SCS-ks-MIB
CARELThis is the unofficial MIB module for the SCS KS.
snmptranslate -m SCS-ks-MIB -Tpsnmpwalk -v2c -c <community> -m SCS-ks-MIB <host> 1.3.6.1.4.1.9839.1.1Imports
| IF-MIB | ifEntry, ifIndex |
|---|---|
| RFC1155-SMI | Counter32, Gauge32 |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-MIB | sysContact, sysLocation, sysName |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ncarel | 1.3.6.1.4.1.9839 | ||||||||||||
| Nsystm | 1.3.6.1.4.1.9839.1 | ||||||||||||
| Iscs-ks | 1.3.6.1.4.1.9839.1.1 | ||||||||||||
identity This is the unofficial MIB module for the SCS KS. | |||||||||||||
| Nscs | 1.3.6.1.4.1.9839.1.2 | ||||||||||||
| Sstatus-evaporator-fan | 1.3.6.1.4.1.9839.1.2.1 | Integer32 (0..1) | RO | 0 | |||||||||
scalar · Integer32 (0..1) · read-only · current Evaporator Fan alarm 0=OK;1=Error
Example values from LibreNMS test devices
| |||||||||||||
| Sstatus-condenser-fan | 1.3.6.1.4.1.9839.1.2.2 | Integer32 (0..1) | RO | 0 | |||||||||
scalar · Integer32 (0..1) · read-only · current Condenser Fan alarm 0=OK;1=Error
Example values from LibreNMS test devices
| |||||||||||||
| Sstatus-compressor | 1.3.6.1.4.1.9839.1.2.3 | Integer32 (0..1) | RO | 0 | |||||||||
scalar · Integer32 (0..1) · read-only · current Compressor alarm 0=OK;1=Error
Example values from LibreNMS test devices
| |||||||||||||
| Sstatus-heater-thermal-protection | 1.3.6.1.4.1.9839.1.2.4 | Integer32 (0..1) | RO | 0 | |||||||||
scalar · Integer32 (0..1) · read-only · current Heater thermal protection alarm 0=OK;1=Error
Example values from LibreNMS test devices
| |||||||||||||
| Sstatus-exhaust-air-sensor | 1.3.6.1.4.1.9839.1.2.5 | Integer32 (0..1) | RO | 0 | |||||||||
scalar · Integer32 (0..1) · read-only · current Exhaust air sensor alarm 0=OK;1=Error
Example values from LibreNMS test devices
| |||||||||||||
| Sstatus-supply-air-sensor | 1.3.6.1.4.1.9839.1.2.6 | Integer32 (0..1) | RO | 0 | |||||||||
scalar · Integer32 (0..1) · read-only · current Supply air sensor alarm 0=OK;1=Error
Example values from LibreNMS test devices
| |||||||||||||
| Sstatus-outside-sensor | 1.3.6.1.4.1.9839.1.2.7 | Integer32 (0..1) | RO | 0 | |||||||||
scalar · Integer32 (0..1) · read-only · current Outside temperature sensor alarm 0=OK;1=Error
Example values from LibreNMS test devices
| |||||||||||||
| Sstatus-room-temperature-sensor | 1.3.6.1.4.1.9839.1.2.8 | Integer32 (0..1) | RO | 0 | |||||||||
scalar · Integer32 (0..1) · read-only · current Temperature room sensor alarm 0=OK;1=Error
Example values from LibreNMS test devices
| |||||||||||||
| Sstatus-room-humidity-sensor | 1.3.6.1.4.1.9839.1.2.9 | Integer32 (0..1) | RO | 0 | |||||||||
scalar · Integer32 (0..1) · read-only · current Humidity room sensor alarm 0=OK;1=Error
Example values from LibreNMS test devices
| |||||||||||||
| Sstatus-min-exhaust-air-temperature | 1.3.6.1.4.1.9839.1.2.10 | Integer32 (0..1) | RO | 0 | |||||||||
scalar · Integer32 (0..1) · read-only · current Minimum exhaust air temperature alarm 0=OK;1=Error
Example values from LibreNMS test devices
| |||||||||||||
| Sstatus-max-exhaust-air-temperature | 1.3.6.1.4.1.9839.1.2.11 | Integer32 (0..1) | RO | 0 | |||||||||
scalar · Integer32 (0..1) · read-only · current Maximum exhaust air temperature alarm 0=OK;1=Error
Example values from LibreNMS test devices
| |||||||||||||
| Sstatus-min-supply-air-temperature | 1.3.6.1.4.1.9839.1.2.12 | Integer32 (0..1) | RO | 0 | |||||||||
scalar · Integer32 (0..1) · read-only · current Minimum supply air temperature alarm 0=OK;1=Error
Example values from LibreNMS test devices
| |||||||||||||
| Sstatus-water-sensor | 1.3.6.1.4.1.9839.1.2.13 | Integer32 (0..1) | RO | 0 | |||||||||
scalar · Integer32 (0..1) · read-only · current Water sensor alarm 0=OK;1=Error
Example values from LibreNMS test devices
| |||||||||||||
| Sstatus-filter-monitoring | 1.3.6.1.4.1.9839.1.2.14 | Integer32 (0..1) | RO | 0 | |||||||||
scalar · Integer32 (0..1) · read-only · current Filter monitoring alarm 0=OK;1=Error
Example values from LibreNMS test devices
| |||||||||||||
| Sexhaust-air-temperature | 1.3.6.1.4.1.9839.1.2.15 | Integer32 (-999..999) | RO | 212 | |||||||||
scalar · Integer32 (-999..999) · read-only · current Exhaust air temperature 235 = 23.5 degree Celsius
Example values from LibreNMS test devices
| |||||||||||||
| Ssupply-air-temperature | 1.3.6.1.4.1.9839.1.2.16 | Integer32 (-999..999) | RO | 209 | |||||||||
scalar · Integer32 (-999..999) · read-only · current Supply air temperature 235 = 23.5 degree Celsius
Example values from LibreNMS test devices
| |||||||||||||
| Soutside-air-temperature | 1.3.6.1.4.1.9839.1.2.17 | Integer32 (-999..999) | RO | 87 | |||||||||
scalar · Integer32 (-999..999) · read-only · current Outside air temperature 235 = 23.5 degree Celsius
Example values from LibreNMS test devices
| |||||||||||||
| Sroom-temperature | 1.3.6.1.4.1.9839.1.2.18 | Integer32 (-999..999) | RO | 196 | |||||||||
scalar · Integer32 (-999..999) · read-only · current Room temperature 235 = 23.5 degree Celsius
Example values from LibreNMS test devices
| |||||||||||||
| Sroom-humidity | 1.3.6.1.4.1.9839.1.2.19 | Integer32 (-999..999) | RO | 286 | |||||||||
scalar · Integer32 (-999..999) · read-only · current Room humidity 235 = 23.5 %
Example values from LibreNMS test devices
| |||||||||||||
| Sstatus-operational-status | 1.3.6.1.4.1.9839.1.2.20 | Integer32 (0..1) | RO | 1 | |||||||||
scalar · Integer32 (0..1) · read-only · current Operational status 0=Off;1=Running
Example values from LibreNMS test devices
| |||||||||||||
| Sstatus-collective-fault | 1.3.6.1.4.1.9839.1.2.21 | Integer32 (0..1) | RO | ||||||||||
scalar · Integer32 (0..1) · read-only · current Collective fault alarm 0=Error;1=Ok
| |||||||||||||