OCCAM-SENSOR-MIB
Occam Networks, Inc.The OCCAM-ENTITY-SENSOR-MIB is used to monitor the values of Sensors in the BLC1100.
snmptranslate -m OCCAM-SENSOR-MIB -Tpsnmpwalk -v2c -c <community> -m OCCAM-SENSOR-MIB <host> 1.3.6.1.4.1.6066.2.1.3.2Imports
| OCCAM-ENTITY-MIB | PhysicalIndex |
|---|---|
| OCCAM-REG-MODULE | occamGenericHardwareModules |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IsensorMIB | 1.3.6.1.4.1.6066.2.1.3.2 | ||||||||||||||||||||
identity The OCCAM-ENTITY-SENSOR-MIB is used to monitor the values of Sensors in the BLC1100. | |||||||||||||||||||||
| NsensorMIBObjects | 1.3.6.1.4.1.6066.2.1.3.2.1 | ||||||||||||||||||||
| NsensorValues | 1.3.6.1.4.1.6066.2.1.3.2.1.1 | ||||||||||||||||||||
| TsensorTable | 1.3.6.1.4.1.6066.2.1.3.2.1.1.1 | NA | |||||||||||||||||||
table · not-accessible · current This table lists the type, scale, and present value of a Sensor in the BLC1100. | |||||||||||||||||||||
| RsensorEntry | 1.3.6.1.4.1.6066.2.1.3.2.1.1.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An sensorTable entry describes the present reading of a Sensor, the measurement units and scale, and Sensor operational status.
| |||||||||||||||||||||
| CsensorIndex | 1.3.6.1.4.1.6066.2.1.3.2.1.1.1.1.1 | PhysicalIndex | NA | ||||||||||||||||||
column · PhysicalIndex · not-accessible · current This serves as an index for identifying the sensor. | |||||||||||||||||||||
| CsensorName | 1.3.6.1.4.1.6066.2.1.3.2.1.1.1.1.2 | SnmpAdminString | RO | +1.0V | |||||||||||||||||
column · SnmpAdminString · read-only · current This is the textual description of the name of the sensor.For e.g., in the BLC1100 there are two temperature Sensors,and their locations ExternalTempSensor and InternalTempSensor. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsensorType | 1.3.6.1.4.1.6066.2.1.3.2.1.1.1.1.3 | SensorDataType | RO | 2 | |||||||||||||||||
column · SensorDataType · read-only · current This variable indicates the type of data reported by
the sensorValue. This variable is set by the agent at
start-up and the value does not change during
operation.Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsensorValue | 1.3.6.1.4.1.6066.2.1.3.2.1.1.1.1.4 | SensorValue | RO | 1025 | |||||||||||||||||
column · SensorValue · read-only · current This variable reports the most recent measurement seen
by the Sensor. To correctly display or interpret this
variable's value, you must also know sensorType,
sensorScale, and sensorPrecision. However, you can
compare sensorValue with the threshold values given in
sensorThresholdTable without any semantic knowledge.Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsensorScale | 1.3.6.1.4.1.6066.2.1.3.2.1.1.1.1.5 | SensorDataScale | RO | 3 | |||||||||||||||||
column · SensorDataScale · read-only · current This variable indicates the exponent to apply to sensor values reported by entSensorValue. This variable is set by the agent at start-up and the value does not change during operation. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsensorTimeStamp | 1.3.6.1.4.1.6066.2.1.3.2.1.1.1.1.6 | TimeStamp | RO | 454861589 (52d 15h 30m 15s) | |||||||||||||||||
column · TimeStamp · read-only · current This variable indicates the age of the value reported by sensorValue Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsensorEventType | 1.3.6.1.4.1.6066.2.1.3.2.1.1.1.1.7 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current This variable indicates the event type reported by
the sensor. The possible values are:
Cleared,
LowLimitExceeded,
HighLimitExceeded,
AlarmInOn,
AlarmInOff,
FanFastSpeed,
FanSlowSpeed,
wrongSfp. | |||||||||||||||||||||
| SoccamExtAlarmDescription | 1.3.6.1.4.1.6066.2.1.3.2.1.1.2 | DisplayString | AN | ||||||||||||||||||
scalar · DisplayString · accessible-for-notify · current This is the value of the alarm-description as entered by the user. The string is associated with the external alarm detection mechanism and as a variable binding for the occamExtAlarmRaised and occamExtAlarmCleared SNMP Traps | |||||||||||||||||||||
| NsensorThresholds | 1.3.6.1.4.1.6066.2.1.3.2.1.2 | ||||||||||||||||||||
| TsensorThresholdTable | 1.3.6.1.4.1.6066.2.1.3.2.1.2.1 | NA | |||||||||||||||||||
table · not-accessible · current This table lists the threshold severity, relation, and comparison value for a Sensor listed in the sensor Table. | |||||||||||||||||||||
| RsensorThresholdEntry | 1.3.6.1.4.1.6066.2.1.3.2.1.2.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An sensorThresholdTable entry describes the thresholds for a Sensor: the threshold severity, the threshold value, the relation, and the evaluation of the threshold. Only pre-configured thresholds are listed in this table. Entries are created by the agent at system startup. | |||||||||||||||||||||
| CsensorThresholdIndex | 1.3.6.1.4.1.6066.2.1.3.2.1.2.1.1.1 | Integer32 (1..99999999) | NA | ||||||||||||||||||
column · Integer32 (1..99999999) · not-accessible · current An index that uniquely identifies an entry in the sensorThreshold table. This index permits the same Sensor to have several different thresholds. | |||||||||||||||||||||
| CsensorThresholdSeverity | 1.3.6.1.4.1.6066.2.1.3.2.1.2.1.1.2 | SensorThresholdSeverity | RO | ||||||||||||||||||
column · SensorThresholdSeverity · read-only · current This variable indicates the severity of this threshold. | |||||||||||||||||||||
| CsensorThresholdRelation | 1.3.6.1.4.1.6066.2.1.3.2.1.2.1.1.3 | SensorThresholdRelation | RO | ||||||||||||||||||
column · SensorThresholdRelation · read-only · current This variable indicates the relation between Sensor
value (sensorValue) and threshold value
senshresholdValue), required to trigger the alarm. when
evaluating the relation, sensorValue is on the left of
sensorThresholdRelation, sensorThresholdValue is on the
right. in pseudo-code, the evaluation-alarm mechanism
is:
...
if (sensorStatus == ok)
then
if (evaluate(sensorValue, sensorThresholdRelation,
sensorThresholdValue))
then
if (sensorThresholdNotificationEnable == true))
then
raise_alarm(sensorThresholdAlarmOID);
endif
endif
endif
... | |||||||||||||||||||||
| CsensorThresholdValue | 1.3.6.1.4.1.6066.2.1.3.2.1.2.1.1.4 | SensorValue | RO | ||||||||||||||||||
column · SensorValue · read-only · current This variable indicates the value of the threshold. To correctly display or interpret this variable's value, you must also know sensorType, sensorScale, and sensorPrecision. However, you can directly compare sensorValue with the threshold values given in sensorThresholdTable without any semantic knowledge. | |||||||||||||||||||||
| CsensorThresholdNotificationEnable | 1.3.6.1.4.1.6066.2.1.3.2.1.2.1.1.5 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This variable controls generation of sensorThresholdNotification for this threshold. When this variable is true(1), generation of sensorThresholdNotification is enabled. When this variable is false(2), generation of sensorThresholdNotification is disabled. This variable only controls generation of sensorThresholdNotification. | |||||||||||||||||||||
| NsensorMIBTraps | 1.3.6.1.4.1.6066.2.1.3.2.2 | ||||||||||||||||||||
| NsensorMIBTrapsSubID | 1.3.6.1.4.1.6066.2.1.3.2.2.0 | ||||||||||||||||||||
| !sensorThresholdNotification | 1.3.6.1.4.1.6066.2.1.3.2.2.0.1 | ||||||||||||||||||||
notification · current The Sensor value crossed the threshold listed in sensorThresholdTable. This notification is generated once each time the Sensor value crosses the threshold. The agent implementation guarantees prompt, timely evaluation of threshold and generation of this notification. | |||||||||||||||||||||
| !occamExtAlarmRaised | 1.3.6.1.4.1.6066.2.1.3.2.2.0.2 | ||||||||||||||||||||
notification · current An external alarm has been detected, the alarm is described in the associated variable binding.
| |||||||||||||||||||||
| !occamExtAlarmCleared | 1.3.6.1.4.1.6066.2.1.3.2.2.0.3 | ||||||||||||||||||||
notification · current The condition causing the external alarm has been cleared, the alarm is described in the associated variable binding.
| |||||||||||||||||||||
| NsensorMIBConformance | 1.3.6.1.4.1.6066.2.1.3.2.3 | ||||||||||||||||||||
| NsensorMIBGroups | 1.3.6.1.4.1.6066.2.1.3.2.3.1 | ||||||||||||||||||||
| NsensorMIBObjectGroups | 1.3.6.1.4.1.6066.2.1.3.2.3.1.1 | ||||||||||||||||||||
| GsensorGroup | 1.3.6.1.4.1.6066.2.1.3.2.3.1.1.1 | ||||||||||||||||||||
group · current The collection of objects which are used to describe and monitor values of Entity-MIB entPhysicalTable entries of Sensors.
| |||||||||||||||||||||
| GsensorThresholdGroup | 1.3.6.1.4.1.6066.2.1.3.2.3.1.1.2 | ||||||||||||||||||||
group · current The collection of objects which are used to describe and monitor thresholds for Sensors. | |||||||||||||||||||||
| NsensorMIBEventGroups | 1.3.6.1.4.1.6066.2.1.3.2.3.1.2 | ||||||||||||||||||||
| NsensorMIBCompliances | 1.3.6.1.4.1.6066.2.1.3.2.3.2 | ||||||||||||||||||||
| MsensorMIBCompliance | 1.3.6.1.4.1.6066.2.1.3.2.3.2.1 | ||||||||||||||||||||
compliance · current An Entity-MIB implementation that lists Sensors in its entPhysicalTable must implement this group.
| |||||||||||||||||||||
Textual conventions
SensorDataScaleINTEGERcenti(3)kilo(5)mega(6)micro(1)milli(2)units(4)International System of Units (SI) prefixes.
SensorDataTypeINTEGERalarmInput(9)celsius(3)count(12)microAmp(6)microWatt(8)milliAmp(5)milliWatt(7)other(1)rpm(4)sdram(10)usage(11)volts(2)Sensor measurement data types. valid values are: other(1): a measure other than those listed below volts(2): electric potential celsius(3): temperature rpm(4): fan revolutions per minute milliAmp(5): milliampere microAmp(6): microampere milliWatt(7): milliwatt microWatt(8): microwatt alarmInput(9): alarm Input sdram(10): memory SDRAM usage(11): system resource usage count(12): .SensorStatusINTEGERnonoperational(3)ok(1)unavailable(2)Indicates the operational status of the Sensor. ok(1): The agent can read the Sensor value. unavailable(2): The agent presently can not report the Sensor value. nonoperational(3): The agent believes the Sensor is broken. The Sensor could have a hard failure (disconnected wire), or a soft failure such as out-of-range, jittery, or wildly fluctuating readings.SensorThresholdRelationINTEGERequalTo(5)greaterOrEqual(4)greaterThan(3)lessOrEqual(2)lessThan(1)notEqualTo(6)Sensor threshold relational operator types. valid values are: lessThan(1): if the Sensor value is less than the threshold value lessOrEqual(2): if the Sensor value is less than or equal to the threshold value greaterThan(3): if the Sensor value is greater than the threshold value greaterOrEqual(4): if the Sensor value is greater than or equal to the threshold value equalTo(5): if the Sensor value is equal to the threshold value notEqualTo(6): if the Sensor value is not equal to the threshold valueSensorThresholdSeverityINTEGERcritical(30)major(20)minor(10)other(1)Sensor threshold severity. Valid values are: other(1): a severity other than those listed below. minor(10): Minor Problem threshold. major(20): Major Problem threshold. critical(30): Critical Problem Threshold.SensorValueInteger32 (-100000..100000)Display hint:
dFor Sensors that measure voltsAC, voltsDC, celsius this item is a fixed point number ranging from -99,999 to +99,999. Use the value -100000 to indicate underflow. Use the value +100000 to indicate overflow. Use SensorPrecision to indicate how many fractional digits the SensorValue has. For Sensors that measure rpm, this item can take only nonnegative values, 0..99999.
Traps / Notifications
- occamExtAlarmCleared
1.3.6.1.4.1.6066.2.1.3.2.2.0.3 - occamExtAlarmRaised
1.3.6.1.4.1.6066.2.1.3.2.2.0.2 - sensorThresholdNotification
1.3.6.1.4.1.6066.2.1.3.2.2.0.1