CIENA-6500R-INVENTORY-AMPS-MIB
Ciena CorporationThis modules describes Ciena's photonic amplifier object.
snmptranslate -m CIENA-6500R-INVENTORY-AMPS-MIB -Tpsnmpwalk -v2c -c <community> -m CIENA-6500R-INVENTORY-AMPS-MIB <host> 1.3.6.1.4.1.1271.4.1.1.1.2.1Imports
| CIENA-6500R-INVENTORY-MIB | rlsInventoryAmps |
|---|---|
| CIENA-6500R-TYPES-MIB | AdminState, OrlState |
| CIENA-PRO-TYPES-MIB | DisplayString128, DisplayString32 |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IcienaRlsInventoryAmpsMIB | 1.3.6.1.4.1.1271.4.1.1.1.2.1 | ||||||||||||||||
identity This modules describes Ciena's photonic amplifier object. | |||||||||||||||||
| TrlsInventoryAmpsTable | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1 | NA | |||||||||||||||
| RrlsInventoryAmpsEntry | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1 | NA | |||||||||||||||
row · not-accessible · current | |||||||||||||||||
| CrlsInventoryAmpsSlotName | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.1 | DisplayString32 | NA | ||||||||||||||
column · DisplayString32 · not-accessible · current The name of the slot. | |||||||||||||||||
| CrlsInventoryAmpsName | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.2 | DisplayString128 | NA | ||||||||||||||
column · DisplayString128 · not-accessible · current Amplifier name. | |||||||||||||||||
| CrlsInventoryAmpsAmpMode | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.3 | INTEGER | RO | gainclamp(3) | |||||||||||||
column · INTEGER · read-only · current Control Mode of the AMP.
Example values from LibreNMS test devices
| |||||||||||||||||
| CrlsInventoryAmpsState | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.4 | INTEGER | RO | normal(3) | |||||||||||||
column · INTEGER · read-only · current State the amp is in reported by the card.
Example values from LibreNMS test devices
| |||||||||||||||||
| CrlsInventoryAmpsGainMode | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.5 | INTEGER | RO | low(1) | |||||||||||||
column · INTEGER · read-only · current Gain Mode of the AMP.
Example values from LibreNMS test devices
| |||||||||||||||||
| CrlsInventoryAmpsForcedShutdown | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.6 | INTEGER | RO | disabled(1) | |||||||||||||
column · INTEGER · read-only · current Forced EDFA Shutoff State.
Example values from LibreNMS test devices
| |||||||||||||||||
| CrlsInventoryAmpsTargetGain | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.7 | DisplayString32 | RO | ||||||||||||||
column · DisplayString32 · read-only · current Target Gain in dB. | |||||||||||||||||
| CrlsInventoryAmpsBaselineTargetGain | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.8 | DisplayString32 | RO | ||||||||||||||
column · DisplayString32 · read-only · current Target Gain baseline in dB. | |||||||||||||||||
| CrlsInventoryAmpsBaselineTimestamp | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.9 | DisplayString32 | RO | ||||||||||||||
column · DisplayString32 · read-only · current Time stamp for target gain baseline. | |||||||||||||||||
| CrlsInventoryAmpsTargetGainRangesLowMin | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.10 | DisplayString32 | RO | ||||||||||||||
| CrlsInventoryAmpsTargetGainRangesLowMax | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.11 | DisplayString32 | RO | ||||||||||||||
| CrlsInventoryAmpsTargetGainRangesHighMin | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.12 | DisplayString32 | RO | ||||||||||||||
| CrlsInventoryAmpsTargetGainRangesHighMax | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.13 | DisplayString32 | RO | ||||||||||||||
| CrlsInventoryAmpsTargetPower | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.14 | DisplayString32 | RO | ||||||||||||||
column · DisplayString32 · read-only · current Target Total Power in dBm.
| |||||||||||||||||
| CrlsInventoryAmpsTargetPowerRangesMin | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.15 | DisplayString32 | RO | ||||||||||||||
| CrlsInventoryAmpsTargetPowerRangesMax | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.16 | DisplayString32 | RO | ||||||||||||||
| CrlsInventoryAmpsTargetGainTilt | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.17 | DisplayString32 | RO | ||||||||||||||
column · DisplayString32 · read-only · current Gain tilt in dB.
| |||||||||||||||||
| CrlsInventoryAmpsTargetGainTiltRangesMin | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.18 | DisplayString32 | RO | ||||||||||||||
| CrlsInventoryAmpsTargetGainTiltRangesMax | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.19 | DisplayString32 | RO | ||||||||||||||
| CrlsInventoryAmpsShutoffThreshold | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.20 | DisplayString32 | RO | ||||||||||||||
column · DisplayString32 · read-only · current Shutoff Threshold in dBm.
| |||||||||||||||||
| CrlsInventoryAmpsShutoffThresholdRangesMin | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.21 | DisplayString32 | RO | ||||||||||||||
| CrlsInventoryAmpsShutoffThresholdRangesMax | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.22 | DisplayString32 | RO | ||||||||||||||
| CrlsInventoryAmpsShutoffHysteresis | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.23 | DisplayString32 | RO | ||||||||||||||
column · DisplayString32 · read-only · current Shutoff Hysteresis in dBm.
| |||||||||||||||||
| CrlsInventoryAmpsInputLosThreshold | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.24 | DisplayString32 | RO | -33.0 | |||||||||||||
column · DisplayString32 · read-only · current Threshold at which to declare input loss of signal in dBm.
Example values from LibreNMS test devices
| |||||||||||||||||
| CrlsInventoryAmpsInputLosThresholdRangesMin | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.25 | DisplayString32 | RO | ||||||||||||||
| CrlsInventoryAmpsInputLosThresholdRangesMax | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.26 | DisplayString32 | RO | ||||||||||||||
| CrlsInventoryAmpsInputLosHysteresis | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.27 | DisplayString32 | RO | ||||||||||||||
column · DisplayString32 · read-only · current Hysteresis at which to declare of clear the input loss of signal of signal alarm in dB.
| |||||||||||||||||
| CrlsInventoryAmpsOrlThreshold | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.28 | DisplayString32 | RO | 22.0 | |||||||||||||
column · DisplayString32 · read-only · current Threshold at which to declare the optical return loss alarm.
Example values from LibreNMS test devices
| |||||||||||||||||
| CrlsInventoryAmpsOrlThresholdRangesMin | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.29 | DisplayString32 | RO | ||||||||||||||
| CrlsInventoryAmpsOrlThresholdRangesMax | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.30 | DisplayString32 | RO | ||||||||||||||
| CrlsInventoryAmpsLowOrlHysteresis | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.31 | DisplayString32 | RO | ||||||||||||||
column · DisplayString32 · read-only · current Hysteresis at which to declare low optical return loss alarm in dB.
| |||||||||||||||||
| CrlsInventoryAmpsOrlState | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.32 | OrlState | RO | ||||||||||||||
column · OrlState · read-only · current The ORL State | |||||||||||||||||
| CrlsInventoryAmpsGainOffset | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.33 | DisplayString32 | RO | ||||||||||||||
column · DisplayString32 · read-only · current Gain Offset of the AMP in dB.
| |||||||||||||||||
| CrlsInventoryAmpsGainOffsetRangesMin | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.34 | DisplayString32 | RO | ||||||||||||||
| CrlsInventoryAmpsGainOffsetRangesMax | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.35 | DisplayString32 | RO | ||||||||||||||
| CrlsInventoryAmpsGain | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.36 | DisplayString32 | RO | ||||||||||||||
column · DisplayString32 · read-only · current The current gain of the amplifier in dB.
| |||||||||||||||||
| CrlsInventoryAmpsMaxTargetPower | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.37 | DisplayString32 | RO | ||||||||||||||
column · DisplayString32 · read-only · current Maximum Target Power in dBm.
| |||||||||||||||||
| CrlsInventoryAmpsMaxTargetPowerRangesMin | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.38 | DisplayString32 | RO | ||||||||||||||
| CrlsInventoryAmpsMaxTargetPowerRangesMax | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.39 | DisplayString32 | RO | ||||||||||||||
| CrlsInventoryAmpsAprThreshold | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.40 | DisplayString32 | RO | 17.0 | |||||||||||||
column · DisplayString32 · read-only · current Threshold at which the amplifier enters reduced power mode in dBm.
Example values from LibreNMS test devices
| |||||||||||||||||
| CrlsInventoryAmpsAprHysteresis | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.41 | DisplayString32 | RO | ||||||||||||||
column · DisplayString32 · read-only · current Hysteresis at which the amplifier enters reduced power mode in dB.
| |||||||||||||||||
| CrlsInventoryAmpsForceApr | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.42 | TruthValue | RO | ||||||||||||||
column · TruthValue · read-only · current Forced APR. | |||||||||||||||||
| CrlsInventoryAmpsAprPowerLevel | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.43 | DisplayString32 | RO | ||||||||||||||
column · DisplayString32 · read-only · current Power level of the amplifier when the EDFA is in Automatic Power Reduction mode in dBm.
| |||||||||||||||||
| CrlsInventoryAmpsOverloadThresholdsInputPsdLowGain | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.44 | DisplayString32 | RO | ||||||||||||||
| CrlsInventoryAmpsOverloadThresholdsInputPsdHighGain | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.45 | DisplayString32 | RO | ||||||||||||||
| CrlsInventoryAmpsAdminState | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.46 | AdminState | RO | ||||||||||||||
column · AdminState · read-only · current Resource administrative state. | |||||||||||||||||
| CrlsInventoryAmpsServiceState | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.47 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Service state of the amp.
| |||||||||||||||||
| CrlsInventoryAmpsInCurrPower | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.48 | DisplayString32 | RO | 3.1 | |||||||||||||
column · DisplayString32 · read-only · current Input power to the AMP in dBm.
Example values from LibreNMS test devices
| |||||||||||||||||
| CrlsInventoryAmpsInMinPower | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.49 | DisplayString32 | RO | 3.1 | |||||||||||||
column · DisplayString32 · read-only · current Minimum tidemarked input power to the AMP in dBm. This should be the min power measured since the last measuremnt request in dBm.
Example values from LibreNMS test devices
| |||||||||||||||||
| CrlsInventoryAmpsInMaxPower | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.50 | DisplayString32 | RO | 3.1 | |||||||||||||
column · DisplayString32 · read-only · current Maximum tidemarked input power to the AMP in dBm. This should be the max power measured since the last measuremnt request.
Example values from LibreNMS test devices
| |||||||||||||||||
| CrlsInventoryAmpsOutCurrPower | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.51 | DisplayString32 | RO | 23.0 | |||||||||||||
column · DisplayString32 · read-only · current Output power from the AMP in dBm.
Example values from LibreNMS test devices
| |||||||||||||||||
| CrlsInventoryAmpsOutMinPower | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.52 | DisplayString32 | RO | 23.0 | |||||||||||||
column · DisplayString32 · read-only · current Minimum tidemarked output power from the AMP in dBm. This should be the min power measured since the last measuremnt request.
Example values from LibreNMS test devices
| |||||||||||||||||
| CrlsInventoryAmpsOutMaxPower | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.53 | DisplayString32 | RO | 23.0 | |||||||||||||
column · DisplayString32 · read-only · current Maximum tidemarked output power from the AMP in dBm. This should be the max power measured since the last measuremnt request in dBm.
Example values from LibreNMS test devices
| |||||||||||||||||
| CrlsInventoryAmpsOpticalReturnLoss | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.54 | DisplayString32 | RO | 39.9 | |||||||||||||
column · DisplayString32 · read-only · current Optical return loss (ORL) is the amount of light that is reflected back up the fiber toward the source by light reflections off the interface of the polished end surface of the mated connectors and air, you should probably check you connection in dB
Example values from LibreNMS test devices
| |||||||||||||||||
| CrlsInventoryAmpsDiagnosticInputLossSignal | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.55 | TruthValue | RO | ||||||||||||||
column · TruthValue · read-only · current Input Loss of Signal. | |||||||||||||||||
| CrlsInventoryAmpsDiagnosticShutoffThresholdCrossed | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.56 | TruthValue | RO | ||||||||||||||
column · TruthValue · read-only · current Shutoff Threshold Crossed. | |||||||||||||||||
| CrlsInventoryAmpsDignosticAutomaticShutoff | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.57 | TruthValue | RO | ||||||||||||||
column · TruthValue · read-only · current Automatic Shutoff. | |||||||||||||||||
| CrlsInventoryAmpsDiagnosticAutomaticPowerReductionActive | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.58 | TruthValue | RO | ||||||||||||||
column · TruthValue · read-only · current Automatic Power Reduction Active. | |||||||||||||||||
| CrlsInventoryAmpsDignosticParentFailed | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.59 | TruthValue | RO | ||||||||||||||
column · TruthValue · read-only · current Parent Object Failed. | |||||||||||||||||
| CrlsInventoryAmpsDignosticOpticalLineFailed | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.60 | TruthValue | RO | ||||||||||||||
column · TruthValue · read-only · current Optical Line Failed. | |||||||||||||||||
| CrlsInventoryAmpsDignosticLowOpticalReturnLoss | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.61 | TruthValue | RO | ||||||||||||||
column · TruthValue · read-only · current Low Optical Return Loss. | |||||||||||||||||
| CrlsInventoryAmpsDignosticLossOfSignal | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.62 | TruthValue | RO | ||||||||||||||
column · TruthValue · read-only · current Loss of Signal. | |||||||||||||||||
| CrlsInventoryAmpsDignosticInputOpticalOverload | 1.3.6.1.4.1.1271.4.1.1.1.2.1.1.1.63 | TruthValue | RO | ||||||||||||||
column · TruthValue · read-only · current Input Optical Overload. | |||||||||||||||||