ARICENT-POE-MIB
Future SoftwareThe proprietary MIB module for POE.
snmptranslate -m ARICENT-POE-MIB -Tpsnmpwalk -v2c -c <community> -m ARICENT-POE-MIB <host> 1.3.6.1.4.1.2076.103Imports
| IF-MIB | InterfaceIndex |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ifspoe | 1.3.6.1.4.1.2076.103 | ||||||||||||
identity The proprietary MIB module for POE. | |||||||||||||
| NfsPoeSystem | 1.3.6.1.4.1.2076.103.1 | ||||||||||||
| SfsPoeGlobalAdminStatus | 1.3.6.1.4.1.2076.103.1.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Start or shutdown PoE Module in the system When set as 'start' PoE module initializes data structures and gets the power supply status. When shutdown, all resources used by PoE module will be released back to the system and also power will be shut on all PoE enabled ports
| |||||||||||||
| TfsPoeMacTable | 1.3.6.1.4.1.2076.103.1.2 | NA | |||||||||||
table · not-accessible · current This table contains information associated MAC Addresses for which Power has to be applied. | |||||||||||||
| RfsPoeMacEntry | 1.3.6.1.4.1.2076.103.1.2.1 | NA | |||||||||||
row · not-accessible · current Powered Device(PD)s MAC address, the port through which its been learnt
| |||||||||||||
| CfsPoePdMacAddress | 1.3.6.1.4.1.2076.103.1.2.1.1 | MacAddress | NA | ||||||||||
column · MacAddress · not-accessible · current MAC address of the PD. | |||||||||||||
| CfsPoePdMacPort | 1.3.6.1.4.1.2076.103.1.2.1.2 | InterfaceIndex | RO | ||||||||||
column · InterfaceIndex · read-only · current This object stores the port through which the fsPoePdMacAddress has been learnt | |||||||||||||
| CfsPoePdMacRowStatus | 1.3.6.1.4.1.2076.103.1.2.1.3 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current This object indicates the status of this entry. | |||||||||||||
| TfsPethPsePortTable | 1.3.6.1.4.1.2076.103.1.3 | NA | |||||||||||
table · not-accessible · current A table of objects that display and control non-standard power characteristics of power Ethernet ports on a Power Source Entity (PSE) device. This group will be implemented in managed power Ethernet switches and mid-span devices. Values of all read-write objects in this table are persistent at restart/reboot. | |||||||||||||
| RfsPethPsePortEntry | 1.3.6.1.4.1.2076.103.1.3.1 | NA | |||||||||||
row · not-accessible · current A set of objects that display and control non-standard power characteristics of a power Ethernet PSE port. | |||||||||||||
| CfsPethPsePortGroupIndex | 1.3.6.1.4.1.2076.103.1.3.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. | |||||||||||||
| CfsPethPsePortIndex | 1.3.6.1.4.1.2076.103.1.3.1.2 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current This variable uniquely identifies the power Ethernet PSE port within group fsPethPsePortGroupIndex to which the power Ethernet PSE entry is connected. | |||||||||||||
| CfsPethPsPortPowerMeasurementsAmperage | 1.3.6.1.4.1.2076.103.1.3.1.3 | Integer32 (1..2147483647) | RO | 0 | |||||||||
| CfsPethPsPortPowerMeasurementsVoltage | 1.3.6.1.4.1.2076.103.1.3.1.4 | Integer32 (1..2147483647) | RO | 0 | |||||||||
| CfsPethPsPortPowerMeasurementsWattage | 1.3.6.1.4.1.2076.103.1.3.1.5 | Integer32 (1..2147483647) | RO | 0 | |||||||||
| CfsPethPsPortPowerPriorityStatic | 1.3.6.1.4.1.2076.103.1.3.1.6 | INTEGER | RO | low(3) | |||||||||
column · INTEGER · read-only · current This object controls the priority of the port from the point of view of a power management algorithm. The priority that is set by this variable could be used by a control mechanism that prevents over current situations by disconnecting first ports with lower power priority. Ports that connect devices critical to the operation of the network - like the E911 telephones ports - should be set to higher priority. This object represents the static Port Power Priority value. When the standard pethPsePortPowerPriority value is different than the value of this object, a dynamic setting is currently applied.
Example values from LibreNMS test devices
| |||||||||||||
| CfsPethPsPortPowerMode | 1.3.6.1.4.1.2076.103.1.3.1.7 | INTEGER | RW | std802d3(1) | |||||||||
column · INTEGER · read-write · current This object controls the power mode configured by the user. It is port dependant, based on the capabilities of the port. 802d3 is standards based PoE, passive-24v is 24V passive PoE (no detection, no classification), passive-54v is 54V passive PoE (no detection, no classification), force is 54V passive PoE (with detection, no classification).
Example values from LibreNMS test devices
| |||||||||||||
| CfsPethPsPortPowerModeDynamic | 1.3.6.1.4.1.2076.103.1.3.1.8 | INTEGER | RO | nonDynamic(0) | |||||||||
column · INTEGER · read-only · current This objects informs if a power mode has been dynamically changed on a port via the auto-detect mechanism.
Example values from LibreNMS test devices
| |||||||||||||
| SfsPowerModeAutoDetect | 1.3.6.1.4.1.2076.103.1.4 | Bits | RW | ||||||||||
scalar · Bits · read-write · current This setting enables auto-detection of certain devices via LLDP and applies a specific power-mode for them. For cnMedusa we will automatically change power-mode to force-power. This is possible becuase cnMedusa/cnWave boots in 802d3 mode, but then it requires force-mode to function properly. The 802d3 boot-up mode allows it to transmit the LLDP TLV by which it is recognised as a cnMedusa/cnWave. Depending on the device, this setting will only apply on corresponding capable ports
| |||||||||||||
| SfsPowerModePassiveSafe | 1.3.6.1.4.1.2076.103.1.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This setting enables PoE passive-safe mode, which offers a certain degree of protection against accidental insertion of non-compatible devices in ports already configured in a passive PoE mode (passive-low or passive-high). Passive modes can damage certain devices since it automatically puts voltage out on the port, w/o any sort of 802.3 detection.
| |||||||||||||
| SfsPowerModeHighTemperature | 1.3.6.1.4.1.2076.103.1.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This setting enables high temperature mode, which offers the posibility to reduce the PoE budget to a predetermined value when the switch is running in a high temperature environment.
| |||||||||||||
| SfsPowerFirmwareVersion | 1.3.6.1.4.1.2076.103.1.7 | DisplayString (SIZE (0..127)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..127)) · read-only · current Specifies the PoE MCU firmware version | |||||||||||||
| SfsPowerModeDCinVoltageRange | 1.3.6.1.4.1.2076.103.1.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This setting allows the user to specifiy in which range the DC input voltage is located so that the PoE power budget can be accordingly adjusted. Currently, only necessary and available on the TX1012-P-DC
| |||||||||||||