CIENA-CES-ACL-MIB
Ciena CorporationThis module defines the ACL details and the associated notifications.
snmptranslate -m CIENA-CES-ACL-MIB -Tpsnmpwalk -v2c -c <community> -m CIENA-CES-ACL-MIB <host> 1.3.6.1.4.1.1271.2.1.25Imports
| CIENA-SMI | cienaCesConfig |
|---|---|
| CIENA-TC | CienaGlobalState |
| INET-ADDRESS-MIB | InetAddress, InetAddressPrefixLength, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IcienaCesAclMIB | 1.3.6.1.4.1.1271.2.1.25 | |||
identity This module defines the ACL details and the associated notifications. | ||||
| NcienaCesAclMIBObjects | 1.3.6.1.4.1.1271.2.1.25.1 | |||
| NcienaCesAclGlobal | 1.3.6.1.4.1.1271.2.1.25.1.1 | |||
| ScienaCesAclAdminState | 1.3.6.1.4.1.1271.2.1.25.1.1.1 | CienaGlobalState | RO | |
scalar · CienaGlobalState · read-only · current This object indicates the global IP ACL state. | ||||
| ScienaCesAclCacheHit | 1.3.6.1.4.1.1271.2.1.25.1.1.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current This object indicates the number of lookups satisfied by a cache hit. | ||||
| ScienaCesAclNoHit | 1.3.6.1.4.1.1271.2.1.25.1.1.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current This object indicates the number of lookups that failed because the source ip address did not match a table entry. | ||||
| ScienaCesAclBadPort | 1.3.6.1.4.1.1271.2.1.25.1.1.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current This object indicates the number of lookups that failed because the ingress port was disallowed by a table entry. | ||||
| ScienaCesAclBadDscp | 1.3.6.1.4.1.1271.2.1.25.1.1.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current This object indicates the number of lookups that failed because the ingress DSCP value was disallowed by a table entry. | ||||
| ScienaCesAclOperState | 1.3.6.1.4.1.1271.2.1.25.1.1.6 | CienaGlobalState | RO | |
scalar · CienaGlobalState · read-only · current This object indicates the current operational state of the IP ACL system. | ||||
| ScienaCesAclInUseEntries | 1.3.6.1.4.1.1271.2.1.25.1.1.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current This object indicates the number of IP ACL rules that are currently configured. | ||||
| ScienaCesAclMaxEntries | 1.3.6.1.4.1.1271.2.1.25.1.1.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current This object indicates the maximum number of IP ACL rules that can be configured. | ||||
| ScienaCesAclBadProtocol | 1.3.6.1.4.1.1271.2.1.25.1.1.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current This object indicates the number of lookups that failed because protocol didn't match protocol allowed for matching src/dst subnet | ||||
| NcienaCesAclRules | 1.3.6.1.4.1.1271.2.1.25.1.2 | |||
| TcienaCesAclTable | 1.3.6.1.4.1.1271.2.1.25.1.2.1 | NA | deprecated | |
table · not-accessible · deprecated The (conceptual) table listing the parameters for the IP ACL table. | ||||
| RcienaCesAclEntry | 1.3.6.1.4.1.1271.2.1.25.1.2.1.1 | NA | deprecated | |
row · not-accessible · deprecated An entry (conceptual row) in the cienaCesAclTable. | ||||
| CcienaCesAclEntryInetAddrType | 1.3.6.1.4.1.1271.2.1.25.1.2.1.1.1 | InetAddressType | NA | deprecated |
column · InetAddressType · not-accessible · deprecated This object indicates the IP network type which will be authorized.
This OID specifies the Inet address type of the OIDs
cienaCesAclEntryInetAddr and cienaCesAclEntryInetPrefixLength.
When representing:
ipv4 : cienaCesAclEntryInetAddr should be compliant with
InetAddressIPv4 from RFC 4001
ipv6 : cienaCesAclEntryInetAddr should be compliant with
InetAddressIPv6 from RFC 4001 | ||||
| CcienaCesAclEntryInetAddr | 1.3.6.1.4.1.1271.2.1.25.1.2.1.1.2 | InetAddress | RO | deprecated |
column · InetAddress · read-only · deprecated This object indicates the source IP network address that will be authorized. This OID should be used in conjunction with cienaCesAclEntryInetAddrType and should be compliant with RFC 4001 InetAddressType. | ||||
| CcienaCesAclEntryInetPrefixLength | 1.3.6.1.4.1.1271.2.1.25.1.2.1.1.3 | InetAddressPrefixLength | NA | deprecated |
column · InetAddressPrefixLength · not-accessible · deprecated This object indicates the prefix length for the source IP network that will be authorized. This OID should be used in conjunction with cienaCesAclEntryInetAddrType. | ||||
| CcienaCesAclEntryHits | 1.3.6.1.4.1.1271.2.1.25.1.2.1.1.4 | Counter32 | RO | deprecated |
column · Counter32 · read-only · deprecated This object indicates the number of lookups that matched the table entry. | ||||
| CcienaCesAclEntryBadPort | 1.3.6.1.4.1.1271.2.1.25.1.2.1.1.5 | Counter32 | RO | deprecated |
column · Counter32 · read-only · deprecated This object indicates the number of lookups that failed because the ingress port was disallowed by the table entry. | ||||
| CcienaCesAclEntryDscpMask | 1.3.6.1.4.1.1271.2.1.25.1.2.1.1.6 | OCTET STRING (SIZE (8)) | RO | deprecated |
column · OCTET STRING (SIZE (8)) · read-only · deprecated This object indicates the DSCP values for which IP packets are allowed to ingress. The mask is big endian and each bit, numbered from 0 to 63, represents a DSCP value numbered from 0 to 63. A value of 0xFFFFFFFFFFFFFFFF may be used to specify all. | ||||
| CcienaCesAclEntryBadDscp | 1.3.6.1.4.1.1271.2.1.25.1.2.1.1.7 | Counter32 | RO | deprecated |
column · Counter32 · read-only · deprecated This object indicates the number of lookups that failed because the ingress DSCP value was disallowed by the table entry. | ||||
| CcienaCesAclEntryPortBitMask | 1.3.6.1.4.1.1271.2.1.25.1.2.1.1.8 | OCTET STRING (SIZE (8)) | RO | deprecated |
column · OCTET STRING (SIZE (8)) · read-only · deprecated This object indicates the physical ports on which frames will be allowed to ingress from. The mask is big endian and each bit, numbered from 0 to 63, represents a physical port numbered from 1 to 64. A value of 0xFFFFFFFFFFFFFFFF may be used to specify all ports. | ||||
| CcienaCesAclEntryNotifInetAddrType | 1.3.6.1.4.1.1271.2.1.25.1.2.1.1.9 | InetAddressType | RO | deprecated |
column · InetAddressType · read-only · deprecated This object indicates the IP network type which will be authorized. This OID specifies the Inet address type of the OIDs cienaCesAclEntryNotifInetAddr and cienaCesAclEntryNotifInetPrefixLength. When representing: ipv4 : cienaCesAclEntryInetAddr should be compliant with InetAddressIPv4 from RFC 4001 ipv6 : cienaCesAclEntryInetAddr should be compliant with InetAddressIPv6 from RFC 4001 | ||||
| CcienaCesAclEntryNotifInetAddr | 1.3.6.1.4.1.1271.2.1.25.1.2.1.1.10 | InetAddress | RO | deprecated |
column · InetAddress · read-only · deprecated This object indicates the IP network address that will be authorized. This OID should be used in conjunction with cienaCesAclEntryNotifInetAddrType and should be compliant with RFC 4001 InetAddressType. | ||||
| CcienaCesAclEntryNotifInetPrefixLength | 1.3.6.1.4.1.1271.2.1.25.1.2.1.1.11 | InetAddressPrefixLength | RO | deprecated |
column · InetAddressPrefixLength · read-only · deprecated This object indicates the prefix length for the IP network that will be authorized. This OID should be used in conjunction with cienaCesAclEntryNotifInetAddrType. | ||||
| TcienaCesExtAclTable | 1.3.6.1.4.1.1271.2.1.25.1.2.2 | NA | ||
table · not-accessible · current The (conceptual) table listing the parameters for the extended IP ACL table. | ||||
| RcienaCesExtAclEntry | 1.3.6.1.4.1.1271.2.1.25.1.2.2.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the cienaCesExtAclTable. | ||||
| CcienaCesExtAclEntrySrcInetAddrType | 1.3.6.1.4.1.1271.2.1.25.1.2.2.1.1 | InetAddressType | NA | |
column · InetAddressType · not-accessible · current This object indicates the IP network type which will be authorized.
This OID specifies the Inet address type of the OIDs
cienaCesExtAclEntrySrcInetAddr and
cienaCesExtAclEntrySrcInetPrefixLen.
When representing:
ipv4 : cienaCesExtAclEntrySrcInetAddr should be compliant with
InetAddressIPv4 from RFC 4001
ipv6 : cienaCesExtAclEntrySrcInetAddr should be compliant with
InetAddressIPv6 from RFC 4001 | ||||
| CcienaCesExtAclEntrySrcInetAddr | 1.3.6.1.4.1.1271.2.1.25.1.2.2.1.2 | InetAddress (SIZE (16)) | NA | |
column · InetAddress (SIZE (16)) · not-accessible · current This object indicates the source IP network address that will be authorized. This OID should be used in conjunction with cienaCesExtAclEntrySrcInetAddrType and should be compliant with RFC 4001 InetAddressType. | ||||
| CcienaCesExtAclEntrySrcInetPrefixLen | 1.3.6.1.4.1.1271.2.1.25.1.2.2.1.3 | InetAddressPrefixLength | NA | |
column · InetAddressPrefixLength · not-accessible · current This object indicates the prefix length for the source IP network that will be authorized. This OID should be used in conjunction with cienaCesExtAclEntrySrcInetAddrType. | ||||
| CcienaCesExtAclEntryDstInetAddrType | 1.3.6.1.4.1.1271.2.1.25.1.2.2.1.4 | InetAddressType | NA | |
column · InetAddressType · not-accessible · current This object indicates the IP network type which will be authorized.
This OID specifies the Inet address type of the OIDs
cienaCesExtAclEntryDstInetAddr and
cienaCesExtAclEntryDstInetPrefixLen.
When representing:
ipv4 : cienaCesExtAclEntryDstInetAddr should be compliant with
InetAddressIPv4 from RFC 4001
ipv6 : cienaCesExtAclEntryDstInetAddr should be compliant with
InetAddressIPv6 from RFC 4001 | ||||
| CcienaCesExtAclEntryDstInetAddr | 1.3.6.1.4.1.1271.2.1.25.1.2.2.1.5 | InetAddress (SIZE (16)) | NA | |
column · InetAddress (SIZE (16)) · not-accessible · current This object indicates the destination IP network address that will be authorized. This OID should be used in conjunction with cienaCesExtAclEntryDstInetAddrType and should be compliant with RFC 4001 InetAddressType. | ||||
| CcienaCesExtAclEntryDstInetPrefixLen | 1.3.6.1.4.1.1271.2.1.25.1.2.2.1.6 | InetAddressPrefixLength | NA | |
column · InetAddressPrefixLength · not-accessible · current This object indicates the prefix length for the destination IP network that will be authorized. This OID should be used in conjunction with cienaCesExtAclEntryDstInetAddrType. | ||||
| CcienaCesExtAclEntryNotifSrcInetAddrType | 1.3.6.1.4.1.1271.2.1.25.1.2.2.1.7 | InetAddressType | RO | |
column · InetAddressType · read-only · current Duplicate of cienaCesExtAclEntrySrcInetAddrType for display purposes.
This object indicates the IP network type which will be authorized.
This OID specifies the Inet address type of the OIDs
cienaCesExtAclEntrySrcInetAddr and
cienaCesExtAclEntrySrcInetPrefixLen.
When representing:
ipv4 : cienaCesExtAclEntrySrcInetAddr should be compliant with
InetAddressIPv4 from RFC 4001
ipv6 : cienaCesExtAclEntrySrcInetAddr should be compliant with
InetAddressIPv6 from RFC 4001 | ||||
| CcienaCesExtAclEntryNotifSrcInetAddr | 1.3.6.1.4.1.1271.2.1.25.1.2.2.1.8 | InetAddress | RO | |
column · InetAddress · read-only · current Duplicate of cienaCesExtAclEntrySrcInetAddr for display purposes. This object indicates the source IP network address that will be authorized. This OID should be used in conjunction with cienaCesExtAclEntryNotifSrcInetAddrType and should be compliant with RFC 4001 InetAddressType. | ||||
| CcienaCesExtAclEntryNotifSrcInetPrefixLen | 1.3.6.1.4.1.1271.2.1.25.1.2.2.1.9 | InetAddressPrefixLength | RO | |
column · InetAddressPrefixLength · read-only · current Duplicate of cienaCesExtAclEntrySrcInetPrefixLen for display purposes. This object indicates the prefix length for the source IP network that will be authorized. This OID should be used in conjunction with cienaCesExtAclEntryNotifSrcInetAddrType. | ||||
| CcienaCesExtAclEntryNotifDstInetAddrType | 1.3.6.1.4.1.1271.2.1.25.1.2.2.1.10 | InetAddressType | RO | |
column · InetAddressType · read-only · current Duplicate of cienaCesExtAclEntryDstInetAddrType for display purposes.
This object indicates the IP network type which will be authorized.
This OID specifies the Inet address type of the OIDs
cienaCesExtAclEntryNotifDstInetAddr and
cienaCesExtAclEntryNotifDstInetPrefixLen.
When representing:
ipv4 : cienaCesExtAclEntryNotifDstInetAddr should be compliant with
InetAddressIPv4 from RFC 4001
ipv6 : cienaCesExtAclEntryNotifDstInetAddr should be compliant with
InetAddressIPv6 from RFC 4001 | ||||
| CcienaCesExtAclEntryNotifDstInetAddr | 1.3.6.1.4.1.1271.2.1.25.1.2.2.1.11 | InetAddress | RO | |
column · InetAddress · read-only · current Duplicate of cienaCesExtAclEntryDstInetAddr for display purposes. This object indicates the destination IP network address that will be authorized. This OID should be used in conjunction with cienaCesExtAclEntryNotifDstInetAddrType and should be compliant with RFC 4001 InetAddressType. | ||||
| CcienaCesExtAclEntryNotifDstInetPrefixLen | 1.3.6.1.4.1.1271.2.1.25.1.2.2.1.12 | InetAddressPrefixLength | RO | |
column · InetAddressPrefixLength · read-only · current Duplicate of cienaCesExtAclEntryDstInetPrefixLen for display purposes. This object indicates the prefix length for the destination IP network that will be authorized. This OID should be used in conjunction with cienaCesExtAclEntryNotifDstInetAddrType. | ||||
| CcienaCesExtAclEntryHits | 1.3.6.1.4.1.1271.2.1.25.1.2.2.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current This object indicates the number of lookups that matched the table entry. | ||||
| CcienaCesExtAclEntryBadPort | 1.3.6.1.4.1.1271.2.1.25.1.2.2.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current This object indicates the number of lookups that failed because the ingress port was disallowed by the table entry. | ||||
| CcienaCesExtAclEntryDscpMask | 1.3.6.1.4.1.1271.2.1.25.1.2.2.1.15 | OCTET STRING (SIZE (8)) | RO | |
column · OCTET STRING (SIZE (8)) · read-only · current This object indicates the DSCP values for which IP packets are allowed to ingress. The mask is big endian and each bit, numbered from 0 to 63, represents a DSCP value numbered from 0 to 63. A value of 0xFFFFFFFFFFFFFFFF may be used to specify all. | ||||
| CcienaCesExtAclEntryBadDscp | 1.3.6.1.4.1.1271.2.1.25.1.2.2.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current This object indicates the number of lookups that failed because the ingress DSCP value was disallowed by the table entry. | ||||
| CcienaCesExtAclEntryPortBitMask | 1.3.6.1.4.1.1271.2.1.25.1.2.2.1.17 | OCTET STRING (SIZE (8)) | RO | |
column · OCTET STRING (SIZE (8)) · read-only · current This object indicates the physical ports on which frames will be allowed to ingress from. The mask is big endian and each bit, numbered from 0 to 63, represents a physical port numbered from 1 to 64. A value of 0xFFFFFFFFFFFFFFFF may be used to specify all ports. | ||||
| CcienaCesExtAclEntryProtocol | 1.3.6.1.4.1.1271.2.1.25.1.2.2.1.18 | Bits | RO | |
column · Bits · read-only · current List of protocols allowed for the ACL entry.
| ||||
| CcienaCesExtAclEntryBadProtocol | 1.3.6.1.4.1.1271.2.1.25.1.2.2.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current This object indicates the number of lookups that failed because the protocol value did't match what was in the ACL entry with IP address(es) matching | ||||
| NcienaCesAclMIBConformance | 1.3.6.1.4.1.1271.2.1.25.3 | |||
| NcienaCesAclMIBCompliances | 1.3.6.1.4.1.1271.2.1.25.3.1 | |||
| NcienaCesAclMIBGroups | 1.3.6.1.4.1.1271.2.1.25.3.2 | |||