WHISP-APS-MIB
MotorolaThis module contains MIB definitions for APs.
snmptranslate -m WHISP-APS-MIB -Tpsnmpwalk -v2c -c <community> -m WHISP-APS-MIB <host> 1.3.6.1.4.1.161.19.1.1.12Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION |
| WHISP-BOX-MIBV2-MIB | whispBoxEsn, whispBoxRFPhysicalRadioEntry |
| WHISP-GLOBAL-REG-MIB | whispAps, whispBox, whispModules |
| WHISP-TCV2-MIB | EventString, WhispLUID, WhispMACAddress |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IwhispApsMibModule | 1.3.6.1.4.1.161.19.1.1.12 | ||||||||||||
identity This module contains MIB definitions for APs. | |||||||||||||
| NwhispApsConfig | 1.3.6.1.4.1.161.19.3.1.1 | ||||||||||||
| SgpsInput | 1.3.6.1.4.1.161.19.3.1.1.1 | INTEGER | RW | obsolete | |||||||||
scalar · INTEGER · read-write · obsolete The variable is obsolete. See gpsInput in whispBoxConfig.
| |||||||||||||
| SrfFreqCarrier | 1.3.6.1.4.1.161.19.3.1.1.2 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated The primary transmit frequency. Also see radioFreqCarrier.
| |||||||||||||
| SapLinkSpeed | 1.3.6.1.4.1.161.19.3.1.1.3 | DisplayString | RW | obsolete | |||||||||
scalar · DisplayString · read-write · obsolete The variable is deprecated. | |||||||||||||
| SdwnLnkData | 1.3.6.1.4.1.161.19.3.1.1.4 | INTEGER (1..99) | RW | deprecated | |||||||||
scalar · INTEGER (1..99) · read-write · deprecated This attribute is deprecated. Please see radioDownlinkPercent.
| |||||||||||||
| ShighPriorityUpLnkPct | 1.3.6.1.4.1.161.19.3.1.1.5 | INTEGER (0..99) | RW | obsolete | |||||||||
scalar · INTEGER (0..99) · read-write · obsolete Percentage of uplink slots for high priority data.
| |||||||||||||
| SnumUAckSlots | 1.3.6.1.4.1.161.19.3.1.1.6 | INTEGER | RW | obsolete | |||||||||
scalar · INTEGER · read-write · obsolete Total number of upstream ack slots. | |||||||||||||
| SuAcksReservHigh | 1.3.6.1.4.1.161.19.3.1.1.7 | INTEGER | RW | obsolete | |||||||||
scalar · INTEGER · read-write · obsolete Total number of upstream high priority ack slots | |||||||||||||
| SnumDAckSlots | 1.3.6.1.4.1.161.19.3.1.1.8 | INTEGER | RW | obsolete | |||||||||
scalar · INTEGER · read-write · obsolete Total number of downstream ack slots. | |||||||||||||
| SdAcksReservHigh | 1.3.6.1.4.1.161.19.3.1.1.9 | INTEGER | RW | obsolete | |||||||||
scalar · INTEGER · read-write · obsolete Total number of high priority downstream ack slots. | |||||||||||||
| SnumCtlSlots | 1.3.6.1.4.1.161.19.3.1.1.10 | INTEGER | RW | obsolete | |||||||||
scalar · INTEGER · read-write · obsolete This OID is deprecated, please use numCtlSlotsHW. | |||||||||||||
| SnumCtlSlotsReserveHigh | 1.3.6.1.4.1.161.19.3.1.1.11 | INTEGER | RW | obsolete | |||||||||
scalar · INTEGER · read-write · obsolete Total number of High priority upstream control (contention) slots. | |||||||||||||
| SupLnkDataRate | 1.3.6.1.4.1.161.19.3.1.1.12 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Sustained uplink bandwidth cap.
| |||||||||||||
| SupLnkLimit | 1.3.6.1.4.1.161.19.3.1.1.13 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Burst uplink bandwidth cap.
| |||||||||||||
| SdwnLnkDataRate | 1.3.6.1.4.1.161.19.3.1.1.14 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Sustained downlink bandwidth cap.
| |||||||||||||
| SdwnLnkLimit | 1.3.6.1.4.1.161.19.3.1.1.15 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Burst downlink bandwidth cap.
| |||||||||||||
| SsectorID | 1.3.6.1.4.1.161.19.3.1.1.16 | INTEGER (0..15) | RW | ||||||||||
scalar · INTEGER (0..15) · read-write · current Advertise sector number for an AP. Not supported on 450 platform. | |||||||||||||
| SmaxRange | 1.3.6.1.4.1.161.19.3.1.1.17 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated This attribute is deprecated. Please see radioMaxRange. | |||||||||||||
| SairLinkSecurity | 1.3.6.1.4.1.161.19.3.1.1.18 | INTEGER | RW | obsolete | |||||||||
scalar · INTEGER · read-write · obsolete Air Link Security. desEnhancedAndAuthentication(2) and authenticationIfAvailable(3) are only for APAS.
| |||||||||||||
| SberMode | 1.3.6.1.4.1.161.19.3.1.1.19 | INTEGER | RW | obsolete | |||||||||
scalar · INTEGER · read-write · obsolete AP backgroup BER mode.
| |||||||||||||
| SasIP1 | 1.3.6.1.4.1.161.19.3.1.1.20 | IpAddress | RW | obsolete | |||||||||
scalar · IpAddress · read-write · obsolete Obsoleted. Configure with whispApsDNS.authServer1. | |||||||||||||
| SasIP2 | 1.3.6.1.4.1.161.19.3.1.1.21 | IpAddress | RW | obsolete | |||||||||
scalar · IpAddress · read-write · obsolete Obsoleted. Configure with whispApsDNS.authServer2. | |||||||||||||
| SasIP3 | 1.3.6.1.4.1.161.19.3.1.1.22 | IpAddress | RW | obsolete | |||||||||
scalar · IpAddress · read-write · obsolete Obsoleted. Configure with whispApsDNS.authServer3. | |||||||||||||
| SlanIpAp | 1.3.6.1.4.1.161.19.3.1.1.23 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current LAN IP. | |||||||||||||
| SlanMaskAp | 1.3.6.1.4.1.161.19.3.1.1.24 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current LAN subnet mask. | |||||||||||||
| SdefaultGwAp | 1.3.6.1.4.1.161.19.3.1.1.25 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Default gateway | |||||||||||||
| SprivateIp | 1.3.6.1.4.1.161.19.3.1.1.26 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Private IP. | |||||||||||||
| SgpsTrap | 1.3.6.1.4.1.161.19.3.1.1.27 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Variable to enable/disable GPS sync/out-sync traps.
| |||||||||||||
| SregTrap | 1.3.6.1.4.1.161.19.3.1.1.28 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Variable to enable/disable registration complete/lost traps.
| |||||||||||||
| StxSpreading | 1.3.6.1.4.1.161.19.3.1.1.29 | INTEGER | RW | obsolete | |||||||||
scalar · INTEGER · read-write · obsolete Variable to enable/disable Transmit Frame Spreading. This option is for FSK only.
| |||||||||||||
| SapBeaconInfo | 1.3.6.1.4.1.161.19.3.1.1.30 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Variable to enable/disable displaying AP beacon info through AP eval.
| |||||||||||||
| SauthMode | 1.3.6.1.4.1.161.19.3.1.1.31 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Variable to enable/disable authentication. The authentication optional mode is for APs only. This variable can only be set when authentication feature is enabled. Setting it to 1 will use a BAM server for authentication of SMs. Setting it to 2 will make use of the Authentication Key on the AP for authenticating SMs. The keys must match on SM and AP in order for the SM to be authenticated in this mode.
| |||||||||||||
| SauthKeyAp | 1.3.6.1.4.1.161.19.3.1.1.32 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Authentication key 128-bit. It should be up to 32 hex characters long. Can be used on MultiPoint AP if PSK Authentication mode is selected. Otherwise, it is used on Backhauls. | |||||||||||||
| SencryptionMode | 1.3.6.1.4.1.161.19.3.1.1.33 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Variable to enable/disable encryption.
| |||||||||||||
| SntpServerIp | 1.3.6.1.4.1.161.19.3.1.1.34 | IpAddress | RW | obsolete | |||||||||
scalar · IpAddress · read-write · obsolete Obsoleted. Configure with whispApsDNS.ntpServer1, whispApsDNS.ntpServer2, and whispApsDNS.ntpServer3. | |||||||||||||
| SbroadcastRetryCount | 1.3.6.1.4.1.161.19.3.1.1.35 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Broadcast Repeat Count : Range 0 -- 2. For APs. | |||||||||||||
| SencryptDwBroadcast | 1.3.6.1.4.1.161.19.3.1.1.36 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated To enable or disable Encrypted Downlink Broadcast. For FSK APs.
| |||||||||||||
| SupdateAppAddress | 1.3.6.1.4.1.161.19.3.1.1.37 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Update Application Address. | |||||||||||||
| SdfsConfig | 1.3.6.1.4.1.161.19.3.1.1.38 | INTEGER | RW | obsolete | |||||||||
scalar · INTEGER · read-write · obsolete To configure proper regions for Dynamic Frequency Shifting. For 5.2/5.4/5.7 GHz radios.
| |||||||||||||
| SvlanEnable | 1.3.6.1.4.1.161.19.3.1.1.39 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To enable or disable VLAN.
| |||||||||||||
| SconfigSource | 1.3.6.1.4.1.161.19.3.1.1.40 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To configure CIR, MIR and VLAN through SM or BAM.
| |||||||||||||
| SapRateAdapt | 1.3.6.1.4.1.161.19.3.1.1.41 | INTEGER | RW | obsolete | |||||||||
scalar · INTEGER · read-write · obsolete To enable or disable double rate.
| |||||||||||||
| SnumCtlSlotsHW | 1.3.6.1.4.1.161.19.3.1.1.42 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated This attribute is deprecated. Please see radioControlSlots. | |||||||||||||
| SdisplayAPEval | 1.3.6.1.4.1.161.19.3.1.1.43 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current If enable, it allows display of AP Eval Data at the SM.
| |||||||||||||
| SsmIsolation | 1.3.6.1.4.1.161.19.3.1.1.44 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current (0) -- Disable SM Isolation. (1) -- Enable SM Isolation by blocking SM destined packets. (2) -- Enable SM Isolation by forwarding SM packets upstream.
| |||||||||||||
| SipAccessFilterEnable | 1.3.6.1.4.1.161.19.3.1.1.45 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To enable or disable IP access filtering to Management functions. (0) - IP access will be allowed from all addresses. (1) - IP access will be controlled using allowedIPAccess1-3 entries.
| |||||||||||||
| SallowedIPAccess1 | 1.3.6.1.4.1.161.19.3.1.1.46 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Allow access to AP Management from this IP. 0 is default setting to allow from all IPs. | |||||||||||||
| SallowedIPAccess2 | 1.3.6.1.4.1.161.19.3.1.1.47 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Allow access to AP Management from this IP. 0 is default setting to allow from all IPs. | |||||||||||||
| SallowedIPAccess3 | 1.3.6.1.4.1.161.19.3.1.1.48 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Allow access to AP Management from this IP. 0 is default setting to allow from all IPs. | |||||||||||||
| StslBridging | 1.3.6.1.4.1.161.19.3.1.1.49 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current 1 = We are performing Translation Bridging 0 = We are not.
| |||||||||||||
| SuntranslatedArp | 1.3.6.1.4.1.161.19.3.1.1.50 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current 1 = We are sending untranslated ARP response. 0 = We are not.
| |||||||||||||
| SlimitFreqBand900 | 1.3.6.1.4.1.161.19.3.1.1.51 | INTEGER | RW | obsolete | |||||||||
scalar · INTEGER · read-write · obsolete 1 = We are limiting the freq band of 900 radios. 0 = We are not. FSK radios only.
| |||||||||||||
| StxPwrLevel | 1.3.6.1.4.1.161.19.3.1.1.52 | INTEGER | RW | obsolete | |||||||||
scalar · INTEGER · read-write · obsolete Deprecated, use 'transmitterOP' instead. | |||||||||||||
| SrfFreqCaralt1 | 1.3.6.1.4.1.161.19.3.1.1.53 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current First DFS Alternate RF Frequency. (Only available for DFS radios) Used
as a backup frequency when Radar is detected on DFS enabled Radios.
The frequencies are:
5.4 radios:(5475,5485,5490 OFDM only),5495,5500,5505,5510,5515,5520,5525,
5530,5535,5540,5545,5550,5555,5560,5565,5570,5575,5580,5585,5590,5595,
5600,5605,5610,5615,5620,5625,5630,5635,5640,5645,5650,5655,5660,5665,
5670,5675,5680,5685,5690,5695,5700,5705,(5710,5715 OFDM Only).
(5.7 Platform 10 (SAL) radios with non-connectorized antennas do not support DFS)
5.7 radios:5745,5750,5755,5760,5765,5770,5775,5780,5785,5790,5795,5800,5805.
5.7 radios with ISM enabled :5735,5740,5745,5750,5755,5760,5765,5770,5775,
5780,5785,5790,5795,5800,5805,5810,5815,5820,5825,5830,5835,5840.
0: None.
| |||||||||||||
| SrfFreqCaralt2 | 1.3.6.1.4.1.161.19.3.1.1.54 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Second DFS Alternate RF Frequency. (Only available for DFS radios) Used
as a backup frequency when Radar is detected on DFS enabled Radios.
The frequencies are:
5.4 radios:(5475,5485,5490 OFDM only),5495,5500,5505,5510,5515,5520,5525,
5530,5535,5540,5545,5550,5555,5560,5565,5570,5575,5580,5585,5590,5595,
5600,5605,5610,5615,5620,5625,5630,5635,5640,5645,5650,5655,5660,5665,
5670,5675,5680,5685,5690,5695,5700,5705,(5710,5715 OFDM Only).
(5.7 Platform 10 (SAL) radios with non-connectorized antennas do not support DFS)
5.7 radios:5745,5750,5755,5760,5765,5770,5775,5780,5785,5790,5795,5800,5805.
5.7 radios with ISM enabled :5735,5740,5745,5750,5755,5760,5765,5770,5775,
5780,5785,5790,5795,5800,5805,5810,5815,5820,5825,5830,5835,5840.
0: None.
| |||||||||||||
| SscheduleWhitening | 1.3.6.1.4.1.161.19.3.1.1.55 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated 1 = Schedule Whitening allowed. 0 = Schedule Whitening not allowed. This option is for FSK only
| |||||||||||||
| SremoteSpectrumAnalysisDuration | 1.3.6.1.4.1.161.19.3.1.1.56 | INTEGER (10..1000) | RW | ||||||||||
scalar · INTEGER (10..1000) · read-write · current Value in seconds for a remote spectrum analysis on an SM. Range is 10-1000 seconds. | |||||||||||||
| SremoteSpectrumAnalyzerLUID | 1.3.6.1.4.1.161.19.3.1.1.57 | INTEGER (2..239) | RW | ||||||||||
scalar · INTEGER (2..239) · read-write · current Get will always return 0. Set will start Remote Spectrum Analyzer on specified LUID. *Warning* This will cause the SM to disconnect from the AP! You will lose the session for the specified duration! If general error was returned then the LUID does not have an active session, or the SM does not support Remote Spectrum Analysis. | |||||||||||||
| SbhReReg | 1.3.6.1.4.1.161.19.3.1.1.58 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Forces BHS reregistration every 24 hours. Enable forces reregistration and Disable does not. 24 Hour Encryption Refresh.
| |||||||||||||
| SdlnkBcastCIR | 1.3.6.1.4.1.161.19.3.1.1.59 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Downlink Broadcast CIR (kbps) | |||||||||||||
| SverifyGPSChecksum | 1.3.6.1.4.1.161.19.3.1.1.60 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable verification of GPS message checksums.
| |||||||||||||
| SapVlanOverride | 1.3.6.1.4.1.161.19.3.1.1.61 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting this option will cause an AP to retain its VLAN settings when turning it into an SM. It will be mostly helpful for running spectrum analysis on the AP. Since doing that requires the AP to be turned into an SM, enabling this option will allow you to keep the AP's VLAN configuration in place while the AP is running as an SM.
| |||||||||||||
| SdhcpRelayAgentEnable | 1.3.6.1.4.1.161.19.3.1.1.62 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable or Disable MultiPoint AP acting as DHCP Relay Agent for all SMs and Clients underneath it. (0) - Relay Agent disabled - SM/CPE devices will perform DHCP normally (1) - Relay Agent enabled - AP will intercept DHCP DISCOVER message from SM and CPE, insert Option 82 containing SM's MAC address, and forward request to specified DHCP server.
| |||||||||||||
| SdhcpRelayAgentSrvrIP | 1.3.6.1.4.1.161.19.3.1.1.63 | IpAddress | RW | obsolete | |||||||||
scalar · IpAddress · read-write · obsolete Obsoleted. Configure with whispApsDNS.dhcprServer. | |||||||||||||
| ScolorCodeRescanTimer | 1.3.6.1.4.1.161.19.3.1.1.64 | INTEGER (0..43200) | RW | ||||||||||
scalar · INTEGER (0..43200) · read-write · current Time in minutes for the subscriber to begin the idle timer. This timer will begin as soon as a session is started. This only fires if the device is in session with a non-primary color code. A value of zero (0) disables this timer (MultiPoint system Only) | |||||||||||||
| ScolorCodeRescanIdleTimer | 1.3.6.1.4.1.161.19.3.1.1.65 | INTEGER (0..60) | RW | ||||||||||
scalar · INTEGER (0..60) · read-write · current Time in minutes for the subscriber to check for an idle state. If an period has pass where no unicast RF traffic has occured (idle), then the subscriber will begin to rescan. This timer will wait until the timer set in colorCodeRescanTimer has expired before beginning. This timer only fires if the device is in session with a non-primary color code. A value of zero (0) mean to rescan without waiting for idle. (MultiPoint system Only) | |||||||||||||
| SauthKeyOptionAP | 1.3.6.1.4.1.161.19.3.1.1.66 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This option is for Multipoint APs only. This option will only be used if Authentication Mode is set to AP Pre-Shared Key. 0 - Use default 128-bit key. 1 - Use set 128-bit key.
| |||||||||||||
| SasIP4 | 1.3.6.1.4.1.161.19.3.1.1.67 | IpAddress | RW | obsolete | |||||||||
scalar · IpAddress · read-write · obsolete Obsoleted. Configure with whispApsDNS.authServer4. | |||||||||||||
| SasIP5 | 1.3.6.1.4.1.161.19.3.1.1.68 | IpAddress | RW | obsolete | |||||||||
scalar · IpAddress · read-write · obsolete Obsoleted. Configure with whispApsDNS.authServer5. | |||||||||||||
| SonlyAllowVer95OrAbove | 1.3.6.1.4.1.161.19.3.1.1.69 | INTEGER | RW | obsolete | |||||||||
scalar · INTEGER · read-write · obsolete Only allow subscribers that are running version 9.5 or above. Any radio that has a version below 9.5 will not be allowed to register.
| |||||||||||||
| SapRxDelay | 1.3.6.1.4.1.161.19.3.1.1.70 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This is used for engineering debug and needs to be removed or moved to eng MIB before releasing the MIB. | |||||||||||||
| SqinqEthType | 1.3.6.1.4.1.161.19.3.1.1.71 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current EtherType for QinQ (802.1ad) outer tag (S-Tag). 0x88a8 by default.
| |||||||||||||
| SsMTxPowerControl | 1.3.6.1.4.1.161.19.3.1.1.72 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable AP control of SM Tx power. Engineering use only.
| |||||||||||||
| SfskSMRcvTargetLvl | 1.3.6.1.4.1.161.19.3.1.1.73 | INTEGER (-80..-40) | RW | obsolete | |||||||||
scalar · INTEGER (-80..-40) · read-write · obsolete Desired SM Receive Level at AP (dBm, Range -40dBm to -80 dBm). FSK only.
| |||||||||||||
| SauthSharedSecret1 | 1.3.6.1.4.1.161.19.3.1.1.74 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Authentication Server 1 Shared Secret. | |||||||||||||
| SauthSharedSecret2 | 1.3.6.1.4.1.161.19.3.1.1.75 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Authentication Server 2 Shared Secret. | |||||||||||||
| SauthSharedSecret3 | 1.3.6.1.4.1.161.19.3.1.1.76 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Authentication Server 3 Shared Secret. | |||||||||||||
| SwhispUsrAuthSharedSecret1 | 1.3.6.1.4.1.161.19.3.1.1.79 | DisplayString | RW | obsolete | |||||||||
scalar · DisplayString · read-write · obsolete Obsoleted. Use whispApsConfig.authSharedSecret1. | |||||||||||||
| SwhispUsrAuthSharedSecret2 | 1.3.6.1.4.1.161.19.3.1.1.80 | DisplayString | RW | obsolete | |||||||||
scalar · DisplayString · read-write · obsolete Obsoleted. Use whispApsConfig.authSharedSecret2. | |||||||||||||
| SwhispUsrAuthSharedSecret3 | 1.3.6.1.4.1.161.19.3.1.1.81 | DisplayString | RW | obsolete | |||||||||
scalar · DisplayString · read-write · obsolete Obsoleted. Use whispApsConfig.authSharedSecret3. | |||||||||||||
| SwhispUsrAcctSvr1 | 1.3.6.1.4.1.161.19.3.1.1.82 | DisplayString | RW | obsolete | |||||||||
scalar · DisplayString · read-write · obsolete Obsoleted. Use whispApsDNS.authServer1. | |||||||||||||
| SwhispUsrAcctSvr2 | 1.3.6.1.4.1.161.19.3.1.1.83 | DisplayString | RW | obsolete | |||||||||
scalar · DisplayString · read-write · obsolete Obsoleted. Use whispApsDNS.authServer2. | |||||||||||||
| SwhispUsrAcctSvr3 | 1.3.6.1.4.1.161.19.3.1.1.84 | DisplayString | RW | obsolete | |||||||||
scalar · DisplayString · read-write · obsolete Obsoleted. Use whispApsDNS.authServer3. | |||||||||||||
| SwhispUsrAuthPhase1 | 1.3.6.1.4.1.161.19.3.1.1.85 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated Select method for User Authentication. This is deprecated. Please use whispUsrAuth.
| |||||||||||||
| SwhispWebUseAuthServer | 1.3.6.1.4.1.161.19.3.1.1.86 | INTEGER | RW | obsolete | |||||||||
scalar · INTEGER · read-write · obsolete Obsoleted. Use whispApsDNS.authServer[1-3].
| |||||||||||||
| SdropSession | 1.3.6.1.4.1.161.19.3.1.1.87 | WhispMACAddress | RW | ||||||||||
scalar · WhispMACAddress · read-write · current SM/BHS MAC Address to drop session from the AP/BHM. | |||||||||||||
| SuGPSPower | 1.3.6.1.4.1.161.19.3.1.1.88 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable or Disable aux port power to Universal GPS module (UGPS capable APs only, when GPS_output_enable is NOT set).
| |||||||||||||
| StimeZone | 1.3.6.1.4.1.161.19.3.1.1.89 | INTEGER (0..124) | RW | ||||||||||
scalar · INTEGER (0..124) · read-write · current Set the timezone offset for the radio. This change takes affect dynamically. The available timezones are: 0 : (UTC) UTC - Coordinated Universal Time 1 : (UTC) GMT - Greenwich Mean Time 2 : (UTC) WET - Western European Time 3 : (UTC-12) BIT - Baker Island Time 4 : (UTC-11) SST - Samoa Standard Time 5 : (UTC-10) CKT - Cook Island Time 6 : (UTC-10) HAST - Hawaii-Aleutian Standard Time 7 : (UTC-10) HST - Hawaii Standard Time 8 : (UTC-10) TAHT - Tahiti Time 9 : (UTC-09:30) MIT - Marquesas Islands Time 10 : (UTC-09) AKST - Alaska Standard Time 11 : (UTC-09) GIT - Gambier Island Time 12 : (UTC-09) HADT - Hawaii-Aleutian Daylight Time 13 : (UTC-08) AKDT - Alaska Daylight Time 14 : (UTC-08) CIST - Clipperton Island Standard Time 15 : (UTC-08) PST - Pacific Standard Time (North America) 16 : (UTC-07) MST - Mountain Standard Time (North America) 17 : (UTC-07) PDT - Pacific Daylight Time (North America) 18 : (UTC-06) CST - Central Standard Time (North America) 19 : (UTC-06) EAST - Easter Island Standard Time 20 : (UTC-06) GALT - Galapagos Time 21 : (UTC-06) MDT - Mountain Daylight Time (North America) 22 : (UTC-05) CDT - Central Daylight Time (North America) 23 : (UTC-05) COT - Colombia Time 24 : (UTC-05) ECT - Ecuador Time 25 : (UTC-05) EST - Eastern Standard Time (North America) 26 : (UTC-04:30) VET - Venezuelan Standard Time 27 : (UTC-04) AST - Atlantic Standard Time 28 : (UTC-04) BOT - Bolivia Time 29 : (UTC-04) CLT - Chile Standard Time 30 : (UTC-04) COST - Colombia Summer Time 31 : (UTC-04) ECT - Eastern Caribbean Time (does not recognise DST) 32 : (UTC-04) EDT - Eastern Daylight Time (North America) 33 : (UTC-04) FKT - Falkland Islands Time 34 : (UTC-04) GYT - Guyana Time 35 : (UTC-03:30) NST - Newfoundland Standard Time 36 : (UTC-03:30) NT - Newfoundland Time 37 : (UTC-03) ADT - Atlantic Daylight Time 38 : (UTC-03) ART - Argentina Time 39 : (UTC-03) BRT - Brasilia Time 40 : (UTC-03) CLST - Chile Summer Time 41 : (UTC-03) FKST - Falkland Islands Summer Time 42 : (UTC-03) GFT - French Guiana Time 43 : (UTC-03) UYT - Uruguay Standard Time 44 : (UTC-02:30) NDT - Newfoundland Daylight Time 45 : (UTC-02) GST - South Georgia and the South Sandwich Islands 46 : (UTC-02) UYST - Uruguay Summer Time 47 : (UTC-01) AZOST - Azores Standard Time 48 : (UTC-01) CVT - Cape Verde Time 49 : (UTC+01) BST - British Summer Time (British Standard Time from Feb 1968 to Oct 1971) 50 : (UTC+01) CET - Central European Time 51 : (UTC+01) DFT - AIX specific equivalent of Central European Time 52 : (UTC+01) IST - Irish Summer Time 53 : (UTC+01) WAT - West Africa Time 54 : (UTC+01) WEDT - Western European Daylight Time 55 : (UTC+01) WEST - Western European Summer Time 56 : (UTC+02) CAT - Central Africa Time 57 : (UTC+02) CEDT - Central European Daylight Time 58 : (UTC+02) CEST - Central European Summer Time 59 : (UTC+02) EET - Eastern European Time 60 : (UTC+02) IST - Israel Standard Time 61 : (UTC+02) SAST - South African Standard Time 62 : (UTC+03) AST - Arab Standard Time (Kuwait, Riyadh) 63 : (UTC+03) AST - Arabic Standard Time (Baghdad) 64 : (UTC+03) EAT - East Africa Time 65 : (UTC+03) EEDT - Eastern European Daylight Time 66 : (UTC+03) EEST - Eastern European Summer Time 67 : (UTC+03) MSK - Moscow Standard Time 68 : (UTC+03:30) IRST - Iran Standard Time 69 : (UTC+04) AMT - Armenia Time 70 : (UTC+04) AST - Arabian Standard Time (Abu Dhabi, Muscat) 71 : (UTC+04) AZT - Azerbaijan Time 72 : (UTC+04) GET - Georgia Standard Time 73 : (UTC+04) MSD - Moscow Summer Time 74 : (UTC+04) MUT - Mauritius Time 75 : (UTC+04) RET - Reunion Time 76 : (UTC+04) SAMT - Samara Time 77 : (UTC+04) SCT - Seychelles Time 78 : (UTC+04:30) AFT - Afghanistan Time 79 : (UTC+05) AMST - Armenia Summer Time 80 : (UTC+05) HMT - Heard and McDonald Islands Time 81 : (UTC+05) PKT - Pakistan Standard Time 82 : (UTC+05) YEKT - Yekaterinburg Time 83 : (UTC+05:30) IST - Indian Standard Time 84 : (UTC+05:30) SLT - Sri Lanka Time 85 : (UTC+05:45) NPT - Nepal Time 86 : (UTC+06) BIOT - British Indian Ocean Time 87 : (UTC+06) BST - Bangladesh Standard Time 88 : (UTC+06) BTT - Bhutan Time 89 : (UTC+06) OMST - Omsk Time 90 : (UTC+06:30) CCT - Cocos Islands Time 91 : (UTC+06:30) MST - Myanmar Standard Time 92 : (UTC+07) CXT - Christmas Island Time 93 : (UTC+07) ICT - Indochina Time 94 : (UTC+07) KRAT - Krasnoyarsk Time 95 : (UTC+07) THA - Thailand Standard Time 96 : (UTC+08) ACT - ASEAN Common Time 97 : (UTC+08) AWST - Australian Western Standard Time 98 : (UTC+08) BDT - Brunei Time 99 : (UTC+08) CST - China Standard Time 100 : (UTC+08) HKT - Hong Kong Time 101 : (UTC+08) IRKT - Irkutsk Time 102 : (UTC+08) MST - Malaysian Standard Time 103 : (UTC+08) PST - Philippine Standard Time 104 : (UTC+08) SST - Singapore Standard Time 105 : (UTC+09) AWDT - Australian Western Daylight Time 106 : (UTC+09) JST - Japan Standard Time 107 : (UTC+09) KST - Korea Standard Time 108 : (UTC+09) YAKT - Yakutsk Time 109 : (UTC+09:30) ACST - Australian Central Standard Time 110 : (UTC+10) AEST - Australian Eastern Standard Time 111 : (UTC+10) ChST - Chamorro Standard Time 112 : (UTC+10) VLAT - Vladivostok Time 113 : (UTC+10:30) ACDT - Australian Central Daylight Time 114 : (UTC+10:30) LHST - Lord Howe Standard Time 115 : (UTC+11) AEDT - Australian Eastern Daylight Time 116 : (UTC+11) MAGT - Magadan Time 117 : (UTC+11) SBT - Solomon Islands Time 118 : (UTC+11:30) NFT - Norfolk Time[1] 119 : (UTC+12) FJT - Fiji Time 120 : (UTC+12) GILT - Gilbert Island Time 121 : (UTC+12) PETT - Kamchatka Time 122 : (UTC+12:45) CHAST - Chatham Standard Time 123 : (UTC+13) PHOT - Phoenix Island Time 124 : (UTC+14) LINT - Line Islands Time | |||||||||||||
| SofdmSMRcvTargetLvl | 1.3.6.1.4.1.161.19.3.1.1.90 | INTEGER (-80..-40) | RW | ||||||||||
scalar · INTEGER (-80..-40) · read-write · current Desired SM Receive Level at AP (dBm, Range -40dBm to -80 dBm). As of release 12.1, on MIMO systems this is a combined power level value.
| |||||||||||||
| SradiusPort | 1.3.6.1.4.1.161.19.3.1.1.91 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Port used to connect to the RADIUS server. Default is 1812. | |||||||||||||
| SradiusAcctPort | 1.3.6.1.4.1.161.19.3.1.1.92 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Port used to for RADIUS Accounting. Default is 1813. | |||||||||||||
| SlastSesStatsReset | 1.3.6.1.4.1.161.19.3.1.1.93 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Displays the timestamp of last reset of session stats or None otherwise. | |||||||||||||
| SresetSesStats | 1.3.6.1.4.1.161.19.3.1.1.94 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Resets the session stats if true.
| |||||||||||||
| SrfOLTrap | 1.3.6.1.4.1.161.19.3.1.1.95 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable SNMP Trap for when RF Overload exceeds configured Threshold level.
| |||||||||||||
| SrfOLThreshold | 1.3.6.1.4.1.161.19.3.1.1.96 | INTEGER (1..100) | RW | ||||||||||
scalar · INTEGER (1..100) · read-write · current Percent of packet overload in the RF Downlink where SNMP is generated and sent to Network Manager.
| |||||||||||||
| SrfOLEnable | 1.3.6.1.4.1.161.19.3.1.1.97 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable Throughput RF Overload Monitoring monitoring.
| |||||||||||||
| SactionListFilename | 1.3.6.1.4.1.161.19.3.1.1.98 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Name of the file that contains the Action List for Auto update commands from CNUT | |||||||||||||
| SenableAutoupdate | 1.3.6.1.4.1.161.19.3.1.1.99 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables/Disables auto-update of the SM's under an AP
| |||||||||||||
| SaccountingSmReAuthInterval | 1.3.6.1.4.1.161.19.3.1.1.100 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Select Interval for Reauthentication of SM | |||||||||||||
| SsyslogDomainNameAppend | 1.3.6.1.4.1.161.19.3.1.1.101 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated This attribute is deprecated. Use syslogDomainNameAppend in whispBoxAttributesGroup
| |||||||||||||
| SsyslogServerAddr | 1.3.6.1.4.1.161.19.3.1.1.102 | DisplayString | RW | deprecated | |||||||||
scalar · DisplayString · read-write · deprecated This attribute is deprecated. Use syslogServerAddr in whispBoxAttributesGroup | |||||||||||||
| SsyslogServerPort | 1.3.6.1.4.1.161.19.3.1.1.103 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated This attribute is deprecated. Use syslogServerPort in whispBoxAttributesGroup | |||||||||||||
| SsyslogXmitAP | 1.3.6.1.4.1.161.19.3.1.1.104 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables/Disables transmission of Syslogs from AP/BHM
| |||||||||||||
| SsyslogXmitSMs | 1.3.6.1.4.1.161.19.3.1.1.105 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables/Disables transmission of Syslogs from connected SMs/BHS. This can be over-ridden by the setting on individual SMs/ the BHS.
| |||||||||||||
| SaccountingInterimUpdateInterval | 1.3.6.1.4.1.161.19.3.1.1.106 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Select Interval for Interim Updates | |||||||||||||
| SgpsOutputEn | 1.3.6.1.4.1.161.19.3.1.1.107 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated Controls sync config for AUX port. On 450b SM/BHS and all AP/BHM's except for 450b BHM, there are two options: 0 disabled and 1 output. On 450b disabled allows alignment tone to output to the AUX port and on all AP/BHM's except for 450b BHM disabled allows sync input from AUX port. On both output allows the sync output to the AUX port. On 450b BHM, there are three options: 0 disable, 1 output, and 2 input. Disabled allows alignment tone output to the AUX port, output allows sync output to the AUX port, and input allows sync input from AUX port. Deprecated in 16.1 - Use corresponding OID in whipsBoxConfig MIB.
| |||||||||||||
| SremoveIdleSMs | 1.3.6.1.4.1.161.19.3.1.1.108 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting this to a value 1 will remove all SMs which are in Idle state from AP's Session list.
| |||||||||||||
| SlastTimeIdleSMsRemoved | 1.3.6.1.4.1.161.19.3.1.1.109 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Displays the timestamp of last removal of Idle SMs from AP's Session list | |||||||||||||
| SuserAuthSharedSecret1 | 1.3.6.1.4.1.161.19.3.1.1.110 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current User Authentication Server 1 Shared Secret. | |||||||||||||
| SuserAuthSharedSecret2 | 1.3.6.1.4.1.161.19.3.1.1.111 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current User Authentication Server 2 Shared Secret. | |||||||||||||
| SuserAuthSharedSecret3 | 1.3.6.1.4.1.161.19.3.1.1.112 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current User Authentication Server 3 Shared Secret. | |||||||||||||
| StrapDelayAfterBootup | 1.3.6.1.4.1.161.19.3.1.1.113 | INTEGER (0..120) | RW | ||||||||||
scalar · INTEGER (0..120) · read-write · current Delays sending of SNMP traps after radio boots up for this many number of seconds.
| |||||||||||||
| SsessionActions | 1.3.6.1.4.1.161.19.3.1.1.114 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current 0: Drop all the sessions from AP. 1: Remove last known primary AP from all SMs/BHS which are in Registered state and also drop sessions.
| |||||||||||||
| SconfigAction | 1.3.6.1.4.1.161.19.3.1.1.116 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Applicable after 16.1 onwards, AP/BHM now no longer required reboot when frequency and channel bandwidth settings are change and radio start transmitting on new frequency. Using this OID you can control configuring new value and when the setting should be applied. 0 - Instant, Radio will start transmitting on new configuration.(default) 1 - Delayed, Radio will save the new configuration but will wait to transmit. 2 - Apply changes, Radio will start transmitting on new configuration.
| |||||||||||||
| SradioMode | 1.3.6.1.4.1.161.19.3.1.1.206 | INTEGER | RW | obsolete | |||||||||
scalar · INTEGER · read-write · obsolete This OID is obsolete.
| |||||||||||||
| SrfTelnetAccess | 1.3.6.1.4.1.161.19.3.1.1.207 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Allows/prohibits uplink Telnet access (SM->AP).
| |||||||||||||
| SupLnkMaxBurstDataRate | 1.3.6.1.4.1.161.19.3.1.1.208 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Maximum burst uplink rate.
| |||||||||||||
| SdwnLnkMaxBurstDataRate | 1.3.6.1.4.1.161.19.3.1.1.209 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Maximum burst downlink rate.
| |||||||||||||
| SrfPPPoEPADIForwarding | 1.3.6.1.4.1.161.19.3.1.1.210 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables/disables forwarding of PPPoE PADI packets from AP to SM.
| |||||||||||||
| SallowedIPAccessNMLength1 | 1.3.6.1.4.1.161.19.3.1.1.211 | INTEGER (1..32) | RW | ||||||||||
scalar · INTEGER (1..32) · read-write · current Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed | |||||||||||||
| SallowedIPAccessNMLength2 | 1.3.6.1.4.1.161.19.3.1.1.212 | INTEGER (1..32) | RW | ||||||||||
scalar · INTEGER (1..32) · read-write · current Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed | |||||||||||||
| SallowedIPAccessNMLength3 | 1.3.6.1.4.1.161.19.3.1.1.213 | INTEGER (1..32) | RW | ||||||||||
scalar · INTEGER (1..32) · read-write · current Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed | |||||||||||||
| SbridgeFloodUnknownsEnable | 1.3.6.1.4.1.161.19.3.1.1.214 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Forward unicast packets with an unknown address to all SMs. This can significantly reduce downlink throughput. (0) - Drop unknown unicast packets. (1) - Forward unknown unicast packets to all SMs.
| |||||||||||||
| SberModSelect | 1.3.6.1.4.1.161.19.3.1.1.215 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The BER modulation configured at the AP. 0 for QPSK, 1 for 16-QAM, 2 for 64-QAM, 3 for 256-QAM, 4 for 8-QAM, 5 for 32-QAM, 6 for 128-QAM. Engineering use only.
| |||||||||||||
| SremoteSpectrumAnalyzerScanBandwidth | 1.3.6.1.4.1.161.19.3.1.1.216 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Scanning Bandwidth used for the Remote Spectrum Analyzer. As of 22.0, this also changes the AP's channel bandwidth for a Spectrum Analysis in all other platforms except 450m.
| |||||||||||||
| SmulticastVCDataRate | 1.3.6.1.4.1.161.19.3.1.1.217 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables and selects the data rate of the Multicast VC. If disabled, multicast messages are sent using the broadcast VC. This VC does not automatically rate adapt. Note: SMs that cannot receive at the selected rate will receive no multicast messages. For PMP AP only.
| |||||||||||||
| SdlnkMcastCIR | 1.3.6.1.4.1.161.19.3.1.1.218 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Downlink Multicast CIR (kbps). Can only be set if Multicast VC is enabled. For PMP AP only. | |||||||||||||
| SmulticastRetryCount | 1.3.6.1.4.1.161.19.3.1.1.219 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Multicast Repeat Count : Range 0 - 2. Can only be set if Multicast VC is enabled. For PMP AP only. | |||||||||||||
| SapConfigAdjacentChanSupport | 1.3.6.1.4.1.161.19.3.1.1.220 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Used to enable or disable adjacent channel support. This could be needed when there is no guard band between co-located APs. Only available for APs in 3 GHz, 4.9 GHz and all 5 GHz frequency bands. For 3 GHz, this caps SMs to max transmit power of 23 dBm. When disabled, allows 3 GHz SMs to max out transmit power at 25 dBm. For 4.9-5.9 GHz, this caps 450b SMs to max transmit power of 25 dBm. When disabled, allows 4.9-5.9 GHz 450b SMs to max out transmit power at 27 dBm.
| |||||||||||||
| Spmp430InteropMode | 1.3.6.1.4.1.161.19.3.1.1.221 | INTEGER | RO | obsolete | |||||||||
scalar · INTEGER · read-only · obsolete When the AP talks to a PMP 430 it can do so in either MIMO-A or SISO mode. 0 = MIMO-A 1 = SISO Only applies to PMP 450 AP at 5 GHz. By default in 13.2 the AP talks in MIMO-A to PMP 430 SISO SMs. Setting this to a 1 will enable SISO mode to PMP 430 SISO SMs, as it was in 13.1.3 and before. As of 16.1, PMP 430 SMs are no longer supported on the 450 platform. On that release and forward, this OID is read-only and returns MIMO-A.
| |||||||||||||
| SframePeriod | 1.3.6.1.4.1.161.19.3.1.1.223 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Changes frame period to 2.5 ms or 5ms. Note: If set to 5 ms, only SM/BHS from 13.3 and onward will be able to register. Only on PMP and PTP 450. Not available in all regions.
| |||||||||||||
| SenableRadiusDynAuth | 1.3.6.1.4.1.161.19.3.1.1.224 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This option can be used to enable Radius Dynamic Authorization Extensions.Both CoA, which change the SM config parameters from the Radius server while an SM is already in session and Disconnect Message are supported. This option will only be used if Authentication mode is set to Radius AAA. 0 - Disable Radius Dynamic Authorization Extension. 1 - Enable Radius Dynamic Authorization Extension.
| |||||||||||||
| Spmp430SMRegistration | 1.3.6.1.4.1.161.19.3.1.1.225 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Option to allow/disallow PMP 430 SMs to register to this AP. When disabled PMP 430 SMs registrations will be rejected. As of 16.1, PMP 430 SMs are no longer supported on the 450 platform. On that release and forward, this OID is read-only and returns deny.
| |||||||||||||
| SdisableAuthForICCSM | 1.3.6.1.4.1.161.19.3.1.1.226 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Bypass Authentication for ICC SMs
| |||||||||||||
| SenableEuSecurityCheck | 1.3.6.1.4.1.161.19.3.1.1.227 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable EU Security compliance check
| |||||||||||||
| SonlyAllowPMP450iSMRegistration | 1.3.6.1.4.1.161.19.3.1.1.228 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Option to limit SM registration to only allow PMP 450i and newer devices or allow all devices (450 and newer) to register. Setting this to only 450i or newer will force an Auth Fail registration failure when a PMP 450 SM device tries to register. This option only applies to PMP 450i or newer AP devices.
| |||||||||||||
| Spmp450430LegacyMode | 1.3.6.1.4.1.161.19.3.1.1.229 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Option to put the PMP 450b/450i/450m into a Legacy mode for communicating with PMP 450 SMs running SW older than 13.3 and PMP 430 SMs running SW older than 13.4.1. Enabling this option will have an impact on sector throughput performance so should only be enabled to allow upgrading of the mixed sector. 450m will operate in SU-MIMO Mode. As of 16.1, PMP 430 SMs are no longer supported on the 450 platform. On that release and forward, this OID is read-only and returns disabled.
| |||||||||||||
| SpagerRejectFilterSelect | 1.3.6.1.4.1.161.19.3.1.1.230 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable or disable the Pager filter which can filter out Pager signals interfering in the 900 MHz band. NOTE: Frequencies 920 MHz and above will not work when enabled. Only applicable to 900 MHz devices.
| |||||||||||||
| SfreeRunGPSSyncBypass | 1.3.6.1.4.1.161.19.3.1.1.231 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable to allow Free Run to begin immediately after radio bootup. Normally, Free Run is only allowed after GPS sync has been established at least once, then lost.
| |||||||||||||
| SuseAPManagementVIDForICCSM | 1.3.6.1.4.1.161.19.3.1.1.232 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current When enabled, SM connected via ICC uses APs MVID instead of its own.
| |||||||||||||
| SframeAlignmentLegacyMode | 1.3.6.1.4.1.161.19.3.1.1.233 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated Option to adjust the frame alignment for compatibility with different GPS sync sources and software versions. Please see user guide for more information. Not applicable to 3 GHz radios running with 5ms frame, nor PMP 450m. As of 22.1 this OID is deprecated and only supports alignment with software release 16.X and later.
| |||||||||||||
| SnoRebootFreqChange | 1.3.6.1.4.1.161.19.3.1.1.234 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable option to change frequency without rebooting. Engineering use only.
| |||||||||||||
| SmumimoTrialMode | 1.3.6.1.4.1.161.19.3.1.1.236 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable MU-MIMO Trial, Trial Mode units will decrement until units are exhausted or Trial Mode is disabled. Disable MU-MIMO Trial, radio is still functional with SU-MIMO operation. Trial Mode units will not decrement. 450m only.
| |||||||||||||
| SweightedWindowInterval | 1.3.6.1.4.1.161.19.3.1.1.237 | INTEGER (1..127) | RW | ||||||||||
scalar · INTEGER (1..127) · read-write · current Weighted Window Interval for SM Prioritization and Weighted Fair Queueing. Indicates the number of TDD frames over which the SM Prioritization, WFQ, and Rate Plan will be managed. Engineering only.
| |||||||||||||
| SsmPrioritization | 1.3.6.1.4.1.161.19.3.1.1.238 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current SM Prioritization Enable/Disable. Currently not supported on PMP 450m.
| |||||||||||||
| SsmPrioritizationAllocationLow | 1.3.6.1.4.1.161.19.3.1.1.239 | INTEGER (1..100) | RW | ||||||||||
scalar · INTEGER (1..100) · read-write · current SM Prioritization Low Group allocation. Indicates the percentage of the scheduling window allocated for the SM Prioritization Low Group.
| |||||||||||||
| SsmPrioritizationAllocationHigh | 1.3.6.1.4.1.161.19.3.1.1.240 | INTEGER (0..99) | RO | ||||||||||
scalar · INTEGER (0..99) · read-only · current SM Prioritization High Group allocation. Indicates the percentage of the scheduling window allocated for the SM Prioritization High Group. This is read-only because it is derived from the SM Prioritization Low Group Rate.
| |||||||||||||
| Swfq | 1.3.6.1.4.1.161.19.3.1.1.241 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Weighted Fair Queuing Enable/Disable. Currently not supported on PMP 450m.
| |||||||||||||
| SwfqAllocationLowSMPrioritization | 1.3.6.1.4.1.161.19.3.1.1.242 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Weighted Fair Queuing Allocation for SM Prioritization Low Group. Indicates the percentage of the scheduling window allocated for the various QoS Levels for the SM Prioritization Low Group. Please enter the 5 allocations, commma separated, which correspond to the following Data Channels: (Broadcast/Multicast, Low Priority, Medium Priority, High Priority, Ultra High Priority). The sum of of the values must add up to 100. If more than 5 values are entered, only the first 5 will be considered, the rest will be discarded. It is valid to enter fewer than 5 values, in this case the values entered will be concatentated with the unchanged values, but the sum must still add up to 100. | |||||||||||||
| SwfqAllocationHighSMPrioritization | 1.3.6.1.4.1.161.19.3.1.1.243 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Weighted Fair Queuing Allocation for High SM Prioritization. Indicates the percentage of the scheduling window allocated for the various Data Channels for the SM Prioritization High Group. Please enter the 4 allocations, commma separated, which correspond to the following QoS Levels: (Low Priority, Medium Priority, High Priority, Ultra High Priority). The sum of of the values must add up to 100. If more than 4 values are entered, only the first 4 will be considered, the rest will be discarded. It is valid to enter fewer than 4 values, in this case the values entered will be concatentated with the unchanged values, but the sum must still add up to 100. | |||||||||||||
| SauthKey256Ap | 1.3.6.1.4.1.161.19.3.1.1.244 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Authentication key 256-bit. It should be up to 64 hex characters long. Can be used on MultiPoint AP if PSK Authentication mode is selected. Otherwise, it is used on Backhauls. If the AP and SM are both capable of AES-256 they will use this. | |||||||||||||
| SauthKey256OptionAP | 1.3.6.1.4.1.161.19.3.1.1.245 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This option is for Multipoint APs only. This option will only be used if Authentication Mode is set to AP Pre-Shared Key. 0 - Use default 256-bit key. 1 - Use set 256-bit key.
| |||||||||||||
| SlocalNTPServer | 1.3.6.1.4.1.161.19.3.1.1.246 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This OID determines if NTP server is enabled or not. 0: Disable NTP server 1: Enable NTP server
| |||||||||||||
| SprioritizeMgmtData | 1.3.6.1.4.1.161.19.3.1.1.247 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current 0 - Management data will use low priority VC. 1 - If high priority VC is configured will use that, otherwise will use low priority VC
| |||||||||||||
| SsmLimit | 1.3.6.1.4.1.161.19.3.1.1.248 | INTEGER (1..238) | RW | ||||||||||
scalar · INTEGER (1..238) · read-write · current SM Registration Limit. This represents the maximum number of subscribers that can register to this AP. | |||||||||||||
| SoneXEnable | 1.3.6.1.4.1.161.19.3.1.1.249 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current enable(1) or disable(0) 802.1X Authentication.
| |||||||||||||
| SoneXSharedSecret | 1.3.6.1.4.1.161.19.3.1.1.250 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current 802.1X Authentication Server Shared Secret. | |||||||||||||
| SlteFrameConfigurationOption | 1.3.6.1.4.1.161.19.3.1.1.252 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Used to determine if Co-location with LTE is being used and calculate the frame delay needed so PMP and LTE frames can align.
| |||||||||||||
| SapScheduler | 1.3.6.1.4.1.161.19.3.1.1.253 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Scheduler selection legacy or proportional or airtime fairness. Airtime Fairness scheduler is same as Proportion scheduler with fixed configuration parameters for all SMs. Proportional scheduler will be enabled for proportional and airtime fairness configuration.
| |||||||||||||
| SdefaultDownlinkPlan | 1.3.6.1.4.1.161.19.3.1.1.254 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Default downlink plan in Kbps. | |||||||||||||
| SdefaultUplinkPlan | 1.3.6.1.4.1.161.19.3.1.1.255 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Default uplink plan in Kbps | |||||||||||||
| SdhcpRelayOpt82CircuitID | 1.3.6.1.4.1.161.19.3.1.1.257 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Circuit ID for DHCP Relay Option 82 data. Supports following wildcards: $apmac$ - AP MAC address in ascii format, no delimiters $apmacbi$ - AP MAC address in hex format (6 bytes) $smmac$ - SM MAC address in ascii format, no delimiters $smmacbi$ - SM MAC address in hex format (6 bytes) $apsn$ - AP Site Name (may be truncated to 32 chars) $smsn$ - SM Site Name (may be truncated to 32 chars) $smvid$ - SM Port VID in ascii format, leading 0 included, 4 chars long $smvidbi$ - SM Port VID in hex format (2 bytes) $smluid$ - SM LUID Note that overall expanded Option 82 data is limited to 255 bytes. | |||||||||||||
| SdhcpRelayOpt82RemoteID | 1.3.6.1.4.1.161.19.3.1.1.258 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Remote ID for DHCP Relay Option 82 data. Supports following wildcards: $apmac$ - AP MAC address in ascii format, no delimiters $apmacbi$ - AP MAC address in hex format (6 bytes) $smmac$ - SM MAC address in ascii format, no delimiters $smmacbi$ - SM MAC address in hex format (6 bytes) $apsn$ - AP Site Name (may be truncated to 32 chars) $smsn$ - SM Site Name (may be truncated to 32 chars) $smvid$ - SM Port VID in ascii format, leading 0 included, 4 chars long $smvidbi$ - SM Port VID in hex format (2 bytes) $smluid$ - SM LUID Note that overall expanded Option 82 data is limited to 255 bytes. | |||||||||||||
| SdhcpRelayOpt82VendorSpecificID | 1.3.6.1.4.1.161.19.3.1.1.259 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Vendor Specific ID for DHCP Relay Option 82 data. Supports following wildcards: $apmac$ - AP MAC address in ascii format, no delimiters $apmacbi$ - AP MAC address in hex format (6 bytes) $smmac$ - SM MAC address in ascii format, no delimiters $smmacbi$ - SM MAC address in hex format (6 bytes) $apsn$ - AP Site Name (may be truncated to 32 chars) $smsn$ - SM Site Name (may be truncated to 32 chars) $smvid$ - SM Port VID in ascii format, leading 0 included, 4 chars long $smvidbi$ - SM Port VID in hex format (2 bytes) $smluid$ - SM LUID Note that overall expanded Option 82 data is limited to 255 bytes. | |||||||||||||
| SautoContention | 1.3.6.1.4.1.161.19.3.1.1.260 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable Auto Contention. Currently not supported on PMP 450m.
| |||||||||||||
| SlqiMetric | 1.3.6.1.4.1.161.19.3.1.1.261 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Metric used for LQI
| |||||||||||||
| SlqiTrapsEnable | 1.3.6.1.4.1.161.19.3.1.1.262 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable or Disable LQI Traps.
| |||||||||||||
| SlqiRaiseTrapThreshold | 1.3.6.1.4.1.161.19.3.1.1.263 | INTEGER (1..99) | RW | ||||||||||
scalar · INTEGER (1..99) · read-write · current Minimum tolerable decreasing LQI level. Trap will be raised when delta from reference LQI falls below this level. | |||||||||||||
| SlqiClearTrapThreshold | 1.3.6.1.4.1.161.19.3.1.1.264 | INTEGER (1..99) | RW | ||||||||||
scalar · INTEGER (1..99) · read-write · current Minimum tolerable increasing LQI level. Trap will be cleared when delta from reference LQI raises above this level. | |||||||||||||
| SlqiTrapsObservePeriod | 1.3.6.1.4.1.161.19.3.1.1.265 | INTEGER (1..15) | RW | ||||||||||
scalar · INTEGER (1..15) · read-write · current Minimum observation period in minutes before traps are raised or cleared. | |||||||||||||
| SotarInterval | 1.3.6.1.4.1.161.19.3.1.1.266 | INTEGER (0..1440) | RW | ||||||||||
scalar · INTEGER (0..1440) · read-write · current Over The Air Rekey Interval : 60 -- 1440 Minutes, 0 for disabling the feature. Available only if feature key is applied.
| |||||||||||||
| SsystemTimeSet | 1.3.6.1.4.1.161.19.3.1.1.267 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The radio's System Time can be set via NTP, GPS, cnMaestro or manually. This OID controls what sources allow the radio's System Time to be set. 0 = Allow GPS to set System Time (default) 1 = Do not allow GPS to set System Time. This can be helpful for certain GPS chips that occasionally give incorrect date and/or time. When running CBRS, this OID is read-only to not allow GPS to set the time and will need to be set via NTP.
| |||||||||||||
| SbhsTxPowerControl | 1.3.6.1.4.1.161.19.3.1.1.268 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Disable/Enable on BHM to control BHS Tx power remotely.
| |||||||||||||
| SautoUpdateFileServer | 1.3.6.1.4.1.161.19.3.1.1.269 | INTEGER | RW | obsolete | |||||||||
scalar · INTEGER · read-write · obsolete Added in 16.2.1 to allow 450 APs to host 450i and 450b images for AutoUpdate. Obsolete in 20.0 whereas this is no longer possible. As a work-around, use CNUT as a File Server, or use cnMaestro to upgrade.
| |||||||||||||
| SpaHighbandSwitchoverFrequency | 1.3.6.1.4.1.161.19.3.1.1.270 | INTEGER (3302500..4197500) | RW | ||||||||||
scalar · INTEGER (3302500..4197500) · read-write · current Power Amplifier high band switch over frequency point. 450m only Engineering use only | |||||||||||||
| SrfHighbandSwitchoverFrequency | 1.3.6.1.4.1.161.19.3.1.1.271 | INTEGER (3302500..4197500) | RW | ||||||||||
scalar · INTEGER (3302500..4197500) · read-write · current RF high band switch over frequency point. 450m only Engineering use only | |||||||||||||
| SreconnectReportEnable | 1.3.6.1.4.1.161.19.3.1.1.272 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable(1)/Disable(0) SM reconnection failure report after channel change or EIRP change. PMP only.
| |||||||||||||
| SfailureReportingThreshold | 1.3.6.1.4.1.161.19.3.1.1.273 | INTEGER (0..100) | RW | ||||||||||
scalar · INTEGER (0..100) · read-write · current Failure reporting threshold percentage. If the percentage of number of SMs which failed to reconnect after EIRP/channel change exceeds this value, failure will be reported (default is 10%). PMP only. | |||||||||||||
| SreconnectReportDuration | 1.3.6.1.4.1.161.19.3.1.1.274 | INTEGER (1..30) | RW | ||||||||||
scalar · INTEGER (1..30) · read-write · current Stop reporting reconnection failure after configured duration, default is 7 days. PMP only. | |||||||||||||
| SbhsRcvTargetLvl | 1.3.6.1.4.1.161.19.3.1.1.275 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Desired receive power level at BHM in dBm. bhsTxPowerControl must be enabled on the BHM for this level to be targetted. | |||||||||||||
| SspeedTestServer1 | 1.3.6.1.4.1.161.19.3.1.1.276 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Set the speed test server IPv4 IP. The traffic to this server gets elevated to high prioritization. This is designed to help get improved results for a speed test server while other traffic is on the sector. Setting 0.0.0.0 disables this feature. | |||||||||||||
| SotherFrameConfigurationOption | 1.3.6.1.4.1.161.19.3.1.1.277 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Used to determine if Co-location with LTE or 5G-NR is being used and calculate the frame delay needed so PMP and LTE or 5G frames can align. Available on 3 GHz PMP AP radios only and reboot required.
| |||||||||||||
| SlteSFrameConfiguration | 1.3.6.1.4.1.161.19.3.1.1.278 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The Special Frame type used on the LTE device to be co-located with. Applicable only if otherFrameConfigurationOption is set to one of the LTE options.
| |||||||||||||
| SlteCyclicPrefix | 1.3.6.1.4.1.161.19.3.1.1.279 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The downlink and uplink cyclic prefix used on the LTE device to be co-located with. Applicable only if otherFrameConfigurationOption is set to one of the LTE options.
| |||||||||||||
| SguardSymbols5GNR | 1.3.6.1.4.1.161.19.3.1.1.280 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The guard symbols on the 5G-NR device to be co-located with. Applicable only if otherFrameConfigurationOption is set to 5G-NR option.
| |||||||||||||
| SinterferenceCancellationTrialMode | 1.3.6.1.4.1.161.19.3.1.1.281 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable Interference Cancellation Trial, Trial Mode units will decrement until units are exhausted or Trial Mode is disabled. Disable Interference Cancellation Trial, radio is still functional with UL MU-MIMO operation. Trial Mode units will not decrement. 450m only.
| |||||||||||||
| SinterferenceCancellation | 1.3.6.1.4.1.161.19.3.1.1.282 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Note that if Interference Cancellation is enabled then UL MU-MIMO operation is disabled. 450m only.
| |||||||||||||
| SdomainProxyTimeSynch | 1.3.6.1.4.1.161.19.3.1.1.283 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables device to automatically use the Domain Proxy time in CBRS mode if the local time gets out of sync.
| |||||||||||||
| SradiusVendorID | 1.3.6.1.4.1.161.19.3.1.1.284 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current (0) - Supports Legacy Vendor Id (161). (1) - Supports Cambium Vendor ID (17713).
| |||||||||||||
| Slimit450bSMMaxTxPowerEnable | 1.3.6.1.4.1.161.19.3.1.1.285 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable AP control of 450b SM Max Tx power.
| |||||||||||||
| Slimit450bSMMaxTxPowerValue | 1.3.6.1.4.1.161.19.3.1.1.286 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Value of AP Controlled 450b SM Max Tx Power. | |||||||||||||
| NwhispApsLink | 1.3.6.1.4.1.161.19.3.1.2 | ||||||||||||
| NwhispApsLinkTestConfig | 1.3.6.1.4.1.161.19.3.1.2.1 | ||||||||||||
| SlinkTestLUID | 1.3.6.1.4.1.161.19.3.1.2.1.1 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated LUID selection for Link Test. Valid range: 2-255. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SlinkTestDuration | 1.3.6.1.4.1.161.19.3.1.2.1.2 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated Duration for the Link Test. Valid range: 2-10 seconds. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SlinkTestAction | 1.3.6.1.4.1.161.19.3.1.2.1.3 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated Setting value 1 will initiate link test. Note that trying to set 0 will not stop the test. In fact it will return an error message. The value of 0 just indicates the idle state meaning no test is running or the current test is done. That's why the word stopped is used and not the action verb stop. [This variable is deprecated, please refer whispBoxLink OIDs]
| |||||||||||||
| SlinkTestPktLength | 1.3.6.1.4.1.161.19.3.1.2.1.4 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated Packet length for Link Test. Valid range: 64-1714 bytes. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SlinkTestMode | 1.3.6.1.4.1.161.19.3.1.2.1.5 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated Link Test Mode 0 = Link Test without Bridging 1 = Link Test with Bridging 2 = Link Test with Bridging and MIR 3 = Extrapolated Link Test (send only a few packets measuring their quality and extrapolate out the throughput) This is an estimation of the throughput based upon the modulation, efficiency, and data slots available. It intended to provide a basic link test test without impacting service for the sector. Extrapolated Link Test is not available for FSK radios. 4 = Link Test with Multiple LUIDs (traffic sent to all registered VCs, or specified VCs) - 450m only [This Variable is deprecated. Please refer whispBoxLink OIDs]
| |||||||||||||
| SlinkTestSNRCalculation | 1.3.6.1.4.1.161.19.3.1.2.1.6 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated Enable or disable Signal to Noise Ratio (SNR) calculations during a Link Test. Enabling(1) will calulate SNR on all receiving packets. Due to load on CPU, will slightly degrade packet per second capabilities. Only applicable to GenII OFDM products and up. [This Variable is deprecated. Please refer whispBoxLink OIDs]
| |||||||||||||
| SlinkTestWithDualPath | 1.3.6.1.4.1.161.19.3.1.2.1.7 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated Link Test with: 0 = Low Priority Data Channel only 1 = High and Low Priority Data Channels [This variable is deprecated. Please refer whispBoxLink OIDs]
| |||||||||||||
| SlinkTestNumPkt | 1.3.6.1.4.1.161.19.3.1.2.1.8 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated Number of packets to send. Valid range: 0-512 where 0 will flood the link for the duration of the test. [This variable is deprecated. Please refer whispBoxLink OIDs] | |||||||||||||
| SlinkTestForceModulation | 1.3.6.1.4.1.161.19.3.1.2.1.9 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated Engineering use only. Link Test with: 0 = Normal Rate Adapt algorithm 1 = Force to max modultion - No Rate Adapt Algorithm [This variable is deprecated. Please refer whispBoxLink OIDs]
| |||||||||||||
| SlinkTestDirection | 1.3.6.1.4.1.161.19.3.1.2.1.10 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated Link Test Direction - Engineering Use Only 0 = default (will do bidirectional) 1 = Uplink Only 2 = Downlink Only 3 = Bi-Directional (same as 0, setting to 3 will result in setting it to 0) [This variable is deprecated. Please refer whispBoxLink OIDs]
| |||||||||||||
| NwhispApsLinkTestResult | 1.3.6.1.4.1.161.19.3.1.2.2 | ||||||||||||
| StestLUID | 1.3.6.1.4.1.161.19.3.1.2.2.1 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated LUID number of selected unit. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SlinkTestStatus | 1.3.6.1.4.1.161.19.3.1.2.2.2 | DisplayString | RO | deprecated | |||||||||
scalar · DisplayString · read-only · deprecated Status for Link Test.[This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SlinkTestError | 1.3.6.1.4.1.161.19.3.1.2.2.3 | DisplayString | RO | deprecated | |||||||||
scalar · DisplayString · read-only · deprecated Error status of Link Test: (1) Failed to recieve handshake from remote device (2) No session with selected LUID. Please try again after session established. (3) Received a bad transaction ID. Please try again. (4) We werent able to send the test request to the remote device. (5) We didnt receive any results from the remote device. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| StestDuration | 1.3.6.1.4.1.161.19.3.1.2.2.4 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Duration of link test.[This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SdownLinkRate | 1.3.6.1.4.1.161.19.3.1.2.2.5 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Downlink Rate This result includes RF retransmissions. For more accurate result see downLinkRateBox. [This variable is deprecated, please refer whispBoxLink OIDs]
| |||||||||||||
| SupLinkRate | 1.3.6.1.4.1.161.19.3.1.2.2.6 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Uplink Rate. This result includes RF retransmissions. For more accurate result see upLinkRateBox. [This variable is deprecated, please refer whispBoxLink OIDs]
| |||||||||||||
| SdownLinkEff | 1.3.6.1.4.1.161.19.3.1.2.2.7 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Downlink Efficiency.
| |||||||||||||
| SmaxDwnLinkIndex | 1.3.6.1.4.1.161.19.3.1.2.2.8 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated For link test results, the maximum possible downlink efficiency percentage (always 100%).[This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SactDwnLinkIndex | 1.3.6.1.4.1.161.19.3.1.2.2.9 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Actual downlink index.[This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SexpDwnFragCount | 1.3.6.1.4.1.161.19.3.1.2.2.10 | Gauge32 | RO | deprecated | |||||||||
scalar · Gauge32 · read-only · deprecated Expected Fragment Count.[This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SactDwnFragCount | 1.3.6.1.4.1.161.19.3.1.2.2.11 | Gauge32 | RO | deprecated | |||||||||
scalar · Gauge32 · read-only · deprecated Actual Fragment Count.[This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SupLinkEff | 1.3.6.1.4.1.161.19.3.1.2.2.12 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Uplink efficiency.[This variable is deprecated, please refer whispBoxLink OIDs]
| |||||||||||||
| SexpUpFragCount | 1.3.6.1.4.1.161.19.3.1.2.2.13 | Gauge32 | RO | deprecated | |||||||||
scalar · Gauge32 · read-only · deprecated Uplink expected Fragment Count.[This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SactUpFragCount | 1.3.6.1.4.1.161.19.3.1.2.2.14 | Gauge32 | RO | deprecated | |||||||||
scalar · Gauge32 · read-only · deprecated Actual uplink Fragment Count.[This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SmaxUpLinkIndex | 1.3.6.1.4.1.161.19.3.1.2.2.15 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated For link test results, the maximum possible uplink efficiency percentage (always 100%).[This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SactUpLinkIndex | 1.3.6.1.4.1.161.19.3.1.2.2.16 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Actual Uplink index.[This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| Sfragments1xDwnLinkVertical | 1.3.6.1.4.1.161.19.3.1.2.2.17 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Number of fragments received on downlink at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| Sfragments2xDwnLinkVertical | 1.3.6.1.4.1.161.19.3.1.2.2.18 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Number of fragments received on downlink at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| Sfragments3xDwnLinkVertical | 1.3.6.1.4.1.161.19.3.1.2.2.19 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Number of fragments received on downlink at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| Sfragments4xDwnLinkVertical | 1.3.6.1.4.1.161.19.3.1.2.2.20 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Number of fragments received on downlink at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| Sfragments1xUpLinkVertical | 1.3.6.1.4.1.161.19.3.1.2.2.21 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Number of fragments received on uplink at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| Sfragments2xUpLinkVertical | 1.3.6.1.4.1.161.19.3.1.2.2.22 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Number of fragments received on uplink at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| Sfragments3xUpLinkVertical | 1.3.6.1.4.1.161.19.3.1.2.2.23 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Number of fragments received on uplink at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| Sfragments4xUpLinkVertical | 1.3.6.1.4.1.161.19.3.1.2.2.24 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Number of fragments received on uplink at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SbitErrorsCorrected1xDwnLinkVertical | 1.3.6.1.4.1.161.19.3.1.2.2.25 | DisplayString | RO | deprecated | |||||||||
scalar · DisplayString · read-only · deprecated Number of bit errors corrected on average per fragment on downlink at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SbitErrorsCorrected2xDwnLinkVertical | 1.3.6.1.4.1.161.19.3.1.2.2.26 | DisplayString | RO | deprecated | |||||||||
scalar · DisplayString · read-only · deprecated Number of bit errors corrected on average per fragment on downlink at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SbitErrorsCorrected3xDwnLinkVertical | 1.3.6.1.4.1.161.19.3.1.2.2.27 | DisplayString | RO | deprecated | |||||||||
scalar · DisplayString · read-only · deprecated Number of bit errors corrected on average per fragment on downlink at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SbitErrorsCorrected4xDwnLinkVertical | 1.3.6.1.4.1.161.19.3.1.2.2.28 | DisplayString | RO | deprecated | |||||||||
scalar · DisplayString · read-only · deprecated Number of bit errors corrected on average per fragment on downlink at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SbitErrorsCorrected1xUpLinkVertical | 1.3.6.1.4.1.161.19.3.1.2.2.29 | DisplayString | RO | deprecated | |||||||||
scalar · DisplayString · read-only · deprecated Number of bit errors corrected on average per fragment on uplink at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SbitErrorsCorrected2xUpLinkVertical | 1.3.6.1.4.1.161.19.3.1.2.2.30 | DisplayString | RO | deprecated | |||||||||
scalar · DisplayString · read-only · deprecated Number of bit errors corrected on average per fragment on uplink at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SbitErrorsCorrected3xUpLinkVertical | 1.3.6.1.4.1.161.19.3.1.2.2.31 | DisplayString | RO | deprecated | |||||||||
scalar · DisplayString · read-only · deprecated Number of bit errors corrected on average per fragment on uplink at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SbitErrorsCorrected4xUpLinkVertical | 1.3.6.1.4.1.161.19.3.1.2.2.32 | DisplayString | RO | deprecated | |||||||||
scalar · DisplayString · read-only · deprecated Number of bit errors corrected on average per fragment on uplink at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SsignalToNoiseRatioDownLinkVertical | 1.3.6.1.4.1.161.19.3.1.2.2.33 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Estimated Signal to Noise Ratio in dB for the downlink. For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SsignalToNoiseRatioUpLinkVertical | 1.3.6.1.4.1.161.19.3.1.2.2.34 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Estimated Signal to Noise Ratio in dB for the uplink. For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| Sfragments1xDwnLinkHorizontal | 1.3.6.1.4.1.161.19.3.1.2.2.35 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Number of fragments received on downlink at 1X (QPSK). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| Sfragments2xDwnLinkHorizontal | 1.3.6.1.4.1.161.19.3.1.2.2.36 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Number of fragments received on downlink at 2X (16-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| Sfragments3xDwnLinkHorizontal | 1.3.6.1.4.1.161.19.3.1.2.2.37 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Number of fragments received on downlink at 3X (64-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| Sfragments4xDwnLinkHorizontal | 1.3.6.1.4.1.161.19.3.1.2.2.38 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Number of fragments received on downlink at 4X (256-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| Sfragments1xUpLinkHorizontal | 1.3.6.1.4.1.161.19.3.1.2.2.39 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Number of fragments received on uplink at 1X (QPSK). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| Sfragments2xUpLinkHorizontal | 1.3.6.1.4.1.161.19.3.1.2.2.40 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Number of fragments received on uplink at 2X (16-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| Sfragments3xUpLinkHorizontal | 1.3.6.1.4.1.161.19.3.1.2.2.41 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Number of fragments received on uplink at 3X (64-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| Sfragments4xUpLinkHorizontal | 1.3.6.1.4.1.161.19.3.1.2.2.42 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Number of fragments received on uplink at 4X (256-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SbitErrorsCorrected1xDwnLinkHorizontal | 1.3.6.1.4.1.161.19.3.1.2.2.43 | DisplayString | RO | deprecated | |||||||||
scalar · DisplayString · read-only · deprecated Number of bit errors corrected on average per fragment on downlink at 1X (QPSK). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SbitErrorsCorrected2xDwnLinkHorizontal | 1.3.6.1.4.1.161.19.3.1.2.2.44 | DisplayString | RO | deprecated | |||||||||
scalar · DisplayString · read-only · deprecated Number of bit errors corrected on average per fragment on downlink at 2X (16-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SbitErrorsCorrected3xDwnLinkHorizontal | 1.3.6.1.4.1.161.19.3.1.2.2.45 | DisplayString | RO | deprecated | |||||||||
scalar · DisplayString · read-only · deprecated Number of bit errors corrected on average per fragment on downlink at 3X (64-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SbitErrorsCorrected4xDwnLinkHorizontal | 1.3.6.1.4.1.161.19.3.1.2.2.46 | DisplayString | RO | deprecated | |||||||||
scalar · DisplayString · read-only · deprecated Number of bit errors corrected on average per fragment on downlink at 4X (256-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SbitErrorsCorrected1xUpLinkHorizontal | 1.3.6.1.4.1.161.19.3.1.2.2.47 | DisplayString | RO | deprecated | |||||||||
scalar · DisplayString · read-only · deprecated Number of bit errors corrected on average per fragment on uplink at 1X (QPSK). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SbitErrorsCorrected2xUpLinkHorizontal | 1.3.6.1.4.1.161.19.3.1.2.2.48 | DisplayString | RO | deprecated | |||||||||
scalar · DisplayString · read-only · deprecated Number of bit errors corrected on average per fragment on uplink at 2X (16-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SbitErrorsCorrected3xUpLinkHorizontal | 1.3.6.1.4.1.161.19.3.1.2.2.49 | DisplayString | RO | deprecated | |||||||||
scalar · DisplayString · read-only · deprecated Engineering use only. Number of bit errors corrected on average per fragment on uplink at 3X (64-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SbitErrorsCorrected4xUpLinkHorizontal | 1.3.6.1.4.1.161.19.3.1.2.2.50 | DisplayString | RO | deprecated | |||||||||
scalar · DisplayString · read-only · deprecated Number of bit errors corrected on average per fragment on uplink at 4X (256-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SsignalToNoiseRatioDownLinkHorizontal | 1.3.6.1.4.1.161.19.3.1.2.2.51 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Estimated Signal to Noise Ratio in dB for the downlink. For MIMO and forward. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SsignalToNoiseRatioUpLinkHorizontal | 1.3.6.1.4.1.161.19.3.1.2.2.52 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Estimated Signal to Noise Ratio in dB for the uplink. For Gen II OFDM and forward. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0. [This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| SdownLinkRateExtrapolated | 1.3.6.1.4.1.161.19.3.1.2.2.53 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Extrapolated Downlink Rate from an extrapolated link test. Extrapolated Link Test sends only a few packets over the link and extrapolates this out to what would happen on a full link test. This is an estimation of the throughput based upon the modulation, efficiency, and data slots available. It intended to provide a basic link test test without impacting service for the sector. [This variable is deprecated, please refer whispBoxLink OIDs]
| |||||||||||||
| SupLinkRateExtrapolated | 1.3.6.1.4.1.161.19.3.1.2.2.54 | INTEGER | RO | deprecated | |||||||||
scalar · INTEGER · read-only · deprecated Extrapolated Uplink Rate from an extrapolated link test. Extrapolated Link Test sends only a few packets over the link and extrapolates this out to what would happen on a full link test. This is an estimation of the throughput based upon the modulation, efficiency, and data slots available. It intended to provide a basic link test test without impacting service for the sector. [This variable is deprecated, please refer whispBoxLink OIDs]
| |||||||||||||
| SwhispRegStatus | 1.3.6.1.4.1.161.19.3.1.2.4 | DisplayString | RO | obsolete | |||||||||
scalar · DisplayString · read-only · obsolete This shows the registration status of a link.[This variable is deprecated, please refer whispBoxLink OIDs] | |||||||||||||
| NwhispApsGPS | 1.3.6.1.4.1.161.19.3.1.3 | ||||||||||||
| SwhispGPSStats | 1.3.6.1.4.1.161.19.3.1.3.1 | INTEGER | RO | gpsSynchronized(1) | |||||||||
scalar · INTEGER · read-only · current This shows whether the AP is synchrinized to the GPS timer.
Example values from LibreNMS test devices
| |||||||||||||
| SgpsSyncSource | 1.3.6.1.4.1.161.19.3.1.3.2 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Source of GPS Sync Pulse. | |||||||||||||
| SgpsSyncStatus | 1.3.6.1.4.1.161.19.3.1.3.3 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Current Live value of Sync Status. | |||||||||||||
| SgpsTrackingMode | 1.3.6.1.4.1.161.19.3.1.3.4 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current GPS tracking mode. | |||||||||||||
| SgpsTime | 1.3.6.1.4.1.161.19.3.1.3.5 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current GPS time. | |||||||||||||
| SgpsDate | 1.3.6.1.4.1.161.19.3.1.3.6 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current GPS date. | |||||||||||||
| SgpsSatellitesTracked | 1.3.6.1.4.1.161.19.3.1.3.7 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Returns Current number of satellites GPS is tracking in string format. Use gpsSatellitesTrackedInt to get the value in integer | |||||||||||||
| SgpsSatellitesVisible | 1.3.6.1.4.1.161.19.3.1.3.8 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Return Number of satellites GPS is seeing in string format. Use gpsSatellitesVisibleInt to get value in integer | |||||||||||||
| SgpsHeight | 1.3.6.1.4.1.161.19.3.1.3.9 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current GPS height. | |||||||||||||
| SgpsAntennaConnection | 1.3.6.1.4.1.161.19.3.1.3.10 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Antenna Connection status. | |||||||||||||
| SgpsLatitude | 1.3.6.1.4.1.161.19.3.1.3.11 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current GPS Latitude. | |||||||||||||
| SgpsLongitude | 1.3.6.1.4.1.161.19.3.1.3.12 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current GPS Longitude. | |||||||||||||
| SgpsInvalidMsg | 1.3.6.1.4.1.161.19.3.1.3.13 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Number of invalid messages. | |||||||||||||
| SgpsRestartCount | 1.3.6.1.4.1.161.19.3.1.3.14 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of GPS unit restarts. | |||||||||||||
| SgpsReInitCount | 1.3.6.1.4.1.161.19.3.1.3.15 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current GPS ReInit counts. The number of times we have done a complete re-initialization of the GPS device. | |||||||||||||
| SgpsReceiverInfo | 1.3.6.1.4.1.161.19.3.1.3.16 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current A textual string contains information on GPS receiver. | |||||||||||||
| SgpsFreeRun | 1.3.6.1.4.1.161.19.3.1.3.17 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This variable is deprecated. Setting this value to false will set AutoSync. Setting this value to true will set AutoSync plus Free Run.
| |||||||||||||
| SautoSyncStatus | 1.3.6.1.4.1.161.19.3.1.3.18 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current Live value of Sync Status. Following values represent what sources have sync. (0) No Sync (1) On-board GPS Sync (2) Timing Port (UGPS/cnPulse) Sync (3) On-board GPS and Timing Port (UGPS/cnPulse) Sync (4) Canopy Sync Over Power Port (5) On-board GPS and Canopy Sync Over Power (6) Timing Port (UGPS/cnPulse) and Canopy Sync Over Power (7) On-board GPS, Timing Port (UGPS/cnPulse) and Canopy Sync Over Power (8) Cambium Sync Over Power/Main Port (9) On-board GPS and Cambium Sync Over Power/Main Port (10) Timing Port (UGPS/cnPulse) and Cambium Sync Over Power/Main Port (11) On-board GPS and Timing Port (UGPS/cnPulse) and Cambium Sync Over Power/Main Port When the radio is set to Generate Sync it will always return 0.
| |||||||||||||
| SgpsSatellitesTrackedInt | 1.3.6.1.4.1.161.19.3.1.3.19 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current number of satellites GPS is tracking in integer format. | |||||||||||||
| SgpsSatellitesVisibleInt | 1.3.6.1.4.1.161.19.3.1.3.20 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of satellites the GPS sees in integer format | |||||||||||||
| SppsLossCountStatus | 1.3.6.1.4.1.161.19.3.1.3.21 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current value of PPS_LOST_CNT. Engineering use only. | |||||||||||||
| SclearPPSLossCount | 1.3.6.1.4.1.161.19.3.1.3.22 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Write-Only OID, clear current value of PPS_LOST_CNT. Engineering use only. | |||||||||||||
| SppsLossPercent | 1.3.6.1.4.1.161.19.3.1.3.23 | DisplayString | RO | deprecated | |||||||||
scalar · DisplayString · read-only · deprecated Deprecated -Average Sync PPS received over largest measurement interval (15 minutes currently) See syncMetricsTable instead. | |||||||||||||
| TsyncMetricsTable | 1.3.6.1.4.1.161.19.3.1.3.24 | NA | |||||||||||
table · not-accessible · current Sync Pulse Metrics | |||||||||||||
| RsyncMetricsTableEntry | 1.3.6.1.4.1.161.19.3.1.3.24.1 | NA | |||||||||||
| CsyncMetricsTableInterval | 1.3.6.1.4.1.161.19.3.1.3.24.1.1 | INTEGER (0..2) | RO | ||||||||||
column · INTEGER (0..2) · read-only · current Sync Metrics measurement interval. 0: 1 minute 1: 5 minutes 2: 15 minutes | |||||||||||||
| CsyncMetricsTablePulseReceivedPct | 1.3.6.1.4.1.161.19.3.1.3.24.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Percentage of sync pulses received successfully during the measurement interval. This value is scaled up by 100 (i.e. 9769 is equivalent to 97.69%) | |||||||||||||
| CsyncMetricsTableSatSNRAvg | 1.3.6.1.4.1.161.19.3.1.3.24.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Average Satellite Signal-to-noise Ratio during the measurement interval. 0 may indicate no valid source of GPS data is available (from internal or timing port GPS source). This value is scaled up by 100 (i.e. 2735 is equivalent to 27.35) | |||||||||||||
| CsyncMetricsTableSatVisibleAvg | 1.3.6.1.4.1.161.19.3.1.3.24.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Average Visible Satellite count during the measurement interval. 0 may indicate no valid source of GPS data is available (from internal or timing port GPS source). This value is scaled up by 100 (i.e. 2146 is equivalent to 21.46) | |||||||||||||
| CsyncMetricsTableSatTrackedAvg | 1.3.6.1.4.1.161.19.3.1.3.24.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Average Tracked Satellite count during the measurement interval. 0 may indicate no valid source of GPS data is available (from internal or timing port GPS source). This value is scaled up by 100 (i.e. 1420 is equivalent to 14.20) | |||||||||||||
| TwhispLinkTable | 1.3.6.1.4.1.161.19.3.1.4 | NA | |||||||||||
table · not-accessible · current Link Status Table | |||||||||||||
| RwhispLinkEntry | 1.3.6.1.4.1.161.19.3.1.4.1 | NA | |||||||||||
| ClinkLUID | 1.3.6.1.4.1.161.19.3.1.4.1.1 | INTEGER (2..239) | RO | ||||||||||
column · INTEGER (2..239) · read-only · current LUID number. | |||||||||||||
| ClinkDescr | 1.3.6.1.4.1.161.19.3.1.4.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current A textual string containing information about the unit. This string should include the name of the manufacturer, the product name and the version of the hardware interface. | |||||||||||||
| ClinkPhysAddress | 1.3.6.1.4.1.161.19.3.1.4.1.3 | PhysAddress | RO | ||||||||||
column · PhysAddress · read-only · current Physical Address of the unit. | |||||||||||||
| ClinkMtu | 1.3.6.1.4.1.161.19.3.1.4.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface. | |||||||||||||
| ClinkSpeed | 1.3.6.1.4.1.161.19.3.1.4.1.5 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. | |||||||||||||
| ClinkOperStatus | 1.3.6.1.4.1.161.19.3.1.4.1.6 | INTEGER | RO | obsolete | |||||||||
column · INTEGER · read-only · obsolete This variable is not used.
| |||||||||||||
| ClinkInOctets | 1.3.6.1.4.1.161.19.3.1.4.1.7 | Counter32 | RO | deprecated | |||||||||
column · Counter32 · read-only · deprecated The total number of octets received on the interface, including framing characters. Use linkInOctets64 instead. | |||||||||||||
| ClinkInUcastPkts | 1.3.6.1.4.1.161.19.3.1.4.1.8 | Counter32 | RO | deprecated | |||||||||
column · Counter32 · read-only · deprecated The number of subnetwork-unicast packets delivered to a higher-layer protocol. Use linkInUcastPkts64 instead. | |||||||||||||
| ClinkInNUcastPkts | 1.3.6.1.4.1.161.19.3.1.4.1.9 | Counter32 | RO | deprecated | |||||||||
column · Counter32 · read-only · deprecated The number of non-unicast (i.e., subnetwork-broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. Use linkInNUcastPkts64 instead. | |||||||||||||
| ClinkInDiscards | 1.3.6.1.4.1.161.19.3.1.4.1.10 | Counter32 | RO | deprecated | |||||||||
column · Counter32 · read-only · deprecated The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Use linkInDiscards64 instead. | |||||||||||||
| ClinkInError | 1.3.6.1.4.1.161.19.3.1.4.1.11 | Counter32 | RO | deprecated | |||||||||
column · Counter32 · read-only · deprecated The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. Use linkInError64 instead. | |||||||||||||
| ClinkInUnknownProtos | 1.3.6.1.4.1.161.19.3.1.4.1.12 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. | |||||||||||||
| ClinkOutOctets | 1.3.6.1.4.1.161.19.3.1.4.1.13 | Counter32 | RO | deprecated | |||||||||
column · Counter32 · read-only · deprecated The total number of octets transmitted out of the interface, including framing characters. Use linkOutOctets64 instead. | |||||||||||||
| ClinkOutUcastPkts | 1.3.6.1.4.1.161.19.3.1.4.1.14 | Counter32 | RO | deprecated | |||||||||
column · Counter32 · read-only · deprecated The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. Use linkOutUcastPkts64 instead. | |||||||||||||
| ClinkOutNUcastPkts | 1.3.6.1.4.1.161.19.3.1.4.1.15 | Counter32 | RO | deprecated | |||||||||
column · Counter32 · read-only · deprecated The total number of packets that higher-level protocols requested be transmitted to a non-unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent. Use linkOutNUcastPkts64 instead. | |||||||||||||
| ClinkOutDiscards | 1.3.6.1.4.1.161.19.3.1.4.1.16 | Counter32 | RO | deprecated | |||||||||
column · Counter32 · read-only · deprecated The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Use linkOutDiscards64 instead | |||||||||||||
| ClinkOutError | 1.3.6.1.4.1.161.19.3.1.4.1.17 | Counter32 | RO | deprecated | |||||||||
column · Counter32 · read-only · deprecated The number of outbound packets that could not be transmitted because of errors. Use linkOutError64 instead. | |||||||||||||
| ClinkOutQLen | 1.3.6.1.4.1.161.19.3.1.4.1.18 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current Number of packets in output packet queue. | |||||||||||||
| ClinkSessState | 1.3.6.1.4.1.161.19.3.1.4.1.19 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current operational state of an interface. 0 = Idle 1 = In Session 2 = Clearing 3 = Reregistration downlink reset 4 = Authentication Challenge 5 = Registering 6 = Not in use
| |||||||||||||
| ClinkESN | 1.3.6.1.4.1.161.19.3.1.4.1.20 | PhysAddress | RO | ||||||||||
column · PhysAddress · read-only · current Link Electronic serial number. It is MAC address. | |||||||||||||
| ClinkRSSI | 1.3.6.1.4.1.161.19.3.1.4.1.21 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The average RSSI reading of all packets received from an SM. Applicable to FSK radios only. | |||||||||||||
| ClinkAveJitter | 1.3.6.1.4.1.161.19.3.1.4.1.22 | Gauge32 (0..15) | RO | ||||||||||
column · Gauge32 (0..15) · read-only · current The average Jitter reading of all packets received from an SM. Applicable to FSK radios only. | |||||||||||||
| ClinkLastJitter | 1.3.6.1.4.1.161.19.3.1.4.1.23 | Gauge32 (0..15) | RO | ||||||||||
column · Gauge32 (0..15) · read-only · current Last jitter value. Applicable to FSK radios only. | |||||||||||||
| ClinkAirDelay | 1.3.6.1.4.1.161.19.3.1.4.1.24 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The current round trip air delay in bits measured between the AP and SM. | |||||||||||||
| ClinkRegCount | 1.3.6.1.4.1.161.19.3.1.4.1.25 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The number of times an SM has registered to an AP. | |||||||||||||
| ClinkReRegCount | 1.3.6.1.4.1.161.19.3.1.4.1.26 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The number of times an SM has tried to register with the AP while it still has an active session with the AP. | |||||||||||||
| ClinkTimeOut | 1.3.6.1.4.1.161.19.3.1.4.1.27 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Link time out. | |||||||||||||
| ClinkLastRSSI | 1.3.6.1.4.1.161.19.3.1.4.1.28 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The last RSSI reading of all packets received from an SM. Applicable to FSK radios only. | |||||||||||||
| CsessionCount | 1.3.6.1.4.1.161.19.3.1.4.1.29 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current How many times has this mac been in/out of session. | |||||||||||||
| CsoftwareVersion | 1.3.6.1.4.1.161.19.3.1.4.1.30 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The software version of registered SM. | |||||||||||||
| CsoftwareBootVersion | 1.3.6.1.4.1.161.19.3.1.4.1.31 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The software boot version of registered SM. | |||||||||||||
| CfpgaVersion | 1.3.6.1.4.1.161.19.3.1.4.1.32 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The FPGA version of registered SM. | |||||||||||||
| ClinkSiteName | 1.3.6.1.4.1.161.19.3.1.4.1.33 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The site name of the registered SM. | |||||||||||||
| CavgPowerLevel | 1.3.6.1.4.1.161.19.3.1.4.1.34 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The average power level of registered SM. For systems that support power control, this value can read 'NA' when the AP adjusts the transmit power of a SM until new packets are received from the SM with it transmitting at its new power level. For MIMO this is the combined receive power. | |||||||||||||
| ClastPowerLevel | 1.3.6.1.4.1.161.19.3.1.4.1.35 | DisplayString | RO | -62.8 | |||||||||
| CsesDownLinkRate | 1.3.6.1.4.1.161.19.3.1.4.1.36 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Downlink rate. | |||||||||||||
| CsesDownLinkLimit | 1.3.6.1.4.1.161.19.3.1.4.1.37 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Downlink limit. | |||||||||||||
| CsesUpLinkRate | 1.3.6.1.4.1.161.19.3.1.4.1.38 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Uplink rate. | |||||||||||||
| CsesUpLinkLimit | 1.3.6.1.4.1.161.19.3.1.4.1.39 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Uplink limit. | |||||||||||||
| CadaptRate | 1.3.6.1.4.1.161.19.3.1.4.1.40 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Downlink adapt rate to registered SM. | |||||||||||||
| CsesLoUpCIR | 1.3.6.1.4.1.161.19.3.1.4.1.41 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Low priority uplink CIR. | |||||||||||||
| CsesLoDownCIR | 1.3.6.1.4.1.161.19.3.1.4.1.42 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Low priority downlink CIR. | |||||||||||||
| CsesHiUpCIR | 1.3.6.1.4.1.161.19.3.1.4.1.43 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current High priority uplink CIR. | |||||||||||||
| CsesHiDownCIR | 1.3.6.1.4.1.161.19.3.1.4.1.44 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current High priority downlink CIR. | |||||||||||||
| ClinkPlatformVer | 1.3.6.1.4.1.161.19.3.1.4.1.45 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Platform Version. | |||||||||||||
| CsmSessionTmr | 1.3.6.1.4.1.161.19.3.1.4.1.46 | TimeTicks | RO | ||||||||||
column · TimeTicks · read-only · current SM session uptime | |||||||||||||
| CsmSessionSeqNumMismatch | 1.3.6.1.4.1.161.19.3.1.4.1.47 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The count of how many sequence number mismatch between the AP/BHM and the SM/BHS during the authentication challenge and authentication response messages. This status is only valid in a system where encryption is enabled and no authentication server is configured. | |||||||||||||
| CdataVCNum | 1.3.6.1.4.1.161.19.3.1.4.1.48 | INTEGER (18..255) | RO | ||||||||||
column · INTEGER (18..255) · read-only · current The Low Priority Data VC number in use for this link. | |||||||||||||
| ChiPriQEn | 1.3.6.1.4.1.161.19.3.1.4.1.49 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Returns whether High Priority channel is enabled. On P7/P8 devices will return 0 always. Use p7p8HiPriQEn OID for P7/P8 radios.
| |||||||||||||
| CdataVCNumHiQ | 1.3.6.1.4.1.161.19.3.1.4.1.50 | INTEGER (18..255) | RO | ||||||||||
column · INTEGER (18..255) · read-only · current The high priority Data VC number in use for this link, if any. If 0, no High Priority channel is in place. | |||||||||||||
| ClinkInOctetsHiQ | 1.3.6.1.4.1.161.19.3.1.4.1.51 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of octets received on High Priority Queue, including framing characters. | |||||||||||||
| ClinkInUcastPktsHiQ | 1.3.6.1.4.1.161.19.3.1.4.1.52 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of subnetwork-unicast packets on High Priority Queue delivered to a higher-layer protocol. | |||||||||||||
| ClinkInNUcastPktsHiQ | 1.3.6.1.4.1.161.19.3.1.4.1.53 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of non-unicast (i.e., subnetwork-broadcast or subnetwork-multicast) packets on High Priority Queue delivered to a higher-layer protocol. | |||||||||||||
| ClinkInDiscardsHiQ | 1.3.6.1.4.1.161.19.3.1.4.1.54 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of inbound packets on High Priority Queue which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.One possible reason for discarding such a packet could be to free up buffer space. | |||||||||||||
| ClinkInErrorHiQ | 1.3.6.1.4.1.161.19.3.1.4.1.55 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of inbound packets on High Priority Queue that contained errors preventing them from being deliverable to a higher-layer protocol. | |||||||||||||
| ClinkInUnknownProtosHiQ | 1.3.6.1.4.1.161.19.3.1.4.1.56 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets received on High Priority Queue via the interface which were discarded because of an unknown or unsupported protocol. | |||||||||||||
| ClinkOutOctetsHiQ | 1.3.6.1.4.1.161.19.3.1.4.1.57 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of octets on High Priority Queue transmitted out of the interface, including framing characters. | |||||||||||||
| ClinkOutUcastPktsHiQ | 1.3.6.1.4.1.161.19.3.1.4.1.58 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of packets on High Priority Queue that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. | |||||||||||||
| ClinkOutNUcastPktsHiQ | 1.3.6.1.4.1.161.19.3.1.4.1.59 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The total number of packets on High Priority Queue that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent. | |||||||||||||
| ClinkOutDiscardsHiQ | 1.3.6.1.4.1.161.19.3.1.4.1.60 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of outbound packets on High Priority Queue which were chosen to be discarded even though no errors had been detected to prevent their being transmitted.One possible reason for discarding such a packet could be to free up buffer space. | |||||||||||||
| ClinkOutErrorHiQ | 1.3.6.1.4.1.161.19.3.1.4.1.61 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of outbound packets on High Priority Queue that could not be transmitted because of errors. | |||||||||||||
| CvcQOverflow | 1.3.6.1.4.1.161.19.3.1.4.1.62 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets dropped due to Queue overflow on VC. | |||||||||||||
| CvcQOverflowHiQ | 1.3.6.1.4.1.161.19.3.1.4.1.63 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets dropped due to Queue overflow on High Priority VC, if enabled. | |||||||||||||
| Cp7p8HiPriQEn | 1.3.6.1.4.1.161.19.3.1.4.1.64 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Returns whether P7/P8 hi priority channel is enabled. On non-P7/P8 devices will return 0 always.
| |||||||||||||
| Cp7p8HiPriQ | 1.3.6.1.4.1.161.19.3.1.4.1.65 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Hi Priority Queue statistics for P7 or P8 radios, if enabled. If not enabled, or not a P7 or P8, will return 0. | |||||||||||||
| ClinkAirDelayns | 1.3.6.1.4.1.161.19.3.1.4.1.66 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The current round trip air delay in nanoseconds measured between the AP and SM. | |||||||||||||
| ClinkQualityAPData | 1.3.6.1.4.1.161.19.3.1.4.1.67 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Engineering use only. The current link quality of the SM's data from the AP. This is relative to the current modulation rate (1X, 2X, 3X, etc). | |||||||||||||
| ClinkManagementIP | 1.3.6.1.4.1.161.19.3.1.4.1.69 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current Management IP Address of the unit. 0 indicates SM is not publically addressable. | |||||||||||||
| ClinkFragmentsReceived1XVertical | 1.3.6.1.4.1.161.19.3.1.4.1.70 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Engineering use only. Number of fragments received in 1x (QPSK) modulation. For GenII OFDM and forward. For MIMO this is the vertical path. | |||||||||||||
| ClinkFragmentsReceived2XVertical | 1.3.6.1.4.1.161.19.3.1.4.1.71 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Engineering use only. Number of fragments received in 2x (16-QAM) modulation. For GenII OFDM and forward. For MIMO this is the vertical path. | |||||||||||||
| ClinkFragmentsReceived3XVertical | 1.3.6.1.4.1.161.19.3.1.4.1.72 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Engineering use only. Number of fragments received in 3x (64-QAM) modulation. For GenII OFDM and forward. For MIMO this is the vertical path. | |||||||||||||
| ClinkFragmentsReceived4XVertical | 1.3.6.1.4.1.161.19.3.1.4.1.73 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Engineering use only. Number of fragments received in 4x (256-QAM) modulation. For GenII OFDM and forward. For MIMO this is the vertical path. | |||||||||||||
| CsignalToNoiseRatioVertical | 1.3.6.1.4.1.161.19.3.1.4.1.74 | INTEGER | RO | 24 | |||||||||
| CradiusReplyMsg | 1.3.6.1.4.1.161.19.3.1.4.1.75 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The RADIUS Reply-Msg populated for the SM. This is only valid when using a backen AAA server. | |||||||||||||
| CautoUpdateStatus | 1.3.6.1.4.1.161.19.3.1.4.1.76 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current status of the auto update process | |||||||||||||
| CradiusFramedIPAddress | 1.3.6.1.4.1.161.19.3.1.4.1.77 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current This Attribute indicates the IP address to be configured for the SM management interface. | |||||||||||||
| CradiusFramedIPNetmask | 1.3.6.1.4.1.161.19.3.1.4.1.78 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current This Attribute indicates the netmask to be configured for the SM management interface. | |||||||||||||
| CradiusDefaultGateway | 1.3.6.1.4.1.161.19.3.1.4.1.79 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current This Attribute indicates the default gateway to be configured for the SM management interface. | |||||||||||||
| ClinkFragmentsReceived1XHorizontal | 1.3.6.1.4.1.161.19.3.1.4.1.80 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Engineering use only. Number of fragments received in 1x (QPSK) modulation. For MIMO only. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0. | |||||||||||||
| ClinkFragmentsReceived2XHorizontal | 1.3.6.1.4.1.161.19.3.1.4.1.81 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Engineering use only. Number of fragments received in 2x (16-QAM) modulation. For MIMO only. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0. | |||||||||||||
| ClinkFragmentsReceived3XHorizontal | 1.3.6.1.4.1.161.19.3.1.4.1.82 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Engineering use only. Number of fragments received in 3x (64-QAM) modulation. For MIMO only. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0. | |||||||||||||
| ClinkFragmentsReceived4XHorizontal | 1.3.6.1.4.1.161.19.3.1.4.1.83 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Engineering use only. Number of fragments received in 4x (256-QAM) modulation. For MIMO only. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0. | |||||||||||||
| CsignalToNoiseRatioHorizontal | 1.3.6.1.4.1.161.19.3.1.4.1.84 | INTEGER | RO | 30 | |||||||||
column · INTEGER · read-only · current Estimate of the receive signal to noise ratio in dB. MIMO radios only. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0. | |||||||||||||
| ClinkSignalStrengthRatio | 1.3.6.1.4.1.161.19.3.1.4.1.86 | DisplayString | RO | -2.5 | |||||||||
column · DisplayString · read-only · current Signal Strength Ratio in dB is the power received by the vertical antenna input (dB) - power received by the horizontal antenna input (dB). MIMO radios only. | |||||||||||||
| ClinkRadioDbmHorizontal | 1.3.6.1.4.1.161.19.3.1.4.1.87 | DisplayString | RO | -67.4 | |||||||||
| ClinkRadioDbmVertical | 1.3.6.1.4.1.161.19.3.1.4.1.88 | DisplayString | RO | -64.9 | |||||||||
| CmaxSMTxPwr | 1.3.6.1.4.1.161.19.3.1.4.1.89 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Returns whether SM is transmitting at its configured max power level. Engineering use only. | |||||||||||||
| CproductType | 1.3.6.1.4.1.161.19.3.1.4.1.90 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Returns which type of product the SM/BHS is. 450 platform only.
| |||||||||||||
| ClinkAdaptRateLowPri | 1.3.6.1.4.1.161.19.3.1.4.1.91 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The current transmitting rate of the Low Priority Data Channel. 0 : SM is not in session 1 : 1X QPSK MIMO-A/SISO 2 : 2X 16-QAM MIMO-A/SISO or QPSK MIMO-B 3 : 3X 64-QAM MIMO-A/SISO or 8-QAM MIMO-B 4 : 4X 256-QAM MIMO-A/SISO or 16-QAM MIMO-B 5 : 5X 32-QAM MIMO-B 6 : 6X 64-QAM MIMO-B 7 : 7X 128-QAM MIMO-B 8 : 8X 256-QAM MIMO-B NOTE: As of 15.2 for 450 platform, the adapt rates are the same per LUID. This OID will provide this common per LUID rate.
| |||||||||||||
| ClinkAdaptRateHighPri | 1.3.6.1.4.1.161.19.3.1.4.1.92 | INTEGER | RO | deprecated | |||||||||
column · INTEGER · read-only · deprecated The current transmitting rate of the High Priority Data Channel. -1 : High Priority Channel not configured 0 : SM is not in session 1 : 1X QPSK MIMO-A/SISO 2 : 2X 16-QAM MIMO-A/SISO or QPSK MIMO-B 3 : 3X 64-QAM MIMO-A/SISO or 8-QAM MIMO-B 4 : 4X 256-QAM MIMO-A/SISO or 16-QAM MIMO-B 5 : 5X 32-QAM MIMO-B 6 : 6X 64-QAM MIMO-B 7 : 7X 128-QAM MIMO-B 8 : 8X 256-QAM MIMO-B NOTE: As of 15.2 for 450 platform, the adapt rates are the same per LUID. OID linkAdaptRateLowPri will provide this common per LUID rate.
| |||||||||||||
| CavgPowerLevelInt | 1.3.6.1.4.1.161.19.3.1.4.1.93 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The average power level of registered SM as Integer. For systems that support power control, this value can read '0' when the AP adjusts the transmit power of a SM until new packets are received from the SM with it transmitting at its new power level. For MIMO this is the combined receive power. | |||||||||||||
| CmimoPowerLevelVertical | 1.3.6.1.4.1.161.19.3.1.4.1.94 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current For MIMO radios, the Vertical power level of registered SM as Integer. The Vertical Power (+45) level in case of 2.4GHz Dual slant MIMO | |||||||||||||
| CmimoPowerLevelHorizontal | 1.3.6.1.4.1.161.19.3.1.4.1.95 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current For MIMO radios, the Horizontal power level of registered SM as Integer. The Horizontal Power(-45) level in case of 2.4GHz Dual slant MIMO | |||||||||||||
| ClinkSwVersion | 1.3.6.1.4.1.161.19.3.1.4.1.96 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The swversion of registered SM, to be used internally. | |||||||||||||
| ClinkSpatialFrequency | 1.3.6.1.4.1.161.19.3.1.4.1.97 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The spatial frequency of registered SM. Spatial Frequency is the phase advance of the wavefront from one antenna column to the next caused by the angle at which the wavefront impinges on the array. It is represented in integer units, with 1024 equating to 360 degrees per column. A value of 2048 is used to signify a spatial frequency that is not yet known or otherwise invalid. A value of -1 is used to indicate that SM is not in session. PMP 450m only.
| |||||||||||||
| CsesMedUpCIR | 1.3.6.1.4.1.161.19.3.1.4.1.98 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Medium priority uplink CIR. | |||||||||||||
| CsesMedDownCIR | 1.3.6.1.4.1.161.19.3.1.4.1.99 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Medium priority downlink CIR. | |||||||||||||
| CsesUHiUpCIR | 1.3.6.1.4.1.161.19.3.1.4.1.100 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Ultra High priority uplink CIR. | |||||||||||||
| CsesUHiDownCIR | 1.3.6.1.4.1.161.19.3.1.4.1.101 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Ultra High priority downlink CIR. | |||||||||||||
| CmediumPriQEn | 1.3.6.1.4.1.161.19.3.1.4.1.102 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Returns whether Medium Priority channel is enabled.
| |||||||||||||
| CdataVCNumMediumQ | 1.3.6.1.4.1.161.19.3.1.4.1.103 | INTEGER (18..255) | RO | ||||||||||
column · INTEGER (18..255) · read-only · current The Medium priority Data VC number in use for this link, if any. If 0, no Medium Priority channel is in place. | |||||||||||||
| ClinkInOctetsMediumQ | 1.3.6.1.4.1.161.19.3.1.4.1.104 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of octets received on Medium Priority Queue, including framing characters. | |||||||||||||
| ClinkInUcastPktsMediumQ | 1.3.6.1.4.1.161.19.3.1.4.1.105 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of subnetwork-unicast packets on Medium Priority Queue delivered to a higher-layer protocol. | |||||||||||||
| ClinkInNUcastPktsMediumQ | 1.3.6.1.4.1.161.19.3.1.4.1.106 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of non-unicast (i.e., subnetwork-broadcast or subnetwork-multicast) packets on Medium Priority Queue delivered to a higher-layer protocol. | |||||||||||||
| ClinkInDiscardsMediumQ | 1.3.6.1.4.1.161.19.3.1.4.1.107 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of inbound packets on Medium Priority Queue which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.One possible reason for discarding such a packet could be to free up buffer space. | |||||||||||||
| ClinkInErrorMediumQ | 1.3.6.1.4.1.161.19.3.1.4.1.108 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of inbound packets on Medium Priority Queue that contained errors preventing them from being deliverable to a higher-layer protocol. | |||||||||||||
| ClinkInUnknownProtosMediumQ | 1.3.6.1.4.1.161.19.3.1.4.1.109 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets received on Medium Priority Queue via the interface which were discarded because of an unknown or unsupported protocol. | |||||||||||||
| ClinkOutOctetsMediumQ | 1.3.6.1.4.1.161.19.3.1.4.1.110 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of octets on Medium Priority Queue transmitted out of the interface, including framing characters. | |||||||||||||
| ClinkOutUcastPktsMediumQ | 1.3.6.1.4.1.161.19.3.1.4.1.111 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of packets on Medium Priority Queue that higher-levelprotocols requested be transmitted to a subnetwork-unicast address,including those that were discarded or not sent. | |||||||||||||
| ClinkOutNUcastPktsMediumQ | 1.3.6.1.4.1.161.19.3.1.4.1.112 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of packets on Medium Priority Queue that higher-levelprotocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. | |||||||||||||
| ClinkOutDiscardsMediumQ | 1.3.6.1.4.1.161.19.3.1.4.1.113 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of outbound packets on Medium Priority Queue which were chosen to be discarded even though no errors had been detected to prevent their being transmitted.One possible reason for discarding such a packet could be to free up buffer space. | |||||||||||||
| ClinkOutErrorMediumQ | 1.3.6.1.4.1.161.19.3.1.4.1.114 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of outbound packets on Medium Priority Queue that could not be transmitted because of errors. | |||||||||||||
| CultraHighPriQEn | 1.3.6.1.4.1.161.19.3.1.4.1.115 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Returns whether Ultra High Priority channel is enabled.
| |||||||||||||
| CdataVCNumUltraHighQ | 1.3.6.1.4.1.161.19.3.1.4.1.116 | INTEGER (18..255) | RO | ||||||||||
column · INTEGER (18..255) · read-only · current The Ultra High priority Data VC number in use for this link, if any. If 0, no Ultra High Priority channel is in place. | |||||||||||||
| ClinkInOctetsUltraHighQ | 1.3.6.1.4.1.161.19.3.1.4.1.117 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of octets received on Ultra High Priority Queue, including framing characters. | |||||||||||||
| ClinkInUcastPktsUltraHighQ | 1.3.6.1.4.1.161.19.3.1.4.1.118 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of subnetwork-unicast packets on Ultra High Priority Queue delivered to a higher-layer protocol. | |||||||||||||
| ClinkInNUcastPktsUltraHighQ | 1.3.6.1.4.1.161.19.3.1.4.1.119 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of non-unicast (i.e., subnetwork-broadcast or subnetwork-multicast) packets on Ultra High Priority Queue delivered to a higher-layer protocol. | |||||||||||||
| ClinkInDiscardsUltraHighQ | 1.3.6.1.4.1.161.19.3.1.4.1.120 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of inbound packets on Ultra High Priority Queue which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.One possible reason for discarding such a packet could be to free up buffer space. | |||||||||||||
| ClinkInErrorUltraHighQ | 1.3.6.1.4.1.161.19.3.1.4.1.121 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of inbound packets on Ultra High Priority Queue that contained errors preventing them from being deliverable to a higher-layer protocol. | |||||||||||||
| ClinkInUnknownProtosUltraHighQ | 1.3.6.1.4.1.161.19.3.1.4.1.122 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets received on Ultra High Priority Queue via the interface which were discarded because of an unknown or unsupported protocol. | |||||||||||||
| ClinkOutOctetsUltraHighQ | 1.3.6.1.4.1.161.19.3.1.4.1.123 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of octets on Ultra High Priority Queue transmitted out of the interface, including framing characters. | |||||||||||||
| ClinkOutUcastPktsUltraHighQ | 1.3.6.1.4.1.161.19.3.1.4.1.124 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of packets on Ultra High Priority Queue that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. | |||||||||||||
| ClinkOutNUcastPktsUltraHighQ | 1.3.6.1.4.1.161.19.3.1.4.1.125 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of packets on Ultra High Priority Queue that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent. | |||||||||||||
| ClinkOutDiscardsUltraHighQ | 1.3.6.1.4.1.161.19.3.1.4.1.126 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of outbound packets on Ultra High Priority Queue which were chosen to be discarded even though no errors had been detected to prevent their being transmitted.One possible reason for discarding such a packet could Be to free up buffer space. | |||||||||||||
| ClinkOutErrorUltraHighQ | 1.3.6.1.4.1.161.19.3.1.4.1.127 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of outbound packets on Ultra High Priority Queue that could not be transmitted because of errors. | |||||||||||||
| CvcQOverflowMediumQ | 1.3.6.1.4.1.161.19.3.1.4.1.128 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets dropped due to Queue overflow on Medium Priority VC, if enabled. | |||||||||||||
| CvcQOverflowUltraHighQ | 1.3.6.1.4.1.161.19.3.1.4.1.129 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets dropped due to Queue overflow on Ultra High Priority VC, if enabled. | |||||||||||||
| ClinkInOctets64 | 1.3.6.1.4.1.161.19.3.1.4.1.130 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of octets received on the interface, including framing characters. | |||||||||||||
| ClinkInUcastPkts64 | 1.3.6.1.4.1.161.19.3.1.4.1.131 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of subnetwork-unicast packets delivered to a higher-layer protocol. | |||||||||||||
| ClinkInNUcastPkts64 | 1.3.6.1.4.1.161.19.3.1.4.1.132 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of non-unicast (i.e., subnetwork-broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. | |||||||||||||
| ClinkInDiscards64 | 1.3.6.1.4.1.161.19.3.1.4.1.133 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. | |||||||||||||
| ClinkInError64 | 1.3.6.1.4.1.161.19.3.1.4.1.134 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. | |||||||||||||
| ClinkOutOctets64 | 1.3.6.1.4.1.161.19.3.1.4.1.135 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of octets transmitted out of the interface, including framing characters. | |||||||||||||
| ClinkOutUcastPkts64 | 1.3.6.1.4.1.161.19.3.1.4.1.136 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. | |||||||||||||
| ClinkOutNUcastPkts64 | 1.3.6.1.4.1.161.19.3.1.4.1.137 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent. | |||||||||||||
| ClinkOutDiscards64 | 1.3.6.1.4.1.161.19.3.1.4.1.138 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted.One possible reason for discarding such a packet could be to free up buffer space. | |||||||||||||
| ClinkOutError64 | 1.3.6.1.4.1.161.19.3.1.4.1.139 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of outbound packets that could not be transmitted because of errors. | |||||||||||||
| ClinkInOctetsHiQ64 | 1.3.6.1.4.1.161.19.3.1.4.1.140 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of octets received on High Priority Queue, including framing characters. | |||||||||||||
| ClinkInUcastPktsHiQ64 | 1.3.6.1.4.1.161.19.3.1.4.1.141 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of subnetwork-unicast packets on High Priority Queue delivered to a higher-layer protocol. | |||||||||||||
| ClinkInNUcastPktsHiQ64 | 1.3.6.1.4.1.161.19.3.1.4.1.142 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of non-unicast (i.e., subnetwork-broadcast or subnetwork-multicast) packets on High Priority Queue delivered to a higher-layer protocol. | |||||||||||||
| ClinkInDiscardsHiQ64 | 1.3.6.1.4.1.161.19.3.1.4.1.143 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of inbound packets on High Priority Queue which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.One possible reason for discarding such a packet could be to free up buffer space. | |||||||||||||
| ClinkInErrorHiQ64 | 1.3.6.1.4.1.161.19.3.1.4.1.144 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of inbound packets on High Priority Queue that contained errors preventing them from being deliverable to a higher-layer protocol. | |||||||||||||
| ClinkOutOctetsHiQ64 | 1.3.6.1.4.1.161.19.3.1.4.1.145 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of octets on High Priority Queue transmitted out of the interface, including framing characters. | |||||||||||||
| ClinkOutUcastPktsHiQ64 | 1.3.6.1.4.1.161.19.3.1.4.1.146 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of packets on High Priority Queue that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. | |||||||||||||
| ClinkOutNUcastPktsHiQ64 | 1.3.6.1.4.1.161.19.3.1.4.1.147 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of packets on High Priority Queue that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent. | |||||||||||||
| ClinkOutDiscardsHiQ64 | 1.3.6.1.4.1.161.19.3.1.4.1.148 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of outbound packets on High Priority Queue which were chosen to be discarded even though no errors had been detected to prevent their being transmitted.One possible reason for discarding such a packet could be to free up buffer space. | |||||||||||||
| ClinkOutErrorHiQ64 | 1.3.6.1.4.1.161.19.3.1.4.1.149 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of outbound packets on High Priority Queue that could not be transmitted because of errors. | |||||||||||||
| CretransmittedFragmentsCount | 1.3.6.1.4.1.161.19.3.1.4.1.150 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Retransmitted fragments are a normal part of operation, and are not considered errors. Higher modulation rate are periodically tested in the system and will result in retransmissions. For example, a link operating at 8X may have more retransmissions than a link at 6X but still be able to higher throughput at 8X. Therefore this statistic can be misleading, analyze with caution. | |||||||||||||
| CsoundingState | 1.3.6.1.4.1.161.19.3.1.4.1.151 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current operational state of an interface. 0 = Unknown 1 = New 2 = Assessing 3 = Tracking 4 = Untrusted
| |||||||||||||
| CdownlinkSoundingState | 1.3.6.1.4.1.161.19.3.1.4.1.152 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current operational state of an interface. 0 = Unknown 1 = New 2 = Assessing 3 = Tracking 4 = Untrusted
| |||||||||||||
| CuplinkSoundingState | 1.3.6.1.4.1.161.19.3.1.4.1.153 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current operational state of an interface. 0 = Unknown 1 = New 2 = Assessing 3 = Tracking 4 = Untrusted
| |||||||||||||
| CdownlinkMumimoRateAdapt | 1.3.6.1.4.1.161.19.3.1.4.1.154 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Downlink MU-MIMO Rate Adapt 0 : SM is not in session 1 : 1X QPSK MIMO-A 2 : 2X 16-QAM MIMO-A or QPSK MIMO-B 3 : 3X 64-QAM MIMO-A or 8-QAM MIMO-B 4 : 4X 256-QAM MIMO-A or 16-QAM MIMO-B 5 : 5X 32-QAM MIMO-B 6 : 6X 64-QAM MIMO-B 7 : 7X 128-QAM MIMO-B 8 : 8X 256-QAM MIMO-B 9 : Ineligible for MU-MIMO Operation
| |||||||||||||
| CuplinkMumimoRateAdapt | 1.3.6.1.4.1.161.19.3.1.4.1.155 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Uplink MU-MIMO Rate Adapt 0 : SM is not in session 1 : 1X QPSK MIMO-A 2 : 2X 16-QAM MIMO-A or QPSK MIMO-B 3 : 3X 64-QAM MIMO-A or 8-QAM MIMO-B 4 : 4X 256-QAM MIMO-A or 16-QAM MIMO-B 5 : 5X 32-QAM MIMO-B 6 : 6X 64-QAM MIMO-B 7 : 7X 128-QAM MIMO-B 8 : 8X 256-QAM MIMO-B 9 : Ineligible for MU-MIMO Operation
| |||||||||||||
| CaverageEvmDownlinkPathA | 1.3.6.1.4.1.161.19.3.1.4.1.156 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The average downlink EVM expressed in dB for Path A.
| |||||||||||||
| CaverageEvmDownlinkPathB | 1.3.6.1.4.1.161.19.3.1.4.1.157 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The average downlink EVM expressed in dB for Path B.
| |||||||||||||
| CcombinedEvmDownlink | 1.3.6.1.4.1.161.19.3.1.4.1.158 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The combined downlink EVM expressed in dB for both paths. This value is scaled up by 10 (ie. -269 is equivalent to -26.9 dB).
| |||||||||||||
| CaverageEvmUplinkPathA | 1.3.6.1.4.1.161.19.3.1.4.1.159 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The average uplink EVM expressed in dB for Path A.
| |||||||||||||
| CaverageEvmUplinkPathB | 1.3.6.1.4.1.161.19.3.1.4.1.160 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The average uplink EVM expressed in dB for Path B.
| |||||||||||||
| CcombinedEvmUplink | 1.3.6.1.4.1.161.19.3.1.4.1.161 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The combined uplink EVM expressed in dB for both paths. This value is scaled up by 10 (ie. -269 is equivalent to -26.9 dB).
| |||||||||||||
| CfastRateAdaptActive | 1.3.6.1.4.1.161.19.3.1.4.1.162 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Returns TRUE if Fast Rate Adapt is active on this link. Engineering Key only.
| |||||||||||||
| CbestEvmDownlinkPathA | 1.3.6.1.4.1.161.19.3.1.4.1.163 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The best downlink EVM for 1 minute expressed in dB for Path A.
| |||||||||||||
| CbestEvmDownlinkPathB | 1.3.6.1.4.1.161.19.3.1.4.1.164 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The best downlink EVM for 1 minute expressed in dB for Path B.
| |||||||||||||
| CbestEvmUplinkPathA | 1.3.6.1.4.1.161.19.3.1.4.1.165 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The best uplink EVM for 1 minute expressed in dB for Path A.
| |||||||||||||
| CbestEvmUplinkPathB | 1.3.6.1.4.1.161.19.3.1.4.1.166 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The best uplink EVM for 1 minute expressed in dB for Path B.
| |||||||||||||
| CworstEvmDownlinkPathA | 1.3.6.1.4.1.161.19.3.1.4.1.167 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The worst downlink EVM for 1 minute expressed in dB for Path A.
| |||||||||||||
| CworstEvmDownlinkPathB | 1.3.6.1.4.1.161.19.3.1.4.1.168 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The worst downlink EVM for 1 minute expressed in dB for Path B.
| |||||||||||||
| CworstEvmUplinkPathA | 1.3.6.1.4.1.161.19.3.1.4.1.169 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The worst uplink EVM for 1 minute expressed in dB for Path A.
| |||||||||||||
| CworstEvmUplinkPathB | 1.3.6.1.4.1.161.19.3.1.4.1.170 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The worst uplink EVM for 1 minute expressed in dB for Path B.
| |||||||||||||
| ClinkColorCodePriority | 1.3.6.1.4.1.161.19.3.1.4.1.171 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Color Code Priority
| |||||||||||||
| CmodRateDL | 1.3.6.1.4.1.161.19.3.1.4.1.172 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Downlink modulation rate of registered CanopyV SMs. | |||||||||||||
| ClinkVcDepth | 1.3.6.1.4.1.161.19.3.1.4.1.173 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current VC Depth for the given LUID.
| |||||||||||||
| NwhispApsEvent | 1.3.6.1.4.1.161.19.3.1.5 | ||||||||||||
| NwhispApsRegEvent | 1.3.6.1.4.1.161.19.3.1.5.1 | ||||||||||||
| !whispRegComplete | 1.3.6.1.4.1.161.19.3.1.5.1.1 | ||||||||||||
| !whispRegLost | 1.3.6.1.4.1.161.19.3.1.5.1.2 | ||||||||||||
notification · current Signals registration lost. | |||||||||||||
| !whispRegFailure | 1.3.6.1.4.1.161.19.3.1.5.1.3 | ||||||||||||
notification · current Signals a registration failure has occured.
| |||||||||||||
| !whispDefKeyUsed | 1.3.6.1.4.1.161.19.3.1.5.1.4 | ||||||||||||
| NwhispGPSEvent | 1.3.6.1.4.1.161.19.3.1.5.2 | ||||||||||||
| !whispGPSInSync | 1.3.6.1.4.1.161.19.3.1.5.2.1 | ||||||||||||
notification · current Signals a transition from not-synchronized to synchronized.
| |||||||||||||
| !whispGPSOutSync | 1.3.6.1.4.1.161.19.3.1.5.2.2 | ||||||||||||
notification · current Signals a transition from synchronized to not-synchronized.
| |||||||||||||
| NwhispApsDfsEvent | 1.3.6.1.4.1.161.19.3.1.5.3 | ||||||||||||
| !whispRadarDetected | 1.3.6.1.4.1.161.19.3.1.5.3.1 | ||||||||||||
| !whispRadarEnd | 1.3.6.1.4.1.161.19.3.1.5.3.2 | ||||||||||||
| NwhispApRegulatoryEvent | 1.3.6.1.4.1.161.19.3.1.5.4 | ||||||||||||
| !regulatoryApCheckInvalidChanFailed | 1.3.6.1.4.1.161.19.3.1.5.4.1 | ||||||||||||
notification · current Regulatory Check failed for the unit due to a invalid channel for the configured region. regulatoryStatus - Text description for the failure. physAddress - the MAC address of the unit.
| |||||||||||||
| !regulatoryCheckFailedNoRegionAp | 1.3.6.1.4.1.161.19.3.1.5.4.2 | ||||||||||||
notification · current Regulatory Check failed because a valid region has not be configured. physAddress - the MAC address of the unit.
| |||||||||||||
| !regulatoryApCheckInvalidChBwFailed | 1.3.6.1.4.1.161.19.3.1.5.4.3 | ||||||||||||
notification · current Regulatory Check failed due to an invalid channel bandwidth for the configured region. regulatoryStatus - Text description for the failure. physAddress - the MAC address of the unit.
| |||||||||||||
| NwhispApRFOverloadEvent | 1.3.6.1.4.1.161.19.3.1.5.5 | ||||||||||||
| !rfLinkOverloadCondition | 1.3.6.1.4.1.161.19.3.1.5.5.1 | ||||||||||||
notification · current AP has exceeded the preset discard percentage in the RF Downlink Direction. rfOutDiscardRate - Current discard Rate. physAddress - the MAC address of the unit.
| |||||||||||||
| NwhispApsMumimoTrialEvent | 1.3.6.1.4.1.161.19.3.1.5.6 | ||||||||||||
| !mumimoTrialEvent | 1.3.6.1.4.1.161.19.3.1.5.6.1 | ||||||||||||
notification · current MU-MIMO Trial Event Notification. Value indicates percentage of trial licenses remaining. | |||||||||||||
| NwhispApLqiEvent | 1.3.6.1.4.1.161.19.3.1.5.7 | ||||||||||||
| !whispDownlinkLqiBelowThreshold | 1.3.6.1.4.1.161.19.3.1.5.7.1 | ||||||||||||
notification · current Signals Downlink Link Quality Indicator falling below raise trap threshold | |||||||||||||
| !whispDownlinkLqiRestored | 1.3.6.1.4.1.161.19.3.1.5.7.2 | ||||||||||||
notification · current Signals Downlink Link Quality Indicator going back above or equal to the clear trap threshold | |||||||||||||
| !whispUplinkLqiBelowThreshold | 1.3.6.1.4.1.161.19.3.1.5.7.3 | ||||||||||||
notification · current Signals Uplink Link Quality Indicator falling below raise trap threshold. | |||||||||||||
| !whispUplinkLqiRestored | 1.3.6.1.4.1.161.19.3.1.5.7.4 | ||||||||||||
notification · current Signals Uplink Link Quality Indicator going back above or equal to the clear trap threshold. | |||||||||||||
| NwhispApsCbrsEvent | 1.3.6.1.4.1.161.19.3.1.5.8 | ||||||||||||
| !cbrsTxEnable | 1.3.6.1.4.1.161.19.3.1.5.8.1 | ||||||||||||
notification · current CBRS Transmission Enable Notification
| |||||||||||||
| !cbrsTxDisable | 1.3.6.1.4.1.161.19.3.1.5.8.2 | ||||||||||||
notification · current CBRS Transmission Disable Notification
| |||||||||||||
| NwhispApsGroups | 1.3.6.1.4.1.161.19.3.1.6 | ||||||||||||
| GwhispLinkTestGroup | 1.3.6.1.4.1.161.19.3.1.6.1 | ||||||||||||
group · current WHiSP APs link test group.
| |||||||||||||
| GwhispApsConfigGroup | 1.3.6.1.4.1.161.19.3.1.6.2 | ||||||||||||
group · current WHiSP APs configuration group.
| |||||||||||||
| GwhispApsLinkTableGroup | 1.3.6.1.4.1.161.19.3.1.6.3 | ||||||||||||
group · current WHiSP APs Link Table group.
| |||||||||||||
| GwhispApsNotifGroup | 1.3.6.1.4.1.161.19.3.1.6.4 | ||||||||||||
group · current WHiSP APs notification group.
| |||||||||||||
| GwhispApsFailedRegTableGroup | 1.3.6.1.4.1.161.19.3.1.6.5 | ||||||||||||
group · current WHiSP APs Failed Registration Table group. | |||||||||||||
| GwhispApsFrUtlStatsIntervalLowGroup | 1.3.6.1.4.1.161.19.3.1.6.7 | ||||||||||||
group · current WHiSP APs Frame Utilization Statistics group for interval of 1 minute. Only supported for PMP and PTP 450 AP and Backhauls.
| |||||||||||||
| GwhispApsFrUtlStatsIntervalMediumGroup | 1.3.6.1.4.1.161.19.3.1.6.8 | ||||||||||||
group · current WHiSP APs Frame Utilization Statistics group for interval of 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
| |||||||||||||
| GwhispApsFrUtlStatsIntervalHighGroup | 1.3.6.1.4.1.161.19.3.1.6.9 | ||||||||||||
group · current WHiSP APs Frame Utilization Statistics group for interval of 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls.
| |||||||||||||
| GwhispApsDHCPv6RelayGroup | 1.3.6.1.4.1.161.19.3.1.6.10 | ||||||||||||
group · current WHiSP APs DHCPv6 Relay Statistics group.
| |||||||||||||
| NwhispApsStatus | 1.3.6.1.4.1.161.19.3.1.7 | ||||||||||||
| SregCount | 1.3.6.1.4.1.161.19.3.1.7.1 | Unsigned32 | RO | 34 | |||||||||
| SgpsStatus | 1.3.6.1.4.1.161.19.3.1.7.2 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current GPS status. | |||||||||||||
| SradioSlicingAp | 1.3.6.1.4.1.161.19.3.1.7.3 | INTEGER | RO | obsolete | |||||||||
scalar · INTEGER · read-only · obsolete The variable is deprecated. | |||||||||||||
| SradioTxGainAp | 1.3.6.1.4.1.161.19.3.1.7.4 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Radio transmit gain setting. | |||||||||||||
| SdataSlotDwn | 1.3.6.1.4.1.161.19.3.1.7.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slot down. | |||||||||||||
| SdataSlotUp | 1.3.6.1.4.1.161.19.3.1.7.6 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slot up. | |||||||||||||
| SdataSlotUpHi | 1.3.6.1.4.1.161.19.3.1.7.7 | Unsigned32 | RO | obsolete | |||||||||
scalar · Unsigned32 · read-only · obsolete Number of high priority data slot up. | |||||||||||||
| SupLnkAckSlot | 1.3.6.1.4.1.161.19.3.1.7.8 | Unsigned32 | RO | obsolete | |||||||||
scalar · Unsigned32 · read-only · obsolete Uplink ack slots. | |||||||||||||
| SupLnkAckSlotHi | 1.3.6.1.4.1.161.19.3.1.7.9 | Unsigned32 | RO | obsolete | |||||||||
scalar · Unsigned32 · read-only · obsolete Hige priority uplink ack slots. | |||||||||||||
| SdwnLnkAckSlot | 1.3.6.1.4.1.161.19.3.1.7.10 | Unsigned32 | RO | obsolete | |||||||||
scalar · Unsigned32 · read-only · obsolete Downlink ack slots. | |||||||||||||
| SdwnLnkAckSlotHi | 1.3.6.1.4.1.161.19.3.1.7.11 | Unsigned32 | RO | obsolete | |||||||||
scalar · Unsigned32 · read-only · obsolete Hige priority downlink ack slots. | |||||||||||||
| SnumCtrSlot | 1.3.6.1.4.1.161.19.3.1.7.12 | Unsigned32 | RO | obsolete | |||||||||
scalar · Unsigned32 · read-only · obsolete Number of contention slots. | |||||||||||||
| SnumCtrSlotHi | 1.3.6.1.4.1.161.19.3.1.7.13 | Unsigned32 | RO | obsolete | |||||||||
scalar · Unsigned32 · read-only · obsolete High priority control slot. | |||||||||||||
| SdfsStatus | 1.3.6.1.4.1.161.19.3.1.7.14 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Dynamic frequency shifting status. | |||||||||||||
| SdfsStatusPrimary | 1.3.6.1.4.1.161.19.3.1.7.15 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Dynamic frequency shifting status for Primary Channel. | |||||||||||||
| SdfsStatusAlt1 | 1.3.6.1.4.1.161.19.3.1.7.16 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Dynamic frequency shifting status for Alternate Channel 1 | |||||||||||||
| SdfsStatusAlt2 | 1.3.6.1.4.1.161.19.3.1.7.17 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Dynamic frequency shifting status for Alternate Channel 2 | |||||||||||||
| SmaxRegSMCount | 1.3.6.1.4.1.161.19.3.1.7.18 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Maximum number of unique Subscriber Modules registered with this AP at once | |||||||||||||
| SsystemTime | 1.3.6.1.4.1.161.19.3.1.7.19 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Displays the system time of the unit | |||||||||||||
| SlastNTPTime | 1.3.6.1.4.1.161.19.3.1.7.20 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Displays the last NTP time acquired by the AP | |||||||||||||
| SregulatoryStatus | 1.3.6.1.4.1.161.19.3.1.7.21 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The current status of the regulatory check on the AP. | |||||||||||||
| SdhcpRlyAgntStat-reqRecvd | 1.3.6.1.4.1.161.19.3.1.7.22 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of DHCP Requests received by the DHCP Relay. | |||||||||||||
| SdhcpRlyAgntStat-reqRelayed | 1.3.6.1.4.1.161.19.3.1.7.23 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of DHCP Requests relayed by the DHCP Relay. | |||||||||||||
| SdhcpRlyAgntStat-reqDiscards | 1.3.6.1.4.1.161.19.3.1.7.24 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of DHCP Requests discarded by the DHCP Relay. | |||||||||||||
| SdhcpRlyAgntStat-respRecvd | 1.3.6.1.4.1.161.19.3.1.7.25 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of DHCP Replies received by the DHCP Relay. | |||||||||||||
| SdhcpRlyAgntStat-respRelayed | 1.3.6.1.4.1.161.19.3.1.7.26 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of DHCP Replies relayed by the DHCP Relay. | |||||||||||||
| SdhcpRlyAgntStat-respDiscards | 1.3.6.1.4.1.161.19.3.1.7.27 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of DHCP Replies discarded by the DHCP Relay. | |||||||||||||
| SdhcpRlyAgntStat-untrustedDiscards | 1.3.6.1.4.1.161.19.3.1.7.28 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of untrusted messages discarded by the DHCP Relay. | |||||||||||||
| SdhcpRlyAgntStat-maxHopDiscards | 1.3.6.1.4.1.161.19.3.1.7.29 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of messages discarded by the DHCP Relay due to exceeded max hop. | |||||||||||||
| SdhcpRlyAgntStat-pktTooBig | 1.3.6.1.4.1.161.19.3.1.7.30 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of messages forwarded without relay information by the DHCP Relay due to relay information exceeding max message size. | |||||||||||||
| SdhcpRlyAgntStat-invalidGiaddrDiscards | 1.3.6.1.4.1.161.19.3.1.7.31 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of messages discarded by the DHCP Relay due to invalid giaddr in packet. | |||||||||||||
| SregFailureCount | 1.3.6.1.4.1.161.19.3.1.7.32 | Counter32 | RO | 1 | |||||||||
| SntpLogSNMP | 1.3.6.1.4.1.161.19.3.1.7.33 | EventString | RO | ||||||||||
scalar · EventString · read-only · current NTP Log | |||||||||||||
| SuGPSPowerStatus | 1.3.6.1.4.1.161.19.3.1.7.34 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Current Aux Port Power to UGPS Status (UGPS capable APs only). | |||||||||||||
| SrfOutDiscardRate | 1.3.6.1.4.1.161.19.3.1.7.35 | INTEGER (0..100) | RO | ||||||||||
scalar · INTEGER (0..100) · read-only · current Percentage of OutDiscards on the RF link (RF Overload %) in the last minute. | |||||||||||||
| SautoUpdateGlobalStatus | 1.3.6.1.4.1.161.19.3.1.7.36 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Status of the Auto-Update Command | |||||||||||||
| ScurrentRadioFreqCarrier | 1.3.6.1.4.1.161.19.3.1.7.37 | INTEGER | RO | 5785000 | |||||||||
| SmumimoMode | 1.3.6.1.4.1.161.19.3.1.7.38 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Returns the current operating mode of MU-MIMO. PMP 450m only. | |||||||||||||
| SvcCount | 1.3.6.1.4.1.161.19.3.1.7.39 | Unsigned32 | RO | deprecated | |||||||||
scalar · Unsigned32 · read-only · deprecated Number of VCs allocated across all registered SMs. This OID is deprecated. Please use dataChannelCount instead. | |||||||||||||
| SmumimoTrialPercentageRemaining | 1.3.6.1.4.1.161.19.3.1.7.40 | INTEGER (0..100) | RO | ||||||||||
scalar · INTEGER (0..100) · read-only · current Percentage of remaining MU-MIMO Trial Licenses | |||||||||||||
| SsmPrioritizationCountLow | 1.3.6.1.4.1.161.19.3.1.7.41 | INTEGER (0..239) | RO | ||||||||||
scalar · INTEGER (0..239) · read-only · current SM Prioritization Low Group count. Indicates the number of SMs that belong to the SM Prioritization Low Group. | |||||||||||||
| SsmPrioritizationCountHigh | 1.3.6.1.4.1.161.19.3.1.7.42 | INTEGER (0..239) | RO | ||||||||||
scalar · INTEGER (0..239) · read-only · current SM Prioritization High Group count. Indicates the number of SMs that belong to the SM Prioritization High Group. | |||||||||||||
| SlowPriorityDataChannelCount | 1.3.6.1.4.1.161.19.3.1.7.43 | INTEGER (0..238) | RO | ||||||||||
scalar · INTEGER (0..238) · read-only · current Low Priority Data Channel count. Indicates the number of Data Channels configured at Low Priority QoS level. | |||||||||||||
| SmediumPriorityDataChannelCount | 1.3.6.1.4.1.161.19.3.1.7.44 | INTEGER (0..238) | RO | ||||||||||
scalar · INTEGER (0..238) · read-only · current Medium Priority Data Channel count. Indicates the number of Data Channels configured at Medium Priority QoS level. | |||||||||||||
| ShighPriorityDataChannelCount | 1.3.6.1.4.1.161.19.3.1.7.45 | INTEGER (0..238) | RO | ||||||||||
scalar · INTEGER (0..238) · read-only · current High Priority Data Channel count. Indicates the number of Data Channels configured at High Priority QoS level. | |||||||||||||
| SultraHighPriorityDataChannelCount | 1.3.6.1.4.1.161.19.3.1.7.46 | INTEGER (0..238) | RO | ||||||||||
scalar · INTEGER (0..238) · read-only · current Ultra High Priority Data Channel count. Indicates the number of Data Channels configured at Ultra High Priority QoS level. | |||||||||||||
| SdataChannelCount | 1.3.6.1.4.1.161.19.3.1.7.47 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Number of Data Channels allocated across all registered SMs. | |||||||||||||
| Saes256FeatureKeyStatus | 1.3.6.1.4.1.161.19.3.1.7.48 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Returns the status of the AES-256 Encryption feature Key. | |||||||||||||
| NwhispApsDHCPv6RelayStats | 1.3.6.1.4.1.161.19.3.1.7.49 | ||||||||||||
| SreqRecvd | 1.3.6.1.4.1.161.19.3.1.7.49.1 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of DHCPv6 Requests received by the DHCPv6 Relay. | |||||||||||||
| SreqRelayed | 1.3.6.1.4.1.161.19.3.1.7.49.2 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of DHCPv6 Requests relayed by the DHCP Relay. | |||||||||||||
| SreqDiscards | 1.3.6.1.4.1.161.19.3.1.7.49.3 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of DHCPv6 Requests discarded by the DHCPv6 Relay. | |||||||||||||
| SrespRecvd | 1.3.6.1.4.1.161.19.3.1.7.49.4 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of DHCPv6 Replies received by the DHCPv6 Relay. | |||||||||||||
| SrespRelayed | 1.3.6.1.4.1.161.19.3.1.7.49.5 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of DHCPv6 Replies relayed by the DHCPv6 Relay. | |||||||||||||
| SrespDiscards | 1.3.6.1.4.1.161.19.3.1.7.49.6 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of DHCPv6 Replies discarded by the DHCPv6 Relay. | |||||||||||||
| SpktTooBig | 1.3.6.1.4.1.161.19.3.1.7.49.7 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of messages forwarded without relay information by the DHCPv6 Relay due to relay information exceeding max message size. | |||||||||||||
| StotalActiveSmCount | 1.3.6.1.4.1.161.19.3.1.7.50 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Returns the total number of SMs before last channel/EIRP change. PMP Only. | |||||||||||||
| SfailedSmCountStatus | 1.3.6.1.4.1.161.19.3.1.7.51 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Returns the number of SMs not reconnected after last channel/EIRP change. PMP Only. | |||||||||||||
| SfailedSmPercent | 1.3.6.1.4.1.161.19.3.1.7.52 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Returns the percentage of SMs that did not reconnect after last channel/EIRP change. PMP Only. | |||||||||||||
| SactiveIdleSmCount | 1.3.6.1.4.1.161.19.3.1.7.53 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Returns the number of idle SMs which are considered active. This count is included while computing total SM count. PMP Only. | |||||||||||||
| SdhcpRlyAgntStat-invalidPacketDiscards | 1.3.6.1.4.1.161.19.3.1.7.54 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of messages discarded by the DHCP Relay due to invalid or corrupted packet. | |||||||||||||
| SinterferenceCancellationMode | 1.3.6.1.4.1.161.19.3.1.7.55 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Returns the current operating mode of Interference Cancellation. PMP 450m only. | |||||||||||||
| SinterferenceCancellationTrialPercentageRemaining | 1.3.6.1.4.1.161.19.3.1.7.56 | INTEGER (0..100) | RO | ||||||||||
scalar · INTEGER (0..100) · read-only · current Percentage of remaining Interference Cancellation Trial Licenses | |||||||||||||
| TwhispFailedRegTable | 1.3.6.1.4.1.161.19.3.1.8 | NA | |||||||||||
table · not-accessible · current List of link test results | |||||||||||||
| RwhispFailedRegEntry | 1.3.6.1.4.1.161.19.3.1.8.1 | NA | |||||||||||
| CregGrantReason | 1.3.6.1.4.1.161.19.3.1.8.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The registration failure reason
| |||||||||||||
| CregFailESN | 1.3.6.1.4.1.161.19.3.1.8.1.2 | PhysAddress | RO | ||||||||||
column · PhysAddress · read-only · current The ESN that failed to register | |||||||||||||
| CregFailTime | 1.3.6.1.4.1.161.19.3.1.8.1.3 | TimeTicks | RO | ||||||||||
column · TimeTicks · read-only · current The number of ticks that occurred when the ESN failed to register | |||||||||||||
| CregFailSeqNum | 1.3.6.1.4.1.161.19.3.1.8.1.4 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sequence when the register failure was given. | |||||||||||||
| CregFailReasonText | 1.3.6.1.4.1.161.19.3.1.8.1.5 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The text description of the failure. | |||||||||||||
| NwhispApsDNS | 1.3.6.1.4.1.161.19.3.1.9 | ||||||||||||
| SntpDomainNameAppend | 1.3.6.1.4.1.161.19.3.1.9.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Select whether to append the configured management domain name to the configured trap names. For example, if dnsMgmtDomainName is set to 'example.com', ntpServer is set to 'ntp', and ntpDomainNameAppend is set to appendDomain, the ntpServer name used would be 'ntp.example.com'.
| |||||||||||||
| SntpServer1 | 1.3.6.1.4.1.161.19.3.1.9.2 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current NTP Server 1 Address. Format is either an IP address or DNS name. | |||||||||||||
| SntpServer2 | 1.3.6.1.4.1.161.19.3.1.9.3 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current NTP Server 2 Address. Format is either an IP address or DNS name. | |||||||||||||
| SntpServer3 | 1.3.6.1.4.1.161.19.3.1.9.4 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current NTP Server 3 Address. Format is either an IP address or DNS name. | |||||||||||||
| SdhcprDomainNameAppend | 1.3.6.1.4.1.161.19.3.1.9.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Select whether to append the configured management domain name to the configured trap names. For example, if dnsMgmtDomainName is set to 'example.com', dhcprServer is set to 'dhcpr', and dhcprDomainNameAppend is set to appendDomain, the dhcprServer name used would be 'dhcpr.example.com'.
| |||||||||||||
| SdhcprServer | 1.3.6.1.4.1.161.19.3.1.9.6 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current DHCP Server IP which will be used for forwarding DHCP messages by the DHCP Relay Agent in the MultiPoint AP. - Format is either an IP address or DNS name. - Default is 255.255.255.255 (broadcast). | |||||||||||||
| SauthDomainNameAppend | 1.3.6.1.4.1.161.19.3.1.9.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Select whether to append the configured management domain name to the configured authServer names. For example, if dnsMgmtDomainName is set to 'example.com', authServer1 is set to 'auth1', and authDomainNameAppend is set to appendDomain, the authServer1 name used would be 'auth1.example.com'.
| |||||||||||||
| SauthServer1 | 1.3.6.1.4.1.161.19.3.1.9.8 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Authentication Server 1. Format is either an IP address or DNS name. | |||||||||||||
| SauthServer2 | 1.3.6.1.4.1.161.19.3.1.9.9 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Authentication Server 2. Format is either an IP address or DNS name. | |||||||||||||
| SauthServer3 | 1.3.6.1.4.1.161.19.3.1.9.10 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Authentication Server 3. Format is either an IP address or DNS name. | |||||||||||||
| SauthServer4 | 1.3.6.1.4.1.161.19.3.1.9.11 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Authentication Server 4. Format is either an IP address or DNS name. | |||||||||||||
| SauthServer5 | 1.3.6.1.4.1.161.19.3.1.9.12 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Authentication Server 5. Format is either an IP address or DNS name. | |||||||||||||
| SacctDomainNameAppend | 1.3.6.1.4.1.161.19.3.1.9.13 | INTEGER | RW | obsolete | |||||||||
scalar · INTEGER · read-write · obsolete Obsoleted. Use whispApsDNS.authDomainNameAppend.
| |||||||||||||
| SuserAuthServer1 | 1.3.6.1.4.1.161.19.3.1.9.14 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current User Authentication Server 1. Format is either an IP address or DNS name. | |||||||||||||
| SuserAuthServer2 | 1.3.6.1.4.1.161.19.3.1.9.15 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current User Authentication Server 2. Format is either an IP address or DNS name. | |||||||||||||
| SuserAuthServer3 | 1.3.6.1.4.1.161.19.3.1.9.16 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current User Authentication Server 3. Format is either an IP address or DNS name. | |||||||||||||
| SuserAuthDomainNameAppend | 1.3.6.1.4.1.161.19.3.1.9.17 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Select whether to append the configured management domain name to the configured user authentication server names. For example, if dnsMgmtDomainName is set to 'example.com', authServer1 is set to 'auth1', and userAuthDomainNameAppend is set to enableDNSDomain, the authServer1 name used would be 'auth1.example.com'.
| |||||||||||||
| SoneXDomainNameAppend | 1.3.6.1.4.1.161.19.3.1.9.18 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Select whether to append the configured management domain name to the configured 802.1X Authentication server names. For example, if dnsMgmtDomainName is set to 'example.com', oneXServer is set to 'auth', and authDomainNameAppend is set to appendDomain, the authServer1 name used would be 'auth.example.com'.
| |||||||||||||
| SoneXServer | 1.3.6.1.4.1.161.19.3.1.9.19 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current 802.1X Authentication Server Address. | |||||||||||||
| SntpEnable | 1.3.6.1.4.1.161.19.3.1.9.20 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable NTP.
| |||||||||||||
| NwhispApsRFConfig | 1.3.6.1.4.1.161.19.3.1.10 | ||||||||||||
| TwhispApsRFConfigRadios | 1.3.6.1.4.1.161.19.3.1.10.1 | NA | |||||||||||
table · not-accessible · current Radio configuration table. | |||||||||||||
| RwhispApsRFConfigRadioEntry | 1.3.6.1.4.1.161.19.3.1.10.1.1 | NA | |||||||||||
| CradioFreqCarrier | 1.3.6.1.4.1.161.19.3.1.10.1.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current RF Frequency. Please see the whispBoxRFPhysicalRadioFrequencies SNMP table for a list of available frequencies. 0: wired. As of release 16.1, this OID no longer requires reboot to take affect. It will be applied immediately. SMs will be signaled to the configured frequency.
| |||||||||||||
| CradioDownlinkPercent | 1.3.6.1.4.1.161.19.3.1.10.1.1.2 | INTEGER (1..99) | RW | ||||||||||
column · INTEGER (1..99) · read-write · current This is the percentage of frame data space allocated for downlink. Various radio platforms and regions will have different allowable downlink percentages.
| |||||||||||||
| CradioMaxRange | 1.3.6.1.4.1.161.19.3.1.10.1.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Access point max range. This can be in miles or KM based upon the radioMaxRangeUnit setting so set radioMaxRangeUnit first and then radioMaxRange. RadioMaxRangeUnit alone should not be changed so please make sure that radioMaxRange value is also set after setting the unit. | |||||||||||||
| CradioControlSlots | 1.3.6.1.4.1.161.19.3.1.10.1.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Total number of contention slots for HW Scheduling Point-to-Mulitpoint mode (Not applicable for PtoP radios). For PMP 450 the minimum is 1 control slot, others minimum is zero. Maximum contention slots is 15. | |||||||||||||
| CradioTransmitOutputPower | 1.3.6.1.4.1.161.19.3.1.10.1.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Transmitter output power. Deprecated in favor of 'TransmitterOP' in radioConfig. For 450v, see carrierTxPower.
| |||||||||||||
| CradioColorCode | 1.3.6.1.4.1.161.19.3.1.10.1.1.6 | INTEGER (0..254) | RW | ||||||||||
column · INTEGER (0..254) · read-write · current Color code. | |||||||||||||
| CradioMaxRangeUnit | 1.3.6.1.4.1.161.19.3.1.10.1.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Unit of Max range value. Set radioMaxRangeUnit first and then radioMaxRange. RadioMaxRangeUnit alone should not be changed so please make sure that radioMaxRange value is also set after changing the unit.
| |||||||||||||
| NwhispApsControls | 1.3.6.1.4.1.161.19.3.1.11 | ||||||||||||
| SclearLinkTableStats | 1.3.6.1.4.1.161.19.3.1.11.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting this to a nonzero value will clear the link table stats. | |||||||||||||
| SsetSectorReferenceEVM | 1.3.6.1.4.1.161.19.3.1.11.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current 1 = Set Reference EVM only if it is not already set 0 = Always override Valid only on PMP devices
| |||||||||||||
| NwhispApsFrUtlStats | 1.3.6.1.4.1.161.19.3.1.12 | ||||||||||||
| NwhispApsFrUtlStatsIntervalLow | 1.3.6.1.4.1.161.19.3.1.12.1 | ||||||||||||
| SfrUtlLowTotalDownlinkUtilization | 1.3.6.1.4.1.161.19.3.1.12.1.1 | INTEGER | RO | 18 | |||||||||
| SfrUtlLowTotalUplinkUtilization | 1.3.6.1.4.1.161.19.3.1.12.1.2 | INTEGER | RO | 16 | |||||||||
| SfrUtlLowTotalDownlinkSlots | 1.3.6.1.4.1.161.19.3.1.12.1.3 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Total downlink data slots in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlLowDownlinkLowPrioSlots | 1.3.6.1.4.1.161.19.3.1.12.1.4 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink low priority traffic in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlLowDownlinkHiPrioSlots | 1.3.6.1.4.1.161.19.3.1.12.1.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink high priority traffic in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlLowDownlinkBcastSlots | 1.3.6.1.4.1.161.19.3.1.12.1.6 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink broadcast and multicast traffic in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlLowDownlinkAckSlots | 1.3.6.1.4.1.161.19.3.1.12.1.7 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for Downlink Canopy MAC Acknowledgements in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlLowDownlinkCntlMsgSlots | 1.3.6.1.4.1.161.19.3.1.12.1.8 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink registration and control messages in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlLowTotalUplinkSlots | 1.3.6.1.4.1.161.19.3.1.12.1.9 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Total uplink data slots in the last 1 minute. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlLowUplinkLowPrioSlots | 1.3.6.1.4.1.161.19.3.1.12.1.10 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink low priority traffic in the last 1 minute. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlLowUplinkHiPrioSlots | 1.3.6.1.4.1.161.19.3.1.12.1.11 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink high priority traffic in the last 1 minute. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlLowUplinkAckSlots | 1.3.6.1.4.1.161.19.3.1.12.1.12 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for Uplink Canopy MAC Acknowledgements in the last 1 minute. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlLowMaxDownlinkSlots | 1.3.6.1.4.1.161.19.3.1.12.1.13 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Maximum possible downlink data slots for a minute. This is calculated as ((Downlink slots in a frame) * (Number of frames in a second) * 60). Downlink slots in a frame depends on the frame configuration. Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlLowMaxUplinkSlots | 1.3.6.1.4.1.161.19.3.1.12.1.14 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Maximum possible uplink data slots for a minute. This is calculated as ((Uplink slots in a frame) * (Number of frames in a second) * 60). Uplink slots in a frame depends on the frame configuration. Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlLowEthInDiscards | 1.3.6.1.4.1.161.19.3.1.12.1.15 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of incoming Ethernet packets discarded in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlLowEthOutDiscards | 1.3.6.1.4.1.161.19.3.1.12.1.16 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of outgoing Ethernet packets discarded in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlLowRFInDiscards | 1.3.6.1.4.1.161.19.3.1.12.1.17 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of incoming radio packets discarded in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlLowRFOutDiscards | 1.3.6.1.4.1.161.19.3.1.12.1.18 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of outgoing radio packets discarded in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlLowIntervalBwReqPercentage | 1.3.6.1.4.1.161.19.3.1.12.1.19 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of bandwidth request received in the last 1 minute. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic. | |||||||||||||
| SfrUtlLowIntervalBwReqRx | 1.3.6.1.4.1.161.19.3.1.12.1.20 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of bandwidth request received in the last 1 minute. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic. | |||||||||||||
| SfrUtlLowIntervalBwReqMissed | 1.3.6.1.4.1.161.19.3.1.12.1.21 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of bandwidth request missed in the last 1 minute. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic. | |||||||||||||
| SfrUtlLowContentionSlots | 1.3.6.1.4.1.161.19.3.1.12.1.22 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of scheduled contention slots available in the last 1 minute. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlLowAvgDownlinkSlots | 1.3.6.1.4.1.161.19.3.1.12.1.23 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Average downlink data slots per frame in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlLowAvgUplinkSlots | 1.3.6.1.4.1.161.19.3.1.12.1.24 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Average uplink data slots per frame in the last 1 minute. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlLowAvgContentionSlots | 1.3.6.1.4.1.161.19.3.1.12.1.25 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Average contention slots per frame in the last 1 minute. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlLowMaxContentionSlots | 1.3.6.1.4.1.161.19.3.1.12.1.26 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Maximum possible contention slots for 1 minute. This is calculated as (((Uplink slots in a frame) + (Contention slots in a frame)) * (Number of frames in a second) * 60(seconds)). Uplink slots and contention slots in a frame depend on the frame configuration. Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlLowDownlinkAckUtilization | 1.3.6.1.4.1.161.19.3.1.12.1.27 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of downlink Canopy MAC Acknowledgment utilization in the last 1 minute. Presented in Statistics -> Frame Utilization -> Sector Utilization -> ACK. | |||||||||||||
| SfrUtlLowDownlinkBcastMcastUtilization | 1.3.6.1.4.1.161.19.3.1.12.1.28 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of downlink Broadcast/Multicast utilization in the last 1 minute. Presented in Statistics -> Frame Utilization -> Sector Utilization -> Broadcast and Multicast. | |||||||||||||
| SfrUtlLowMumimoDownlinkSectorUtilization | 1.3.6.1.4.1.161.19.3.1.12.1.29 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of MU-MIMO downlink Sector utilization in the last 1 minute. Presented in Statistics -> Frame Utilization -> Sector Utilization -> Total Utilization. MU-MIMO only. | |||||||||||||
| SfrUtlLowMumimoDownlinkMumimoUtilization | 1.3.6.1.4.1.161.19.3.1.12.1.30 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of MU-MIMO downlink utilization in the last 1 minute. Presented in Statistics -> Frame Utilization -> Sector Utilization -> MU-MIMO. MU-MIMO only. | |||||||||||||
| SfrUtlLowMumimoDownlinkSumimoUtilization | 1.3.6.1.4.1.161.19.3.1.12.1.31 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of SU-MIMO downlink utilization in the last 1 minute. Presented in Statistics -> Frame Utilization -> Sector Utilization -> SU-MIMO. MU-MIMO only. | |||||||||||||
| SfrUtlLowMumimoDownlinkMultiplexingGain | 1.3.6.1.4.1.161.19.3.1.12.1.32 | INTEGER (0..700) | RO | ||||||||||
scalar · INTEGER (0..700) · read-only · current MU-MIMO Multiplexing Gain in the last 1 minute. This compares the SU and MU usage for data and ACK allocations. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only. | |||||||||||||
| SfrUtlLowMumimoDownlinkAvgGroupSize | 1.3.6.1.4.1.161.19.3.1.12.1.33 | INTEGER (0..700) | RO | ||||||||||
scalar · INTEGER (0..700) · read-only · current Average MU-MIMO Group Size for data allocations in the last 1 minute. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only. | |||||||||||||
| SfrUtlLowDownlinkMediumPrioSlots | 1.3.6.1.4.1.161.19.3.1.12.1.34 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink medium priority traffic in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlLowDownlinkUltraHighPrioSlots | 1.3.6.1.4.1.161.19.3.1.12.1.35 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink ultra high priority traffic in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlLowDownlinkAAAMsgSlots | 1.3.6.1.4.1.161.19.3.1.12.1.36 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink Authentication and Configuration messages in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlLowUplinkMediumPrioSlots | 1.3.6.1.4.1.161.19.3.1.12.1.37 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink medium priority traffic in the last 1 minute. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlLowUplinkUltraHighPrioSlots | 1.3.6.1.4.1.161.19.3.1.12.1.38 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink ultra high priority traffic in the last 1 minute. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlLowUplinkAAAMsgSlots | 1.3.6.1.4.1.161.19.3.1.12.1.39 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink Authentication and Configuration messages in the last 1 minute. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlLowMumimoUplinkSectorUtilization | 1.3.6.1.4.1.161.19.3.1.12.1.40 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of MU-MIMO uplink Sector utilization in the last 1 minute. Presented in Statistics -> Frame Utilization -> Sector Utilization -> Total Utilization. MU-MIMO only. | |||||||||||||
| SfrUtlLowMumimoUplinkMumimoUtilization | 1.3.6.1.4.1.161.19.3.1.12.1.41 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of MU-MIMO uplink utilization in the last 1 minute. Presented in Statistics -> Frame Utilization -> Sector Utilization -> MU-MIMO. MU-MIMO only. | |||||||||||||
| SfrUtlLowMumimoUplinkSumimoUtilization | 1.3.6.1.4.1.161.19.3.1.12.1.42 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of SU-MIMO uplink utilization in the last 1 minute. Presented in Statistics -> Frame Utilization -> Sector Utilization -> SU-MIMO. MU-MIMO only. | |||||||||||||
| SfrUtlLowMumimoUplinkMultiplexingGain | 1.3.6.1.4.1.161.19.3.1.12.1.43 | INTEGER (0..700) | RO | ||||||||||
scalar · INTEGER (0..700) · read-only · current MU-MIMO Multiplexing Gain in the last 1 minute. This compares the SU and MU usage for data and ACK allocations. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only. | |||||||||||||
| SfrUtlLowDownlinkAvgGroupSizeCombined | 1.3.6.1.4.1.161.19.3.1.12.1.44 | INTEGER (0..700) | RO | ||||||||||
scalar · INTEGER (0..700) · read-only · current Average MU-MIMO Group Size for data and ACK allocations in the last 1 minute. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only. | |||||||||||||
| SfrUtlLowUplinkAvgGroupSizeCombined | 1.3.6.1.4.1.161.19.3.1.12.1.45 | INTEGER (0..700) | RO | ||||||||||
scalar · INTEGER (0..700) · read-only · current Average MU-MIMO Group Size for data and ACK allocations in the last 1 minute. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only. | |||||||||||||
| SfrUtlLowMumimoUplinkAvgGroupSize | 1.3.6.1.4.1.161.19.3.1.12.1.46 | INTEGER (0..700) | RO | ||||||||||
scalar · INTEGER (0..700) · read-only · current Average MU-MIMO Group Size for data allocations in the last 1 minute. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only. | |||||||||||||
| SfrUtlLowUplinkAckUtilization | 1.3.6.1.4.1.161.19.3.1.12.1.47 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of uplink Canopy MAC Acknowledgment utilization in the last 1 minute. Presented in Statistics -> Frame Utilization -> Sector Utilization -> ACK. | |||||||||||||
| SfrUtlLowDownlinkMumimoAckUtilization | 1.3.6.1.4.1.161.19.3.1.12.1.48 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of downlink Canopy MAC Mumimo Acknowledgment utilization in the last 1 minute. Presented in Statistics -> Frame Utilization -> Sector Utilization -> MU-MIMO ACK. | |||||||||||||
| SfrUtlLowUplinkMumimoAckUtilization | 1.3.6.1.4.1.161.19.3.1.12.1.49 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of uplink Canopy MAC Mumimo Acknowledgment utilization in the last 1 minute. Presented in Statistics -> Frame Utilization -> Sector Utilization -> MU-MIMO ACK. | |||||||||||||
| SfrUtlLowUplinkAvgSchedCycles | 1.3.6.1.4.1.161.19.3.1.12.1.50 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Engineering use only. Average number of uplink scheduling window in the last 1 minute. An average scheduling window size of a. 1 TDD cycle is expected if there is no traffic. b. 10 TDD cycles is expected on a heavily loaded system. | |||||||||||||
| SfrUtlLowDownlinkAvgSchedCycles | 1.3.6.1.4.1.161.19.3.1.12.1.51 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Engineering use only. Average number of downlink scheduling window in the last 1 minute. An average scheduling window size of a. 1 TDD cycle is expected if there is no traffic. b. 10 TDD cycles is expected on a heavily loaded system. | |||||||||||||
| SfrUtlLowAvgReservedContentionSlots | 1.3.6.1.4.1.161.19.3.1.12.1.52 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Average Reserved contention slots per frame in the last 1 minute. PMP Only. | |||||||||||||
| SfrUtlLowAvgEffectiveContentionSlots | 1.3.6.1.4.1.161.19.3.1.12.1.53 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Average Effective contention slots in the last 1 minute. Only supported for PMP 450 AP platform. Engineering use only. | |||||||||||||
| SfrUtlLowDownlink1xModSlots | 1.3.6.1.4.1.161.19.3.1.12.1.54 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink 1x modulation traffic in the last 1 minute. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlLowDownlink2xModSlots | 1.3.6.1.4.1.161.19.3.1.12.1.55 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink 2x modulation traffic in the last 1 minute. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlLowDownlink3xModSlots | 1.3.6.1.4.1.161.19.3.1.12.1.56 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink 3x modulation traffic in the last 1 minute. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlLowDownlink4xModSlots | 1.3.6.1.4.1.161.19.3.1.12.1.57 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink 4x modulation traffic in the last 1 minute. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlLowDownlink5xModSlots | 1.3.6.1.4.1.161.19.3.1.12.1.58 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink 5x modulation traffic in the last 1 minute. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlLowDownlink6xModSlots | 1.3.6.1.4.1.161.19.3.1.12.1.59 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink 6x modulation traffic in the last 1 minute. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlLowDownlink7xModSlots | 1.3.6.1.4.1.161.19.3.1.12.1.60 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink 7x modulation traffic in the last 1 minute. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlLowDownlink8xModSlots | 1.3.6.1.4.1.161.19.3.1.12.1.61 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink 8x modulation traffic in the last 1 minute. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlLowUplink1xModSlots | 1.3.6.1.4.1.161.19.3.1.12.1.62 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink 1x modulation traffic in the last 1 minute. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlLowUplink2xModSlots | 1.3.6.1.4.1.161.19.3.1.12.1.63 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink 2x modulation traffic in the last 1 minute. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlLowUplink3xModSlots | 1.3.6.1.4.1.161.19.3.1.12.1.64 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink 3x modulation traffic in the last 1 minute. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlLowUplink4xModSlots | 1.3.6.1.4.1.161.19.3.1.12.1.65 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink 4x modulation traffic in the last 1 minute. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlLowUplink5xModSlots | 1.3.6.1.4.1.161.19.3.1.12.1.66 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink 5x modulation traffic in the last 1 minute. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlLowUplink6xModSlots | 1.3.6.1.4.1.161.19.3.1.12.1.67 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink 6x modulation traffic in the last 1 minute. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlLowUplink7xModSlots | 1.3.6.1.4.1.161.19.3.1.12.1.68 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink 7x modulation traffic in the last 1 minute. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlLowUplink8xModSlots | 1.3.6.1.4.1.161.19.3.1.12.1.69 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink 8x modulation traffic in the last 1 minute. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlLowDLSpecEffExtrap | 1.3.6.1.4.1.161.19.3.1.12.1.70 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Extrapolated downlink Spectral Efficiency in the last 1 minute (Multiplied by 1000). Measured in units of user data bits per second per hertz. Divide by 1000 for actual number. Not currently supported on 450m | |||||||||||||
| SfrUtlLowDLSpecEffMax | 1.3.6.1.4.1.161.19.3.1.12.1.71 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Maximum possible downlink Spectral Efficiency in the last 1 minute (Multiplied by 1000). Measured in units of user data bits per second per hertz. Divide by 1000 for actual number. Not currently supported on 450m | |||||||||||||
| SfrUtlLowULSpecEffExtrap | 1.3.6.1.4.1.161.19.3.1.12.1.72 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Extrapolated uplink Spectral Efficiency in the last 1 minute (Multiplied by 1000). Measured in units of user data bits per second per hertz. Divide by 1000 for actual number. Not currently supported on 450m | |||||||||||||
| SfrUtlLowULSpecEffMax | 1.3.6.1.4.1.161.19.3.1.12.1.73 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Maximum possible uplink Spectral Efficiency in the last 1 minute (Multiplied by 1000). Measured in units of user data bits per second per hertz. Divide by 1000 for actual number. Not currently supported on 450m | |||||||||||||
| SfrUtlLowDLAvgFragsPerSlot | 1.3.6.1.4.1.161.19.3.1.12.1.74 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Average number of fragments per slot in the last 1 minute (Multiplied by 100). Divide by 100 for actual number. Not currently supported on 450m | |||||||||||||
| SfrUtlLowULAvgFragsPerSlot | 1.3.6.1.4.1.161.19.3.1.12.1.75 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Average number of fragments per slot in the last 1 minute (Multiplied by 100). Divide by 100 for actual number. Not currently supported on 450m | |||||||||||||
| SfrUtlLowULMissedAcksSuMimo | 1.3.6.1.4.1.161.19.3.1.12.1.76 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of missed Uplink MAC Acknowledgements in the last 1 minute. PMP only. For 450m, this is the SU-MIMO ACKs. | |||||||||||||
| SfrUtlLowULMissedAcksMuMimo | 1.3.6.1.4.1.161.19.3.1.12.1.77 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of missed Uplink MU-MIMO MAC Acknowledgements in the last 1 minute. PMP only. MU-MIMO platforms only. | |||||||||||||
| NwhispApsFrUtlStatsIntervalMedium | 1.3.6.1.4.1.161.19.3.1.12.2 | ||||||||||||
| SfrUtlMedTotalDownlinkUtilization | 1.3.6.1.4.1.161.19.3.1.12.2.1 | INTEGER | RO | 15 | |||||||||
| SfrUtlMedTotalUplinkUtilization | 1.3.6.1.4.1.161.19.3.1.12.2.2 | INTEGER | RO | 15 | |||||||||
| SfrUtlMedTotalDownlinkSlots | 1.3.6.1.4.1.161.19.3.1.12.2.3 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Total downlink data slots in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlMedDownlinkLowPrioSlots | 1.3.6.1.4.1.161.19.3.1.12.2.4 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink low priority traffic in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlMedDownlinkHiPrioSlots | 1.3.6.1.4.1.161.19.3.1.12.2.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink high priority traffic in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlMedDownlinkBcastSlots | 1.3.6.1.4.1.161.19.3.1.12.2.6 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink broadcast and multicast traffic in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlMedDownlinkAckSlots | 1.3.6.1.4.1.161.19.3.1.12.2.7 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for Downlink Canopy MAC Acknowledgements in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlMedDownlinkCntlMsgSlots | 1.3.6.1.4.1.161.19.3.1.12.2.8 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink registration and control messages in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlMedTotalUplinkSlots | 1.3.6.1.4.1.161.19.3.1.12.2.9 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Total uplink data slots in the last 5 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlMedUplinkLowPrioSlots | 1.3.6.1.4.1.161.19.3.1.12.2.10 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink low priority traffic in the last 5 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlMedUplinkHiPrioSlots | 1.3.6.1.4.1.161.19.3.1.12.2.11 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink high priority traffic in the last 5 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlMedUplinkAckSlots | 1.3.6.1.4.1.161.19.3.1.12.2.12 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for Uplink Canopy MAC Acknowledgements in the last 5 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlMedMaxDownlinkSlots | 1.3.6.1.4.1.161.19.3.1.12.2.13 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Maximum possible downlink data slots for 5 minutes. This is calculated as ((Downlink slots in a frame) * (Number of frames in a second) * 5 * 60 (seconds)). Downlink slots in a frame depends on the frame configuration. Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlMedMaxUplinkSlots | 1.3.6.1.4.1.161.19.3.1.12.2.14 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Maximum possible uplink data slots for 5 minutes. This is calculated as ((Uplink slots in a frame) * (Number of frames in a second) * 5 * 60(seconds)). Uplink slots in a frame depends on the frame configuration. Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlMedEthInDiscards | 1.3.6.1.4.1.161.19.3.1.12.2.15 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of incoming Ethernet packets discarded in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlMedEthOutDiscards | 1.3.6.1.4.1.161.19.3.1.12.2.16 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of outgoing Ethernet packets discarded in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlMedRFInDiscards | 1.3.6.1.4.1.161.19.3.1.12.2.17 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of incoming radio packets discarded in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlMedRFOutDiscards | 1.3.6.1.4.1.161.19.3.1.12.2.18 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of outgoing radio packets discarded in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlMediumIntervalBwReqPercentage | 1.3.6.1.4.1.161.19.3.1.12.2.19 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of bandwidth request received in the last 5 minutes. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic. | |||||||||||||
| SfrUtlMediumIntervalBwReqRx | 1.3.6.1.4.1.161.19.3.1.12.2.20 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of bandwidth request received in the last 5 minutes. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic. | |||||||||||||
| SfrUtlMediumIntervalBwReqMissed | 1.3.6.1.4.1.161.19.3.1.12.2.21 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of bandwidth request missed in the last 5 minutes. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic. | |||||||||||||
| SfrUtlMediumContentionSlots | 1.3.6.1.4.1.161.19.3.1.12.2.22 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of scheduled contention slots available in the last 5 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlMediumAvgDownlinkSlots | 1.3.6.1.4.1.161.19.3.1.12.2.23 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Average downlink data slots per frame in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlMediumAvgUplinkSlots | 1.3.6.1.4.1.161.19.3.1.12.2.24 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Average uplink data slots per frame in the last 5 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlMediumAvgContentionSlots | 1.3.6.1.4.1.161.19.3.1.12.2.25 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Average contention slots per frame in the last 5 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlMediumMaxContentionSlots | 1.3.6.1.4.1.161.19.3.1.12.2.26 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Maximum possible contention slots for 5 minutes. This is calculated as (((Uplink slots in a frame) + (Contention slots in a frame)) * (Number of frames in a second) * 5 * 60(seconds)). Uplink slots and contention slots in a frame depend on the frame configuration. Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlMedDownlinkAckUtilization | 1.3.6.1.4.1.161.19.3.1.12.2.27 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of downlink Canopy MAC Acknowledgment utilization in the last 5 minutes. Presented in Statistics -> Frame Utilization -> Sector Utilization -> ACK. | |||||||||||||
| SfrUtlMedDownlinkBcastMcastUtilization | 1.3.6.1.4.1.161.19.3.1.12.2.28 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of downlink Broadcast/Multicast utilization in the last 5 minutes. Presented in Statistics -> Frame Utilization -> Sector Utilization -> Broadcast and Multicast. | |||||||||||||
| SfrUtlMedMumimoDownlinkSectorUtilization | 1.3.6.1.4.1.161.19.3.1.12.2.29 | INTEGER | RO | 45 | |||||||||
scalar · INTEGER · read-only · current Percentage of MU-MIMO downlink Sector utilization in the last 5 minutes. Presented in Statistics -> Frame Utilization -> Sector Utilization -> Total Utilization. MU-MIMO only. Example values from LibreNMS test devices
| |||||||||||||
| SfrUtlMedMumimoDownlinkMumimoUtilization | 1.3.6.1.4.1.161.19.3.1.12.2.30 | INTEGER | RO | 2 | |||||||||
scalar · INTEGER · read-only · current Percentage of MU-MIMO downlink utilization in the last 5 minutes. Presented in Statistics -> Frame Utilization -> Sector Utilization -> MU-MIMO. MU-MIMO only. Example values from LibreNMS test devices
| |||||||||||||
| SfrUtlMedMumimoDownlinkSumimoUtilization | 1.3.6.1.4.1.161.19.3.1.12.2.31 | INTEGER | RO | 39 | |||||||||
scalar · INTEGER · read-only · current Percentage of SU-MIMO downlink utilization in the last 5 minutes. Presented in Statistics -> Frame Utilization -> Sector Utilization -> SU-MIMO. MU-MIMO only. Example values from LibreNMS test devices
| |||||||||||||
| SfrUtlMedMumimoDownlinkMultiplexingGain | 1.3.6.1.4.1.161.19.3.1.12.2.32 | INTEGER (0..700) | RO | ||||||||||
scalar · INTEGER (0..700) · read-only · current MU-MIMO Multiplexing Gain in the last 5 minutes. This compares the SU and MU usage for data and ACK allocations. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only. | |||||||||||||
| SfrUtlMedMumimoDownlinkAvgGroupSize | 1.3.6.1.4.1.161.19.3.1.12.2.33 | INTEGER (0..700) | RO | ||||||||||
scalar · INTEGER (0..700) · read-only · current Average MU-MIMO Group Size for data allocations in the last 5 minutes. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only. | |||||||||||||
| SfrUtlMedDownlinkMediumPrioSlots | 1.3.6.1.4.1.161.19.3.1.12.2.34 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink medium priority traffic in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlMedDownlinkUltraHighPrioSlots | 1.3.6.1.4.1.161.19.3.1.12.2.35 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink ultra high priority traffic in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlMedDownlinkAAAMsgSlots | 1.3.6.1.4.1.161.19.3.1.12.2.36 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink Authentication and Configuration messages in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlMedUplinkMediumPrioSlots | 1.3.6.1.4.1.161.19.3.1.12.2.37 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink medium priority traffic in the last 5 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlMedUplinkUltraHighPrioSlots | 1.3.6.1.4.1.161.19.3.1.12.2.38 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink ultra high priority traffic in the last 5 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlMedUplinkAAAMsgSlots | 1.3.6.1.4.1.161.19.3.1.12.2.39 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink Authentication and Configuration messages in the last 5 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlMedMumimoUplinkSectorUtilization | 1.3.6.1.4.1.161.19.3.1.12.2.40 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of MU-MIMO uplink Sector utilization in the last 5 minutes. Presented in Statistics -> Frame Utilization -> Sector Utilization -> Total Utilization. MU-MIMO only. | |||||||||||||
| SfrUtlMedMumimoUplinkMumimoUtilization | 1.3.6.1.4.1.161.19.3.1.12.2.41 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of MU-MIMO Uplink utilization in the last 5 minutes. Presented in Statistics -> Frame Utilization -> Sector Utilization -> MU-MIMO. MU-MIMO only. | |||||||||||||
| SfrUtlMedMumimoUplinkSumimoUtilization | 1.3.6.1.4.1.161.19.3.1.12.2.42 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of SU-MIMO uplink utilization in the last 5 minutes. Presented in Statistics -> Frame Utilization -> Sector Utilization -> SU-MIMO. MU-MIMO only. | |||||||||||||
| SfrUtlMedMumimoUplinkMultiplexingGain | 1.3.6.1.4.1.161.19.3.1.12.2.43 | INTEGER (0..700) | RO | ||||||||||
scalar · INTEGER (0..700) · read-only · current MU-MIMO Multiplexing Gain in the last 5 minutes. This compares the SU and MU usage for data and ACK allocations. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only. | |||||||||||||
| SfrUtlMedDownlinkAvgGroupSizeCombined | 1.3.6.1.4.1.161.19.3.1.12.2.44 | INTEGER (0..700) | RO | ||||||||||
scalar · INTEGER (0..700) · read-only · current Average MU-MIMO Group Size for data and ACK allocations in the last 5 minutes. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only. | |||||||||||||
| SfrUtlMedUplinkAvgGroupSizeCombined | 1.3.6.1.4.1.161.19.3.1.12.2.45 | INTEGER (0..700) | RO | ||||||||||
scalar · INTEGER (0..700) · read-only · current Average MU-MIMO Group Size for data and ACK allocations in the last 5 minutes. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only. | |||||||||||||
| SfrUtlMedMumimoUplinkAvgGroupSize | 1.3.6.1.4.1.161.19.3.1.12.2.46 | INTEGER (0..700) | RO | ||||||||||
scalar · INTEGER (0..700) · read-only · current Average MU-MIMO Group Size for data allocations in the last 5 minutes. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only. | |||||||||||||
| SfrUtlMedUplinkAckUtilization | 1.3.6.1.4.1.161.19.3.1.12.2.47 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of uplink Canopy MAC Acknowledgment utilization in the last 5 minutes. Presented in Statistics -> Frame Utilization -> Sector Utilization -> ACK. | |||||||||||||
| SfrUtlMedDownlinkMumimoAckUtilization | 1.3.6.1.4.1.161.19.3.1.12.2.48 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of downlink Canopy MAC Mumimo Acknowledgment utilization in the last 5 minutes. Presented in Statistics -> Frame Utilization -> Sector Utilization -> MU-MIMO ACK. | |||||||||||||
| SfrUtlMedUplinkMumimoAckUtilization | 1.3.6.1.4.1.161.19.3.1.12.2.49 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of uplink Canopy MAC Mumimo Acknowledgment utilization in the last 5 minutes. Presented in Statistics -> Frame Utilization -> Sector Utilization -> MU-MIMO ACK. | |||||||||||||
| SfrUtlMedUplinkAvgSchedCycles | 1.3.6.1.4.1.161.19.3.1.12.2.50 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Engineering use only. Average number of uplink scheduling window cycles in the last 5 minutes. An average scheduling window size of a. 1 TDD cycle is expected if there is no traffic. b. 10 TDD cycles is expected on a heavily loaded system. | |||||||||||||
| SfrUtlMedDownlinkAvgSchedCycles | 1.3.6.1.4.1.161.19.3.1.12.2.51 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Engineering use only. Average nunmber of downlink scheduling window cycles in the last 5 minutes An average scheduling window size of a. 1 TDD cycle is expected if there is no traffic. b. 10 TDD cycles is expected on a heavily loaded system. | |||||||||||||
| SfrUtlMediumAvgReservedContentionSlots | 1.3.6.1.4.1.161.19.3.1.12.2.52 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Average Reserved contention slots per frame in the last 5 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlMediumAvgEffectiveContentionSlots | 1.3.6.1.4.1.161.19.3.1.12.2.53 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Average Effective contention slots in the last 5 minutes. Only supported for PMP 450 AP platform. Engineering use only. | |||||||||||||
| SfrUtlMedDownlink1xModSlots | 1.3.6.1.4.1.161.19.3.1.12.2.54 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink 1x modulation traffic in the last 5 minutes. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlMedDownlink2xModSlots | 1.3.6.1.4.1.161.19.3.1.12.2.55 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink 2x modulation traffic in the last 5 minutes. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlMedDownlink3xModSlots | 1.3.6.1.4.1.161.19.3.1.12.2.56 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink 3x modulation traffic in the last 5 minutes. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlMedDownlink4xModSlots | 1.3.6.1.4.1.161.19.3.1.12.2.57 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink 4x modulation traffic in the last 5 minutes. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlMedDownlink5xModSlots | 1.3.6.1.4.1.161.19.3.1.12.2.58 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink 5x modulation traffic in the last 5 minutes. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlMedDownlink6xModSlots | 1.3.6.1.4.1.161.19.3.1.12.2.59 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink 6x modulation traffic in the last 5 minutes. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlMedDownlink7xModSlots | 1.3.6.1.4.1.161.19.3.1.12.2.60 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink 7x modulation traffic in the last 5 minutes. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlMedDownlink8xModSlots | 1.3.6.1.4.1.161.19.3.1.12.2.61 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink 8x modulation traffic in the last 5 minutes. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlMedUplink1xModSlots | 1.3.6.1.4.1.161.19.3.1.12.2.62 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink 1x modulation traffic in the last 5 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlMedUplink2xModSlots | 1.3.6.1.4.1.161.19.3.1.12.2.63 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink 2x modulation traffic in the last 5 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlMedUplink3xModSlots | 1.3.6.1.4.1.161.19.3.1.12.2.64 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink 3x modulation traffic in the last 5 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlMedUplink4xModSlots | 1.3.6.1.4.1.161.19.3.1.12.2.65 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink 4x modulation traffic in the last 5 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlMedUplink5xModSlots | 1.3.6.1.4.1.161.19.3.1.12.2.66 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink 5x modulation traffic in the last 5 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlMedUplink6xModSlots | 1.3.6.1.4.1.161.19.3.1.12.2.67 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink 6x modulation traffic in the last 5 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlMedUplink7xModSlots | 1.3.6.1.4.1.161.19.3.1.12.2.68 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink 7x modulation traffic in the last 5 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlMedUplink8xModSlots | 1.3.6.1.4.1.161.19.3.1.12.2.69 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink 8x modulation traffic in the last 5 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlMediumDLSpecEffExtrap | 1.3.6.1.4.1.161.19.3.1.12.2.70 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Extrapolated downlink Spectral Efficiency in the last 5 minute (Multiplied by 1000). Measured in units of user data bits per second per hertz. Divide by 1000 for actual number. Not currently supported on 450m | |||||||||||||
| SfrUtlMediumDLSpecEffMax | 1.3.6.1.4.1.161.19.3.1.12.2.71 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Maximum possible downlink Spectral Efficiency in the last 5 minute (Multiplied by 1000). Measured in units of user data bits per second per hertz. Divide by 1000 for actual number. Not currently supported on 450m | |||||||||||||
| SfrUtlMediumULSpecEffExtrap | 1.3.6.1.4.1.161.19.3.1.12.2.72 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Extrapolated uplink Spectral Efficiency in the last 5 minute (Multiplied by 1000). Measured in units of user data bits per second per hertz. Divide by 1000 for actual number. Not currently supported on 450m | |||||||||||||
| SfrUtlMediumULSpecEffMax | 1.3.6.1.4.1.161.19.3.1.12.2.73 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Maximum possible uplink Spectral Efficiency in the last 5 minute (Multiplied by 1000). Measured in units of user data bits per second per hertz. Divide by 1000 for actual number. Not currently supported on 450m | |||||||||||||
| SfrUtlMediumDLAvgFragsPerSlot | 1.3.6.1.4.1.161.19.3.1.12.2.74 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Average number of fragments per slot in the last 5 minute (Multiplied by 100). Divide by 100 for actual number. Not currently supported on 450m | |||||||||||||
| SfrUtlMediumULAvgFragsPerSlot | 1.3.6.1.4.1.161.19.3.1.12.2.75 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Average number of fragments per slot in the last 5 minute (Multiplied by 100). Divide by 100 for actual number. Not currently supported on 450m | |||||||||||||
| SfrUtlMediumULMissedAcksSuMimo | 1.3.6.1.4.1.161.19.3.1.12.2.76 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of missed Uplink MAC Acknowledgements in the last 5 minutes. PMP only. For 450m, this is the SU-MIMO ACKs. | |||||||||||||
| SfrUtlMediumULMissedAcksMuMimo | 1.3.6.1.4.1.161.19.3.1.12.2.77 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of missed Uplink MU-MIMO MAC Acknowledgements in the last 5 minutes. PMP only. MU-MIMO platforms only. | |||||||||||||
| NwhispApsFrUtlStatsIntervalHigh | 1.3.6.1.4.1.161.19.3.1.12.3 | ||||||||||||
| SfrUtlHighTotalDownlinkUtilization | 1.3.6.1.4.1.161.19.3.1.12.3.1 | INTEGER | RO | 9 | |||||||||
| SfrUtlHighTotalUplinkUtilization | 1.3.6.1.4.1.161.19.3.1.12.3.2 | INTEGER | RO | 10 | |||||||||
| SfrUtlHighTotalDownlinkSlots | 1.3.6.1.4.1.161.19.3.1.12.3.3 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Total downlink data slots in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlHighDownlinkLowPrioSlots | 1.3.6.1.4.1.161.19.3.1.12.3.4 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink low priority traffic in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlHighDownlinkHiPrioSlots | 1.3.6.1.4.1.161.19.3.1.12.3.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink high priority traffic in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlHighDownlinkBcastSlots | 1.3.6.1.4.1.161.19.3.1.12.3.6 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink broadcast and multicast traffic in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlHighDownlinkAckSlots | 1.3.6.1.4.1.161.19.3.1.12.3.7 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for Downlink Canopy MAC Acknowledgements in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlHighDownlinkCntlMsgSlots | 1.3.6.1.4.1.161.19.3.1.12.3.8 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink registration and control messages in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlHighTotalUplinkSlots | 1.3.6.1.4.1.161.19.3.1.12.3.9 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Total uplink data slots in the last 15 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlHighUplinkLowPrioSlots | 1.3.6.1.4.1.161.19.3.1.12.3.10 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink low priority traffic in the last 15 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlHighUplinkHiPrioSlots | 1.3.6.1.4.1.161.19.3.1.12.3.11 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink high priority traffic in the last 15 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlHighUplinkAckSlots | 1.3.6.1.4.1.161.19.3.1.12.3.12 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for Uplink Canopy MAC Acknowledgements in the last 15 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlHighMaxDownlinkSlots | 1.3.6.1.4.1.161.19.3.1.12.3.13 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Maximum possible downlink data slots for 15 minutes. This is calculated as ((Downlink slots in a frame) * (Number of frames in a second) * 15 * 60(seconds)). Downlink slots in a frame depends on the frame configuration. Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlHighMaxUplinkSlots | 1.3.6.1.4.1.161.19.3.1.12.3.14 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Maximum possible uplink data slots for 15 minutes. This is calculated as ((Uplink slots in a frame) * (Number of frames in a second) * 15 * 60(seconds)). Uplink slots in a frame depends on the frame configuration. Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlHighEthInDiscards | 1.3.6.1.4.1.161.19.3.1.12.3.15 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of incoming Ethernet packets discarded in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlHighEthOutDiscards | 1.3.6.1.4.1.161.19.3.1.12.3.16 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of outgoing Ethernet packets discarded in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlHighRFInDiscards | 1.3.6.1.4.1.161.19.3.1.12.3.17 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of incoming radio packets discarded in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlHighRFOutDiscards | 1.3.6.1.4.1.161.19.3.1.12.3.18 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of outgoing radio packets discarded in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlHighIntervalBwReqPercentage | 1.3.6.1.4.1.161.19.3.1.12.3.19 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of bandwidth request received in the last 15 minutes. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic. | |||||||||||||
| SfrUtlHighIntervalBwReqRx | 1.3.6.1.4.1.161.19.3.1.12.3.20 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of bandwidth request received in the last 15 minutes. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic. | |||||||||||||
| SfrUtlHighIntervalBwReqMissed | 1.3.6.1.4.1.161.19.3.1.12.3.21 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of bandwidth request missed in the last 15 minutes. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic. | |||||||||||||
| SfrUtlHighContentionSlots | 1.3.6.1.4.1.161.19.3.1.12.3.22 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of scheduled contention slots available in the last 15 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlHighAvgDownlinkSlots | 1.3.6.1.4.1.161.19.3.1.12.3.23 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Average downlink data slots per frame in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlHighAvgUplinkSlots | 1.3.6.1.4.1.161.19.3.1.12.3.24 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Average uplink data slots per frame in the last 15 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlHighAvgContentionSlots | 1.3.6.1.4.1.161.19.3.1.12.3.25 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Average contention slots per frame in the last 15 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlHighMaxContentionSlots | 1.3.6.1.4.1.161.19.3.1.12.3.26 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Maximum possible contention slots for 15 minutes. This is calculated as (((Uplink slots in a frame) + (Contention slots in a frame)) * (Number of frames in a second) * 15 * 60(seconds)). Uplink slots and contention slots in a frame depend on the frame configuration. Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlHighDownlinkAckUtilization | 1.3.6.1.4.1.161.19.3.1.12.3.27 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of downlink Canopy MAC Acknowledgment utilization in the last 15 minutes. Presented in Statistics -> Frame Utilization -> Sector Utilization -> ACK. MU-MIMO only. | |||||||||||||
| SfrUtlHighDownlinkBcastMcastUtilization | 1.3.6.1.4.1.161.19.3.1.12.3.28 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of downlink Broadcast/Multicast utilization in the last 15 minutes. Presented in Statistics -> Frame Utilization -> Sector Utilization -> Broadcast and Multicast. | |||||||||||||
| SfrUtlHighMumimoDownlinkSectorUtilization | 1.3.6.1.4.1.161.19.3.1.12.3.29 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of MU-MIMO downlink Sector utilization in the last 15 minutes. Presented in Statistics -> Frame Utilization -> Sector Utilization -> Total Utilization. MU-MIMO only. | |||||||||||||
| SfrUtlHighMumimoDownlinkMumimoUtilization | 1.3.6.1.4.1.161.19.3.1.12.3.30 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of MU-MIMO downlink utilization in the last 15 minutes. Presented in Statistics -> Frame Utilization -> Sector Utilization -> MU-MIMO. MU-MIMO only. | |||||||||||||
| SfrUtlHighMumimoDownlinkSumimoUtilization | 1.3.6.1.4.1.161.19.3.1.12.3.31 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of SU-MIMO downlink utilization in the last 15 minutes. Presented in Statistics -> Frame Utilization -> Sector Utilization -> SU-MIMO. MU-MIMO only. | |||||||||||||
| SfrUtlHighMumimoDownlinkMultiplexingGain | 1.3.6.1.4.1.161.19.3.1.12.3.32 | INTEGER (0..700) | RO | ||||||||||
scalar · INTEGER (0..700) · read-only · current MU-MIMO Multiplexing Gain in the last 15 minutes. This compares the SU and MU usage for data and ACK allocations. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only. | |||||||||||||
| SfrUtlHighMumimoDownlinkAvgGroupSize | 1.3.6.1.4.1.161.19.3.1.12.3.33 | INTEGER (0..700) | RO | ||||||||||
scalar · INTEGER (0..700) · read-only · current Average MU-MIMO Group Size for data allocations in the last 15 minutes. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only. | |||||||||||||
| SfrUtlHighDownlinkMediumPrioSlots | 1.3.6.1.4.1.161.19.3.1.12.3.34 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink medium priority traffic in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlHighDownlinkUltraHighPrioSlots | 1.3.6.1.4.1.161.19.3.1.12.3.35 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink ultra high priority traffic in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlHighDownlinkAAAMsgSlots | 1.3.6.1.4.1.161.19.3.1.12.3.36 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink Authentication and Configuration messages in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |||||||||||||
| SfrUtlHighUplinkMediumPrioSlots | 1.3.6.1.4.1.161.19.3.1.12.3.37 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink medium priority traffic in the last 15 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlHighUplinkUltraHighPrioSlots | 1.3.6.1.4.1.161.19.3.1.12.3.38 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink ultra high priority traffic in the last 15 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlHighUplinkAAAMsgSlots | 1.3.6.1.4.1.161.19.3.1.12.3.39 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink Authentication and Configuration messages in the last 15 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlHighMumimoUplinkSectorUtilization | 1.3.6.1.4.1.161.19.3.1.12.3.40 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of MU-MIMO Uplink Sector utilization in the last 15 minutes. Presented in Statistics -> Frame Utilization -> Sector Utilization -> Total Utilization. MU-MIMO only. | |||||||||||||
| SfrUtlHighMumimoUplinkMumimoUtilization | 1.3.6.1.4.1.161.19.3.1.12.3.41 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of MU-MIMO uplink utilization in the last 15 minutes. Presented in Statistics -> Frame Utilization -> Sector Utilization -> MU-MIMO. MU-MIMO only. | |||||||||||||
| SfrUtlHighMumimoUplinkSumimoUtilization | 1.3.6.1.4.1.161.19.3.1.12.3.42 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of SU-MIMO uplink utilization in the last 15 minutes. Presented in Statistics -> Frame Utilization -> Sector Utilization -> SU-MIMO. MU-MIMO only. | |||||||||||||
| SfrUtlHighMumimoUplinkMultiplexingGain | 1.3.6.1.4.1.161.19.3.1.12.3.43 | INTEGER (0..700) | RO | ||||||||||
scalar · INTEGER (0..700) · read-only · current MU-MIMO Multiplexing Gain in the last 15 minutes. This compares the SU and MU usage for data and ACK allocations. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only. | |||||||||||||
| SfrUtlHighDownlinkAvgGroupSizeCombined | 1.3.6.1.4.1.161.19.3.1.12.3.44 | INTEGER (0..700) | RO | ||||||||||
scalar · INTEGER (0..700) · read-only · current Average MU-MIMO Group Size for data and ACK allocations in the last 15 minutes. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only. | |||||||||||||
| SfrUtlHighUplinkAvgGroupSizeCombined | 1.3.6.1.4.1.161.19.3.1.12.3.45 | INTEGER (0..700) | RO | ||||||||||
scalar · INTEGER (0..700) · read-only · current Average MU-MIMO Group Size for data and ACK allocations in the last 15 minutes. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only. | |||||||||||||
| SfrUtlHighMumimoiUplinkAvgGroupSize | 1.3.6.1.4.1.161.19.3.1.12.3.46 | INTEGER (0..700) | RO | ||||||||||
scalar · INTEGER (0..700) · read-only · current Average MU-MIMO Group Size for data allocations in the last 15 minutes. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only. | |||||||||||||
| SfrUtlHighUplinkAckUtilization | 1.3.6.1.4.1.161.19.3.1.12.3.47 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of uplink Canopy MAC Acknowledgment utilization in the last 15 minutes. Presented in Statistics -> Frame Utilization -> Sector Utilization -> ACK. MU-MIMO only. | |||||||||||||
| SfrUtlHighDownlinkMumimoAckUtilization | 1.3.6.1.4.1.161.19.3.1.12.3.48 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of downlink Canopy MAC Mumimo Acknowledgment utilization in the last 15 minutes. Presented in Statistics -> Frame Utilization -> Sector Utilization -> MU-MIMO ACK. | |||||||||||||
| SfrUtlHighUplinkMumimoAckUtilization | 1.3.6.1.4.1.161.19.3.1.12.3.49 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Percentage of uplink Canopy MAC Mumimo Acknowledgment utilization in the last 15 minutes. Presented in Statistics -> Frame Utilization -> Sector Utilization -> MU-MIMO ACK. | |||||||||||||
| SfrUtlHighUplinkAvgSchedCycles | 1.3.6.1.4.1.161.19.3.1.12.3.50 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Engineering use only. Average number of uplink scheduling window cycles in the last 15 minutes. An average scheduling window size of a. 1 TDD cycle is expected if there is no traffic. b. 10 TDD cycles is expected on a heavily loaded system. | |||||||||||||
| SfrUtlHighDownlinkAvgSchedCycles | 1.3.6.1.4.1.161.19.3.1.12.3.51 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Engineering use only. Average number of downlink scheduling window cycles in the last 15 minutes An average scheduling window size of a. 1 TDD cycle is expected if there is no traffic. b. 10 TDD cycles is expected on a heavily loaded system. | |||||||||||||
| SfrUtlHighAvgReservedContentionSlots | 1.3.6.1.4.1.161.19.3.1.12.3.52 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Average Reserved contention slots per frame in the last 15 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlHighAvgEffectiveContentionSlots | 1.3.6.1.4.1.161.19.3.1.12.3.53 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Average Effective contention slots in the last 15 minutes. Only supported for PMP 450 AP platform. Engineering use only. | |||||||||||||
| SfrUtlHighDownlink1xModSlots | 1.3.6.1.4.1.161.19.3.1.12.3.54 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink 1x modulation traffic in the last 15 minutes. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlHighDownlink2xModSlots | 1.3.6.1.4.1.161.19.3.1.12.3.55 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink 2x modulation traffic in the last 15 minutes. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlHighDownlink3xModSlots | 1.3.6.1.4.1.161.19.3.1.12.3.56 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink 3x modulation traffic in the last 15 minutes. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlHighDownlink4xModSlots | 1.3.6.1.4.1.161.19.3.1.12.3.57 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink 4x modulation traffic in the last 15 minutes. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlHighDownlink5xModSlots | 1.3.6.1.4.1.161.19.3.1.12.3.58 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink 5x modulation traffic in the last 15 minutes. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlHighDownlink6xModSlots | 1.3.6.1.4.1.161.19.3.1.12.3.59 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink 6x modulation traffic in the last 15 minutes. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlHighDownlink7xModSlots | 1.3.6.1.4.1.161.19.3.1.12.3.60 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink 7x modulation traffic in the last 15 minutes. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlHighDownlink8xModSlots | 1.3.6.1.4.1.161.19.3.1.12.3.61 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for downlink 8x modulation traffic in the last 15 minutes. Only applies to PMP AP and Backhauls. Not currently supported on 450m | |||||||||||||
| SfrUtlHighUplink1xModSlots | 1.3.6.1.4.1.161.19.3.1.12.3.62 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink 1x modulation traffic in the last 15 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlHighUplink2xModSlots | 1.3.6.1.4.1.161.19.3.1.12.3.63 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink 2x modulation traffic in the last 15 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlHighUplink3xModSlots | 1.3.6.1.4.1.161.19.3.1.12.3.64 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink 3x modulation traffic in the last 15 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlHighUplink4xModSlots | 1.3.6.1.4.1.161.19.3.1.12.3.65 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink 4x modulation traffic in the last 15 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlHighUplink5xModSlots | 1.3.6.1.4.1.161.19.3.1.12.3.66 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink 5x modulation traffic in the last 15 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlHighUplink6xModSlots | 1.3.6.1.4.1.161.19.3.1.12.3.67 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink 6x modulation traffic in the last 15 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlHighUplink7xModSlots | 1.3.6.1.4.1.161.19.3.1.12.3.68 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink 7x modulation traffic in the last 15 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlHighUplink8xModSlots | 1.3.6.1.4.1.161.19.3.1.12.3.69 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of data slots used for uplink 8x modulation traffic in the last 15 minutes. Only supported for PMP 450 AP platform. | |||||||||||||
| SfrUtlHighDLSpecEffExtrap | 1.3.6.1.4.1.161.19.3.1.12.3.70 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Extrapolated downlink Spectral Efficiency in the last 15 minute (Multiplied by 1000). Measured in units of user data bits per second per hertz. Divide by 1000 for actual number. Not currently supported on 450m | |||||||||||||
| SfrUtlHighDLSpecEffMax | 1.3.6.1.4.1.161.19.3.1.12.3.71 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Maximum possible downlink Spectral Efficiency in the last 15 minute (Multiplied by 1000). Measured in units of user data bits per second per hertz. Divide by 1000 for actual number. Not currently supported on 450m | |||||||||||||
| SfrUtlHighULSpecEffExtrap | 1.3.6.1.4.1.161.19.3.1.12.3.72 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Extrapolated uplink Spectral Efficiency in the last 15 minute (Multiplied by 1000). Measured in units of user data bits per second per hertz. Divide by 1000 for actual number. Not currently supported on 450m | |||||||||||||
| SfrUtlHighULSpecEffMax | 1.3.6.1.4.1.161.19.3.1.12.3.73 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Maximum possible uplink Spectral Efficiency in the last 15 minute (Multiplied by 1000). Measured in units of user data bits per second per hertz. Divide by 1000 for actual number. Not currently supported on 450m | |||||||||||||
| SfrUtlHighDLAvgFragsPerSlot | 1.3.6.1.4.1.161.19.3.1.12.3.74 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Average number of fragments per slot in the last 15 minute (Multiplied by 100). Divide by 100 for actual number. Not currently supported on 450m | |||||||||||||
| SfrUtlHighULAvgFragsPerSlot | 1.3.6.1.4.1.161.19.3.1.12.3.75 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Average number of fragments per slot in the last 15 minute (Multiplied by 100). Divide by 100 for actual number. Not currently supported on 450m | |||||||||||||
| SfrUtlHighULMissedAcksSuMimo | 1.3.6.1.4.1.161.19.3.1.12.3.76 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of missed Uplink MAC Acknowledgements in the last 15 minutes. PMP only. For 450m, this is the SU-MIMO ACKs. | |||||||||||||
| SfrUtlHighULMissedAcksMuMimo | 1.3.6.1.4.1.161.19.3.1.12.3.77 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of missed Uplink MU-MIMO MAC Acknowledgements in the last 15 minutes. PMP only. MU-MIMO platforms only. | |||||||||||||
| TwhispApsFrUtlStatsMumimoSpatialTable | 1.3.6.1.4.1.161.19.3.1.12.4 | NA | |||||||||||
table · not-accessible · current MU-MIMO Spatial Utilization Metrics. | |||||||||||||
| RwhispApsFrUtlStatsMumimoSpatialEntry | 1.3.6.1.4.1.161.19.3.1.12.4.1 | NA | |||||||||||
row · not-accessible · current MU-MIMO Spatial Utilization Metrics. | |||||||||||||
| CfrUtlMumimoDownlinkUtilizationSfBin | 1.3.6.1.4.1.161.19.3.1.12.4.1.1 | INTEGER (0..32) | RO | ||||||||||
column · INTEGER (0..32) · read-only · current Spatial Frequency Bin. MU-MIMO only. | |||||||||||||
| CfrUtlMumimoDownlinkUtilizationSfRange | 1.3.6.1.4.1.161.19.3.1.12.4.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Spatial Frequency Range. MU-MIMO only. | |||||||||||||
| CfrUtlMumimoDownlinkUtilizationAzimuth | 1.3.6.1.4.1.161.19.3.1.12.4.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Azimuth Ranges per Spatial Frequency bin. MU-MIMO only. | |||||||||||||
| CfrUtlMumimoDownlinkUtilizationVcRange | 1.3.6.1.4.1.161.19.3.1.12.4.1.4 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current VCs in Spatial Frequency Range. MU-MIMO only. | |||||||||||||
| CfrUtlMumimoDownlinkInstantaneousUtilization | 1.3.6.1.4.1.161.19.3.1.12.4.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Instantanous MU-MIMO downlink utilization. This updates every 500ms. MU-MIMO only. | |||||||||||||
| CfrUtlLowTotalMumimoDownlinkUtilization | 1.3.6.1.4.1.161.19.3.1.12.4.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Percentage of total MU-MIMO downlink utilization in the last 1 minute. MU-MIMO only. | |||||||||||||
| CfrUtlMedTotalMumimoDownlinkUtilization | 1.3.6.1.4.1.161.19.3.1.12.4.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Percentage of total MU-MIMO downlink utilization in the last 5 minutes. MU-MIMO only. | |||||||||||||
| CfrUtlHighTotalMumimoDownlinkUtilization | 1.3.6.1.4.1.161.19.3.1.12.4.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Percentage of total MU-MIMO downlink utilization in the last 15 minutes. MU-MIMO only. | |||||||||||||
| CfrUtlLowMaxMumimoDownlinkUtilization | 1.3.6.1.4.1.161.19.3.1.12.4.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Maximum MU-MIMO downlink utilization in the last 1 minute. MU-MIMO only. | |||||||||||||
| CfrUtlMedMaxMumimoDownlinkUtilization | 1.3.6.1.4.1.161.19.3.1.12.4.1.10 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Maximum MU-MIMO downlink utilization in the last 5 minutes. MU-MIMO only. | |||||||||||||
| CfrUtlHighMaxMumimoDownlinkUtilization | 1.3.6.1.4.1.161.19.3.1.12.4.1.11 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Maximum MU-MIMO downlink utilization in the last 15 minutes. MU-MIMO only. | |||||||||||||
| CfrUtlLowMinMumimoDownlinkUtilization | 1.3.6.1.4.1.161.19.3.1.12.4.1.12 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Minimum MU-MIMO downlink utilization in the last 1 minute. MU-MIMO only. | |||||||||||||
| CfrUtlMedMinMumimoDownlinkUtilization | 1.3.6.1.4.1.161.19.3.1.12.4.1.13 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Minimum MU-MIMO downlink utilization in the last 5 minutes. MU-MIMO only. | |||||||||||||
| CfrUtlHighMinMumimoDownlinkUtilization | 1.3.6.1.4.1.161.19.3.1.12.4.1.14 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Minimum MU-MIMO downlink utilization in the last 15 minutes. MU-MIMO only. | |||||||||||||
| CfrUtlMumimoDownlinkUtilizationLUIDRange | 1.3.6.1.4.1.161.19.3.1.12.4.1.15 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current LUIDs in Spatial Frequency Range. MU-MIMO only. | |||||||||||||
| TwhispApsFrUtlStatsMumimoDistributionTable | 1.3.6.1.4.1.161.19.3.1.12.5 | NA | |||||||||||
table · not-accessible · current MU-MIMO Distribution Metrics. | |||||||||||||
| RwhispApsFrUtlStatsMumimoDistributionEntry | 1.3.6.1.4.1.161.19.3.1.12.5.1 | NA | |||||||||||
row · not-accessible · current MU-MIMO Distribution Metrics. | |||||||||||||
| CfrUtlMumimoDownlinkDistributionIndex | 1.3.6.1.4.1.161.19.3.1.12.5.1.1 | INTEGER (0..9) | RO | ||||||||||
column · INTEGER (0..9) · read-only · current MU-MIMO downlink Distribution Table Index. MU-MIMO only. | |||||||||||||
| CfrUtlMumimoDownlinkDistributionGroup | 1.3.6.1.4.1.161.19.3.1.12.5.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current MU-MIMO downlink Distribution Group. MU-MIMO only. | |||||||||||||
| CfrUtlMumimoDownlinkDistributionVc | 1.3.6.1.4.1.161.19.3.1.12.5.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current MU-MIMO downlink VC Distribution. MU-MIMO only. | |||||||||||||
| CfrUtlMumimoDownlinkDistributionMedianSlotCount | 1.3.6.1.4.1.161.19.3.1.12.5.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current MU-MIMO downlink Median Slot Count Distribution. MU-MIMO only. | |||||||||||||
| CfrUtlMumimoDownlinkDistributionLUID | 1.3.6.1.4.1.161.19.3.1.12.5.1.5 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current MU-MIMO downlink LUID Distribution. MU-MIMO only. | |||||||||||||
| NwhispApsLQI | 1.3.6.1.4.1.161.19.3.1.13 | ||||||||||||
| TwhispApsLQILowInterval | 1.3.6.1.4.1.161.19.3.1.13.1 | NA | |||||||||||
table · not-accessible · current Link Quality Indicator one minute interval table. | |||||||||||||
| RwhispApsLQILowIntervalEntry | 1.3.6.1.4.1.161.19.3.1.13.1.1 | NA | |||||||||||
row · not-accessible · current Link Quality Indicator for one minute Interval entry.
| |||||||||||||
| ClqiLowLinkLUID | 1.3.6.1.4.1.161.19.3.1.13.1.1.1 | INTEGER (2..239) | RO | ||||||||||
column · INTEGER (2..239) · read-only · current Logical User Identfication (LUID) number | |||||||||||||
| ClqiLowLQI | 1.3.6.1.4.1.161.19.3.1.13.1.1.2 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current Link Quality Indicator for one minute interval. Ranges from 0 to 100 where 100 is the best. It's calculated based on receive power, modulation rate, reregistrations and beacon/map percentage. | |||||||||||||
| ClqiLowDownlinkQualityIndex | 1.3.6.1.4.1.161.19.3.1.13.1.1.3 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current Downlink Quality Index for one minute interval in percentage. 100% is best quality | |||||||||||||
| ClqiLowDownlinkAverageActualRate | 1.3.6.1.4.1.161.19.3.1.13.1.1.4 | INTEGER (0..80) | RO | ||||||||||
column · INTEGER (0..80) · read-only · current Downlink Actual average transmit modulation rate in tenths for one minute interval. eg: 73 is 7.3X | |||||||||||||
| ClqiLowDownlinkExpectedRate | 1.3.6.1.4.1.161.19.3.1.13.1.1.5 | INTEGER (0..80) | RO | ||||||||||
column · INTEGER (0..80) · read-only · current Downlink Expected Rate in tenths for one minute interval. eg: 80 is 8X This is based upon the uplink receive power and does not take into account interference. | |||||||||||||
| ClqiLowUplinkQualityIndex | 1.3.6.1.4.1.161.19.3.1.13.1.1.6 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current Uplink Quality Index for one minute interval in percentage. 100% is best quality | |||||||||||||
| ClqiLowUplinkAverageActualRate | 1.3.6.1.4.1.161.19.3.1.13.1.1.7 | INTEGER (0..80) | RO | ||||||||||
column · INTEGER (0..80) · read-only · current Uplink Actual average transmit modulation rate in tenths for one minute interval. eg: 73 is 7.3X | |||||||||||||
| ClqiLowUplinkExpectedRate | 1.3.6.1.4.1.161.19.3.1.13.1.1.8 | INTEGER (0..80) | RO | ||||||||||
column · INTEGER (0..80) · read-only · current Uplink Expected Rate in tenths for one minute interval. eg: 80 is 8X This is based upon the uplink receive power and does not take into account interference. | |||||||||||||
| ClqiLowBeaconQualityIndex | 1.3.6.1.4.1.161.19.3.1.13.1.1.9 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current Beacon Quality Index for one minute interval in percentage. 100% is best quality For PMP this also includes the Scheduling Uplink Map. | |||||||||||||
| ClqiLowBeaconPercent | 1.3.6.1.4.1.161.19.3.1.13.1.1.10 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current Received beacon percentage for one minute interval For PMP this also includes the Scheduling Uplink Map. | |||||||||||||
| ClqiLowReRegQualityIndex | 1.3.6.1.4.1.161.19.3.1.13.1.1.11 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current Reregistration Quality Index for one minute interval in percentage. 100% is best quality | |||||||||||||
| ClqiLowReRegCount | 1.3.6.1.4.1.161.19.3.1.13.1.1.12 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current Reregistration count for one minute interval | |||||||||||||
| ClqiLowLinkESN | 1.3.6.1.4.1.161.19.3.1.13.1.1.13 | PhysAddress | RO | ||||||||||
column · PhysAddress · read-only · current The link's Electronic Serial Number, which is the device's Ethernet MAC address. | |||||||||||||
| ClqiLowDownlinkActualAverageEVM | 1.3.6.1.4.1.161.19.3.1.13.1.1.14 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Downlink Actual average EVM in tenths for one minute interval. eg: -315 is -31.5 dB | |||||||||||||
| ClqiLowDownlinkExpectedEVM | 1.3.6.1.4.1.161.19.3.1.13.1.1.15 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Downlink Expected EVM in tenths eg: -315 is -31.5 dB | |||||||||||||
| ClqiLowUplinkActualAverageEVM | 1.3.6.1.4.1.161.19.3.1.13.1.1.16 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Uplink Actual average EVM in tenths for one minute interval. eg: -315 is -31.5 dB | |||||||||||||
| ClqiLowUplinkExpectedEVM | 1.3.6.1.4.1.161.19.3.1.13.1.1.17 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Uplink Expected EVM in tenths eg: -315 is -31.5 dB | |||||||||||||
| TwhispApsLQIMidInterval | 1.3.6.1.4.1.161.19.3.1.13.2 | NA | |||||||||||
table · not-accessible · current Link Quality Indicator five minutes interval table. | |||||||||||||
| RwhispApsLQIMidIntervalEntry | 1.3.6.1.4.1.161.19.3.1.13.2.1 | NA | |||||||||||
row · not-accessible · current Link Quality Indicator for five minutes interval entry.
| |||||||||||||
| ClqiMidLinkLUID | 1.3.6.1.4.1.161.19.3.1.13.2.1.1 | INTEGER (2..239) | RO | ||||||||||
column · INTEGER (2..239) · read-only · current Logical User Identfication (LUID) number | |||||||||||||
| ClqiMidLQI | 1.3.6.1.4.1.161.19.3.1.13.2.1.2 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current Link Quality Indicator for five minutes interval. Ranges from 0 to 100 where 100 is the best. It's calculated based on receive power, modulation rate, reregistrations and beacon/map percentage. | |||||||||||||
| ClqiMidDownlinkQualityIndex | 1.3.6.1.4.1.161.19.3.1.13.2.1.3 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current Downlink Quality Index for five minute interval in percentage. 100% is best quality | |||||||||||||
| ClqiMidDownlinkAverageActualRate | 1.3.6.1.4.1.161.19.3.1.13.2.1.4 | INTEGER (0..80) | RO | ||||||||||
column · INTEGER (0..80) · read-only · current Downlink Actual average transmit modulation rate in tenths for five minute interval. eg: 73 is 7.3X | |||||||||||||
| ClqiMidDownlinkExpectedRate | 1.3.6.1.4.1.161.19.3.1.13.2.1.5 | INTEGER (0..80) | RO | ||||||||||
column · INTEGER (0..80) · read-only · current Downlink Expected Rate in tenths for five minute interval. eg: 80 is 8X | |||||||||||||
| ClqiMidUplinkQualityIndex | 1.3.6.1.4.1.161.19.3.1.13.2.1.6 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current Uplink Quality Index for five minute interval in percentage. 100% is best quality | |||||||||||||
| ClqiMidUplinkAverageActualRate | 1.3.6.1.4.1.161.19.3.1.13.2.1.7 | INTEGER (0..80) | RO | ||||||||||
column · INTEGER (0..80) · read-only · current Uplink Actual average transmit modulation rate in tenths for five minute interval. eg: 73 is 7.3X | |||||||||||||
| ClqiMidUplinkExpectedRate | 1.3.6.1.4.1.161.19.3.1.13.2.1.8 | INTEGER (0..80) | RO | ||||||||||
column · INTEGER (0..80) · read-only · current Uplink Expected Rate in tenths for five minute interval. eg: 80 is 8X This is based upon the uplink receive power and does not take into account interference. | |||||||||||||
| ClqiMidBeaconPercent | 1.3.6.1.4.1.161.19.3.1.13.2.1.9 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current Received beacon percent for five minute interval | |||||||||||||
| ClqiMidBeaconQualityIndex | 1.3.6.1.4.1.161.19.3.1.13.2.1.10 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current Beacon Quality Index for five minute interval in percentage. 100% is best quality For PMP this also includes the Scheduling Uplink Map. | |||||||||||||
| ClqiMidReRegCount | 1.3.6.1.4.1.161.19.3.1.13.2.1.11 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current Reregistration count for five minute interval | |||||||||||||
| ClqiMidReRegQualityIndex | 1.3.6.1.4.1.161.19.3.1.13.2.1.12 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current Reregistration Quality Index for five minute interval in percentage. 100% is best quality | |||||||||||||
| ClqiMidLinkESN | 1.3.6.1.4.1.161.19.3.1.13.2.1.13 | PhysAddress | RO | ||||||||||
column · PhysAddress · read-only · current The link's Electronic Serial Number, which is the device's Ethernet MAC address. | |||||||||||||
| ClqiMidDownlinkActualAverageEVM | 1.3.6.1.4.1.161.19.3.1.13.2.1.14 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Downlink Actual average EVM in tenths for five minutes interval. eg: -315 is -31.5 dB | |||||||||||||
| ClqiMidDownlinkExpectedEVM | 1.3.6.1.4.1.161.19.3.1.13.2.1.15 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Downlink Expected EVM in tenths eg: -315 is -31.5 dB | |||||||||||||
| ClqiMidUplinkActualAverageEVM | 1.3.6.1.4.1.161.19.3.1.13.2.1.16 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Uplink Actual average EVM in tenths for five minutes interval. eg: -315 is -31.5 dB | |||||||||||||
| ClqiMidUplinkExpectedEVM | 1.3.6.1.4.1.161.19.3.1.13.2.1.17 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Uplink Expected EVM in tenths eg: -315 is -31.5 dB | |||||||||||||
| TwhispApsLQIHighInterval | 1.3.6.1.4.1.161.19.3.1.13.3 | NA | |||||||||||
table · not-accessible · current Link Quality Indicator fifteen minutes interval table. | |||||||||||||
| RwhispApsLQIHighIntervalEntry | 1.3.6.1.4.1.161.19.3.1.13.3.1 | NA | |||||||||||
row · not-accessible · current Link Quality Indicator for fifteen minutes interval entry.
| |||||||||||||
| ClqiHighLinkLUID | 1.3.6.1.4.1.161.19.3.1.13.3.1.1 | INTEGER (2..239) | RO | ||||||||||
column · INTEGER (2..239) · read-only · current Logical User Identfication (LUID) number | |||||||||||||
| ClqiHighLQI | 1.3.6.1.4.1.161.19.3.1.13.3.1.2 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current Link Quality Indicator for fifteen minutes interval. Ranges from 0 to 100 where 100 is the best. It's calculated based on receive power, modulation rate, reregistrations and beacon/map percentage. | |||||||||||||
| ClqiHighDownlinkQualityIndex | 1.3.6.1.4.1.161.19.3.1.13.3.1.3 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current Downlink Quality Index for fifteen minute interval in percentage. 100% is best quality | |||||||||||||
| ClqiHighDownlinkAverageActualRate | 1.3.6.1.4.1.161.19.3.1.13.3.1.4 | INTEGER (0..80) | RO | ||||||||||
column · INTEGER (0..80) · read-only · current Downlink Actual average transmit modulation rate in tenths for fifteen minute interval. eg: 73 is 7.3X | |||||||||||||
| ClqiHighDownlinkExpectedRate | 1.3.6.1.4.1.161.19.3.1.13.3.1.5 | INTEGER (0..80) | RO | ||||||||||
column · INTEGER (0..80) · read-only · current Downlink Expected Rate in tenths for fifteen minute interval. eg: 80 is 8X This is based upon the uplink receive power and does not take into account interference. | |||||||||||||
| ClqiHighUplinkQualityIndex | 1.3.6.1.4.1.161.19.3.1.13.3.1.6 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current Uplink Quality Index for fifteen minute interval in percentage. 100% is best quality | |||||||||||||
| ClqiHighUplinkAverageActualRate | 1.3.6.1.4.1.161.19.3.1.13.3.1.7 | INTEGER (0..80) | RO | ||||||||||
column · INTEGER (0..80) · read-only · current Uplink Actual average transmit modulation rate in tenths for fifteen minute interval. eg: 73 is 7.3X | |||||||||||||
| ClqiHighUplinkExpectedRate | 1.3.6.1.4.1.161.19.3.1.13.3.1.8 | INTEGER (0..80) | RO | ||||||||||
column · INTEGER (0..80) · read-only · current Uplink Expected Rate in tenths for fifteen minute interval. eg: 80 is 8X This is based upon the uplink receive power and does not take into account interference. | |||||||||||||
| ClqiHighBeaconQualityIndex | 1.3.6.1.4.1.161.19.3.1.13.3.1.9 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current Beacon Quality Index for fifteen minute interval in percentage. 100% is best quality For PMP this also includes the Scheduling Uplink Map. | |||||||||||||
| ClqiHighBeaconPercent | 1.3.6.1.4.1.161.19.3.1.13.3.1.10 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current Received beacon percent for fifteen minute interval For PMP this also includes the Scheduling Uplink Map. | |||||||||||||
| ClqiHighReRegQualityIndex | 1.3.6.1.4.1.161.19.3.1.13.3.1.11 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current Reregistration Quality Index for fifteen minute interval in percentage. 100% is best quality | |||||||||||||
| ClqiHighReRegCount | 1.3.6.1.4.1.161.19.3.1.13.3.1.12 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current Reregistration count for fifteen minute interval | |||||||||||||
| ClqiHighLinkESN | 1.3.6.1.4.1.161.19.3.1.13.3.1.13 | PhysAddress | RO | ||||||||||
column · PhysAddress · read-only · current The link's Electronic Serial Number, which is the device's Ethernet MAC address. | |||||||||||||
| ClqiHighDownlinkActualAverageEVM | 1.3.6.1.4.1.161.19.3.1.13.3.1.14 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Downlink Actual average EVM in tenths for fifteen minute interval. eg: -315 is -31.5 dB | |||||||||||||
| ClqiHighDownlinkExpectedEVM | 1.3.6.1.4.1.161.19.3.1.13.3.1.15 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Downlink Expected EVM in tenths eg: -315 is -31.5 dB | |||||||||||||
| ClqiHighUplinkActualAverageEVM | 1.3.6.1.4.1.161.19.3.1.13.3.1.16 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Uplink Actual average EVM in tenths for fifteen minute interval. eg: -315 is -31.5 dB | |||||||||||||
| ClqiHighUplinkExpectedEVM | 1.3.6.1.4.1.161.19.3.1.13.3.1.17 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Uplink Expected EVM in tenths eg: -315 is -31.5 dB | |||||||||||||
| NwhispApsCbrs | 1.3.6.1.4.1.161.19.3.1.14 | ||||||||||||
| NwhispApsCbrsConfig | 1.3.6.1.4.1.161.19.3.1.14.1 | ||||||||||||
| ScbrsEnable | 1.3.6.1.4.1.161.19.3.1.14.1.1 | INTEGER | RW | enable(1) | |||||||||
scalar · INTEGER · read-write · current Enables Citizens Broadband Radio Service (CBRS) for FCC 3 GHz shared spectrum.
Example values from LibreNMS test devices
| |||||||||||||
| ScbsdUserID | 1.3.6.1.4.1.161.19.3.1.14.1.2 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current User ID for registering the Citizens Broadband Radio Service Device (CBSD) with Spectrum Access System (SAS). This will be used for registering AP and all associated SMs. This value will be always set by cnMaestro so it is a read only data. | |||||||||||||
| SapCbsdSelectRelinquishment | 1.3.6.1.4.1.161.19.3.1.14.1.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable to add AP CBSD for spectrum relinquishment and disable to remove it from the selection
| |||||||||||||
| SapCbsdSelectDeregistration | 1.3.6.1.4.1.161.19.3.1.14.1.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable to add AP CBSD for deregistration and disable to remove it from the selection
| |||||||||||||
| SperformRelinquishDeregister | 1.3.6.1.4.1.161.19.3.1.14.1.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Relinquish or Deregister CBSDs selected in the table
| |||||||||||||
| ScbsdCoexSectorId | 1.3.6.1.4.1.161.19.3.1.14.1.7 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Unique ID for identifying CBSDs in the sector. This can not be empty and is defaulted to the AP's MAC address. Unintended Coexistence Sector ID conflicts can cause other CBSDs share overlapping spectrum and cause interference. Do not change this unless really required. | |||||||||||||
| ScbsdCoexSpectrumReuseId | 1.3.6.1.4.1.161.19.3.1.14.1.8 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Sectors in which APs intend to use the same frequency, should configure the same coexistence spectrum reuse ID. Spectrum Access System (SAS) will allow the sectors to use the same frequency if this matches. This can be left empty if there are no nearby sectors sharing the same frequency. Spectrum reuse ID should be unique for the required group of sectors. Unintended spectrum reuse ID conflicts can cause unknown CBSDs share overlapping spectrum and cause interference. | |||||||||||||
| ScbrsMultiGrantEnable | 1.3.6.1.4.1.161.19.3.1.14.1.9 | INTEGER | RW | obsolete | |||||||||
scalar · INTEGER · read-write · obsolete Enables fetching multiple grants for wide channels. This option is obsolete from 21.0.
| |||||||||||||
| ScbrsRebootRadio | 1.3.6.1.4.1.161.19.3.1.14.1.10 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Reboot the radio if required for applying channel bandwidth changes based on CBRS channel availibility. Applicable for 450m radios only.
| |||||||||||||
| ScbrsChannelHunt | 1.3.6.1.4.1.161.19.3.1.14.1.11 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable search of available channels when no grants are available on the transmitting frequency or a multi grant channel gets suspended or terminated. This will also automatically select channels, acquire grant and transmit on the granted channels.
| |||||||||||||
| ScbsdCoexPrependUserId | 1.3.6.1.4.1.161.19.3.1.14.1.12 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable inclusion of User ID within the Sector ID and Spectrum Reuse ID parameters to make the Coexistence parameters unique within the SAS.
| |||||||||||||
| ScbrsChannelChange | 1.3.6.1.4.1.161.19.3.1.14.1.13 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables AP channel change to maintain connectivity to all the SMs, if one or more SMs in a sector are affected by a suspension or a termination. In case of PTP, this option enables BHM channel change to maintain connectivity to the BHS, if only BHS is affected by a suspension or termination and not the BHM.
| |||||||||||||
| ScbrsChannelChangeThreshold | 1.3.6.1.4.1.161.19.3.1.14.1.14 | INTEGER (1..99) | RW | ||||||||||
scalar · INTEGER (1..99) · read-write · current Percentage of affected SMs in order to change channel. A value of 20% indicates that if minimum 20% of SMs are affected by suspension/termination, then AP channel can be changed to maintain connectivity to all or most of the SMs. Default is 10%. | |||||||||||||
| ScbrsOriginalChannelRestoreTime | 1.3.6.1.4.1.161.19.3.1.14.1.15 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current After channel change due to suspension, AP can restore the original channel only after the configured time in minutes. Default is 15 minutes. | |||||||||||||
| NwhispApsCbrsApStatus | 1.3.6.1.4.1.161.19.3.1.14.2 | ||||||||||||
| SapCbsdStatus | 1.3.6.1.4.1.161.19.3.1.14.2.1 | DisplayString | RO | Authorized | |||||||||
scalar · DisplayString · read-only · current Current state of the Citizens Broadband Radio Service (CBRS) device. Example values from LibreNMS test devices
| |||||||||||||
| SapCbsdStateDuration | 1.3.6.1.4.1.161.19.3.1.14.2.2 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Time elapsed in the current state on the AP. | |||||||||||||
| SapCbsdLastHeartbeatTime | 1.3.6.1.4.1.161.19.3.1.14.2.3 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Expiry time of the ongoing CBRS request on the AP. | |||||||||||||
| SapCbsdHeartbeatDuration | 1.3.6.1.4.1.161.19.3.1.14.2.4 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Heartbeat Interval returned by the Spectrum Access System (SAS) for the AP.
| |||||||||||||
| SapCbsdGrantExpiry | 1.3.6.1.4.1.161.19.3.1.14.2.5 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Expiry time of the grant acquired from the Spectrum Access System (SAS) for the AP. | |||||||||||||
| SapCbsdTxExpiry | 1.3.6.1.4.1.161.19.3.1.14.2.6 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Transmit expiry time specified by the Spectrum Access System (SAS) for the AP. | |||||||||||||
| SapCbsdChannelType | 1.3.6.1.4.1.161.19.3.1.14.2.7 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Type of channel allocation done by the Spectrum Access System (SAS) for the AP. | |||||||||||||
| SapCbsdEirpRequested | 1.3.6.1.4.1.161.19.3.1.14.2.8 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current EIRP requested by the AP.
| |||||||||||||
| SapCbsdEirpGranted | 1.3.6.1.4.1.161.19.3.1.14.2.9 | INTEGER | RO | 46 | |||||||||
scalar · INTEGER · read-only · current EIRP granted by the Spectrum Access System (SAS) for the AP.
Example values from LibreNMS test devices
| |||||||||||||
| SapCbsdHeartbeatTotal | 1.3.6.1.4.1.161.19.3.1.14.2.10 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Total number of heartbeat requests sent by the AP CBSD to SAS. | |||||||||||||
| SapCbsdHeartbeatMissed | 1.3.6.1.4.1.161.19.3.1.14.2.11 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of heartbeat requests which didn't receive a response from the SAS. | |||||||||||||
| SapCbsdHeartbeatFailed | 1.3.6.1.4.1.161.19.3.1.14.2.12 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of heartbeat requests which received a failure response for the AP CBSD from the SAS. | |||||||||||||
| SapCbsdHeartbeatFailedSuspend | 1.3.6.1.4.1.161.19.3.1.14.2.13 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of heartbeat requests which received a grant suspend for the AP CBSD from the SAS. | |||||||||||||
| SapCbsdHeartbeatFailedTerminate | 1.3.6.1.4.1.161.19.3.1.14.2.14 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of heartbeat requests which received a grant terminate response for the AP CBSD from the SAS. | |||||||||||||
| SapCbsdHeartbeatFailedUnsync | 1.3.6.1.4.1.161.19.3.1.14.2.15 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of heartbeat requests which received a grant out-of-sync failure response for the AP CBSD from the SAS. | |||||||||||||
| SapCbsdId | 1.3.6.1.4.1.161.19.3.1.14.2.16 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Unique identifier assigned by the Spectrum Access System (SAS) for AP Citizens Broadband Radio Service Device(CBSD). | |||||||||||||
| SapCbsdSasEirpRequested | 1.3.6.1.4.1.161.19.3.1.14.2.17 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current EIRP requested by the AP in decimal.
| |||||||||||||
| SapCbsdSasEirpGranted | 1.3.6.1.4.1.161.19.3.1.14.2.18 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current EIRP granted by the Spectrum Access System (SAS) for the AP in decimal.
| |||||||||||||
| SapCbsdNumGrants | 1.3.6.1.4.1.161.19.3.1.14.2.19 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of valid grants in CBSD | |||||||||||||
| SapCbsdMultiGrantMode | 1.3.6.1.4.1.161.19.3.1.14.2.20 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Specifies if the radio is running in multi grant mode.
| |||||||||||||
| SbwReductionImpactedSmThreshold | 1.3.6.1.4.1.161.19.3.1.14.2.21 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Channel change will be triggered to connect maximum number of SMs when suspended/terminated SM count exceeds/matches this percentage. PMP Only. | |||||||||||||
| SapCbsdEirpInUse | 1.3.6.1.4.1.161.19.3.1.14.2.22 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current EIRP in use by the AP CBSD.
| |||||||||||||
| SapCbsdSasEirpInUse | 1.3.6.1.4.1.161.19.3.1.14.2.23 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current EIRP in use by the AP CBSD in decimal.
| |||||||||||||
| TwhispApsCbrsStatus | 1.3.6.1.4.1.161.19.3.1.14.3 | NA | |||||||||||
table · not-accessible · current Table indicating status of Citizens Broadband Radio Service (CBRS) devices. | |||||||||||||
| RwhispApsCbrsStatusEntry | 1.3.6.1.4.1.161.19.3.1.14.3.1 | NA | |||||||||||
row · not-accessible · current Citizens Broadband Radio Service (CBRS) device status entry.
| |||||||||||||
| CcbsdLuid | 1.3.6.1.4.1.161.19.3.1.14.3.1.1 | INTEGER (2..239) | RO | ||||||||||
column · INTEGER (2..239) · read-only · current Logical User Identification (LUID) number for the Citizens Broadband Radio Service (CBRS) device. | |||||||||||||
| CcbsdStatus | 1.3.6.1.4.1.161.19.3.1.14.3.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Current state of the Citizens Broadband Radio Service (CBRS) device. | |||||||||||||
| CcbsdStateDuration | 1.3.6.1.4.1.161.19.3.1.14.3.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Time elapsed in the current state. | |||||||||||||
| CcbsdLastHeartbeatTime | 1.3.6.1.4.1.161.19.3.1.14.3.1.4 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Expiry time of the ongoing CBRS request. | |||||||||||||
| CcbsdHeartbeatInterval | 1.3.6.1.4.1.161.19.3.1.14.3.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Heartbeat Interval returned by the Spectrum Access System (SAS).
| |||||||||||||
| CcbsdGrantExpiry | 1.3.6.1.4.1.161.19.3.1.14.3.1.6 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Expiry time of the grant acquired from the Spectrum Access System (SAS). | |||||||||||||
| CcbsdTxExpiry | 1.3.6.1.4.1.161.19.3.1.14.3.1.7 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Transmit expiry time specified by the Spectrum Access System (SAS). | |||||||||||||
| CcbsdChannelType | 1.3.6.1.4.1.161.19.3.1.14.3.1.8 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Type of channel allocation done by the Spectrum Access System (SAS). | |||||||||||||
| CcbsdEirpRequested | 1.3.6.1.4.1.161.19.3.1.14.3.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current EIRP requested by the CBRS device.
| |||||||||||||
| CcbsdEirpGranted | 1.3.6.1.4.1.161.19.3.1.14.3.1.10 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current EIRP granted by the Spectrum Access System (SAS).
| |||||||||||||
| CcbsdHeartbeatTotal | 1.3.6.1.4.1.161.19.3.1.14.3.1.11 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total number of heartbeat requests sent by the CBSD to SAS. | |||||||||||||
| CcbsdHeartbeatMissed | 1.3.6.1.4.1.161.19.3.1.14.3.1.12 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of heartbeat requests which didn't receive a response from the SAS. | |||||||||||||
| CcbsdHeartbeatFailed | 1.3.6.1.4.1.161.19.3.1.14.3.1.13 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of heartbeat requests which received a failure response from the SAS. | |||||||||||||
| CcbsdHeartbeatRelativeBulk | 1.3.6.1.4.1.161.19.3.1.14.3.1.14 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total number of bulk heartbeat requests sent by AP since the SM established its first session. | |||||||||||||
| CcbsdHeartbeatSkipped | 1.3.6.1.4.1.161.19.3.1.14.3.1.15 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of bulk heartbeat requests sent by AP which didn't include an entry for the SM because it was not connected to the AP. | |||||||||||||
| CcbsdHeartbeatFailedSuspend | 1.3.6.1.4.1.161.19.3.1.14.3.1.16 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of heartbeat requests which received a grant suspend failure response from the SAS. | |||||||||||||
| CcbsdHeartbeatFailedTerminate | 1.3.6.1.4.1.161.19.3.1.14.3.1.17 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of heartbeat requests which received a grant terminate failure response from the SAS. | |||||||||||||
| CcbsdHeartbeatFailedUnsync | 1.3.6.1.4.1.161.19.3.1.14.3.1.18 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of heartbeat requests which received a grant state out-of-sync failure response from the SAS. | |||||||||||||
| CcbsdId | 1.3.6.1.4.1.161.19.3.1.14.3.1.19 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Unique identifier assigned by the Spectrum Access System (SAS) for Citizens Broadband Radio Service Device(CBSD). | |||||||||||||
| CcbsdMacAddress | 1.3.6.1.4.1.161.19.3.1.14.3.1.20 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current MAC address of Citizens Broadband Radio Service Device(CBSD) | |||||||||||||
| CcbsdHeartbeatStandalone | 1.3.6.1.4.1.161.19.3.1.14.3.1.21 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of heartbeat requests from the CBSD which were not part of a bulk heartbeat request. | |||||||||||||
| CcbsdSasEirpRequested | 1.3.6.1.4.1.161.19.3.1.14.3.1.22 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current EIRP requested by the CBRS device in decimal.
| |||||||||||||
| CcbsdSasEirpGranted | 1.3.6.1.4.1.161.19.3.1.14.3.1.23 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current EIRP granted by the Spectrum Access System (SAS) in decimal.
| |||||||||||||
| CcbsdNumGrants | 1.3.6.1.4.1.161.19.3.1.14.3.1.24 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Number of valid grants in CBSD | |||||||||||||
| CcbsdMultiGrantMode | 1.3.6.1.4.1.161.19.3.1.14.3.1.25 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Specifies if the CBSD is running in multi grant mode.
| |||||||||||||
| CcbsdEirpInUse | 1.3.6.1.4.1.161.19.3.1.14.3.1.26 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current EIRP in use by the CBRS device.
| |||||||||||||
| CcbsdSasEirpInUse | 1.3.6.1.4.1.161.19.3.1.14.3.1.27 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current EIRP in use by the CBRS device in decimal.
| |||||||||||||
| TwhispApsCbrsSMsConfigTable | 1.3.6.1.4.1.161.19.3.1.14.4 | NA | |||||||||||
table · not-accessible · current CBSD SMs configuration table | |||||||||||||
| RwhispApsCbrsSMsConfigEntry | 1.3.6.1.4.1.161.19.3.1.14.4.1 | NA | |||||||||||
| CcbsdLuidIndex | 1.3.6.1.4.1.161.19.3.1.14.4.1.1 | INTEGER (2..253) | RO | ||||||||||
column · INTEGER (2..253) · read-only · current Logical User Identification (LUID) number for the Citizens Broadband Radio Service (CBRS) device. | |||||||||||||
| CcbsdSelectRelinquishment | 1.3.6.1.4.1.161.19.3.1.14.4.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Enable to add CBSD for spectrum relinquishment and disable to remove it from the selection
| |||||||||||||
| CcbsdSelectDeregistration | 1.3.6.1.4.1.161.19.3.1.14.4.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Enable to add CBSD for deregistration and disable to remove it from the selection
| |||||||||||||
| TwhispApsCbrsApGrant | 1.3.6.1.4.1.161.19.3.1.14.5 | NA | |||||||||||
table · not-accessible · current Table indicating status of grants in Citizens Broadband Radio Service (CBRS) device. | |||||||||||||
| RwhispApsCbrsApGrantEntry | 1.3.6.1.4.1.161.19.3.1.14.5.1 | NA | |||||||||||
row · not-accessible · current Citizens Broadband Radio Service (CBRS) device grant entry.
| |||||||||||||
| CapGrantLowFreq | 1.3.6.1.4.1.161.19.3.1.14.5.1.1 | INTEGER (3550000..3700000) | RO | ||||||||||
column · INTEGER (3550000..3700000) · read-only · current The lowest frequency of the grant frequency range in kHz. | |||||||||||||
| CapGrantHighFreq | 1.3.6.1.4.1.161.19.3.1.14.5.1.2 | INTEGER (3550000..3700000) | RO | ||||||||||
column · INTEGER (3550000..3700000) · read-only · current The highest frequency of the grant frequency range in kHz. | |||||||||||||
| CapGrantId | 1.3.6.1.4.1.161.19.3.1.14.5.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The unique ID of the grant from the Spectrum Access System (SAS). | |||||||||||||
| CapGrantState | 1.3.6.1.4.1.161.19.3.1.14.5.1.4 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Current state of the grant in Citizens Broadband Radio Service (CBRS) device. | |||||||||||||
| CapGrantStateDuration | 1.3.6.1.4.1.161.19.3.1.14.5.1.5 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Time elapsed in the current state of grant. | |||||||||||||
| CapGrantLastHeartbeatTime | 1.3.6.1.4.1.161.19.3.1.14.5.1.6 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Time when the last heartbeat request was sent. | |||||||||||||
| CapGrantHeartbeatInterval | 1.3.6.1.4.1.161.19.3.1.14.5.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Heartbeat Interval returned by the Spectrum Access System (SAS).
| |||||||||||||
| CapGrantExpiry | 1.3.6.1.4.1.161.19.3.1.14.5.1.8 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Expiry time of the grant acquired from the Spectrum Access System (SAS). | |||||||||||||
| CapGrantTxExpiry | 1.3.6.1.4.1.161.19.3.1.14.5.1.9 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Transmit expiry time specified by the Spectrum Access System (SAS). | |||||||||||||
| CapGrantChannelType | 1.3.6.1.4.1.161.19.3.1.14.5.1.10 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Type of channel allocation done by the Spectrum Access System (SAS) for the grant. | |||||||||||||
| CapGrantEirp | 1.3.6.1.4.1.161.19.3.1.14.5.1.11 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current EIRP granted by the Spectrum Access System (SAS). | |||||||||||||
| CapGrantHeartbeatTotal | 1.3.6.1.4.1.161.19.3.1.14.5.1.12 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total number of heartbeat requests sent by the AP CBSD for the grant to SAS. | |||||||||||||
| CapGrantHeartbeatMissed | 1.3.6.1.4.1.161.19.3.1.14.5.1.13 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of heartbeat requests for the grant which didn't receive a response from the SAS. | |||||||||||||
| CapGrantHeartbeatFailed | 1.3.6.1.4.1.161.19.3.1.14.5.1.14 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of heartbeat requests for the grant which received a failure response for the AP CBSD from the SAS. | |||||||||||||
| CapGrantHeartbeatFailedSuspend | 1.3.6.1.4.1.161.19.3.1.14.5.1.15 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of heartbeat requests for the grant which received a grant suspend for the AP CBSD from the SAS. | |||||||||||||
| CapGrantHeartbeatFailedTerminate | 1.3.6.1.4.1.161.19.3.1.14.5.1.16 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of heartbeat requests for the grant which received a grant terminate response for the AP CBSD from the SAS. | |||||||||||||
| CapGrantHeartbeatFailedUnsync | 1.3.6.1.4.1.161.19.3.1.14.5.1.17 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of heartbeat requests for the grant which received a grant out-of-sync failure response for the AP CBSD from the SAS. | |||||||||||||
| TwhispApsCbrsSmGrant | 1.3.6.1.4.1.161.19.3.1.14.6 | NA | |||||||||||
table · not-accessible · current Table indicating status of grants in Citizens Broadband Radio Service (CBRS) device. | |||||||||||||
| RwhispApsCbrsSmGrantEntry | 1.3.6.1.4.1.161.19.3.1.14.6.1 | NA | |||||||||||
row · not-accessible · current Citizens Broadband Radio Service (CBRS) device grant entry.
| |||||||||||||
| CsmGrantLuid | 1.3.6.1.4.1.161.19.3.1.14.6.1.1 | INTEGER (2..239) | RO | ||||||||||
column · INTEGER (2..239) · read-only · current Logical User Identification (LUID) number for the Citizens Broadband Radio Service (CBRS) device holding the grant. | |||||||||||||
| CsmGrantLowFreq | 1.3.6.1.4.1.161.19.3.1.14.6.1.2 | INTEGER (3550000..3700000) | RO | ||||||||||
column · INTEGER (3550000..3700000) · read-only · current The lowest frequency of the grant frequency range in kHz. | |||||||||||||
| CsmGrantHighFreq | 1.3.6.1.4.1.161.19.3.1.14.6.1.3 | INTEGER (3550000..3700000) | RO | ||||||||||
column · INTEGER (3550000..3700000) · read-only · current The highest frequency of the grant frequency range in kHz. | |||||||||||||
| CsmGrantMac | 1.3.6.1.4.1.161.19.3.1.14.6.1.4 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current MAC address of Citizens Broadband Radio Service Device(CBSD) holding the grant. | |||||||||||||
| CsmGrantId | 1.3.6.1.4.1.161.19.3.1.14.6.1.5 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The unique ID of the grant from the Spectrum Access System (SAS). | |||||||||||||
| CsmGrantState | 1.3.6.1.4.1.161.19.3.1.14.6.1.6 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Current state of the grant in Citizens Broadband Radio Service (CBRS) device. | |||||||||||||
| CsmGrantStateDuration | 1.3.6.1.4.1.161.19.3.1.14.6.1.7 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Time elapsed in the current state of grant. | |||||||||||||
| CsmGrantLastHeartbeatTime | 1.3.6.1.4.1.161.19.3.1.14.6.1.8 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Time when the last heartbeat request was sent. | |||||||||||||
| CsmGrantHeartbeatInterval | 1.3.6.1.4.1.161.19.3.1.14.6.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Heartbeat Interval returned by the Spectrum Access System (SAS).
| |||||||||||||
| CsmGrantExpiry | 1.3.6.1.4.1.161.19.3.1.14.6.1.10 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Expiry time of the grant acquired from the Spectrum Access System (SAS). | |||||||||||||
| CsmGrantTxExpiry | 1.3.6.1.4.1.161.19.3.1.14.6.1.11 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Transmit expiry time specified by the Spectrum Access System (SAS). | |||||||||||||
| CsmGrantChannelType | 1.3.6.1.4.1.161.19.3.1.14.6.1.12 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Type of channel allocation done by the Spectrum Access System (SAS) for the grant. | |||||||||||||
| CsmGrantEirp | 1.3.6.1.4.1.161.19.3.1.14.6.1.13 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current EIRP granted by the Spectrum Access System (SAS). | |||||||||||||
| CsmGrantHeartbeatTotal | 1.3.6.1.4.1.161.19.3.1.14.6.1.14 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total number of heartbeat requests sent by the AP CBSD for the grant to SAS. | |||||||||||||
| CsmGrantHeartbeatMissed | 1.3.6.1.4.1.161.19.3.1.14.6.1.15 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of heartbeat requests for the grant which didn't receive a response from the SAS. | |||||||||||||
| CsmGrantHeartbeatFailed | 1.3.6.1.4.1.161.19.3.1.14.6.1.16 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of heartbeat requests for the grant which received a failure response for the AP CBSD from the SAS. | |||||||||||||
| CsmGrantHeartbeatFailedSuspend | 1.3.6.1.4.1.161.19.3.1.14.6.1.17 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of heartbeat requests for the grant which received a grant suspend for the AP CBSD from the SAS. | |||||||||||||
| CsmGrantHeartbeatFailedTerminate | 1.3.6.1.4.1.161.19.3.1.14.6.1.18 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of heartbeat requests for the grant which received a grant terminate response for the AP CBSD from the SAS. | |||||||||||||
| CsmGrantHeartbeatFailedUnsync | 1.3.6.1.4.1.161.19.3.1.14.6.1.19 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of heartbeat requests for the grant which received a grant out-of-sync failure response for the AP CBSD from the SAS. | |||||||||||||
| CsmGrantHeartbeatSkipped | 1.3.6.1.4.1.161.19.3.1.14.6.1.20 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of bulk heartbeat requests sent by AP which didn't include an entry for the SM because it was not connected to the AP. | |||||||||||||
| CsmGrantHeartbeatRelativeBulk | 1.3.6.1.4.1.161.19.3.1.14.6.1.21 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total number of bulk heartbeat requests sent by AP since the SM established its first session. | |||||||||||||
| CsmGrantHeartbeatStandalone | 1.3.6.1.4.1.161.19.3.1.14.6.1.22 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of heartbeat requests from the CBSD which were not part of a bulk heartbeat request. | |||||||||||||
| NwhispApsRFStatus | 1.3.6.1.4.1.161.19.3.1.15 | ||||||||||||
| TapCarrierInfo | 1.3.6.1.4.1.161.19.3.1.15.1 | NA | |||||||||||
table · not-accessible · current Canopy V AP Carrier Information table | |||||||||||||
| RapCarrierInfoEntry | 1.3.6.1.4.1.161.19.3.1.15.1.1 | NA | |||||||||||
| CapCarrierInfoTableIdx | 1.3.6.1.4.1.161.19.3.1.15.1.1.1 | INTEGER (1..2) | RO | ||||||||||
column · INTEGER (1..2) · read-only · current Carrier Table Index | |||||||||||||
| CapCarrierStatus | 1.3.6.1.4.1.161.19.3.1.15.1.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Carrier Status 1-Active 0-Inactive
| |||||||||||||
| CapCarrierBand | 1.3.6.1.4.1.161.19.3.1.15.1.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Carrier Band
| |||||||||||||
| CapCarrierFrequency | 1.3.6.1.4.1.161.19.3.1.15.1.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Carrier Frequency in kHz
| |||||||||||||
| CapCarrierAggregateBw | 1.3.6.1.4.1.161.19.3.1.15.1.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Carrier Aggregate Bandwidth in MHz
| |||||||||||||
| CapCarrierTxPwr | 1.3.6.1.4.1.161.19.3.1.15.1.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Carrier Transmit Power in dBm
| |||||||||||||
| CapCarrierEIRP | 1.3.6.1.4.1.161.19.3.1.15.1.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Carrier EIRP in dBm
| |||||||||||||
| TapComponentCarrierInfo | 1.3.6.1.4.1.161.19.3.1.15.2 | NA | |||||||||||
table · not-accessible · current Canopy V AP Component Carrier Information table | |||||||||||||
| RapComponentCarrierInfoEntry | 1.3.6.1.4.1.161.19.3.1.15.2.1 | NA | |||||||||||
row · not-accessible · current Canopy V AP Component Carrier Information table entry
| |||||||||||||
| CapCCTableIdx | 1.3.6.1.4.1.161.19.3.1.15.2.1.1 | INTEGER (1..4) | RO | ||||||||||
column · INTEGER (1..4) · read-only · current Index to the Canopy V Component Carrier Information Table | |||||||||||||
| CapCCStatus | 1.3.6.1.4.1.161.19.3.1.15.2.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The Component Carrier Status 1-Active 0-Inactive
| |||||||||||||
| CapCCCarrierAssignment | 1.3.6.1.4.1.161.19.3.1.15.2.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Carrier Assignment for the Component Carrier | |||||||||||||
| CapCCChannelFreq | 1.3.6.1.4.1.161.19.3.1.15.2.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Component Carrier Specific Channel Frequency Value in kHz
| |||||||||||||
| CapCCChannelBW | 1.3.6.1.4.1.161.19.3.1.15.2.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The Component Carrier Channel Bandwidth in MHz
| |||||||||||||
| CapCCTxPwr | 1.3.6.1.4.1.161.19.3.1.15.2.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The Component Carrier Transmit Power in dBm
| |||||||||||||
| CapCCFrameutilizationDL | 1.3.6.1.4.1.161.19.3.1.15.2.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Percentage of the Component Carrier's Total Downlink Frame Utilization for 5 minutes. | |||||||||||||
| CapCCFrameutilizationUL | 1.3.6.1.4.1.161.19.3.1.15.2.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Percentage of the Component Carrier's Total Uplink Frame Utilization for 5 minutes. | |||||||||||||
| CapCCSpecEffExtrapDL | 1.3.6.1.4.1.161.19.3.1.15.2.1.10 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Extrapolated Downlink Spectral Efficiency of the Component carrier in the last 5 minute (Multiplied by 1000). Measured in units of user data bits per second per hertz. Divide by 1000 for actual number. | |||||||||||||
| CapCCSpecEffExtrapUL | 1.3.6.1.4.1.161.19.3.1.15.2.1.11 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Extrapolated Uplink Spectral Efficiency of the Component carrier in the last 5 minute (Multiplied by 1000). Measured in units of user data bits per second per hertz. Divide by 1000 for actual number. | |||||||||||||
| TapSmComponentCarrierInfo | 1.3.6.1.4.1.161.19.3.1.15.3 | NA | |||||||||||
table · not-accessible · current Component Carrier Information table for each SM on the AP | |||||||||||||
| RapSmComponentCarrierInfoEntry | 1.3.6.1.4.1.161.19.3.1.15.3.1 | NA | |||||||||||
row · not-accessible · current Component Carrier Information table entry for each SM on the AP
| |||||||||||||
| CapSmLUID | 1.3.6.1.4.1.161.19.3.1.15.3.1.1 | INTEGER (1..4) | RO | ||||||||||
column · INTEGER (1..4) · read-only · current SM Logical User Identification (LUID) number for the Canopy V Component Carrier Information Table | |||||||||||||
| CapSmCCInfoIdx | 1.3.6.1.4.1.161.19.3.1.15.3.1.2 | INTEGER (1..4) | RO | ||||||||||
column · INTEGER (1..4) · read-only · current Component Carrier index to the Canopy V Component Carrier Information Table | |||||||||||||
| CapSmCCRssiHorizontal | 1.3.6.1.4.1.161.19.3.1.15.3.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Component Carrier receive power level of the horizontal antenna in dBm. | |||||||||||||
| CapSmCCRssiVertical | 1.3.6.1.4.1.161.19.3.1.15.3.1.4 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Component Carrier receive power level of the vertical antenna in dBm. | |||||||||||||
Traps / Notifications
- cbrsTxDisable
1.3.6.1.4.1.161.19.3.1.5.8.2 - cbrsTxEnable
1.3.6.1.4.1.161.19.3.1.5.8.1 - mumimoTrialEvent
1.3.6.1.4.1.161.19.3.1.5.6.1 - regulatoryApCheckInvalidChBwFailed
1.3.6.1.4.1.161.19.3.1.5.4.3 - regulatoryApCheckInvalidChanFailed
1.3.6.1.4.1.161.19.3.1.5.4.1 - regulatoryCheckFailedNoRegionAp
1.3.6.1.4.1.161.19.3.1.5.4.2 - rfLinkOverloadCondition
1.3.6.1.4.1.161.19.3.1.5.5.1 - whispDefKeyUsed
1.3.6.1.4.1.161.19.3.1.5.1.4 - whispDownlinkLqiBelowThreshold
1.3.6.1.4.1.161.19.3.1.5.7.1 - whispDownlinkLqiRestored
1.3.6.1.4.1.161.19.3.1.5.7.2 - whispGPSInSync
1.3.6.1.4.1.161.19.3.1.5.2.1 - whispGPSOutSync
1.3.6.1.4.1.161.19.3.1.5.2.2 - whispRadarDetected
1.3.6.1.4.1.161.19.3.1.5.3.1 - whispRadarEnd
1.3.6.1.4.1.161.19.3.1.5.3.2 - whispRegComplete
1.3.6.1.4.1.161.19.3.1.5.1.1 - whispRegFailure
1.3.6.1.4.1.161.19.3.1.5.1.3 - whispRegLost
1.3.6.1.4.1.161.19.3.1.5.1.2 - whispUplinkLqiBelowThreshold
1.3.6.1.4.1.161.19.3.1.5.7.3 - whispUplinkLqiRestored
1.3.6.1.4.1.161.19.3.1.5.7.4