MWRM-UNIT-MIB
Giganet Ltdsnmptranslate -m MWRM-UNIT-MIB -Tpsnmpwalk -v2c -c <community> -m MWRM-UNIT-MIB <host> 1.3.6.1.4.1.2281Imports
| IF-MIB | ifIndex |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nmicrowave-radio | 1.3.6.1.4.1.2281 | ||||||||||||
| NgenEquip | 1.3.6.1.4.1.2281.10 | ||||||||||||
| NgenEquipUnit | 1.3.6.1.4.1.2281.10.1 | ||||||||||||
| NgenEquipUnitInfo | 1.3.6.1.4.1.2281.10.1.1 | ||||||||||||
| SgenEquipLastCfgTimeStamp | 1.3.6.1.4.1.2281.10.1.1.1 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory This parameter represents the configuration change counter. On every conf. change this counter is increased by 1. | |||||||||||||
| SgenEquipRealTimeandDate | 1.3.6.1.4.1.2281.10.1.1.2 | OCTET STRING (SIZE (8)) | RW | mandatory | |||||||||
scalar · OCTET STRING (SIZE (8)) · read-write · mandatory This parameter specifies the real time and date
Format 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal).
A date-time specification:
field octets contents range
----- ------ -------- -----
1 1-2 year 0..65536
2 3 month 1..12
3 4 day 1..31
4 5 hour 0..23
5 6 minutes 0..59
6 7 seconds 0..60
(use 60 for leap-second)
7 8 deci-seconds 0..9
For example, Tuesday May 26, 1992 at 1:30:15 PM EDT
would be displayed as: 07 c8 05 1a 0d 1e 0f 00
(1992 -5 -26, 13:30:15 ) | |||||||||||||
| SgenEquipPMGenTime | 1.3.6.1.4.1.2281.10.1.1.3 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory This value indicates the generation time of the Performance Monitor file. The value is presented in time_t format. | |||||||||||||
| SgenEquipInvGenTime | 1.3.6.1.4.1.2281.10.1.1.4 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory This value indicates the generation time of the Inventory information file. The inventory file holds the configuration information of the unit. The value is presented in time_t format. | |||||||||||||
| SgenEquipOperation | 1.3.6.1.4.1.2281.10.1.1.5 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Enables to perform HW reset to the indoor unit.
| |||||||||||||
| SgenEquipMIBVersion | 1.3.6.1.4.1.2281.10.1.1.6 | DisplayString | RO | mandatory | |||||||||
scalar · DisplayString · read-only · mandatory This value indicates MIB version. | |||||||||||||
| SgenEquipUnitCLLI | 1.3.6.1.4.1.2281.10.1.1.7 | DisplayString (SIZE (0..255)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (0..255)) · read-write · mandatory This value represents a general purpose CLLI-like text field. The CLLI field is attached to traps generated from this NE. | |||||||||||||
| SgenEquipUnitMeasurementSystem | 1.3.6.1.4.1.2281.10.1.1.8 | MetricImperial | RW | mandatory | |||||||||
scalar · MetricImperial · read-write · mandatory This value represents the measurement system used by the system. (metric or imperal). | |||||||||||||
| SgenEquipUnitIduTemperature | 1.3.6.1.4.1.2281.10.1.1.9 | INTEGER | RO | mandatory | 35 | ||||||||
scalar · INTEGER · read-only · mandatory This value indicates the IDU temperature, according to the measurement system chosen. (genEquipUnitMeasurementSystem) Example values from LibreNMS test devices
| |||||||||||||
| SgenEquipUnitIduVoltageInput | 1.3.6.1.4.1.2281.10.1.1.10 | INTEGER | RO | mandatory | 47 | ||||||||
scalar · INTEGER · read-only · mandatory Voltages Input. Example values from LibreNMS test devices
| |||||||||||||
| NgenEquipUnitInfoTime | 1.3.6.1.4.1.2281.10.1.1.11 | ||||||||||||
| SgenEquipUnitGMTHours | 1.3.6.1.4.1.2281.10.1.1.11.1 | INTEGER (-12..13) | RW | mandatory | |||||||||
scalar · INTEGER (-12..13) · read-write · mandatory This parameter represent the offset in hours from GMT. | |||||||||||||
| SgenEquipUnitGMTMins | 1.3.6.1.4.1.2281.10.1.1.11.2 | INTEGER (0..59) | RW | mandatory | |||||||||
scalar · INTEGER (0..59) · read-write · mandatory This parameter represents the offset in minutes from GMT. | |||||||||||||
| NgenEquipUnitInfoNTP | 1.3.6.1.4.1.2281.10.1.1.11.6 | ||||||||||||
| SgenEquipUnitInfoNTPAdmin | 1.3.6.1.4.1.2281.10.1.1.11.6.1 | EnableDisable | RW | mandatory | |||||||||
scalar · EnableDisable · read-write · mandatory This parameter represents the NTP Admin state | |||||||||||||
| SgenEquipUnitInfoNTPServerIP | 1.3.6.1.4.1.2281.10.1.1.11.6.2 | IpAddress | RW | mandatory | |||||||||
scalar · IpAddress · read-write · mandatory This parameter represents the IP address of the NTP Server | |||||||||||||
| SgenEquipUnitInfoNTPStatus | 1.3.6.1.4.1.2281.10.1.1.11.6.3 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory This parameter represents the NTP Service status
| |||||||||||||
| SgenEquipUnitInfoNTPSync | 1.3.6.1.4.1.2281.10.1.1.11.6.4 | DisplayString | RO | mandatory | |||||||||
scalar · DisplayString · read-only · mandatory This parameter returns the IP address of the NTP server, with which the system is currently synchronized. Returned strings: (i) - the IP address of the reference NTP server, according to IPv4/v6 format. (ii) - 'LOCAL' if synchronized on local clock. (iii) - 'N/A' if not synchronized. Valid only when admin is 'disabled'. | |||||||||||||
| SgenEquipUnitInfoNTPPollInterval | 1.3.6.1.4.1.2281.10.1.1.11.6.5 | INTEGER (64..1024) | RO | mandatory | |||||||||
scalar · INTEGER (64..1024) · read-only · mandatory This parameter represents the NTP polling interval in minutes | |||||||||||||
| TgenEquipUnitInfoNtpStatusTable | 1.3.6.1.4.1.2281.10.1.1.11.6.6 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table shows the status of the NTP (Network Time Protocol). | |||||||||||||
| RgenEquipUnitInfoNtpStatusEntry | 1.3.6.1.4.1.2281.10.1.1.11.6.6.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Entry containing the data of the NTP status. | |||||||||||||
| CgenEquipUnitInfoNtpStatusIndex | 1.3.6.1.4.1.2281.10.1.1.11.6.6.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Index of the table. | |||||||||||||
| CgenEquipUnitInfoNtpStatusPollInterval | 1.3.6.1.4.1.2281.10.1.1.11.6.6.1.2 | INTEGER (0..1024) | RO | mandatory | |||||||||
column · INTEGER (0..1024) · read-only · mandatory Indicates the time interval in minutes in which the NTP client polls the server it is locked to. | |||||||||||||
| CgenEquipUnitInfoNtpStatusSyncServerIP | 1.3.6.1.4.1.2281.10.1.1.11.6.6.1.3 | IpAddress | RO | mandatory | |||||||||
column · IpAddress · read-only · mandatory he IPv4 address of the NTP server that the client is currently locked on. | |||||||||||||
| CgenEquipUnitInfoNtpStatusLockState | 1.3.6.1.4.1.2281.10.1.1.11.6.6.1.4 | INTEGER | RO | mandatory | local(1) | ||||||||
| TgenEquipUnitInfoNtpConfigTable | 1.3.6.1.4.1.2281.10.1.1.11.6.7 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table allows the configuration of the NTP (Network Time Protocol). | |||||||||||||
| RgenEquipUnitInfoNtpConfigEntry | 1.3.6.1.4.1.2281.10.1.1.11.6.7.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Entry containing the data of the NTP configuration. | |||||||||||||
| CgenEquipUnitInfoNtpConfigIndex | 1.3.6.1.4.1.2281.10.1.1.11.6.7.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Index of the table. | |||||||||||||
| CgenEquipUnitInfoNtpConfigAdmin | 1.3.6.1.4.1.2281.10.1.1.11.6.7.1.2 | EnableDisable | RW | mandatory | |||||||||
column · EnableDisable · read-write · mandatory The administrative state of the NTP (Network Time Protocol) feature. | |||||||||||||
| CgenEquipUnitInfoNtpConfigVersion | 1.3.6.1.4.1.2281.10.1.1.11.6.7.1.3 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The NTP (Network Time Protocol) version that is being used.
| |||||||||||||
| CgenEquipUnitInfoNtpConfigServerIPaddress1 | 1.3.6.1.4.1.2281.10.1.1.11.6.7.1.4 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory NTP server IPv4 address that is required in first priority. | |||||||||||||
| CgenEquipUnitInfoNtpConfigServerIPaddress2 | 1.3.6.1.4.1.2281.10.1.1.11.6.7.1.5 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory NTP server IPv4 address that is required in second priority. | |||||||||||||
| SgenEquipUnitDaylightSavingTimeStartMonth | 1.3.6.1.4.1.2281.10.1.1.11.7 | INTEGER (1..12) | RW | mandatory | |||||||||
scalar · INTEGER (1..12) · read-write · mandatory This parameter represents the start Month of the daylight saving time. | |||||||||||||
| SgenEquipUnitDaylightSavingTimeStartDay | 1.3.6.1.4.1.2281.10.1.1.11.8 | INTEGER (1..31) | RW | mandatory | |||||||||
scalar · INTEGER (1..31) · read-write · mandatory This parameter represents the start Day of the daylight saving time. | |||||||||||||
| SgenEquipUnitDaylightSavingTimeEndMonth | 1.3.6.1.4.1.2281.10.1.1.11.9 | INTEGER (1..12) | RW | mandatory | |||||||||
scalar · INTEGER (1..12) · read-write · mandatory This parameter represents the end month of the daylight saving time. | |||||||||||||
| SgenEquipUnitDaylightSavingTimeEndDay | 1.3.6.1.4.1.2281.10.1.1.11.10 | INTEGER (1..31) | RW | mandatory | |||||||||
scalar · INTEGER (1..31) · read-write · mandatory This parameter represents the end day of the daylight saving time. | |||||||||||||
| SgenEquipUnitDaylightSavingTimeOffset | 1.3.6.1.4.1.2281.10.1.1.11.11 | INTEGER (0..23) | RW | mandatory | |||||||||
scalar · INTEGER (0..23) · read-write · mandatory Daylight saving offset hours. for a value different then '0', at the starting date of the daylight saving time the time will jump forward in this value. at the end date of the daylight saving time, the time will jump backwards in this value. | |||||||||||||
| TgenEquipUnitInfoTimeServicesTable | 1.3.6.1.4.1.2281.10.1.1.11.12 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table contains the time services properties. | |||||||||||||
| RgenEquipUnitInfoTimeServicesEntry | 1.3.6.1.4.1.2281.10.1.1.11.12.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory This table entry contains the time services properties. | |||||||||||||
| CgenEquipUnitInfoTimeServicesIndex | 1.3.6.1.4.1.2281.10.1.1.11.12.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The index of the table. | |||||||||||||
| CgenEquipUnitInfoTimeServicesUtcHours | 1.3.6.1.4.1.2281.10.1.1.11.12.1.2 | INTEGER (-12..13) | RW | mandatory | |||||||||
column · INTEGER (-12..13) · read-write · mandatory The required hours offset relative to the UTC (Universal Time Coordinated). | |||||||||||||
| CgenEquipUnitInfoTimeServicesUtcMinutes | 1.3.6.1.4.1.2281.10.1.1.11.12.1.3 | INTEGER (0..59) | RW | mandatory | |||||||||
column · INTEGER (0..59) · read-write · mandatory The required minutes offset relative to the UTC (Universal Time Coordinated). | |||||||||||||
| CgenEquipUnitInfoTimeServicesDstStartMonth | 1.3.6.1.4.1.2281.10.1.1.11.12.1.4 | INTEGER (1..12) | RW | mandatory | |||||||||
column · INTEGER (1..12) · read-write · mandatory The month when the DST (Daylight Saving Time) is required to start. | |||||||||||||
| CgenEquipUnitInfoTimeServicesDstStartDay | 1.3.6.1.4.1.2281.10.1.1.11.12.1.5 | INTEGER (1..31) | RW | mandatory | |||||||||
column · INTEGER (1..31) · read-write · mandatory The day when the DST (Daylight Saving Time) is required to start. | |||||||||||||
| CgenEquipUnitInfoTimeServicesDstEndMonth | 1.3.6.1.4.1.2281.10.1.1.11.12.1.6 | INTEGER (1..12) | RW | mandatory | |||||||||
column · INTEGER (1..12) · read-write · mandatory The month when the DST (Daylight Saving Time) is required to end. | |||||||||||||
| CgenEquipUnitInfoTimeServicesDstEndDay | 1.3.6.1.4.1.2281.10.1.1.11.12.1.7 | INTEGER (1..31) | RW | mandatory | |||||||||
column · INTEGER (1..31) · read-write · mandatory The day when the DST (Daylight Saving Time) is required to end. | |||||||||||||
| CgenEquipUnitInfoTimeServicesDstOffset | 1.3.6.1.4.1.2281.10.1.1.11.12.1.8 | INTEGER (0..23) | RW | mandatory | |||||||||
column · INTEGER (0..23) · read-write · mandatory The required offset for DST (Daylight Saving Time) in hours. | |||||||||||||
| CgenEquipUnitInfoTimeServicesUtcDateAndTime | 1.3.6.1.4.1.2281.10.1.1.11.12.1.9 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory UTC (Universal Time Coordinated) date and time. | |||||||||||||
| CgenEquipUnitInfoTimeServicesUtcCurrentDateAndTime | 1.3.6.1.4.1.2281.10.1.1.11.12.1.10 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The calculated current local date & time based on the local clock, UTC and DST (Daylight Saving Time) configurations. | |||||||||||||
| SgenEquipUnitIduPowerSupply1AlarmAdmin | 1.3.6.1.4.1.2281.10.1.1.12 | EnableDisable | RW | mandatory | |||||||||
scalar · EnableDisable · read-write · mandatory This parameter is relevant only for IDU with more than one power supply units. The user can choose to disable (ignore the alarm) of one of the power supply units. | |||||||||||||
| SgenEquipUnitIduPowerSupply2AlarmAdmin | 1.3.6.1.4.1.2281.10.1.1.13 | EnableDisable | RW | mandatory | |||||||||
scalar · EnableDisable · read-write · mandatory This parameter is relevant only for IDU with more than two power supply units. The user can choose to disable (ignore the alarm) of one of the power supply units. | |||||||||||||
| NgenEquipUnitInfoNG | 1.3.6.1.4.1.2281.10.1.1.14 | ||||||||||||
| SgenEquipUnitName | 1.3.6.1.4.1.2281.10.1.1.14.1 | DisplayString | RW | mandatory | |||||||||
scalar · DisplayString · read-write · mandatory The name of the system. | |||||||||||||
| SgenEquipUnitDescription | 1.3.6.1.4.1.2281.10.1.1.14.2 | DisplayString | RW | mandatory | |||||||||
scalar · DisplayString · read-write · mandatory A ahort description of the system. | |||||||||||||
| SgenEquipUnitContactPerson | 1.3.6.1.4.1.2281.10.1.1.14.3 | DisplayString | RW | mandatory | |||||||||
scalar · DisplayString · read-write · mandatory Contact person. | |||||||||||||
| SgenEquipUnitLocation | 1.3.6.1.4.1.2281.10.1.1.14.4 | DisplayString | RW | mandatory | |||||||||
scalar · DisplayString · read-write · mandatory The location of the system. | |||||||||||||
| SgenEquipUnitLatitude | 1.3.6.1.4.1.2281.10.1.1.14.5 | DisplayString | RW | mandatory | | ||||||||
scalar · DisplayString · read-write · mandatory The latitude of the system. Example values from LibreNMS test devices
| |||||||||||||
| SgenEquipUnitLongitude | 1.3.6.1.4.1.2281.10.1.1.14.6 | DisplayString | RW | mandatory | | ||||||||
scalar · DisplayString · read-write · mandatory The longitude of system. Example values from LibreNMS test devices
| |||||||||||||
| SgenEquipUnitIpAddressType | 1.3.6.1.4.1.2281.10.1.1.14.7 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory IP address Family.
| |||||||||||||
| SgenEquipUnitInfoNGTdmInterfaceStandard | 1.3.6.1.4.1.2281.10.1.1.14.8 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The TDM interface standard: ETSI (Erupean) or ANSI (North American)
| |||||||||||||
| NgenEquipUnitInventory | 1.3.6.1.4.1.2281.10.1.2 | ||||||||||||
| SgenEquipUnitIDUSerialNumber | 1.3.6.1.4.1.2281.10.1.2.1 | DisplayString | RO | mandatory | |||||||||
scalar · DisplayString · read-only · mandatory IDU Serial number. | |||||||||||||
| SgenEquipUnitIDUPartNumber | 1.3.6.1.4.1.2281.10.1.2.2 | DisplayString | RO | mandatory | |||||||||
scalar · DisplayString · read-only · mandatory IDU Part number. | |||||||||||||
| NgenEquipUnitInventoryNG | 1.3.6.1.4.1.2281.10.1.2.10 | ||||||||||||
| TgenEquipInventoryTable | 1.3.6.1.4.1.2281.10.1.2.10.1 | NA | mandatory | ||||||||||
table · not-accessible · mandatory inventory common table. | |||||||||||||
| RgenEquipInventoryEntry | 1.3.6.1.4.1.2281.10.1.2.10.1.1 | NA | mandatory | ||||||||||
| CgenEquipInventorySlotIndex | 1.3.6.1.4.1.2281.10.1.2.10.1.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory slot index. | |||||||||||||
| CgenEquipInventoryCardName | 1.3.6.1.4.1.2281.10.1.2.10.1.1.2 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Card name. | |||||||||||||
| CgenEquipInventoryCardType | 1.3.6.1.4.1.2281.10.1.2.10.1.1.3 | InventoryCardType | RO | mandatory | |||||||||
column · InventoryCardType · read-only · mandatory Card type. | |||||||||||||
| CgenEquipInventoryCardSubType | 1.3.6.1.4.1.2281.10.1.2.10.1.1.4 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Card sub type. | |||||||||||||
| CgenEquipInventoryPartNumber | 1.3.6.1.4.1.2281.10.1.2.10.1.1.5 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Part number. | |||||||||||||
| CgenEquipInventorySerialNumber | 1.3.6.1.4.1.2281.10.1.2.10.1.1.6 | DisplayString | RO | mandatory | F217305963 | ||||||||
column · DisplayString · read-only · mandatory Serial number. Example values from LibreNMS test devices
| |||||||||||||
| CgenEquipInventoryNumberWorkingDays | 1.3.6.1.4.1.2281.10.1.2.10.1.1.7 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Number of working days. | |||||||||||||
| NgenEquipUnitLicenseInfo | 1.3.6.1.4.1.2281.10.1.3 | ||||||||||||
| SgenEquipUnitLicenseType | 1.3.6.1.4.1.2281.10.1.3.1 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The unit license type.
| |||||||||||||
| SgenEquipUnitLicenseCode | 1.3.6.1.4.1.2281.10.1.3.2 | DisplayString | RW | mandatory | |||||||||
scalar · DisplayString · read-write · mandatory The user license code that determines the NE license rights. | |||||||||||||
| SgenEquipUnitACMLicense | 1.3.6.1.4.1.2281.10.1.3.3 | AllowedNotAllowed | RO | mandatory | |||||||||
scalar · AllowedNotAllowed · read-only · mandatory The ACM rights for the NE on the current license | |||||||||||||
| SgenEquipUnitSwitchAppLicense | 1.3.6.1.4.1.2281.10.1.3.4 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The switch application rights for the NE on the current license. Switch is either managed-switch or metro switch.
| |||||||||||||
| SgenEquipUnitCapacityLicense | 1.3.6.1.4.1.2281.10.1.3.5 | INTEGER (10..510) | RO | mandatory | |||||||||
scalar · INTEGER (10..510) · read-only · mandatory The radio capacity allowed for the NE on the current license | |||||||||||||
| SgenEquipUnitLicenseDemoAdmin | 1.3.6.1.4.1.2281.10.1.3.6 | EnableDisable | RW | mandatory | |||||||||
scalar · EnableDisable · read-write · mandatory The Admin state of the demo mode. | |||||||||||||
| SgenEquipUnitLicenseDemoTimer | 1.3.6.1.4.1.2281.10.1.3.7 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The Demo timer in hours | |||||||||||||
| SgenEquipUnitLicenseSyncU | 1.3.6.1.4.1.2281.10.1.3.8 | AllowedNotAllowed | RO | mandatory | |||||||||
scalar · AllowedNotAllowed · read-only · mandatory This parameter indicates whether the synchronization unit license is allowed. This license allows configuring synchronization sources for clock distribution. | |||||||||||||
| SgenEquipUnitLicenseNetworkResiliency | 1.3.6.1.4.1.2281.10.1.3.9 | AllowedNotAllowed | RO | mandatory | |||||||||
scalar · AllowedNotAllowed · read-only · mandatory This parameter indicates whether the network resiliency license is allowed. This license allows configuring xSTP protocols and TDM path protection. | |||||||||||||
| SgenEquipUnitLicenseTDMCapacity | 1.3.6.1.4.1.2281.10.1.3.10 | AllowedNotAllowed | RO | mandatory | |||||||||
scalar · AllowedNotAllowed · read-only · mandatory This parameter indicates the number of TDM trails per radio allowed by the current license, if allowed. When TDM capacity license is allowed all scripts are allowed in the radio. | |||||||||||||
| SgenEquipUnitLicenseTDMCapacityValue | 1.3.6.1.4.1.2281.10.1.3.11 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory This parameter indicates the number of TDM trails per radio allowed by the current license, if relevant. The TDM capacity value is not relevant if the genEquipUnitLicenseTDMCapacity is not allowed. | |||||||||||||
| SgenEquipUnitLicensePerUsage | 1.3.6.1.4.1.2281.10.1.3.12 | AllowedNotAllowed | RO | mandatory | |||||||||
scalar · AllowedNotAllowed · read-only · mandatory This parameter indicates whether the per-usage license is allowed. This license allows configuring all features and causes their use to be reported to NMS. If the usage license is allowed, all other licenses are not relevant, as all the licenses are open for configuration. | |||||||||||||
| SgenEquipUnitLicenseAsymScripts | 1.3.6.1.4.1.2281.10.1.3.13 | AllowedNotAllowed | RO | mandatory | |||||||||
scalar · AllowedNotAllowed · read-only · mandatory This parameter indicates whether the asymmetrical scripts license is allowed. This license allows loading asymmetrical scripts. | |||||||||||||
| SgenEquipUnitLicenseDateCode | 1.3.6.1.4.1.2281.10.1.3.14 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory This parameter indicates the generation date and time of the current installed license. Format is 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal). | |||||||||||||
| SgenEquipUnitLicenseValidationNumber | 1.3.6.1.4.1.2281.10.1.3.15 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory This parameter indicates the validation number of the current installed license. It can be used as a proof (for LMS) that the license key was installed in order to get a downgrade refund. | |||||||||||||
| TgenEquipUnitLicenseFeatureTable | 1.3.6.1.4.1.2281.10.1.3.16 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table shows for each feature what is its valid license and whether the license has been violated or not. | |||||||||||||
| RgenEquipUnitLicenseFeatureEntry | 1.3.6.1.4.1.2281.10.1.3.16.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory This table entry shows for each feature what is its valid license and whether the license has been violated or not. | |||||||||||||
| CgenEquipUnitLicenseFeatureId | 1.3.6.1.4.1.2281.10.1.3.16.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory A unique number which indicates the Id of the feature | |||||||||||||
| CgenEquipUnitLicenseFeatureName | 1.3.6.1.4.1.2281.10.1.3.16.1.2 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The name of the feature. | |||||||||||||
| CgenEquipUnitLicenseFeatureDescription | 1.3.6.1.4.1.2281.10.1.3.16.1.3 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory A short description of the feature. | |||||||||||||
| CgenEquipUnitLicenseFeatureIsUsed | 1.3.6.1.4.1.2281.10.1.3.16.1.4 | LicenseGeneric | RO | mandatory | |||||||||
column · LicenseGeneric · read-only · mandatory Indicates whether the licensed feature is actually in used or its quantity that currently is in use. | |||||||||||||
| CgenEquipUnitLicenseFeatureIsAllowed | 1.3.6.1.4.1.2281.10.1.3.16.1.5 | LicenseGeneric | RO | mandatory | |||||||||
column · LicenseGeneric · read-only · mandatory Indicates whether a licensed feature is allowed. | |||||||||||||
| CgenEquipUnitLicenseViolationStatus | 1.3.6.1.4.1.2281.10.1.3.16.1.6 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Indicates whether the actual configuration violates the feature license.
| |||||||||||||
| SgenEquipUnitLicenseCutThrough | 1.3.6.1.4.1.2281.10.1.3.20 | AllowedNotAllowed | RO | mandatory | |||||||||
scalar · AllowedNotAllowed · read-only · mandatory This parameter indicates whether the cut-through license is allowed. This license allows using the cut-through frames in the TM. | |||||||||||||
| SgenEquipUnitLicenseTdmInterfaceStandard | 1.3.6.1.4.1.2281.10.1.3.21 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The TDM interface standard: ETSI (European) or ANSI (North American).
| |||||||||||||
| NgenEquipUnitExternalAlarms | 1.3.6.1.4.1.2281.10.1.4 | ||||||||||||
| NgenEquipUnitAlarmInput | 1.3.6.1.4.1.2281.10.1.4.1 | ||||||||||||
| TgenEquipUnitAlarmInputTable | 1.3.6.1.4.1.2281.10.1.4.1.1 | NA | mandatory | ||||||||||
table · not-accessible · mandatory External input alarm table. Using the table to manage the admin state of the external input alarm (Enable or Disable it). Set a description and severity. | |||||||||||||
| RgenEquipUnitAlarmInputEntry | 1.3.6.1.4.1.2281.10.1.4.1.1.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory External input alarm table. Using the table to manage the admin state of the external input alarm (Enable or Disable it). Set a description and severity. | |||||||||||||
| CgenEquipUnitAlarmInputCounter | 1.3.6.1.4.1.2281.10.1.4.1.1.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory External input alarm table index. | |||||||||||||
| CgenEquipUnitAlarmInputAdmin | 1.3.6.1.4.1.2281.10.1.4.1.1.1.2 | EnableDisableSMI2 | RW | mandatory | |||||||||
column · EnableDisableSMI2 · read-write · mandatory The Admin state of the External input alarm table. | |||||||||||||
| CgenEquipUnitAlarmInputText | 1.3.6.1.4.1.2281.10.1.4.1.1.1.3 | DisplayString (SIZE (0..99)) | RW | mandatory | |||||||||
column · DisplayString (SIZE (0..99)) · read-write · mandatory External input alarm description. | |||||||||||||
| CgenEquipUnitAlarmInputSeverity | 1.3.6.1.4.1.2281.10.1.4.1.1.1.4 | InputSeverity | RW | mandatory | |||||||||
column · InputSeverity · read-write · mandatory External input alarm severity. | |||||||||||||
| CgenEquipUnitAlarmInputState | 1.3.6.1.4.1.2281.10.1.4.1.1.1.5 | OffOn | RO | mandatory | |||||||||
column · OffOn · read-only · mandatory The state, raised or cleared, of the external alarm input. | |||||||||||||
| NgenEquipUnitAlarmOutput | 1.3.6.1.4.1.2281.10.1.4.2 | ||||||||||||
| TgenEquipUnitAlarmOutputTable | 1.3.6.1.4.1.2281.10.1.4.2.1 | NA | mandatory | ||||||||||
table · not-accessible · mandatory External output alarm table. using the table to manage the admin state of the external input alarm , read the status and set an output group. | |||||||||||||
| RgenEquipUnitAlarmOutputEntry | 1.3.6.1.4.1.2281.10.1.4.2.1.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory External output alarm table. using the table to manage the admin state of the external input alarm , read the status and set an output group. | |||||||||||||
| CgenEquipUnitAlarmOutputCounter | 1.3.6.1.4.1.2281.10.1.4.2.1.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory External output alarm table index. | |||||||||||||
| CgenEquipUnitAlarmOutputAdmin | 1.3.6.1.4.1.2281.10.1.4.2.1.1.2 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Admin state of the External output alarm. When 'Enabled', the functionality will be:
(i) If no alarms are raised, the N.O. (normally open) contact will be opened,
while the N.C. (normally closed) contact will be connected to the COM contact.
(ii) When an alarm is raised, or the system power is OFF,
the N.O will be connected to the COM contact, while the N.C. contact will remain opened.
When 'Test' option is selected, the dry contacts behave as an alarm is raised in the system,
as described in case (ii) above.
| |||||||||||||
| CgenEquipUnitAlarmOutputStatus | 1.3.6.1.4.1.2281.10.1.4.2.1.1.3 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The current stauts of the External output alarm table.
| |||||||||||||
| CgenEquipUnitAlarmOutputGroup | 1.3.6.1.4.1.2281.10.1.4.2.1.1.4 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The description of the group to which the external output alarm belongs.
| |||||||||||||
| NgenEquipUnitShelf | 1.3.6.1.4.1.2281.10.1.5 | ||||||||||||
| SgenEquipUnitShelfInstallation | 1.3.6.1.4.1.2281.10.1.5.1 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory This value indicates the NE installation type (standalone or module/card within a chassis).
| |||||||||||||
| SgenEquipUnitShelfModuleRole | 1.3.6.1.4.1.2281.10.1.5.2 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory This value indicates the NE module role (main unit or extention).
| |||||||||||||
| SgenEquipUnitShelfSlotLabel | 1.3.6.1.4.1.2281.10.1.5.3 | DisplayString (SIZE (0..255)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (0..255)) · read-write · mandatory Slot label is a user defined description for the module in the slot. | |||||||||||||
| SgenEquipUnitShelfArchivesOperationStatus | 1.3.6.1.4.1.2281.10.1.5.4 | ProgressStatus | RO | mandatory | |||||||||
scalar · ProgressStatus · read-only · mandatory Shelf-wide configuration archives [backup/restore] operation status. Used also when creating archive for unit info. Relevant only for main units. - ready(0) - inProgress(1), - success(2), - failure(3) | |||||||||||||
| TgenEquipUnitShelfManagmentTable | 1.3.6.1.4.1.2281.10.1.5.5 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table contains information about the IDUs that may be in the shelf (population, communication status, most severe alarm) and provides the ability to backup/restore SW for each IDU. Relevant only for main units. | |||||||||||||
| RgenEquipUnitShelfManagmentEntry | 1.3.6.1.4.1.2281.10.1.5.5.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory This table keeps the shelf information on all the modules in the shelf (population, status, most severe alarm) and
provides the ability for backup/restore command or SW download.
Relevant only for main units. | |||||||||||||
| CgenEquipUnitShelfManagmentSlot | 1.3.6.1.4.1.2281.10.1.5.5.1.1 | SlotId | RO | mandatory | |||||||||
column · SlotId · read-only · mandatory This value is the slot number used as an index for this table. | |||||||||||||
| CgenEquipUnitShelfManagmentSlotPopulation | 1.3.6.1.4.1.2281.10.1.5.5.1.2 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Slot population state, which indicates if the slot is occupied or not. Relevant only for main units.
| |||||||||||||
| CgenEquipUnitShelfManagmentCommunicationStatus | 1.3.6.1.4.1.2281.10.1.5.5.1.3 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory This value indicates if the slot can be reached or not. Relevant only for main units.
| |||||||||||||
| CgenEquipUnitShelfManagmentSlotMostSevereAlarm | 1.3.6.1.4.1.2281.10.1.5.5.1.4 | Severity | RO | mandatory | |||||||||
column · Severity · read-only · mandatory This value is the most severe alarm for the module on this slot. Relevant only for main unit. | |||||||||||||
| CgenEquipUnitShelfManagmentMngSwCommand | 1.3.6.1.4.1.2281.10.1.5.5.1.5 | SwCommand | RW | mandatory | |||||||||
column · SwCommand · read-write · mandatory The command to be executed to manage SW versions. Relevant only for main units. Possible values are: - noOperation(0) - downloadUpgradeVersion(1) - upgrade(2) - rollback(3) - downgrade(4) - downloadDowngradeVersion(5) | |||||||||||||
| CgenEquipUnitShelfManagmentSlotReset | 1.3.6.1.4.1.2281.10.1.5.5.1.6 | OffOn | RW | mandatory | |||||||||
column · OffOn · read-write · mandatory This parameter Allows resetting specific unit according to genEquipUnitShelfManagmentSlot table index. | |||||||||||||
| CgenEquipUnitShelfManagmentSlotIp | 1.3.6.1.4.1.2281.10.1.5.5.1.7 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory Slot SNMP Management IP address. | |||||||||||||
| SgenEquipUnitShelfReset | 1.3.6.1.4.1.2281.10.1.5.6 | OffOn | RW | mandatory | |||||||||
scalar · OffOn · read-write · mandatory This parameter allows resetting of entire shelf. | |||||||||||||
| SgenEquipUnitshelfAllODUAdmin | 1.3.6.1.4.1.2281.10.1.5.7 | EnableDisable | RW | mandatory | |||||||||
scalar · EnableDisable · read-write · mandatory The unit is configured as all outdoor unit, enable or disable it. | |||||||||||||
| TgenEquipUnitShelfSlotConfigTable | 1.3.6.1.4.1.2281.10.1.5.8 | NA | mandatory | ||||||||||
table · not-accessible · mandatory Slot configuration table. | |||||||||||||
| RgenEquipUnitShelfSlotConfigEntry | 1.3.6.1.4.1.2281.10.1.5.8.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory This table allows configuration of card population parameters. | |||||||||||||
| CgenEquipUnitShelfSlotConfigSlotID | 1.3.6.1.4.1.2281.10.1.5.8.1.1 | SlotId | RO | mandatory | |||||||||
column · SlotId · read-only · mandatory This value is the slot number used as an index for this table. | |||||||||||||
| CgenEquipUnitShelfSlotConfigExpectedCardType | 1.3.6.1.4.1.2281.10.1.5.8.1.2 | InventoryCardType | RW | mandatory | |||||||||
column · InventoryCardType · read-write · mandatory Expected card type in current slot. | |||||||||||||
| CgenEquipUnitShelfSlotConfigLabel | 1.3.6.1.4.1.2281.10.1.5.8.1.3 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory Slot label. | |||||||||||||
| CgenEquipUnitShelfSlotConfigAdmin | 1.3.6.1.4.1.2281.10.1.5.8.1.4 | EnableDisable | RW | mandatory | |||||||||
column · EnableDisable · read-write · mandatory Slot admin state. | |||||||||||||
| CgenEquipUnitShelfSlotConfigSlotReset | 1.3.6.1.4.1.2281.10.1.5.8.1.5 | OffOn | RW | mandatory | |||||||||
column · OffOn · read-write · mandatory This parameter Allows resetting specific unit according to genEquipUnitShelfManagmentSlot table index. | |||||||||||||
| TgenEquipUnitShelfTccConfigTable | 1.3.6.1.4.1.2281.10.1.5.9 | NA | mandatory | ||||||||||
table · not-accessible · mandatory TCC configuration table. | |||||||||||||
| RgenEquipUnitShelfTccConfigEntry | 1.3.6.1.4.1.2281.10.1.5.9.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory This table allows configuration of TCC population parameters. | |||||||||||||
| CgenEquipUnitShelfTccConfigSlotID | 1.3.6.1.4.1.2281.10.1.5.9.1.1 | SlotId | RO | mandatory | |||||||||
column · SlotId · read-only · mandatory This value is the TCC slot number used as an index for this table. | |||||||||||||
| CgenEquipUnitShelfTccConfigExpectedCardType | 1.3.6.1.4.1.2281.10.1.5.9.1.2 | InventoryCardType | RW | mandatory | |||||||||
column · InventoryCardType · read-write · mandatory Expected card type in current TCC slot. | |||||||||||||
| CgenEquipUnitShelfTccConfigLabel | 1.3.6.1.4.1.2281.10.1.5.9.1.3 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory TCC label. | |||||||||||||
| CgenEquipUnitShelfTccConfigAdmin | 1.3.6.1.4.1.2281.10.1.5.9.1.4 | EnableDisable | RW | mandatory | |||||||||
column · EnableDisable · read-write · mandatory TCC admin state. | |||||||||||||
| CgenEquipUnitShelfTccConfigReset | 1.3.6.1.4.1.2281.10.1.5.9.1.5 | OffOn | RW | mandatory | |||||||||
column · OffOn · read-write · mandatory This parameter Allows resetting specific unit according to genEquipUnitShelfManagmentSlot table index. | |||||||||||||
| TgenEquipUnitShelfSlotStatusTable | 1.3.6.1.4.1.2281.10.1.5.10 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table contains information about the status of the cards currently inserted in the system. | |||||||||||||
| RgenEquipUnitShelfSlotStatusEntry | 1.3.6.1.4.1.2281.10.1.5.10.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory This table entry contains information about the status of the cards currently inserted in the system. | |||||||||||||
| CgenEquipUnitShelfSlotStatusSlotID | 1.3.6.1.4.1.2281.10.1.5.10.1.1 | SlotId | RO | mandatory | |||||||||
column · SlotId · read-only · mandatory Slot where PW-LIC is inserted. | |||||||||||||
| CgenEquipUnitShelfSlotStatusOccupancy | 1.3.6.1.4.1.2281.10.1.5.10.1.2 | CardOccupancy | RO | mandatory | |||||||||
column · CardOccupancy · read-only · mandatory Slot Occupancy. | |||||||||||||
| CgenEquipUnitShelfSlotStatusAllowedCardTypes | 1.3.6.1.4.1.2281.10.1.5.10.1.3 | Counter64 | RO | mandatory | |||||||||
column · Counter64 · read-only · mandatory shelf slot allowed card types. | |||||||||||||
| CgenEquipUnitShelfSlotStatusCardType | 1.3.6.1.4.1.2281.10.1.5.10.1.4 | InventoryCardType | RO | mandatory | |||||||||
column · InventoryCardType · read-only · mandatory Shelf Slot card type. | |||||||||||||
| CgenEquipUnitShelfSlotStatusOperationalState | 1.3.6.1.4.1.2281.10.1.5.10.1.5 | OperState | RO | mandatory | |||||||||
column · OperState · read-only · mandatory Operational State. | |||||||||||||
| CgenEquipUnitShelfSlotStatusCommunication | 1.3.6.1.4.1.2281.10.1.5.10.1.6 | DownUp | RO | mandatory | |||||||||
column · DownUp · read-only · mandatory Slot Operational State. | |||||||||||||
| TgenEquipUnitShelfTccStatusTable | 1.3.6.1.4.1.2281.10.1.5.11 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table contains information about the status of the TCC currently inserted in the system. | |||||||||||||
| RgenEquipUnitShelfTccStatusEntry | 1.3.6.1.4.1.2281.10.1.5.11.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory This table entry contains information about the status of the TCC currently inserted in the system. | |||||||||||||
| CgenEquipUnitShelfTccStatusSlotID | 1.3.6.1.4.1.2281.10.1.5.11.1.1 | SlotId | RO | mandatory | |||||||||
column · SlotId · read-only · mandatory Slot where PW-LIC is inserted. | |||||||||||||
| CgenEquipUnitShelfTccStatusOccupancy | 1.3.6.1.4.1.2281.10.1.5.11.1.2 | CardOccupancy | RO | mandatory | |||||||||
column · CardOccupancy · read-only · mandatory Slot Occupancy. | |||||||||||||
| CgenEquipUnitShelfTccStatusAllowedCardTypes | 1.3.6.1.4.1.2281.10.1.5.11.1.3 | Counter64 | RO | mandatory | |||||||||
column · Counter64 · read-only · mandatory shelf slot allowed card types. | |||||||||||||
| CgenEquipUnitShelfTccStatusCardType | 1.3.6.1.4.1.2281.10.1.5.11.1.4 | InventoryCardType | RO | mandatory | |||||||||
column · InventoryCardType · read-only · mandatory Shelf Slot card type. | |||||||||||||
| CgenEquipUnitShelfTccStatusOperationalState | 1.3.6.1.4.1.2281.10.1.5.11.1.5 | OperState | RO | mandatory | |||||||||
column · OperState · read-only · mandatory Operational State. | |||||||||||||
| CgenEquipUnitShelfTccStatusCommunication | 1.3.6.1.4.1.2281.10.1.5.11.1.6 | DownUp | RO | mandatory | |||||||||
column · DownUp · read-only · mandatory Slot Operational State. | |||||||||||||
| TgenEquipUnitShelfManagmentSeverityTable | 1.3.6.1.4.1.2281.10.1.5.12 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table indicates the number of current raised alarms per slot. | |||||||||||||
| RgenEquipUnitShelfManagmentSeverityEntry | 1.3.6.1.4.1.2281.10.1.5.12.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory This table entry indicates the number of current raised alarms per slot. | |||||||||||||
| CgenEquipUnitShelfManagmentSeveritySlot | 1.3.6.1.4.1.2281.10.1.5.12.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The slot ID number that identifies it. | |||||||||||||
| CgenEquipUnitShelfManagmentSeverityCritical | 1.3.6.1.4.1.2281.10.1.5.12.1.2 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The number of alarms with 'Critical' severity. | |||||||||||||
| CgenEquipUnitShelfManagmentSeverityMajor | 1.3.6.1.4.1.2281.10.1.5.12.1.3 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The number of alarms with 'Major' severity. | |||||||||||||
| CgenEquipUnitShelfManagmentSeverityMinor | 1.3.6.1.4.1.2281.10.1.5.12.1.4 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The number of alarms with 'Minor' severity. | |||||||||||||
| CgenEquipUnitShelfManagmentSeverityWarning | 1.3.6.1.4.1.2281.10.1.5.12.1.5 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The number of alarms with 'Warning' severity. | |||||||||||||
| CgenEquipUnitShelfManagmentSeverityIndeterminate | 1.3.6.1.4.1.2281.10.1.5.12.1.6 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The number of alarms with 'Indeterminate' severity. | |||||||||||||
| TgenEquipUnitShelfPdcFanStatusTable | 1.3.6.1.4.1.2281.10.1.5.13 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table shows for fun card. | |||||||||||||
| RgenEquipUnitShelfPdcFanStatusEntry | 1.3.6.1.4.1.2281.10.1.5.13.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory This table shows for fun card. | |||||||||||||
| CgenEquipUnitShelfPdcFanStatusPdcFanId | 1.3.6.1.4.1.2281.10.1.5.13.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory pdc-fan-id | |||||||||||||
| CgenEquipUnitShelfPdcFanStatusPdcFanExMonitor | 1.3.6.1.4.1.2281.10.1.5.13.1.2 | EnableDisable | RW | mandatory | |||||||||
column · EnableDisable · read-write · mandatory pdc-fan-existent monitor. | |||||||||||||
| CgenEquipUnitShelfPdcFanStatusPdcFanOccupancy | 1.3.6.1.4.1.2281.10.1.5.13.1.3 | CardOccupancy | RO | mandatory | |||||||||
column · CardOccupancy · read-only · mandatory card_occupancy. | |||||||||||||
| CgenEquipUnitShelfPdcFanStatusPdcFanCardType | 1.3.6.1.4.1.2281.10.1.5.13.1.4 | InventoryCardType | RO | mandatory | |||||||||
column · InventoryCardType · read-only · mandatory Indicates whether the licensed feature is actually in used or its quantity that currently is in use. | |||||||||||||
| TgenEquipUnitShelfAbcMuxTable | 1.3.6.1.4.1.2281.10.1.5.14 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table allows enabling/disabling each ABC MUX group. ABC groups can be defined on top of these MUX. | |||||||||||||
| RgenEquipUnitShelfAbcMuxEntry | 1.3.6.1.4.1.2281.10.1.5.14.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory This table entry allows enabling/disabling each ABC MUX group. ABC groups can be defined on top of these MUX. | |||||||||||||
| CgenEquipUnitShelfAbcMuxNumber | 1.3.6.1.4.1.2281.10.1.5.14.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Identifier for each of the possible MUXs which choose between using the ABC trunks or the port for multi-directional radios | |||||||||||||
| CgenEquipUnitShelfAbcMuxAdmin | 1.3.6.1.4.1.2281.10.1.5.14.1.2 | EnableDisable | RW | mandatory | |||||||||
column · EnableDisable · read-write · mandatory Enables the MUX (for ABC) or disables it (for multi-directional radios). | |||||||||||||
| SgenEquipUnitShelfMultiplexTrafficSource | 1.3.6.1.4.1.2281.10.1.5.23 | INTEGER (1..12) | RW | mandatory | |||||||||
scalar · INTEGER (1..12) · read-write · mandatory The parameter multiplex traffic between slot 1 and slot 12. | |||||||||||||
| SgenEquipUnitShelfMaskUnderVoltageAlarmFirstPowerFeed | 1.3.6.1.4.1.2281.10.1.5.24 | EnableDisable | RW | mandatory | |||||||||
scalar · EnableDisable · read-write · mandatory Mask undervoltage alarm on 1st DC power feed. | |||||||||||||
| SgenEquipUnitShelfMaskUnderVoltageAlarmSecondPowerFeed | 1.3.6.1.4.1.2281.10.1.5.25 | EnableDisable | RW | mandatory | |||||||||
scalar · EnableDisable · read-write · mandatory Mask undervoltage alarm on 2nd DC power feed | |||||||||||||
| NgenEquipProtection | 1.3.6.1.4.1.2281.10.1.6 | ||||||||||||
| SgenEquipProtectionAdmin | 1.3.6.1.4.1.2281.10.1.6.1 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The Admin mode of the protection. In case of protection2Plus2Hsb this parameter should be configured in the main and extension slots.
| |||||||||||||
| SgenEquipProtectionMode | 1.3.6.1.4.1.2281.10.1.6.2 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory In protection mode, the card can be either active or standby
| |||||||||||||
| SgenEquipProtectionMateIPAddr | 1.3.6.1.4.1.2281.10.1.6.3 | IpAddress | RO | mandatory | |||||||||
scalar · IpAddress · read-only · mandatory Same parameter as genEquipNetworkMateIp. In case of 1+1 protection it is the protected card (Mate) IP address. In case of 2+2 protection it is the IP address of the protected unit. | |||||||||||||
| SgenEquipProtectionMateMACAddr | 1.3.6.1.4.1.2281.10.1.6.4 | MacAddress | RO | mandatory | |||||||||
scalar · MacAddress · read-only · mandatory In case of 1+1 protection it is protected card (Mate) MAC address In case of 2+2 protection it is the IP address of the protected unit. | |||||||||||||
| SgenEquipProtectionRadioExcessiveBERSwitch | 1.3.6.1.4.1.2281.10.1.6.5 | EnableDisable | RW | mandatory | |||||||||
scalar · EnableDisable · read-write · mandatory The Admin state of an Excessive BER threshold. When enabled, crossing the Excessive BER threshold will cause a protection switch. | |||||||||||||
| SgenEquipProtectionLockout | 1.3.6.1.4.1.2281.10.1.6.6 | OffOn | RW | mandatory | |||||||||
scalar · OffOn · read-write · mandatory This parameter provides the ability to lock the mode of each card in the protection, meaning to force the fact that protection switch will not occur. | |||||||||||||
| SgenEquipProtectionForceSwitch | 1.3.6.1.4.1.2281.10.1.6.7 | OffOn | RW | mandatory | |||||||||
scalar · OffOn · read-write · mandatory This parameter is a command that forces a protection switch regardless of the state of the standby card. | |||||||||||||
| SgenEquipProtectionManualSwitch | 1.3.6.1.4.1.2281.10.1.6.8 | OffOn | RW | mandatory | |||||||||
scalar · OffOn · read-write · mandatory This parameter is a command that performs manaual protection switch. | |||||||||||||
| SgenEquipProtectionCopyToMateComand | 1.3.6.1.4.1.2281.10.1.6.9 | OffOn | RW | mandatory | |||||||||
scalar · OffOn · read-write · mandatory Setting this parameter to On will copy configured parameters from the active to the standby unit. | |||||||||||||
| SgenEquipProtectionCopyToMateStatus | 1.3.6.1.4.1.2281.10.1.6.10 | ProgressStatus | RO | mandatory | |||||||||
scalar · ProgressStatus · read-only · mandatory This parameter represents the status of the copy-to-mate command when protection is enabled. - ready(0) - inProgress(1), - success(2), - failure(3) | |||||||||||||
| SgenEquipProtectionMultiUnitLAGAdmin | 1.3.6.1.4.1.2281.10.1.6.11 | EnableDisable | RW | mandatory | |||||||||
scalar · EnableDisable · read-write · mandatory This parameter enables the Multi Unit LAG feature. It can be activated only in Single Pipe configuration and only when protection is active (either 1+1 or 2+2). | |||||||||||||
| SgenEquipProtectionRevertiveAdmin | 1.3.6.1.4.1.2281.10.1.6.12 | EnableDisable | RW | mandatory | |||||||||
scalar · EnableDisable · read-write · mandatory Enable/Disable revertive protection mode. In revertive protection mode one IDU will be defined as a Primary and the other will be Secondary. Revertive protection will always tend to make the Primary IDU active unless it has a hardware failure. | |||||||||||||
| SgenEquipProtectionRevertivePrimaryIDU | 1.3.6.1.4.1.2281.10.1.6.13 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Decides whether upper or lower IDU will be primary. When placed in a shelf, the upper will be the upper slot in the shelf. When working in stand-alone mode, the IDU with the highest IP address will be considered as upper.
| |||||||||||||
| SgenEquipProtectionRevertiveMinTimer | 1.3.6.1.4.1.2281.10.1.6.14 | INTEGER (1..30) | RW | mandatory | |||||||||
scalar · INTEGER (1..30) · read-write · mandatory Minimal revertive protection timer period. | |||||||||||||
| SgenEquipProtectionRevertiveMaxNumOfTries | 1.3.6.1.4.1.2281.10.1.6.15 | INTEGER (0..10) | RW | mandatory | |||||||||
scalar · INTEGER (0..10) · read-write · mandatory Maximal number of revertive protection tries. Used to prevent instability. Revertive protection will give up trying to switch to the primary standby IDU path after the maximal number of tries. Setting Zero value will enable revertive protection switch only if the last protection switch was due to a local equipment failure. | |||||||||||||
| SgenEquipProtectionRevertiveTimerMultiplier | 1.3.6.1.4.1.2281.10.1.6.16 | INTEGER (1..10) | RW | mandatory | |||||||||
scalar · INTEGER (1..10) · read-write · mandatory A factor that increases the revertive timer period after each try. Setting 1 value will leave the timer period constantly at its minimal value. | |||||||||||||
| SgenEquipProtectionAspRevertive | 1.3.6.1.4.1.2281.10.1.6.17 | EnableDisable | RW | mandatory | |||||||||
scalar · EnableDisable · read-write · mandatory n Smart Pipe HSB mode , this parameter causes the Ethernet line port to be muted upon a complete failure of the radio signal (in both active and standby units) | |||||||||||||
| NgenEquipDiversity | 1.3.6.1.4.1.2281.10.1.7 | ||||||||||||
| SgenEquipDiversityType | 1.3.6.1.4.1.2281.10.1.7.1 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory this parameter sets the type of hitless diversity to be used. Notice that only if protection is enabled this has any effect.
| |||||||||||||
| SgenEquipDiversityRevertiveMode | 1.3.6.1.4.1.2281.10.1.7.2 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory this parameter sets whether hitless switches are revertive in the event that the primary radio channel doesn't have any errors.
| |||||||||||||
| SgenEquipDiversityPrimaryRadio | 1.3.6.1.4.1.2281.10.1.7.3 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory this parameter sets which IDU contains the primary radio channel to revert to.
| |||||||||||||
| SgenEquipDiversityRevertiveTimer | 1.3.6.1.4.1.2281.10.1.7.4 | INTEGER (1..15) | RW | mandatory | |||||||||
scalar · INTEGER (1..15) · read-write · mandatory This parameter sets the amount of seconds that must pass without a failure in the primary radio before doing a revertive switch. | |||||||||||||
| SgenEquipDiversityForceActive | 1.3.6.1.4.1.2281.10.1.7.5 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory This parameter allows forcing incoming traffic to be taken from either of the radios (or none) for testing purposes.
| |||||||||||||
| SgenEquipDiversitySwitchCounter | 1.3.6.1.4.1.2281.10.1.7.6 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory This parameter shows the number of hitless switches performed since last time counter was cleared. | |||||||||||||
| SgenEquipDiversitySwitchCounterClear | 1.3.6.1.4.1.2281.10.1.7.7 | OffOn | RW | mandatory | |||||||||
scalar · OffOn · read-write · mandatory This parameter allows clearing of switch counter. | |||||||||||||
| SgenEquipDiversityReceiveRadio | 1.3.6.1.4.1.2281.10.1.7.8 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory This parameter shows from which radio the traffic is currently being taken.
| |||||||||||||
| NgenEquipFault | 1.3.6.1.4.1.2281.10.3 | ||||||||||||
| NgenEquipCurrentAlarm | 1.3.6.1.4.1.2281.10.3.1 | ||||||||||||
| SgenEquipCurrentAlarmLastChangeCounter | 1.3.6.1.4.1.2281.10.3.1.1 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory This counter is initialized with a random number after resest, and incremented on each change in the CurrentAlarmTable | |||||||||||||
| TgenEquipCurrentAlarmTable | 1.3.6.1.4.1.2281.10.3.1.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table includes the current alarm (when a RAISED trap is sent, an alarm is added to the table, when a CLEAR trap is sent, the alarm is removed). | |||||||||||||
| RgenEquipCurrentAlarmEntry | 1.3.6.1.4.1.2281.10.3.1.2.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Entry containing the info of current RAISED traps. | |||||||||||||
| CgenEquipCurrentAlarmCounter | 1.3.6.1.4.1.2281.10.3.1.2.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory A running counter of open alarms, incremented upon each new alarm. | |||||||||||||
| CgenEquipCurrentAlarmRaisedTimeT | 1.3.6.1.4.1.2281.10.3.1.2.1.2 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The rasied time of this alarm. Time in seconds since January 1, 1970 00:00 UTC. | |||||||||||||
| CgenEquipCurrentAlarmId | 1.3.6.1.4.1.2281.10.3.1.2.1.3 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Alarm ID. List of alarm IDs is available in the MIB Ref. Guide. | |||||||||||||
| CgenEquipCurrentAlarmName | 1.3.6.1.4.1.2281.10.3.1.2.1.4 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Alarm name (the parameter and entity in the CLI) for example 'radio/framer/radio-lof' | |||||||||||||
| CgenEquipCurrentAlarmInstance | 1.3.6.1.4.1.2281.10.3.1.2.1.5 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory In the case of alarms that may have several appereances (at interfaces, channels, VCs, etc.), this parameter indicates the instance of the alarm. | |||||||||||||
| CgenEquipCurrentAlarmSeverity | 1.3.6.1.4.1.2281.10.3.1.2.1.6 | Severity | RO | mandatory | |||||||||
column · Severity · read-only · mandatory The current Alarm severity
the values can be:
- indeterminate(0)
- critical(1)
- major(2)
- minor(3)
- warning(4)
- cleared(5) | |||||||||||||
| CgenEquipCurrentAlarmIfIndex | 1.3.6.1.4.1.2281.10.3.1.2.1.7 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Interface Index where the alarm occurred, alarms that are not associated with specific interfaces will have the following value: For a non-interface alarm, the value is: 65001 | |||||||||||||
| CgenEquipCurrentAlarmModule | 1.3.6.1.4.1.2281.10.3.1.2.1.8 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The module of the alarm. Possible values are 'IDU' or 'RFU'. | |||||||||||||
| CgenEquipCurrentAlarmDesc | 1.3.6.1.4.1.2281.10.3.1.2.1.9 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The alarm description (same as the description in the sent trap). | |||||||||||||
| CgenEquipCurrentAlarmProbableCause | 1.3.6.1.4.1.2281.10.3.1.2.1.10 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The alarm probable cause. | |||||||||||||
| CgenEquipCurrentAlarmCorrectiveActions | 1.3.6.1.4.1.2281.10.3.1.2.1.11 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The alarm corrective actions. | |||||||||||||
| CgenEquipCurrentAlarmState | 1.3.6.1.4.1.2281.10.3.1.2.1.12 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The state of the alarm (cleared or rasied).
| |||||||||||||
| CgenEquipCurrentAlarmSlotId | 1.3.6.1.4.1.2281.10.3.1.2.1.13 | SlotId | RO | mandatory | |||||||||
column · SlotId · read-only · mandatory The ID of the slot originating the alarm. | |||||||||||||
| CgenEquipCurrentAlarmAdditionalInfo | 1.3.6.1.4.1.2281.10.3.1.2.1.14 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Additional information that may further qualify the source of the alarm. | |||||||||||||
| CgenEquipCurrentAlarmUserText | 1.3.6.1.4.1.2281.10.3.1.2.1.15 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory An additional description of the event or fault, or any other information that user wants to attach to it. | |||||||||||||
| SgenEquipMostSevereAlarm | 1.3.6.1.4.1.2281.10.3.1.3 | Severity | RO | mandatory | |||||||||
scalar · Severity · read-only · mandatory The severity of the most severe alarm in the system | |||||||||||||
| SgenEquipAlarmConfigDefault | 1.3.6.1.4.1.2281.10.3.1.4 | OffOn | RW | mandatory | |||||||||
scalar · OffOn · read-write · mandatory Allows to revert back to the default values of all alarm configurations | |||||||||||||
| TgenEquipAlarmConfigTable | 1.3.6.1.4.1.2281.10.3.1.5 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table allows system alarms configuration. | |||||||||||||
| RgenEquipAlarmConfigEntry | 1.3.6.1.4.1.2281.10.3.1.5.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory This table entry allows system alarms configuration. | |||||||||||||
| CgenEquipAlarmConfigId | 1.3.6.1.4.1.2281.10.3.1.5.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory he alarm unique Id number that identifies it. | |||||||||||||
| CgenEquipAlarmConfigSeverity | 1.3.6.1.4.1.2281.10.3.1.5.1.2 | Severity | RW | mandatory | |||||||||
column · Severity · read-write · mandatory The perceived severity of the raised alarm. | |||||||||||||
| CgenEquipAlarmConfigDescr | 1.3.6.1.4.1.2281.10.3.1.5.1.3 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The description of the raised alarm. | |||||||||||||
| CgenEquipAlarmConfigAdditionalText | 1.3.6.1.4.1.2281.10.3.1.5.1.4 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory An additional description of the fault, or any other information that user wants to attach to it. | |||||||||||||
| CgenEquipAlarmServiceAffect | 1.3.6.1.4.1.2281.10.3.1.5.1.5 | OffOn | RW | mandatory | |||||||||
column · OffOn · read-write · mandatory Indicates whether the raised alarm affects a service. | |||||||||||||
| NgenEquipTrapCfg | 1.3.6.1.4.1.2281.10.3.2 | ||||||||||||
| TgenEquipTrapCfgMgrTable | 1.3.6.1.4.1.2281.10.3.2.1 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table indicates the Trap manager list. | |||||||||||||
| RgenEquipTrapCfgMgrEntry | 1.3.6.1.4.1.2281.10.3.2.1.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Entry containing the manager IP addresses and the trap filter options.
| |||||||||||||
| CgenEquipTrapCfgMgrId | 1.3.6.1.4.1.2281.10.3.2.1.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory This value indicates an index of a specific manager | |||||||||||||
| CgenEquipTrapCfgMgrAdmin | 1.3.6.1.4.1.2281.10.3.2.1.1.2 | EnableDisable | RW | mandatory | |||||||||
column · EnableDisable · read-write · mandatory This value indicates an administrative state of a specific manager. disable - will not send traps to this trap manager. | |||||||||||||
| CgenEquipTrapCfgMgrIP | 1.3.6.1.4.1.2281.10.3.2.1.1.3 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory This value indicates the manager's IP address. | |||||||||||||
| CgenEquipTrapCfgMgrPort | 1.3.6.1.4.1.2281.10.3.2.1.1.4 | INTEGER (70..65535) | RW | mandatory | |||||||||
column · INTEGER (70..65535) · read-write · mandatory The Port for sending the trap for each manager (possible values: 70-65535) | |||||||||||||
| CgenEquipTrapCfgMgrName | 1.3.6.1.4.1.2281.10.3.2.1.1.5 | DisplayString (SIZE (0..30)) | RW | mandatory | |||||||||
column · DisplayString (SIZE (0..30)) · read-write · mandatory The name of the manager configured to receive the traps | |||||||||||||
| CgenEquipTrapCfgMgrCommunity | 1.3.6.1.4.1.2281.10.3.2.1.1.6 | DisplayString (SIZE (0..30)) | RW | mandatory | |||||||||
column · DisplayString (SIZE (0..30)) · read-write · mandatory The manager trap community configured. | |||||||||||||
| CgenEquipTrapCfgMgrSeverityFilter | 1.3.6.1.4.1.2281.10.3.2.1.1.7 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This is a bit mask value for masking traps according to its severity.
There is a bit for each severity. If the relevant bit is on (1),
the Agent will send traps with this severity. It won't send traps if the
bit is off (0).
The list of bits from LSB to MSB:
Bit 1 (LSB) - indeterminate
Bit 2 - critical
Bit 3 - major
Bit 4 - minor
Bit 5 - warning
Bit 6 - cleared | |||||||||||||
| CgenEquipTrapCfgMgrStatusChangeFilter | 1.3.6.1.4.1.2281.10.3.2.1.1.8 | OffOn | RW | mandatory | |||||||||
column · OffOn · read-write · mandatory This value represents the mode in which the traps are sent: If the filter is set to ON - only traps that change the severity of the system are sent. If the filter is set to OFF - all traps (that are not screened by other filters) are sent. | |||||||||||||
| CgenEquipTrapCfgMgrCLLI | 1.3.6.1.4.1.2281.10.3.2.1.1.9 | DisplayString (SIZE (0..100)) | RW | mandatory | |||||||||
column · DisplayString (SIZE (0..100)) · read-write · mandatory Common Language Location Identifier (maximum length: 100 chars) | |||||||||||||
| CgenEquipTrapCfgMgrHeartbeatPeriod | 1.3.6.1.4.1.2281.10.3.2.1.1.10 | INTEGER (0..1440) | RW | mandatory | |||||||||
column · INTEGER (0..1440) · read-write · mandatory This item defines the interval (in minutes) between each heartbeat trap. A value of '0' disables this feature. | |||||||||||||
| CgenEquipTrapCfgMgrIPv6 | 1.3.6.1.4.1.2281.10.3.2.1.1.11 | OCTET STRING (SIZE (0..16)) | RW | mandatory | |||||||||
column · OCTET STRING (SIZE (0..16)) · read-write · mandatory The IP-v6 address of the trap manage) | |||||||||||||
| CgenEquipTrapCfgMgrV3User | 1.3.6.1.4.1.2281.10.3.2.1.1.12 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The manager trap V3 user name configured | |||||||||||||
| NgenEquipEventLog | 1.3.6.1.4.1.2281.10.3.3 | ||||||||||||
| TgenEquipEventLogTable | 1.3.6.1.4.1.2281.10.3.3.1 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table includes the event log. | |||||||||||||
| RgenEquipEventLogEntry | 1.3.6.1.4.1.2281.10.3.3.1.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Entry containing the info of the event log table. | |||||||||||||
| CgenEquipEventLogCounter | 1.3.6.1.4.1.2281.10.3.3.1.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The event counter. | |||||||||||||
| CgenEquipEventLogRaisedTimeT | 1.3.6.1.4.1.2281.10.3.3.1.1.2 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The rasied time of this event. Time in seconds since January 1, 1970 00:00 UTC. (time_t format) | |||||||||||||
| CgenEquipEventLogSeverity | 1.3.6.1.4.1.2281.10.3.3.1.1.3 | Severity | RO | mandatory | |||||||||
column · Severity · read-only · mandatory The event severity, possible values are:
- indeterminate(0),
- critical(1)
- major(2)
- minor(3)
- warning(4)
- cleared(5) | |||||||||||||
| CgenEquipEventLogModule | 1.3.6.1.4.1.2281.10.3.3.1.1.4 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The module of the event. ('IDU' or 'RFU') | |||||||||||||
| CgenEquipEventLogDesc | 1.3.6.1.4.1.2281.10.3.3.1.1.5 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The event description (same as the description in the sent trap). | |||||||||||||
| CgenEquipEventLogState | 1.3.6.1.4.1.2281.10.3.3.1.1.6 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The state of the event or alarm. In case of alarm, 'cleard' or 'raised'. In case of event, 'event'.
| |||||||||||||
| CgenEquipEventLogProbableCause | 1.3.6.1.4.1.2281.10.3.3.1.1.7 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The probable cause that may be the reason for the event. | |||||||||||||
| CgenEquipEventLogCorrectiveActions | 1.3.6.1.4.1.2281.10.3.3.1.1.8 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Some possible suggested corrective actions in order to eliminate the raised alarm. | |||||||||||||
| CgenEquipEventLogAdditionalInfo | 1.3.6.1.4.1.2281.10.3.3.1.1.9 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Additional information that may further qualify the source of the event. | |||||||||||||
| CgenEquipEventLogUserText | 1.3.6.1.4.1.2281.10.3.3.1.1.10 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory An additional description of the event or fault, or any other information that user wants to attach to it. | |||||||||||||
| CgenEquipEventLogIfIndex | 1.3.6.1.4.1.2281.10.3.3.1.1.11 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory If Index of the originated source. | |||||||||||||
| CgenEquipEventLogId | 1.3.6.1.4.1.2281.10.3.3.1.1.12 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The Id of the event. | |||||||||||||
| SgenEquipEventLogClear | 1.3.6.1.4.1.2281.10.3.3.2 | OffOn | RW | mandatory | |||||||||
scalar · OffOn · read-write · mandatory The clear event log command. If enabled, will clear the event log. | |||||||||||||
| SgenEquipEventLogLastChangeCounter | 1.3.6.1.4.1.2281.10.3.3.3 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory This counter is initialized with a random number after reset, and incremented on each change in the EventLogTable | |||||||||||||
| SgenEquipFaultErrno | 1.3.6.1.4.1.2281.10.3.4 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The application last error number. List of Errnos are located in the MIB Ref Guide. | |||||||||||||
| SgenEquipFaultErrDescr | 1.3.6.1.4.1.2281.10.3.5 | DisplayString | RO | mandatory | |||||||||
scalar · DisplayString · read-only · mandatory The application last error description. List of Errnos are located in the MIB Ref Guide. | |||||||||||||
| NgenEquipMng | 1.3.6.1.4.1.2281.10.4 | ||||||||||||
| NgenEquipMngSw | 1.3.6.1.4.1.2281.10.4.1 | ||||||||||||
| SgenEquipMngSwServerUrl | 1.3.6.1.4.1.2281.10.4.1.1 | DisplayString | RW | mandatory | |||||||||
scalar · DisplayString · read-write · mandatory Remote SW Update Server URL where SW updates reside | |||||||||||||
| SgenEquipMngSwServerLogin | 1.3.6.1.4.1.2281.10.4.1.2 | DisplayString | RW | mandatory | |||||||||
scalar · DisplayString · read-write · mandatory Remote server login | |||||||||||||
| SgenEquipMngSwServerPassword | 1.3.6.1.4.1.2281.10.4.1.3 | DisplayString | RW | mandatory | |||||||||
scalar · DisplayString · read-write · mandatory Remote server password | |||||||||||||
| SgenEquipMngSwProxyUrl | 1.3.6.1.4.1.2281.10.4.1.4 | DisplayString | RO | obsolete | |||||||||
scalar · DisplayString · read-only · obsolete Proxy Server Url. This parameter is obsolete and should not be in used. | |||||||||||||
| SgenEquipMngSwProxyLogin | 1.3.6.1.4.1.2281.10.4.1.5 | DisplayString | RO | obsolete | |||||||||
scalar · DisplayString · read-only · obsolete Proxy server login This parameter is obsolete and should not be in used. | |||||||||||||
| SgenEquipMngSwProxyPassword | 1.3.6.1.4.1.2281.10.4.1.6 | DisplayString | RO | obsolete | |||||||||
scalar · DisplayString · read-only · obsolete Proxy server password This parameter is obsolete and should not be in used. | |||||||||||||
| SgenEquipMngSwDownloadStatus | 1.3.6.1.4.1.2281.10.4.1.7 | ProgressStatus | RO | mandatory | |||||||||
scalar · ProgressStatus · read-only · mandatory Download software status. Possible values are: - ready(0) - inProgress(1) - success(2) - failure(3) | |||||||||||||
| SgenEquipMngSwInstallStatus | 1.3.6.1.4.1.2281.10.4.1.8 | ProgressStatus | RO | mandatory | |||||||||
scalar · ProgressStatus · read-only · mandatory Install software status. Possible values are: - ready(0) - inProgress(1) - success(2) - failure(3) | |||||||||||||
| SgenEquipMngSwCommand | 1.3.6.1.4.1.2281.10.4.1.9 | SwCommandTimer | RW | mandatory | |||||||||
scalar · SwCommandTimer · read-write · mandatory The command that is executed to manage SW versions. Depending on the value given, a different operation will be carried out involving FTP and/or version installing. Notice that software will be installed in all slots in a shelf and reset will be automatically carried out at the end of the installation process. Possible values are: - noOperation(0) - downloadUpgradeVersion(1) - load a newer version from FTP site - upgrade(2) - upgrade to newer version which has already been loaded - rollback(3) - install a previously working version without downloading - downgrade(4) - downgrade to an older version which has alredy been loaded - downloadDowngradeVersion(5) - load an older version from FTP site - upgradeTimer(6) - Starts the timer defined in genEquipMngSwInstallationTimer and upon expiration upgrades to a newer version which has already been loaded. - rollbackTimer(7) - Starts the timer defined in genEquipMngSwInstallationTimer and upon expiration install a previously working version without downloading - downgradeTimer(7) - Starts the timer defined in genEquipMngSwInstallationTimer and upon expiration downgrades to an older which has already been loaded - abortTimedTnstallation(9) stops a counting timer; the installation process will not take place. Notice that it does not stop an installation process once started. | |||||||||||||
| SgenEquipMngSwInstalledIduVersion | 1.3.6.1.4.1.2281.10.4.1.10 | DisplayString | RO | mandatory | |||||||||
scalar · DisplayString · read-only · mandatory This value indicates the Package Version of the installed IDU SW | |||||||||||||
| SgenEquipMngSwInstalledRfuVersion | 1.3.6.1.4.1.2281.10.4.1.11 | DisplayString | RO | mandatory | |||||||||
scalar · DisplayString · read-only · mandatory This value indicates the Package version of the installed RFU SW. | |||||||||||||
| NgenEquipMngSwVersions | 1.3.6.1.4.1.2281.10.4.1.13 | ||||||||||||
| TgenEquipMngSwIDUVersionsTable | 1.3.6.1.4.1.2281.10.4.1.13.1 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table contains all IDU running versions. | |||||||||||||
| RgenEquipMngSwIDUVersionsEntry | 1.3.6.1.4.1.2281.10.4.1.13.1.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Entry containing the info of the IDU Versions table. | |||||||||||||
| CgenEquipMngSwIDUVersionsCounter | 1.3.6.1.4.1.2281.10.4.1.13.1.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory This is the index of this table. | |||||||||||||
| CgenEquipMngSwIDUVersionsPackageName | 1.3.6.1.4.1.2281.10.4.1.13.1.1.2 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The package name | |||||||||||||
| CgenEquipMngSwIDUVersionsTargetDevice | 1.3.6.1.4.1.2281.10.4.1.13.1.1.3 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The Target device within the NE (i.e. Modem, FPGA, IDU) | |||||||||||||
| CgenEquipMngSwIDUVersionsRunningVersion | 1.3.6.1.4.1.2281.10.4.1.13.1.1.4 | DisplayString | RO | mandatory | 9.0.0.0.0.295 | ||||||||
column · DisplayString · read-only · mandatory The running version. Example values from LibreNMS test devices
| |||||||||||||
| CgenEquipMngSwIDUVersionsInstalledVersion | 1.3.6.1.4.1.2281.10.4.1.13.1.1.5 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The installed version is similar to the running version, besides packages that are not currently running. Those packages will have in the running version 'N/A' while in the installed version there is a version number. For example, in equipment without daughter-board, some of the packages will be installed but not running. | |||||||||||||
| CgenEquipMngSwIDUVersionsUpgradePackage | 1.3.6.1.4.1.2281.10.4.1.13.1.1.6 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory In case the user performs an upgrade, this version will be the running/installed version | |||||||||||||
| CgenEquipMngSwIDUVersionsDowngradePackage | 1.3.6.1.4.1.2281.10.4.1.13.1.1.7 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory In case the user performs downgrade, this version will be the running/installed version. | |||||||||||||
| CgenEquipMngSwIDUVersionsResetType | 1.3.6.1.4.1.2281.10.4.1.13.1.1.8 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Minimum level of reset required to update the software in the relevant module.
| |||||||||||||
| TgenEquipMngSwTimerTable | 1.3.6.1.4.1.2281.10.4.1.13.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table contains all IDU running versions. | |||||||||||||
| RgenEquipMngSwTimerEntry | 1.3.6.1.4.1.2281.10.4.1.13.2.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Entry containing the info of the IDU Versions table. | |||||||||||||
| CgenEquipMngSwTimerSlotNumber | 1.3.6.1.4.1.2281.10.4.1.13.2.1.1 | INTEGER (1..6) | RO | mandatory | |||||||||
column · INTEGER (1..6) · read-only · mandatory The slot ID of the unit for this timer; 0 is for stand-alone units. | |||||||||||||
| CgenEquipMngSwTimerInstallationTimer | 1.3.6.1.4.1.2281.10.4.1.13.2.1.2 | INTEGER (1..1440) | RW | mandatory | |||||||||
column · INTEGER (1..1440) · read-write · mandatory The timer (in minutes) for software installation operations to this unit. | |||||||||||||
| CgenEquipMngSwTimerTimeToInstall | 1.3.6.1.4.1.2281.10.4.1.13.2.1.3 | INTEGER (1..86400) | RO | mandatory | |||||||||
column · INTEGER (1..86400) · read-only · mandatory The amount of time (in seconds) from now for the unit to perform software installation. Zero denotes that no operation has been requested. | |||||||||||||
| CgenEquipMngSwTimerTimerAbort | 1.3.6.1.4.1.2281.10.4.1.13.2.1.4 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This parameter is used to stop the count-down to the software update action.
| |||||||||||||
| SgenEquipMngSwFTPTimer | 1.3.6.1.4.1.2281.10.4.1.13.10 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Time (in seconds) until file transfer is failed. | |||||||||||||
| SgenEquipMngSwInstallationTimer | 1.3.6.1.4.1.2281.10.4.1.14 | INTEGER (1..1440) | RW | mandatory | |||||||||
scalar · INTEGER (1..1440) · read-write · mandatory The timer (in minutes) for timed software installation operations to this unit | |||||||||||||
| SgenEquipMngSwTimeToInstall | 1.3.6.1.4.1.2281.10.4.1.15 | INTEGER (1..1440) | RO | mandatory | |||||||||
scalar · INTEGER (1..1440) · read-only · mandatory The amount of time (in minutes) from now for the unit to perform software installation. Zero denotes that no operation has been requested | |||||||||||||
| SgenEquipMngSwUpgradeCommonRfuVersion | 1.3.6.1.4.1.2281.10.4.1.16 | DisplayString | RO | mandatory | |||||||||
scalar · DisplayString · read-only · mandatory This value indicates the Package version of the installed RFU SW. | |||||||||||||
| SgenEquipMngSwDowngradeCommonRfuVersion | 1.3.6.1.4.1.2281.10.4.1.17 | DisplayString | RO | mandatory | |||||||||
scalar · DisplayString · read-only · mandatory This value indicates the Package version of the installed RFU SW. | |||||||||||||
| TgenEquipMngSwFileTransferTable | 1.3.6.1.4.1.2281.10.4.1.18 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table allows configuring the details of the external server where software versions should be located. | |||||||||||||
| RgenEquipMngSwFileTransferEntry | 1.3.6.1.4.1.2281.10.4.1.18.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Entry containing the info of software management file transfer. | |||||||||||||
| CgenEquipMngSwFileTransferIndex | 1.3.6.1.4.1.2281.10.4.1.18.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The index of the table. | |||||||||||||
| CgenEquipMngSwFileTransferProtocol | 1.3.6.1.4.1.2281.10.4.1.18.1.2 | FtpProtocolType | RW | mandatory | |||||||||
column · FtpProtocolType · read-write · mandatory The protocol to use to transfer the files between the system and an external computer. | |||||||||||||
| CgenEquipMngSwFileTransferUserName | 1.3.6.1.4.1.2281.10.4.1.18.1.3 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory User name for access to the configuration files location. | |||||||||||||
| CgenEquipMngSwFileTransferPassword | 1.3.6.1.4.1.2281.10.4.1.18.1.4 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory Password for access to the software version files location. | |||||||||||||
| CgenEquipMngSwFileTransferAddress | 1.3.6.1.4.1.2281.10.4.1.18.1.5 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory IP address of the computer where software version files are to be taken from. | |||||||||||||
| CgenEquipMngSwFileTransferPath | 1.3.6.1.4.1.2281.10.4.1.18.1.6 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory Location of the files in the external server. | |||||||||||||
| CgenEquipMngSwFileTransferIpv6Address | 1.3.6.1.4.1.2281.10.4.1.18.1.7 | OCTET STRING (SIZE (0..16)) | RW | mandatory | |||||||||
column · OCTET STRING (SIZE (0..16)) · read-write · mandatory IPv6 Server Address. | |||||||||||||
| TgenEquipMngSwFileTransferStatusTable | 1.3.6.1.4.1.2281.10.4.1.19 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table shows the status of the current software version file transfer operation. | |||||||||||||
| RgenEquipMngSwFileTransferStatusEntry | 1.3.6.1.4.1.2281.10.4.1.19.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Entry containing the info of software management file transfer status. | |||||||||||||
| CgenEquipMngSwFileTransferStatusIndex | 1.3.6.1.4.1.2281.10.4.1.19.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The index of the table.. | |||||||||||||
| CgenEquipMngSwFileTransferStatusResult | 1.3.6.1.4.1.2281.10.4.1.19.1.2 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Status of the current file transfer operation.
| |||||||||||||
| CgenEquipMngSwFileTransferPercentageDone | 1.3.6.1.4.1.2281.10.4.1.19.1.3 | INTEGER (0..100) | RO | mandatory | |||||||||
column · INTEGER (0..100) · read-only · mandatory An indication of the progress of the process of the current file transfer operation. | |||||||||||||
| CgenEquipMngSwFileTransferPercentageDoneStandBy | 1.3.6.1.4.1.2281.10.4.1.19.1.4 | INTEGER (0..100) | RO | mandatory | |||||||||
column · INTEGER (0..100) · read-only · mandatory An indication of the progress of the process of the current internal file transfer operation. | |||||||||||||
| CgenEquipMngSwFileTransferStatusResultStandBy | 1.3.6.1.4.1.2281.10.4.1.19.1.5 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Status of the current internal file transfer operation.
| |||||||||||||
| TgenEquipMngSwInstallStatusTable | 1.3.6.1.4.1.2281.10.4.1.20 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table shows the status of the current software version installation operation. | |||||||||||||
| RgenEquipMngSwInstallStatusEntry | 1.3.6.1.4.1.2281.10.4.1.20.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Entry containing the info of software installation status. | |||||||||||||
| CgenEquipMngSwInstallStatusIndex | 1.3.6.1.4.1.2281.10.4.1.20.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The index of the table.. | |||||||||||||
| CgenEquipMngSwInstallStatusResult | 1.3.6.1.4.1.2281.10.4.1.20.1.2 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Status of the current installation operation.
| |||||||||||||
| CgenEquipMngSwInstallPercentageDone | 1.3.6.1.4.1.2281.10.4.1.20.1.3 | INTEGER (0..100) | RO | mandatory | |||||||||
column · INTEGER (0..100) · read-only · mandatory An indication of the progress of the process of the current installation operation. | |||||||||||||
| CgenEquipMngSwInstallStatusResultStandBy | 1.3.6.1.4.1.2281.10.4.1.20.1.4 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Status of the current file transfer operation.
| |||||||||||||
| CgenEquipMngSwInstallPercentageDoneStandBy | 1.3.6.1.4.1.2281.10.4.1.20.1.5 | INTEGER (0..100) | RO | mandatory | |||||||||
column · INTEGER (0..100) · read-only · mandatory An indication of the progress of the process of the current installation operation. | |||||||||||||
| TgenEquipMngSwOperationTable | 1.3.6.1.4.1.2281.10.4.1.21 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table allows downloading and installing SW versions. | |||||||||||||
| RgenEquipMngSwOperationEntry | 1.3.6.1.4.1.2281.10.4.1.21.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Entry containing the info of software management operation table. | |||||||||||||
| CgenEquipMngSwOperationIndex | 1.3.6.1.4.1.2281.10.4.1.21.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The index of the table.. | |||||||||||||
| CgenEquipMngSwOperationOperation | 1.3.6.1.4.1.2281.10.4.1.21.1.2 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The operation to be performed: download, install, update backup, swap boot section, abort installation timer.
| |||||||||||||
| CgenEquipMngSwOperationTimedInstallation | 1.3.6.1.4.1.2281.10.4.1.21.1.3 | NoYes | RW | mandatory | |||||||||
column · NoYes · read-write · mandatory Whether to perform the installation after a configurable timer expires. | |||||||||||||
| TgenEquipMngSwSlotRunningVersionTable | 1.3.6.1.4.1.2281.10.4.1.22 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table shows the versions currently running in cards installed in the system. | |||||||||||||
| RgenEquipMngSwSlotRunningVersionEntry | 1.3.6.1.4.1.2281.10.4.1.22.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory This table entry shows the versions currently running in cards installed in the system. | |||||||||||||
| CgenEquipMngSwSlotRunningVersionSlotId | 1.3.6.1.4.1.2281.10.4.1.22.1.1 | INTEGER (1..12) | RO | mandatory | |||||||||
column · INTEGER (1..12) · read-only · mandatory The index of the table.. | |||||||||||||
| CgenEquipMngSwSlotRunningVersionCardType | 1.3.6.1.4.1.2281.10.4.1.22.1.2 | InventoryCardType | RO | mandatory | |||||||||
column · InventoryCardType · read-only · mandatory Type of card inserted in slot. | |||||||||||||
| CgenEquipMngSwSlotRunningVersionComponent | 1.3.6.1.4.1.2281.10.4.1.22.1.3 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Name of SW functional component. | |||||||||||||
| CgenEquipMngSwSlotRunningVersionActualVersion | 1.3.6.1.4.1.2281.10.4.1.22.1.4 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Version of running SW. | |||||||||||||
| TgenEquipMngSwIDUVersionsStandByTable | 1.3.6.1.4.1.2281.10.4.1.23 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table shows the software versions residing in the standby unit. | |||||||||||||
| RgenEquipMngSwIDUVersionsStandByEntry | 1.3.6.1.4.1.2281.10.4.1.23.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory This table entry shows the software versions residing in the standby unit. | |||||||||||||
| CgenEquipMngSwIDUVersionsStandByIndex | 1.3.6.1.4.1.2281.10.4.1.23.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory mate rpm index. | |||||||||||||
| CgenEquipMngSwIDUVersionsStandByPackageName | 1.3.6.1.4.1.2281.10.4.1.23.1.2 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Name of the module which the software package belongs to. | |||||||||||||
| CgenEquipMngSwIDUVersionsStandByRunningVersion | 1.3.6.1.4.1.2281.10.4.1.23.1.3 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Version currently running. | |||||||||||||
| CgenEquipMngSwIDUVersionsStandByInstalledVersion | 1.3.6.1.4.1.2281.10.4.1.23.1.4 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Currently installed version; upon the appropriate reset this will become the running version. | |||||||||||||
| CgenEquipMngSwIDUVersionsStandByTargetDevice | 1.3.6.1.4.1.2281.10.4.1.23.1.5 | InventoryCardType | RO | mandatory | |||||||||
column · InventoryCardType · read-only · mandatory The HW board in which the SW module from the mate is running. | |||||||||||||
| CgenEquipMngSwIDUVersionsStandByDownloadedPackage | 1.3.6.1.4.1.2281.10.4.1.23.1.6 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Version that was downloaded from server upon installation, it will become the installed version. | |||||||||||||
| CgenEquipMngSwIDUVersionsStandByResetType | 1.3.6.1.4.1.2281.10.4.1.23.1.7 | VmResetType | RO | mandatory | |||||||||
column · VmResetType · read-only · mandatory Minimum level of reset required to update the software in the relevant module. | |||||||||||||
| SgenEquipMngSwWatchdogAdmin | 1.3.6.1.4.1.2281.10.4.1.35 | EnableDisable | RW | mandatory | |||||||||
scalar · EnableDisable · read-write · mandatory Enables/Disables the watchdog timer for the application. | |||||||||||||
| NgenEquipMngCfg | 1.3.6.1.4.1.2281.10.4.2 | ||||||||||||
| SgenEquipMngCfgBackupStatus | 1.3.6.1.4.1.2281.10.4.2.1 | ProgressStatus | RO | mandatory | |||||||||
scalar · ProgressStatus · read-only · mandatory This parameter shows the current state of the configuration backup files creation in the IDU. Possible values are: - ready(0) - inProgress(1) - success(2) - failure(3) | |||||||||||||
| SgenEquipMngCfgRestoreStatus | 1.3.6.1.4.1.2281.10.4.2.2 | ProgressStatus | RO | mandatory | |||||||||
scalar · ProgressStatus · read-only · mandatory This parameter shows the current state of configuration restoring from downloaded backup files. Possible values are: - ready(0) - inProgress(1) - success(2) - failure(3) | |||||||||||||
| SgenEquipMngCfgUploadStatus | 1.3.6.1.4.1.2281.10.4.2.3 | ProgressStatus | RO | mandatory | |||||||||
scalar · ProgressStatus · read-only · mandatory This parameter shows the current state of configuration backup files transfer from IDU to external FTP site. Possible values are: - ready(0) - inProgress(1) - success(2) - failure(3) | |||||||||||||
| SgenEquipMngCfgDownloadStatus | 1.3.6.1.4.1.2281.10.4.2.4 | ProgressStatus | RO | mandatory | |||||||||
scalar · ProgressStatus · read-only · mandatory This parameter shows the current state of configuration backup files transfer from external FTP site to IDU. Possible values are: - ready(0) - inProgress(1) - success(2) - failure(3) | |||||||||||||
| SgenEquipMngCfgCommand | 1.3.6.1.4.1.2281.10.4.2.5 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The command to be executed to backup/restore or upload/download configuration. If there is more then 1 slot in the NE, it is done for all the shelf.
| |||||||||||||
| SgenEquipMngCfgEthernetSwitchStoreConfiguration | 1.3.6.1.4.1.2281.10.4.2.6 | OffOn | RW | mandatory | |||||||||
scalar · OffOn · read-write · mandatory This parameter writes the current configuration in the database. This command should be called after any change to the following sections: - Bridge configuration - WaySide configuration - Protection configuration. | |||||||||||||
| SgenEquipMngCfgSetToDefaultKeepIp | 1.3.6.1.4.1.2281.10.4.2.7 | OffOn | RW | mandatory | |||||||||
scalar · OffOn · read-write · mandatory Set to Default configuration without changing the network parameters such as IP address, and subnet mask. | |||||||||||||
| SgenEquipMngCfgCliScriptFileName | 1.3.6.1.4.1.2281.10.4.2.8 | DisplayString | RW | mandatory | |||||||||
scalar · DisplayString · read-write · mandatory The CLI script file name to be downloaded to the NE. | |||||||||||||
| NgenEquipMngCfgGeneric | 1.3.6.1.4.1.2281.10.4.2.10 | ||||||||||||
| SgenEquipMngCfgBackupProgress | 1.3.6.1.4.1.2281.10.4.2.10.1 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory An indication of the progress of the backup operation process. | |||||||||||||
| SgenEquipMngCfgTimeToInstallation | 1.3.6.1.4.1.2281.10.4.2.10.2 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory A counter indicating the time left until installation begins. | |||||||||||||
| TgenEquipMngCfgFileTransferTable | 1.3.6.1.4.1.2281.10.4.2.11 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table allows configuring the details of the external server where configuration should be located. | |||||||||||||
| RgenEquipMngCfgFileTransferEntry | 1.3.6.1.4.1.2281.10.4.2.11.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory This table entry allows configuring the details of the external server where configuration should be located. | |||||||||||||
| CgenEquipMngCfgFileTransferIndex | 1.3.6.1.4.1.2281.10.4.2.11.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Index of the table. | |||||||||||||
| CgenEquipMngCfgFileTransferProtocol | 1.3.6.1.4.1.2281.10.4.2.11.1.2 | FtpProtocolType | RW | mandatory | |||||||||
column · FtpProtocolType · read-write · mandatory The protocol to use to transfer the files between the system and an external computer. | |||||||||||||
| CgenEquipMngCfgFileTransferUserName | 1.3.6.1.4.1.2281.10.4.2.11.1.3 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory User name for access to the configuration files location. | |||||||||||||
| CgenEquipMngCfgFileTransferPassword | 1.3.6.1.4.1.2281.10.4.2.11.1.4 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory Password for access to the configuration files location. | |||||||||||||
| CgenEquipMngCfgFileTransferAddress | 1.3.6.1.4.1.2281.10.4.2.11.1.5 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory IP address of the computer where configuration files are to be transferred to/from. | |||||||||||||
| CgenEquipMngCfgFileTransferPath | 1.3.6.1.4.1.2281.10.4.2.11.1.6 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory Location of the files in the external server. | |||||||||||||
| CgenEquipMngCfgFileTransferFileName | 1.3.6.1.4.1.2281.10.4.2.11.1.7 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory Name of the file in server. | |||||||||||||
| CgenEquipMngCfgFileTransferIpv6Address | 1.3.6.1.4.1.2281.10.4.2.11.1.8 | OCTET STRING (SIZE (0..16)) | RW | mandatory | |||||||||
column · OCTET STRING (SIZE (0..16)) · read-write · mandatory IPv6 Server's address where files will be transferred to/from. | |||||||||||||
| TgenEquipMngCfgFileTransferStatusTable | 1.3.6.1.4.1.2281.10.4.2.12 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table shows the status of the current configuration file transfer operation. | |||||||||||||
| RgenEquipMngCfgFileTransferStatusEntry | 1.3.6.1.4.1.2281.10.4.2.12.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory This table entry shows the status of the current configuration file transfer operation. | |||||||||||||
| CgenEquipMngCfgFileTransferStatusIndex | 1.3.6.1.4.1.2281.10.4.2.12.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Index of the table. | |||||||||||||
| CgenEquipMngCfgFileTransferStatusPercentageDone | 1.3.6.1.4.1.2281.10.4.2.12.1.2 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory An indication of the progress of the process of the current file transfer operation. | |||||||||||||
| CgenEquipMngCfgFileTransferStatusResult | 1.3.6.1.4.1.2281.10.4.2.12.1.3 | FileTransferStatus | RW | mandatory | |||||||||
column · FileTransferStatus · read-write · mandatory Status of the current file transfer operation. | |||||||||||||
| TgenEquipMngCfgOperationTable | 1.3.6.1.4.1.2281.10.4.2.13 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table allows creating, restoring, transferring and deleting configuration files. | |||||||||||||
| RgenEquipMngCfgOperationEntry | 1.3.6.1.4.1.2281.10.4.2.13.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory This table entry allows creating, restoring, transferring and deleting configuration files. | |||||||||||||
| CgenEquipMngCfgOperationIndex | 1.3.6.1.4.1.2281.10.4.2.13.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Index of the table. | |||||||||||||
| CgenEquipMngCfgOperationOperation | 1.3.6.1.4.1.2281.10.4.2.13.1.2 | CfgOper | RW | mandatory | |||||||||
column · CfgOper · read-write · mandatory The operation to be performed: backup, restore, delete, import, export. | |||||||||||||
| CgenEquipMngCfgOperationFileNumber | 1.3.6.1.4.1.2281.10.4.2.13.1.3 | INTEGER (1..3) | RW | mandatory | |||||||||
column · INTEGER (1..3) · read-write · mandatory A number from 1 to 3 to identify different restoration files. | |||||||||||||
| CgenEquipMngCfgOperationTimedInstallation | 1.3.6.1.4.1.2281.10.4.2.13.1.4 | NoYes | RW | mandatory | |||||||||
column · NoYes · read-write · mandatory Whether to install immediately or following a countdown from a defined counter. | |||||||||||||
| CgenEquipMngCfgOperationTimer | 1.3.6.1.4.1.2281.10.4.2.13.1.5 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory A timer which determines the time to installation. | |||||||||||||
| CgenEquipMngCfgOperationSlotNumber | 1.3.6.1.4.1.2281.10.4.2.13.1.6 | INTEGER (0..12) | RO | mandatory | |||||||||
column · INTEGER (0..12) · read-only · mandatory Slot number. | |||||||||||||
| TgenEquipMngCfgConfigurationFilesTable | 1.3.6.1.4.1.2281.10.4.2.14 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table shows the status of the current configuration management operation. | |||||||||||||
| RgenEquipMngCfgConfigurationFilesEntry | 1.3.6.1.4.1.2281.10.4.2.14.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory This table entry shows the status of the current configuration file transfer operation. | |||||||||||||
| CgenEquipMngCfgConfigurationFilesIndex | 1.3.6.1.4.1.2281.10.4.2.14.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Index of the table. | |||||||||||||
| CgenEquipMngCfgConfigurationFilesFileNumber | 1.3.6.1.4.1.2281.10.4.2.14.1.2 | INTEGER (1..3) | RO | mandatory | |||||||||
column · INTEGER (1..3) · read-only · mandatory A number from 1 to 3 to identify different restoration files. | |||||||||||||
| CgenEquipMngCfgConfigurationFilesSystemType | 1.3.6.1.4.1.2281.10.4.2.14.1.3 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Type of product from which the backup file was created. | |||||||||||||
| CgenEquipMngCfgConfigurationFilesSWVersion | 1.3.6.1.4.1.2281.10.4.2.14.1.4 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Software version of the system from which the backup file was created. | |||||||||||||
| CgenEquipMngCfgConfigurationFilesTimeDate | 1.3.6.1.4.1.2281.10.4.2.14.1.5 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Time and date of creation of the file. | |||||||||||||
| CgenEquipMngCfgConfigurationFilesSystemIP | 1.3.6.1.4.1.2281.10.4.2.14.1.6 | IpAddress | RO | mandatory | |||||||||
column · IpAddress · read-only · mandatory IP address of the unit from which the backup file was created. | |||||||||||||
| CgenEquipMngCfgConfigurationFilesCardsConfigured | 1.3.6.1.4.1.2281.10.4.2.14.1.7 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Types of cards for which configuration values exist in the file; when restoring other card types will get default values. | |||||||||||||
| CgenEquipMngCfgConfigurationFilesSystemID | 1.3.6.1.4.1.2281.10.4.2.14.1.8 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory System ID of the unit from which the backup file was created. | |||||||||||||
| SgenEquipMngCfgFileRestoreStatus | 1.3.6.1.4.1.2281.10.4.2.20 | FileRestoreStatus | RO | mandatory | |||||||||
scalar · FileRestoreStatus · read-only · mandatory Status of the operation of configuration restore from restore point. | |||||||||||||
| SgenEquipMngCfgFileTransferStatus | 1.3.6.1.4.1.2281.10.4.2.21 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Status of the operation of configuration restore from restore point.
| |||||||||||||
| NgenEquipMngFileTransfer | 1.3.6.1.4.1.2281.10.4.3 | ||||||||||||
| SgenEquipMngFileTransferFileTypeOper | 1.3.6.1.4.1.2281.10.4.3.1 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Operation for the file type to be transferred between the IDU and the external server. The options with prefix 'download' are files to be transferred from the server to the IDU. The options with prefix 'upload' are files to be transferred from the IDU to the server. To download IDU certificate, the OIDs genEquipSecurityCfgSecurityFileName, genEquipSecurityCfgSecurityFileFormat and genEquipSecurityCfgSecurityFileType should be set prior the operation of download security file. To upload CSR file, the OID genEquipSecurityCfgSecurityFileName should be set prior the operation of upload CSR file. To download CLI string, the OID genEquipMngCfgCliScriptFileName should be set prior the operation of download cli-script. To download warning banner file, the OID genEquipSecurityCfgWarningBannerFName should be set prior the operation of download warning-banner.
| |||||||||||||
| SgenEquipMngFileTransferDownloadConfigStatus | 1.3.6.1.4.1.2281.10.4.3.2 | ProgressStatus | RO | mandatory | |||||||||
scalar · ProgressStatus · read-only · mandatory The operation status of download configuration, which is performed using genEquipMngFileTransferFileTypeOper | |||||||||||||
| SgenEquipMngFileTransferDownloadCertificateStatus | 1.3.6.1.4.1.2281.10.4.3.3 | ProgressStatus | RO | mandatory | |||||||||
scalar · ProgressStatus · read-only · mandatory The operation status of download configuration, which is performed using genEquipMngFileTransferFileTypeOper | |||||||||||||
| SgenEquipMngFileTransferDownloadWarningBannerStatus | 1.3.6.1.4.1.2281.10.4.3.4 | ProgressStatus | RO | mandatory | |||||||||
scalar · ProgressStatus · read-only · mandatory The operation status of download warning banner, which is performed using genEquipMngFileTransferFileTypeOper | |||||||||||||
| SgenEquipMngFileTransferDownloadCliScriptStatus | 1.3.6.1.4.1.2281.10.4.3.5 | ProgressStatus | RO | mandatory | |||||||||
scalar · ProgressStatus · read-only · mandatory TThe operation status of download cli script, which is performed using genEquipMngFileTransferFileTypeOper | |||||||||||||
| SgenEquipMngFileTransferUploadConfigStatus | 1.3.6.1.4.1.2281.10.4.3.6 | ProgressStatus | RO | mandatory | |||||||||
scalar · ProgressStatus · read-only · mandatory The operation status of upload configuration, which is performed using genEquipMngFileTransferFileTypeOper | |||||||||||||
| SgenEquipMngFileTransferUploadCSRStatus | 1.3.6.1.4.1.2281.10.4.3.7 | ProgressStatus | RO | mandatory | |||||||||
scalar · ProgressStatus · read-only · mandatory The operation status of upload CSR, which is performed using genEquipMngFileTransferFileTypeOper | |||||||||||||
| SgenEquipMngFileTransferUploadUnitInfoStatus | 1.3.6.1.4.1.2281.10.4.3.8 | ProgressStatus | RO | mandatory | |||||||||
scalar · ProgressStatus · read-only · mandatory The operation status of upload unit info, which is performed using genEquipMngFileTransferFileTypeOper | |||||||||||||
| NgenEquipMngUnitInfo | 1.3.6.1.4.1.2281.10.4.4 | ||||||||||||
| NgenEquipMngUnitInfoGeneric | 1.3.6.1.4.1.2281.10.4.4.1 | ||||||||||||
| SgenEquipMngUnitInfoOperation | 1.3.6.1.4.1.2281.10.4.4.1.1 | CfgUnitInfoOper | RW | mandatory | |||||||||
scalar · CfgUnitInfoOper · read-write · mandatory Allows creating and exporting the unit information file. | |||||||||||||
| SgenEquipMngUnitInfoProgress | 1.3.6.1.4.1.2281.10.4.4.1.2 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Progress in percentage of the operation of the unit info file creation. | |||||||||||||
| SgenEquipMngUnitInfoStatus | 1.3.6.1.4.1.2281.10.4.4.1.3 | ProgressStatus | RO | mandatory | |||||||||
scalar · ProgressStatus · read-only · mandatory Status of the operation of the unit info file creation. | |||||||||||||
| TgenEquipMngUnitInfoFileTransferTable | 1.3.6.1.4.1.2281.10.4.4.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table allows configuring the details of the external server which the unit info file will be expoted to. | |||||||||||||
| RgenEquipMngUnitInfoFileTransferEntry | 1.3.6.1.4.1.2281.10.4.4.2.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory This table entry allows configuring the details of the external server which the unit info file will be expoted to. | |||||||||||||
| CgenEquipMngUnitInfoFileTransferIndex | 1.3.6.1.4.1.2281.10.4.4.2.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Index of the table. | |||||||||||||
| CgenEquipMngUnitInfoFileTransferProtocol | 1.3.6.1.4.1.2281.10.4.4.2.1.2 | FtpProtocolType | RW | mandatory | |||||||||
column · FtpProtocolType · read-write · mandatory The protocol to use to transfer the files between the system and an external computer. | |||||||||||||
| CgenEquipMngUnitInfoFileTransferUserName | 1.3.6.1.4.1.2281.10.4.4.2.1.3 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory User name for access to the files location. | |||||||||||||
| CgenEquipMngUnitInfoFileTransferPassword | 1.3.6.1.4.1.2281.10.4.4.2.1.4 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory Password for access to the files location. | |||||||||||||
| CgenEquipMngUnitInfoFileTransferAddress | 1.3.6.1.4.1.2281.10.4.4.2.1.5 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory IP address of the computer where the files are to be transferred to/from. | |||||||||||||
| CgenEquipMngUnitInfoFileTransferPath | 1.3.6.1.4.1.2281.10.4.4.2.1.6 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory Desired location of the unit info file in external server. | |||||||||||||
| CgenEquipMngUnitInfoFileTransferFileName | 1.3.6.1.4.1.2281.10.4.4.2.1.7 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory Name of the file in server. | |||||||||||||
| CgenEquipMngUnitInfoFileTransferIpv6Address | 1.3.6.1.4.1.2281.10.4.4.2.1.8 | OCTET STRING (SIZE (0..16)) | RW | mandatory | |||||||||
column · OCTET STRING (SIZE (0..16)) · read-write · mandatory IPv6 Server's Address to which he file will be transferred. | |||||||||||||
| TgenEquipMngUnitInfoFileTransferStatusTable | 1.3.6.1.4.1.2281.10.4.4.3 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table shows the status of the current configuration file transfer operation. | |||||||||||||
| RgenEquipMngUnitInfoFileTransferStatusEntry | 1.3.6.1.4.1.2281.10.4.4.3.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory This table entry shows the status of the current configuration file transfer operation. | |||||||||||||
| CgenEquipMngUnitInfoFileTransferStatusIndex | 1.3.6.1.4.1.2281.10.4.4.3.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Index of the table. | |||||||||||||
| CgenEquipMngUnitInfoFileTransferStatusPercentageDone | 1.3.6.1.4.1.2281.10.4.4.3.1.2 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory An indication of the progress of the process of the current file transfer operation. | |||||||||||||
| CgenEquipMngUnitInfoFileTransferStatusResult | 1.3.6.1.4.1.2281.10.4.4.3.1.3 | ProgressStatus | RW | mandatory | |||||||||
column · ProgressStatus · read-write · mandatory Status of the current file transfer operation. | |||||||||||||
| NgenEquipMngCli | 1.3.6.1.4.1.2281.10.4.5 | ||||||||||||
| SgenEquipMngCliScriptOperation | 1.3.6.1.4.1.2281.10.4.5.1 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Allows importing, showing, deleting and executing CLI scripts.
| |||||||||||||
| SgenEquipMngCliScriptOperationStatus | 1.3.6.1.4.1.2281.10.4.5.2 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Allows importing, showing, deleting and executing CLI scripts.
| |||||||||||||
| NgenEquipDiagAndMaintenance | 1.3.6.1.4.1.2281.10.10 | ||||||||||||
| SgenEquipDiagAndMaintenanceRadioLoopbackTimeout | 1.3.6.1.4.1.2281.10.10.1 | INTEGER (0..1440) | RW | mandatory | |||||||||
scalar · INTEGER (0..1440) · read-write · mandatory Radio loopback timeout, in minutes. 0 means no timer. | |||||||||||||
| SgenEquipDiagAndMaintenanceLineLoopbackTimeout | 1.3.6.1.4.1.2281.10.10.2 | INTEGER (0..1440) | RW | mandatory | |||||||||
scalar · INTEGER (0..1440) · read-write · mandatory Line loopback timeout, in minutes. 0 means no timer. | |||||||||||||
| SgenEquipDiagAndMaintenanceSDHLoopbackTimeout | 1.3.6.1.4.1.2281.10.10.3 | INTEGER (0..1440) | RW | mandatory | |||||||||
scalar · INTEGER (0..1440) · read-write · mandatory STM-1/OC-3 line loopback timeout, in minutes. 0 means no timer. | |||||||||||||
| NgenEquipSecurity | 1.3.6.1.4.1.2281.10.11 | ||||||||||||
| NgenEquipSecurityConfiguration | 1.3.6.1.4.1.2281.10.11.1 | ||||||||||||
| SgenEquipSecurityCfgUploadPublicKeyStatus | 1.3.6.1.4.1.2281.10.11.1.1 | ProgressStatus | RO | mandatory | |||||||||
scalar · ProgressStatus · read-only · mandatory The upload status of the Public key. | |||||||||||||
| SgenEquipSecurityCfgDownloadSecurityStatus | 1.3.6.1.4.1.2281.10.11.1.2 | ProgressStatus | RO | mandatory | |||||||||
scalar · ProgressStatus · read-only · mandatory The download status of the digital certificate. | |||||||||||||
| SgenEquipSecurityCfgSecurityFileName | 1.3.6.1.4.1.2281.10.11.1.3 | DisplayString | RW | mandatory | |||||||||
scalar · DisplayString · read-write · mandatory The certificate file name to be downloaded. | |||||||||||||
| SgenEquipSecurityCfgSecurityFileType | 1.3.6.1.4.1.2281.10.11.1.4 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The digital certificate file type.
| |||||||||||||
| SgenEquipSecurityCfgSecurityFileFormat | 1.3.6.1.4.1.2281.10.11.1.5 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The certificate file format. .pem - (Privacy Enhanced Mail) Base64 encoded DER certificate, enclosed between -----BEGIN CERTIFICATE----- and -----END CERTIFICATE----- .der is a subset of Basic Encoding Rules (BER) providing for exactly one way to encode an ASN.1 value.
| |||||||||||||
| SgenEquipSecurityCfgSecurityWebCertificateAdmin | 1.3.6.1.4.1.2281.10.11.1.6 | EnableDisable | RW | mandatory | |||||||||
scalar · EnableDisable · read-write · mandatory The admin state of the certificate. | |||||||||||||
| SgenEquipSecurityCfgWebProtocol | 1.3.6.1.4.1.2281.10.11.1.7 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Use unsecure http or secure https.
| |||||||||||||
| SgenEquipSecurityCfgTelnetAdmin | 1.3.6.1.4.1.2281.10.11.1.8 | EnableDisable | RW | mandatory | |||||||||
scalar · EnableDisable · read-write · mandatory Enable or disable the Telnet server on the NE. | |||||||||||||
| SgenEquipSecurityCfgAutoLogOutPeriod | 1.3.6.1.4.1.2281.10.11.1.9 | INTEGER (1..60) | RW | mandatory | |||||||||
scalar · INTEGER (1..60) · read-write · mandatory Auto logout period for CLI or web users, (1-60 seconds) | |||||||||||||
| NgenEquipSecurityXFTP | 1.3.6.1.4.1.2281.10.11.1.10 | ||||||||||||
| SgenEquipSecurityXFTPHostIP | 1.3.6.1.4.1.2281.10.11.1.10.1 | IpAddress | RW | mandatory | |||||||||
scalar · IpAddress · read-write · mandatory The FTP/SFTP host IP address. | |||||||||||||
| SgenEquipSecurityXFTPHostPath | 1.3.6.1.4.1.2281.10.11.1.10.2 | DisplayString | RW | mandatory | |||||||||
scalar · DisplayString · read-write · mandatory The FTP/SFTP host directory path. | |||||||||||||
| SgenEquipSecurityXFTPProtocol | 1.3.6.1.4.1.2281.10.11.1.10.3 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Either FTP or SFTP to be used.
| |||||||||||||
| SgenEquipSecurityXFTPUserName | 1.3.6.1.4.1.2281.10.11.1.10.4 | DisplayString | RW | mandatory | |||||||||
scalar · DisplayString · read-write · mandatory FTP User name. | |||||||||||||
| SgenEquipSecurityXFTPPassword | 1.3.6.1.4.1.2281.10.11.1.10.5 | DisplayString | RW | mandatory | |||||||||
scalar · DisplayString · read-write · mandatory FTP User password. | |||||||||||||
| SgenEquipSecurityCfgPassFirstLoginChange | 1.3.6.1.4.1.2281.10.11.1.11 | NoYes | RW | mandatory | |||||||||
scalar · NoYes · read-write · mandatory Define whether user's first login will be required to change it password or not | |||||||||||||
| SgenEquipSecurityCfgCSRCreation | 1.3.6.1.4.1.2281.10.11.1.12 | DisplayString (SIZE (0..512)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (0..512)) · read-write · mandatory This command create CSR file of the element. The file could be uploaded to external server by using the genEquipMngFileTransferFileTypeOper OID. The command syntax should be: <country_name> <state> <locality_name> <organization_name> <organization_unit_name> <common_name> <email_addr>. All the fields must be referred, for skipping on any field, use 'symbol instead'. | |||||||||||||
| SgenEquipSecurityCfgWarningBannerFName | 1.3.6.1.4.1.2281.10.11.1.13 | DisplayString | RW | mandatory | |||||||||
scalar · DisplayString · read-write · mandatory The Warning Banner file name to be downloaded to the NE. | |||||||||||||
| NgenEquipSecurityConfigurationRadius | 1.3.6.1.4.1.2281.10.11.1.14 | ||||||||||||
| SgenEquipSecurityConfigurationRadiusAdmin | 1.3.6.1.4.1.2281.10.11.1.14.1 | EnableDisable | RW | mandatory | |||||||||
scalar · EnableDisable · read-write · mandatory this parameter configures the admin state of the RADIUS protocol; when enabled, all users will be logged in via RADIUS server | |||||||||||||
| SgenEquipSecurityConfigurationRadiusServerIP | 1.3.6.1.4.1.2281.10.11.1.14.2 | IpAddress | RW | mandatory | |||||||||
scalar · IpAddress · read-write · mandatory this parameter configures the IP address of the RADIUS server | |||||||||||||
| SgenEquipSecurityConfigurationRadiusSecret | 1.3.6.1.4.1.2281.10.11.1.14.3 | DisplayString | RW | mandatory | |||||||||
scalar · DisplayString · read-write · mandatory this parameter configures the common secret between the agent and the RADIUS server | |||||||||||||
| SgenEquipSecurityConfigurationRadiusPort | 1.3.6.1.4.1.2281.10.11.1.14.4 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory this parameter configures the IP address of UDP port used for the RADIUS protocol | |||||||||||||
| SgenEquipSecurityConfigurationRadiusRetries | 1.3.6.1.4.1.2281.10.11.1.14.5 | INTEGER (1..10) | RW | mandatory | |||||||||
scalar · INTEGER (1..10) · read-write · mandatory this parameter configures the number of times the agent will retry to communicate with the RADIUS server before declaring the server to be unreacheable | |||||||||||||
| SgenEquipSecurityConfigurationRadiusTimeout | 1.3.6.1.4.1.2281.10.11.1.14.6 | INTEGER (3..30) | RW | mandatory | |||||||||
scalar · INTEGER (3..30) · read-write · mandatory this parameter configures the number of times the agent will retry to communicate with the RADIUS server before declaring the server to be unreacheable | |||||||||||||
| NgenEquipSecurityUsersAndGroups | 1.3.6.1.4.1.2281.10.11.2 | ||||||||||||
| TgenEquipSecurityUsersTable | 1.3.6.1.4.1.2281.10.11.2.1 | NA | mandatory | ||||||||||
table · not-accessible · mandatory User table. | |||||||||||||
| RgenEquipSecurityUsersEntry | 1.3.6.1.4.1.2281.10.11.2.1.1 | NA | mandatory | ||||||||||
| CgenEquipSecurityUsersName | 1.3.6.1.4.1.2281.10.11.2.1.1.1 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory This value is the user name. | |||||||||||||
| CgenEquipSecurityUsersPasswd | 1.3.6.1.4.1.2281.10.11.2.1.1.2 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory This value is the user's password. It is used only in the creation phase. To change the password, you need to use the genEquipSecurityUsersAndGroupsChangePasswd command | |||||||||||||
| CgenEquipSecurityUsersPriviledge | 1.3.6.1.4.1.2281.10.11.2.1.1.3 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This value is the users privilege.
| |||||||||||||
| CgenEquipSecurityUsersPasswdAging | 1.3.6.1.4.1.2281.10.11.2.1.1.4 | INTEGER (0..90) | RW | mandatory | |||||||||
column · INTEGER (0..90) · read-write · mandatory This value is the user's password aging time (in days). When response is 99999 the meaning is No Aging. | |||||||||||||
| CgenEquipSecurityUsersExprDate | 1.3.6.1.4.1.2281.10.11.2.1.1.5 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This value is the user's password expiration date. The value is presented in time_t format. When response is -1 the meaning is Never Expired. | |||||||||||||
| CgenEquipSecurityUsersLastLogin | 1.3.6.1.4.1.2281.10.11.2.1.1.6 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory This value is the user last login date. Time in seconds since January 1, 1970 00:00 UTC. | |||||||||||||
| CgenEquipSecurityUsersRowStatus | 1.3.6.1.4.1.2281.10.11.2.1.1.30 | RowStatus | RW | mandatory | |||||||||
column · RowStatus · read-write · mandatory This value is the status of the entry. | |||||||||||||
| SgenEquipSecurityUsersAndGroupsChangePasswd | 1.3.6.1.4.1.2281.10.11.2.2 | DisplayString | RW | mandatory | |||||||||
scalar · DisplayString · read-write · mandatory This command changes the user password at the command line. It takes all arguments as the command. It cannot be done through the table since it needs to provide the old password as well. The format is: '<username> <old-password> <new-password>' seperated with spaces. | |||||||||||||
| NgenEquipSecuritySNMP | 1.3.6.1.4.1.2281.10.11.3 | ||||||||||||
| SgenEquipSecuritySNMPReadCommunity | 1.3.6.1.4.1.2281.10.11.3.1 | DisplayString | RW | mandatory | |||||||||
scalar · DisplayString · read-write · mandatory This is the SNMP Read community string | |||||||||||||
| SgenEquipSecuritySNMPWriteCommunity | 1.3.6.1.4.1.2281.10.11.3.2 | DisplayString | RW | mandatory | |||||||||
scalar · DisplayString · read-write · mandatory This is the SNMP Write community string | |||||||||||||
| NgenEquipSecuritySNMPV3 | 1.3.6.1.4.1.2281.10.11.3.10 | ||||||||||||
| TgenEquipSecuritySNMPV3AuthTable | 1.3.6.1.4.1.2281.10.11.3.10.1 | NA | mandatory | ||||||||||
table · not-accessible · mandatory Security General File Transfer Configuration Table. | |||||||||||||
| RgenEquipSecuritySNMPV3AuthEntry | 1.3.6.1.4.1.2281.10.11.3.10.1.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Security General File Transfer Configuration Table | |||||||||||||
| CgenEquipSecuritySNMPV3AuthUserName | 1.3.6.1.4.1.2281.10.11.3.10.1.1.1 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory This value is the V3 user name and the index of file v3 Authentication table. | |||||||||||||
| CgenEquipSecuritySNMPV3AuthPassword | 1.3.6.1.4.1.2281.10.11.3.10.1.1.2 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory This value is file V3 user authentication password. | |||||||||||||
| CgenEquipSecuritySNMPV3AuthSecurityMode | 1.3.6.1.4.1.2281.10.11.3.10.1.1.3 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This is the user's security mode
| |||||||||||||
| CgenEquipSecuritySNMPV3AuthEncryptionMode | 1.3.6.1.4.1.2281.10.11.3.10.1.1.4 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This is the V3 encryption mode.
| |||||||||||||
| CgenEquipSecuritySNMPV3AuthAuthenticationAlgorithm | 1.3.6.1.4.1.2281.10.11.3.10.1.1.5 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This is the V3 authentication algorithm.
| |||||||||||||
| CgenEquipSecuritySNMPV3AuthAccessMode | 1.3.6.1.4.1.2281.10.11.3.10.1.1.6 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This is the V3 user access mode.
| |||||||||||||
| CgenEquipSecuritySNMPV3AuthRowStatus | 1.3.6.1.4.1.2281.10.11.3.10.1.1.30 | RowStatus | RW | mandatory | |||||||||
column · RowStatus · read-write · mandatory This is the row status. | |||||||||||||
| NgenEquipSecurityGen | 1.3.6.1.4.1.2281.10.11.4 | ||||||||||||
| TgenEquipSecurityGenFTConfigTable | 1.3.6.1.4.1.2281.10.11.4.1 | NA | mandatory | ||||||||||
table · not-accessible · mandatory Security General File Transfer Configuration Table. | |||||||||||||
| RgenEquipSecurityGenFTConfigEntry | 1.3.6.1.4.1.2281.10.11.4.1.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Security General File Transfer Configuration Table | |||||||||||||
| CgenEquipSecurityGenFTConfigIndex | 1.3.6.1.4.1.2281.10.11.4.1.1.1 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This value is the index of file transfer table. | |||||||||||||
| CgenEquipSecurityGenFTConfigProtocol | 1.3.6.1.4.1.2281.10.11.4.1.1.2 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This value is file transfer protocol.
| |||||||||||||
| CgenEquipSecurityGenFTConfigUsername | 1.3.6.1.4.1.2281.10.11.4.1.1.3 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory This value is the user's name | |||||||||||||
| CgenEquipSecurityGenFTConfigPassword | 1.3.6.1.4.1.2281.10.11.4.1.1.4 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory This value is the users password. | |||||||||||||
| CgenEquipSecurityGenFTConfigAddress | 1.3.6.1.4.1.2281.10.11.4.1.1.5 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory This value is the server IP. | |||||||||||||
| CgenEquipSecurityGenFTConfigFilePath | 1.3.6.1.4.1.2281.10.11.4.1.1.6 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory This value is file path. | |||||||||||||
| CgenEquipSecurityGenFTConfigFileName | 1.3.6.1.4.1.2281.10.11.4.1.1.7 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory This value is the file name. | |||||||||||||
| CgenEquipSecurityGenFTConfigIpV6Address | 1.3.6.1.4.1.2281.10.11.4.1.1.8 | OCTET STRING (SIZE (0..16)) | RW | mandatory | |||||||||
column · OCTET STRING (SIZE (0..16)) · read-write · mandatory IP address v6 of the server, where the file are to be transferred to/from. | |||||||||||||
| TgenEquipSecurityGenFTStatusTable | 1.3.6.1.4.1.2281.10.11.4.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory Security General File Transfer Status Table. | |||||||||||||
| RgenEquipSecurityGenFTStatusEntry | 1.3.6.1.4.1.2281.10.11.4.2.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Security General File Transfer Status Table. | |||||||||||||
| CgenEquipSecurityGenFTStatusIndex | 1.3.6.1.4.1.2281.10.11.4.2.1.1 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This value is the index of file transfer status table. | |||||||||||||
| CgenEquipSecurityGenFTStatusStatus | 1.3.6.1.4.1.2281.10.11.4.2.1.2 | FTStatus | RO | mandatory | |||||||||
column · FTStatus · read-only · mandatory File transfer operation status. | |||||||||||||
| CgenEquipSecurityGenFTStatusProgress | 1.3.6.1.4.1.2281.10.11.4.2.1.3 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Process prcentage | |||||||||||||
| SgenEquipSecurityGenFTOperations | 1.3.6.1.4.1.2281.10.11.4.11 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory File transfer operations
| |||||||||||||
| SgenEquipSecurityGenImportExportAdmin | 1.3.6.1.4.1.2281.10.11.4.12 | EnableDisable | RW | mandatory | |||||||||
scalar · EnableDisable · read-write · mandatory Admin for import or export security settings | |||||||||||||
| NgenEquipSecurityAccessControl | 1.3.6.1.4.1.2281.10.11.5 | ||||||||||||
| TgenEquipSecurityAccessControlProfileTable | 1.3.6.1.4.1.2281.10.11.5.1 | NA | mandatory | ||||||||||
table · not-accessible · mandatory Security Access Control Profile Table. | |||||||||||||
| RgenEquipSecurityAccessControlProfileEntry | 1.3.6.1.4.1.2281.10.11.5.1.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Security Access Control Profile Table Entry | |||||||||||||
| CgenEquipSecurityAccessControlProfileName | 1.3.6.1.4.1.2281.10.11.5.1.1.1 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory User profile name. | |||||||||||||
| CgenEquipSecurityAccessControlProfileChannel | 1.3.6.1.4.1.2281.10.11.5.1.1.2 | INTEGER (0..127) | RW | mandatory | |||||||||
column · INTEGER (0..127) · read-write · mandatory Permitted access channels. | |||||||||||||
| CgenEquipSecurityAccessControlProfileUsed | 1.3.6.1.4.1.2281.10.11.5.1.1.3 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Indicate whether the profile in used | |||||||||||||
| CgenEquipSecurityAccessControlProfileSecurityWrite | 1.3.6.1.4.1.2281.10.11.5.1.1.4 | RbacAccessLevel | RW | mandatory | |||||||||
column · RbacAccessLevel · read-write · mandatory Security functional write access level. | |||||||||||||
| CgenEquipSecurityAccessControlProfileSecurityRead | 1.3.6.1.4.1.2281.10.11.5.1.1.5 | RbacAccessLevel | RW | mandatory | |||||||||
column · RbacAccessLevel · read-write · mandatory Security functional read access level. | |||||||||||||
| CgenEquipSecurityAccessControlProfileMngWrite | 1.3.6.1.4.1.2281.10.11.5.1.1.6 | RbacAccessLevel | RW | mandatory | |||||||||
column · RbacAccessLevel · read-write · mandatory Management functional write access level. | |||||||||||||
| CgenEquipSecurityAccessControlProfileMngRead | 1.3.6.1.4.1.2281.10.11.5.1.1.7 | RbacAccessLevel | RW | mandatory | |||||||||
column · RbacAccessLevel · read-write · mandatory Management functional read access level. | |||||||||||||
| CgenEquipSecurityAccessControlProfileRadioWrite | 1.3.6.1.4.1.2281.10.11.5.1.1.8 | RbacAccessLevel | RW | mandatory | |||||||||
column · RbacAccessLevel · read-write · mandatory Radio functional write access level. | |||||||||||||
| CgenEquipSecurityAccessControlProfileRadioRead | 1.3.6.1.4.1.2281.10.11.5.1.1.9 | RbacAccessLevel | RW | mandatory | |||||||||
column · RbacAccessLevel · read-write · mandatory Radio functional read access level. | |||||||||||||
| CgenEquipSecurityAccessControlProfileTDMWrite | 1.3.6.1.4.1.2281.10.11.5.1.1.10 | RbacAccessLevel | RW | mandatory | |||||||||
column · RbacAccessLevel · read-write · mandatory TDM functional write access level. | |||||||||||||
| CgenEquipSecurityAccessControlProfileTDMRead | 1.3.6.1.4.1.2281.10.11.5.1.1.11 | RbacAccessLevel | RW | mandatory | |||||||||
column · RbacAccessLevel · read-write · mandatory TDM functional read access level. | |||||||||||||
| CgenEquipSecurityAccessControlProfileEthWrite | 1.3.6.1.4.1.2281.10.11.5.1.1.12 | RbacAccessLevel | RW | mandatory | |||||||||
column · RbacAccessLevel · read-write · mandatory Ether functional write access level. | |||||||||||||
| CgenEquipSecurityAccessControlProfileEthRead | 1.3.6.1.4.1.2281.10.11.5.1.1.13 | RbacAccessLevel | RW | mandatory | |||||||||
column · RbacAccessLevel · read-write · mandatory Ether functional read access level. | |||||||||||||
| CgenEquipSecurityAccessControlProfileSyncWrite | 1.3.6.1.4.1.2281.10.11.5.1.1.14 | RbacAccessLevel | RW | mandatory | |||||||||
column · RbacAccessLevel · read-write · mandatory Sync functional write access level. | |||||||||||||
| CgenEquipSecurityAccessControlProfileSyncRead | 1.3.6.1.4.1.2281.10.11.5.1.1.15 | RbacAccessLevel | RW | mandatory | |||||||||
column · RbacAccessLevel · read-write · mandatory Sync functional read access level. | |||||||||||||
| CgenEquipSecurityAccessControlProfileRowStatus | 1.3.6.1.4.1.2281.10.11.5.1.1.30 | RowStatus | RW | mandatory | |||||||||
column · RowStatus · read-write · mandatory Row Status for Profile table. | |||||||||||||
| TgenEquipSecurityAccessControlUserTable | 1.3.6.1.4.1.2281.10.11.5.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory Security Access Control User Table. | |||||||||||||
| RgenEquipSecurityAccessControlUserEntry | 1.3.6.1.4.1.2281.10.11.5.2.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Security Access Control User Table Entry | |||||||||||||
| CgenEquipSecurityAccessControlUserName | 1.3.6.1.4.1.2281.10.11.5.2.1.1 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory User name. | |||||||||||||
| CgenEquipSecurityAccessControlUserProfile | 1.3.6.1.4.1.2281.10.11.5.2.1.2 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory User's profile name. | |||||||||||||
| CgenEquipSecurityAccessControlUserPassword | 1.3.6.1.4.1.2281.10.11.5.2.1.3 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory User's password | |||||||||||||
| CgenEquipSecurityAccessControlUserExpired | 1.3.6.1.4.1.2281.10.11.5.2.1.4 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory expired date of user account. | |||||||||||||
| CgenEquipSecurityAccessControlUserBlock | 1.3.6.1.4.1.2281.10.11.5.2.1.5 | NoYes | RW | mandatory | |||||||||
column · NoYes · read-write · mandatory Block user account. | |||||||||||||
| CgenEquipSecurityAccessControlUserLastLogout | 1.3.6.1.4.1.2281.10.11.5.2.1.6 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Current login indication. | |||||||||||||
| CgenEquipSecurityAccessControlUserLoggedIn | 1.3.6.1.4.1.2281.10.11.5.2.1.7 | NoYes | RW | mandatory | |||||||||
column · NoYes · read-write · mandatory Current login indication. | |||||||||||||
| CgenEquipSecurityAccessControlUserRowStatus | 1.3.6.1.4.1.2281.10.11.5.2.1.30 | RowStatus | RW | mandatory | |||||||||
column · RowStatus · read-write · mandatory Row Status for users table. | |||||||||||||
| SgenEquipSecurityAccessControlPassEnforceStrength | 1.3.6.1.4.1.2281.10.11.5.11 | NoYes | RW | mandatory | |||||||||
scalar · NoYes · read-write · mandatory Enforce strength password. | |||||||||||||
| SgenEquipSecurityAccessControlPassFirstLoginChange | 1.3.6.1.4.1.2281.10.11.5.12 | NoYes | RW | mandatory | |||||||||
scalar · NoYes · read-write · mandatory Password change for first login. | |||||||||||||
| SgenEquipSecurityAccessControlPassAging | 1.3.6.1.4.1.2281.10.11.5.13 | NoYes | RW | mandatory | |||||||||
scalar · NoYes · read-write · mandatory Password aging. | |||||||||||||
| SgenEquipSecurityAccessControlFailureLoginAttempt | 1.3.6.1.4.1.2281.10.11.5.14 | INTEGER (1..10) | RW | mandatory | |||||||||
scalar · INTEGER (1..10) · read-write · mandatory Failure login threshold blocking user account. | |||||||||||||
| SgenEquipSecurityAccessControlBlockFailureLoginPeriod | 1.3.6.1.4.1.2281.10.11.5.15 | INTEGER (0..60) | RW | mandatory | |||||||||
scalar · INTEGER (0..60) · read-write · mandatory Blocking period due to failure login. | |||||||||||||
| SgenEquipSecurityAccessControlBlockunusedAccount | 1.3.6.1.4.1.2281.10.11.5.16 | INTEGER (0..90) | RW | mandatory | |||||||||
scalar · INTEGER (0..90) · read-write · mandatory Period time for block unused account. | |||||||||||||
| SgenEquipSecurityAccessControlBlockRootRemote | 1.3.6.1.4.1.2281.10.11.5.17 | NoYes | RW | mandatory | |||||||||
scalar · NoYes · read-write · mandatory Root remote access. | |||||||||||||
| NgenEquipSecurityProtocolsControl | 1.3.6.1.4.1.2281.10.11.6 | ||||||||||||
| SgenEquipSecurityProtocolsControlAutoSessionTimeOut | 1.3.6.1.4.1.2281.10.11.6.1 | INTEGER (1..60) | RW | mandatory | |||||||||
scalar · INTEGER (1..60) · read-write · mandatory Logout session after incativity timeout. | |||||||||||||
| SgenEquipSecurityProtocolsControlSNMPAdmin | 1.3.6.1.4.1.2281.10.11.6.2 | EnableDisable | RW | mandatory | |||||||||
scalar · EnableDisable · read-write · mandatory SNMP Admin. | |||||||||||||
| SgenEquipSecurityProtocolsControlSNMPOperStatus | 1.3.6.1.4.1.2281.10.11.6.3 | DownUp | RO | mandatory | |||||||||
scalar · DownUp · read-only · mandatory SNMP Operational Status. | |||||||||||||
| SgenEquipSecurityProtocolsControlSNMPTrapVersion | 1.3.6.1.4.1.2281.10.11.6.4 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory SNMP Trap version.
| |||||||||||||
| SgenEquipSecurityProtocolsControlSNMPMIBVersion | 1.3.6.1.4.1.2281.10.11.6.5 | DisplayString | RO | mandatory | |||||||||
scalar · DisplayString · read-only · mandatory SNMP MIB version. | |||||||||||||
| SgenEquipSecurityProtocolsControlSNMPV1V2Blocked | 1.3.6.1.4.1.2281.10.11.6.6 | NoYes | RW | mandatory | |||||||||
scalar · NoYes · read-write · mandatory SNMP V1V2 is blocked. | |||||||||||||
| SgenEquipSecurityProtocolsControlHTTPAdmin | 1.3.6.1.4.1.2281.10.11.6.7 | EnableDisable | RW | mandatory | |||||||||
scalar · EnableDisable · read-write · mandatory HTTP Admin. | |||||||||||||
| NgenEquipSecurityMonitorAndLogs | 1.3.6.1.4.1.2281.10.11.7 | ||||||||||||
| TgenEquipSecurityConfigLogUploadConfigTable | 1.3.6.1.4.1.2281.10.11.7.1 | NA | mandatory | ||||||||||
table · not-accessible · mandatory Config Log Upload Configuration. | |||||||||||||
| RgenEquipSecurityConfigLogUploadConfigEntry | 1.3.6.1.4.1.2281.10.11.7.1.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Config Log Upload Configuration Table Entry | |||||||||||||
| CgenEquipSecurityConfigLogUploadConfigIndex | 1.3.6.1.4.1.2281.10.11.7.1.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Config Log Upload Configuration index. has Fixed value of 1 | |||||||||||||
| CgenEquipSecurityConfigLogUploadConfigProtocol | 1.3.6.1.4.1.2281.10.11.7.1.1.2 | FtpProtocolType | RW | mandatory | |||||||||
column · FtpProtocolType · read-write · mandatory Config Log Upload Configuration Protocol. | |||||||||||||
| CgenEquipSecurityConfigLogUploadConfigUsername | 1.3.6.1.4.1.2281.10.11.7.1.1.3 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory Config Log Upload Username | |||||||||||||
| CgenEquipSecurityConfigLogUploadConfigPassword | 1.3.6.1.4.1.2281.10.11.7.1.1.4 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory Config Log Upload Configuration Password. | |||||||||||||
| CgenEquipSecurityConfigLogUploadConfigIpaddress | 1.3.6.1.4.1.2281.10.11.7.1.1.5 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory Config Log Upload Configuration ip address (Ipv4). | |||||||||||||
| CgenEquipSecurityConfigLogUploadConfigPath | 1.3.6.1.4.1.2281.10.11.7.1.1.6 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory Config Log Upload Configuration Path. | |||||||||||||
| CgenEquipSecurityConfigLogUploadConfigFilename | 1.3.6.1.4.1.2281.10.11.7.1.1.7 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory Config Log Upload Configuration Filename. | |||||||||||||
| CgenEquipSecurityConfigLogUploadConfigIpV6Address | 1.3.6.1.4.1.2281.10.11.7.1.1.8 | OCTET STRING (SIZE (0..16)) | RW | mandatory | |||||||||
column · OCTET STRING (SIZE (0..16)) · read-write · mandatory Config Log Upload Configuration ip address (Ipv6). | |||||||||||||
| TgenEquipSecurityConfigLogUploadStatusTable | 1.3.6.1.4.1.2281.10.11.7.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory Config Log Upload Status. | |||||||||||||
| RgenEquipSecurityConfigLogUploadStatusEntry | 1.3.6.1.4.1.2281.10.11.7.2.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Config Log Upload Status Table Entry | |||||||||||||
| CgenEquipSecurityConfigLogUploadStatusIndex | 1.3.6.1.4.1.2281.10.11.7.2.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Config Log Upload Status index. has Fixed value of 1 | |||||||||||||
| CgenEquipSecurityConfigLogUploadStatusStatus | 1.3.6.1.4.1.2281.10.11.7.2.1.2 | FileTransferStatus | RW | mandatory | |||||||||
column · FileTransferStatus · read-write · mandatory Config Log Upload Configuration Protocol. | |||||||||||||
| CgenEquipSecurityConfigLogUploadStatusPrcntg | 1.3.6.1.4.1.2281.10.11.7.2.1.3 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Progress status in percentage. | |||||||||||||
| SgenEquipSecurityConfigLogUpload | 1.3.6.1.4.1.2281.10.11.7.10 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Configuration Log Upload.
| |||||||||||||
| NgenEquipSecurityRadiusServer | 1.3.6.1.4.1.2281.10.11.8 | ||||||||||||
| TgenEquipSecurityRadiusServerConfigurationTable | 1.3.6.1.4.1.2281.10.11.8.1 | NA | mandatory | ||||||||||
table · not-accessible · mandatory Radius configuration table. | |||||||||||||
| RgenEquipSecurityRadiusServerConfigurationEntry | 1.3.6.1.4.1.2281.10.11.8.1.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Radius configuration table Entry | |||||||||||||
| CgenEquipSecurityAccessControlRadiusServerId | 1.3.6.1.4.1.2281.10.11.8.1.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Server id: 1 - primary, 2-secondary | |||||||||||||
| CgenEquipSecurityAccessControlRadiusServerIpV4Address | 1.3.6.1.4.1.2281.10.11.8.1.1.2 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory The IP address of the RADIUS Server. | |||||||||||||
| CgenEquipSecurityAccessControlRadiusServerIpv6Address | 1.3.6.1.4.1.2281.10.11.8.1.1.3 | OCTET STRING (SIZE (0..16)) | RW | mandatory | |||||||||
column · OCTET STRING (SIZE (0..16)) · read-write · mandatory The IP address of the RADIUS Server | |||||||||||||
| CgenEquipSecurityAccessControlRadiusServerPort | 1.3.6.1.4.1.2281.10.11.8.1.1.4 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The port ID of the RADIUS protocol in the RADIUS Server. | |||||||||||||
| CgenEquipSecurityAccessControlRadiusServerRetries | 1.3.6.1.4.1.2281.10.11.8.1.1.5 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The number of times the agent will retry to communicate with the selected RADIUS server before declaring the server to be not reachable. | |||||||||||||
| CgenEquipSecurityAccessControlRadiusServerTimeout | 1.3.6.1.4.1.2281.10.11.8.1.1.6 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The timeout that the agent will wait in each communication with the selected RADIUS server before retrying if no response is received. | |||||||||||||
| CgenEquipSecurityAccessControlRadiusServerSharedSecret | 1.3.6.1.4.1.2281.10.11.8.1.1.7 | OCTET STRING | RW | mandatory | |||||||||
column · OCTET STRING · read-write · mandatory The shared secret of the Radius Server. | |||||||||||||
| CgenEquipSecurityAccessControlRadiusServerConnectivityStatus | 1.3.6.1.4.1.2281.10.11.8.1.1.8 | EnableDisable | RO | mandatory | |||||||||
column · EnableDisable · read-only · mandatory The connectivity status of the RADIUS server in the last login tried. | |||||||||||||
| TgenEquipSecurityAccessControlRadiusUsersTable | 1.3.6.1.4.1.2281.10.11.8.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory Radius privilege table. | |||||||||||||
| RgenEquipSecurityAccessControlRadiusUsersEntry | 1.3.6.1.4.1.2281.10.11.8.2.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Radius privilege table Entry | |||||||||||||
| CgenEquipSecurityAccessControlRadiusUsersId | 1.3.6.1.4.1.2281.10.11.8.2.1.1 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory User ID | |||||||||||||
| CgenEquipSecurityAccessControlRadiusUserInstances | 1.3.6.1.4.1.2281.10.11.8.2.1.2 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory A number of the same connected users. | |||||||||||||
| CgenEquipSecurityAccessControlRadiusUsersAccessChannels | 1.3.6.1.4.1.2281.10.11.8.2.1.3 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory A bits stands for each access channel: serial-0, telnet-1, ssh-2, web-3 | |||||||||||||
| CgenEquipSecurityAccessControlRadiusUsersEthReadLevel | 1.3.6.1.4.1.2281.10.11.8.2.1.4 | RaduisAcceaaLevel | RO | mandatory | |||||||||
column · RaduisAcceaaLevel · read-only · mandatory The RADIUS permitted access for Ethernet Read Level functional group. | |||||||||||||
| CgenEquipSecurityAccessControlRadiusUsersEthWriteLevel | 1.3.6.1.4.1.2281.10.11.8.2.1.5 | RaduisAcceaaLevel | RO | mandatory | |||||||||
column · RaduisAcceaaLevel · read-only · mandatory The RADIUS permitted access for Ethernet Write Level functional group. | |||||||||||||
| CgenEquipSecurityAccessControlRadiusUsersMngReadLevel | 1.3.6.1.4.1.2281.10.11.8.2.1.6 | RaduisAcceaaLevel | RO | mandatory | |||||||||
column · RaduisAcceaaLevel · read-only · mandatory The RADIUS permitted access for MNG Read Level functional group. | |||||||||||||
| CgenEquipSecurityAccessControlRadiusUsersMngWriteLevel | 1.3.6.1.4.1.2281.10.11.8.2.1.7 | RaduisAcceaaLevel | RO | mandatory | |||||||||
column · RaduisAcceaaLevel · read-only · mandatory The RADIUS permitted access for MNG Write Level functional group. | |||||||||||||
| CgenEquipSecurityAccessControlRadiusUsersRadioReadLevel | 1.3.6.1.4.1.2281.10.11.8.2.1.8 | RaduisAcceaaLevel | RO | mandatory | |||||||||
column · RaduisAcceaaLevel · read-only · mandatory The RADIUS permitted access for Radio Read Level functional group. | |||||||||||||
| CgenEquipSecurityAccessControlRadiusUsersRadioWriteLevel | 1.3.6.1.4.1.2281.10.11.8.2.1.9 | RaduisAcceaaLevel | RO | mandatory | |||||||||
column · RaduisAcceaaLevel · read-only · mandatory The RADIUS permitted access for Radio Write Level functional group. | |||||||||||||
| CgenEquipSecurityAccessControlRadiusUsersSecurityReadLevel | 1.3.6.1.4.1.2281.10.11.8.2.1.10 | RaduisAcceaaLevel | RO | mandatory | |||||||||
column · RaduisAcceaaLevel · read-only · mandatory The RADIUS permitted access for Security Read Level functional group. | |||||||||||||
| CgenEquipSecurityAccessControlRadiusUsersSecurityWriteLevel | 1.3.6.1.4.1.2281.10.11.8.2.1.11 | RaduisAcceaaLevel | RO | mandatory | |||||||||
column · RaduisAcceaaLevel · read-only · mandatory The RADIUS permitted access for Security Write Level functional group. | |||||||||||||
| CgenEquipSecurityAccessControlRadiusUsersSyncReadLevel | 1.3.6.1.4.1.2281.10.11.8.2.1.12 | RaduisAcceaaLevel | RO | mandatory | |||||||||
column · RaduisAcceaaLevel · read-only · mandatory The RADIUS permitted access for Sync Read Level functional group. | |||||||||||||
| CgenEquipSecurityAccessControlRadiusUsersSyncWriteLevel | 1.3.6.1.4.1.2281.10.11.8.2.1.13 | RaduisAcceaaLevel | RO | mandatory | |||||||||
column · RaduisAcceaaLevel · read-only · mandatory The RADIUS permitted access for Sync Write Level functional group. | |||||||||||||
| CgenEquipSecurityAccessControlRadiusUsersTdmReadLevel | 1.3.6.1.4.1.2281.10.11.8.2.1.14 | RaduisAcceaaLevel | RO | mandatory | |||||||||
column · RaduisAcceaaLevel · read-only · mandatory The RADIUS permitted access for TDM Read Level functional group. | |||||||||||||
| CgenEquipSecurityAccessControlRadiusUsersTdmWriteLevel | 1.3.6.1.4.1.2281.10.11.8.2.1.15 | RaduisAcceaaLevel | RO | mandatory | |||||||||
column · RaduisAcceaaLevel · read-only · mandatory The RADIUS permitted access for TDM Write Level functional group. | |||||||||||||
| SgenEquipSecurityRadiusAdmin | 1.3.6.1.4.1.2281.10.11.8.10 | EnableDisable | RW | mandatory | |||||||||
scalar · EnableDisable · read-write · mandatory Control working withRadius Server. | |||||||||||||
| NgenEquipSecurityCertificate | 1.3.6.1.4.1.2281.10.11.9 | ||||||||||||
| SgenEquipSecurityCsrCertificateFileTransferSet | 1.3.6.1.4.1.2281.10.11.9.1 | CsrCertificateFTState | RW | mandatory | |||||||||
scalar · CsrCertificateFTState · read-write · mandatory CSR generate and Upload. | |||||||||||||
| SgenEquipSecurityCsrStatus | 1.3.6.1.4.1.2281.10.11.9.2 | FTStatus | RO | mandatory | |||||||||
scalar · FTStatus · read-only · mandatory Status of last geneate and upload. | |||||||||||||
| SgenEquipSecurityCsrCertificateGenerateAndUploadPercentage | 1.3.6.1.4.1.2281.10.11.9.3 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Percentage of last generate CSR and upload. | |||||||||||||
| SgenEquipSecurityCertificateInstallSet | 1.3.6.1.4.1.2281.10.11.9.4 | OffOn | RW | mandatory | |||||||||
scalar · OffOn · read-write · mandatory Certificate Install. | |||||||||||||
| SgenEquipSecurityCertificateDownloadStatus | 1.3.6.1.4.1.2281.10.11.9.5 | FTStatus | RO | mandatory | |||||||||
scalar · FTStatus · read-only · mandatory tatus of last certificate download. | |||||||||||||
| SgenEquipSecurityCertificateDownloadPercentage | 1.3.6.1.4.1.2281.10.11.9.6 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Percentage of certificate download operation. | |||||||||||||
| TgenEquipSecurityCsrAttributesTable | 1.3.6.1.4.1.2281.10.11.9.10 | NA | mandatory | ||||||||||
table · not-accessible · mandatory CSR Attributes Table. | |||||||||||||
| RgenEquipSecurityCsrAttributesEntry | 1.3.6.1.4.1.2281.10.11.9.10.1 | NA | mandatory | ||||||||||
| CgenEquipSecurityCsrAttributesIndex | 1.3.6.1.4.1.2281.10.11.9.10.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Index to table, constant 1 | |||||||||||||
| CgenEquipSecurityCsrAttributesCountry | 1.3.6.1.4.1.2281.10.11.9.10.1.2 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The two-letter ISO abbreviation for your country (ISO3166-1) (example US). | |||||||||||||
| CgenEquipSecurityCsrAttributesLocality | 1.3.6.1.4.1.2281.10.11.9.10.1.3 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The city where your organization is legally located | |||||||||||||
| CgenEquipSecurityCsrAttributesState | 1.3.6.1.4.1.2281.10.11.9.10.1.4 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The state or province where your organization is legally located. Can not be abbreviated. | |||||||||||||
| CgenEquipSecurityCsrAttributesOrganization | 1.3.6.1.4.1.2281.10.11.9.10.1.5 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The exact legal name of your organization. Do not abbreviate your organization name. | |||||||||||||
| CgenEquipSecurityCsrAttributesOu | 1.3.6.1.4.1.2281.10.11.9.10.1.6 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory Section of the organization. Example: Marketing. | |||||||||||||
| CgenEquipSecurityCsrAttributesCommonName | 1.3.6.1.4.1.2281.10.11.9.10.1.7 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The fully qualified domain name for your web server. This must be an exact match. | |||||||||||||
| CgenEquipSecurityCsrAttributesEmail | 1.3.6.1.4.1.2281.10.11.9.10.1.8 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory An email address used to contact your organization. | |||||||||||||
| CgenEquipSecurityCsrAttributesFileFormat | 1.3.6.1.4.1.2281.10.11.9.10.1.9 | CsrFileFormat | RO | mandatory | |||||||||
column · CsrFileFormat · read-only · mandatory CSR file format. PEM or DER. | |||||||||||||
| TgenEquipSecurityCsrUploadConfigTable | 1.3.6.1.4.1.2281.10.11.9.11 | NA | mandatory | ||||||||||
table · not-accessible · mandatory CSR (Certificate Request) Upload Configuration Table. | |||||||||||||
| RgenEquipSecurityCsrUploadConfigEntry | 1.3.6.1.4.1.2281.10.11.9.11.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory CSR (Certificate Request) Upload Configuration Table Entry | |||||||||||||
| CgenEquipSecurityCsrUploadConfigIndex | 1.3.6.1.4.1.2281.10.11.9.11.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory CSR upload Configuration index. has Fixed value of 1 | |||||||||||||
| CgenEquipSecurityCsrUploadConfigIpv4Address | 1.3.6.1.4.1.2281.10.11.9.11.1.2 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory IPv4 address of the server, where the file are to be transferred to/from. | |||||||||||||
| CgenEquipSecurityCsrUploadConfigIpV6Address | 1.3.6.1.4.1.2281.10.11.9.11.1.3 | OCTET STRING (SIZE (0..16)) | RW | mandatory | |||||||||
column · OCTET STRING (SIZE (0..16)) · read-write · mandatory IPv6 address of the server, where the file are to be transferred to/from | |||||||||||||
| CgenEquipSecurityCsrUploadConfigTableUsername | 1.3.6.1.4.1.2281.10.11.9.11.1.4 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory User name for accesssing files in the server (User credentials to access server). | |||||||||||||
| CgenEquipSecurityCsrUploadConfigPassword | 1.3.6.1.4.1.2281.10.11.9.11.1.5 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory Password (User credentials to access server). | |||||||||||||
| CgenEquipSecurityCsrUploadConfigPath | 1.3.6.1.4.1.2281.10.11.9.11.1.6 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory Location of file in the server (folder). | |||||||||||||
| CgenEquipSecurityCsrUploadConfigFilename | 1.3.6.1.4.1.2281.10.11.9.11.1.7 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Filename in the server, where the file are to be transferred to/from. | |||||||||||||
| TgenEquipSecurityCertificateDownloadConfigTable | 1.3.6.1.4.1.2281.10.11.9.12 | NA | mandatory | ||||||||||
table · not-accessible · mandatory CSR (Certificate Request) Download Configuration Table. | |||||||||||||
| RgenEquipSecurityCertificateDownloadConfigEntry | 1.3.6.1.4.1.2281.10.11.9.12.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory CSR (Certificate Request) Download Configuration Table Entry | |||||||||||||
| CgenEquipSecurityCertificateDownloadConfigIndex | 1.3.6.1.4.1.2281.10.11.9.12.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Certificate download configuration index. has Fixed value of 1 | |||||||||||||
| CgenEquipSecurityCertificateDownloadConfigIpv4Address | 1.3.6.1.4.1.2281.10.11.9.12.1.2 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory IPv4 address of the server, where the file are to be transferred to/from. | |||||||||||||
| CgenEquipSecurityCertificateDownloadConfigIpV6Address | 1.3.6.1.4.1.2281.10.11.9.12.1.3 | OCTET STRING (SIZE (0..16)) | RW | mandatory | |||||||||
column · OCTET STRING (SIZE (0..16)) · read-write · mandatory IPv6 address of the server, where the file are to be transferred to/from | |||||||||||||
| CgenEquipSecurityCertificateDownloadConfigUsername | 1.3.6.1.4.1.2281.10.11.9.12.1.4 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory User name for accesssing files in the server (User credentials to access server). | |||||||||||||
| CgenEquipSecurityCertificateDownloadConfigPassword | 1.3.6.1.4.1.2281.10.11.9.12.1.5 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory Password (User credentials to access server). | |||||||||||||
| CgenEquipSecurityCertificateDownloadConfigPath | 1.3.6.1.4.1.2281.10.11.9.12.1.6 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory Location of file in the server (folder). | |||||||||||||
| CgenEquipSecurityCertificateDownloadConfigFilename | 1.3.6.1.4.1.2281.10.11.9.12.1.7 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Filename in the server, where the file are to be transferred to/from. | |||||||||||||
| NgenEquipSecurityTrafficCrypto | 1.3.6.1.4.1.2281.10.11.10 | ||||||||||||
| SgenEquipSecurityFipsAdmin | 1.3.6.1.4.1.2281.10.11.10.1 | EnableDisable | RW | mandatory | |||||||||
scalar · EnableDisable · read-write · mandatory FIPS admin configuration parameter | |||||||||||||
| SgenEquipSecurityFipsStatus | 1.3.6.1.4.1.2281.10.11.10.2 | DownUp | RO | mandatory | |||||||||
scalar · DownUp · read-only · mandatory FIPS operational status. | |||||||||||||
| TgenEquipTrafficCryptoConfigTable | 1.3.6.1.4.1.2281.10.11.10.10 | NA | mandatory | ||||||||||
table · not-accessible · mandatory Traffic Crypto configuration table. | |||||||||||||
| RgenEquipTrafficCryptoConfigEntry | 1.3.6.1.4.1.2281.10.11.10.10.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Traffic Crypto configuration table entry | |||||||||||||
| CgenEquipTrafficCryptoConfigId | 1.3.6.1.4.1.2281.10.11.10.10.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Traffic crypto Configuration Intreface ID | |||||||||||||
| CgenEquipTrafficCryptoConfigConfigAdmin | 1.3.6.1.4.1.2281.10.11.10.10.1.2 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Traffic Crypto Admin Mode.
| |||||||||||||
| CgenEquipTrafficCryptoConfigMkey | 1.3.6.1.4.1.2281.10.11.10.10.1.3 | OCTET STRING | RW | mandatory | |||||||||
column · OCTET STRING · read-write · mandatory Traffic Crypto Master Key. | |||||||||||||
| CgenEquipTrafficCryptoConfigBackupMkey | 1.3.6.1.4.1.2281.10.11.10.10.1.4 | OCTET STRING | RW | mandatory | |||||||||
column · OCTET STRING · read-write · mandatory Traffic Crypto Backup Master Key | |||||||||||||
| CgenEquipTrafficCryptoConfigMkeyPeriod | 1.3.6.1.4.1.2281.10.11.10.10.1.5 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Master Key Expire Configuration. | |||||||||||||
| CgenEquipTrafficCryptoConfigRandKeyGen | 1.3.6.1.4.1.2281.10.11.10.10.1.6 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Random Key generation/clear indication.
| |||||||||||||
| CgenEquipTrafficCryptoConfigSkeyPeriod | 1.3.6.1.4.1.2281.10.11.10.10.1.7 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Session Key Update Time Configuration. | |||||||||||||
| TgenEquipTrafficCryptoStatusTable | 1.3.6.1.4.1.2281.10.11.10.11 | NA | mandatory | ||||||||||
table · not-accessible · mandatory Traffic Crypto status table. | |||||||||||||
| RgenEquipTrafficCryptoStatusEntry | 1.3.6.1.4.1.2281.10.11.10.11.1 | NA | mandatory | ||||||||||
| CgenEquipTrafficCryptoStatusId | 1.3.6.1.4.1.2281.10.11.10.11.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Traffic Crypto Status Intreface ID | |||||||||||||
| CgenEquipTrafficCryptoStatusValid | 1.3.6.1.4.1.2281.10.11.10.11.1.2 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Crypto Interface Validation State.
| |||||||||||||
| CgenEquipTrafficCryptoStatusMkeyTimeExpire | 1.3.6.1.4.1.2281.10.11.10.11.1.3 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Number of days Mkey to expire. | |||||||||||||