E5-111-MIB
Calix Networkssnmptranslate -m E5-111-MIB -Tpsnmpwalk -v2c -c <community> -m E5-111-MIB <host> 1.3.6.1.4.1.6321Imports
| BRIDGE-MIB | BridgeId, Timeout, dot1dBasePort |
|---|---|
| IF-MIB | ifIndex |
| P-BRIDGE-MIB | dot1dTrafficClass |
| Q-BRIDGE-MIB | PortList, VlanIndex, dot1qVlanIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso, private |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| NcalixNetworks | 1.3.6.1.4.1.6321 | |||
| NcalixRegistrations | 1.3.6.1.4.1.6321.1 | |||
| NcalixProducts | 1.3.6.1.4.1.6321.1.2 | |||
| Ne5x100 | 1.3.6.1.4.1.6321.1.2.3 | |||
| Ne5x111 | 1.3.6.1.4.1.6321.1.2.3.2 | |||
| Nalarmconf | 1.3.6.1.4.1.6321.1.2.3.2.2 | |||
| SalarmOps | 1.3.6.1.4.1.6321.1.2.3.2.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The manager sets the corresponding bit value to 1 to start the operation
and the agent clears the object to zero when the operation is successfully completed.
The various bit positions are:
BIT 1: clear
BIT 2: cutoff | ||||
| TalarmConfTable | 1.3.6.1.4.1.6321.1.2.3.2.2.2 | NA | ||
table · not-accessible · current This table includes alarm configuration. | ||||
| RalarmConfEntry | 1.3.6.1.4.1.6321.1.2.3.2.2.2.1 | NA | ||
| CalarmConfId | 1.3.6.1.4.1.6321.1.2.3.2.2.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current 5000:adslLine_up 5001:adslLine_down 5002:adslPerf_lol_thresh 5003:adslPerf_lof_thresh 5004:adslPerf_los_thresh 5005:adslPerf_lop_thresh 5006:adslPerf_es_thresh 5007:adslPerf_ses_thresh 5008:adslPerf_uas_thresh 5009:adslAtuc_loftrap 5010:adslAtuc_lostrap 5011:adslAtur_loftrap 5012:adslAtur_lostrap 5013:adslAtur_lprtrap 5014:ad_dhcp_rt_full 5015:ad_dhcp_dm_conflict 5016:ad_dhcp_entry_full 5017:ad_dhcp_ip_dup 5018:ad_dhcp_mac_dup 10000:eqptVol_err 10001:eqptEqpttemp_err 10002:eqptFan_err 10003:eqptHw_rtc_fail 10004:eqptHw_mon_fail 10005:eqptCold_start 10006:eqptWarm_start 10007:eqptAlm_input 10008:voip_battery_fail 10009:voip_clock_fail 10010:voip_ringer_fault 10011:eqptI2c_err 10012:eqptAlm_input2 10013:eqptAlm_input3 15000:sysReboot 15001:sysAco 15002:sysAlm_clear 15003:sysLogin_fail 15004:sysAnti_spoofing 15005:sysAlm_svrty_change 20000:enetUp 20001:enetDown 25000:voip_temp_error 25001:voip_dc_power_fail 25002:voip_ac_power_fail 25003:voip_ring_timer_fail 25004:voip_ring_rsrce_fail 25006:voip_call_setup_failed 25007:voip_call_threshold_violate | ||||
| CalarmConfFacility | 1.3.6.1.4.1.6321.1.2.3.2.2.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Alarm facility.
| ||||
| CalarmConfTarget | 1.3.6.1.4.1.6321.1.2.3.2.2.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The destination which alarms are reported to. Set the bit to 1 to enable the target. BIT 1: snmp trap BIT 2: syslog | ||||
| CalarmConfSeverity | 1.3.6.1.4.1.6321.1.2.3.2.2.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Alarm severity
| ||||
| CalarmConfClearable | 1.3.6.1.4.1.6321.1.2.3.2.2.2.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Setting the object to one indicates that the alarm is to be cleared when user submits alarm clear.
| ||||
| TalarmCurrTable | 1.3.6.1.4.1.6321.1.2.3.2.2.3 | NA | ||
table · not-accessible · current This table includes current alarm information. | ||||
| RalarmCurrEntry | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1 | NA | ||
| CalarmCurrIndex | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Index of the alarm. | ||||
| CalarmCurrOccurTime | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.2 | TimeTicks | RO | |
column · TimeTicks · read-only · current Alarm occurence time (in hundredths of a second) since the system was last re-initialized. | ||||
| CalarmCurrTrapOid | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.3 | OBJECT IDENTIFIER | RO | |
column · OBJECT IDENTIFIER · read-only · current Trap OID of the alarm. | ||||
| CalarmCurrParam1 | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The 1st parameter of the alarm. | ||||
| CalarmCurrParam2 | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The 2nd parameter of the alarm. | ||||
| CalarmCurrParam3 | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The 3rd parameter of the alarm. | ||||
| CalarmCurrParam4 | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The 4th parameter of the alarm. | ||||
| CalarmCurrParam5 | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The 5th parameter of the alarm. | ||||
| CalarmCurrParam6 | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The 6th parameter of the alarm. | ||||
| CalarmCurrParam7 | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The 7th parameter of the alarm. | ||||
| CalarmCurrParam8 | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current The 8th parameter of the alarm. | ||||
| CalarmCurrTimeDescr | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.12 | DisplayString | RO | |
column · DisplayString · read-only · current The string representation of occurence time (YYYY/MM/DD HH:MM:SS). | ||||
| CalarmCurrSeverity | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current The severity of the alarm.
| ||||
| CalarmCurrDescr | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.14 | DisplayString | RO | |
column · DisplayString · read-only · current The description of the alarm. | ||||
| TalarmSeverityPortTable | 1.3.6.1.4.1.6321.1.2.3.2.2.4 | NA | ||
table · not-accessible · current This table includes the configuration of alarm reporting severity threshold for each port. | ||||
| RalarmSeverityPortEntry | 1.3.6.1.4.1.6321.1.2.3.2.2.4.1 | NA | ||
| CseverityThresh | 1.3.6.1.4.1.6321.1.2.3.2.2.4.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The minimum alarm severity that is reported.
| ||||
| Ndiagnostic | 1.3.6.1.4.1.6321.1.2.3.2.4 | |||
| Nselt | 1.3.6.1.4.1.6321.1.2.3.2.4.3 | |||
| SseltTarget | 1.3.6.1.4.1.6321.1.2.3.2.4.3.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current IfIndex of the port which would be performed single end loopback test. | ||||
| SseltOps | 1.3.6.1.4.1.6321.1.2.3.2.4.3.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The manager sets the object to 1 to start the selt and the agent clears the object to zero when selt is successfully completed. | ||||
| SseltStatus | 1.3.6.1.4.1.6321.1.2.3.2.4.3.3 | DisplayString | RO | |
scalar · DisplayString · read-only · current Status description of the selt result. | ||||
| SseltCableType | 1.3.6.1.4.1.6321.1.2.3.2.4.3.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current The cable type that selt result indicates.
| ||||
| SseltLoopEstimateLengthFt | 1.3.6.1.4.1.6321.1.2.3.2.4.3.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current The estimated loop length that selt result indicates.
| ||||
| SseltLoopEstimateLengthMeter | 1.3.6.1.4.1.6321.1.2.3.2.4.3.6 | INTEGER | RO | |
scalar · INTEGER · read-only · current The estimated loop length that selt result indicates.
| ||||
| Nmlt | 1.3.6.1.4.1.6321.1.2.3.2.4.4 | |||
| SmltTarget | 1.3.6.1.4.1.6321.1.2.3.2.4.4.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current IfIndex of the port which would be performed Metallic Link Test. | ||||
| SmltOps | 1.3.6.1.4.1.6321.1.2.3.2.4.4.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The manager sets the object to 1 to start the mlt and the agent clears the object to zero when mlt is successfully completed. | ||||
| SmltOption | 1.3.6.1.4.1.6321.1.2.3.2.4.4.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current all : test all items vac: test AC voltage vdc: test DC voltage rload: test load resistance riso: test isolation resistance cap: test capacitor ren: test REN value ring: test ring voltage metering: test metering voltage
| ||||
| SmltForce | 1.3.6.1.4.1.6321.1.2.3.2.4.4.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Force test even the port is in use.
| ||||
| NmltResult | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5 | |||
| SmltVacTip | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current
| ||||
| SmltVacRing | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current
| ||||
| SmltVacDiff | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current
| ||||
| SmltVdcTip | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current
| ||||
| SmltVdcRing | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current
| ||||
| SmltVdcDiff | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.6 | INTEGER | RO | |
scalar · INTEGER · read-only · current
| ||||
| SmltRLoop | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current
| ||||
| SmltRtg | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current
| ||||
| SmltRrg | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current
| ||||
| SmltRtr | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.10 | INTEGER | RO | |
scalar · INTEGER · read-only · current
| ||||
| SmltCtg | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.11 | INTEGER | RO | |
scalar · INTEGER · read-only · current
| ||||
| SmltCrg | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.12 | INTEGER | RO | |
scalar · INTEGER · read-only · current
| ||||
| SmltCtr | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.13 | INTEGER | RO | |
scalar · INTEGER · read-only · current
| ||||
| SmltRen | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.14 | INTEGER | RO | |
scalar · INTEGER · read-only · current
| ||||
| SmltVRing | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.15 | INTEGER | RO | |
scalar · INTEGER · read-only · current
| ||||
| SmltVMetering | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.16 | INTEGER | RO | |
scalar · INTEGER · read-only · current
| ||||
| SmltDialToneDetected | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.17 | INTEGER | RO | |
scalar · INTEGER · read-only · current
| ||||
| SmltDetectedDtmfCount | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.18 | INTEGER | RO | |
| SmltDialToneDelay | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.19 | INTEGER | RO | |
scalar · INTEGER · read-only · current
| ||||
| TmltRelayTable | 1.3.6.1.4.1.6321.1.2.3.2.4.4.6 | NA | ||
table · not-accessible · current Perform specified MLT relay function, or turn off MLT relay function in specified subscriber. | ||||
| RmltRelayEntry | 1.3.6.1.4.1.6321.1.2.3.2.4.4.6.1 | NA | ||
| CmltRelaySet | 1.3.6.1.4.1.6321.1.2.3.2.4.4.6.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current By default, relay function is turned off.
| ||||
| Nmulticast | 1.3.6.1.4.1.6321.1.2.3.2.7 | |||
| SigmpEnable | 1.3.6.1.4.1.6321.1.2.3.2.7.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable IGMP protocol.
| ||||
| NmcastBandwidth | 1.3.6.1.4.1.6321.1.2.3.2.7.4 | |||
| SmcastDefaultBandwidth | 1.3.6.1.4.1.6321.1.2.3.2.7.4.1 | INTEGER (1..100000) | RW | |
scalar · INTEGER (1..100000) · read-write · current Default bandwidth requirement for a multicast channel.
| ||||
| SmaxNumOfMcastBw | 1.3.6.1.4.1.6321.1.2.3.2.7.4.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of row entries that user can create in mcastBwTable. | ||||
| TmcastBwTable | 1.3.6.1.4.1.6321.1.2.3.2.7.4.3 | NA | ||
table · not-accessible · current This table defines bandwidth budget for a range of multicast IP channels. | ||||
| RmcastBwEntry | 1.3.6.1.4.1.6321.1.2.3.2.7.4.3.1 | NA | ||
row · not-accessible · current An entry of mcastBwTable. | ||||
| CmcastBwIndex | 1.3.6.1.4.1.6321.1.2.3.2.7.4.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The index which specify the entry. | ||||
| CmcastBwStartIp | 1.3.6.1.4.1.6321.1.2.3.2.7.4.3.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The start multicast IP of the bandwidth control range. | ||||
| CmcastBwEndIp | 1.3.6.1.4.1.6321.1.2.3.2.7.4.3.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The end multicast IP of the bandwidth control range. | ||||
| CmcastBwBandwidth | 1.3.6.1.4.1.6321.1.2.3.2.7.4.3.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current The bandwidth budget for the multicast IP channels.
| ||||
| CmcastBwRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.7.4.3.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of the entry. | ||||
| TmcastBwPortTable | 1.3.6.1.4.1.6321.1.2.3.2.7.4.4 | NA | ||
table · not-accessible · current This table specify the multicast bandwidth control of the port. | ||||
| RmcastBwPortEntry | 1.3.6.1.4.1.6321.1.2.3.2.7.4.4.1 | NA | ||
| CmcastBwPortEnable | 1.3.6.1.4.1.6321.1.2.3.2.7.4.4.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable multicast bandwidth control for a port.
| ||||
| CmcastBwPortBandwidth | 1.3.6.1.4.1.6321.1.2.3.2.7.4.4.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Set bandwidth threshold for a port.
| ||||
| NigmpCount | 1.3.6.1.4.1.6321.1.2.3.2.7.5 | |||
| TigmpCountPortTable | 1.3.6.1.4.1.6321.1.2.3.2.7.5.1 | NA | ||
table · not-accessible · current This table specify the IGMP count limiting of the port. | ||||
| RigmpCountPortEntry | 1.3.6.1.4.1.6321.1.2.3.2.7.5.1.1 | NA | ||
| CigmpCountPortEnable | 1.3.6.1.4.1.6321.1.2.3.2.7.5.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable IGMP count limiting for a port.
| ||||
| CigmpCountPortLimit | 1.3.6.1.4.1.6321.1.2.3.2.7.5.1.1.2 | INTEGER (0..16) | RW | |
column · INTEGER (0..16) · read-write · current The maximum allowed IGMP report count for a port. | ||||
| Nmvlan | 1.3.6.1.4.1.6321.1.2.3.2.7.6 | |||
| SmaxNumOfMvlan | 1.3.6.1.4.1.6321.1.2.3.2.7.6.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of row entries that user can create in mvlanTable. | ||||
| TmvlanTable | 1.3.6.1.4.1.6321.1.2.3.2.7.6.2 | NA | ||
table · not-accessible · current A table containing static configuration information for each multicast VLAN configured into the device. | ||||
| RmvlanEntry | 1.3.6.1.4.1.6321.1.2.3.2.7.6.2.1 | NA | ||
| CmvlanIndex | 1.3.6.1.4.1.6321.1.2.3.2.7.6.2.1.1 | VlanIndex | RO | |
column · VlanIndex · read-only · current The VLAN-ID refering to this VLAN. | ||||
| CmvlanName | 1.3.6.1.4.1.6321.1.2.3.2.7.6.2.1.2 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current An administratively assigned string, which may be used to identify the VLAN. | ||||
| CmvlanEgressPorts | 1.3.6.1.4.1.6321.1.2.3.2.7.6.2.1.3 | PortList | RC | |
column · PortList · read-create · current The set of ports which are permanently assigned to the egress list for this multicast VLAN. | ||||
| CmvlanUntaggedPorts | 1.3.6.1.4.1.6321.1.2.3.2.7.6.2.1.4 | PortList | RC | |
column · PortList · read-create · current The set of ports which should transmit egress packets for this multicast VLAN as untagged. | ||||
| CmvlanRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.7.6.2.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry. | ||||
| TmvlanTranslateTable | 1.3.6.1.4.1.6321.1.2.3.2.7.6.3 | NA | ||
table · not-accessible · current A table that contains multicast to VLAN translation. | ||||
| RmvlanTranslateEntry | 1.3.6.1.4.1.6321.1.2.3.2.7.6.3.1 | NA | ||
row · not-accessible · current An entry of mvlanTranslateTable. | ||||
| CmvlanTranslateIndex | 1.3.6.1.4.1.6321.1.2.3.2.7.6.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The index which specif the entry. | ||||
| CmvlanTranslateStartIp | 1.3.6.1.4.1.6321.1.2.3.2.7.6.3.1.2 | IpAddress | RW | |
column · IpAddress · read-write · current The start IP of the multicast VLAN translation. | ||||
| CmvlanTranslateEndIp | 1.3.6.1.4.1.6321.1.2.3.2.7.6.3.1.3 | IpAddress | RW | |
column · IpAddress · read-write · current The end IP of the multicast VLAN translation. | ||||
| NqueryVid | 1.3.6.1.4.1.6321.1.2.3.2.7.7 | |||
| SmaxNumOfQryVid | 1.3.6.1.4.1.6321.1.2.3.2.7.7.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of row entries that user can create in qryVidConfTable. | ||||
| TqryVidConfTable | 1.3.6.1.4.1.6321.1.2.3.2.7.7.2 | NA | ||
table · not-accessible · current This table defines statically set VLANs used for response IGMP report. | ||||
| RqryVidConfEntry | 1.3.6.1.4.1.6321.1.2.3.2.7.7.2.1 | NA | ||
| CqryVid | 1.3.6.1.4.1.6321.1.2.3.2.7.7.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current VLAN ID. | ||||
| CqryVidRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.7.7.2.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry. | ||||
| TqryVidStatusTable | 1.3.6.1.4.1.6321.1.2.3.2.7.7.3 | NA | ||
table · not-accessible · current This table shows statically set or dynamically learned VLANs used for response IGMP report. | ||||
| RqryVidStatusEntry | 1.3.6.1.4.1.6321.1.2.3.2.7.7.3.1 | NA | ||
| CqryVidType | 1.3.6.1.4.1.6321.1.2.3.2.7.7.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current VLAN type.
| ||||
| SigmpVersion | 1.3.6.1.4.1.6321.1.2.3.2.7.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting IGMP version.
| ||||
| SigmpLeaveMode | 1.3.6.1.4.1.6321.1.2.3.2.7.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Configure IGMP leave message handling mode.
| ||||
| NigmpTimer | 1.3.6.1.4.1.6321.1.2.3.2.7.11 | |||
| SigmpQryInterval | 1.3.6.1.4.1.6321.1.2.3.2.7.11.1 | INTEGER (10..1000) | RW | |
scalar · INTEGER (10..1000) · read-write · current Set IGMP query interval, 10~1000 in seconds. | ||||
| SigmpRobust | 1.3.6.1.4.1.6321.1.2.3.2.7.11.2 | INTEGER (1..5) | RW | |
scalar · INTEGER (1..5) · read-write · current Set IGMP query Robustness, 1~5. | ||||
| SigmpQryRespInterval | 1.3.6.1.4.1.6321.1.2.3.2.7.11.3 | INTEGER (1..100) | RW | |
scalar · INTEGER (1..100) · read-write · current Set IGMP query response interval, 1~100 in 100 milliseconds. | ||||
| SigmpLastMemQryInterval | 1.3.6.1.4.1.6321.1.2.3.2.7.11.4 | INTEGER (1..5) | RW | |
scalar · INTEGER (1..5) · read-write · current Set IGMP Last Member Query interval, 1~5 in 100 milliseconds. | ||||
| SigmpLastMemQryRobust | 1.3.6.1.4.1.6321.1.2.3.2.7.11.5 | INTEGER (1..5) | RW | |
scalar · INTEGER (1..5) · read-write · current Set Last Member Query Robustness, 1~5. | ||||
| NauditQuery | 1.3.6.1.4.1.6321.1.2.3.2.7.12 | |||
| SauditQryEnable | 1.3.6.1.4.1.6321.1.2.3.2.7.12.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable IGMP audit query.
| ||||
| SauditQryInterval | 1.3.6.1.4.1.6321.1.2.3.2.7.12.2 | INTEGER (1..4) | RW | |
scalar · INTEGER (1..4) · read-write · current Set IGMP Audit Query Interval, 1~4 in 100 milliseconds. | ||||
| SauditQryRobust | 1.3.6.1.4.1.6321.1.2.3.2.7.12.3 | INTEGER (1..5) | RW | |
scalar · INTEGER (1..5) · read-write · current Set IGMP Audit Query Robustness, 1~5. | ||||
| NigmpProfile | 1.3.6.1.4.1.6321.1.2.3.2.7.13 | |||
| SmaxNumberOfIgmpProfiles | 1.3.6.1.4.1.6321.1.2.3.2.7.13.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The max number of IGMP profiles in the system. | ||||
| TigmpProfileTable | 1.3.6.1.4.1.6321.1.2.3.2.7.13.2 | NA | ||
table · not-accessible · current A table that contains IGMP Profiles. | ||||
| RigmpProfileEntry | 1.3.6.1.4.1.6321.1.2.3.2.7.13.2.1 | NA | ||
| CigmpProfileName | 1.3.6.1.4.1.6321.1.2.3.2.7.13.2.1.1 | DisplayString (SIZE (1..31)) | RO | |
column · DisplayString (SIZE (1..31)) · read-only · current The IGMP Profile name. | ||||
| CigmpProfileEnable | 1.3.6.1.4.1.6321.1.2.3.2.7.13.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable IGMP Profile.
| ||||
| CigmpProfileMaxGroup | 1.3.6.1.4.1.6321.1.2.3.2.7.13.2.1.3 | INTEGER (1..64) | RW | |
column · INTEGER (1..64) · read-write · current Set maximum allowed multicast group, 1~64. | ||||
| CigmpProfileRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.7.13.2.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of the IGMP Profile entry. | ||||
| TigmpFilterTable | 1.3.6.1.4.1.6321.1.2.3.2.7.13.3 | NA | ||
table · not-accessible · current A table that contains IGMP Filters. | ||||
| RigmpFilterEntry | 1.3.6.1.4.1.6321.1.2.3.2.7.13.3.1 | NA | ||
| CigmpFilterIndex | 1.3.6.1.4.1.6321.1.2.3.2.7.13.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The index which specifies the filter rule. | ||||
| CigmpFilterStartIp | 1.3.6.1.4.1.6321.1.2.3.2.7.13.3.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The start IP of the filter rule. | ||||
| CigmpFilterEndIp | 1.3.6.1.4.1.6321.1.2.3.2.7.13.3.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The end IP of the filter rule. | ||||
| TigmpProfilePortTable | 1.3.6.1.4.1.6321.1.2.3.2.7.13.4 | NA | ||
table · not-accessible · current This table specifies the IGMP Profile of the port. | ||||
| RigmpProfilePortEntry | 1.3.6.1.4.1.6321.1.2.3.2.7.13.4.1 | NA | ||
| CigmpProfilePortProfile | 1.3.6.1.4.1.6321.1.2.3.2.7.13.4.1.1 | OCTET STRING (SIZE (1..31)) | RW | |
column · OCTET STRING (SIZE (1..31)) · read-write · current The IGMP Profile of the port. | ||||
| Nport | 1.3.6.1.4.1.6321.1.2.3.2.8 | |||
| TsubrPortTable | 1.3.6.1.4.1.6321.1.2.3.2.8.1 | NA | ||
table · not-accessible · current This table includes subscriber attributes for the port. | ||||
| RsubrPortEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.1.1 | NA | ||
| CsubrPortName | 1.3.6.1.4.1.6321.1.2.3.2.8.1.1.1 | DisplayString (SIZE (0..31)) | RW | |
column · DisplayString (SIZE (0..31)) · read-write · current Name of the subscriber. | ||||
| CsubrPortTel | 1.3.6.1.4.1.6321.1.2.3.2.8.1.1.2 | DisplayString (SIZE (0..15)) | RW | |
column · DisplayString (SIZE (0..15)) · read-write · current Telephone number of the subscriber. | ||||
| NadslPort | 1.3.6.1.4.1.6321.1.2.3.2.8.2 | |||
| TadslLineConfTable | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1 | NA | ||
table · not-accessible · current This table includes common attributes describing the ADSL line. | ||||
| RadslLineConfEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1 | NA | ||
| CadslLineConfAdslMode | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current G.lite and T1.413 are only applicable to annex A board. ETSI is only applicable to annex B board.
| ||||
| CadslLineConfAnnexL | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable annex L for the port(Only in AnnexA).
| ||||
| CadslLineConfAnnexM | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable annex M for the port(For BCM AnnexA solution).
| ||||
| CadslLineConfAnnexI | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable annex I for the port(For BCM AnnexA solution).
| ||||
| CadslLineConfOptionMask | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The semantic for each bit is: BIT 1 : Disable Trellis BIT 2 : Disable Reed-Solomon BIT 3 : Disable upstream bitswap BIT 4 : Disable downstream bitswap BIT 5 : Disable 1-bit constellation BIT 6 : Disable transmit windowing BIT 7 : Disable s=0.5 support (ADSL1 only) BIT 8 : Disable G.lite rate limit (ADSL1 only) BIT 9 : Enable Nitro BIT 10: Enable US PHYR BIT 11: ENABLE DS PHYR | ||||
| CadslLineConfPowerMgmt | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable power management for the port.
| ||||
| CadslLineConfPowerMode | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current The power mode of the ADSL line.
| ||||
| CadslLineConfAturMaxTxPower | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.8 | INTEGER (-130..200) | RW | |
column · INTEGER (-130..200) · read-write · current The maximum allowed transmit power of ATU-R.
| ||||
| CadslLineConfAtucMaxTxPower | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.9 | INTEGER (-50..200) | RW | |
column · INTEGER (-50..200) · read-write · current The maximum allowed transmit power of ATU-C.
| ||||
| CadslLineConfMaxRxPower | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.10 | INTEGER (-255..255) | RW | |
column · INTEGER (-255..255) · read-write · current The maximum aggregate received power.
| ||||
| CadslLineConfAturCarrierMask | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.11 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current The upstream carrier mask. For CTLM AnnexA solution, bin is from 0 to 31;
CTLM AnnexB solution, bin is from 0 to 63; BCM solution, bin is from 0 to 63.
Bit set to 1 indicates the bin is masked off. | ||||
| CadslLineConfAtucCarrierMask0 | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.12 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current The downstream carrier mask. For CTLM AnnexA solution, bin is from 32 to 255; CTLM AnnexB solution, bin is from 64 to 255; BCM solution, bin is from 32 to 255. Bit set to 1 indicates the bin is masked off. | ||||
| CadslLineConfAtucCarrierMask1 | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.13 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current The downstream carrier mask from bin 256 to 511. Bit set to 1 indicates the bin is masked off. | ||||
| CadslLineConfAturInp | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current The upstream Impulse Noise Protection minimum setting in unit of DMT symbol. For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can set value from 1 ~ 7.
| ||||
| CadslLineConfAtucInp | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current The downstream Impulse Noise Protection minimum setting in unit of DMT symbol. For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can set value from 1 ~ 7.
| ||||
| CadslLineConfL0Time | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current Set the minimum time in seconds that the ADSL line
must stay in L0 power mode before changing to the L2 power mode.
For CTLM solution, the range is 120 ~ 65535;
for BCM solution, the range is 10 ~ 65535. | ||||
| CadslLineConfL2Time | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.17 | INTEGER | RW | |
column · INTEGER · read-write · current Set minimum time in seconds that the ADSL line must stay in the
L2 power mode before reducing the power again in the L2 power mode.
For CTLM solution, the range is 60 ~ 65535;
for BCM solution, the range is 10 ~ 65535. | ||||
| CadslLineConfL2ATPR | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.18 | INTEGER | RW | |
column · INTEGER · read-write · current Set the maximum Aggregate Transmit Power Reduction (ATPR)
in decibels (dB) that is permitted in a L2 power reduction.
The system can gradually decrease the ADSL line transmission power
while it is in the L2 power mode. This is the largest individual
power reduction allowed in the L2 power mode.
For CTLM solution, the range is 1 ~ 5(dB);
for BCM solution, the range is 0 ~ 15(dB).
| ||||
| CadslLineConfL2ATPRT | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.19 | INTEGER | RW | |
column · INTEGER · read-write · current the maximum Aggregate Transmit Power Reduction Total (ATPRT)
in decibels (dB) that is permitted in the L2 power mode.
This is the total transmit power decrease that is allowed
to occur in the L2 power mode.
For CTLM solution, the range is 1 ~ 40(dB);
for BCM solution, the range is 0 ~ 15(dB).
| ||||
| CadslLineConfMaxL2Rate | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.20 | INTEGER | RW | |
column · INTEGER · read-write · current configured maximum L2 rate. (32~4096 Kbps, 4 Kbps resolution. For CTLM solution, 0 for system assign; for BCM solution, default:4096.)
| ||||
| CadslLineConfMinL2Rate | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.21 | INTEGER | RW | |
column · INTEGER · read-write · current configured minimum L2 rate. (32~4096 Kbps, 4 Kbps resolution, For CTLM solution, 0 for system assign; for BCM solution, default:32.)
| ||||
| CadslLineConfL0toL2Rate | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.22 | INTEGER | RW | |
column · INTEGER · read-write · current configured transition L0 to L2 rate. (<=min_l2rate/2 and >= 16 Kbps, For CTLM solution, 0 for system assign; for BCM solution, default:16.)
| ||||
| CadslLineConfNitro | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.23 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable nitro mode for the port(For BCM solution).
| ||||
| CadslLineConfUSPhyr | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.24 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable Upstream PHYR for the port(For BCM solution).
| ||||
| CadslLineConfDSPhyr | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.25 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable Downstream PHYR for the port(For BCM solution).
| ||||
| NadslPortBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3 | |||
| SadslPortTarget | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.1 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The managed object is used for identify the target on which
the port configuration should be performed. The target is encoded as:
Byte 1: 0, Reserved(chaises)
Byte 2~3: 0,0 Reserved(slot)
Byte 4: 0, reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc. | ||||
| SadslPortOps | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The managed object is for ADSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the corresponding bit value to be 1. The various bit positions are: BIT 1: enable port BIT 2: disable port BIT 3: set ADSL mode BIT 4: set line profile BIT 5: set alarm profile BIT 6: enable Annex L to be narrow mode(Only in AnnexA) BIT 7: enable Annex L to be wide mode(Only in AnnexA) BIT 8: disable Annex L(Only in AnnexA) BIT 9: enable Annex M (For BCM AnnexA solution) BIT 10: disable Annex M (For BCM AnnexA solution) BIT 11: enable Annex I (For BCM AnnexA solution) BIT 12: disable Annex I (For BCM AnnexA solution) BIT 13: set option mask BIT 14: enable power management mode to be L2 BIT 15: enable power management mode to be L2 BIT 16: disable power management mode BIT 17: set power mode to be fixed BIT 18: set power mode to be priority to power BIT 19: set power mode to be priority to rate BIT 20: set ATU-R max Tx power BIT 21: set ATU-C max Tx power BIT 22: set max Rx power BIT 23: set ATU-R carrier mask BIT 24: set ATU-C carrier mask BIT 25: set ATU-R INP minimum setting BIT 26: set ATU-C INP minimum setting | ||||
| SadslPortOps2 | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current The managed object is for ADSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the corresponding bit value to be 1. The various bit positions are: BIT 1: set L0 Time BIT 2: set L2 Time BIT 3: set L2 ATPR BIT 4: set L2 ATPRT BIT 5: set maximum L2 rate BIT 6: set minimum L2 rate BIT 7: set transition L0 to L2 rate | ||||
| SadslModeForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current G.lite and T1.413 are only applicable to annex A board. ETSI is only applicable to annex B board.
| ||||
| SadslLineProfileForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.5 | DisplayString (SIZE (1..31)) | RW | |
scalar · DisplayString (SIZE (1..31)) · read-write · current The ADSL line profile. | ||||
| SadslAlarmProfileForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.6 | DisplayString (SIZE (1..31)) | RW | |
scalar · DisplayString (SIZE (1..31)) · read-write · current The ADSL alarm profile. | ||||
| SadslOptionMaskForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current The semantic for each bit is identical to the object adslLineConfOptionMask. | ||||
| SadslAturMaxTxPowerForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.8 | INTEGER (-130..200) | RW | |
scalar · INTEGER (-130..200) · read-write · current The maximum allowed transmit power of ATU-R.
| ||||
| SadslAtucMaxTxPowerForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.9 | INTEGER (-50..200) | RW | |
scalar · INTEGER (-50..200) · read-write · current The maximum allowed transmit power of ATU-C.
| ||||
| SadslMaxRxPowerForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.10 | INTEGER (-255..255) | RW | |
scalar · INTEGER (-255..255) · read-write · current The maximum aggregate received power.
| ||||
| SadslAturCarrierMaskForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.11 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The upstream carrier mask.For CTLM AnnexA solution, bin is from 0 to 31;
CTLM AnnexB solution, bin is from 0 to 63; BCM solution, bin is from 0 to 63.
Bit set to 1 indicates the bin is masked off. | ||||
| SadslAtucCarrierMask0ForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.12 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The downstream carrier mask from bin 32 to 255. Bit set to 1 indicates the bin is masked off. | ||||
| SadslAtucCarrierMask1ForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.13 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The downstream carrier mask from bin 256 to 511. Bit set to 1 indicates the bin is masked off. | ||||
| SadslAturInpForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current The upstream Impulse Noise Protection minimum setting in unit of DMT symbol. For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can set value from 1 ~ 7.
| ||||
| SadslAtucInpForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.15 | INTEGER | RW | |
scalar · INTEGER · read-write · current The downstream Impulse Noise Protection minimum setting in unit of DMT symbol. For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can set value from 1 ~ 7.
| ||||
| SadslL0TimeForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set the minimum time in seconds that the ADSL line must stay in L0 power mode before changing to the L2 power mode. For CTLM solution, the range is 120 ~ 65535; for BCM solution, the range is 10 ~ 65535. | ||||
| SadslL2TimeForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.17 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set minimum time in seconds that the ADSL line must stay in the L2 power mode before reducing the power again in the L2 power mode. For CTLM solution, the range is 60 ~ 65535; for BCM solution, the range is 10 ~ 65535. | ||||
| SadslL2ATPRForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.18 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set the maximum Aggregate Transmit Power Reduction (ATPR) in decibels (dB) that is permitted in a L2 power reduction. The system can gradually decrease the ADSL line transmission power while it is in the L2 power mode. This is the largest individual power reduction allowed in the L2 power mode. For CTLM solution, the range is 1 ~ 5(dB); for BCM solution, the range is 0 ~ 15(dB).
| ||||
| SadslL2ATPRTForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.19 | INTEGER | RW | |
scalar · INTEGER · read-write · current the maximum Aggregate Transmit Power Reduction Total (ATPRT) in decibels (dB) that is permitted in the L2 power mode. This is the total transmit power decrease that is allowed to occur in the L2 power mode. For CTLM solution, the range is 1 ~ 40(dB); for BCM solution, the range is 0 ~ 15(dB).
| ||||
| SadslMaxL2RateForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.20 | INTEGER | RW | |
scalar · INTEGER · read-write · current configured maximum L2 rate. (32~4096 Kbps, 4 Kbps resolution. For CTLM solution, 0 for system assign; for BCM solution, default:4096.)
| ||||
| SadslMinL2RateForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.21 | INTEGER | RW | |
scalar · INTEGER · read-write · current configured minimum L2 rate. (32~4096 Kbps, 4 Kbps resolution, For CTLM solution, 0 for system assign; for BCM solution, default:32.)
| ||||
| SadslL0toL2RateForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.22 | INTEGER | RW | |
scalar · INTEGER · read-write · current configured transition L0 to L2 rate. (<=min_l2rate/2 and >= 16 Kbps, For CTLM solution, 0 for system assign; for BCM solution, default:16.)
| ||||
| TadslLineStatusTable | 1.3.6.1.4.1.6321.1.2.3.2.8.2.4 | NA | ||
table · not-accessible · current This table includes the ADSL line status. | ||||
| RadslLineStatusEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.2.4.1 | NA | ||
| CadslLineStatusMode | 1.3.6.1.4.1.6321.1.2.3.2.8.2.4.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The link up mode of the ADSL line.
| ||||
| CadslLineUpTime | 1.3.6.1.4.1.6321.1.2.3.2.8.2.4.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The link up time of the ADSL line, in unit of seconds | ||||
| TpowerMgmtParamTable | 1.3.6.1.4.1.6321.1.2.3.2.8.2.5 | NA | ||
table · not-accessible · current This table defines L0 to L2 power transition parameters. | ||||
| RpowerMgmtParamEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.2.5.1 | NA | ||
| CpowerMgmtL0Time | 1.3.6.1.4.1.6321.1.2.3.2.8.2.5.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The object specifies the minimum time in L0 mode before L2 mode may be entered.
| ||||
| CpowerMgmtL2Time | 1.3.6.1.4.1.6321.1.2.3.2.8.2.5.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The object specifies the minimum time in L2 mode before trimming and in between power trims.
| ||||
| CpowerMgmtL2Atpr | 1.3.6.1.4.1.6321.1.2.3.2.8.2.5.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The maximum Aggregate Transmit Power Reduction.
| ||||
| CpowerMgmtL2Atprt | 1.3.6.1.4.1.6321.1.2.3.2.8.2.5.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The maximum Aggregate Transmit Power Reduction Total.
| ||||
| CpowerMgmtL2MinRate | 1.3.6.1.4.1.6321.1.2.3.2.8.2.5.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The object specifies the minimum L2 rate.
| ||||
| CpowerMgmtL2MaxRate | 1.3.6.1.4.1.6321.1.2.3.2.8.2.5.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The object specifies the maximum L2 rate.
| ||||
| CpowerMgmtL2ThreshRate | 1.3.6.1.4.1.6321.1.2.3.2.8.2.5.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current The object specifies the rate threshold that triggers the line entering L0 or L2 mode.
| ||||
| TpowerMgmtPSDTable | 1.3.6.1.4.1.6321.1.2.3.2.8.2.6 | NA | ||
table · not-accessible · current This table provides the PSD setting for both ATU-C and ATU-R. | ||||
| RpowerMgmtPSDEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.2.6.1 | NA | ||
| CpowerMgmtAtucMaxPSD | 1.3.6.1.4.1.6321.1.2.3.2.8.2.6.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The object specifies the maximum ATU-C PSD.
| ||||
| CpowerMgmtAturMaxPSD | 1.3.6.1.4.1.6321.1.2.3.2.8.2.6.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The object specifies the maximum ATU-R PSD.
| ||||
| Npvc | 1.3.6.1.4.1.6321.1.2.3.2.8.4 | |||
| SmaxNumOfPvcs | 1.3.6.1.4.1.6321.1.2.3.2.8.4.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of PVCs which could be created on a port. | ||||
| TpvcTable | 1.3.6.1.4.1.6321.1.2.3.2.8.4.2 | NA | ||
table · not-accessible · current This table includes PVC configuration. | ||||
| RpvcEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1 | NA | ||
| CpvcVpi | 1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the pvc. | ||||
| CpvcVci | 1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VCI of the pvc. | ||||
| CpvcPvid | 1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.3 | VlanIndex | RO | |
column · VlanIndex · read-only · current Default VID of the pvc. | ||||
| CpvcPriority | 1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.5 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current 802.1p default priority of the pvc. | ||||
| CpvcProfileDS | 1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.6 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side. | ||||
| CpvcRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| CpvcProfileUS | 1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.8 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side. | ||||
| CpvcAcName | 1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.11 | DisplayString | RC | |
column · DisplayString · read-create · current Access concentrator name for paepvc. | ||||
| CpvcServiceName | 1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.12 | DisplayString | RC | |
column · DisplayString · read-create · current Service name for paepvc. | ||||
| CpvcHelloTime | 1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.13 | INTEGER | RC | |
column · INTEGER · read-create · current The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.
| ||||
| TpvcStateTable | 1.3.6.1.4.1.6321.1.2.3.2.8.4.3 | NA | ||
table · not-accessible · current This table show current PVC status. | ||||
| RpvcStateEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.4.3.1 | NA | ||
row · not-accessible · current An entry in pvcStateTable.
| ||||
| CpvcStateVpi | 1.3.6.1.4.1.6321.1.2.3.2.8.4.3.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the pvc. | ||||
| CpvcStateVci | 1.3.6.1.4.1.6321.1.2.3.2.8.4.3.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VCI of the pvc. | ||||
| CpvcStatePvid | 1.3.6.1.4.1.6321.1.2.3.2.8.4.3.1.3 | VlanIndex | RO | |
column · VlanIndex · read-only · current Default VID of the pvc. | ||||
| CpvcStatePriority | 1.3.6.1.4.1.6321.1.2.3.2.8.4.3.1.4 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current 802.1p default priority of the pvc. | ||||
| CpvcStateChannelType | 1.3.6.1.4.1.6321.1.2.3.2.8.4.3.1.8 | DisplayString (SIZE (1..31)) | RO | |
column · DisplayString (SIZE (1..31)) · read-only · current The value of this object identifies the channel type at runtime. | ||||
| CpvcStateEncap | 1.3.6.1.4.1.6321.1.2.3.2.8.4.3.1.9 | DisplayString (SIZE (1..31)) | RO | |
column · DisplayString (SIZE (1..31)) · read-only · current The value of this object identifies the channel encapsulation at runtime. | ||||
| TpvcUsRateLimitTable | 1.3.6.1.4.1.6321.1.2.3.2.8.4.4 | NA | ||
table · not-accessible · current This table defines the upstream rate limit for each PVC. | ||||
| RpvcUsRateLimitEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.4.4.1 | NA | ||
| CpvcUsRateLimitEnable | 1.3.6.1.4.1.6321.1.2.3.2.8.4.4.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable upstream rate limit for a PVC.
| ||||
| CpvcUsRateLimit | 1.3.6.1.4.1.6321.1.2.3.2.8.4.4.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Upstream rate limit in Kbps for a PVC.
| ||||
| Nppvc | 1.3.6.1.4.1.6321.1.2.3.2.8.5 | |||
| SmaxNumOfPriorityPvcs | 1.3.6.1.4.1.6321.1.2.3.2.8.5.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of priority PVCs which could be created on a port. | ||||
| TppvcTable | 1.3.6.1.4.1.6321.1.2.3.2.8.5.2 | NA | ||
table · not-accessible · current This table includes priority PVC configuration. | ||||
| RppvcEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.5.2.1 | NA | ||
| CppvcVpi | 1.3.6.1.4.1.6321.1.2.3.2.8.5.2.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the ppvc. | ||||
| CppvcVci | 1.3.6.1.4.1.6321.1.2.3.2.8.5.2.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VCI of the ppvc. | ||||
| CppvcPvid | 1.3.6.1.4.1.6321.1.2.3.2.8.5.2.1.3 | VlanIndex | RO | |
column · VlanIndex · read-only · current Default VID of the ppvc. | ||||
| CppvcEncap | 1.3.6.1.4.1.6321.1.2.3.2.8.5.2.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Encapsulation of the ppvc.
| ||||
| CppvcPriority | 1.3.6.1.4.1.6321.1.2.3.2.8.5.2.1.5 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current 802.1p default priority of the ppvc. | ||||
| CppvcRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.5.2.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| TppvcMemberTable | 1.3.6.1.4.1.6321.1.2.3.2.8.5.4 | NA | ||
table · not-accessible · current This table includes priority PVC member configuration. | ||||
| RppvcMemberEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.5.4.1 | NA | ||
row · not-accessible · current An entry in ppvcMemberTable. | ||||
| CppvcMemberVpi | 1.3.6.1.4.1.6321.1.2.3.2.8.5.4.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the member ppvc. | ||||
| CppvcMemberVci | 1.3.6.1.4.1.6321.1.2.3.2.8.5.4.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VCI of the member ppvc. | ||||
| CppvcMemberPriority | 1.3.6.1.4.1.6321.1.2.3.2.8.5.4.1.3 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current 802.1p default priority of the member ppvc. | ||||
| CppvcMemberProfileDS | 1.3.6.1.4.1.6321.1.2.3.2.8.5.4.1.4 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The profile of the member ppvc in DS side. | ||||
| CppvcMemberRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.5.4.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| CppvcMemberProfileUS | 1.3.6.1.4.1.6321.1.2.3.2.8.5.4.1.6 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The profile of the member ppvc in US side. | ||||
| Nrpvc | 1.3.6.1.4.1.6321.1.2.3.2.8.8 | |||
| TrpvcGatewayTable | 1.3.6.1.4.1.6321.1.2.3.2.8.8.1 | NA | ||
table · not-accessible · current This table includes Routed Gateway configuration. | ||||
| RrpvcGatewayEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.8.1.1 | NA | ||
| CrpvcGatewayIp | 1.3.6.1.4.1.6321.1.2.3.2.8.8.1.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current IP of RPVC gateway. | ||||
| CrpvcGatewayVlanId | 1.3.6.1.4.1.6321.1.2.3.2.8.8.1.1.2 | VlanIndex | RW | |
column · VlanIndex · read-write · current Vlan id send to this RPVC gateway. | ||||
| CrpvcGatewayRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.8.1.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| CrpvcGatewayPriority | 1.3.6.1.4.1.6321.1.2.3.2.8.8.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current 802.1p p bit send to this RPVC gateway. | ||||
| TrpvcTable | 1.3.6.1.4.1.6321.1.2.3.2.8.8.2 | NA | ||
table · not-accessible · current This table includes RPVC configuration. | ||||
| RrpvcEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1 | NA | ||
row · not-accessible · current An entry in rpvcTable.
| ||||
| CrpvcVpi | 1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the rpvc. | ||||
| CrpvcVci | 1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VCI of the rpvc. | ||||
| CrpvcDSProfile | 1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1.3 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The down stream profile of the rpvc. | ||||
| CrpvcUSProfile | 1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1.4 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The up stream profile of the rpvc. | ||||
| CrpvcIp | 1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current The IP of the rpvc. | ||||
| CrpvcNetmask | 1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1.6 | IpAddress | RO | |
column · IpAddress · read-only · current The IP mask of the rpvc IP. | ||||
| CrpvcGatewayIpAddress | 1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1.7 | IpAddress | RC | |
column · IpAddress · read-create · current The gateway IP of rpvc. | ||||
| CrpvcRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| TrpvcRouteDomainTable | 1.3.6.1.4.1.6321.1.2.3.2.8.8.3 | NA | ||
table · not-accessible · current This table includes RPVC route domain configuration. | ||||
| RrpvcRouteDomainEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.8.3.1 | NA | ||
row · not-accessible · current An entry in rpvcRouteDomainTable. | ||||
| CrpvcRouteDomainVpi | 1.3.6.1.4.1.6321.1.2.3.2.8.8.3.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the rpvc. | ||||
| CrpvcRouteDomainVci | 1.3.6.1.4.1.6321.1.2.3.2.8.8.3.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VCI of the rpvc. | ||||
| CrpvcRouteDomainIp | 1.3.6.1.4.1.6321.1.2.3.2.8.8.3.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The route domain IP. | ||||
| CrpvcRouteDomainNetmask | 1.3.6.1.4.1.6321.1.2.3.2.8.8.3.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The IP mask of the route domain IP. | ||||
| CrpvcRouteDomainRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.8.3.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| SrpvcArpAgingTime | 1.3.6.1.4.1.6321.1.2.3.2.8.8.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set RPVC ARP proxy aging time 10..10000 seconds, 0 to disable againg. | ||||
| SrpvcArpFlush | 1.3.6.1.4.1.6321.1.2.3.2.8.8.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Flush the RPVC ARP proxy table.
| ||||
| TdsBcastDisableTable | 1.3.6.1.4.1.6321.1.2.3.2.8.9 | NA | ||
table · not-accessible · current This table includes Down Stream Bcast configuration. | ||||
| RdsBcastDisableEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.9.1 | NA | ||
row · not-accessible · current An entry in Down Stream Bcast table.
| ||||
| CdsBcastDisableVlanId | 1.3.6.1.4.1.6321.1.2.3.2.8.9.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current downstream broadcast disabled vid. | ||||
| CdsBcastDisableRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.9.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| Npaepvc | 1.3.6.1.4.1.6321.1.2.3.2.8.10 | |||
| TpaepvcTable | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1 | NA | ||
table · not-accessible · current This table includes PPPoAoE PVC configuration. | ||||
| RpaepvcEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1 | NA | ||
row · not-accessible · current An entry of paepvcTable.
| ||||
| CpaepvcVpi | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the pvc. | ||||
| CpaepvcVci | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VCI of the pvc. | ||||
| CpaepvcPvid | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.3 | VlanIndex | RO | |
column · VlanIndex · read-only · current Default VID of the pvc. | ||||
| CpaepvcPriority | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.5 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current 802.1p default priority of the pvc. | ||||
| CpaepvcProfileDS | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.6 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side. | ||||
| CpaepvcAcName | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.7 | DisplayString | RC | |
column · DisplayString · read-create · current Access concentrator name. | ||||
| CpaepvcServiceName | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.8 | DisplayString | RC | |
column · DisplayString · read-create · current Service name. | ||||
| CpaepvcHelloTime | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.
| ||||
| CpaepvcRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.10 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| CpaepvcProfileUS | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.11 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side. | ||||
| CpaepvcCvid | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.12 | VlanIndex | RC | |
column · VlanIndex · read-create · current Default C-VID of the pvc. | ||||
| CpaepvcCPriority | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.13 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current 802.1p default C-priority of the pvc. | ||||
| Ntlspvc | 1.3.6.1.4.1.6321.1.2.3.2.8.11 | |||
| TtlspvcTable | 1.3.6.1.4.1.6321.1.2.3.2.8.11.1 | NA | ||
table · not-accessible · current This table includes Transparent LAN Service (TLS) PVC configuration. | ||||
| RtlspvcEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.11.1.1 | NA | ||
row · not-accessible · current An entry of tlspvcTable.
| ||||
| CtlspvcVpi | 1.3.6.1.4.1.6321.1.2.3.2.8.11.1.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the pvc. | ||||
| CtlspvcVci | 1.3.6.1.4.1.6321.1.2.3.2.8.11.1.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VCI of the pvc. | ||||
| CtlspvcSvid | 1.3.6.1.4.1.6321.1.2.3.2.8.11.1.1.3 | VlanIndex | RO | |
column · VlanIndex · read-only · current s-tag VLAN ID of the pvc. | ||||
| CtlspvcSpriority | 1.3.6.1.4.1.6321.1.2.3.2.8.11.1.1.5 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current s-tag priority of the pvc. | ||||
| CtlspvcProfileDS | 1.3.6.1.4.1.6321.1.2.3.2.8.11.1.1.6 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side. | ||||
| CtlspvcRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.11.1.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| CtlspvcProfileUS | 1.3.6.1.4.1.6321.1.2.3.2.8.11.1.1.8 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side. | ||||
| Nipbpvc | 1.3.6.1.4.1.6321.1.2.3.2.8.12 | |||
| TipbpvcDomainTable | 1.3.6.1.4.1.6321.1.2.3.2.8.12.1 | NA | ||
table · not-accessible · current This table includes ipbpvc domain configuration. This table is supported by R3.00 and later versions. | ||||
| RipbpvcDomainEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.12.1.1 | NA | ||
| CipbpvcDomainName | 1.3.6.1.4.1.6321.1.2.3.2.8.12.1.1.1 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Name of the domain. | ||||
| CipbpvcDomainRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.12.1.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current Row status of the table. | ||||
| TipbpvcDomainVlanTable | 1.3.6.1.4.1.6321.1.2.3.2.8.12.2 | NA | ||
table · not-accessible · current This table includes ipbpvc domain VLAN configuration. This table is supported by R3.00 and later versions. | ||||
| RipbpvcDomainVlanEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.12.2.1 | NA | ||
row · not-accessible · current An entry of ipbpvcDomainVlanTable. | ||||
| CipbpvcDomainVlanId | 1.3.6.1.4.1.6321.1.2.3.2.8.12.2.1.1 | VlanIndex | RO | |
column · VlanIndex · read-only · current Set VLAN to join or leave the specified domain. | ||||
| CipbpvcDomainDhcpVlanEnable | 1.3.6.1.4.1.6321.1.2.3.2.8.12.2.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable DHCP VLAN in a domain.
| ||||
| CipbpvcDomainVlanRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.12.2.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Row status of the table used to create/delete an entry. | ||||
| TipbpvcEdgeRouterTable | 1.3.6.1.4.1.6321.1.2.3.2.8.12.3 | NA | ||
table · not-accessible · current This table includes ipbpvc edge router configuration. This table is supported by R3.00 and later versions. | ||||
| RipbpvcEdgeRouterEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.12.3.1 | NA | ||
row · not-accessible · current An entry of ipbpvcEdgeRouterTable. | ||||
| CipbpvcEdgeRouterIp | 1.3.6.1.4.1.6321.1.2.3.2.8.12.3.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current IP address of the edge router. | ||||
| CipbpvcEdgeRouterVid | 1.3.6.1.4.1.6321.1.2.3.2.8.12.3.1.2 | VlanIndex | RO | |
column · VlanIndex · read-only · current VLAN ID of the edge router. | ||||
| CipbpvcEdgeRouterMask | 1.3.6.1.4.1.6321.1.2.3.2.8.12.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Netmask of the edge router. | ||||
| CipbpvcEdgeRouterRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.12.3.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Row status of the table used to create/delete an entry. | ||||
| TipbpvcInterfaceTable | 1.3.6.1.4.1.6321.1.2.3.2.8.12.4 | NA | ||
table · not-accessible · current This table includes ipbpvc interface configuration. This table is supported by R3.00 and later versions. | ||||
| RipbpvcInterfaceEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.12.4.1 | NA | ||
row · not-accessible · current An entry of ipbpvcInterfaceTable. | ||||
| CipbpvcInterfaceIp | 1.3.6.1.4.1.6321.1.2.3.2.8.12.4.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current IP address of the interface. | ||||
| CipbpvcInterfaceMask | 1.3.6.1.4.1.6321.1.2.3.2.8.12.4.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Netmask of the interface. | ||||
| CipbpvcInterfaceVid | 1.3.6.1.4.1.6321.1.2.3.2.8.12.4.1.3 | VlanIndex | RO | |
column · VlanIndex · read-only · current VLAN ID of the interface. | ||||
| CipbpvcInterfaceIfIndex | 1.3.6.1.4.1.6321.1.2.3.2.8.12.4.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current IfIndex of the interface. | ||||
| CipbpvcInterfaceVpi | 1.3.6.1.4.1.6321.1.2.3.2.8.12.4.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current VPI of the interface. | ||||
| CipbpvcInterfaceVci | 1.3.6.1.4.1.6321.1.2.3.2.8.12.4.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current VCI of the interface. | ||||
| CipbpvcInterfaceRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.12.4.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current Row status of the table used to create/delete an entry. | ||||
| TipbpvcRouteTable | 1.3.6.1.4.1.6321.1.2.3.2.8.12.5 | NA | ||
table · not-accessible · current This table includes ipbpvc route configuration. This table is supported by R3.00 and later versions. | ||||
| RipbpvcRouteEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.12.5.1 | NA | ||
row · not-accessible · current An entry of ipbpvcRouteTable. | ||||
| CipbpvcRouteIp | 1.3.6.1.4.1.6321.1.2.3.2.8.12.5.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current IP address of the route. | ||||
| CipbpvcRouteMask | 1.3.6.1.4.1.6321.1.2.3.2.8.12.5.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Netmask of the route. | ||||
| CipbpvcRouteNextHop | 1.3.6.1.4.1.6321.1.2.3.2.8.12.5.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current Next hop IP address of the route. | ||||
| CipbpvcRouteMetric | 1.3.6.1.4.1.6321.1.2.3.2.8.12.5.1.4 | INTEGER (1..15) | RC | |
column · INTEGER (1..15) · read-create · current Metric of the route. | ||||
| CipbpvcRoutePriority | 1.3.6.1.4.1.6321.1.2.3.2.8.12.5.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current Priority of the route. Note that the default value of this object is 8, which means we keep the original priority of the packet(frame). | ||||
| CipbpvcRouteRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.12.5.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current Row status of the table used to create/delete an entry. | ||||
| TipbpvcTable | 1.3.6.1.4.1.6321.1.2.3.2.8.12.6 | NA | ||
table · not-accessible · current This table includes ipbpvc configuration. This table is supported by R3.00 and later versions. | ||||
| RipbpvcEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1 | NA | ||
row · not-accessible · current An entry of ipbpvcTable.
| ||||
| CipbpvcVpi | 1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current VPI of the PVC. | ||||
| CipbpvcVci | 1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current VCI of the PVC. | ||||
| CipbpvcPvid | 1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current PVID of the PVC. | ||||
| CipbpvcEncap | 1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Type of the PVC.
| ||||
| CipbpvcPriority | 1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1.5 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current Priority of the PVC. | ||||
| CipbpvcProfile | 1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1.6 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current Profile of the PVC. | ||||
| CipbpvcRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current Row status of the table used to create/delete an entry. | ||||
| CipbpvcProfileUS | 1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1.8 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current US Profile of the PVC. | ||||
| Narpproxy | 1.3.6.1.4.1.6321.1.2.3.2.8.12.8 | |||
| SarpproxyAge | 1.3.6.1.4.1.6321.1.2.3.2.8.12.8.1 | INTEGER (10..10000) | RW | |
scalar · INTEGER (10..10000) · read-write · current Aging time of the ARP proxy. This object is supported by R3.00 and later versions.
| ||||
| NarpproxyFlush | 1.3.6.1.4.1.6321.1.2.3.2.8.12.8.2 | |||
| SarpproxyFlushTarget | 1.3.6.1.4.1.6321.1.2.3.2.8.12.8.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The target whose ARP table to be flushed. This object is supported by R3.00 and later versions.
| ||||
| SarpproxyFlushOps | 1.3.6.1.4.1.6321.1.2.3.2.8.12.8.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set the object to 1 to start flushing. This object is supported by R3.00 and later versions. | ||||
| SarpproxyFlushEdgeRouterIp | 1.3.6.1.4.1.6321.1.2.3.2.8.12.8.2.3 | IpAddress | RW | |
scalar · IpAddress · read-write · current Flush ARP table for the specified edge router. This object is supported by R3.00 and later versions. | ||||
| SarpproxyFlushEdgeRouterVid | 1.3.6.1.4.1.6321.1.2.3.2.8.12.8.2.4 | VlanIndex | RW | |
scalar · VlanIndex · read-write · current Flush ARP table for the specified edge router. This object is supported by R3.00 and later versions. | ||||
| SarpproxyFlushInterfaceIp | 1.3.6.1.4.1.6321.1.2.3.2.8.12.8.2.5 | IpAddress | RW | |
scalar · IpAddress · read-write · current Flush ARP table for the specified interface. This object is supported by R3.00 and later versions. | ||||
| SarpproxyFlushInterfaceMask | 1.3.6.1.4.1.6321.1.2.3.2.8.12.8.2.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Flush ARP table for the specified interface. This object is supported by R3.00 and later versions. | ||||
| SarpproxyFlushInterfaceVid | 1.3.6.1.4.1.6321.1.2.3.2.8.12.8.2.7 | VlanIndex | RW | |
scalar · VlanIndex · read-write · current Flush ARP table for the specified interface. This object is supported by R3.00 and later versions. | ||||
| NvoipPort | 1.3.6.1.4.1.6321.1.2.3.2.8.13 | |||
| TvoipSipLineConfTable | 1.3.6.1.4.1.6321.1.2.3.2.8.13.1 | NA | ||
table · not-accessible · current This table includes common attributes describing the VoIP line. | ||||
| RvoipSipLineConfEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.13.1.1 | NA | ||
| CvoipSipLineConfSipProfile | 1.3.6.1.4.1.6321.1.2.3.2.8.13.1.1.1 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current SIP profile name. | ||||
| CvoipSipLineConfSipCallSvcProfile | 1.3.6.1.4.1.6321.1.2.3.2.8.13.1.1.2 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current SIP call service profile name. | ||||
| CvoipSipLineConfDspProfile | 1.3.6.1.4.1.6321.1.2.3.2.8.13.1.1.3 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current DSP profile name. | ||||
| NportOperations | 1.3.6.1.4.1.6321.1.2.3.2.8.13.2 | |||
| SvoipPortTarget | 1.3.6.1.4.1.6321.1.2.3.2.8.13.2.1 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The managed object is used for identify the target on which
the port configuration should be performed. The target is encoded as:
Byte 1: 0, Reserved(chaises)
Byte 2~3: 0,0 Reserved(slot)
Byte 4: 0, Reserved
Byte 5~11:Each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc. | ||||
| SvoipPortOps | 1.3.6.1.4.1.6321.1.2.3.2.8.13.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The managed object is for VoIP configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the corresponding bit value to be 1. The various bit positions are: BIT 1: enable port BIT 2: disable port | ||||
| SvoipPortEnableStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.13.2.3 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current This read only entry is for showing current voip enable/disable status of each port. The status is encoded as: Byte 1: 0, Reserved Byte 2~3: 0,0 Reserved Byte 4: 0, Reserved Byte 5~11:Each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc. | ||||
| TvoipPortTelTable | 1.3.6.1.4.1.6321.1.2.3.2.8.13.3 | NA | ||
table · not-accessible · current This table includes VoIP tel for the port. | ||||
| RvoipPortTelEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.13.3.1 | NA | ||
| CvoipPortTel | 1.3.6.1.4.1.6321.1.2.3.2.8.13.3.1.1 | DisplayString (SIZE (0..15)) | RW | |
column · DisplayString (SIZE (0..15)) · read-write · current VoIP's telephone number of the specified port. | ||||
| TvoipPortGainTable | 1.3.6.1.4.1.6321.1.2.3.2.8.13.6 | NA | ||
table · not-accessible · current This table includes Port Gain. | ||||
| RvoipPortGainEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.13.6.1 | NA | ||
| CvoipPortTXGain | 1.3.6.1.4.1.6321.1.2.3.2.8.13.6.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current TX Gain of the port, -200~200 in unit of 0.1dB. | ||||
| CvoipPortRXGain | 1.3.6.1.4.1.6321.1.2.3.2.8.13.6.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current RX Gain of the port, -200~200 in unit of 0.1dB. | ||||
| TvoipH248LineConfTable | 1.3.6.1.4.1.6321.1.2.3.2.8.13.7 | NA | ||
table · not-accessible · current This table includes common attributes describing the VoIP line. | ||||
| RvoipH248LineConfEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.13.7.1 | NA | ||
| CvoipH248LineConfMgName | 1.3.6.1.4.1.6321.1.2.3.2.8.13.7.1.1 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current MG name. | ||||
| CvoipH248LineConfDspProfile | 1.3.6.1.4.1.6321.1.2.3.2.8.13.7.1.2 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current DSP profile name. | ||||
| CvoipH248LineConfVBDProfile | 1.3.6.1.4.1.6321.1.2.3.2.8.13.7.1.3 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current DSP profile name for Voice Band Data (FAX or Modem) mode. | ||||
| TvoipPortH248TerminationTable | 1.3.6.1.4.1.6321.1.2.3.2.8.13.8 | NA | ||
table · not-accessible · current This table includes Termination name. | ||||
| RvoipPortH248TerminationEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.13.8.1 | NA | ||
| CvoipPortH248TermName | 1.3.6.1.4.1.6321.1.2.3.2.8.13.8.1.1 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Termination name of MG. | ||||
| Ndtpvc | 1.3.6.1.4.1.6321.1.2.3.2.8.14 | |||
| TdtpvcTable | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1 | NA | ||
table · not-accessible · current This table includes Double Tagging (DT) PVC configuration. | ||||
| RdtpvcEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1 | NA | ||
| CdtpvcVpi | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the pvc. | ||||
| CdtpvcVci | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VCI of the pvc. | ||||
| CdtpvcSvid | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.3 | VlanIndex | RO | |
column · VlanIndex · read-only · current s-tag VLAN ID of the pvc. | ||||
| CdtpvcSpriority | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.4 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current s-tag priority of the pvc. | ||||
| CdtpvcCvid | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.5 | VlanIndex | RC | |
column · VlanIndex · read-create · current c-tag VLAN ID of the pvc. | ||||
| CdtpvcCpriority | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.6 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current c-tag priority of the pvc. | ||||
| CdtpvcDSProfile | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.7 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The value of this object identifies the row in the atmProfileTable, which applies for this dtpvc in DS side. | ||||
| CdtpvcUSProfile | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.8 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The value of this object identifies the row in the atmProfileTable, which applies for this dtpvc in US side. | ||||
| CdtpvcRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.9 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| CdtpvcSuperChannel | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current Specified the configured DTPVC is a super channel.
| ||||
| CdtpvcAcName | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.11 | DisplayString | RC | |
column · DisplayString · read-create · current Access concentrator name for paepvc. | ||||
| CdtpvcServiceName | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.12 | DisplayString | RC | |
column · DisplayString · read-create · current Service name for paepvc. | ||||
| CdtpvcHelloTime | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.13 | INTEGER | RC | |
column · INTEGER · read-create · current The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.
| ||||
| TdtpvcStateTable | 1.3.6.1.4.1.6321.1.2.3.2.8.14.2 | NA | ||
table · not-accessible · current This table show current DTPVC status. | ||||
| RdtpvcStateEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1 | NA | ||
row · not-accessible · current An entry in dtpvcStateTable. | ||||
| CdtpvcStateVpi | 1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the dtpvc. | ||||
| CdtpvcStateVci | 1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VCI of the dtpvc. | ||||
| CdtpvcStateSvid | 1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1.3 | VlanIndex | RO | |
column · VlanIndex · read-only · current Default S-VID of the dtpvc. | ||||
| CdtpvcStateSPriority | 1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1.4 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current S-priority of the dtpvc. | ||||
| CdtpvcStateCvid | 1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1.5 | VlanIndex | RO | |
column · VlanIndex · read-only · current Default C-VID of the dtpvc. | ||||
| CdtpvcStateCPriority | 1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1.6 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current C-priority of the dtpvc. | ||||
| CdtpvcStateChannelType | 1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1.8 | DisplayString (SIZE (1..31)) | RO | |
column · DisplayString (SIZE (1..31)) · read-only · current The value of this object identifies the channel type at runtime. | ||||
| CdtpvcStateEncap | 1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1.9 | DisplayString (SIZE (1..31)) | RO | |
column · DisplayString (SIZE (1..31)) · read-only · current The value of this object identifies the channel encapsulation at runtime. | ||||
| NsnrMgn | 1.3.6.1.4.1.6321.1.2.3.2.8.15 | |||
| TsnrMgnTable | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1 | NA | ||
table · not-accessible · current A table containing the per port SNR Margin configuration. | ||||
| RsnrMgnEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1 | NA | ||
| CsnrMgnMode | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Configure DSL SNR margin configuration mode of the specified ports. Profile: the SNR margin configuration comes from DSL profile. Line: the SNR margin configuration comes from line configuration.
| ||||
| CsnrMgnUcTarget | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.2 | INTEGER (0..310) | RW | |
column · INTEGER (0..310) · read-write · current Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.
| ||||
| CsnrMgnUcMax | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.3 | INTEGER (0..310) | RW | |
column · INTEGER (0..310) · read-write · current Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation.
| ||||
| CsnrMgnUcMin | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.4 | INTEGER (0..310) | RW | |
column · INTEGER (0..310) · read-write · current Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or shut down.
| ||||
| CsnrMgnUcDownshift | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.5 | INTEGER (0..310) | RW | |
column · INTEGER (0..310) · read-write · current Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that RADSL mode is not present, the value will be `0'.
| ||||
| CsnrMgnUcUpshift | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.6 | INTEGER (0..310) | RW | |
column · INTEGER (0..310) · read-write · current Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that RADSL is not present, the value will be `0'.
| ||||
| CsnrMgnUrTarget | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.7 | INTEGER (0..310) | RW | |
column · INTEGER (0..310) · read-write · current Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.
| ||||
| CsnrMgnUrMax | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.8 | INTEGER (0..310) | RW | |
column · INTEGER (0..310) · read-write · current Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation.
| ||||
| CsnrMgnUrMin | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.9 | INTEGER (0..310) | RW | |
column · INTEGER (0..310) · read-write · current Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or shut down.
| ||||
| CsnrMgnUrDownshift | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.10 | INTEGER (0..310) | RW | |
column · INTEGER (0..310) · read-write · current Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that RADSL mode is not present, the value will be `0'.
| ||||
| CsnrMgnUrUpshift | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.11 | INTEGER (0..310) | RW | |
column · INTEGER (0..310) · read-write · current Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that RADSL is not present, the value will be `0'.
| ||||
| NdslRate | 1.3.6.1.4.1.6321.1.2.3.2.8.16 | |||
| TdslRateTable | 1.3.6.1.4.1.6321.1.2.3.2.8.16.1 | NA | ||
table · not-accessible · current A table containing the per port DSL Rate configuration. | ||||
| RdslRateEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1 | NA | ||
| CdslRateMode | 1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Configure DSL Rate configuration mode of the specified ports. Profile: the DSL Rate configuration comes from DSL profile. Line: the DSL Rate configuration comes from line configuration.
| ||||
| CdslRateLatencyMode | 1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The latency mode is fast or interleave
| ||||
| CdslRateXtucMaxInterleaveDelay | 1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1.3 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency.
| ||||
| CdslRateXtucMaxTxRate | 1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1.4 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Configured Maximum Transmit rate for `Fast' or `Interleave' channels, in bps.
| ||||
| CdslRateXtucMinTxRate | 1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1.5 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Configured Minimum Transmit rate for `Fast' or `Interleave' channels, in bps
| ||||
| CdslRateXturMaxInterleaveDelay | 1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1.6 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency
| ||||
| CdslRateXturMaxTxRate | 1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1.7 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.
| ||||
| CdslRateXturMinTxRate | 1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1.8 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Configured Maximum Transmit rate for `Fast' or `Interleave' channels, in bps.
| ||||
| Ngbond | 1.3.6.1.4.1.6321.1.2.3.2.8.51 | |||
| TgbondGroupTable | 1.3.6.1.4.1.6321.1.2.3.2.8.51.1 | NA | ||
table · not-accessible · current A table containing the G.Bond configuration information for each bonding group of the device. | ||||
| RgbondGroupEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.51.1.1 | NA | ||
| CgbondGroupName | 1.3.6.1.4.1.6321.1.2.3.2.8.51.1.1.1 | OCTET STRING (SIZE (0..31)) | RO | |
column · OCTET STRING (SIZE (0..31)) · read-only · current An administratively assigned string, which may be used to identify bonding group. | ||||
| CgbondGroupPorts | 1.3.6.1.4.1.6321.1.2.3.2.8.51.1.1.2 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current The set of ports which are currently assigned to the
bonding group of specified group name.
Byte 1: Reserved(chassis)
Byte 2~3: Reserved(slot)
Byte 4: Reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc. | ||||
| CgbondGroupUpRate | 1.3.6.1.4.1.6321.1.2.3.2.8.51.1.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The UP stream rate. | ||||
| CgbondGroupDownRate | 1.3.6.1.4.1.6321.1.2.3.2.8.51.1.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The DOWN stream rate. | ||||
| CgbondGroupRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.51.1.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry. | ||||
| Nprofile | 1.3.6.1.4.1.6321.1.2.3.2.9 | |||
| NvoipProfile | 1.3.6.1.4.1.6321.1.2.3.2.9.7 | |||
| NsipProfile | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1 | |||
| SmaxNumOfSipProfiles | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of SIP profiles supported by the system. | ||||
| TsipProfileTable | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2 | NA | ||
table · not-accessible · current This table includes SIP protocol related configuration. | ||||
| RsipProfileEntry | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1 | NA | ||
| CsipProfileName | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.1 | DisplayString (SIZE (1..31)) | RO | |
column · DisplayString (SIZE (1..31)) · read-only · current This object is used by the SIP profile table in order to identify a row of this table. | ||||
| CsipProfileSipSvr | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.2 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current IP used for SIP registration or SIP domain name. | ||||
| CsipProfileRegSvr | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.3 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current Registration server IP or registration server domain name. | ||||
| CsipProfileProxySvr | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.4 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current Proxy server IP or proxy server doamin name. | ||||
| CsipProfileSipPort | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.5 | INTEGER (1025..65535) | RC | |
column · INTEGER (1025..65535) · read-create · current SIP UA port number. | ||||
| CsipProfileRegSvrPort | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.6 | INTEGER (1025..65535) | RC | |
column · INTEGER (1025..65535) · read-create · current Registration server port number. | ||||
| CsipProfileProxySvrPort | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.7 | INTEGER (1025..65535) | RC | |
column · INTEGER (1025..65535) · read-create · current Proxy server port number. | ||||
| CsipProfileUriType | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current
| ||||
| CsipProfilePbit | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.9 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current 802.1p bit for SIP and RTP packet. | ||||
| CsipProfileDscp | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.10 | INTEGER (0..63) | RC | |
column · INTEGER (0..63) · read-create · current DSCP for SIP and RTP packet. | ||||
| CsipProfileKeepAlive | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current
| ||||
| CsipProfileSe | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.12 | INTEGER (90..65535) | RC | |
column · INTEGER (90..65535) · read-create · current Session expiration time in seconds.
| ||||
| CsipProfilePrack | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.13 | INTEGER | RC | |
column · INTEGER · read-create · current
| ||||
| CsipProfileRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.14 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in the table. | ||||
| CsipProfileRegExpire | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.15 | INTEGER (120..2073600) | RC | |
column · INTEGER (120..2073600) · read-create · current Registration expiration time in seconds.
| ||||
| SmaxNumOfSipCallSvcProfiles | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of SIP call service profiles supported by the system. | ||||
| TsipCallSvcProfileTable | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4 | NA | ||
table · not-accessible · current This table includes SIP call service related configuration. | ||||
| RsipCallSvcProfileEntry | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1 | NA | ||
| CsipCallSvcProfileName | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.1 | DisplayString (SIZE (1..31)) | RO | |
column · DisplayString (SIZE (1..31)) · read-only · current This object is used by the SIP call service profile table in order to identify a row of this table. | ||||
| CsipCallSvcProfilePasswdOn | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Password is necessary or not for SIP registration.
| ||||
| CsipCallSvcProfilePasswd | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.3 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current SIP registration password. | ||||
| CsipCallSvcProfileNumberPlanOn | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current
| ||||
| CsipCallSvcProfileNumberPlanCc | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.5 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current Country code, only digit 0..9 are allowed. | ||||
| CsipCallSvcProfileNumberPlanNdc | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.6 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current National destination code, only digit 0..9 are allowed. | ||||
| CsipCallSvcProfileNumberPlanTable | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.7 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current Numbering plan table name. | ||||
| CsipCallSvcProfileStateMask | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current Bit 1 callforward : call forward(Not supported)
Bit 2 callhold : call hold
Bit 3 callwait : call waiting
Bit 4 callreturn : call return(Not supported)
Bit 5 calltransfer : call transfer
Bit 6 clip : caller line identification presentation (Caller ID)
Bit 7 clir : caller line identification restriction
Bit 8 dnd : do not disturb
Bit 9 conference : native 3-way conference | ||||
| CsipCallSvcProfileDtmf | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current dtmf bypass : bypass DTMF tone dtmf rfc2833 : DTMF tone relay according to RFC2833 dtmf rfc2833like : DTMF tone relay by SIP INFO message, but RFC2833 payload dtmf sipinfo : DTMF tone relay by SIP INFO message
| ||||
| CsipCallSvcProfileFax | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current fax g711 : FAX service pass through by ITU-T G.711 fax t38 : FAX service by ITU-T T.38
| ||||
| CsipCallSvcProfileRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.11 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in the table. | ||||
| CsipCallSvcProfileFlashType | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current flash invite : will send SIP INVITE message while press flash button. flash bypass : flash event will be handled by current switch type specified in sipCallSvcProfileSwitchType. flash rfc2833 : flash event will send by RTP event (16) defined in RFC 2833. flash rfc2833like : flash event will send by SIP INFO message but RTP payload. flash sipinfo-1 : flash event will be sent by SIP INFO signal=16 message. flash sipinfo-2 : flash event will be sent by SIP INFO signal=hf message. flash sipinfo-3 : flash event will be sent by SIP INFO signal=hook-flash message. flash sipinfo-4 : flash event will be sent by SIP INFO plain text 'FLASH' message. flash sipinfo-5 : flash event will be sent by multiple SIP INFO signal messages and content of signal messages come from sipCallSvcProfileFlashInfo. flash sipinfo-6 : flash event will be sent by SIP INFO and payload is specified in sipCallSvcProfileFlashInfo.
| ||||
| CsipCallSvcProfileFlashInfo | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.13 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current Strings carried in SIP INFO when specified in sipCallSvcProfileFlashType is sipinfo-5 and sipinfo-6. | ||||
| CsipCallSvcProfileSoftSwitchType | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.14 | INTEGER | RC | |
column · INTEGER · read-create · current Softswitch type is configured to specify softswitch-dependent behavior, currently only flash event is softswitch-dependent and should follow the softswitch type setting. When configured the flash event to 'bypass', E5 will follow the softswitch type setting to report hook flash event.
| ||||
| SmaxNumOfDspProfiles | 1.3.6.1.4.1.6321.1.2.3.2.9.7.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of DSP profiles supported by the system. | ||||
| TdspProfileTable | 1.3.6.1.4.1.6321.1.2.3.2.9.7.3 | NA | ||
table · not-accessible · current This table includes DSP related configuration. | ||||
| RdspProfileEntry | 1.3.6.1.4.1.6321.1.2.3.2.9.7.3.1 | NA | ||
| CdspProfileName | 1.3.6.1.4.1.6321.1.2.3.2.9.7.3.1.1 | DisplayString (SIZE (1..31)) | RO | |
column · DisplayString (SIZE (1..31)) · read-only · current This object is used by the DSP profile table in order to identify a row of this table. | ||||
| CdspProfileCodec | 1.3.6.1.4.1.6321.1.2.3.2.9.7.3.1.2 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current 0x01: g711a 0x02: g711mu 0x03: g723 0x04: g726-16 0x05: g726-24 0x06: g726-32 0x07: g726-40 0x08: g729ab the value of dspProfileCodec is OCTET STRING, there are 8 Octets, each octect is specified as 0x01, 0x03, 0x02, 0x07,0x00, 0x00, 0x00, 0x00 (to specify different CODE in priority) specify as: g711a, g723, g711mu, g726-40 | ||||
| CdspProfilePlayBufferMinDelay | 1.3.6.1.4.1.6321.1.2.3.2.9.7.3.1.3 | INTEGER (10..500) | RC | |
column · INTEGER (10..500) · read-create · current Play buffer minimum delay in milliseconds. It should be less than or equal to dspProfilePlayBufferMaxDelay.
| ||||
| CdspProfilePlayBufferMaxDelay | 1.3.6.1.4.1.6321.1.2.3.2.9.7.3.1.4 | INTEGER (10..500) | RC | |
column · INTEGER (10..500) · read-create · current Play buffer maximum delay in milliseconds. It should be greater than or equal to dspProfilePlayBufferMinDelay.
| ||||
| CdspProfileEchoTail | 1.3.6.1.4.1.6321.1.2.3.2.9.7.3.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current Echo cancellation echo tail period in milliseconds.
| ||||
| CdspProfileRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.9.7.3.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in the table. | ||||
| CdspProfileG711Vpi | 1.3.6.1.4.1.6321.1.2.3.2.9.7.3.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current Voice Packetization Interval(VPI) of codec G.711 in milliseconds. The values are 10, 20, 30, 40
| ||||
| CdspProfileG723Vpi | 1.3.6.1.4.1.6321.1.2.3.2.9.7.3.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current Voice Packetization Interval(VPI) of G.723 codec in milliseconds. The values are 30,60
| ||||
| CdspProfileG726Vpi | 1.3.6.1.4.1.6321.1.2.3.2.9.7.3.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current Voice Packetization Interval(VPI) of G.726 codec in milliseconds. The values are 10, 20, 30, 40
| ||||
| CdspProfileG729Vpi | 1.3.6.1.4.1.6321.1.2.3.2.9.7.3.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current Voice Packetization Interval(VPI) of G.729 codec in milliseconds. The values are 10, 20, 30, 40, 50, 60
| ||||
| Nh248Profile | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4 | |||
| SmaxNumOfH248Profiles | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of H248 profiles supported by the system. | ||||
| Th248ProfileTable | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2 | NA | ||
table · not-accessible · current This table includes H248 profile related configuration. | ||||
| Rh248ProfileEntry | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1 | NA | ||
| Ch248ProfileName | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.1 | DisplayString (SIZE (1..31)) | RO | |
column · DisplayString (SIZE (1..31)) · read-only · current This object is used by the H248 profile table in order to identify a row of this table. | ||||
| Ch248ProfileMgcSvr | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.2 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current MGC IP or MGC doamin name. | ||||
| Ch248ProfileMgcPort | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.3 | INTEGER (1025..65535) | RC | |
column · INTEGER (1025..65535) · read-create · current MGC port number. | ||||
| Ch248ProfileMgc2On | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Secondary MGC on/off.
| ||||
| Ch248ProfileMgc2Svr | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.5 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current Secondary MGC IP or MGC doamin name. h248ProfileMgc2On needs to turn on if user want to set Secondary MGC IP or domain name. | ||||
| Ch248ProfileMgc2Port | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.6 | INTEGER (1025..65535) | RC | |
column · INTEGER (1025..65535) · read-create · current Secondary MGC port number. h248ProfileMgc2On needs to turn on if user want to set Secondary MGC port number. | ||||
| Ch248ProfileTransport | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current Transport procotol used by the H.248 protocol stack.
| ||||
| Ch248ProfileEncode | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current Encoding type used by the H.248 protocol stack
| ||||
| Ch248ProfilePbit | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.9 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current 802.1p bit for H.248 packet. | ||||
| Ch248ProfileDscp | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.10 | INTEGER (0..63) | RC | |
column · INTEGER (0..63) · read-create · current DSCP for H.248 packet. | ||||
| Ch248ProfileRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.11 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in the table. | ||||
| Ch248ProfileVbd | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current VBD mode support on/off
| ||||
| Ch248ProfileEphemeralPrefix | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.14 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current Ephemeral Termination Prefix | ||||
| Ch248ProfileSoftswitch | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.15 | INTEGER | RC | |
column · INTEGER · read-create · current Softswitch type
| ||||
| Ch248ProfileForceVer | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.16 | INTEGER | RC | |
column · INTEGER · read-create · current Force using H.248 version 1
| ||||
| Ch248ProfileStartRTPPort | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.17 | INTEGER (4000..64000) | RC | |
column · INTEGER (4000..64000) · read-create · current Start of RTP port number. | ||||
| Ch248ProfileEndRTPPort | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.18 | INTEGER (5000..65000) | RC | |
column · INTEGER (5000..65000) · read-create · current End of RTP port number. | ||||
| Ch248ProfileEphemeralStartNumber | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.19 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current Ephemeral termination suffix start number, up to 15 digits. | ||||
| Ch248ProfileEphemeralSuffixLength | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.20 | INTEGER (0..15) | RC | |
column · INTEGER (0..15) · read-create · current Ephemeral termination suffix number length , padding zero at the front if not long enough. | ||||
| Ch248ProfilePhysicalPrefix | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.21 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current Physical Termination Prefix. | ||||
| Ch248ProfilePhysicalStartNumber | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.22 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current Physical termination suffix start number, up to 15 digits. | ||||
| Ch248ProfilePhysicalSuffixLength | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.23 | INTEGER (0..15) | RC | |
column · INTEGER (0..15) · read-create · current Physical termination suffix number length , padding zero at the front if not long enough. | ||||
| Nswitch | 1.3.6.1.4.1.6321.1.2.3.2.10 | |||
| Ndscp | 1.3.6.1.4.1.6321.1.2.3.2.10.10 | |||
| TdscpMappingTable | 1.3.6.1.4.1.6321.1.2.3.2.10.10.1 | NA | ||
table · not-accessible · current The table contains DSCP mapping configuration for the adsl and ethernet ports. | ||||
| RdscpMappingEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.10.1.1 | NA | ||
| CdscpSrcCodePoint | 1.3.6.1.4.1.6321.1.2.3.2.10.10.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The DSCP source code point used for mapping. | ||||
| CdscpMapPriority | 1.3.6.1.4.1.6321.1.2.3.2.10.10.1.1.3 | INTEGER (0..7) | RW | |
column · INTEGER (0..7) · read-write · current The mapping p bits that will replace the source p bits in the incoming packet. | ||||
| TdscpPortTable | 1.3.6.1.4.1.6321.1.2.3.2.10.10.2 | NA | ||
table · not-accessible · current The table contains DSCP mapping configuration for the adsl and ethernet ports. | ||||
| RdscpPortEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.10.2.1 | NA | ||
| CdscpStatusEnable | 1.3.6.1.4.1.6321.1.2.3.2.10.10.2.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The DSCP port status.
| ||||
| NvlanIsolation | 1.3.6.1.4.1.6321.1.2.3.2.10.12 | |||
| TvlanIsolationTable | 1.3.6.1.4.1.6321.1.2.3.2.10.12.1 | NA | ||
table · not-accessible · current A table contains configuration of isolated VLAN. | ||||
| RvlanIsolationEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.12.1.1 | NA | ||
| CvlanIsolationRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.10.12.1.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current Row status of the table used to create/delete an entry. | ||||
| NenetMtu | 1.3.6.1.4.1.6321.1.2.3.2.10.13 | |||
| SenetMtuEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.13.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the MTU size for layer 2 frame, size from 1526 to 1532, default value is 1526. | ||||
| Ndhcp | 1.3.6.1.4.1.6321.1.2.3.2.10.51 | |||
| TdhcpRelay82Table | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2 | NA | ||
table · not-accessible · current A table that contains DHCP Relay configuration. | ||||
| RdhcpRelay82Entry | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1 | NA | ||
| CdhcpRelay82PrimaryServer | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.1 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of the DHCP Relay primary server. | ||||
| CdhcpRelay82SecondaryServer | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.2 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of the DHCP Relay secondary server. | ||||
| CdhcpRelay82ActiveServer | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The current active DHCP Relay server.
| ||||
| CdhcpRelay82Enable | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable DHCP relay and Option82 function.
| ||||
| CdhcpRelay82Info | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.5 | DisplayString (SIZE (0..23)) | RC | |
column · DisplayString (SIZE (0..23)) · read-create · current User specific Option82 information. | ||||
| CdhcpRelay82RelayMode | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current DHCP relay mode.
| ||||
| CdhcpRelay82Suboption2Enable | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable Option 82 sub-option 2.
| ||||
| CdhcpRelay82Suboption2Info | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.9 | DisplayString | RC | |
column · DisplayString · read-create · current User specified information for Option 82 sub-option 2. | ||||
| CdhcpRelay82EntryEnable | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable DHCP Relay
| ||||
| CdhcpRelay82EntryOptionMode | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current Option82 format.
| ||||
| CdhcpRelay82VlanIp | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.12 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of the DHCP Relay interface for this VLAN. | ||||
| CdhcpRelay82VlanMask | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current The network mask of the DHCP Relay interface for this VLAN. | ||||
| CdhcpRelay82VlanGateway | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.14 | IpAddress | RW | |
column · IpAddress · read-write · current The gateway of the DHCP Relay interface for this VLAN. | ||||
| CdhcpRelay82ThirdServer | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.15 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of the DHCP Relay third server. | ||||
| CdhcpRelay82FourthServer | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.16 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of the DHCP Relay fourth server. | ||||
| CdhcpRelay82FifthServer | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.17 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of the DHCP Relay fifth server. | ||||
| CdhcpRelay82ServerVid | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.18 | INTEGER | RW | |
column · INTEGER · read-write · current The VID of the DHCP Relay server for this VLAN. | ||||
| NdhcpRelayTest | 1.3.6.1.4.1.6321.1.2.3.2.10.51.8 | |||
| SdhcpRelayTestVid | 1.3.6.1.4.1.6321.1.2.3.2.10.51.8.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting the VID of the test server. | ||||
| SdhcpRelayTestIp | 1.3.6.1.4.1.6321.1.2.3.2.10.51.8.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current Setting the IP of the test server. | ||||
| SdhcpRelayTestOps | 1.3.6.1.4.1.6321.1.2.3.2.10.51.8.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set the object to 1 to test DHCP server. | ||||
| SdhcpRelayTestStatus | 1.3.6.1.4.1.6321.1.2.3.2.10.51.8.4 | DisplayString | RO | |
scalar · DisplayString · read-only · current Display testing server status. | ||||
| NdhcpRelayArp | 1.3.6.1.4.1.6321.1.2.3.2.10.51.9 | |||
| TdhcpRelayArpShowTable | 1.3.6.1.4.1.6321.1.2.3.2.10.51.9.1 | NA | ||
table · not-accessible · current The table displays DHCP ARP. | ||||
| RdhcpRelayArpShowEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.51.9.1.1 | NA | ||
row · not-accessible · current An entry of dhcpRelayArpShowTable. | ||||
| CdhcpRelayArpShowVid | 1.3.6.1.4.1.6321.1.2.3.2.10.51.9.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Display the VID of the DHCP ARP entry. | ||||
| CdhcpRelayArpShowIp | 1.3.6.1.4.1.6321.1.2.3.2.10.51.9.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current Display the IP of the DHCP ARP entry. | ||||
| CdhcpRelayArpShowMac | 1.3.6.1.4.1.6321.1.2.3.2.10.51.9.1.1.3 | PhysAddress | RO | |
column · PhysAddress · read-only · current Display the MAC of the DHCP ARP entry. | ||||
| SdhcpRelayArpFlushOps | 1.3.6.1.4.1.6321.1.2.3.2.10.51.9.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set the object to 1 to start flushing. | ||||
| Nmacfilter | 1.3.6.1.4.1.6321.1.2.3.2.10.53 | |||
| TmacFilterPortTable | 1.3.6.1.4.1.6321.1.2.3.2.10.53.1 | NA | ||
table · not-accessible · current This table includes the status of mac filtering for each port. | ||||
| RmacFilterPortEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.53.1.1 | NA | ||
| CmacFilterPortEnable | 1.3.6.1.4.1.6321.1.2.3.2.10.53.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable MAC filtering for the port.
| ||||
| CmacFilterPortMacCount | 1.3.6.1.4.1.6321.1.2.3.2.10.53.1.1.2 | INTEGER (1..128) | RW | |
column · INTEGER (1..128) · read-write · current The total number of MAC addresses allowed for the port. | ||||
| CmacFilterPortFilterMode | 1.3.6.1.4.1.6321.1.2.3.2.10.53.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The mac filter mode (accept or deny) for the port.
| ||||
| SmaxNumOfMacFiltersInSystem | 1.3.6.1.4.1.6321.1.2.3.2.10.53.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The max number of mac filters supported in the system. | ||||
| SmaxNumOfMacFiltersPerPort | 1.3.6.1.4.1.6321.1.2.3.2.10.53.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The max number of mac filters supported per port. | ||||
| ScurrNumOfMacFiltersInSystem | 1.3.6.1.4.1.6321.1.2.3.2.10.53.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current number of mac filters in the system. | ||||
| TmacFilterTable | 1.3.6.1.4.1.6321.1.2.3.2.10.53.5 | NA | ||
table · not-accessible · current A table that contains the mac filter addresses. | ||||
| RmacFilterEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.53.5.1 | NA | ||
| CmacFilterAddr | 1.3.6.1.4.1.6321.1.2.3.2.10.53.5.1.1 | PhysAddress | RO | |
column · PhysAddress · read-only · current The mac address which can pass through or be rejected from the port. | ||||
| CmacFilterRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.10.53.5.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of the entry. | ||||
| NmacfilterBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.10.53.6 | |||
| SmacfilterTarget | 1.3.6.1.4.1.6321.1.2.3.2.10.53.6.1 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current This managed object is used for identify the target on which
the port configuration should be performed. The target is encoded as:
Byte 1: 0, Reserved(chassis)
Byte 2~3: 0, Reserved(slot)
Byte 4: 0, reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc. | ||||
| SmacfilterOps | 1.3.6.1.4.1.6321.1.2.3.2.10.53.6.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: enable mac filter BIT 2: enable mac count filter BIT 3: disable mac filter BIT 4: set mac count BIT 5: disable mac count filter. | ||||
| SmacFilterMacCountForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.10.53.6.3 | INTEGER (1..128) | RW | |
scalar · INTEGER (1..128) · read-write · current The total number of MAC addresses allowed for a port. | ||||
| TouiFilterTableOld | 1.3.6.1.4.1.6321.1.2.3.2.10.53.7 | NA | ||
table · not-accessible · current A table that contains the OUI filter addresses. | ||||
| RouiFilterEntryOld | 1.3.6.1.4.1.6321.1.2.3.2.10.53.7.1 | NA | ||
| CouiFilterAddrOld | 1.3.6.1.4.1.6321.1.2.3.2.10.53.7.1.1 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The first three bytes of the mac address which can pass through or be rejected from the port. | ||||
| CouiFilterRowStatusOld | 1.3.6.1.4.1.6321.1.2.3.2.10.53.7.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of the entry. | ||||
| SmaxNumOfOuiFiltersPerPort | 1.3.6.1.4.1.6321.1.2.3.2.10.53.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current The max number of OUI filters supported per port. | ||||
| TouiFilterPortTable | 1.3.6.1.4.1.6321.1.2.3.2.10.53.9 | NA | ||
table · not-accessible · current This table includes the status of oui filtering for each port. | ||||
| RouiFilterPortEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.53.9.1 | NA | ||
| CouiFilterPortEnable | 1.3.6.1.4.1.6321.1.2.3.2.10.53.9.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable oui filtering for the port.
| ||||
| CouiFilterPortFilterMode | 1.3.6.1.4.1.6321.1.2.3.2.10.53.9.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The oui filter mode (accept or deny) for the port.
| ||||
| SmaxNumOfOuiFiltersInSystem | 1.3.6.1.4.1.6321.1.2.3.2.10.53.10 | INTEGER | RO | |
scalar · INTEGER · read-only · current The max number of OUI filters supported in system. | ||||
| SmaxNumOfOuiFiltersPerVlan | 1.3.6.1.4.1.6321.1.2.3.2.10.53.11 | INTEGER | RO | |
scalar · INTEGER · read-only · current The max number of OUI filters supported per vlan. | ||||
| TouiFilterTable | 1.3.6.1.4.1.6321.1.2.3.2.10.53.12 | NA | ||
table · not-accessible · current A table that contains the OUI filter addresses. | ||||
| RouiFilterEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.53.12.1 | NA | ||
| CouiFilterAddr | 1.3.6.1.4.1.6321.1.2.3.2.10.53.12.1.1 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The first three bytes of the mac address which can pass through or be rejected from the vlan. | ||||
| CouiFilterRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.10.53.12.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of the entry. | ||||
| TouiFilterVlanTable | 1.3.6.1.4.1.6321.1.2.3.2.10.53.13 | NA | ||
table · not-accessible · current This table includes the status of oui filtering for each configured VLAN. | ||||
| RouiFilterVlanEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.53.13.1 | NA | ||
| CouiFilterVlanEnable | 1.3.6.1.4.1.6321.1.2.3.2.10.53.13.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable oui filtering for the VLAN.
| ||||
| CouiFilterVlanFilterMode | 1.3.6.1.4.1.6321.1.2.3.2.10.53.13.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The oui filter mode (accept or deny) for the VLAN.
| ||||
| NdhcpSnoop | 1.3.6.1.4.1.6321.1.2.3.2.10.55 | |||
| TdhcpSnoopPortTable | 1.3.6.1.4.1.6321.1.2.3.2.10.55.1 | NA | ||
table · not-accessible · current This table includes DHCP snooping enable/disable for each port. | ||||
| RdhcpSnoopPortEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.55.1.1 | NA | ||
| CdhcpSnoopEnable | 1.3.6.1.4.1.6321.1.2.3.2.10.55.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable DHCP snooping for a port.
| ||||
| CdhcpSnoopMaxcnt | 1.3.6.1.4.1.6321.1.2.3.2.10.55.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Set the max entries of the DHCP ARP table. | ||||
| CdhcpSnoopSmacverifyEnable | 1.3.6.1.4.1.6321.1.2.3.2.10.55.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable DHCP source MAC verify for a port.
| ||||
| SdhcpSnoopTarget | 1.3.6.1.4.1.6321.1.2.3.2.10.55.2 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current This managed object is used for identify the target on which
the operation should be performed. The target is encoded as:
Byte 1: the octet specifies a set of eight chassis, chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc. | ||||
| SdhcpSnoopOps | 1.3.6.1.4.1.6321.1.2.3.2.10.55.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current The corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: DHCP snooping table flush. | ||||
| TdhcpStaticTable | 1.3.6.1.4.1.6321.1.2.3.2.10.55.4 | NA | ||
table · not-accessible · current This table defines DHCP static IP addresses. | ||||
| RdhcpStaticEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.55.4.1 | NA | ||
| CdhcpStaticIpAddr | 1.3.6.1.4.1.6321.1.2.3.2.10.55.4.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address which can pass through the port. | ||||
| CdhcpStaticRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.10.55.4.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current Row status of the table entry. | ||||
| SmaxNumOfDhcpStaticIp | 1.3.6.1.4.1.6321.1.2.3.2.10.55.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of DHCP static IP addresses which can be created for a port. | ||||
| SdhcpSnoopMaxcntMode | 1.3.6.1.4.1.6321.1.2.3.2.10.55.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current When DHCP snooping table is full, new DHCP lease will replace first one in option 0 or will be dropped in option 1.
| ||||
| Nacl | 1.3.6.1.4.1.6321.1.2.3.2.10.56 | |||
| TaclSetTable | 1.3.6.1.4.1.6321.1.2.3.2.10.56.1 | NA | ||
table · not-accessible · current aclsetTable. | ||||
| RaclSetEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.56.1.1 | NA | ||
row · not-accessible · current An entry of aclSetTable.
| ||||
| CaclSetVpi | 1.3.6.1.4.1.6321.1.2.3.2.10.56.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current VPI value | ||||
| CaclSetVci | 1.3.6.1.4.1.6321.1.2.3.2.10.56.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current VCI value | ||||
| CaclSetProfileName | 1.3.6.1.4.1.6321.1.2.3.2.10.56.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current ACL Profile name | ||||
| CaclSetRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.10.56.1.1.4 | RowStatus | RW | |
column · RowStatus · read-write · current RowStatus of aclSetEntry | ||||
| TaclProfileTable | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2 | NA | ||
table · not-accessible · current aclProfileTable. | ||||
| RaclProfileEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1 | NA | ||
| CaclProfileRuleName | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.1 | DisplayString | RO | |
column · DisplayString · read-only · current Profile rule name | ||||
| CaclProfileRuleNumber | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The managed object is for acl profile rule configuration.
etype <etype> vlan <vid> (1),
etype <etype> smac <mac> (2),
etype <etype> dmac <mac> (3),
vlan <vid> smac <mac> (4),
vlan <vid> dmac <mac> (5),
smac <mac> dmac <mac> (6),
vlan <vid> priority <priority> (7),
etype <etype> (8),
vlan <vid> (9),
smac <mac> (10),
dmac <mac> (11),
priority <priority> (12),
protocol <protocol> (13),
{srcip <ip>/<mask>{|dstip <ip>/<mask>{|tos <stos> <etos>{|srcport <sport> <eport> {|dstport <sport> <eport>}}}}} (14) | ||||
| CaclProfileActionNumber | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Profile action number. Bit 1: rate Bit 2: rvlan Bit 3: rpri Bit 4: deny Bit 1, Bit 2 & Bit 3 can multiple selection. | ||||
| CaclProfileRuleParamMask | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Profile rule parameter mask. BIT 1: srcip <ip>/<mask> BIT 2: dstip <ip>/<mask> BIT 3: tos <stos> <etos> BIT 4: srcport <sport> <eport> BIT 5: dstport <sport> <eport> | ||||
| CaclProfileRuleEtype | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.5 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current Profile rule etype | ||||
| CaclProfileRuleVid | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.6 | INTEGER (1..4094) | RW | |
column · INTEGER (1..4094) · read-write · current Profile rule vid | ||||
| CaclProfileRuleSmac | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.7 | PhysAddress | RW | |
column · PhysAddress · read-write · current Profile rule source MAC | ||||
| CaclProfileRuleDmac | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.8 | PhysAddress | RW | |
column · PhysAddress · read-write · current Profile rule destination MAC | ||||
| CaclProfileRulePriority | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.9 | INTEGER (0..7) | RW | |
column · INTEGER (0..7) · read-write · current Profile rule priority | ||||
| CaclProfileRuleProtocol | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.10 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current Profile rule protocol. icmp(1),igmp(2),ip(4),tcp(6), udp(17),gre(47),ospf(89), other ptype | ||||
| CaclProfileRuleSrcIP | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.11 | IpAddress | RW | |
column · IpAddress · read-write · current Profile rule source IP | ||||
| CaclProfileRuleSrcIPMask | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.12 | INTEGER (0..32) | RW | |
column · INTEGER (0..32) · read-write · current The subnet mask of source IP mask | ||||
| CaclProfileRuleDestIP | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.13 | IpAddress | RW | |
column · IpAddress · read-write · current Profile rule source IP | ||||
| CaclProfileRuleDestIPMask | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.14 | INTEGER (0..32) | RW | |
column · INTEGER (0..32) · read-write · current The subnet mask of dest IP mask | ||||
| CaclProfileRuleStartTos | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.15 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current Profile rule start type of service | ||||
| CaclProfileRuleEndTos | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.16 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current Profile rule end type of service | ||||
| CaclProfileRuleSrcStartPort | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.17 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current Profile rule source start port | ||||
| CaclProfileRuleSrcEndPort | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.18 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current Profile rule source end port | ||||
| CaclProfileRuleDestStartPort | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.19 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current Profile rule destination start port | ||||
| CaclProfileRuleDestEndPort | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.20 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current Profile rule destination end port | ||||
| CaclProfileActionRate | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.21 | INTEGER (1..65535) | RW | |
column · INTEGER (1..65535) · read-write · current Profile action to replace to this rate | ||||
| CaclProfileActionrvlan | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.22 | INTEGER (1..4094) | RW | |
column · INTEGER (1..4094) · read-write · current Profile action to replace to this vlan | ||||
| CaclProfileActionrpri | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.23 | INTEGER (0..7) | RW | |
column · INTEGER (0..7) · read-write · current Profile action to replace to this priority | ||||
| CaclProfileRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.24 | RowStatus | RW | |
column · RowStatus · read-write · current The row status of the entry. | ||||
| NpppoeAgent | 1.3.6.1.4.1.6321.1.2.3.2.10.57 | |||
| TpppoeAgentTable | 1.3.6.1.4.1.6321.1.2.3.2.10.57.1 | NA | ||
table · not-accessible · current A table that contains PPPoE DHCP Relay configuration. | ||||
| RpppoeAgentEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.57.1.1 | NA | ||
| CpppoeAgentEnable | 1.3.6.1.4.1.6321.1.2.3.2.10.57.1.1.1 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable DHCP relay and Option82 function.
| ||||
| CpppoeAgentInfo | 1.3.6.1.4.1.6321.1.2.3.2.10.57.1.1.2 | DisplayString (SIZE (0..23)) | RC | |
column · DisplayString (SIZE (0..23)) · read-create · current User specific Option82 information. | ||||
| CpppoeAgentRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.10.57.1.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Row status of the table entry. | ||||
| CpppoeAgentOptionMode | 1.3.6.1.4.1.6321.1.2.3.2.10.57.1.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Option82 format.
| ||||
| SmaxNumOfPppoeDhcpRelay82Conf | 1.3.6.1.4.1.6321.1.2.3.2.10.57.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of rows that can be created in pppoeAgentTable. | ||||
| Nmacff | 1.3.6.1.4.1.6321.1.2.3.2.10.60 | |||
| TmacFfTable | 1.3.6.1.4.1.6321.1.2.3.2.10.60.1 | NA | ||
table · not-accessible · current A table that contains MAC Force Forwarding configuration. | ||||
| RmacFfEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.60.1.1 | NA | ||
| CmacFfIndex | 1.3.6.1.4.1.6321.1.2.3.2.10.60.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Index of the MACFF. | ||||
| CmacFfVid | 1.3.6.1.4.1.6321.1.2.3.2.10.60.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The VLAN-ID refering to this AR/AS. | ||||
| CmacFfArIP | 1.3.6.1.4.1.6321.1.2.3.2.10.60.1.1.3 | IpAddress | RW | |
column · IpAddress · read-write · current IP of this AR/AS | ||||
| CmacFfSrcIP | 1.3.6.1.4.1.6321.1.2.3.2.10.60.1.1.4 | IpAddress | RW | |
column · IpAddress · read-write · current The source IP address of the MACFF. | ||||
| CmacFfSrcMask | 1.3.6.1.4.1.6321.1.2.3.2.10.60.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The subnet mask of source IP mask. | ||||
| CmacFfRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.10.60.1.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of the MacFfEntry entry. | ||||
| SmacFfArpFlush | 1.3.6.1.4.1.6321.1.2.3.2.10.60.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set the object to 1 to flush mac table. | ||||
| SmaxNumOfMacFfVlanInSystem | 1.3.6.1.4.1.6321.1.2.3.2.10.60.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current The max number of macff Vlans supported in the system. | ||||
| TmacFfVlanTable | 1.3.6.1.4.1.6321.1.2.3.2.10.60.5 | NA | ||
table · not-accessible · current A table that contains MAC Force Forwarding Vlan configuration. | ||||
| RmacFfVlanEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.60.5.1 | NA | ||
| CmacFfVlanRowstatus | 1.3.6.1.4.1.6321.1.2.3.2.10.60.5.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current Row status of the table used to create/delete an entry. | ||||
| CmacFfVlanUnknownUnicast | 1.3.6.1.4.1.6321.1.2.3.2.10.60.5.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Setting downstream unknown uni-cast packet on macff vlan to flooding or dropping.
| ||||
| TmacFfStaticIPTable | 1.3.6.1.4.1.6321.1.2.3.2.10.60.6 | NA | ||
| RmacFfStaticIPEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.60.6.1 | NA | ||
row · not-accessible · current An entry of macFfTable. | ||||
| CmacFfStaticIPPort | 1.3.6.1.4.1.6321.1.2.3.2.10.60.6.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The port number, 1 ~ 48. | ||||
| CmacFfStaticIPVid | 1.3.6.1.4.1.6321.1.2.3.2.10.60.6.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current VLAN ID of the IP range, 1 ~ 4094, the vid should be enable the MACFF function first. | ||||
| CmacFfstaticIP | 1.3.6.1.4.1.6321.1.2.3.2.10.60.6.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The specified IP range. | ||||
| CmacFfStaticIPMask | 1.3.6.1.4.1.6321.1.2.3.2.10.60.6.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Mask_bits is 24 .. 32. | ||||
| CmacFfStaticIPRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.10.60.6.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current The row status used to configure the table entry. | ||||
| Nsys | 1.3.6.1.4.1.6321.1.2.3.2.11 | |||
| NaccessCtrl | 1.3.6.1.4.1.6321.1.2.3.2.11.5 | |||
| TsecuredClientTable | 1.3.6.1.4.1.6321.1.2.3.2.11.5.2 | NA | ||
table · not-accessible · current A table that contains information about secured clients. | ||||
| RsecuredClientEntry | 1.3.6.1.4.1.6321.1.2.3.2.11.5.2.1 | NA | ||
| CsecuredClientIndex | 1.3.6.1.4.1.6321.1.2.3.2.11.5.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The index of the entry. | ||||
| CsecuredClientStartIp | 1.3.6.1.4.1.6321.1.2.3.2.11.5.2.1.2 | IpAddress | RW | |
column · IpAddress · read-write · current The starting IP address of the secured client set. | ||||
| CsecuredClientEndIp | 1.3.6.1.4.1.6321.1.2.3.2.11.5.2.1.3 | IpAddress | RW | |
column · IpAddress · read-write · current The ending IP address of the secured client set. | ||||
| CsecuredClientService | 1.3.6.1.4.1.6321.1.2.3.2.11.5.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Each bit corresponds to a service. The bit is set to 1 if the service is enabled, and set to 0 if the service is disabled. The various bit positions are: BIT 1: telnet BIT 2: ftp BIT 3: web BIT 4: icmp BIT 5: not support BIT 6: snmp. | ||||
| CsecuredClientEnable | 1.3.6.1.4.1.6321.1.2.3.2.11.5.2.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable the entry.
| ||||
| NextAlarm | 1.3.6.1.4.1.6321.1.2.3.2.11.8 | |||
| TextAlarmTable | 1.3.6.1.4.1.6321.1.2.3.2.11.8.1 | NA | ||
table · not-accessible · current A table that contains external alarm information. | ||||
| RextAlarmEntry | 1.3.6.1.4.1.6321.1.2.3.2.11.8.1.1 | NA | ||
| CextAlarmIndex | 1.3.6.1.4.1.6321.1.2.3.2.11.8.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The index of the entry. | ||||
| CextAlarmname | 1.3.6.1.4.1.6321.1.2.3.2.11.8.1.1.2 | DisplayString (SIZE (1..31)) | RW | |
column · DisplayString (SIZE (1..31)) · read-write · current The external alarm name. | ||||
| CextAlarmstatus | 1.3.6.1.4.1.6321.1.2.3.2.11.8.1.1.3 | DisplayString (SIZE (1..31)) | RO | |
column · DisplayString (SIZE (1..31)) · read-only · current Dispaly 'Normal' or 'Alarm' string | ||||
| CextAlarmTriggeredMode | 1.3.6.1.4.1.6321.1.2.3.2.11.8.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The external alarm triggered mode.
| ||||
| Nuser | 1.3.6.1.4.1.6321.1.2.3.2.11.9 | |||
| SuserAuthMode | 1.3.6.1.4.1.6321.1.2.3.2.11.9.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current User authentication procsssing mode.
| ||||
| SuserAuthServerIp | 1.3.6.1.4.1.6321.1.2.3.2.11.9.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of the authentication server. | ||||
| SuserAuthServerPort | 1.3.6.1.4.1.6321.1.2.3.2.11.9.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current The port of the authentication server. | ||||
| SuserAuthServerSecret | 1.3.6.1.4.1.6321.1.2.3.2.11.9.4 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The secret between the authentication server and the NE for authentication process. | ||||
| TuserTable | 1.3.6.1.4.1.6321.1.2.3.2.11.9.5 | NA | ||
table · not-accessible · current A table that contains user information. | ||||
| RuserEntry | 1.3.6.1.4.1.6321.1.2.3.2.11.9.5.1 | NA | ||
| CuserName | 1.3.6.1.4.1.6321.1.2.3.2.11.9.5.1.1 | DisplayString | RO | |
column · DisplayString · read-only · current The user name. | ||||
| CuserPassword | 1.3.6.1.4.1.6321.1.2.3.2.11.9.5.1.2 | DisplayString | RC | |
column · DisplayString · read-create · current The user password. | ||||
| CuserPriviledge | 1.3.6.1.4.1.6321.1.2.3.2.11.9.5.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The user priviledge to decide what operation the user can and cannot do.
| ||||
| CuserRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.11.9.5.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The row status used to create or delete a user. | ||||
| SuserAuthDefaultPriviledge | 1.3.6.1.4.1.6321.1.2.3.2.11.9.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The user default priviledge to be assigned when radius authentication succeds but no user priviledge information(radius service-type) is provided.
| ||||
| NusbCastCtrl | 1.3.6.1.4.1.6321.1.2.3.2.11.10 | |||
| SusBcastCtrlEnable | 1.3.6.1.4.1.6321.1.2.3.2.11.10.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable upstream broadcast control.
| ||||
| SusBcastCtrlRate | 1.3.6.1.4.1.6321.1.2.3.2.11.10.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current 32~49984 in step of 32kbps
| ||||
| NdsbCastCtrl | 1.3.6.1.4.1.6321.1.2.3.2.11.11 | |||
| SdsBcastCtrlEnable | 1.3.6.1.4.1.6321.1.2.3.2.11.11.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable downstream broadcast control.
| ||||
| SdsBcastCtrlRate | 1.3.6.1.4.1.6321.1.2.3.2.11.11.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current 32~1000000 in step of 32 kbps
| ||||
| SstdioTimeout | 1.3.6.1.4.1.6321.1.2.3.2.11.12 | INTEGER (0..300) | RW | |
scalar · INTEGER (0..300) · read-write · current Set the CLI/TELNET/WEB Session timeout, 0, or 1~300 minutes, 0 => disable. | ||||
| SisConfigChanged | 1.3.6.1.4.1.6321.1.2.3.2.11.13 | INTEGER | RO | |
scalar · INTEGER · read-only · current If system configuration has been changed.
| ||||
| NfwUpgrade | 1.3.6.1.4.1.6321.1.2.3.2.11.14 | |||
| SfwUpgradeVersion | 1.3.6.1.4.1.6321.1.2.3.2.11.14.1 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current Configure the target firmware version that will be upgraded. | ||||
| SfwUpgradeCheck | 1.3.6.1.4.1.6321.1.2.3.2.11.14.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable firmware upgrade version checking feature.
| ||||
| SfwUpgradeStatus | 1.3.6.1.4.1.6321.1.2.3.2.11.14.3 | DisplayString | RO | |
scalar · DisplayString · read-only · current Display current firmware upgrade status. | ||||
| NdelayedReboot | 1.3.6.1.4.1.6321.1.2.3.2.11.15 | |||
| SdelayedRebootTimer | 1.3.6.1.4.1.6321.1.2.3.2.11.15.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current 5~1800 secs, 0: reboot immediately.
| ||||
| SdelayedRebootRemainingTime | 1.3.6.1.4.1.6321.1.2.3.2.11.15.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current Display the remaining time of scheduled reboot.
| ||||
| SdelayedRebootCancel | 1.3.6.1.4.1.6321.1.2.3.2.11.15.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current cancel the scheduled reboot.
| ||||
| Ntrap | 1.3.6.1.4.1.6321.1.2.3.2.12 | |||
| Nstatistics | 1.3.6.1.4.1.6321.1.2.3.2.13 | |||
| SigmpQueryCntTotal | 1.3.6.1.4.1.6321.1.2.3.2.13.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of IGMP query messages received. | ||||
| SigmpReportCntTotal | 1.3.6.1.4.1.6321.1.2.3.2.13.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of IGMP report messages received. | ||||
| SigmpLeaveCntTotal | 1.3.6.1.4.1.6321.1.2.3.2.13.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of IGMP leave messages received. | ||||
| SigmpNumOfActiveGroups | 1.3.6.1.4.1.6321.1.2.3.2.13.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current The total number of IGMP learned groups. | ||||
| TigmpGroupTable | 1.3.6.1.4.1.6321.1.2.3.2.13.5 | NA | ||
table · not-accessible · current This table includes igmp group information. | ||||
| RigmpGroupEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.5.1 | NA | ||
| CigmpGroupIp | 1.3.6.1.4.1.6321.1.2.3.2.13.5.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current igmp group IP | ||||
| CigmpGroupvid | 1.3.6.1.4.1.6321.1.2.3.2.13.5.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current vlan id | ||||
| CigmpGroupnumberOfMembers | 1.3.6.1.4.1.6321.1.2.3.2.13.5.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current number Of Members | ||||
| CigmpGroupMemberPorts | 1.3.6.1.4.1.6321.1.2.3.2.13.5.1.4 | PortList | RO | |
column · PortList · read-only · current Group Member Ports | ||||
| TigmpGroupPortTable | 1.3.6.1.4.1.6321.1.2.3.2.13.6 | NA | ||
table · not-accessible · current This table includes igmp Group port information. | ||||
| RigmpGroupPortEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.6.1 | NA | ||
row · not-accessible · current An entry in igmpGroupPortTable. | ||||
| CigmpGroupPortIp | 1.3.6.1.4.1.6321.1.2.3.2.13.6.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current Igmp Group IP | ||||
| CigmpGroupPortvid | 1.3.6.1.4.1.6321.1.2.3.2.13.6.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Igmp Group vid | ||||
| TigmpGroupV2Table | 1.3.6.1.4.1.6321.1.2.3.2.13.7 | NA | ||
table · not-accessible · current A table that displays IGMP learned group member information. | ||||
| RigmpGroupV2Entry | 1.3.6.1.4.1.6321.1.2.3.2.13.7.1 | NA | ||
| CigmpGroupV2Vid | 1.3.6.1.4.1.6321.1.2.3.2.13.7.1.1 | VlanIndex | RO | |
column · VlanIndex · read-only · current The IGMP group VLAN ID. | ||||
| CigmpGroupV2Ip | 1.3.6.1.4.1.6321.1.2.3.2.13.7.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The multicast IP address. | ||||
| CigmpGroupV2NumOfMembers | 1.3.6.1.4.1.6321.1.2.3.2.13.7.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The number of member ports in the group. | ||||
| CigmpGroupV2MemberPorts | 1.3.6.1.4.1.6321.1.2.3.2.13.7.1.4 | PortList | RO | |
column · PortList · read-only · current The member port list of the group. | ||||
| TigmpGroupPortV2Table | 1.3.6.1.4.1.6321.1.2.3.2.13.8 | NA | ||
table · not-accessible · current A table that displays IGMP joined groups in this port. | ||||
| RigmpGroupPortV2Entry | 1.3.6.1.4.1.6321.1.2.3.2.13.8.1 | NA | ||
row · not-accessible · current An entry of igmpGroupPortV2Table. | ||||
| CigmpGroupPortV2Vid | 1.3.6.1.4.1.6321.1.2.3.2.13.8.1.1 | VlanIndex | RO | |
column · VlanIndex · read-only · current The IGMP group VLAN ID. | ||||
| CigmpGroupPortV2Ip | 1.3.6.1.4.1.6321.1.2.3.2.13.8.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The multicast IP address. | ||||
| CigmpGroupPortV2SourceIp | 1.3.6.1.4.1.6321.1.2.3.2.13.8.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The source IP address that joins the IGMP group. | ||||
| TigmpPortCtrlPduTable | 1.3.6.1.4.1.6321.1.2.3.2.13.9 | NA | ||
table · not-accessible · current A table that displays IGMP related counter values in this port. | ||||
| RigmpPortCtrlPduEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.9.1 | NA | ||
| CigmpPortCtrlPduQueryCnt | 1.3.6.1.4.1.6321.1.2.3.2.13.9.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP query messages received in this port. | ||||
| CigmpPortCtrlPduReportCnt | 1.3.6.1.4.1.6321.1.2.3.2.13.9.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP report messages received in this port. | ||||
| CigmpPortCtrlPduLeaveCnt | 1.3.6.1.4.1.6321.1.2.3.2.13.9.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP leave messages received in this port. | ||||
| CigmpPortNumOfActiveGroups | 1.3.6.1.4.1.6321.1.2.3.2.13.9.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The total number of active IGMP groups in this port. | ||||
| CigmpPortCtrlAuditLeaveCnt | 1.3.6.1.4.1.6321.1.2.3.2.13.9.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of groups left by audit query. | ||||
| NdhcpStats | 1.3.6.1.4.1.6321.1.2.3.2.13.11 | |||
| TdhcpSnoopIpTable | 1.3.6.1.4.1.6321.1.2.3.2.13.11.1 | NA | ||
table · not-accessible · current This table shows the IP addresses and netmasks offered by the DHCP server. | ||||
| RdhcpSnoopIpEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.11.1.1 | NA | ||
| CdhcpSnoopIp | 1.3.6.1.4.1.6321.1.2.3.2.13.11.1.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The snooped IP address. | ||||
| CdhcpSnoopMac | 1.3.6.1.4.1.6321.1.2.3.2.13.11.1.1.2 | PhysAddress | RO | |
column · PhysAddress · read-only · current The snooped MAC address. | ||||
| CdhcpSnoopVid | 1.3.6.1.4.1.6321.1.2.3.2.13.11.1.1.3 | VlanIndex | RO | |
column · VlanIndex · read-only · current The snooped VLAN ID. | ||||
| CdhcpSnoopMask | 1.3.6.1.4.1.6321.1.2.3.2.13.11.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The snooped IP mask | ||||
| CdhcpSnoopGateway | 1.3.6.1.4.1.6321.1.2.3.2.13.11.1.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current The snooped Gateway. | ||||
| CdhcpSnoopRouteMap | 1.3.6.1.4.1.6321.1.2.3.2.13.11.1.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The refrence bit map of the dhcp route | ||||
| TdhcpSnoopCounterTable | 1.3.6.1.4.1.6321.1.2.3.2.13.11.2 | NA | ||
table · not-accessible · current This table shows the DHCP statistics. | ||||
| RdhcpSnoopCounterEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.11.2.1 | NA | ||
| CdhcpDiscovery | 1.3.6.1.4.1.6321.1.2.3.2.13.11.2.1.1 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of received DHCP server discovery packets. | ||||
| CdhcpOffer | 1.3.6.1.4.1.6321.1.2.3.2.13.11.2.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of received DHCP server offer packets. | ||||
| CdhcpRequest | 1.3.6.1.4.1.6321.1.2.3.2.13.11.2.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of received DHCP IP request packets. | ||||
| CdhcpAck | 1.3.6.1.4.1.6321.1.2.3.2.13.11.2.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of received DHCP IP acknowledge packets. | ||||
| CdhcpAckBySnoopFull | 1.3.6.1.4.1.6321.1.2.3.2.13.11.2.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of received DHCP IP acknowledge packets that replace the oldest snooping entry in snooping table due to table full. | ||||
| TdhcpRouteTable | 1.3.6.1.4.1.6321.1.2.3.2.13.11.3 | NA | ||
table · not-accessible · current A table that contains dhcp route information. | ||||
| RdhcpRouteEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.11.3.1 | NA | ||
| CdhcpRouteIndex | 1.3.6.1.4.1.6321.1.2.3.2.13.11.3.1.1 | INTEGER (1..24) | RO | |
| CdhcpRouteVid | 1.3.6.1.4.1.6321.1.2.3.2.13.11.3.1.2 | VlanIndex | RO | |
column · VlanIndex · read-only · current The VLAN-ID refering to this dhcp route. | ||||
| CdhcpRouteIP | 1.3.6.1.4.1.6321.1.2.3.2.13.11.3.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current IP of this dhcp route | ||||
| CdhcpRouteMask | 1.3.6.1.4.1.6321.1.2.3.2.13.11.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The subnet mask of source IP mask. | ||||
| CdhcpRouteGwIP | 1.3.6.1.4.1.6321.1.2.3.2.13.11.3.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current The gateway IP address. | ||||
| NpaepvcStats | 1.3.6.1.4.1.6321.1.2.3.2.13.12 | |||
| TpaepvcSessionTable | 1.3.6.1.4.1.6321.1.2.3.2.13.12.1 | NA | ||
table · not-accessible · current This table shows the paepvc session statistics. | ||||
| RpaepvcSessionEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.12.1.1 | NA | ||
row · not-accessible · current An entry of paepvcSessionTable. | ||||
| CpaepvcSessionVpi | 1.3.6.1.4.1.6321.1.2.3.2.13.12.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The PAEPVC VPI. | ||||
| CpaepvcSessionVci | 1.3.6.1.4.1.6321.1.2.3.2.13.12.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The PAEPVC VCI. | ||||
| CpaepvcSessionState | 1.3.6.1.4.1.6321.1.2.3.2.13.12.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The PAEPVC status.
| ||||
| CpaepvcSessionId | 1.3.6.1.4.1.6321.1.2.3.2.13.12.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The PAEPVC session ID. | ||||
| CpaepvcSessionUptime | 1.3.6.1.4.1.6321.1.2.3.2.13.12.1.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The PAEPVC session uptime.
| ||||
| CpaepvcSessionacname | 1.3.6.1.4.1.6321.1.2.3.2.13.12.1.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Access concentrator name. | ||||
| CpaepvcSessionsrvcname | 1.3.6.1.4.1.6321.1.2.3.2.13.12.1.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current Service name. | ||||
| TpaepvcCountTable | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2 | NA | ||
table · not-accessible · current This table shows the paepvc counters. | ||||
| RpaepvcCountEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1 | NA | ||
row · not-accessible · current An entry of paepvcCountTable.
| ||||
| CpaepvcCountVpi | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The PAEPVC VPI. | ||||
| CpaepvcCountVci | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The PAEPVC VCI. | ||||
| CpaepvcCountPppLcpCfgReqRx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of ppp lcp config-request received. | ||||
| CpaepvcCountPppLcpEchoReqRx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of ppp lcp echo-request received. | ||||
| CpaepvcCountPppLcpEchoReplyRx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of ppp lcp echo-reply received. | ||||
| CpaepvcCountPadiTx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe padi transfered | ||||
| CpaepvcCountPadoRx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe pado received | ||||
| CpaepvcCountPadrTx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe padr transfered | ||||
| CpaepvcCountPadsRx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe pads received | ||||
| CpaepvcCountPadtTx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.10 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe padt transfered | ||||
| CpaepvcCountPadtRx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe padt received | ||||
| CpaepvcCountSrvcnameErrRx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe service name error received | ||||
| CpaepvcCountAcSystemErrRx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.13 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe access concentrator name error received | ||||
| CpaepvcCountGenericErrTx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.14 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe generic error transfered | ||||
| CpaepvcCountGenericErrRx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.15 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe generic error received | ||||
| NmacStats | 1.3.6.1.4.1.6321.1.2.3.2.13.13 | |||
| SmacDisplayTarget | 1.3.6.1.4.1.6321.1.2.3.2.13.13.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This managed object is a filter used for identify the target from which the MAC addresses are learned in macTable. The target could be: 99: all ports in the system 98: all subscriber ports 97: all Ethernet ports IfIndex is used for identifying subscriber ports and Ethernet Ports(e.g. 1 ~ 50). | ||||
| TmacTable | 1.3.6.1.4.1.6321.1.2.3.2.13.13.2 | NA | ||
table · not-accessible · current A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame. | ||||
| RmacEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.13.2.1 | NA | ||
| CmacAddress | 1.3.6.1.4.1.6321.1.2.3.2.13.13.2.1.1 | MacAddress | RO | |
column · MacAddress · read-only · current A unicast MAC address for which the bridge has forwarding and/or filtering information. | ||||
| CmacPort | 1.3.6.1.4.1.6321.1.2.3.2.13.13.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The port from which the mac address has been learned. | ||||
| CmacStatus | 1.3.6.1.4.1.6321.1.2.3.2.13.13.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The status of this entry.
| ||||
| NipbpvcStats | 1.3.6.1.4.1.6321.1.2.3.2.13.14 | |||
| TarpproxyTable | 1.3.6.1.4.1.6321.1.2.3.2.13.14.1 | NA | ||
table · not-accessible · current Display ARP table. This table is supported by R3.00 and later versions. | ||||
| RarpproxyEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.14.1.1 | NA | ||
| CarpproxyIp | 1.3.6.1.4.1.6321.1.2.3.2.13.14.1.1.1 | IpAddress | RO | |
| CarpproxyMac | 1.3.6.1.4.1.6321.1.2.3.2.13.14.1.1.2 | MacAddress | RO | |
| CarpproxyIfIndex | 1.3.6.1.4.1.6321.1.2.3.2.13.14.1.1.3 | INTEGER | RO | |
| CarpproxyVpi | 1.3.6.1.4.1.6321.1.2.3.2.13.14.1.1.4 | INTEGER | RO | |
| CarpproxyVci | 1.3.6.1.4.1.6321.1.2.3.2.13.14.1.1.5 | INTEGER | RO | |
| CarpproxyInterfaceIp | 1.3.6.1.4.1.6321.1.2.3.2.13.14.1.1.6 | IpAddress | RO | |
| CarpproxyInterfaceMask | 1.3.6.1.4.1.6321.1.2.3.2.13.14.1.1.7 | INTEGER | RO | |
| CarpproxyInterfaceVid | 1.3.6.1.4.1.6321.1.2.3.2.13.14.1.1.8 | VlanIndex | RO | |
| CarpproxyDhcpIp | 1.3.6.1.4.1.6321.1.2.3.2.13.14.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| CarpproxyType | 1.3.6.1.4.1.6321.1.2.3.2.13.14.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| TipbpvcIfDynamicTable | 1.3.6.1.4.1.6321.1.2.3.2.13.14.2 | NA | ||
table · not-accessible · current Display runtime interfaces. This table is supported by R3.00 and later versions. | ||||
| RipbpvcIfDynamicEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.14.2.1 | NA | ||
row · not-accessible · current An entry of ipbpvcIfDynamicTable. | ||||
| CipbpvcIfDynamicIp | 1.3.6.1.4.1.6321.1.2.3.2.13.14.2.1.1 | IpAddress | RO | |
| CipbpvcIfDynamicMask | 1.3.6.1.4.1.6321.1.2.3.2.13.14.2.1.2 | INTEGER | RO | |
| CipbpvcIfDynamicIfIndex | 1.3.6.1.4.1.6321.1.2.3.2.13.14.2.1.3 | INTEGER | RO | |
| CipbpvcIfDynamicVpi | 1.3.6.1.4.1.6321.1.2.3.2.13.14.2.1.4 | INTEGER | RO | |
| CipbpvcIfDynamicVci | 1.3.6.1.4.1.6321.1.2.3.2.13.14.2.1.5 | INTEGER | RO | |
| TipbpvcRouteDynamicTable | 1.3.6.1.4.1.6321.1.2.3.2.13.14.3 | NA | ||
table · not-accessible · current Display runtime routing table. This table is supported by R3.00 and later versions. | ||||
| RipbpvcRouteDynamicEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.14.3.1 | NA | ||
row · not-accessible · current An entry of ipbpvcRouteDynamicTable. | ||||
| CipbpvcRouteDynamicType | 1.3.6.1.4.1.6321.1.2.3.2.13.14.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| CipbpvcRouteDynamicIp | 1.3.6.1.4.1.6321.1.2.3.2.13.14.3.1.2 | IpAddress | RO | |
| CipbpvcRouteDynamicMask | 1.3.6.1.4.1.6321.1.2.3.2.13.14.3.1.3 | INTEGER | RO | |
| CipbpvcRouteDynamicNextHop | 1.3.6.1.4.1.6321.1.2.3.2.13.14.3.1.4 | IpAddress | RO | |
| CipbpvcRouteDynamicMetric | 1.3.6.1.4.1.6321.1.2.3.2.13.14.3.1.5 | INTEGER | RO | |
| CipbpvcRouteDynamicPriority | 1.3.6.1.4.1.6321.1.2.3.2.13.14.3.1.6 | INTEGER | RO | |
| NvoipStats | 1.3.6.1.4.1.6321.1.2.3.2.13.15 | |||
| TvoipLineStatusTable | 1.3.6.1.4.1.6321.1.2.3.2.13.15.1 | NA | ||
table · not-accessible · current The table displays VoIP line status. | ||||
| RvoipLineStatusEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.15.1.1 | NA | ||
| CvoipLineStatusPhoneStatus | 1.3.6.1.4.1.6321.1.2.3.2.13.15.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Phone status of the line.
| ||||
| CvoipLineStatusServiceStatus | 1.3.6.1.4.1.6321.1.2.3.2.13.15.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Service status of the line.
| ||||
| TvoipLineInfoTable | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2 | NA | ||
table · not-accessible · current The table displays VoIP line information. | ||||
| RvoipLineInfoEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1 | NA | ||
| CvoipLineInfoSipLocalUri | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.1 | OCTET STRING | RO | |
| CvoipLineInfoSipRemoteUri | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.2 | OCTET STRING | RO | |
| CvoipLineInfoRtpTxCodecType | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.3 | OCTET STRING | RO | |
| CvoipLineInfoRtpRxCodecType | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.4 | OCTET STRING | RO | |
| CvoipLineInfoRtpTxPt | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.5 | INTEGER | RO | |
| CvoipLineInfoRtpRxPt | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.6 | INTEGER | RO | |
| CvoipLineInfoRtpLocalIp | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.7 | IpAddress | RO | |
| CvoipLineInfoRtpRemoteIp | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.8 | IpAddress | RO | |
| CvoipLineInfoRtpLocalPort | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.9 | INTEGER | RO | |
| CvoipLineInfoRtpRemotePort | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.10 | INTEGER | RO | |
| CvoipLineInfoSipLocalUri2 | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.11 | OCTET STRING | RO | |
| CvoipLineInfoSipRemoteUri2 | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.12 | OCTET STRING | RO | |
| CvoipLineInfoRtpTxCodecType2 | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.13 | OCTET STRING | RO | |
| CvoipLineInfoRtpRxCodecType2 | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.14 | OCTET STRING | RO | |
| CvoipLineInfoRtpTxPt2 | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.15 | INTEGER | RO | |
| CvoipLineInfoRtpRxPt2 | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.16 | INTEGER | RO | |
| CvoipLineInfoRtpLocalIp2 | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.17 | IpAddress | RO | |
| CvoipLineInfoRtpRemoteIp2 | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.18 | IpAddress | RO | |
| CvoipLineInfoRtpLocalPort2 | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.19 | INTEGER | RO | |
| CvoipLineInfoRtpRemotePort2 | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.20 | INTEGER | RO | |
| NvoipH248Status | 1.3.6.1.4.1.6321.1.2.3.2.13.15.3 | |||
| SvoipH248StatusMgName | 1.3.6.1.4.1.6321.1.2.3.2.13.15.3.1 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current MG name. | ||||
| SvoipH248StatusMgStatus | 1.3.6.1.4.1.6321.1.2.3.2.13.15.3.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current Mg connection status.
| ||||
| NvoipActiveCallStat | 1.3.6.1.4.1.6321.1.2.3.2.13.15.4 | |||
| SvoipActiveCallStatCurrentActiveCalls | 1.3.6.1.4.1.6321.1.2.3.2.13.15.4.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Number of current active calls. | ||||
| SvoipActiveCallStatFailAttempts | 1.3.6.1.4.1.6321.1.2.3.2.13.15.4.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current Failed attempts to setup active call. | ||||
| NmacffStats | 1.3.6.1.4.1.6321.1.2.3.2.13.16 | |||
| TmacFfStatsTable | 1.3.6.1.4.1.6321.1.2.3.2.13.16.1 | NA | ||
table · not-accessible · current A table that contains MAC Force Forwarding static configuration and dynamic information. | ||||
| RmacFfStatsEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.16.1.1 | NA | ||
| CmacFfStatsIndex | 1.3.6.1.4.1.6321.1.2.3.2.13.16.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Index of the MACFF. | ||||
| CmacFfStatsVid | 1.3.6.1.4.1.6321.1.2.3.2.13.16.1.1.2 | VlanIndex | RO | |
column · VlanIndex · read-only · current The VLAN-ID refering to this AR/AS. | ||||
| CmacFfStatsArIP | 1.3.6.1.4.1.6321.1.2.3.2.13.16.1.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current IP of this AR/AS | ||||
| CmacFfStatsSrcIP | 1.3.6.1.4.1.6321.1.2.3.2.13.16.1.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The source IP address of the MACFF. | ||||
| CmacFfStatsSrcMask | 1.3.6.1.4.1.6321.1.2.3.2.13.16.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The subnet mask of source IP mask. | ||||
| TmacFfArpTable | 1.3.6.1.4.1.6321.1.2.3.2.13.16.2 | NA | ||
table · not-accessible · current A table that contains MAC Force Forwarding ARP information. | ||||
| RmacFfArpEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.16.2.1 | NA | ||
| CmacFfArpVid | 1.3.6.1.4.1.6321.1.2.3.2.13.16.2.1.1 | VlanIndex | RO | |
column · VlanIndex · read-only · current The VLAN-ID refering to this AR/AS. | ||||
| CmacFfArpIP | 1.3.6.1.4.1.6321.1.2.3.2.13.16.2.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current IP of this AR/AS. | ||||
| CmacFfArpPort | 1.3.6.1.4.1.6321.1.2.3.2.13.16.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Port of this AR/AS. | ||||
| CmacFfArpMac | 1.3.6.1.4.1.6321.1.2.3.2.13.16.2.1.4 | PhysAddress | RO | |
column · PhysAddress · read-only · current MAC address of the AR or AS. | ||||
| TmacFfArpCounterTable | 1.3.6.1.4.1.6321.1.2.3.2.13.16.3 | NA | ||
table · not-accessible · current A table that contains MAC Force Forwarding ARP counter information. | ||||
| RmacFfArpCounterEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.16.3.1 | NA | ||
| CmacFfArpCounterRequestTX | 1.3.6.1.4.1.6321.1.2.3.2.13.16.3.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current ARP Request TX counter. | ||||
| CmacFfArpCounterRequestRX | 1.3.6.1.4.1.6321.1.2.3.2.13.16.3.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current ARP Request RX counter. | ||||
| CmacFfArpCounterRequestRXDrop | 1.3.6.1.4.1.6321.1.2.3.2.13.16.3.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current ARP Request RX drop counter. | ||||
| CmacFfArpCounterReplyTX | 1.3.6.1.4.1.6321.1.2.3.2.13.16.3.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current ARP Reply TX counter. | ||||
| CmacFfArpCounterReplyRX | 1.3.6.1.4.1.6321.1.2.3.2.13.16.3.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current ARP Reply RX counter. | ||||
| CmacFfArpCounterReplyRXDrop | 1.3.6.1.4.1.6321.1.2.3.2.13.16.3.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current ARP Reply RX drop counter. | ||||
| NenetStats | 1.3.6.1.4.1.6321.1.2.3.2.13.17 | |||
| TenetSfpInfoTable | 1.3.6.1.4.1.6321.1.2.3.2.13.17.2 | NA | ||
table · not-accessible · current This table includes sfp info of enet port. | ||||
| RenetSfpInfoEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.17.2.1 | NA | ||
| CenetSfpInfoTxpower | 1.3.6.1.4.1.6321.1.2.3.2.13.17.2.1.1 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Measured Tx Output Power.
| ||||
| CenetSfpInfoRxpower | 1.3.6.1.4.1.6321.1.2.3.2.13.17.2.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Measured Rx Output Power.
| ||||
| CenetSfpInfoTemperature | 1.3.6.1.4.1.6321.1.2.3.2.13.17.2.1.3 | INTEGER (-1280000..1280000) | RO | |
column · INTEGER (-1280000..1280000) · read-only · current Measured temperature.
| ||||
| CenetSfpInfoTxBias | 1.3.6.1.4.1.6321.1.2.3.2.13.17.2.1.4 | INTEGER (0..131000) | RO | |
column · INTEGER (0..131000) · read-only · current Measured tx bias.
| ||||
| CenetSfpInfoVoltage | 1.3.6.1.4.1.6321.1.2.3.2.13.17.2.1.5 | INTEGER (0..65000) | RO | |
column · INTEGER (0..65000) · read-only · current Measured voltage.
| ||||
| NadslStats | 1.3.6.1.4.1.6321.1.2.3.2.13.18 | |||
| TadslPortUtilTable | 1.3.6.1.4.1.6321.1.2.3.2.13.18.1 | NA | ||
table · not-accessible · current This table includes adsl port utilization. | ||||
| RadslPortUtilEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.18.1.1 | NA | ||
| CadslPortUtilTx | 1.3.6.1.4.1.6321.1.2.3.2.13.18.1.1.1 | INTEGER (0..100) | RO | |
column · INTEGER (0..100) · read-only · current Measure adsl port's tx utilization. | ||||
| CadslPortUtilRx | 1.3.6.1.4.1.6321.1.2.3.2.13.18.1.1.2 | INTEGER (0..100) | RO | |
column · INTEGER (0..100) · read-only · current Measure adsl port's rx utilization. | ||||
| Nclear | 1.3.6.1.4.1.6321.1.2.3.2.14 | |||
| ScounterClearTarget | 1.3.6.1.4.1.6321.1.2.3.2.14.1 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current This managed object is used for identify the target on which
the counter would be cleared. The target is encoded as:
Byte 1: reserved
Byte 2~3: reserved
Byte 4: reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc. | ||||
| ScounterClearOps | 1.3.6.1.4.1.6321.1.2.3.2.14.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: clear interface counters BIT 2: clear pvc packet counters BIT 3: clear port ATM counters BIT 4: clear pvc ATM counters BIT 5: clear DHCP counters BIT 6: clear IGMP counters BIT 7: clear IGMP port counters BIT 8: clear MACFF ARP counters BIT 9: clear current lineperf BIT 10: clear current 15 minute lineperf BIT 11: clear current 1 day lineperf | ||||
| ScounterClearVpi | 1.3.6.1.4.1.6321.1.2.3.2.14.3 | INTEGER (0..255) | RW | |
scalar · INTEGER (0..255) · read-write · current VPI of the pvc whose counters would be cleared. | ||||
| ScounterClearVci | 1.3.6.1.4.1.6321.1.2.3.2.14.4 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current VCI of the pvc whose counters would be cleared. | ||||
| Nvoip | 1.3.6.1.4.1.6321.1.2.3.2.16 | |||
| NvoipArp | 1.3.6.1.4.1.6321.1.2.3.2.16.1 | |||
| SvoipArpFlushOps | 1.3.6.1.4.1.6321.1.2.3.2.16.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set the object to 1 to start flushing. | ||||
| TvoipArpShowTable | 1.3.6.1.4.1.6321.1.2.3.2.16.1.2 | NA | ||
table · not-accessible · current Display ARP entries learnt in specified slot. | ||||
| RvoipArpShowEntry | 1.3.6.1.4.1.6321.1.2.3.2.16.1.2.1 | NA | ||
| CvoipArpShowIp | 1.3.6.1.4.1.6321.1.2.3.2.16.1.2.1.1 | IpAddress | RO | |
| CvoipArpShowMac | 1.3.6.1.4.1.6321.1.2.3.2.16.1.2.1.2 | PhysAddress | RO | |
| NvoipSip | 1.3.6.1.4.1.6321.1.2.3.2.16.2 | |||
| SmaxNumOfVoipNumberPlan | 1.3.6.1.4.1.6321.1.2.3.2.16.2.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of VoIP number plan supported by the system. | ||||
| TvoipNumberPlanTable | 1.3.6.1.4.1.6321.1.2.3.2.16.2.2 | NA | ||
table · not-accessible · current Configure numbering plan entry of specified index in specified payphone charging table. | ||||
| RvoipNumberPlanEntry | 1.3.6.1.4.1.6321.1.2.3.2.16.2.2.1 | NA | ||
row · not-accessible · current An entry of voipNumberPlanTable. | ||||
| CvoipNumberPlanName | 1.3.6.1.4.1.6321.1.2.3.2.16.2.2.1.1 | DisplayString (SIZE (1..31)) | RO | |
column · DisplayString (SIZE (1..31)) · read-only · current Numbering plan table name. | ||||
| CvoipNumberPlanIndex | 1.3.6.1.4.1.6321.1.2.3.2.16.2.2.1.2 | INTEGER (1..32) | RO | |
| CvoipNumberPlanPattern | 1.3.6.1.4.1.6321.1.2.3.2.16.2.2.1.3 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current Allowed characters are 0~9, *, T, S, P, x, ., |
and range format characters that include '~', ','
and parenthesis '(', ')', brackets '[', ']', braces '{', '}'
and at most one parenthesis pair are allowed,
Examples: '002(*)', '0(*)', and '(*)'.
'*' represents one or more digit characters
'x' represents any digit character
'T' timeout send of dial string, can only appear at the end of pattern
'S' star phone key (*) match character in dial plan
'P' pound key (#) match character in dial plan
'.' represents zero or more repetitions of character or range
that precedes it, can't use the dot character '.' in brackets
'|' used to separate multiple number plan patterns
[n~m,k] match a range of digits n~m or a specified digit k,
'[' and ']' must pair and nest brackets is illegal
'~' and ',' are allowed showing in brackets only
'~' connected characters must be digit
{n} match n digits | ||||
| CvoipNumberPlanRule | 1.3.6.1.4.1.6321.1.2.3.2.16.2.2.1.4 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current Allowed characters are 0~9, and '\c' stand for country code, '\d' stand for national destination code, '\1' stand for matched string enclosed by the parenthesis pair, '\n' stand for no local disconnect '\p' stand for partial pattern '\t' stand for confirmation tone play '\tr' stand for recall dial tone play 'deny' stand for the pattern specified is not allowed. Examples: '\1', '\c\1', and '\c\d\1'. | ||||
| CvoipNumberPlanRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.16.2.2.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new entry or delete an existing entry in this table. | ||||
| TvoipNumberPlanDftTable | 1.3.6.1.4.1.6321.1.2.3.2.16.2.3 | NA | ||
table · not-accessible · current Configure the action rule after inter-digit timeout in specified entry of numbering plan table. | ||||
| RvoipNumberPlanDftEntry | 1.3.6.1.4.1.6321.1.2.3.2.16.2.3.1 | NA | ||
| CvoipNumberPlanDftRule | 1.3.6.1.4.1.6321.1.2.3.2.16.2.3.1.1 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current Allowed characters are 0~9, and '\c' stand for country code, '\d' stand for national destination code, '\1' stand for matched string enclosed by the parenthesis pair, '\n' stand for no local disconnect '\p' stand for partial pattern '\t' stand for confirmation tone play 'deny' stand for the pattern specified is not allowed. Examples: '\1', '\c\1', and '\c\d\1'. | ||||
| NdigitSetup | 1.3.6.1.4.1.6321.1.2.3.2.16.2.4 | |||
| NtimeoutSetup | 1.3.6.1.4.1.6321.1.2.3.2.16.2.4.1 | |||
| SinitialTimeout | 1.3.6.1.4.1.6321.1.2.3.2.16.2.4.1.1 | INTEGER (1..20) | RW | |
scalar · INTEGER (1..20) · read-write · current First digit must be dialed before this timeout, 1 ~ 20 seconds. | ||||
| SinterDigitTimeout | 1.3.6.1.4.1.6321.1.2.3.2.16.2.4.1.2 | INTEGER (1..20) | RW | |
scalar · INTEGER (1..20) · read-write · current If no pattern string is fully matched, the inter-digit timeout will trigger device to send out current dialed digits, 1 ~ 20 seconds. | ||||
| SdigitPauseTimeout | 1.3.6.1.4.1.6321.1.2.3.2.16.2.4.1.3 | INTEGER (1..20) | RW | |
scalar · INTEGER (1..20) · read-write · current If a pattern string is end with the T pattern, the pattern string will not be matched until the timeout happens, 1 ~ 20 seconds. | ||||
| SmatchingTimeout | 1.3.6.1.4.1.6321.1.2.3.2.16.2.4.1.4 | INTEGER (1..20) | RW | |
scalar · INTEGER (1..20) · read-write · current If a pattern string is fully matched, and there are other pattern strings partially matched, the pattern string will be sent out if the timeout happens, 1 ~ 20 seconds. | ||||
| NvoipIp | 1.3.6.1.4.1.6321.1.2.3.2.16.3 | |||
| SvoipIpSetIp | 1.3.6.1.4.1.6321.1.2.3.2.16.3.1 | IpAddress | RW | |
scalar · IpAddress · read-write · current VoIP's IP address. | ||||
| SvoipIpSetVid | 1.3.6.1.4.1.6321.1.2.3.2.16.3.2 | VlanIndex | RW | |
scalar · VlanIndex · read-write · current VoIP's VLAN ID. | ||||
| SvoipIpSetMask | 1.3.6.1.4.1.6321.1.2.3.2.16.3.3 | INTEGER (0..32) | RW | |
scalar · INTEGER (0..32) · read-write · current VoIP's network mask. | ||||
| NvoipDns | 1.3.6.1.4.1.6321.1.2.3.2.16.4 | |||
| SvoipDnsIp | 1.3.6.1.4.1.6321.1.2.3.2.16.4.1 | IpAddress | RW | |
scalar · IpAddress · read-write · current IP address. | ||||
| SmaxNumOfVoipRoute | 1.3.6.1.4.1.6321.1.2.3.2.16.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of VoIP routing entries. | ||||
| TvoipRouteTable | 1.3.6.1.4.1.6321.1.2.3.2.16.8 | NA | ||
| RvoipRouteEntry | 1.3.6.1.4.1.6321.1.2.3.2.16.8.1 | NA | ||
row · not-accessible · current An entry of voipRouteTable. | ||||
| CvoipRouteIp | 1.3.6.1.4.1.6321.1.2.3.2.16.8.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current IP address. | ||||
| CvoipRouteGateway | 1.3.6.1.4.1.6321.1.2.3.2.16.8.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current Gateway IP. | ||||
| CvoipRouteMask | 1.3.6.1.4.1.6321.1.2.3.2.16.8.1.3 | INTEGER (0..32) | RO | |
column · INTEGER (0..32) · read-only · current Network mask. | ||||
| CvoipRouteMetric | 1.3.6.1.4.1.6321.1.2.3.2.16.8.1.4 | INTEGER (1..15) | RC | |
column · INTEGER (1..15) · read-create · current Metric number of the route. | ||||
| CvoipRouteRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.16.8.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new entry or delete an existing entry in this table. | ||||
| SvoipCountryCode | 1.3.6.1.4.1.6321.1.2.3.2.16.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Configure country (information) for VoIP services.
| ||||
| NvoipH248 | 1.3.6.1.4.1.6321.1.2.3.2.16.10 | |||
| SmaxNumOfVoipH248MgConf | 1.3.6.1.4.1.6321.1.2.3.2.16.10.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of virtual media gateway supported by the system. | ||||
| NvoipH248MgConf | 1.3.6.1.4.1.6321.1.2.3.2.16.10.2 | |||
| SvoipH248MgName | 1.3.6.1.4.1.6321.1.2.3.2.16.10.2.1 | DisplayString | RW | |
scalar · DisplayString · read-write · current MG name. | ||||
| SvoipH248MgEnable | 1.3.6.1.4.1.6321.1.2.3.2.16.10.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable MG.
| ||||
| SvoipH248MgH248Profile | 1.3.6.1.4.1.6321.1.2.3.2.16.10.2.3 | DisplayString | RW | |
scalar · DisplayString · read-write · current H248 profile name used by MG. | ||||
| SvoipH248MgPort | 1.3.6.1.4.1.6321.1.2.3.2.16.10.2.4 | INTEGER (1025..65535) | RW | |
scalar · INTEGER (1025..65535) · read-write · current Port number used by MG. | ||||
| NvoipRing | 1.3.6.1.4.1.6321.1.2.3.2.16.11 | |||
| TvoipRingTable | 1.3.6.1.4.1.6321.1.2.3.2.16.11.1 | NA | ||
| RvoipRingEntry | 1.3.6.1.4.1.6321.1.2.3.2.16.11.1.1 | NA | ||
| CvoipRingIndex | 1.3.6.1.4.1.6321.1.2.3.2.16.11.1.1.1 | INTEGER (1..16) | RO | |
| CvoipRingName | 1.3.6.1.4.1.6321.1.2.3.2.16.11.1.1.2 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current Ring identifier used in SIP Alert-Info header field | ||||
| CvoipRingOn1 | 1.3.6.1.4.1.6321.1.2.3.2.16.11.1.1.3 | INTEGER (100..10000) | RC | |
column · INTEGER (100..10000) · read-create · current first on time in milliseconds | ||||
| CvoipRingOff1 | 1.3.6.1.4.1.6321.1.2.3.2.16.11.1.1.4 | INTEGER (100..10000) | RC | |
column · INTEGER (100..10000) · read-create · current first off time in milliseconds | ||||
| CvoipRingOn2 | 1.3.6.1.4.1.6321.1.2.3.2.16.11.1.1.5 | INTEGER (100..10000) | RC | |
column · INTEGER (100..10000) · read-create · current second on time in milliseconds | ||||
| CvoipRingOff2 | 1.3.6.1.4.1.6321.1.2.3.2.16.11.1.1.6 | INTEGER (100..10000) | RC | |
column · INTEGER (100..10000) · read-create · current second off time in milliseconds | ||||
| CvoipRingOn3 | 1.3.6.1.4.1.6321.1.2.3.2.16.11.1.1.7 | INTEGER (100..10000) | RC | |
column · INTEGER (100..10000) · read-create · current third on time in milliseconds | ||||
| CvoipRingOff3 | 1.3.6.1.4.1.6321.1.2.3.2.16.11.1.1.8 | INTEGER (100..10000) | RC | |
column · INTEGER (100..10000) · read-create · current third off time in milliseconds | ||||
| SvoipRingSetDefault | 1.3.6.1.4.1.6321.1.2.3.2.16.11.2 | INTEGER (1..16) | RW | |
scalar · INTEGER (1..16) · read-write · current Set the index to default value. | ||||
| SvoipBootRegDelay | 1.3.6.1.4.1.6321.1.2.3.2.16.12 | INTEGER (0..30) | RW | |
scalar · INTEGER (0..30) · read-write · current Registration delay in seconds. | ||||
| NvoipActiveCall | 1.3.6.1.4.1.6321.1.2.3.2.16.13 | |||
| SvoipActiveCallMaxActiveCalls | 1.3.6.1.4.1.6321.1.2.3.2.16.13.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Configure maximum number of concurrent active calls, 0~96. | ||||
| SvoipActiveCallThreshold | 1.3.6.1.4.1.6321.1.2.3.2.16.13.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The threshold to report or clear alarm, 50~100. | ||||
| SvoipMode | 1.3.6.1.4.1.6321.1.2.3.2.16.100 | INTEGER | RW | |
scalar · INTEGER · read-write · current Configure the Mode for VoIP Service.
| ||||
| NaesSeriesCommon | 1.3.6.1.4.1.6321.1.2.3.2.97 | |||
| NiesSeriesCommon | 1.3.6.1.4.1.6321.1.2.3.2.98 | |||
| NaccessSwitchCommonATM | 1.3.6.1.4.1.6321.1.2.3.2.99 | |||