ARICENT-CFA-MIB
Future SoftwareThe MIB module for CFA.
snmptranslate -m ARICENT-CFA-MIB -Tpsnmpwalk -v2c -c <community> -m ARICENT-CFA-MIB <host> 1.3.6.1.4.1.2076.27Imports
| IF-MIB | InterfaceIndex, ifEntry, ifIndex, ifType |
|---|---|
| Q-BRIDGE-MIB | PortList, VlanId |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso, private |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, StorageType, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ifscfa | 1.3.6.1.4.1.2076.27 | ||||||||||||||||||||
identity The MIB module for CFA. | |||||||||||||||||||||
| Nif | 1.3.6.1.4.1.2076.27.1 | ||||||||||||||||||||
| SifMaxInterfaces | 1.3.6.1.4.1.2076.27.1.1 | InterfaceIndex | RW | deprecated | 198 | ||||||||||||||||
scalar · InterfaceIndex · read-write · deprecated Specifies the maximum number of interfaces that can be present in the system. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SifMaxPhysInterfaces | 1.3.6.1.4.1.2076.27.1.2 | InterfaceIndex | RW | deprecated | 12 | ||||||||||||||||
scalar · InterfaceIndex · read-write · deprecated Specifies the maximum number of physical interfaces that can be present in the system. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SifAvailableIndex | 1.3.6.1.4.1.2076.27.1.3 | InterfaceIndex | RO | 11 | |||||||||||||||||
scalar · InterfaceIndex · read-only · current Shows an ifIndex which is available for creation of any new virtual (non-physical) interface in the system. This ifIndex value can be used for creation of interfaces in the ifMainTable or any media-specif MIB. For creation of physical interfaces, any free ifIndex between 1 and ifMaxPhysInterfaces can be used. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TifMainTable | 1.3.6.1.4.1.2076.27.1.4 | NA | |||||||||||||||||||
table · not-accessible · current A list of all the interface entries in the system. This table contains objects which are applicable to all types of interfaces in the system. This table is a proprietary extension to the standard ifTable and ifXTable. The index to this table has the semantics of the MIB-2 ifIndex. | |||||||||||||||||||||
| RifMainEntry | 1.3.6.1.4.1.2076.27.1.4.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing management information applicable to a particular interface.
| |||||||||||||||||||||
| CifMainIndex | 1.3.6.1.4.1.2076.27.1.4.1.1 | InterfaceIndex | RO | ||||||||||||||||||
column · InterfaceIndex · read-only · current A unique value, greater than zero, for each interface. This object is identical to the ifIndex of the standard MIB-2 ifTable. | |||||||||||||||||||||
| CifMainType | 1.3.6.1.4.1.2076.27.1.4.1.2 | INTEGER | RC | ethernetCsmacd(6) | |||||||||||||||||
column · INTEGER · read-create · current The type/protocol of interface. Specification of
the object is mandatory for all interfaces. This
value should be specified after the row creation
in the ifMainTable and before setting any other
object in this table. Once the type is specified,
it cannot be changed - the interface should be
deleted for changing the type of the interface.
The ethernetCsmacd(6), iso88025TokenRing(9), aal5(49),
async(84) and hdlc(118) are physical interfaces while
all other types are virtual or logical interfaces.
Specific ifIndex ranges are reserved for different interface types.
Creation of different types of interfaces is possible only within
their corresponding ifIndex range. So the ifMainType should be
configured corresponding to the ifIndex range reserved for that
particular interface type.
For creation of physical interface types, it is mandatory to
specify the handle to the device driver using the ifAlias
object of the standard ifXTable before specifying the type.
This handle could be something like eth1 or /dev/abcd.
pip interface type will be used vritual Provider Instance port in
PBB bridge mode. physical PIPs can be created using ethernetCsmacd .
Following is the mapping of different port types and there ifmaintype values.
External ports
--------------
Port: ifmaintype Port type
-------------------------------------------------------------------
CNP- Ctagged 6 - customerNetworkPortCtagged (9)
CNP - Port based 6 - customerNetworkPortPortBased (2)
CNP- Stagged 6 - customerNetworkPortStagged (3)
PNP 6 - providerNetworkPort (1)
PIP 6 - providerInstancePort (11)
CBP 6 - customerBackbonePort (12)
UAP 6 - uplinkAccessPort (13)
Internal ports
--------------
VIP 209 - virtualInstancePort (10)
PIP 248 - providerInstancePort (11)
CBP 209 - customerBackbonePort (12)
SBP 209 - stationFacingBridgePort (14)
brgPort will be used to create virtual PBB ports other than PIPs.
(ie) brgPort is used to create logical ports VIPs, CBPs and SBPs.
The propVirtual type denotes properietary logical interfaces. These
type of interfaces can be associated with a {physical interface,
switch instance} for the purpose of sharing the physical interface
to more than one context and thus realising Switch Instance Sharing
of a physical interface.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifMainMtu | 1.3.6.1.4.1.2076.27.1.4.1.3 | Integer32 | RC | 1500 | |||||||||||||||||
column · Integer32 · read-create · current The MTU for the interface as shown to the higher interface sub-layer (this value should not include the encapsulation or header added by the interface). If IP is operating over the interface, then this value indicates the IP MTU over this interface. For changing the MTU of any interface, the interface must be brought down first - changing MTU while the interface is administratively up is not permitted. If not specified during interface creation, a default value is assigned based on the ifMainType given to the particular interface. While configuring for logical VLAN interfaces, care should be taken to, configure this value as the lowest of the MTU values of the member ports. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifMainAdminStatus | 1.3.6.1.4.1.2076.27.1.4.1.4 | INTEGER | RC | up(1) | |||||||||||||||||
column · INTEGER · read-create · current The desired state of the interface. This object can be set only when the ifMainRowStatus of the interface is active. This object has the semantics of the ifAdminStatus of the standard ifTable. The testing(3) state indicates that no operational packets can be passed - this state is not currently supported. When a managed system initializes, all interfaces start with ifMainAdminStatus in the down(2) state, it's a default state also. As a result of either explicit management action or per configuration information retained by the managed system, ifMainAdminStatus is then changed to the up (1) state (or remains in the down(2) state).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifMainOperStatus | 1.3.6.1.4.1.2076.27.1.4.1.5 | INTEGER | RO | up(1) | |||||||||||||||||
column · INTEGER · read-only · current The current operational state of the interface. The testing (3) state indicates that no operational packets can be passed - this state is not supported currently. If ifMainAdminStatus is down (2) then ifMainOperStatus would be down (2). If ifMainAdminStatus is changed to up (1) then ifMainOperStatus should change to up (1) if the interface is ready to transmit and receive work traffic; it should change to dormant (5) the interface is waiting for external actions (such as a serial line waiting for an incoming connection); it should change to lowerLayerDown(7) state if it cannot be made up as the interface sub-layer below it is down; it should remain in the down (2) state if and only if there is a fault that prevents it from going to the up (1) state; it should remain in the notPresent (6) state if the interface has missing (typically, hardware) components. The status unknown(4) is shown when it is not possible to determine the exact status of the interface - e.g. the interface sub-layer is performing negotiations - during this period the interface is not up but at the same time, it is not a fault condition and hence it cannot be shown as down - in such periods the status is shown as unknown. This object has the semantics of the ifOperStatus of the standard ifTable.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifMainEncapType | 1.3.6.1.4.1.2076.27.1.4.1.6 | INTEGER | RW | ethernetV2(8) | |||||||||||||||||
column · INTEGER · read-write · current The encapsulation type to be used over the interface. For Ethernet interfaces, the default encapsulation type is ethernetV2(8). The other possible encapsulation is llcSnap(6). If other(1) is specified then an automatic encapsulation type learning method is used in ARP for determining the encapsulation for unicast destinations while the multicast and broadcast destinations use ethernetV2(8). For PPP and MLPPP interfaces, the encapsulation type can only be other(1) and this is the default value. For FR VCs, the value can be nlpid(2) (for carrying protocols which have NLPID) or nlpidSnap(3) (for other protocols). The default is nlpid(2) and the types of protocols supported are inferred from the stack-layering implemented over the interface. For X.25 VCs, the value can be nlpid(2) or nlpidSnap(3) (where the VC can carry multiplexed protocol traffic with each data packet containing the NLPID or SNAP header) or cudNlpid(4) or cudNlpidSnap(5) (where the CUD specifies the NLPID of the protocol or SNAP and the data packets do not contain these headers - for dedicated VCs). The default is cudNlpid(4). For ATM VCs, the default is llcSnap(6) but the vcMultiplexed(7) encapsulation is also supported. This object is not applicable to other interfaces.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifMainBrgPortType | 1.3.6.1.4.1.2076.27.1.4.1.7 | INTEGER | RW | customerBridgePort(8) | |||||||||||||||||
column · INTEGER · read-write · current The Bridge port type of this specified switch port.
Bridge Port type can be specified only for switch ports and not for
router ports, IVR interfaces and I-LAN Interfaces.
providerNetworkPort - Port Connected to a single Provider.
SVLAN Classification is based on only the PVID configured for the
port for untagged packets.
customerNetworkPortPortBased - Port in the S-VLAN component that
can transmit or received frames for single customer.
All packets received on this port, are mapped to one single service
instance identified by the PVID of that Port.
Acceptable Port Type will be always Admit only Untagged or Priority
Tagged Frames on this port.
customerNetworkPortStagged - Port in the S-VLAN component that
can transmit or received frames for single customer.
VLAN classification on this interface will be based on the S-tag
received or on the PVID of the port. Ingress Filtering will be
always enabled on this port.
customerEdgePort - Port in a Provider Edge Bridge connected to a
single customer. Multiple services can be provide on this port.
The Packets received on this interface will be first classified
to a CVLAN. CVLAN classification can be based on the Vid
in the C-Tag present in the packet (if it C-tagged packet) or from
the pvid of the port. Service instance selection (S-VLAN selection)
for a frame is done based on the entry present in the C-VID
registration table for the pair (C-VID, reception Port).
CustomerEdgePort configuration is allowed only in Provider Edge
Bridges.
propCustomerEdgePort - Port connected to a single customer, where
multiple services can be provided based on only Proprietary SVLAN
classification tables. S-VLAN classification will not happen based on
C-VID registration table on this port. propCustomerEdgePort
configuration is allowed only in Provider Edge Bridges.
propCustomerNetworkPort - Port connected to a single customer, where
multiple service can be provided based on CVLANs by assigning one of
the Proprietary SVLAN classification tables to this port. The
services can also be assigned using other proprietary SVLAN
classification tables where CVLAN is not the index of the table.
propProviderNetworkPort - Port connected to a Q-in-Q Bridge located
inside Provider Network. This port is part of S-VLAN component.
If packets to be tagged and sent out of this port will have 0x8100
as the ether type. Similarly pakcets with standard Q tag (ether type
as 0x8100) received will be considered as S-Tagged packets.
customerBridgePort - Type of the port to be used in customer
bridges as well in Provider(Q-in-Q) bridges. This type is not valid
in Provider Core bridges as well as Provider Edge bridge.
customerNetworkPortCtagged - Port in the I component that
can transmit or received frames for single customer.
VLAN classification on this interface will be based on the C-tag
received or on the default CVID of the port. Ingress Filtering will be
always enabled on this port.
virtualInstancePort - A Bridge Port on an I-component in a Backbone Edge Bridge
that provides access to a single backbone service instance.
providerInstancePort - The set of Virtual Instance Ports that are supported
by a single instance of the ISS.
customerBackbonePort - A Backbone Edge Bridge Port that can receive and transmit
I-tagged frames for multiple customers, and assign B-VIDs and translate I-SID on
the basis of the received I-SID.
Edge Virtual Briding (EVB) technology is used in Data Center Networks.
The uplinkAccessPort (UAP) and stationFacingBridgePort (SBP) types are
applicable when the bridge operates in EVB environment.
uplinkAccessPort - A port on a Port-mapping S-VLAN component that
connects an EVB Bridge with an EVB Station.
stationFacingBridgePort - A port that is part of the C-VLAN component of
EVB Bridge which has one-to-one relationship with a S-Channel Access Port
in the port-mapping S-VLAN component.
In Customer bridges and in Provider Bridges only customerPort option
is allowed.
In Provider backbone bridge only customerNetworkPort, providerNetworkPort
and customerBackbonePort type of ports are allowed.
Bridge Port Type cannot be set for a port-channel port, if some
physical ports are aggregated in it.
Also Bridge Port type cannot be set for a port, if part of a
port-channel.
Whenever the Bridge port type changes, the previous configuration
associated with the port will be flushed.
For example.
whenever CNP(STagged) and PNP port types are changed to any
other port type,
- The unicast entries learnt on this port and
- The VID translation table entries associated with the port
will be flushed.
Whenever CEP port type is changed to any other port type,
- The unicast entries learnt on this port
- The C-VID registration table entries associated with the port
- The PEP configuration table entries
- The service priority regeneration table entries
will be flushed.
Even the vlan membership of the port will be removed when the
Pbport type is changed.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifMainRowStatus | 1.3.6.1.4.1.2076.27.1.4.1.8 | RowStatus | RC | 1 | |||||||||||||||||
column · RowStatus · read-create · current A RowStatus variable for addition, deletion and in-activation of the interfaces. Specification of the object is mandatory for all interfaces. When the status is active, the interface is created and ready to use in the respective protocol modules. When the status is notInService, the interface has not been registered with the respective protocol modules and as such those modules are not aware of the existence of the interface - creation is hence, incomplete. Setting an active interface to notInService results in de-registration/deletion of the interface from the respective protocol modules and all the configurations associated with that interface in those modules may be lost. Deletion of an interface, may affect the status of other interfaces which are layered above or below it in the Interface Stack (ifStackTable) and may result in other interfaces being made notReady or notInService. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifMainSubType | 1.3.6.1.4.1.2076.27.1.4.1.9 | INTEGER | RW | gigabitEthernet(253) | |||||||||||||||||
column · INTEGER · read-write · current This object stores the subType value of the specified interface. Configuration of this object is not mandatory.By default Sub type value will be updated based on the hardware link speed. For non Ethernet interfaces, the object defaults to notApplicable. notApplicable is valid only for non Ethernet interfaces.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifMainNetworkType | 1.3.6.1.4.1.2076.27.1.4.1.10 | INTEGER | RW | lan(1) | |||||||||||||||||
column · INTEGER · read-write · current This object indicates whether this interface is a WAN or LAN link. The default value for this object varies according to the interface type. All interfaces of type radio (71), ieee8023ad (161) and l3ipvlan (136) are LAN interfaces. Fast ethernet interfaces are considered LAN interfaces while Gigabit ethernet interfaces are considered WAN interfaces at start-up. Interfaces of any other type are WAN interfaces. This object can be set only for ethernet interfaces or l3ipvlan. For changing the network type of an ethernet interface or l3ipvlan, the interface must be brought down first - changing network type while the interface is administratively up is not permitted.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifMainWanType | 1.3.6.1.4.1.2076.27.1.4.1.11 | INTEGER | RW | other(0) | |||||||||||||||||
column · INTEGER · read-write · current This object indicates whether this interface is a private or public WAN link. This object is applicable only for PPP interfaces and ethernet WAN interfaces. For other interfaces the value cannot be set and a get always returns the value OTHER. For PPP and ethernet WAN interfaces the default value is PUBLIC. By default, public WAN links, have a default route associated with them. When the WAN type is set as PRIVATE, no default route is created for this interface. The value OTHER can never be set. For changing the type of a WAN interface, the interface must be brought down first - changing WAN type while the interface is administratively up is not permitted.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifMainDesc | 1.3.6.1.4.1.2076.27.1.4.1.12 | DisplayString | RW | | |||||||||||||||||
| CifMainStorageType | 1.3.6.1.4.1.2076.27.1.4.1.13 | StorageType | RC | 3 | |||||||||||||||||
column · StorageType · read-create · current The storage type for this conceptual row in the ifMainTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar object in the row. only volatile and nonVolatile are allowed for this object Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifMainExtSubType | 1.3.6.1.4.1.2076.27.1.4.1.14 | INTEGER | RW | 253 | |||||||||||||||||
column · INTEGER · read-write · current This object stores the subType value of the specified interface. These sub types are specified for the ifMainType-propVirtual.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifMainPortRole | 1.3.6.1.4.1.2076.27.1.4.1.15 | INTEGER | RW | downlink(2) | |||||||||||||||||
column · INTEGER · read-write · current This object is for indicating the port role for each interface. A port is termed as uplink port when it is connected to the network. A port is termed as downlink when it is connected towards host end-points
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifMainUfdOperStatus | 1.3.6.1.4.1.2076.27.1.4.1.16 | INTEGER | RO | up(1) | |||||||||||||||||
column · INTEGER · read-only · current This object is for indicating the Uplink Failure Detection(UFD) port operational status for each interface. Uplink Failure Detection(UFD) operational status of the uplink port is same as the operational status of the port. For the downlink ports this object takes a value which is dependent on the combined operational status of the uplink ports present in the group to which this port belongs to. If all the uplink ports in the Uplink Failure Detection(UFD) group are down, the operational status of all the active downlink ports is ufdErrorDisabled and the operational status of all the inactive downlink ports is Down. When the interface is not in the group and it's ifMainOperStatus is up, the interface Uplink Failure Detection(UFD) operational status is up. When the interface is not in the group and it's ifMainOperStatus is not up, the port Uplink Failure Detection(UFD) operational status is down.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifMainUfdGroupId | 1.3.6.1.4.1.2076.27.1.4.1.17 | Integer32 (0..65535) | RW | 0 | |||||||||||||||||
column · Integer32 (0..65535) · read-write · current An identifier that uniquely identifies the group. Each group has uplink interfaces to monitor and downlink interfaces to disable. The UFD group Id value zero indicates that the port is not present in any group. By setting the UFD Group Id value to zero, we are deleting the port from the ufd group to which it belongs to. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifMainUfdDownlinkDisabledCount | 1.3.6.1.4.1.2076.27.1.4.1.18 | Counter32 | RO | deprecated | 0 | ||||||||||||||||
column · Counter32 · read-only · deprecated A counter which indicates the number of times that downlink ports in the group were automatically disabled because of all uplink ports failure in the group. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifMainUfdDownlinkEnabledCount | 1.3.6.1.4.1.2076.27.1.4.1.19 | Counter32 | RO | deprecated | 0 | ||||||||||||||||
column · Counter32 · read-only · deprecated A counter which indicates the number of times that downlink ports in the group were automatically enabled because of any one uplink ports back to function in the group. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifMainDesigUplinkStatus | 1.3.6.1.4.1.2076.27.1.4.1.20 | TruthValue | RW | 0 | |||||||||||||||||
column · TruthValue · read-write · current This object specifies whether this interface is designated uplink or not. A port is termed as designated uplink when the port is connected to the network and it has more preference over all the uplink ports. Broadcast/unknown multicast will use this designated port to reach uplink. When the status is set to True, the port acts as designated uplink. This designated uplink port is used in split horizon feature. This object is different from the Uplink Failure Detection (UFD) designated uplink port object called ifUfdGroupDesigUplinkPort. Where ifUfdGroupDesigUplinkPort is unique per UFD group and in each group the designated uplink port differs in UFD whereas this object is specific for all the available physical interfaces. This configuration is allowed only on uplink port which is configured through ifMainPortRole. Configuring any uplink port as designated uplink port overrides the previous designated uplink port configuration since it is allowed to have only one designated uplink port in the system. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifMainEncapDot1qVlanId | 1.3.6.1.4.1.2076.27.1.4.1.21 | Integer32 (0..4094) | RW | ||||||||||||||||||
column · Integer32 (0..4094) · read-write · current This object specifies the VLAN identifier assigned to Layer 3 Subinterface for association in the porting layer. This object is available only when the interface is set as Layer3 SubInterface. | |||||||||||||||||||||
| CifMainNeighborId | 1.3.6.1.4.1.2076.27.1.4.1.22 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-only · current A string identifying the device connected to the interface. The neighbor ID is derived from LLDP data that is currently associated with the interface. | |||||||||||||||||||||
| CifMainName | 1.3.6.1.4.1.2076.27.1.4.1.23 | SnmpAdminString (SIZE (0..32)) | RO | ||||||||||||||||||
column · SnmpAdminString (SIZE (0..32)) · read-only · current A string identifying the device interface that can be used to unambiguously identify the interface when configuring interface settings in various tables that identify ports by name. | |||||||||||||||||||||
| CifMainPrevDesc | 1.3.6.1.4.1.2076.27.1.4.1.24 | DisplayString (SIZE (0..255)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current A textual string which contains the previous description for the interface. | |||||||||||||||||||||
| TifIpTable | 1.3.6.1.4.1.2076.27.1.5 | NA | |||||||||||||||||||
table · not-accessible · current A list of all the interface entries in the system which are registered with IP. This table contains objects which are applicable for the management of IP over the network interfaces in the system. This table is a extension to the ifMainTable. The index to this table has the semantics of the ifMainIndex of the ifMainTable. Entries are created automatically in this table for any interface sub-layer which is layer below IP using the ifStackTable. Similarly, entries are deleted from this table when the interface's layering below IP is removed. | |||||||||||||||||||||
| RifIpEntry | 1.3.6.1.4.1.2076.27.1.5.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing management information applicable to a particular interface over which IP is operating.
| |||||||||||||||||||||
| CifIpAddrAllocMethod | 1.3.6.1.4.1.2076.27.1.5.1.1 | INTEGER | RW | manual(1) | |||||||||||||||||
column · INTEGER · read-write · current The mechanism to be used for allocation of IP address for this interface. The value negotiation can be used only for PPP and MLPPP interfaces which support obtaining of IP addresses through negotiation. The dynamic(3) option takes an IP address dynamically from the available server (dhcp/bootp/rarp) according to the protocol specified in ifIpAddrAllocProtocol. If the method specified is manual and the IP address is not provided (then the interface would be treated as a un-numbered interface.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifIpAddr | 1.3.6.1.4.1.2076.27.1.5.1.2 | IpAddress | RW | 10.250.0.110 | |||||||||||||||||
column · IpAddress · read-write · current Specifies the IP address given to this interface. The specification of this object is mandatory for all network interfaces (Ethernet, FR VC, IPoA interface, PPP link - not under MP, MP interface and X.25 VC). If the interface is not a network interface then the default value of 0.0.0.0 is assigned and the interface is treated as a un-numbered interface by IP. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifIpSubnetMask | 1.3.6.1.4.1.2076.27.1.5.1.3 | IpAddress | RW | 255.255.255.0 | |||||||||||||||||
column · IpAddress · read-write · current Specifies the IP Subnet Mask for this interface. The value should be specified only for network interfaces and any valid VLSM is accepted. If not specified, this object takes the default subnet mask value based on the class of the IP address configured for the interface. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifIpBroadcastAddr | 1.3.6.1.4.1.2076.27.1.5.1.4 | IpAddress | RW | 10.250.0.255 | |||||||||||||||||
column · IpAddress · read-write · current Specifies the IP broadcast address for this interface. The value should be specified only for network interfaces and any valid broadcast address based on a valid VLSM is accepted. If not specified, this object takes the default value based on the class of the IP address configured for the interface. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifIpForwardingEnable | 1.3.6.1.4.1.2076.27.1.5.1.5 | TruthValue | RW | 1 | |||||||||||||||||
column · TruthValue · read-write · current Specifies whether IP forwarding is enable on this interface. Disabling IP forwarding on an interface will result in packets which are to be forwarded on that interface being dropped and ICMP error messages being generated for the packets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifIpAddrAllocProtocol | 1.3.6.1.4.1.2076.27.1.5.1.6 | INTEGER | RW | dhcp(2) | |||||||||||||||||
column · INTEGER · read-write · current Specifies the protocol to be used to obtain
IP address for this interface. This object is
valid only when ifIpAddrAllocMethod is set to
dynamic (3).
When ifIpAddrAllocMethod option is dhcp(2)
dhcp-client tries for dynamic IP address from
server for maximum number of retries. If couldn't
able to receive any IP address, then sets back to
default IP address.
Currently rarp (1) option is not
supported. The assigned value will be effective
only when the interface admin status changes
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifIpDestMacAddress | 1.3.6.1.4.1.2076.27.1.5.1.7 | MacAddress | RC | 00:00:00:00:00:00 | |||||||||||||||||
column · MacAddress · read-create · current The unicast Peer MacAddress for unnumbered interface. This Object needs to be configured mandatorily for proper forwarding of IP packets over unnumbered interfaces.This object needs to be set to avoid ARP resolution failure on corresponding interfaces. For MPLS-TP networks, MacAddress can be unicast or multicast (01:00:5E:90:00:00) Mac Address. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifIpUnnumAssocIPIf | 1.3.6.1.4.1.2076.27.1.5.1.8 | InterfaceIndex | RC | 0 | |||||||||||||||||
column · InterfaceIndex · read-create · current This object stores the interface index of the interface associated with the unnumbered interface. The source IP addresses used over the Unnumbered interface in relation to the destination IP address are borrowed from the associated interface. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifIpIntfStatsEnable | 1.3.6.1.4.1.2076.27.1.5.1.9 | TruthValue | RW | 2 | |||||||||||||||||
column · TruthValue · read-write · current This object specifies whether statistics collection is enabled on the IP interface. When the status is set to True, statistics collection will be started on the IP interface. Retrieval of statistics on the L3 interface is possible only when the status is set to True. When the status is set to False, statistics collection will be stopped on the IP interface. Retrieval of statistics on the L3 interface is not be possible when the status is set to False. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifIpPortVlanId | 1.3.6.1.4.1.2076.27.1.5.1.10 | Integer32 (0..4094) | RW | 0 | |||||||||||||||||
column · Integer32 (0..4094) · read-write · current This object specifies the VLAN identifier assigned to router-ports for association in the porting layer. This object is meant for the chipsets when the porting layer demands VLAN identifier association to realize router ports. This object is available only when the physical interface is set as router-port. The default value 0 is applicable for L3 VLAN interfaces and for chipsets that do not support this MIB feature Example values from LibreNMS test devices
| |||||||||||||||||||||
| TifWanTable | 1.3.6.1.4.1.2076.27.1.6 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated A list of all the WAN interfaces in the system. This table contains objects which are applicable for the management of WAN interfaces like PPP, MP bundle and FR/X.25/ATM VCs in the system. This table is a extension to the ifMainTable. The index to this table has the semantics of the ifMainIndex of the ifMainTable. Entries are created automatically in this table when any WAN interface is created in the ifMainTable. The ppp(23), miox25(38), frameRelayMPI(92), pppMultilinkBundle(108) and atmSubInterface(134) interfaces have entries in this table. The entries in this table are deleted when the interfaces are deleted from the ifMainTable. | |||||||||||||||||||||
| RifWanEntry | 1.3.6.1.4.1.2076.27.1.6.1 | NA | deprecated | ||||||||||||||||||
row · not-accessible · deprecated An entry containing management information applicable to a WAN interface.
| |||||||||||||||||||||
| CifWanInterfaceType | 1.3.6.1.4.1.2076.27.1.6.1.1 | INTEGER | RO | deprecated | |||||||||||||||||
column · INTEGER · read-only · deprecated The type of the WAN interface. This is same as if MIB-2 ifType and ifMainType.
| |||||||||||||||||||||
| CifWanConnectionType | 1.3.6.1.4.1.2076.27.1.6.1.2 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated The type of WAN connection. This object will not be applicable to PPP and MLPPP interfaces and will have the value other(0). For all other interfaces the default value is permanent(1). It is possible to pre-configure a SVC through this table. The actual SVC establishment may take place when there is data to be sent or through some other system policy.
| |||||||||||||||||||||
| CifWanVirtualPathId | 1.3.6.1.4.1.2076.27.1.6.1.3 | Integer32 | RW | deprecated | |||||||||||||||||
column · Integer32 · read-write · deprecated The VPI for ATM VCs. This object will not be applicable to other interfaces and will have the value 0. | |||||||||||||||||||||
| CifWanVirtualCircuitId | 1.3.6.1.4.1.2076.27.1.6.1.4 | Integer32 | RW | deprecated | |||||||||||||||||
column · Integer32 · read-write · deprecated The VCI for ATM VCs, DLCI for Frame Relay VCs and the channel identifier for X.25 VCs. For SVCs this object is read-only, the value will be assigned after the SVC establishment. This object will not be applicable to PPP and MLPPP interfaces and will have the value 0. | |||||||||||||||||||||
| CifWanPeerMediaAddress | 1.3.6.1.4.1.2076.27.1.6.1.5 | OCTET STRING (SIZE (0..40)) | RW | deprecated | |||||||||||||||||
column · OCTET STRING (SIZE (0..40)) · read-write · deprecated The Media Address of the peer to whom this connection is to be established. For ATM VCs this can be in E.164, NSAP or either of these along with the subaddress. For Frame Relay VCs this is in E.164 and for X.25 VCs it is in X.121 format. For SVCs this object is mandatory, for PVCs it is optional. This object will not be applicable to PPP and MLPPP interfaces and will have the value 0. | |||||||||||||||||||||
| CifWanSustainedSpeed | 1.3.6.1.4.1.2076.27.1.6.1.6 | Integer32 | RW | deprecated | |||||||||||||||||
column · Integer32 · read-write · deprecated The sustained or minimum gauranteed speed of the interface. This is semantically similar to the CIR for FR and SCR for ATM. The value to be assigned is the CIR or SCR as the case may be. This value is used by IP-QoS. For PPP links this object should be given the value of the speed of the lower link. For MP this value is the sum of the speed of all the lower PPP links. If the value is not specified then the system default values are taken based on the type of the interface. | |||||||||||||||||||||
| CifWanPeakSpeed | 1.3.6.1.4.1.2076.27.1.6.1.7 | Integer32 | RW | deprecated | |||||||||||||||||
column · Integer32 · read-write · deprecated The maximum speed available on the interface. This is semantically similar to the CIR+EIR for FR and PCR for ATM. This value is used by IP-QoS. For PPP links this object should be given the value of the speed of the lower link. For MP this value is the sum of the speed of all the lower PPP links. If the value is not specified then the ifWanSustatinedSpeed values are taken as the peak speed values. | |||||||||||||||||||||
| CifWanMaxBurstSize | 1.3.6.1.4.1.2076.27.1.6.1.8 | Integer32 | RW | deprecated | |||||||||||||||||
column · Integer32 · read-write · deprecated The maximum burst size in bytes that the interface can sustain. This is semantically similar to the Bc for FR and MBS for ATM. This value is used by IP-QoS. For PPP links this object should be given the value of the speed of the lower link. For MP this value is the sum of the speed of all the lower PPP links. If the value is not specified then the system default values are taken based on the type of interface. | |||||||||||||||||||||
| CifWanIpQosProfileIndex | 1.3.6.1.4.1.2076.27.1.6.1.9 | Integer32 | RW | deprecated | |||||||||||||||||
column · Integer32 · read-write · deprecated The index of an IP-QoS profile which is configured in the IP-QoS MIB. Assigning the index of the profile results in instantiation of that profile for the interface. This object is optional and may be specified only for assigning an IP-QoS profile - if not specified then no profile is applied to this interface - default value is then the invalid index 0. | |||||||||||||||||||||
| CifWanIdleTimeout | 1.3.6.1.4.1.2076.27.1.6.1.10 | Integer32 | RW | deprecated | |||||||||||||||||
column · Integer32 · read-write · deprecated The minimum duration (in seconds) to wait before disconnecting an idle established circuit/interface. (a default value of 0 where not required) Specification of the object is optional for all interfaces; if not specified the system default value is assumed on the basis of the IfType specified. | |||||||||||||||||||||
| CifWanPeerIpAddr | 1.3.6.1.4.1.2076.27.1.6.1.11 | IpAddress | RW | deprecated | |||||||||||||||||
column · IpAddress · read-write · deprecated The IP address of the peer to whom this interface is established with. Specification of this value is optional for all interfaces. For PPP and MLPPP interfaces, this value if specified is used during IPCP negotiation for assigning IP address to the peer. This object stores the configured peer IP address and this object is not updated with the actual IP address of the peer. For other interfaces, this value is either configured for peers who do not have InARP support or this object is instantiated after the peer IP address is obtained after InARP. | |||||||||||||||||||||
| CifWanRtpHdrComprEnable | 1.3.6.1.4.1.2076.27.1.6.1.12 | TruthValue | RW | deprecated | |||||||||||||||||
column · TruthValue · read-write · deprecated Enable or disable the RTP header compression on the WAN interface. This object is writable for only those interface which are registered with IP. If the RTP header compression negotiation with the peer fails then this object is reset to false. | |||||||||||||||||||||
| CifWanPersistence | 1.3.6.1.4.1.2076.27.1.6.1.13 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated The persistence of the WAN interface in the system. Demand(2) circuits are pre-configured but are opened only when there is some data to be sent (these interfaces are administratively UP, but operationally DORMANT and they are made UP dynamically whenever there is any data to be sent over the interface). The demand circuit configuration continues to persist in the system. Alll other WAN interface which do not fall under the above categories are to be configured as other(1) which is the default value.
| |||||||||||||||||||||
| TifAutoCktProfileTable | 1.3.6.1.4.1.2076.27.1.7 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated A list of all the automatic circuit profiles in the system. This table contains objects which are useful for configuration of an automatic circuit profile for a given interface. The profile specified here is used for the configuration of all the incoming calls on the specified interface. The new interfaces are assigned MIB-2 ifIndex upon creation. The interface is deleted once the circuit is closed. | |||||||||||||||||||||
| RifAutoProfileEntry | 1.3.6.1.4.1.2076.27.1.7.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to an automatic circuit profile for an interface.
| |||||||||||||||||||||
| CifAutoProfileIfIndex | 1.3.6.1.4.1.2076.27.1.7.1.1 | InterfaceIndex | NA | deprecated | |||||||||||||||||
column · InterfaceIndex · not-accessible · deprecated The MIB-2 ifIndex of the interface for which this automatic circuit profile is applicable. All incoming calls on this interface will be handled/configured according to this profile. | |||||||||||||||||||||
| CifAutoProfileIfType | 1.3.6.1.4.1.2076.27.1.7.1.2 | INTEGER | RO | deprecated | |||||||||||||||||
column · INTEGER · read-only · deprecated The type of the WAN interface. This is same as if MIB-2 ifType and ifMainType.
| |||||||||||||||||||||
| CifAutoProfileIpAddrAllocMethod | 1.3.6.1.4.1.2076.27.1.7.1.3 | INTEGER | RC | deprecated | |||||||||||||||||
column · INTEGER · read-create · deprecated The mechanism to be used for allocation of IP address for this interface. The value negotiation can be used only if PPP or MLPPP interfaces are to run over the automatic circuits. The localAddressPool(3) option takes an IP address dynamically from the IP address pool specified by the ifAutoProfileIpAddrPoolIndex. If the method specified is other(1) then either the IP address is not required or is obtained by some other method.
| |||||||||||||||||||||
| CifAutoProfileDefIpSubnetMask | 1.3.6.1.4.1.2076.27.1.7.1.4 | IpAddress | RC | deprecated | |||||||||||||||||
column · IpAddress · read-create · deprecated Specifies the default IP Subnet Mask for this profile. The value should be specified only for network interfaces and any valid VLSM is accepted. If not specified, this object takes the default subnet mask value based on the class of the IP address configured for the interface. | |||||||||||||||||||||
| CifAutoProfileDefIpBroadcastAddr | 1.3.6.1.4.1.2076.27.1.7.1.5 | IpAddress | RC | deprecated | |||||||||||||||||
column · IpAddress · read-create · deprecated Specifies the default IP broadcast address for this interface. Any valid broadcast address based on a valid VLSM is accepted. If not specified, this object takes the default value based on the class of the IP address configured for the interface. | |||||||||||||||||||||
| CifAutoProfileIdleTimeout | 1.3.6.1.4.1.2076.27.1.7.1.6 | Integer32 | RC | deprecated | |||||||||||||||||
column · Integer32 · read-create · deprecated The minimum duration (in seconds) to wait before disconnecting an idle automatic circuit. Specification of the object is mandatory. | |||||||||||||||||||||
| CifAutoProfileEncapType | 1.3.6.1.4.1.2076.27.1.7.1.7 | INTEGER | RC | deprecated | |||||||||||||||||
column · INTEGER · read-create · deprecated The encapsulation type to be used over the automatic circuit. For FR interface, the value can be nlpid(2) (for carrying protocols which have NLPID) or nlpidSnap(3) (for other protocols). The default is nlpid(2) and the types of protocols supported are inferred from the stack-layering implemented over the interface. For X.25 interface, the value can be nlpid(2) or nlpidSnap(3) (where the VC can carry multiplexed protocol traffic with each data packet containing the NLPID or SNAP header) or cudNlpid(4) or cudNlpidSnap(5) (where the CUD specifies the NLPID of the protocol or SNAP and the data packets do not contain these headers - for dedicated VCs). The default is cudNlpid(4). For ATM interface, the default is llcSnap(6) but the vcMultiplexed(7) encapsulation is also supported.
| |||||||||||||||||||||
| CifAutoProfileIpQosProfileIndex | 1.3.6.1.4.1.2076.27.1.7.1.8 | Integer32 | RC | deprecated | |||||||||||||||||
column · Integer32 · read-create · deprecated The index of an IP-QoS profile which is configured in the IP-QoS MIB. Assigning the index of the profile results in instantiation of that profile for any automatic circuit which is instantiated based on this profile (and a corresponding profile is instantiated in the IP-QoS table also). This object is optional and may be specified only for assigning an IP-QoS profile - if not specified then no profile is applied to this interface - default value is then the invalid index 0. | |||||||||||||||||||||
| CifAutoProfileRowStatus | 1.3.6.1.4.1.2076.27.1.7.1.9 | RowStatus | RC | deprecated | |||||||||||||||||
column · RowStatus · read-create · deprecated A RowStatus object for creation of automatic circuit profile on a per interface basis. It is necessary to create the parent FR,X.25 or ATM/IPoA interface before creating the automatic circuit profile for that interface. The profile is deleted once the parent interface is deleted from the system. Setting this object to notInService for an active profile will result in the profile being not applied to any new automatic circuit, but the existing circuits would not be affected. Similarly, deleting a profile would not affect existing circuits which have used that profile. | |||||||||||||||||||||
| TifIvrTable | 1.3.6.1.4.1.2076.27.1.8 | NA | |||||||||||||||||||
table · not-accessible · current A list of all the interfaces in the system with IVR related configurations. This table is an extension to the ifMainTable. The index to this table has the semantics of the ifMainIndex of the ifMainTable. | |||||||||||||||||||||
| RifIvrEntry | 1.3.6.1.4.1.2076.27.1.8.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing IVR-related information applicable to a interface.
| |||||||||||||||||||||
| CifIvrBridgedIface | 1.3.6.1.4.1.2076.27.1.8.1.1 | TruthValue | RW | 1 | |||||||||||||||||
column · TruthValue · read-write · current Indicates if this interface is a Bridged interface or not. A value of 'TRUE' indicates that this interface is a Bridged interface and is capable of performing bridging of packets through this interface. A value of 'FALSE' indicates that this interface is a Routed interface and is capable of performing routing of packets through this interface. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SifSetMgmtVlanList | 1.3.6.1.4.1.2076.27.1.9 | OCTET STRING (SIZE (0..512)) | RW | 00 | |||||||||||||||||
scalar · OCTET STRING (SIZE (0..512)) · read-write · current A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanId values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanId value in that octet. This is the set of vlans configured by management to associate with the management interface. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SifResetMgmtVlanList | 1.3.6.1.4.1.2076.27.1.10 | OCTET STRING (SIZE (0..512)) | RW | 00 | |||||||||||||||||
scalar · OCTET STRING (SIZE (0..512)) · read-write · current A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanId values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanId value in that octet. This is the set of vlans configured by management to dis-associate from the management interface. Get operation is not allowed for this object. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TifSecondaryIpAddressTable | 1.3.6.1.4.1.2076.27.1.11 | NA | |||||||||||||||||||
table · not-accessible · current A list of secondary IP addresses configured over the interfaces registered with IP. This table is a extension to the ifMainTable. The index to this table has the semantics of the ifMainIndex of the ifMainTable. Secondary IpAddress configuration should not override the primary ip address configured for any of the interface Updation of entries in this table are not allowd when RowStatus is active | |||||||||||||||||||||
| RifSecondaryIpAddressEntry | 1.3.6.1.4.1.2076.27.1.11.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry contains the information associated with the secondary(additional) ip address configured to a particular interface. | |||||||||||||||||||||
| CifSecondaryIpAddress | 1.3.6.1.4.1.2076.27.1.11.1.1 | IpAddress | NA | ||||||||||||||||||
column · IpAddress · not-accessible · current Specifies the Secondary IP address associated with the interface | |||||||||||||||||||||
| CifSecondaryIpSubnetMask | 1.3.6.1.4.1.2076.27.1.11.1.2 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current Specifies the IP Subnet Mask associted with the secondary ip address configuration. The value should be specified only for network interfaces and any valid VLSM is accepted. If not specified, this object takes the default subnet mask value based on the class of the IP address configured for the interface. | |||||||||||||||||||||
| CifSecondaryIpBroadcastAddr | 1.3.6.1.4.1.2076.27.1.11.1.3 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current Specifies the IP broadcast address associated with the configured secondary IP address. The value should be specified only for network interfaces and any valid broadcast address based on a valid VLSM is accepted. If not specified, this object takes the default value based on the class of the IP address configured for the interface. | |||||||||||||||||||||
| CifSecondaryIpRowStatus | 1.3.6.1.4.1.2076.27.1.11.1.4 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current This object is used to manage creation and deletion of rows in this table. | |||||||||||||||||||||
| TifMainExtTable | 1.3.6.1.4.1.2076.27.1.12 | NA | |||||||||||||||||||
table · not-accessible · current This table is an extension to the ifMainTable. | |||||||||||||||||||||
| RifMainExtEntry | 1.3.6.1.4.1.2076.27.1.12.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing additional management information applicable to a particular interface.
| |||||||||||||||||||||
| CifMainExtMacAddress | 1.3.6.1.4.1.2076.27.1.12.1.8 | MacAddress | RC | 00:b0:ac:41:70:2b | |||||||||||||||||
column · MacAddress · read-create · current The unicast MacAddress for each interface. The Macaddress can be set only when ifMainAdminStatus for the interface is down(2). The object is valid only for interfaces that have the ifMainType set as ethernetCsmacd(6) or ieee8023ad(161). Configuration of this object is not mandatory. If this object is not configured, the default Macaddress for the interface is obtained from the system. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifMainExtSysSpecificPortID | 1.3.6.1.4.1.2076.27.1.12.1.9 | Unsigned32 | RW | 0 | |||||||||||||||||
column · Unsigned32 · read-write · current System specific index configured for the port. It provides a different numbering space other than the IfIndex to identify ports. Valid range for this object is from 1 to 16384. The value 0 is not allowed to be set. On reading the object 0 is returned only if no other value has been configured. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifMainExtInterfaceType | 1.3.6.1.4.1.2076.27.1.12.1.10 | INTEGER | RW | frontpanelport(1) | |||||||||||||||||
column · INTEGER · read-write · current This object reflects the usage of this interface, whether it is a frontpanel interface or a backplane interface used for interswitching in distributed environments. frontpanelport - The interface behaves as a normal interface visible to the management and other protocols. backplaneport - This port operates as back plane interface in the system enabling communication across the line cards present in the system. This interface will be masked from the management control for all the protocol related operations. This can be used in distributed environments wherein protocols are ran over every individual line cards to achieve better CPU utilization and performance. Proprietary PDU and tailored control PDU flow out of this interface to keep the system information intact across the line cards present in the system. This can be enabled only over the physical interface and not over any other interface.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifMainExtPortSecState | 1.3.6.1.4.1.2076.27.1.12.1.11 | INTEGER | RW | trusted(1) | |||||||||||||||||
column · INTEGER · read-write · current The interface port security state says whether the port is connected to trusted hosts or not. If a port is trusted, the packets coming on that ports will also be trusted. By default all the ports will be untrusted. If the interface is part of a port channel it cannot be set.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifMainExtInPkts | 1.3.6.1.4.1.2076.27.1.12.1.12 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Total number of packets received on this interface. This includes the total of Unicast, Multicast and Broadcast packets received on a interface. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifMainExtLinkUpEnabledStatus | 1.3.6.1.4.1.2076.27.1.12.1.13 | INTEGER | RW | 0 | |||||||||||||||||
column · INTEGER · read-write · current This enables or disables Link Up Delay functionality in this port. A value of 'enabled'(1) indicates that, operational status of the link is suspended for a configured delay time 'ifMainExtLinkUpDelayTimer'. A value of 'disabled' (2) indicates that the operational status of the link is not delayed and indicated to the higher layers immediately.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifMainExtLinkUpDelayTimer | 1.3.6.1.4.1.2076.27.1.12.1.14 | Unsigned32 | RW | 0 | |||||||||||||||||
column · Unsigned32 · read-write · current This configures the delay timer for the link up enabled interface. It takes the timer value (in seconds) minimum value as 1 and maximum value as 1000.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifMainExtLinkUpRemainingTime | 1.3.6.1.4.1.2076.27.1.12.1.15 | Unsigned32 | RO | 0 | |||||||||||||||||
column · Unsigned32 · read-only · current This object is for displaying the pending time left for the link Operation Status to be made UP. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TifCustTLVTable | 1.3.6.1.4.1.2076.27.1.13 | NA | |||||||||||||||||||
table · not-accessible · current This table allows generic TLV data to be configured per-port. It may be used to store any port-specific information that is required by any application. | |||||||||||||||||||||
| RifCustTLVEntry | 1.3.6.1.4.1.2076.27.1.13.1 | NA | |||||||||||||||||||
| CifCustTLVType | 1.3.6.1.4.1.2076.27.1.13.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current Type of the TLV Information. | |||||||||||||||||||||
| CifCustTLVLength | 1.3.6.1.4.1.2076.27.1.13.1.2 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current Length of the TLV Information. Specification of this object is mandatory for ifCustTLVRowStatus to be made active. Length should be configured after the row creation in ifCustTLVTable and before configuring the ifCustTLVValue. The value 0 is not allowed to be set. | |||||||||||||||||||||
| CifCustTLVValue | 1.3.6.1.4.1.2076.27.1.13.1.3 | DisplayString | RC | ||||||||||||||||||
column · DisplayString · read-create · current Value of the TLV Information. The default value is 0. | |||||||||||||||||||||
| CifCustTLVRowStatus | 1.3.6.1.4.1.2076.27.1.13.1.4 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current RowStatus of the Corresponding Entry. | |||||||||||||||||||||
| TifCustOpaqueAttrTable | 1.3.6.1.4.1.2076.27.1.14 | NA | |||||||||||||||||||
table · not-accessible · current This table allows generic integer attributes to be configured per-port. These attributes will be opaque from ISS's point of view and will not be processed/understood by ISS. | |||||||||||||||||||||
| RifCustOpaqueAttrEntry | 1.3.6.1.4.1.2076.27.1.14.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry for every opaque attribute on each port. | |||||||||||||||||||||
| CifCustOpaqueAttributeID | 1.3.6.1.4.1.2076.27.1.14.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current OpaqueAttribute ID configured on the port. Four opaque attributes are supported on each port
| |||||||||||||||||||||
| CifCustOpaqueAttribute | 1.3.6.1.4.1.2076.27.1.14.1.2 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current Value for the Opaque attribute.This value can be altered when ifCustOpaqueRowStatus is ACTIVE. | |||||||||||||||||||||
| CifCustOpaqueRowStatus | 1.3.6.1.4.1.2076.27.1.14.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current RowStatus of the Corresponding Entry. NOT_IN_SERVICE value is not supported. | |||||||||||||||||||||
| TifBridgeILanIfTable | 1.3.6.1.4.1.2076.27.1.15 | NA | |||||||||||||||||||
table · not-accessible · current This table is used to read the status of an I-Lan interface created from Iftable. An I-LAN Interface is used to create internal connections between bridge ports in a 802.1 device. An I-LAN Interfaces can be directly associated with a set of bridge ports. An I-LAN Interfaces can also be used as a stacking interface to relate other interfaces before association to bridge ports. For example, an I-LAN interface can be created to link traffic between a PIP and a CBP. This involves creation of an interface of type iLan with a corresponding entry made in the ifTable. The IfIndex corresponding to the ILAN is put in the IlanifTable. A CBP is created in a B Component of IfType internal and CBP related IfEntry is stacked upon the IfEntry of the I-LAN using the IfStackTable. Similarly, a PIP is created in a I Component of IfType internal and PIP related IfEntry is stacked upon the IfEntry of the I-LAN using the IfStackTable. Finally, a VIP is created with ifType internal on the I-Component and is associated with the PIP, thus completing the path from the I-Component's MAC relay to the CBP on the B-Component. Entries in this table must be persistent over power up restart/reboot. | |||||||||||||||||||||
| RifBridgeILanIfEntry | 1.3.6.1.4.1.2076.27.1.15.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry consists of a Status to get the I-Lan interface status
| |||||||||||||||||||||
| CifBridgeILanIfStatus | 1.3.6.1.4.1.2076.27.1.15.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object is used to read the status of an I-Lan interface created from Iftable.
| |||||||||||||||||||||
| TifTypeProtoDenyTable | 1.3.6.1.4.1.2076.27.1.16 | NA | |||||||||||||||||||
table · not-accessible · current A table to configure the interface types and bridge port types accessible to various protocol(s). This table will indicate whether a particular type of interface is to be created or be visible in the given protocol module. An entry in this table will cause the particular type of interface to be denied from being accessed by the protocol i.e. the particular type of interface will not be created (i.e. visible) in the given protocol. | |||||||||||||||||||||
| RifTypeProtoDenyEntry | 1.3.6.1.4.1.2076.27.1.16.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry in this table will give the interface type and bridge port type that will not be accessible to the protocol for the mentioned context. Only valid and allowed combinations of ifTypeProtoDenyMainType and ifTypeProtoDenyBrgPortType must be configured by the administrator. | |||||||||||||||||||||
| CifTypeProtoDenyContextId | 1.3.6.1.4.1.2076.27.1.16.1.1 | Unsigned32 (0..255) | NA | ||||||||||||||||||
column · Unsigned32 (0..255) · not-accessible · current Identifies a virtual context in which to deny access of the given interface type and bridge port type to a protocol. | |||||||||||||||||||||
| CifTypeProtoDenyMainType | 1.3.6.1.4.1.2076.27.1.16.1.2 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current This object type refers to the ifMainType. The interface types that are currently supported by this table are ethernetCsmacd(6), propVirtual(53), ieee8023ad(161), brgPort(209) and pip(248).
| |||||||||||||||||||||
| CifTypeProtoDenyBrgPortType | 1.3.6.1.4.1.2076.27.1.16.1.3 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current This object type refers to ifMainBrgPortType.
| |||||||||||||||||||||
| CifTypeProtoDenyProtocol | 1.3.6.1.4.1.2076.27.1.16.1.4 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current Identifies the protocol for which the corresponding interface type and bridge port type will not be accessible/visible.
| |||||||||||||||||||||
| CifTypeProtoDenyRowStatus | 1.3.6.1.4.1.2076.27.1.16.1.5 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current Indicates the status of the row. Valid values are 'createAndGo' and 'destroy'. A row can be created in this table by assigning the value 'createAndGo' for the status object which will cause the entry to become active. An 'active' entry will identify the interface type and bridge port type that will not be acccessible to the specified protocol for the context. In other words, interfaces of the given interface type and bridge port type will not be visible/created in the given protocol. An 'active' row can be deleted by assigning the value 'destroy' to the status. Once the entry is destroyed then all the interfaces of the specified interface type and bridge port type will be accessible to the specified protocol for the context. | |||||||||||||||||||||
| SifmDebug | 1.3.6.1.4.1.2076.27.1.17 | Unsigned32 (0..4294967295) | RW | 0 | |||||||||||||||||
scalar · Unsigned32 (0..4294967295) · read-write · current Enables the tracing in the selected submodule in CFA. A 32 bit
integer is used to store the Tracing level in the specified module.
Different Tracing Levels -
BIT 0 - Initialisation and Shutdown Trace.
BIT 1 - Management trace.
BIT 2 - Data path trace.
BIT 3 - Control Plane trace.
BIT 4 - Packet Dump.
BIT 5 - OS Resource trace.
BIT 6 - All Failure trace (All failures including Packet Validation)
BIT 7 - Buffer Trace.
Different submodule tracing.
BIT 25 - ENET packet dump.
BIT 26 - IP packet dump.
BIT 27 - ARP packet dump.
BIT 28 - Exit Trace used during intialization.
BIT 29 - Error messages.
The remaining bits are reserved. The combination of levels and
submodules are allowed i.e. Tracing can be allowed at all failure
and data path level in All submodules by setting the BIT
appropriately.
For Example, setting the debug value to the following bit stream,
00000000000000010000000000000100 will enable data path trace
prints in CFA module. Multiple submodules and multiple levels can
be combined by setting the corresponding bits.
For Example, setting the debug value to the following bit stream,
00000000000000110000000000001100 will enable data path and
control plane trace prints in CFA and CFA Priority modules.
Note : BIT0 is the least significant bit and BIT31 is the most
significant bit.Example values from LibreNMS test devices
| |||||||||||||||||||||
| TifIvrMappingTable | 1.3.6.1.4.1.2076.27.1.18 | NA | |||||||||||||||||||
table · not-accessible · current This table is used to configure the list of vlans to be associated for an IVR interface. The primary Index to this table can only be a IVR interface. | |||||||||||||||||||||
| RifIvrMappingEntry | 1.3.6.1.4.1.2076.27.1.18.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry in this table gives an assoicated vlan to an IVR interface. | |||||||||||||||||||||
| CifIvrAssociatedVlan | 1.3.6.1.4.1.2076.27.1.18.1.1 | VlanId | NA | ||||||||||||||||||
column · VlanId · not-accessible · current This object specifies one of the associated VLANs for a given IVR interface. Vlan Id associated with an IVR interface during IVR interface creation, should not be configured as ifIvrAssociatedVlan for that IVR interface. ifIvrAssociatedVlan and the primary vlan (vlan associated with IVR during IVR creation) for an IVR interface should be in the same Layer 2 context. | |||||||||||||||||||||
| CifIvrMappingRowStatus | 1.3.6.1.4.1.2076.27.1.18.1.2 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Denotes the Row Status for port isolation table entry.
Only 'CreateAndGo' and 'destroy' values are allowed for this
object. 'CreateAndWait' and 'notInService' values are not allowed.
Example:
To add vlans 2, 3 as associated vlans to an IVR interface with
interface index as 10 in this table, the following sequence
to be followed:
1. Set the ifIvrMappingRowStatus as 'CreateAndGo' for the
entry with index
(ifMainIndex = 10, ifIvrAssociatedVlan = 2)
2. Set the ifIvrMappingRowStatus as 'CreateAndGo' for the
entry with index
(ifMainIndex = 10, ifIvrAssociatedVlan = 3)
To delete vlan 3 from the list of associated vlans for an IVR
interface with IfIndex = 10 ports, do the following:
Set the ifIvrMappingRowStatus as 'destroy' for the
entry with index
(ifMainIndex = 10, ifIvrAssociatedVlan = 3). | |||||||||||||||||||||
| TifHCErrorTable | 1.3.6.1.4.1.2076.27.1.19 | NA | |||||||||||||||||||
table · not-accessible · current A list of interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the interface table. | |||||||||||||||||||||
| RifHCErrorEntry | 1.3.6.1.4.1.2076.27.1.19.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing additional management information applicable to a particular interface.
| |||||||||||||||||||||
| CifHCInDiscards | 1.3.6.1.4.1.2076.27.1.19.1.1 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. This object is a 64-bit version of ifInDiscards Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifHCInErrors | 1.3.6.1.4.1.2076.27.1.19.1.2 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character- oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. This object is a 64-bit version of ifInErrors Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifHCInUnknownProtos | 1.3.6.1.4.1.2076.27.1.19.1.3 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For character-oriented or fixed-length interfaces that support protocol multiplexing the number of transmission units received via the interface which were discarded because of an unknown or unsupported protocol. For any interface that does not support protocol multiplexing, this counter will always be 0. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. This object is a 64-bit version of ifInUnknownProtos Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifHCOutDiscards | 1.3.6.1.4.1.2076.27.1.19.1.4 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. This object is a 64-bit version of ifOutDiscards Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifHCOutErrors | 1.3.6.1.4.1.2076.27.1.19.1.5 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. This object is a 64-bit version of ifHCOutErrors Example values from LibreNMS test devices
| |||||||||||||||||||||
| SifSecurityBridging | 1.3.6.1.4.1.2076.27.1.20 | INTEGER | RW | disabled(2) | |||||||||||||||||
scalar · INTEGER · read-write · current Enables or Disables Security for Bridged Packets globally.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SifSetSecVlanList | 1.3.6.1.4.1.2076.27.1.21 | OCTET STRING (SIZE (0..512)) | RW | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..512)) · read-write · current A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanId values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanId value in that octet. Packets Bridged on these VLAN's should be Secured | |||||||||||||||||||||
| SifResetSecVlanList | 1.3.6.1.4.1.2076.27.1.22 | OCTET STRING (SIZE (0..512)) | RW | | |||||||||||||||||
scalar · OCTET STRING (SIZE (0..512)) · read-write · current A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanId values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanId value in that octet. This is the set of vlans to dis-associate security for Packets Bridged on these VLAN's Example values from LibreNMS test devices
| |||||||||||||||||||||
| SifSecIvrIfIndex | 1.3.6.1.4.1.2076.27.1.23 | Integer32 | RW | 65535 | |||||||||||||||||
scalar · Integer32 · read-write · current An Integer which Indicates the IfIndex of IVR Interface used in Security Processing of Bridged Traffic Example values from LibreNMS test devices
| |||||||||||||||||||||
| TifAvailableIndexTable | 1.3.6.1.4.1.2076.27.1.24 | NA | |||||||||||||||||||
table · not-accessible · current This table returns the next available free interface index for the given interface type | |||||||||||||||||||||
| RifAvailableIndexEntry | 1.3.6.1.4.1.2076.27.1.24.1 | NA | |||||||||||||||||||
| CifAvailableFreeIndex | 1.3.6.1.4.1.2076.27.1.24.1.1 | InterfaceIndex | RO | 11 | |||||||||||||||||
column · InterfaceIndex · read-only · current This is the next available free interfac index for a given ifType Example values from LibreNMS test devices
| |||||||||||||||||||||
| TifACTable | 1.3.6.1.4.1.2076.27.1.25 | NA | |||||||||||||||||||
table · not-accessible · current A list of Attachment Circuit interface related configurations. Attachment Circuit is a virtual interface that is a combination of physical port and customer vlan identifier or it is a virtual interface that contains underlying physical port alone. This table is an extension to the ifMainTable. The index to this table has the semantics of the ifMainIndex of the ifMainTable. | |||||||||||||||||||||
| RifACEntry | 1.3.6.1.4.1.2076.27.1.25.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing AC-related information applicable to attachment cirucit interface only.
| |||||||||||||||||||||
| CifACPortIdentifier | 1.3.6.1.4.1.2076.27.1.25.1.1 | InterfaceIndex | RW | ||||||||||||||||||
column · InterfaceIndex · read-write · current This is the physical interface on which the attachment circuit interface is present. The operational status of the attachment circuit interface depends on this port's operational status. That is if the operational status of ifACPortIdentifier's is UP or DOWN, then the operational status of the AC interface will be UP or DOWN respectively. | |||||||||||||||||||||
| CifACCustomerVlan | 1.3.6.1.4.1.2076.27.1.25.1.2 | VlanId | RW | ||||||||||||||||||
column · VlanId · read-write · current This is the customer vlan present for the attachment circuit interface. This object alone can not determine the attachment circuit interface. To determine that, this object should be together present with the ifACPortIdentifier.This is the optional paramater. | |||||||||||||||||||||
| SifUfdSystemControl | 1.3.6.1.4.1.2076.27.1.26 | INTEGER | RW | shutdown(2) | |||||||||||||||||
scalar · INTEGER · read-write · current The administrative system control status of the Uplink Failure Detection(UFD) module. The value 'start' (1) indicates that the Uplink Failure Detection(UFD) feature should be started in the system and all resources required by Uplink Failure Detection(UFD) module should be allocated. The value 'shutdown' (2) indicates that the Uplink Failure Detection(UFD) feature should be shutdown in the device and all allocated memory must be released.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SifUfdModuleStatus | 1.3.6.1.4.1.2076.27.1.27 | INTEGER | RW | disabled(2) | |||||||||||||||||
scalar · INTEGER · read-write · current This read write objects gives actual status of the Uplink Failure Detection(UFD). When Uplink Failure Detection(UFD) is enabled, UFD starts functioning. When the UFD is disabled all the dynamically allocated memory will be freed and Uplink Failure Detection (UFD) stops functioning.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SifSplitHorizonSysControl | 1.3.6.1.4.1.2076.27.1.28 | INTEGER | RW | 0 | |||||||||||||||||
scalar · INTEGER · read-write · current The administrative system control status requested by management for Split Horizon. The value 'start' (1) indicates that all resources required for split horizon should be allocated and Split horizon should be supported in the device on all ports. The value 'shutdown' (2) indicates that Split Horizon should be shutdown in the device on all ports and all allocated memory must be released.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SifSplitHorizonModStatus | 1.3.6.1.4.1.2076.27.1.29 | INTEGER | RW | 0 | |||||||||||||||||
scalar · INTEGER · read-write · current The administrative module status requested by management for Split Horizon.This enables or disables Split horizon in the system. A value of 'enabled'(1) indicates that split horizon must be enabled in all the ports in the system.A value of 'disabled' (2) indicates that split horizon must be disabled in all the ports in the system .
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TifUfdGroupTable | 1.3.6.1.4.1.2076.27.1.30 | NA | |||||||||||||||||||
table · not-accessible · current This table contains a list of all the Uplink Failure Detection (UFD). Group entries in the system. This table is a extension to the ifMainTable. The index to this table is the group id. Entries are created when the group id is created in this table. | |||||||||||||||||||||
| RifUfdGroupEntry | 1.3.6.1.4.1.2076.27.1.30.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing group information with uplink/downlink port count and status of the group.
| |||||||||||||||||||||
| CifUfdGroupId | 1.3.6.1.4.1.2076.27.1.30.1.1 | Integer32 (1..65535) | NA | ||||||||||||||||||
column · Integer32 (1..65535) · not-accessible · current An identifier that uniquely identifies the group Entry in this table. | |||||||||||||||||||||
| CifUfdGroupName | 1.3.6.1.4.1.2076.27.1.30.1.2 | DisplayString (SIZE (1..32)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (1..32)) · read-write · current This object is used to identity the Uplink Failure Detection (UFD) Group-name. | |||||||||||||||||||||
| CifUfdGroupStatus | 1.3.6.1.4.1.2076.27.1.30.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object for indicating the status of the group. The group status can be set 'up' only when any one uplink port is in admin and operationally 'UP' state in the group. The group status can be set 'down' only when all uplink ports within the group is in admin and operationally 'DOWN' or none uplink ports assigned in the group.
| |||||||||||||||||||||
| CifUfdGroupUplinkPorts | 1.3.6.1.4.1.2076.27.1.30.1.4 | PortList | RW | ||||||||||||||||||
column · PortList · read-write · current Specifies the complete set of uplink ports which are mapped with group | |||||||||||||||||||||
| CifUfdGroupDownlinkPorts | 1.3.6.1.4.1.2076.27.1.30.1.5 | PortList | RW | ||||||||||||||||||
column · PortList · read-write · current Specifies the complete set of downlink ports which are mapped with group | |||||||||||||||||||||
| CifUfdGroupDesigUplinkPort | 1.3.6.1.4.1.2076.27.1.30.1.6 | InterfaceIndex | RW | deprecated | |||||||||||||||||
column · InterfaceIndex · read-write · deprecated A port is termed as designated uplink when the port is connected to the network and it has more preference to a particular set of uplink ports. Broadcast/unknown multicast will use this designated port to reach uplink. | |||||||||||||||||||||
| CifUfdGroupUplinkCount | 1.3.6.1.4.1.2076.27.1.30.1.7 | Integer32 (1..48) | RO | ||||||||||||||||||
column · Integer32 (1..48) · read-only · current A counter which indicates the number of Uplink ports within the group | |||||||||||||||||||||
| CifUfdGroupDownlinkCount | 1.3.6.1.4.1.2076.27.1.30.1.8 | Integer32 (1..48) | RO | ||||||||||||||||||
column · Integer32 (1..48) · read-only · current A counter which indicates the number of Downlink ports within the group | |||||||||||||||||||||
| CifUfdGroupRowStatus | 1.3.6.1.4.1.2076.27.1.30.1.9 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current This object is used to manage creation and deletion of rows in this Uplink Failure Detection(UFD) group table. | |||||||||||||||||||||
| SifLinkUpEnabledStatus | 1.3.6.1.4.1.2076.27.1.31 | INTEGER | RW | 0 | |||||||||||||||||
scalar · INTEGER · read-write · current This enables or disables Link Up Delay functionality in the System. A value of 'enabled'(1) indicates that, operational status of the link is suspended for a configured delay time 'ifMainExtLinkUpDelayTimer'. A value of 'disabled' (2) indicates that the operational status of the link is not delayed and indicated to the higher layers immediately.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SifOOBNode0SecondaryIpAddress | 1.3.6.1.4.1.2076.27.1.32 | IpAddress | RW | 0.0.0.0 | |||||||||||||||||
scalar · IpAddress · read-write · current Specifies the secondary IP address associated with the OOB interface of Node0 Example values from LibreNMS test devices
| |||||||||||||||||||||
| SifOOBNode0SecondaryIpMask | 1.3.6.1.4.1.2076.27.1.33 | IpAddress | RW | 0.0.0.0 | |||||||||||||||||
scalar · IpAddress · read-write · current Specifies the IP Subnet Mask associted with the secondary ip address of OOB interface in node0. If not specified, this object takes the default subnet mask value based on the class of the IP address configured for the interface. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SifOOBNode1SecondaryIpAddress | 1.3.6.1.4.1.2076.27.1.34 | IpAddress | RW | 0.0.0.0 | |||||||||||||||||
scalar · IpAddress · read-write · current Specifies the secondary IP address associated with the OOB interface of Node1 Example values from LibreNMS test devices
| |||||||||||||||||||||
| SifOOBNode1SecondaryIpMask | 1.3.6.1.4.1.2076.27.1.35 | IpAddress | RW | 0.0.0.0 | |||||||||||||||||
scalar · IpAddress · read-write · current Specifies the IP Subnet Mask associted with the secondary ip address of OOB interface in node1. If not specified, this object takes the default subnet mask value based on the class of the IP address configured for the interface. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TifVlanIpTable | 1.3.6.1.4.1.2076.27.1.36 | NA | |||||||||||||||||||
table · not-accessible · current This table contains L3 interface attributes that are used for manipulating entries in various tables. ifVlanIpTable entry creation, modification and deletion results in related actions being performed for the ifMainTable and the ifIpTable. Likewise, data returned through ifVlanIpTable table queries is derived from these tables. | |||||||||||||||||||||
| RifVlanIpEntry | 1.3.6.1.4.1.2076.27.1.36.1 | NA | |||||||||||||||||||
row · not-accessible · current Information about the L3 interface settings for a specific VLAN on the device.
| |||||||||||||||||||||
| CifVlanIpVlanId | 1.3.6.1.4.1.2076.27.1.36.1.1 | VlanId | NA | ||||||||||||||||||
column · VlanId · not-accessible · current VLAN ID for the L3 interface specification. | |||||||||||||||||||||
| CifVlanIpIfIndex | 1.3.6.1.4.1.2076.27.1.36.1.2 | InterfaceIndex | RO | ||||||||||||||||||
column · InterfaceIndex · read-only · current The ifIndex associated with the VLAN ID for this L3 interface specification. An ifIndex is automatically allocated when a new entry is created. The ifIndex and related settings are automatically deleted when an entry is destroyed. | |||||||||||||||||||||
| CifVlanIpAdminStatus | 1.3.6.1.4.1.2076.27.1.36.1.3 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current The desired state of the interface. This attribute has similar semantics to the ifAdminStatus object of the standard ifTable.
| |||||||||||||||||||||
| CifVlanIpAddrAllocMethod | 1.3.6.1.4.1.2076.27.1.36.1.4 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current The mechanism to be used for allocation of the IPv4 address for this L3 VLAN interface.
| |||||||||||||||||||||
| CifVlanIpAddr | 1.3.6.1.4.1.2076.27.1.36.1.5 | IpAddress | RC | ||||||||||||||||||
column · IpAddress · read-create · current Specifies the IPv4 address assigned to this L3 VLAN interface. A valid IpAddress value is required when creating a new entry and the associated address allocation method is 'manual'. A zero IpAddress value is required when creating a new entry and the associated address allocation method is 'dynamic'. | |||||||||||||||||||||
| CifVlanIpSubnetMask | 1.3.6.1.4.1.2076.27.1.36.1.6 | IpAddress | RC | ||||||||||||||||||
column · IpAddress · read-create · current Specifies the IPv4 address subnet mask assigned to this L3 VLAN interface. A valid subnet mask value is required when creating a new entry and the associated address allocation method is 'manual'. A zero subnet mask value is required when creating a new entry and the associated address allocation method is 'dynamic'. | |||||||||||||||||||||
| CifVlanIpRowStatus | 1.3.6.1.4.1.2076.27.1.36.1.10 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current This object allows entries to be created, modified and deleted in the ifVlanIpTable. Values 'createAndWait', 'active' and 'destroy' are supported for Sets. The rowStatus value of the underlying ifMainEntry is returned when entry data is queried. Entry creation requires data for all read-create attributes to be specified with a 'createAndWait' RowStatus value. The ifVlanIpAdminStatus is the only value that can be modified in an existing entry. This action is performed by specifying the requested admin status with a 'active' RowStatus value. Table entries are deleted with a 'destroy' RowStatus. No other attributes need to be specified for this action to be performed. | |||||||||||||||||||||
| Nff | 1.3.6.1.4.1.2076.27.2 | ||||||||||||||||||||
| SffFastForwardingEnable | 1.3.6.1.4.1.2076.27.2.1 | TruthValue | RW | deprecated | 2 | ||||||||||||||||
scalar · TruthValue · read-write · deprecated This object permits the enabling and disabling of the Fast Forwarding feature in the router. Setting of this variable to TRUE(1) enables fast-forwarding and setting it to FALSE(2) disables it. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SffCacheSize | 1.3.6.1.4.1.2076.27.2.2 | Integer32 (10..65535) | RW | deprecated | 0 | ||||||||||||||||
scalar · Integer32 (10..65535) · read-write · deprecated This object permits the resizing of the Host Cache. This object can be changed only when the Fast Forwarding Mechanism is disabled. For changing the Cache Size, The Fast-Forwarding Mechanism should be disabled first (this will result in loss of all current entries in the cache) and then enabled again after specifying the new size. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SffIpChecksumValidationEnable | 1.3.6.1.4.1.2076.27.2.3 | TruthValue | RW | deprecated | 0 | ||||||||||||||||
scalar · TruthValue · read-write · deprecated This object permits the enabling and disabling of the validation of the IP Checksum for incoming IP packets. Setting of this variable to TRUE(1) enables the checksum validation and setting it to FALSE(2) disables it. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SffCachePurgeCount | 1.3.6.1.4.1.2076.27.2.4 | Counter32 | RO | deprecated | 0 | ||||||||||||||||
scalar · Counter32 · read-only · deprecated A counter which indicates the number of times the entries in the Host Cache Table were purged due to cache overflow. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SffCacheLastPurgeTime | 1.3.6.1.4.1.2076.27.2.5 | TimeStamp | RO | deprecated | 0 (0d 0h 0m 0s) | ||||||||||||||||
scalar · TimeStamp · read-only · deprecated Indicates the SysUpTime when the last purging of entries in the Host Cache Table took place. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SffStaticEntryInvalidTrapEnable | 1.3.6.1.4.1.2076.27.2.6 | TruthValue | RW | deprecated | 0 | ||||||||||||||||
scalar · TruthValue · read-write · deprecated Permits enabling and disabling of the generation of ffStaticEntryInvalid SNMP Enterprise Trap when a static entry becomes invalid. When its value is TRUE(1), the trap is generated when a static entry become invalid. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SffCurrentStaticEntryInvalidCount | 1.3.6.1.4.1.2076.27.2.7 | Counter32 | RO | deprecated | 0 | ||||||||||||||||
scalar · Counter32 · read-only · deprecated A counter which indicates the number of static entries in the Host Cache Table that are currently invalid. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SffTotalEntryCount | 1.3.6.1.4.1.2076.27.2.8 | Counter32 | RO | deprecated | 0 | ||||||||||||||||
scalar · Counter32 · read-only · deprecated A counter which indicates the total number of entries in the Host Cache Table. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SffStaticEntryCount | 1.3.6.1.4.1.2076.27.2.9 | Counter32 | RO | deprecated | 0 | ||||||||||||||||
scalar · Counter32 · read-only · deprecated A counter which indicates the number of static entries in the Host Cache Table. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SffTotalPktsFastForwarded | 1.3.6.1.4.1.2076.27.2.10 | Counter32 | RO | deprecated | 0 | ||||||||||||||||
scalar · Counter32 · read-only · deprecated A counter which indicates the number of packets that were successfully fast-forwarded by the host cache mechanism. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TffHostCacheTable | 1.3.6.1.4.1.2076.27.2.11 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated This table has entries corresponding to the current entries in the Host Cache. The entries in this table can be added, deleted or modified. | |||||||||||||||||||||
| RffHostCacheEntry | 1.3.6.1.4.1.2076.27.2.11.1 | NA | deprecated | ||||||||||||||||||
row · not-accessible · deprecated An Entry consisting of all the information about an entry in the Host Cache.
| |||||||||||||||||||||
| CffHostCacheDestAddr | 1.3.6.1.4.1.2076.27.2.11.1.1 | IpAddress | NA | deprecated | |||||||||||||||||
column · IpAddress · not-accessible · deprecated The IP address of the destination host. | |||||||||||||||||||||
| CffHostCacheNextHopAddr | 1.3.6.1.4.1.2076.27.2.11.1.2 | IpAddress | RC | deprecated | |||||||||||||||||
column · IpAddress · read-create · deprecated The IP address of the next-hop to which a packet for this host are forwarded. This could be same as ffHostCacheDestAddr if the next-hop is the end-host as well. When creating a static entry, this object should be set with the IP address of the next-hop (router) for a host which is not directly connected to our system and with the IP address of the host itself for a host which is directly connected to us. A set on this object for an entry whose ffHostCacheEntryType is dynamic is not permitted. | |||||||||||||||||||||
| CffHostCacheIfIndex | 1.3.6.1.4.1.2076.27.2.11.1.3 | InterfaceIndex | RC | deprecated | |||||||||||||||||
column · InterfaceIndex · read-create · deprecated Identifies the MIB-2 ifIndex of the outgoing interface over which packets to this host are sent. When creating a static entry, this object should be set with the ifIndex of our network interface for reaching the specified next-hop. It is mandatory to specify the next-hop IP address using the ffHostCacheNextHopAddr before setting this value. The specified ifIndex should be that of an interface which is registered with IP. A set on this object for an entry whose ffHostCacheEntryType is dynamic is not permitted. | |||||||||||||||||||||
| CffHostCacheNextHopMediaAddr | 1.3.6.1.4.1.2076.27.2.11.1.4 | OCTET STRING (SIZE (0..6)) | RC | deprecated | |||||||||||||||||
column · OCTET STRING (SIZE (0..6)) · read-create · deprecated Provides the media address of the next-hop to which the packet for this host is to be sent to. It is mandatory to specify the next-hop IP address and the outgoing ifIndex using the ffHostCacheNextHopAddr and ffHostCacheIfIndex respectively before setting this value. This object must be specified for hosts, which are reached through the interfaces of ethernetCsmacd(6) and iso88025TokenRing(9) type. The value for such interfaces would be the MAC address as per the representation used for the particular media. For interfaces of type ppp(23) and pppMultilinkBundle(108), this object must have the default value 0. For virtual circuit interfaces (type miox25(38) and frameRelayMPI(92)), this object must have the MIB-2 ifIndex assigned to the respective virtual circuit. For virtual interfaces (type ipOverAtm(114) and frameRelay(32)), this object MAY be used to (optionally) specify the MIB-2 ifIndex assigned to the outgoing virtual circuit. If not specified the value would be obtained automatically from the respective modules. A set on this object for an entry whose ffHostCacheEntryType is dynamic is not permitted. | |||||||||||||||||||||
| CffHostCacheHits | 1.3.6.1.4.1.2076.27.2.11.1.5 | Counter32 | RO | deprecated | |||||||||||||||||
column · Counter32 · read-only · deprecated Indicates the total number of packets fast- forwarded to this host. | |||||||||||||||||||||
| CffHostCacheLastHitTime | 1.3.6.1.4.1.2076.27.2.11.1.6 | TimeStamp | RO | deprecated | |||||||||||||||||
column · TimeStamp · read-only · deprecated Indicates the SysUpTime when the last packet was fast-forwarded to this host. | |||||||||||||||||||||
| CffHostCacheEntryType | 1.3.6.1.4.1.2076.27.2.11.1.7 | INTEGER | RC | deprecated | |||||||||||||||||
column · INTEGER · read-create · deprecated An object, which indicates the type of this Host Cache entry. A static entry is an entry created by the Network Manager and is not purged by the system. Such entries would be invalidated due to route or other changes but will continue to remain in the Host Cache. Dynamic entries are those entries which have been learnt by the system and which can be purged in the event of a cache overflow or invalidation due to route or other changes. All entries created through SNMP must set this object to static otherwise.
| |||||||||||||||||||||
| CffHostCacheRowStatus | 1.3.6.1.4.1.2076.27.2.11.1.8 | RowStatus | RC | deprecated | |||||||||||||||||
column · RowStatus · read-create · deprecated A RowStatus object for addition/deletion of Host Cache entries. It also indicates the status of the entry. Set action is not allowed for notInService(2). An entry, which has become invalid due to a route failure or address resolution failure, would have the status 'notInService'. An entry for a host for which the link layer information can be cached but the information is not currently available would have the status 'notReady'. All active entries with all possible information complete would have the value 'active'. | |||||||||||||||||||||
| Nfm | 1.3.6.1.4.1.2076.27.3 | ||||||||||||||||||||
| SfmMemoryResourceTrapEnable | 1.3.6.1.4.1.2076.27.3.1 | TruthValue | RW | deprecated | 0 | ||||||||||||||||
scalar · TruthValue · read-write · deprecated Permits the enabling and disabling of fmLowMemoryResource Trap when a memory allocation failure is encountered in the module. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SfmTimersResourceTrapEnable | 1.3.6.1.4.1.2076.27.3.2 | TruthValue | RW | deprecated | 0 | ||||||||||||||||
scalar · TruthValue · read-write · deprecated Permits the enabling and disabling of fmLowTimerResource Trap when a request for a timer fails in the module. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SfmTracingEnable | 1.3.6.1.4.1.2076.27.3.3 | Integer32 | RW | deprecated | 0 | ||||||||||||||||
scalar · Integer32 · read-write · deprecated Permits the enabling and disabling of the generation of the log/trace messages throughout the module. This object acts as a Tracing Level Flag and specifies the level of trace or log to be enabled in the module. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SfmMemAllocFailCount | 1.3.6.1.4.1.2076.27.3.4 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Maintains a count of the number of times when a failure was encountered while memory allocation operation in the module. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SfmTimerReqFailCount | 1.3.6.1.4.1.2076.27.3.5 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Maintains a count of the number of times when a failure was encountered while requesting a timer in the module. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ntraps | 1.3.6.1.4.1.2076.27.4 | ||||||||||||||||||||
| NtrapPrefix | 1.3.6.1.4.1.2076.27.4.0 | ||||||||||||||||||||
| !fmLowTimerResource | 1.3.6.1.4.1.2076.27.4.0.1 | deprecated | |||||||||||||||||||
notification · deprecated This trap is generated whenever there is a failure in a timer related operation in the module. This trap is generated only when the value of the fmTimersResouceTrapEnable object is TRUE(1).
| |||||||||||||||||||||
| !fmLowBufferResource | 1.3.6.1.4.1.2076.27.4.0.2 | deprecated | |||||||||||||||||||
notification · deprecated This trap is generated when a memory allocation failure occurs in the module. This trap is generated only when the value of the fmMemoryResourceTrapEnable object is TRUE(1).
| |||||||||||||||||||||
| !ffStaticEntryInvalid | 1.3.6.1.4.1.2076.27.4.0.3 | deprecated | |||||||||||||||||||
notification · deprecated This trap is generated when a static entry in the ffHostCacheTable becomes invalid due to a route deletion or address resolution failure. This trap is generated only when the value of the ffStaticEntryInvalidTrapEnable object is TRUE (1). | |||||||||||||||||||||
| !ifCreated | 1.3.6.1.4.1.2076.27.4.0.4 | ||||||||||||||||||||
notification · current This trap is generated when interface Row Status is Active or interface is created.
| |||||||||||||||||||||
| !ifDeleted | 1.3.6.1.4.1.2076.27.4.0.5 | ||||||||||||||||||||
notification · current This trap is generated when interface Row Status is Destroy or interface is deleted.
| |||||||||||||||||||||
| !ifUfdEnabled | 1.3.6.1.4.1.2076.27.4.0.6 | ||||||||||||||||||||
notification · current This trap is generated when the interface's Uplink Failure Detection(UFD) operational status is moved from UFD error disabled to Up state
| |||||||||||||||||||||
| !ifUfdErrorDisabled | 1.3.6.1.4.1.2076.27.4.0.7 | ||||||||||||||||||||
notification · current This trap is generated when the interface's Uplink Failure Detection(UFD) operational status is moved from Up to UFD error disabled state
| |||||||||||||||||||||
| Npa | 1.3.6.1.4.1.2076.27.5 | ||||||||||||||||||||
| TfsPacketAnalyserTable | 1.3.6.1.4.1.2076.27.5.1 | NA | |||||||||||||||||||
table · not-accessible · current This table is used by the Packet Analyser for Pattern matching on particular ports | |||||||||||||||||||||
| RfsPacketAnalyserEntry | 1.3.6.1.4.1.2076.27.5.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing Pattern matching information used by the Packet analyser | |||||||||||||||||||||
| CfsPacketAnalyserIndex | 1.3.6.1.4.1.2076.27.5.1.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current An arbitrary integer value, greater than zero, which uniquely identifies a pattern to be matched | |||||||||||||||||||||
| CfsPacketAnalyserWatchValue | 1.3.6.1.4.1.2076.27.5.1.1.2 | DisplayString (SIZE (0..1600)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..1600)) · read-write · current This represents the pattern which is to be matched in the packet to be analysed by the packet analyser | |||||||||||||||||||||
| CfsPacketAnalyserWatchMask | 1.3.6.1.4.1.2076.27.5.1.1.3 | DisplayString (SIZE (0..1600)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..1600)) · read-write · current The mask for the pattern to be matched by the packet analyser | |||||||||||||||||||||
| CfsPacketAnalyserWatchPorts | 1.3.6.1.4.1.2076.27.5.1.1.4 | PortList | RW | ||||||||||||||||||
column · PortList · read-write · current Specifies the complete set of ports over which the pattern is to be matched by the packet analyser | |||||||||||||||||||||
| CfsPacketAnalyserMatchPorts | 1.3.6.1.4.1.2076.27.5.1.1.5 | PortList | RO | ||||||||||||||||||
column · PortList · read-only · current Specifies the complete set of ports over which the pattern is matched by the packet analyser | |||||||||||||||||||||
| CfsPacketAnalyserCounter | 1.3.6.1.4.1.2076.27.5.1.1.6 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of times the pattern was matched over the watched ports | |||||||||||||||||||||
| CfsPacketAnalyserTime | 1.3.6.1.4.1.2076.27.5.1.1.7 | TimeTicks | RO | ||||||||||||||||||
column · TimeTicks · read-only · current The value of sysUpTime when the pattern was last matched | |||||||||||||||||||||
| CfsPacketAnalyserCreateTime | 1.3.6.1.4.1.2076.27.5.1.1.8 | TimeTicks | RO | ||||||||||||||||||
column · TimeTicks · read-only · current The value of sysUpTime when the system was initiated | |||||||||||||||||||||
| CfsPacketAnalyserStatus | 1.3.6.1.4.1.2076.27.5.1.1.9 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current Specifies the Row Status for the entry in this table | |||||||||||||||||||||
| TfsPacketTransmitterTable | 1.3.6.1.4.1.2076.27.5.2 | NA | |||||||||||||||||||
table · not-accessible · current This table is used by the Packet Transmitter for sending the packets on particular ports | |||||||||||||||||||||
| RfsPacketTransmitterEntry | 1.3.6.1.4.1.2076.27.5.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing Packet information used by the Packet Transmitter | |||||||||||||||||||||
| CfsPacketTransmitterIndex | 1.3.6.1.4.1.2076.27.5.2.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current An arbitrary integer value, greater than zero, which uniquely identifies a packet to be sent | |||||||||||||||||||||
| CfsPacketTransmitterValue | 1.3.6.1.4.1.2076.27.5.2.1.2 | DisplayString (SIZE (0..1600)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..1600)) · read-write · current This represents the pattern which is to be sent through the given port by the packet transmitter | |||||||||||||||||||||
| CfsPacketTransmitterPort | 1.3.6.1.4.1.2076.27.5.2.1.3 | PortList | RW | ||||||||||||||||||
column · PortList · read-write · current Specifies the port over which the packet is to be sent by the packet transmitter | |||||||||||||||||||||
| CfsPacketTransmitterInterval | 1.3.6.1.4.1.2076.27.5.2.1.4 | TimeTicks | RW | ||||||||||||||||||
column · TimeTicks · read-write · current The Time interval for sending the packet over the port in seconds | |||||||||||||||||||||
| CfsPacketTransmitterCount | 1.3.6.1.4.1.2076.27.5.2.1.5 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current Number of packet to be sent over the ports | |||||||||||||||||||||
| CfsPacketTransmitterStatus | 1.3.6.1.4.1.2076.27.5.2.1.6 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current Specifies the Row Status for the entry in this table | |||||||||||||||||||||
Traps / Notifications
- ffStaticEntryInvalid
1.3.6.1.4.1.2076.27.4.0.3 - fmLowBufferResource
1.3.6.1.4.1.2076.27.4.0.2 - fmLowTimerResource
1.3.6.1.4.1.2076.27.4.0.1 - ifCreated
1.3.6.1.4.1.2076.27.4.0.4 - ifDeleted
1.3.6.1.4.1.2076.27.4.0.5 - ifUfdEnabled
1.3.6.1.4.1.2076.27.4.0.6 - ifUfdErrorDisabled
1.3.6.1.4.1.2076.27.4.0.7