CMM4-MIB
MotorolaThis module contains CMM4 MIB definitions.
snmptranslate -m CMM4-MIB -Tpsnmpwalk -v2c -c <community> -m CMM4-MIB <host> 1.3.6.1.4.1.161.19.1.1.15Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
| WHISP-GLOBAL-REG-MIB | whispBox, whispCMM4, whispModules |
| WHISP-TCV2-MIB | EventString, WhispLUID, WhispMACAddress |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Icmm4MibModule | 1.3.6.1.4.1.161.19.1.1.15 | ||||||||||||
identity This module contains CMM4 MIB definitions. | |||||||||||||
| Ncmm4Groups | 1.3.6.1.4.1.161.19.3.6.1 | ||||||||||||
| Gcmm4PortCfgGroup | 1.3.6.1.4.1.161.19.3.6.1.1 | ||||||||||||
group · current CMM4 Port Configuration Table. | |||||||||||||
| Gcmm4ConfigGroup | 1.3.6.1.4.1.161.19.3.6.1.2 | ||||||||||||
group · current CMM4 configuration group. | |||||||||||||
| Gcmm4PortStatusGroup | 1.3.6.1.4.1.161.19.3.6.1.3 | ||||||||||||
| Gcmm4StatusGroup | 1.3.6.1.4.1.161.19.3.6.1.4 | ||||||||||||
group · current CMM4 Status group. | |||||||||||||
| Gcmm4GPSGroup | 1.3.6.1.4.1.161.19.3.6.1.5 | ||||||||||||
group · current CMM4 GPS status group. | |||||||||||||
| Gcmm4ControlsGroup | 1.3.6.1.4.1.161.19.3.6.1.6 | ||||||||||||
| Gcmm4SNMPGroup | 1.3.6.1.4.1.161.19.3.6.1.7 | ||||||||||||
group · current CMM4 SNMP group.
| |||||||||||||
| Gcmm4UserTableGroup | 1.3.6.1.4.1.161.19.3.6.1.8 | ||||||||||||
group · current CMM4 User Information Table group.
| |||||||||||||
| Ncmm4Config | 1.3.6.1.4.1.161.19.3.6.2 | ||||||||||||
| SgpsTimingPulse | 1.3.6.1.4.1.161.19.3.6.2.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current (1) -- Master. (0) -- Slave.
| |||||||||||||
| Slan1Ip | 1.3.6.1.4.1.161.19.3.6.2.2 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current LAN 1 IP address | |||||||||||||
| Slan1SubnetMask | 1.3.6.1.4.1.161.19.3.6.2.3 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current LAN 1 subnet mask. | |||||||||||||
| SdefaultGateway | 1.3.6.1.4.1.161.19.3.6.2.4 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Default gateway | |||||||||||||
| Scmm4WebAutoUpdate | 1.3.6.1.4.1.161.19.3.6.2.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Web page auto update in seconds. 0 means disabled.
| |||||||||||||
| Scmm4ExtEthPowerReset | 1.3.6.1.4.1.161.19.3.6.2.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Resets power to external ethernet switch. (0) Reset Complete. (1) Reset Switch.
| |||||||||||||
| Tcmm4PortCfgTable | 1.3.6.1.4.1.161.19.3.6.2.7 | NA | |||||||||||
table · not-accessible · current A list of CMM 4 port configuration entries. | |||||||||||||
| Rcmm4PortCfgEntry | 1.3.6.1.4.1.161.19.3.6.2.7.1 | NA | |||||||||||
row · not-accessible · current A CMM4 port entry containing objects with port status.
| |||||||||||||
| CportCfgIndex | 1.3.6.1.4.1.161.19.3.6.2.7.1.1 | INTEGER (1..8) | RO | ||||||||||
column · INTEGER (1..8) · read-only · current A unique value for each CMM port. | |||||||||||||
| Ccmm4PortText | 1.3.6.1.4.1.161.19.3.6.2.7.1.2 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Port Description. | |||||||||||||
| Ccmm4PortDevType | 1.3.6.1.4.1.161.19.3.6.2.7.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Type of Device configured for each port.
| |||||||||||||
| Ccmm4PortPowerCfg | 1.3.6.1.4.1.161.19.3.6.2.7.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Port power status indicates power on or power off.
| |||||||||||||
| Ccmm4PortResetCfg | 1.3.6.1.4.1.161.19.3.6.2.7.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Reset power to port if and only if port is currently powered.
| |||||||||||||
| Scmm4IpAccessFilter | 1.3.6.1.4.1.161.19.3.6.2.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current IP Access filtering. (0) Filtering Disabled - All IPs will be allowed access. (1) Filtering Enabled - Only allow IPs in the allowed access list.
| |||||||||||||
| Scmm4IpAccess1 | 1.3.6.1.4.1.161.19.3.6.2.9 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current IP Access list entry 1. | |||||||||||||
| Scmm4IpAccess2 | 1.3.6.1.4.1.161.19.3.6.2.10 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current IP Access list entry 2. | |||||||||||||
| Scmm4IpAccess3 | 1.3.6.1.4.1.161.19.3.6.2.11 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current IP Access list entry 3. | |||||||||||||
| Scmm4MgmtPortSpeed | 1.3.6.1.4.1.161.19.3.6.2.12 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Management Port Speed Configuration. (1) autoNegotiate - Auto negotiate to best speed and duplex setting. (2) force10Half - Set port to 10 Mbit/s half-duplex. (3) force10Full - Set port to 10 Mbit/s full-duplex. (4) force100Half - Set port to 100 Mbit/s half-duplex. (5) force100Full - Set port to 100 Mbit/s full-duplex.
| |||||||||||||
| Scmm4NTPServerIp | 1.3.6.1.4.1.161.19.3.6.2.13 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current IP address for NTP server for CMM4 GPS Slave. | |||||||||||||
| SsessionTimeout | 1.3.6.1.4.1.161.19.3.6.2.14 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Timer for Telnet, Web and FTP sessions. | |||||||||||||
| SvlanEnable | 1.3.6.1.4.1.161.19.3.6.2.15 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To enable or disable VLAN tagging
| |||||||||||||
| SmanagementVID | 1.3.6.1.4.1.161.19.3.6.2.16 | INTEGER (1..4094) | RW | ||||||||||
scalar · INTEGER (1..4094) · read-write · current Management VLAN VID | |||||||||||||
| SsiteInfoViewable | 1.3.6.1.4.1.161.19.3.6.2.17 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable non login users the ability to view Site Information
| |||||||||||||
| Ncmm4Status | 1.3.6.1.4.1.161.19.3.6.3 | ||||||||||||
| Tcmm4PortStatusTable | 1.3.6.1.4.1.161.19.3.6.3.1 | NA | |||||||||||
table · not-accessible · current A list of Live CMM 4 port status entries. | |||||||||||||
| Rcmm4PortStatusEntry | 1.3.6.1.4.1.161.19.3.6.3.1.1 | NA | |||||||||||
| CportStatusIndex | 1.3.6.1.4.1.161.19.3.6.3.1.1.1 | INTEGER (1..8) | RO | ||||||||||
column · INTEGER (1..8) · read-only · current A unique value for each CMM port. | |||||||||||||
| Ccmm4PortPowerStatus | 1.3.6.1.4.1.161.19.3.6.3.1.1.4 | INTEGER | RO | on(1) | |||||||||
| SdeviceType | 1.3.6.1.4.1.161.19.3.6.3.2 | DisplayString | RO | "CMM4 0a-00-3e-e8-12-20" | |||||||||
scalar · DisplayString · read-only · current A textual string containing information about device type. Example values from LibreNMS test devices
| |||||||||||||
| Scmm4pldVersion | 1.3.6.1.4.1.161.19.3.6.3.3 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Version of CMM4 PLD code. | |||||||||||||
| Scmm4SoftwareVersion | 1.3.6.1.4.1.161.19.3.6.3.4 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CMM4 software version. It includes the operating system and software build time. | |||||||||||||
| Scmm4SystemTime | 1.3.6.1.4.1.161.19.3.6.3.5 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The current time. | |||||||||||||
| Scmm4UpTime | 1.3.6.1.4.1.161.19.3.6.3.6 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Time since last system reboot. | |||||||||||||
| SsatellitesVisible | 1.3.6.1.4.1.161.19.3.6.3.7 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Number of satellites the GPS sees. | |||||||||||||
| SsatellitesTracked | 1.3.6.1.4.1.161.19.3.6.3.8 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Current number of satellites that GPS actually tracks. | |||||||||||||
| Slatitude | 1.3.6.1.4.1.161.19.3.6.3.9 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CMM4 latitude. | |||||||||||||
| Slongitude | 1.3.6.1.4.1.161.19.3.6.3.10 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CMM4 longitude. | |||||||||||||
| Sheight | 1.3.6.1.4.1.161.19.3.6.3.11 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The height of CMM4 unit. | |||||||||||||
| StrackingMode | 1.3.6.1.4.1.161.19.3.6.3.12 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CMM4 GPS tracking mode. | |||||||||||||
| SsyncStatus | 1.3.6.1.4.1.161.19.3.6.3.13 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CMM4 GPS sync pulse status. | |||||||||||||
| Scmm4MacAddress | 1.3.6.1.4.1.161.19.3.6.3.14 | WhispMACAddress | RO | ||||||||||
scalar · WhispMACAddress · read-only · current MAC address of the unit. | |||||||||||||
| Scmm4ExtEthPwrStat | 1.3.6.1.4.1.161.19.3.6.3.15 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current Live value of external Ethernet switch power.
| |||||||||||||
| Scmm4FPGAVersion | 1.3.6.1.4.1.161.19.3.6.3.16 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CMM4 FPGA Version. | |||||||||||||
| Scmm4FPGAPlatform | 1.3.6.1.4.1.161.19.3.6.3.17 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CMM4 FPGA Revision. | |||||||||||||
| SdefaultStatus | 1.3.6.1.4.1.161.19.3.6.3.18 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current Status of the Default Plug and switch. If either is active the next boot will be a default boot. 0: None, Default Plug not inserted, Default Switch not active 1: Plug inserted 2: Switch Active 3: Plug inserted and Switch active
| |||||||||||||
| Ncmm4Gps | 1.3.6.1.4.1.161.19.3.6.4 | ||||||||||||
| SgpsTrackingMode | 1.3.6.1.4.1.161.19.3.6.4.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CMM4 GPS tracking mode. | |||||||||||||
| SgpsTime | 1.3.6.1.4.1.161.19.3.6.4.2 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CMM4 GPS time. | |||||||||||||
| SgpsDate | 1.3.6.1.4.1.161.19.3.6.4.3 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CMM4 GPS date. | |||||||||||||
| SgpsSatellitesVisible | 1.3.6.1.4.1.161.19.3.6.4.4 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Number of satellites the GPS sees | |||||||||||||
| SgpsSatellitesTracked | 1.3.6.1.4.1.161.19.3.6.4.5 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Current number of satellites GPS is tracking. | |||||||||||||
| SgpsHeight | 1.3.6.1.4.1.161.19.3.6.4.6 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CMM4 height. | |||||||||||||
| SgpsAntennaConnection | 1.3.6.1.4.1.161.19.3.6.4.7 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Antenna Connection status. | |||||||||||||
| SgpsLatitude | 1.3.6.1.4.1.161.19.3.6.4.8 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CMM4 Latitude. | |||||||||||||
| SgpsLongitude | 1.3.6.1.4.1.161.19.3.6.4.9 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CMM4 longitude. | |||||||||||||
| SgpsInvalidMsg | 1.3.6.1.4.1.161.19.3.6.4.10 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Number of invalid messages. | |||||||||||||
| SgpsRestartCount | 1.3.6.1.4.1.161.19.3.6.4.11 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of unit restarts. | |||||||||||||
| SgpsReceiverInfo | 1.3.6.1.4.1.161.19.3.6.4.12 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current A textual string contains information on GPS receiver. | |||||||||||||
| SgpsSyncStatus | 1.3.6.1.4.1.161.19.3.6.4.13 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current Live value of GPS Sync Status.
| |||||||||||||
| SgpsSyncMasterSlave | 1.3.6.1.4.1.161.19.3.6.4.14 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current Live value of GPS Sync Master/Slave Setting.
| |||||||||||||
| SgpsLog | 1.3.6.1.4.1.161.19.3.6.4.15 | EventString | RO | ||||||||||
scalar · EventString · read-only · current GPS log. Includes times of sync detected and sync lost. | |||||||||||||
| SgpsReInitCount | 1.3.6.1.4.1.161.19.3.6.4.16 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current GPS ReInit counts. The number of times we have done a complete re-initialization of the GPS device. | |||||||||||||
| Ncmm4EventLog | 1.3.6.1.4.1.161.19.3.6.5 | ||||||||||||
| SeventLog | 1.3.6.1.4.1.161.19.3.6.5.1 | EventString | RO | ||||||||||
scalar · EventString · read-only · current CMM4 Event log. | |||||||||||||
| SntpLog | 1.3.6.1.4.1.161.19.3.6.5.2 | EventString | RO | ||||||||||
scalar · EventString · read-only · current CMM4 NTP Log | |||||||||||||
| Ncmm4Controls | 1.3.6.1.4.1.161.19.3.6.6 | ||||||||||||
| Scmm4Reboot | 1.3.6.1.4.1.161.19.3.6.6.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting the variable to 1 will reboot the unit. When the unit finishes rebooting, it will be in finishedReboot state.
| |||||||||||||
| Scmm4ClearEventLog | 1.3.6.1.4.1.161.19.3.6.6.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting the variable to 1 will clear the event log.
| |||||||||||||
| Scmm4RebootIfRequired | 1.3.6.1.4.1.161.19.3.6.6.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting this to 1 will reboot the CMM4 IF and ONLY IF it is required due to configuration updates. If a reboot is NOT required, setting this value to 1 will have no affect. If a reboot IS required, setting this value to 1 will reboot the CMM. Writing 0 has no affect.
| |||||||||||||
| Ncmm4Snmp | 1.3.6.1.4.1.161.19.3.6.7 | ||||||||||||
| Scmm4SnmpComString | 1.3.6.1.4.1.161.19.3.6.7.1 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Community String | |||||||||||||
| Scmm4SnmpAccessSubnet | 1.3.6.1.4.1.161.19.3.6.7.2 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Accessing Subnet. In x.x.x.x/y form where x.x.x.x is network and y is mask length. | |||||||||||||
| Scmm4SnmpTrapIp1 | 1.3.6.1.4.1.161.19.3.6.7.3 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current SNMP Trap IP 1. | |||||||||||||
| Scmm4SnmpTrapIp2 | 1.3.6.1.4.1.161.19.3.6.7.4 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current SNMP Trap IP 2. | |||||||||||||
| Scmm4SnmpTrapIp3 | 1.3.6.1.4.1.161.19.3.6.7.5 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current SNMP Trap IP 3. | |||||||||||||
| Scmm4SnmpTrapIp4 | 1.3.6.1.4.1.161.19.3.6.7.6 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current SNMP Trap IP 4. | |||||||||||||
| Scmm4SnmpTrapIp5 | 1.3.6.1.4.1.161.19.3.6.7.7 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current SNMP Trap IP 5. | |||||||||||||
| Scmm4SnmpTrapIp6 | 1.3.6.1.4.1.161.19.3.6.7.8 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current SNMP Trap IP 6. | |||||||||||||
| Scmm4SnmpTrapIp7 | 1.3.6.1.4.1.161.19.3.6.7.9 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current SNMP Trap IP 7. | |||||||||||||
| Scmm4SnmpTrapIp8 | 1.3.6.1.4.1.161.19.3.6.7.10 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current SNMP Trap IP 8. | |||||||||||||
| Scmm4SnmpTrapIp9 | 1.3.6.1.4.1.161.19.3.6.7.11 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current SNMP Trap IP 9. | |||||||||||||
| Scmm4SnmpTrapIp10 | 1.3.6.1.4.1.161.19.3.6.7.12 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current SNMP Trap IP 10. | |||||||||||||
| Scmm4SnmpReadOnly | 1.3.6.1.4.1.161.19.3.6.7.13 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current SNMP Permissions 1 - Read Only 0 - Read/Write.
| |||||||||||||
| Scmm4SnmpGPSSyncTrapEnable | 1.3.6.1.4.1.161.19.3.6.7.14 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Variable to enable/disable GPS sync/out-sync traps.
| |||||||||||||
| Scmm4SnmpAccessSubnet2 | 1.3.6.1.4.1.161.19.3.6.7.15 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Accessing Subnet 2. In x.x.x.x/y form where x.x.x.x is network and y is mask length. | |||||||||||||
| Scmm4SnmpAccessSubnet3 | 1.3.6.1.4.1.161.19.3.6.7.16 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Accessing Subnet 3. In x.x.x.x/y form where x.x.x.x is network and y is mask length. | |||||||||||||
| Scmm4SnmpAccessSubnet4 | 1.3.6.1.4.1.161.19.3.6.7.17 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Accessing Subnet 4. In x.x.x.x/y form where x.x.x.x is network and y is mask length. | |||||||||||||
| Scmm4SnmpAccessSubnet5 | 1.3.6.1.4.1.161.19.3.6.7.18 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Accessing Subnet 5. In x.x.x.x/y form where x.x.x.x is network and y is mask length. | |||||||||||||
| Scmm4SnmpAccessSubnet6 | 1.3.6.1.4.1.161.19.3.6.7.19 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Accessing Subnet 6. In x.x.x.x/y form where x.x.x.x is network and y is mask length. | |||||||||||||
| Scmm4SnmpAccessSubnet7 | 1.3.6.1.4.1.161.19.3.6.7.20 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Accessing Subnet 7. In x.x.x.x/y form where x.x.x.x is network and y is mask length. | |||||||||||||
| Scmm4SnmpAccessSubnet8 | 1.3.6.1.4.1.161.19.3.6.7.21 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Accessing Subnet 8. In x.x.x.x/y form where x.x.x.x is network and y is mask length. | |||||||||||||
| Scmm4SnmpAccessSubnet9 | 1.3.6.1.4.1.161.19.3.6.7.22 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Accessing Subnet 9. In x.x.x.x/y form where x.x.x.x is network and y is mask length. | |||||||||||||
| Scmm4SnmpAccessSubnet10 | 1.3.6.1.4.1.161.19.3.6.7.23 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Accessing Subnet 10. In x.x.x.x/y form where x.x.x.x is network and y is mask length. | |||||||||||||
| Ncmm4Event | 1.3.6.1.4.1.161.19.3.6.8 | ||||||||||||
| Ncmm4GPSEvent | 1.3.6.1.4.1.161.19.3.6.8.1 | ||||||||||||
| !cmm4GPSInSync | 1.3.6.1.4.1.161.19.3.6.8.1.1 | ||||||||||||
notification · current Signals a transition from No Sync to Sync OK.
| |||||||||||||
| !cmm4GPSNoSync | 1.3.6.1.4.1.161.19.3.6.8.1.2 | ||||||||||||
notification · current Signals a transition from Sync OK to No Sync.
| |||||||||||||
| Tcmm4UserTable | 1.3.6.1.4.1.161.19.3.6.9 | NA | |||||||||||
table · not-accessible · current User information table. | |||||||||||||
| Rcmm4UserEntry | 1.3.6.1.4.1.161.19.3.6.9.1 | NA | |||||||||||
| CentryIndex | 1.3.6.1.4.1.161.19.3.6.9.1.1 | INTEGER (1..5) | RO | ||||||||||
column · INTEGER (1..5) · read-only · current User information table index. | |||||||||||||
| CuserLoginName | 1.3.6.1.4.1.161.19.3.6.9.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current User name. | |||||||||||||
| CuserPswd | 1.3.6.1.4.1.161.19.3.6.9.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current User password. | |||||||||||||
| CaccessLevel | 1.3.6.1.4.1.161.19.3.6.9.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current User access level.
| |||||||||||||
Traps / Notifications
- cmm4GPSInSync
1.3.6.1.4.1.161.19.3.6.8.1.1 - cmm4GPSNoSync
1.3.6.1.4.1.161.19.3.6.8.1.2