CAMBIUM-PTP670-MIB
Cambium Networks Limited (formerly 'PipingHot Networks Limited')MIB for non-line-of-sight (NLOS) wireless ethernet bridge.
snmptranslate -m CAMBIUM-PTP670-MIB -Tpsnmpwalk -v2c -c <community> -m CAMBIUM-PTP670-MIB <host> 1.3.6.1.4.1.17713Imports
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Icambium | 1.3.6.1.4.1.17713 | ||||||||||||
identity MIB for non-line-of-sight (NLOS) wireless ethernet bridge. | |||||||||||||
| Nptp | 1.3.6.1.4.1.17713.1 | ||||||||||||
| Nptmp | 1.3.6.1.4.1.17713.2 | ||||||||||||
| Nptp670 | 1.3.6.1.4.1.17713.11 | ||||||||||||
| Ndfs | 1.3.6.1.4.1.17713.11.3 | ||||||||||||
| SdfsTableNumber | 1.3.6.1.4.1.17713.11.3.1 | INTEGER (1..305) | RO | ||||||||||
scalar · INTEGER (1..305) · read-only · current Number of entries in the dfsTable | |||||||||||||
| TdfsTable | 1.3.6.1.4.1.17713.11.3.2 | NA | |||||||||||
table · not-accessible · current A table storing a snapshot of various DFS measurements for each channel | |||||||||||||
| RdfsTableEntry | 1.3.6.1.4.1.17713.11.3.2.1 | NA | |||||||||||
| CdfsTableIndex | 1.3.6.1.4.1.17713.11.3.2.1.1 | INTEGER (1..305) | NA | ||||||||||
column · INTEGER (1..305) · not-accessible · current used to index values in the dfsTable. | |||||||||||||
| CdfsMeans | 1.3.6.1.4.1.17713.11.3.2.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Snapshot of DFS means | |||||||||||||
| CdfsNineNinePointNinePercentiles | 1.3.6.1.4.1.17713.11.3.2.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Snapshot of DFS 99.9 percentiles | |||||||||||||
| CdfsPeaks | 1.3.6.1.4.1.17713.11.3.2.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Snapshot of DFS peaks | |||||||||||||
| SextendedSpectrumScanning | 1.3.6.1.4.1.17713.11.3.3 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Enables Extended Spectrum Scanning
| |||||||||||||
| Nbridge | 1.3.6.1.4.1.17713.11.4 | ||||||||||||
| SlocalPacketFiltering | 1.3.6.1.4.1.17713.11.4.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current When Local Packet Filtering is Enabled, the unit keeps track of the port (Main, SFP, Aux or Wireless) on which a packet with a given MAC source address destined to the management agent has been received. This MAC address to port mapping is then used in order to route any response from the management agent to the right port. When Local Packet Filtering is Disabled, any Ethernet packet from the management agent is sent to all ports.
| |||||||||||||
| SpacketsToInternalStack | 1.3.6.1.4.1.17713.11.4.2 | Counter64 | RO | ||||||||||
scalar · Counter64 · read-only · current Total number of good packets the bridge has transmitted to the internal TCP/IP stack. | |||||||||||||
| SpacketsFromInternalStack | 1.3.6.1.4.1.17713.11.4.3 | Counter64 | RO | ||||||||||
scalar · Counter64 · read-only · current Total number of good packets the bridge has received from the internal TCP/IP stack. | |||||||||||||
| Nconfiguration | 1.3.6.1.4.1.17713.11.5 | ||||||||||||
| SiPv4Address | 1.3.6.1.4.1.17713.11.5.1 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Internet protocol (IPv4) address. This address is used by the family of Internet protocols to uniquely identify the unit on a network. | |||||||||||||
| SsubnetMask | 1.3.6.1.4.1.17713.11.5.2 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current A subnet allows the flow of network traffic between hosts to be segregated based on a network configuration. By organizing hosts into logical groups, subnetting can improve network security and performance. | |||||||||||||
| SgatewayIPAddress | 1.3.6.1.4.1.17713.11.5.3 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IPv4 address of a device on the current network that acts as an IPv4 network gateway. A gateway acts as an entrance / exit to packets from / to other networks | |||||||||||||
| StargetMACAddress | 1.3.6.1.4.1.17713.11.5.4 | OCTET STRING (SIZE (6)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (6)) · read-only · current MAC address of the unit forming the other end of the link | |||||||||||||
| SmasterSlaveMode | 1.3.6.1.4.1.17713.11.5.5 | INTEGER | RW | master(0) | |||||||||
scalar · INTEGER · read-write · current The wireless link operates using a master and slave relationship
Example values from LibreNMS test devices
| |||||||||||||
| SmaximumTransmitPower | 1.3.6.1.4.1.17713.11.5.6 | INTEGER (-15..30) | RO | ||||||||||
scalar · INTEGER (-15..30) · read-only · current Maximum transmit power the wireless unit is permitted to use when establishing and maintaining the wireless link. This may be reduced during installation | |||||||||||||
| SantennaGain | 1.3.6.1.4.1.17713.11.5.7 | INTEGER (100..610) | RW | ||||||||||
scalar · INTEGER (100..610) · read-write · current Antenna Gain. Expressed in 10ths of dBi. | |||||||||||||
| ScableLoss | 1.3.6.1.4.1.17713.11.5.8 | INTEGER (0..255) | RW | ||||||||||
scalar · INTEGER (0..255) · read-write · current Loss in the cable between the ODU and the antenna. Expressed in 10ths of dB. NB: This attribute is ignored for variants with an integral antenna. | |||||||||||||
| SeIRP | 1.3.6.1.4.1.17713.11.5.9 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Effective Isotropic Radiated Power (EIRP) describes the strength of the radio signal leaving the wireless unit. Expressed in 10ths of dBm | |||||||||||||
| SchannelBandwidth | 1.3.6.1.4.1.17713.11.5.11 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This control sets the bandwidth of the transmit and receive radio channels
| |||||||||||||
| SlinkName | 1.3.6.1.4.1.17713.11.5.14 | DisplayString (SIZE (0..63)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..63)) · read-write · current Name of the link allocated by the System Administrator. Used to establish a connection with the correct wireless unit at the other end of the link. NOTE: The link name MUST be the same at both ends of the link. | |||||||||||||
| SsiteName | 1.3.6.1.4.1.17713.11.5.15 | DisplayString (SIZE (0..63)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..63)) · read-write · current This field contains a user-provided description of the site name together with any additional notes | |||||||||||||
| SaccessMethod | 1.3.6.1.4.1.17713.11.5.16 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current ODUs must be configured in pairs before a link can be established. The Access Method attribute determines how the paired ODUs will recognise each other. For the Link Access method, each ODU must be configured with Target MAC Address equal to the MAC Address of the other unit. For the Link Name Access method, both units must be configured with the same Link Name. For the Group Access method, both units must be configured with the same Group ID.
| |||||||||||||
| SgroupID | 1.3.6.1.4.1.17713.11.5.17 | INTEGER (0..255) | RW | ||||||||||
scalar · INTEGER (0..255) · read-write · current When Access Method is set to Group Access, the Group ID identifies all the units belonging to the same group | |||||||||||||
| SiPv6Address | 1.3.6.1.4.1.17713.11.5.18 | DisplayString (SIZE (0..39)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..39)) · read-write · current Internet protocol (IPv6) address. This address is used by the family of Internet protocols to uniquely identify the unit on a network. | |||||||||||||
| SiPVersion | 1.3.6.1.4.1.17713.11.5.20 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current IP protocol selection. Choice of IPv4, IPv6 or Dual.
| |||||||||||||
| SiPv6AutoConfiguredLinkLocalAddress | 1.3.6.1.4.1.17713.11.5.21 | DisplayString (SIZE (0..39)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..39)) · read-only · current The auto configured link local IPv6 address | |||||||||||||
| SiPv6PrefixLength | 1.3.6.1.4.1.17713.11.5.22 | INTEGER (0..128) | RW | ||||||||||
scalar · INTEGER (0..128) · read-write · current IPv6 prefix length | |||||||||||||
| SiPv6GatewayAddress | 1.3.6.1.4.1.17713.11.5.23 | DisplayString (SIZE (0..39)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..39)) · read-write · current The IPv6 address of a device on the current network that is currently acting as an IPv6 network gateway. A gateway acts as an entrance / exit to packets from / to other networks. | |||||||||||||
| SremoteInternetAddressTypeLinked | 1.3.6.1.4.1.17713.11.5.24 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The type of Internet address specified by the associated remoteInternetAddressType.
| |||||||||||||
| SremoteInternetAddressLinked | 1.3.6.1.4.1.17713.11.5.25 | InetAddress | RO | ||||||||||
scalar · InetAddress · read-only · current INET address used to identify the peer wireless unit | |||||||||||||
| SsubbandLowestFrequency | 1.3.6.1.4.1.17713.11.5.26 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Lowest center frequency of the subset of channels. | |||||||||||||
| SsubbandHighestFrequency | 1.3.6.1.4.1.17713.11.5.27 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Highest center frequency of the subset of channels. | |||||||||||||
| SenableTransmission | 1.3.6.1.4.1.17713.11.5.28 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Control for enabling/disabling the radio transmitter of the Master. Note: Use Web Properties to control this feature.
| |||||||||||||
| SantennaSelection | 1.3.6.1.4.1.17713.11.5.29 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Antenna Selection. Choice of Integrated or Connectorized
| |||||||||||||
| StransmitterChannels | 1.3.6.1.4.1.17713.11.5.30 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To select transmitter channel(s) (H,V)
| |||||||||||||
| SwirelessTopology | 1.3.6.1.4.1.17713.11.5.31 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This attribute determines whether the device operates as part of a PTP or an HCMP network topology.
| |||||||||||||
| SconfigurationInstancedTableNumber | 1.3.6.1.4.1.17713.11.5.32 | INTEGER (1..8) | RO | ||||||||||
scalar · INTEGER (1..8) · read-only · current Number of entries in the ConfigurationInstancedTable. | |||||||||||||
| TconfigurationInstancedTable | 1.3.6.1.4.1.17713.11.5.33 | NA | |||||||||||
table · not-accessible · current Instanced Public stats table. | |||||||||||||
| RconfigurationInstancedTableEntry | 1.3.6.1.4.1.17713.11.5.33.1 | NA | |||||||||||
row · not-accessible · current Table ConfigurationInstancedTable | |||||||||||||
| CconfigurationInstancedTableIndex | 1.3.6.1.4.1.17713.11.5.33.1.1 | INTEGER (1..8) | NA | ||||||||||
column · INTEGER (1..8) · not-accessible · current Used to index the ConfigurationInstancedTable. | |||||||||||||
| CremoteInternetAddressType | 1.3.6.1.4.1.17713.11.5.33.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The type of Internet address specified by the associated remoteInternetAddressType.
| |||||||||||||
| CremoteInternetAddress | 1.3.6.1.4.1.17713.11.5.33.1.3 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current INET address used to identify the peer wireless unit | |||||||||||||
| CremoteUnitName | 1.3.6.1.4.1.17713.11.5.33.1.4 | DisplayString (SIZE (0..63)) | RO | ||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current This field contains user-provided name of the peer received over the wireless link | |||||||||||||
| SunitName | 1.3.6.1.4.1.17713.11.5.34 | DisplayString (SIZE (0..63)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..63)) · read-write · current This field contains user-provided name for this unit | |||||||||||||
| SauthorizationMethod | 1.3.6.1.4.1.17713.11.5.35 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Authorization Method to be used - Whitelist or Blacklist
| |||||||||||||
| SremoteUnitNameLinked | 1.3.6.1.4.1.17713.11.5.36 | DisplayString (SIZE (0..63)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..63)) · read-only · current This field contains user-provided name of the peer received over the wireless link | |||||||||||||
| Nethernet | 1.3.6.1.4.1.17713.11.6 | ||||||||||||
| SmainPSUPortAutoNegotiation | 1.3.6.1.4.1.17713.11.6.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This controls whether the local Ethernet interface configuration is automatically negotiated or forced. Do not use a forced setting together with auto negotiation at the Ethernet link partner. If you want to run your Ethernet link at a fixed speed and duplex then you would normally leave auto negotiation enabled and only enable the single Auto Neg Advertisement option that you want the link to run in - FORCING ETHERNET CONFIGURATION IS A LAST RESORT WHICH SHOULD ONLY BE PERFORMED IF YOU ARE HAVING PROBLEMS WITH AUTO NEGOTIATION - AND YOU MUST ENSURE THAT YOU CONFIGURE BOTH THIS UNIT AND THE ETHERNET LINK PARTNER TO WHICH IT IS CONNECTED IDENTICALLY (THE LINK PARTNER MUST NOT HAVE AUTO NEGOTIATION ENABLED EITHER, OTHERWISE A DUPLEX MISMATCH WILL OCCUR). NB: The new setting will only take effect after a system reboot.
| |||||||||||||
| SmainPSUPortAutoNegAdvertisement | 1.3.6.1.4.1.17713.11.6.2 | Bits | RO | ||||||||||
scalar · Bits · read-only · current This sets the different Ethernet configurations that will be advertised during auto negotiation. Note the new setting will only take effect after a system reboot. WARNING: Duplex mismatch may result if both ends of the Ethernet link do not have the same settings. Do not auto negotiation together with a fixed setting at the Ethernet link partner. WARNING: Make sure that you select option(s) that you know your connected equipment can cater for!
| |||||||||||||
| SmainPSUPortAutoMdix | 1.3.6.1.4.1.17713.11.6.3 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This enables/disables the Auto MDI/MDIX capability. NB: The new setting will only take effect after a system reboot
| |||||||||||||
| SmainPSUPortStatus | 1.3.6.1.4.1.17713.11.6.4 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current status of the Main PSU Ethernet link. NB: a change of state may generate an SNMP trap and/or SMTP email alert
| |||||||||||||
| SmainPSUPortSpeedAndDuplex | 1.3.6.1.4.1.17713.11.6.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The current speed and duplex of the Main PSU Ethernet link
| |||||||||||||
| SdataPortWirelessDownAlert | 1.3.6.1.4.1.17713.11.6.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current When enabled, this causes the Ethernet link to be dropped briefly when the wireless link drops. This is so that spanning tree algorithms can quickly detect that there is a problem.
| |||||||||||||
| SuseVLANForManagementInterfaces | 1.3.6.1.4.1.17713.11.6.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This controls whether the management interfaces (WWW/SNMP/SMTP/SNTP) use VLAN tags or not. NB: The new setting will only take effect after a system reboot
| |||||||||||||
| SvLANManagementPriority | 1.3.6.1.4.1.17713.11.6.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This VLAN Priority (0-7) will be included in packets generated by the management interfaces
| |||||||||||||
| SvLANManagementVID | 1.3.6.1.4.1.17713.11.6.11 | INTEGER (0..4094) | RW | ||||||||||
scalar · INTEGER (0..4094) · read-write · current This VLAN VID (0-4094) will be included in packets generated by the management interfaces. Note the new setting will only take effect after a system reboot | |||||||||||||
| SauxPortStatus | 1.3.6.1.4.1.17713.11.6.12 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current status of the Aux Ethernet link. NB: a change of state may generate an SNMP trap and/or SMTP email alert
| |||||||||||||
| SauxPortSpeedAndDuplex | 1.3.6.1.4.1.17713.11.6.13 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The current speed and duplex of the Aux Ethernet link
| |||||||||||||
| SethernetPriorityTableNumber | 1.3.6.1.4.1.17713.11.6.14 | INTEGER (9) | RO | ||||||||||
scalar · INTEGER (9) · read-only · current Number of entries in the vLANPriorityTable. | |||||||||||||
| TethernetPriorityTable | 1.3.6.1.4.1.17713.11.6.15 | NA | |||||||||||
table · not-accessible · current A priority queue mapping table. This is a list of packet queues indexed by Ethernet priority. | |||||||||||||
| RethernetPriorityTableEntry | 1.3.6.1.4.1.17713.11.6.15.1 | NA | |||||||||||
| CethernetPriorityTableIndex | 1.3.6.1.4.1.17713.11.6.15.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current Ethernet priority flag, used to index values in the ethernetPriorityTable
| |||||||||||||
| CethernetPriorityQueueMapping | 1.3.6.1.4.1.17713.11.6.15.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Configures the classification of this Ethernet priority (also known as IEEE 802.1p value) to an egress queue at the wireless port
| |||||||||||||
| Sl2CPPriorityTableNumber | 1.3.6.1.4.1.17713.11.6.16 | INTEGER (5) | RO | ||||||||||
scalar · INTEGER (5) · read-only · current Number of entries in the l2CPPriorityTable. | |||||||||||||
| Tl2CPPriorityTable | 1.3.6.1.4.1.17713.11.6.17 | NA | |||||||||||
table · not-accessible · current A priority queue mapping table. This is a list of packet queues indexed by L2CP priority. | |||||||||||||
| Rl2CPPriorityTableEntry | 1.3.6.1.4.1.17713.11.6.17.1 | NA | |||||||||||
| Cl2CPPriorityTableIndex | 1.3.6.1.4.1.17713.11.6.17.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current L2CP priority flag, used to index values in the l2CPPriorityTable
| |||||||||||||
| Cl2CPPriorityQueueMapping | 1.3.6.1.4.1.17713.11.6.17.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Configures the classification of this layer two control protocol (L2CP) to an egress queue at the wireless port
| |||||||||||||
| SiPDSCPPriorityTableNumber | 1.3.6.1.4.1.17713.11.6.18 | INTEGER (64) | RO | ||||||||||
scalar · INTEGER (64) · read-only · current Number of entries in the iPDSCPPriorityTable. | |||||||||||||
| TiPDSCPPriorityTable | 1.3.6.1.4.1.17713.11.6.19 | NA | |||||||||||
table · not-accessible · current A priority queue mapping table. This is a list of packet queues indexed by L3 IP DSCP priority. | |||||||||||||
| RiPDSCPPriorityTableEntry | 1.3.6.1.4.1.17713.11.6.19.1 | NA | |||||||||||
| CiPDSCPPriorityTableIndex | 1.3.6.1.4.1.17713.11.6.19.1.1 | INTEGER (1..64) | NA | ||||||||||
column · INTEGER (1..64) · not-accessible · current IP DSCP priority flag, used to index values in the iPDSCPPriorityTable | |||||||||||||
| CiPDSCPPriorityQueueMapping | 1.3.6.1.4.1.17713.11.6.19.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Configures the classification of this IP differentiated services code point (DSCP) value to an egress queue at the wireless port
| |||||||||||||
| SmPLSTCPriorityTableNumber | 1.3.6.1.4.1.17713.11.6.20 | INTEGER (8) | RO | ||||||||||
scalar · INTEGER (8) · read-only · current Number of entries in the mPLSTCPriorityTable. | |||||||||||||
| TmPLSTCPriorityTable | 1.3.6.1.4.1.17713.11.6.21 | NA | |||||||||||
table · not-accessible · current A priority queue mapping table. This is a list of priority queues indexed by MPLS TC priority. | |||||||||||||
| RmPLSTCPriorityTableEntry | 1.3.6.1.4.1.17713.11.6.21.1 | NA | |||||||||||
| CmPLSTCPriorityTableIndex | 1.3.6.1.4.1.17713.11.6.21.1.1 | INTEGER (1..8) | NA | ||||||||||
column · INTEGER (1..8) · not-accessible · current MPLS TC priority flag, used to index values in the mPLSTCPriorityTable | |||||||||||||
| CmPLSTCPriorityQueueMapping | 1.3.6.1.4.1.17713.11.6.21.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Configures the classification of this MPLS traffic class (the field formerly known as EXP) to an egress queue at the wireless port
| |||||||||||||
| SmanagementPortWirelessDownAlert | 1.3.6.1.4.1.17713.11.6.23 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current When enabled, this causes the management link to be dropped briefly when the wireless link drops. This is so that spanning tree algorithms can quickly detect that there is a problem.
| |||||||||||||
| SqOSPriorityScheme | 1.3.6.1.4.1.17713.11.6.24 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Selects classification based on fields in the Ethernet header (Layer 2) or in the Network header (Layer 3). The unit recognises two network layer protocols: IP and MPLS
| |||||||||||||
| SunknownNetworkPriorityQueueMapping | 1.3.6.1.4.1.17713.11.6.25 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configures the classification of unknown network protocols to an egress queue at the wireless port. Unknown means something other than IP and MPLS
| |||||||||||||
| SdSCPManagementPriority | 1.3.6.1.4.1.17713.11.6.26 | INTEGER (0..63) | RO | ||||||||||
scalar · INTEGER (0..63) · read-only · current This Differentiated Services Code Point value will be inserted in the IP Header of all IP Datagrams transmitted by the management interfaces | |||||||||||||
| SdataBridgingStatusLinked | 1.3.6.1.4.1.17713.11.6.27 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current status of Ethernet Data traffic bridging over the wireless link
| |||||||||||||
| SmainPSUPortAllocation | 1.3.6.1.4.1.17713.11.6.28 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Indicates the service or services supported by the Main PSU Ethernet port
| |||||||||||||
| SauxPortAllocation | 1.3.6.1.4.1.17713.11.6.29 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Indicates the service or services supported by the Aux Ethernet port
| |||||||||||||
| SsFPPortAllocation | 1.3.6.1.4.1.17713.11.6.30 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Indicates the service or services supported by the SFP Ethernet port
| |||||||||||||
| SdataPortPauseFrames | 1.3.6.1.4.1.17713.11.6.31 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Controls whether the bridge tunnels or discards Layer 2 PAUSE frames arriving at the Data Port. Such frames are identified by the destination MAC Address being equal to 01-80-C2-00-00-01
| |||||||||||||
| SsFPPortAutoNegotiation | 1.3.6.1.4.1.17713.11.6.32 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This controls whether the local SFP Ethernet interface configuration is automatically negotiated or forced. Do not use a forced setting together with auto negotiation at the Ethernet link partner. If you want to run your Ethernet link at a fixed speed and duplex then you would normally leave auto negotiation enabled and only enable the single Auto Neg Advertisement option that you want the link to run in - FORCING ETHERNET CONFIGURATION IS A LAST RESORT WHICH SHOULD ONLY BE PERFORMED IF YOU ARE HAVING PROBLEMS WITH AUTO NEGOTIATION - AND YOU MUST ENSURE THAT YOU CONFIGURE BOTH THIS UNIT AND THE ETHERNET LINK PARTNER TO WHICH IT IS CONNECTED IDENTICALLY (THE LINK PARTNER MUST NOT HAVE AUTO NEGOTIATION ENABLED EITHER, OTHERWISE A DUPLEX MISMATCH WILL OCCUR). NB: The new setting will only take effect after a system reboot.
| |||||||||||||
| SsFPPortAutoNegAdvertisement | 1.3.6.1.4.1.17713.11.6.33 | Bits | RO | ||||||||||
scalar · Bits · read-only · current This sets the different SFP Ethernet configurations that will be advertised during auto negotiation. Note the new setting will only take effect after a system reboot. WARNING: Duplex mismatch may result if both ends of the Ethernet link do not have the same settings. Do not auto negotiation together with a fixed setting at the Ethernet link partner. WARNING: Make sure that you select option(s) that you know your connected equipment can cater for!
| |||||||||||||
| SsFPPortAutoMdix | 1.3.6.1.4.1.17713.11.6.34 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This enables/disables the Auto MDI/MDIX capability. NB: The new setting will only take effect after a system reboot
| |||||||||||||
| SsFPPortStatus | 1.3.6.1.4.1.17713.11.6.35 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current status of the SFP Ethernet link. NB: a change of state may generate an SNMP trap and/or SMTP email alert
| |||||||||||||
| SsFPPortSpeedAndDuplex | 1.3.6.1.4.1.17713.11.6.36 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The current speed and duplex of the SFP Ethernet link
| |||||||||||||
| SauxPortPowerOverEthernetOutput | 1.3.6.1.4.1.17713.11.6.37 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The state of the Power Over Ethernet (PoE) output of the Aux port. Enabling PoE output may lead to system instability; please refer to the User Guide before enabling this control
| |||||||||||||
| SauxPortPowerOverEthernetOutputStatus | 1.3.6.1.4.1.17713.11.6.38 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current status of the Power Over Ethernet (PoE) output of the Aux port
| |||||||||||||
| SsyncETracking | 1.3.6.1.4.1.17713.11.6.39 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls whether Synchronous Ethernet (SyncE) network synchronization is enabled.
| |||||||||||||
| SsyncEEquipmentClock | 1.3.6.1.4.1.17713.11.6.40 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current EEC-Option 1 applies to synchronous Ethernet equipments that are designed to interwork with networks optimized for the 2048-kbit/s hierarchy. Corresponds to ITU-T G.813 Option 1; EEC-Option 2 applies to synchronous Ethernet equipments that are designed to interwork with networks optimized for the 1544-kbit/s hierarchy. Corresponds to Type IV clock from ITU-T G.812.
| |||||||||||||
| SmainPSUPortQLRxOverwrite | 1.3.6.1.4.1.17713.11.6.41 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Override for the Synchronous Ethernet (SyncE) received Quality Level (QL) on the main PSU port.
| |||||||||||||
| SmainPSUPortSSMTx | 1.3.6.1.4.1.17713.11.6.42 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls whether the Synchronous Ethernet (SyncE) Quality Level (QL) is transmitted on the Main PSU port
| |||||||||||||
| SsFPPortSSMTx | 1.3.6.1.4.1.17713.11.6.43 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls whether the Synchronous Ethernet (SyncE) Quality Level (QL) is transmitted on the SFP port
| |||||||||||||
| SauxPortSSMTx | 1.3.6.1.4.1.17713.11.6.44 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls whether the Synchronous Ethernet (SyncE) Quality Level (QL) is transmitted on the Aux port
| |||||||||||||
| SsyncETrackingState | 1.3.6.1.4.1.17713.11.6.45 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The current state of Synchronous Ethernet (SyncE) network synchronization.
| |||||||||||||
| SmainPSUPortQLRx | 1.3.6.1.4.1.17713.11.6.46 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The Synchronous Ethernet (SyncE) Quality Level (QL) currently being received on the main PSU port.
| |||||||||||||
| SauxPortQLRx | 1.3.6.1.4.1.17713.11.6.47 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The Synchronous Ethernet (SyncE) Quality Level (QL) currently being received on the auxiliary port.
| |||||||||||||
| SsFPPortQLRx | 1.3.6.1.4.1.17713.11.6.48 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The Synchronous Ethernet (SyncE) Quality Level (QL) currently being received on the SFP port.
| |||||||||||||
| SmainPSUPortQLTx | 1.3.6.1.4.1.17713.11.6.49 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The Synchronous Ethernet (SyncE) transmit Quality Level (QL) of the main PSU port.
| |||||||||||||
| SauxPortQLTx | 1.3.6.1.4.1.17713.11.6.50 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The Synchronous Ethernet (SyncE) transmit Quality Level (QL) of the auxiliary port.
| |||||||||||||
| SsFPPortQLTx | 1.3.6.1.4.1.17713.11.6.51 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The Synchronous Ethernet (SyncE) transmit Quality Level (QL) of the SFP port.
| |||||||||||||
| SmainPSUPortSyncEMasterSlaveStatus | 1.3.6.1.4.1.17713.11.6.52 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The main PSU port Synchronous Ethernet (SyncE) Master/Slave status
| |||||||||||||
| SauxPortSyncEMasterSlaveStatus | 1.3.6.1.4.1.17713.11.6.53 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The auxiliary port Synchronous Ethernet (SyncE) Master/Slave status
| |||||||||||||
| SsFPPortSyncEMasterSlaveStatus | 1.3.6.1.4.1.17713.11.6.54 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The SFP port Synchronous Ethernet (SyncE) Master/Slave status
| |||||||||||||
| SmainPSUPortGigabitMasterSlaveStatus | 1.3.6.1.4.1.17713.11.6.55 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The main PSU port Gigabit Ethernet Master/Slave status
| |||||||||||||
| SauxPortGigabitMasterSlaveStatus | 1.3.6.1.4.1.17713.11.6.56 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The auxiliary port Gigabit Ethernet Master/Slave status
| |||||||||||||
| SsFPPortGigabitMasterSlaveStatus | 1.3.6.1.4.1.17713.11.6.57 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The SFP port Gigabit Ethernet Master/Slave status
| |||||||||||||
| StransparentClock | 1.3.6.1.4.1.17713.11.6.58 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This control enables the Precision Time Protocol (IEEE-1588) Transparent Clock. Once enabled the unit will modify the correction field in PTP event messages to take account of the time these frames have been resident in this system. This will happen for all PTP frames at Layer 2 & Layer 3 (IPv4 & IPv6) unless a transparent clock VLAN is enabled.
| |||||||||||||
| StransparentClockVLAN | 1.3.6.1.4.1.17713.11.6.59 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current If All is selected then all PTP frames will have their correction fields modified with the residence time. If an S-TAG or C-TAG is selected, only frames with this VLAN tag and matching the VLAN ID in the Transparent Clock VID will have their correction fields modified.
| |||||||||||||
| StransparentClockVID | 1.3.6.1.4.1.17713.11.6.60 | INTEGER (0..4094) | RW | ||||||||||
scalar · INTEGER (0..4094) · read-write · current The VLAN ID which frames must match if they are to be corrected. Only valid when an S-TAG or C-TAG has been selected. | |||||||||||||
| SmainPSUPortAcceptedQLRx | 1.3.6.1.4.1.17713.11.6.61 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The Synchronous Ethernet (SyncE) Quality Level (QL) currently accepted (validated) on the main PSU port.
| |||||||||||||
| SauxPortAcceptedQLRx | 1.3.6.1.4.1.17713.11.6.62 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The Synchronous Ethernet (SyncE) Quality Level (QL) currently accepted (validated) on the auxiliary port.
| |||||||||||||
| SsFPPortAcceptedQLRx | 1.3.6.1.4.1.17713.11.6.63 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The Synchronous Ethernet (SyncE) Quality Level (QL) currently accepted (validated) on the SFP port.
| |||||||||||||
| SmainPSUPortSyncERxStatus | 1.3.6.1.4.1.17713.11.6.64 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The Synchronous Ethernet (SyncE) Receive Status of the main PSU port
| |||||||||||||
| SauxPortSyncERxStatus | 1.3.6.1.4.1.17713.11.6.65 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The Synchronous Ethernet (SyncE) Receive Status of the auxiliary port
| |||||||||||||
| SsFPPortSyncERxStatus | 1.3.6.1.4.1.17713.11.6.66 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The Synchronous Ethernet (SyncE) Receive Status of the SFP port
| |||||||||||||
| SnIDULanPortStatus | 1.3.6.1.4.1.17713.11.6.67 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current status of the NIDU LAN Ethernet link. NB: a change of state may generate an SNMP trap and/or SMTP email alert
| |||||||||||||
| SnIDULanPortSpeedAndDuplex | 1.3.6.1.4.1.17713.11.6.68 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The current speed and duplex of the Ethernet link to the NIDU LAN Port
| |||||||||||||
| SoOBPriorityQueueMapping | 1.3.6.1.4.1.17713.11.6.69 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configures the classification of traffic to an egress queue at the wireless port
| |||||||||||||
| SnIDULanPortAutoNegotiation | 1.3.6.1.4.1.17713.11.6.70 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This controls whether the local Ethernet interface configuration is automatically negotiated or forced. Do not use a forced setting together with auto negotiation at the Ethernet link partner. If you want to run your Ethernet link at a fixed speed and duplex then you would normally leave auto negotiation enabled and only enable the single Auto Neg Advertisement option that you want the link to run in - FORCING ETHERNET CONFIGURATION IS A LAST RESORT WHICH SHOULD ONLY BE PERFORMED IF YOU ARE HAVING PROBLEMS WITH AUTO NEGOTIATION - AND YOU MUST ENSURE THAT YOU CONFIGURE BOTH THIS UNIT AND THE ETHERNET LINK PARTNER TO WHICH IT IS CONNECTED IDENTICALLY (THE LINK PARTNER MUST NOT HAVE AUTO NEGOTIATION ENABLED EITHER, OTHERWISE A DUPLEX MISMATCH WILL OCCUR). NB: The new setting will only take effect after a system reboot.
| |||||||||||||
| SnIDULanPortAutoNegAdvertisement | 1.3.6.1.4.1.17713.11.6.71 | Bits | RO | ||||||||||
scalar · Bits · read-only · current This sets the different Ethernet configurations that will be advertised during auto negotiation. Note the new setting will only take effect after a system reboot. WARNING: Duplex mismatch may result if both ends of the Ethernet link do not have the same settings. Do not auto negotiation together with a fixed setting at the Ethernet link partner. WARNING: Make sure that you select option(s) that you know your connected equipment can cater for!
| |||||||||||||
| SnIDULanPortAutoMdix | 1.3.6.1.4.1.17713.11.6.72 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This enables/disables the Auto MDI/MDIX capability. NB: The new setting will only take effect after a system reboot
| |||||||||||||
| SnIDULanPortGigabitMasterSlaveStatus | 1.3.6.1.4.1.17713.11.6.73 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The NIDU LAN port Gigabit Ethernet Master/Slave status
| |||||||||||||
| StxMABFrames | 1.3.6.1.4.1.17713.11.6.74 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Number of MAB frames transmitted | |||||||||||||
| SmanagementNetworkAccessEnabled | 1.3.6.1.4.1.17713.11.6.75 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current When enabled the local Out-of-Band interface can be used to access the remote management network. If not enabled the local management agent can still be accessed from the remote management network and the local Out-of-Band interface
| |||||||||||||
| StransparentClockPort | 1.3.6.1.4.1.17713.11.6.81 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current IEEE 1588 Transparent Clock source
| |||||||||||||
| SsyncESlavePort | 1.3.6.1.4.1.17713.11.6.82 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Select a Sync E Slave Port
| |||||||||||||
| SsFPPortQLRxOverwrite | 1.3.6.1.4.1.17713.11.6.83 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Override for the Synchronous Ethernet (SyncE) received Quality Level (QL) on the SFP Port.
| |||||||||||||
| SethernetInstancedTableNumber | 1.3.6.1.4.1.17713.11.6.84 | INTEGER (1..8) | RO | ||||||||||
scalar · INTEGER (1..8) · read-only · current Number of entries in the ethernetInstancedTable. | |||||||||||||
| TethernetInstancedTable | 1.3.6.1.4.1.17713.11.6.85 | NA | |||||||||||
table · not-accessible · current Instanced table showing the ethernet status | |||||||||||||
| RethernetInstancedTableEntry | 1.3.6.1.4.1.17713.11.6.85.1 | NA | |||||||||||
| CethernetInstancedTableIndex | 1.3.6.1.4.1.17713.11.6.85.1.1 | INTEGER (1..8) | NA | ||||||||||
column · INTEGER (1..8) · not-accessible · current Used to index the ethernetInstancedTable. | |||||||||||||
| CdataBridgingStatus | 1.3.6.1.4.1.17713.11.6.85.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current status of Ethernet Data traffic bridging over the wireless link
| |||||||||||||
| SethernetStatisticsTableNumber | 1.3.6.1.4.1.17713.11.6.86 | INTEGER (1..3) | RO | ||||||||||
scalar · INTEGER (1..3) · read-only · current Number of entries in the ethernetStatisticsTable. | |||||||||||||
| TethernetStatisticsTable | 1.3.6.1.4.1.17713.11.6.87 | NA | |||||||||||
table · not-accessible · current Instanced table showing the ethernet statistics | |||||||||||||
| RethernetStatisticsTableEntry | 1.3.6.1.4.1.17713.11.6.87.1 | NA | |||||||||||
| CethernetStatisticsTableIndex | 1.3.6.1.4.1.17713.11.6.87.1.1 | INTEGER (1..3) | NA | ||||||||||
column · INTEGER (1..3) · not-accessible · current Used to index the ethernetStatisticsTable. | |||||||||||||
| CethernetStatisticsDataSource | 1.3.6.1.4.1.17713.11.6.87.1.2 | OBJECT IDENTIFIER | RO | ||||||||||
column · OBJECT IDENTIFIER · read-only · current This object identifies the ethernet interface that this ethernetStatistics entry is configured to report. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 2233 [17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. | |||||||||||||
| CethernetStatisticsRxOctets | 1.3.6.1.4.1.17713.11.6.87.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Total number of octets (excluding framing bits but including FCS octets) received from the LAN in good packets | |||||||||||||
| CethernetStatisticsRxFrames | 1.3.6.1.4.1.17713.11.6.87.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Total number of packets (including bad packets, broadcast packets, and multicast packets) received | |||||||||||||
| CethernetStatisticsRxBroadcasts | 1.3.6.1.4.1.17713.11.6.87.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of good and bad broadcast packets received from the LAN. Note that this does not include multicast packets. | |||||||||||||
| CethernetStatisticsRxFramesWithError | 1.3.6.1.4.1.17713.11.6.87.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of frames received with errors. The errors can be a frame check sequence (CRC) error, an alignment error or an incorrect frame length | |||||||||||||
| CethernetStatisticsRxFramesUndersize | 1.3.6.1.4.1.17713.11.6.87.1.7 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of short frames (<64 Bytes) received from the LAN with or without a valid CRC | |||||||||||||
| CethernetStatisticsRxFramesOversize | 1.3.6.1.4.1.17713.11.6.87.1.8 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of oversize frames received from the LAN with or without a valid CRC | |||||||||||||
| CethernetStatisticsTxOctets | 1.3.6.1.4.1.17713.11.6.87.1.9 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Total number of octets transmitted to the LAN | |||||||||||||
| CethernetStatisticsTxFrames | 1.3.6.1.4.1.17713.11.6.87.1.10 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Total number of frames transmitted to the LAN | |||||||||||||
| CethernetStatisticsTxBroadcasts | 1.3.6.1.4.1.17713.11.6.87.1.11 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of broadcast frames transmitted to the LAN. Note that this does not include multicast packets. | |||||||||||||
| NtDM | 1.3.6.1.4.1.17713.11.7 | ||||||||||||
| StDMInterfaceControl | 1.3.6.1.4.1.17713.11.7.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The line interface type. If this is set to 'None' then the TDM interfaces are disabled, and the TDM settings will be ignored.
| |||||||||||||
| StDMInterfaceStatus | 1.3.6.1.4.1.17713.11.7.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current @Current status of the connection to the TDM Box. A state of 'Up' on a green background indicates that the TDM Box is connected OK. When connecting a TDM Box only the Main Ethernet port should be used
| |||||||||||||
| StDMEnabledChannels | 1.3.6.1.4.1.17713.11.7.3 | INTEGER (0..8) | RO | ||||||||||
scalar · INTEGER (0..8) · read-only · current The number of TDM channels enabled in the system | |||||||||||||
| StdmTableNumber | 1.3.6.1.4.1.17713.11.7.4 | INTEGER (1..8) | RO | ||||||||||
scalar · INTEGER (1..8) · read-only · current Number of entries in the TdmTable | |||||||||||||
| TtdmTable | 1.3.6.1.4.1.17713.11.7.5 | NA | |||||||||||
table · not-accessible · current A table storing a configuration and status for each TDM channel | |||||||||||||
| RtdmTableEntry | 1.3.6.1.4.1.17713.11.7.5.1 | NA | |||||||||||
| CtdmTableIndex | 1.3.6.1.4.1.17713.11.7.5.1.1 | INTEGER (1..8) | NA | ||||||||||
column · INTEGER (1..8) · not-accessible · current TDM Channel flag, used to index channels in the TdmTable | |||||||||||||
| CtDMChannelStatus | 1.3.6.1.4.1.17713.11.7.5.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current status of the TDM channels. A value of 0 indicates that a TDM channel is established
| |||||||||||||
| CtDMChannelLineCode | 1.3.6.1.4.1.17713.11.7.5.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The line code setting of the TDM interfaces. This must match the setting of the device connected to an interface
| |||||||||||||
| CtDMChannelCableLength | 1.3.6.1.4.1.17713.11.7.5.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The lengths of the cables connected to the TDM interfaces, measured in feet
| |||||||||||||
| CtDMChannelLoopback | 1.3.6.1.4.1.17713.11.7.5.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The loopback status of TDM channels. This is intended for installation testing and should be set to 'None' for normal operation. The wire connections to a unit can be tested by applying a 'Copper' loopback to the local unit. The wireless connection to the remote unit can be tested by applying a 'Wireless' loopback to the remote unit with no loopback on the local unit. NB: a change of state may generate an SNMP trap and/or SMTP email alert
| |||||||||||||
| StDMConfigurationMismatch | 1.3.6.1.4.1.17713.11.7.6 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current status of the configuration of the TDM Box. A state of 'Ok' on a green background indicates that the TDM Box configuration is matched OK with the remote end.
| |||||||||||||
| SlowestTDMModulationMode | 1.3.6.1.4.1.17713.11.7.7 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The lowest modulation mode at which tdm data will be sent. The effective lowest modulation mode is displayed in the TDM Configuration page
| |||||||||||||
| Nlicense | 1.3.6.1.4.1.17713.11.8 | ||||||||||||
| SregulatoryBand | 1.3.6.1.4.1.17713.11.8.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The Regulatory Band prohibits the wireless unit from operating outside the regulated limits. An invalid Regulatory Band may be caused by a missing or incorrect License Key, a corrupt MAC Address or an attempt to configure a Regulatory Band not allowed by the License Key or an execution of Reset Configuration. NB: a change of state may generate an SNMP trap and/or SMTP email alert.
| |||||||||||||
| SproductVariant | 1.3.6.1.4.1.17713.11.8.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The product variant
| |||||||||||||
| SproductName | 1.3.6.1.4.1.17713.11.8.3 | DisplayString (SIZE (0..63)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..63)) · read-only · current Name of the product variant | |||||||||||||
| SfrequencyVariant | 1.3.6.1.4.1.17713.11.8.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The hardware frequency variant
| |||||||||||||
| SsNMPv3Enable | 1.3.6.1.4.1.17713.11.8.9 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current SNMPv3 availability control
| |||||||||||||
| SlicenseVersion | 1.3.6.1.4.1.17713.11.8.12 | INTEGER (1) | RO | ||||||||||
scalar · INTEGER (1) · read-only · current The license key version. | |||||||||||||
| SlicenseUnitSerialNumber | 1.3.6.1.4.1.17713.11.8.13 | DisplayString (SIZE (0..11)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..11)) · read-only · current The unit serial number. | |||||||||||||
| SlicenseIssueNumber | 1.3.6.1.4.1.17713.11.8.15 | INTEGER (0..2147483647) | RO | ||||||||||
scalar · INTEGER (0..2147483647) · read-only · current The license key issue number for this unit. | |||||||||||||
| SlicenseCountry | 1.3.6.1.4.1.17713.11.8.16 | DisplayString (SIZE (0..103)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..103)) · read-only · current The country in which this unit is licensed to operate. | |||||||||||||
| SlicenseNumberOfRegulatoryBands | 1.3.6.1.4.1.17713.11.8.17 | INTEGER (0..32) | RO | ||||||||||
scalar · INTEGER (0..32) · read-only · current The number of regulatory bands for which the unit is licensed to operate. | |||||||||||||
| TlicenseRegulatoryBandsTable | 1.3.6.1.4.1.17713.11.8.18 | NA | |||||||||||
| RlicenseRegulatoryBandsTableEntry | 1.3.6.1.4.1.17713.11.8.18.1 | NA | |||||||||||
row · not-accessible · current Table LicenseRegulatoryBandsTable | |||||||||||||
| ClicenseRegulatoryBandsTableIndex | 1.3.6.1.4.1.17713.11.8.18.1.1 | INTEGER (1..32) | NA | ||||||||||
column · INTEGER (1..32) · not-accessible · current License regulatory bands, used to index the LicenseRegulatoryBandsTable. | |||||||||||||
| ClicenseRegulatoryBandsList | 1.3.6.1.4.1.17713.11.8.18.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The list of regulatory bands for which the unit is licensed to operate. A regulatory band prohibits the wireless unit from operating outside the regulated limits. An invalid regulatory band indicates a corrupted license key. NB: a change of state may generate an SNMP trap and/or SMTP email alert.
| |||||||||||||
| SlicenseBandwidthCap | 1.3.6.1.4.1.17713.11.8.20 | INTEGER (0..2147483647) | RO | ||||||||||
scalar · INTEGER (0..2147483647) · read-only · current The wireless link bandwidth cap in MHz. Zero indicates no bandwidth cap. | |||||||||||||
| SlicenseEncryption | 1.3.6.1.4.1.17713.11.8.21 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The license key encryption algorithms available.
| |||||||||||||
| SlicenseSecurityLevel | 1.3.6.1.4.1.17713.11.8.22 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The license key security level.
| |||||||||||||
| SlicenseGroupAccess | 1.3.6.1.4.1.17713.11.8.23 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The license key group access setting. Note that for HCMP topology, license group access must be enabled.
| |||||||||||||
| SlicenseOOBManagementSupport | 1.3.6.1.4.1.17713.11.8.24 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The license key Out-Of-Band (OOB) support setting.
| |||||||||||||
| SlicenseSFPPortSupport | 1.3.6.1.4.1.17713.11.8.25 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The license key Ethernet SFP Port support setting.
| |||||||||||||
| SlicenseAuxiliaryPortSupport | 1.3.6.1.4.1.17713.11.8.26 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The license key Ethernet Auxiliary Port support setting.
| |||||||||||||
| SlicenseCapacity | 1.3.6.1.4.1.17713.11.8.27 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The license key capacity. Note that for HCMP topology, license capacity must be full.
| |||||||||||||
| SlicenseMaxNumberOfTDMChannels | 1.3.6.1.4.1.17713.11.8.28 | INTEGER (0..8) | RO | ||||||||||
scalar · INTEGER (0..8) · read-only · current The license key maximum TDM channels setting. Zero indicates TDM not available. | |||||||||||||
| SlicenseIEEE1588Support | 1.3.6.1.4.1.17713.11.8.29 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The license key IEEE-1588 support setting.
| |||||||||||||
| SlicenseSyncESupport | 1.3.6.1.4.1.17713.11.8.30 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The license key SyncE support setting.
| |||||||||||||
| SlicenseIPv6Support | 1.3.6.1.4.1.17713.11.8.31 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The license key IPv6 support setting.
| |||||||||||||
| SlicenseMinimumFirmwareVersion | 1.3.6.1.4.1.17713.11.8.32 | DisplayString (SIZE (0..23)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..23)) · read-only · current The minimum firmware version required to support this license key. | |||||||||||||
| SlicenseFullCapabilityTrialStatus | 1.3.6.1.4.1.17713.11.8.33 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The license key full capability trial period status.
| |||||||||||||
| SlicenseRemainingTrialPeriod | 1.3.6.1.4.1.17713.11.8.34 | INTEGER (0..31536000) | RO | ||||||||||
scalar · INTEGER (0..31536000) · read-only · current The remaining time for the license key full capability trial period. | |||||||||||||
| SlicenseRemainingTrialPeriodAlarm | 1.3.6.1.4.1.17713.11.8.35 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current If the full capability trial license period is about to expire then purchase a license upgrade from your reseller.
| |||||||||||||
| ScapacityVariantMismatchLinked | 1.3.6.1.4.1.17713.11.8.36 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The remote node of this link has a lower link capacity. Operating with a reduced effective link capacity.
| |||||||||||||
| SlicenseTDDSyncSupport | 1.3.6.1.4.1.17713.11.8.37 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The license key TDD Synchronization support setting.
| |||||||||||||
| SlicenseMaxLinkRange | 1.3.6.1.4.1.17713.11.8.38 | INTEGER (0..2499) | RO | ||||||||||
scalar · INTEGER (0..2499) · read-only · current Maximum licensed range for the wireless link in tenths of km. A value of zero indicates that the maximum link range is not limited by the license. | |||||||||||||
| SlicenseTrialPeriod | 1.3.6.1.4.1.17713.11.8.39 | INTEGER (0..365) | RO | ||||||||||
scalar · INTEGER (0..365) · read-only · current The license key maximum trial period, in days. | |||||||||||||
| SlicenseRARSupport | 1.3.6.1.4.1.17713.11.8.40 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The license key Radio Aware Routing support setting.
| |||||||||||||
| SlicenseGasGroup | 1.3.6.1.4.1.17713.11.8.41 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The HAZLOC/ATEX Configuration of this unit. The Gas Group is configured by the license key.
| |||||||||||||
| SlicenseLongMinimumFirmwareVersion | 1.3.6.1.4.1.17713.11.8.42 | DisplayString (SIZE (0..15)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..15)) · read-only · current The minimum long firmware version required to support this license key. | |||||||||||||
| SlicenseHCMPSupport | 1.3.6.1.4.1.17713.11.8.43 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The license High Capacity MultiPoint support setting
| |||||||||||||
| SlicenseInstancedTableNumber | 1.3.6.1.4.1.17713.11.8.44 | INTEGER (1..8) | RO | ||||||||||
scalar · INTEGER (1..8) · read-only · current Number of entries in the licenseInstancedTable. | |||||||||||||
| TlicenseInstancedTable | 1.3.6.1.4.1.17713.11.8.45 | NA | |||||||||||
table · not-accessible · current Instanced license table | |||||||||||||
| RlicenseInstancedTableEntry | 1.3.6.1.4.1.17713.11.8.45.1 | NA | |||||||||||
| ClicenseInstancedTableIndex | 1.3.6.1.4.1.17713.11.8.45.1.1 | INTEGER (1..8) | NA | ||||||||||
column · INTEGER (1..8) · not-accessible · current Used to index the LicenseInstancedTable. | |||||||||||||
| CcapacityVariantMismatch | 1.3.6.1.4.1.17713.11.8.45.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The remote node of this link has a lower link capacity. Operating with a reduced effective link capacity.
| |||||||||||||
| SlicenseTLSRekey | 1.3.6.1.4.1.17713.11.8.46 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The license TLS Rekey support setting
| |||||||||||||
| SlicenseAdvanceHCMPSupport | 1.3.6.1.4.1.17713.11.8.47 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The license Advance High Capacity MultiPoint support setting
| |||||||||||||
| SlicenseMinFirmwareVersionPTP650Emulation | 1.3.6.1.4.1.17713.11.8.48 | DisplayString (SIZE (0..15)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..15)) · read-only · current The minimum long firmware version of 650-Emulation required to support this license key. | |||||||||||||
| Nmanagement | 1.3.6.1.4.1.17713.11.9 | ||||||||||||
| StargetRange | 1.3.6.1.4.1.17713.11.9.1 | INTEGER (0..2500) | RO | ||||||||||
scalar · INTEGER (0..2500) · read-only · current Initial target range used in installation +/-1, expressed in tenths of a kilometer. When Auto-Ranging this must be set to 0 | |||||||||||||
| SrangingMode | 1.3.6.1.4.1.17713.11.9.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Type of ranging to use during installation, either Auto-Ranging or use a selectable Target Range
| |||||||||||||
| SinstallStatusLinked | 1.3.6.1.4.1.17713.11.9.3 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current A non-zero value indicates that signalling was received with the wrong MAC address or a mismatched link name. NB: It is very unusual to detect this, because units with mis-configured Target MAC Address will normally fail to establish a wireless link. However, rare circumstances may establish a partial wireless link and detect this situation. NB: A non-zero value on start-up, or a change of value during operation, may generate an SNMP trap and/or SMTP email alert
| |||||||||||||
| SinstallArmState | 1.3.6.1.4.1.17713.11.9.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Indicates if the unit is being installed. NB: a change of state may generate an SNMP trap and/or SMTP email alert
| |||||||||||||
| StFTPServerPortNumber | 1.3.6.1.4.1.17713.11.9.6 | INTEGER (0..65535) | RW | ||||||||||
scalar · INTEGER (0..65535) · read-write · current The port number of the TFTP Server from which the TFTP Software Upgrade File Name will be retrieved | |||||||||||||
| StFTPSoftwareUpgradeFileName | 1.3.6.1.4.1.17713.11.9.7 | DisplayString (SIZE (0..127)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..127)) · read-write · current Filename of the Software Upgrade to be loaded from the TFTP Server | |||||||||||||
| StFTPStartSoftwareUpgrade | 1.3.6.1.4.1.17713.11.9.8 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current Write '1' to this attribute to start the TFTP software upgrade process. The attribute will be reset to 0 when the upgrade process has finished. Continuing with the software upgrade will cause spectrum management (DSO) channel metrics collection to stop. The wireless unit will no longer search for the optimal operational radio channel. The performance of this wireless link may deterioate over time. If operating in a regulatory band where RADAR detection is mandatory you must complete the software upgrade and reboot the unit. Channel metrics collection will only be restarted after the wireless unit has been rebooted | |||||||||||||
| StFTPSoftwareUpgradeStatus | 1.3.6.1.4.1.17713.11.9.9 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The current status of the TFTP Software upgrade process
| |||||||||||||
| StFTPSoftwareUpgradeStatusText | 1.3.6.1.4.1.17713.11.9.10 | DisplayString (SIZE (0..127)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..127)) · read-only · current Descriptive text describing the status of the TFTP Software upgrade process, including any error details | |||||||||||||
| StFTPSoftwareUpgradeStatusAdditionalText | 1.3.6.1.4.1.17713.11.9.11 | DisplayString (SIZE (0..127)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..127)) · read-only · current Any additional text describing the status of the TFTP Software upgrade process, including any error details | |||||||||||||
| ShTTPAccessEnabled | 1.3.6.1.4.1.17713.11.9.12 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This controls whether or not HTTP access is enabled, i.e. if this is disabled (0) then the unit will not respond to any requests on the HTTP port. Remote management via HTTPS is not affected by this setting. Any change in this setting will not take effect until the unit has been rebooted. (Factory default = Enabled)
| |||||||||||||
| StelnetAccessEnabled | 1.3.6.1.4.1.17713.11.9.13 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This controls whether or not Telnet access is enabled, i.e. if this is disabled (0) then the unit will not respond to any requests on the TELNET port. Any change in this setting will not take effect until the unit has been rebooted. (Factory default = Disabled)
| |||||||||||||
| ShTTPPortNumber | 1.3.6.1.4.1.17713.11.9.14 | INTEGER (0..65535) | RW | ||||||||||
scalar · INTEGER (0..65535) · read-write · current This controls the port number for HTTP access. A value of zero will use the default port number. Any change in this setting will not take effect until the unit has been rebooted. (Factory default = 80) | |||||||||||||
| ShTTPSPortNumber | 1.3.6.1.4.1.17713.11.9.15 | INTEGER (0..65535) | RW | ||||||||||
scalar · INTEGER (0..65535) · read-write · current This controls the port number for HTTPS access. A value of zero will use the default port number. Availability of HTTPS is controlled via the License Key. Any change in this setting will not take effect until the unit has been rebooted. (Factory default = 443) | |||||||||||||
| StelnetPortNumber | 1.3.6.1.4.1.17713.11.9.16 | INTEGER (0..65535) | RW | ||||||||||
scalar · INTEGER (0..65535) · read-write · current This controls the port number for TELNET access. A value of zero will use the default port number. Any change in this setting will not take effect until the unit has been rebooted. (Factory default = 23) | |||||||||||||
| ShTTPSAccessEnabled | 1.3.6.1.4.1.17713.11.9.17 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This controls whether or not HTTPS access is enabled, i.e. if this is disabled (0) then the unit will not respond to any requests on the HTTPS port. Remote management via HTTP is not affected by this setting. Any change in this setting will not take effect until the unit has been rebooted. (Factory default = Disabled)
| |||||||||||||
| StFTPServerInternetAddressType | 1.3.6.1.4.1.17713.11.9.18 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The type of Internet address specified by the associated tFTPServerInternetAddress.
| |||||||||||||
| StFTPServerInternetAddress | 1.3.6.1.4.1.17713.11.9.19 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current INET address of the TFTP Server from which the TFTP Software Upgrade File Name will be retrieved | |||||||||||||
| SlowestDataModulationMode | 1.3.6.1.4.1.17713.11.9.20 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The lowest modulation mode at which Ethernet Data traffic will be bridged over the wireless link
| |||||||||||||
| StFTPClient | 1.3.6.1.4.1.17713.11.9.22 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This controls whether or not TFTP client is enabled, i.e. if this is disabled (0) then the unit will not respond to any TFTP software download requests. (Factory default = Enabled)
| |||||||||||||
| SmgmtInstancedTableNumber | 1.3.6.1.4.1.17713.11.9.23 | INTEGER (1..8) | RO | ||||||||||
scalar · INTEGER (1..8) · read-only · current Number of entries in the mgmtInstancedTable. | |||||||||||||
| TmgmtInstancedTable | 1.3.6.1.4.1.17713.11.9.24 | NA | |||||||||||
table · not-accessible · current Instanced management table. | |||||||||||||
| RmgmtInstancedTableEntry | 1.3.6.1.4.1.17713.11.9.24.1 | NA | |||||||||||
| CmgmtInstancedTableIndex | 1.3.6.1.4.1.17713.11.9.24.1.1 | INTEGER (1..8) | NA | ||||||||||
column · INTEGER (1..8) · not-accessible · current Used to index values in the mgmtInstancedTable | |||||||||||||
| CinstallStatus | 1.3.6.1.4.1.17713.11.9.24.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current A non-zero value indicates that signalling was received with the wrong MAC address or a mismatched link name. NB: It is very unusual to detect this, because units with mis-configured Target MAC Address will normally fail to establish a wireless link. However, rare circumstances may establish a partial wireless link and detect this situation. NB: A non-zero value on start-up, or a change of value during operation, may generate an SNMP trap and/or SMTP email alert
| |||||||||||||
| StFTPServerResolvedInternetAddress | 1.3.6.1.4.1.17713.11.9.25 | DisplayString (SIZE (0..63)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..63)) · read-only · current IP Address of the TFTP Server. | |||||||||||||
| SinstallationMode | 1.3.6.1.4.1.17713.11.9.26 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Determines whether the unit is armed for antenna alignment, and whether it emits audible installation tones to indicate the state and strength of the received signal. Alternatively, configuration changes may be made without arming the unit (typically once a link has already been established). Note: while armed, a unit will have reduced link performance and functionality.
| |||||||||||||
| NphyControl | 1.3.6.1.4.1.17713.11.10 | ||||||||||||
| SlinkSymmetry | 1.3.6.1.4.1.17713.11.10.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Provides configuration options for sharing the available wireless capacity between the transmit and receive directions. Fixed link symmetry is defined by a ratio of the burst duration for the transmit direction to the burst duration for the receive direction. Permitted settings are 5:1, 3:1, 2:1, 1:1, 1:2, 1:3, 1:5. The 1:1 option provides fixed symmetric operation. The adaptive option selects transmit and receive burst durations automatically in response to the offered Ethernet traffic in each link direction. This attribute is valid only for a unit configured as a TDD Master
| |||||||||||||
| SuserConfiguredMaxModulationMode | 1.3.6.1.4.1.17713.11.10.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The maximum receive modulation mode controls the MAX mode used for adaptive modulation. NOTE: This attribute is automatically disabled when the installation agent is armed. To disarm the installation agent use the installation wizard
| |||||||||||||
| SlinkModeOptimization | 1.3.6.1.4.1.17713.11.10.3 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Optimizes the wireless link behavior for the type of traffic to be carried. In 'IP Traffic' mode, the wireless link will minimize transmission errors by automatically adapting the modulation mode. In 'TDM Traffic' mode, the wireless link will minimize transmission latency and preserve throughput by maintaining a higher modulation mode in the presence of a limited number of errors. The 'TDM Traffic' mode is recommended for E1/T1 applications and connectionless protocols.
| |||||||||||||
| StxColorCode | 1.3.6.1.4.1.17713.11.10.4 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Transmit Color Code. This attribute need only be considered when the unit is installed in a network of wireless units and where some of the units are operating on the same frequency. In this case, the value would normally be derived by a network planner. In all other cases, it is recommended that this attribute is left at the default value. NOTE: For the link to operate, the value of this parameter must in all cases match the value of the Rx Color Code parameter at the far end of the link.
| |||||||||||||
| SrxColorCode | 1.3.6.1.4.1.17713.11.10.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Receive Color Code. This attribute need only be considered when the unit is installed in a network of wireless units and where some of the units are operating on the same frequency. In this case, the value would normally be derived by a network planner. In all other cases, it is recommended that this attribute is left at the default value. NOTE: For the link to operate, the value of this parameter must in all cases match the value of the Tx Color Code parameter at the far end of the link.
| |||||||||||||
| SremoteMaximumTransmitPowerLinked | 1.3.6.1.4.1.17713.11.10.6 | INTEGER (-15..30) | RO | ||||||||||
scalar · INTEGER (-15..30) · read-only · current Maximum transmit power the remote wireless unit is permitted to use when establishing and maintaining the wireless link | |||||||||||||
| SphyControlInstancedTableNumber | 1.3.6.1.4.1.17713.11.10.7 | INTEGER (1..8) | RO | ||||||||||
scalar · INTEGER (1..8) · read-only · current Number of entries in the PhyControlInstancedTable. | |||||||||||||
| TphyControlInstancedTable | 1.3.6.1.4.1.17713.11.10.8 | NA | |||||||||||
| RphyControlInstancedTableEntry | 1.3.6.1.4.1.17713.11.10.8.1 | NA | |||||||||||
| CphyControlInstancedTableIndex | 1.3.6.1.4.1.17713.11.10.8.1.1 | INTEGER (1..8) | NA | ||||||||||
column · INTEGER (1..8) · not-accessible · current Used to index the PhyControlInstancedTable. | |||||||||||||
| CremoteMaximumTransmitPower | 1.3.6.1.4.1.17713.11.10.8.1.2 | INTEGER (-15..30) | RO | ||||||||||
column · INTEGER (-15..30) · read-only · current Maximum transmit power the remote wireless unit is permitted to use when establishing and maintaining the wireless link | |||||||||||||
| NphyStatus | 1.3.6.1.4.1.17713.11.12 | ||||||||||||
| SlinkLossLinked | 1.3.6.1.4.1.17713.11.12.1 | INTEGER (-500..500) | RO | ||||||||||
scalar · INTEGER (-500..500) · read-only · current The wireless link loss expressed in tenths of a dB | |||||||||||||
| SreceivePowerLinked | 1.3.6.1.4.1.17713.11.12.2 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Receive power expressed in tenths of a dBm | |||||||||||||
| SvectorErrorLinked | 1.3.6.1.4.1.17713.11.12.3 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The vector error measurement compares the received signal's IQ modulation characteristics to an ideal signal to determine the composite error vector magnitude. The value represented by this attribute is the average vector error over the previous second expressed in tenths of a dB | |||||||||||||
| StransmitPowerLinked | 1.3.6.1.4.1.17713.11.12.4 | Integer32 | RO | 230 | |||||||||
scalar · Integer32 · read-only · current Transmit power expressed in tenths of a dBm Example values from LibreNMS test devices
| |||||||||||||
| SreceiveChannel | 1.3.6.1.4.1.17713.11.12.5 | INTEGER (0..305) | RO | ||||||||||
scalar · INTEGER (0..305) · read-only · current Current active receive channel | |||||||||||||
| StransmitChannel | 1.3.6.1.4.1.17713.11.12.6 | INTEGER (0..305) | RO | ||||||||||
scalar · INTEGER (0..305) · read-only · current Current active transmit channel | |||||||||||||
| SreceiveFreqMHz | 1.3.6.1.4.1.17713.11.12.7 | INTEGER (0..6050) | RO | ||||||||||
scalar · INTEGER (0..6050) · read-only · current Current receive frequency expressed in integer MHz | |||||||||||||
| StransmitFreqMHz | 1.3.6.1.4.1.17713.11.12.8 | INTEGER (0..6050) | RO | ||||||||||
scalar · INTEGER (0..6050) · read-only · current Current transmit frequency expressed in integer MHz | |||||||||||||
| SsignalStrengthRatioLinked | 1.3.6.1.4.1.17713.11.12.9 | Integer32 | RO | -8 | |||||||||
scalar · Integer32 · read-only · current Signal strength ratio (Vertical / Horizontal) : the number of dB larger the Vertical antenna input is than the Horizontal antenna input expressed in tenths of a dB Example values from LibreNMS test devices
| |||||||||||||
| SreceiveFreqKHz | 1.3.6.1.4.1.17713.11.12.10 | INTEGER (0..6050000) | RO | ||||||||||
scalar · INTEGER (0..6050000) · read-only · current Current receive frequency expressed as KHz | |||||||||||||
| StransmitFreqKHz | 1.3.6.1.4.1.17713.11.12.11 | INTEGER (0..6050000) | RO | ||||||||||
scalar · INTEGER (0..6050000) · read-only · current Current transmit frequency expressed as KHz | |||||||||||||
| SrawReceivePowerLinked | 1.3.6.1.4.1.17713.11.12.12 | Integer32 | RO | -528 | |||||||||
scalar · Integer32 · read-only · current Raw receive power expressed in tenths of a dBm Example values from LibreNMS test devices
| |||||||||||||
| SrangeLinked | 1.3.6.1.4.1.17713.11.12.13 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Distance between the two peer wireless units expressed in tenths of a kilometer | |||||||||||||
| SreceiveModulationModeLinked | 1.3.6.1.4.1.17713.11.12.14 | INTEGER (0..28) | RO | 24 | |||||||||
scalar · INTEGER (0..28) · read-only · current Current active receive modulation mode Example values from LibreNMS test devices
| |||||||||||||
| StransmitModulationModeLinked | 1.3.6.1.4.1.17713.11.12.15 | INTEGER (0..28) | RO | 24 | |||||||||
scalar · INTEGER (0..28) · read-only · current Current active transmit modulation mode Example values from LibreNMS test devices
| |||||||||||||
| SsearchStateLinked | 1.3.6.1.4.1.17713.11.12.16 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Search status of the wireless modem. 'Registering' means that the modem has locked to an OFDM signal, and the wireless link is up. 'Searching' means that no wireless signal has been detected. 'Acquiring' means that a wireless signal has been detected, but the modem has not locked to an OFDM signal.
| |||||||||||||
| SremoteMACAddressLinked | 1.3.6.1.4.1.17713.11.12.17 | OCTET STRING (SIZE (6)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (6)) · read-only · current MAC Address of the peer wireless unit | |||||||||||||
| SphyInstancedStatusTableNumber | 1.3.6.1.4.1.17713.11.12.18 | INTEGER (1..8) | RO | ||||||||||
scalar · INTEGER (1..8) · read-only · current Number of entries in the phyInstancedStatusTable. | |||||||||||||
| TphyInstancedStatusTable | 1.3.6.1.4.1.17713.11.12.19 | NA | |||||||||||
table · not-accessible · current Instanced PHY status table. | |||||||||||||
| RphyInstancedStatusTableEntry | 1.3.6.1.4.1.17713.11.12.19.1 | NA | |||||||||||
| CphyInstancedStatusTableIndex | 1.3.6.1.4.1.17713.11.12.19.1.1 | INTEGER (1..8) | NA | ||||||||||
column · INTEGER (1..8) · not-accessible · current Used to index the phyInstancedStatusTable. | |||||||||||||
| ClinkLoss | 1.3.6.1.4.1.17713.11.12.19.1.2 | INTEGER (-500..500) | RO | ||||||||||
column · INTEGER (-500..500) · read-only · current The link loss measurement = Peer Tx_Power(dBm) - Local Rx_Power(dBm) + 2 x Antenna_Pattern(dBi) | |||||||||||||
| CreceivePower | 1.3.6.1.4.1.17713.11.12.19.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Receive power histogram | |||||||||||||
| CvectorError | 1.3.6.1.4.1.17713.11.12.19.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The vector error measurement compares the received signal's IQ modulation characteristics to an ideal signal to determine the composite error vector magnitude | |||||||||||||
| CsignalStrengthRatio | 1.3.6.1.4.1.17713.11.12.19.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Signal strength ratio (Vertical / Horizontal) : the number of dB larger the Vertical antenna input is than the Horizontal antenna input | |||||||||||||
| Crange | 1.3.6.1.4.1.17713.11.12.19.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Distance between the two peer wireless units | |||||||||||||
| CreceiveModulationMode | 1.3.6.1.4.1.17713.11.12.19.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current active receive modulation mode
| |||||||||||||
| CtransmitModulationMode | 1.3.6.1.4.1.17713.11.12.19.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current active transmit modulation mode
| |||||||||||||
| CsearchState | 1.3.6.1.4.1.17713.11.12.19.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Search status of the wireless modem. 'Registering' means that the modem has locked to an OFDM signal, and the wireless link is up. 'Searching' means that no wireless signal has been detected. 'Acquiring' means that a wireless signal has been detected, but the modem has not locked to an OFDM signal.
| |||||||||||||
| CremoteMACAddress | 1.3.6.1.4.1.17713.11.12.19.1.10 | OCTET STRING (SIZE (6)) | RO | ||||||||||
column · OCTET STRING (SIZE (6)) · read-only · current MAC Address of the peer wireless unit | |||||||||||||
| CrawReceivePower | 1.3.6.1.4.1.17713.11.12.19.1.11 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Raw receive power | |||||||||||||
| CtransmitPower | 1.3.6.1.4.1.17713.11.12.19.1.12 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Transmit power histogram | |||||||||||||
| StempPcb | 1.3.6.1.4.1.17713.11.12.20 | INTEGER (-100..200) | RO | ||||||||||
scalar · INTEGER (-100..200) · read-only · current PCB temperature expressed in Celsius | |||||||||||||
| Nalarms | 1.3.6.1.4.1.17713.11.13 | ||||||||||||
| SunitOutOfCalibration | 1.3.6.1.4.1.17713.11.13.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The unit is out of calibration
| |||||||||||||
| SincompatibleRegulatoryBandsLinked | 1.3.6.1.4.1.17713.11.13.4 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The master and slave units have incompatible regulatory bands. NB: Both units must have compatible license keys
| |||||||||||||
| SnoWirelessChannelAvailable | 1.3.6.1.4.1.17713.11.13.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Spectrum Management was unable to locate a suitable wireless channel to operate on
| |||||||||||||
| SwirelessLinkDisabledWarning | 1.3.6.1.4.1.17713.11.13.6 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The SNMP ifAdminStatus of the wireless interface has disabled wireless traffic
| |||||||||||||
| SmainPSUPortDisabledWarning | 1.3.6.1.4.1.17713.11.13.7 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The SNMP ifAdminStatus of the interface has disabled Ethernet traffic
| |||||||||||||
| SsFPError | 1.3.6.1.4.1.17713.11.13.8 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current If the SFP link is not OK, there are five possible causes: Either a SFP has been installed but the license key does not include SFP fiber support, a fiber link could not be established even though no LOS was detected (i.e. an optical carrier was detected, which could be due to a broken TX fiber, or because the link is disabled at the fiber link partner), a fiber link could not be established and LOS is detected (i.e. no optical carrier is detected), the installed SFP is not supported or the installed SFP failed to initialize correctly. NB: a change of status may generate an SNMP trap and/or SMTP email alert
| |||||||||||||
| SmainPSUPortConfigurationMismatch | 1.3.6.1.4.1.17713.11.13.9 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The detection of Ethernet fragments (runt packets) when the link is in full duplex is an indication of an auto-negotiation or forced configuration mismatch
| |||||||||||||
| SincompatibleMasterAndSlaveLinked | 1.3.6.1.4.1.17713.11.13.10 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current A non-zero value indicates that the master and slave ends of a link are different hardware products, or have different software versions, or have different TDD Frame Configuraton Modes (Standard/Expert) in HCMP topology. NB: It is very unusual to detect this, because incompatible units will normally fail to establish a wireless link. However, some combinations may establish a partial wireless link and detect this situation. NB: A non-zero value may generate an SNMP trap and/or SMTP email alert
| |||||||||||||
| StDDSynchronizationStatus | 1.3.6.1.4.1.17713.11.13.11 | INTEGER | RO | inactive(9) | |||||||||
scalar · INTEGER · read-only · current An alarm value (displayed in red) indicates that one of the following conditions has not been met (i) An external timing system is connected or internal timing has been configured. (ii) The timing system is providing a useable reference. (iii) The ODU is locked to this reference.
Example values from LibreNMS test devices
| |||||||||||||
| SauxPortDisabledWarning | 1.3.6.1.4.1.17713.11.13.12 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The SNMP ifAdminStatus of the interface has disabled Ethernet traffic
| |||||||||||||
| StDDSynchronizationAlarm | 1.3.6.1.4.1.17713.11.13.13 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Not Synchronized indicates failure of the external timing system for a period greater than the holdover timer. TDD frame timing will have drifted, and this link may cause interference with other links in a synchronized network. Timing System Failure is an early warning, indicating that 80% of the holdover period has expired.
| |||||||||||||
| SlinkModeOptimizationMismatchLinked | 1.3.6.1.4.1.17713.11.13.14 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The remote node of this link has been configured with a different link mode optimization
| |||||||||||||
| SauxPortConfigurationMismatch | 1.3.6.1.4.1.17713.11.13.15 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The detection of Ethernet fragments (runt packets) when the link is in full duplex is an indication of an auto-negotiation or forced configuration mismatch. This alarm is only raised if an Out-of-Band Management Mode has been configured.
| |||||||||||||
| SsecureModeAlarm | 1.3.6.1.4.1.17713.11.13.16 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The secure mode (e.g. FIPS, UC-APL) state of the unit. The secure mode is not configured(1) state indicates that the unit is capable of secure mode operation, and one or more of the following security materials has not been configured: Key Of Keys, Private Key, Public Certificate, DRNG Entropy Status, Wireless Encryption Key. The secure mode mode is configured but not active(2) state indicates that the unit is capable of secure mode operation, and the security material has been configured, but the configuration of interfaces is not consistent with secure mode operation. The secure mode is not supported(3) state indicates that the unit is not capable of secure mode operation. The secure mode capability requires appropriate hardware compatibility, license key and software image.
| |||||||||||||
| SdataBridgingStatusAlarmLinked | 1.3.6.1.4.1.17713.11.13.17 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Ethernet Data traffic bridging is disabled because the wireless link is not operating at the configured Lowest Data Modulation Mode
| |||||||||||||
| SsFPPortDisabledWarning | 1.3.6.1.4.1.17713.11.13.18 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The SNMP ifAdminStatus of the interface has disabled Ethernet traffic
| |||||||||||||
| SsFPPortConfigurationMismatch | 1.3.6.1.4.1.17713.11.13.19 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The detection of Ethernet fragments (runt packets) when the link is in full duplex is an indication of an auto-negotiation or forced configuration mismatch. This alarm is only raised if an Out-of-Band Management Mode has been configured.
| |||||||||||||
| SmaxLinkRangeExceededLinked | 1.3.6.1.4.1.17713.11.13.20 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The measured link range is greater than the maximum allowed by the license key. The link will operate at a reduced capacity while this condition applies. This alarm is only raised if the license specifies a maximum link range and the trial license is not active.
| |||||||||||||
| SnIDULanPortDisabledWarning | 1.3.6.1.4.1.17713.11.13.21 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The SNMP ifAdminStatus of the interface has disabled Ethernet traffic
| |||||||||||||
| SnIDULanPortConfigurationMismatch | 1.3.6.1.4.1.17713.11.13.22 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The detection of Ethernet fragments (runt packets) when the link is in full duplex is an indication of an auto-negotiation or forced configuration mismatch.
| |||||||||||||
| SportAllocationMismatchLinked | 1.3.6.1.4.1.17713.11.13.23 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The local and remote ODUs have different services configured.
| |||||||||||||
| StransparentClockSourcePortAlarm | 1.3.6.1.4.1.17713.11.13.25 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Transparent Clock will not function properly because SFP, the selected clock source port is not FIBER
| |||||||||||||
| SalarmInstancedTableNumber | 1.3.6.1.4.1.17713.11.13.26 | INTEGER (1..8) | RO | ||||||||||
scalar · INTEGER (1..8) · read-only · current Number of entries in the alarmInstancedTable. | |||||||||||||
| TalarmInstancedTable | 1.3.6.1.4.1.17713.11.13.27 | NA | |||||||||||
table · not-accessible · current Instanced alarm table. | |||||||||||||
| RalarmInstancedTableEntry | 1.3.6.1.4.1.17713.11.13.27.1 | NA | |||||||||||
| CalarmInstancedTableIndex | 1.3.6.1.4.1.17713.11.13.27.1.1 | INTEGER (1..8) | NA | ||||||||||
column · INTEGER (1..8) · not-accessible · current Used to index values in the alarmInstancedTable | |||||||||||||
| CincompatibleMasterAndSlave | 1.3.6.1.4.1.17713.11.13.27.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current A non-zero value indicates that the master and slave ends of a link are different hardware products, or have different software versions, or have different TDD Frame Configuraton Modes (Standard/Expert) in HCMP topology. NB: It is very unusual to detect this, because incompatible units will normally fail to establish a wireless link. However, some combinations may establish a partial wireless link and detect this situation. NB: A non-zero value may generate an SNMP trap and/or SMTP email alert
| |||||||||||||
| ClinkModeOptimizationMismatch | 1.3.6.1.4.1.17713.11.13.27.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The remote node of this link has been configured with a different link mode optimization
| |||||||||||||
| CdataBridgingStatusAlarm | 1.3.6.1.4.1.17713.11.13.27.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Ethernet Data traffic bridging is disabled because the wireless link is not operating at the configured Lowest Data Modulation Mode
| |||||||||||||
| CmaxLinkRangeExceeded | 1.3.6.1.4.1.17713.11.13.27.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The measured link range is greater than the maximum allowed by the license key. The link will operate at a reduced capacity while this condition applies. This alarm is only raised if the license specifies a maximum link range and the trial license is not active.
| |||||||||||||
| CportAllocationMismatch | 1.3.6.1.4.1.17713.11.13.27.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The local and remote ODUs have different services configured.
| |||||||||||||
| CwirelessLinkStatusAlarm | 1.3.6.1.4.1.17713.11.13.27.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current status of the wireless link. A state of Up on a green background indicates that a wireless link is established
| |||||||||||||
| CincompatibleRegulatoryBands | 1.3.6.1.4.1.17713.11.13.27.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The master and slave units have incompatible regulatory bands. NB: Both units must have compatible license keys
| |||||||||||||
| SsecureLicenseSignatureAlarm | 1.3.6.1.4.1.17713.11.13.28 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Alarm condition indicates that the unit's license is not secure enough for FIPS approved mode.
| |||||||||||||
| Napc | 1.3.6.1.4.1.17713.11.14 | ||||||||||||
| SatpcHcmpMasterTargetRxPower | 1.3.6.1.4.1.17713.11.14.1 | INTEGER (-80..-30) | RO | ||||||||||
scalar · INTEGER (-80..-30) · read-only · current The target Rx power level (dBm) at the HCMP Master that the HCMP Slaves try to reach by automatically adjusting their transmit power. The same value must be set in both the HCMP Master and Slaves as it used by the Slave to set its transmit power accurately before the wireless link is established. | |||||||||||||
| SatpcHcmpMasterTxPower | 1.3.6.1.4.1.17713.11.14.2 | INTEGER (-15..30) | RO | ||||||||||
scalar · INTEGER (-15..30) · read-only · current This must be set to the same value as the Maximum Transmit Power attribute on the HCMP Master. This is required by the HCMP Slave for initial transmit power estimation. | |||||||||||||
| Nsmtp | 1.3.6.1.4.1.17713.11.15 | ||||||||||||
| SsMTPEmailAlert | 1.3.6.1.4.1.17713.11.15.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Simple Mail Transfer Protocol is used to send equipment alerts via email to a specified email address
| |||||||||||||
| SsMTPServerPortNumber | 1.3.6.1.4.1.17713.11.15.3 | INTEGER (0..65535) | RW | ||||||||||
scalar · INTEGER (0..65535) · read-write · current Port number of the SMTP server | |||||||||||||
| SsMTPSourceEmailAddress | 1.3.6.1.4.1.17713.11.15.4 | DisplayString (SIZE (0..63)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..63)) · read-write · current The 'from' email address used when constructing the automatically generated e-mail message | |||||||||||||
| SsMTPDestinationEmailAddress | 1.3.6.1.4.1.17713.11.15.5 | DisplayString (SIZE (0..63)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..63)) · read-write · current The 'to' email address used when constructing the automatically generated e-mail message | |||||||||||||
| SsMTPEnabledMessages | 1.3.6.1.4.1.17713.11.15.6 | Bits | RW | ||||||||||
scalar · Bits · read-write · current This controls which SMTP messages the unit will send
| |||||||||||||
| SsMTPServerInternetAddressType | 1.3.6.1.4.1.17713.11.15.7 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The type of Internet address specified by the associated sMTPServerInternetAddress.
| |||||||||||||
| SsMTPServerInternetAddress | 1.3.6.1.4.1.17713.11.15.8 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current Internet address of the SMTP server | |||||||||||||
| SsMTPServerResolvedInternetAddress | 1.3.6.1.4.1.17713.11.15.9 | DisplayString (SIZE (0..63)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..63)) · read-only · current IP Address of the SMTP Server. | |||||||||||||
| NsnmpControl | 1.3.6.1.4.1.17713.11.16 | ||||||||||||
| SsNMPPortNumber | 1.3.6.1.4.1.17713.11.16.1 | INTEGER (0..65535) | RW | ||||||||||
scalar · INTEGER (0..65535) · read-write · current The IP port number used to access the SNMP MIB (i.e. Gets and Sets) (default = 161). NB: A system reboot is required to activate changes to this attribute | |||||||||||||
| SsNMPCommunityString | 1.3.6.1.4.1.17713.11.16.2 | DisplayString (SIZE (0..63)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..63)) · read-write · current The SNMP community string. NB: A system reboot is required to activate changes to this attribute | |||||||||||||
| SsNMPTrapTableNumber | 1.3.6.1.4.1.17713.11.16.3 | INTEGER (2) | RO | ||||||||||
scalar · INTEGER (2) · read-only · current Number of entries in the sNMPTrapTable. | |||||||||||||
| TsNMPTrapTable | 1.3.6.1.4.1.17713.11.16.4 | NA | |||||||||||
table · not-accessible · current SNMP trap configuration table. | |||||||||||||
| RsNMPTrapTableEntry | 1.3.6.1.4.1.17713.11.16.4.1 | NA | |||||||||||
| CsNMPTrapTableIndex | 1.3.6.1.4.1.17713.11.16.4.1.1 | INTEGER (1..2) | NA | ||||||||||
column · INTEGER (1..2) · not-accessible · current SNMP trap value, used to index the SNMPTrapTable. | |||||||||||||
| CsNMPTrapPortNumber | 1.3.6.1.4.1.17713.11.16.4.1.3 | INTEGER (0..65535) | RW | ||||||||||
column · INTEGER (0..65535) · read-write · current Destination port for SNMP Traps (default=162). NB: A system reboot is required to activate changes to this attribute. | |||||||||||||
| CsNMPTrapInternetAddressType | 1.3.6.1.4.1.17713.11.16.4.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The type of Internet address specified by the associated sNMPTrapInternetAddress.
| |||||||||||||
| CsNMPTrapInternetAddress | 1.3.6.1.4.1.17713.11.16.4.1.5 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current The Internet address to which all SNMP Traps are sent. | |||||||||||||
| CsNMPTrapReceiverEnabled | 1.3.6.1.4.1.17713.11.16.4.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current A value of 0 disables the sending of SNMP trap to corresponding receiver. A value of 1 enables the sending of SNMP trap to corresponding receiver.
| |||||||||||||
| CsNMPTrapResolvedInternetAddress | 1.3.6.1.4.1.17713.11.16.4.1.7 | DisplayString (SIZE (0..127)) | RO | ||||||||||
column · DisplayString (SIZE (0..127)) · read-only · current IP Address(es) of the SNMP Trap Server. | |||||||||||||
| SsNMPTrapVersion | 1.3.6.1.4.1.17713.11.16.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The SNMP protocol version to use for SNMP Traps. NB: A system reboot is required to activate changes to this attribute
| |||||||||||||
| SsNMPEnabledTraps | 1.3.6.1.4.1.17713.11.16.6 | Bits | RW | ||||||||||
scalar · Bits · read-write · current This controls which SNMP Traps the unit will send
| |||||||||||||
| SenabledDiagnosticAlarms | 1.3.6.1.4.1.17713.11.16.7 | Bits | RW | ||||||||||
scalar · Bits · read-write · current Controls which individual diagnostic alarms are enabled. The unit may be configured to generate SNMP traps and/or SMTP email alerts for these enabled alarms by selecting 'Enabled Diagnostic Alarms' on the 'SNMP Enabled Traps' and/or 'SMTP Enabled Messages' attributes
| |||||||||||||
| SsNMPSendAllTrapsAtStartup | 1.3.6.1.4.1.17713.11.16.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls whether cleared traps are reported at start-up as well as raised traps. Only enabled traps will be reported. NB: Traps corresponding to transient events (i.e. not associated with an alarm or status value) are only sent when required and not at start-up.
| |||||||||||||
| Nsntp | 1.3.6.1.4.1.17713.11.17 | ||||||||||||
| SsNTPState | 1.3.6.1.4.1.17713.11.17.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current SNTP control state
| |||||||||||||
| SsNTPPollInterval | 1.3.6.1.4.1.17713.11.17.4 | INTEGER (60..43200) | RW | ||||||||||
scalar · INTEGER (60..43200) · read-write · current The SNTP server polling interval | |||||||||||||
| SsNTPSync | 1.3.6.1.4.1.17713.11.17.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current If SNTP Sync fails then check the server settings in the Remote Management page, or disable SNTP
| |||||||||||||
| SsNTPLastSync | 1.3.6.1.4.1.17713.11.17.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Last SNTP sync time | |||||||||||||
| SsystemClock | 1.3.6.1.4.1.17713.11.17.7 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current System clock presented as local time | |||||||||||||
| StimeZone | 1.3.6.1.4.1.17713.11.17.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Time zone offsets from Greenwich Mean Time (GMT)
| |||||||||||||
| SdaylightSaving | 1.3.6.1.4.1.17713.11.17.9 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Daylight Saving Time
| |||||||||||||
| SsNTPPrimaryServer | 1.3.6.1.4.1.17713.11.17.10 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Specifies the primary SNTP server, determining the order in which the servers are tried.
| |||||||||||||
| SsNTPPrimaryServerDeadTime | 1.3.6.1.4.1.17713.11.17.11 | INTEGER (0..86400) | RW | ||||||||||
scalar · INTEGER (0..86400) · read-write · current Time (in seconds) to wait before retrying communications with an unresponsive primary SNTP server. Setting the value to 0 disables the timer. | |||||||||||||
| SsNTPServerRetries | 1.3.6.1.4.1.17713.11.17.12 | INTEGER (0..10) | RW | ||||||||||
scalar · INTEGER (0..10) · read-write · current Number of times the device will retry after an SNTP server fails to respond. | |||||||||||||
| SsNTPServerTimeout | 1.3.6.1.4.1.17713.11.17.13 | INTEGER (1..15) | RW | ||||||||||
scalar · INTEGER (1..15) · read-write · current Time (in seconds) the device will wait for a response from an SNTP server. | |||||||||||||
| SsNTPServerTableNumber | 1.3.6.1.4.1.17713.11.17.14 | INTEGER (2) | RO | ||||||||||
scalar · INTEGER (2) · read-only · current Number of entries in the SNTPServerTable. | |||||||||||||
| TsNTPServerTable | 1.3.6.1.4.1.17713.11.17.15 | NA | |||||||||||
| RsNTPServerTableEntry | 1.3.6.1.4.1.17713.11.17.15.1 | NA | |||||||||||
| CsNTPServerTableIndex | 1.3.6.1.4.1.17713.11.17.15.1.1 | INTEGER (1..2) | NA | ||||||||||
column · INTEGER (1..2) · not-accessible · current Index range for the SNTPServerTable. | |||||||||||||
| CsNTPServerPortNumber | 1.3.6.1.4.1.17713.11.17.15.1.3 | INTEGER (0..65535) | RW | ||||||||||
column · INTEGER (0..65535) · read-write · current The IP port number of the SNTP server. Defaults to port 123. | |||||||||||||
| CsNTPServerStatus | 1.3.6.1.4.1.17713.11.17.15.1.4 | DisplayString (SIZE (0..127)) | RO | ||||||||||
column · DisplayString (SIZE (0..127)) · read-only · current Status message reflecting the result of communications with the SNTP server when last polled | |||||||||||||
| CsNTPServerInternetAddressType | 1.3.6.1.4.1.17713.11.17.15.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The type of Internet address specified by the associated sNTPServerInternetAddress.
| |||||||||||||
| CsNTPServerInternetAddress | 1.3.6.1.4.1.17713.11.17.15.1.6 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current The Internet address of a valid SNTP server | |||||||||||||
| CsNTPServerResolvedInternetAddress | 1.3.6.1.4.1.17713.11.17.15.1.7 | DisplayString (SIZE (0..63)) | RO | ||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current IP Address of the SNTP Server. | |||||||||||||
| CsNTPServerAuthenticationProtocol | 1.3.6.1.4.1.17713.11.17.15.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Authentication protocol to be used for this SNTP server. Options are None (default) or MD5.
| |||||||||||||
| CsNTPServerKeyIdentifier | 1.3.6.1.4.1.17713.11.17.15.1.9 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current SNTP key identifier. Note: Key 0 is reserved for testing using the well-known key all zeroes. | |||||||||||||
| Nreset | 1.3.6.1.4.1.17713.11.18 | ||||||||||||
| SsystemReset | 1.3.6.1.4.1.17713.11.18.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting this attribute to '1' will cause a system reboot. NB: a system reboot will apply any pending new settings held in memory
| |||||||||||||
| Nversions | 1.3.6.1.4.1.17713.11.19 | ||||||||||||
| SsoftwareVersion | 1.3.6.1.4.1.17713.11.19.1 | DisplayString (SIZE (0..63)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..63)) · read-only · current Current software version | |||||||||||||
| ShardwareVersion | 1.3.6.1.4.1.17713.11.19.2 | DisplayString (SIZE (0..63)) | RO | B0P01.01-C-FPS | |||||||||
scalar · DisplayString (SIZE (0..63)) · read-only · current Hardware platform version Example values from LibreNMS test devices
| |||||||||||||
| SsecondarySoftwareVersion | 1.3.6.1.4.1.17713.11.19.3 | DisplayString (SIZE (0..63)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..63)) · read-only · current Secondary software version, used when the primary software image is invalid or erased | |||||||||||||
| SbootVersion | 1.3.6.1.4.1.17713.11.19.4 | DisplayString (SIZE (0..63)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..63)) · read-only · current Boot code software version | |||||||||||||
| NpubStats | 1.3.6.1.4.1.17713.11.20 | ||||||||||||
| SreceiveDataRateLinked | 1.3.6.1.4.1.17713.11.20.1 | Integer32 | RO | 161340 | |||||||||
scalar · Integer32 · read-only · current Average data rate over the last one second interval (kbps) Example values from LibreNMS test devices
| |||||||||||||
| StransmitDataRateLinked | 1.3.6.1.4.1.17713.11.20.2 | Integer32 | RO | 161340 | |||||||||
scalar · Integer32 · read-only · current Average data rate over the last one second interval (kbps) Example values from LibreNMS test devices
| |||||||||||||
| SaggregateDataRateLinked | 1.3.6.1.4.1.17713.11.20.3 | Integer32 | RO | 322680 | |||||||||
scalar · Integer32 · read-only · current Average data rate over the last one second interval (kbps) Example values from LibreNMS test devices
| |||||||||||||
| SwirelessLinkAvailabilityLinked | 1.3.6.1.4.1.17713.11.20.4 | INTEGER (0..1000000) | RO | ||||||||||
scalar · INTEGER (0..1000000) · read-only · current Link availability calculated since the last reset of the system counters, as a percentage multiplied by 10000 to give four decimal places of precision | |||||||||||||
| SwirelessLinkStatusLinked | 1.3.6.1.4.1.17713.11.20.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current status of the wireless link
| |||||||||||||
| SbyteErrorRatioLinked | 1.3.6.1.4.1.17713.11.20.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Reciprocal of the byte error ratio calculated since the last reset of the system counters | |||||||||||||
| SreceiveModulationModeDetailLinked | 1.3.6.1.4.1.17713.11.20.7 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The reason for the current receive modulation mode
| |||||||||||||
| SdataBridgingAvailabilityLinked | 1.3.6.1.4.1.17713.11.20.8 | INTEGER (0..1000000) | RO | ||||||||||
scalar · INTEGER (0..1000000) · read-only · current Link availability bridging Ethernet Data traffic calculated since the last reset of the system counters, as a percentage multiplied by 10000 to give four decimal places of precision | |||||||||||||
| SpubInstancedStatsTableNumber | 1.3.6.1.4.1.17713.11.20.9 | INTEGER (1..8) | RO | ||||||||||
scalar · INTEGER (1..8) · read-only · current Number of entries in the pubInstancedStatsTable. | |||||||||||||
| TpubInstancedStatsTable | 1.3.6.1.4.1.17713.11.20.10 | NA | |||||||||||
table · not-accessible · current Instanced Public stats table. | |||||||||||||
| RpubInstancedStatsTableEntry | 1.3.6.1.4.1.17713.11.20.10.1 | NA | |||||||||||
| CpubInstancedStatsTableIndex | 1.3.6.1.4.1.17713.11.20.10.1.1 | INTEGER (1..8) | NA | ||||||||||
column · INTEGER (1..8) · not-accessible · current Used to index the pubInstancedStatsTable. | |||||||||||||
| CreceiveDataRate | 1.3.6.1.4.1.17713.11.20.10.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Histogram of the average link receive data rate. | |||||||||||||
| CtransmitDataRate | 1.3.6.1.4.1.17713.11.20.10.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Histogram of the average link transmit data rate. | |||||||||||||
| CaggregateDataRate | 1.3.6.1.4.1.17713.11.20.10.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Histogram of the link aggregate data rate. | |||||||||||||
| CwirelessLinkAvailability | 1.3.6.1.4.1.17713.11.20.10.1.5 | INTEGER (0..1000000) | RO | ||||||||||
column · INTEGER (0..1000000) · read-only · current Link availability calculated since the last reset of the system counters | |||||||||||||
| CwirelessLinkStatus | 1.3.6.1.4.1.17713.11.20.10.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current status of the wireless link. A state of 'Up' on a green background indicates that a wireless link is established
| |||||||||||||
| CreceiveModulationModeDetail | 1.3.6.1.4.1.17713.11.20.10.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current A brief description of the reason for the current receive modulation mode
| |||||||||||||
| CdataBridgingAvailability | 1.3.6.1.4.1.17713.11.20.10.1.8 | INTEGER (0..1000000) | RO | ||||||||||
column · INTEGER (0..1000000) · read-only · current Link availability for bridging Ethernet Data traffic calculated since the last reset of the system counters | |||||||||||||
| CbyteErrorRatio | 1.3.6.1.4.1.17713.11.20.10.1.9 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Reciprocal of the byte error ratio calculated since the last reset of the system counters | |||||||||||||
| CwirelessOutEthernetOctets | 1.3.6.1.4.1.17713.11.20.10.1.10 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Cumulative total of octets transmitted in data or management service at the wireless interface. This excludes wireless MAC headers, MAC management messages, and Null bytes. | |||||||||||||
| CwirelessOutAllOctets | 1.3.6.1.4.1.17713.11.20.10.1.11 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Cumulative total of octets transmitted at the wireless interface. This includes data service, management service, wireless MAC headers, MAC management messages, and Null bytes. | |||||||||||||
| CwirelessOutOctets | 1.3.6.1.4.1.17713.11.20.10.1.12 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Cumulative total of octets including wireless MAC headers transmitted in data or management service at the wireless interface. This excludes MAC management messages and Null bytes. | |||||||||||||
| CerroredSeconds | 1.3.6.1.4.1.17713.11.20.10.1.13 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current erroredSeconds count for any second period containing one or more codeword errors since the last reset of the system counters. | |||||||||||||
| CseverelyErroredSeconds | 1.3.6.1.4.1.17713.11.20.10.1.14 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current severelyErroredSeconds count for any second period containing ten or more codeword errors since the last reset of the system counters. | |||||||||||||
| CunavailableSeconds | 1.3.6.1.4.1.17713.11.20.10.1.15 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current unavailableSeconds count for any second when Data Bridging Status = Disabled since the last reset of the system counters. Note erroredSeconds and severelyErroredSeconds are not incremented when the link is unavailable. | |||||||||||||
| Nencryption | 1.3.6.1.4.1.17713.11.22 | ||||||||||||
| SencryptionAlgorithm | 1.3.6.1.4.1.17713.11.22.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The Encryption Algorithm used by the wireless link. NB: A system reboot is required to activate changes to this attribute. NB: The same Encryption Algorithm must be configured at BOTH ends of the link for it to function correctly. TLS RSA Encryption Algorithm is not compatible with Link Name access method.
| |||||||||||||
| StLSMinimumSecurityLevel | 1.3.6.1.4.1.17713.11.22.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The minimum level of security that is supported on the device
| |||||||||||||
| NtDDControl | 1.3.6.1.4.1.17713.11.23 | ||||||||||||
| StDDSynchronizationMode | 1.3.6.1.4.1.17713.11.23.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current TDD Synchronization Mode selection
| |||||||||||||
| ShCMPMaximumLinkRange | 1.3.6.1.4.1.17713.11.23.2 | INTEGER (50..1000) | RO | ||||||||||
scalar · INTEGER (50..1000) · read-only · current The maximum link range between the HCMP Master and any HCMP Slave. The same value must be used on both the HCMP Master and its Slaves. | |||||||||||||
| SmaximumNumberOfSlaves | 1.3.6.1.4.1.17713.11.23.3 | INTEGER (1..8) | RO | ||||||||||
scalar · INTEGER (1..8) · read-only · current The maximum number of HCMP Slaves that an HCMP Master can simultaneously connect to. The same value has to be used in both the HCMP Master and its Slaves. | |||||||||||||
| ShCMPLinkSymmetry | 1.3.6.1.4.1.17713.11.23.4 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Provides configuration options for sharing the available wireless capacity among all Slaves between the transmit and receive directions. Option x to y is the ratio of Total Downlink capacity to Total Uplink Capacity. The same value has to be used in both the HCMP Master and its Slaves.
| |||||||||||||
| NsyslogControl | 1.3.6.1.4.1.17713.11.24 | ||||||||||||
| SsyslogClient | 1.3.6.1.4.1.17713.11.24.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Enable or disable the syslog client
| |||||||||||||
| SsyslogState | 1.3.6.1.4.1.17713.11.24.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The syslog service has been enabled or disabled
| |||||||||||||
| NaAAControl | 1.3.6.1.4.1.17713.11.25 | ||||||||||||
| SuserTableNumber | 1.3.6.1.4.1.17713.11.25.1 | INTEGER (1..10) | RO | ||||||||||
scalar · INTEGER (1..10) · read-only · current Number of entries in the userTable | |||||||||||||
| TuserTable | 1.3.6.1.4.1.17713.11.25.2 | NA | |||||||||||
table · not-accessible · current The User Table Control group contains objects specifically for user account management. | |||||||||||||
| RuserTableEntry | 1.3.6.1.4.1.17713.11.25.2.1 | NA | |||||||||||
| CuserTableIndex | 1.3.6.1.4.1.17713.11.25.2.1.1 | INTEGER (1..10) | NA | ||||||||||
column · INTEGER (1..10) · not-accessible · current used to index values in the userTable. | |||||||||||||
| CuserName | 1.3.6.1.4.1.17713.11.25.2.1.2 | DisplayString (SIZE (0..67)) | RO | ||||||||||
column · DisplayString (SIZE (0..67)) · read-only · current User name which must be entered, along with the appropriate password, in order to gain access to the system. | |||||||||||||
| CuserRole | 1.3.6.1.4.1.17713.11.25.2.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Role of the selected user. A Security Officer has access to and can modify all settings. A System Administrator has access to and can modify all non-security settings. A Read Only user can view settings, but cannot make any changes.
| |||||||||||||
| CuserEnabled | 1.3.6.1.4.1.17713.11.25.2.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Enable / Disable the selected user
| |||||||||||||
| CuserPassword | 1.3.6.1.4.1.17713.11.25.2.1.5 | DisplayString (SIZE (0..67)) | RW | ||||||||||
column · DisplayString (SIZE (0..67)) · read-write · current User password, which must be entered in order to gain access to the system. | |||||||||||||
| NrouterProtocols | 1.3.6.1.4.1.17713.11.26 | ||||||||||||
| SmicrowaveAdaptiveBandwidth | 1.3.6.1.4.1.17713.11.26.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Enable support of Microwave Adaptive Bandwidth Protocol. MAB is disabled if link symmetry is configured as Adaptive
| |||||||||||||
| SmABNominalModulationMode | 1.3.6.1.4.1.17713.11.26.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The Nominal modulation mode is the desired modulation mode. MAB VSM packets are generated when the current modulation mode falls below the nominal modulation.
| |||||||||||||
| SmABTransmissionInterval | 1.3.6.1.4.1.17713.11.26.3 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The minimum interval (in seconds) between successive MAB vendor specific messages (VSM). These VSM are sent when the current transmit capacity falls below the configured MAB Nominal Modulation Mode.
| |||||||||||||
| SmABHoldoffPeriod | 1.3.6.1.4.1.17713.11.26.4 | INTEGER (10..60) | RO | ||||||||||
scalar · INTEGER (10..60) · read-only · current The period (in seconds) over which transmit capacity is averaged over to determine when the wireless link has degraded | |||||||||||||
| SmABMaintenanceLevel | 1.3.6.1.4.1.17713.11.26.5 | INTEGER (0..7) | RO | ||||||||||
scalar · INTEGER (0..7) · read-only · current Maintenance Levels (0-7) determines the destination MAC address of MAB vendor specific messages. | |||||||||||||
| SuseVLANForMABProtocol | 1.3.6.1.4.1.17713.11.26.6 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This controls whether MAB vendor specific messages (VSM) packets use VLAN tags or not.
| |||||||||||||
| SmABProtocolVID | 1.3.6.1.4.1.17713.11.26.7 | INTEGER (0..4094) | RO | ||||||||||
scalar · INTEGER (0..4094) · read-only · current This VLAN VID (0-4094) will be included in MAB vendor specific messages (VSM) packets. | |||||||||||||
| SmABProtocolVLANPriority | 1.3.6.1.4.1.17713.11.26.8 | INTEGER (0..7) | RO | ||||||||||
scalar · INTEGER (0..7) · read-only · current This VLAN Priority (0-7) will be included in MAB vendor specific messages (VSM) packets. | |||||||||||||
| SmABState | 1.3.6.1.4.1.17713.11.26.9 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current state of MAB Protocol. A state of 'Normal' on a green background indicates that a wireless link is operating at nominal capacity
| |||||||||||||
| SmABNominalTransmitCapacity | 1.3.6.1.4.1.17713.11.26.10 | INTEGER (0..1000) | RO | ||||||||||
scalar · INTEGER (0..1000) · read-only · current The nominal Tx capacity used in MAB Vendor Specific Messages for the selected nominal modulation mode | |||||||||||||
| SmABCurrentTransmitCapacity | 1.3.6.1.4.1.17713.11.26.11 | INTEGER (0..1000) | RO | ||||||||||
scalar · INTEGER (0..1000) · read-only · current The current Tx capacity of the wireless link used in the last MAB Vendor Specific Message transmitted. | |||||||||||||
| NcableDiagnostics | 1.3.6.1.4.1.17713.11.27 | ||||||||||||
| ScableDiagnosticsPorts | 1.3.6.1.4.1.17713.11.27.1 | Bits | RW | ||||||||||
scalar · Bits · read-write · current Select ports on which Cable Diagnostics must be executed
| |||||||||||||
| ScableDiagnosticsControl | 1.3.6.1.4.1.17713.11.27.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set this attribute to 'Test in Progress' to start a Cable Diagnostics test
| |||||||||||||
| ScableDiagnosticsWarning | 1.3.6.1.4.1.17713.11.27.3 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Normal Ethernet operation is disrupted when a Cable Diagnostics test is in progress
| |||||||||||||
| ScableDiagnosticsResultTableNumber | 1.3.6.1.4.1.17713.11.27.4 | INTEGER (1..2) | RO | ||||||||||
scalar · INTEGER (1..2) · read-only · current Number of rows in the Cable Diagnostics Result Table. | |||||||||||||
| TcableDiagnosticsResultTable | 1.3.6.1.4.1.17713.11.27.5 | NA | |||||||||||
| RcableDiagnosticsResultTableEntry | 1.3.6.1.4.1.17713.11.27.5.1 | NA | |||||||||||
row · not-accessible · current Table CableDiagnosticsResultTable | |||||||||||||
| CcableDiagnosticsResultTableIndex | 1.3.6.1.4.1.17713.11.27.5.1.1 | INTEGER (1..2) | NA | ||||||||||
column · INTEGER (1..2) · not-accessible · current Cable Diagnostics Port value used to index into the result table. | |||||||||||||
| CcableDiagnosticsResultsDateTime | 1.3.6.1.4.1.17713.11.27.5.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The Date and Time when a Cable Diagnostics test was last executed | |||||||||||||
| CcableDiagPair1Results | 1.3.6.1.4.1.17713.11.27.5.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The result of the most recent execution of Cable Diagnostics on cable pair 1. According to the T658B wiring scheme, pair 1 is pins 4 & 5 on the RJ45 socket on the ODU. Open Circuit is reported when the impedance is greater than 330 ohms. Short Circuit is reported when the impedance is less than 33 ohms. Unknown is reported when a continuous signal is received from the link partner for 125 ms, preventing start of the test.
| |||||||||||||
| CcableDiagPair1Distance | 1.3.6.1.4.1.17713.11.27.5.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The distance in meters from the ODU to the fault detected on the cable pair during the most recent execution of Cable Diagnostics. Faults in cables longer than 160 meters (525 feet) may not be detected. The error margin is +/-2 meters (6.5 feet). | |||||||||||||
| CcableDiagPair2Results | 1.3.6.1.4.1.17713.11.27.5.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The result of the most recent execution of Cable Diagnostics on cable pair 2. According to the T658B wiring scheme, pair 2 is pins 1 & 2 on the RJ45 socket on the ODU. Open Circuit is reported when the impedance is greater than 330 ohms. Short Circuit is reported when the impedance is less than 33 ohms. Unknown is reported when a continuous signal is received from the link partner for 125 ms, preventing start of the test.
| |||||||||||||
| CcableDiagPair2Distance | 1.3.6.1.4.1.17713.11.27.5.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The distance in meters from the ODU to the fault detected on the cable pair during the most recent execution of Cable Diagnostics. Faults in cables longer than 160 meters (525 feet) may not be detected. The error margin is +/-2 meters (6.5 feet). | |||||||||||||
| CcableDiagPair3Results | 1.3.6.1.4.1.17713.11.27.5.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The result of the most recent execution of Cable Diagnostics on cable pair 3. According to the T658B wiring scheme, pair 3 is pins 3 & 6 on the RJ45 socket on the ODU. Open Circuit is reported when the impedance is greater than 330 ohms. Short Circuit is reported when the impedance is less than 33 ohms. Unknown is reported when a continuous signal is received from the link partner for 125 ms, preventing start of the test.
| |||||||||||||
| CcableDiagPair3Distance | 1.3.6.1.4.1.17713.11.27.5.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The distance in meters from the ODU to the fault detected on the cable pair during the most recent execution of Cable Diagnostics. Faults in cables longer than 160 meters (525 feet) may not be detected. The error margin is +/-2 meters (6.5 feet). | |||||||||||||
| CcableDiagPair4Results | 1.3.6.1.4.1.17713.11.27.5.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The result of the most recent execution of Cable Diagnostics on cable pair 4. According to the T658B wiring scheme, pair 4 is pins 7 & 8 on the RJ45 socket on the ODU. Open Circuit is reported when the impedance is greater than 330 ohms. Short Circuit is reported when the impedance is less than 33 ohms. Unknown is reported when a continuous signal is received from the link partner for 125 ms, preventing start of the test.
| |||||||||||||
| CcableDiagPair4Distance | 1.3.6.1.4.1.17713.11.27.5.1.10 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The distance in meters from the ODU to the fault detected on the cable pair during the most recent execution of Cable Diagnostics. Faults in cables longer than 160 meters (525 feet) may not be detected. The error margin is +/-2 meters (6.5 feet). | |||||||||||||
| NunitIdentification | 1.3.6.1.4.1.17713.11.28 | ||||||||||||
| SdeviceMACAddress | 1.3.6.1.4.1.17713.11.28.1 | OCTET STRING (SIZE (6)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (6)) · read-only · current Device MAC address | |||||||||||||
| SdeviceESN | 1.3.6.1.4.1.17713.11.28.2 | DisplayString (SIZE (0..63)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..63)) · read-only · current The ESN assigned to this device | |||||||||||||
| SdeviceMSN | 1.3.6.1.4.1.17713.11.28.3 | DisplayString (SIZE (0..63)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..63)) · read-only · current The MSN assigned to this device | |||||||||||||
| NauthorizationControl | 1.3.6.1.4.1.17713.11.29 | ||||||||||||
| SauthorizationControlTableNumber | 1.3.6.1.4.1.17713.11.29.1 | INTEGER (1..32) | RO | ||||||||||
scalar · INTEGER (1..32) · read-only · current Number of entries in the AuthorizationControlTable. | |||||||||||||
| TauthorizationControlTable | 1.3.6.1.4.1.17713.11.29.2 | NA | |||||||||||
table · not-accessible · current AuthorizationControlTable - used to validate an RM trying to connect to it. | |||||||||||||
| RauthorizationControlTableEntry | 1.3.6.1.4.1.17713.11.29.2.1 | NA | |||||||||||
| CauthorizationControlTableIndex | 1.3.6.1.4.1.17713.11.29.2.1.1 | INTEGER (1..32) | NA | ||||||||||
column · INTEGER (1..32) · not-accessible · current Authorization Control Table Index | |||||||||||||
| CwhitelistRMMacAddress | 1.3.6.1.4.1.17713.11.29.2.1.2 | OCTET STRING (SIZE (6)) | RW | ||||||||||
column · OCTET STRING (SIZE (6)) · read-write · current MAC Address of Remote Modules. | |||||||||||||
| CwhitelistRMEnabled | 1.3.6.1.4.1.17713.11.29.2.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Whether this Remote Module is enabled. Only Enabled Remote Modules are allowed to connect to this device.
| |||||||||||||
| CblacklistRMMacAddress | 1.3.6.1.4.1.17713.11.29.2.1.4 | OCTET STRING (SIZE (6)) | RW | ||||||||||
column · OCTET STRING (SIZE (6)) · read-write · current MAC Address of Remote Modules. | |||||||||||||
| CblacklistRMEnabled | 1.3.6.1.4.1.17713.11.29.2.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Whether this Remote Module is enabled. Only Enabled Remote Modules are black listed; they cannot connect to this ODU.
| |||||||||||||
| NdNS | 1.3.6.1.4.1.17713.11.30 | ||||||||||||
| SdNSResolver | 1.3.6.1.4.1.17713.11.30.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable DNS Resolver.
| |||||||||||||
| SdNSPrimaryServer | 1.3.6.1.4.1.17713.11.30.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Specifies the primary DNS server, determining the order in which the servers are tried.
| |||||||||||||
| SdNSServerTableNumber | 1.3.6.1.4.1.17713.11.30.3 | INTEGER (2) | RO | ||||||||||
scalar · INTEGER (2) · read-only · current Number of entries in the DNSServerTable. | |||||||||||||
| TdNSServerTable | 1.3.6.1.4.1.17713.11.30.4 | NA | |||||||||||
| RdNSServerTableEntry | 1.3.6.1.4.1.17713.11.30.4.1 | NA | |||||||||||
| CdNSServerTableIndex | 1.3.6.1.4.1.17713.11.30.4.1.1 | INTEGER (1..2) | NA | ||||||||||
column · INTEGER (1..2) · not-accessible · current Index range for the DNSServerTable. | |||||||||||||
| CdNSServerInternetAddressType | 1.3.6.1.4.1.17713.11.30.4.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The type of Internet address specified by the associated dNSServerInternetAddress.
| |||||||||||||
| CdNSServerInternetAddress | 1.3.6.1.4.1.17713.11.30.4.1.3 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current IP Address of the DNS Server which will be used to resolve hostname into IP Addresses . | |||||||||||||
| CdNSServerPortNumber | 1.3.6.1.4.1.17713.11.30.4.1.4 | INTEGER (2..65535) | RW | ||||||||||
column · INTEGER (2..65535) · read-write · current UDP Port Number of DNS Service on the Server. | |||||||||||||
| Nsupplementary | 1.3.6.1.4.1.17713.11.96 | ||||||||||||
| Slongitude | 1.3.6.1.4.1.17713.11.96.1 | DisplayString (SIZE (0..19)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..19)) · read-write · current The longitude of the unit, measured in decimal degrees. This object is set by the SNMP manager and has no internal function. | |||||||||||||
| Slatitude | 1.3.6.1.4.1.17713.11.96.2 | DisplayString (SIZE (0..19)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..19)) · read-write · current The latitude of the unit, measured in decimal degrees. This object is set by the SNMP manager and has no internal function. | |||||||||||||
| Saltitude | 1.3.6.1.4.1.17713.11.96.3 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current The altitude of the unit, measured in meters. This object is set by the SNMP manager and has no internal function. | |||||||||||||
| MptpCompliance | 1.3.6.1.4.1.17713.11.97 | ||||||||||||
compliance · current The compliance statement for the Cambium PTP MIB
| |||||||||||||
| NptpGroups | 1.3.6.1.4.1.17713.11.98 | ||||||||||||
| GdfsGroup | 1.3.6.1.4.1.17713.11.98.3 | ||||||||||||
group · current The dfs object group. | |||||||||||||
| GbridgeGroup | 1.3.6.1.4.1.17713.11.98.4 | ||||||||||||
group · current The bridge object group. | |||||||||||||
| GconfigurationGroup | 1.3.6.1.4.1.17713.11.98.5 | ||||||||||||
group · current The configuration object group.
| |||||||||||||
| GethernetGroup | 1.3.6.1.4.1.17713.11.98.6 | ||||||||||||
group · current The ethernet object group.
| |||||||||||||
| GtDMGroup | 1.3.6.1.4.1.17713.11.98.7 | ||||||||||||
group · current The tDM object group. | |||||||||||||
| GlicenseGroup | 1.3.6.1.4.1.17713.11.98.8 | ||||||||||||
group · current The license object group.
| |||||||||||||
| GmanagementGroup | 1.3.6.1.4.1.17713.11.98.9 | ||||||||||||
group · current The management object group.
| |||||||||||||
| GphyControlGroup | 1.3.6.1.4.1.17713.11.98.10 | ||||||||||||
group · current The phyControl object group. | |||||||||||||
| GphyStatusGroup | 1.3.6.1.4.1.17713.11.98.12 | ||||||||||||
group · current The phyStatus object group.
| |||||||||||||
| GalarmsGroup | 1.3.6.1.4.1.17713.11.98.13 | ||||||||||||
group · current The alarms object group.
| |||||||||||||
| GapcGroup | 1.3.6.1.4.1.17713.11.98.14 | ||||||||||||
| GsmtpGroup | 1.3.6.1.4.1.17713.11.98.15 | ||||||||||||
group · current The smtp object group. | |||||||||||||
| GsnmpControlGroup | 1.3.6.1.4.1.17713.11.98.16 | ||||||||||||
group · current The snmpControl object group. | |||||||||||||
| GsntpGroup | 1.3.6.1.4.1.17713.11.98.17 | ||||||||||||
group · current The sntp object group.
| |||||||||||||
| GresetGroup | 1.3.6.1.4.1.17713.11.98.18 | ||||||||||||
| GversionsGroup | 1.3.6.1.4.1.17713.11.98.19 | ||||||||||||
group · current The versions object group. | |||||||||||||
| GpubStatsGroup | 1.3.6.1.4.1.17713.11.98.20 | ||||||||||||
group · current The pubStats object group.
| |||||||||||||
| GencryptionGroup | 1.3.6.1.4.1.17713.11.98.22 | ||||||||||||
| GtDDControlGroup | 1.3.6.1.4.1.17713.11.98.23 | ||||||||||||
group · current The tDDControl object group. | |||||||||||||
| GsyslogControlGroup | 1.3.6.1.4.1.17713.11.98.24 | ||||||||||||
| GaAAControlGroup | 1.3.6.1.4.1.17713.11.98.25 | ||||||||||||
group · current The aAAControl object group.
| |||||||||||||
| GrouterProtocolsGroup | 1.3.6.1.4.1.17713.11.98.26 | ||||||||||||
group · current The routerProtocols object group. | |||||||||||||
| GcableDiagnosticsGroup | 1.3.6.1.4.1.17713.11.98.27 | ||||||||||||
group · current The cableDiagnostics object group.
| |||||||||||||
| GunitIdentificationGroup | 1.3.6.1.4.1.17713.11.98.28 | ||||||||||||
| GauthorizationControlGroup | 1.3.6.1.4.1.17713.11.98.29 | ||||||||||||
group · current The authorizationControl object group. | |||||||||||||
| GdNSGroup | 1.3.6.1.4.1.17713.11.98.30 | ||||||||||||
group · current The dNS object group. | |||||||||||||
| GsupplementaryGroup | 1.3.6.1.4.1.17713.11.98.96 | ||||||||||||
| GnotificationsGroup | 1.3.6.1.4.1.17713.11.98.99 | ||||||||||||
group · current The notifications group.
| |||||||||||||
| NptpTraps | 1.3.6.1.4.1.17713.11.99 | ||||||||||||
| NptpTrapPrefix | 1.3.6.1.4.1.17713.11.99.0 | ||||||||||||
| !channelChangeTrap | 1.3.6.1.4.1.17713.11.99.0.1 | ||||||||||||
notification · current The PTP radio has changed wireless channel.
This has been caused by either
i) mandatory radar avoidance,
a DFS impulsive interference event will also be
detected,
or
ii) Dynamic Spectrum Optimization, (DSO)
DSO improves link performance by selecting the
most appropriate transmit and receive channels
with the lowest level of interference.
| |||||||||||||
| !dfsImpulsiveInterferenceTrap | 1.3.6.1.4.1.17713.11.99.0.2 | ||||||||||||
| !mainPSUPortStatusTrap | 1.3.6.1.4.1.17713.11.99.0.3 | ||||||||||||
notification · current Current status of the Main PSU Ethernet link. NB: a change of state may generate an SNMP trap and/or SMTP email alert
| |||||||||||||
| !mainPSUPortDisabledWarningTrap | 1.3.6.1.4.1.17713.11.99.0.4 | ||||||||||||
notification · current The SNMP ifAdminStatus of the interface has disabled Ethernet traffic
| |||||||||||||
| !mainPSUPortConfigurationMismatchTrap | 1.3.6.1.4.1.17713.11.99.0.5 | ||||||||||||
notification · current The detection of Ethernet fragments (runt packets) when the link is in full duplex is an indication of an auto-negotiation or forced configuration mismatch | |||||||||||||
| !auxPortStatusTrap | 1.3.6.1.4.1.17713.11.99.0.6 | ||||||||||||
notification · current Current status of the Aux Ethernet link. NB: a change of state may generate an SNMP trap and/or SMTP email alert
| |||||||||||||
| !auxPortDisabledWarningTrap | 1.3.6.1.4.1.17713.11.99.0.7 | ||||||||||||
notification · current The SNMP ifAdminStatus of the interface has disabled Ethernet traffic
| |||||||||||||
| !regulatoryBandTrap | 1.3.6.1.4.1.17713.11.99.0.8 | ||||||||||||
notification · current The Regulatory Band prohibits the wireless unit from operating outside the regulated limits. An invalid Regulatory Band may be caused by a missing or incorrect License Key, a corrupt MAC Address or an attempt to configure a Regulatory Band not allowed by the License Key or an execution of Reset Configuration. NB: a change of state may generate an SNMP trap and/or SMTP email alert.
| |||||||||||||
| !installStatusTrap | 1.3.6.1.4.1.17713.11.99.0.9 | ||||||||||||
notification · current A non-zero value indicates that signalling was received with the wrong MAC address or a mismatched link name. NB: It is very unusual to detect this, because units with mis-configured Target MAC Address will normally fail to establish a wireless link. However, rare circumstances may establish a partial wireless link and detect this situation. NB: A non-zero value on start-up, or a change of value during operation, may generate an SNMP trap and/or SMTP email alert
| |||||||||||||
| !installArmStateTrap | 1.3.6.1.4.1.17713.11.99.0.10 | ||||||||||||
notification · current Indicates if the unit is being installed. NB: a change of state may generate an SNMP trap and/or SMTP email alert
| |||||||||||||
| !unitOutOfCalibrationTrap | 1.3.6.1.4.1.17713.11.99.0.11 | ||||||||||||
| !auxPortPowerOverEthernetOutputStatusTrap | 1.3.6.1.4.1.17713.11.99.0.12 | ||||||||||||
notification · current Current status of the Power Over Ethernet (PoE) output of the Aux port | |||||||||||||
| !incompatibleRegulatoryBandsTrap | 1.3.6.1.4.1.17713.11.99.0.14 | ||||||||||||
notification · current The master and slave units have incompatible regulatory bands. NB: Both units must have compatible license keys | |||||||||||||
| !noWirelessChannelAvailableTrap | 1.3.6.1.4.1.17713.11.99.0.15 | ||||||||||||
notification · current Spectrum Management was unable to locate a suitable wireless channel to operate on
| |||||||||||||
| !wirelessLinkDisabledWarningTrap | 1.3.6.1.4.1.17713.11.99.0.16 | ||||||||||||
notification · current The SNMP ifAdminStatus of the wireless interface has disabled wireless traffic
| |||||||||||||
| !auxPortConfigurationMismatchTrap | 1.3.6.1.4.1.17713.11.99.0.17 | ||||||||||||
notification · current The detection of Ethernet fragments (runt packets) when the link is in full duplex is an indication of an auto-negotiation or forced configuration mismatch. This alarm is only raised if an Out-of-Band Management Mode has been configured.
| |||||||||||||
| !sFPErrorTrap | 1.3.6.1.4.1.17713.11.99.0.18 | ||||||||||||
notification · current If the SFP link is not OK, there are five possible causes: Either a SFP has been installed but the license key does not include SFP fiber support, a fiber link could not be established even though no LOS was detected (i.e. an optical carrier was detected, which could be due to a broken TX fiber, or because the link is disabled at the fiber link partner), a fiber link could not be established and LOS is detected (i.e. no optical carrier is detected), the installed SFP is not supported or the installed SFP failed to initialize correctly. NB: a change of status may generate an SNMP trap and/or SMTP email alert
| |||||||||||||
| !sFPPortStatusTrap | 1.3.6.1.4.1.17713.11.99.0.19 | ||||||||||||
notification · current Current status of the SFP Ethernet link. NB: a change of state may generate an SNMP trap and/or SMTP email alert
| |||||||||||||
| !incompatibleMasterAndSlaveTrap | 1.3.6.1.4.1.17713.11.99.0.20 | ||||||||||||
notification · current A non-zero value indicates that the master and slave ends of a link are different hardware products, or have different software versions, or have different TDD Frame Configuraton Modes (Standard/Expert) in HCMP topology. NB: It is very unusual to detect this, because incompatible units will normally fail to establish a wireless link. However, some combinations may establish a partial wireless link and detect this situation. NB: A non-zero value may generate an SNMP trap and/or SMTP email alert | |||||||||||||
| !sNTPSyncTrap | 1.3.6.1.4.1.17713.11.99.0.21 | ||||||||||||
notification · current If SNTP Sync fails then check the server settings in the Remote Management page, or disable SNTP
| |||||||||||||
| !tDDSynchronizationAlarmTrap | 1.3.6.1.4.1.17713.11.99.0.22 | ||||||||||||
notification · current Not Synchronized indicates failure of the external timing system for a period greater than the holdover timer. TDD frame timing will have drifted, and this link may cause interference with other links in a synchronized network. Timing System Failure is an early warning, indicating that 80% of the holdover period has expired.
| |||||||||||||
| !sFPPortDisabledWarningTrap | 1.3.6.1.4.1.17713.11.99.0.23 | ||||||||||||
notification · current The SNMP ifAdminStatus of the interface has disabled Ethernet traffic
| |||||||||||||
| !sFPPortConfigurationMismatchTrap | 1.3.6.1.4.1.17713.11.99.0.24 | ||||||||||||
notification · current The detection of Ethernet fragments (runt packets) when the link is in full duplex is an indication of an auto-negotiation or forced configuration mismatch. This alarm is only raised if an Out-of-Band Management Mode has been configured.
| |||||||||||||
| !linkModeOptimizationMismatchTrap | 1.3.6.1.4.1.17713.11.99.0.25 | ||||||||||||
notification · current The remote node of this link has been configured with a different link mode optimization | |||||||||||||
| !tDMInterfaceStatusTrap | 1.3.6.1.4.1.17713.11.99.0.26 | ||||||||||||
notification · current @Current status of the connection to the TDM Box. A state of 'Up' on a green background indicates that the TDM Box is connected OK. When connecting a TDM Box only the Main Ethernet port should be used
| |||||||||||||
| !tDMChannelStatusTrap | 1.3.6.1.4.1.17713.11.99.0.27 | ||||||||||||
notification · current Current status of the TDM channels. A value of 0 indicates that a TDM channel is established
| |||||||||||||
| !tDMChannelLoopbackTrap | 1.3.6.1.4.1.17713.11.99.0.28 | ||||||||||||
notification · current The loopback status of TDM channels. This is intended for installation testing and should be set to 'None' for normal operation. The wire connections to a unit can be tested by applying a 'Copper' loopback to the local unit. The wireless connection to the remote unit can be tested by applying a 'Wireless' loopback to the remote unit with no loopback on the local unit. NB: a change of state may generate an SNMP trap and/or SMTP email alert
| |||||||||||||
| !nIDULanPortStatusTrap | 1.3.6.1.4.1.17713.11.99.0.29 | ||||||||||||
notification · current Current status of the NIDU LAN Ethernet link. NB: a change of state may generate an SNMP trap and/or SMTP email alert
| |||||||||||||
| !syslogStateTrap | 1.3.6.1.4.1.17713.11.99.0.30 | ||||||||||||
| !syslogLocalNearlyFullTrap | 1.3.6.1.4.1.17713.11.99.0.31 | ||||||||||||
notification · current The syslog local log is nearly full (90%) | |||||||||||||
| !syslogLocalWrappedTrap | 1.3.6.1.4.1.17713.11.99.0.32 | ||||||||||||
notification · current The syslog local log has wrapped | |||||||||||||
| !syslogClientTrap | 1.3.6.1.4.1.17713.11.99.0.33 | ||||||||||||
| !secureModeAlarmTrap | 1.3.6.1.4.1.17713.11.99.0.34 | ||||||||||||
notification · current The secure mode (e.g. FIPS, UC-APL) state of the unit. The secure mode is not configured(1) state indicates that the unit is capable of secure mode operation, and one or more of the following security materials has not been configured: Key Of Keys, Private Key, Public Certificate, DRNG Entropy Status, Wireless Encryption Key. The secure mode mode is configured but not active(2) state indicates that the unit is capable of secure mode operation, and the security material has been configured, but the configuration of interfaces is not consistent with secure mode operation. The secure mode is not supported(3) state indicates that the unit is not capable of secure mode operation. The secure mode capability requires appropriate hardware compatibility, license key and software image.
| |||||||||||||
| !dataBridgingStatusAlarmTrap | 1.3.6.1.4.1.17713.11.99.0.35 | ||||||||||||
notification · current Ethernet Data traffic bridging is disabled because the wireless link is not operating at the configured Lowest Data Modulation Mode | |||||||||||||
| !licenseRemainingTrialPeriodAlarmTrap | 1.3.6.1.4.1.17713.11.99.0.36 | ||||||||||||
notification · current If the full capability trial license period is about to expire then purchase a license upgrade from your reseller. | |||||||||||||
| !capacityVariantMismatchTrap | 1.3.6.1.4.1.17713.11.99.0.37 | ||||||||||||
notification · current The remote node of this link has a lower link capacity. Operating with a reduced effective link capacity.
| |||||||||||||
| !maxLinkRangeExceededTrap | 1.3.6.1.4.1.17713.11.99.0.38 | ||||||||||||
notification · current The measured link range is greater than the maximum allowed by the license key. The link will operate at a reduced capacity while this condition applies. This alarm is only raised if the license specifies a maximum link range and the trial license is not active.
| |||||||||||||
| !tDMConfigurationMismatchTrap | 1.3.6.1.4.1.17713.11.99.0.39 | ||||||||||||
notification · current Current status of the configuration of the TDM Box. A state of 'Ok' on a green background indicates that the TDM Box configuration is matched OK with the remote end.
| |||||||||||||
| !nIDULanPortDisabledWarningTrap | 1.3.6.1.4.1.17713.11.99.0.40 | ||||||||||||
notification · current The SNMP ifAdminStatus of the interface has disabled Ethernet traffic
| |||||||||||||
| !nIDULanPortConfigurationMismatchTrap | 1.3.6.1.4.1.17713.11.99.0.41 | ||||||||||||
notification · current The detection of Ethernet fragments (runt packets) when the link is in full duplex is an indication of an auto-negotiation or forced configuration mismatch. | |||||||||||||
| !portAllocationMismatchTrap | 1.3.6.1.4.1.17713.11.99.0.44 | ||||||||||||
notification · current The local and remote ODUs have different services configured. | |||||||||||||
| !wirelessLinkStatusAlarmTrap | 1.3.6.1.4.1.17713.11.99.0.45 | ||||||||||||
notification · current Current status of the wireless link. A state of Up on a green background indicates that a wireless link is established | |||||||||||||
| !lbtDetectedTrap | 1.3.6.1.4.1.17713.11.99.0.46 | ||||||||||||
| !secureLicenseSignatureAlarmTrap | 1.3.6.1.4.1.17713.11.99.0.47 | ||||||||||||
notification · current Alarm condition indicates that the unit's license is not secure enough for FIPS approved mode.
| |||||||||||||
Traps / Notifications
- auxPortConfigurationMismatchTrap
1.3.6.1.4.1.17713.11.99.0.17 - auxPortDisabledWarningTrap
1.3.6.1.4.1.17713.11.99.0.7 - auxPortPowerOverEthernetOutputStatusTrap
1.3.6.1.4.1.17713.11.99.0.12 - auxPortStatusTrap
1.3.6.1.4.1.17713.11.99.0.6 - capacityVariantMismatchTrap
1.3.6.1.4.1.17713.11.99.0.37 - channelChangeTrap
1.3.6.1.4.1.17713.11.99.0.1 - dataBridgingStatusAlarmTrap
1.3.6.1.4.1.17713.11.99.0.35 - dfsImpulsiveInterferenceTrap
1.3.6.1.4.1.17713.11.99.0.2 - incompatibleMasterAndSlaveTrap
1.3.6.1.4.1.17713.11.99.0.20 - incompatibleRegulatoryBandsTrap
1.3.6.1.4.1.17713.11.99.0.14 - installArmStateTrap
1.3.6.1.4.1.17713.11.99.0.10 - installStatusTrap
1.3.6.1.4.1.17713.11.99.0.9 - lbtDetectedTrap
1.3.6.1.4.1.17713.11.99.0.46 - licenseRemainingTrialPeriodAlarmTrap
1.3.6.1.4.1.17713.11.99.0.36 - linkModeOptimizationMismatchTrap
1.3.6.1.4.1.17713.11.99.0.25 - mainPSUPortConfigurationMismatchTrap
1.3.6.1.4.1.17713.11.99.0.5 - mainPSUPortDisabledWarningTrap
1.3.6.1.4.1.17713.11.99.0.4 - mainPSUPortStatusTrap
1.3.6.1.4.1.17713.11.99.0.3 - maxLinkRangeExceededTrap
1.3.6.1.4.1.17713.11.99.0.38 - nIDULanPortConfigurationMismatchTrap
1.3.6.1.4.1.17713.11.99.0.41 - nIDULanPortDisabledWarningTrap
1.3.6.1.4.1.17713.11.99.0.40 - nIDULanPortStatusTrap
1.3.6.1.4.1.17713.11.99.0.29 - noWirelessChannelAvailableTrap
1.3.6.1.4.1.17713.11.99.0.15 - portAllocationMismatchTrap
1.3.6.1.4.1.17713.11.99.0.44 - regulatoryBandTrap
1.3.6.1.4.1.17713.11.99.0.8 - sFPErrorTrap
1.3.6.1.4.1.17713.11.99.0.18 - sFPPortConfigurationMismatchTrap
1.3.6.1.4.1.17713.11.99.0.24 - sFPPortDisabledWarningTrap
1.3.6.1.4.1.17713.11.99.0.23 - sFPPortStatusTrap
1.3.6.1.4.1.17713.11.99.0.19 - sNTPSyncTrap
1.3.6.1.4.1.17713.11.99.0.21 - secureLicenseSignatureAlarmTrap
1.3.6.1.4.1.17713.11.99.0.47 - secureModeAlarmTrap
1.3.6.1.4.1.17713.11.99.0.34 - syslogClientTrap
1.3.6.1.4.1.17713.11.99.0.33 - syslogLocalNearlyFullTrap
1.3.6.1.4.1.17713.11.99.0.31 - syslogLocalWrappedTrap
1.3.6.1.4.1.17713.11.99.0.32 - syslogStateTrap
1.3.6.1.4.1.17713.11.99.0.30 - tDDSynchronizationAlarmTrap
1.3.6.1.4.1.17713.11.99.0.22 - tDMChannelLoopbackTrap
1.3.6.1.4.1.17713.11.99.0.28 - tDMChannelStatusTrap
1.3.6.1.4.1.17713.11.99.0.27 - tDMConfigurationMismatchTrap
1.3.6.1.4.1.17713.11.99.0.39 - tDMInterfaceStatusTrap
1.3.6.1.4.1.17713.11.99.0.26 - unitOutOfCalibrationTrap
1.3.6.1.4.1.17713.11.99.0.11 - wirelessLinkDisabledWarningTrap
1.3.6.1.4.1.17713.11.99.0.16 - wirelessLinkStatusAlarmTrap
1.3.6.1.4.1.17713.11.99.0.45
Groups and compliance
- aAAControlGroup
- alarmsGroup
- apcGroup
- authorizationControlGroup
- bridgeGroup
- cableDiagnosticsGroup
- configurationGroup
- dNSGroup
- dfsGroup
- encryptionGroup
- ethernetGroup
- licenseGroup
- managementGroup
- notificationsGroup
- phyControlGroup
- phyStatusGroup
- ptpCompliance
- pubStatsGroup
- resetGroup
- routerProtocolsGroup
- smtpGroup
- snmpControlGroup
- sntpGroup
- supplementaryGroup
- syslogControlGroup
- tDDControlGroup
- tDMGroup
- unitIdentificationGroup
- versionsGroup