E5-120-MIB
Calix Networkssnmptranslate -m E5-120-MIB -Tpsnmpwalk -v2c -c <community> -m E5-120-MIB <host> 1.3.6.1.4.1.6321Imports
| BRIDGE-MIB | BridgeId, MacAddress, Timeout, dot1dBasePort |
|---|---|
| IEEE8021-CFMD8-MIB | dot1agCfmMaIndex, dot1agCfmMdIndex, dot1agCfmMepIdentifier |
| IF-MIB | ifIndex |
| P-BRIDGE-MIB | dot1dTrafficClass |
| Q-BRIDGE-MIB | PortList, VlanIndex, dot1qVlanIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso, private |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| NcalixNetworks | 1.3.6.1.4.1.6321 | |||
| NcalixRegistrations | 1.3.6.1.4.1.6321.1 | |||
| NcalixProducts | 1.3.6.1.4.1.6321.1.2 | |||
| Ne5x100 | 1.3.6.1.4.1.6321.1.2.3 | |||
| Ne5x120 | 1.3.6.1.4.1.6321.1.2.3.3 | |||
| Nalarmconf | 1.3.6.1.4.1.6321.1.2.3.3.2 | |||
| SalarmOps | 1.3.6.1.4.1.6321.1.2.3.3.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The manager sets the corresponding bit value to 1 to start the operation
and the agent clears the object to zero when the operation is successfully completed.
The various bit positions are:
BIT 1: clear
BIT 2: cutoff | ||||
| TalarmConfTable | 1.3.6.1.4.1.6321.1.2.3.3.2.2 | NA | ||
table · not-accessible · current This table includes alarm configuration. | ||||
| RalarmConfEntry | 1.3.6.1.4.1.6321.1.2.3.3.2.2.1 | NA | ||
| CalarmConfId | 1.3.6.1.4.1.6321.1.2.3.3.2.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current 5000:vdslLine_up 5001:vdslLine_down 5002:vdsl_tca_lol 5003:vdsl_tca_lof 5004:vdsl_tca_los 5005:vdsl_tca_lop 5006:vdsl_tca_es 5007:vdsl_tca_ses 5008:vdsl_tca_uas 5009:xd_xtuc_loftrap 5010:xd_xtuc_lostrap 5011:xd_xtur_loftrap 5012:xd_xtur_lostrap 5013:xd_xtur_lprtrap 5014:ad_dhcp_rt_full 5015:ad_dhcp_dm_conflict 5016:ad_dhcp_entry_full 5017:ad_dhcp_ip_dup 5018:ad_dhcp_mac_dup 10000:eqptVol_err 10001:eqptEqpttemp_err 10002:eqptFan_err 10003:eqptHw_rtc_fail 10004:eqptHw_mon_fail 10005:eqptCold_start 10006:eqptWarm_start 10007:eqptAlm_input 10008:eqptAlm_input2 10009:eqptAlm_input3 15000:sysReboot 15001:sysAco 15002:sysAlm_clear 15003:sysLogin_fail 15004:sysAnti_spoofing 15005:sysAlm_svrty_change 15006:sysHost_terminate 20000:enetUp 20001:enetDown 30000:cfmError | ||||
| CalarmConfFacility | 1.3.6.1.4.1.6321.1.2.3.3.2.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Alarm facility.
| ||||
| CalarmConfTarget | 1.3.6.1.4.1.6321.1.2.3.3.2.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The destination which alarms are reported to. Set the bit to 1 to enable the target. BIT 1: snmp trap BIT 2: syslog | ||||
| CalarmConfSeverity | 1.3.6.1.4.1.6321.1.2.3.3.2.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Alarm severity
| ||||
| CalarmConfClearable | 1.3.6.1.4.1.6321.1.2.3.3.2.2.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Setting the object to one indicates that the alarm is to be cleared when user submits alarm clear.
| ||||
| TalarmCurrTable | 1.3.6.1.4.1.6321.1.2.3.3.2.3 | NA | ||
table · not-accessible · current This table includes current alarm information. | ||||
| RalarmCurrEntry | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1 | NA | ||
| CalarmCurrIndex | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Index of the alarm. | ||||
| CalarmCurrOccurTime | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.2 | TimeTicks | RO | |
column · TimeTicks · read-only · current Alarm occurence time (in hundredths of a second) since the system was last re-initialized. | ||||
| CalarmCurrTrapOid | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.3 | OBJECT IDENTIFIER | RO | |
column · OBJECT IDENTIFIER · read-only · current Trap OID of the alarm. | ||||
| CalarmCurrParam1 | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The 1st parameter of the alarm. | ||||
| CalarmCurrParam2 | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The 2nd parameter of the alarm. | ||||
| CalarmCurrParam3 | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The 3rd parameter of the alarm. | ||||
| CalarmCurrParam4 | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The 4th parameter of the alarm. | ||||
| CalarmCurrParam5 | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The 5th parameter of the alarm. | ||||
| CalarmCurrParam6 | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The 6th parameter of the alarm. | ||||
| CalarmCurrParam7 | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The 7th parameter of the alarm. | ||||
| CalarmCurrParam8 | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current The 8th parameter of the alarm. | ||||
| CalarmCurrTimeDescr | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.12 | DisplayString | RO | |
column · DisplayString · read-only · current The string representation of occurence time (YYYY/MM/DD HH:MM:SS). | ||||
| CalarmCurrSeverity | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current The severity of the alarm.
| ||||
| CalarmCurrDescr | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.14 | DisplayString | RO | |
column · DisplayString · read-only · current The description of the alarm. | ||||
| TalarmSeverityPortTable | 1.3.6.1.4.1.6321.1.2.3.3.2.4 | NA | ||
table · not-accessible · current This table includes the configuration of alarm reporting severity threshold for each port. | ||||
| RalarmSeverityPortEntry | 1.3.6.1.4.1.6321.1.2.3.3.2.4.1 | NA | ||
| CseverityThresh | 1.3.6.1.4.1.6321.1.2.3.3.2.4.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The minimum alarm severity that is reported.
| ||||
| Ndiagnostic | 1.3.6.1.4.1.6321.1.2.3.3.4 | |||
| Nselt | 1.3.6.1.4.1.6321.1.2.3.3.4.3 | |||
| SseltTarget | 1.3.6.1.4.1.6321.1.2.3.3.4.3.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current IfIndex of the port which would be performed single end loopback test. | ||||
| SseltOps | 1.3.6.1.4.1.6321.1.2.3.3.4.3.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The manager sets the object to 1 to start the selt and the agent clears the object to zero when selt is successfully completed. | ||||
| SseltStatus | 1.3.6.1.4.1.6321.1.2.3.3.4.3.3 | DisplayString | RO | |
scalar · DisplayString · read-only · current Status description of the selt result. | ||||
| SseltCableType | 1.3.6.1.4.1.6321.1.2.3.3.4.3.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current The cable type that selt result indicates.
| ||||
| SseltLoopEstimateLengthFt | 1.3.6.1.4.1.6321.1.2.3.3.4.3.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current The estimated loop length that selt result indicates.
| ||||
| SseltLoopEstimateLengthMeter | 1.3.6.1.4.1.6321.1.2.3.3.4.3.6 | INTEGER | RO | |
scalar · INTEGER · read-only · current The estimated loop length that selt result indicates.
| ||||
| Nldm | 1.3.6.1.4.1.6321.1.2.3.3.4.4 | |||
| SldmTarget | 1.3.6.1.4.1.6321.1.2.3.3.4.4.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current IfIndex of the port which would be performed ldm test. | ||||
| SldmOps | 1.3.6.1.4.1.6321.1.2.3.3.4.4.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The manager sets the object to 1 to start the ldm test and the agent clears the object to zero when ldm test is successfully completed. | ||||
| SldmStatus | 1.3.6.1.4.1.6321.1.2.3.3.4.4.3 | DisplayString | RO | |
scalar · DisplayString · read-only · current Status description of ldm test result. | ||||
| SldmXtucLoopAttenuation | 1.3.6.1.4.1.6321.1.2.3.3.4.4.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current Loop Attenuation.
| ||||
| SldmXtucSignalAttenuation | 1.3.6.1.4.1.6321.1.2.3.3.4.4.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current Signal Attenuation.
| ||||
| SldmXtucSignalMargin | 1.3.6.1.4.1.6321.1.2.3.3.4.4.6 | INTEGER | RO | |
scalar · INTEGER · read-only · current Signal Margin.
| ||||
| SldmXtucAggregateTxPower | 1.3.6.1.4.1.6321.1.2.3.3.4.4.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current Actual Aggregate Transmit Power.
| ||||
| SldmXtucAttainableBitRate | 1.3.6.1.4.1.6321.1.2.3.3.4.4.8 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Attainable Bit Rate.
| ||||
| SldmXturLoopAttenuation | 1.3.6.1.4.1.6321.1.2.3.3.4.4.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current Loop Attenuation.
| ||||
| SldmXturSignalAttenuation | 1.3.6.1.4.1.6321.1.2.3.3.4.4.10 | INTEGER | RO | |
scalar · INTEGER · read-only · current Signal Attenuation.
| ||||
| SldmXturSignalMargin | 1.3.6.1.4.1.6321.1.2.3.3.4.4.11 | INTEGER | RO | |
scalar · INTEGER · read-only · current Signal Margin.
| ||||
| SldmXturAggregateTxPower | 1.3.6.1.4.1.6321.1.2.3.3.4.4.12 | INTEGER | RO | |
scalar · INTEGER · read-only · current Actual Aggregate Transmit Power.
| ||||
| SldmXturAttainableBitRate | 1.3.6.1.4.1.6321.1.2.3.3.4.4.13 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Attainable Bit Rate.
| ||||
| SldmXtucNumOfSubcarriersPerPort | 1.3.6.1.4.1.6321.1.2.3.3.4.4.14 | INTEGER | RO | |
scalar · INTEGER · read-only · current The number of subcarriers per port for ATU-C. | ||||
| SldmXturNumOfSubcarriersPerPort | 1.3.6.1.4.1.6321.1.2.3.3.4.4.15 | INTEGER | RO | |
scalar · INTEGER · read-only · current The number of subcarriers per port for ATU-R. | ||||
| SldmXtucHlinScale | 1.3.6.1.4.1.6321.1.2.3.3.4.4.16 | INTEGER | RO | |
scalar · INTEGER · read-only · current Scale of Hlin. | ||||
| SldmXtucHlinReal1 | 1.3.6.1.4.1.6321.1.2.3.3.4.4.17 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The object provides real part of Hlin for the first 256 subcarriers. Each subcarrier takes two octets to store the value. | ||||
| SldmXtucHlinReal2 | 1.3.6.1.4.1.6321.1.2.3.3.4.4.18 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The object provides real part of Hlin for the last 256 subcarriers. Each subcarrier takes two octets to store the value. | ||||
| SldmXtucHlinImage1 | 1.3.6.1.4.1.6321.1.2.3.3.4.4.19 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The object provides image part of Hlin for the first 256 subcarriers. Each subcarrier takes two octets to store the value. | ||||
| SldmXtucHlinImage2 | 1.3.6.1.4.1.6321.1.2.3.3.4.4.20 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The object provides image part of Hlin for the last 256 subcarriers. Each subcarrier takes two octets to store the value. | ||||
| SldmXtucHlog1 | 1.3.6.1.4.1.6321.1.2.3.3.4.4.21 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The object provides Hlog for the first 256 subcarriers. Each subcarrier takes two octets to store the value. | ||||
| SldmXtucHlog2 | 1.3.6.1.4.1.6321.1.2.3.3.4.4.22 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The object provides Hlog for the last 256 subcarriers. Each subcarrier takes two octets to store the value. | ||||
| SldmXtucQln1 | 1.3.6.1.4.1.6321.1.2.3.3.4.4.23 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The object provides QLN for the first 256 subcarriers. Each subcarrier takes two octets to store the value. | ||||
| SldmXtucQln2 | 1.3.6.1.4.1.6321.1.2.3.3.4.4.24 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The object provides QLN for the last 256 subcarriers. Each subcarrier takes two octets to store the value. | ||||
| SldmXtucSnr1 | 1.3.6.1.4.1.6321.1.2.3.3.4.4.25 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The object provides SNR for the first 256 subcarriers. Each subcarrier takes two octets to store the value. | ||||
| SldmXtucSnr2 | 1.3.6.1.4.1.6321.1.2.3.3.4.4.26 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The object provides SNR for the last 256 subcarriers. Each subcarrier takes two octets to store the value. | ||||
| SldmXturHlinScale | 1.3.6.1.4.1.6321.1.2.3.3.4.4.27 | INTEGER | RO | |
scalar · INTEGER · read-only · current Scale of Hlin. | ||||
| SldmXturHlinReal | 1.3.6.1.4.1.6321.1.2.3.3.4.4.28 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Real part of Hlin. Each subcarrier takes two octets to store the value. | ||||
| SldmXturHlinImage | 1.3.6.1.4.1.6321.1.2.3.3.4.4.29 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Image part of Hlin. Each subcarrier takes two octets to store the value. | ||||
| SldmXturHlog | 1.3.6.1.4.1.6321.1.2.3.3.4.4.30 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Hlog of subcarrier. Each subcarrier takes two octets to store the value. | ||||
| SldmXturQln | 1.3.6.1.4.1.6321.1.2.3.3.4.4.31 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current QLN of subcarrier. Each subcarrier takes two octets to store the value. | ||||
| SldmXturSnr | 1.3.6.1.4.1.6321.1.2.3.3.4.4.32 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current SNR of subcarrier. Each subcarrier takes two octets to store the value. | ||||
| SldmXtucHlogGroupFactor | 1.3.6.1.4.1.6321.1.2.3.3.4.4.33 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The Hlog group factor of ATU-C. | ||||
| SldmXtucQlnGroupFactor | 1.3.6.1.4.1.6321.1.2.3.3.4.4.34 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The Qln group factor of ATU-C. | ||||
| SldmXtucSnrGroupFactor | 1.3.6.1.4.1.6321.1.2.3.3.4.4.35 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The Snr group factor of ATU-C. | ||||
| SldmXturHlogGroupFactor | 1.3.6.1.4.1.6321.1.2.3.3.4.4.36 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The Hlog group factor of ATU-R. | ||||
| SldmXturQlnGroupFactor | 1.3.6.1.4.1.6321.1.2.3.3.4.4.37 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The Qln group factor of ATU-R. | ||||
| SldmXturSnrGroupFactor | 1.3.6.1.4.1.6321.1.2.3.3.4.4.38 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The Snr group factor of ATU-R. | ||||
| Nmulticast | 1.3.6.1.4.1.6321.1.2.3.3.7 | |||
| SigmpEnable | 1.3.6.1.4.1.6321.1.2.3.3.7.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable IGMP protocol.
| ||||
| NmcastBandwidth | 1.3.6.1.4.1.6321.1.2.3.3.7.4 | |||
| SmcastDefaultBandwidth | 1.3.6.1.4.1.6321.1.2.3.3.7.4.1 | INTEGER (1..100000) | RW | |
scalar · INTEGER (1..100000) · read-write · current Default bandwidth requirement for a multicast channel.
| ||||
| SmaxNumOfMcastBw | 1.3.6.1.4.1.6321.1.2.3.3.7.4.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of row entries that user can create in mcastBwTable. | ||||
| TmcastBwTable | 1.3.6.1.4.1.6321.1.2.3.3.7.4.3 | NA | ||
table · not-accessible · current This table defines bandwidth budget for a range of multicast IP channels. | ||||
| RmcastBwEntry | 1.3.6.1.4.1.6321.1.2.3.3.7.4.3.1 | NA | ||
row · not-accessible · current An entry of mcastBwTable. | ||||
| CmcastBwIndex | 1.3.6.1.4.1.6321.1.2.3.3.7.4.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The index which specify the entry. | ||||
| CmcastBwStartIp | 1.3.6.1.4.1.6321.1.2.3.3.7.4.3.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The start multicast IP of the bandwidth control range. | ||||
| CmcastBwEndIp | 1.3.6.1.4.1.6321.1.2.3.3.7.4.3.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The end multicast IP of the bandwidth control range. | ||||
| CmcastBwBandwidth | 1.3.6.1.4.1.6321.1.2.3.3.7.4.3.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current The bandwidth budget for the multicast IP channels.
| ||||
| CmcastBwRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.7.4.3.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of the entry. | ||||
| TmcastBwPortTable | 1.3.6.1.4.1.6321.1.2.3.3.7.4.4 | NA | ||
table · not-accessible · current This table specify the multicast bandwidth control of the port. | ||||
| RmcastBwPortEntry | 1.3.6.1.4.1.6321.1.2.3.3.7.4.4.1 | NA | ||
| CmcastBwPortEnable | 1.3.6.1.4.1.6321.1.2.3.3.7.4.4.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable multicast bandwidth control for a port.
| ||||
| CmcastBwPortBandwidth | 1.3.6.1.4.1.6321.1.2.3.3.7.4.4.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Set bandwidth threshold for a port.
| ||||
| NigmpCount | 1.3.6.1.4.1.6321.1.2.3.3.7.5 | |||
| TigmpCountPortTable | 1.3.6.1.4.1.6321.1.2.3.3.7.5.1 | NA | ||
table · not-accessible · current This table specify the IGMP count limiting of the port. | ||||
| RigmpCountPortEntry | 1.3.6.1.4.1.6321.1.2.3.3.7.5.1.1 | NA | ||
| CigmpCountPortEnable | 1.3.6.1.4.1.6321.1.2.3.3.7.5.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable IGMP count limiting for a port.
| ||||
| CigmpCountPortLimit | 1.3.6.1.4.1.6321.1.2.3.3.7.5.1.1.2 | INTEGER (0..16) | RW | |
column · INTEGER (0..16) · read-write · current The maximum allowed IGMP report count for a port. | ||||
| Nmvlan | 1.3.6.1.4.1.6321.1.2.3.3.7.6 | |||
| SmaxNumOfMvlan | 1.3.6.1.4.1.6321.1.2.3.3.7.6.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of row entries that user can create in mvlanTable. | ||||
| TmvlanTable | 1.3.6.1.4.1.6321.1.2.3.3.7.6.2 | NA | ||
table · not-accessible · current A table containing static configuration information for each multicast VLAN configured into the device. | ||||
| RmvlanEntry | 1.3.6.1.4.1.6321.1.2.3.3.7.6.2.1 | NA | ||
| CmvlanIndex | 1.3.6.1.4.1.6321.1.2.3.3.7.6.2.1.1 | VlanIndex | RO | |
column · VlanIndex · read-only · current The VLAN-ID refering to this VLAN. | ||||
| CmvlanName | 1.3.6.1.4.1.6321.1.2.3.3.7.6.2.1.2 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current An administratively assigned string, which may be used to identify the VLAN. | ||||
| CmvlanEgressPorts | 1.3.6.1.4.1.6321.1.2.3.3.7.6.2.1.3 | PortList | RC | |
column · PortList · read-create · current The set of ports which are permanently assigned to the egress list for this multicast VLAN. | ||||
| CmvlanUntaggedPorts | 1.3.6.1.4.1.6321.1.2.3.3.7.6.2.1.4 | PortList | RC | |
column · PortList · read-create · current The set of ports which should transmit egress packets for this multicast VLAN as untagged. | ||||
| CmvlanRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.7.6.2.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry. | ||||
| TmvlanTranslateTable | 1.3.6.1.4.1.6321.1.2.3.3.7.6.3 | NA | ||
table · not-accessible · current A table that contains multicast to VLAN translation. | ||||
| RmvlanTranslateEntry | 1.3.6.1.4.1.6321.1.2.3.3.7.6.3.1 | NA | ||
row · not-accessible · current An entry of mvlanTranslateTable. | ||||
| CmvlanTranslateIndex | 1.3.6.1.4.1.6321.1.2.3.3.7.6.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The index which specif the entry. | ||||
| CmvlanTranslateStartIp | 1.3.6.1.4.1.6321.1.2.3.3.7.6.3.1.2 | IpAddress | RW | |
column · IpAddress · read-write · current The start IP of the multicast VLAN translation. | ||||
| CmvlanTranslateEndIp | 1.3.6.1.4.1.6321.1.2.3.3.7.6.3.1.3 | IpAddress | RW | |
column · IpAddress · read-write · current The end IP of the multicast VLAN translation. | ||||
| NqueryVid | 1.3.6.1.4.1.6321.1.2.3.3.7.7 | |||
| SmaxNumOfQryVid | 1.3.6.1.4.1.6321.1.2.3.3.7.7.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of row entries that user can create in qryVidConfTable. | ||||
| TqryVidConfTable | 1.3.6.1.4.1.6321.1.2.3.3.7.7.2 | NA | ||
table · not-accessible · current This table defines statically set VLANs used for response IGMP report. | ||||
| RqryVidConfEntry | 1.3.6.1.4.1.6321.1.2.3.3.7.7.2.1 | NA | ||
| CqryVid | 1.3.6.1.4.1.6321.1.2.3.3.7.7.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current VLAN ID. | ||||
| CqryVidRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.7.7.2.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry. | ||||
| TqryVidStatusTable | 1.3.6.1.4.1.6321.1.2.3.3.7.7.3 | NA | ||
table · not-accessible · current This table shows statically set or dynamically learned VLANs used for response IGMP report. | ||||
| RqryVidStatusEntry | 1.3.6.1.4.1.6321.1.2.3.3.7.7.3.1 | NA | ||
| CqryVidType | 1.3.6.1.4.1.6321.1.2.3.3.7.7.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current VLAN type.
| ||||
| SigmpVersion | 1.3.6.1.4.1.6321.1.2.3.3.7.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting IGMP version.
| ||||
| SigmpLeaveMode | 1.3.6.1.4.1.6321.1.2.3.3.7.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Configure IGMP leave message handling mode.
| ||||
| NigmpTimer | 1.3.6.1.4.1.6321.1.2.3.3.7.11 | |||
| SigmpQryInterval | 1.3.6.1.4.1.6321.1.2.3.3.7.11.1 | INTEGER (10..1000) | RW | |
scalar · INTEGER (10..1000) · read-write · current Set IGMP query interval, 10~1000 in seconds. | ||||
| SigmpRobust | 1.3.6.1.4.1.6321.1.2.3.3.7.11.2 | INTEGER (1..5) | RW | |
scalar · INTEGER (1..5) · read-write · current Set IGMP query Robustness, 1~5. | ||||
| SigmpQryRespInterval | 1.3.6.1.4.1.6321.1.2.3.3.7.11.3 | INTEGER (1..100) | RW | |
scalar · INTEGER (1..100) · read-write · current Set IGMP query response interval, 1~100 in 100 milliseconds. | ||||
| SigmpLastMemQryInterval | 1.3.6.1.4.1.6321.1.2.3.3.7.11.4 | INTEGER (1..5) | RW | |
scalar · INTEGER (1..5) · read-write · current Set IGMP Last Member Query interval, 1~5 in 100 milliseconds. | ||||
| SigmpLastMemQryRobust | 1.3.6.1.4.1.6321.1.2.3.3.7.11.5 | INTEGER (1..5) | RW | |
scalar · INTEGER (1..5) · read-write · current Set Last Member Query Robustness, 1~5. | ||||
| NauditQuery | 1.3.6.1.4.1.6321.1.2.3.3.7.12 | |||
| SauditQryEnable | 1.3.6.1.4.1.6321.1.2.3.3.7.12.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable IGMP audit query.
| ||||
| SauditQryInterval | 1.3.6.1.4.1.6321.1.2.3.3.7.12.2 | INTEGER (1..4) | RW | |
scalar · INTEGER (1..4) · read-write · current Set IGMP Audit Query Interval, 1~4 in 100 milliseconds. | ||||
| SauditQryRobust | 1.3.6.1.4.1.6321.1.2.3.3.7.12.3 | INTEGER (1..5) | RW | |
scalar · INTEGER (1..5) · read-write · current Set IGMP Audit Query Robustness, 1~5. | ||||
| NigmpProfile | 1.3.6.1.4.1.6321.1.2.3.3.7.13 | |||
| SmaxNumberOfIgmpProfiles | 1.3.6.1.4.1.6321.1.2.3.3.7.13.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The max number of IGMP profiles in the system. | ||||
| TigmpProfileTable | 1.3.6.1.4.1.6321.1.2.3.3.7.13.2 | NA | ||
table · not-accessible · current A table that contains IGMP Profiles. | ||||
| RigmpProfileEntry | 1.3.6.1.4.1.6321.1.2.3.3.7.13.2.1 | NA | ||
| CigmpProfileName | 1.3.6.1.4.1.6321.1.2.3.3.7.13.2.1.1 | DisplayString (SIZE (1..31)) | RO | |
column · DisplayString (SIZE (1..31)) · read-only · current The IGMP Profile name. | ||||
| CigmpProfileEnable | 1.3.6.1.4.1.6321.1.2.3.3.7.13.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable IGMP Profile.
| ||||
| CigmpProfileMaxGroup | 1.3.6.1.4.1.6321.1.2.3.3.7.13.2.1.3 | INTEGER (1..64) | RW | |
column · INTEGER (1..64) · read-write · current Set maximum allowed multicast group, 1~64. | ||||
| CigmpProfileRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.7.13.2.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of the IGMP Profile entry. | ||||
| TigmpFilterTable | 1.3.6.1.4.1.6321.1.2.3.3.7.13.3 | NA | ||
table · not-accessible · current A table that contains IGMP Filters. | ||||
| RigmpFilterEntry | 1.3.6.1.4.1.6321.1.2.3.3.7.13.3.1 | NA | ||
| CigmpFilterIndex | 1.3.6.1.4.1.6321.1.2.3.3.7.13.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The index which specifies the filter rule. | ||||
| CigmpFilterStartIp | 1.3.6.1.4.1.6321.1.2.3.3.7.13.3.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The start IP of the filter rule. | ||||
| CigmpFilterEndIp | 1.3.6.1.4.1.6321.1.2.3.3.7.13.3.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The end IP of the filter rule. | ||||
| TigmpProfilePortTable | 1.3.6.1.4.1.6321.1.2.3.3.7.13.4 | NA | ||
table · not-accessible · current This table specifies the IGMP Profile of the port. | ||||
| RigmpProfilePortEntry | 1.3.6.1.4.1.6321.1.2.3.3.7.13.4.1 | NA | ||
| CigmpProfilePortProfile | 1.3.6.1.4.1.6321.1.2.3.3.7.13.4.1.1 | OCTET STRING (SIZE (1..31)) | RW | |
column · OCTET STRING (SIZE (1..31)) · read-write · current The IGMP Profile of the port. | ||||
| Nport | 1.3.6.1.4.1.6321.1.2.3.3.8 | |||
| TsubrPortTable | 1.3.6.1.4.1.6321.1.2.3.3.8.1 | NA | ||
table · not-accessible · current This table includes subscriber attributes for the port. | ||||
| RsubrPortEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.1.1 | NA | ||
| CsubrPortName | 1.3.6.1.4.1.6321.1.2.3.3.8.1.1.1 | DisplayString (SIZE (0..31)) | RW | |
column · DisplayString (SIZE (0..31)) · read-write · current Name of the subscriber. | ||||
| CsubrPortTel | 1.3.6.1.4.1.6321.1.2.3.3.8.1.1.2 | DisplayString (SIZE (0..15)) | RW | |
column · DisplayString (SIZE (0..15)) · read-write · current Telephone number of the subscriber. | ||||
| NvdslPort | 1.3.6.1.4.1.6321.1.2.3.3.8.3 | |||
| TvdslLineConfTable | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1 | NA | ||
table · not-accessible · current This table includes common attributes describing the VDSL line. This table is supported by R2.00 and later versions. | ||||
| RvdslLineConfEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1 | NA | ||
| CvdslLineConfUpbo | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable upstream power backoff control.
| ||||
| CvdslLineConfVdslProfile | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Set VDSL profile.
| ||||
| CvdslLineConfRfiBand | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Set VDSL customized RFI configuration. disable: not apply RFI notch to port ansi: use pre-defined ANSI RFI notch etsi: use pre-defined ETSI notch custom: user needs to define customized RFI notch band through vdslRfiCustomTable
| ||||
| CvdslLineConfIpqosProfile | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.5 | DisplayString | RW | |
| CvdslLineConfVturInp | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.6 | INTEGER (0..160) | RW | |
column · INTEGER (0..160) · read-write · current VTUR minimum INP value
| ||||
| CvdslLineConfVtucInp | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.7 | INTEGER (0..160) | RW | |
column · INTEGER (0..160) · read-write · current VTUC mimimum INT value
| ||||
| CvdslLineConfOptionMask | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Bit1: disable Trellis coding in ADSL mode Bit2: disable Reed-Solomon coding for ADSL Bit3: disable upstream bitswaps Bit4: disable downstream bitwaps Bit5: disable upstream 1-bit constellation support Bit6: disable the transmit windowing in ADSL2+ mode Bit7: disable S=0.5 support in G.dmt Bit8: reserved Bit9: enable nitro Bit10: enable ADSL2 Annex L Bit11: enable ADSL2+ Annex M Bit12: enable US PTM optimization Bit13: enable DS PTM optimization Bit14: enable US PHYR Bit15: enable DS PHYR | ||||
| CvdslLineConfUpboForceLength | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.9 | INTEGER (-5..1270) | RW | |
column · INTEGER (-5..1270) · read-write · current -1 means max(kl0_CO,kl0_CPE). -2 means min(kl0_CO,kl0_CPE). -3 means kl0_CO. -4 means kl0_CPE. -5 means kl0_CPE + delta as calculated from.
| ||||
| CvdslLineConfPsdShape | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current PSD mask type
| ||||
| CvdslLineConfDpbo | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/Disable DPBO
| ||||
| CvdslLineConfDpboParamEsel | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.12 | INTEGER (0..511) | RW | |
column · INTEGER (0..511) · read-write · current DPBO ESEL parameter
| ||||
| CvdslLineConfDpboParamEscma | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.13 | INTEGER (0..640) | RW | |
column · INTEGER (0..640) · read-write · current DPBO ESCMA parameter -1~1.5 in step of 1/256. | ||||
| CvdslLineConfDpboParamEscmb | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.14 | INTEGER (0..640) | RW | |
column · INTEGER (0..640) · read-write · current DPBO ESCMB parameter -1~1.5 in step of 1/256. | ||||
| CvdslLineConfDpboParamEscmc | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.15 | INTEGER (0..640) | RW | |
column · INTEGER (0..640) · read-write · current DPBO ESCMC parameter -1~1.5 in step of 1/256. | ||||
| CvdslLineConfDpboParamMus | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.16 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current DPBO MUS parameter.
| ||||
| CvdslLineConfDpboParamFmin | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.17 | INTEGER (0..2048) | RW | |
column · INTEGER (0..2048) · read-write · current DPBO FMIN parameter
| ||||
| CvdslLineConfDpboParamFmax | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.18 | INTEGER (32..6956) | RW | |
column · INTEGER (32..6956) · read-write · current DPBO FMAX parameter
| ||||
| CvdslLineConfDpboParamPsdId | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.19 | INTEGER | RW | |
column · INTEGER · read-write · current Valid range for setting is 1~6.
| ||||
| NvdslVlan | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2 | |||
| TvdslPortConfTable | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1 | NA | ||
table · not-accessible · current This table includes common attributes describing the VDSL port. This table is supported by R2.00 and later versions. | ||||
| RvdslPortConfEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1 | NA | ||
| CvdslPortConfTlsEnable | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable the transparent LAN service.
| ||||
| CvdslPortConfTlsVid | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1.5 | VlanIndex | RW | |
column · VlanIndex · read-write · current The transparent LAN service s-tag VID. | ||||
| CvdslPortConfTlsPriority | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The transparent LAN service s-tag priority. | ||||
| CvdslPortConfDtEnable | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable the Double Tagging service.
| ||||
| CvdslPortConfDtSVid | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1.8 | VlanIndex | RW | |
column · VlanIndex · read-write · current The Double Tagging service s-tag VID. | ||||
| CvdslPortConfDtSPriority | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current The Double Tagging service s-tag priority. | ||||
| CvdslPortConfDtCVid | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1.10 | VlanIndex | RW | |
column · VlanIndex · read-write · current The Double Tagging service c-tag VID. | ||||
| CvdslPortConfDtCPriority | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current The Double Tagging service c-tag priority. | ||||
| TvdslPortVlanTranslateTable | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2 | NA | ||
table · not-accessible · current A table that contains VLAN translation. | ||||
| RvdslPortVlanTranslateEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2.1 | NA | ||
row · not-accessible · current An entry in vdslPortVlanTranslateTable. | ||||
| CvdslPortVlanTranslateVpi | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the vtt. | ||||
| CvdslPortVlanTranslateVci | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2.1.2 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current VCI of the vtt. | ||||
| CvdslPortVlanTranslateCxvid | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2.1.3 | VlanIndex | RO | |
column · VlanIndex · read-only · current CXVID of the vtt. | ||||
| CvdslPortVlanTranslateCvid | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2.1.4 | VlanIndex | RO | |
column · VlanIndex · read-only · current CVID of the vtt. | ||||
| CvdslPortVlanTranslateSvid | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2.1.5 | VlanIndex | RO | |
column · VlanIndex · read-only · current SVID of the vtt. | ||||
| CvdslPortVlanTranslateDsonly | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2.1.6 | INTEGER (1..2) | RO | |
column · INTEGER (1..2) · read-only · current Donwstream direction only of the vtt. | ||||
| CvdslPortVlanTranslateRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| TvdslPortPvlanTable | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.4 | NA | ||
table · not-accessible · current Protocol VLAN configuration table. | ||||
| RvdslPortPvlanEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.4.1 | NA | ||
| CvdslPortPvlanEtype | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.4.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current 0~0xffff. | ||||
| CvdslPortPvlanVid | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.4.1.2 | VlanIndex | RC | |
| CvdslPortPvlanPriority | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.4.1.3 | INTEGER (0..7) | RC | |
| CvdslPortPvlanRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.4.1.4 | RowStatus | RC | |
| TvdslRfiCustomTable | 1.3.6.1.4.1.6321.1.2.3.3.8.3.3 | NA | ||
table · not-accessible · current This table includes VDSL customized RFI configuration. This table is supported by R2.00 and later versions. | ||||
| RvdslRfiCustomEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.3.3.1 | NA | ||
| CvdslRfiCustomIndex | 1.3.6.1.4.1.6321.1.2.3.3.8.3.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Index of the table. | ||||
| CvdslRfiCustomStartFreq | 1.3.6.1.4.1.6321.1.2.3.3.8.3.3.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The start value of the customized frequency range.
| ||||
| CvdslRfiCustomEndFreq | 1.3.6.1.4.1.6321.1.2.3.3.8.3.3.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The end value of the customized frequency range.
| ||||
| CvdslRfiCustomEnable | 1.3.6.1.4.1.6321.1.2.3.3.8.3.3.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable the customized frequency range setting.
| ||||
| TvdslLineConfUpboParamTable | 1.3.6.1.4.1.6321.1.2.3.3.8.3.4 | NA | ||
table · not-accessible · current This table includes VDSL UPBO configuration. | ||||
| RvdslLineConfUpboParamEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.3.4.1 | NA | ||
row · not-accessible · current An entry in vdslLineConfUpboParamTable. | ||||
| CvdslLineConfUpboParamBand | 1.3.6.1.4.1.6321.1.2.3.3.8.3.4.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Index of the table. | ||||
| CvdslLineConfUpboParamA | 1.3.6.1.4.1.6321.1.2.3.3.8.3.4.1.2 | INTEGER (4000..8095) | RW | |
column · INTEGER (4000..8095) · read-write · current
| ||||
| CvdslLineConfUpboParamB | 1.3.6.1.4.1.6321.1.2.3.3.8.3.4.1.3 | INTEGER (0..4095) | RW | |
column · INTEGER (0..4095) · read-write · current
| ||||
| TvdslLineConfDpboTable | 1.3.6.1.4.1.6321.1.2.3.3.8.3.5 | NA | ||
table · not-accessible · current This table includes VDSL DPBO configuration. | ||||
| RvdslLineConfDpboEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.3.5.1 | NA | ||
| CvdslLineConfDpboIndex | 1.3.6.1.4.1.6321.1.2.3.3.8.3.5.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Index of the table. | ||||
| CvdslLineConfDpboTone | 1.3.6.1.4.1.6321.1.2.3.3.8.3.5.1.2 | INTEGER (1..512) | RW | |
| CvdslLineConfDpboPsd | 1.3.6.1.4.1.6321.1.2.3.3.8.3.5.1.3 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current
| ||||
| Npvc | 1.3.6.1.4.1.6321.1.2.3.3.8.4 | |||
| SmaxNumOfPvcs | 1.3.6.1.4.1.6321.1.2.3.3.8.4.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of PVCs which could be created on a port. | ||||
| TpvcTable | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2 | NA | ||
table · not-accessible · current This table includes PVC configuration. | ||||
| RpvcEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1 | NA | ||
| CpvcVpi | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the pvc. | ||||
| CpvcVci | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VCI of the pvc. | ||||
| CpvcPvid | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.3 | VlanIndex | RO | |
column · VlanIndex · read-only · current Default VID of the pvc. | ||||
| CpvcPriority | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.5 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current 802.1p default priority of the pvc. | ||||
| CpvcProfile | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.6 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The value of this object identifies the row in the ipqosProfileTable. | ||||
| CpvcEncap | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current Encapsulation of the pvc.
| ||||
| CpvcRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| CpvcAcName | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.11 | DisplayString | RC | |
column · DisplayString · read-create · current Access concentrator name for paepvc. | ||||
| CpvcServiceName | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.12 | DisplayString | RC | |
column · DisplayString · read-create · current Service name for paepvc. | ||||
| CpvcHelloTime | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.13 | INTEGER | RC | |
column · INTEGER · read-create · current The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.
| ||||
| CpvcAuto | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.14 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable auto detection for PPPoE/PPPoA encapsulation.
| ||||
| TpvcStateTable | 1.3.6.1.4.1.6321.1.2.3.3.8.4.3 | NA | ||
table · not-accessible · current This table show current PVC status. | ||||
| RpvcStateEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.4.3.1 | NA | ||
row · not-accessible · current An entry in pvcStateTable.
| ||||
| CpvcStateVpi | 1.3.6.1.4.1.6321.1.2.3.3.8.4.3.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the pvc. | ||||
| CpvcStateVci | 1.3.6.1.4.1.6321.1.2.3.3.8.4.3.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VCI of the pvc. | ||||
| CpvcStatePvid | 1.3.6.1.4.1.6321.1.2.3.3.8.4.3.1.3 | VlanIndex | RO | |
column · VlanIndex · read-only · current Default VID of the pvc. | ||||
| CpvcStatePriority | 1.3.6.1.4.1.6321.1.2.3.3.8.4.3.1.4 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current 802.1p default priority of the pvc. | ||||
| CpvcStateChannelType | 1.3.6.1.4.1.6321.1.2.3.3.8.4.3.1.8 | DisplayString (SIZE (1..31)) | RO | |
column · DisplayString (SIZE (1..31)) · read-only · current The value of this object identifies the channel type at runtime. | ||||
| CpvcStateEncap | 1.3.6.1.4.1.6321.1.2.3.3.8.4.3.1.9 | DisplayString (SIZE (1..31)) | RO | |
column · DisplayString (SIZE (1..31)) · read-only · current The value of this object identifies the channel encapsulation at runtime. | ||||
| Nrpvc | 1.3.6.1.4.1.6321.1.2.3.3.8.8 | |||
| TrpvcGatewayTable | 1.3.6.1.4.1.6321.1.2.3.3.8.8.1 | NA | ||
table · not-accessible · current This table includes Routed Gateway configuration. | ||||
| RrpvcGatewayEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.8.1.1 | NA | ||
| CrpvcGatewayIp | 1.3.6.1.4.1.6321.1.2.3.3.8.8.1.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current IP of RPVC gateway. | ||||
| CrpvcGatewayVlanId | 1.3.6.1.4.1.6321.1.2.3.3.8.8.1.1.2 | VlanIndex | RW | |
column · VlanIndex · read-write · current Vlan id send to this RPVC gateway. | ||||
| CrpvcGatewayRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.8.8.1.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| CrpvcGatewayPriority | 1.3.6.1.4.1.6321.1.2.3.3.8.8.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current 802.1p p bit send to this RPVC gateway. | ||||
| TrpvcTable | 1.3.6.1.4.1.6321.1.2.3.3.8.8.2 | NA | ||
table · not-accessible · current This table includes RPVC configuration. | ||||
| RrpvcEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1 | NA | ||
row · not-accessible · current An entry in rpvcTable.
| ||||
| CrpvcVpi | 1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the rpvc. | ||||
| CrpvcVci | 1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VCI of the rpvc. | ||||
| CrpvcEncap | 1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Encapsulation of the rpvc.
| ||||
| CrpvcProfile | 1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1.4 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The ipqos profile of the rpvc. | ||||
| CrpvcIp | 1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current The IP of the rpvc. | ||||
| CrpvcNetmask | 1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1.6 | IpAddress | RO | |
column · IpAddress · read-only · current The IP mask of the rpvc IP. | ||||
| CrpvcGatewayIpAddress | 1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1.7 | IpAddress | RC | |
column · IpAddress · read-create · current The gateway IP of rpvc. | ||||
| CrpvcRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| TrpvcRouteDomainTable | 1.3.6.1.4.1.6321.1.2.3.3.8.8.3 | NA | ||
table · not-accessible · current This table includes RPVC route domain configuration. | ||||
| RrpvcRouteDomainEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.8.3.1 | NA | ||
row · not-accessible · current An entry in rpvcRouteDomainTable. | ||||
| CrpvcRouteDomainVpi | 1.3.6.1.4.1.6321.1.2.3.3.8.8.3.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the rpvc. | ||||
| CrpvcRouteDomainVci | 1.3.6.1.4.1.6321.1.2.3.3.8.8.3.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VCI of the rpvc. | ||||
| CrpvcRouteDomainIp | 1.3.6.1.4.1.6321.1.2.3.3.8.8.3.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The route domain IP. | ||||
| CrpvcRouteDomainNetmask | 1.3.6.1.4.1.6321.1.2.3.3.8.8.3.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The IP mask of the route domain IP. | ||||
| CrpvcRouteDomainRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.8.8.3.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| SrpvcArpAgingTime | 1.3.6.1.4.1.6321.1.2.3.3.8.8.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set RPVC ARP proxy aging time 10..10000 seconds, 0 to disable againg. | ||||
| SrpvcArpFlush | 1.3.6.1.4.1.6321.1.2.3.3.8.8.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Flush the RPVC ARP proxy table.
| ||||
| TdsBcastDisableTable | 1.3.6.1.4.1.6321.1.2.3.3.8.9 | NA | ||
table · not-accessible · current This table includes Down Stream Bcast configuration. | ||||
| RdsBcastDisableEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.9.1 | NA | ||
row · not-accessible · current An entry in Down Stream Bcast table.
| ||||
| CdsBcastDisableVlanId | 1.3.6.1.4.1.6321.1.2.3.3.8.9.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current downstream broadcast disabled vid. | ||||
| CdsBcastDisableRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.8.9.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| Npaepvc | 1.3.6.1.4.1.6321.1.2.3.3.8.10 | |||
| TpaepvcTable | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1 | NA | ||
table · not-accessible · current This table includes PPPoAoE PVC configuration. | ||||
| RpaepvcEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1 | NA | ||
row · not-accessible · current An entry of paepvcTable.
| ||||
| CpaepvcVpi | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the pvc. | ||||
| CpaepvcVci | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VCI of the pvc. | ||||
| CpaepvcPvid | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.3 | VlanIndex | RO | |
column · VlanIndex · read-only · current Default VID of the pvc. | ||||
| CpaepvcEncap | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Encapsulation of the paepvc.
| ||||
| CpaepvcPriority | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.5 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current 802.1p default priority of the pvc. | ||||
| CpaepvcProfile | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.6 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The value of this object identifies the row in the ipqosProfileTable. | ||||
| CpaepvcAcName | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.7 | DisplayString | RC | |
column · DisplayString · read-create · current Access concentrator name. | ||||
| CpaepvcServiceName | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.8 | DisplayString | RC | |
column · DisplayString · read-create · current Service name. | ||||
| CpaepvcHelloTime | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.
| ||||
| CpaepvcRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.10 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| CpaepvcCvid | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.12 | VlanIndex | RC | |
column · VlanIndex · read-create · current Default C-VID of the pvc. | ||||
| CpaepvcCPriority | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.13 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current 802.1p default C-priority of the pvc. | ||||
| Ntlspvc | 1.3.6.1.4.1.6321.1.2.3.3.8.11 | |||
| TtlspvcTable | 1.3.6.1.4.1.6321.1.2.3.3.8.11.1 | NA | ||
table · not-accessible · current This table includes Transparent LAN Service (TLS) PVC configuration. | ||||
| RtlspvcEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.11.1.1 | NA | ||
row · not-accessible · current An entry of tlspvcTable.
| ||||
| CtlspvcVpi | 1.3.6.1.4.1.6321.1.2.3.3.8.11.1.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the pvc. | ||||
| CtlspvcVci | 1.3.6.1.4.1.6321.1.2.3.3.8.11.1.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VCI of the pvc. | ||||
| CtlspvcSvid | 1.3.6.1.4.1.6321.1.2.3.3.8.11.1.1.3 | VlanIndex | RO | |
column · VlanIndex · read-only · current s-tag VLAN ID of the pvc. | ||||
| CtlspvcEncap | 1.3.6.1.4.1.6321.1.2.3.3.8.11.1.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Encapsulation of the tlspvc.
| ||||
| CtlspvcSpriority | 1.3.6.1.4.1.6321.1.2.3.3.8.11.1.1.5 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current s-tag priority of the pvc. | ||||
| CtlspvcProfile | 1.3.6.1.4.1.6321.1.2.3.3.8.11.1.1.6 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The value of this object identifies the row in the ipqosProfileTable. | ||||
| CtlspvcRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.8.11.1.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| Ndtpvc | 1.3.6.1.4.1.6321.1.2.3.3.8.13 | |||
| TdtpvcTable | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1 | NA | ||
table · not-accessible · current This table includes Double Tagging (DT) PVC configuration. | ||||
| RdtpvcEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1 | NA | ||
| CdtpvcVpi | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the pvc. | ||||
| CdtpvcVci | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VCI of the pvc. | ||||
| CdtpvcSvid | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.3 | VlanIndex | RO | |
column · VlanIndex · read-only · current s-tag VLAN ID of the pvc. | ||||
| CdtpvcSpriority | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.4 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current s-tag priority of the pvc. | ||||
| CdtpvcCvid | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.5 | VlanIndex | RC | |
column · VlanIndex · read-create · current c-tag VLAN ID of the pvc. | ||||
| CdtpvcCpriority | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.6 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current c-tag priority of the pvc. | ||||
| CdtpvcEncap | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current Encapsulation of the dtpvc.
| ||||
| CdtpvcProfile | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.8 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The value of this object identifies the row in the ipqosProfileTable. | ||||
| CdtpvcRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.9 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| CdtpvcSuperChannel | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current Specified the configured DTPVC is a super channel.
| ||||
| CdtpvcAcName | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.11 | DisplayString | RC | |
column · DisplayString · read-create · current Access concentrator name for paepvc. | ||||
| CdtpvcServiceName | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.12 | DisplayString | RC | |
column · DisplayString · read-create · current Service name for paepvc. | ||||
| CdtpvcHelloTime | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.13 | INTEGER | RC | |
column · INTEGER · read-create · current The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.
| ||||
| CdtpvcAuto | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.14 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable auto detection for PPPoE/PPPoA encapsulation.
| ||||
| TdtpvcStateTable | 1.3.6.1.4.1.6321.1.2.3.3.8.13.2 | NA | ||
table · not-accessible · current This table show current DTPVC status. | ||||
| RdtpvcStateEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1 | NA | ||
row · not-accessible · current An entry in dtpvcStateTable. | ||||
| CdtpvcStateVpi | 1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the dtpvc. | ||||
| CdtpvcStateVci | 1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VCI of the dtpvc. | ||||
| CdtpvcStateSvid | 1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1.3 | VlanIndex | RO | |
column · VlanIndex · read-only · current Default S-VID of the dtpvc. | ||||
| CdtpvcStateSPriority | 1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1.4 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current S-priority of the dtpvc. | ||||
| CdtpvcStateCvid | 1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1.5 | VlanIndex | RO | |
column · VlanIndex · read-only · current Default C-VID of the dtpvc. | ||||
| CdtpvcStateCPriority | 1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1.6 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current C-priority of the dtpvc. | ||||
| CdtpvcStateChannelType | 1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1.8 | DisplayString (SIZE (1..31)) | RO | |
column · DisplayString (SIZE (1..31)) · read-only · current The value of this object identifies the channel type at runtime. | ||||
| CdtpvcStateEncap | 1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1.9 | DisplayString (SIZE (1..31)) | RO | |
column · DisplayString (SIZE (1..31)) · read-only · current The value of this object identifies the channel encapsulation at runtime. | ||||
| NsnrMgn | 1.3.6.1.4.1.6321.1.2.3.3.8.15 | |||
| TsnrMgnTable | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1 | NA | ||
table · not-accessible · current A table containing the per port SNR Margin configuration. | ||||
| RsnrMgnEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1 | NA | ||
| CsnrMgnMode | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Configure DSL SNR margin configuration mode of the specified ports. Profile: the SNR margin configuration comes from DSL profile. Line: the SNR margin configuration comes from line configuration.
| ||||
| CsnrMgnUcTarget | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.2 | INTEGER (0..310) | RW | |
column · INTEGER (0..310) · read-write · current Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.
| ||||
| CsnrMgnUcMax | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.3 | INTEGER (0..310) | RW | |
column · INTEGER (0..310) · read-write · current Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation.
| ||||
| CsnrMgnUcMin | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.4 | INTEGER (0..310) | RW | |
column · INTEGER (0..310) · read-write · current Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or shut down.
| ||||
| CsnrMgnUcDownshift | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.5 | INTEGER (0..310) | RW | |
column · INTEGER (0..310) · read-write · current Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that RADSL mode is not present, the value will be `0'.
| ||||
| CsnrMgnUcUpshift | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.6 | INTEGER (0..310) | RW | |
column · INTEGER (0..310) · read-write · current Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that RADSL is not present, the value will be `0'.
| ||||
| CsnrMgnUrTarget | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.7 | INTEGER (0..310) | RW | |
column · INTEGER (0..310) · read-write · current Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.
| ||||
| CsnrMgnUrMax | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.8 | INTEGER (0..310) | RW | |
column · INTEGER (0..310) · read-write · current Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation.
| ||||
| CsnrMgnUrMin | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.9 | INTEGER (0..310) | RW | |
column · INTEGER (0..310) · read-write · current Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or shut down.
| ||||
| CsnrMgnUrDownshift | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.10 | INTEGER (0..310) | RW | |
column · INTEGER (0..310) · read-write · current Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that RADSL mode is not present, the value will be `0'.
| ||||
| CsnrMgnUrUpshift | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.11 | INTEGER (0..310) | RW | |
column · INTEGER (0..310) · read-write · current Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that RADSL is not present, the value will be `0'.
| ||||
| NdslRate | 1.3.6.1.4.1.6321.1.2.3.3.8.16 | |||
| TdslRateTable | 1.3.6.1.4.1.6321.1.2.3.3.8.16.1 | NA | ||
table · not-accessible · current A table containing the per port DSL Rate configuration. | ||||
| RdslRateEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1 | NA | ||
| CdslRateMode | 1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Configure DSL Rate configuration mode of the specified ports. Profile: the DSL Rate configuration comes from DSL profile. Line: the DSL Rate configuration comes from line configuration.
| ||||
| CdslRateLatencyMode | 1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The latency mode is fast or interleave
| ||||
| CdslRateXtucMaxInterleaveDelay | 1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1.3 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency.
| ||||
| CdslRateXtucMaxTxRate | 1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1.4 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Configured Maximum Transmit rate for `Fast' or `Interleave' channels, in bps.
| ||||
| CdslRateXtucMinTxRate | 1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1.5 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Configured Minimum Transmit rate for `Fast' or `Interleave' channels, in bps
| ||||
| CdslRateXturMaxInterleaveDelay | 1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1.6 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency
| ||||
| CdslRateXturMaxTxRate | 1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1.7 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.
| ||||
| CdslRateXturMinTxRate | 1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1.8 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Configured Maximum Transmit rate for `Fast' or `Interleave' channels, in bps.
| ||||
| Ngbond | 1.3.6.1.4.1.6321.1.2.3.3.8.51 | |||
| TgbondGroupTable | 1.3.6.1.4.1.6321.1.2.3.3.8.51.1 | NA | ||
table · not-accessible · current A table containing the G.Bond configuration information for each bonding group of the device. | ||||
| RgbondGroupEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.51.1.1 | NA | ||
| CgbondGroupName | 1.3.6.1.4.1.6321.1.2.3.3.8.51.1.1.1 | OCTET STRING (SIZE (0..31)) | RO | |
column · OCTET STRING (SIZE (0..31)) · read-only · current An administratively assigned string, which may be used to identify bonding group. | ||||
| CgbondGroupPorts | 1.3.6.1.4.1.6321.1.2.3.3.8.51.1.1.2 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current The set of ports which are currently assigned to the
bonding group of specified group name.
Byte 1: Reserved(chassis)
Byte 2~3: Reserved(slot)
Byte 4: Reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc. | ||||
| CgbondGroupUpRate | 1.3.6.1.4.1.6321.1.2.3.3.8.51.1.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The UP stream rate. | ||||
| CgbondGroupDownRate | 1.3.6.1.4.1.6321.1.2.3.3.8.51.1.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The DOWN stream rate. | ||||
| CgbondGroupRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.8.51.1.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry. | ||||
| Nprofile | 1.3.6.1.4.1.6321.1.2.3.3.9 | |||
| NsraShiftMarginProfile | 1.3.6.1.4.1.6321.1.2.3.3.9.1 | |||
| TsraShiftMarginProfileTable | 1.3.6.1.4.1.6321.1.2.3.3.9.1.1 | NA | ||
table · not-accessible · current This table includes sra shift margin related configuration. | ||||
| RsraShiftMarginProfileEntry | 1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1 | NA | ||
| CsraShiftMarginProfileName | 1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.1 | DisplayString (SIZE (1..40)) | RO | |
column · DisplayString (SIZE (1..40)) · read-only · current This object identifies a row in this table. | ||||
| CxtucConfDownshiftSnrMgn | 1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.2 | INTEGER (0..31) | RC | |
column · INTEGER (0..31) · read-create · current Specifies the downstream SRA Down Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db. | ||||
| CxtucConfUpshiftSnrMgn | 1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.3 | INTEGER (0..31) | RC | |
column · INTEGER (0..31) · read-create · current Specifies the downstream SRA UP Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db. | ||||
| CxtucConfDownshiftTime | 1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.4 | INTEGER (0..31) | RO | |
column · INTEGER (0..31) · read-only · current Specifies the downstream SRA Down Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec. | ||||
| CxtucConfUpshiftTime | 1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.5 | INTEGER (0..31) | RO | |
column · INTEGER (0..31) · read-only · current Specifies the downstream SRA UP Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec. | ||||
| CxturConfDownshiftSnrMgn | 1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.6 | INTEGER (0..31) | RC | |
column · INTEGER (0..31) · read-create · current Specifies the upstream SRA Down Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db. | ||||
| CxturConfUpshiftSnrMgn | 1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.7 | INTEGER (0..31) | RC | |
column · INTEGER (0..31) · read-create · current Specifies the upstream SRA UP Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db. | ||||
| CxturConfDownshiftTime | 1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.8 | INTEGER (0..31) | RO | |
column · INTEGER (0..31) · read-only · current Specifies the upstream SRA Down Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec. | ||||
| CxturConfUpshiftTime | 1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.9 | INTEGER (0..31) | RO | |
column · INTEGER (0..31) · read-only · current Specifies the upstream SRA UP Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec. | ||||
| CsraShiftMarginProfileStatus | 1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.10 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or modify or delete an existing row in this table. | ||||
| NipqosProfile | 1.3.6.1.4.1.6321.1.2.3.3.9.8 | |||
| SmaxNumOfIpqosProfiles | 1.3.6.1.4.1.6321.1.2.3.3.9.8.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of IPQOS profiles supported by the system. | ||||
| TipqosProfileTable | 1.3.6.1.4.1.6321.1.2.3.3.9.8.2 | NA | ||
table · not-accessible · current This table includes IPQOS related configuration. | ||||
| RipqosProfileEntry | 1.3.6.1.4.1.6321.1.2.3.3.9.8.2.1 | NA | ||
row · not-accessible · current An entry in ipqosProfileTable. | ||||
| CipqosProfileName | 1.3.6.1.4.1.6321.1.2.3.3.9.8.2.1.1 | DisplayString (SIZE (1..31)) | RO | |
column · DisplayString (SIZE (1..31)) · read-only · current This object is used by the IPQOS profile table in order to identify a row of this table. | ||||
| CipqosProfileNumOfQueue | 1.3.6.1.4.1.6321.1.2.3.3.9.8.2.1.2 | INTEGER (1..8) | RC | |
column · INTEGER (1..8) · read-create · current The number of IPQOS queues. | ||||
| CipqosProfileRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.9.8.2.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in the table. | ||||
| TipqosProfileQueueTable | 1.3.6.1.4.1.6321.1.2.3.3.9.8.3 | NA | ||
table · not-accessible · current This table includes IPQOS queue related configuration. | ||||
| RipqosProfileQueueEntry | 1.3.6.1.4.1.6321.1.2.3.3.9.8.3.1 | NA | ||
row · not-accessible · current An entry in ipqosProfileQueueTable. | ||||
| CipqosProfileQueueIndex | 1.3.6.1.4.1.6321.1.2.3.3.9.8.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current IPQOS queue index. | ||||
| CipqosProfileQueuePIR | 1.3.6.1.4.1.6321.1.2.3.3.9.8.3.1.2 | INTEGER (512..131072) | RW | |
column · INTEGER (512..131072) · read-write · current Peak rate.(multiple of 256)
| ||||
| CipqosProfileQueueCIR | 1.3.6.1.4.1.6321.1.2.3.3.9.8.3.1.3 | INTEGER (256..65536) | RW | |
column · INTEGER (256..65536) · read-write · current Commited rate.(multiple of 256)
| ||||
| CipqosProfileQueuePBS | 1.3.6.1.4.1.6321.1.2.3.3.9.8.3.1.4 | INTEGER (3072..65536) | RW | |
column · INTEGER (3072..65536) · read-write · current Peak burst size.(mutiple of 256)
| ||||
| CipqosProfileQueueCBS | 1.3.6.1.4.1.6321.1.2.3.3.9.8.3.1.5 | INTEGER (3072..65536) | RW | |
column · INTEGER (3072..65536) · read-write · current Commited burst size.(mutiple of 256)
| ||||
| CipqosProfileQueueLevel | 1.3.6.1.4.1.6321.1.2.3.3.9.8.3.1.6 | INTEGER (0..7) | RW | |
column · INTEGER (0..7) · read-write · current Queue level.
| ||||
| CipqosProfileQueueWeight | 1.3.6.1.4.1.6321.1.2.3.3.9.8.3.1.7 | INTEGER (1..127) | RW | |
column · INTEGER (1..127) · read-write · current Queue weight.
| ||||
| Nswitch | 1.3.6.1.4.1.6321.1.2.3.3.10 | |||
| Ndot3ad | 1.3.6.1.4.1.6321.1.2.3.3.10.6 | |||
| Tdot3adTable | 1.3.6.1.4.1.6321.1.2.3.3.10.6.1 | NA | ||
table · not-accessible · current The table contains 802.3ad configuration. | ||||
| Rdot3adEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.6.1.1 | NA | ||
row · not-accessible · current
| ||||
| Cdot3adGroupId | 1.3.6.1.4.1.6321.1.2.3.3.10.6.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Group ID 1 for the subtending group and 2 for the uplink group. | ||||
| Cdot3adEnable | 1.3.6.1.4.1.6321.1.2.3.3.10.6.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable 802.3ad function.
| ||||
| SlacpPriority | 1.3.6.1.4.1.6321.1.2.3.3.10.6.2 | INTEGER (0..65535) | RW | |
scalar · INTEGER (0..65535) · read-write · current LACP system priority. | ||||
| SlacpTimeout | 1.3.6.1.4.1.6321.1.2.3.3.10.6.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current The time interval to exchange LACP packets in order to check that the peer port in the trunk group is still up.
| ||||
| TportTrunkingTable | 1.3.6.1.4.1.6321.1.2.3.3.10.6.4 | NA | ||
table · not-accessible · current The table contains current status of port trunking. | ||||
| RportTrunkingEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.6.4.1 | NA | ||
row · not-accessible · current
| ||||
| CportTrunkingGroupId | 1.3.6.1.4.1.6321.1.2.3.3.10.6.4.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Group ID 1 for the subtending group and 2 for the uplink group. | ||||
| CportTrunkingStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.6.4.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Port trunking status.
| ||||
| CportTrunkingPortList | 1.3.6.1.4.1.6321.1.2.3.3.10.6.4.1.3 | PortList | RO | |
column · PortList · read-only · current The port list which actually joins the trunking group. | ||||
| Ndscp | 1.3.6.1.4.1.6321.1.2.3.3.10.10 | |||
| TdscpMappingTable | 1.3.6.1.4.1.6321.1.2.3.3.10.10.1 | NA | ||
table · not-accessible · current The table contains DSCP mapping configuration for the adsl ports. | ||||
| RdscpMappingEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.10.1.1 | NA | ||
| CdscpSrcCodePoint | 1.3.6.1.4.1.6321.1.2.3.3.10.10.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The DSCP source code point used for mapping. | ||||
| CdscpMapPriority | 1.3.6.1.4.1.6321.1.2.3.3.10.10.1.1.3 | INTEGER (0..7) | RW | |
column · INTEGER (0..7) · read-write · current The mapping p bits that will replace the source p bits in the incoming packet. | ||||
| TdscpPortTable | 1.3.6.1.4.1.6321.1.2.3.3.10.10.2 | NA | ||
table · not-accessible · current The table contains DSCP mapping configuration for the adsl ports. | ||||
| RdscpPortEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.10.2.1 | NA | ||
| CdscpStatusEnable | 1.3.6.1.4.1.6321.1.2.3.3.10.10.2.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The DSCP port status.
| ||||
| NvlanIsolation | 1.3.6.1.4.1.6321.1.2.3.3.10.12 | |||
| TvlanIsolationTable | 1.3.6.1.4.1.6321.1.2.3.3.10.12.1 | NA | ||
table · not-accessible · current A table contains configuration of isolated VLAN. | ||||
| RvlanIsolationEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.12.1.1 | NA | ||
| CvlanIsolationRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.12.1.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current Row status of the table used to create/delete an entry. | ||||
| NenetMtu | 1.3.6.1.4.1.6321.1.2.3.3.10.13 | |||
| SenetMtuEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.13.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the MTU size for layer 2 frame, size from 1526 to 1532, default value is 1526. | ||||
| Ntpid | 1.3.6.1.4.1.6321.1.2.3.3.10.14 | |||
| StpidEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.14.1 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current Sets TPID(Tag Protocol Identifier) of tagged frame, 0~FFFF. | ||||
| Ncfm | 1.3.6.1.4.1.6321.1.2.3.3.10.15 | |||
| TcfmLoopbackPortTable | 1.3.6.1.4.1.6321.1.2.3.3.10.15.1 | NA | ||
table · not-accessible · current A table that contains CFM information. | ||||
| RcfmLoopbackPortEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.15.1.1 | NA | ||
| CcfmLoopbackPortState | 1.3.6.1.4.1.6321.1.2.3.3.10.15.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current CFM loopback enable/disable on the port.
| ||||
| TcfmMIPTable | 1.3.6.1.4.1.6321.1.2.3.3.10.15.2 | NA | ||
| RcfmMIPEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.15.2.1 | NA | ||
| CcfmPort | 1.3.6.1.4.1.6321.1.2.3.3.10.15.2.1.3 | INTEGER | NA | |
| CcfmMIPRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.15.2.1.4 | RowStatus | RC | |
| CcfmMIPMacAddr | 1.3.6.1.4.1.6321.1.2.3.3.10.15.2.1.5 | PhysAddress | RW | |
column · PhysAddress · read-write · current CFM MIP mac address | ||||
| ScfmActionEnableStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.15.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current CFM Action enable status for the CO device
| ||||
| ScfmMode | 1.3.6.1.4.1.6321.1.2.3.3.10.15.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current CFM follow standard mode
| ||||
| ScfmLbmTimeout | 1.3.6.1.4.1.6321.1.2.3.3.10.15.5 | INTEGER (100..86400) | RW | |
scalar · INTEGER (100..86400) · read-write · current CFM LBM timeout, 100-86400 ms | ||||
| ScfmLbmDataTlvLength | 1.3.6.1.4.1.6321.1.2.3.3.10.15.6 | INTEGER (0..1400) | RW | |
scalar · INTEGER (0..1400) · read-write · current CFM LBM data tlv length, 0-1400 bytes | ||||
| TcfmLbrTable | 1.3.6.1.4.1.6321.1.2.3.3.10.15.7 | NA | ||
table · not-accessible · current A table that contains CFM LBR results. | ||||
| RcfmLbrEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.15.7.1 | NA | ||
row · not-accessible · current An entry in cfmLbrTable. | ||||
| CcfmLbmIndex | 1.3.6.1.4.1.6321.1.2.3.3.10.15.7.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current CFM lbm index. | ||||
| CcfmLbrIndex | 1.3.6.1.4.1.6321.1.2.3.3.10.15.7.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current CFM lbr index. | ||||
| CcfmLbrSrcMac | 1.3.6.1.4.1.6321.1.2.3.3.10.15.7.1.3 | PhysAddress | RO | |
column · PhysAddress · read-only · current CFM lbr source address. | ||||
| CcfmLbrStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.15.7.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current CFM lbr status.
| ||||
| CcfmLbrRtt | 1.3.6.1.4.1.6321.1.2.3.3.10.15.7.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current CFM lbr rtt in ms. | ||||
| Ndhcp | 1.3.6.1.4.1.6321.1.2.3.3.10.51 | |||
| TdhcpRelay82Table | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2 | NA | ||
table · not-accessible · current A table that contains DHCP Relay configuration. | ||||
| RdhcpRelay82Entry | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1 | NA | ||
| CdhcpRelay82PrimaryServer | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.1 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of the DHCP Relay primary server. | ||||
| CdhcpRelay82SecondaryServer | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.2 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of the DHCP Relay secondary server. | ||||
| CdhcpRelay82ActiveServer | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The current active DHCP Relay server.
| ||||
| CdhcpRelay82Enable | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable DHCP relay and Option82 function.
| ||||
| CdhcpRelay82Info | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.5 | DisplayString (SIZE (0..23)) | RC | |
column · DisplayString (SIZE (0..23)) · read-create · current User specific Option82 information. | ||||
| CdhcpRelay82RelayMode | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current DHCP relay mode.
| ||||
| CdhcpRelay82Suboption2Enable | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable Option 82 sub-option 2.
| ||||
| CdhcpRelay82Suboption2Info | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.9 | DisplayString | RC | |
column · DisplayString · read-create · current User specified information for Option 82 sub-option 2. | ||||
| CdhcpRelay82EntryEnable | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable DHCP Relay
| ||||
| CdhcpRelay82EntryOptionMode | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current Option82 format.
| ||||
| CdhcpRelay82VlanIp | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.12 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of the DHCP Relay interface for this VLAN. | ||||
| CdhcpRelay82VlanMask | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current The network mask of the DHCP Relay interface for this VLAN. | ||||
| CdhcpRelay82VlanGateway | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.14 | IpAddress | RW | |
column · IpAddress · read-write · current The gateway of the DHCP Relay interface for this VLAN. | ||||
| CdhcpRelay82ThirdServer | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.15 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of the DHCP Relay third server. | ||||
| CdhcpRelay82FourthServer | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.16 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of the DHCP Relay fourth server. | ||||
| CdhcpRelay82FifthServer | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.17 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of the DHCP Relay fifth server. | ||||
| CdhcpRelay82ServerVid | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.18 | INTEGER | RW | |
column · INTEGER · read-write · current The VID of the DHCP Relay server for this VLAN. | ||||
| NdhcpRelayTest | 1.3.6.1.4.1.6321.1.2.3.3.10.51.8 | |||
| SdhcpRelayTestVid | 1.3.6.1.4.1.6321.1.2.3.3.10.51.8.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting the VID of the test server. | ||||
| SdhcpRelayTestIp | 1.3.6.1.4.1.6321.1.2.3.3.10.51.8.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current Setting the IP of the test server. | ||||
| SdhcpRelayTestOps | 1.3.6.1.4.1.6321.1.2.3.3.10.51.8.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set the object to 1 to test DHCP server. | ||||
| SdhcpRelayTestStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.51.8.4 | DisplayString | RO | |
scalar · DisplayString · read-only · current Display testing server status. | ||||
| NdhcpRelayArp | 1.3.6.1.4.1.6321.1.2.3.3.10.51.9 | |||
| TdhcpRelayArpShowTable | 1.3.6.1.4.1.6321.1.2.3.3.10.51.9.1 | NA | ||
table · not-accessible · current The table displays DHCP ARP. | ||||
| RdhcpRelayArpShowEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.51.9.1.1 | NA | ||
row · not-accessible · current An entry of dhcpRelayArpShowTable. | ||||
| CdhcpRelayArpShowVid | 1.3.6.1.4.1.6321.1.2.3.3.10.51.9.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Display the VID of the DHCP ARP entry. | ||||
| CdhcpRelayArpShowIp | 1.3.6.1.4.1.6321.1.2.3.3.10.51.9.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current Display the IP of the DHCP ARP entry. | ||||
| CdhcpRelayArpShowMac | 1.3.6.1.4.1.6321.1.2.3.3.10.51.9.1.1.3 | PhysAddress | RO | |
column · PhysAddress · read-only · current Display the MAC of the DHCP ARP entry. | ||||
| SdhcpRelayArpFlushOps | 1.3.6.1.4.1.6321.1.2.3.3.10.51.9.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set the object to 1 to start flushing. | ||||
| Nmacfilter | 1.3.6.1.4.1.6321.1.2.3.3.10.53 | |||
| TmacFilterPortTable | 1.3.6.1.4.1.6321.1.2.3.3.10.53.1 | NA | ||
table · not-accessible · current This table includes the status of mac filtering for each port. | ||||
| RmacFilterPortEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.53.1.1 | NA | ||
| CmacFilterPortEnable | 1.3.6.1.4.1.6321.1.2.3.3.10.53.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable MAC filtering for the port.
| ||||
| CmacFilterPortMacCount | 1.3.6.1.4.1.6321.1.2.3.3.10.53.1.1.2 | INTEGER (1..128) | RW | |
column · INTEGER (1..128) · read-write · current The total number of MAC addresses allowed for the port. | ||||
| CmacFilterPortFilterMode | 1.3.6.1.4.1.6321.1.2.3.3.10.53.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The mac filter mode (accept or deny) for the port.
| ||||
| SmaxNumOfMacFiltersInSystem | 1.3.6.1.4.1.6321.1.2.3.3.10.53.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The max number of mac filters supported in the system. | ||||
| SmaxNumOfMacFiltersPerPort | 1.3.6.1.4.1.6321.1.2.3.3.10.53.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The max number of mac filters supported per port. | ||||
| ScurrNumOfMacFiltersInSystem | 1.3.6.1.4.1.6321.1.2.3.3.10.53.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current number of mac filters in the system. | ||||
| TmacFilterTable | 1.3.6.1.4.1.6321.1.2.3.3.10.53.5 | NA | ||
table · not-accessible · current A table that contains the mac filter addresses. | ||||
| RmacFilterEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.53.5.1 | NA | ||
| CmacFilterAddr | 1.3.6.1.4.1.6321.1.2.3.3.10.53.5.1.1 | PhysAddress | RO | |
column · PhysAddress · read-only · current The mac address which can pass through or be rejected from the port. | ||||
| CmacFilterRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.53.5.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of the entry. | ||||
| NmacfilterBatchSet | 1.3.6.1.4.1.6321.1.2.3.3.10.53.6 | |||
| SmacfilterTarget | 1.3.6.1.4.1.6321.1.2.3.3.10.53.6.1 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current This managed object is used for identify the target on which
the port configuration should be performed. The target is encoded as:
Byte 1: 0, Reserved(chassis)
Byte 2~3: 0, Reserved(slot)
Byte 4: 0, reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc. | ||||
| SmacfilterOps | 1.3.6.1.4.1.6321.1.2.3.3.10.53.6.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: enable mac filter BIT 2: enable mac count filter BIT 3: disable mac filter BIT 4: set mac count BIT 5: disable mac count filter. | ||||
| SmacFilterMacCountForBatchSet | 1.3.6.1.4.1.6321.1.2.3.3.10.53.6.3 | INTEGER (1..128) | RW | |
scalar · INTEGER (1..128) · read-write · current The total number of MAC addresses allowed for a port. | ||||
| TouiFilterTable | 1.3.6.1.4.1.6321.1.2.3.3.10.53.7 | NA | ||
table · not-accessible · current A table that contains the OUI filter addresses. | ||||
| RouiFilterEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.53.7.1 | NA | ||
| CouiFilterAddr | 1.3.6.1.4.1.6321.1.2.3.3.10.53.7.1.1 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The first three bytes of the mac address which can pass through or be rejected from the port. | ||||
| CouiFilterRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.53.7.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of the entry. | ||||
| SmaxNumOfOuiFiltersPerPort | 1.3.6.1.4.1.6321.1.2.3.3.10.53.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current The max number of OUI filters supported per port. | ||||
| TouiFilterPortTable | 1.3.6.1.4.1.6321.1.2.3.3.10.53.9 | NA | ||
table · not-accessible · current This table includes the status of oui filtering for each port. | ||||
| RouiFilterPortEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.53.9.1 | NA | ||
| CouiFilterPortEnable | 1.3.6.1.4.1.6321.1.2.3.3.10.53.9.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable oui filtering for the port.
| ||||
| CouiFilterPortFilterMode | 1.3.6.1.4.1.6321.1.2.3.3.10.53.9.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The oui filter mode (accept or deny) for the port.
| ||||
| NdhcpSnoop | 1.3.6.1.4.1.6321.1.2.3.3.10.55 | |||
| TdhcpSnoopPortTable | 1.3.6.1.4.1.6321.1.2.3.3.10.55.1 | NA | ||
table · not-accessible · current This table includes DHCP snooping enable/disable for each port. | ||||
| RdhcpSnoopPortEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.55.1.1 | NA | ||
| CdhcpSnoopEnable | 1.3.6.1.4.1.6321.1.2.3.3.10.55.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable DHCP snooping for a port.
| ||||
| CdhcpSnoopMaxcnt | 1.3.6.1.4.1.6321.1.2.3.3.10.55.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Set the max entries of the DHCP ARP table. | ||||
| CdhcpSnoopSmacverifyEnable | 1.3.6.1.4.1.6321.1.2.3.3.10.55.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable DHCP source MAC verify for a port.
| ||||
| SdhcpSnoopTarget | 1.3.6.1.4.1.6321.1.2.3.3.10.55.2 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current This managed object is used for identify the target on which
the operation should be performed. The target is encoded as:
Byte 1: the octet specifies a set of eight chassis, chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc. | ||||
| SdhcpSnoopOps | 1.3.6.1.4.1.6321.1.2.3.3.10.55.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current The corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: DHCP snooping table flush. | ||||
| TdhcpStaticTable | 1.3.6.1.4.1.6321.1.2.3.3.10.55.4 | NA | ||
table · not-accessible · current This table defines DHCP static IP addresses. | ||||
| RdhcpStaticEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.55.4.1 | NA | ||
| CdhcpStaticIpAddr | 1.3.6.1.4.1.6321.1.2.3.3.10.55.4.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address which can pass through the port. | ||||
| CdhcpStaticRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.55.4.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current Row status of the table entry. | ||||
| SmaxNumOfDhcpStaticIp | 1.3.6.1.4.1.6321.1.2.3.3.10.55.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of DHCP static IP addresses which can be created for a port. | ||||
| SdhcpSnoopMaxcntMode | 1.3.6.1.4.1.6321.1.2.3.3.10.55.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current When DHCP snooping table is full, new DHCP lease will replace first one in option 0 or will be dropped in option 1.
| ||||
| Nacl | 1.3.6.1.4.1.6321.1.2.3.3.10.56 | |||
| TaclSetTable | 1.3.6.1.4.1.6321.1.2.3.3.10.56.1 | NA | ||
table · not-accessible · current aclsetTable. | ||||
| RaclSetEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.56.1.1 | NA | ||
row · not-accessible · current An entry of aclSetTable.
| ||||
| CaclSetVpi | 1.3.6.1.4.1.6321.1.2.3.3.10.56.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current VPI value | ||||
| CaclSetVci | 1.3.6.1.4.1.6321.1.2.3.3.10.56.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current VCI value | ||||
| CaclSetProfileName | 1.3.6.1.4.1.6321.1.2.3.3.10.56.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current ACL Profile name | ||||
| CaclSetRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.56.1.1.4 | RowStatus | RW | |
column · RowStatus · read-write · current RowStatus of aclSetEntry | ||||
| TaclProfileTable | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2 | NA | ||
table · not-accessible · current aclProfileTable. | ||||
| RaclProfileEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1 | NA | ||
| CaclProfileRuleName | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.1 | DisplayString | RO | |
column · DisplayString · read-only · current Profile rule name | ||||
| CaclProfileRuleNumber | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The managed object is for acl profile rule configuration. etype <etype> vlan <vid> (1), etype <etype> smac <mac> (2), etype <etype> dmac <mac> (3), vlan <vid> smac <mac> (4), vlan <vid> dmac <mac> (5), smac <mac> dmac <mac> (6), vlan <vid> priority <priority> (7), etype <etype> (8), vlan <vid> (9), smac <mac> (10), dmac <mac> (11), priority <priority> (12), protocol <protocol> (13), vlan <vid> sip <ip> (14), vlan <vid> dip <ip> (15), vlan <vid> sport tcp|udp <port> (16), vlan <vid> dport tcp|udp <port> (17) | ||||
| CaclProfileActionNumber | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Profile action number. Bit 1: rate Bit 2: rvlan Bit 3: rpri Bit 4: deny Bit 1, Bit 2 & Bit 3 can multiple selection. | ||||
| CaclProfileRuleParamMask | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Profile rule parameter mask. BIT 1: srcip <ip>/<mask> BIT 2: dstip <ip>/<mask> BIT 3: tos <stos> <etos> BIT 4: srcport <sport> <eport> BIT 5: dstport <sport> <eport> | ||||
| CaclProfileRuleEtype | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.5 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current Profile rule etype | ||||
| CaclProfileRuleVid | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.6 | INTEGER (1..4094) | RW | |
column · INTEGER (1..4094) · read-write · current Profile rule vid | ||||
| CaclProfileRuleSmac | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.7 | PhysAddress | RW | |
column · PhysAddress · read-write · current Profile rule source MAC | ||||
| CaclProfileRuleDmac | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.8 | PhysAddress | RW | |
column · PhysAddress · read-write · current Profile rule destination MAC | ||||
| CaclProfileRulePriority | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.9 | INTEGER (0..7) | RW | |
column · INTEGER (0..7) · read-write · current Profile rule priority | ||||
| CaclProfileRuleProtocol | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.10 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current Profile rule protocol. icmp(1),igmp(2),ip(4),tcp(6), udp(17),gre(47),ospf(89), other ptype | ||||
| CaclProfileActionRate | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.21 | INTEGER (32..65472) | RW | |
column · INTEGER (32..65472) · read-write · current Profile action to replace to this rate | ||||
| CaclProfileActionrvlan | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.22 | INTEGER (1..4094) | RW | |
column · INTEGER (1..4094) · read-write · current Profile action to replace to this vlan | ||||
| CaclProfileActionrpri | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.23 | INTEGER (0..7) | RW | |
column · INTEGER (0..7) · read-write · current Profile action to replace to this priority | ||||
| CaclProfileRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.24 | RowStatus | RW | |
column · RowStatus · read-write · current The row status of the entry. | ||||
| CaclProfileRuleSip | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.25 | IpAddress | RC | |
column · IpAddress · read-create · current Source IP. | ||||
| CaclProfileRuleDip | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.26 | IpAddress | RC | |
column · IpAddress · read-create · current Destination IP. | ||||
| CaclProfileRuleSport | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.27 | INTEGER (0..65535) | RC | |
column · INTEGER (0..65535) · read-create · current Source port. | ||||
| CaclProfileRuleDport | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.28 | INTEGER (0..65535) | RC | |
column · INTEGER (0..65535) · read-create · current Destination port. | ||||
| NpppoeAgent | 1.3.6.1.4.1.6321.1.2.3.3.10.57 | |||
| TpppoeAgentTable | 1.3.6.1.4.1.6321.1.2.3.3.10.57.1 | NA | ||
table · not-accessible · current A table that contains PPPoE intermediate agent configuration. | ||||
| RpppoeAgentEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.57.1.1 | NA | ||
| CpppoeAgentEnable | 1.3.6.1.4.1.6321.1.2.3.3.10.57.1.1.1 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable PppoE intermediate agent function.
| ||||
| CpppoeAgentInfo | 1.3.6.1.4.1.6321.1.2.3.3.10.57.1.1.2 | DisplayString (SIZE (0..23)) | RC | |
column · DisplayString (SIZE (0..23)) · read-create · current User specific Option82 information. | ||||
| CpppoeAgentRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.57.1.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Row status of the table entry. | ||||
| CpppoeAgentOptionMode | 1.3.6.1.4.1.6321.1.2.3.3.10.57.1.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Option82 format.
| ||||
| SmaxNumOfPppoeAgentConf | 1.3.6.1.4.1.6321.1.2.3.3.10.57.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of rows that can be created in pppoeAgentTable. | ||||
| Nn1mac | 1.3.6.1.4.1.6321.1.2.3.3.10.58 | |||
| Sn1macReplaceMac | 1.3.6.1.4.1.6321.1.2.3.3.10.58.1 | MacAddress | RO | |
scalar · MacAddress · read-only · current This MAC address will be used to replace client's MAC address. | ||||
| Tn1macPortTable | 1.3.6.1.4.1.6321.1.2.3.3.10.58.2 | NA | ||
table · not-accessible · current The table contains N to 1 MAC configuration for DSL ports. | ||||
| Rn1macPortEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.58.2.1 | NA | ||
| Cn1macStatusEnable | 1.3.6.1.4.1.6321.1.2.3.3.10.58.2.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The port status of n1mac function.
| ||||
| Nmacff | 1.3.6.1.4.1.6321.1.2.3.3.10.60 | |||
| TmacFfTable | 1.3.6.1.4.1.6321.1.2.3.3.10.60.1 | NA | ||
table · not-accessible · current A table that contains MAC Force Forwarding configuration. | ||||
| RmacFfEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.60.1.1 | NA | ||
| CmacFfIndex | 1.3.6.1.4.1.6321.1.2.3.3.10.60.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Index of the MACFF. | ||||
| CmacFfVid | 1.3.6.1.4.1.6321.1.2.3.3.10.60.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The VLAN-ID refering to this AR/AS. | ||||
| CmacFfArIP | 1.3.6.1.4.1.6321.1.2.3.3.10.60.1.1.3 | IpAddress | RW | |
column · IpAddress · read-write · current IP of this AR/AS | ||||
| CmacFfSrcIP | 1.3.6.1.4.1.6321.1.2.3.3.10.60.1.1.4 | IpAddress | RW | |
column · IpAddress · read-write · current The source IP address of the MACFF. | ||||
| CmacFfSrcMask | 1.3.6.1.4.1.6321.1.2.3.3.10.60.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The subnet mask of source IP mask. | ||||
| CmacFfRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.60.1.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of the MacFfEntry entry. | ||||
| SmacFfArpFlush | 1.3.6.1.4.1.6321.1.2.3.3.10.60.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set the object to 1 to flush mac table. | ||||
| SmaxNumOfMacFfVlanInSystem | 1.3.6.1.4.1.6321.1.2.3.3.10.60.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current The max number of macff Vlans supported in the system. | ||||
| TmacFfVlanTable | 1.3.6.1.4.1.6321.1.2.3.3.10.60.5 | NA | ||
table · not-accessible · current A table that contains MAC Force Forwarding Vlan configuration. | ||||
| RmacFfVlanEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.60.5.1 | NA | ||
| CmacFfVlanRowstatus | 1.3.6.1.4.1.6321.1.2.3.3.10.60.5.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current Row status of the table used to create/delete an entry. | ||||
| TmacFfStaticIPTable | 1.3.6.1.4.1.6321.1.2.3.3.10.60.6 | NA | ||
| RmacFfStaticIPEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.60.6.1 | NA | ||
row · not-accessible · current An entry of macFfTable. | ||||
| CmacFfStaticIPPort | 1.3.6.1.4.1.6321.1.2.3.3.10.60.6.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The port number, 1 ~ 48. | ||||
| CmacFfStaticIPVid | 1.3.6.1.4.1.6321.1.2.3.3.10.60.6.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current VLAN ID of the IP range, 1 ~ 4094, the vid should be enable the MACFF function first. | ||||
| CmacFfstaticIP | 1.3.6.1.4.1.6321.1.2.3.3.10.60.6.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The specified IP range. | ||||
| CmacFfStaticIPMask | 1.3.6.1.4.1.6321.1.2.3.3.10.60.6.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Mask_bits is 24 .. 32. | ||||
| CmacFfStaticIPRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.60.6.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current The row status used to configure the table entry. | ||||
| TmacFfServerMacTable | 1.3.6.1.4.1.6321.1.2.3.3.10.60.7 | NA | ||
| RmacFfServerMacEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.60.7.1 | NA | ||
| CmacFfServerMacVid | 1.3.6.1.4.1.6321.1.2.3.3.10.60.7.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current VLAN ID of the IP range, 1 ~ 4094, the vid should be enable the MACFF function first. | ||||
| CmacFfServerMacAddr | 1.3.6.1.4.1.6321.1.2.3.3.10.60.7.1.2 | PhysAddress | RO | |
column · PhysAddress · read-only · current The mac address. | ||||
| CmacFfServerMacRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.60.7.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current The row status used to configure the table entry. | ||||
| Nsys | 1.3.6.1.4.1.6321.1.2.3.3.11 | |||
| NtimeSetup | 1.3.6.1.4.1.6321.1.2.3.3.11.4 | |||
| NdayLightSaving | 1.3.6.1.4.1.6321.1.2.3.3.11.4.7 | |||
| SdayLightSavingAdminStatus | 1.3.6.1.4.1.6321.1.2.3.3.11.4.7.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current
| ||||
| NdayLightSavingStartTime | 1.3.6.1.4.1.6321.1.2.3.3.11.4.7.2 | |||
| SdayLightSavingStartMonth | 1.3.6.1.4.1.6321.1.2.3.3.11.4.7.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current
| ||||
| SdayLightSavingStartWeek | 1.3.6.1.4.1.6321.1.2.3.3.11.4.7.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current
| ||||
| SdayLightSavingStartWday | 1.3.6.1.4.1.6321.1.2.3.3.11.4.7.2.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current
| ||||
| SdayLightSavingStartHour | 1.3.6.1.4.1.6321.1.2.3.3.11.4.7.2.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current 1: 01:00, 2: 02:00 3: 03:00 4: 04:00 5: 05:00 6: 06:00 7: 07:00 8: 08:00 9: 09:00 10: 10:00 11: 11:00 12: 12:00 13: 13:00 14: 14:00 15: 15:00 16: 16:00 17: 17:00 18: 18:00 19: 19:00 20: 20:00 21: 21:00 22: 22:00 23: 23:00
| ||||
| NdayLightSavingEndTime | 1.3.6.1.4.1.6321.1.2.3.3.11.4.7.3 | |||
| SdayLightSavingEndMonth | 1.3.6.1.4.1.6321.1.2.3.3.11.4.7.3.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current
| ||||
| SdayLightSavingEndWeek | 1.3.6.1.4.1.6321.1.2.3.3.11.4.7.3.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current
| ||||
| SdayLightSavingEndWday | 1.3.6.1.4.1.6321.1.2.3.3.11.4.7.3.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current
| ||||
| SdayLightSavingEndHour | 1.3.6.1.4.1.6321.1.2.3.3.11.4.7.3.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current 1: 01:00, 2: 02:00 3: 03:00 4: 04:00 5: 05:00 6: 06:00 7: 07:00 8: 08:00 9: 09:00 10: 10:00 11: 11:00 12: 12:00 13: 13:00 14: 14:00 15: 15:00 16: 16:00 17: 17:00 18: 18:00 19: 19:00 20: 20:00 21: 21:00 22: 22:00 23: 23:00
| ||||
| NaccessCtrl | 1.3.6.1.4.1.6321.1.2.3.3.11.5 | |||
| TsecuredClientTable | 1.3.6.1.4.1.6321.1.2.3.3.11.5.2 | NA | ||
table · not-accessible · current A table that contains information about secured clients. | ||||
| RsecuredClientEntry | 1.3.6.1.4.1.6321.1.2.3.3.11.5.2.1 | NA | ||
| CsecuredClientIndex | 1.3.6.1.4.1.6321.1.2.3.3.11.5.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The index of the entry. | ||||
| CsecuredClientStartIp | 1.3.6.1.4.1.6321.1.2.3.3.11.5.2.1.2 | IpAddress | RW | |
column · IpAddress · read-write · current The starting IP address of the secured client set. | ||||
| CsecuredClientEndIp | 1.3.6.1.4.1.6321.1.2.3.3.11.5.2.1.3 | IpAddress | RW | |
column · IpAddress · read-write · current The ending IP address of the secured client set. | ||||
| CsecuredClientService | 1.3.6.1.4.1.6321.1.2.3.3.11.5.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Each bit corresponds to a service. The bit is set to 1 if the service is enabled, and set to 0 if the service is disabled. The various bit positions are: BIT 1: telnet BIT 2: ftp BIT 3: web BIT 4: icmp BIT 5: not support BIT 6: snmp. | ||||
| CsecuredClientEnable | 1.3.6.1.4.1.6321.1.2.3.3.11.5.2.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable the entry.
| ||||
| NextAlarm | 1.3.6.1.4.1.6321.1.2.3.3.11.8 | |||
| TextAlarmTable | 1.3.6.1.4.1.6321.1.2.3.3.11.8.1 | NA | ||
table · not-accessible · current A table that contains external alarm information. | ||||
| RextAlarmEntry | 1.3.6.1.4.1.6321.1.2.3.3.11.8.1.1 | NA | ||
| CextAlarmIndex | 1.3.6.1.4.1.6321.1.2.3.3.11.8.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The index of the entry. | ||||
| CextAlarmName | 1.3.6.1.4.1.6321.1.2.3.3.11.8.1.1.2 | DisplayString (SIZE (1..31)) | RW | |
column · DisplayString (SIZE (1..31)) · read-write · current The external alarm name. | ||||
| CextAlarmStatus | 1.3.6.1.4.1.6321.1.2.3.3.11.8.1.1.3 | DisplayString (SIZE (1..31)) | RO | |
column · DisplayString (SIZE (1..31)) · read-only · current Dispaly 'Normal' or 'Alarm' string | ||||
| CextAlarmTriggeredMode | 1.3.6.1.4.1.6321.1.2.3.3.11.8.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The external alarm triggered mode.
| ||||
| Nuser | 1.3.6.1.4.1.6321.1.2.3.3.11.9 | |||
| SuserAuthMode | 1.3.6.1.4.1.6321.1.2.3.3.11.9.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current User authentication procsssing mode.
| ||||
| SuserAuthServerIp | 1.3.6.1.4.1.6321.1.2.3.3.11.9.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of the authentication server. | ||||
| SuserAuthServerPort | 1.3.6.1.4.1.6321.1.2.3.3.11.9.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current The port of the authentication server. | ||||
| SuserAuthServerSecret | 1.3.6.1.4.1.6321.1.2.3.3.11.9.4 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The secret between the authentication server and the NE for authentication process. | ||||
| TuserTable | 1.3.6.1.4.1.6321.1.2.3.3.11.9.5 | NA | ||
table · not-accessible · current A table that contains user information. | ||||
| RuserEntry | 1.3.6.1.4.1.6321.1.2.3.3.11.9.5.1 | NA | ||
| CuserName | 1.3.6.1.4.1.6321.1.2.3.3.11.9.5.1.1 | DisplayString | RO | |
column · DisplayString · read-only · current The user name. | ||||
| CuserPassword | 1.3.6.1.4.1.6321.1.2.3.3.11.9.5.1.2 | DisplayString | RC | |
column · DisplayString · read-create · current The user password. | ||||
| CuserPriviledge | 1.3.6.1.4.1.6321.1.2.3.3.11.9.5.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The user priviledge to decide what operation the user can and cannot do.
| ||||
| CuserRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.11.9.5.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The row status used to create or delete a user. | ||||
| SuserAuthDefaultPriviledge | 1.3.6.1.4.1.6321.1.2.3.3.11.9.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The user default priviledge to be assigned when radius authentication succeds but no user priviledge information(radius service-type) is provided.
| ||||
| NusbCastCtrl | 1.3.6.1.4.1.6321.1.2.3.3.11.10 | |||
| SusBcastCtrlEnable | 1.3.6.1.4.1.6321.1.2.3.3.11.10.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable upstream broadcast control.
| ||||
| SusBcastCtrlRate | 1.3.6.1.4.1.6321.1.2.3.3.11.10.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current
| ||||
| NdsQos | 1.3.6.1.4.1.6321.1.2.3.3.11.11 | |||
| SdsQosEnableMode | 1.3.6.1.4.1.6321.1.2.3.3.11.11.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable internal overriding mode to VLAN, DSCP or IP Precedence, or disable the overriding mode.
| ||||
| SdsQosDefaultPri | 1.3.6.1.4.1.6321.1.2.3.3.11.11.2 | INTEGER (0..7) | RW | |
scalar · INTEGER (0..7) · read-write · current Set the internal default p.bit after overiding. All values not configured in the overriding table are assigned to the default p.bit | ||||
| TdsQoSOverridingTable | 1.3.6.1.4.1.6321.1.2.3.3.11.11.3 | NA | ||
table · not-accessible · current This table includes downstream QoS overriding information. | ||||
| RdsQoSOverridingEntry | 1.3.6.1.4.1.6321.1.2.3.3.11.11.3.1 | NA | ||
| CdsQosPriority | 1.3.6.1.4.1.6321.1.2.3.3.11.11.3.1.1 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current Internal P.bit after overriding. | ||||
| CdsQosValueList | 1.3.6.1.4.1.6321.1.2.3.3.11.11.3.1.2 | DisplayString | RW | |
column · DisplayString · read-write · current VLAN ID, DSCP, or IP Precedence based on the internal overriding mode configured. VLAN ID 1 ~ 4094, DSCP 0 ~ 63, IP Precedence 0 ~ 7. value_list example: <1>, <1,3>, <1,5,6~10>. | ||||
| SstdioTimeout | 1.3.6.1.4.1.6321.1.2.3.3.11.12 | INTEGER (0..300) | RW | |
scalar · INTEGER (0..300) · read-write · current Set the stdio timeout, 0~300 minutes. | ||||
| SisConfigChanged | 1.3.6.1.4.1.6321.1.2.3.3.11.13 | INTEGER | RO | |
scalar · INTEGER · read-only · current If system configuration has been changed.
| ||||
| NfwUpgrade | 1.3.6.1.4.1.6321.1.2.3.3.11.14 | |||
| SfwUpgradeVersion | 1.3.6.1.4.1.6321.1.2.3.3.11.14.1 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current Configure the target firmware version that will be upgraded. | ||||
| SfwUpgradeCheck | 1.3.6.1.4.1.6321.1.2.3.3.11.14.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable firmware upgrade version checking feature.
| ||||
| SfwUpgradeStatus | 1.3.6.1.4.1.6321.1.2.3.3.11.14.3 | DisplayString | RO | |
scalar · DisplayString · read-only · current Display current firmware upgrade status. | ||||
| NdelayedReboot | 1.3.6.1.4.1.6321.1.2.3.3.11.15 | |||
| SdelayedRebootTimer | 1.3.6.1.4.1.6321.1.2.3.3.11.15.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current 5~1800 secs, 0: reboot immediately.
| ||||
| SdelayedRebootRemainingTime | 1.3.6.1.4.1.6321.1.2.3.3.11.15.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current Display the remaining time of scheduled reboot.
| ||||
| SdelayedRebootCancel | 1.3.6.1.4.1.6321.1.2.3.3.11.15.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current cancel the scheduled reboot.
| ||||
| Ntrap | 1.3.6.1.4.1.6321.1.2.3.3.12 | |||
| Nstatistics | 1.3.6.1.4.1.6321.1.2.3.3.13 | |||
| SigmpQueryCntTotal | 1.3.6.1.4.1.6321.1.2.3.3.13.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of IGMP query messages received. | ||||
| SigmpReportCntTotal | 1.3.6.1.4.1.6321.1.2.3.3.13.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of IGMP report messages received. | ||||
| SigmpLeaveCntTotal | 1.3.6.1.4.1.6321.1.2.3.3.13.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of IGMP leave messages received. | ||||
| SigmpNumOfActiveGroups | 1.3.6.1.4.1.6321.1.2.3.3.13.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current The total number of IGMP learned groups. | ||||
| TigmpGroupTable | 1.3.6.1.4.1.6321.1.2.3.3.13.5 | NA | ||
table · not-accessible · current This table includes igmp group information. | ||||
| RigmpGroupEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.5.1 | NA | ||
| CigmpGroupIp | 1.3.6.1.4.1.6321.1.2.3.3.13.5.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current igmp group IP | ||||
| CigmpGroupvid | 1.3.6.1.4.1.6321.1.2.3.3.13.5.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current vlan id | ||||
| CigmpGroupnumberOfMembers | 1.3.6.1.4.1.6321.1.2.3.3.13.5.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current number Of Members | ||||
| CigmpGroupMemberPorts | 1.3.6.1.4.1.6321.1.2.3.3.13.5.1.4 | PortList | RO | |
column · PortList · read-only · current Group Member Ports | ||||
| TigmpGroupPortTable | 1.3.6.1.4.1.6321.1.2.3.3.13.6 | NA | ||
table · not-accessible · current This table includes igmp Group port information. | ||||
| RigmpGroupPortEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.6.1 | NA | ||
row · not-accessible · current An entry in igmpGroupPortTable. | ||||
| CigmpGroupPortIp | 1.3.6.1.4.1.6321.1.2.3.3.13.6.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current Igmp Group IP | ||||
| CigmpGroupPortvid | 1.3.6.1.4.1.6321.1.2.3.3.13.6.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Igmp Group vid | ||||
| TigmpGroupV2Table | 1.3.6.1.4.1.6321.1.2.3.3.13.7 | NA | ||
table · not-accessible · current A table that displays IGMP learned group member information. | ||||
| RigmpGroupV2Entry | 1.3.6.1.4.1.6321.1.2.3.3.13.7.1 | NA | ||
| CigmpGroupV2Vid | 1.3.6.1.4.1.6321.1.2.3.3.13.7.1.1 | VlanIndex | RO | |
column · VlanIndex · read-only · current The IGMP group VLAN ID. | ||||
| CigmpGroupV2Ip | 1.3.6.1.4.1.6321.1.2.3.3.13.7.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The multicast IP address. | ||||
| CigmpGroupV2NumOfMembers | 1.3.6.1.4.1.6321.1.2.3.3.13.7.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The number of member ports in the group. | ||||
| CigmpGroupV2MemberPorts | 1.3.6.1.4.1.6321.1.2.3.3.13.7.1.4 | PortList | RO | |
column · PortList · read-only · current The member port list of the group. | ||||
| TigmpGroupPortV2Table | 1.3.6.1.4.1.6321.1.2.3.3.13.8 | NA | ||
table · not-accessible · current A table that displays IGMP joined groups in this port. | ||||
| RigmpGroupPortV2Entry | 1.3.6.1.4.1.6321.1.2.3.3.13.8.1 | NA | ||
row · not-accessible · current An entry of igmpGroupPortV2Table. | ||||
| CigmpGroupPortV2Vid | 1.3.6.1.4.1.6321.1.2.3.3.13.8.1.1 | VlanIndex | RO | |
column · VlanIndex · read-only · current The IGMP group VLAN ID. | ||||
| CigmpGroupPortV2Ip | 1.3.6.1.4.1.6321.1.2.3.3.13.8.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The multicast IP address. | ||||
| CigmpGroupPortV2SourceIp | 1.3.6.1.4.1.6321.1.2.3.3.13.8.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The source IP address that joins the IGMP group. | ||||
| TigmpPortCtrlPduTable | 1.3.6.1.4.1.6321.1.2.3.3.13.9 | NA | ||
table · not-accessible · current A table that displays IGMP related counter values in this port. | ||||
| RigmpPortCtrlPduEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.9.1 | NA | ||
| CigmpPortCtrlPduQueryCnt | 1.3.6.1.4.1.6321.1.2.3.3.13.9.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP query messages received in this port. | ||||
| CigmpPortCtrlPduReportCnt | 1.3.6.1.4.1.6321.1.2.3.3.13.9.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP report messages received in this port. | ||||
| CigmpPortCtrlPduLeaveCnt | 1.3.6.1.4.1.6321.1.2.3.3.13.9.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP leave messages received in this port. | ||||
| CigmpPortNumOfActiveGroups | 1.3.6.1.4.1.6321.1.2.3.3.13.9.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The total number of active IGMP groups in this port. | ||||
| CigmpPortCtrlAuditLeaveCnt | 1.3.6.1.4.1.6321.1.2.3.3.13.9.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of groups left by audit query. | ||||
| NdhcpStats | 1.3.6.1.4.1.6321.1.2.3.3.13.11 | |||
| TdhcpSnoopIpTable | 1.3.6.1.4.1.6321.1.2.3.3.13.11.1 | NA | ||
table · not-accessible · current This table shows the IP addresses and netmasks offered by the DHCP server. | ||||
| RdhcpSnoopIpEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.11.1.1 | NA | ||
| CdhcpSnoopIp | 1.3.6.1.4.1.6321.1.2.3.3.13.11.1.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The snooped IP address. | ||||
| CdhcpSnoopMac | 1.3.6.1.4.1.6321.1.2.3.3.13.11.1.1.2 | PhysAddress | RO | |
column · PhysAddress · read-only · current The snooped MAC address. | ||||
| CdhcpSnoopVid | 1.3.6.1.4.1.6321.1.2.3.3.13.11.1.1.3 | VlanIndex | RO | |
column · VlanIndex · read-only · current The snooped VLAN ID. | ||||
| CdhcpSnoopMask | 1.3.6.1.4.1.6321.1.2.3.3.13.11.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The snooped IP mask | ||||
| CdhcpSnoopGateway | 1.3.6.1.4.1.6321.1.2.3.3.13.11.1.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current The snooped Gateway. | ||||
| CdhcpSnoopRouteMap | 1.3.6.1.4.1.6321.1.2.3.3.13.11.1.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The refrence bit map of the dhcp route | ||||
| TdhcpSnoopCounterTable | 1.3.6.1.4.1.6321.1.2.3.3.13.11.2 | NA | ||
table · not-accessible · current This table shows the DHCP statistics. | ||||
| RdhcpSnoopCounterEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.11.2.1 | NA | ||
| CdhcpDiscovery | 1.3.6.1.4.1.6321.1.2.3.3.13.11.2.1.1 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of received DHCP server discovery packets. | ||||
| CdhcpOffer | 1.3.6.1.4.1.6321.1.2.3.3.13.11.2.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of received DHCP server offer packets. | ||||
| CdhcpRequest | 1.3.6.1.4.1.6321.1.2.3.3.13.11.2.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of received DHCP IP request packets. | ||||
| CdhcpAck | 1.3.6.1.4.1.6321.1.2.3.3.13.11.2.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of received DHCP IP acknowledge packets. | ||||
| CdhcpAckBySnoopFull | 1.3.6.1.4.1.6321.1.2.3.3.13.11.2.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of received DHCP IP acknowledge packets that replace the oldest snooping entry in snooping table due to table full. | ||||
| TdhcpRouteTable | 1.3.6.1.4.1.6321.1.2.3.3.13.11.3 | NA | ||
table · not-accessible · current A table that contains dhcp route information. | ||||
| RdhcpRouteEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.11.3.1 | NA | ||
| CdhcpRouteIndex | 1.3.6.1.4.1.6321.1.2.3.3.13.11.3.1.1 | INTEGER (1..24) | RO | |
| CdhcpRouteVid | 1.3.6.1.4.1.6321.1.2.3.3.13.11.3.1.2 | VlanIndex | RO | |
column · VlanIndex · read-only · current The VLAN-ID refering to this dhcp route. | ||||
| CdhcpRouteIP | 1.3.6.1.4.1.6321.1.2.3.3.13.11.3.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current IP of this dhcp route | ||||
| CdhcpRouteMask | 1.3.6.1.4.1.6321.1.2.3.3.13.11.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The subnet mask of source IP mask. | ||||
| CdhcpRouteGwIP | 1.3.6.1.4.1.6321.1.2.3.3.13.11.3.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current The gateway IP address. | ||||
| NpaepvcStats | 1.3.6.1.4.1.6321.1.2.3.3.13.12 | |||
| TpaepvcSessionTable | 1.3.6.1.4.1.6321.1.2.3.3.13.12.1 | NA | ||
table · not-accessible · current This table shows the paepvc session statistics. | ||||
| RpaepvcSessionEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.12.1.1 | NA | ||
row · not-accessible · current An entry of paepvcSessionTable. | ||||
| CpaepvcSessionVpi | 1.3.6.1.4.1.6321.1.2.3.3.13.12.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The PAEPVC VPI. | ||||
| CpaepvcSessionVci | 1.3.6.1.4.1.6321.1.2.3.3.13.12.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The PAEPVC VCI. | ||||
| CpaepvcSessionState | 1.3.6.1.4.1.6321.1.2.3.3.13.12.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The PAEPVC status.
| ||||
| CpaepvcSessionId | 1.3.6.1.4.1.6321.1.2.3.3.13.12.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The PAEPVC session ID. | ||||
| CpaepvcSessionUptime | 1.3.6.1.4.1.6321.1.2.3.3.13.12.1.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The PAEPVC session uptime.
| ||||
| CpaepvcSessionacname | 1.3.6.1.4.1.6321.1.2.3.3.13.12.1.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Access concentrator name. | ||||
| CpaepvcSessionsrvcname | 1.3.6.1.4.1.6321.1.2.3.3.13.12.1.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current Service name. | ||||
| TpaepvcCountTable | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2 | NA | ||
table · not-accessible · current This table shows the paepvc counters. | ||||
| RpaepvcCountEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1 | NA | ||
row · not-accessible · current An entry of paepvcCountTable.
| ||||
| CpaepvcCountVpi | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The PAEPVC VPI. | ||||
| CpaepvcCountVci | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The PAEPVC VCI. | ||||
| CpaepvcCountPppLcpCfgReqRx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of ppp lcp config-request received. | ||||
| CpaepvcCountPppLcpEchoReqRx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of ppp lcp echo-request received. | ||||
| CpaepvcCountPppLcpEchoReplyRx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of ppp lcp echo-reply received. | ||||
| CpaepvcCountPadiTx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe padi transfered | ||||
| CpaepvcCountPadoRx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe pado received | ||||
| CpaepvcCountPadrTx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe padr transfered | ||||
| CpaepvcCountPadsRx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe pads received | ||||
| CpaepvcCountPadtTx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.10 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe padt transfered | ||||
| CpaepvcCountPadtRx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe padt received | ||||
| CpaepvcCountSrvcnameErrRx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe service name error received | ||||
| CpaepvcCountAcSystemErrRx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.13 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe access concentrator name error received | ||||
| CpaepvcCountGenericErrTx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.14 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe generic error transfered | ||||
| CpaepvcCountGenericErrRx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.15 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe generic error received | ||||
| NmacStats | 1.3.6.1.4.1.6321.1.2.3.3.13.13 | |||
| SmacDisplayTarget | 1.3.6.1.4.1.6321.1.2.3.3.13.13.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This managed object is a filter used for identify the target from which the MAC addresses are learned in macTable. The target could be: 99: all ports in the system 98: all subscriber ports 97: all Ethernet ports IfIndex is used for identifying subscriber ports and Ethernet Ports(e.g. 1 ~ 50). | ||||
| TmacTable | 1.3.6.1.4.1.6321.1.2.3.3.13.13.2 | NA | ||
table · not-accessible · current A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame. | ||||
| RmacEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.13.2.1 | NA | ||
| CmacAddress | 1.3.6.1.4.1.6321.1.2.3.3.13.13.2.1.1 | MacAddress | RO | |
column · MacAddress · read-only · current A unicast MAC address for which the bridge has forwarding and/or filtering information. | ||||
| CmacPort | 1.3.6.1.4.1.6321.1.2.3.3.13.13.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The port from which the mac address has been learned. | ||||
| CmacStatus | 1.3.6.1.4.1.6321.1.2.3.3.13.13.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The status of this entry.
| ||||
| CmacVid | 1.3.6.1.4.1.6321.1.2.3.3.13.13.2.1.4 | VlanIndex | RO | |
column · VlanIndex · read-only · current The vlan id of this entry. | ||||
| Nn1macStats | 1.3.6.1.4.1.6321.1.2.3.3.13.15 | |||
| Tn1macTable | 1.3.6.1.4.1.6321.1.2.3.3.13.15.1 | NA | ||
table · not-accessible · current A table that contains information about N to 1 MAC translation, including connection type, session id/IP and MAC address. | ||||
| Rn1macEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.15.1.1 | NA | ||
| Cn1macProtoVal | 1.3.6.1.4.1.6321.1.2.3.3.13.15.1.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The protocol value of specified connection. If the connection is pppoe/pppoaoe, the value stands for session id; if the connection is ipoe/ipoaoe, the value means IP address. | ||||
| Cn1macProtoType | 1.3.6.1.4.1.6321.1.2.3.3.13.15.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Protocol type of the connection which the MAC is translated.
| ||||
| Cn1macMacAddr | 1.3.6.1.4.1.6321.1.2.3.3.13.15.1.1.3 | MacAddress | RO | |
column · MacAddress · read-only · current The translated MAC address. | ||||
| NenetStats | 1.3.6.1.4.1.6321.1.2.3.3.13.16 | |||
| SenetPrimaryPort | 1.3.6.1.4.1.6321.1.2.3.3.13.16.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current IfIndex is used for identifying the Primary Ethernet Port when dot3ad is disabled. | ||||
| TenetSfpInfoTable | 1.3.6.1.4.1.6321.1.2.3.3.13.16.2 | NA | ||
table · not-accessible · current This table includes sfp info of enet port. | ||||
| RenetSfpInfoEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.16.2.1 | NA | ||
| CenetSfpInfoTxpower | 1.3.6.1.4.1.6321.1.2.3.3.13.16.2.1.1 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Measured Tx Output Power.
| ||||
| CenetSfpInfoRxpower | 1.3.6.1.4.1.6321.1.2.3.3.13.16.2.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Measured Rx Output Power.
| ||||
| CenetSfpInfoTemperature | 1.3.6.1.4.1.6321.1.2.3.3.13.16.2.1.3 | INTEGER (-1280000..1280000) | RO | |
column · INTEGER (-1280000..1280000) · read-only · current Measured temperature.
| ||||
| CenetSfpInfoTxBias | 1.3.6.1.4.1.6321.1.2.3.3.13.16.2.1.4 | INTEGER (0..131000) | RO | |
column · INTEGER (0..131000) · read-only · current Measured tx bias.
| ||||
| CenetSfpInfoVoltage | 1.3.6.1.4.1.6321.1.2.3.3.13.16.2.1.5 | INTEGER (0..65000) | RO | |
column · INTEGER (0..65000) · read-only · current Measured voltage.
| ||||
| NvdslStats | 1.3.6.1.4.1.6321.1.2.3.3.13.17 | |||
| TvdslLineStatsTable | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2 | NA | ||
table · not-accessible · current The table displays VDSL line statistics. | ||||
| RvdslLineStatsEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1 | NA | ||
| CvdslLineStatsVtucBits1 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.1 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15. | ||||
| CvdslLineStatsVtucBits2 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15. | ||||
| CvdslLineStatsVtucBits3 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15. | ||||
| CvdslLineStatsVtucBits4 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15. | ||||
| CvdslLineStatsVturBits1 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15. | ||||
| CvdslLineStatsVturBits2 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15. | ||||
| CvdslLineStatsVturBits3 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.7 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15. | ||||
| CvdslLineStatsVturBits4 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.8 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15. | ||||
| CvdslLineStatsVtucGain1 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.9 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. | ||||
| CvdslLineStatsVtucGain2 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.10 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. | ||||
| CvdslLineStatsVtucGain3 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.11 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. | ||||
| CvdslLineStatsVtucGain4 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.12 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. | ||||
| CvdslLineStatsVtucGain5 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.13 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. | ||||
| CvdslLineStatsVtucGain6 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.14 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. | ||||
| CvdslLineStatsVtucGain7 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.15 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. | ||||
| CvdslLineStatsVtucGain8 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.16 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. | ||||
| CvdslLineStatsVturGain1 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.17 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. | ||||
| CvdslLineStatsVturGain2 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.18 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. | ||||
| CvdslLineStatsVturGain3 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.19 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. | ||||
| CvdslLineStatsVturGain4 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.20 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. | ||||
| CvdslLineStatsVturGain5 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.21 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. | ||||
| CvdslLineStatsVturGain6 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.22 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. | ||||
| CvdslLineStatsVturGain7 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.23 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. | ||||
| CvdslLineStatsVturGain8 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.24 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. | ||||
| CvdslLineStatsVtucHlog | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.25 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Hlog for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The real Hlog(f) value is represented as (6-m(i)/10), with m(i) in the range 0 to 1022. A special value m=1023 indicates that no measurement could be done for the sub-carrier group becauseit is out of the passband or that the attenuation is out of range to be represented. Each value in this array is 16 bits wide. | ||||
| CvdslLineStatsVturHlog | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.26 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Hlog for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The real Hlog(f) value is represented as (6-m(i)/10), with m(i) in the range 0 to 1022. A special value m=1023 indicates that no measurement could be done for the sub-carrier group because it is out of the passband or that the attenuation is out ofrange to be represented. Each value in this array is 16 bits wide. | ||||
| CvdslLineStatsVtucQln | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.27 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Qln for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The QLN(f) is represented as ( -23-n(i)/2), with n(i) in the range 0 to 254. A special value n(i)=255 indicates that no measurement could be done for the sub-carrier group. Each value in this array is 8 bits wide. | ||||
| CvdslLineStatsVturQln | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.28 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Qln for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The QLN(f) is represented as ( -23-n(i)/2), with n(i) in the range 0 to 254. A special value n(i)=255 indicates that no measurement could be done for the sub-carrier group. Each value in this array is 8 bits wide. | ||||
| CvdslLineStatsVtucSnr | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.29 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Snr for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. Octet i is set to a value in the range 0 to 254 (-32 + vdslLineStatsVtucSnr (i)/2) in dB (i.e., -32 to 95dB). Each value in this array is 8 bits wide. | ||||
| CvdslLineStatsVturSnr | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.30 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Snr for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. Octet i is set to a value in the range 0 to 254 (-32 + vdslLineStatsVturSnr (i)/2) in dB (i.e., -32 to 95dB). Each value in this array is 8 bits wide. | ||||
| CvdslLineStatsVtucTssi | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.31 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Tssi for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. Each value in this array is 16 bits wide. The tssi value is represented as a multiple of 1/32768 on linear scale. | ||||
| CvdslLineStatsVturTssi | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.32 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The object provides Tssi for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. Each value in this array is 16 bits wide. The tssi value is represented as a multiple of 1/32768 on linear scale. | ||||
| CvdslLineStatsProtocol | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.33 | INTEGER | RO | |
column · INTEGER · read-only · current The actual line protocol.
| ||||
| NmacffStats | 1.3.6.1.4.1.6321.1.2.3.3.13.19 | |||
| TmacFfStatsTable | 1.3.6.1.4.1.6321.1.2.3.3.13.19.1 | NA | ||
table · not-accessible · current A table that contains MAC Force Forwarding static configuration and dynamic information. | ||||
| RmacFfStatsEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.19.1.1 | NA | ||
| CmacFfStatsIndex | 1.3.6.1.4.1.6321.1.2.3.3.13.19.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Index of the MACFF. | ||||
| CmacFfStatsVid | 1.3.6.1.4.1.6321.1.2.3.3.13.19.1.1.2 | VlanIndex | RO | |
column · VlanIndex · read-only · current The VLAN-ID refering to this AR/AS. | ||||
| CmacFfStatsArIP | 1.3.6.1.4.1.6321.1.2.3.3.13.19.1.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current IP of this AR/AS | ||||
| CmacFfStatsSrcIP | 1.3.6.1.4.1.6321.1.2.3.3.13.19.1.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The source IP address of the MACFF. | ||||
| CmacFfStatsSrcMask | 1.3.6.1.4.1.6321.1.2.3.3.13.19.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The subnet mask of source IP mask. | ||||
| TmacFfArpTable | 1.3.6.1.4.1.6321.1.2.3.3.13.19.2 | NA | ||
table · not-accessible · current A table that contains MAC Force Forwarding ARP information. | ||||
| RmacFfArpEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.19.2.1 | NA | ||
| CmacFfArpVid | 1.3.6.1.4.1.6321.1.2.3.3.13.19.2.1.1 | VlanIndex | RO | |
column · VlanIndex · read-only · current The VLAN-ID refering to this AR/AS. | ||||
| CmacFfArpIP | 1.3.6.1.4.1.6321.1.2.3.3.13.19.2.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current IP of this AR/AS. | ||||
| CmacFfArpPort | 1.3.6.1.4.1.6321.1.2.3.3.13.19.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Port of this AR/AS. | ||||
| CmacFfArpMac | 1.3.6.1.4.1.6321.1.2.3.3.13.19.2.1.4 | PhysAddress | RO | |
column · PhysAddress · read-only · current MAC address of the AR or AS. | ||||
| TmacFfArpCounterTable | 1.3.6.1.4.1.6321.1.2.3.3.13.19.3 | NA | ||
table · not-accessible · current A table that contains MAC Force Forwarding ARP counter information. | ||||
| RmacFfArpCounterEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.19.3.1 | NA | ||
| CmacFfArpCounterRequestTX | 1.3.6.1.4.1.6321.1.2.3.3.13.19.3.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current ARP Request TX counter. | ||||
| CmacFfArpCounterRequestRX | 1.3.6.1.4.1.6321.1.2.3.3.13.19.3.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current ARP Request RX counter. | ||||
| CmacFfArpCounterRequestRXDrop | 1.3.6.1.4.1.6321.1.2.3.3.13.19.3.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current ARP Request RX drop counter. | ||||
| CmacFfArpCounterReplyTX | 1.3.6.1.4.1.6321.1.2.3.3.13.19.3.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current ARP Reply TX counter. | ||||
| CmacFfArpCounterReplyRX | 1.3.6.1.4.1.6321.1.2.3.3.13.19.3.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current ARP Reply RX counter. | ||||
| CmacFfArpCounterReplyRXDrop | 1.3.6.1.4.1.6321.1.2.3.3.13.19.3.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current ARP Reply RX drop counter. | ||||
| NadslStats | 1.3.6.1.4.1.6321.1.2.3.3.13.20 | |||
| TadslPortUtilTable | 1.3.6.1.4.1.6321.1.2.3.3.13.20.1 | NA | ||
table · not-accessible · current This table includes adsl port utilization. | ||||
| RadslPortUtilEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.20.1.1 | NA | ||
| CadslPortUtilTx | 1.3.6.1.4.1.6321.1.2.3.3.13.20.1.1.1 | INTEGER (0..100) | RO | |
column · INTEGER (0..100) · read-only · current Measure adsl port's tx utilization. | ||||
| CadslPortUtilRx | 1.3.6.1.4.1.6321.1.2.3.3.13.20.1.1.2 | INTEGER (0..100) | RO | |
column · INTEGER (0..100) · read-only · current Measure adsl port's rx utilization. | ||||
| CadslStatsXturInp | 1.3.6.1.4.1.6321.1.2.3.3.13.20.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current XTUR minimum INP value. | ||||
| CadslStatsXtucInp | 1.3.6.1.4.1.6321.1.2.3.3.13.20.1.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current XTUC minimum INP valu. | ||||
| Nclear | 1.3.6.1.4.1.6321.1.2.3.3.14 | |||
| ScounterClearTarget | 1.3.6.1.4.1.6321.1.2.3.3.14.1 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current This managed object is used for identify the target on which
the counter would be cleared. The target is encoded as:
Byte 1: reserved
Byte 2~3: reserved
Byte 4: reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc. | ||||
| ScounterClearOps | 1.3.6.1.4.1.6321.1.2.3.3.14.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: clear interface counters BIT 2: clear pvc packet counters BIT 3: not support BIT 4: not support BIT 5: clear DHCP counters BIT 6: clear IGMP counters BIT 7: clear IGMP port counters | ||||
| ScounterClearVpi | 1.3.6.1.4.1.6321.1.2.3.3.14.3 | INTEGER (0..255) | RW | |
scalar · INTEGER (0..255) · read-write · current VPI of the pvc whose counters would be cleared. | ||||
| ScounterClearVci | 1.3.6.1.4.1.6321.1.2.3.3.14.4 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current VCI of the pvc whose counters would be cleared. | ||||
| NaesSeriesCommon | 1.3.6.1.4.1.6321.1.2.3.3.97 | |||
| NiesSeriesCommon | 1.3.6.1.4.1.6321.1.2.3.3.98 | |||
| NaccessSwitchCommonATM | 1.3.6.1.4.1.6321.1.2.3.3.99 | |||