CAREL-RITTAL-LCP-3311-MIB
CARELCustom MIB for Rittal LCP 3311 chillers connected to a pco web card
snmptranslate -m CAREL-RITTAL-LCP-3311-MIB -Tpsnmpwalk -v2c -c <community> -m CAREL-RITTAL-LCP-3311-MIB <host> 1.3.6.1.4.1.9839Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Icarel | 1.3.6.1.4.1.9839 | ||||||||||||
identity Custom MIB for Rittal LCP 3311 chillers connected to a pco web card | |||||||||||||
| Nrittal | 1.3.6.1.4.1.9839.2606 | ||||||||||||
| NrittalLCP3311 | 1.3.6.1.4.1.9839.2606.2 | ||||||||||||
| Nsensors | 1.3.6.1.4.1.9839.2606.2.1 | ||||||||||||
| Ndigital | 1.3.6.1.4.1.9839.2606.2.1.1 | ||||||||||||
| ScompressorOverloadAlarm | 1.3.6.1.4.1.9839.2606.2.1.1.2 | INTEGER | RO | ok(0) | |||||||||
scalar · INTEGER · read-only · current Compressor overload alarm
ok (0),
alarm (1)
Example values from LibreNMS test devices
| |||||||||||||
| ShighPressureAlarm | 1.3.6.1.4.1.9839.2606.2.1.1.3 | INTEGER | RO | ok(0) | |||||||||
scalar · INTEGER · read-only · current High pressure alarm
ok (0),
alarm (1)
Example values from LibreNMS test devices
| |||||||||||||
| SremoteOnOff | 1.3.6.1.4.1.9839.2606.2.1.1.8 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Remote On/Off
off (0),
on (1)
| |||||||||||||
| SinverterAlarm | 1.3.6.1.4.1.9839.2606.2.1.1.11 | INTEGER | RO | ok(0) | |||||||||
scalar · INTEGER · read-only · current Inverter alarm
ok (0),
alarm (1)
Example values from LibreNMS test devices
| |||||||||||||
| SdriveAlarm | 1.3.6.1.4.1.9839.2606.2.1.1.12 | INTEGER | RO | ok(0) | |||||||||
scalar · INTEGER · read-only · current Power+ drive off-line alarm
ok (0),
alarm (1)
Example values from LibreNMS test devices
| |||||||||||||
| SinverterOnOff | 1.3.6.1.4.1.9839.2606.2.1.1.17 | INTEGER | RO | on(1) | |||||||||
scalar · INTEGER · read-only · current Inverter On/Off
off (0),
on (1)
Example values from LibreNMS test devices
| |||||||||||||
| SgeneralAlarm | 1.3.6.1.4.1.9839.2606.2.1.1.23 | INTEGER | RO | alarm(1) | |||||||||
scalar · INTEGER · read-only · current General alarm
alarm (0),
ok (1)
Example values from LibreNMS test devices
| |||||||||||||
| SresetAllAlarms | 1.3.6.1.4.1.9839.2606.2.1.1.29 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Reset all alarms
no (0),
yes (1)
| |||||||||||||
| ScompressorEnvelopeAlarm | 1.3.6.1.4.1.9839.2606.2.1.1.30 | INTEGER | RO | ok(0) | |||||||||
scalar · INTEGER · read-only · current Compressor forced off working out envelope
ok (0),
alarm (1)
Example values from LibreNMS test devices
| |||||||||||||
| ScompressorStartupFailureAlarm | 1.3.6.1.4.1.9839.2606.2.1.1.31 | INTEGER | RO | ok(0) | |||||||||
scalar · INTEGER · read-only · current Compressor startup failure alarm, reached max retries
ok (0),
alarm (1)
Example values from LibreNMS test devices
| |||||||||||||
| SmaxDischargeTemperatureAlarm | 1.3.6.1.4.1.9839.2606.2.1.1.33 | INTEGER | RO | ok(0) | |||||||||
scalar · INTEGER · read-only · current Maximum discharge temperature has been reached
ok (0),
alarm (1)
Example values from LibreNMS test devices
| |||||||||||||
| ScompressorDeltaPressureAlarm | 1.3.6.1.4.1.9839.2606.2.1.1.35 | INTEGER | RO | ok(0) | |||||||||
scalar · INTEGER · read-only · current Delta pressure too big to startup compressor
ok (0),
alarm (1)
Example values from LibreNMS test devices
| |||||||||||||
| SoilReturnAlarm | 1.3.6.1.4.1.9839.2606.2.1.1.36 | INTEGER | RO | ok(0) | |||||||||
scalar · INTEGER · read-only · current Oil return alarm for when the compressor is running. Lubrication issue.
ok (0),
alarm (1)
Example values from LibreNMS test devices
| |||||||||||||
| SoutputTemperatureTopProbeAlarm | 1.3.6.1.4.1.9839.2606.2.1.1.38 | INTEGER | RO | ok(0) | |||||||||
scalar · INTEGER · read-only · current Top output temperature probe broken
ok (0),
alarm (1)
Example values from LibreNMS test devices
| |||||||||||||
| SoutputTemperatureMidProbeAlarm | 1.3.6.1.4.1.9839.2606.2.1.1.39 | INTEGER | RO | ok(0) | |||||||||
scalar · INTEGER · read-only · current Mid output temperature probe broken
ok (0),
alarm (1)
Example values from LibreNMS test devices
| |||||||||||||
| SoutputTemperatureBottomProbeAlarm | 1.3.6.1.4.1.9839.2606.2.1.1.40 | INTEGER | RO | ok(0) | |||||||||
scalar · INTEGER · read-only · current Bottom output temperature probe broken
ok (0),
alarm (1)
Example values from LibreNMS test devices
| |||||||||||||
| SinputTemperatureTopProbeAlarm | 1.3.6.1.4.1.9839.2606.2.1.1.42 | INTEGER | RO | ok(0) | |||||||||
scalar · INTEGER · read-only · current Top input temperature probe broken
ok (0),
alarm (1)
Example values from LibreNMS test devices
| |||||||||||||
| SinputTemperatureMidProbeAlarm | 1.3.6.1.4.1.9839.2606.2.1.1.43 | INTEGER | RO | ok(0) | |||||||||
scalar · INTEGER · read-only · current Mid input temperature probe broken
ok (0),
alarm (1)
Example values from LibreNMS test devices
| |||||||||||||
| SinputTemperatureBottomProbeAlarm | 1.3.6.1.4.1.9839.2606.2.1.1.44 | INTEGER | RO | ok(0) | |||||||||
scalar · INTEGER · read-only · current Bottom input temperature probe broken
ok (0),
alarm (1)
Example values from LibreNMS test devices
| |||||||||||||
| ScompressorDischargeTemperatureProbeAlarm | 1.3.6.1.4.1.9839.2606.2.1.1.45 | INTEGER | RO | ok(0) | |||||||||
scalar · INTEGER · read-only · current Compressor discharge temperature probe broken
ok (0),
alarm (1)
Example values from LibreNMS test devices
| |||||||||||||
| ScompressorSuctionTemperatureProbeAlarm | 1.3.6.1.4.1.9839.2606.2.1.1.46 | INTEGER | RO | ok(0) | |||||||||
scalar · INTEGER · read-only · current Compressor suction temperature probe broken
ok (0),
alarm (1)
Example values from LibreNMS test devices
| |||||||||||||
| ScompressorDischargePressureProbeAlarm | 1.3.6.1.4.1.9839.2606.2.1.1.47 | INTEGER | RO | ok(0) | |||||||||
scalar · INTEGER · read-only · current Compressor discharge pressure probe broken
ok (0),
alarm (1)
Example values from LibreNMS test devices
| |||||||||||||
| ScompressorSuctionPressureProbeAlarm | 1.3.6.1.4.1.9839.2606.2.1.1.48 | INTEGER | RO | ok(0) | |||||||||
scalar · INTEGER · read-only · current Compressor suction pressure probe broken
ok (0),
alarm (1)
Example values from LibreNMS test devices
| |||||||||||||
| Sreboot | 1.3.6.1.4.1.9839.2606.2.1.1.100 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Reboot the system
no (0),
yes (1)
| |||||||||||||
| Nanalog | 1.3.6.1.4.1.9839.2606.2.1.2 | ||||||||||||
| SoutputTemperatureTopSensor | 1.3.6.1.4.1.9839.2606.2.1.2.2 | DivBy10 | RO | 285 | |||||||||
scalar · DivBy10 · read-only · current Top sensor output temperature in Celcius
Example values from LibreNMS test devices
| |||||||||||||
| SoutputTemperatureMidSensor | 1.3.6.1.4.1.9839.2606.2.1.2.3 | DivBy10 | RO | 282 | |||||||||
scalar · DivBy10 · read-only · current Mid sensor output temperature in Celcius
Example values from LibreNMS test devices
| |||||||||||||
| SoutputTemperatureBottomSensor | 1.3.6.1.4.1.9839.2606.2.1.2.4 | DivBy10 | RO | 282 | |||||||||
scalar · DivBy10 · read-only · current Bottom sensor output temperature in Celcius
Example values from LibreNMS test devices
| |||||||||||||
| SinputTemperatureTopSensor | 1.3.6.1.4.1.9839.2606.2.1.2.6 | DivBy10 | RO | 302 | |||||||||
scalar · DivBy10 · read-only · current Top sensor input temperature in Celcius
Example values from LibreNMS test devices
| |||||||||||||
| SinputTemperatureMidSensor | 1.3.6.1.4.1.9839.2606.2.1.2.7 | DivBy10 | RO | 321 | |||||||||
scalar · DivBy10 · read-only · current Mid sensor input temperature in Celcius
Example values from LibreNMS test devices
| |||||||||||||
| SinputTemperatureBottomSensor | 1.3.6.1.4.1.9839.2606.2.1.2.8 | DivBy10 | RO | 316 | |||||||||
scalar · DivBy10 · read-only · current Bottom sensor input temperature in Celcius
Example values from LibreNMS test devices
| |||||||||||||
| ScompressorDischargeTemperature | 1.3.6.1.4.1.9839.2606.2.1.2.9 | DivBy10 | RO | 924 | |||||||||
scalar · DivBy10 · read-only · current Compressor discharge temperature
Example values from LibreNMS test devices
| |||||||||||||
| ScompressorSuctionTemperature | 1.3.6.1.4.1.9839.2606.2.1.2.10 | DivBy10 | RO | 297 | |||||||||
scalar · DivBy10 · read-only · current Compressor suction temperature
Example values from LibreNMS test devices
| |||||||||||||
| ScompressorDischargePressure | 1.3.6.1.4.1.9839.2606.2.1.2.11 | DivBy10 | RO | 229 | |||||||||
scalar · DivBy10 · read-only · current Compressor discharge pressure
Example values from LibreNMS test devices
| |||||||||||||
| ScompressorSuctionPressure | 1.3.6.1.4.1.9839.2606.2.1.2.12 | DivBy10 | RO | 75 | |||||||||
scalar · DivBy10 · read-only · current Compressor suction pressure
Example values from LibreNMS test devices
| |||||||||||||
| SevaporatorTemperature | 1.3.6.1.4.1.9839.2606.2.1.2.13 | DivBy10 | RO | 24 | |||||||||
scalar · DivBy10 · read-only · current Evaporator temperature from Low pressure conversion
Example values from LibreNMS test devices
| |||||||||||||
| ScondensingTemperature | 1.3.6.1.4.1.9839.2606.2.1.2.14 | DivBy10 | RO | 396 | |||||||||
scalar · DivBy10 · read-only · current Condensing temperature from High pressure conversion
Example values from LibreNMS test devices
| |||||||||||||
| SinputTemperatureAverage | 1.3.6.1.4.1.9839.2606.2.1.2.21 | DivBy10 | RO | 313 | |||||||||
scalar · DivBy10 · read-only · current Average input temperature in Celcius
Example values from LibreNMS test devices
| |||||||||||||
| SoutputTemperatureAverage | 1.3.6.1.4.1.9839.2606.2.1.2.22 | DivBy10 | RO | 283 | |||||||||
scalar · DivBy10 · read-only · current Average output temperature in Celcius
Example values from LibreNMS test devices
| |||||||||||||
| ScompressorRotorSpeed | 1.3.6.1.4.1.9839.2606.2.1.2.45 | DivBy10 | RO | 1099 | |||||||||
scalar · DivBy10 · read-only · current Compressor rotor speed
Example values from LibreNMS test devices
| |||||||||||||
| ScompressorMotorCurrent | 1.3.6.1.4.1.9839.2606.2.1.2.46 | DivBy10 | RO | 61 | |||||||||
scalar · DivBy10 · read-only · current Compressor motor current
Example values from LibreNMS test devices
| |||||||||||||
| SlcpSetpoint | 1.3.6.1.4.1.9839.2606.2.1.2.48 | DivBy10 | RW | 210 | |||||||||
scalar · DivBy10 · read-write · current Main LCP setpoint
Example values from LibreNMS test devices
| |||||||||||||
| Ninteger | 1.3.6.1.4.1.9839.2606.2.1.3 | ||||||||||||
| ScompressorRotorSpeedHz | 1.3.6.1.4.1.9839.2606.2.1.3.1 | INTEGER (0..9999) | RO | ||||||||||
scalar · INTEGER (0..9999) · read-only · current Compressor rotor speed in Hz
| |||||||||||||
| SdriverPowerStatus | 1.3.6.1.4.1.9839.2606.2.1.3.2 | INTEGER | RO | stop(1) | |||||||||
scalar · INTEGER · read-only · current Driver power status
stop (1),
run (2),
alarm (3)
Example values from LibreNMS test devices
| |||||||||||||
| ScurrentErrorCode | 1.3.6.1.4.1.9839.2606.2.1.3.3 | INTEGER | RO | OK(0) | |||||||||
scalar · INTEGER · read-only · current Current error code
Example values from LibreNMS test devices
| |||||||||||||
| SdriverTemperature | 1.3.6.1.4.1.9839.2606.2.1.3.4 | DivBy10 | RO | 71 | |||||||||
scalar · DivBy10 · read-only · current Driver Power+ Temperature
Example values from LibreNMS test devices
| |||||||||||||
| SdcBusVoltage | 1.3.6.1.4.1.9839.2606.2.1.3.5 | DivBy10 | RO | 528 | |||||||||
scalar · DivBy10 · read-only · current Power+ DC Voltage
Example values from LibreNMS test devices
| |||||||||||||
| SmotorVoltage | 1.3.6.1.4.1.9839.2606.2.1.3.6 | DivBy10 | RO | 251 | |||||||||
scalar · DivBy10 · read-only · current Motor Voltage
Example values from LibreNMS test devices
| |||||||||||||
| SpowerRequest | 1.3.6.1.4.1.9839.2606.2.1.3.7 | DivBy10 | RO | ||||||||||
scalar · DivBy10 · read-only · current Request of power for inverter after envelop
| |||||||||||||
| SunitOnOff | 1.3.6.1.4.1.9839.2606.2.1.3.13 | INTEGER | RW | on(1) | |||||||||
scalar · INTEGER · read-write · current Unit on/off state off (0), on (1), energy-save (2), auto (3)
Example values from LibreNMS test devices
| |||||||||||||
| SenvelopeZone | 1.3.6.1.4.1.9839.2606.2.1.3.14 | INTEGER | RO | maximum-compression-ratio(1) | |||||||||
scalar · INTEGER · read-only · current envelope zone
ok (0),
maximum compression ratio (1),
maximum discharge power (2),
current limit (3),
maximum suction power(4),
minimum compression ratio (5),
minimum delta power (6),
minimum discharge power(7),
minimum suction power (8)
Example values from LibreNMS test devices
| |||||||||||||
| ScoolingCapacity | 1.3.6.1.4.1.9839.2606.2.1.3.16 | INTEGER (0..100) | RO | 84 | |||||||||
scalar · INTEGER (0..100) · read-only · current Actual EVD valve cooling capacity
Example values from LibreNMS test devices
| |||||||||||||
| SevdValveSteps | 1.3.6.1.4.1.9839.2606.2.1.3.17 | INTEGER (0..540) | RO | ||||||||||
scalar · INTEGER (0..540) · read-only · current EVD valve steps position
| |||||||||||||
| SfanSpeedPercent | 1.3.6.1.4.1.9839.2606.2.1.3.28 | INTEGER (0..100) | RO | ||||||||||
scalar · INTEGER (0..100) · read-only · current The fan speed percentage
| |||||||||||||
| SfanSpeedRpm | 1.3.6.1.4.1.9839.2606.2.1.3.29 | INTEGER (0..3700) | RO | 1295 | |||||||||
scalar · INTEGER (0..3700) · read-only · current The fan speed rpm
Example values from LibreNMS test devices
| |||||||||||||
| SevdValveOpening | 1.3.6.1.4.1.9839.2606.2.1.3.30 | INTEGER (0..100) | RO | ||||||||||
scalar · INTEGER (0..100) · read-only · current Actual EVD valve opening
| |||||||||||||
Textual conventions
DivBy10Integer32Display hint:
d-1Fixed point, one decimal