271.2.1.4.1.7.1.1.5 | DisplayString (SIZE (0..31)) | AN | |
column · DisplayString (SIZE (0..31)) · accessible-for-notify · current This object indicates the virtual switch or PBB-TE tunnel assigned to the given service. | ||||
| NcienaCesCfmMaintenance | 1.3.6.1.4.1.1271.2.1.4.1.8 | |||
| TcienaCesCfmMaintenanceDomainTable | 1.3.6.1.4.1.1271.2.1.4.1.8.1 | NA | ||
table · not-accessible · current The (conceptual) table listing the configuration parameters for the CFM maintenance domain table. | ||||
| RcienaCesCfmMaintenanceDomainEntry | 1.3.6.1.4.1.1271.2.1.4.1.8.1.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the cienaCesCfmMaintenanceDomainTable. | ||||
| CcienaCesCfmMaintenanceDomainIndex | 1.3.6.1.4.1.1271.2.1.4.1.8.1.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the unique index in the table. | ||||
| CcienaCesCfmMaintenanceDomainLevel | 1.3.6.1.4.1.1271.2.1.4.1.8.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the maintenance domain level. | ||||
| CcienaCesCfmMaintenanceDomainName | 1.3.6.1.4.1.1271.2.1.4.1.8.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current This object indicates the maintenance domain name. | ||||
| CcienaCesCfmMaintenanceDomainServiceCount | 1.3.6.1.4.1.1271.2.1.4.1.8.1.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the number of CFM services mapped to this maintenance domain. | ||||
| NcienaCesCfmServiceFrameBudget | 1.3.6.1.4.1.1271.2.1.4.1.9 | |||
| TcienaCesCfmServiceFrameBudgetTable | 1.3.6.1.4.1.1271.2.1.4.1.9.1 | NA | ||
table · not-accessible · current The (conceptual) table listing the configuration parameters for the CFM service frame budget table. | ||||
| RcienaCesCfmServiceFrameBudgetEntry | 1.3.6.1.4.1.1271.2.1.4.1.9.1.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the cienaCesCfmServiceFrameBudgetTable. | ||||
| CcienaCesCfmSlotIndex | 1.3.6.1.4.1.1271.2.1.4.1.9.1.1.1 | INTEGER (1..256) | NA | |
column · INTEGER (1..256) · not-accessible · current This object indicates the slot number. | ||||
| CcienaCesCfmServiceFrameBudgetSlot | 1.3.6.1.4.1.1271.2.1.4.1.9.1.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current This object indicates the CFM frame budget for the slot for the given service.
| ||||
| NcienaCesCfmFrameBudgetGlobal | 1.3.6.1.4.1.1271.2.1.4.1.10 | |||
| ScienaCesCfmGlobalControlModuleFrameBudget | 1.3.6.1.4.1.1271.2.1.4.1.10.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current Control Module Frame Budget. | ||||
| TcienaCesCfmFrameBudgetGlobalTable | 1.3.6.1.4.1.1271.2.1.4.1.10.2 | NA | ||
table · not-accessible · current The (conceptual) table listing the configuration parameters for the CFM global frame budget table. | ||||
| RcienaCesCfmFrameBudgetGlobalEntry | 1.3.6.1.4.1.1271.2.1.4.1.10.2.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the cienaCesCfmGlobalFrameBudgetTable.
| ||||
| CcienaCesCfmFrameBudgetGlobalSlot | 1.3.6.1.4.1.1271.2.1.4.1.10.2.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current This object indicates the global CFM frame budget for the slot.
| ||||
| NcienaCesCfmGlobal | 1.3.6.1.4.1.1271.2.1.4.1.11 | |||
| ScienaCesCfmState | 1.3.6.1.4.1.1271.2.1.4.1.11.1 | CienaGlobalState | RO | |
scalar · CienaGlobalState · read-only · current This object indicates the globally configured CFM state. | ||||
| ScienaCesCfmEtherType | 1.3.6.1.4.1.1271.2.1.4.1.11.2 | EthType | RO | |
scalar · EthType · read-only · current This object indicates the Ethertype value used for CFM frames. | ||||
| ScienaCesCfmMEPHoldTime | 1.3.6.1.4.1.1271.2.1.4.1.11.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current This object indicates the time to hold a MEP in an inactive state.
| ||||
| ScienaCesCfmY1731EtherType | 1.3.6.1.4.1.1271.2.1.4.1.11.4 | EthType | RO | |
scalar · EthType · read-only · current This object indicates the optional alternate Ethertype for Y.1731 frames. | ||||
| ScienaCesCfmGlobalSLMDefaultCount | 1.3.6.1.4.1.1271.2.1.4.1.11.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current The global default count for synthetic loss measurement tests. | ||||
| ScienaCesCfmGlobalSLMDefaultInterval | 1.3.6.1.4.1.1271.2.1.4.1.11.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current The global default interval for synthetic loss measurement tests. The value ranges from 3 to 7. The values 3-7 represent indices to CFM intervals as follows: 3 --> 100ms, 4 --> 1sec, 5 --> 10sec, 6 --> 1min, 7 --> 10min. | ||||
| ScienaCesCfmGlobalSLMDefaultTimeout | 1.3.6.1.4.1.1271.2.1.4.1.11.7 | Integer32 | RO | |
scalar · Integer32 · read-only · current The global default timeout for synthetic loss measurement tests. | ||||
| NcienaCesCfmSyntheticLoss | 1.3.6.1.4.1.1271.2.1.4.1.12 | |||
| TcienaCesCfmSyntheticLossSessionTable | 1.3.6.1.4.1.1271.2.1.4.1.12.1 | NA | ||
table · not-accessible · current The (conceptual) table listing the configuration parameters for the SyntheticLossMeasurement(SLM) message. | ||||
| RcienaCesCfmSyntheticLossSessionEntry | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1 | NA | ||
row · not-accessible · current An entry in the cienaCesCfmSyntheticLossSessionTable. | ||||
| CcienaCesCfmSyntheticLossSessionServiceIndex | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current This object specifies the service index of the SLM message. | ||||
| CcienaCesCfmSyntheticLossSessionLocalMEPId | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.2 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current This object specifies the local mep id of the SLM message. | ||||
| CcienaCesCfmSyntheticLossSessionTargetMEPId | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.3 | Integer32 (1..8191) | NA | |
column · Integer32 (1..8191) · not-accessible · current This object specifies the target mepid of the SLM message. | ||||
| CcienaCesCfmSyntheticLossSessionTestId | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.4 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current This object specifies the test ID of the SLM message. | ||||
| CcienaCesCfmSyntheticLossSessionServiceName | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current This object specifies the service name of the SLM message. | ||||
| CcienaCesCfmSyntheticLossSessionPriority | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.6 | Unsigned32 (0..7) | RO | |
column · Unsigned32 (0..7) · read-only · current This object specifies the priority that will be encoded in the SLM message. | ||||
| CcienaCesCfmSyntheticLossSessionCount | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.7 | Unsigned32 (0 | 2..65535) | RO | |
column · Unsigned32 (0 | 2..65535) · read-only · current This object specifies the number of SLM messages that will be transmitted during this session. | ||||
| CcienaCesCfmSyntheticLossSessionSLMInterval | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.8 | Unsigned32 (0 | 3..7) | RO | |
column · Unsigned32 (0 | 3..7) · read-only · current This object specifies the message interval at which SLMs will be transmitted. The values 3-7 represent indices to CFM intervals as follows: 3 --> 100ms, 4 --> 1sec, 5 --> 10sec, 6 --> 1min, 7 --> 10min. | ||||
| CcienaCesCfmSyntheticLossSessionIterations | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.9 | Unsigned32 (0..60) | RO | |
column · Unsigned32 (0..60) · read-only · current This object specifies the number of iterations the test has to be conducted. Each test iteration is defined by <cienaCesCfmSyntheticLossMsgSLMInterval, cienaCesCfmSyntheticLossMsgCount>. Whereas, the test sessions is defined by test iterations over <cienaCesCfmSyntheticLossMsgRepeatCount>. If this object specifies zero, it means that test is continuous, and iterations are infinite. | ||||
| CcienaCesCfmSyntheticLossSessionRepeatDelay | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.10 | Unsigned32 (0..1440) | RO | |
column · Unsigned32 (0..1440) · read-only · current This object specifies the delay in minutes between consecutive test iterations. | ||||
| CcienaCesCfmSyntheticLossSessionFrameSize | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.11 | Unsigned32 (0 | 65..1400) | RO | |
column · Unsigned32 (0 | 65..1400) · read-only · current This object specifies the size in bytes of the CFM base frame. If this object specifies zero there is no padding. | ||||
| CcienaCesCfmSyntheticLossSessionTimeout | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.12 | Unsigned32 (0 | 2000..10000) | RO | |
column · Unsigned32 (0 | 2000..10000) · read-only · current This object specifies the timeout interval in milliseconds within which the source should receive a SLR for a corresponding SLM Msg. | ||||
| CcienaCesCfmSyntheticLossSessionDuration | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.13 | Unsigned32 (0..65535) | RO | |
column · Unsigned32 (0..65535) · read-only · current This object specifies the duration of time the test took in milliseconds to complete one iteration. | ||||
| CcienaCesCfmSyntheticLossSessionLossNearThreshold | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.14 | Integer32 (-1..65535) | RO | |
column · Integer32 (-1..65535) · read-only · current This object represents the Near Loss Threshold Fault for the Synthetic Loss Measurement test. A value of -1 disables the generation of faults. A value of 0 or greater is compared to the synthetic loss near result of the test and a fault is generated if the threshold is exceeded. | ||||
| CcienaCesCfmSyntheticLossSessionLossFarThreshold | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.15 | Integer32 (-1..65535) | RO | |
column · Integer32 (-1..65535) · read-only · current This object represents the Far Loss Threshold Fault for the Synthetic Loss Measurement test. A value of -1 disables the generation of faults. A value of 0 or greater is compared to the synthetic loss near result of the test and a fault is generated if the threshold is exceeded. | ||||
| CcienaCesCfmSyntheticLossSessionNumSLMSent | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.16 | Unsigned32 (1..65535) | RO | |
column · Unsigned32 (1..65535) · read-only · current This object specifies the number of SLM messages sent in the latest test iteration. | ||||
| CcienaCesCfmSyntheticLossSessionNumSLRReceived | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.17 | Unsigned32 (1..65535) | RO | |
column · Unsigned32 (1..65535) · read-only · current This object specifies the number of SLR messages received in the latest test iteration. | ||||
| CcienaCesCfmSyntheticLossSessionFrameLossNear | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current This object specifies the Near Loss Threshold in the latest test iteration. | ||||
| CcienaCesCfmSyntheticLossSessionFrameLossFar | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.19 | Integer32 | RO | |
column · Integer32 · read-only · current This object specifies the Far Loss Threshold in the latest test iteration. | ||||
| CcienaCesCfmSyntheticLossSessionAvgFrameLossNear | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.20 | Integer32 | RO | |
column · Integer32 · read-only · current This object specifies the average Near Loss Threshold of the test session. | ||||
| CcienaCesCfmSyntheticLossSessionMinFrameLossNear | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.21 | Integer32 | RO | |
column · Integer32 · read-only · current This object specifies the minimum Near Loss Threshold of the test session. | ||||
| CcienaCesCfmSyntheticLossSessionMaxFrameLossNear | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.22 | Integer32 | RO | |
column · Integer32 · read-only · current This object specifies the maximum Near Loss Threshold of the test session. | ||||
| CcienaCesCfmSyntheticLossSessionAvgFrameLossFar | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.23 | Integer32 | RO | |
column · Integer32 · read-only · current This object specifies the average Far Loss Threshold of the test session. | ||||
| CcienaCesCfmSyntheticLossSessionMinFrameLossFar | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.24 | Integer32 | RO | |
column · Integer32 · read-only · current This object specifies the minimum Far Loss Threshold of the test session. | ||||
| CcienaCesCfmSyntheticLossSessionMaxFrameLossFar | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.25 | Integer32 | RO | |
column · Integer32 · read-only · current This object specifies the maximum Far Loss Threshold of the test session. | ||||
| CcienaCesCfmSyntheticLossSessionFrameLossRatioNear | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.26 | CfmFrameLossRatio | RO | |
column · CfmFrameLossRatio · read-only · current This object specifies the Frame Loss Ratio in percentile of loss at Nearend in the last iteration of the completed test. | ||||
| CcienaCesCfmSyntheticLossSessionFrameLossRatioFar | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.27 | CfmFrameLossRatio | RO | |
column · CfmFrameLossRatio · read-only · current This object specifies the Frame Loss Ratio in percentile of loss at Farend in the last iteration of the completed test. | ||||
| CcienaCesCfmSyntheticLossSessionSdSetThreshold | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.28 | Integer32 (-1..65535) | RO | |
column · Integer32 (-1..65535) · read-only · current This object represents the signal degrade set threshold value for the synthetic loss measurement test. A value of 0 or greater is compared to the frame loss result and fault is set, if the loss exceeds this threshold. A value of -1 disables the generation of signal degrade fault notification. This object works in conjunction with cienaCesCfmSyntheticLossSessionSdClearThreshold. If one object is given non-default value, other should be also set to non-default value. | ||||
| CcienaCesCfmSyntheticLossSessionSdClearThreshold | 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.29 | Integer32 (-1..65535) | RO | |
column · Integer32 (-1..65535) · read-only · current This object represents the signal degrade clear threshold value for the synthetic loss measurement test. A value of 0 or greater is compared to the frame loss result and a fault is cleared, if loss is equal to or below this threshold. A value of -1 disables the generation of signal degrade fault notification This object works in conjunction with cienaCesCfmSyntheticLossSessionSdSetThreshold. If one object is given non-default value, other should be also set to non-default value. | ||||
| TcienaCesCfmSyntheticLossResponderTable | 1.3.6.1.4.1.1271.2.1.4.1.12.2 | NA | ||
table · not-accessible · current The (conceptual) table lists the Synthetic Loss Measurement (SLM) responders. | ||||
| RcienaCesCfmSyntheticLossResponderEntry | 1.3.6.1.4.1.1271.2.1.4.1.12.2.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the cienaCesCfmSyntheticLossResponderTable. | ||||
| CcienaCesCfmSyntheticLossResponderServiceIndex | 1.3.6.1.4.1.1271.2.1.4.1.12.2.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current This object specifies the service index of the SLM responder. | ||||
| CcienaCesCfmSyntheticLossResponderLocalMEPId | 1.3.6.1.4.1.1271.2.1.4.1.12.2.1.2 | Integer32 (1..8191) | NA | |
column · Integer32 (1..8191) · not-accessible · current This object specifies the local mep id of the SLM responder. | ||||
| CcienaCesCfmSyntheticLossResponderRemoteMEPId | 1.3.6.1.4.1.1271.2.1.4.1.12.2.1.3 | Integer32 (1..8191) | NA | |
column · Integer32 (1..8191) · not-accessible · current This object specifies the remote mep id of the SLM responder. | ||||
| CcienaCesCfmSyntheticLossResponderTestId | 1.3.6.1.4.1.1271.2.1.4.1.12.2.1.4 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current This object specifies the test ID of the SLM responder. | ||||
| CcienaCesCfmSyntheticLossResponderServiceName | 1.3.6.1.4.1.1271.2.1.4.1.12.2.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current This object specifies the service name of the SLM responder. | ||||
| CcienaCesCfmSyntheticLossResponderLocalMac | 1.3.6.1.4.1.1271.2.1.4.1.12.2.1.6 | MacAddress | RO | |
column · MacAddress · read-only · current This object identifies the MAC address of the local mep. | ||||
| CcienaCesCfmSyntheticLossResponderRemoteMac | 1.3.6.1.4.1.1271.2.1.4.1.12.2.1.7 | MacAddress | RO | |
column · MacAddress · read-only · current This object identifies the MAC address of the remote mep. | ||||
| CcienaCesCfmSyntheticLossResponderNumSLMReceived | 1.3.6.1.4.1.1271.2.1.4.1.12.2.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object specifies the number of SLM frames received by this responder. | ||||
| CcienaCesCfmSyntheticLossResponderNumSLRSent | 1.3.6.1.4.1.1271.2.1.4.1.12.2.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object specifies the number of SLR frames sent by this responder. | ||||
| NcienaCesCfmNotifMIBNotificationPrefix | 1.3.6.1.4.1.1271.2.2.5 | |||
| NcienaCesCfmNotifMIBNotification | 1.3.6.1.4.1.1271.2.2.5.0 | |||
| !cienaCesCfmFaultTrapSet | 1.3.6.1.4.1.1271.2.2.5.0.1 | |||
notification · current A notification is sent whenever the fault is detected. Setting the cienaCesCfmFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmServiceName, cienaCesCfmServiceType, cienaCesCfmServiceValue, cienaCesCfmServiceAdminState, cienaCesCfmServiceOperState, cienaCesCfmServiceMdLevel, cienaCesCfmServiceFaultTime, cienaCesCfmServiceFaultType, cienaCesCfmServiceFaultDesc, cienaCesCfmServiceFaultMep, and cienaCesCfmServiceVsPbtName.
| ||||
| !cienaCesCfmFaultTrapClear | 1.3.6.1.4.1.1271.2.2.5.0.2 | |||
notification · current A notification is sent whenever the fault is resolved and cleared. Setting the cienaCesCfmFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmServiceName, cienaCesCfmServiceType, cienaCesCfmServiceValue, cienaCesCfmServiceAdminState, cienaCesCfmServiceOperState, cienaCesCfmServiceMdLevel, cienaCesCfmServiceVsPbtName, cienaCesCfmServiceFaultTime, cienaCesCfmServiceFaultType, cienaCesCfmServiceFaultDesc, and cienaCesCfmServiceFaultMep.
| ||||
| !cienaCesCfmAverageDelayFaultTrapSet | 1.3.6.1.4.1.1271.2.2.5.0.3 | |||
notification · current A notification is sent whenever average delay goes above delay-threshold during a delay measurement test. Setting the cienaCesCfmDelayFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgAverageDelayThreshold, and cienaCesCfmDelayMsgAverageDelay. | ||||
| !cienaCesCfmAverageDelayFaultTrapClear | 1.3.6.1.4.1.1271.2.2.5.0.4 | |||
notification · current A notification is sent whenever average delay comes back to normal. Setting the cienaCesCfmDelayFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgAverageDelayThreshold, and cienaCesCfmDelayMsgAverageDelay. | ||||
| !cienaCesCfmMaximumDelayFaultTrapSet | 1.3.6.1.4.1.1271.2.2.5.0.5 | |||
notification · current A notification is sent whenever maximum delay goes above delay-threshold during a delay measurement test. Setting the cienaCesCfmDelayFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgMaximumDelayThreshold, and cienaCesCfmDelayMsgMaximumDelay. | ||||
| !cienaCesCfmMaximumDelayFaultTrapClear | 1.3.6.1.4.1.1271.2.2.5.0.6 | |||
notification · current A notification is sent whenever maximum delay comes back to normal. Setting the cienaCesCfmDelayFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgMaximumDelayThreshold, and cienaCesCfmDelayMsgMaximumDelay. | ||||
| !cienaCesCfmAverageJitterTrapSet | 1.3.6.1.4.1.1271.2.2.5.0.7 | |||
notification · current A notification is sent whenever average jitter goes above average jitter-threshold during a jitter measurement test. Setting the cienaCesCfmJitterFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgAverageJitterThreshold, and cienaCesCfmDelayMsgAverageJitter. | ||||
| !cienaCesCfmAverageJitterTrapClear | 1.3.6.1.4.1.1271.2.2.5.0.8 | |||
notification · current A notification is sent whenever average jitter comes back to normal. Setting the cienaCesCfmJitterFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgAverageJitterThreshold, and cienaCesCfmDelayMsgAverageJitter. | ||||
| !cienaCesCfmMaximumJitterTrapSet | 1.3.6.1.4.1.1271.2.2.5.0.9 | |||
notification · current A notification is sent whenever maximum jitter goes above maximum jitter-threshold during a jitter measurement test. Setting the cienaCesCfmJitterFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgMaximumJitterThreshold, and cienaCesCfmDelayMsgMaximumJitter. | ||||
| !cienaCesCfmMaximumJitterTrapClear | 1.3.6.1.4.1.1271.2.2.5.0.10 | |||
notification · current A notification is sent whenever maximum jitter comes back to normal. Setting the cienaCesCfmJitterFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity,cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgMaximumJitterThreshold, and cienaCesCfmDelayMsgMaximumJitter. | ||||
| !cienaCesCfmFrameLossNearTrapSet | 1.3.6.1.4.1.1271.2.2.5.0.11 | |||
notification · current A notification is sent whenever frame-loss-near goes above frame-loss-near threshold during a frame loss measurement test. Setting the cienaCesCfmFrameLossNearFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmFrameLossMsgServiceName,cienaCesCfmFrameLossMsgLocalMEPId, cienaCesCfmFrameLossMsgNearLossThreshold, and cienaCesCfmFrameLossMsgFrameLossNear. | ||||
| !cienaCesCfmFrameLossNearTrapClear | 1.3.6.1.4.1.1271.2.2.5.0.12 | |||
notification · current A notification is sent whenever frame-loss-near returns to normal during a frame loss measurement test. Setting the cienaCesCfmFrameLossNearFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaCesCfmFrameLossMsgServiceName, cienaCesCfmFrameLossMsgLocalMEPId, cienaCesCfmFrameLossMsgNearLossThreshold, and cienaCesCfmFrameLossMsgFrameLossNear. | ||||
| !cienaCesCfmFrameLossFarTrapSet | 1.3.6.1.4.1.1271.2.2.5.0.13 | |||
notification · current A notification is sent whenever frame-loss-far goes above frame-loss-far threshold during a frame loss measurement test. Setting the cienaCesCfmFrameLossFarFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmFrameLossMsgServiceName, cienaCesCfmFrameLossMsgLocalMEPId, cienaCesCfmFrameLossMsgFarLossThreshold, and cienaCesCfmFrameLossMsgFrameLossFar. | ||||
| !cienaCesCfmFrameLossFarTrapClear | 1.3.6.1.4.1.1271.2.2.5.0.14 | |||
notification · current A notification is sent whenever frame-loss-far returns to normal during a frame loss measurement test. Setting the cienaCesCfmFrameLossFarFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmFrameLossMsgServiceName, cienaCesCfmFrameLossMsgLocalMEPId, cienaCesCfmFrameLossMsgFarLossThreshold, and cienaCesCfmFrameLossMsgFrameLossFar. | ||||
| !cienaCesSyntheticLossSessionNearFaultTrap | 1.3.6.1.4.1.1271.2.2.5.0.15 | |||
notification · current A notification is sent whenever the fault is detected during a Synthetic Loss Measurement test with a near loss threshold fault. Setting the cienaCesCfmSyntheticLossNearFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include : cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmSyntheticLossSessionServiceName, cienaCesCfmSyntheticLossSessionFrameLossNear, cienaCesCfmSyntheticLossSessionLossNearThreshold. | ||||
| !cienaCesSyntheticLossSessionFarFaultTrap | 1.3.6.1.4.1.1271.2.2.5.0.16 | |||
notification · current A notification is sent whenever the fault is detected during a Synthetic Loss Measurement test with a far loss threshold fault. Setting the cienaCesCfmSyntheticLossFarFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaCesCfmSyntheticLossSessionServiceName, cienaCesCfmSyntheticLossSessionFrameLossFar, cienaCesCfmSyntheticLossSessionLossFarThreshold. | ||||
| !cienaCesSyntheticLossSessionNearFaultClearTrap | 1.3.6.1.4.1.1271.2.2.5.0.17 | |||
notification · current A notification is sent whenever the fault is cleared during a Synthetic Loss Measurement test with a near loss threshold fault.Setting the cienaCesCfmSyntheticLossNearFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmSyntheticLossSessionServiceName, cienaCesCfmSyntheticLossSessionFrameLossNear, cienaCesCfmSyntheticLossSessionLossNearThreshold. | ||||
| !cienaCesSyntheticLossSessionFarFaultClearTrap | 1.3.6.1.4.1.1271.2.2.5.0.18 | |||
notification · current A notification is sent whenever the fault is cleared during a Synthetic Loss Measurement test with a far loss threshold fault.Setting the cienaCesCfmSyntheticLossFarFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable Bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmSyntheticLossSessionServiceName, cienaCesCfmSyntheticLossSessionFrameLossFar,cienaCesCfmSyntheticLossSessionLossFarThreshold | ||||
| !cienaCesCfmAverageDelayVariationTrapSet | 1.3.6.1.4.1.1271.2.2.5.0.19 | |||
notification · current A notification is sent whenever Average Delay Variation goes above Average Delay Variation threshold during a Delay Variation measurement test. Setting the cienaCesCfmDelayVariationFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgAverageDelayVariationThreshold, and cienaCesCfmDelayMsgAverageDelayVariation. | ||||
| !cienaCesCfmAverageDelayVariationTrapClear | 1.3.6.1.4.1.1271.2.2.5.0.20 | |||
notification · current A notification is sent whenever Average Delay Variation comes back below the threshold level during a Delay Variation measurement test. Setting the cienaCesCfmDelayVariationFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgAverageDelayVariationThreshold, and cienaCesCfmDelayMsgAverageDelayVariation. | ||||
| !cienaCesCfmMaximumDelayVariationTrapSet | 1.3.6.1.4.1.1271.2.2.5.0.21 | |||
notification · current A notification is sent whenever Maximum Delay Variation goes above Maximum Delay Variation threshold during a Delay Variation measurement test. Setting the cienaCesCfmDelayVariationFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgMaximumDelayVariationThreshold, and cienaCesCfmDelayMsgMaximumDelayVariation. | ||||
| !cienaCesCfmMaximumDelayVariationTrapClear | 1.3.6.1.4.1.1271.2.2.5.0.22 | |||
notification · current A notification is sent whenever Maximum Delay Variation comes back below the threshold level during a Delay Variation measurement test. Setting the cienaCesCfmDelayVariationFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgMaximumDelayVariationThreshold, and cienaCesCfmDelayMsgMaximumDelayVariation. | ||||
| !cienaCesCfmSyntheticLossSessionSignalDegradeFaultTrapSet | 1.3.6.1.4.1.1271.2.2.5.0.23 | |||
notification · current A notification is sent whenever the signal degrade fault is detected during a Synthetic Loss Measurement test. | ||||
| !cienaCesCfmSyntheticLossSessionSignalDegradeFaultTrapClear | 1.3.6.1.4.1.1271.2.2.5.0.24 | |||
notification · current A notification is sent whenever the signal degrade fault is cleared during a Synthetic Loss Measurement test. | ||||
| NcienaCesCfmStatisticsMIBObjects | 1.3.6.1.4.1.1271.2.3.4 | |||
| NcienaCesCfmMibObjects | 1.3.6.1.4.1.1271.2.3.4.1 | |||
| NcienaCesCfmGlobalMIBObjects | 1.3.6.1.4.1.1271.2.3.4.1.1 | |||
| ScienaCesCfmGlobalStatsClear | 1.3.6.1.4.1.1271.2.3.4.1.1.1 | CienaStatsClear | RW | |
scalar · CienaStatsClear · read-write · current Setting this object clears CFM statistics globally. | ||||
| NcienaCesCfmGlobalFrameBudget | 1.3.6.1.4.1.1271.2.3.4.1.1.2 | |||
| ScienaCesCfmGlobalFrameBudgetControlModule | 1.3.6.1.4.1.1271.2.3.4.1.1.2.1 | Counter32 | RO | deprecated |
scalar · Counter32 · read-only · deprecated Control Module Frame Budget is deprecated because it is moved from statistics to node definitions. | ||||
| ScienaCesCfmGlobalFrameBudgetSlot1 | 1.3.6.1.4.1.1271.2.3.4.1.1.2.2 | Counter32 | RO | deprecated |
scalar · Counter32 · read-only · deprecated Slot1 Frame Budget. | ||||
| ScienaCesCfmGlobalFrameBudgetSlot2 | 1.3.6.1.4.1.1271.2.3.4.1.1.2.3 | Counter32 | RO | deprecated |
scalar · Counter32 · read-only · deprecated Slot2 Frame Budget. | ||||
| ScienaCesCfmGlobalFrameBudgetSlot3 | 1.3.6.1.4.1.1271.2.3.4.1.1.2.4 | Counter32 | RO | deprecated |
scalar · Counter32 · read-only · deprecated Slot3 Frame Budget. | ||||
| ScienaCesCfmGlobalFrameBudgetSlot4 | 1.3.6.1.4.1.1271.2.3.4.1.1.2.5 | Counter32 | RO | deprecated |
scalar · Counter32 · read-only · deprecated Slot4 Frame Budget. | ||||
| ScienaCesCfmGlobalFrameBudgetSlot5 | 1.3.6.1.4.1.1271.2.3.4.1.1.2.6 | Counter32 | RO | deprecated |
scalar · Counter32 · read-only · deprecated Slot5 Frame Budget. | ||||
| ScienaCesCfmGlobalFrameBudgetSlot6 | 1.3.6.1.4.1.1271.2.3.4.1.1.2.7 | Counter32 | RO | deprecated |
scalar · Counter32 · read-only · deprecated Slot6 Frame Budget. | ||||
| ScienaCesCfmGlobalFrameBudgetSlot7 | 1.3.6.1.4.1.1271.2.3.4.1.1.2.8 | Counter32 | RO | deprecated |
scalar · Counter32 · read-only · deprecated Slot7 Frame Budget. | ||||
| ScienaCesCfmGlobalFrameBudgetSlot8 | 1.3.6.1.4.1.1271.2.3.4.1.1.2.9 | Counter32 | RO | deprecated |
scalar · Counter32 · read-only · deprecated Slot8 Frame Budget. | ||||
| ScienaCesCfmGlobalFrameBudgetSlot9 | 1.3.6.1.4.1.1271.2.3.4.1.1.2.10 | Counter32 | RO | deprecated |
scalar · Counter32 · read-only · deprecated Slot9 Frame Budget. | ||||
| ScienaCesCfmGlobalFrameBudgetSlot10 | 1.3.6.1.4.1.1271.2.3.4.1.1.2.11 | Counter32 | RO | deprecated |
scalar · Counter32 · read-only · deprecated Slot10 Frame Budget. | ||||
| NcienaCesCfmGlobalStats | 1.3.6.1.4.1.1271.2.3.4.1.1.3 | |||
| ScienaCesCfmGlobalStatsTxTotalFrames | 1.3.6.1.4.1.1271.2.3.4.1.1.3.1 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of CFM frames sent. | ||||
| ScienaCesCfmGlobalStatsTxFloodedframes | 1.3.6.1.4.1.1271.2.3.4.1.1.3.2 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of flooded frames sent. | ||||
| ScienaCesCfmGlobalStatsTxFloodignoredInvalidLevel | 1.3.6.1.4.1.1271.2.3.4.1.1.3.3 | Counter64 | RO | |
scalar · Counter64 · read-only · current This counter is incremented when the frame's destination MAC is not the expected multicast destination MAC for the frame's MD level. | ||||
| ScienaCesCfmGlobalStatsTxFloodignoredHighLevelMepExist | 1.3.6.1.4.1.1271.2.3.4.1.1.3.4 | Counter64 | RO | |
scalar · Counter64 · read-only · current This counter is incremented when there is a MEP at a higher MD level than the frame's MD level that blocks the frame from being flooded. | ||||
| ScienaCesCfmGlobalStatsTxFloodignoredSTPState | 1.3.6.1.4.1.1271.2.3.4.1.1.3.5 | Counter64 | RO | |
scalar · Counter64 · read-only · current This counter is incremented when the STP state of the ingress or egress port is something other than forwarding. | ||||
| ScienaCesCfmGlobalStatsRxTotalFrames | 1.3.6.1.4.1.1271.2.3.4.1.1.3.6 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of frames received. | ||||
| ScienaCesCfmGlobalStatsRxDropInvalidEtype | 1.3.6.1.4.1.1271.2.3.4.1.1.3.7 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of frames dropped when the mode is administratively disabled. | ||||
| ScienaCesCfmGlobalStatsRxDropInvalidOpCode | 1.3.6.1.4.1.1271.2.3.4.1.1.3.8 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of received invalid opcode frames dropped. | ||||
| ScienaCesCfmGlobalStatsRxDropL2DAHeaderLevelMismatch | 1.3.6.1.4.1.1271.2.3.4.1.1.3.9 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of frames dropped when the system is not in STP forwarding mode. | ||||
| ScienaCesCfmGlobalStatsRxTotalMalformedFrames | 1.3.6.1.4.1.1271.2.3.4.1.1.3.10 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of malformed CFM frames received. | ||||
| NcienaCesCfmGlobalCCMStats | 1.3.6.1.4.1.1271.2.3.4.1.1.4 | |||
| ScienaCesCfmGlobalCCMStatsTxTotalCCM | 1.3.6.1.4.1.1271.2.3.4.1.1.4.1 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of CCM frames sent. | ||||
| ScienaCesCfmGlobalCCMStatsTxTotalCCMFlooded | 1.3.6.1.4.1.1271.2.3.4.1.1.4.2 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of flooded CCM frames sent. | ||||
| ScienaCesCfmGlobalCCMStatsRxTotalCCM | 1.3.6.1.4.1.1271.2.3.4.1.1.4.3 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of valid frames received. | ||||
| ScienaCesCfmGlobalCCMStatsRxTotalCCMSequenceErrors | 1.3.6.1.4.1.1271.2.3.4.1.1.4.5 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of errored CCM frames received in sequence. | ||||
| ScienaCesCfmGlobalCCMStatsRxInvalidMAID | 1.3.6.1.4.1.1271.2.3.4.1.1.4.6 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of MD level CFM frames received. | ||||
| ScienaCesCfmGlobalCCMStatsRxInvalidCCMInterval | 1.3.6.1.4.1.1271.2.3.4.1.1.4.7 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of MAID Xcon CFM frames received. | ||||
| ScienaCesCfmGlobalCCMStatsRxInvalidFirstTlvOffset | 1.3.6.1.4.1.1271.2.3.4.1.1.4.8 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of frames dropped when the mode is administratively disabled. | ||||
| ScienaCesCfmGlobalCCMStatsRxInvalidPortStatusTlv | 1.3.6.1.4.1.1271.2.3.4.1.1.4.9 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of CCM frames received with invalid port status TLV. | ||||
| ScienaCesCfmGlobalCCMStatsRxInvalidInterfaceStatusTlv | 1.3.6.1.4.1.1271.2.3.4.1.1.4.11 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of invalid CCM frames received with invalid interface status TLV. | ||||
| ScienaCesCfmGlobalCCMStatsRxInvalidLogicalInterface | 1.3.6.1.4.1.1271.2.3.4.1.1.4.12 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of invalid CCM frames received with invalid logical interface status TLV. | ||||
| ScienaCesCfmGlobalCCMStatsRxInvalidServiceInstance | 1.3.6.1.4.1.1271.2.3.4.1.1.4.13 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of invalid CCM frames received on invalid service instance. | ||||
| ScienaCesCfmGlobalCCMStatsRxInvalidPBTEncapTunnel | 1.3.6.1.4.1.1271.2.3.4.1.1.4.14 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of invalid CCM frames received on invalid PBB-TE encapsulation tunnel. | ||||
| ScienaCesCfmGlobalCCMStatsRxDropAdminDisable | 1.3.6.1.4.1.1271.2.3.4.1.1.4.15 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of CCM frames dropped because of a disabled administrative state. | ||||
| ScienaCesCfmGlobalCCMStatsRxDropSTPstatenotForwarding | 1.3.6.1.4.1.1271.2.3.4.1.1.4.16 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of CCM frames dropped because STP state was not forwarding. | ||||
| ScienaCesCfmGlobalCCMStatsRxDropCCMBlockedbyOppMep | 1.3.6.1.4.1.1271.2.3.4.1.1.4.17 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of invalid CCM frames dropped because CCM was blocked by opposite MEP. | ||||
| ScienaCesCfmGlobalCCMStatsRxDropCCMLeakage | 1.3.6.1.4.1.1271.2.3.4.1.1.4.18 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of CCM frames dropped because of CCM leakage. | ||||
| ScienaCesCfmGlobalCCMStatsRxDropCCMTooLong | 1.3.6.1.4.1.1271.2.3.4.1.1.4.19 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of invalid CCM received frames dropped because CCM was too long. | ||||
| ScienaCesCfmGlobalCCMStatsRxDropCCMServiceDisabled | 1.3.6.1.4.1.1271.2.3.4.1.1.4.20 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of CCM frames received and dropped because the service was disabled. | ||||
| ScienaCesCfmGlobalCCMStatsRxTotalErrorCCM | 1.3.6.1.4.1.1271.2.3.4.1.1.4.21 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of CCM frames received with Error CCM fault. | ||||
| ScienaCesCfmGlobalCCMStatsRxTotalMalformedCCM | 1.3.6.1.4.1.1271.2.3.4.1.1.4.22 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of malformed CCM frames received. | ||||
| ScienaCesCfmGlobalCCMStatsRxTotalMEPCCM | 1.3.6.1.4.1.1271.2.3.4.1.1.4.23 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of CCM frames received by CFM MEPs. | ||||
| ScienaCesCfmGlobalCCMStatsRxTotalMIPCCM | 1.3.6.1.4.1.1271.2.3.4.1.1.4.24 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of CCM frames received by CFM MIPs. | ||||
| NcienaCesCfmGlobalLoopbackStats | 1.3.6.1.4.1.1271.2.3.4.1.1.5 | |||
| ScienaCesCfmGlobalLoopbackStatsTxTotalLBM | 1.3.6.1.4.1.1271.2.3.4.1.1.5.1 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of loopback message frames sent. | ||||
| ScienaCesCfmGlobalLoopbackStatsTxTotalLBR | 1.3.6.1.4.1.1271.2.3.4.1.1.5.2 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of loopback reply frames sent. | ||||
| ScienaCesCfmGlobalLoopbackStatsRxTotalLBM | 1.3.6.1.4.1.1271.2.3.4.1.1.5.3 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of loopback message frames received. | ||||
| ScienaCesCfmGlobalLoopbackStatsRxTotalLBR | 1.3.6.1.4.1.1271.2.3.4.1.1.5.4 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of loopback reply frames received. | ||||
| ScienaCesCfmGlobalLoopbackStatsRxTotalInOrderLBR | 1.3.6.1.4.1.1271.2.3.4.1.1.5.5 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of in order loopback reply frames received. | ||||
| ScienaCesCfmGlobalLoopbackStatsRxTotalOutOfOrderLBR | 1.3.6.1.4.1.1271.2.3.4.1.1.5.6 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of out of order loopback reply frames received. | ||||
| ScienaCesCfmGlobalLoopbackStatsRxTotalContentMismatchLBR | 1.3.6.1.4.1.1271.2.3.4.1.1.5.7 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of content mismatch loopback reply frames sent. | ||||
| ScienaCesCfmGlobalLoopbackStatsRxTotalUnexpectedLBR | 1.3.6.1.4.1.1271.2.3.4.1.1.5.8 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of unexpected loopback reply frames received. | ||||
| ScienaCesCfmGlobalLoopbackStatsRxLBMInvalidFirstTLVOffset | 1.3.6.1.4.1.1271.2.3.4.1.1.5.9 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of loopback message frames received with invalid TLV offset. | ||||
| ScienaCesCfmGlobalLoopbackStatsRxLBRInvalidFirstTLVOffset | 1.3.6.1.4.1.1271.2.3.4.1.1.5.10 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of loopback reply frames received with invalid first TLV offset. | ||||
| ScienaCesCfmGlobalLoopbackStatsRxUnresolvedLBM | 1.3.6.1.4.1.1271.2.3.4.1.1.5.11 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of unresolved loopback message frames received. | ||||
| ScienaCesCfmGlobalLoopbackStatsRxUnresolvedLBR | 1.3.6.1.4.1.1271.2.3.4.1.1.5.12 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of unresolved loopback reply frames received. | ||||
| ScienaCesCfmGlobalLoopbackStatsRxTotalMalformedLBM | 1.3.6.1.4.1.1271.2.3.4.1.1.5.13 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of malformed loopback messages received. | ||||
| NcienaCesCfmGlobalLinkTraceStats | 1.3.6.1.4.1.1271.2.3.4.1.1.6 | |||
| ScienaCesCfmGlobalLinkTraceStatsTxTotalLTM | 1.3.6.1.4.1.1271.2.3.4.1.1.6.1 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of linktrace messages transmitted. | ||||
| ScienaCesCfmGlobalLinkTraceStatsTxTotalLTR | 1.3.6.1.4.1.1271.2.3.4.1.1.6.2 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of linktrace replies transmitted. | ||||
| ScienaCesCfmGlobalLinkTraceStatsRxTotalLTM | 1.3.6.1.4.1.1271.2.3.4.1.1.6.3 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of linktrace messages received. | ||||
| ScienaCesCfmGlobalLinkTraceStatsRxTotalLTR | 1.3.6.1.4.1.1271.2.3.4.1.1.6.4 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of linktrace replies received. | ||||
| ScienaCesCfmGlobalLinkTraceStatsRxTotalUnexpectedLTR | 1.3.6.1.4.1.1271.2.3.4.1.1.6.5 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of unexpected linktrace replies received. | ||||
| ScienaCesCfmGlobalLinkTraceStatsRxLTMInvalidFirstTLVOffset | 1.3.6.1.4.1.1271.2.3.4.1.1.6.6 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of linktrace messages received with an invalid first TLV offset. | ||||
| ScienaCesCfmGlobalLinkTraceStatsRxLTRInvalidFirstTLVOffset | 1.3.6.1.4.1.1271.2.3.4.1.1.6.7 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of linktrace replies received with an invalid first TLV offset. | ||||
| ScienaCesCfmGlobalLinkTraceStatsRxLTRInvalidRelayAction | 1.3.6.1.4.1.1271.2.3.4.1.1.6.8 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of linktrace replies received with an invalid relay action. | ||||
| ScienaCesCfmGlobalLinkTraceStatsRxUnresolvedLTM | 1.3.6.1.4.1.1271.2.3.4.1.1.6.9 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of linktrace messages received that could not be resolved. | ||||
| ScienaCesCfmGlobalLinkTraceStatsRxUnresolvedLTR | 1.3.6.1.4.1.1271.2.3.4.1.1.6.10 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of linktrace replies received that could not be resolved. | ||||
| NcienaCesCfmGlobalDelayMeasurementStats | 1.3.6.1.4.1.1271.2.3.4.1.1.7 | |||
| ScienaCesCfmGlobalDelayMeasurementStatsTxTotalDMM | 1.3.6.1.4.1.1271.2.3.4.1.1.7.1 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of DMM frames transmitted. | ||||
| ScienaCesCfmGlobalDelayMeasurementStatsTxTotalDMR | 1.3.6.1.4.1.1271.2.3.4.1.1.7.2 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of DMR frames transmitted. | ||||
| ScienaCesCfmGlobalDelayMeasurementStatsRxTotalDMM | 1.3.6.1.4.1.1271.2.3.4.1.1.7.3 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of DMM frames received. | ||||
| ScienaCesCfmGlobalDelayMeasurementStatsRxTotalDMR | 1.3.6.1.4.1.1271.2.3.4.1.1.7.4 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of DMR frames received. | ||||
| NcienaCesCfmGlobalLossMeasurementStats | 1.3.6.1.4.1.1271.2.3.4.1.1.8 | |||
| ScienaCesCfmGlobalLossMeasurementStatsTxTotalLMM | 1.3.6.1.4.1.1271.2.3.4.1.1.8.1 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of LMM frames transmitted. | ||||
| ScienaCesCfmGlobalLossMeasurementStatsTxTotalLMR | 1.3.6.1.4.1.1271.2.3.4.1.1.8.2 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of LMR frames transmitted. | ||||
| ScienaCesCfmGlobalLossMeasurementStatsRxTotalLMM | 1.3.6.1.4.1.1271.2.3.4.1.1.8.3 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of LMM frames received. | ||||
| ScienaCesCfmGlobalLossMeasurementStatsRxTotalLMR | 1.3.6.1.4.1.1271.2.3.4.1.1.8.4 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of LMR frames received. | ||||
| NcienaCesCfmGlobalSyntheticLossMeasurementStats | 1.3.6.1.4.1.1271.2.3.4.1.1.9 | |||
| ScienaCesCfmGlobalSyntheticLossMeasurementStatsTxTotalSLM | 1.3.6.1.4.1.1271.2.3.4.1.1.9.1 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of synthetic loss messages transmitted. | ||||
| ScienaCesCfmGlobalSyntheticLossMeasurementStatsTxTotalSLR | 1.3.6.1.4.1.1271.2.3.4.1.1.9.2 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of synthetic loss replies transmitted. | ||||
| ScienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalSLM | 1.3.6.1.4.1.1271.2.3.4.1.1.9.3 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of synthetic loss messages received. | ||||
| ScienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalSLR | 1.3.6.1.4.1.1271.2.3.4.1.1.9.4 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of synthetic loss replies received. | ||||
| ScienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalValidSLM | 1.3.6.1.4.1.1271.2.3.4.1.1.9.5 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of valid synthetic loss messages received. | ||||
| ScienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalValidSLR | 1.3.6.1.4.1.1271.2.3.4.1.1.9.6 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of valid synthetic loss replies received. | ||||
| ScienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalInvalidSLM | 1.3.6.1.4.1.1271.2.3.4.1.1.9.7 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of invalid synthetic loss messages received. | ||||
| ScienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalInvalidSLR | 1.3.6.1.4.1.1271.2.3.4.1.1.9.8 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of invalid synthetic loss replies received. | ||||
| ScienaCesCfmGlobalSyntheticLossMeasurementStatsRxDropSLM | 1.3.6.1.4.1.1271.2.3.4.1.1.9.9 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of synthetic loss messages dropped due to lack of responder resources. | ||||
| NcienaCesCfmServiceStats | 1.3.6.1.4.1.1271.2.3.4.1.2 | |||
| TcienaCesCfmServiceStatsTable | 1.3.6.1.4.1.1271.2.3.4.1.2.1 | NA | ||
table · not-accessible · current The (conceptual) table listing the statistics for a given CFM service. | ||||
| RcienaCesCfmServiceStatsEntry | 1.3.6.1.4.1.1271.2.3.4.1.2.1.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the CienaCesCfmServiceTable. | ||||
| CcienaCesCfmServiceStatsTotalTx | 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.1 | Counter64 | RO | |
column · Counter64 · read-only · current The total CFM frames sent for the service. | ||||
| CcienaCesCfmServiceStatsTotalRx | 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current The total CFM frames received for the service. | ||||
| CcienaCesCfmServiceStatsTotalTxLTM | 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of linktrace messages transmitted for the CFM service. | ||||
| CcienaCesCfmServiceStatsTotalTxLTR | 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of linktrace replies transmitted for the CFM service. | ||||
| CcienaCesCfmServiceStatsTotalRxLTM | 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of link trace messages received for the CFM service. | ||||
| CcienaCesCfmServiceStatsTotalRxLTR | 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of linktrace replies received for the CFM service. | ||||
| CcienaCesCfmServiceStatsTotalRxUnexpectedLTR | 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of unexpected linktrace replies received for the CFM service. | ||||
| CcienaCesCfmServiceStatsTotalTxLBM | 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of loopback messages transmitted for the CFM service. | ||||
| CcienaCesCfmServiceStatsTotalTxLBR | 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of loopback replies transmitted for the CFM service. | ||||
| CcienaCesCfmServiceStatsTotalRxLBM | 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of loopback messages received for the CFM service. | ||||
| CcienaCesCfmServiceStatsTotalRxInorderLBR | 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of in-order loopback replies received. | ||||
| CcienaCesCfmServiceStatsTotalRxOutOforderLBR | 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of out-of-order loopback replies received. | ||||
| CcienaCesCfmServiceStatsTotalRxContentMismatchLBR | 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of content mismatched loopback replies received. | ||||
| CcienaCesCfmServiceStatsTotalRxUnexpectedLBR | 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of unexpectecd loopback replies received. | ||||
| CcienaCesCfmServiceStatsClear | 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.15 | CienaStatsClear | RW | |
column · CienaStatsClear · read-write · current To clear statistics for a given service, set this object to clear(1). During GET this object returns none(0) | ||||
| NcienaCesCfmMepStats | 1.3.6.1.4.1.1271.2.3.4.1.3 | |||
| TcienaCesCfmMepStatsTable | 1.3.6.1.4.1.1271.2.3.4.1.3.1 | NA | ||
table · not-accessible · current The (conceptual) table listing the configuration parameters for the CFM MEP table. | ||||
| RcienaCesCfmMepStatsEntry | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the cienaCesCfmMepStatsTable. | ||||
| CcienaCesCfmMepInterfaceType | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.1 | CienaCesCfmInterfaceType | RO | |
column · CienaCesCfmInterfaceType · read-only · current This object is used as the index in the table and indicates the MEP interface for the given service. | ||||
| CcienaCesCfmMepInterfaceIndex | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object is used as the index in the table and indicates the MEP interface index for the given service. | ||||
| CcienaCesCfmMepStatsTxTotalCCM | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of CCM messages transmitted by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxTotalCCM | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of CCM messages received by the CFM MEP. | ||||
| CcienaCesCfmMepStatsTxLoopbackMessages | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of loopback messages transmitted by the CFM MEP. | ||||
| CcienaCesCfmMepStatsTxLoopbackReply | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of loopback replies transmitted by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxLoopbackMessages | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of loopback messages received by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxInorderLoopbackReply | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of in-order loopback replies received by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxOutoforderLoopbackReply | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of out-of-order loopback replies received by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxContentMismatchLoopbackReply | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of content mismatched loopback replies received by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxUnexpectedLoopbackReply | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of unexpected loopback replies received by the CFM MEP. | ||||
| CcienaCesCfmMepStatsTxLinktraceMessage | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of linktrace messages transmitted by the CFM MEP. | ||||
| CcienaCesCfmMepStatsTxLinktraceReply | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of linktrace replies transmitted by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxLinktraceMessage | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of linktrace messages received by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxLinktraceReply | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.15 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of linktrace replies received by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxUnexpectedLinktraceReply | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.16 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of unexpected linktrace replies received by the CFM MEP. | ||||
| CcienaCesCfmMepStatsTxDelayMeasurementMessage | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.17 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of DMM messages transmitted by the CFM MEP. | ||||
| CcienaCesCfmMepStatsTxDelayMeasurementReply | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.18 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of DMM replies transmitted by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxDelayMeasurementMessage | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.19 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of DMM messages received by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxDelayMeasurementReply | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.20 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of DMM replies received by the CFM MEP. | ||||
| CcienaCesCfmMepStatsTxLossMeasurementMessage | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.21 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of LMM messages transmitted by the CFM MEP. | ||||
| CcienaCesCfmMepStatsTxLossMeasurementReply | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.22 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of LMM replies transmitted by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxLossMeasurementMessage | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.23 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of LMM messages received by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxLossMeasurementReply | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.24 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of LMM replies received by the CFM MEP. | ||||
| CcienaCesCfmMepStatsLastLBMTargetRemoteMepId | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.25 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the remote MEP ID of the last loopback message. | ||||
| CcienaCesCfmMepStatsLastLBMTargetMacAddress | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.26 | CienaMacAddress | RO | |
column · CienaMacAddress · read-only · current This object indicates the target MAC address for the last loopback message. | ||||
| CcienaCesCfmMepStatsLastLBMPriority | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.27 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the last loopback message priority. | ||||
| CcienaCesCfmMepStatsLastLBMCount | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.28 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the last loopback message count. | ||||
| CcienaCesCfmMepStatsLastLBMFirstSeqNum | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.29 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the last loopback message first sequence number. | ||||
| CcienaCesCfmMepStatsLastLTMTargetRemoteMepId | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.30 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the last linktrace message target remote MEP ID. | ||||
| CcienaCesCfmMepStatsLastLTMTargetMacAddress | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.31 | CienaMacAddress | RO | |
column · CienaMacAddress · read-only · current This object indicates the target MAC address of the the last linktrace message. | ||||
| CcienaCesCfmMepStatsLastLTMPriority | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.32 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the last linktrace message priority of the CFM MEP. | ||||
| CcienaCesCfmMepStatsLastLTMSeqNum | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.33 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the last linktrace message sequence number of the CFM MEP. | ||||
| CcienaCesCfmMepStatsLastLTMInitialTTL | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.34 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the last linktrace message initial TTL of the CFM MEP. | ||||
| CcienaCesCfmMepStatsLastDMMTargetRemoteMepId | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.35 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the last DMM target remote MEP ID for the CFM MEP. | ||||
| CcienaCesCfmMepStatsLastDMMTargetMacAddress | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.36 | CienaMacAddress | RO | |
column · CienaMacAddress · read-only · current This object indicates the last DMM target MAC address for the CFM MEP. | ||||
| CcienaCesCfmMepStatsLastDMMPriority | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.37 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the last DMM priority for the CFM MEP. | ||||
| CcienaCesCfmMepStatsLastDMMRepeatInterval | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.38 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the last DMM repeat interval for the CFM MEP. | ||||
| CcienaCesCfmMepStatsLastDMMNumOfDmmToSend | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.39 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the number of DMMs to send for the last DMM for the CFM MEP. | ||||
| CcienaCesCfmMepStatsLastLMMTargetRemoteMepId | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.40 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the last LMM target remote MEP ID for the CFM MEP. | ||||
| CcienaCesCfmMepStatsLastLMMTargetMacAddress | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.41 | CienaMacAddress | RO | |
column · CienaMacAddress · read-only · current This object indicates the last LMM target MAC Address for the CFM MEP. | ||||
| CcienaCesCfmMepStatsLastLMMPriority | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.42 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the last LMM priority for the CFM MEP. | ||||
| CcienaCesCfmMepStatsLastLMMRepeatInterval | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.43 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the last LMM repeat interval for the CFM MEP. | ||||
| CcienaCesCfmMepStatsLastLMMNumOfLmmToSend | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.44 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the number of LMMs to send for the last LMM for the CFM MEP. | ||||
| CcienaCesCfmMepStatsNextLBMSeqNumber | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.45 | Counter32 | RO | |
column · Counter32 · read-only · current This object indicates the next LBM sequence number received on the given service and port. | ||||
| CcienaCesCfmMepStatsNextLTMSeqNumber | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.46 | Counter32 | RO | |
column · Counter32 · read-only · current This object indicates the next LTM sequence number received on the given service and port. | ||||
| CcienaCesCfmMepStatsTxSyntheticLossMeasurementMessage | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.47 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of synthetic loss messages transmitted by the CFM MEP. | ||||
| CcienaCesCfmMepStatsTxSyntheticLossMeasurementReply | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.48 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of synthetic loss replies transmitted by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxSyntheticLossMeasurementMessage | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.49 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of synthetic loss messages received by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxSyntheticLossMeasurementReply | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.50 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of synthetic loss replies received by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxValidSyntheticLossMeasurementMessage | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.51 | Counter64 | RO | |
column · Counter64 · read-only · current The total number valid of synthetic loss messages received by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxValidSyntheticLossMeasurementReply | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.52 | Counter64 | RO | |
column · Counter64 · read-only · current The total number valid of synthetic loss replies received by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxInvalidSyntheticLossMeasurementMessage | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.53 | Counter64 | RO | |
column · Counter64 · read-only · current The total number invalid of synthetic loss messages received by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxInvalidSyntheticLossMeasurementReply | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.54 | Counter64 | RO | |
column · Counter64 · read-only · current The total number invalid of synthetic loss replies received by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxCCMWithErrorCCMFault | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.55 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of CCMs with Error CCM fault received by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxCCMWithXCONFault | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.56 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of CCMs with XCON fault received by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxCCMWithRMEPLOCFault | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.57 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of CCMs with RMEP LOC fault received by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxCCMWithRDI0 | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.58 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of CCMs with RDI bit 0 received by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxCCMWithRDI1 | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.59 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of CCMs with RDI bit set received by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxCCMWithSequenceNumberMismatch | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.60 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of CCMs with sequence number mismatch received by the CFM MEP. | ||||
| CcienaCesCfmMepStatsRxCCMDroppedWithMalformedTlv | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.61 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of CCMs received by the CFM MEP which were dropped because of malformed TLV. | ||||
| CcienaCesCfmMepStatsToTxLoopbackMessages | 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.62 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of loopback messages left to be transmitted by the CFM MEP. | ||||
| TcienaCesCfmRemoteMepStatsTable | 1.3.6.1.4.1.1271.2.3.4.1.3.2 | NA | ||
table · not-accessible · current The (conceptual) table listing the configuration parameters for the CFM remote MEP table. | ||||
| RcienaCesCfmRemoteMepStatsEntry | 1.3.6.1.4.1.1271.2.3.4.1.3.2.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the cienaCesCfmMepStatsTable. | ||||
| CcienaCesCfmRemoteMepStatsRxTotalCCM | 1.3.6.1.4.1.1271.2.3.4.1.3.2.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current This object is used to show the number of MEP CCM frames received. | ||||
| CcienaCesCfmRemoteMepStatsLastSeqNum | 1.3.6.1.4.1.1271.2.3.4.1.3.2.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object is used to show the last sequence number. | ||||
| CcienaCesCfmRemoteMepStatsCCMSeqErrors | 1.3.6.1.4.1.1271.2.3.4.1.3.2.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object is used to show the number of MEP CCM frames sequence errors. | ||||
| CcienaCesCfmRemoteMepStatsClear | 1.3.6.1.4.1.1271.2.3.4.1.3.2.1.4 | CienaStatsClear | RW | |
column · CienaStatsClear · read-write · current Setting this object to clear(1) resets the statistics for the remote MEP for this service. | ||||
Textual conventions
CfmDisplayStringOCTET STRING (SIZE (1..2))Display hint:
1x:Specifies the CFM display string.
CfmFrameLossRatioUnsigned32 (0..1000000)Display hint:
d-4Denotes Frame Loss Ratio in accuracy of four digits. So a value of 1000 here would mean 0.1% loss.
CienaCesCfmInterfaceTypeINTEGERdecapPbt(3)encapPbt(2)mplsVc(5)pbtService(4)subport(1)unknown(99)Interface type of the PM instance.
EthTypeOCTET STRING (SIZE (1..2))Display hint:
1x:Specifies the Ethertype.
Traps / Notifications
- cienaCesCfmAverageDelayFaultTrapClear
1.3.6.1.4.1.1271.2.2.5.0.4 - cienaCesCfmAverageDelayFaultTrapSet
1.3.6.1.4.1.1271.2.2.5.0.3 - cienaCesCfmAverageDelayVariationTrapClear
1.3.6.1.4.1.1271.2.2.5.0.20 - cienaCesCfmAverageDelayVariationTrapSet
1.3.6.1.4.1.1271.2.2.5.0.19 - cienaCesCfmAverageJitterTrapClear
1.3.6.1.4.1.1271.2.2.5.0.8 - cienaCesCfmAverageJitterTrapSet
1.3.6.1.4.1.1271.2.2.5.0.7 - cienaCesCfmFaultTrapClear
1.3.6.1.4.1.1271.2.2.5.0.2 - cienaCesCfmFaultTrapSet
1.3.6.1.4.1.1271.2.2.5.0.1 - cienaCesCfmFrameLossFarTrapClear
1.3.6.1.4.1.1271.2.2.5.0.14 - cienaCesCfmFrameLossFarTrapSet
1.3.6.1.4.1.1271.2.2.5.0.13 - cienaCesCfmFrameLossNearTrapClear
1.3.6.1.4.1.1271.2.2.5.0.12 - cienaCesCfmFrameLossNearTrapSet
1.3.6.1.4.1.1271.2.2.5.0.11 - cienaCesCfmMaximumDelayFaultTrapClear
1.3.6.1.4.1.1271.2.2.5.0.6 - cienaCesCfmMaximumDelayFaultTrapSet
1.3.6.1.4.1.1271.2.2.5.0.5 - cienaCesCfmMaximumDelayVariationTrapClear
1.3.6.1.4.1.1271.2.2.5.0.22 - cienaCesCfmMaximumDelayVariationTrapSet
1.3.6.1.4.1.1271.2.2.5.0.21 - cienaCesCfmMaximumJitterTrapClear
1.3.6.1.4.1.1271.2.2.5.0.10 - cienaCesCfmMaximumJitterTrapSet
1.3.6.1.4.1.1271.2.2.5.0.9 - cienaCesCfmSyntheticLossSessionSignalDegradeFaultTrapClear
1.3.6.1.4.1.1271.2.2.5.0.24 - cienaCesCfmSyntheticLossSessionSignalDegradeFaultTrapSet
1.3.6.1.4.1.1271.2.2.5.0.23 - cienaCesSyntheticLossSessionFarFaultClearTrap
1.3.6.1.4.1.1271.2.2.5.0.18 - cienaCesSyntheticLossSessionFarFaultTrap
1.3.6.1.4.1.1271.2.2.5.0.16 - cienaCesSyntheticLossSessionNearFaultClearTrap
1.3.6.1.4.1.1271.2.2.5.0.17 - cienaCesSyntheticLossSessionNearFaultTrap
1.3.6.1.4.1.1271.2.2.5.0.15