CMM3-MIB
MotorolaThis module contains CMM3 MIB definitions.
snmptranslate -m CMM3-MIB -Tpsnmpwalk -v2c -c <community> -m CMM3-MIB <host> 1.3.6.1.4.1.161.19.1.1.15Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
| WHISP-GLOBAL-REG-MIB | whispBox, whispCMM, whispModules |
| WHISP-TCV2-MIB | EventString, WhispLUID, WhispMACAddress |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IcmmIIIMibModule | 1.3.6.1.4.1.161.19.1.1.15 | ||||||||||||
identity This module contains CMM3 MIB definitions. | |||||||||||||
| NcmmGroups | 1.3.6.1.4.1.161.19.3.4.1 | ||||||||||||
| GcmmSwitchGroup | 1.3.6.1.4.1.161.19.3.4.1.1 | ||||||||||||
group · current CMMIII switch group.
| |||||||||||||
| GcmmConfigGroup | 1.3.6.1.4.1.161.19.3.4.1.2 | ||||||||||||
group · current CMMIII configuration group.
| |||||||||||||
| GcmmStatusGroup | 1.3.6.1.4.1.161.19.3.4.1.3 | ||||||||||||
group · current CMMIII configuration group. | |||||||||||||
| GcmmGPSGroup | 1.3.6.1.4.1.161.19.3.4.1.4 | ||||||||||||
group · current CMMIII GPS status group. | |||||||||||||
| GcmmUserTableGroup | 1.3.6.1.4.1.161.19.3.4.1.5 | ||||||||||||
group · current CMMIII User Information Table group.
| |||||||||||||
| NcmmSwitch | 1.3.6.1.4.1.161.19.3.4.2 | ||||||||||||
| TcmmSwitchTable | 1.3.6.1.4.1.161.19.3.4.2.1 | NA | |||||||||||
table · not-accessible · current Table of CMM MIB counters. | |||||||||||||
| RcmmSwitchEntry | 1.3.6.1.4.1.161.19.3.4.2.1.1 | NA | |||||||||||
| CportNumber | 1.3.6.1.4.1.161.19.3.4.2.1.1.1 | INTEGER (1..9) | RO | 1 | |||||||||
| CrxDropPkts | 1.3.6.1.4.1.161.19.3.4.2.1.1.2 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The number of good packets received by a port that were dropped due to lack of resources(e.g., lack of input buffers)or were dropped due to lack of resources before a determination of the validity of the packet was able to be made (e.g., receive FIFO overflow). The counter is only incremented if the receive error was not counted by either the RxExcessSizeDisc, the RxAlignmentErrors or the RxRCSErrors counters. Example values from LibreNMS test devices
| |||||||||||||
| CrxOctets | 1.3.6.1.4.1.161.19.3.4.2.1.1.3 | Counter64 | RO | 0 | |||||||||
| CrxBroadcastPkts | 1.3.6.1.4.1.161.19.3.4.2.1.1.4 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The number of good packets received by a port that are directed to the broadcast address. This counter does not include error broadcast packets or valid multicast packets. | |||||||||||||
| CrxMulticastPkts | 1.3.6.1.4.1.161.19.3.4.2.1.1.5 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The number of good packets received by a port that are directed to the multicast address. This counter does not include error multicast packets or valid broadcast packets. | |||||||||||||
| CrxSAChanges | 1.3.6.1.4.1.161.19.3.4.2.1.1.6 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The number of times the SA of good receive packets has changed from the previous value. A count greater than 1 generally indicates the port if connected to a repeater based network. | |||||||||||||
| CrxUndersizePkts | 1.3.6.1.4.1.161.19.3.4.2.1.1.7 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The number of good packets received by a port that are less than 64 bytes long (excluding framing bits but including the FCS). Example values from LibreNMS test devices
| |||||||||||||
| CrxOversizePkts | 1.3.6.1.4.1.161.19.3.4.2.1.1.8 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The number of good packets received by a port that are greater than 1522 bytes inclusive (excluding framing bits but including the FCS). Note that this counter alone will be incremented for packets in the range 1523-1536 bytes inclusive, whereas both this counter and the RxExcessSizeDisc counter will be incremented for packets of 1537 bytes and higher. | |||||||||||||
| CrxFragments | 1.3.6.1.4.1.161.19.3.4.2.1.1.9 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The number of packets received by a port that are less than 64 bytes(excluding framing bits) and have either an FCS error or an alignment error Example values from LibreNMS test devices
| |||||||||||||
| CrxJabbers | 1.3.6.1.4.1.161.19.3.4.2.1.1.10 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The number of packets received by a port that are longer than 1522 bytes and have either an FCS error or an alignment error. Example values from LibreNMS test devices
| |||||||||||||
| CrxUnicastPkts | 1.3.6.1.4.1.161.19.3.4.2.1.1.11 | Counter32 | RO | 0 | |||||||||
| CrxAlignmentErrors | 1.3.6.1.4.1.161.19.3.4.2.1.1.12 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The number of packets received by a port that have a length (excluding framing bits but including FCS) between 64 and 1522 bytes, inclusive, and have a bad FCS with a non-integral number of bytes. Example values from LibreNMS test devices
| |||||||||||||
| CrxFCSErrors | 1.3.6.1.4.1.161.19.3.4.2.1.1.13 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The number of packets received by a port that have a length (excluding framing bits but including FCS) between 64 and 152 bytes, and have a bad FCS with an integral number of bytes. | |||||||||||||
| CrxGoodOctets | 1.3.6.1.4.1.161.19.3.4.2.1.1.14 | Counter64 | RO | 0 | |||||||||
| CrxExcessSizeDisc | 1.3.6.1.4.1.161.19.3.4.2.1.1.15 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The number of good packets received by a port that are greater than 1536 bytes (excluding framing bits but including FCS) and were discarded due to excessive length. Note that the RxOversizePkts counter alone is incremented for packets in the range of 1523-1536 bytes inclusive, whereas both this counter and the RxOversizePkts are incremented for packets of 1537 bytes and higher. Example values from LibreNMS test devices
| |||||||||||||
| CrxPausePkts | 1.3.6.1.4.1.161.19.3.4.2.1.1.16 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The number of PAUSE frame received by a port. The PAUSE frame must have a valid MAC Control Frame EtherType field (88-08h), have a destination MAC address of either the MAC Control frame reserved multicast address(01-80-c2-00-00-011) or the unique MAC address associated with the specific port, a valid PAUSE Opcode (00-01), be a minimum of 64 bytes in length (excluding preamble but including FCS), and have a valid CRC. Although an 802.3 compliant MAC is only permitted to transmit PAUSE frames when in full duplex mode, with flow control enabled, and with the transfer of PAUSE frames determined by the result of auto-negotiation, an 802.3 MAC receiver is required to count all received PAUSE frames, regardless of its half/full-duplex status. An indication that a MAC is in half-duplex with the RxPausePkts incrementing indicates a non-compliant transmitting device on the network. | |||||||||||||
| CrxSymbolErrors | 1.3.6.1.4.1.161.19.3.4.2.1.1.17 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The total number of times a valid length packet was received at a port and at least one invalid data symbol was detected. Counter only increment once per carrier event and does not increment on detection of collision during the carrier event. | |||||||||||||
| CtxDropPkts | 1.3.6.1.4.1.161.19.3.4.2.1.1.18 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The total number of good bytes of data transmitted by a port (excluding preamble but including FCS). Example values from LibreNMS test devices
| |||||||||||||
| CtxOctets | 1.3.6.1.4.1.161.19.3.4.2.1.1.19 | Counter64 | RO | 29349558703 | |||||||||
column · Counter64 · read-only · current The number of good packets received by a port that are directed to the multicast address. This counter does not include error multicast packets or valid broadcast packets. | |||||||||||||
| CtxBroadcastPkts | 1.3.6.1.4.1.161.19.3.4.2.1.1.20 | Counter32 | RO | 206348598 | |||||||||
column · Counter32 · read-only · current The number of good packets transmitted by a port that are directed to a broadcast address. This counter does not include errored broadcast packets or valid multicast packets. | |||||||||||||
| CtxMulticastPkts | 1.3.6.1.4.1.161.19.3.4.2.1.1.21 | Counter32 | RO | 8725689 | |||||||||
column · Counter32 · read-only · current The number of good packets transmitted by a port that are directed to a multicast address. This counter does not include errored multicast packets or valid broadcast packets. | |||||||||||||
| CtxCollisions | 1.3.6.1.4.1.161.19.3.4.2.1.1.22 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The number of collision experienced by a port during packet transmissions. Example values from LibreNMS test devices
| |||||||||||||
| CtxUnicastPkts | 1.3.6.1.4.1.161.19.3.4.2.1.1.23 | Counter32 | RO | 3777857 | |||||||||
| CtxSingleCollision | 1.3.6.1.4.1.161.19.3.4.2.1.1.24 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The number packets successfully transmitted by a port that experienced exactly one collision. Example values from LibreNMS test devices
| |||||||||||||
| CtxMultipleCollision | 1.3.6.1.4.1.161.19.3.4.2.1.1.25 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The number packets successfully transmitted by a port that experienced more than one collision Example values from LibreNMS test devices
| |||||||||||||
| CtxDeferredTransmit | 1.3.6.1.4.1.161.19.3.4.2.1.1.26 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The number packets successfully transmitted by a port for which the first transmission attempt is delayed because medium is busy. Example values from LibreNMS test devices
| |||||||||||||
| CtxLateCollision | 1.3.6.1.4.1.161.19.3.4.2.1.1.27 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The number of times that a collision is detected later than 512 bit-times into the transmission of a packet. Example values from LibreNMS test devices
| |||||||||||||
| CtxExcessiveCollision | 1.3.6.1.4.1.161.19.3.4.2.1.1.28 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The number of packets that are not transmitted from a port because the packet experienced 16 transmission attempts. Example values from LibreNMS test devices
| |||||||||||||
| CtxPausePkts | 1.3.6.1.4.1.161.19.3.4.2.1.1.29 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The number of PAUSE frame transmitted by a port. The MAC resolve to full duplex mode, with 803.3x flow control PAUSE frame exchange enabled at the completion of auto-negotiation. Example values from LibreNMS test devices
| |||||||||||||
| CtxFrameInDisc | 1.3.6.1.4.1.161.19.3.4.2.1.1.30 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current The number of valid packets received which are discarded by the forwarding process due to lack of space on an output queue. Note: not maintained or reported in the MIB counters. Located in Congestion registers. This attribute only increments if a network device is not acting in compliance with a flow control request, or the BCM5327M internal flow control/buffering scheme has been misconfigured. Example values from LibreNMS test devices
| |||||||||||||
| Cpkts64Octets | 1.3.6.1.4.1.161.19.3.4.2.1.1.31 | Counter32 | RO | 0 | |||||||||
| Cpkts65to127Octets | 1.3.6.1.4.1.161.19.3.4.2.1.1.32 | Counter32 | RO | 0 | |||||||||
| Cpkts128to255Octets | 1.3.6.1.4.1.161.19.3.4.2.1.1.33 | Counter32 | RO | 0 | |||||||||
| Cpkts256to511Octets | 1.3.6.1.4.1.161.19.3.4.2.1.1.34 | Counter32 | RO | 0 | |||||||||
| Cpkts512to1023Octets | 1.3.6.1.4.1.161.19.3.4.2.1.1.35 | Counter32 | RO | 0 | |||||||||
| Cpkts1024to1522Octets | 1.3.6.1.4.1.161.19.3.4.2.1.1.36 | Counter32 | RO | 0 | |||||||||
| SportMirrorEnable | 1.3.6.1.4.1.161.19.3.4.2.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current A unique value for each CMM port. Its value starts from 1
| |||||||||||||
| SmirrorCapturePort | 1.3.6.1.4.1.161.19.3.4.2.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current A unique value for each CMM port. Its value starts from 1
| |||||||||||||
| TcmmSwitchMirrorSrcPortsTable | 1.3.6.1.4.1.161.19.3.4.2.4 | NA | |||||||||||
table · not-accessible · current Table of CMM Switch Mirror Source Ports. | |||||||||||||
| RcmmSwitchMirrorSrcPortsEntry | 1.3.6.1.4.1.161.19.3.4.2.4.1 | NA | |||||||||||
| CmirSrcPortNumber | 1.3.6.1.4.1.161.19.3.4.2.4.1.1 | INTEGER (1..9) | RO | ||||||||||
column · INTEGER (1..9) · read-only · current A unique value for each CMM port. Its value starts from 1 | |||||||||||||
| CmirSrcRxEnable | 1.3.6.1.4.1.161.19.3.4.2.4.1.2 | INTEGER (0..1) | RW | ||||||||||
column · INTEGER (0..1) · read-write · current A unique value for each CMM port. Its value starts from 1 | |||||||||||||
| CmirSrcTxEnable | 1.3.6.1.4.1.161.19.3.4.2.4.1.3 | INTEGER (0..1) | RW | ||||||||||
column · INTEGER (0..1) · read-write · current A unique value for each CMM port. Its value starts from 1 | |||||||||||||
| NcmmConfig | 1.3.6.1.4.1.161.19.3.4.3 | ||||||||||||
| SgpsTimingPulse | 1.3.6.1.4.1.161.19.3.4.3.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current (1) -- Master. (0) -- Slave.
| |||||||||||||
| Slan1Ip | 1.3.6.1.4.1.161.19.3.4.3.2 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current LAN 1 IP. | |||||||||||||
| Slan1SubnetMask | 1.3.6.1.4.1.161.19.3.4.3.3 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current LAN 1 subnet mask. | |||||||||||||
| SdefaultGateway | 1.3.6.1.4.1.161.19.3.4.3.4 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Default gateway | |||||||||||||
| Sport1PowerCtr | 1.3.6.1.4.1.161.19.3.4.3.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Power control for port 1. (1) -- Power on. (0) -- Power off
| |||||||||||||
| Sport2PowerCtr | 1.3.6.1.4.1.161.19.3.4.3.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Power control for port 2. (1) -- Power on. (0) -- Power off.
| |||||||||||||
| Sport3PowerCtr | 1.3.6.1.4.1.161.19.3.4.3.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Power control for port 3. (1) -- Power on. (0) -- Power off
| |||||||||||||
| Sport4PowerCtr | 1.3.6.1.4.1.161.19.3.4.3.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Power control for port 4. (1) -- Power on. (0) -- Power off
| |||||||||||||
| Sport5PowerCtr | 1.3.6.1.4.1.161.19.3.4.3.9 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Power control for port 5. (1) -- Power on. (0) -- Power off
| |||||||||||||
| Sport6PowerCtr | 1.3.6.1.4.1.161.19.3.4.3.10 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Power control for port 6. (1) -- Power on. (0) -- Power off
| |||||||||||||
| Sport7PowerCtr | 1.3.6.1.4.1.161.19.3.4.3.11 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Power control for port 7. (1) -- Power on. (0) -- Power off
| |||||||||||||
| Sport8PowerCtr | 1.3.6.1.4.1.161.19.3.4.3.12 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Power control for port 8. (1) -- Power on. (0) -- Power off
| |||||||||||||
| SdisplayOnlyAccess | 1.3.6.1.4.1.161.19.3.4.3.13 | DisplayString | RW | obsolete | |||||||||
scalar · DisplayString · read-write · obsolete Display only access to web interface and telnet. | |||||||||||||
| SfullAccess | 1.3.6.1.4.1.161.19.3.4.3.14 | DisplayString | RW | obsolete | |||||||||
scalar · DisplayString · read-write · obsolete Full access password to web interface and telnet. | |||||||||||||
| SdisplayOnlyStatus | 1.3.6.1.4.1.161.19.3.4.3.15 | DisplayString | RO | obsolete | |||||||||
scalar · DisplayString · read-only · obsolete Display only password status. | |||||||||||||
| SfullAccessStatus | 1.3.6.1.4.1.161.19.3.4.3.16 | DisplayString | RO | obsolete | |||||||||
scalar · DisplayString · read-only · obsolete Full access password status. | |||||||||||||
| SwebAutoUpdate | 1.3.6.1.4.1.161.19.3.4.3.17 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Web page auto update in seconds. 0 means disabled.
| |||||||||||||
| Sport1Config | 1.3.6.1.4.1.161.19.3.4.3.18 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Link speed configuration on port 1.
| |||||||||||||
| Sport2Config | 1.3.6.1.4.1.161.19.3.4.3.19 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Link speed configuration on port 2.
| |||||||||||||
| Sport3Config | 1.3.6.1.4.1.161.19.3.4.3.20 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Link speed configuration on port 3.
| |||||||||||||
| Sport4Config | 1.3.6.1.4.1.161.19.3.4.3.21 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Link speed configuration on port 4.
| |||||||||||||
| Sport5Config | 1.3.6.1.4.1.161.19.3.4.3.22 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Link speed configuration on port 5.
| |||||||||||||
| Sport6Config | 1.3.6.1.4.1.161.19.3.4.3.23 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Link speed configuration on port 6.
| |||||||||||||
| Sport7Config | 1.3.6.1.4.1.161.19.3.4.3.24 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Link speed configuration on port 7.
| |||||||||||||
| Sport8Config | 1.3.6.1.4.1.161.19.3.4.3.25 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Link speed configuration on port 8.
| |||||||||||||
| Sport1Description | 1.3.6.1.4.1.161.19.3.4.3.26 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Port 1 text description. | |||||||||||||
| Sport2Description | 1.3.6.1.4.1.161.19.3.4.3.27 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Port 2 text description. | |||||||||||||
| Sport3Description | 1.3.6.1.4.1.161.19.3.4.3.28 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Port 3 text description. | |||||||||||||
| Sport4Description | 1.3.6.1.4.1.161.19.3.4.3.29 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Port 4 text description. | |||||||||||||
| Sport5Description | 1.3.6.1.4.1.161.19.3.4.3.30 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Port 5 text description. | |||||||||||||
| Sport6Description | 1.3.6.1.4.1.161.19.3.4.3.31 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Port 6 text description. | |||||||||||||
| Sport7Description | 1.3.6.1.4.1.161.19.3.4.3.32 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Port 7 text description. | |||||||||||||
| Sport8Description | 1.3.6.1.4.1.161.19.3.4.3.33 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Port 8 text description. | |||||||||||||
| SsnmpTrap1 | 1.3.6.1.4.1.161.19.3.4.3.34 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current SNMP Trap Address 1. | |||||||||||||
| SsnmpTrap2 | 1.3.6.1.4.1.161.19.3.4.3.35 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current SNMP Trap Address 2. | |||||||||||||
| SsnmpTrap3 | 1.3.6.1.4.1.161.19.3.4.3.36 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current SNMP Trap Address 3. | |||||||||||||
| SsnmpTrap4 | 1.3.6.1.4.1.161.19.3.4.3.37 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current SNMP Trap Address 4. | |||||||||||||
| SsnmpTrap5 | 1.3.6.1.4.1.161.19.3.4.3.38 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current SNMP Trap Address 5. | |||||||||||||
| SsnmpTrap6 | 1.3.6.1.4.1.161.19.3.4.3.39 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current SNMP Trap Address 6. | |||||||||||||
| SsnmpTrap7 | 1.3.6.1.4.1.161.19.3.4.3.40 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current SNMP Trap Address 7. | |||||||||||||
| SsnmpTrap8 | 1.3.6.1.4.1.161.19.3.4.3.41 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current SNMP Trap Address 8. | |||||||||||||
| SsnmpTrap9 | 1.3.6.1.4.1.161.19.3.4.3.42 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current SNMP Trap Address 9. | |||||||||||||
| SsnmpTrap10 | 1.3.6.1.4.1.161.19.3.4.3.43 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current SNMP Trap Address 10. | |||||||||||||
| SvlanTagEnable | 1.3.6.1.4.1.161.19.3.4.3.44 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable 802.1Q VLAN tagging.P (1) -- Enable Tagging. (0) -- Disable Tagging.
| |||||||||||||
| SvlanTagId | 1.3.6.1.4.1.161.19.3.4.3.45 | INTEGER (1..4094) | RW | ||||||||||
scalar · INTEGER (1..4094) · read-write · current 802.1q VLAN Tag ID, 1-4094. | |||||||||||||
| Sport1Uplink | 1.3.6.1.4.1.161.19.3.4.3.46 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configure Port 1 as Uplink Port. (1) -- Port 1 is an uplink port. (0) -- Port 1 is not an uplink port.
| |||||||||||||
| Sport2Uplink | 1.3.6.1.4.1.161.19.3.4.3.47 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configure Port 2 as Uplink Port. (1) -- Port 2 is an uplink port. (0) -- Port 2 is not an uplink port.
| |||||||||||||
| Sport3Uplink | 1.3.6.1.4.1.161.19.3.4.3.48 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configure Port 3 as Uplink Port. (1) -- Port 3 is an uplink port. (0) -- Port 3 is not an uplink port.
| |||||||||||||
| Sport4Uplink | 1.3.6.1.4.1.161.19.3.4.3.49 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configure Port 4 as Uplink Port. (1) -- Port 4 is an uplink port. (0) -- Port 4 is not an uplink port.
| |||||||||||||
| Sport5Uplink | 1.3.6.1.4.1.161.19.3.4.3.50 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configure Port 5 as Uplink Port. (1) -- Port 5 is an uplink port. (0) -- Port 5 is not an uplink port.
| |||||||||||||
| Sport6Uplink | 1.3.6.1.4.1.161.19.3.4.3.51 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configure Port 6 as Uplink Port. (1) -- Port 6 is an uplink port. (0) -- Port 6 is not an uplink port.
| |||||||||||||
| Sport7Uplink | 1.3.6.1.4.1.161.19.3.4.3.52 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configure Port 7 as Uplink Port. (1) -- Port 7 is an uplink port. (0) -- Port 7 is not an uplink port.
| |||||||||||||
| Sport8Uplink | 1.3.6.1.4.1.161.19.3.4.3.53 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configure Port 8 as Uplink Port. (1) -- Port 8 is an uplink port. (0) -- Port 8 is not an uplink port.
| |||||||||||||
| SrebootIfRequired | 1.3.6.1.4.1.161.19.3.4.3.54 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Reboot CMM if required. (1) -- Check if CMM reboot is required and do so. (0) -- Do not check for reboot.
| |||||||||||||
| Sport1VlanConf | 1.3.6.1.4.1.161.19.3.4.3.55 | INTEGER (0..255) | RW | ||||||||||
scalar · INTEGER (0..255) · read-write · current Port 1 VLAN Port Configuration. Bitmap determines which Port(s) Port 1 will egress data. 0 means no ports, 2 means port 2, 6 means ports 2 and 3, etc. | |||||||||||||
| Sport2VlanConf | 1.3.6.1.4.1.161.19.3.4.3.56 | INTEGER (0..255) | RW | ||||||||||
scalar · INTEGER (0..255) · read-write · current Port 2 VLAN Port Configuration. Bitmap determines which Port(s) Port 2 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc. | |||||||||||||
| Sport3VlanConf | 1.3.6.1.4.1.161.19.3.4.3.57 | INTEGER (0..255) | RW | ||||||||||
scalar · INTEGER (0..255) · read-write · current Port 3 VLAN Port Configuration. Bitmap determines which Port(s) Port 3 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc. | |||||||||||||
| Sport4VlanConf | 1.3.6.1.4.1.161.19.3.4.3.58 | INTEGER (0..255) | RW | ||||||||||
scalar · INTEGER (0..255) · read-write · current Port 4 VLAN Port Configuration. Bitmap determines which Port(s) Port 4 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc. | |||||||||||||
| Sport5VlanConf | 1.3.6.1.4.1.161.19.3.4.3.59 | INTEGER (0..255) | RW | ||||||||||
scalar · INTEGER (0..255) · read-write · current Port 5 VLAN Port Configuration. Bitmap determines which Port(s) Port 5 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc. | |||||||||||||
| Sport6VlanConf | 1.3.6.1.4.1.161.19.3.4.3.60 | INTEGER (0..255) | RW | ||||||||||
scalar · INTEGER (0..255) · read-write · current Port 6 VLAN Port Configuration. Bitmap determines which Port(s) Port 6 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc. | |||||||||||||
| Sport7VlanConf | 1.3.6.1.4.1.161.19.3.4.3.61 | INTEGER (0..255) | RW | ||||||||||
scalar · INTEGER (0..255) · read-write · current Port 7 VLAN Port Configuration. Bitmap determines which Port(s) Port 7 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc. | |||||||||||||
| Sport8VlanConf | 1.3.6.1.4.1.161.19.3.4.3.62 | INTEGER (0..255) | RW | ||||||||||
scalar · INTEGER (0..255) · read-write · current Port 8 VLAN Port Configuration. Bitmap determines which Port(s) Port 8 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc. | |||||||||||||
| Sport1PwrReset | 1.3.6.1.4.1.161.19.3.4.3.63 | INTEGER (0..1) | RW | ||||||||||
scalar · INTEGER (0..1) · read-write · current If Port 1 is Powered, attched device will be reset when set to 1. If Port 1 is Not Powered, nothing will happen. | |||||||||||||
| Sport2PwrReset | 1.3.6.1.4.1.161.19.3.4.3.64 | INTEGER (0..1) | RW | ||||||||||
scalar · INTEGER (0..1) · read-write · current If Port 2 is Powered, attched device will be reset when set to 1. If Port 2 is Not Powered, nothing will happen. | |||||||||||||
| Sport3PwrReset | 1.3.6.1.4.1.161.19.3.4.3.65 | INTEGER (0..1) | RW | ||||||||||
scalar · INTEGER (0..1) · read-write · current If Port 3 is Powered, attched device will be reset when set to 1. If Port 3 is Not Powered, nothing will happen. | |||||||||||||
| Sport4PwrReset | 1.3.6.1.4.1.161.19.3.4.3.66 | INTEGER (0..1) | RW | ||||||||||
scalar · INTEGER (0..1) · read-write · current If Port 4 is Powered, attched device will be reset when set to 1. If Port 4 is Not Powered, nothing will happen. | |||||||||||||
| Sport5PwrReset | 1.3.6.1.4.1.161.19.3.4.3.67 | INTEGER (0..1) | RW | ||||||||||
scalar · INTEGER (0..1) · read-write · current If Port 5 is Powered, attched device will be reset when set to 1. If Port 5 is Not Powered, nothing will happen. | |||||||||||||
| Sport6PwrReset | 1.3.6.1.4.1.161.19.3.4.3.68 | INTEGER (0..1) | RW | ||||||||||
scalar · INTEGER (0..1) · read-write · current If Port 6 is Powered, attched device will be reset when set to 1. If Port 6 is Not Powered, nothing will happen. | |||||||||||||
| Sport7PwrReset | 1.3.6.1.4.1.161.19.3.4.3.69 | INTEGER (0..1) | RW | ||||||||||
scalar · INTEGER (0..1) · read-write · current If Port 7 is Powered, attched device will be reset when set to 1. If Port 7 is Not Powered, nothing will happen. | |||||||||||||
| Sport8PwrReset | 1.3.6.1.4.1.161.19.3.4.3.70 | INTEGER (0..1) | RW | ||||||||||
scalar · INTEGER (0..1) · read-write · current If Port 8 is Powered, attched device will be reset when set to 1. If Port 8 is Not Powered, nothing will happen. | |||||||||||||
| SsnmpReadOnly | 1.3.6.1.4.1.161.19.3.4.3.71 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current SNMP Permissions 1 - Read Only 0 - Read/Write.
| |||||||||||||
| SsnmpCommunityString | 1.3.6.1.4.1.161.19.3.4.3.72 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Community String | |||||||||||||
| SsnmpAccessSubnet | 1.3.6.1.4.1.161.19.3.4.3.73 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Accessing Subnet 1. In x.x.x.x/y form where x.x.x.x is network and y is mask length. | |||||||||||||
| SsnmpAccessSubnet2 | 1.3.6.1.4.1.161.19.3.4.3.74 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Accessing Subnet 2. In x.x.x.x/y form where x.x.x.x is network and y is mask length. | |||||||||||||
| SsnmpAccessSubnet3 | 1.3.6.1.4.1.161.19.3.4.3.75 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Accessing Subnet 3. In x.x.x.x/y form where x.x.x.x is network and y is mask length. | |||||||||||||
| SsnmpAccessSubnet4 | 1.3.6.1.4.1.161.19.3.4.3.76 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Accessing Subnet 4. In x.x.x.x/y form where x.x.x.x is network and y is mask length. | |||||||||||||
| SsnmpAccessSubnet5 | 1.3.6.1.4.1.161.19.3.4.3.77 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Accessing Subnet 5. In x.x.x.x/y form where x.x.x.x is network and y is mask length. | |||||||||||||
| SsnmpAccessSubnet6 | 1.3.6.1.4.1.161.19.3.4.3.78 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Accessing Subnet 6. In x.x.x.x/y form where x.x.x.x is network and y is mask length. | |||||||||||||
| SsnmpAccessSubnet7 | 1.3.6.1.4.1.161.19.3.4.3.79 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Accessing Subnet 7. In x.x.x.x/y form where x.x.x.x is network and y is mask length. | |||||||||||||
| SsnmpAccessSubnet8 | 1.3.6.1.4.1.161.19.3.4.3.80 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Accessing Subnet 8. In x.x.x.x/y form where x.x.x.x is network and y is mask length. | |||||||||||||
| SsnmpAccessSubnet9 | 1.3.6.1.4.1.161.19.3.4.3.81 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Accessing Subnet 9. In x.x.x.x/y form where x.x.x.x is network and y is mask length. | |||||||||||||
| SsnmpAccessSubnet10 | 1.3.6.1.4.1.161.19.3.4.3.82 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current SNMP Accessing Subnet 10. In x.x.x.x/y form where x.x.x.x is network and y is mask length. | |||||||||||||
| Sport1Management | 1.3.6.1.4.1.161.19.3.4.3.83 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configure Port 1 as a Management Port. (1) -- Port 1 is a Management port. (0) -- Port 1 is not a Management port.
| |||||||||||||
| Sport2Management | 1.3.6.1.4.1.161.19.3.4.3.84 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configure Port 2 as a Management Port. (1) -- Port 2 is a Managementport. (0) -- Port 2 is not a Management port.
| |||||||||||||
| Sport3Management | 1.3.6.1.4.1.161.19.3.4.3.85 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configure Port 3 as a Management Port. (1) -- Port 3 is a Management port. (0) -- Port 3 is not a Management port.
| |||||||||||||
| Sport4Management | 1.3.6.1.4.1.161.19.3.4.3.86 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configure Port 4 as a Management Port. (1) -- Port 4 is a Management port. (0) -- Port 4 is not a Management port.
| |||||||||||||
| Sport5Management | 1.3.6.1.4.1.161.19.3.4.3.87 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configure Port 5 as a Management Port. (1) -- Port 5 is a Management port. (0) -- Port 5 is not a Management port.
| |||||||||||||
| Sport6Management | 1.3.6.1.4.1.161.19.3.4.3.88 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configure Port 6 as a Management Port. (1) -- Port 6 is a Management port. (0) -- Port 6 is not a Management port.
| |||||||||||||
| Sport7Management | 1.3.6.1.4.1.161.19.3.4.3.89 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configure Port 7 as a Management Port. (1) -- Port 7 is a Management port. (0) -- Port 7 is not a Management port.
| |||||||||||||
| Sport8Management | 1.3.6.1.4.1.161.19.3.4.3.90 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configure Port 8 as a Management Port. (1) -- Port 8 is a Management port. (0) -- Port 8 is not a Management port.
| |||||||||||||
| SsessionTimeout | 1.3.6.1.4.1.161.19.3.4.3.91 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Timer for Telnet, Web and FTP sessions. | |||||||||||||
| SsiteInfoViewable | 1.3.6.1.4.1.161.19.3.4.3.92 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable non login users the ability to view Site Information
| |||||||||||||
| SipAccessFilterEnable | 1.3.6.1.4.1.161.19.3.4.3.93 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To enable or disable IP access filtering to Management functions. (0) - IP access will be allowed from all addresses. (1) - IP access will be controlled using allowedIPAccess1-3 entries.
| |||||||||||||
| SallowedIPAccess1 | 1.3.6.1.4.1.161.19.3.4.3.94 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Allow access to CMM Management from this IP. 0 is default setting to allow from all IPs. | |||||||||||||
| SallowedIPAccess2 | 1.3.6.1.4.1.161.19.3.4.3.95 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Allow access to CMM Management from this IP. 0 is default setting to allow from all IPs. | |||||||||||||
| SallowedIPAccess3 | 1.3.6.1.4.1.161.19.3.4.3.96 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Allow access to CMM Management from this IP. 0 is default setting to allow from all IPs. | |||||||||||||
| SverifyGPSChecksum | 1.3.6.1.4.1.161.19.3.4.3.97 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable verification of GPS message checksums.
| |||||||||||||
| Scmm3SnmpGPSSyncTrapEnable | 1.3.6.1.4.1.161.19.3.4.3.98 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Variable to enable/disable GPS sync/out-sync traps.
| |||||||||||||
| NcmmStatus | 1.3.6.1.4.1.161.19.3.4.4 | ||||||||||||
| TcmmPortTable | 1.3.6.1.4.1.161.19.3.4.4.1 | NA | |||||||||||
table · not-accessible · current A list of CMM III port entries. | |||||||||||||
| RcmmPortEntry | 1.3.6.1.4.1.161.19.3.4.4.1.1 | NA | |||||||||||
| CportIndex | 1.3.6.1.4.1.161.19.3.4.4.1.1.1 | INTEGER (1..8) | RO | 1 | |||||||||
| ClinkStatus | 1.3.6.1.4.1.161.19.3.4.4.1.1.2 | INTEGER | RO | on(1) | |||||||||
column · INTEGER · read-only · current The current operational state of the port.
Example values from LibreNMS test devices
| |||||||||||||
| ClinkSpeed | 1.3.6.1.4.1.161.19.3.4.4.1.1.3 | INTEGER | RO | hundredBaseT(1) | |||||||||
column · INTEGER · read-only · current Network connectivity, 100BaseT or 10BaseT.
Example values from LibreNMS test devices
| |||||||||||||
| CduplexStatus | 1.3.6.1.4.1.161.19.3.4.4.1.1.4 | INTEGER | RO | fullDuplex(1) | |||||||||
column · INTEGER · read-only · current Half-duplex data transmission or Full-duplex data transmission.
Example values from LibreNMS test devices
| |||||||||||||
| CpowerStatus | 1.3.6.1.4.1.161.19.3.4.4.1.1.5 | INTEGER | RO | on(1) | |||||||||
| CuplinkStatus | 1.3.6.1.4.1.161.19.3.4.4.1.1.6 | INTEGER | RO | off(0) | |||||||||
column · INTEGER · read-only · current Port Uplink status indicates whether port is configred as an Uplink Port.
Example values from LibreNMS test devices
| |||||||||||||
| CmanagementStatus | 1.3.6.1.4.1.161.19.3.4.4.1.1.7 | INTEGER | RO | on(1) | |||||||||
column · INTEGER · read-only · current Management Port status indicates whether port is configred as a CMM3 Management Port.
Example values from LibreNMS test devices
| |||||||||||||
| SdeviceType | 1.3.6.1.4.1.161.19.3.4.4.2 | DisplayString | RO | CMM | |||||||||
scalar · DisplayString · read-only · current A textual string containing information about device type. Example values from LibreNMS test devices
| |||||||||||||
| SpldVersion | 1.3.6.1.4.1.161.19.3.4.4.3 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Version of PLD code. | |||||||||||||
| SsoftwareVersion | 1.3.6.1.4.1.161.19.3.4.4.4 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CMM-III software version. It includes the operation system and software build time. | |||||||||||||
| SsystemTime | 1.3.6.1.4.1.161.19.3.4.4.5 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The current time. | |||||||||||||
| SupTime | 1.3.6.1.4.1.161.19.3.4.4.6 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Time since last system reboot. | |||||||||||||
| SsatellitesVisible | 1.3.6.1.4.1.161.19.3.4.4.7 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Number of satellites the GPS should see. | |||||||||||||
| SsatellitesTracked | 1.3.6.1.4.1.161.19.3.4.4.8 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Current number of satellites that GPS actually tracks. | |||||||||||||
| Slatitude | 1.3.6.1.4.1.161.19.3.4.4.9 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CMM-III latitude. | |||||||||||||
| Slongitude | 1.3.6.1.4.1.161.19.3.4.4.10 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CMM-III longitude. | |||||||||||||
| Sheight | 1.3.6.1.4.1.161.19.3.4.4.11 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The height of CMM-III unit. | |||||||||||||
| StrackingMode | 1.3.6.1.4.1.161.19.3.4.4.12 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CMM-III GPS tracking mode. | |||||||||||||
| SsyncStatus | 1.3.6.1.4.1.161.19.3.4.4.13 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CMM-III GPS sync pulse status. | |||||||||||||
| SmacAddress | 1.3.6.1.4.1.161.19.3.4.4.14 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current MAC address of the unit. | |||||||||||||
| NcmmGps | 1.3.6.1.4.1.161.19.3.4.5 | ||||||||||||
| SgpsTrackingMode | 1.3.6.1.4.1.161.19.3.4.5.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CMM-III GPS tracking mode. | |||||||||||||
| SgpsTime | 1.3.6.1.4.1.161.19.3.4.5.2 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CMM-III GPS time. | |||||||||||||
| SgpsDate | 1.3.6.1.4.1.161.19.3.4.5.3 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CMM-III GPS date. | |||||||||||||
| SgpsSatellitesVisible | 1.3.6.1.4.1.161.19.3.4.5.4 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Number of satellites the GPS is supposed to see. | |||||||||||||
| SgpsSatellitesTracked | 1.3.6.1.4.1.161.19.3.4.5.5 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Current number of satellites GPS tracked. | |||||||||||||
| SgpsHeight | 1.3.6.1.4.1.161.19.3.4.5.6 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CMM height. | |||||||||||||
| SgpsAntennaConnection | 1.3.6.1.4.1.161.19.3.4.5.7 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Antenna Connection status. | |||||||||||||
| SgpsLatitude | 1.3.6.1.4.1.161.19.3.4.5.8 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CMM Latitude. | |||||||||||||
| SgpsLongitude | 1.3.6.1.4.1.161.19.3.4.5.9 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CMM longitude. | |||||||||||||
| SgpsInvalidMsg | 1.3.6.1.4.1.161.19.3.4.5.10 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Number of invalid messages. | |||||||||||||
| SgpsRestartCount | 1.3.6.1.4.1.161.19.3.4.5.11 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of unit restart. | |||||||||||||
| SgpsReceiverInfo | 1.3.6.1.4.1.161.19.3.4.5.12 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current A textual string contains information on GPS receiver. | |||||||||||||
| SgpsReInitCount | 1.3.6.1.4.1.161.19.3.4.5.13 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Number of times the GPS device has been completely re-initialized. | |||||||||||||
| NcmmEventLog | 1.3.6.1.4.1.161.19.3.4.6 | ||||||||||||
| SeventLog | 1.3.6.1.4.1.161.19.3.4.6.1 | EventString | RO | ||||||||||
scalar · EventString · read-only · current CMM Event log. | |||||||||||||
| SntpLog | 1.3.6.1.4.1.161.19.3.4.6.2 | EventString | RO | ||||||||||
scalar · EventString · read-only · current CMM3 NTP Log | |||||||||||||
| NcmmControls | 1.3.6.1.4.1.161.19.3.4.7 | ||||||||||||
| Sreboot | 1.3.6.1.4.1.161.19.3.4.7.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting the variable to 1 will reboot the unit. When the unit finishs rebooting, it will be in finishedReboot state.
| |||||||||||||
| SclearEventLog | 1.3.6.1.4.1.161.19.3.4.7.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting the variable to 1 will clear the event log.
| |||||||||||||
| TcmmUserTable | 1.3.6.1.4.1.161.19.3.4.8 | NA | |||||||||||
table · not-accessible · current User information table. | |||||||||||||
| RcmmUserEntry | 1.3.6.1.4.1.161.19.3.4.8.1 | NA | |||||||||||
| CentryIndex | 1.3.6.1.4.1.161.19.3.4.8.1.1 | INTEGER (1..5) | RO | ||||||||||
column · INTEGER (1..5) · read-only · current User information table index. | |||||||||||||
| CuserLoginName | 1.3.6.1.4.1.161.19.3.4.8.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current User name. | |||||||||||||
| CuserPswd | 1.3.6.1.4.1.161.19.3.4.8.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current User password. | |||||||||||||
| CaccessLevel | 1.3.6.1.4.1.161.19.3.4.8.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current User access level.
| |||||||||||||