WHISP-BOX-MIBV2-MIB
MotorolaThis module contains generic Box-Level MIB definitions for Canopy Radios.
snmptranslate -m WHISP-BOX-MIBV2-MIB -Tpsnmpwalk -v2c -c <community> -m WHISP-BOX-MIBV2-MIB <host> 1.3.6.1.4.1.161.19.1.1.8Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION |
| WHISP-GLOBAL-REG-MIB | whispBox, whispModules |
| WHISP-TCV2-MIB | EventString, WhispLUID, WhispMACAddress |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IwhispBoxLevelMibModule | 1.3.6.1.4.1.161.19.1.1.8 | ||||||||||||
identity This module contains generic Box-Level MIB definitions for Canopy Radios. | |||||||||||||
| NwhispBoxStatus | 1.3.6.1.4.1.161.19.3.3.1 | ||||||||||||
| SwhispBoxSoftwareVer | 1.3.6.1.4.1.161.19.3.3.1.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Version of software. Should be noted in the event customer has technical difficulties and need to contact technical support. | |||||||||||||
| SwhispBoxFPGAVer | 1.3.6.1.4.1.161.19.3.3.1.2 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Version of FPGA. | |||||||||||||
| SwhispBoxEsn | 1.3.6.1.4.1.161.19.3.3.1.3 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Electronic serial number(MAC address) assigned to Radio. | |||||||||||||
| SwhispBoxBoot | 1.3.6.1.4.1.161.19.3.3.1.4 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Software boot version. | |||||||||||||
| SboxTemperature | 1.3.6.1.4.1.161.19.3.3.1.5 | DisplayString | RO | obsolete | |||||||||
scalar · DisplayString · read-only · obsolete Radio temperature. | |||||||||||||
| SboxDeviceType | 1.3.6.1.4.1.161.19.3.3.1.6 | DisplayString | RO | 5.7GHz MIMO OFDM - Multipoint - Access Point | |||||||||
scalar · DisplayString · read-only · current The type of the device. | |||||||||||||
| SboxDeviceTypeID | 1.3.6.1.4.1.161.19.3.3.1.7 | DisplayString | RO | AP | |||||||||
scalar · DisplayString · read-only · current Device type ID. Example values from LibreNMS test devices
| |||||||||||||
| SboxEncryption | 1.3.6.1.4.1.161.19.3.3.1.8 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Disclaimer:
This OID remains current for backwards compatibility with external tools.
Please use boxEncryptionDetailed for more accurate info.
Pre-15.2 software - Returns device encryption configuration as follows:
AES when configured to AES.
DES when configured to DES or when encryption is not enabled.
Note that as of 15.2, DES encryption is no longer supported.
15.2 software and newer - Returns device encryption configuration as follows for AP:
AES when configured to AES.
DES when encryption is not enabled or if not capable of encryption.
15.2 software and newer - Returns device encryption capabilities as follows for SM:
Note that this only indicates encryption capabilities but it does not indicate if the device has encryption enabled.
AES if device is capable AES encryption.
DES if device is not capable of encryption. | |||||||||||||
| SetherLinkStatus | 1.3.6.1.4.1.161.19.3.3.1.9 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Ethernet link status. | |||||||||||||
| SboxFrequency | 1.3.6.1.4.1.161.19.3.3.1.10 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Frequency band of the device. | |||||||||||||
| SplatformVer | 1.3.6.1.4.1.161.19.3.3.1.11 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Hardware platform version. For internal use. | |||||||||||||
| SplatformType | 1.3.6.1.4.1.161.19.3.3.1.12 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Platform type: Canopy, Canopy Lite, Canopy Lite - Advantage, Advantage, Russian, Russian - Advantage. | |||||||||||||
| SdhcpLanIp | 1.3.6.1.4.1.161.19.3.3.1.13 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current LAN interface IP obtained through DHCP. | |||||||||||||
| SdhcpLanSubnetMask | 1.3.6.1.4.1.161.19.3.3.1.14 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current LAN interface Subnet Mask obtained through DHCP. | |||||||||||||
| SdhcpLanGateway | 1.3.6.1.4.1.161.19.3.3.1.15 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current LAN interface Gateway obtained through DHCP. | |||||||||||||
| SdhcpRfPublicIp | 1.3.6.1.4.1.161.19.3.3.1.16 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current RF Public interface IP obtained through DHCP. | |||||||||||||
| SdhcpRfPublicSubnetMask | 1.3.6.1.4.1.161.19.3.3.1.17 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current RF Public interface Subnet Mask obtained through DHCP. | |||||||||||||
| SdhcpRfPublicGateway | 1.3.6.1.4.1.161.19.3.3.1.18 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current RF Public interface Gateway obtained through DHCP. | |||||||||||||
| SlanDhcpStatus | 1.3.6.1.4.1.161.19.3.3.1.19 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Display LAN interface current DHPC status. | |||||||||||||
| SrfPublicDhcpStatus | 1.3.6.1.4.1.161.19.3.3.1.20 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Display RF Public interface current DHPC status. | |||||||||||||
| SinSyncCount | 1.3.6.1.4.1.161.19.3.3.1.21 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Counter for number of In Synchronization. | |||||||||||||
| SoutSyncCount | 1.3.6.1.4.1.161.19.3.3.1.22 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Counter for number of Out of Synchronization. | |||||||||||||
| SpllOutLockCount | 1.3.6.1.4.1.161.19.3.3.1.23 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Counter for number of PLL out of Lock. | |||||||||||||
| StxCalFailure | 1.3.6.1.4.1.161.19.3.3.1.24 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Counter for number of TX Calibration failure. | |||||||||||||
| SswVersion | 1.3.6.1.4.1.161.19.3.3.1.25 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Software version information. | |||||||||||||
| SpldVersion | 1.3.6.1.4.1.161.19.3.3.1.26 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current PLD version information. Only applicable on P10 and P12 platforms. | |||||||||||||
| SplatformInfo | 1.3.6.1.4.1.161.19.3.3.1.27 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Platform information. | |||||||||||||
| SantPolarization | 1.3.6.1.4.1.161.19.3.3.1.28 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Antenna polarization for FSK radios. | |||||||||||||
| SpacketOverloadCounter | 1.3.6.1.4.1.161.19.3.3.1.29 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Total packet overload count. | |||||||||||||
| SwhispBoxP11Personality | 1.3.6.1.4.1.161.19.3.3.1.30 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Board Personality Configuration | |||||||||||||
| SwhispBoxP11FPGAType | 1.3.6.1.4.1.161.19.3.3.1.31 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current FPGA Type | |||||||||||||
| SwhispBoxP11BstrapFPGAVer | 1.3.6.1.4.1.161.19.3.3.1.32 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current P11 Bootstrap FPGA Version. | |||||||||||||
| SnumDFSDetections | 1.3.6.1.4.1.161.19.3.3.1.33 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of DFS Detections since last boot. | |||||||||||||
| SrxOverrunPkts | 1.3.6.1.4.1.161.19.3.3.1.34 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Counter for number of received overrun packets error. | |||||||||||||
| SboxTemperatureC | 1.3.6.1.4.1.161.19.3.3.1.35 | INTEGER | RO | 20 | |||||||||
| SboxTemperatureF | 1.3.6.1.4.1.161.19.3.3.1.36 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Radio temperature in Fahrenheit. | |||||||||||||
| SbridgeCbFecStatbin | 1.3.6.1.4.1.161.19.3.3.1.37 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB FEC Stats bin | |||||||||||||
| SbridgeCbFecStatbout | 1.3.6.1.4.1.161.19.3.3.1.38 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB FEC Stats bout | |||||||||||||
| SbridgeCbFecStatbtoss | 1.3.6.1.4.1.161.19.3.3.1.39 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB FEC Stats btoss | |||||||||||||
| SbridgeCbFecStatbtosscap | 1.3.6.1.4.1.161.19.3.3.1.40 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB FEC Stats btosscap | |||||||||||||
| SbridgeCbFecStatuin | 1.3.6.1.4.1.161.19.3.3.1.41 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB FEC Stats uin | |||||||||||||
| SbridgeCbFecStatuout | 1.3.6.1.4.1.161.19.3.3.1.42 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB FEC Stats uout | |||||||||||||
| SbridgeCbFecStatutoss | 1.3.6.1.4.1.161.19.3.3.1.43 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB FEC Stats utoss | |||||||||||||
| SbridgeCbFecStatutosscap | 1.3.6.1.4.1.161.19.3.3.1.44 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB FEC Stats utosscap | |||||||||||||
| SbridgeCbRFStatbin | 1.3.6.1.4.1.161.19.3.3.1.45 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB RF Stats bin | |||||||||||||
| SbridgeCbRFStatbout | 1.3.6.1.4.1.161.19.3.3.1.46 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB RF Stats bout | |||||||||||||
| SbridgeCbRFStatbtoss | 1.3.6.1.4.1.161.19.3.3.1.47 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB RF Stats btoss | |||||||||||||
| SbridgeCbRFStatbtosscap | 1.3.6.1.4.1.161.19.3.3.1.48 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB RF Stats btosscap | |||||||||||||
| SbridgeCbRFStatuin | 1.3.6.1.4.1.161.19.3.3.1.49 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB RF Stats uin | |||||||||||||
| SbridgeCbRFStatuout | 1.3.6.1.4.1.161.19.3.3.1.50 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB RF Stats uout | |||||||||||||
| SbridgeCbRFStatutoss | 1.3.6.1.4.1.161.19.3.3.1.51 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB RF Stats utoss | |||||||||||||
| SbridgeCbRFStatutosscap | 1.3.6.1.4.1.161.19.3.3.1.52 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB RF Stats utosscap | |||||||||||||
| SbridgeCbErrStatNI1QSend | 1.3.6.1.4.1.161.19.3.3.1.53 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB Error Stats ErrNI1QSend | |||||||||||||
| SbridgeCbErrStatNI2QSend | 1.3.6.1.4.1.161.19.3.3.1.54 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB Error Stats ErrNI2QSend | |||||||||||||
| SbridgeCbErrStatBridgeFull | 1.3.6.1.4.1.161.19.3.3.1.55 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB Error Stats BridgeFull | |||||||||||||
| SbridgeCbErrStatSendMsg | 1.3.6.1.4.1.161.19.3.3.1.56 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB Error Stats SendMsg | |||||||||||||
| SbridgeCbErrStatAPFecQSend | 1.3.6.1.4.1.161.19.3.3.1.57 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB Error Stats APFecQSend | |||||||||||||
| SbridgeCbErrStatApRfQSend | 1.3.6.1.4.1.161.19.3.3.1.58 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB Error Stats ApRfQSend | |||||||||||||
| SrfStatXmtUDataCnt | 1.3.6.1.4.1.161.19.3.3.1.59 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Transmit Unicast Data Count | |||||||||||||
| SrfStatXmtBDataCnt | 1.3.6.1.4.1.161.19.3.3.1.60 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Transmit Broadcast Data Count | |||||||||||||
| SrfStatRcvUDataCnt | 1.3.6.1.4.1.161.19.3.3.1.61 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Receive Unicast Data Count | |||||||||||||
| SrfStatRcvBDataCnt | 1.3.6.1.4.1.161.19.3.3.1.62 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Receive Broadcast Data Count | |||||||||||||
| SrfStatXmtCntlCnt | 1.3.6.1.4.1.161.19.3.3.1.63 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Transmit Control Count | |||||||||||||
| SrfStatRcvCntlCnt | 1.3.6.1.4.1.161.19.3.3.1.64 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Receive Control Count | |||||||||||||
| SrfStatInSyncCount | 1.3.6.1.4.1.161.19.3.3.1.65 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats In Sync Count | |||||||||||||
| SrfStatOutSyncCount | 1.3.6.1.4.1.161.19.3.3.1.66 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Out Sync Count | |||||||||||||
| SrfStatOverrunCount | 1.3.6.1.4.1.161.19.3.3.1.67 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Overrun Count | |||||||||||||
| SrfStatUnderrunCount | 1.3.6.1.4.1.161.19.3.3.1.68 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Underrun Count | |||||||||||||
| SrfStatRcvCorruptDataCount | 1.3.6.1.4.1.161.19.3.3.1.69 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Receive Corrupt Data Count | |||||||||||||
| SrfStatBadBcastCtlCnt | 1.3.6.1.4.1.161.19.3.3.1.70 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Bad Broadcast Control Count | |||||||||||||
| SrfStatPLLOutOfLockCnt | 1.3.6.1.4.1.161.19.3.3.1.71 | Counter32 | RO | deprecated | |||||||||
scalar · Counter32 · read-only · deprecated RF Scheduler Stats PLL Out of Lock Count | |||||||||||||
| SrfStatBeaconVerMismatchCnt | 1.3.6.1.4.1.161.19.3.3.1.72 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Beacon version mismatch count Count of the beacons where the version in the beacon mismatched and prevented registration. | |||||||||||||
| SrfStatBadFreqBcnRcvCnt | 1.3.6.1.4.1.161.19.3.3.1.73 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Wrong Frequency Beacon Received Count Count of beacons that was reported on a different frequency than was received. | |||||||||||||
| SrfStatnonLiteBcnRcvCnt | 1.3.6.1.4.1.161.19.3.3.1.74 | Counter32 | RO | deprecated | |||||||||
scalar · Counter32 · read-only · deprecated RF Scheduler Stats Non Lite Beacon Received Count This stat is not applicable on the 450 platform. | |||||||||||||
| SrfStatUnsupFeatBcnRcvCnt | 1.3.6.1.4.1.161.19.3.3.1.75 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Unsupported Feature Beacon Received Count Count of beacons that the SM has received that is from a beacon that is running a feature this radio does not support, which will prevent registration. If this stat is encountered, upgrade the device to the latest supported software version. | |||||||||||||
| SrfStatUnkwnFeatBcnRcvCnt | 1.3.6.1.4.1.161.19.3.3.1.76 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Unknown Feature Beacon Received Count Count of beacons that the SM has received that is from a beacon that is running a feature that is unknown, which will prevent registration. If this stat is encountered, upgrade the device to the latest supported software version. | |||||||||||||
| SrfStatTxCalFailCnt | 1.3.6.1.4.1.161.19.3.3.1.77 | Counter32 | RO | deprecated | |||||||||
scalar · Counter32 · read-only · deprecated RF Scheduler Stats TX Calibration Failures Count | |||||||||||||
| SrfStatBadInSyncIDRcv | 1.3.6.1.4.1.161.19.3.3.1.78 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Bad In Sync ID Received Count | |||||||||||||
| SrfStatTempOutOfRange | 1.3.6.1.4.1.161.19.3.3.1.79 | Counter32 | RO | deprecated | |||||||||
scalar · Counter32 · read-only · deprecated RF Scheduler Stats Temperature Out of Range Count | |||||||||||||
| SrfStatRSSIOutOfRange | 1.3.6.1.4.1.161.19.3.3.1.80 | Counter32 | RO | deprecated | |||||||||
scalar · Counter32 · read-only · deprecated RF Scheduler Stats RSSI Out of Range Count | |||||||||||||
| SrfStatRangeCapEnf | 1.3.6.1.4.1.161.19.3.3.1.81 | Counter32 | RO | deprecated | |||||||||
scalar · Counter32 · read-only · deprecated RF Scheduler Stats Range Cap Enforced Count | |||||||||||||
| SrfStatRcvLTStart | 1.3.6.1.4.1.161.19.3.3.1.82 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Rcv LT Start Count | |||||||||||||
| SrfStatRcvLTStartHS | 1.3.6.1.4.1.161.19.3.3.1.83 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Rcv LT Start HS Count | |||||||||||||
| SrfStatRcvLTResult | 1.3.6.1.4.1.161.19.3.3.1.84 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Rcv LT Result Count | |||||||||||||
| SrfStatXmtLTResult | 1.3.6.1.4.1.161.19.3.3.1.85 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Xmt LT Result Count | |||||||||||||
| SwhispFeatureKeyOrigin | 1.3.6.1.4.1.161.19.3.3.1.86 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Origin of Feature Key which includes GMT time and location of the Key programming (if time is 0 the key was converted locally) | |||||||||||||
| SradioMSN | 1.3.6.1.4.1.161.19.3.3.1.87 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current MSN of the radio. | |||||||||||||
| SupdateStatus | 1.3.6.1.4.1.161.19.3.3.1.88 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current Status of Device Update | |||||||||||||
| SsyslogStatTxSuccesses | 1.3.6.1.4.1.161.19.3.3.1.89 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The count of Syslog messages sent to UDP layer. | |||||||||||||
| SsyslogStatDropped | 1.3.6.1.4.1.161.19.3.3.1.90 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of dropped syslog messages due to device overload and/or resource limitations. | |||||||||||||
| SfecStatLinkLost | 1.3.6.1.4.1.161.19.3.3.1.91 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Ethernet link lost count | |||||||||||||
| SfecStatLinkDetected | 1.3.6.1.4.1.161.19.3.3.1.92 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Ethernet link detected count | |||||||||||||
| SnatDhcpStatus | 1.3.6.1.4.1.161.19.3.3.1.93 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Display NAT Public interface current DHPC status. | |||||||||||||
| SfecInDiscardsCount | 1.3.6.1.4.1.161.19.3.3.1.94 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Ethernet in discards count. | |||||||||||||
| SfecInErrorsCount | 1.3.6.1.4.1.161.19.3.3.1.95 | Unsigned32 | RO | 0 | |||||||||
| SfecOutDiscardsCount | 1.3.6.1.4.1.161.19.3.3.1.96 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Ethernet out discards count. | |||||||||||||
| SfecOutErrorsCount | 1.3.6.1.4.1.161.19.3.3.1.97 | Unsigned32 | RO | 2 | |||||||||
| SrfInDiscardsCount | 1.3.6.1.4.1.161.19.3.3.1.98 | Unsigned32 | RO | deprecated | |||||||||
scalar · Unsigned32 · read-only · deprecated RF in discards count. This attribute is deprecated. Use rfInDiscardsCountExt instead. | |||||||||||||
| SrfInErrorsCount | 1.3.6.1.4.1.161.19.3.3.1.99 | Unsigned32 | RO | deprecated | |||||||||
scalar · Unsigned32 · read-only · deprecated RF in errors count. This attribute is deprecated. Use rfInErrorsCountExt instead. | |||||||||||||
| SrfOutDiscardsCount | 1.3.6.1.4.1.161.19.3.3.1.100 | Unsigned32 | RO | deprecated | |||||||||
scalar · Unsigned32 · read-only · deprecated RF out discards count. This attribute is deprecated. Use rfOutDiscardsCountExt instead. | |||||||||||||
| SrfOutErrorsCount | 1.3.6.1.4.1.161.19.3.3.1.101 | Unsigned32 | RO | deprecated | |||||||||
scalar · Unsigned32 · read-only · deprecated RF out errors count. This attribute is deprecated. Use rfOutErrorsCountExt instead. | |||||||||||||
| SfecInDiscardsOverloadCount | 1.3.6.1.4.1.161.19.3.3.1.102 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Ethernet in discards overload. | |||||||||||||
| SfecOutDiscardsOverloadCount | 1.3.6.1.4.1.161.19.3.3.1.103 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Ethernet out discards overload. | |||||||||||||
| SrfInDiscardsOverloadCount | 1.3.6.1.4.1.161.19.3.3.1.104 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Rf in discards overload. | |||||||||||||
| SrfOutDiscardsOverloadCount | 1.3.6.1.4.1.161.19.3.3.1.105 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Rf out discards overload. | |||||||||||||
| SfpgaCompileInfo | 1.3.6.1.4.1.161.19.3.3.1.106 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Display the fpga compiled attributes. (Engineering Only) | |||||||||||||
| SfpgaBuildDate | 1.3.6.1.4.1.161.19.3.3.1.107 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Display the entire fpga build date string. (Engineering Only) | |||||||||||||
| SaggregateBandwidthCap | 1.3.6.1.4.1.161.19.3.3.1.108 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The maximum aggregate (uplink + downlink) the radio is capable of. | |||||||||||||
| ScalibrationStatusBool | 1.3.6.1.4.1.161.19.3.3.1.109 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Boolean OID to show if device is calibrated. Applicable to FSK and MIMO radios only.
| |||||||||||||
| ScalibrationStatusBox | 1.3.6.1.4.1.161.19.3.3.1.110 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current String to show if radio is calibrated. Applicable to FSK and MIMO radios only. | |||||||||||||
| SradioEngKeyed | 1.3.6.1.4.1.161.19.3.3.1.111 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This will be set either as 0 if the engineering key patch is not applied to the radio or 1 if it is applied. | |||||||||||||
| SbridgeCbFecStatfloods | 1.3.6.1.4.1.161.19.3.3.1.112 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB FEC Stats Floods (Multipoint AP only) | |||||||||||||
| SbridgeCbRFStatfloods | 1.3.6.1.4.1.161.19.3.3.1.113 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB RF Stats Floods (Multipoint AP only) | |||||||||||||
| ScatalinaGainRxCH1 | 1.3.6.1.4.1.161.19.3.3.1.114 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Rcv Gain on Catalina Rx CH1. Engineering use only. | |||||||||||||
| ScatalinaGainRxCH2 | 1.3.6.1.4.1.161.19.3.3.1.115 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Rcv Gain on Catalina Rx CH2. Engineering use only. | |||||||||||||
| SantType | 1.3.6.1.4.1.161.19.3.3.1.116 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Indicates whether the antenna is integrated or external (connectorized).
| |||||||||||||
| SrfStatRcvCorruptControlCount | 1.3.6.1.4.1.161.19.3.3.1.117 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Receive Corrupt Control Data Count | |||||||||||||
| SnumLBTDetections | 1.3.6.1.4.1.161.19.3.3.1.118 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of LBT Detections since last boot. | |||||||||||||
| SbridgeCbEthAuxStatbin | 1.3.6.1.4.1.161.19.3.3.1.119 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB Eth Aux Stats bin | |||||||||||||
| SbridgeCbEthAuxStatbout | 1.3.6.1.4.1.161.19.3.3.1.120 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB Eth Aux Stats bout | |||||||||||||
| ScatalinaAttenTxCH1 | 1.3.6.1.4.1.161.19.3.3.1.121 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Attenuation on Catalina Tx CH1. Engineering Use Only. | |||||||||||||
| ScatalinaAttenTxCH2 | 1.3.6.1.4.1.161.19.3.3.1.122 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Attenuation on Catalina Tx CH2. Engineering use only. | |||||||||||||
| ScatalinaCurrDetSetpointTxCH1 | 1.3.6.1.4.1.161.19.3.3.1.123 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current Detector Setpoint on Catalina Tx CH1. Engineering Use Only. | |||||||||||||
| ScatalinaCurrDetSetpointTxCH2 | 1.3.6.1.4.1.161.19.3.3.1.124 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current Detector Setpoint on Catalina Tx CH2. Engineering use only. | |||||||||||||
| ScatalinaCurrDetReadRefTxCH1 | 1.3.6.1.4.1.161.19.3.3.1.125 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current Detector Reference on Catalina Tx CH1. Engineering Use Only. | |||||||||||||
| ScatalinaCurrDetReadRefTxCH2 | 1.3.6.1.4.1.161.19.3.3.1.126 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current Detector Reference on Catalina Tx CH2. Engineering use only. | |||||||||||||
| ScatalinaCurrDetReadPowerOnTxCH1 | 1.3.6.1.4.1.161.19.3.3.1.127 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current Detector PowerOn on Catalina Tx CH1. Engineering Use Only. | |||||||||||||
| ScatalinaCurrDetReadPowerOnTxCH2 | 1.3.6.1.4.1.161.19.3.3.1.128 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current Detector PowerOn on Catalina Tx CH2. Engineering use only. | |||||||||||||
| ScatalinaOpenLoopAttenTxCH1 | 1.3.6.1.4.1.161.19.3.3.1.129 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Open Loop Attenuation on Catalina Tx CH1. Engineering Use Only. | |||||||||||||
| ScatalinaOpenLoopAttenTxCH2 | 1.3.6.1.4.1.161.19.3.3.1.130 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Open Loop Attenuation on Catalina Tx CH2. Engineering use only. | |||||||||||||
| ScatalinaTargetDetSetpointTxCH1 | 1.3.6.1.4.1.161.19.3.3.1.131 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Target Detector Setpoint on Catalina Tx CH1. Engineering Use Only. | |||||||||||||
| ScatalinaTargetDetSetpointTxCH2 | 1.3.6.1.4.1.161.19.3.3.1.132 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Target Detector Setpoint on Catalina Tx CH2. Engineering use only. | |||||||||||||
| ScatalinaGainReductionRxCH1 | 1.3.6.1.4.1.161.19.3.3.1.133 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Gain Reduction on Catalina Rx CH1. Engineering Use Only. | |||||||||||||
| ScatalinaGainReductionRxCH2 | 1.3.6.1.4.1.161.19.3.3.1.134 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Gain Reduction on Catalina Rx CH2. Engineering use only. | |||||||||||||
| ScatalinaLoAttenRxCH1 | 1.3.6.1.4.1.161.19.3.3.1.135 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Lo Attenuation on Catalina Rx CH1. Engineering Use Only. | |||||||||||||
| ScatalinaLoAttenRxCH2 | 1.3.6.1.4.1.161.19.3.3.1.136 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Lo Attenuation on Catalina Rx CH2. Engineering use only. | |||||||||||||
| ScatalinaTargetGainRxCH1 | 1.3.6.1.4.1.161.19.3.3.1.137 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Target Gain on Catalina Rx CH1. Engineering Use Only. | |||||||||||||
| ScatalinaTargetGainRxCH2 | 1.3.6.1.4.1.161.19.3.3.1.138 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Target Gain on Catalina Rx CH2. Engineering use only. | |||||||||||||
| SbridgeCbEthAuxStatfloods | 1.3.6.1.4.1.161.19.3.3.1.139 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB Eth Aux Stats Floods (Multipoint AP only) | |||||||||||||
| SbridgeCbEthAuxStatbtoss | 1.3.6.1.4.1.161.19.3.3.1.141 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB Eth Aux Stats btoss | |||||||||||||
| SbridgeCbEthAuxStatbtosscap | 1.3.6.1.4.1.161.19.3.3.1.142 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB Eth Aux Stats btosscap | |||||||||||||
| SbridgeCbEthAuxStatuin | 1.3.6.1.4.1.161.19.3.3.1.143 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB Eth Aux Stats uin | |||||||||||||
| SbridgeCbEthAuxStatuout | 1.3.6.1.4.1.161.19.3.3.1.144 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB Eth Aux Stats uout | |||||||||||||
| SbridgeCbEthAuxStatutoss | 1.3.6.1.4.1.161.19.3.3.1.145 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB Eth Aux Stats utoss | |||||||||||||
| SbridgeCbEthAuxStatutosscap | 1.3.6.1.4.1.161.19.3.3.1.146 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB Eth Aux Stats utosscap | |||||||||||||
| SradioWatchDogLogged | 1.3.6.1.4.1.161.19.3.3.1.147 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This will be set either as 0 if there is no watchdog event logged or 1 if there is. | |||||||||||||
| SradioFatalErrorLogged | 1.3.6.1.4.1.161.19.3.3.1.148 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This will be set either as 0 if there is no fatalerror event logged or 1 if there is. | |||||||||||||
| SfecStatLinkUptime | 1.3.6.1.4.1.161.19.3.3.1.149 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Uptime of Main Ethernet link in seconds | |||||||||||||
| SfecAuxStatLinkUptime | 1.3.6.1.4.1.161.19.3.3.1.150 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Uptime of 450i/450m Aux Ethernet link in seconds | |||||||||||||
| SrfStatXmtMDataCnt | 1.3.6.1.4.1.161.19.3.3.1.217 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Transmit Multicast Data Count | |||||||||||||
| SrfStatRcvMDataCnt | 1.3.6.1.4.1.161.19.3.3.1.218 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Receive Multicast Data Count | |||||||||||||
| SfecStatUnderSizedToss | 1.3.6.1.4.1.161.19.3.3.1.219 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Undersized Toss Count | |||||||||||||
| SfecRxBabErr | 1.3.6.1.4.1.161.19.3.3.1.220 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Error count in Babble Receiver. Applies only to P9 radios and earlier. | |||||||||||||
| SfecTxHbErr | 1.3.6.1.4.1.161.19.3.3.1.221 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of packets having Transmit heartbeat error. Applies only to P9 radios and earlier. | |||||||||||||
| SfecEthBusErr | 1.3.6.1.4.1.161.19.3.3.1.222 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Ethernet Busy Error Count Applies only to P9 radios and earlier. | |||||||||||||
| SfecCRCError | 1.3.6.1.4.1.161.19.3.3.1.223 | Counter32 | RO | 0 | |||||||||
| SfecRxFifoNoBuf | 1.3.6.1.4.1.161.19.3.3.1.224 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of times could not get a buffer from Rx Fifo. | |||||||||||||
| SfecRxOverrun | 1.3.6.1.4.1.161.19.3.3.1.225 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of times Rx Fifo Overrun. Applies only to P9, P13, P15 and P16 radios. | |||||||||||||
| SfecLateCollision | 1.3.6.1.4.1.161.19.3.3.1.226 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of packets having late collision. | |||||||||||||
| SfecRetransLimitExp | 1.3.6.1.4.1.161.19.3.3.1.227 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of packets whose retransmision limit expired. | |||||||||||||
| SfecTxUnderrun | 1.3.6.1.4.1.161.19.3.3.1.228 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of times Tx queue underrun. | |||||||||||||
| SfecCarSenseLost | 1.3.6.1.4.1.161.19.3.3.1.229 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Carrier Sense Lost count. | |||||||||||||
| SfecNoCarrier | 1.3.6.1.4.1.161.19.3.3.1.230 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current No carrier asserted by external transceiver during transmission. | |||||||||||||
| SframePeriodCurrent | 1.3.6.1.4.1.161.19.3.3.1.231 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current frame period of the radio.
| |||||||||||||
| SactiveTxPowerStr | 1.3.6.1.4.1.161.19.3.3.1.232 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Current transmit power level, including potential power backoff information. Not applicable to PMP 450m. | |||||||||||||
| SactiveTxPowerHdths | 1.3.6.1.4.1.161.19.3.3.1.233 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current transmit power level, in hundredths of dBm. Not appliable on PMP 450m. | |||||||||||||
| SpoeT2Status | 1.3.6.1.4.1.161.19.3.3.1.234 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Indicates the 802.3at Type 2 Classification status. This is only available on the 450i.
| |||||||||||||
| SfecAuxStatLinkDetected | 1.3.6.1.4.1.161.19.3.3.1.235 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current 450i/450m Aux Ethernet link detected count | |||||||||||||
| SfecAuxStatLinkLost | 1.3.6.1.4.1.161.19.3.3.1.236 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current 450i/450m Aux Ethernet ink lost count | |||||||||||||
| SfecAuxInDiscardsCount | 1.3.6.1.4.1.161.19.3.3.1.237 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current 450i/450m Aux Ethernet in discards count. | |||||||||||||
| SfecAuxInErrorsCount | 1.3.6.1.4.1.161.19.3.3.1.238 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current 450i/450m Aux Ethernet in errors count. | |||||||||||||
| SfecAuxOutDiscardsCount | 1.3.6.1.4.1.161.19.3.3.1.239 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current 450i/450m Aux Ethernet out discards count. | |||||||||||||
| SfecAuxOutErrorsCount | 1.3.6.1.4.1.161.19.3.3.1.240 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current 450i/450m Aux Ethernet out errors count. | |||||||||||||
| SfecAuxCRCError | 1.3.6.1.4.1.161.19.3.3.1.241 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current 450i/450m Aux Ethernet Number of packets having CRC Error. | |||||||||||||
| SfecAuxRxOverrun | 1.3.6.1.4.1.161.19.3.3.1.242 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current 450i/450m Aux Ethernet Number of times Rx Fifo Overrun. | |||||||||||||
| SfecAuxLateCollision | 1.3.6.1.4.1.161.19.3.3.1.243 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current 450i/450m Aux Ethernet Number of packets having late collision. | |||||||||||||
| SfecAuxRetransLimitExp | 1.3.6.1.4.1.161.19.3.3.1.244 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current 450i/450m Aux Ethernet Number of packets whose retransmision limit expired. | |||||||||||||
| SfecAuxTxUnderrun | 1.3.6.1.4.1.161.19.3.3.1.245 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current 450i/450m Aux Ethernet Number of times Tx queue underrun. | |||||||||||||
| SfecAuxCarSenseLost | 1.3.6.1.4.1.161.19.3.3.1.246 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current 450i/450m Aux Ethernet Carrier Sense Lost count. | |||||||||||||
| SfecAuxNoCarrier | 1.3.6.1.4.1.161.19.3.3.1.247 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current 450i/450m Aux Ethernet No carrier asserted by external transceiver during transmission. | |||||||||||||
| SfecAuxLargeFrame | 1.3.6.1.4.1.161.19.3.3.1.248 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current 450i/450m Aux Ethernet Large Frame Error. | |||||||||||||
| SfecAuxRuntFrame | 1.3.6.1.4.1.161.19.3.3.1.249 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current 450i/450m Aux Ethernet Runt Frame Error. | |||||||||||||
| SfecLargeFrame | 1.3.6.1.4.1.161.19.3.3.1.250 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Large Frame Error. | |||||||||||||
| SfecRuntFrame | 1.3.6.1.4.1.161.19.3.3.1.251 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Runt Frame Error. | |||||||||||||
| ScamAccID | 1.3.6.1.4.1.161.19.3.3.1.259 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CnMaestro Account to which Radio is onboarded. | |||||||||||||
| ScnMaestroStatus | 1.3.6.1.4.1.161.19.3.3.1.260 | DisplayString | RO | Connected (cloud.cambiumnetworks.com) | |||||||||
scalar · DisplayString · read-only · current CnMaestro connection status. Example values from LibreNMS test devices
| |||||||||||||
| SdaVersion | 1.3.6.1.4.1.161.19.3.3.1.261 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Device Agent Version number. | |||||||||||||
| SradioStatusOverTemperature | 1.3.6.1.4.1.161.19.3.3.1.264 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Radio operation exceeds max operating temperature - Transmit disabled PMP 450m only. | |||||||||||||
| ShardwareVersion | 1.3.6.1.4.1.161.19.3.3.1.265 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Read directly from the resistors on the board is the form Major.Minor (cnMedusa-specific, Engineering Only) | |||||||||||||
| SproductTypeName | 1.3.6.1.4.1.161.19.3.3.1.266 | DisplayString | RO | PMP 450 | |||||||||
| SradioStatusTransmitControlOverridden | 1.3.6.1.4.1.161.19.3.3.1.267 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Transmit mode control is overridden in config PMP 450m only. | |||||||||||||
| SradioStatusTrackingFailure | 1.3.6.1.4.1.161.19.3.3.1.268 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Feedback tracking loop is out of tolerance - Transmit disabled PMP 450m only. | |||||||||||||
| SradioStatusSectorWeightsOff | 1.3.6.1.4.1.161.19.3.3.1.269 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Sector mode weights disabled PMP 450m only. | |||||||||||||
| SradioStatusRxBeamFormingOff | 1.3.6.1.4.1.161.19.3.3.1.270 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Rx beamforming disabled PMP 450m only. | |||||||||||||
| SradioStatusPowerDetectorInactive | 1.3.6.1.4.1.161.19.3.3.1.271 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Power detector control not active PMP 450m only. | |||||||||||||
| SradioStatusCatQuadCalFail | 1.3.6.1.4.1.161.19.3.3.1.272 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Catalina Tx quadrature calibration failure 450 platform only. Engineering use only. | |||||||||||||
| SnearFieldOperationActive | 1.3.6.1.4.1.161.19.3.3.1.273 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current When true(1) near field operation is enabled and near field range correction is being applied. PMP 450m only.
| |||||||||||||
| SradioStatusAlarmReason | 1.3.6.1.4.1.161.19.3.3.1.274 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Reason code associated with the cause of a Radio Status Alarm being triggered. Provide this code to Cambium Networks Support. PMP 450m only. | |||||||||||||
| SradioStatusAlarm | 1.3.6.1.4.1.161.19.3.3.1.275 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Radio Status Alarm. PMP 450m only.
| |||||||||||||
| SforceReassessmentActive | 1.3.6.1.4.1.161.19.3.3.1.276 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current When true(1) forced channel assessment is enabled. MU-MIMO only.
| |||||||||||||
| SfecExcessiveDeferrals | 1.3.6.1.4.1.161.19.3.3.1.277 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Excessive Deferrals. | |||||||||||||
| SrfInDiscardsCountExt | 1.3.6.1.4.1.161.19.3.3.1.278 | Counter64 | RO | ||||||||||
scalar · Counter64 · read-only · current Extended RF in discards count with 64 bit counters. | |||||||||||||
| SrfInErrorsCountExt | 1.3.6.1.4.1.161.19.3.3.1.279 | Counter64 | RO | ||||||||||
scalar · Counter64 · read-only · current Extended RF in errors count with 64 bit counters. | |||||||||||||
| SrfOutDiscardsCountExt | 1.3.6.1.4.1.161.19.3.3.1.280 | Counter64 | RO | ||||||||||
scalar · Counter64 · read-only · current Extended RF out discards count with 64 bit counters. | |||||||||||||
| SrfOutErrorsCountExt | 1.3.6.1.4.1.161.19.3.3.1.281 | Counter64 | RO | ||||||||||
scalar · Counter64 · read-only · current Extended RF out errors count with 64 bit counters. | |||||||||||||
| SminModRateSatisfied | 1.3.6.1.4.1.161.19.3.3.1.282 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Indicates that the minimum modulation rate was satisfied by both devices of the PTP link.
| |||||||||||||
| SethernetPortDisableCounter | 1.3.6.1.4.1.161.19.3.3.1.283 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Counts the nubmer of times the ethernet port has been disabled due to minimum modulation rate not being satisfied. | |||||||||||||
| SboardModel | 1.3.6.1.4.1.161.19.3.3.1.284 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Returns Board model of the device. | |||||||||||||
| StxTempPowerCompensation | 1.3.6.1.4.1.161.19.3.3.1.285 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Transmit Temperature Power Adjustment. Return path B in upper portion and A in lower portion Engineering use only. | |||||||||||||
| SrxTempPowerOffset | 1.3.6.1.4.1.161.19.3.3.1.286 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Receive Temperature Power Adjustment in hundredths of dB for RF Path A. Not supported on PMP 450m. Engineering use only. | |||||||||||||
| SboxEncryptionDetailed | 1.3.6.1.4.1.161.19.3.3.1.287 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Device encryption type. | |||||||||||||
| ScurrentCpuUsage | 1.3.6.1.4.1.161.19.3.3.1.288 | INTEGER (0..100) | RO | ||||||||||
scalar · INTEGER (0..100) · read-only · current Returns the current CPU usage as a percentage. | |||||||||||||
| SfccId | 1.3.6.1.4.1.161.19.3.3.1.289 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current FCC ID | |||||||||||||
| SfecJabbers | 1.3.6.1.4.1.161.19.3.3.1.290 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Transmit Jabber TO. Indicates tried to send a packet > 2048 bytes. Only valid on 450i and 450b devices. | |||||||||||||
| SfecAuxExcessiveDeferrals | 1.3.6.1.4.1.161.19.3.3.1.291 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current 450i Aux Ethernet Excessive Deferrals. | |||||||||||||
| SfecAuxJabbers | 1.3.6.1.4.1.161.19.3.3.1.292 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current 450i Aux Ethernet Port Transmit Jabber Error. Indicates tried to send a packet > 2048 bytes. | |||||||||||||
| SradioStatusFeedbackRssi | 1.3.6.1.4.1.161.19.3.3.1.293 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Feedback RSSI. PMP 450m only. | |||||||||||||
| SradioStatusFeedbackOvrg | 1.3.6.1.4.1.161.19.3.3.1.294 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Feedback OverRange status flags PMP 450m only. | |||||||||||||
| StxCatAttenChA | 1.3.6.1.4.1.161.19.3.3.1.295 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Transmit Catalina Attenuation Channel A. Engineering use only. | |||||||||||||
| StxCatAttenChB | 1.3.6.1.4.1.161.19.3.3.1.296 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Transmit Catalina Attenuation Channel B. Engineering use only. | |||||||||||||
| SfecRxPauseFrames | 1.3.6.1.4.1.161.19.3.3.1.297 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Ethernet RX Pause Frames Discarded. | |||||||||||||
| SfecAuxRxPauseFrames | 1.3.6.1.4.1.161.19.3.3.1.298 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current 450i Aux Ethernet RX Pause Frames Discarded. | |||||||||||||
| SfecRxEthernetBounce | 1.3.6.1.4.1.161.19.3.3.1.299 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Ethernet RX Bounced. | |||||||||||||
| SfecTxEthernetBounce | 1.3.6.1.4.1.161.19.3.3.1.300 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Ethernet TX Bounced. | |||||||||||||
| SapplyConfigStatus | 1.3.6.1.4.1.161.19.3.3.1.301 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Current Status of Configuration file applied | |||||||||||||
| SwarningText | 1.3.6.1.4.1.161.19.3.3.1.302 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Returns the current warning text that is being displayed on the GUI. | |||||||||||||
| SactiveEirp | 1.3.6.1.4.1.161.19.3.3.1.303 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current EIRP in dBm that is currently active on radio. Not supported by 450v. | |||||||||||||
| SprimaryDnsCurrentIp | 1.3.6.1.4.1.161.19.3.3.1.304 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current Current Primary DNS IP | |||||||||||||
| SsecondaryDnsCurrentIp | 1.3.6.1.4.1.161.19.3.3.1.305 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current Current Secondary DNS IP | |||||||||||||
| SactiveEirpStr | 1.3.6.1.4.1.161.19.3.3.1.306 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current EIRP in dBm that is currently active on radio per carrier. | |||||||||||||
| SboxSystemTime | 1.3.6.1.4.1.161.19.3.3.1.307 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Box System Time. | |||||||||||||
| SfecL3L4ChecksumErrs | 1.3.6.1.4.1.161.19.3.3.1.308 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of packets detected with L3/L4 checksum errors. Only valid on 450v, 450b, and 450i devices. | |||||||||||||
| SfecAuxL3L4ChecksumErrs | 1.3.6.1.4.1.161.19.3.3.1.309 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Aux Ethernet Number of packets detected with L3/L4 checksum errors. Only valid on 450v and 450i devices. | |||||||||||||
| SrfStatPARspOosCount | 1.3.6.1.4.1.161.19.3.3.1.310 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Power Adjust Response OOS Count | |||||||||||||
| SrfStatPAReqAsync | 1.3.6.1.4.1.161.19.3.3.1.311 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Asynchronous Power Adjust Requests | |||||||||||||
| SrfStatFrameTooBig | 1.3.6.1.4.1.161.19.3.3.1.312 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Frame Too Big Count | |||||||||||||
| SrfStatBadRcvAck | 1.3.6.1.4.1.161.19.3.3.1.313 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Bad Receive Ack Count | |||||||||||||
| SrfStatBadRcvFragNum | 1.3.6.1.4.1.161.19.3.3.1.314 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Bad Receive Frag Count | |||||||||||||
| SrfStatRfSYncQMsgsDropped | 1.3.6.1.4.1.161.19.3.3.1.315 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats RF Sync Q Messages Dropped | |||||||||||||
| SrfStatBadRcvFragLen | 1.3.6.1.4.1.161.19.3.3.1.316 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Bad Receive Frag Length | |||||||||||||
| SrfStatSchedulerErrors | 1.3.6.1.4.1.161.19.3.3.1.317 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Scheduler Error Count | |||||||||||||
| SrfStatEVMSamples | 1.3.6.1.4.1.161.19.3.3.1.318 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats EVM Samples | |||||||||||||
| SrfStatEVMErrors | 1.3.6.1.4.1.161.19.3.3.1.319 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats EVM Errors | |||||||||||||
| SrfStatTxRingError | 1.3.6.1.4.1.161.19.3.3.1.320 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats TX Ring Errors | |||||||||||||
| SrfStatRxRingError | 1.3.6.1.4.1.161.19.3.3.1.321 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats RX Ring Errors | |||||||||||||
| SrfStatUnexpectedNonzeroBitmap | 1.3.6.1.4.1.161.19.3.3.1.322 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Unexpected Nonzero Bitmaps | |||||||||||||
| SrfStatTDDSlips | 1.3.6.1.4.1.161.19.3.3.1.324 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats TDD Slips | |||||||||||||
| SrfStatVCClearErrors | 1.3.6.1.4.1.161.19.3.3.1.325 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats VC Clear Errors | |||||||||||||
| SrfStatRxNoBuffer | 1.3.6.1.4.1.161.19.3.3.1.326 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats RX No Buffer Count | |||||||||||||
| SrfStatOTARCount | 1.3.6.1.4.1.161.19.3.3.1.327 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats OTAR Count | |||||||||||||
| SrfStatOTARErrors | 1.3.6.1.4.1.161.19.3.3.1.328 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats OTAR Errors | |||||||||||||
| SrfStatWMACFDISRcvOverruns | 1.3.6.1.4.1.161.19.3.3.1.329 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats WMAC FDIS Receive Overruns | |||||||||||||
| SrfStatWMACDLCRcvOverruns | 1.3.6.1.4.1.161.19.3.3.1.330 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats WMAC DLC Receive Overruns | |||||||||||||
| SrfStatWMACDLCRInfoUnknowns | 1.3.6.1.4.1.161.19.3.3.1.331 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats WMAC DLC RInfo Unknowns | |||||||||||||
| SrfStatWMACDLCRinfoSheds | 1.3.6.1.4.1.161.19.3.3.1.332 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats DLS RInfo Sheds | |||||||||||||
| SrfStatWPHYChokeCount | 1.3.6.1.4.1.161.19.3.3.1.333 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Choke Count | |||||||||||||
| SrfStatInvalidVCRFeceived | 1.3.6.1.4.1.161.19.3.3.1.334 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current RF Scheduler Stats Invalid VC Received | |||||||||||||
| SbridgeCbEthSfpStatbin | 1.3.6.1.4.1.161.19.3.3.1.3000 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB Eth SFP Stats bin | |||||||||||||
| SbridgeCbEthSfpStatbout | 1.3.6.1.4.1.161.19.3.3.1.3001 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB Eth SFP Stats bout | |||||||||||||
| SbridgeCbEthSfpStatbtoss | 1.3.6.1.4.1.161.19.3.3.1.3002 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB Eth SFP Stats btoss | |||||||||||||
| SbridgeCbEthSfpStatbtosscap | 1.3.6.1.4.1.161.19.3.3.1.3003 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB Eth SFP Stats btosscap | |||||||||||||
| SbridgeCbEthSfpStatuin | 1.3.6.1.4.1.161.19.3.3.1.3004 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB Eth SFP Stats uin | |||||||||||||
| SbridgeCbEthSfpStatuout | 1.3.6.1.4.1.161.19.3.3.1.3005 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB Eth SFP Stats uout | |||||||||||||
| SbridgeCbEthSfpStatutoss | 1.3.6.1.4.1.161.19.3.3.1.3006 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB Eth SFP Stats utoss | |||||||||||||
| SbridgeCbEthSfpStatutosscap | 1.3.6.1.4.1.161.19.3.3.1.3007 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB Eth SFP Stats utosscap | |||||||||||||
| SbridgeCbEthSfpStatfloods | 1.3.6.1.4.1.161.19.3.3.1.3010 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Bridge CB Eth SFP Stats Floods (Multipoint AP only) | |||||||||||||
| SboxVcDepth | 1.3.6.1.4.1.161.19.3.3.1.3011 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The current VC Depth on this device. SM value is only valid when in session.
| |||||||||||||
| NwhispBoxConfig | 1.3.6.1.4.1.161.19.3.3.2 | ||||||||||||
| ScolorCode | 1.3.6.1.4.1.161.19.3.3.2.2 | INTEGER (0..254) | RW | ||||||||||
scalar · INTEGER (0..254) · read-write · current Color code. | |||||||||||||
| SfullAccess | 1.3.6.1.4.1.161.19.3.3.2.4 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Full access password. | |||||||||||||
| SwebAutoUpdate | 1.3.6.1.4.1.161.19.3.3.2.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Web page auto update in seconds. 0 means disabled.
| |||||||||||||
| Spass1Status | 1.3.6.1.4.1.161.19.3.3.2.6 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Password 1(display only) status. | |||||||||||||
| Spass2Status | 1.3.6.1.4.1.161.19.3.3.2.7 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Password 2(full access) status. | |||||||||||||
| SbridgeEntryTimeout | 1.3.6.1.4.1.161.19.3.3.2.8 | INTEGER (25..1440) | RW | ||||||||||
scalar · INTEGER (25..1440) · read-write · current Bridge table time out Range : 25 -- 1440 Minutes.
| |||||||||||||
| SsnmpMibPerm | 1.3.6.1.4.1.161.19.3.3.2.9 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Read/Write permission for MIB groups.
| |||||||||||||
| SbhTimingMode | 1.3.6.1.4.1.161.19.3.3.2.10 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Variable to switch between Timing Master and Timing Slave. For Backhaul units only.
| |||||||||||||
| SpowerControl | 1.3.6.1.4.1.161.19.3.3.2.12 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated Power control. FSK Only.
| |||||||||||||
| SantennaGain | 1.3.6.1.4.1.161.19.3.3.2.14 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current External Antenna Gain. For radios that uses an external antenna or the DFS feature. Not applicable to PMP 450m.
| |||||||||||||
| Seirp | 1.3.6.1.4.1.161.19.3.3.2.15 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Transmit EIRP of radio. PMP 450m only.
| |||||||||||||
| SdynamicLearning | 1.3.6.1.4.1.161.19.3.3.2.16 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To enable VLAN dynamic learning.
| |||||||||||||
| SmanagementVID | 1.3.6.1.4.1.161.19.3.3.2.17 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Management VLAN VID. | |||||||||||||
| SagingTimeout | 1.3.6.1.4.1.161.19.3.3.2.18 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Aging timeout. | |||||||||||||
| SframeType | 1.3.6.1.4.1.161.19.3.3.2.19 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Allow only tagged frame.
| |||||||||||||
| SaddVlanMember | 1.3.6.1.4.1.161.19.3.3.2.20 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Write-Only OID,Add VLAN number which needs to be added. | |||||||||||||
| SremoveVlanMember | 1.3.6.1.4.1.161.19.3.3.2.21 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Write-only OID,Enter VLAN ID which needs to deleted. If Vlan doesnot exist an error will be returned. | |||||||||||||
| StransmitterOP | 1.3.6.1.4.1.161.19.3.3.2.23 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Transmitter output power. This is not available on OFDM SMs. Not applicable for PMP 450m. See EIRP OID. Not applicable for 450v, see carrierTxPower.
| |||||||||||||
| SbridgeEnable | 1.3.6.1.4.1.161.19.3.3.2.24 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Disable or enable bridging functionality for a BH unit.
| |||||||||||||
| SfecEnable | 1.3.6.1.4.1.161.19.3.3.2.25 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated Disable or enable FEC error correction functionality for multipoint units. This OID has no effect since 14.0 and is deprecated.
| |||||||||||||
| ScommStringRWrite | 1.3.6.1.4.1.161.19.3.3.2.36 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Read/Write Community string. This is a write-only OID. | |||||||||||||
| SsubnetMask | 1.3.6.1.4.1.161.19.3.3.2.37 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Subnet mask for the management IP 1. | |||||||||||||
| SmngtIP | 1.3.6.1.4.1.161.19.3.3.2.38 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Management IP address 1. | |||||||||||||
| SallowVIDAccess | 1.3.6.1.4.1.161.19.3.3.2.39 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Allow or disallow local SM management VID access.
| |||||||||||||
| SsetDefaultPlug | 1.3.6.1.4.1.161.19.3.3.2.40 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current If enabled parameters are set to Factory Defaults upon default plug mode detection.
| |||||||||||||
| SgpsInput | 1.3.6.1.4.1.161.19.3.3.2.42 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Values 1, 2, 3 have been deprecated. (0) Generate AP sync signal. (1) Deprecated. Sync AP to received signal (Timing Port (UGPS/cnPulse)). It will set AutoSync. (2) Deprecated. Sync AP to received signal (Power Port). It will set AutoSync plus Free Run. (3) Deprecated. Sync AP using iGPS (Only on devices which support it). It will set AutoSync plus Free Run. (4) AutoSync. (5) AutoSync plus Free Run.
| |||||||||||||
| Sism | 1.3.6.1.4.1.161.19.3.3.2.43 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable ISM on 5.7GHz frequency band radios.
| |||||||||||||
| SuserName | 1.3.6.1.4.1.161.19.3.3.2.45 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current User name.To create read-only user set userMode OID first. First set userChangePassword OID for user must change password. Maximum of 4 users can exist in system. | |||||||||||||
| SuserPassword | 1.3.6.1.4.1.161.19.3.3.2.46 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current User password.To create read-only user set userMode OID first. Set userChangePassword OID to make user change password at first login.. | |||||||||||||
| SuserAccessLevel | 1.3.6.1.4.1.161.19.3.3.2.47 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current User access level.To create read-only user set userMode OID first. Set userChangePassword OID to make user change password at first login. 1=TECH 2=INSTALL 3=ADMIN | |||||||||||||
| SdeleteUser | 1.3.6.1.4.1.161.19.3.3.2.48 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current User name to remove. | |||||||||||||
| SlanDhcpState | 1.3.6.1.4.1.161.19.3.3.2.50 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To enable or disable LAN Interface DHCP feature.
| |||||||||||||
| SsessionTimeout | 1.3.6.1.4.1.161.19.3.3.2.51 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Timer for Telnet, Web and FTP sessions. | |||||||||||||
| SvlanMemberSource | 1.3.6.1.4.1.161.19.3.3.2.52 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Specified the VLAN member source to display. 0=configured, 1=active configuration. Note that this OID is internal to SNMP and is not available at the Web Interface.
| |||||||||||||
| SaddCustomFreqList | 1.3.6.1.4.1.161.19.3.3.2.53 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Add Custom Frequencies. The frequencies can be in a variety of units up to kHz. Frequencies can be added in a list separated by commas. Example: 3550, 356000, 3450001. A get will return the current custom frequency list. Max string length entered cannot exceed 128 character. Note if there is not enough room for all the frequencies none will be added. Only valid for use on 3.5/3.6 GHz MIMO OFDM Radios, or 450i in 4.9 GHz. | |||||||||||||
| SremoveCustomFreqList | 1.3.6.1.4.1.161.19.3.3.2.54 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Remove Custom Frequencies. The frequencies can be in a variety of units up to kHz. Frequencies can be removed in a list separated by commas. Example: 3550, 356000, 3450001. A get will return the current custom frequencies. Only valid for use on 3.5/3.6 GHz MIMO OFDM Radios, or 450i in 4.9 GHz. | |||||||||||||
| SchangeUsrPwd | 1.3.6.1.4.1.161.19.3.3.2.56 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Allow to change the password of a given user of a given user. Usage: userName,password. | |||||||||||||
| SmngtIP2 | 1.3.6.1.4.1.161.19.3.3.2.57 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Management IP address 2. | |||||||||||||
| SsubnetMask2 | 1.3.6.1.4.1.161.19.3.3.2.58 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Subnet mask for the management IP 2. | |||||||||||||
| SmngtIP3 | 1.3.6.1.4.1.161.19.3.3.2.59 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Management IP address 3. | |||||||||||||
| SsubnetMask3 | 1.3.6.1.4.1.161.19.3.3.2.60 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Subnet mask for the management IP 3. | |||||||||||||
| SmngtIP4 | 1.3.6.1.4.1.161.19.3.3.2.61 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Management IP address 4. | |||||||||||||
| SsubnetMask4 | 1.3.6.1.4.1.161.19.3.3.2.62 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Subnet mask for the management IP 4. | |||||||||||||
| SmngtIP5 | 1.3.6.1.4.1.161.19.3.3.2.63 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Management IP address 5. | |||||||||||||
| SsubnetMask5 | 1.3.6.1.4.1.161.19.3.3.2.64 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Subnet mask for the management IP 5. | |||||||||||||
| SmngtIP6 | 1.3.6.1.4.1.161.19.3.3.2.65 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Management IP address 6. | |||||||||||||
| SsubnetMask6 | 1.3.6.1.4.1.161.19.3.3.2.66 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Subnet mask for the management IP 6. | |||||||||||||
| SmngtIP7 | 1.3.6.1.4.1.161.19.3.3.2.67 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Management IP address 7. | |||||||||||||
| SsubnetMask7 | 1.3.6.1.4.1.161.19.3.3.2.68 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Subnet mask for the management IP 7. | |||||||||||||
| SmngtIP8 | 1.3.6.1.4.1.161.19.3.3.2.69 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Management IP address 8. | |||||||||||||
| SsubnetMask8 | 1.3.6.1.4.1.161.19.3.3.2.70 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Subnet mask for the management IP 8. | |||||||||||||
| SmngtIP9 | 1.3.6.1.4.1.161.19.3.3.2.71 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Management IP address 9. | |||||||||||||
| SsubnetMask9 | 1.3.6.1.4.1.161.19.3.3.2.72 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Subnet mask for the management IP 9. | |||||||||||||
| SmngtIP10 | 1.3.6.1.4.1.161.19.3.3.2.73 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Management IP address 10. | |||||||||||||
| SsubnetMask10 | 1.3.6.1.4.1.161.19.3.3.2.74 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Subnet mask for the management IP 10. | |||||||||||||
| SbhvlanEnable | 1.3.6.1.4.1.161.19.3.3.2.75 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To enable or disable VLAN for Backhaul Master/Slave.
| |||||||||||||
| SlldpBroadcastEnable | 1.3.6.1.4.1.161.19.3.3.2.76 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To enable Broadcast of LLDP message, if disabled LLDP uses multicast
| |||||||||||||
| SregionCode | 1.3.6.1.4.1.161.19.3.3.2.77 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated Set Region Code for the Unit. Used the individual region[Region] OIDs instead.
| |||||||||||||
| SrussiaRegion | 1.3.6.1.4.1.161.19.3.3.2.78 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated Set Category Region for Russian 5.9/6.05 GHz Radio Only. Use setting under regionAsia now.
| |||||||||||||
| ScommStringROnly | 1.3.6.1.4.1.161.19.3.3.2.79 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Set Read Only commnunity string. | |||||||||||||
| SethernetLinkSpeed | 1.3.6.1.4.1.161.19.3.3.2.80 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set/Get Ethernet link speed and duplex settings. Note that the Gigabit options are only valid for boards that support Gigabit speeds.
| |||||||||||||
| ScyclicPrefix | 1.3.6.1.4.1.161.19.3.3.2.81 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Cyclic Prefix value, for OFDM Radios only. Deprecated for MIMO SMs. For PMP 430 SMs, this value is only used while in PMP 430 mode (1/16 is forced in PMP 450 mode).
| |||||||||||||
| SnumberCustomFreq | 1.3.6.1.4.1.161.19.3.3.2.82 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of custom frequencies added. There is a maximum of 100. For use on 3.5 GHz OFDM Radios only. | |||||||||||||
| SchannelBandwidth | 1.3.6.1.4.1.161.19.3.3.2.83 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The current channel bandwidth in MHz. For use on OFDM Radios only. Obsoleted for MIMO SMs. | |||||||||||||
| SsetDefaults | 1.3.6.1.4.1.161.19.3.3.2.84 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting this to 1 will set the radio to Factory Defaults after the next reboot. Setting this to 0 will undo Factory Defaults if and only if Factory Defaults have been set previously without rebooting. Reading this OID will return 0 if Factory Defaults are not set, or a 2 if Factory Defaults are set and we are now awaiting a reboot. NOTE: this operation is reversible as long as you write a 0 to this OID prior to reboot. As a security measure, this OID is only valid when the radio was booted in default plug mode. If the radio is not currently in default plug mode, then attempting to set this OID will fail.
| |||||||||||||
| SradioRateAdapt | 1.3.6.1.4.1.161.19.3.3.2.85 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Downlink Maximum Modulation Rate 0: 1x (MIMO-A QPSK) 1: 2x (MIMO-A QPSK 16-QAM, and MIMO-B QPSK) 2: 3x (MIMO-A 64-QAM, and MIMO-B 8-QAM) 3: 4x (MIMO-A 256-QAM, and MIMO-B 16-QAM) 4: 6x (MIMO-B 64-QAM) 5: 8x (MIMO-B 256-QAM) 6: 5x (MIMO-B 32-QAM) 7: 7x (MIMO-B 128-QAM) Use radioRateAdaptUL for setting uplink rate adapt.
| |||||||||||||
| SsiteInfoViewable | 1.3.6.1.4.1.161.19.3.3.2.86 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable non login users the ability to view Site Information
| |||||||||||||
| SlargeVCQ | 1.3.6.1.4.1.161.19.3.3.2.87 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable or disable Large VC Qs for SM or PTP radios. Enable when Uplink is being used for camera video feed.
| |||||||||||||
| Slatitude | 1.3.6.1.4.1.161.19.3.3.2.88 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The latitude setting of this unit in decimal degrees. | |||||||||||||
| Slongitude | 1.3.6.1.4.1.161.19.3.3.2.89 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The longitude setting of this unit in decimal degrees. | |||||||||||||
| Sheight | 1.3.6.1.4.1.161.19.3.3.2.90 | INTEGER (-2147483647..2147483647) | RW | ||||||||||
scalar · INTEGER (-2147483647..2147483647) · read-write · current The height setting of this unit in meters. | |||||||||||||
| Sbandwidth | 1.3.6.1.4.1.161.19.3.3.2.91 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Radio bandwidth setting. Obsoleted for MIMO SMs. Instead for MIMO SMs use OID bandwidthScan. As of Release 16.1, reboot is not required to change, except on PMP 450m.
| |||||||||||||
| SportVID | 1.3.6.1.4.1.161.19.3.3.2.93 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Backhaul Port VID (PVID). | |||||||||||||
| SradioRateAdaptUL | 1.3.6.1.4.1.161.19.3.3.2.94 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Uplink Maximum Modulation Rate 0: 1x (MIMO-A QPSK) 1: 2x (MIMO-A QPSK 16-QAM, and MIMO-B QPSK) 2: 3x (MIMO-A 64-QAM, and MIMO-B 8-QAM) 3: 4x (MIMO-A 256-QAM, and MIMO-B 16-QAM) 4: 6x (MIMO-B 64-QAM) 5: 8x (MIMO-B 256-QAM) 6: 5x (MIMO-B 32-QAM) 7: 7x (MIMO-B 128-QAM) Use radioRateAdapt for setting downlink rate adapt.
| |||||||||||||
| SproviderVID | 1.3.6.1.4.1.161.19.3.3.2.95 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Provider VID for QinQ VLAN. | |||||||||||||
| Smac1VIDMapAddr | 1.3.6.1.4.1.161.19.3.3.2.96 | MacAddress | RW | ||||||||||
scalar · MacAddress · read-write · current MAC Address for Entry 1 in MAC Address VID Mapping Table. | |||||||||||||
| Smac1VIDMapVid | 1.3.6.1.4.1.161.19.3.3.2.97 | INTEGER (1..4094) | RW | ||||||||||
scalar · INTEGER (1..4094) · read-write · current VID for Entry 1 in MAC Address VID Mapping Table. | |||||||||||||
| Smac2VIDMapAddr | 1.3.6.1.4.1.161.19.3.3.2.98 | MacAddress | RW | ||||||||||
scalar · MacAddress · read-write · current MAC Address for Entry 2 in MAC Address VID Mapping Table. | |||||||||||||
| Smac2VIDMapVid | 1.3.6.1.4.1.161.19.3.3.2.99 | INTEGER (1..4094) | RW | ||||||||||
scalar · INTEGER (1..4094) · read-write · current VID for Entry 2 in MAC Address VID Mapping Table. | |||||||||||||
| Smac3VIDMapAddr | 1.3.6.1.4.1.161.19.3.3.2.100 | MacAddress | RW | ||||||||||
scalar · MacAddress · read-write · current MAC Address for Entry 3 in MAC Address VID Mapping Table. | |||||||||||||
| Smac3VIDMapVid | 1.3.6.1.4.1.161.19.3.3.2.101 | INTEGER (1..4094) | RW | ||||||||||
scalar · INTEGER (1..4094) · read-write · current VID for Entry 3 in MAC Address VID Mapping Table. | |||||||||||||
| Smac4VIDMapAddr | 1.3.6.1.4.1.161.19.3.3.2.102 | MacAddress | RW | ||||||||||
scalar · MacAddress · read-write · current MAC Address for Entry 4 in MAC Address VID Mapping Table. | |||||||||||||
| Smac4VIDMapVid | 1.3.6.1.4.1.161.19.3.3.2.103 | INTEGER (1..4094) | RW | ||||||||||
scalar · INTEGER (1..4094) · read-write · current VID for Entry 4 in MAC Address VID Mapping Table. | |||||||||||||
| Smac5VIDMapAddr | 1.3.6.1.4.1.161.19.3.3.2.104 | MacAddress | RW | ||||||||||
scalar · MacAddress · read-write · current MAC Address for Entry 5 in MAC Address VID Mapping Table. | |||||||||||||
| Smac5VIDMapVid | 1.3.6.1.4.1.161.19.3.3.2.105 | INTEGER (1..4094) | RW | ||||||||||
scalar · INTEGER (1..4094) · read-write · current VID for Entry 5 in MAC Address VID Mapping Table. | |||||||||||||
| Smac6VIDMapAddr | 1.3.6.1.4.1.161.19.3.3.2.106 | MacAddress | RW | ||||||||||
scalar · MacAddress · read-write · current MAC Address for Entry 6 in MAC Address VID Mapping Table. | |||||||||||||
| Smac6VIDMapVid | 1.3.6.1.4.1.161.19.3.3.2.107 | INTEGER (1..4094) | RW | ||||||||||
scalar · INTEGER (1..4094) · read-write · current VID for Entry 6 in MAC Address VID Mapping Table. | |||||||||||||
| Smac7VIDMapAddr | 1.3.6.1.4.1.161.19.3.3.2.108 | MacAddress | RW | ||||||||||
scalar · MacAddress · read-write · current MAC Address for Entry 7 in MAC Address VID Mapping Table. | |||||||||||||
| Smac7VIDMapVid | 1.3.6.1.4.1.161.19.3.3.2.109 | INTEGER (1..4094) | RW | ||||||||||
scalar · INTEGER (1..4094) · read-write · current VID for Entry 7 in MAC Address VID Mapping Table. | |||||||||||||
| Smac8VIDMapAddr | 1.3.6.1.4.1.161.19.3.3.2.110 | MacAddress | RW | ||||||||||
scalar · MacAddress · read-write · current MAC Address for Entry 8 in MAC Address VID Mapping Table. | |||||||||||||
| Smac8VIDMapVid | 1.3.6.1.4.1.161.19.3.3.2.111 | INTEGER (1..4094) | RW | ||||||||||
scalar · INTEGER (1..4094) · read-write · current VID for Entry 8 in MAC Address VID Mapping Table. | |||||||||||||
| Smac9VIDMapAddr | 1.3.6.1.4.1.161.19.3.3.2.112 | MacAddress | RW | ||||||||||
scalar · MacAddress · read-write · current MAC Address for Entry 9 in MAC Address VID Mapping Table. | |||||||||||||
| Smac9VIDMapVid | 1.3.6.1.4.1.161.19.3.3.2.113 | INTEGER (1..4094) | RW | ||||||||||
scalar · INTEGER (1..4094) · read-write · current VID for Entry 9 in MAC Address VID Mapping Table. | |||||||||||||
| Smac10VIDMapAddr | 1.3.6.1.4.1.161.19.3.3.2.114 | MacAddress | RW | ||||||||||
scalar · MacAddress · read-write · current MAC Address for Entry 10 in MAC Address VID Mapping Table. | |||||||||||||
| Smac10VIDMapVid | 1.3.6.1.4.1.161.19.3.3.2.115 | INTEGER (1..4094) | RW | ||||||||||
scalar · INTEGER (1..4094) · read-write · current VID for Entry 10 in MAC Address VID Mapping Table. | |||||||||||||
| SvlanPortType | 1.3.6.1.4.1.161.19.3.3.2.116 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current VLAN Port Type for VLAN interface. Default is Q.
| |||||||||||||
| SvlanAcceptQinQFrames | 1.3.6.1.4.1.161.19.3.3.2.117 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Allow/Disallow packets already doubly-tagged (QinQ) to ingress the FEC of BHM, BHS, or MP SM. Not configurable on MP AP.
| |||||||||||||
| SwhispWebUserAccessMode | 1.3.6.1.4.1.161.19.3.3.2.118 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This variable selects if web page users for the radio should be authenticated locally or via a centralised remote Radius server
| |||||||||||||
| SusrAccountEnableAccounting | 1.3.6.1.4.1.161.19.3.3.2.119 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Select the level of accounting information to be reported to the server
| |||||||||||||
| SallowRejectThenLocal | 1.3.6.1.4.1.161.19.3.3.2.120 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Control for allowing local authenication if the AAA remote server
| |||||||||||||
| SsnrCalculation | 1.3.6.1.4.1.161.19.3.3.2.121 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated This OID is deprecated. Receive quality calulation is always on since it no longer affects packet per second performance.
| |||||||||||||
| SpriorityPrecedence | 1.3.6.1.4.1.161.19.3.3.2.122 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Allows user to decide if 802.1p or DiffServ priority bits should be used first when making priority decisions.
| |||||||||||||
| SinstallationColorCode | 1.3.6.1.4.1.161.19.3.3.2.123 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Installation Color Code. Allows non-configured SMs to register to an AP with UCC enabled in order to facilitate remote provisioning.
| |||||||||||||
| SapSmMode | 1.3.6.1.4.1.161.19.3.3.2.124 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set AP to SM or SM to AP. Useful for facillitating scripting of running Spectrum Analyzer on an AP. Radio must have AP Feature Key. 1 - Set to SM, 0 - Set to AP.
| |||||||||||||
| SpppoeFilter | 1.3.6.1.4.1.161.19.3.3.2.125 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set PPPoE packet filter when NAT is disabled.
| |||||||||||||
| SsmbFilter | 1.3.6.1.4.1.161.19.3.3.2.126 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set SMB packet filter when NAT is disabled.
| |||||||||||||
| SsnmpFilter | 1.3.6.1.4.1.161.19.3.3.2.127 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set SNMP packet filter when NAT is disabled.
| |||||||||||||
| SuserP1Filter | 1.3.6.1.4.1.161.19.3.3.2.128 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set user defined port 1 packet filter.
| |||||||||||||
| SuserP2Filter | 1.3.6.1.4.1.161.19.3.3.2.129 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set user defined port 2 packet filter.
| |||||||||||||
| SuserP3Filter | 1.3.6.1.4.1.161.19.3.3.2.130 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set user defined port 3 packet filter.
| |||||||||||||
| SallOtherIpFilter | 1.3.6.1.4.1.161.19.3.3.2.131 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set all other IPv4 packet filter when NAT is disabled.
| |||||||||||||
| SallIpv4Filter | 1.3.6.1.4.1.161.19.3.3.2.132 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set all IPv4 packet filter when NAT is disabled. Enabling this will automatically enable all of the known IPv4 filters (SMB, SNMP, Bootp, IPv4 Mcast, User Defined Ports, and All Other IPv4).
| |||||||||||||
| SarpFilter | 1.3.6.1.4.1.161.19.3.3.2.133 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set ARP packet filter when NAT is disabled.
| |||||||||||||
| SallOthersFilter | 1.3.6.1.4.1.161.19.3.3.2.134 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set all other packet filter when NAT is disabled.
| |||||||||||||
| SuserDefinedPort1 | 1.3.6.1.4.1.161.19.3.3.2.135 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current An integer value of number one user defined port. Range:0-65535 | |||||||||||||
| Sport1TCPFilter | 1.3.6.1.4.1.161.19.3.3.2.136 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set user defined port 1 TCP traffic filter.
| |||||||||||||
| Sport1UDPFilter | 1.3.6.1.4.1.161.19.3.3.2.137 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set user defined port 1 UDP traffic filter.
| |||||||||||||
| SuserDefinedPort2 | 1.3.6.1.4.1.161.19.3.3.2.138 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current An integer value of number two user defined port. Range:0-65535 | |||||||||||||
| Sport2TCPFilter | 1.3.6.1.4.1.161.19.3.3.2.139 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set user defined port 2 TCP traffic filter.
| |||||||||||||
| Sport2UDPFilter | 1.3.6.1.4.1.161.19.3.3.2.140 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set user defined port 2 UDP traffic filter.
| |||||||||||||
| SuserDefinedPort3 | 1.3.6.1.4.1.161.19.3.3.2.141 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current An integer value of number three user defined port. Range:0-65535 | |||||||||||||
| Sport3TCPFilter | 1.3.6.1.4.1.161.19.3.3.2.142 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set user defined port 3 TCP traffic filter.
| |||||||||||||
| Sport3UDPFilter | 1.3.6.1.4.1.161.19.3.3.2.143 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set user defined port 3 UDP traffic filter.
| |||||||||||||
| SbootpcFilter | 1.3.6.1.4.1.161.19.3.3.2.144 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set bootp client sourced packets filter when NAT is disabled.
| |||||||||||||
| SbootpsFilter | 1.3.6.1.4.1.161.19.3.3.2.145 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set bootp server sourced packets filter when NAT is disabled.
| |||||||||||||
| Sip4MultFilter | 1.3.6.1.4.1.161.19.3.3.2.146 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set IPv4 MultiCast packets filter when NAT is disabled.
| |||||||||||||
| SpacketFilterDirection | 1.3.6.1.4.1.161.19.3.3.2.147 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set packet filter direction. Upstream is default.
| |||||||||||||
| SencryptionConfig | 1.3.6.1.4.1.161.19.3.3.2.148 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set the encryption algorithm to use. Applicable only on radios that support encryption configuration. Prior to 20.3, cannot be set on AP if encryption is disabled (enabled via encryptionMode OID). Only able to set to DES on pre 15.2 radios. Post 15.2, only AES is supported. Not applicable to SM/BHS running 15.2 or newer.
| |||||||||||||
| SpppoeCtlPriority | 1.3.6.1.4.1.161.19.3.3.2.149 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Prioritization of PPPoE Control packets.
| |||||||||||||
| SftpPort | 1.3.6.1.4.1.161.19.3.3.2.150 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Port used to for FTP. Default is 21. | |||||||||||||
| ShttpPort | 1.3.6.1.4.1.161.19.3.3.2.151 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Port used to for HTTP. Default is 80. | |||||||||||||
| ShttpsPort | 1.3.6.1.4.1.161.19.3.3.2.152 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Port used to for HTTPs. Default is 443. | |||||||||||||
| SsnmpPort | 1.3.6.1.4.1.161.19.3.3.2.153 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Port used to for SNMP. Default is 161. | |||||||||||||
| SsnmpTrapPort | 1.3.6.1.4.1.161.19.3.3.2.154 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Port used to for SNMP Traps. Default is 162. | |||||||||||||
| SwebAccess | 1.3.6.1.4.1.161.19.3.3.2.155 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This variable determines if only HTTP or HTTPs connection are allowed. 0: HTTP Only 1: HTTPs Only 2: HTTP and HTTPs Both
| |||||||||||||
| SsyslogDomainNameAppend | 1.3.6.1.4.1.161.19.3.3.2.156 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Select whether to append the configured management domain name to
the Syslog server name. For example, if dnsMgmtDomainName is
set to 'example.com', syslogServerAddr is set to 'syslog1', and syslogDomainNameAppend
is set to appendDomain, the Syslog Server name used would be 'syslog1.example.com'.
| |||||||||||||
| SsyslogServerAddr | 1.3.6.1.4.1.161.19.3.3.2.157 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Syslog server address either in dotted decimal notation or a Fully Qualified Domain Name | |||||||||||||
| SsyslogServerPort | 1.3.6.1.4.1.161.19.3.3.2.158 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Listening port on the Syslog server. Default is 514. | |||||||||||||
| SsyslogMinLevel | 1.3.6.1.4.1.161.19.3.3.2.159 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Sets the minimum syslog severity to transmit. Messages with a lower severity value (i.e. numerically higher) than this will not be transmitted.
| |||||||||||||
| SallIpv6Filter | 1.3.6.1.4.1.161.19.3.3.2.160 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set all IPv6 packet filter when NAT is disabled. Enabling this will automatically enable all of the known IPv6 filters (SMB, SNMP, Bootp, IPv6 Mcast, User Defined Ports, and All Other IPv6).
| |||||||||||||
| Sipv6smbFilter | 1.3.6.1.4.1.161.19.3.3.2.161 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set IPv6 SMB packet filter when NAT is disabled.
| |||||||||||||
| Sipv6snmpFilter | 1.3.6.1.4.1.161.19.3.3.2.162 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set IPv6 SNMP packet filter when NAT is disabled.
| |||||||||||||
| Sipv6bootpcFilter | 1.3.6.1.4.1.161.19.3.3.2.163 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set IPv6 bootp client sourced packets filter when NAT is disabled.
| |||||||||||||
| Sipv6bootpsFilter | 1.3.6.1.4.1.161.19.3.3.2.164 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set IPv6 bootp server sourced packets filter when NAT is disabled.
| |||||||||||||
| Sipv6MultFilter | 1.3.6.1.4.1.161.19.3.3.2.165 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set IPv6 MultiCast packets filter when NAT is disabled.
| |||||||||||||
| SallOtherIpv6Filter | 1.3.6.1.4.1.161.19.3.3.2.166 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set all other IPv6 packet filter when NAT is disabled.
| |||||||||||||
| SsnmpStatus | 1.3.6.1.4.1.161.19.3.3.2.167 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This variable determines SNMP operation mode. 0: Disable SNMP 1: Enable SNMPv2c only (default) 2: Enable SNMPv3 only 3: Enable SNMPv2c and SNMPv3
| |||||||||||||
| StelnetStatus | 1.3.6.1.4.1.161.19.3.3.2.168 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This variable determines if Telnet to enabled or not. 0: Disable Telnet 1: Enable Telnet
| |||||||||||||
| SftpStatus | 1.3.6.1.4.1.161.19.3.3.2.169 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This variable determines if FTP to enabled or not. 0: Disable FTP 1: Enable FTP
| |||||||||||||
| StftpStatus | 1.3.6.1.4.1.161.19.3.3.2.170 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This variable determines if TFTP is enabled or not. 0: Disable TFTP 1: Enable TFTP
| |||||||||||||
| SuserMode | 1.3.6.1.4.1.161.19.3.3.2.171 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current User Mode 1=Read-Only 0=Read-Write(default). | |||||||||||||
| StcpAckPriority | 1.3.6.1.4.1.161.19.3.3.2.172 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Prioritize TCP ACK that are 64 bytes or less.
| |||||||||||||
| ScodePointSelect | 1.3.6.1.4.1.161.19.3.3.2.173 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Codepoint Select.This represents the CodePoint Selection to be modified via Priority Select
| |||||||||||||
| SprioritySelect | 1.3.6.1.4.1.161.19.3.3.2.174 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Priority Select.The priority setting input for the CodePoint selected in CodePoint Select.
| |||||||||||||
| SauxPortEnable | 1.3.6.1.4.1.161.19.3.3.2.175 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable(1) or Disable(0) aux ethernet port on 450i or 450m radio Enabling the Aux Ethernet port will disrupt the Aux Power to UGPS
| |||||||||||||
| SpoeAuxEnable | 1.3.6.1.4.1.161.19.3.3.2.176 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable(1) or Disable(0) Aux Ethernet port PoE on 450i or 450m radio
| |||||||||||||
| SwhispUsrAuth | 1.3.6.1.4.1.161.19.3.3.2.177 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Select method for User Authentication.
| |||||||||||||
| Sipv6State | 1.3.6.1.4.1.161.19.3.3.2.178 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Variable to enable/disable IPv6 protocol for management on radio. For SMs, cannot be enabled with NAT enabled. To enable IPv6, NAT must first be disabled.
| |||||||||||||
| Sdhcpv6State | 1.3.6.1.4.1.161.19.3.3.2.179 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Variable to enable/disable stateful DHCPv6.
| |||||||||||||
| Slan1Dhcpv6Release | 1.3.6.1.4.1.161.19.3.3.2.180 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting the variable to '1' will release LAN1's IPv6 address and send a DHCPv6 Release Message to the DHCPv6 server. Applicable only when NAT is disabled.
| |||||||||||||
| Slan1Dhcpv6Renew | 1.3.6.1.4.1.161.19.3.3.2.181 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting the variable to '1' will renew LAN1's lease time for its current IPv6 address. Applicable only when NAT is disabled.
| |||||||||||||
| Slan1DhcpRelease | 1.3.6.1.4.1.161.19.3.3.2.201 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting the variable to '1' will release LAN1's IP address and send a DHCP Release Message to the DHCP server. Applicable only when NAT is disabled.
| |||||||||||||
| Slan1DhcpRenew | 1.3.6.1.4.1.161.19.3.3.2.202 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting the variable to '1' will renew LAN1's lease time for its current IP address. Applicable only when NAT is disabled.
| |||||||||||||
| Slan3DhcpRelease | 1.3.6.1.4.1.161.19.3.3.2.203 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting the variable to '1' will release LAN3's (RF Public) IP address and send a DHCP Release Message to the DHCP server. Applicable only when NAT is enabled.
| |||||||||||||
| Slan3DhcpRenew | 1.3.6.1.4.1.161.19.3.3.2.204 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting the variable to '1' will renew LAN3's (RF Public) lease time for its current IP address. Applicable only when NAT is enabled.
| |||||||||||||
| SnatDhcpRelease | 1.3.6.1.4.1.161.19.3.3.2.205 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting the variable to '1' will release WAN's (NAT Public) IP address and send a DHCP Release Message to the DHCP server. Applicable only when NAT is enabled.
| |||||||||||||
| SnatDhcpRenew | 1.3.6.1.4.1.161.19.3.3.2.206 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting the variable to '1' will renew WAN's (NAT Public) lease time for its current IP address. Applicable only when NAT is enabled.
| |||||||||||||
| Sregion | 1.3.6.1.4.1.161.19.3.3.2.207 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Set Region Code for the Unit.
| |||||||||||||
| SregionAsia | 1.3.6.1.4.1.161.19.3.3.2.208 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Country Code for Asia.
| |||||||||||||
| SregionEurope | 1.3.6.1.4.1.161.19.3.3.2.209 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Country Code for Europe. Other is only available for units with EU Region Lock.
| |||||||||||||
| SregionNorthAmerica | 1.3.6.1.4.1.161.19.3.3.2.210 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Country Code for North America.
| |||||||||||||
| SregionOceania | 1.3.6.1.4.1.161.19.3.3.2.211 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Country Code for Oceania.
| |||||||||||||
| SregionSouthAmerica | 1.3.6.1.4.1.161.19.3.3.2.212 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Country Code for South America.
| |||||||||||||
| SregionOtherRegulatory | 1.3.6.1.4.1.161.19.3.3.2.213 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Regulatory setting for governing regulatory body.
| |||||||||||||
| Sinterleave | 1.3.6.1.4.1.161.19.3.3.2.214 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Engineering use only.
| |||||||||||||
| SreceiveQualityDebug | 1.3.6.1.4.1.161.19.3.3.2.215 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable or disable receive quality calculations for every packet. Enabling(1) will calulate receive quality on all receiving packets. Due to load on CPU, will slightly packet per second capabilities on AP/BH. Default to disabled for all radios. Only applicable to GenII OFDM products and up.
| |||||||||||||
| SapType | 1.3.6.1.4.1.161.19.3.3.2.216 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current In standard mode, all possible sync sources will be made availble and usedfor autoSync operation. In remote mode, sync over power port will not be available as a sync source. Remote Device mode is where the AP or BHM timing port is connected to an SM or BHS timing port via a sync cable. In this mode, GPS data is unavailable and sync over power port shouldn't be used. If sync over power is desired, and a CMM or other sync over power device is in use, then select standard mode. On 450b PTP BHM, this mode cannot be enabled while Sync Aux Port Config is set to Output or Alignment Tone, because these signals share a physical pin with the sync input signal. On MicroPoP, this feature does not have hardware support.
| |||||||||||||
| SregionAfrica | 1.3.6.1.4.1.161.19.3.3.2.217 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Country Code for Africa.
| |||||||||||||
| SaddCustomFreqMimo | 1.3.6.1.4.1.161.19.3.3.2.218 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Frequency input ie) 3700.50. Deprecated, please use 'addCustomFreqList'. | |||||||||||||
| SremoveCustomFreqMimo | 1.3.6.1.4.1.161.19.3.3.2.219 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Frequency input ie) 3700.50. Deprecated, please use 'removeCustomFreqList'. | |||||||||||||
| StimedSpectrumAnalysisDurationBox | 1.3.6.1.4.1.161.19.3.3.2.220 | INTEGER (10..1000) | RW | ||||||||||
scalar · INTEGER (10..1000) · read-write · current Value in seconds for a timed spectrum analysis. Range is 10-1000 seconds. Note that this represents the minimum scan duration. The current scan will still be allowed to complete when this duration is elapsed, so actual scan time could be longer. | |||||||||||||
| SspectrumAnalysisActionBox | 1.3.6.1.4.1.161.19.3.3.2.221 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Start or stop timed or continuous Spectrum Analysis and also give status. (0) - Stop Spectrum Analysis (1) - Start Timed Spectrum Analysis Note: AP/BHM will run Spectrum Analysis for the sector. (2) - Start Continuous Spectrum Analysis (3) - Idle, no Spectrum Analysis results. (4) - Idle, Spectrum Analysis results available. (5) - Timed or Remote Spectrum Analysis in progress. (6) - Continuous Spectrum Analysis in progress. Note: Continuous mode has a max of 24 hours. (7) - Spectrum Analyzer not ready. (8) - Set minimum and maximum frequencies to full scan.
| |||||||||||||
| Smac1VIDMapPriority | 1.3.6.1.4.1.161.19.3.3.2.222 | INTEGER (0..7) | RW | ||||||||||
scalar · INTEGER (0..7) · read-write · current VID priority for Entry 1 in MAC Address VID Mapping Table. | |||||||||||||
| Smac1VIDMapPriorityMode | 1.3.6.1.4.1.161.19.3.3.2.223 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current VID priority Mode for Entry 1 in MAC Address VID Mapping Table.
| |||||||||||||
| Smac2VIDMapPriority | 1.3.6.1.4.1.161.19.3.3.2.224 | INTEGER (0..7) | RW | ||||||||||
scalar · INTEGER (0..7) · read-write · current VID priority for Entry 2 in MAC Address VID Mapping Table. | |||||||||||||
| Smac2VIDMapPriorityMode | 1.3.6.1.4.1.161.19.3.3.2.225 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current VID priority Mode for Entry 2 in MAC Address VID Mapping Table.
| |||||||||||||
| Smac3VIDMapPriority | 1.3.6.1.4.1.161.19.3.3.2.226 | INTEGER (0..7) | RW | ||||||||||
scalar · INTEGER (0..7) · read-write · current VID priority for Entry 3 in MAC Address VID Mapping Table. | |||||||||||||
| Smac3VIDMapPriorityMode | 1.3.6.1.4.1.161.19.3.3.2.227 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current VID priority Mode for Entry 3 in MAC Address VID Mapping Table.
| |||||||||||||
| Smac4VIDMapPriority | 1.3.6.1.4.1.161.19.3.3.2.228 | INTEGER (0..7) | RW | ||||||||||
scalar · INTEGER (0..7) · read-write · current VID priority for Entry 4 in MAC Address VID Mapping Table. | |||||||||||||
| Smac4VIDMapPriorityMode | 1.3.6.1.4.1.161.19.3.3.2.229 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current VID priority Mode for Entry 4 in MAC Address VID Mapping Table.
| |||||||||||||
| Smac5VIDMapPriority | 1.3.6.1.4.1.161.19.3.3.2.230 | INTEGER (0..7) | RW | ||||||||||
scalar · INTEGER (0..7) · read-write · current VID priority for Entry 5 in MAC Address VID Mapping Table. | |||||||||||||
| Smac5VIDMapPriorityMode | 1.3.6.1.4.1.161.19.3.3.2.231 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current VID priority Mode for Entry 5 in MAC Address VID Mapping Table.
| |||||||||||||
| Smac6VIDMapPriority | 1.3.6.1.4.1.161.19.3.3.2.232 | INTEGER (0..7) | RW | ||||||||||
scalar · INTEGER (0..7) · read-write · current VID priority for Entry 6 in MAC Address VID Mapping Table. | |||||||||||||
| Smac6VIDMapPriorityMode | 1.3.6.1.4.1.161.19.3.3.2.233 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current VID priority Mode for Entry 6 in MAC Address VID Mapping Table.
| |||||||||||||
| Smac7VIDMapPriority | 1.3.6.1.4.1.161.19.3.3.2.234 | INTEGER (0..7) | RW | ||||||||||
scalar · INTEGER (0..7) · read-write · current VID priority for Entry 7 in MAC Address VID Mapping Table. | |||||||||||||
| Smac7VIDMapPriorityMode | 1.3.6.1.4.1.161.19.3.3.2.235 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current VID priority Mode for Entry 7 in MAC Address VID Mapping Table.
| |||||||||||||
| Smac8VIDMapPriority | 1.3.6.1.4.1.161.19.3.3.2.236 | INTEGER (0..7) | RW | ||||||||||
scalar · INTEGER (0..7) · read-write · current VID priority for Entry 8 in MAC Address VID Mapping Table. | |||||||||||||
| Smac8VIDMapPriorityMode | 1.3.6.1.4.1.161.19.3.3.2.237 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current VID priority Mode for Entry 8 in MAC Address VID Mapping Table.
| |||||||||||||
| Smac9VIDMapPriority | 1.3.6.1.4.1.161.19.3.3.2.238 | INTEGER (0..7) | RW | ||||||||||
scalar · INTEGER (0..7) · read-write · current VID priority for Entry 9 in MAC Address VID Mapping Table. | |||||||||||||
| Smac9VIDMapPriorityMode | 1.3.6.1.4.1.161.19.3.3.2.239 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current VID priority Mode for Entry 9 in MAC Address VID Mapping Table.
| |||||||||||||
| Smac10VIDMapPriority | 1.3.6.1.4.1.161.19.3.3.2.240 | INTEGER (0..7) | RW | ||||||||||
scalar · INTEGER (0..7) · read-write · current VID priority for Entry 10 in MAC Address VID Mapping Table. | |||||||||||||
| Smac10VIDMapPriorityMode | 1.3.6.1.4.1.161.19.3.3.2.241 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current VID priority Mode for Entry 10 in MAC Address VID Mapping Table.
| |||||||||||||
| SmanagementVIDPriority | 1.3.6.1.4.1.161.19.3.3.2.242 | INTEGER (0..7) | RW | ||||||||||
scalar · INTEGER (0..7) · read-write · current management VID VID VLAN Priority. | |||||||||||||
| SmanagementVIDPriorityMode | 1.3.6.1.4.1.161.19.3.3.2.243 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current management VID VLAN Priority Mode.
| |||||||||||||
| SremarkSrcVID | 1.3.6.1.4.1.161.19.3.3.2.244 | INTEGER (1..4094) | RW | ||||||||||
scalar · INTEGER (1..4094) · read-write · current Source VID to apply remarking on. | |||||||||||||
| SaddRemarkVID | 1.3.6.1.4.1.161.19.3.3.2.245 | INTEGER (1..4094) | RW | ||||||||||
scalar · INTEGER (1..4094) · read-write · current Add VLAN ID re-marking entry. | |||||||||||||
| SaddRemarkPriority | 1.3.6.1.4.1.161.19.3.3.2.246 | INTEGER (0..7) | RW | ||||||||||
scalar · INTEGER (0..7) · read-write · current Add 802.1p re-mark entry. | |||||||||||||
| SdeleteRemarkVID | 1.3.6.1.4.1.161.19.3.3.2.247 | INTEGER (1..4094) | RW | ||||||||||
scalar · INTEGER (1..4094) · read-write · current Remove the VID re-marking for this source VID. | |||||||||||||
| SdeleteRemarkPriority | 1.3.6.1.4.1.161.19.3.3.2.248 | INTEGER (1..4094) | RW | ||||||||||
scalar · INTEGER (1..4094) · read-write · current Remove the priority re-marking for this source VID. | |||||||||||||
| SmimoRateAdaptAlgorithm | 1.3.6.1.4.1.161.19.3.3.2.249 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Control MIMO Rate Adapt Algorithm 0 = MIMO-A/B This chooses MIMO-A or MIMO-B dynamically to maximize throughput 1 = MIMO-B only 2 = MIMO-A only
| |||||||||||||
| ScontrolMessages | 1.3.6.1.4.1.161.19.3.3.2.250 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Control Messages (Beacon/Scheduling Map/Acknowledgements/Broadcast) 0 = MIMO-A 1 = SISO MIMO-A Control Messages is the recommended and default setting. However, SISO Control Messages can be helpful in talking to subscribers on releases previous to 13.2, which operated in this mode. Not applicable to PMP 450m. As of 16.1, PMP 430 SMs are no longer supported on the 450 platform. On that release and forward, this OID is read-only and returns MIMO-A.
| |||||||||||||
| SenableSecurityBanner | 1.3.6.1.4.1.161.19.3.3.2.251 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Shows Security Banner at the time of login
| |||||||||||||
| SvcDepthDownlink | 1.3.6.1.4.1.161.19.3.3.2.252 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current VC Depth in the downlink Not currently supported with 450m.
| |||||||||||||
| StextSecurityBanner | 1.3.6.1.4.1.161.19.3.3.2.253 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Security Banner to be dispalyed on login page. Length should be maximum 1200 characters.Configuration from web UI can enter upto 1499 characters. Only ASCII characters(0-9a-zA-Z,CR,LF) supported. | |||||||||||||
| SacceptSecurityBanner | 1.3.6.1.4.1.161.19.3.3.2.254 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current 1: User must accept and acknowledge security banner before login. 0: Accepting security banner is not mandatory and user can login without it.
| |||||||||||||
| SpoeT2Classification | 1.3.6.1.4.1.161.19.3.3.2.255 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current When disabled, the radio will ignore the 802.3at Type 2 classification. When enabled, if 802.3at Type 2 PoE is not present, the board will start and log the problem but the transmitter and PoE out will not be enabled due to the low input power. This is only available on the 450i.
| |||||||||||||
| SsimulatedAirDelay | 1.3.6.1.4.1.161.19.3.3.2.256 | INTEGER (0..65535) | RW | ||||||||||
scalar · INTEGER (0..65535) · read-write · current Simulated Air Delay. Engineering use only. | |||||||||||||
| ScnMaestroEnable | 1.3.6.1.4.1.161.19.3.3.2.257 | INTEGER | RW | enable(1) | |||||||||
scalar · INTEGER · read-write · current Enable Remote management using cnMaestro.
Example values from LibreNMS test devices
| |||||||||||||
| ScnMaestroUrl | 1.3.6.1.4.1.161.19.3.3.2.258 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current cnMaestro Server URL. | |||||||||||||
| ScamID | 1.3.6.1.4.1.161.19.3.3.2.259 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Cambium Id for cnMaestro onboarding. | |||||||||||||
| ScamOnboardKey | 1.3.6.1.4.1.161.19.3.3.2.260 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Onboarding key for cnMaestro onboarding. | |||||||||||||
| SatexHazlocPowerLimit | 1.3.6.1.4.1.161.19.3.3.2.261 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current If radio is keyed for ATEX/HazLoc operation, these settings can be used to limit maximum power output, per Gas Group specs.
| |||||||||||||
| SnearFieldRange | 1.3.6.1.4.1.161.19.3.3.2.262 | INTEGER (6..3000) | RW | ||||||||||
scalar · INTEGER (6..3000) · read-write · current Range in feet for near field operation. This is applied only when nearFieldOperation is set to enable(1) and eirp is 22dBm or below or when Engineering keyed. The maximum range of 3000ft applies negligible correction. PMP 450m only.
| |||||||||||||
| SnearFieldOperation | 1.3.6.1.4.1.161.19.3.3.2.263 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables operation in the near field. This is effective only when an EIRP of 22 dBm or lower is selected or when Engineering keyed. PMP 450m only.
| |||||||||||||
| SdefaultIPAccessEnable | 1.3.6.1.4.1.161.19.3.3.2.264 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable(1) or Disable(0) Default alternative LAN1 IP address
| |||||||||||||
| SpingWdogEnable | 1.3.6.1.4.1.161.19.3.3.2.265 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current enable(1) or disable(0) ping watchdog.
| |||||||||||||
| SpingWdogIP | 1.3.6.1.4.1.161.19.3.3.2.266 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current IPv4 address to ping in dotted decimal notation. | |||||||||||||
| SpingWdogInterval | 1.3.6.1.4.1.161.19.3.3.2.267 | INTEGER (30..86400) | RW | ||||||||||
scalar · INTEGER (30..86400) · read-write · current Intervals in seconds at which ping should be initiated.
| |||||||||||||
| SpingWdogRbtCnt | 1.3.6.1.4.1.161.19.3.3.2.268 | INTEGER (1..100) | RW | ||||||||||
scalar · INTEGER (1..100) · read-write · current Ping Failures count at which reboot should be initiated. | |||||||||||||
| SdisableAes128 | 1.3.6.1.4.1.161.19.3.3.2.269 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Disables the availability of AES-128 bit authentication and encryption 0 - AES-128 algorithm is available. 1 - AES-128 algorithm is disabled. This value becomes read-only when a reboot is required. Pending reboots should be completed before making changes to this parameter. Caution 1: Setting this attribute may result in previously working links no longer forming. Caution 2: A change of value to this attribute has immediate effect - no reboot required.
| |||||||||||||
| SforceReassessment | 1.3.6.1.4.1.161.19.3.3.2.275 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Forces channel reassessment for all registered SMs. This is effective only when an EIRP of 22 dBm or lower is selected or when Engineering keyed. MU-MIMO only.
| |||||||||||||
| Senable8023linkBox | 1.3.6.1.4.1.161.19.3.3.2.276 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To enable or disable 802.3 link.
| |||||||||||||
| SethernetBounceTimeout | 1.3.6.1.4.1.161.19.3.3.2.277 | INTEGER (0..60) | RW | ||||||||||
scalar · INTEGER (0..60) · read-write · current Ethernet Bounce time out Range : 0 -- 60 Minutes, zero for disabling the feature.
| |||||||||||||
| SethernetPortSelection | 1.3.6.1.4.1.161.19.3.3.2.278 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set/Get the Ethernet port used to bridge traffic. PMP 450m only.
| |||||||||||||
| SethernetLinkSpeedSfp | 1.3.6.1.4.1.161.19.3.3.2.279 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set/Get Ethernet link speed and duplex settings of the SFP port. PMP 450m only. Please note that the Radio Recovery Console only supports auto1000F for the SFP.
| |||||||||||||
| SidleTrafficEnable | 1.3.6.1.4.1.161.19.3.3.2.280 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Idle Traffic Enable Config 0: Disabled 1: Enabled Engineering use only.
| |||||||||||||
| SidleTrafficSize | 1.3.6.1.4.1.161.19.3.3.2.281 | INTEGER (64..1518) | RW | ||||||||||
scalar · INTEGER (64..1518) · read-write · current Idle Traffic Packet Size Engineering use only. | |||||||||||||
| ScustomSpecAnalyzerMinFreqSnmp | 1.3.6.1.4.1.161.19.3.3.2.282 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Minimum custom frequency value in kHz. | |||||||||||||
| ScustomSpecAnalyzerMaxFreqSnmp | 1.3.6.1.4.1.161.19.3.3.2.283 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Maximum custom frequency value in kHz. | |||||||||||||
| SminModRate | 1.3.6.1.4.1.161.19.3.3.2.284 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Minimum Modulation Rate parameter 0: 1x (MIMO-A QPSK) 1: 2x (MIMO-A QPSK 16-QAM, MIMO-B QPSK) 2: 3x (MIMO-A 64-QAM, and MIMO-B 8-QAM) 3: 4x (MIMO-A 256-QAM, and MIMO-B 16-QAM) 4: 6x (MIMO-B 64-QAM) 5: 8x (MIMO-B 256-QAM) 6: 5x (MIMO-B 32-QAM) 7: 7x (MIMO-B 128-QAM) PTP 450 platform only. Enabling this will prevent the link from bridging traffic when the transmit modulation rate is below this level. This option can be used for redundant PTP links with spanning tree. When the rate drops below this minimum modulation rate, the Ethernet link will be disabled for half a second. This is to alert spanning tree protocols that the link is not up. Enabling this option will also add a small amount of continuous low priority traffic when the link is idle. This is done to ensure the modulation rate is current over the RF link. Use with caution.
| |||||||||||||
| SrateAdaptPerLuid | 1.3.6.1.4.1.161.19.3.3.2.285 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enabling this (default) sets Rate Adapt per LUID mode. Disabling this sets Rate Adapt per VC mode. Engineering Key only.
| |||||||||||||
| SspectrumAnalysisOnBoot | 1.3.6.1.4.1.161.19.3.3.2.286 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To enable or disable Spectrum Analysis on boot up for one scan through the band. (0) - Disabled (1) - Enabled
| |||||||||||||
| SqosGroupingLevel | 1.3.6.1.4.1.161.19.3.3.2.287 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current PMP 450m only. 0 = Group Low Priority Data Channels 1 = Group Low and Medium Priority Data Channels 2 = Group Low, Medium and High Priority Data Channels 3 = Group All Data Channels
| |||||||||||||
| SendPointMode | 1.3.6.1.4.1.161.19.3.3.2.288 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Endpoint mode: Point-To-Multipoint or Point-to-Point(Backhaul). 450i and 450b PTP keyed models only. This OID can switch a PTP into PMP SM mode (and vice versa) Reboot is required after this change. Setting to Factory Defaults, does not change this parameter.
| |||||||||||||
| SremoteDeviceType | 1.3.6.1.4.1.161.19.3.3.2.289 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current If this radio is being used to give sync to a remote device, then this option must indicate what type that device is, PMP/PTP 100 or all other types. This is currently not implemented on 450m, APs, and BHMs. 1 = PMP/PTP 100 0 = Other
| |||||||||||||
| SgpsOutputEn | 1.3.6.1.4.1.161.19.3.3.2.290 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls what the AUX port will be configured to do. On all AP/BHM's except for 450b and 450v, there are two options: 0(off) Sync Input (default value) or 1(on) Sync Output. On 450v AP, there are two options: 1(on) Sync Output or 2(input) Sync Input (default value). On 450b or 450v BHM, there are three options: 0(off) Alignment Tone (default value), 1(on) Sync Output, or 2(input) Sync Input. On 450b or 450v SM/BHS, there are three options: 0(off) Alignment Tone (default value), 1(on) Sync Output, or 2(input) GPS Data.
| |||||||||||||
| SvlanSM8021pSupport | 1.3.6.1.4.1.161.19.3.3.2.291 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Support for 802.1p VLAN ID Zero.
| |||||||||||||
| SsshStatus | 1.3.6.1.4.1.161.19.3.3.2.292 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This variable determines if ssh server is enabled or not. 0: Disable SSH server 1: Enable SSH server
| |||||||||||||
| SmicroPoPGPSSyncSearchMode | 1.3.6.1.4.1.161.19.3.3.2.293 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Set the GNSS search mode. This is a + separate string of possible names GPS, GLONASS, Galileo, and Beidou. For example, setting to GPS+GLONASS+Galileo will enable GPS GLONASS, and Galileo systems while GPS will only enable GPS system. Note that some of these may be rejected if they are not allowed due to regulatory reasons. | |||||||||||||
| SlldpVlanTagging | 1.3.6.1.4.1.161.19.3.3.2.294 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configures LLDP to be always untagged or follow VLAN MVID Configuration.
| |||||||||||||
| SbpduFilter | 1.3.6.1.4.1.161.19.3.3.2.295 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To set BPDU packets filter when NAT is disabled.
| |||||||||||||
| SingressVIDBox | 1.3.6.1.4.1.161.19.3.3.2.296 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Untagged ingress VID. | |||||||||||||
| SingressVIDPriorityBox | 1.3.6.1.4.1.161.19.3.3.2.297 | INTEGER (0..7) | RW | ||||||||||
scalar · INTEGER (0..7) · read-write · current ingress VID VLAN Priority. | |||||||||||||
| SingressVIDPriorityModeBox | 1.3.6.1.4.1.161.19.3.3.2.298 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current ingress VID VLAN Priority Mode.
| |||||||||||||
| Snomadic | 1.3.6.1.4.1.161.19.3.3.2.300 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This enables or disables nomadic mode, which allows SMs to move at a slow speed and maintain the session with the AP. Feature Key required to enable on AP. Needs to be enabled on both SM and AP to function. PMP only. Not currently supported on 450m.
| |||||||||||||
| ScnMaestroCertValidation | 1.3.6.1.4.1.161.19.3.3.2.304 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current cnMaestro server certficate validation. 1. Only cnMaestro cloud server certificate will be validated, this is the default setting. 2. Both cnMaestro cloud and On-Premises server certificates will be validated.
| |||||||||||||
| SfccStaFrequencies | 1.3.6.1.4.1.161.19.3.3.2.305 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Returns 1 if AP/BHM is allowed to run the FCC Special Temporary Authority UNII-3 Band Extension 5850 - 5895 MHz. Note: In order to access the FCC STA frequencies, the operator must have an STA license. Using these frequencies without an STA license is a violation of the FCC rules. Please contact [email protected] for more information. Setting to a 1 will enable the STA frequencies, setting to a 0 will disable the STA frequencies. Only valid for 5 GHz FCC AP/BHM radios.
| |||||||||||||
| ScsrfSetting | 1.3.6.1.4.1.161.19.3.3.2.306 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current 0: Default Cross-site Request Forgery(CSRF) protection (currently disabled, in future software
version the default CSRF setting will be treated as enabled).
1: Disable Cross-site Request Forgery(CSRF) protection.
2: Enable Cross-site Request Forgery(CSRF) protection.
| |||||||||||||
| ShorizontalUncertainty | 1.3.6.1.4.1.161.19.3.3.2.307 | INTEGER (0..450) | RW | ||||||||||
scalar · INTEGER (0..450) · read-write · current Horizontal distance between the GPS receiver antenna and the device in meters. This is required only if the radio detects an external GPS source. | |||||||||||||
| SverticalUncertainty | 1.3.6.1.4.1.161.19.3.3.2.308 | INTEGER (0..250) | RW | ||||||||||
scalar · INTEGER (0..250) · read-write · current Vertical distance between the GPS receiver antenna and the device in meters. This is required only if the radio detects an external GPS source. | |||||||||||||
| SafcOcspStapling | 1.3.6.1.4.1.161.19.3.3.2.311 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables OCSP Stapling while communicating with AFC system. Engineering use only.
| |||||||||||||
| SbridgeUpstreamInterface | 1.3.6.1.4.1.161.19.3.3.2.312 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Bridge Upstream Interface. Devices seen incoming frmo this interface are not kept in the bridge. When the device cannot find an entry in the bridge, the device will forward the packet to this default interface. Default for PMP is Main Ethernet for AP and RF for SM. Default for PTP is RF for both sides. Options are Main Ethernet (260), Aux Ethernet (265), SFP+ (266), RF (257).
| |||||||||||||
| SlldpAdminMode | 1.3.6.1.4.1.161.19.3.3.2.313 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configures LLDP to be on, transmit only, receive only, or disabled.
| |||||||||||||
| SlldpPassthrough | 1.3.6.1.4.1.161.19.3.3.2.314 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables bridging of LLDP packets
| |||||||||||||
| SpasswdMinimumLengthRule | 1.3.6.1.4.1.161.19.3.3.2.315 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current 0: No minimum password length validation. 1: Password must be at least 8 characters long.
| |||||||||||||
| SpasswdCharacterTypes | 1.3.6.1.4.1.161.19.3.3.2.316 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current 0: No mandatory character validation for password. 1: Password must contain at least one lowercase letter, one uppercase letter, one digit and one special character.
| |||||||||||||
| SpasswdUsernameInclusion | 1.3.6.1.4.1.161.19.3.3.2.317 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current 0: Enable the password can contain the username. 1: Disable the password must not contain the username.
| |||||||||||||
| ShistoryRule | 1.3.6.1.4.1.161.19.3.3.2.318 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current 0: Disable the password history validation. 1: Password cannot be one of the last 3 used passwords.
| |||||||||||||
| SpasswdMustChange | 1.3.6.1.4.1.161.19.3.3.2.319 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current 0: The user need not change the password immediately. 1: Force the user to change password if the rules are not fulfilled.
| |||||||||||||
| SremoteUserLoginRules | 1.3.6.1.4.1.161.19.3.3.2.320 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current 0: No validation on remote login user password upon login. 1: validate remote login user password upon login.
| |||||||||||||
| SuserChangePassword | 1.3.6.1.4.1.161.19.3.3.2.321 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current 1 = User must change password at first login. 0 = (default) no need to change the password.
| |||||||||||||
| SvcDepthUplink | 1.3.6.1.4.1.161.19.3.3.2.322 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current VC Depth in the uplink Not currently supported with 450m.
| |||||||||||||
| SinsecureProtocols | 1.3.6.1.4.1.161.19.3.3.2.323 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This variable determines if insecure protocols namely HTTP, Telnet, FTP, SSH, NTP, TFTP, SNMPv2 are allowed. 0: Default 1: Allow 2: Deny
| |||||||||||||
| SpasswordMaxFailedAttempts | 1.3.6.1.4.1.161.19.3.3.2.324 | INTEGER (0..10) | RW | ||||||||||
scalar · INTEGER (0..10) · read-write · current Max successive failed attempts to qualify for a password lock out
| |||||||||||||
| SpasswordFailedAttemptTraceDuration | 1.3.6.1.4.1.161.19.3.3.2.325 | INTEGER (60..300) | RW | ||||||||||
scalar · INTEGER (60..300) · read-write · current Duration to monitor successive password failed attempts
| |||||||||||||
| SpasswordLockoutDuration | 1.3.6.1.4.1.161.19.3.3.2.326 | INTEGER (60..300) | RW | ||||||||||
scalar · INTEGER (60..300) · read-write · current Duration for the password lockout
| |||||||||||||
| SicmpArpRateLoggingThreshold | 1.3.6.1.4.1.161.19.3.3.2.327 | Unsigned32 (1..10000) | RW | ||||||||||
scalar · Unsigned32 (1..10000) · read-write · current Specifies the threshold rate (packets per minute) for ICMP/ARP traffic monitoring. A syslog alert is generated if the packet rate exceeds this value. | |||||||||||||
| SicmpArpRateLoggingDuration | 1.3.6.1.4.1.161.19.3.3.2.328 | Unsigned32 (0..15) | RW | ||||||||||
scalar · Unsigned32 (0..15) · read-write · current Specifies the monitoring duration (in minutes) for ICMP/ARP traffic. A syslog alert is generated if the packet rate exceeds the configured threshold during this period. | |||||||||||||
| SstrictTransportSecurityExpiryTime | 1.3.6.1.4.1.161.19.3.3.2.333 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Expiry time for Strict Transport Security (RFC 6797) in seconds, 0 to disable | |||||||||||||
| NwhispBoxControls | 1.3.6.1.4.1.161.19.3.3.3 | ||||||||||||
| SsaveFlash | 1.3.6.1.4.1.161.19.3.3.3.1 | INTEGER | RW | obsolete | |||||||||
scalar · INTEGER · read-write · obsolete This variable is currently deprecated.
| |||||||||||||
| Sreboot | 1.3.6.1.4.1.161.19.3.3.3.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting the variable to 1 will reboot the unit. When the unit finishes rebooting, it will be in finishedReboot state. Setting the variable to 2 will perform a full reboot of a 450i radio, while performing a normal reboot on other radios.
| |||||||||||||
| SclearEventLog | 1.3.6.1.4.1.161.19.3.3.3.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting the variable to 1 will clear the event log.
| |||||||||||||
| SrebootIfRequired | 1.3.6.1.4.1.161.19.3.3.3.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting the variable to 1 will reboot the unit if reboot is required.
| |||||||||||||
| SclearBERStats | 1.3.6.1.4.1.161.19.3.3.3.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set to clear the BER statistics by sending a 'clearBERStats'. Value is set back to 'doNotClearBERStats' When action is complete.
| |||||||||||||
| SupdateDevice | 1.3.6.1.4.1.161.19.3.3.3.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Use to update the software on the device
| |||||||||||||
| SimportConfigFile | 1.3.6.1.4.1.161.19.3.3.3.7 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Set to URL to immediately download and apply configuration file | |||||||||||||
| SexportConfigFile | 1.3.6.1.4.1.161.19.3.3.3.8 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Set to URL to immediately export and upload configuration file | |||||||||||||
| SundoUnitWideSavedChanges | 1.3.6.1.4.1.161.19.3.3.3.9 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting to 1 will undo unit wide saved changes
| |||||||||||||
| SresetPoEAux | 1.3.6.1.4.1.161.19.3.3.3.10 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting to 1 will reset Aux Ethernet port PoE on 450i or 450m radio. Port will be powered off for 2 seconds during the set call, which will delay the SNMP response.
| |||||||||||||
| SclearEthernetStats | 1.3.6.1.4.1.161.19.3.3.3.11 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting to 1 will clear Ethernet stats.
| |||||||||||||
| SclearRadioStats | 1.3.6.1.4.1.161.19.3.3.3.12 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting to 1 will clear Radio stats.
| |||||||||||||
| SethernetPortAction | 1.3.6.1.4.1.161.19.3.3.3.13 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting:
1 - This will bounce the Main Ethernet Port. A 5 minute lockout period will follow a successful port bounce.
A port bounce attempt during lockout period will result in Error response.
If port is not supported or disabled this will also result in Error response.
2 - This will bounce the Aux Ethernet Port. A 5 minute lockout period will follow a successful port bounce.
A port bounce attempt during lockout period will result in Error response.
If port is not supported or disabled this will also result in Error response.
Applicable only to select platforms that support this interface.
4 - This will bounce the SFP Ethernet Port. A 5 minute lockout period will follow a successful port bounce.
A port bounce attempt during lockout period will result in Error response.
If port is not supported or disabled this will also result in Error response.
Applicable only to select platforms that support this interface.
Getting:
Bit position 1:
0 - Initiating this action is permitted.
1 - Currently in lockout or Main Ethernet Port is not available - initiating this action will return an Error.
Bit position 2:
0 - Initiating this action is permitted.
1 - Currently in lockout or Aux Ethernet Port is not available - initiating this action will return an Error.
Bit position 3:
0 - Initiating this action is permitted.
1 - Currently in lockout or SFP Ethernet Port is not available - initiating this action will return an Error.
| |||||||||||||
| Stxpowertemperatureupdate | 1.3.6.1.4.1.161.19.3.3.3.14 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Force an update to the transmit power based upon the current temperature. AP or BH only. Engineering use only. | |||||||||||||
| TwhispBoxBridgeTable | 1.3.6.1.4.1.161.19.3.3.4 | NA | |||||||||||
table · not-accessible · current Bridge table. | |||||||||||||
| RwhispBoxBridgeEntry | 1.3.6.1.4.1.161.19.3.3.4.1 | NA | |||||||||||
| CwhispBridgeMacAddr | 1.3.6.1.4.1.161.19.3.3.4.1.1 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current MAC Address of the registered entity. | |||||||||||||
| CwhispBridgeDesLuid | 1.3.6.1.4.1.161.19.3.3.4.1.2 | WhispLUID | RO | ||||||||||
column · WhispLUID · read-only · current This is the Local Unit Identifier assigned to Subscriber Modems. | |||||||||||||
| CwhispBridgeAge | 1.3.6.1.4.1.161.19.3.3.4.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Table entry last access age in minutes. | |||||||||||||
| CwhispBridgeExt | 1.3.6.1.4.1.161.19.3.3.4.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Timeout extension flag for entries which also reside in the PNA APR cache. | |||||||||||||
| CwhispBridgeHash | 1.3.6.1.4.1.161.19.3.3.4.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Hash table array index. | |||||||||||||
| CwhispBridge802OneXStatus | 1.3.6.1.4.1.161.19.3.3.4.1.6 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current 802.1x Authentication Status | |||||||||||||
| CwhispBridgeCAM | 1.3.6.1.4.1.161.19.3.3.4.1.7 | INTEGER | RO | obsolete | |||||||||
column · INTEGER · read-only · obsolete This entry is deprecated. | |||||||||||||
| NwhispBoxEventLog | 1.3.6.1.4.1.161.19.3.3.5 | ||||||||||||
| SwhispBoxEvntLog | 1.3.6.1.4.1.161.19.3.3.5.1 | EventString | RO | ||||||||||
scalar · EventString · read-only · current Event log for AP and SM. | |||||||||||||
| NwhispBoxConf | 1.3.6.1.4.1.161.19.3.3.6 | ||||||||||||
| NwhispBoxGroups | 1.3.6.1.4.1.161.19.3.3.6.1 | ||||||||||||
| GwhispBoxAttributesGroup | 1.3.6.1.4.1.161.19.3.3.6.1.1 | ||||||||||||
group · current Canopy Box Level Attributes group.
| |||||||||||||
| GwhispBoxControlGroup | 1.3.6.1.4.1.161.19.3.3.6.1.2 | ||||||||||||
group · current Canopy Box Level control group.
| |||||||||||||
| GwhispBoxBTGroup | 1.3.6.1.4.1.161.19.3.3.6.1.3 | ||||||||||||
group · current Canopy Box Bridging Table group. | |||||||||||||
| GwhispBoxVLANTableGroup | 1.3.6.1.4.1.161.19.3.3.6.1.4 | ||||||||||||
| GwhispBoxCPTableGroup | 1.3.6.1.4.1.161.19.3.3.6.1.5 | ||||||||||||
group · current Code Point Table group.
| |||||||||||||
| GwhispBoxUserTableGroup | 1.3.6.1.4.1.161.19.3.3.6.1.6 | ||||||||||||
group · current Canopy Box User Information Table group.
| |||||||||||||
| GwhispLayer2NeighborTableGroup | 1.3.6.1.4.1.161.19.3.3.6.1.7 | ||||||||||||
group · current Canopy Box Layer 2 Neighbor information.
| |||||||||||||
| GwhispBoxNotifGroup | 1.3.6.1.4.1.161.19.3.3.6.1.8 | ||||||||||||
group · current Canopy Box Notification Group. | |||||||||||||
| GwhispBoxVLANRemarkTableGroup | 1.3.6.1.4.1.161.19.3.3.6.1.9 | ||||||||||||
group · current Canopy Box VLAN Remarking Table group. | |||||||||||||
| GwhispBoxSNMPv3Group | 1.3.6.1.4.1.161.19.3.3.6.1.10 | ||||||||||||
group · current Canopy Box SNMPv3 Group.
| |||||||||||||
| GwhispBoxLinkTestGroup | 1.3.6.1.4.1.161.19.3.3.6.1.11 | ||||||||||||
group · current Canopy Box Link Test group.
| |||||||||||||
| GwhispBoxL3PVIDMapTableGroup | 1.3.6.1.4.1.161.19.3.3.6.1.12 | ||||||||||||
group · current Canopy Box L3 PVID Mapping Table group. | |||||||||||||
| GwhispBoxCBRSGroup | 1.3.6.1.4.1.161.19.3.3.6.1.13 | ||||||||||||
group · current Canopy Box Citizens Broadband Radio Service (CBRS) group. | |||||||||||||
| GwhispMACAddressFilterGroup | 1.3.6.1.4.1.161.19.3.3.6.1.14 | ||||||||||||
group · current Canopy MAC Address Filtering config group. | |||||||||||||
| NwhispBoxBridgeVar | 1.3.6.1.4.1.161.19.3.3.7 | ||||||||||||
| SwhispBridgeTbUsed | 1.3.6.1.4.1.161.19.3.3.7.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of used entries in bridging table. | |||||||||||||
| SwhispBridgeTbFree | 1.3.6.1.4.1.161.19.3.3.7.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of free entries in bridging table. | |||||||||||||
| SwhispBridgeTbErr | 1.3.6.1.4.1.161.19.3.3.7.3 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Bridging table errors. | |||||||||||||
| TwhispVLANTable | 1.3.6.1.4.1.161.19.3.3.8 | NA | |||||||||||
table · not-accessible · current VLAN member table. | |||||||||||||
| RwhispVLANEntry | 1.3.6.1.4.1.161.19.3.3.8.1 | NA | |||||||||||
| CwhispVID | 1.3.6.1.4.1.161.19.3.3.8.1.1 | INTEGER (1..4095) | RO | ||||||||||
column · INTEGER (1..4095) · read-only · current VLAN member ID. | |||||||||||||
| CwhispVType | 1.3.6.1.4.1.161.19.3.3.8.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current VLAN member type. | |||||||||||||
| CwhispVAge | 1.3.6.1.4.1.161.19.3.3.8.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current VLAN member age. | |||||||||||||
| NwhispBoxCPVar | 1.3.6.1.4.1.161.19.3.3.9 | ||||||||||||
| ScodePoint0 | 1.3.6.1.4.1.161.19.3.3.9.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Code Point 0. Read-only to maintain backward compatibility with IPv4 header's TOS byte. | |||||||||||||
| ScodePoint1 | 1.3.6.1.4.1.161.19.3.3.9.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 1. | |||||||||||||
| ScodePoint2 | 1.3.6.1.4.1.161.19.3.3.9.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 2. | |||||||||||||
| ScodePoint3 | 1.3.6.1.4.1.161.19.3.3.9.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 3. | |||||||||||||
| ScodePoint4 | 1.3.6.1.4.1.161.19.3.3.9.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 4. | |||||||||||||
| ScodePoint5 | 1.3.6.1.4.1.161.19.3.3.9.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 5. | |||||||||||||
| ScodePoint6 | 1.3.6.1.4.1.161.19.3.3.9.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 6. | |||||||||||||
| ScodePoint7 | 1.3.6.1.4.1.161.19.3.3.9.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 7. | |||||||||||||
| ScodePoint8 | 1.3.6.1.4.1.161.19.3.3.9.9 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Code Point 8. Read-only to maintain backward compatibility with IPv4 header's TOS byte. | |||||||||||||
| ScodePoint9 | 1.3.6.1.4.1.161.19.3.3.9.10 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 9. | |||||||||||||
| ScodePoint10 | 1.3.6.1.4.1.161.19.3.3.9.11 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 10. | |||||||||||||
| ScodePoint11 | 1.3.6.1.4.1.161.19.3.3.9.12 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 11. | |||||||||||||
| ScodePoint12 | 1.3.6.1.4.1.161.19.3.3.9.13 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 12. | |||||||||||||
| ScodePoint13 | 1.3.6.1.4.1.161.19.3.3.9.14 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 13. | |||||||||||||
| ScodePoint14 | 1.3.6.1.4.1.161.19.3.3.9.15 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 14. | |||||||||||||
| ScodePoint15 | 1.3.6.1.4.1.161.19.3.3.9.16 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 15. | |||||||||||||
| ScodePoint16 | 1.3.6.1.4.1.161.19.3.3.9.17 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Code Point 16. Read-only to maintain backward compatibility with IPv4 header's TOS byte. | |||||||||||||
| ScodePoint17 | 1.3.6.1.4.1.161.19.3.3.9.18 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 17. | |||||||||||||
| ScodePoint18 | 1.3.6.1.4.1.161.19.3.3.9.19 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 18. | |||||||||||||
| ScodePoint19 | 1.3.6.1.4.1.161.19.3.3.9.20 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 19. | |||||||||||||
| ScodePoint20 | 1.3.6.1.4.1.161.19.3.3.9.21 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 20. | |||||||||||||
| ScodePoint21 | 1.3.6.1.4.1.161.19.3.3.9.22 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 21. | |||||||||||||
| ScodePoint22 | 1.3.6.1.4.1.161.19.3.3.9.23 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 22. | |||||||||||||
| ScodePoint23 | 1.3.6.1.4.1.161.19.3.3.9.24 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 23. | |||||||||||||
| ScodePoint24 | 1.3.6.1.4.1.161.19.3.3.9.25 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Code Point 24. Read-only to maintain backward compatibility with IPv4 header's TOS byte. | |||||||||||||
| ScodePoint25 | 1.3.6.1.4.1.161.19.3.3.9.26 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 25. | |||||||||||||
| ScodePoint26 | 1.3.6.1.4.1.161.19.3.3.9.27 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 26. | |||||||||||||
| ScodePoint27 | 1.3.6.1.4.1.161.19.3.3.9.28 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 27. | |||||||||||||
| ScodePoint28 | 1.3.6.1.4.1.161.19.3.3.9.29 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 28. | |||||||||||||
| ScodePoint29 | 1.3.6.1.4.1.161.19.3.3.9.30 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 29. | |||||||||||||
| ScodePoint30 | 1.3.6.1.4.1.161.19.3.3.9.31 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 30. | |||||||||||||
| ScodePoint31 | 1.3.6.1.4.1.161.19.3.3.9.32 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 31. | |||||||||||||
| ScodePoint32 | 1.3.6.1.4.1.161.19.3.3.9.33 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Code Point 32. Read-only to maintain backward compatibility with IPv4 header's TOS byte. | |||||||||||||
| ScodePoint33 | 1.3.6.1.4.1.161.19.3.3.9.34 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 33. | |||||||||||||
| ScodePoint34 | 1.3.6.1.4.1.161.19.3.3.9.35 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 34. | |||||||||||||
| ScodePoint35 | 1.3.6.1.4.1.161.19.3.3.9.36 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 35. | |||||||||||||
| ScodePoint36 | 1.3.6.1.4.1.161.19.3.3.9.37 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 36. | |||||||||||||
| ScodePoint37 | 1.3.6.1.4.1.161.19.3.3.9.38 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 37. | |||||||||||||
| ScodePoint38 | 1.3.6.1.4.1.161.19.3.3.9.39 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 38. | |||||||||||||
| ScodePoint39 | 1.3.6.1.4.1.161.19.3.3.9.40 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 39. | |||||||||||||
| ScodePoint40 | 1.3.6.1.4.1.161.19.3.3.9.41 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Code Point 40. Read-only to maintain backward compatibility with IPv4 header's TOS byte. | |||||||||||||
| ScodePoint41 | 1.3.6.1.4.1.161.19.3.3.9.42 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 41. | |||||||||||||
| ScodePoint42 | 1.3.6.1.4.1.161.19.3.3.9.43 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 42. | |||||||||||||
| ScodePoint43 | 1.3.6.1.4.1.161.19.3.3.9.44 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 43. | |||||||||||||
| ScodePoint44 | 1.3.6.1.4.1.161.19.3.3.9.45 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 44. | |||||||||||||
| ScodePoint45 | 1.3.6.1.4.1.161.19.3.3.9.46 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 45. | |||||||||||||
| ScodePoint46 | 1.3.6.1.4.1.161.19.3.3.9.47 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 46. | |||||||||||||
| ScodePoint47 | 1.3.6.1.4.1.161.19.3.3.9.48 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 47. | |||||||||||||
| ScodePoint48 | 1.3.6.1.4.1.161.19.3.3.9.49 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Code Point 48. Read-only to maintain backward compatibility with IPv4 header's TOS byte. | |||||||||||||
| ScodePoint49 | 1.3.6.1.4.1.161.19.3.3.9.50 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 49. | |||||||||||||
| ScodePoint50 | 1.3.6.1.4.1.161.19.3.3.9.51 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 50. | |||||||||||||
| ScodePoint51 | 1.3.6.1.4.1.161.19.3.3.9.52 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 51. | |||||||||||||
| ScodePoint52 | 1.3.6.1.4.1.161.19.3.3.9.53 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 52. | |||||||||||||
| ScodePoint53 | 1.3.6.1.4.1.161.19.3.3.9.54 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 53. | |||||||||||||
| ScodePoint54 | 1.3.6.1.4.1.161.19.3.3.9.55 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 54. | |||||||||||||
| ScodePoint55 | 1.3.6.1.4.1.161.19.3.3.9.56 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 55. | |||||||||||||
| ScodePoint56 | 1.3.6.1.4.1.161.19.3.3.9.57 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Code Point 56. Read-only to maintain backward compatibility with IPv4 header's TOS byte. | |||||||||||||
| ScodePoint57 | 1.3.6.1.4.1.161.19.3.3.9.58 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 57. | |||||||||||||
| ScodePoint58 | 1.3.6.1.4.1.161.19.3.3.9.59 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 58. | |||||||||||||
| ScodePoint59 | 1.3.6.1.4.1.161.19.3.3.9.60 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 59. | |||||||||||||
| ScodePoint60 | 1.3.6.1.4.1.161.19.3.3.9.61 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 60. | |||||||||||||
| ScodePoint61 | 1.3.6.1.4.1.161.19.3.3.9.62 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 61. | |||||||||||||
| ScodePoint62 | 1.3.6.1.4.1.161.19.3.3.9.63 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 62. | |||||||||||||
| ScodePoint63 | 1.3.6.1.4.1.161.19.3.3.9.64 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Code Point 63. | |||||||||||||
| TwhispUserTable | 1.3.6.1.4.1.161.19.3.3.10 | NA | |||||||||||
table · not-accessible · current User information table. | |||||||||||||
| RwhispUserEntry | 1.3.6.1.4.1.161.19.3.3.10.1 | NA | |||||||||||
| CentryIndex | 1.3.6.1.4.1.161.19.3.3.10.1.1 | INTEGER (1..5) | RO | ||||||||||
column · INTEGER (1..5) · read-only · current User information table index. | |||||||||||||
| CuserLoginName | 1.3.6.1.4.1.161.19.3.3.10.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current User name. | |||||||||||||
| CuserPswd | 1.3.6.1.4.1.161.19.3.3.10.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current User password. | |||||||||||||
| CaccessLevel | 1.3.6.1.4.1.161.19.3.3.10.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current User access level. | |||||||||||||
| CloginStatus | 1.3.6.1.4.1.161.19.3.3.10.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current User current status. | |||||||||||||
| CloginMethod | 1.3.6.1.4.1.161.19.3.3.10.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current User login method. | |||||||||||||
| CsessionTime | 1.3.6.1.4.1.161.19.3.3.10.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Users logged in session time. | |||||||||||||
| TwhispLayer2NeighborTable | 1.3.6.1.4.1.161.19.3.3.11 | NA | |||||||||||
table · not-accessible · current Neighbor information table. | |||||||||||||
| RwhispLayer2NeighborEntry | 1.3.6.1.4.1.161.19.3.3.11.1 | NA | |||||||||||
| CentryL2Index | 1.3.6.1.4.1.161.19.3.3.11.1.1 | INTEGER (1..20) | RO | ||||||||||
column · INTEGER (1..20) · read-only · current Neighbor information table index. | |||||||||||||
| CneighborMAC | 1.3.6.1.4.1.161.19.3.3.11.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Neighbor MAC. | |||||||||||||
| CneighborIP | 1.3.6.1.4.1.161.19.3.3.11.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Neighbor IP. | |||||||||||||
| CneighborSiteName | 1.3.6.1.4.1.161.19.3.3.11.1.4 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Neighbor Site Name. | |||||||||||||
| NwhispBoxEvent | 1.3.6.1.4.1.161.19.3.3.12 | ||||||||||||
| NwhispBoxDHCPClientEvent | 1.3.6.1.4.1.161.19.3.3.12.1 | ||||||||||||
| !boxLan1DHCPClientEvent | 1.3.6.1.4.1.161.19.3.3.12.1.1 | ||||||||||||
notification · current Lan1 DHCP Client has received a new address via DHCP
| |||||||||||||
| NwhispBoxPoEEvent | 1.3.6.1.4.1.161.19.3.3.12.2 | ||||||||||||
| !boxPoEType2PowerNotPresent | 1.3.6.1.4.1.161.19.3.3.12.2.1 | ||||||||||||
notification · current 802.3at Type 2 PoE not present, transmit and PoE out disabled
| |||||||||||||
| NwhispBoxRadioAlarmEvent | 1.3.6.1.4.1.161.19.3.3.12.3 | ||||||||||||
| !radioStatusAlarmEvent | 1.3.6.1.4.1.161.19.3.3.12.3.1 | ||||||||||||
| NwhispBoxMinModRateEvent | 1.3.6.1.4.1.161.19.3.3.12.4 | ||||||||||||
| !minModRateEvent | 1.3.6.1.4.1.161.19.3.3.12.4.1 | ||||||||||||
notification · current Minimum Modulation Rate Event Notification. Value indicates whether or not minimum modulation rate requirement has been satisfied. PTP only.
| |||||||||||||
| NwhispBoxDNS | 1.3.6.1.4.1.161.19.3.3.13 | ||||||||||||
| SdnsIpState | 1.3.6.1.4.1.161.19.3.3.13.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configuration for DNS server IP addresses of the management interface are learned: 0 : Manual, must configure dnsPrimaryMgmtIP and dnsAlternateMgmtIP 1 : Automatic, DNS servers IP addresses are learned from DHCP response of the interface
| |||||||||||||
| SdnsPrimaryMgmtIP | 1.3.6.1.4.1.161.19.3.3.13.2 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Primary DNS IP address for the management interface. | |||||||||||||
| SdnsAlternateMgmtIP | 1.3.6.1.4.1.161.19.3.3.13.3 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Secondary DNS IP address for the management interface. | |||||||||||||
| SdnsMgmtDomainName | 1.3.6.1.4.1.161.19.3.3.13.4 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Domain Name to use for management DNS configuration. This domain name may be concatonated to DNS names used configured for the management interface. | |||||||||||||
| StrapDomainNameAppend | 1.3.6.1.4.1.161.19.3.3.13.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Select whether to append the configured management domain name to the configured trap names. For example, if dnsMgmtDomainName is set to 'example.com', trap1 is set to 'trap1', and trapDomainNameAppend is set to appendDomain, the trap1 name used would be 'trap1.example.com'.
| |||||||||||||
| Strap1 | 1.3.6.1.4.1.161.19.3.3.13.6 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Trap IP Address 1. Format is either an IP address or DNS name. | |||||||||||||
| Strap2 | 1.3.6.1.4.1.161.19.3.3.13.7 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Trap IP Address 2. Format is either an IP address or DNS name. | |||||||||||||
| Strap3 | 1.3.6.1.4.1.161.19.3.3.13.8 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Trap IP Address 3. Format is either an IP address or DNS name. | |||||||||||||
| Strap4 | 1.3.6.1.4.1.161.19.3.3.13.9 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Trap IP Address 4. Format is either an IP address or DNS name. | |||||||||||||
| Strap5 | 1.3.6.1.4.1.161.19.3.3.13.10 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Trap IP Address 5. Format is either an IP address or DNS name. | |||||||||||||
| Strap6 | 1.3.6.1.4.1.161.19.3.3.13.11 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Trap IP Address 6. Format is either an IP address or DNS name. | |||||||||||||
| Strap7 | 1.3.6.1.4.1.161.19.3.3.13.12 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Trap IP Address 7. Format is either an IP address or DNS name. | |||||||||||||
| Strap8 | 1.3.6.1.4.1.161.19.3.3.13.13 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Trap IP Address 8. Format is either an IP address or DNS name. | |||||||||||||
| Strap9 | 1.3.6.1.4.1.161.19.3.3.13.14 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Trap IP Address 9. Format is either an IP address or DNS name. | |||||||||||||
| Strap10 | 1.3.6.1.4.1.161.19.3.3.13.15 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Trap IP Address 10. Format is either an IP address or DNS name. | |||||||||||||
| NwhispBoxSNMPv3 | 1.3.6.1.4.1.161.19.3.3.14 | ||||||||||||
| Ssnmpv2cEnable | 1.3.6.1.4.1.161.19.3.3.14.1 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated This variable is deprecated, please use snmpStatus.
| |||||||||||||
| Ssnmpv3EngineId | 1.3.6.1.4.1.161.19.3.3.14.2 | OCTET STRING (SIZE (10..64)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (10..64)) · read-write · current The SNMPv3 engine administratively-unique identifier. Length of the identifier should be 5-32 octets which is 10-64 hexadecimal characters and even. | |||||||||||||
| Ssnmpv3SecLvl | 1.3.6.1.4.1.161.19.3.3.14.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The security level of the SNMPv3 Engine.
| |||||||||||||
| Ssnmpv3AuthProt | 1.3.6.1.4.1.161.19.3.3.14.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The SNMPv3 message authentication protocol to use. Currently MD5, SHA1 and SHA256 are supported.
| |||||||||||||
| Ssnmpv3PrivProt | 1.3.6.1.4.1.161.19.3.3.14.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The SNMPv3 message privacy/encryption protocol to use. Currently CBC-DES and CFB-AES are supported.
| |||||||||||||
| SroUserName | 1.3.6.1.4.1.161.19.3.3.14.6 | OCTET STRING (SIZE (1..32)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (1..32)) · read-write · current SNMPv3 Read-Only username. | |||||||||||||
| SroAuthPassword | 1.3.6.1.4.1.161.19.3.3.14.7 | OCTET STRING (SIZE (1..32)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (1..32)) · read-write · current SNMPv3 Read-Only message authentication password.Minimum 8 and maximum 32 characters long. | |||||||||||||
| SroPrivPassword | 1.3.6.1.4.1.161.19.3.3.14.8 | OCTET STRING (SIZE (1..32)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (1..32)) · read-write · current SNMPv3 Read-Only message privacy/encryption password.Minimum 8 and maximum 32 characters long. | |||||||||||||
| SrwUserEnable | 1.3.6.1.4.1.161.19.3.3.14.9 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current SNMPv3 Read-Write User Enable.
| |||||||||||||
| SrwUserName | 1.3.6.1.4.1.161.19.3.3.14.10 | OCTET STRING (SIZE (1..32)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (1..32)) · read-write · current SNMPv3 Read-Write Username. | |||||||||||||
| SrwAuthPassword | 1.3.6.1.4.1.161.19.3.3.14.11 | OCTET STRING (SIZE (1..32)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (1..32)) · read-write · current SNMPv3 Read-Write message authentication password.Minimum 8 and maximum 32 characters long. | |||||||||||||
| SrwPrivPassword | 1.3.6.1.4.1.161.19.3.3.14.12 | OCTET STRING (SIZE (1..32)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (1..32)) · read-write · current SNMPv3 Read-Write message privacy/encryption password.Minimum 8 and maximum 32 characters long. | |||||||||||||
| Ssnmpv3TrapEnable | 1.3.6.1.4.1.161.19.3.3.14.13 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current SNMPv3 Trap enable option: (0) Disable - No SNMPv3 Traps Sent (1) Enable Traps to be sent for SNMPv3 Read-Only User (2) Enable Traps to be sent for SNMPv3 Read-Write User NOTE: When disabled SNMPv2c Trap configuration is used.
| |||||||||||||
| Suser1Enable | 1.3.6.1.4.1.161.19.3.3.14.14 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current SNMPv3 Additional User1 Enable.
| |||||||||||||
| SuserName1 | 1.3.6.1.4.1.161.19.3.3.14.15 | OCTET STRING (SIZE (1..32)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (1..32)) · read-write · current Additional SNMPv3 Username1. | |||||||||||||
| Suser1AuthPassword | 1.3.6.1.4.1.161.19.3.3.14.16 | OCTET STRING (SIZE (1..32)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (1..32)) · read-write · current SNMPv3 Read-Write message authentication password.Minimum 8 and maximum 32 characters long. | |||||||||||||
| Suser1PrivPassword | 1.3.6.1.4.1.161.19.3.3.14.17 | OCTET STRING (SIZE (1..32)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (1..32)) · read-write · current SNMPv3 Read-Write message privacy/encryption password.Minimum 8 and maximum 32 characters long. | |||||||||||||
| SuserGroup1 | 1.3.6.1.4.1.161.19.3.3.14.18 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current SNMPv3 User1 Group (ReadWrite/ReadOnly).
| |||||||||||||
| SuserName2 | 1.3.6.1.4.1.161.19.3.3.14.19 | OCTET STRING (SIZE (1..32)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (1..32)) · read-write · current Additional SNMPv3 Username2. | |||||||||||||
| Suser2Enable | 1.3.6.1.4.1.161.19.3.3.14.20 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current SNMPv3 Additional User2 Enable.
| |||||||||||||
| Suser2AuthPassword | 1.3.6.1.4.1.161.19.3.3.14.21 | OCTET STRING (SIZE (1..32)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (1..32)) · read-write · current SNMPv3 Read-Write message authentication password.Minimum 8 and maximum 32 characters long. | |||||||||||||
| Suser2PrivPassword | 1.3.6.1.4.1.161.19.3.3.14.22 | OCTET STRING (SIZE (1..32)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (1..32)) · read-write · current SNMPv3 Read-Write message privacy/encryption password.Minimum 8 and maximum 32 characters long. | |||||||||||||
| Suser2Group | 1.3.6.1.4.1.161.19.3.3.14.23 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current SNMPv3 User1 Group (ReadWrite/ReadOnly).
| |||||||||||||
| SuserName3 | 1.3.6.1.4.1.161.19.3.3.14.24 | OCTET STRING (SIZE (1..32)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (1..32)) · read-write · current Additional SNMPv3 Username1. | |||||||||||||
| Suser3Enable | 1.3.6.1.4.1.161.19.3.3.14.25 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current SNMPv3 Additional User3 Enable.
| |||||||||||||
| Suser3AuthPassword | 1.3.6.1.4.1.161.19.3.3.14.26 | OCTET STRING (SIZE (1..32)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (1..32)) · read-write · current SNMPv3 Read-Write message authentication password.Minimum 8 and maximum 32 characters long. | |||||||||||||
| Suser3PrivPassword | 1.3.6.1.4.1.161.19.3.3.14.27 | OCTET STRING (SIZE (1..32)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (1..32)) · read-write · current SNMPv3 Read-Write message privacy/encryption password.Minimum 8 and maximum 32 characters long. | |||||||||||||
| Suser3Group | 1.3.6.1.4.1.161.19.3.3.14.28 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current SNMPv3 User3 Group (ReadWrite/ReadOnly).
| |||||||||||||
| NwhispBoxRFPhysical | 1.3.6.1.4.1.161.19.3.3.15 | ||||||||||||
| TwhispBoxRFPhysicalRadios | 1.3.6.1.4.1.161.19.3.3.15.1 | NA | |||||||||||
table · not-accessible · current Radio information table. | |||||||||||||
| RwhispBoxRFPhysicalRadioEntry | 1.3.6.1.4.1.161.19.3.3.15.1.1 | NA | |||||||||||
| CradioIndex | 1.3.6.1.4.1.161.19.3.3.15.1.1.1 | INTEGER (0..256) | RO | ||||||||||
column · INTEGER (0..256) · read-only · current Radio Index. | |||||||||||||
| CradioType | 1.3.6.1.4.1.161.19.3.3.15.1.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates if the radio is FSK or OFDM.
| |||||||||||||
| CradioPaths | 1.3.6.1.4.1.161.19.3.3.15.1.1.3 | INTEGER (0..256) | RO | ||||||||||
column · INTEGER (0..256) · read-only · current Indicates number of paths. For FSK or OFDM (non-MIMO), this is 1. For MIMO, it can be greater (with a current maximum of 2). | |||||||||||||
| TwhispBoxRFPhysicalRadioPaths | 1.3.6.1.4.1.161.19.3.3.15.2 | NA | |||||||||||
table · not-accessible · current Radio path information table. | |||||||||||||
| RwhispBoxRFPhysicalRadioPathEntry | 1.3.6.1.4.1.161.19.3.3.15.2.1 | NA | |||||||||||
| CpathIndex | 1.3.6.1.4.1.161.19.3.3.15.2.1.1 | INTEGER (0..256) | RO | ||||||||||
column · INTEGER (0..256) · read-only · current Path Index. | |||||||||||||
| TwhispBoxRFPhysicalRadioFrequencies | 1.3.6.1.4.1.161.19.3.3.15.3 | NA | |||||||||||
table · not-accessible · current Available frequency information table. | |||||||||||||
| RwhispBoxRFPhysicalRadioFrequencyEntry | 1.3.6.1.4.1.161.19.3.3.15.3.1 | NA | |||||||||||
| Cfrequency | 1.3.6.1.4.1.161.19.3.3.15.3.1.1 | INTEGER (0..9000000) | RO | ||||||||||
column · INTEGER (0..9000000) · read-only · current Frequency. | |||||||||||||
| NwhispBoxRFConfig | 1.3.6.1.4.1.161.19.3.3.16 | ||||||||||||
| TwhispBoxRFConfigRadios | 1.3.6.1.4.1.161.19.3.3.16.1 | NA | |||||||||||
table · not-accessible · current Radio configuration table. | |||||||||||||
| RwhispBoxRFConfigRadioEntry | 1.3.6.1.4.1.161.19.3.3.16.1.1 | NA | |||||||||||
| CradioConfigIndex | 1.3.6.1.4.1.161.19.3.3.16.1.1.1 | INTEGER (0..256) | RO | ||||||||||
column · INTEGER (0..256) · read-only · current Radio Config Index. | |||||||||||||
| CradioFrequencyBand | 1.3.6.1.4.1.161.19.3.3.16.1.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Currently configured radio band. Set is Engineering use only.
| |||||||||||||
| TcarrierConfig | 1.3.6.1.4.1.161.19.3.3.16.2 | NA | |||||||||||
table · not-accessible · current Canopy V carrier configuration table | |||||||||||||
| RcarrierConfigEntry | 1.3.6.1.4.1.161.19.3.3.16.2.1 | NA | |||||||||||
| CcarrierTableIndex | 1.3.6.1.4.1.161.19.3.3.16.2.1.1 | INTEGER (1..2) | RO | ||||||||||
column · INTEGER (1..2) · read-only · current Index to the Canopy V carrier config table | |||||||||||||
| CcarrierBand | 1.3.6.1.4.1.161.19.3.3.16.2.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Currently configured radio band
| |||||||||||||
| CcarrierTxPower | 1.3.6.1.4.1.161.19.3.3.16.2.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Transmit power for the carrier in dBm | |||||||||||||
| CcarrierRxPowerTarget | 1.3.6.1.4.1.161.19.3.3.16.2.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Desired receive power level in dBm. For point to point links bhsTxPowerControl must be enabled on the BHM for this level to be targetted. | |||||||||||||
| TcomponentCarrierConfig | 1.3.6.1.4.1.161.19.3.3.16.3 | NA | |||||||||||
table · not-accessible · current Canopy V component carrier configuration table | |||||||||||||
| RcomponentCarrierConfigEntry | 1.3.6.1.4.1.161.19.3.3.16.3.1 | NA | |||||||||||
row · not-accessible · current Canopy V component carrier configuration table entry | |||||||||||||
| CcomponentCarrierTableIndex | 1.3.6.1.4.1.161.19.3.3.16.3.1.1 | INTEGER (1..4) | RO | ||||||||||
column · INTEGER (1..4) · read-only · current Index to the Canopy V component carrier config table | |||||||||||||
| CcomponentCarrierAssignment | 1.3.6.1.4.1.161.19.3.3.16.3.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The carrier assignment of the component carrier. Assign the component carrier to a carrier before setting the component carrier frequency. Canopy V only. SM read only. | |||||||||||||
| CcomponentCarrierFrequency | 1.3.6.1.4.1.161.19.3.3.16.3.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The frequency of component carrier in kHz. Canopy V only. SM read only. | |||||||||||||
| ScarrierCount | 1.3.6.1.4.1.161.19.3.3.16.4 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current A count of the enabled carriers. Read only. Canopy V only. | |||||||||||||
| ScomponentCarrierCount | 1.3.6.1.4.1.161.19.3.3.16.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Count of active component carriers. Read only. Canopy V only. | |||||||||||||
| TwhispVLANRemarkTable | 1.3.6.1.4.1.161.19.3.3.17 | NA | |||||||||||
table · not-accessible · current Active VLAN Remarking table. | |||||||||||||
| RwhispVLANRemarkEntry | 1.3.6.1.4.1.161.19.3.3.17.1 | NA | |||||||||||
| CsourceVID | 1.3.6.1.4.1.161.19.3.3.17.1.1 | INTEGER (1..4094) | RO | ||||||||||
column · INTEGER (1..4094) · read-only · current Source VLAN ID. | |||||||||||||
| CremarkVIDState | 1.3.6.1.4.1.161.19.3.3.17.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Remark VID State. | |||||||||||||
| CremarkVID | 1.3.6.1.4.1.161.19.3.3.17.1.3 | INTEGER (0..4094) | RO | ||||||||||
column · INTEGER (0..4094) · read-only · current Remark VID. | |||||||||||||
| CremarkPriorityState | 1.3.6.1.4.1.161.19.3.3.17.1.4 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Remark Priority State. | |||||||||||||
| CremarkPriority | 1.3.6.1.4.1.161.19.3.3.17.1.5 | INTEGER (0..7) | RO | ||||||||||
column · INTEGER (0..7) · read-only · current Remark Priority. | |||||||||||||
| NwhispBoxLink | 1.3.6.1.4.1.161.19.3.3.18 | ||||||||||||
| NwhispBoxLinkTestConfig | 1.3.6.1.4.1.161.19.3.3.18.1 | ||||||||||||
| SlinkTestLUIDBox | 1.3.6.1.4.1.161.19.3.3.18.1.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current LUID selection for Link Test. Valid range: 2-255. Read-Only for SM or Backhaul slave, Read/Write for AP. | |||||||||||||
| SlinkTestDurationBox | 1.3.6.1.4.1.161.19.3.3.18.1.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Duration for the Link Test. Valid range: 2-10 seconds | |||||||||||||
| SlinkTestActionBox | 1.3.6.1.4.1.161.19.3.3.18.1.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting value 1 will initiate link test. Note that trying to set 0 will not stop the test. In fact it will return an error message. The value of 0 just indicates the idle state meaning no test is running or the current test is done. That's why the word stopped is used and not the action verb stop.
| |||||||||||||
| SlinkTestPktLengthBox | 1.3.6.1.4.1.161.19.3.3.18.1.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Packet length for Link Test. Valid range: 64-1714 bytes | |||||||||||||
| SlinkTestModeBox | 1.3.6.1.4.1.161.19.3.3.18.1.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Link Test Mode 0 = Link Test without Bridging 1 = Link Test with Bridging 2 = Link Test with Bridging and MIR 3 = Extrapolated Link Test (send only a few packets measuring their quality and extrapolate out the throughput) This is an estimation of the throughput based upon the modulation, efficiency, and data slots available. It intended to provide a basic link test test without impacting service for the sector. Extrapolated Link Test is not available for FSK radios. 4 = Link Test with Multiple LUIDs (traffic sent to all registered LUIDs, or specified LUIDs) - PMP 450m only Note: Link Test must NOT be running when attempting to set this or an SNMP error will occur.
| |||||||||||||
| SlinkTestSNRCalculationBox | 1.3.6.1.4.1.161.19.3.3.18.1.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable or disable Signal to Noise Ratio (SNR) calculations during a Link Test. Enabling(1) will calulate SNR on all receiving packets. Due to load on CPU, will slightly degrade packet per second capabilities. Only applicable to GenII OFDM products and up.
| |||||||||||||
| SlinkTestWithDualPathBox | 1.3.6.1.4.1.161.19.3.3.18.1.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Link Test with: 0 = Low Priority Data Channel only 1 = All Available Data Channels
| |||||||||||||
| SlinkTestNumPktBox | 1.3.6.1.4.1.161.19.3.3.18.1.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Number of packets to send. Valid range: 0-64 where 0 will flood the link for the duration of the test. | |||||||||||||
| SlinkTestForceModulationBox | 1.3.6.1.4.1.161.19.3.3.18.1.9 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Engineering use only. Link Test with: 0 = Normal Rate Adapt algorithm 1 = Force to max modultion - No Rate Adapt Algorithm
| |||||||||||||
| SlinkTestDirectionBox | 1.3.6.1.4.1.161.19.3.3.18.1.10 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Link Test Direction - Engineering Use Only 0 = default (will do bidirectional) 1 = Uplink Only 2 = Downlink Only 3 = Bi-Directional (same as 0, setting to 3 will result in setting it to 0)
| |||||||||||||
| SlinkTestFloodModeBox | 1.3.6.1.4.1.161.19.3.3.18.1.11 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated This OID has been deprecated.
| |||||||||||||
| SlinkTestMumimoBox | 1.3.6.1.4.1.161.19.3.3.18.1.12 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current PMP 450m only. Link Test usage: 0 = MU-MIMO disabled (legacy or sector mode) 1 = MU-MIMO enabled
| |||||||||||||
| SlinkTestVCListBox | 1.3.6.1.4.1.161.19.3.3.18.1.13 | DisplayString | RW | obsolete | |||||||||
scalar · DisplayString · read-write · obsolete This OID is now obsolete. Please use linkTestLUIDListBox instead. | |||||||||||||
| SlinkTestSMRestriction | 1.3.6.1.4.1.161.19.3.3.18.1.14 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Control access to SM initiated Link Tests. Disabling will permit all Link Tests initiated at the SM. Enabling will only permit Link Tests that allow user traffic to pass. PMP only.
| |||||||||||||
| SlinkTestPriorityLevelBox | 1.3.6.1.4.1.161.19.3.3.18.1.15 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current PMP 450m only. Link Test with: 0 = Link Test Low Priority Data Channels 1 = Link Test Low and Medium Priority Data Channels 2 = Link Test Low, Medium and High Priority Data Channels 3 = Link Test All Data Channels
| |||||||||||||
| SlinkTestDisplayUntestedPriorityChannelsBox | 1.3.6.1.4.1.161.19.3.3.18.1.16 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated This OID has been deprecated. All untested Data Channels with traffic are now marked as such by the 'Tested' column and always displayed.
| |||||||||||||
| SlinkTestIgnoreCIRBox | 1.3.6.1.4.1.161.19.3.3.18.1.17 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current PMP 450m only. Ignore configured CIR when performing Link Test with Multiple LUIDs 0 - Use CIR 1 - Ignore CIR
| |||||||||||||
| SlinkTestLUIDListBox | 1.3.6.1.4.1.161.19.3.3.18.1.18 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current PMP 450m only. Link Test usage: Enter LUIDs to be tested (eg. 2 - 22,24,32) Empty field or 0 will flood all registered LUIDs for duration of test Note: Link Test must NOT be running when attempting to set this or an SNMP error will occur. | |||||||||||||
| SlinkTestBlockUserTrafficBox | 1.3.6.1.4.1.161.19.3.3.18.1.19 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current PMP 450m only. Choose whether or not to block user traffic during a Link Test With Mulitple LUIDs. When blocking is enabled, only link test packets will be allowed to get through for the duration of the test. When blocking is disbaled, user data is allowed through, and link test fills any remaining slots. 0 = Allow User Traffic (default) 1 = Block User Traffic
| |||||||||||||
| SlinkTestRAProgCntOverrideBox | 1.3.6.1.4.1.161.19.3.3.18.1.20 | INTEGER (0..2047) | RW | ||||||||||
scalar · INTEGER (0..2047) · read-write · current Engineering use only. Override value for rate adapt progressive count (if being applied): range 0 - 2047 | |||||||||||||
| NwhispBoxLinkTestResult | 1.3.6.1.4.1.161.19.3.3.18.2 | ||||||||||||
| StestLUIDBox | 1.3.6.1.4.1.161.19.3.3.18.2.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current LUID number of selected unit. | |||||||||||||
| SlinkTestStatusBox | 1.3.6.1.4.1.161.19.3.3.18.2.2 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Status for Link Test. | |||||||||||||
| SlinkTestErrorBox | 1.3.6.1.4.1.161.19.3.3.18.2.3 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Error status of Link Test: (1) Failed to recieve handshake from remote device (2) No session with selected LUID. Please try again after session established. (3) Received a bad transaction ID. Please try again. (4) We werent able to send the test request to the remote device. (5) We didnt receive any results from the remote device. | |||||||||||||
| StestDurationBox | 1.3.6.1.4.1.161.19.3.3.18.2.4 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Duration of link test. | |||||||||||||
| SdownLinkRateBox | 1.3.6.1.4.1.161.19.3.3.18.2.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Downlink Rate.
| |||||||||||||
| SupLinkRateBox | 1.3.6.1.4.1.161.19.3.3.18.2.6 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Uplink Rate.
| |||||||||||||
| SdownLinkEffBox | 1.3.6.1.4.1.161.19.3.3.18.2.7 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Downlink Efficiency.
| |||||||||||||
| SmaxDwnLinkIndexBox | 1.3.6.1.4.1.161.19.3.3.18.2.8 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current For link test results, the maximum possible downlink efficiency percentage (always 100%). | |||||||||||||
| SactDwnLinkIndexBox | 1.3.6.1.4.1.161.19.3.3.18.2.9 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Actual downlink index. | |||||||||||||
| SexpDwnFragCountBox | 1.3.6.1.4.1.161.19.3.3.18.2.10 | Gauge32 | RO | ||||||||||
scalar · Gauge32 · read-only · current Expected Fragment Count. | |||||||||||||
| SactDwnFragCountBox | 1.3.6.1.4.1.161.19.3.3.18.2.11 | Gauge32 | RO | ||||||||||
scalar · Gauge32 · read-only · current Actual Fragment Count | |||||||||||||
| SupLinkEffBox | 1.3.6.1.4.1.161.19.3.3.18.2.12 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Uplink efficiency.
| |||||||||||||
| SexpUpFragCountBox | 1.3.6.1.4.1.161.19.3.3.18.2.13 | Gauge32 | RO | ||||||||||
scalar · Gauge32 · read-only · current Uplink expected Fragment Count. | |||||||||||||
| SactUpFragCountBox | 1.3.6.1.4.1.161.19.3.3.18.2.14 | Gauge32 | RO | ||||||||||
scalar · Gauge32 · read-only · current Actual uplink Fragment Count. | |||||||||||||
| SmaxUpLinkIndexBox | 1.3.6.1.4.1.161.19.3.3.18.2.15 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current For link test results, the maximum possible uplink efficiency percentage (always 100%). | |||||||||||||
| SactUpLinkIndexBox | 1.3.6.1.4.1.161.19.3.3.18.2.16 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Actual Uplink index. | |||||||||||||
| Sfragments1xDwnLinkVerticalBox | 1.3.6.1.4.1.161.19.3.3.18.2.17 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of fragments received on downlink at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path. | |||||||||||||
| Sfragments2xDwnLinkVerticalBox | 1.3.6.1.4.1.161.19.3.3.18.2.18 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of fragments received on downlink at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. | |||||||||||||
| Sfragments3xDwnLinkVerticalBox | 1.3.6.1.4.1.161.19.3.3.18.2.19 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of fragments received on downlink at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. | |||||||||||||
| Sfragments4xDwnLinkVerticalBox | 1.3.6.1.4.1.161.19.3.3.18.2.20 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of fragments received on downlink at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. | |||||||||||||
| Sfragments1xUpLinkVerticalBox | 1.3.6.1.4.1.161.19.3.3.18.2.21 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of fragments received on uplink at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path. | |||||||||||||
| Sfragments2xUpLinkVerticalBox | 1.3.6.1.4.1.161.19.3.3.18.2.22 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of fragments received on uplink at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. | |||||||||||||
| Sfragments3xUpLinkVerticalBox | 1.3.6.1.4.1.161.19.3.3.18.2.23 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of fragments received on uplink at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. | |||||||||||||
| Sfragments4xUpLinkVerticalBox | 1.3.6.1.4.1.161.19.3.3.18.2.24 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of fragments received on uplink at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. | |||||||||||||
| SbitErrorsCorrected1xDwnLinkVerticalBox | 1.3.6.1.4.1.161.19.3.3.18.2.25 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Number of bit errors corrected on average per fragment on downlink at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path. | |||||||||||||
| SbitErrorsCorrected2xDwnLinkVerticalBox | 1.3.6.1.4.1.161.19.3.3.18.2.26 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Number of bit errors corrected on average per fragment on downlink at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. | |||||||||||||
| SbitErrorsCorrected3xDwnLinkVerticalBox | 1.3.6.1.4.1.161.19.3.3.18.2.27 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Number of bit errors corrected on average per fragment on downlink at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. | |||||||||||||
| SbitErrorsCorrected4xDwnLinkVerticalBox | 1.3.6.1.4.1.161.19.3.3.18.2.28 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Number of bit errors corrected on average per fragment on downlink at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. | |||||||||||||
| SbitErrorsCorrected1xUpLinkVerticalBox | 1.3.6.1.4.1.161.19.3.3.18.2.29 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Number of bit errors corrected on average per fragment on uplink at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path. | |||||||||||||
| SbitErrorsCorrected2xUpLinkVerticalBox | 1.3.6.1.4.1.161.19.3.3.18.2.30 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Number of bit errors corrected on average per fragment on uplink at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. | |||||||||||||
| SbitErrorsCorrected3xUpLinkVerticalBox | 1.3.6.1.4.1.161.19.3.3.18.2.31 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Number of bit errors corrected on average per fragment on uplink at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. | |||||||||||||
| SbitErrorsCorrected4xUpLinkVerticalBox | 1.3.6.1.4.1.161.19.3.3.18.2.32 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Number of bit errors corrected on average per fragment on uplink at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. | |||||||||||||
| SsignalToNoiseRatioDownLinkVerticalBox | 1.3.6.1.4.1.161.19.3.3.18.2.33 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Estimated Signal to Noise Ratio in dB for the downlink. For Gen II OFDM and forward. For MIMO this is the vertical path. | |||||||||||||
| SsignalToNoiseRatioUpLinkVerticalBox | 1.3.6.1.4.1.161.19.3.3.18.2.34 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Estimated Signal to Noise Ratio in dB for the uplink. For Gen II OFDM and forward. For MIMO this is the vertical path. | |||||||||||||
| Sfragments1xDwnLinkHorizontalBox | 1.3.6.1.4.1.161.19.3.3.18.2.35 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of fragments received on downlink at 1X (QPSK). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. | |||||||||||||
| Sfragments2xDwnLinkHorizontalBox | 1.3.6.1.4.1.161.19.3.3.18.2.36 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of fragments received on downlink at 2X (16-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. | |||||||||||||
| Sfragments3xDwnLinkHorizontalBox | 1.3.6.1.4.1.161.19.3.3.18.2.37 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of fragments received on downlink at 3X (64-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. | |||||||||||||
| Sfragments4xDwnLinkHorizontalBox | 1.3.6.1.4.1.161.19.3.3.18.2.38 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of fragments received on downlink at 4X (256-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. | |||||||||||||
| Sfragments1xUpLinkHorizontalBox | 1.3.6.1.4.1.161.19.3.3.18.2.39 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of fragments received on uplink at 1X (QPSK). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. | |||||||||||||
| Sfragments2xUpLinkHorizontalBox | 1.3.6.1.4.1.161.19.3.3.18.2.40 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of fragments received on uplink at 2X (16-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. | |||||||||||||
| Sfragments3xUpLinkHorizontalBox | 1.3.6.1.4.1.161.19.3.3.18.2.41 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of fragments received on uplink at 3X (64-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. | |||||||||||||
| Sfragments4xUpLinkHorizontalBox | 1.3.6.1.4.1.161.19.3.3.18.2.42 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of fragments received on uplink at 4X (256-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. | |||||||||||||
| SbitErrorsCorrected1xDwnLinkHorizontalBox | 1.3.6.1.4.1.161.19.3.3.18.2.43 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Number of bit errors corrected on average per fragment on downlink at 1X (QPSK). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. | |||||||||||||
| SbitErrorsCorrected2xDwnLinkHorizontalBox | 1.3.6.1.4.1.161.19.3.3.18.2.44 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Number of bit errors corrected on average per fragment on downlink at 2X (16-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. | |||||||||||||
| SbitErrorsCorrected3xDwnLinkHorizontalBox | 1.3.6.1.4.1.161.19.3.3.18.2.45 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Number of bit errors corrected on average per fragment on downlink at 3X (64-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. | |||||||||||||
| SbitErrorsCorrected4xDwnLinkHorizontalBox | 1.3.6.1.4.1.161.19.3.3.18.2.46 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Number of bit errors corrected on average per fragment on downlink at 4X (256-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. | |||||||||||||
| SbitErrorsCorrected1xUpLinkHorizontalBox | 1.3.6.1.4.1.161.19.3.3.18.2.47 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Number of bit errors corrected on average per fragment on uplink at 1X (QPSK). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. | |||||||||||||
| SbitErrorsCorrected2xUpLinkHorizontalBox | 1.3.6.1.4.1.161.19.3.3.18.2.48 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Number of bit errors corrected on average per fragment on uplink at 2X (16-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. | |||||||||||||
| SbitErrorsCorrected3xUpLinkHorizontalBox | 1.3.6.1.4.1.161.19.3.3.18.2.49 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Engineering use only. Number of bit errors corrected on average per fragment on uplink at 3X (64-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. | |||||||||||||
| SbitErrorsCorrected4xUpLinkHorizontalBox | 1.3.6.1.4.1.161.19.3.3.18.2.50 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Number of bit errors corrected on average per fragment on uplink at 4X (256-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. | |||||||||||||
| SsignalToNoiseRatioDownLinkHorizontalBox | 1.3.6.1.4.1.161.19.3.3.18.2.51 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Estimated Signal to Noise Ratio in dB for the downlink. For MIMO and forward. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0. | |||||||||||||
| SsignalToNoiseRatioUpLinkHorizontalBox | 1.3.6.1.4.1.161.19.3.3.18.2.52 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Estimated Signal to Noise Ratio in dB for the uplink. For Gen II OFDM and forward. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0. | |||||||||||||
| SdownLinkRateExtrapolatedBox | 1.3.6.1.4.1.161.19.3.3.18.2.53 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Extrapolated Downlink Rate from an extrapolated link test. Extrapolated Link Test sends only a few packets over the link and extrapolates this out to what would happen on a full link test. This is an estimation of the throughput based upon the modulation, efficiency, and data slots available. It intended to provide a basic link test test without impacting service for the sector.
| |||||||||||||
| SupLinkRateExtrapolatedBox | 1.3.6.1.4.1.161.19.3.3.18.2.54 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Extrapolated Uplink Rate from an extrapolated link test. Extrapolated Link Test sends only a few packets over the link and extrapolates this out to what would happen on a full link test. This is an estimation of the throughput based upon the modulation, efficiency, and data slots available. It intended to provide a basic link test test without impacting service for the sector.
| |||||||||||||
| SlinkTestLastRunTime | 1.3.6.1.4.1.161.19.3.3.18.2.55 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Time and Date when last link test ran. | |||||||||||||
| SlinkTestMissedFragDwnLink | 1.3.6.1.4.1.161.19.3.3.18.2.56 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of missed fragments during link test in the downlink. Only supported on 450 and 450i. | |||||||||||||
| SlinkTestMissedFragUpLink | 1.3.6.1.4.1.161.19.3.3.18.2.57 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of missed fragments during link test in the uplink. Only supported on 450 and 450i. | |||||||||||||
| SlinkTestNumPktTxActCnt | 1.3.6.1.4.1.161.19.3.3.18.2.58 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of actual packets transmitted during link test. | |||||||||||||
| SlinkTestNumPktTxExpCnt | 1.3.6.1.4.1.161.19.3.3.18.2.59 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of expected packets to be transmitted during link test. | |||||||||||||
| SlinkTestNumPktRxActCnt | 1.3.6.1.4.1.161.19.3.3.18.2.60 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of actual packets received during link test. | |||||||||||||
| SlinkTestNumPktRxExpCnt | 1.3.6.1.4.1.161.19.3.3.18.2.61 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of packets expected to be received during link test. | |||||||||||||
| SlinkTestNumInProgCnt | 1.3.6.1.4.1.161.19.3.3.18.2.62 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of Link Test Initiations ignored because we were actively executing a link test. | |||||||||||||
| SwhispRegStatusBox | 1.3.6.1.4.1.161.19.3.3.18.4 | DisplayString | RO | obsolete | |||||||||
scalar · DisplayString · read-only · obsolete This shows the registration status of a link. | |||||||||||||
| NwhispBoxLinkTestMVCResult | 1.3.6.1.4.1.161.19.3.3.18.5 | ||||||||||||
| SlinkTestMVCXmtFragsTotalDL | 1.3.6.1.4.1.161.19.3.3.18.5.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Total Downlink Fragments Transmitted | |||||||||||||
| SlinkTestMVCRcvFragsTotalDL | 1.3.6.1.4.1.161.19.3.3.18.5.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Total Downlink Fragments Received | |||||||||||||
| SlinkTestMVCThroughputTotalDL | 1.3.6.1.4.1.161.19.3.3.18.5.3 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Total Downlink Throughput for Tested Data Channels | |||||||||||||
| SlinkTestMVCThroughputTotalUntestedVCsDL | 1.3.6.1.4.1.161.19.3.3.18.5.4 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Total Downlink Throughput for Untested VCs. This is the amount of user traffic that was transmitted to VCs during the test that were not part of the Link Test. This OID is now deprecated. Please use linkTestMVCThroughputTotalUntestedDataChannelsDL instead. | |||||||||||||
| SlinkTestMVCEfficiencyTotalDL | 1.3.6.1.4.1.161.19.3.3.18.5.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Total Downlink Efficiency | |||||||||||||
| SlinkTestMVCSlotDistributionDL | 1.3.6.1.4.1.161.19.3.3.18.5.6 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Downlink Slot Distribution. Average group size per slot per frame represented as a percentage. 450m only. | |||||||||||||
| SlinkTestMVCThroughputTotalUntestedDataChannelsDL | 1.3.6.1.4.1.161.19.3.3.18.5.7 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Total Downlink Throughput for Untested Data Channels. This is the amount of user traffic that was transmitted to Data Channels during the test that were not part of the Link Test. | |||||||||||||
| SlinkTestMVCXmtFragsTotalUL | 1.3.6.1.4.1.161.19.3.3.18.5.8 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Total Uplink Fragments Transmitted | |||||||||||||
| SlinkTestMVCRcvFragsTotalUL | 1.3.6.1.4.1.161.19.3.3.18.5.9 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Total Uplink Fragments Received | |||||||||||||
| SlinkTestMVCThroughputTotalUL | 1.3.6.1.4.1.161.19.3.3.18.5.10 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Total Uplink Throughput for Tested Data Channels | |||||||||||||
| SlinkTestMVCThroughputTotalUntestedDataChannelsUL | 1.3.6.1.4.1.161.19.3.3.18.5.11 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Total Uplink Throughput for Untested Data Channels. This is the amount of user traffic that was transmitted to Data Channels during the test that were not part of the Link Test. | |||||||||||||
| SlinkTestMVCEfficiencyTotalUL | 1.3.6.1.4.1.161.19.3.3.18.5.12 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Total Uplink Efficiency | |||||||||||||
| SlinkTestMVCSlotDistributionUL | 1.3.6.1.4.1.161.19.3.3.18.5.13 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Uplink Slot Distribution. Average group size per slot per frame represented as a percentage. 450m only. | |||||||||||||
| SlinkTestMVCAverageGroupSizeDL | 1.3.6.1.4.1.161.19.3.3.18.5.14 | INTEGER (0..100) | RO | ||||||||||
scalar · INTEGER (0..100) · read-only · current Average Downlink aggregate group size. Only Valid after Link Test with Multiple LUIDs has been run. This value is scaled up by 10 (ie. 26 = 2.6). MU-MIMO Only | |||||||||||||
| SlinkTestMVCAverageGroupSizeUL | 1.3.6.1.4.1.161.19.3.3.18.5.15 | INTEGER (0..100) | RO | ||||||||||
scalar · INTEGER (0..100) · read-only · current Average Uplink aggregate group size. Only Valid after Link Test with Multiple LUIDs has been run. This value is scaled up by 10 (ie. 26 = 2.6). MU-MIMO Only | |||||||||||||
| TwhispBoxLinkTestMVCTable | 1.3.6.1.4.1.161.19.3.3.18.6 | NA | |||||||||||
table · not-accessible · current Link Test with Multiple VC results. | |||||||||||||
| RwhispBoxLinkTestMVCEntry | 1.3.6.1.4.1.161.19.3.3.18.6.1 | NA | |||||||||||
| ClinkTestMVCVC | 1.3.6.1.4.1.161.19.3.3.18.6.1.1 | INTEGER (0..255) | RO | ||||||||||
column · INTEGER (0..255) · read-only · current VC | |||||||||||||
| ClinkTestMVCPriority | 1.3.6.1.4.1.161.19.3.3.18.6.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Data Channel Priority
| |||||||||||||
| ClinkTestMVCXmtFragsDL | 1.3.6.1.4.1.161.19.3.3.18.6.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Downlink Fragments Transmitted | |||||||||||||
| ClinkTestMVCRcvFragsDL | 1.3.6.1.4.1.161.19.3.3.18.6.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Downlink Fragments Received | |||||||||||||
| ClinkTestMVCThroughputDL | 1.3.6.1.4.1.161.19.3.3.18.6.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Downlink Throughput | |||||||||||||
| ClinkTestMVCEfficiencyDL | 1.3.6.1.4.1.161.19.3.3.18.6.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Downlink Efficiency | |||||||||||||
| ClinkTestMVCSumimoModRateDL | 1.3.6.1.4.1.161.19.3.3.18.6.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Downlink SU-MIMO Modulation Transmit Rate. 0 : No session 1 : 1X QPSK MIMO-A 2 : 2X 16-QAM MIMO-A or QPSK MIMO-B 3 : 3X 64-QAM MIMO-A or 8-QAM MIMO-B 4 : 4X 256-QAM MIMO-A or 16-QAM MIMO-B 5 : 5X 32-QAM MIMO-B 6 : 6X 64-QAM MIMO-B 7 : 7X 128-QAM MIMO-B 8 : 8X 256-QAM MIMO-B
| |||||||||||||
| ClinkTestMVCSumimoXmtModeDL | 1.3.6.1.4.1.161.19.3.3.18.6.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Downlink SU-MIMO Transmit Mode. 0 : MIMO-B 1 : MIMO-A 3 : No session
| |||||||||||||
| ClinkTestMVCMumimoModRateDL | 1.3.6.1.4.1.161.19.3.3.18.6.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Downlink MU-MIMO Modulation Transmit Rate. 450m only. 0 : Invalid 1 : 1X QPSK MIMO-A 2 : 2X 16-QAM MIMO-A or QPSK MIMO-B 3 : 3X 64-QAM MIMO-A or 8-QAM MIMO-B 4 : 4X 256-QAM MIMO-A or 16-QAM MIMO-B 5 : 5X 32-QAM MIMO-B 6 : 6X 64-QAM MIMO-B 7 : 7X 128-QAM MIMO-B 8 : 8X 256-QAM MIMO-B
| |||||||||||||
| ClinkTestMVCMumimoXmtModeDL | 1.3.6.1.4.1.161.19.3.3.18.6.1.10 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Downlink MU-MIMO Transmit Mode. 450m only. 0 : MIMO-B 1 : MIMO-A 3 : Invalid
| |||||||||||||
| ClinkTestMVCGroupingRatioDL | 1.3.6.1.4.1.161.19.3.3.18.6.1.11 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Downlink Grouping Ratio. The percentage of time that a Data Channel is grouped with other Data Channels to make a MU-MIMO group. 450m only. | |||||||||||||
| ClinkTestMVCLuid | 1.3.6.1.4.1.161.19.3.3.18.6.1.12 | INTEGER (2..239) | RO | ||||||||||
column · INTEGER (2..239) · read-only · current Luid | |||||||||||||
| ClinkTestMVCXmtFragsUL | 1.3.6.1.4.1.161.19.3.3.18.6.1.13 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Uplink Fragments Transmitted | |||||||||||||
| ClinkTestMVCRcvFragsUL | 1.3.6.1.4.1.161.19.3.3.18.6.1.14 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Uplink Fragments Received | |||||||||||||
| ClinkTestMVCThroughputUL | 1.3.6.1.4.1.161.19.3.3.18.6.1.15 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Uplink Throughput | |||||||||||||
| ClinkTestMVCEfficiencyUL | 1.3.6.1.4.1.161.19.3.3.18.6.1.16 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Uplink Efficiency | |||||||||||||
| ClinkTestMVCSumimoModRateUL | 1.3.6.1.4.1.161.19.3.3.18.6.1.17 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Uplink SU-MIMO Modulation Transmit Rate. 0 : No session 1 : 1X QPSK MIMO-A 2 : 2X 16-QAM MIMO-A or QPSK MIMO-B 3 : 3X 64-QAM MIMO-A or 8-QAM MIMO-B 4 : 4X 256-QAM MIMO-A or 16-QAM MIMO-B 5 : 5X 32-QAM MIMO-B 6 : 6X 64-QAM MIMO-B 7 : 7X 128-QAM MIMO-B 8 : 8X 256-QAM MIMO-B
| |||||||||||||
| ClinkTestMVCSumimoXmtModeUL | 1.3.6.1.4.1.161.19.3.3.18.6.1.18 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Uplink SU-MIMO Transmit Mode. 0 : MIMO-B 1 : MIMO-A 3 : No session
| |||||||||||||
| ClinkTestMVCMumimoModRateUL | 1.3.6.1.4.1.161.19.3.3.18.6.1.19 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Uplink MU-MIMO Modulation Transmit Rate. 450m only. 0 : Invalid 1 : 1X QPSK MIMO-A 2 : 2X 16-QAM MIMO-A or QPSK MIMO-B 3 : 3X 64-QAM MIMO-A or 8-QAM MIMO-B 4 : 4X 256-QAM MIMO-A or 16-QAM MIMO-B 5 : 5X 32-QAM MIMO-B 6 : 6X 64-QAM MIMO-B 7 : 7X 128-QAM MIMO-B 8 : 8X 256-QAM MIMO-B
| |||||||||||||
| ClinkTestMVCMumimoXmtModeUL | 1.3.6.1.4.1.161.19.3.3.18.6.1.20 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Uplink MU-MIMO Transmit Mode. 450m only. 0 : MIMO-B 1 : MIMO-A 3 : Invalid
| |||||||||||||
| ClinkTestMVCGroupingRatioUL | 1.3.6.1.4.1.161.19.3.3.18.6.1.21 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Uplink Grouping Ratio. The percentage of time that a Data Channel is grouped with other Data Channels to make a MU-MIMO group. 450m only. | |||||||||||||
| ClinkTestMVCAverageRateDL | 1.3.6.1.4.1.161.19.3.3.18.6.1.22 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Downlink Average Rate. The average Downlink modulation rate during the link test (SU-MIMO and MU-MIMO combined). This value is scaled up by 10 (ie. 69 = 6.9X average rate) 450m only. | |||||||||||||
| ClinkTestMVCAverageRateUL | 1.3.6.1.4.1.161.19.3.3.18.6.1.23 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Uplink Average Rate. The average Uplink modulation rate during the link test (SU-MIMO and MU-MIMO combined). This value is scaled up by 10 (ie. 69 = 6.9X average rate) 450m only. | |||||||||||||
| TwhispBoxLinkTestMVCSlotGroupingTable | 1.3.6.1.4.1.161.19.3.3.18.7 | NA | |||||||||||
table · not-accessible · current Link Test with Multiple VC Slot Grouping results. | |||||||||||||
| RwhispBoxLinkTestMVCSlotGroupingEntry | 1.3.6.1.4.1.161.19.3.3.18.7.1 | NA | |||||||||||
row · not-accessible · current Link Test with Multiple VC Slot Grouping results. Only Valid after Link Test with Multiple VC has been run MU-MIMO Only
| |||||||||||||
| ClinkTestMVCGroupSize | 1.3.6.1.4.1.161.19.3.3.18.7.1.1 | INTEGER (1..7) | RO | ||||||||||
column · INTEGER (1..7) · read-only · current Group Size Only Valid after Link Test with Multiple LUIDs has been run. MU-MIMO Only | |||||||||||||
| ClinkTestMVCDistributionPercent | 1.3.6.1.4.1.161.19.3.3.18.7.1.2 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current Average Downlink group size per slot per frame represented as a percentage. Only Valid after Link Test with Multiple LUIDs has been run. This value is scaled up by 10 (ie. 169 = 16.9%). MU-MIMO Only | |||||||||||||
| ClinkTestMVCAvgSlotCount | 1.3.6.1.4.1.161.19.3.3.18.7.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Average Downlink Slot Count Only Valid after Link Test with Multiple LUIDs has been run. MU-MIMO Only | |||||||||||||
| ClinkTestMVCDistributionPercentUL | 1.3.6.1.4.1.161.19.3.3.18.7.1.4 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current Average Uplink group size per slot per frame represented as a percentage. Only Valid after Link Test with Multiple LUIDs has been run. This value is scaled up by 10 (ie. 169 = 16.9%). MU-MIMO Only | |||||||||||||
| ClinkTestMVCAvgSlotCountUL | 1.3.6.1.4.1.161.19.3.3.18.7.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Average Uplink Slot Count Only Valid after Link Test with Multiple LUIDs has been run. MU-MIMO Only | |||||||||||||
| NwhispUserAuthSecurity | 1.3.6.1.4.1.161.19.3.3.19 | ||||||||||||
| TcertTableUserAuth | 1.3.6.1.4.1.161.19.3.3.19.1 | NA | |||||||||||
table · not-accessible · current The table of CA Certificates for User Auth on radio. | |||||||||||||
| RcertEntryUserAuth | 1.3.6.1.4.1.161.19.3.3.19.1.1 | NA | |||||||||||
| CcertIdx | 1.3.6.1.4.1.161.19.3.3.19.1.1.1 | INTEGER (3..4) | RO | ||||||||||
column · INTEGER (3..4) · read-only · current User information table index. | |||||||||||||
| CcertStatus | 1.3.6.1.4.1.161.19.3.3.19.1.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current 0: Inactive 1: Active
| |||||||||||||
| CcertAction | 1.3.6.1.4.1.161.19.3.3.19.1.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current 0: No Operation 1: Delete Certificate
| |||||||||||||
| CcertDN | 1.3.6.1.4.1.161.19.3.3.19.1.1.4 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Distinguished Name of Certificate | |||||||||||||
| TwhispL3PVIDMapTable | 1.3.6.1.4.1.161.19.3.3.20 | NA | |||||||||||
table · not-accessible · current Active VLAN L3 port VID Mapping table. | |||||||||||||
| RwhispL3PVIDMapEntry | 1.3.6.1.4.1.161.19.3.3.20.1 | NA | |||||||||||
| Cl3PVIDMapKey | 1.3.6.1.4.1.161.19.3.3.20.1.1 | INTEGER (0..4094) | RO | ||||||||||
column · INTEGER (0..4094) · read-only · current L3 PVID Mapping Key. | |||||||||||||
| Cl3PVIDIpAddress | 1.3.6.1.4.1.161.19.3.3.20.1.2 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current L3 PVID IP Address. | |||||||||||||
| Cl3PVIDNetmask | 1.3.6.1.4.1.161.19.3.3.20.1.3 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current L3 PVID IP Netmask. | |||||||||||||
| Cl3PVIDMapVlan | 1.3.6.1.4.1.161.19.3.3.20.1.4 | INTEGER (0..4094) | RO | ||||||||||
column · INTEGER (0..4094) · read-only · current L3 PVID Mapping VLAN. | |||||||||||||
| Cl3PVIDPriorityMode | 1.3.6.1.4.1.161.19.3.3.20.1.5 | INTEGER (0..1) | RO | ||||||||||
column · INTEGER (0..1) · read-only · current L3 PVID Mapping Priority mode. | |||||||||||||
| Cl3PVIDPriority | 1.3.6.1.4.1.161.19.3.3.20.1.6 | INTEGER (0..7) | RO | ||||||||||
column · INTEGER (0..7) · read-only · current L3 PVID Mapping Priority. | |||||||||||||
| NwhispBoxCbrsConfig | 1.3.6.1.4.1.161.19.3.3.21 | ||||||||||||
| ScbsdCpiEncodedData | 1.3.6.1.4.1.161.19.3.3.21.1 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The CPI installation data encoded and signed using JOSE JSON web signature. JOSE compact serialization should be used by concatenating the protectedHeader, encodedCpiSignedData and digitalSignature fields with '.' | |||||||||||||
| ScbsdLatitude | 1.3.6.1.4.1.161.19.3.3.21.2 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The Latitude of the CBSD in decimal degrees. | |||||||||||||
| ScbsdLongitude | 1.3.6.1.4.1.161.19.3.3.21.3 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The Longitude of the CBSD in decimal degrees. | |||||||||||||
| ScbsdHeight | 1.3.6.1.4.1.161.19.3.3.21.4 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The Height of the CBSD in Meters. | |||||||||||||
| ScbsdHeightType | 1.3.6.1.4.1.161.19.3.3.21.5 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current AGL or AMSL. AGL height is measured relative to the ground level and AMSL height is measured relative to the mean sea level. | |||||||||||||
| ScbsdHorizontalAccuracy | 1.3.6.1.4.1.161.19.3.3.21.6 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Indicates the accuracy of the CBSD antenna horizontal location. As per FCC requirement it should be less than 50 meters.
| |||||||||||||
| ScbsdVerticalAccuracy | 1.3.6.1.4.1.161.19.3.3.21.7 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Indicates the accuracy of the CBSD antenna vertical location. As per FCC requirement it should be less than 3 meters.
| |||||||||||||
| ScbsdAntennaAzimuth | 1.3.6.1.4.1.161.19.3.3.21.8 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Boresight direction of the horizontal plane of the antenna in degrees with respect to true north. A value of 0 degrees means true north; a value of 90 degrees means east.
| |||||||||||||
| ScbsdAntennaDownTilt | 1.3.6.1.4.1.161.19.3.3.21.9 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Antenna downtilt in degrees. A negative value means the antenna is tilted up (above horizontal).
| |||||||||||||
| ScbsdAntennaGain | 1.3.6.1.4.1.161.19.3.3.21.10 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Peak antenna gain in dBi.
| |||||||||||||
| ScbsdAntennaBeamwidth | 1.3.6.1.4.1.161.19.3.3.21.11 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current 3 dB antenna beamwidth of the antenna in the horizontal-plane in degrees. This can be specified only if an external antenna is used. Note: A value of 360 (degrees) means the antenna has an omnidirectional radiation pattern in the horizontal plane.
| |||||||||||||
| ScbsdEirpCapability | 1.3.6.1.4.1.161.19.3.3.21.12 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Maximum EIRP the radio is capable of.
| |||||||||||||
| ScbsdCpiInstallerId | 1.3.6.1.4.1.161.19.3.3.21.13 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current ID of the Certified Professional Installer who installed the radio. | |||||||||||||
| ScbsdCpiInstallerName | 1.3.6.1.4.1.161.19.3.3.21.14 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Name of the Certified Professional Installer who installed the radio. | |||||||||||||
| ScbsdCpiInstallCertTime | 1.3.6.1.4.1.161.19.3.3.21.15 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Time at which the Certified Professional Installer certified the radio installation parameters | |||||||||||||
| NwhispBoxGPS | 1.3.6.1.4.1.161.19.3.3.22 | ||||||||||||
| SgpsTrackingMode | 1.3.6.1.4.1.161.19.3.3.22.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current GPS tracking mode. Available for AP and MicroPop as SM | |||||||||||||
| SgpsTime | 1.3.6.1.4.1.161.19.3.3.22.2 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current GPS time. Available for AP and MicroPop as SM | |||||||||||||
| SgpsDate | 1.3.6.1.4.1.161.19.3.3.22.3 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current GPS date. Available for AP and MicroPop as SM | |||||||||||||
| SgpsSatellitesTracked | 1.3.6.1.4.1.161.19.3.3.22.4 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Returns Current number of satellites GPS is tracking in string format. Use gpsSatellitesTrackedInt to get the value in integer. Available for AP and MicroPop as SM | |||||||||||||
| SgpsSatellitesTrackedInt | 1.3.6.1.4.1.161.19.3.3.22.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current number of satellites GPS is tracking in integer format. Available for AP and MicroPop as SM | |||||||||||||
| SgpsSatellitesVisible | 1.3.6.1.4.1.161.19.3.3.22.6 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Return Number of satellites GPS is seeing in string format. Use gpsSatellitesVisibleInt to get value in integer. Available for AP and MicroPop as SM | |||||||||||||
| SgpsSatellitesVisibleInt | 1.3.6.1.4.1.161.19.3.3.22.7 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of satellites the GPS sees in integer format. Available for AP and MicroPop as SM | |||||||||||||
| SgpsHeight | 1.3.6.1.4.1.161.19.3.3.22.8 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current GPS height. Available for AP and MicroPop as SM | |||||||||||||
| SgpsLatitude | 1.3.6.1.4.1.161.19.3.3.22.9 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current GPS Latitude. Available for AP and MicroPop as SM | |||||||||||||
| SgpsLongitude | 1.3.6.1.4.1.161.19.3.3.22.10 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current GPS Longitude. Available for AP and MicroPop as SM | |||||||||||||
| SgpsInvalidMsg | 1.3.6.1.4.1.161.19.3.3.22.11 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Number of invalid messages. Available for AP and MicroPop as SM | |||||||||||||
| SgpsReceiverInfo | 1.3.6.1.4.1.161.19.3.3.22.12 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current A textual string contains information on GPS receiver. Available for AP and MicroPop as SM | |||||||||||||
| SuGPSPower | 1.3.6.1.4.1.161.19.3.3.22.13 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable or Disable aux port power to Universal GPS module (UGPS capable radios only, when GPS_output_enable is NOT set).
| |||||||||||||
| SgnssSearchMode | 1.3.6.1.4.1.161.19.3.3.22.14 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Set the GNSS search mode on applicable platforms. This is a + separate string of possible names GPS, GLONASS, Galileo, and Beidou. For example, setting to GPS+GLONASS+Galileo will enable GPS GLONASS, and Galileo systems while GPS will only enable GPS system. Note that some of these may be rejected if they are not allowed due to regulatory reasons. | |||||||||||||
| SgnssDataSourceOverride | 1.3.6.1.4.1.161.19.3.3.22.15 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set the default GNSS Data source for this device. 0 = Automatic: let radio algorithm choose the data source 1 = iGPS: use only internal GPS data source 2 = UGPS: use only external UGPS or cnPulse source
| |||||||||||||
| SgpsSatellitesUsed | 1.3.6.1.4.1.161.19.3.3.22.16 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Returns Current number of satellites GPS is used for fix in string format. Use gpsSatellitesUsedInt to get the value in integer. Available for AP and MicroPop as SM | |||||||||||||
| SgpsSatellitesUsedInt | 1.3.6.1.4.1.161.19.3.3.22.17 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current number of satellites GPS is used for fix in integer format. Available for AP and MicroPop as SM | |||||||||||||
| NwhispBoxMACAddressFiltering | 1.3.6.1.4.1.161.19.3.3.23 | ||||||||||||
| NwhispMACAddressFilterConfig | 1.3.6.1.4.1.161.19.3.3.23.1 | ||||||||||||
| SenableMACAddressFilter | 1.3.6.1.4.1.161.19.3.3.23.1.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable (1) or Disable(0) MAC Access filtering.
| |||||||||||||
| SdefaultMACAddressFilterAction | 1.3.6.1.4.1.161.19.3.3.23.1.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Allow (1) or Deny(0) unlisted MAC Addresses by default.
| |||||||||||||
| SaddModifyMACAddressFilterAction | 1.3.6.1.4.1.161.19.3.3.23.1.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Allow (1) or Deny (0) Access for MAC address.
| |||||||||||||
| SaddModifyMACAddressFilter | 1.3.6.1.4.1.161.19.3.3.23.1.4 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Add MAC address for address filters, MAC can be specified in any of the following formats aa:bb:cc:dd:ee:ff, aa-bb-cc-dd-ee-ff, aabbccddeeff. For allowing all MAC addresses of a particular OUI use aa:bb:cc:* or aa-bb-cc-* or aabbcc* format. | |||||||||||||
| SrmMACAddressFilter | 1.3.6.1.4.1.161.19.3.3.23.1.5 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Remove MAC address for address filters, MAC can be specified in any of the following formats aa:bb:cc:dd:ee:ff, aa-bb-cc-dd-ee-ff, aabbccddeeff. For removing OUI MAC use aa:bb:cc:* or aa-bb-cc-* or aabbcc* format. | |||||||||||||
| TwhispMacAddressFilterTable | 1.3.6.1.4.1.161.19.3.3.23.2 | NA | |||||||||||
table · not-accessible · current The table of MAC Address filters. | |||||||||||||
| RwhispMacAddressFilterEntry | 1.3.6.1.4.1.161.19.3.3.23.2.1 | NA | |||||||||||
| CfilterMacAddressEntry | 1.3.6.1.4.1.161.19.3.3.23.2.1.1 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Configured MAC Access filter | |||||||||||||
| CfilterMacAddressAction | 1.3.6.1.4.1.161.19.3.3.23.2.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Configured MAC Address filter action (allow/deny) | |||||||||||||
| NwhispAfcStatus | 1.3.6.1.4.1.161.19.3.3.24 | ||||||||||||
| SafcSpectrumAvailListInfo | 1.3.6.1.4.1.161.19.3.3.24.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current This gives the spectrum availability information received from Automated Frequency Coordination server | |||||||||||||
| SafcSpectrumExpiry | 1.3.6.1.4.1.161.19.3.3.24.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This gives the spectrum availability information received from Automated Frequency Coordination server | |||||||||||||
| SafcServerVersion | 1.3.6.1.4.1.161.19.3.3.24.3 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Automated Frequency Coordination server version | |||||||||||||
| SafcState | 1.3.6.1.4.1.161.19.3.3.24.4 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Current state of Automated Frequency Coordination | |||||||||||||
| SafcLatitude | 1.3.6.1.4.1.161.19.3.3.24.5 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Device latitude which is reported to the Automated Frequency Coordination server | |||||||||||||
| SafcLongitude | 1.3.6.1.4.1.161.19.3.3.24.6 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Device longitude which is reported to the Automated Frequency Coordination server | |||||||||||||
| SafcDescription | 1.3.6.1.4.1.161.19.3.3.24.7 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Current state description of Automated Frequency Coordination | |||||||||||||
| SafcAuthTokenStatus | 1.3.6.1.4.1.161.19.3.3.24.8 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Current status of Automated Frequency Coordination Authorization token | |||||||||||||
Traps / Notifications
- boxLan1DHCPClientEvent
1.3.6.1.4.1.161.19.3.3.12.1.1 - boxPoEType2PowerNotPresent
1.3.6.1.4.1.161.19.3.3.12.2.1 - minModRateEvent
1.3.6.1.4.1.161.19.3.3.12.4.1 - radioStatusAlarmEvent
1.3.6.1.4.1.161.19.3.3.12.3.1
Groups and compliance
- whispBoxAttributesGroup
- whispBoxBTGroup
- whispBoxCBRSGroup
- whispBoxCPTableGroup
- whispBoxControlGroup
- whispBoxL3PVIDMapTableGroup
- whispBoxLinkTestGroup
- whispBoxNotifGroup
- whispBoxSNMPv3Group
- whispBoxUserTableGroup
- whispBoxVLANRemarkTableGroup
- whispBoxVLANTableGroup
- whispLayer2NeighborTableGroup
- whispMACAddressFilterGroup