SPC200
SPIDCOM Technologies SADescription
snmptranslate -m SPC200 -Tpsnmpwalk -v2c -c <community> -m SPC200 <host> 1.3.6.1.4.1.22764.1Imports
| IF-MIB | ifIndex, interfaces |
|---|---|
| SNMPv2-CONF | AGENT-CAPABILITIES, MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| SPIDCOM-MIB | spidcom |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ispc200MIB | 1.3.6.1.4.1.22764.1 | |||
identity Description | ||||
| Nplc | 1.3.6.1.4.1.22764.1.1 | |||
| Nstats | 1.3.6.1.4.1.22764.1.1.1 | |||
| TportStatsTable | 1.3.6.1.4.1.22764.1.1.1.2 | NA | ||
table · not-accessible · current This table gathers all statistic data specific to SPC200 chip relative to plc connection. | ||||
| RportStatsEntry | 1.3.6.1.4.1.22764.1.1.1.2.1 | NA | ||
row · not-accessible · current This row contains statistic data specific to SPC200 chip relative to a connection. | ||||
| CportStatsBandIndex | 1.3.6.1.4.1.22764.1.1.1.2.1.1 | BandValue | NA | |
column · BandValue · not-accessible · current The band number on which the signal, noise, ber data are collected. | ||||
| CportStatsGroupIndex | 1.3.6.1.4.1.22764.1.1.1.2.1.2 | GroupValue | NA | |
column · GroupValue · not-accessible · current The group number on which the signal, noise, ber data are collected | ||||
| CportStatsCarrierIndex | 1.3.6.1.4.1.22764.1.1.1.2.1.3 | CarrierValue | NA | |
column · CarrierValue · not-accessible · current The group number on which the signal, noise, ber data are collected | ||||
| CportStatsSignal | 1.3.6.1.4.1.22764.1.1.1.2.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The DB value of the signal associated with the carrier wave entry. | ||||
| CportStatsNoise | 1.3.6.1.4.1.22764.1.1.1.2.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The DB value of the noise associated with the carrier wave entry. | ||||
| TportStats2Table | 1.3.6.1.4.1.22764.1.1.1.3 | NA | ||
table · not-accessible · current This table gathers all statistic data specific to SPC200 chip relative to plc channels. This table has the same information as the portChannelStatsTable but in a more compact way. This table has been added to deal with possible slow performances. | ||||
| RportStats2Entry | 1.3.6.1.4.1.22764.1.1.1.3.1 | NA | ||
row · not-accessible · current This row contains statistic data specific to SPC200 chip relative to a connection. | ||||
| CportStats2Signal | 1.3.6.1.4.1.22764.1.1.1.3.1.1 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The values of the signal for all the carrier waves. The expected format is VALUE VALUE VALUE ... VALUE. Each value is coded on two bytes. There is one value for each 128 carriers of the considered band. | ||||
| CportStats2Noise | 1.3.6.1.4.1.22764.1.1.1.3.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The values of the noise for all the carrier waves. The expected format is VALUE VALUE VALUE ... VALUE. Each value is coded on two bytes. There is one value for each 128 carriers of the considered band. | ||||
| CportStats2AvgBandAtt | 1.3.6.1.4.1.22764.1.1.1.3.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current Average attenuation per band (dB). | ||||
| CportStats2AvgBandSNR | 1.3.6.1.4.1.22764.1.1.1.3.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current Average SNR per band (dB). | ||||
| TportStats3Table | 1.3.6.1.4.1.22764.1.1.1.4 | NA | ||
table · not-accessible · current This table gathers all statistic data specific to SPC200 chip relative to plc channels. This table has the same information as the portChannelStatsTable but in a more compact way. This table has been added to deal with possible slow performances. | ||||
| RportStats3Entry | 1.3.6.1.4.1.22764.1.1.1.4.1 | NA | ||
row · not-accessible · current This row contains statistic data specific to SPC200 chip relative to a connection.
| ||||
| CportStats3AvgAtt | 1.3.6.1.4.1.22764.1.1.1.4.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current Average attenuation on the link (dB). | ||||
| CportStats3AvgSNR | 1.3.6.1.4.1.22764.1.1.1.4.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current Average SNR on the link (dB). | ||||
| Nbootstats | 1.3.6.1.4.1.22764.1.1.1.5 | |||
node · current boot statistics | ||||
| SbootstatsBoot | 1.3.6.1.4.1.22764.1.1.1.5.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current Boot | ||||
| SbootstatsManualReset | 1.3.6.1.4.1.22764.1.1.1.5.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current Manual reset | ||||
| SbootstatsFailureReset | 1.3.6.1.4.1.22764.1.1.1.5.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current Failure reset | ||||
| NplcObjects | 1.3.6.1.4.1.22764.1.1.2 | |||
| SplcMode | 1.3.6.1.4.1.22764.1.1.2.1 | PlcModeType | RW | |
scalar · PlcModeType · read-write · current Plc Mode | ||||
| NplcTopo | 1.3.6.1.4.1.22764.1.1.2.2 | |||
| SplcTopoChanges | 1.3.6.1.4.1.22764.1.1.2.2.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of topology changes detected by this plc bridge since the management entity was last reset or initialized. Such changes concerns only - the plcBasePortTable rows - the plcBasePortTable columns except for plcBasePortChannelEstimation | ||||
| TplcBasePortTable | 1.3.6.1.4.1.22764.1.1.2.2.2 | NA | ||
table · not-accessible · current This table contains the list of plc remote connection | ||||
| RplcBasePortEntry | 1.3.6.1.4.1.22764.1.1.2.2.2.1 | NA | ||
row · not-accessible · current This row contains plc remote connection information
| ||||
| CplcBasePortIndex | 1.3.6.1.4.1.22764.1.1.2.2.2.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current The MAC address of the MAC layer above the plc interface of the remote PLC equipment. | ||||
| CplcBasePortAddress | 1.3.6.1.4.1.22764.1.1.2.2.2.1.2 | MacAddress | RO | |
column · MacAddress · read-only · current The MAC address of the MAC layer above the plc interface of the remote PLC equipment. | ||||
| CplcBasePortChannelEstimation | 1.3.6.1.4.1.22764.1.1.2.2.2.1.3 | EstimationMode | RW | |
column · EstimationMode · read-write · current Enable or disable the automatic channel estimation processus. | ||||
| CplcBasePortAttenuation | 1.3.6.1.4.1.22764.1.1.2.2.2.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current Link attenuation (dB). | ||||
| TplcChannelModulationStringTable | 1.3.6.1.4.1.22764.1.1.2.2.3 | NA | ||
table · not-accessible · current This table contains string values for a quick access to the modulation amplitude configurations of all active channels. | ||||
| RplcChannelModulationStringEntry | 1.3.6.1.4.1.22764.1.1.2.2.3.1 | NA | ||
row · not-accessible · current This row contains string values for a quick access to the modulation amplitude configuration of each active channel of the remote connection referenced by plcBasePortIndex.
| ||||
| CplcRxChannelModulation | 1.3.6.1.4.1.22764.1.1.2.2.3.1.1 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The modulation amplitude values for the Rx channel of a given remote connection entry. The expected format is VALUE VALUE VALUE ... VALUE. Each value is an octet representing two modulation values. Each modulation is coded on 4 bits. There are ( 16 groups * 7 bands ) / 2 = 66 values. | ||||
| CplcRxLastChannelModulation | 1.3.6.1.4.1.22764.1.1.2.2.3.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The modulation amplitude values for the Rx Last channel of a given remote connection entry. The expected format is VALUE VALUE VALUE ... VALUE. Each value is an octet representing two modulation values. Each modulation is coded on 4 bits representing ModulationValue - 1. There are ( 16 groups * 7 bands ) / 2 = 66 values. | ||||
| CplcTxChannelModulation | 1.3.6.1.4.1.22764.1.1.2.2.3.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The modulation amplitude values for the Tx channel of a given remote connection entry. The expected format is VALUE VALUE VALUE ... VALUE. Each value is an octet representing two modulation values. Each modulation is coded on 4 bits. There are ( 16 groups * 7 bands ) / 2 = 66 values. | ||||
| TplcChannelModulationTable | 1.3.6.1.4.1.22764.1.1.2.2.4 | NA | ||
table · not-accessible · current This table contains the modulation amplitude configuration of all active channels. | ||||
| RplcChannelModulationEntry | 1.3.6.1.4.1.22764.1.1.2.2.4.1 | NA | ||
row · not-accessible · current This row contains modulation amplitude configuration of the channel, referenced by the plcPortChannelIndex, of the remote connection referenced by plcBasePortIndex. | ||||
| CplcModBandIndex | 1.3.6.1.4.1.22764.1.1.2.2.4.1.1 | BandValue | NA | |
column · BandValue · not-accessible · current The band number of which the modulations are defined | ||||
| CplcModGroup1 | 1.3.6.1.4.1.22764.1.1.2.2.4.1.2 | ModulationValue | RO | |
column · ModulationValue · read-only · current The modulation amplitude of the first group of the band entry of the channel entry for a given remote connection entry. | ||||
| CplcModGroup2 | 1.3.6.1.4.1.22764.1.1.2.2.4.1.3 | ModulationValue | RO | |
column · ModulationValue · read-only · current The modulation amplitude of the second group of the band entry of the channel entry for a given remote connection entry. | ||||
| CplcModGroup3 | 1.3.6.1.4.1.22764.1.1.2.2.4.1.4 | ModulationValue | RO | |
column · ModulationValue · read-only · current The modulation amplitude of the third group of the band entry of the channel entry for a given remote connection entry. | ||||
| CplcModGroup4 | 1.3.6.1.4.1.22764.1.1.2.2.4.1.5 | ModulationValue | RO | |
column · ModulationValue · read-only · current The modulation amplitude of the fourth group of the band entry of the channel entry for a given remote connection entry. | ||||
| CplcModGroup5 | 1.3.6.1.4.1.22764.1.1.2.2.4.1.6 | ModulationValue | RO | |
column · ModulationValue · read-only · current The modulation amplitude of the fifth group of the band entry of the channel entry for a given remote connection entry. | ||||
| CplcModGroup6 | 1.3.6.1.4.1.22764.1.1.2.2.4.1.7 | ModulationValue | RO | |
column · ModulationValue · read-only · current The modulation amplitude of the sixth group of the band entry of the channel entry for a given remote connection entry. | ||||
| CplcModGroup7 | 1.3.6.1.4.1.22764.1.1.2.2.4.1.8 | ModulationValue | RO | |
column · ModulationValue · read-only · current The modulation amplitude of the seventh group of the band entry of the channel entry for a given remote connection entry. | ||||
| CplcModGroup8 | 1.3.6.1.4.1.22764.1.1.2.2.4.1.9 | ModulationValue | RO | |
column · ModulationValue · read-only · current The modulation amplitude of the eighth group of the band entry of the channel entry for a given remote connection entry. | ||||
| CplcModGroup9 | 1.3.6.1.4.1.22764.1.1.2.2.4.1.10 | ModulationValue | RO | |
column · ModulationValue · read-only · current The modulation amplitude of the nineth group of the band entry of the channel entry for a given remote connection entry. | ||||
| CplcModGroup10 | 1.3.6.1.4.1.22764.1.1.2.2.4.1.11 | ModulationValue | RO | |
column · ModulationValue · read-only · current The modulation amplitude of the tenth group of the band entry of the channel entry for a given remote connection entry. | ||||
| CplcModGroup11 | 1.3.6.1.4.1.22764.1.1.2.2.4.1.12 | ModulationValue | RO | |
column · ModulationValue · read-only · current The modulation amplitude of the eleventh group of the band entry of the channel entry for a given remote connection entry. | ||||
| CplcModGroup12 | 1.3.6.1.4.1.22764.1.1.2.2.4.1.13 | ModulationValue | RO | |
column · ModulationValue · read-only · current The modulation amplitude of the twelveth group of the band entry of the channel entry for a given remote connection entry. | ||||
| CplcModGroup13 | 1.3.6.1.4.1.22764.1.1.2.2.4.1.14 | ModulationValue | RO | |
column · ModulationValue · read-only · current The modulation amplitude of the thirteenth group of the band entry of the channel entry for a given remote connection entry. | ||||
| CplcModGroup14 | 1.3.6.1.4.1.22764.1.1.2.2.4.1.15 | ModulationValue | RO | |
column · ModulationValue · read-only · current The modulation amplitude of the fourteenth group of the band entry of the channel entry for a given remote connection entry. | ||||
| CplcModGroup15 | 1.3.6.1.4.1.22764.1.1.2.2.4.1.16 | ModulationValue | RO | |
column · ModulationValue · read-only · current The modulation amplitude of the fifteenth group of the band entry of the channel entry for a given remote connection entry. | ||||
| CplcModGroup16 | 1.3.6.1.4.1.22764.1.1.2.2.4.1.17 | ModulationValue | RO | |
column · ModulationValue · read-only · current The modulation amplitude of the sixteenth group of the band entry of the channel entry for a given remote connection entry. | ||||
| NplcChannelModulationInput | 1.3.6.1.4.1.22764.1.1.2.2.5 | |||
| SplcModulationInputAddr | 1.3.6.1.4.1.22764.1.1.2.2.5.1 | MacAddress | RW | |
scalar · MacAddress · read-write · current The MAC address of the MAC layer above the plc interface of the remote PLC equipment for which the modulation value changes are requested. | ||||
| SplcModulationInputChannel | 1.3.6.1.4.1.22764.1.1.2.2.5.2 | PlcChannelType | RW | |
scalar · PlcChannelType · read-write · current The channel type of the remote PLC equipment for which the modulation value changes are requested. | ||||
| SplcModulationInputBand | 1.3.6.1.4.1.22764.1.1.2.2.5.3 | BandValue | RW | |
scalar · BandValue · read-write · current The band number of which the modulation value changes are requested. | ||||
| SplcInputModulationGroup1 | 1.3.6.1.4.1.22764.1.1.2.2.5.4 | ModulationValue | RW | |
scalar · ModulationValue · read-write · current The new requested modulation amplitude of the first group of the considered band and channel input values. | ||||
| SplcInputModulationGroup2 | 1.3.6.1.4.1.22764.1.1.2.2.5.5 | ModulationValue | RW | |
scalar · ModulationValue · read-write · current The new requested modulation amplitude of the second group of the considered band and channel input values. | ||||
| SplcInputModulationGroup3 | 1.3.6.1.4.1.22764.1.1.2.2.5.6 | ModulationValue | RW | |
scalar · ModulationValue · read-write · current The new requested modulation amplitude of the third group of the considered band and channel input values. | ||||
| SplcInputModulationGroup4 | 1.3.6.1.4.1.22764.1.1.2.2.5.7 | ModulationValue | RW | |
scalar · ModulationValue · read-write · current The new requested modulation amplitude of the fourth group of the considered band and channel input values. | ||||
| SplcInputModulationGroup5 | 1.3.6.1.4.1.22764.1.1.2.2.5.8 | ModulationValue | RW | |
scalar · ModulationValue · read-write · current The new requested modulation amplitude of the fifth group of the considered band and channel input values. | ||||
| SplcInputModulationGroup6 | 1.3.6.1.4.1.22764.1.1.2.2.5.9 | ModulationValue | RW | |
scalar · ModulationValue · read-write · current The new requested modulation amplitude of the sixth group of the considered band and channel input values. | ||||
| SplcInputModulationGroup7 | 1.3.6.1.4.1.22764.1.1.2.2.5.10 | ModulationValue | RW | |
scalar · ModulationValue · read-write · current The new requested modulation amplitude of the seventh group of the considered band and channel input values. | ||||
| SplcInputModulationGroup8 | 1.3.6.1.4.1.22764.1.1.2.2.5.11 | ModulationValue | RW | |
scalar · ModulationValue · read-write · current The new requested modulation amplitude of the eighth group of the considered band and channel input values. | ||||
| SplcInputModulationGroup9 | 1.3.6.1.4.1.22764.1.1.2.2.5.12 | ModulationValue | RW | |
scalar · ModulationValue · read-write · current The new requested modulation amplitude of the nineth group of the considered band and channel input values. | ||||
| SplcInputModulationGroup10 | 1.3.6.1.4.1.22764.1.1.2.2.5.13 | ModulationValue | RW | |
scalar · ModulationValue · read-write · current The new requested modulation amplitude of the tenth group of the considered band and channel input values. | ||||
| SplcInputModulationGroup11 | 1.3.6.1.4.1.22764.1.1.2.2.5.14 | ModulationValue | RW | |
scalar · ModulationValue · read-write · current The new requested modulation amplitude of the eleventh group of the considered band and channel input values. | ||||
| SplcInputModulationGroup12 | 1.3.6.1.4.1.22764.1.1.2.2.5.15 | ModulationValue | RW | |
scalar · ModulationValue · read-write · current The new requested modulation amplitude of the twelveth group of the considered band and channel input values. | ||||
| SplcInputModulationGroup13 | 1.3.6.1.4.1.22764.1.1.2.2.5.16 | ModulationValue | RW | |
scalar · ModulationValue · read-write · current The new requested modulation amplitude of the thirteenth group of the considered band and channel input values. | ||||
| SplcInputModulationGroup14 | 1.3.6.1.4.1.22764.1.1.2.2.5.17 | ModulationValue | RW | |
scalar · ModulationValue · read-write · current The new requested modulation amplitude of the fourteenth group of the considered band and channel input values. | ||||
| SplcInputModulationGroup15 | 1.3.6.1.4.1.22764.1.1.2.2.5.18 | ModulationValue | RW | |
scalar · ModulationValue · read-write · current The new requested modulation amplitude of the fifteenth group of the considered band and channel input values. | ||||
| SplcInputModulationGroup16 | 1.3.6.1.4.1.22764.1.1.2.2.5.19 | ModulationValue | RW | |
scalar · ModulationValue · read-write · current The new requested modulation amplitude of the sixteenth group of the considered band and channel input values. | ||||
| SplcModulationInputProceed | 1.3.6.1.4.1.22764.1.1.2.2.5.20 | TruthValue | RW | |
scalar · TruthValue · read-write · current True to request a modification of all the modulations associated to a band and a channel of a remote PLC equipment. | ||||
| SplcModulationInputResult | 1.3.6.1.4.1.22764.1.1.2.2.5.21 | ResultValue | RO | |
scalar · ResultValue · read-only · current Result value of the requested modulation value changes. | ||||
| TplcPortChannelTable | 1.3.6.1.4.1.22764.1.1.2.2.6 | NA | ||
table · not-accessible · current This table contains the list of plc channels | ||||
| RplcPortChannelEntry | 1.3.6.1.4.1.22764.1.1.2.2.6.1 | NA | ||
row · not-accessible · current This row contains plc channel information | ||||
| CplcPortChannelIndex | 1.3.6.1.4.1.22764.1.1.2.2.6.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The channel number belongs to the remote connection with plc equipment associated with the plcBasePortIndex value. Only three channels are expected. Index 1 for RX channel Index 2 for RXLast channel index 3 for TX channel | ||||
| CplcPortChannelType | 1.3.6.1.4.1.22764.1.1.2.2.6.1.2 | PlcChannelType | RO | |
column · PlcChannelType · read-only · current The channel type. | ||||
| CplcPortChannelGain | 1.3.6.1.4.1.22764.1.1.2.2.6.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current The gain associated with the channel. | ||||
| CplcPortChannelBandwidth | 1.3.6.1.4.1.22764.1.1.2.2.6.1.4 | ChannelBandwidthValue | RO | |
column · ChannelBandwidthValue · read-only · current The bandwidth of the channel in Kbit/s. | ||||
| CplcPortChannelMaxBandwidth | 1.3.6.1.4.1.22764.1.1.2.2.6.1.5 | ChannelBandwidthValue | RO | |
column · ChannelBandwidthValue · read-only · current The maximum bandwidth of the channel in Kbit/s. | ||||
| CplcPortChannelSynchronizationBand | 1.3.6.1.4.1.22764.1.1.2.2.6.1.6 | BandValue | RO | |
column · BandValue · read-only · current The synchronization band used for this channel. | ||||
| TplcChannelPilotStringTable | 1.3.6.1.4.1.22764.1.1.2.2.7 | NA | ||
table · not-accessible · current This table contains the string values representing of pilot values of all active channels. | ||||
| RplcChannelPilotStringEntry | 1.3.6.1.4.1.22764.1.1.2.2.7.1 | NA | ||
row · not-accessible · current This row contains a quick access for pilot values , of the remote connection referenced by plcBasePortIndex.
| ||||
| CplcRxChannelPilots | 1.3.6.1.4.1.22764.1.1.2.2.7.1.1 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The carrier wave numbers which support the pilot waves for the Rx Channel. The expected format is VALUE VALUE VALUE ... VALUE. Each value is a pair of octets representing the pilot values. There is one pair (pilot1 pilot2) for each of the 7 bands. | ||||
| CplcRxLastChannelPilots | 1.3.6.1.4.1.22764.1.1.2.2.7.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The carrier wave numbers which support the pilot waves for the Rx Last Channel. The expected format is VALUE VALUE VALUE ... VALUE. Each value is a pair of octets representing the pilot values. There is one pair (pilot1 pilot2) for each of the 7 bands. | ||||
| CplcTxChannelPilots | 1.3.6.1.4.1.22764.1.1.2.2.7.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The carrier wave numbers which support the pilot waves for the Tx Channel. The expected format is VALUE VALUE VALUE ... VALUE. Each value is a pair of octets representing the pilot values. There is one pair (pilot1 pilot2) for each of the 7 bands. | ||||
| TplcChannelPilotsTable | 1.3.6.1.4.1.22764.1.1.2.2.8 | NA | ||
table · not-accessible · current This tabel contains pilots configuration for each plc channel. | ||||
| RplcChannelPilotsEntry | 1.3.6.1.4.1.22764.1.1.2.2.8.1 | NA | ||
row · not-accessible · current This row contains the pilots 1 and 2 configuration for a channel defined by the couple (plcBasePortIndex, plcPortChannelIndex) | ||||
| CplcChannelPilotBandIndex | 1.3.6.1.4.1.22764.1.1.2.2.8.1.1 | BandValue | NA | |
column · BandValue · not-accessible · current The band number on which the pilots are defined. | ||||
| CplcChannelPilot1 | 1.3.6.1.4.1.22764.1.1.2.2.8.1.2 | PilotValue | RO | |
column · PilotValue · read-only · current The carrier wave number which supports the first pilot wave for the channel associated with this entry. | ||||
| CplcChannePilot2 | 1.3.6.1.4.1.22764.1.1.2.2.8.1.3 | PilotValue | RO | |
column · PilotValue · read-only · current The carrier wave number which supports the second pilot wave for the channel associated with this entry. | ||||
| NplcChannelPilotsInput | 1.3.6.1.4.1.22764.1.1.2.2.9 | |||
| SplcPilotsInputAddr | 1.3.6.1.4.1.22764.1.1.2.2.9.1 | MacAddress | RW | |
scalar · MacAddress · read-write · current The MAC address of the MAC layer above the plc interface of the remote PLC equipment for which the pilot value changes are requested. | ||||
| SplcPilotsInputChannel | 1.3.6.1.4.1.22764.1.1.2.2.9.2 | PlcChannelType | RW | |
scalar · PlcChannelType · read-write · current The channel type of the remote PLC equipment for which the pilot value changes are requested. | ||||
| SplcPilotsInputBand | 1.3.6.1.4.1.22764.1.1.2.2.9.3 | BandValue | RW | |
scalar · BandValue · read-write · current The band number of which the pilots value changes are requested. | ||||
| SplcInputChannelPilot1 | 1.3.6.1.4.1.22764.1.1.2.2.9.4 | PilotValue | RW | |
scalar · PilotValue · read-write · current The carrier wave number which supports the first pilot wave for the considered band and channel input values. | ||||
| SplcInputChannelPilot2 | 1.3.6.1.4.1.22764.1.1.2.2.9.5 | PilotValue | RW | |
scalar · PilotValue · read-write · current The carrier wave number which supports the second pilot wave for the considered band and channel input values. | ||||
| SplcPilotsInputProceed | 1.3.6.1.4.1.22764.1.1.2.2.9.6 | TruthValue | RW | |
scalar · TruthValue · read-write · current True to request a modification of the first and second pilot associated to a band and a channel of a remote PLC equipment. | ||||
| SplcPilotsInputResult | 1.3.6.1.4.1.22764.1.1.2.2.9.7 | ResultValue | RO | |
scalar · ResultValue · read-only · current Result value of the requested pilot values changes. | ||||
| NplcNodeConfiguration | 1.3.6.1.4.1.22764.1.1.2.3 | |||
| SplcNodeNotches | 1.3.6.1.4.1.22764.1.1.2.3.1 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The values of the notches for all the node bands. The expected format is VALUE VALUE VALUE ... VALUE. Each value is an octet representing the 8 notches of each group. There is one value for each 7 * 16 bands. | ||||
| TplcNodeNotchesTable | 1.3.6.1.4.1.22764.1.1.2.3.2 | NA | ||
table · not-accessible · current This table contains Notches configuration for the SPC200 chip. | ||||
| RplcNodeNotchesEntry | 1.3.6.1.4.1.22764.1.1.2.3.2.1 | NA | ||
row · not-accessible · current This row contains Notches configuration for a group. The group is defined by the couple (plcNodeNotchesGroupIndex, plcNodeNotchesBandIndex). | ||||
| CplcNodeNotchesBandIndex | 1.3.6.1.4.1.22764.1.1.2.3.2.1.1 | BandValue | NA | |
column · BandValue · not-accessible · current The band number on which the notches are defined. | ||||
| CplcNodeNotchesGroupIndex | 1.3.6.1.4.1.22764.1.1.2.3.2.1.2 | GroupValue | NA | |
column · GroupValue · not-accessible · current The group number on which the notches are defined. | ||||
| CplcNodeNotchesCarrier1 | 1.3.6.1.4.1.22764.1.1.2.3.2.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current Tell if the first carrier of the group entry of the band entry is a notch carrier. The true value means the current carrier is a notch. | ||||
| CplcNodeNotchesCarrier2 | 1.3.6.1.4.1.22764.1.1.2.3.2.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current Tell if the second carrier of the group entry of the band entry is a notch carrier. The true value means the current carrier is a notch. | ||||
| CplcNodeNotchesCarrier3 | 1.3.6.1.4.1.22764.1.1.2.3.2.1.5 | TruthValue | RO | |
column · TruthValue · read-only · current Tell if the third carrier of the group entry of the band entry is a notch carrier. The true value means the current carrier is a notch. | ||||
| CplcNodeNotchesCarrier4 | 1.3.6.1.4.1.22764.1.1.2.3.2.1.6 | TruthValue | RO | |
column · TruthValue · read-only · current Tell if the fourth carrier of the group entry of the band entry is a notch carrier. The true value means the current carrier is a notch. | ||||
| CplcNodeNotchesCarrier5 | 1.3.6.1.4.1.22764.1.1.2.3.2.1.7 | TruthValue | RO | |
column · TruthValue · read-only · current Tell if the fifth carrier of the group entry of the band entry is a notch carrier. The true value means the current carrier is a notch. | ||||
| CplcNodeNotchesCarrier6 | 1.3.6.1.4.1.22764.1.1.2.3.2.1.8 | TruthValue | RO | |
column · TruthValue · read-only · current Tell if the sixth carrier of the group entry of the band entry is a notch carrier. The true value means the current carrier is a notch. | ||||
| CplcNodeNotchesCarrier7 | 1.3.6.1.4.1.22764.1.1.2.3.2.1.9 | TruthValue | RO | |
column · TruthValue · read-only · current Tell if the seventh carrier of the group entry of the band entry is a notch carrier. The true value means the current carrier is a notch. | ||||
| CplcNodeNotchesCarrier8 | 1.3.6.1.4.1.22764.1.1.2.3.2.1.10 | TruthValue | RO | |
column · TruthValue · read-only · current Tell if the eighth carrier of the group entry of the band entry is a notch carrier. The true value means the current carrier is a notch. | ||||
| NplcNodeNotchesInput | 1.3.6.1.4.1.22764.1.1.2.3.3 | |||
| SplcNodeNotchesInputBand | 1.3.6.1.4.1.22764.1.1.2.3.3.1 | BandValue | RW | |
scalar · BandValue · read-write · current The band number on which the notches value changes are requested. | ||||
| SplcNodeNotchesInputGroup | 1.3.6.1.4.1.22764.1.1.2.3.3.2 | GroupValue | RW | |
scalar · GroupValue · read-write · current The group number on which the notches value changes are requested. | ||||
| SplcNodeNotchesInputCarrier1 | 1.3.6.1.4.1.22764.1.1.2.3.3.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current The first carrier of the considered group and band is a notch carrier. The true value means the current carrier is a notch. | ||||
| SplcNodeNotchesInputCarrier2 | 1.3.6.1.4.1.22764.1.1.2.3.3.4 | TruthValue | RW | |
scalar · TruthValue · read-write · current The second carrier of the considered group and band is a notch carrier. The true value means the current carrier is a notch. | ||||
| SplcNodeNotchesInputCarrier3 | 1.3.6.1.4.1.22764.1.1.2.3.3.5 | TruthValue | RW | |
scalar · TruthValue · read-write · current The third carrier of the considered group and band is a notch carrier. The true value means the current carrier is a notch. | ||||
| SplcNodeNotchesInputCarrier4 | 1.3.6.1.4.1.22764.1.1.2.3.3.6 | TruthValue | RW | |
scalar · TruthValue · read-write · current The fourth carrier of the considered group and band is a notch carrier. The true value means the current carrier is a notch. | ||||
| SplcNodeNotchesInputCarrier5 | 1.3.6.1.4.1.22764.1.1.2.3.3.7 | TruthValue | RW | |
scalar · TruthValue · read-write · current The eighth carrier of the considered group and band is a notch carrier. The true value means the current carrier is a notch. | ||||
| SplcNodeNotchesInputCarrier6 | 1.3.6.1.4.1.22764.1.1.2.3.3.8 | TruthValue | RW | |
scalar · TruthValue · read-write · current The eighth carrier of the considered group and band is a notch carrier. The true value means the current carrier is a notch. | ||||
| SplcNodeNotchesInputCarrier7 | 1.3.6.1.4.1.22764.1.1.2.3.3.9 | TruthValue | RW | |
scalar · TruthValue · read-write · current The seventh carrier of the considered group and band is a notch carrier. The true value means the current carrier is a notch. | ||||
| SplcNodeNotchesInputCarrier8 | 1.3.6.1.4.1.22764.1.1.2.3.3.10 | TruthValue | RW | |
scalar · TruthValue · read-write · current The eighth carrier of the considered group and band is a notch carrier. The true value means the current carrier is a notch. | ||||
| SplcNodeNotchesInputProceed | 1.3.6.1.4.1.22764.1.1.2.3.3.11 | TruthValue | RW | |
scalar · TruthValue · read-write · current True to request a modification of the carrier notches associated to the considered group and band. | ||||
| SplcNodeNotchesInputResult | 1.3.6.1.4.1.22764.1.1.2.3.3.12 | ResultValue | RO | |
scalar · ResultValue · read-only · current Result value of the requested node carrier notches value changes. | ||||
| SplcNodePilots | 1.3.6.1.4.1.22764.1.1.2.3.4 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The values of the pilot for all the node bands. The expected format is VALUE VALUE VALUE ... VALUE. Each value is a pair of octets representing the pilot values. There is one pair (pilot1 pilot2) for each of the 7 bands. | ||||
| TplcNodePilotsTable | 1.3.6.1.4.1.22764.1.1.2.3.5 | NA | ||
table · not-accessible · current This table contains pilot values used by default on all channels. | ||||
| RplcNodePilotsEntry | 1.3.6.1.4.1.22764.1.1.2.3.5.1 | NA | ||
row · not-accessible · current This row contains pilot values used by default on a band. The band is defined by the index plcNodePilotsBandIndex. | ||||
| CplcNodePilotsBandIndex | 1.3.6.1.4.1.22764.1.1.2.3.5.1.1 | BandValue | NA | |
column · BandValue · not-accessible · current The band number on which the pilot values are defined. | ||||
| CplcNodePilot1 | 1.3.6.1.4.1.22764.1.1.2.3.5.1.2 | PilotValue | RO | |
column · PilotValue · read-only · current The default carrier wave number which supports the first pilot wave. | ||||
| CplcNodePilot2 | 1.3.6.1.4.1.22764.1.1.2.3.5.1.3 | PilotValue | RO | |
column · PilotValue · read-only · current The default carrier wave number which supports the second pilot wave. | ||||
| NplcNodePilotsInput | 1.3.6.1.4.1.22764.1.1.2.3.6 | |||
| SplcNodePilotsInputBand | 1.3.6.1.4.1.22764.1.1.2.3.6.1 | BandValue | RW | |
scalar · BandValue · read-write · current The band number on which the pilot values changes are requested. | ||||
| SplcInputNodePilot1 | 1.3.6.1.4.1.22764.1.1.2.3.6.2 | PilotValue | RW | |
scalar · PilotValue · read-write · current The default carrier wave number which supports the first pilot wave of the considered band. | ||||
| SplcInputNodePilot2 | 1.3.6.1.4.1.22764.1.1.2.3.6.3 | PilotValue | RW | |
scalar · PilotValue · read-write · current The default carrier wave number which supports the second pilot wave of the considered band. | ||||
| SplcNodePilotsInputProceed | 1.3.6.1.4.1.22764.1.1.2.3.6.4 | TruthValue | RW | |
scalar · TruthValue · read-write · current True to request a modification of the pilot values associated to the considered band. | ||||
| SplcNodePilotsInputResult | 1.3.6.1.4.1.22764.1.1.2.3.6.5 | ResultValue | RO | |
scalar · ResultValue · read-only · current Result value of the requested node pilot values changes. | ||||
| TplcNodeAdaptsStringTable | 1.3.6.1.4.1.22764.1.1.2.3.7 | NA | ||
table · not-accessible · current This table contains string values for a quick access to the adapt configurations of all the carriers. | ||||
| RplcNodeAdaptsStringEntry | 1.3.6.1.4.1.22764.1.1.2.3.7.1 | NA | ||
row · not-accessible · current This row contains string values for a quick access to the adapt configuration of each carrier of a band. | ||||
| CplcNodeAdaptsStringBandIndex | 1.3.6.1.4.1.22764.1.1.2.3.7.1.1 | BandValue | NA | |
column · BandValue · not-accessible · current The band number on which the adapt values are defined. | ||||
| CplcNodeAdaptsStringBand | 1.3.6.1.4.1.22764.1.1.2.3.7.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The adapt values of the 128 carriers of a band. The expected format is VALUE VALUE VALUE ... VALUE. Each value is two octets representing one adapt carrier level. There are ( 16 groups * 8 carriers) = 128 values. | ||||
| TplcNodeAdaptsTable | 1.3.6.1.4.1.22764.1.1.2.3.8 | NA | ||
table · not-accessible · current This table contains adapt level configuration for each carrier of the node. | ||||
| RplcNodeAdaptsEntry | 1.3.6.1.4.1.22764.1.1.2.3.8.1 | NA | ||
row · not-accessible · current This row contains adapt level values for a group of carriers. The group is defined by the couple (plcNodeAdaptsBandIndex,plcNodeAdaptsGroupIndex). | ||||
| CplcNodeAdaptsBandIndex | 1.3.6.1.4.1.22764.1.1.2.3.8.1.1 | BandValue | NA | |
column · BandValue · not-accessible · current The band number on which the adapt values are defined. | ||||
| CplcNodeAdaptsGroupIndex | 1.3.6.1.4.1.22764.1.1.2.3.8.1.2 | GroupValue | NA | |
column · GroupValue · not-accessible · current The group number on which the adapt values are defined. | ||||
| CplcNodeAdaptsCarrier1 | 1.3.6.1.4.1.22764.1.1.2.3.8.1.3 | AdaptValue | RO | |
column · AdaptValue · read-only · current The adapt level of the first carrier of the group. | ||||
| CplcNodeAdaptsCarrier2 | 1.3.6.1.4.1.22764.1.1.2.3.8.1.4 | AdaptValue | RO | |
column · AdaptValue · read-only · current The adapt level of the second carrier of the group. | ||||
| CplcNodeAdaptsCarrier3 | 1.3.6.1.4.1.22764.1.1.2.3.8.1.5 | AdaptValue | RO | |
column · AdaptValue · read-only · current The adapt level of the third carrier of the group. | ||||
| CplcNodeAdaptsCarrier4 | 1.3.6.1.4.1.22764.1.1.2.3.8.1.6 | AdaptValue | RO | |
column · AdaptValue · read-only · current The adapt level of the fourth carrier of the group. | ||||
| CplcNodeAdaptsCarrier5 | 1.3.6.1.4.1.22764.1.1.2.3.8.1.7 | AdaptValue | RO | |
column · AdaptValue · read-only · current The adapt level of the fifth carrier of the group. | ||||
| CplcNodeAdaptsCarrier6 | 1.3.6.1.4.1.22764.1.1.2.3.8.1.8 | AdaptValue | RO | |
column · AdaptValue · read-only · current The adapt level of the sixth carrier of the group. | ||||
| CplcNodeAdaptsCarrier7 | 1.3.6.1.4.1.22764.1.1.2.3.8.1.9 | AdaptValue | RO | |
column · AdaptValue · read-only · current The adapt level of the seventh carrier of the group. | ||||
| CplcNodeAdaptsCarrier8 | 1.3.6.1.4.1.22764.1.1.2.3.8.1.10 | AdaptValue | RO | |
column · AdaptValue · read-only · current The adapt level of the eighth carrier of the group. | ||||
| NplcNodeAdaptsInput | 1.3.6.1.4.1.22764.1.1.2.3.9 | |||
| SplcNodeAdaptsInputBand | 1.3.6.1.4.1.22764.1.1.2.3.9.1 | BandValue | RW | |
scalar · BandValue · read-write · current The band number on which the adapt level value changes are requested. | ||||
| SplcNodeAdaptsInputGroup | 1.3.6.1.4.1.22764.1.1.2.3.9.2 | GroupValue | RW | |
scalar · GroupValue · read-write · current The group number on which the adapt level value changes are requested. | ||||
| SplcNodeAdaptsInputCarrier1 | 1.3.6.1.4.1.22764.1.1.2.3.9.3 | AdaptValue | RW | |
scalar · AdaptValue · read-write · current The adapt level of the first carrier of the considered group of the chosen band. | ||||
| SplcNodeAdaptsInputCarrier2 | 1.3.6.1.4.1.22764.1.1.2.3.9.4 | AdaptValue | RW | |
scalar · AdaptValue · read-write · current The adapt level of the second carrier of the considered group of the chosen band. | ||||
| SplcNodeAdaptsInputCarrier3 | 1.3.6.1.4.1.22764.1.1.2.3.9.5 | AdaptValue | RW | |
scalar · AdaptValue · read-write · current The adapt level of the third carrier of the considered group of the chosen band. | ||||
| SplcNodeAdaptsInputCarrier4 | 1.3.6.1.4.1.22764.1.1.2.3.9.6 | AdaptValue | RW | |
scalar · AdaptValue · read-write · current The adapt level of the fourth carrier of the considered group of the chosen band. | ||||
| SplcNodeAdaptsInputCarrier5 | 1.3.6.1.4.1.22764.1.1.2.3.9.7 | AdaptValue | RW | |
scalar · AdaptValue · read-write · current The adapt level of the fifth carrier of the considered group of the chosen band. | ||||
| SplcNodeAdaptsInputCarrier6 | 1.3.6.1.4.1.22764.1.1.2.3.9.8 | AdaptValue | RW | |
scalar · AdaptValue · read-write · current The adapt level of the sixth carrier of the considered group of the chosen band. | ||||
| SplcNodeAdaptsInputCarrier7 | 1.3.6.1.4.1.22764.1.1.2.3.9.9 | AdaptValue | RW | |
scalar · AdaptValue · read-write · current The adapt level of the seventh carrier of the considered group of the chosen band. | ||||
| SplcNodeAdaptsInputCarrier8 | 1.3.6.1.4.1.22764.1.1.2.3.9.10 | AdaptValue | RW | |
scalar · AdaptValue · read-write · current The adapt level of the eighth carrier of the considered group of the chosen band. | ||||
| SplcNodeAdaptsInputProceed | 1.3.6.1.4.1.22764.1.1.2.3.9.11 | TruthValue | RW | |
scalar · TruthValue · read-write · current True to request a modification of the carrier adapt level associated to the considered group and band. | ||||
| SplcNodeAdaptsInputResult | 1.3.6.1.4.1.22764.1.1.2.3.9.12 | ResultValue | RO | |
scalar · ResultValue · read-only · current Result value of the requested node adapt level value changes. | ||||
| TplcNodeNetConfigTable | 1.3.6.1.4.1.22764.1.1.2.3.10 | NA | ||
table · not-accessible · current This table contains ip and mac addresses of the node. | ||||
| RplcNodeNetConfigEntry | 1.3.6.1.4.1.22764.1.1.2.3.10.1 | NA | ||
row · not-accessible · current This row contains ip and mac address used by an interface.
| ||||
| CplcNodeIpAddr | 1.3.6.1.4.1.22764.1.1.2.3.10.1.1 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of the IP layer above the interface. | ||||
| CplcNodeNetMask | 1.3.6.1.4.1.22764.1.1.2.3.10.1.2 | IpAddress | RW | |
column · IpAddress · read-write · current The IP Subnet mask of the IP layer above the interface. | ||||
| CplcNodeMacAddr | 1.3.6.1.4.1.22764.1.1.2.3.10.1.3 | MacAddress | RW | |
column · MacAddress · read-write · current The MAC address of the MAC layer above the interface. | ||||
| CplcNodeGateway | 1.3.6.1.4.1.22764.1.1.2.3.10.1.4 | IpAddress | RW | |
column · IpAddress · read-write · current The Gateway address of the IP layer above the interface. | ||||
| NplcNodeActions | 1.3.6.1.4.1.22764.1.1.2.3.11 | |||
| NplcNodeActionsCommit | 1.3.6.1.4.1.22764.1.1.2.3.11.1 | |||
| SplcNodeActionsCommitProceed | 1.3.6.1.4.1.22764.1.1.2.3.11.1.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current True to request the commit of the configuration changes into the flash memory | ||||
| SplcNodeActionsCommitResult | 1.3.6.1.4.1.22764.1.1.2.3.11.1.2 | ResultValue | RO | |
scalar · ResultValue · read-only · current Result value of the requested flash commit operation. | ||||
| NplcNodeActionsReset | 1.3.6.1.4.1.22764.1.1.2.3.11.2 | |||
| SplcNodeActionsResetProceed | 1.3.6.1.4.1.22764.1.1.2.3.11.2.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current True to request the reset of the node. This operation will terminate the communication between the manager and the node | ||||
| NplcNodeActionsCarrier | 1.3.6.1.4.1.22764.1.1.2.3.11.3 | |||
| SplcNodeActionsCarrierFlatProceed | 1.3.6.1.4.1.22764.1.1.2.3.11.3.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current True to request the equipment to flat the signal | ||||
| NplcSNAnalyser | 1.3.6.1.4.1.22764.1.1.2.4 | |||
| SplcSNAnalyserEnable | 1.3.6.1.4.1.22764.1.1.2.4.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current true if the modem should turn to spectrum analyser mode. In this mode the modem enters a receive only mode, and captures periodic samples of the signal on the powerline. The spectrum analyser mode shall be disabled for normal powerline modem operation.
| ||||
| TplcSNAnalyserTable | 1.3.6.1.4.1.22764.1.1.2.4.2 | NA | ||
table · not-accessible · current This table gathers all statistic data specific to SPC200 chip relative to plc analyser. | ||||
| RplcSNAnalyserEntry | 1.3.6.1.4.1.22764.1.1.2.4.2.1 | NA | ||
row · not-accessible · current This row contains statistic data specific to SPC200 chip relative to a band.
| ||||
| CplcSNAnalyserMinSignal | 1.3.6.1.4.1.22764.1.1.2.4.2.1.1 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Minimum signal measured over several samples for the associated carrier wave entry. The value is expressed in Glomer© which can be converted in dBm/Hz using the following formula: dBm/Hz = 19*log10(Glomer©) - 113 | ||||
| CplcSNAnalyserMaxSignal | 1.3.6.1.4.1.22764.1.1.2.4.2.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Maximum signal measured on several samples for the associated carrier wave entry. The value is expressed in Glomer© which can be converted in dBm/Hz using the following formula: dBm/Hz = 19*log10(Glomer©) - 113 | ||||
| CplcSNAnalyserAvgSignal | 1.3.6.1.4.1.22764.1.1.2.4.2.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Average signal measured on several samples for the associated carrier wave entry. The value is expressed in Glomer© which can be converted in dBm/Hz using the following formula: dBm/Hz = 19*log10(Glomer©) - 113 | ||||
| CplcSNAnalyserLastSignal | 1.3.6.1.4.1.22764.1.1.2.4.2.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Signal measured for last sample on the associated carrier wave entry. The value is expressed in Glomer© which can be converted in dBm/Hz using the following formula: dBm/Hz = 19*log10(Glomer©) - 113 | ||||
| CplcSNAnalyserFFTDiv | 1.3.6.1.4.1.22764.1.1.2.4.2.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current FFT division factor on the associated band. | ||||
| SplcSNAnalyserAGC | 1.3.6.1.4.1.22764.1.1.2.4.3 | Integer32 (0..255) | RO | |
scalar · Integer32 (0..255) · read-only · current Gain factor in dB, as used by the Automatic Gain Control last sample | ||||
| NplcAGCAnalyser | 1.3.6.1.4.1.22764.1.1.2.5 | |||
| SplcAGCAnalyserEnable | 1.3.6.1.4.1.22764.1.1.2.5.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current
| ||||
| SplcAGCAnalyserSamplesPart1 | 1.3.6.1.4.1.22764.1.1.2.5.2 | OCTET STRING | RO | |
| SplcAGCAnalyserSamplesPart2 | 1.3.6.1.4.1.22764.1.1.2.5.3 | OCTET STRING | RO | |
| NplcBssId | 1.3.6.1.4.1.22764.1.1.2.6 | |||
| SplcMasterBssId | 1.3.6.1.4.1.22764.1.1.2.6.1 | INTEGER (0..99) | RW | |
scalar · INTEGER (0..99) · read-write · current The value of the master Bss Id | ||||
| SplcSlaveBssId | 1.3.6.1.4.1.22764.1.1.2.6.2 | INTEGER (0..99) | RW | |
scalar · INTEGER (0..99) · read-write · current The value of the slave Bss Id | ||||
| NplcSpy | 1.3.6.1.4.1.22764.1.1.2.7 | |||
| SplcSpyIsDynamic | 1.3.6.1.4.1.22764.1.1.2.7.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current True to set the spy dynamic mode | ||||
| SplcStaticSpySynchBandNb | 1.3.6.1.4.1.22764.1.1.2.7.2 | BandValue | RW | |
scalar · BandValue · read-write · current The synchronization band number used for static spy mode | ||||
| NsoftwareMgnt | 1.3.6.1.4.1.22764.1.1.3 | |||
| ScurrentSoftwareVersion | 1.3.6.1.4.1.22764.1.1.3.1 | DisplayString (SIZE (0..255)) | RO | |
scalar · DisplayString (SIZE (0..255)) · read-only · current The name of the current software release. | ||||
| ScurrentSoftwareBoardVersion | 1.3.6.1.4.1.22764.1.1.3.2 | DisplayString (SIZE (0..255)) | RO | |
scalar · DisplayString (SIZE (0..255)) · read-only · current The name of the current software board release. | ||||
| ScurrentSoftwareAFEVersion | 1.3.6.1.4.1.22764.1.1.3.3 | DisplayString (SIZE (0..255)) | RO | |
scalar · DisplayString (SIZE (0..255)) · read-only · current The name of the current software Analog Front End release. | ||||
| TsoftwareTable | 1.3.6.1.4.1.22764.1.1.3.4 | NA | ||
table · not-accessible · current This table contains the current and reserve softwares of the node. | ||||
| RsoftwareEntry | 1.3.6.1.4.1.22764.1.1.3.4.1 | NA | ||
| CsoftwareIndex | 1.3.6.1.4.1.22764.1.1.3.4.1.1 | SoftwareIndex | NA | |
column · SoftwareIndex · not-accessible · current The index number of the software. | ||||
| CsoftwareVersion | 1.3.6.1.4.1.22764.1.1.3.4.1.2 | DisplayString (SIZE (0..255)) | RO | |
column · DisplayString (SIZE (0..255)) · read-only · current The name of the software release. | ||||
| NsoftwareUpload | 1.3.6.1.4.1.22764.1.1.3.5 | |||
| SsoftwareUploadTFTPServerIP | 1.3.6.1.4.1.22764.1.1.3.5.1 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of the TFTP serveur | ||||
| SsoftwareUploadLogin | 1.3.6.1.4.1.22764.1.1.3.5.2 | DisplayString (SIZE (0..16)) | RW | |
scalar · DisplayString (SIZE (0..16)) · read-write · current The user login on the TFTP server | ||||
| SsoftwareUploadPassword | 1.3.6.1.4.1.22764.1.1.3.5.3 | DisplayString (SIZE (0..16)) | RW | |
scalar · DisplayString (SIZE (0..16)) · read-write · current The user password on the TFTP server. Warning: This field is displayed using 6 * characters | ||||
| SsoftwareUploadFileName | 1.3.6.1.4.1.22764.1.1.3.5.4 | DisplayString (SIZE (0..255)) | RW | |
scalar · DisplayString (SIZE (0..255)) · read-write · current The software file name to upload | ||||
| SsoftwareUploadProceed | 1.3.6.1.4.1.22764.1.1.3.5.5 | TruthValue | RW | |
scalar · TruthValue · read-write · current True to request the uploading to start | ||||
| SsoftwareUploadResult | 1.3.6.1.4.1.22764.1.1.3.5.6 | SoftwareActionResultValue | RO | |
scalar · SoftwareActionResultValue · read-only · current Result value of the requested uploading | ||||
| SsoftwareUploadTFTPServerPort | 1.3.6.1.4.1.22764.1.1.3.5.7 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current The service port of the TFTP server | ||||
| NsoftwareAction | 1.3.6.1.4.1.22764.1.1.3.6 | |||
| SsoftwareActionIndex | 1.3.6.1.4.1.22764.1.1.3.6.1 | SoftwareIndex | RW | |
scalar · SoftwareIndex · read-write · current The index of the reserve software | ||||
| SsoftwareActionType | 1.3.6.1.4.1.22764.1.1.3.6.2 | SoftwareActionType | RW | |
scalar · SoftwareActionType · read-write · current Type of the software action software: switch, remove | ||||
| SsoftwareActionProceed | 1.3.6.1.4.1.22764.1.1.3.6.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current True to request the switch between the current and the reserver software to start | ||||
| SsoftwareActionResult | 1.3.6.1.4.1.22764.1.1.3.6.4 | SoftwareActionResultValue | RO | |
scalar · SoftwareActionResultValue · read-only · current Result value of the requested action | ||||
| NplcConformance | 1.3.6.1.4.1.22764.1.1.4 | |||
| NplcCompliances | 1.3.6.1.4.1.22764.1.1.4.1 | |||
| MplcCompliance | 1.3.6.1.4.1.22764.1.1.4.1.1 | |||
compliance · current The compliance statement for SPC200 chip.
| ||||
| NplcGroups | 1.3.6.1.4.1.22764.1.1.4.2 | |||
| GnodeGroup | 1.3.6.1.4.1.22764.1.1.4.2.1 | |||
group · current A collection of objects providing node configuration information.
| ||||
| GinputNodeGroup | 1.3.6.1.4.1.22764.1.1.4.2.2 | |||
group · current A collection of objects used to request node configuration information changes.
| ||||
| GtopologyGroup | 1.3.6.1.4.1.22764.1.1.4.2.3 | |||
group · current A collection of objects providing topology configuration.
| ||||
| GinputTopologyGroup | 1.3.6.1.4.1.22764.1.1.4.2.4 | |||
group · current A collection of objects used to request topology configuration changes.
| ||||
| GstatisticGroup | 1.3.6.1.4.1.22764.1.1.4.2.5 | |||
group · current A collection of objects providing statistic data on node and plc link performances. | ||||
| GsoftwareGroup | 1.3.6.1.4.1.22764.1.1.4.2.6 | |||
group · current A collection of objects providing software management
| ||||
| GanalyserGroup | 1.3.6.1.4.1.22764.1.1.4.2.7 | |||
group · current A collection of objects providing spectrum analyser data | ||||
| NagentCapabilities | 1.3.6.1.4.1.22764.1.1.4.3 | |||
node · current The SPC200 chip SNMP agent capabilities | ||||
| NipExt | 1.3.6.1.4.1.22764.1.4 | |||
node · current Extended ip needed for SPiDCOM functionalities | ||||
| SipDynamic | 1.3.6.1.4.1.22764.1.4.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current True if Ip address is set dynamically | ||||
| GipExtGroup | 1.3.6.1.4.1.22764.1.4.2 | |||
Textual conventions
AdaptValueInteger32 (0..8191)The adapt level integer value.
BandValueInteger32 (1..7)A channel is composed of 7 bands.
CarrierValueInteger32 (1..8)A group is composed of 8 carriers.
ChannelBandwidthValueInteger32The channel bandwidth integer value.
EstimationModeINTEGERautomatic(1)manual(2)The type of Channel estimation process. Two are available: - automatic, the equipment negociates the best configuration with the remote equipment, - manual, the operator defines the configuration.
GroupValueInteger32 (1..16)A band is composed of 16 groups.
ModulationValueINTEGERbpsk(2)none(1)qam16(4)qam256(6)qam64(5)qpsk(3)Modulation amplitude used by a group of carriers.
PilotValueInteger32 (1..128)The pilot carrier wave can be chosen between the carrier 1 up to carrier 128 inside a band carrier range.
PlcChannelTypeINTEGERrx(1)rxLast(2)tx(3)The different type of plc channels: rx for the current reception channel, rx last for the last reception channel, tx for the current transmission channel.
PlcModeTypeINTEGERad-hoc(0)master(2)slave(1)Type of software management action.
ResultValueINTEGERfail(2)success(1)Result value of input vectors.
SoftwareActionResultValueINTEGERfileNotExist(2)flashCorrupted(4)flashExhausted(3)genericError(7)invalidParameter(6)notEnoughMemory(5)on-going(1)success(0)Result value of software action process.
SoftwareActionTypeINTEGERremove(2)switch(1)Type of software management action.
SoftwareIndexInteger32 (1..10)The software index.