CAMBIUM-PTP250-MIB
Cambium Networks Limited (formerly 'PipingHot Networks Limited')MIB for PTP250
snmptranslate -m CAMBIUM-PTP250-MIB -Tpsnmpwalk -v2c -c <community> -m CAMBIUM-PTP250-MIB <host> 1.3.6.1.4.1.17713Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Icambium | 1.3.6.1.4.1.17713 | |||
identity MIB for PTP250 | ||||
| Nptp | 1.3.6.1.4.1.17713.1 | |||
| Nptmp | 1.3.6.1.4.1.17713.2 | |||
| Nptp250 | 1.3.6.1.4.1.17713.250 | |||
| Nconfiguration | 1.3.6.1.4.1.17713.250.1 | |||
| SiPAddress | 1.3.6.1.4.1.17713.250.1.1 | IpAddress | RO | |
scalar · IpAddress · read-only · current Internet protocol (IP) address. This address is used by the family of Internet protocols to uniquely identify the unit on a network. | ||||
| SsubnetMask | 1.3.6.1.4.1.17713.250.1.2 | IpAddress | RO | |
scalar · IpAddress · read-only · current A subnet allows the flow of network traffic between hosts to be segregated based on a network configuration. By organizing hosts into logical groups, subnetting can improve network security and performance. | ||||
| SgatewayIPAddress | 1.3.6.1.4.1.17713.250.1.3 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of a computer on the current network that is currently acting as a network gateway. A gateway acts as an entrance / exit to packets from / to other networks. | ||||
| SremoteMACAddress | 1.3.6.1.4.1.17713.250.1.4 | OCTET STRING (SIZE (6)) | RO | |
scalar · OCTET STRING (SIZE (6)) · read-only · current MAC address of the PTP wireless unit forming the other end of the PTP link | ||||
| SmasterSlaveMode | 1.3.6.1.4.1.17713.250.1.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current The PTP wireless link operates using a master and slave relationship
| ||||
| SmaximumTransmitPower | 1.3.6.1.4.1.17713.250.1.6 | Integer32 (-15..27) | RO | |
scalar · Integer32 (-15..27) · read-only · current Maximum transmit power the wireless unit is permitted to use when establishing and maintaining the wireless link | ||||
| SantennaGain | 1.3.6.1.4.1.17713.250.1.7 | Integer32 (0..610) | RO | |
scalar · Integer32 (0..610) · read-only · current Antenna Gain. Expressed in 10ths of dBi. NB: This attribute is ignored for variants with an integral antenna. | ||||
| ScableLoss | 1.3.6.1.4.1.17713.250.1.8 | Integer32 (0..255) | RO | |
scalar · Integer32 (0..255) · read-only · current Loss in the cable between the ODU and the antenna. Expressed in 10ths of dB. NB: This attribute is ignored for variants with an integral antenna. | ||||
| SchannelBandwidth | 1.3.6.1.4.1.17713.250.1.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current The selected bandwidth of the transmit and receive radio channels
| ||||
| SremoteIPAddress | 1.3.6.1.4.1.17713.250.1.10 | IpAddress | RO | |
scalar · IpAddress · read-only · current IP Address of the peer wireless unit | ||||
| SlinkName | 1.3.6.1.4.1.17713.250.1.11 | DisplayString (SIZE (0..63)) | RO | |
scalar · DisplayString (SIZE (0..63)) · read-only · current Name of the PTP link allocated by the System Administrator. Used to establish a connection with the correct PTP wireless unit at the other end of the link. NOTE: The link name MUST be the same at both ends of the PTP link. | ||||
| SsiteName | 1.3.6.1.4.1.17713.250.1.12 | DisplayString (SIZE (0..63)) | RO | |
scalar · DisplayString (SIZE (0..63)) · read-only · current This field contains a user-provided description of the site name together with any additional notes | ||||
| SconfiguredModulationMode | 1.3.6.1.4.1.17713.250.1.13 | INTEGER | RO | |
scalar · INTEGER · read-only · current The fixed modulation mode or maximum adaptive modulation mode to be used by the wireless link
| ||||
| Sband | 1.3.6.1.4.1.17713.250.1.14 | INTEGER | RO | |
scalar · INTEGER · read-only · current The frequency band to be used by the wireless link
| ||||
| SconfiguredRange | 1.3.6.1.4.1.17713.250.1.15 | Integer32 (0..5400) | RO | |
scalar · Integer32 (0..5400) · read-only · current Configured distance between the two peer wireless units expressed in hundredths of a kilometer. | ||||
| SchannelSelection | 1.3.6.1.4.1.17713.250.1.16 | Bits | RO | |
scalar · Bits · read-only · current The channels selected for use by the user. The current channel will be selected from this list.
| ||||
| SvlanTagging | 1.3.6.1.4.1.17713.250.1.17 | INTEGER | RO | |
scalar · INTEGER · read-only · current Whether or not to use VLAN tagging for management.
| ||||
| SvlanId | 1.3.6.1.4.1.17713.250.1.18 | Integer32 (0..4094) | RO | |
scalar · Integer32 (0..4094) · read-only · current VLAN ID for management. | ||||
| SvlanPriority | 1.3.6.1.4.1.17713.250.1.19 | Integer32 (0..7) | RO | |
scalar · Integer32 (0..7) · read-only · current VLAN priority for management. | ||||
| SfixedModMode | 1.3.6.1.4.1.17713.250.1.22 | INTEGER | RO | |
scalar · INTEGER · read-only · current If disabled, allows automatic modulation mode selection.
| ||||
| SdualPayload | 1.3.6.1.4.1.17713.250.1.23 | INTEGER | RO | |
scalar · INTEGER · read-only · current If enabled, allows dual payload modulation modes to be selected.
| ||||
| Nethernet | 1.3.6.1.4.1.17713.250.2 | |||
| SdataPortAutoNegotiation | 1.3.6.1.4.1.17713.250.2.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current This controls whether the local Ethernet interface configuration is automatically negotiated or forced.
| ||||
| SdataPortAutoNegAdvertisement | 1.3.6.1.4.1.17713.250.2.2 | Bits | RO | |
scalar · Bits · read-only · current This sets the different Ethernet configurations that will be advertised during auto negotiation.
| ||||
| SdataPortStatus | 1.3.6.1.4.1.17713.250.2.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current status of the Ethernet link. NB: a change of state may generate an SNMP trap and/or SMTP email alert
| ||||
| SdataPortSpeedAndDuplex | 1.3.6.1.4.1.17713.250.2.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current speed and duplex of the Ethernet link
| ||||
| Nlicence | 1.3.6.1.4.1.17713.250.3 | |||
| SregionCode | 1.3.6.1.4.1.17713.250.3.1 | DisplayString (SIZE (0..63)) | RO | |
scalar · DisplayString (SIZE (0..63)) · read-only · current The region code prohibits the wireless unit from operating outside the regulated limits. NB: a change of state may generate an SNMP trap and/or SMTP email alert | ||||
| SproductVariant | 1.3.6.1.4.1.17713.250.3.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The product variant
| ||||
| SproductName | 1.3.6.1.4.1.17713.250.3.3 | DisplayString (SIZE (0..63)) | RO | |
scalar · DisplayString (SIZE (0..63)) · read-only · current Name of the product variant | ||||
| Nmanagement | 1.3.6.1.4.1.17713.250.4 | |||
| SinstallArmState | 1.3.6.1.4.1.17713.250.4.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Indicates if the unit is being installed. NB: a change of state may generate an SNMP trap and/or SMTP email alert
| ||||
| StFTPServerIPAddress | 1.3.6.1.4.1.17713.250.4.2 | IpAddress | RO | |
scalar · IpAddress · read-only · current IP address of the TFTP Server from which the TFTP Software Upgrade File Name will be retrieved | ||||
| StFTPServerPortNumber | 1.3.6.1.4.1.17713.250.4.3 | Integer32 (0..65535) | RO | |
scalar · Integer32 (0..65535) · read-only · current The port number of the TFTP Server from which the TFTP Software Upgrade File Name will be retrieved | ||||
| StFTPSoftwareUpgradeFileName | 1.3.6.1.4.1.17713.250.4.4 | DisplayString (SIZE (0..127)) | RO | |
scalar · DisplayString (SIZE (0..127)) · read-only · current Filename of the Software Upgrade to be loaded from the TFTP Server | ||||
| StFTPSoftwareUpgradeStatus | 1.3.6.1.4.1.17713.250.4.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current status of the TFTP Software upgrade process
| ||||
| StFTPSoftwareUpgradeStatusText | 1.3.6.1.4.1.17713.250.4.6 | DisplayString (SIZE (0..127)) | RO | |
scalar · DisplayString (SIZE (0..127)) · read-only · current Descriptive text describing the status of the TFTP Software upgrade process, including any error details | ||||
| StFTPSoftwareUpgradeStatusAdditionalText | 1.3.6.1.4.1.17713.250.4.7 | DisplayString (SIZE (0..127)) | RO | |
scalar · DisplayString (SIZE (0..127)) · read-only · current Any additional text describing the status of the TFTP Software upgrade process, including any error details | ||||
| NphyStatus | 1.3.6.1.4.1.17713.250.5 | |||
| SreceivePower | 1.3.6.1.4.1.17713.250.5.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current Receive power expressed in tenths of a dBm | ||||
| SvectorError | 1.3.6.1.4.1.17713.250.5.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current The vector error measurement compares the received signal's IQ modulation characteristics to an ideal signal to determine the composite error vector magnitude. The value represented by this attribute is the average vector error over the previous second expressed in tenths of a dB | ||||
| StransmitPower | 1.3.6.1.4.1.17713.250.5.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current Transmit power expressed in tenths of a dBm | ||||
| SlinkLoss | 1.3.6.1.4.1.17713.250.5.5 | Integer32 (-500..500) | RO | |
scalar · Integer32 (-500..500) · read-only · current The wireless link loss expressed in tenths of a dB | ||||
| ScurrentChannel | 1.3.6.1.4.1.17713.250.5.6 | Integer32 (0..63) | RO | |
scalar · Integer32 (0..63) · read-only · current Current active channel | ||||
| SextendedChannel | 1.3.6.1.4.1.17713.250.5.7 | Integer32 (0..63) | RO | |
scalar · Integer32 (0..63) · read-only · current Current extended channel in 40MHz mode | ||||
| SreceiveModulationMode | 1.3.6.1.4.1.17713.250.5.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current active receive modulation mode
| ||||
| StransmitModulationMode | 1.3.6.1.4.1.17713.250.5.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current active transmit modulation mode
| ||||
| ScurrentFreqMHz | 1.3.6.1.4.1.17713.250.5.11 | Integer32 | RO | |
scalar · Integer32 · read-only · current Current channel frequency expressed in integer MHz | ||||
| SextendedFreqMHz | 1.3.6.1.4.1.17713.250.5.12 | Integer32 | RO | |
scalar · Integer32 · read-only · current Extended channel frequency expressed in integer MHz | ||||
| SsignalStrengthRatio | 1.3.6.1.4.1.17713.250.5.13 | Integer32 | RO | |
scalar · Integer32 · read-only · current Signal strength ratio (Vertical / Horizontal) : the number of dB larger the Vertical antenna input is than the Horizontal antenna input expressed in tenths of a dB | ||||
| SsearchState | 1.3.6.1.4.1.17713.250.5.14 | INTEGER | RO | |
scalar · INTEGER · read-only · current Search status of the wireless unit. 'Registering' means that the unit has locked to an OFDM signal, and the wireless link is up. 'Searching' means that no wireless signal has been detected. 'Acquiring' means that a wireless signal has been detected, but the unit has not locked to an OFDM signal.
| ||||
| SnoiseFloor | 1.3.6.1.4.1.17713.250.5.15 | Integer32 | RO | |
scalar · Integer32 · read-only · current Noise floor expressed in tenths of a dBm | ||||
| SradarDetectChannel | 1.3.6.1.4.1.17713.250.5.16 | Integer32 (0..63) | AN | |
scalar · Integer32 (0..63) · accessible-for-notify · current Channel on which Radar has been detected. (Note that this variable is accessible-for-notify only). | ||||
| SmeasuredRange | 1.3.6.1.4.1.17713.250.5.17 | Integer32 | RO | |
scalar · Integer32 · read-only · current Measured distance between the two peer wireless units expressed in tenths of Km. | ||||
| Nalarms | 1.3.6.1.4.1.17713.250.6 | |||
| SnoWirelessChannelAvailable | 1.3.6.1.4.1.17713.250.6.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Spectrum Management was unable to locate a suitable wireless channel to operate on
| ||||
| Nsmtp | 1.3.6.1.4.1.17713.250.7 | |||
| SsMTPServerIPAddress | 1.3.6.1.4.1.17713.250.7.1 | IpAddress | RO | |
scalar · IpAddress · read-only · current IP address of the SMTP server | ||||
| SsMTPServerPortNumber | 1.3.6.1.4.1.17713.250.7.2 | Integer32 (0..65535) | RO | |
scalar · Integer32 (0..65535) · read-only · current Port number of the SMTP server | ||||
| SsMTPSourceEmailAddress | 1.3.6.1.4.1.17713.250.7.3 | DisplayString (SIZE (0..63)) | RO | |
scalar · DisplayString (SIZE (0..63)) · read-only · current The 'from' email address used when constructing the automatically generated e-mail message | ||||
| SsMTPDestinationEmailAddress | 1.3.6.1.4.1.17713.250.7.4 | DisplayString (SIZE (0..63)) | RO | |
scalar · DisplayString (SIZE (0..63)) · read-only · current The 'to' email address used when constructing the automatically generated e-mail message | ||||
| SsMTPEnabledMessages | 1.3.6.1.4.1.17713.250.7.5 | Bits | RO | |
scalar · Bits · read-only · current This controls which SMTP messages the unit will send
| ||||
| NsnmpControl | 1.3.6.1.4.1.17713.250.8 | |||
| SsNMPCommunityTableNumber | 1.3.6.1.4.1.17713.250.8.1 | Integer32 (2) | RO | |
scalar · Integer32 (2) · read-only · current Number of entries in the sNMPCommunityTable. | ||||
| TsNMPCommunityTable | 1.3.6.1.4.1.17713.250.8.2 | NA | ||
table · not-accessible · current SNMP community string configuration table. | ||||
| RsNMPCommunityTableEntry | 1.3.6.1.4.1.17713.250.8.2.1 | NA | ||
| CsNMPCommunityTableIndex | 1.3.6.1.4.1.17713.250.8.2.1.1 | Integer32 (1..2) | NA | |
column · Integer32 (1..2) · not-accessible · current SNMP community value, used to index the SNMPCommunityTable. | ||||
| CsNMPCommunityString | 1.3.6.1.4.1.17713.250.8.2.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The community string for this entry | ||||
| CsNMPCommunityAccess | 1.3.6.1.4.1.17713.250.8.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Whether this community allows read-only or read-write access
| ||||
| CsNMPCommunityOid | 1.3.6.1.4.1.17713.250.8.2.1.4 | OBJECT IDENTIFIER | RO | |
column · OBJECT IDENTIFIER · read-only · current The OID at which the root of this community's subtree starts | ||||
| SsNMPTrapTableNumber | 1.3.6.1.4.1.17713.250.8.3 | Integer32 (2) | RO | |
scalar · Integer32 (2) · read-only · current Number of entries in the sNMPTrapTable. | ||||
| TsNMPTrapTable | 1.3.6.1.4.1.17713.250.8.4 | NA | ||
table · not-accessible · current SNMP trap configuration table. | ||||
| RsNMPTrapTableEntry | 1.3.6.1.4.1.17713.250.8.4.1 | NA | ||
| CsNMPTrapTableIndex | 1.3.6.1.4.1.17713.250.8.4.1.1 | Integer32 (1..2) | NA | |
column · Integer32 (1..2) · not-accessible · current SNMP trap value, used to index the SNMPTrapTable. | ||||
| CsNMPTrapIPAddress | 1.3.6.1.4.1.17713.250.8.4.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address to which all SNMP Traps are sent. | ||||
| CsNMPTrapPortNumber | 1.3.6.1.4.1.17713.250.8.4.1.3 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Destination port for SNMP Traps (default=162). A value of 0 will disable the trap receiver. | ||||
| CsNMPTrapCommunity | 1.3.6.1.4.1.17713.250.8.4.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The community string for this trap entry | ||||
| CsNMPTrapVersion | 1.3.6.1.4.1.17713.250.8.4.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The SNMP protocol version for this trap entry
| ||||
| SsNMPEnabledTraps | 1.3.6.1.4.1.17713.250.8.6 | Bits | RO | |
scalar · Bits · read-only · current This controls which SNMP Traps the unit will send
| ||||
| Nntp | 1.3.6.1.4.1.17713.250.9 | |||
| SnTPState | 1.3.6.1.4.1.17713.250.9.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current NTP control state
| ||||
| SnTPPollInterval | 1.3.6.1.4.1.17713.250.9.2 | Integer32 (60..43200) | RO | |
scalar · Integer32 (60..43200) · read-only · current The NTP server polling interval | ||||
| SnTPSync | 1.3.6.1.4.1.17713.250.9.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current If NTP Sync fails then check the server settings in the Remote Management page, or disable NTP
| ||||
| SnTPLastSync | 1.3.6.1.4.1.17713.250.9.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current Last NTP sync time | ||||
| SsystemClock | 1.3.6.1.4.1.17713.250.9.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current System clock presented as local time | ||||
| StimeZone | 1.3.6.1.4.1.17713.250.9.6 | INTEGER | RO | |
scalar · INTEGER · read-only · current Time zone offsets from Greenwich Mean Time (GMT)
| ||||
| SnTPServerIp | 1.3.6.1.4.1.17713.250.9.7 | IpAddress | RO | |
scalar · IpAddress · read-only · current Specifies the NTP server IP address. | ||||
| SnTPServerPortNumber | 1.3.6.1.4.1.17713.250.9.8 | Integer32 (0..65535) | RO | |
scalar · Integer32 (0..65535) · read-only · current Port number of the NTP server | ||||
| Nversions | 1.3.6.1.4.1.17713.250.10 | |||
| SsoftwareVersion | 1.3.6.1.4.1.17713.250.10.1 | DisplayString (SIZE (0..63)) | RO | |
scalar · DisplayString (SIZE (0..63)) · read-only · current Current software version | ||||
| ShardwareVersion | 1.3.6.1.4.1.17713.250.10.2 | DisplayString (SIZE (0..63)) | RO | |
scalar · DisplayString (SIZE (0..63)) · read-only · current Hardware platform version | ||||
| SbootVersion | 1.3.6.1.4.1.17713.250.10.3 | DisplayString (SIZE (0..63)) | RO | |
scalar · DisplayString (SIZE (0..63)) · read-only · current Boot code software version | ||||
| NpubStats | 1.3.6.1.4.1.17713.250.11 | |||
| SreceiveDataRate | 1.3.6.1.4.1.17713.250.11.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current Average data rate over the last one second interval (tenths of Mbps) | ||||
| StransmitDataRate | 1.3.6.1.4.1.17713.250.11.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current Average data rate over the last one second interval (tenths of Mbps) | ||||
| SaggregateDataRate | 1.3.6.1.4.1.17713.250.11.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current Average data rate over the last one second interval (tenths of Mbps) | ||||
| SwirelessLinkStatus | 1.3.6.1.4.1.17713.250.11.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current status of the wireless link
| ||||
| MptpCompliance | 1.3.6.1.4.1.17713.250.97 | |||
compliance · current The compliance statement for the Cambium Networks PTP MIB | ||||
| NptpGroups | 1.3.6.1.4.1.17713.250.98 | |||
| GconfigurationGroup | 1.3.6.1.4.1.17713.250.98.5 | |||
group · current The configuration object group.
| ||||
| GethernetGroup | 1.3.6.1.4.1.17713.250.98.6 | |||
group · current The ethernet object group. | ||||
| GlicenceGroup | 1.3.6.1.4.1.17713.250.98.8 | |||
| GmanagementGroup | 1.3.6.1.4.1.17713.250.98.9 | |||
group · current The management object group. | ||||
| GphyStatusGroup | 1.3.6.1.4.1.17713.250.98.12 | |||
group · current The phyStatus object group. | ||||
| GalarmsGroup | 1.3.6.1.4.1.17713.250.98.13 | |||
| GsmtpGroup | 1.3.6.1.4.1.17713.250.98.15 | |||
group · current The smtp object group. | ||||
| GsnmpControlGroup | 1.3.6.1.4.1.17713.250.98.16 | |||
group · current The snmpControl object group. | ||||
| GntpGroup | 1.3.6.1.4.1.17713.250.98.17 | |||
group · current The ntp object group. | ||||
| GversionsGroup | 1.3.6.1.4.1.17713.250.98.19 | |||
| GpubStatsGroup | 1.3.6.1.4.1.17713.250.98.20 | |||
group · current The pubStats object group. | ||||
| GnotificationsGroup | 1.3.6.1.4.1.17713.250.98.99 | |||
group · current The notifications group. | ||||
| NptpTraps | 1.3.6.1.4.1.17713.250.99 | |||
| NptpTrapPrefix | 1.3.6.1.4.1.17713.250.99.0 | |||
| !dataPortStatusTrap | 1.3.6.1.4.1.17713.250.99.0.1 | |||
| !installArmStateTrap | 1.3.6.1.4.1.17713.250.99.0.2 | |||
| !noWirelessChannelAvailableTrap | 1.3.6.1.4.1.17713.250.99.0.3 | |||
| !linkStatusTrap | 1.3.6.1.4.1.17713.250.99.0.4 | |||
| !radarDetectTrap | 1.3.6.1.4.1.17713.250.99.0.5 | |||
Traps / Notifications
- dataPortStatusTrap
1.3.6.1.4.1.17713.250.99.0.1 - installArmStateTrap
1.3.6.1.4.1.17713.250.99.0.2 - linkStatusTrap
1.3.6.1.4.1.17713.250.99.0.4 - noWirelessChannelAvailableTrap
1.3.6.1.4.1.17713.250.99.0.3 - radarDetectTrap
1.3.6.1.4.1.17713.250.99.0.5