E5-110-IESCOMMON-MIB
Calix Networkssnmptranslate -m E5-110-IESCOMMON-MIB -Tpsnmpwalk -v2c -c <community> -m E5-110-IESCOMMON-MIB <host> 1.3.6.1.4.1.6321.1.2.3.1.0.1Imports
| E5-110-MIB | e5x110, iesSeriesCommon |
|---|---|
| IF-MIB | ifIndex |
| Q-BRIDGE-MIB | PortList |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| !reboot | 1.3.6.1.4.1.6321.1.2.3.1.0.1 | |||
notification Send a message to the manager that the system is going to reboot. The variable is the reason why the system reboots.
| ||||
| !systemShutdown | 1.3.6.1.4.1.6321.1.2.3.1.0.2 | |||
notification Send a message to the manager that the system is going to shutdown. The variable is the reason that causes the system to shutdown.
| ||||
| !overheat | 1.3.6.1.4.1.6321.1.2.3.1.0.3 | |||
notification Send a message to the manager that the system is overheated. The variable in the binding list is the current temperature in Celsius of the system. | ||||
| !overheatOver | 1.3.6.1.4.1.6321.1.2.3.1.0.4 | |||
notification Send a message to the manager that the overheated condition is over. The variable in the binding list is the current temperature in Celsius of the system. | ||||
| !errLog | 1.3.6.1.4.1.6321.1.2.3.1.0.5 | |||
notification Send a message to the manager that an error log is created in system. The variable in the binding list is the content of the error log.
| ||||
| !fanRpmLow | 1.3.6.1.4.1.6321.1.2.3.1.0.6 | |||
notification Send a message to the manager that the rpm of the fan is too low. The variable in the binding list is the current rpm of the fan.
| ||||
| !fanRpmNormal | 1.3.6.1.4.1.6321.1.2.3.1.0.7 | |||
notification Send a message to the manager that the low-rpm condition of the fan is over. The variable in the binding list is the current rpm of the fan.
| ||||
| !voltageOutOfRange | 1.3.6.1.4.1.6321.1.2.3.1.0.8 | |||
notification Send a message to the manager that the voltage of the system is out of range. The variable in the binding list is the current voltage in volt of the system. | ||||
| !voltageNormal | 1.3.6.1.4.1.6321.1.2.3.1.0.9 | |||
notification Send a message to the manager that the low-voltage condition is over. The variable in the binding list is the current voltage in volt of the system. | ||||
| !systemMaintenanceFailure | 1.3.6.1.4.1.6321.1.2.3.1.0.10 | |||
notification Send a message to the manager that the system maintence operation fail. The variable in the variable binding indicates the problem.
| ||||
| !configChange | 1.3.6.1.4.1.6321.1.2.3.1.0.11 | |||
notification This notification indicates that the configuration data of one module is changed.
| ||||
| !moduleUp | 1.3.6.1.4.1.6321.1.2.3.1.0.12 | |||
notification A moduleUp trap signifies that the sending protocol entity recognizes that one of the modules represented in the agent's configuration has come up.
| ||||
| !moduleDown | 1.3.6.1.4.1.6321.1.2.3.1.0.13 | |||
notification A moduleDown trap signifies that the sending protocol entity recognizes a failure in one of the modules represented in the agent's configuration.
| ||||
| !modulePlugIn | 1.3.6.1.4.1.6321.1.2.3.1.0.14 | |||
notification A modulePlugIn trap signifies that the sending protocol entity recognizes that one module is plugged into the device.
| ||||
| !modulePullOut | 1.3.6.1.4.1.6321.1.2.3.1.0.15 | |||
notification A modulePullOut trap signifies that the sending protocol entity recognizes one module is pulled out from the device.
| ||||
| !powerDC48VAFailure | 1.3.6.1.4.1.6321.1.2.3.1.0.16 | |||
notification The trap signifies that the power supply of DC 48V at the right side of main Chassis (front view) failed. | ||||
| !powerDC48VANormal | 1.3.6.1.4.1.6321.1.2.3.1.0.17 | |||
notification The trap signifies that the power supply of DC 48V at the right side of main Chassis (front view) is in normal state. | ||||
| !powerDC48VBFailure | 1.3.6.1.4.1.6321.1.2.3.1.0.18 | |||
notification The trap signifies that the power supply of DC 48V at the left side of main Chassis (front view) failed. | ||||
| !powerDC48VBNormal | 1.3.6.1.4.1.6321.1.2.3.1.0.19 | |||
notification The trap signifies that the power supply of DC 48V at the left side of main Chassis (front view) is in normal state. | ||||
| !extAlarmInputTrigger | 1.3.6.1.4.1.6321.1.2.3.1.0.20 | |||
notification The trap signifies that the external alarm input of MSC card is triggered. | ||||
| !extAlarmInputRelease | 1.3.6.1.4.1.6321.1.2.3.1.0.21 | |||
notification The trap signifies that the external alarm input of MSC card is released. | ||||
| !thermalSensorFailure | 1.3.6.1.4.1.6321.1.2.3.1.0.22 | |||
| !mscSwitchOverOK | 1.3.6.1.4.1.6321.1.2.3.1.0.23 | |||
notification The trap signifies that MSC card is switched over successfully. The value of iesSlotId is the slot ID of the current working MSC.
| ||||
| !networkTopologyChange | 1.3.6.1.4.1.6321.1.2.3.1.0.24 | |||
notification The trap signifies the network topology is changed. | ||||
| !adslAtucLof | 1.3.6.1.4.1.6321.1.2.3.1.0.25 | |||
| !adslAturLof | 1.3.6.1.4.1.6321.1.2.3.1.0.26 | |||
| !adslAtucLos | 1.3.6.1.4.1.6321.1.2.3.1.0.27 | |||
| !adslAturLos | 1.3.6.1.4.1.6321.1.2.3.1.0.28 | |||
| !adslAturLpr | 1.3.6.1.4.1.6321.1.2.3.1.0.29 | |||
| !adslAtucLofClear | 1.3.6.1.4.1.6321.1.2.3.1.0.30 | |||
| !adslAturLofClear | 1.3.6.1.4.1.6321.1.2.3.1.0.31 | |||
| !adslAtucLosClear | 1.3.6.1.4.1.6321.1.2.3.1.0.32 | |||
| !adslAturLosClear | 1.3.6.1.4.1.6321.1.2.3.1.0.33 | |||
| !adslAturLprClear | 1.3.6.1.4.1.6321.1.2.3.1.0.34 | |||
| NiesChassis | 1.3.6.1.4.1.6321.1.2.3.1.98.1 | |||
| SiesNumOfChassis | 1.3.6.1.4.1.6321.1.2.3.1.98.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The number of chassis in the IES-2000/3000 system | ||||
| TiesChassisTable | 1.3.6.1.4.1.6321.1.2.3.1.98.1.2 | NA | ||
table · not-accessible · current The table which contains the chassis information in IES-2000/3000 system | ||||
| RiesChassisEntry | 1.3.6.1.4.1.6321.1.2.3.1.98.1.2.1 | NA | ||
row · not-accessible · current
| ||||
| CiesChassisId | 1.3.6.1.4.1.6321.1.2.3.1.98.1.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The Chassis ID | ||||
| CiesChassisFrameNumber | 1.3.6.1.4.1.6321.1.2.3.1.98.1.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The Frame ID | ||||
| CiesChassisSerialNumber | 1.3.6.1.4.1.6321.1.2.3.1.98.1.2.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The Chassis Serial Number | ||||
| CiesChassisNumber | 1.3.6.1.4.1.6321.1.2.3.1.98.1.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The Chassis Number which is defined by the system administrator for management purpose | ||||
| CiesChassisStatus | 1.3.6.1.4.1.6321.1.2.3.1.98.1.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The current status of the chassis.
| ||||
| CiesChassisProductPartNumber | 1.3.6.1.4.1.6321.1.2.3.1.98.1.2.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Product part number | ||||
| CiesChassisHwRevisionNumber | 1.3.6.1.4.1.6321.1.2.3.1.98.1.2.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current Hardware revision Number | ||||
| CiesChassisCleiCode | 1.3.6.1.4.1.6321.1.2.3.1.98.1.2.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current CLEI code | ||||
| CiesChassisHwVersion | 1.3.6.1.4.1.6321.1.2.3.1.98.1.2.1.9 | DisplayString | RO | |
column · DisplayString · read-only · current Hardware version | ||||
| CiesChassisMacAddress | 1.3.6.1.4.1.6321.1.2.3.1.98.1.2.1.10 | DisplayString | RO | |
column · DisplayString · read-only · current MAC address | ||||
| TiesSlotTable | 1.3.6.1.4.1.6321.1.2.3.1.98.1.3 | NA | ||
table · not-accessible · current The table which contains the slot information in a chassis of IES-2000/3000 system | ||||
| RiesSlotEntry | 1.3.6.1.4.1.6321.1.2.3.1.98.1.3.1 | NA | ||
row · not-accessible · current
| ||||
| CiesSlotId | 1.3.6.1.4.1.6321.1.2.3.1.98.1.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Identity of the slot | ||||
| CiesSlotModuleType | 1.3.6.1.4.1.6321.1.2.3.1.98.1.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Card type of the plug-in card in IES-2000/3000.
| ||||
| CiesSlotModuleDescr | 1.3.6.1.4.1.6321.1.2.3.1.98.1.3.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The descriptions of the plug-in card in IES-2000/3000. | ||||
| CiesSlotModuleFWVersion | 1.3.6.1.4.1.6321.1.2.3.1.98.1.3.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The firmware version of the plug-in card in IES-2000/3000. | ||||
| CiesSlotModuleDriverVersion | 1.3.6.1.4.1.6321.1.2.3.1.98.1.3.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The DSL driver of the plug-in card in IES-2000/3000. | ||||
| CiesSlotModuleModemCodeVersion | 1.3.6.1.4.1.6321.1.2.3.1.98.1.3.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current The DSL modem code version of the plug-in card in IES-2000/3000 | ||||
| CiesSlotModuleStatus | 1.3.6.1.4.1.6321.1.2.3.1.98.1.3.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The module state of the plug-in card in IES-2000/3000
| ||||
| CiesSlotModuleAlarmStatus | 1.3.6.1.4.1.6321.1.2.3.1.98.1.3.1.8 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current This variable indicates the alarm status of the module.
It is a bit map represented as a sum, therefore, it can represent
multiple defects simultaneously. The moduleNoDefect should be set
if and only if no other flag is set.
The various bit positions are:
1 moduleNoDefect
2 moduleOverHeat
3 moduleFanRpmLow
4 moduleVoltageLow
5 moduleThermalSensorFailure
6 modulePullOut
7 powerDC48VAFailure
8 powerDC48VBFailure
9 extAlarmInputTrigger
10 moduleDown
11 mscSwitchOverOK
12 networkTopologyChange | ||||
| TiesMscPortConfTable | 1.3.6.1.4.1.6321.1.2.3.1.98.1.4 | NA | ||
table · not-accessible · current The table contains port configuration information in MSC1000. | ||||
| RiesMscPortConfEntry | 1.3.6.1.4.1.6321.1.2.3.1.98.1.4.1 | NA | ||
row · not-accessible · current
| ||||
| CiesMscPortId | 1.3.6.1.4.1.6321.1.2.3.1.98.1.4.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Identity of the extension slot in MSC1000. | ||||
| CiesMscPortType | 1.3.6.1.4.1.6321.1.2.3.1.98.1.4.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Port type of the extension slot in MSC1000.
| ||||
| CiesMscPortIfIndex | 1.3.6.1.4.1.6321.1.2.3.1.98.1.4.1.3 | INTEGER | RO | |
| CiesMscPortSpeed | 1.3.6.1.4.1.6321.1.2.3.1.98.1.4.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current
| ||||
| CiesMscPortDuplex | 1.3.6.1.4.1.6321.1.2.3.1.98.1.4.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current
| ||||
| CiesMscPortFlowControl | 1.3.6.1.4.1.6321.1.2.3.1.98.1.4.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current
| ||||
| CiesMscPortDefaultVLANTagging | 1.3.6.1.4.1.6321.1.2.3.1.98.1.4.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current
| ||||
| CiesMscPortTrunkGroupId | 1.3.6.1.4.1.6321.1.2.3.1.98.1.4.1.8 | INTEGER | RO | |
| CiesMscPortMode | 1.3.6.1.4.1.6321.1.2.3.1.98.1.4.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current The operational mode for uplink and subtending ports in MSC. Only the operational mode of subtending ports can be modified.
| ||||
| CiesMscPortVLANTrunking | 1.3.6.1.4.1.6321.1.2.3.1.98.1.4.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current The VLAN trunking setting for uplink and subtending ports in MSC.
| ||||
| NiesHWMonitor | 1.3.6.1.4.1.6321.1.2.3.1.98.2 | |||
| TiesFanRpmTable | 1.3.6.1.4.1.6321.1.2.3.1.98.2.1 | NA | ||
table · not-accessible · current A table that contains rpm information about the fans. | ||||
| RiesFanRpmEntry | 1.3.6.1.4.1.6321.1.2.3.1.98.2.1.1 | NA | ||
row · not-accessible · current A list of rpm information for each fan.
| ||||
| CiesFanRpmIndex | 1.3.6.1.4.1.6321.1.2.3.1.98.2.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The identity of the fan. | ||||
| CiesFanRpmCurValue | 1.3.6.1.4.1.6321.1.2.3.1.98.2.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The current rpm of the fan. | ||||
| CiesFanRpmMaxValue | 1.3.6.1.4.1.6321.1.2.3.1.98.2.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The maximum rpm ever performed by the fan. | ||||
| CiesFanRpmMinValue | 1.3.6.1.4.1.6321.1.2.3.1.98.2.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The minimum rpm ever performed by the fan. | ||||
| CiesFanRpmLowThresh | 1.3.6.1.4.1.6321.1.2.3.1.98.2.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The low threshold of the rpm of the fan. If the current rpm is less than the threshold, the device will initiate the fanRpmLow trap. | ||||
| CiesFanRpmDescr | 1.3.6.1.4.1.6321.1.2.3.1.98.2.1.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current The description of the fan (e.g. location, function, etc.). | ||||
| TiesVoltageTable | 1.3.6.1.4.1.6321.1.2.3.1.98.2.2 | NA | ||
table · not-accessible · current A table that contains voltage information about the system. | ||||
| RiesVoltageEntry | 1.3.6.1.4.1.6321.1.2.3.1.98.2.2.1 | NA | ||
row · not-accessible · current A list of voltage information for each sensor.
| ||||
| CiesVoltageIndex | 1.3.6.1.4.1.6321.1.2.3.1.98.2.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The identity of the sensor. | ||||
| CiesVoltageCurValue | 1.3.6.1.4.1.6321.1.2.3.1.98.2.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The current voltage detected by the sensor (in milli-voltage). | ||||
| CiesVoltageMaxValue | 1.3.6.1.4.1.6321.1.2.3.1.98.2.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The maximum voltage ever detected by the sensor (in milli-voltage). | ||||
| CiesVoltageMinValue | 1.3.6.1.4.1.6321.1.2.3.1.98.2.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The minimum voltage ever detected by the sensor (in milli-voltage). | ||||
| CiesVoltageNominalValue | 1.3.6.1.4.1.6321.1.2.3.1.98.2.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The nominal voltage which the power should supply (in milli-voltage). | ||||
| CiesVoltageLowThresh | 1.3.6.1.4.1.6321.1.2.3.1.98.2.2.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The low threshold of the voltage (in milli-voltage). If the current voltage is less than the threshold, the device will initiate the voltageLow trap. | ||||
| CiesVoltageDescr | 1.3.6.1.4.1.6321.1.2.3.1.98.2.2.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current The description of the voltage (e.g. location, nominal value, etc.). | ||||
| TiesSysTempTable | 1.3.6.1.4.1.6321.1.2.3.1.98.2.3 | NA | ||
table · not-accessible · current A table that contains temperature information about system. | ||||
| RiesSysTempEntry | 1.3.6.1.4.1.6321.1.2.3.1.98.2.3.1 | NA | ||
row · not-accessible · current A list of temperature information for each sensor.
| ||||
| CiesSysTempIndex | 1.3.6.1.4.1.6321.1.2.3.1.98.2.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The identity of the sensor. | ||||
| CiesSysTempCurValue | 1.3.6.1.4.1.6321.1.2.3.1.98.2.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The current temperature detected in Celsius by the sensor. | ||||
| CiesSysTempMaxValue | 1.3.6.1.4.1.6321.1.2.3.1.98.2.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The maximum temperature ever detected in Celsius by the sensor. | ||||
| CiesSysTempMinValue | 1.3.6.1.4.1.6321.1.2.3.1.98.2.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The minimum temperature ever detected in Celsius by the sensor. | ||||
| CiesSysTempHighThresh | 1.3.6.1.4.1.6321.1.2.3.1.98.2.3.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The high threshold of the temperature in Celsius. If the current temperature is higher than the threshold, the device will initiate the overheat trap. | ||||
| CiesSysTempDescr | 1.3.6.1.4.1.6321.1.2.3.1.98.2.3.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current The description of the temperature sensor (e.g. location, function, etc.). | ||||
| NiesSysMgnt | 1.3.6.1.4.1.6321.1.2.3.1.98.3 | |||
| NiesSysState | 1.3.6.1.4.1.6321.1.2.3.1.98.3.1 | |||
| SiesSystemCurrentStatus | 1.3.6.1.4.1.6321.1.2.3.1.98.3.1.1 | INTEGER (0..255) | RO | |
scalar · INTEGER (0..255) · read-only · current This variable indicates the status of the system.
The sysCurrentStatus is a bit map represented
as a sum, therefore, it can represent multiple defects
simultaneously. The sysNoDefect should be set if and only if
no other flag is set.
The various bit positions are:
1 sysNoDefect
2 sysOverHeat
3 sysFanRpmLow
4 sysVoltageLow
5 sysThermalSensorFailure
6 modulePullOut
7 powerDC48VAFailure
8 powerDC48VBFailure
9 extAlarmInputTrigger
10 moduleDown
11 mscSwitchOverOK
12 networkTopologyChange | ||||
| SiesProblemCause | 1.3.6.1.4.1.6321.1.2.3.1.98.3.1.2 | DisplayString | RO | |
scalar · DisplayString · read-only · current It describes the problem occurred in the system, e.g. maintenance operation failures, system reboot, error log, ...etc. | ||||
| NiesSysMaintenance | 1.3.6.1.4.1.6321.1.2.3.1.98.3.2 | |||
| SiesMaintenanceOps | 1.3.6.1.4.1.6321.1.2.3.1.98.3.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The managed object is for system maintenance. When the EMS
wants to trigger the system maitenance operation, the EMS
shall send SNMP-SET message to set the corresponding bit value
to be 1. The various bit positions are:
BIT 1: config save
BIT 2: reset
BIT 3: local loopback test
BIT 4: remote loopback test
BIT 5: clear system alarms
BIT 6: F4 loopback test
BIT 7: F5 loopback test
BIT 8: DSL Line Diagnostic | ||||
| SiesMaintenanceTarget | 1.3.6.1.4.1.6321.1.2.3.1.98.3.2.2 | INTEGER (1..48) | RW | |
scalar · INTEGER (1..48) · read-write · current The managed object is used for identify the target on which the maintenance operation should be performed. | ||||
| SiesMaintenanceDSLConfOps | 1.3.6.1.4.1.6321.1.2.3.1.98.3.2.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current The managed object is for xDSL line configuration. When the EMS
wants to issue the desired operation, the EMS
shall send SNMP-SET message to set the corresponding bit value
to be 1. The various bit positions are:
BIT 1: enable port
BIT 2: disable port
BIT 3: set DSL mode
BIT 4: set profile
BIT 5: enable mac filter
BIT 6: disable mac filter
BIT 7: set packet filter
BIT 8: enable dot1x
BIT 9: disable dot1x
BIT 10: set dot1x control
BIT 11: enable dot1x re-authentication
BIT 12: disable dot1x re-authentication
BIT 13: set dot1x re-authentication period
BIT 14: enable mac count filter
BIT 15: disable mac count filter
BIT 16: set mac count filter
BIT 17: set alarm profile
BIT 18: set Annex L (Only in AnnexA)
BIT 19: set power management
BIT 20: set rate adaptation mode
BIT 21: set IGMP filter (Not support after E5-111 v3.0)
BIT 22: enable Annex M
BIT 23: disable Annex M | ||||
| SiesMaintenanceDSLConfTarget | 1.3.6.1.4.1.6321.1.2.3.1.98.3.2.4 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The managed object is used for identify the target on which
the line configuration should be performed. The target is encoded
as:
Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5~11: each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc. | ||||
| SiesMaintenanceDSLConfProfileName | 1.3.6.1.4.1.6321.1.2.3.1.98.3.2.5 | DisplayString (SIZE (1..31)) | RW | |
scalar · DisplayString (SIZE (1..31)) · read-write · current The DSL profile name | ||||
| SiesMaintenanceDSLConfMode | 1.3.6.1.4.1.6321.1.2.3.1.98.3.2.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The DSL mode. The semantic for each bit is: Bit 1: ADSL, G.lite Bit 2: ADSL, G.dmt Bit 3: ADSL, T1.413 Bit 4: ADSL, Auto Bit 5: ADSL, ETSI Bit 6: ADSL2, Bit 7: ADSL2+ | ||||
| SiesMaintenanceDSLConfPktFilter | 1.3.6.1.4.1.6321.1.2.3.1.98.3.2.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current The packet filter. The semantic for each bit is:
Bit 1: accept all
Bit 2: accept PPPoE only
Bit 3: reject ARP
Bit 4: reject DHCP
Bit 5: reject EAPOL
Bit 6: reject PPPoE
Bit 7: reject NetBIOS
Bit 8: reject IGMP
Bit 9: reject IP | ||||
| SiesMaintenanceDSLConfDot1xControl | 1.3.6.1.4.1.6321.1.2.3.1.98.3.2.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current The configuration defines the 802.1x control type.
| ||||
| SiesMaintenanceDSLConfDot1xReauthPeriod | 1.3.6.1.4.1.6321.1.2.3.1.98.3.2.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current The configuration defines the 802.1x re-authentication period (seconds). | ||||
| SiesMaintenanceDSLConfMacCount | 1.3.6.1.4.1.6321.1.2.3.1.98.3.2.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current The configuration defines the number of mac addresses which can pass through the port. | ||||
| SiesMaintenanceVpi | 1.3.6.1.4.1.6321.1.2.3.1.98.3.2.11 | INTEGER (0..255) | RW | |
scalar · INTEGER (0..255) · read-write · current VPI of the channel | ||||
| SiesMaintenanceVci | 1.3.6.1.4.1.6321.1.2.3.1.98.3.2.12 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current VCI of the channel | ||||
| SiesMaintenanceDSLConfAlarmProfileName | 1.3.6.1.4.1.6321.1.2.3.1.98.3.2.13 | OCTET STRING (SIZE (1..31)) | RW | |
scalar · OCTET STRING (SIZE (1..31)) · read-write · current The DSL alarm profile name | ||||
| SiesMaintenanceDSLConfAnnexL | 1.3.6.1.4.1.6321.1.2.3.1.98.3.2.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current The annex L setting of the ADSL line (Only in AnnexA).
| ||||
| SiesMaintenanceDSLConfPmMode | 1.3.6.1.4.1.6321.1.2.3.1.98.3.2.15 | INTEGER | RW | |
scalar · INTEGER · read-write · current The power management mode of the ADSL line.
| ||||
| SiesMaintenanceDSLConfRateMode | 1.3.6.1.4.1.6321.1.2.3.1.98.3.2.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information.
| ||||
| SiesMaintenanceDSLConfIgmpFilter | 1.3.6.1.4.1.6321.1.2.3.1.98.3.2.17 | OCTET STRING (SIZE (1..31)) | RW | |
scalar · OCTET STRING (SIZE (1..31)) · read-write · current The IGMP filter name. | ||||
| NiesSysTimeSetup | 1.3.6.1.4.1.6321.1.2.3.1.98.3.3 | |||
| SiesTimeServerMode | 1.3.6.1.4.1.6321.1.2.3.1.98.3.3.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The mechanism of Time Server when the system boots up.
| ||||
| SiesTimeServerIP | 1.3.6.1.4.1.6321.1.2.3.1.98.3.3.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP Address of Time Server | ||||
| SiesSystemTime | 1.3.6.1.4.1.6321.1.2.3.1.98.3.3.3 | DisplayString | RW | |
scalar · DisplayString · read-write · current The system time | ||||
| SiesSystemDate | 1.3.6.1.4.1.6321.1.2.3.1.98.3.3.4 | DisplayString | RW | |
scalar · DisplayString · read-write · current The system date | ||||
| SiesSystemTimeZone | 1.3.6.1.4.1.6321.1.2.3.1.98.3.3.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current The system time zone
| ||||
| NiesSysAccessControl | 1.3.6.1.4.1.6321.1.2.3.1.98.3.4 | |||
| TiesAccessCtrlTable | 1.3.6.1.4.1.6321.1.2.3.1.98.3.4.1 | NA | ||
table · not-accessible · current A table that contains information about service access control. | ||||
| RiesAccessCtrlEntry | 1.3.6.1.4.1.6321.1.2.3.1.98.3.4.1.1 | NA | ||
| CiesAccessCtrlService | 1.3.6.1.4.1.6321.1.2.3.1.98.3.4.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The service type of the access control entry.
| ||||
| CiesAccessCtrlEnable | 1.3.6.1.4.1.6321.1.2.3.1.98.3.4.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable the service.
| ||||
| CiesAccessCtrlPort | 1.3.6.1.4.1.6321.1.2.3.1.98.3.4.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The port number which the service uses. | ||||
| SiesMaxNumOfSecuredClients | 1.3.6.1.4.1.6321.1.2.3.1.98.3.4.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of sets of secured clients. | ||||
| TiesSecuredClientTable | 1.3.6.1.4.1.6321.1.2.3.1.98.3.4.3 | NA | ||
table · not-accessible · current A table that contains information about secured clients. | ||||
| RiesSecuredClientEntry | 1.3.6.1.4.1.6321.1.2.3.1.98.3.4.3.1 | NA | ||
row · not-accessible · current A list of secured client entry. | ||||
| CiesSecuredClientStartIp | 1.3.6.1.4.1.6321.1.2.3.1.98.3.4.3.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The starting IP address of a set of secured clients. | ||||
| CiesSecuredClientEndIp | 1.3.6.1.4.1.6321.1.2.3.1.98.3.4.3.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The ending IP address of a set of secured clients. | ||||
| CiesSecuredClientService | 1.3.6.1.4.1.6321.1.2.3.1.98.3.4.3.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Each bit corresponds to a service. The bit is set to 1 if the
service is enabled, and set to 0 if the service is disabled.
The various bit positions are:
BIT 1: telnet
BIT 2: FTP
BIT 3: web
BIT 4: ICMP | ||||
| CiesSecuredClientRowStatus | 1.3.6.1.4.1.6321.1.2.3.1.98.3.4.3.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or modify or delete an existing row in this table. A row is activated by setting this object to `active', and is deactivated by setting it to 'notInService'. | ||||
| NiesSysStaticRoute | 1.3.6.1.4.1.6321.1.2.3.1.98.3.5 | |||
| SiesMaxNumOfStaticRoutes | 1.3.6.1.4.1.6321.1.2.3.1.98.3.5.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of static routes. | ||||
| TiesStaticRouteTable | 1.3.6.1.4.1.6321.1.2.3.1.98.3.5.2 | NA | ||
table · not-accessible · current A table that contains information about static routes. | ||||
| RiesStaticRouteEntry | 1.3.6.1.4.1.6321.1.2.3.1.98.3.5.2.1 | NA | ||
| CiesStaticRouteName | 1.3.6.1.4.1.6321.1.2.3.1.98.3.5.2.1.1 | DisplayString | RO | |
column · DisplayString · read-only · current The name of the static route. | ||||
| CiesStaticRouteDest | 1.3.6.1.4.1.6321.1.2.3.1.98.3.5.2.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The destination IP address of the static route. | ||||
| CiesStaticRouteMask | 1.3.6.1.4.1.6321.1.2.3.1.98.3.5.2.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The subnet mask of the static route. | ||||
| CiesStaticRouteGateway | 1.3.6.1.4.1.6321.1.2.3.1.98.3.5.2.1.4 | IpAddress | RC | |
column · IpAddress · read-create · current The gateway IP address of the static route. | ||||
| CiesStaticRouteMetric | 1.3.6.1.4.1.6321.1.2.3.1.98.3.5.2.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current The routing metric of the static route. | ||||
| CiesStaticRouteRowStatus | 1.3.6.1.4.1.6321.1.2.3.1.98.3.5.2.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or modify or delete an existing row in this table. A row is activated by setting this object to `active', and is deactivated by setting it to 'notInService'. | ||||
| NiesSyslogSetup | 1.3.6.1.4.1.6321.1.2.3.1.98.3.6 | |||
| SiesSysLogEnable | 1.3.6.1.4.1.6321.1.2.3.1.98.3.6.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable syslog function. | ||||
| SiesSysLogServer | 1.3.6.1.4.1.6321.1.2.3.1.98.3.6.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current IP address of the syslog server. | ||||
| SiesSysLogFacility | 1.3.6.1.4.1.6321.1.2.3.1.98.3.6.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Log facility used by the syslog function.
| ||||
| NiesSysDhcpSetup | 1.3.6.1.4.1.6321.1.2.3.1.98.3.7 | |||
| SiesDhcpRelayEnable | 1.3.6.1.4.1.6321.1.2.3.1.98.3.7.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable DHCP relay function.
| ||||
| SiesDhcpRelayOption82Enable | 1.3.6.1.4.1.6321.1.2.3.1.98.3.7.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable DHCP relay Option82 function.
| ||||
| SiesDhcpRelayOption82Info | 1.3.6.1.4.1.6321.1.2.3.1.98.3.7.3 | DisplayString | RW | |
scalar · DisplayString · read-write · current User specific Option82 information. | ||||
| SiesMaxNumOfDhcpServers | 1.3.6.1.4.1.6321.1.2.3.1.98.3.7.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of DHCP servers. | ||||
| TiesDhcpServerTable | 1.3.6.1.4.1.6321.1.2.3.1.98.3.7.5 | NA | ||
table · not-accessible · current A table that contains DHCP server information. | ||||
| RiesDhcpServerEntry | 1.3.6.1.4.1.6321.1.2.3.1.98.3.7.5.1 | NA | ||
| CiesDhcpServerIp | 1.3.6.1.4.1.6321.1.2.3.1.98.3.7.5.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the DHCP server. | ||||
| CiesDhcpServerRowStatus | 1.3.6.1.4.1.6321.1.2.3.1.98.3.7.5.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of the DHCP server entry. | ||||
| NiesSysSNMPSetup | 1.3.6.1.4.1.6321.1.2.3.1.98.3.8 | |||
| SiesMaxNumberOfTrapDestinations | 1.3.6.1.4.1.6321.1.2.3.1.98.3.8.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The max number of the trap destinations. | ||||
| TiesSNMPTrapDestTable | 1.3.6.1.4.1.6321.1.2.3.1.98.3.8.2 | NA | ||
table · not-accessible · current A table that contains SNMP trap destination information. | ||||
| RiesSNMPTrapDestEntry | 1.3.6.1.4.1.6321.1.2.3.1.98.3.8.2.1 | NA | ||
row · not-accessible · current The entry of SNMP trap destination table.
| ||||
| CiesTrapDestIp | 1.3.6.1.4.1.6321.1.2.3.1.98.3.8.2.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the trap destination. | ||||
| CiesTrapDestPort | 1.3.6.1.4.1.6321.1.2.3.1.98.3.8.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The UDP port of the trap destination. | ||||
| CiesTrapDestRowStatus | 1.3.6.1.4.1.6321.1.2.3.1.98.3.8.2.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of the trap destination entry. | ||||
| SiesSnmpGetCommunity | 1.3.6.1.4.1.6321.1.2.3.1.98.3.8.3 | DisplayString | RW | |
scalar · DisplayString · read-write · current The SNMP get community. | ||||
| SiesSnmpSetCommunity | 1.3.6.1.4.1.6321.1.2.3.1.98.3.8.4 | DisplayString | RW | |
scalar · DisplayString · read-write · current The SNMP set community. | ||||
| SiesSnmpTrapCommunity | 1.3.6.1.4.1.6321.1.2.3.1.98.3.8.5 | DisplayString | RW | |
scalar · DisplayString · read-write · current The SNMP trap community. | ||||
| NiesSysDot1xSetup | 1.3.6.1.4.1.6321.1.2.3.1.98.3.9 | |||
| SiesMaxNumberOfRadiusServers | 1.3.6.1.4.1.6321.1.2.3.1.98.3.9.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The max number of the RADIUS Servers. | ||||
| TiesRadiusServerTable | 1.3.6.1.4.1.6321.1.2.3.1.98.3.9.2 | NA | ||
table · not-accessible · current A table that contains Radius Server information. | ||||
| RiesRadiusServerEntry | 1.3.6.1.4.1.6321.1.2.3.1.98.3.9.2.1 | NA | ||
| CiesRadiusServerIndex | 1.3.6.1.4.1.6321.1.2.3.1.98.3.9.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The identity of the RADIUS server. | ||||
| CiesRadiusServerIp | 1.3.6.1.4.1.6321.1.2.3.1.98.3.9.2.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The IP address of the Radius Server. | ||||
| CiesRadiusServerPort | 1.3.6.1.4.1.6321.1.2.3.1.98.3.9.2.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The UDP port of the Radius Server. | ||||
| CiesRadiusSharedSecret | 1.3.6.1.4.1.6321.1.2.3.1.98.3.9.2.1.4 | DisplayString | RC | |
column · DisplayString · read-create · current The shared secret of the Radius Server. | ||||
| CiesRadiusServerRowStatus | 1.3.6.1.4.1.6321.1.2.3.1.98.3.9.2.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of the Radius Server entry. | ||||
| SiesDot1xEnable | 1.3.6.1.4.1.6321.1.2.3.1.98.3.9.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable the 802.1x function.
| ||||
| TiesDot1xPortTable | 1.3.6.1.4.1.6321.1.2.3.1.98.3.9.4 | NA | ||
table · not-accessible · current This table includes the configuration of 802.1x. | ||||
| RiesDot1xPortEntry | 1.3.6.1.4.1.6321.1.2.3.1.98.3.9.4.1 | NA | ||
| CiesDot1xPortEnable | 1.3.6.1.4.1.6321.1.2.3.1.98.3.9.4.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The option defines if the port enables 802.1x settings.
| ||||
| CiesDot1xPortControl | 1.3.6.1.4.1.6321.1.2.3.1.98.3.9.4.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The configuration defines the 802.1x port control type.
| ||||
| CiesDot1xPortReAuthEnable | 1.3.6.1.4.1.6321.1.2.3.1.98.3.9.4.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The option defines if the port enables 802.1x re-authentication.
| ||||
| CiesDot1xPortReAuthPeriod | 1.3.6.1.4.1.6321.1.2.3.1.98.3.9.4.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The configuration defines the 802.1x re-authentication period (seconds) for each port. | ||||
| NiesSysMacFilter | 1.3.6.1.4.1.6321.1.2.3.1.98.3.10 | |||
| TiesMacFilterStatusTable | 1.3.6.1.4.1.6321.1.2.3.1.98.3.10.1 | NA | ||
table · not-accessible · current This table includes the status of mac filtering for each port. | ||||
| RiesMacFilterStatusEntry | 1.3.6.1.4.1.6321.1.2.3.1.98.3.10.1.1 | NA | ||
| CiesMacFilterStatusEnable | 1.3.6.1.4.1.6321.1.2.3.1.98.3.10.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The option defines if the port enables mac filtering.
| ||||
| SiesMaxNumberOfMacFilters | 1.3.6.1.4.1.6321.1.2.3.1.98.3.10.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The max number of the mac filters in the system. | ||||
| SiesMaxNumberOfMacFiltersPerPort | 1.3.6.1.4.1.6321.1.2.3.1.98.3.10.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The max number of the mac filters for each port. | ||||
| SiesCurrNumberOfMacFilters | 1.3.6.1.4.1.6321.1.2.3.1.98.3.10.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current number of the mac filters in the system. | ||||
| TiesMacFilterTable | 1.3.6.1.4.1.6321.1.2.3.1.98.3.10.5 | NA | ||
table · not-accessible · current A table that contains the mac filtering information. | ||||
| RiesMacFilterEntry | 1.3.6.1.4.1.6321.1.2.3.1.98.3.10.5.1 | NA | ||
| CiesMacFilterMacAddr | 1.3.6.1.4.1.6321.1.2.3.1.98.3.10.5.1.1 | PhysAddress | RO | |
column · PhysAddress · read-only · current The mac address which can pass through the port. | ||||
| CiesMacFilterRowStatus | 1.3.6.1.4.1.6321.1.2.3.1.98.3.10.5.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of the entry. | ||||
| NiesSysPacketFilter | 1.3.6.1.4.1.6321.1.2.3.1.98.3.11 | |||
| TiesPacketFilterTable | 1.3.6.1.4.1.6321.1.2.3.1.98.3.11.1 | NA | ||
table · not-accessible · current This table includes packet filtering for each port. | ||||
| RiesPacketFilterEntry | 1.3.6.1.4.1.6321.1.2.3.1.98.3.11.1.1 | NA | ||
| CiesPacketFilter | 1.3.6.1.4.1.6321.1.2.3.1.98.3.11.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The packet filter. The semantic for each bit is:
Bit 1: accept all
Bit 2: accept PPPoE only
Bit 3: reject ARP
Bit 4: reject DHCP
Bit 5: reject EAPOL
Bit 6: reject PPPoE
Bit 7: reject NetBIOS
Bit 8: reject IGMP
Bit 9: reject IP | ||||
| NiesSysMacCountFilter | 1.3.6.1.4.1.6321.1.2.3.1.98.3.12 | |||
| TiesMacCountFilterTable | 1.3.6.1.4.1.6321.1.2.3.1.98.3.12.1 | NA | ||
table · not-accessible · current This table includes mac count filtering for each port. | ||||
| RiesMacCountFilterEntry | 1.3.6.1.4.1.6321.1.2.3.1.98.3.12.1.1 | NA | ||
| CiesMacCountFilterStatus | 1.3.6.1.4.1.6321.1.2.3.1.98.3.12.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The option defines if the port enables mac count filtering.
| ||||
| CiesMacCountFilterCount | 1.3.6.1.4.1.6321.1.2.3.1.98.3.12.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The number of mac addresses which can pass through the port. | ||||
| NiesSysMulticastGroup | 1.3.6.1.4.1.6321.1.2.3.1.98.3.13 | |||
| SiesMaxNumberOfMulticastGroups | 1.3.6.1.4.1.6321.1.2.3.1.98.3.13.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The max number of static multicast groups in the system. | ||||
| TiesMulticastGroupTable | 1.3.6.1.4.1.6321.1.2.3.1.98.3.13.2 | NA | ||
table · not-accessible · current A table that contains static multicast group information. | ||||
| RiesMulticastGroupEntry | 1.3.6.1.4.1.6321.1.2.3.1.98.3.13.2.1 | NA | ||
| CiesMulticastGroupMacAddr | 1.3.6.1.4.1.6321.1.2.3.1.98.3.13.2.1.1 | PhysAddress | RO | |
column · PhysAddress · read-only · current The multicast MAC address of the group. | ||||
| CiesMulticastGroupPorts | 1.3.6.1.4.1.6321.1.2.3.1.98.3.13.2.1.2 | PortList | RC | |
column · PortList · read-create · current The port list which specifies the ports joining the multicast group. | ||||
| CiesMulticastGroupRowStatus | 1.3.6.1.4.1.6321.1.2.3.1.98.3.13.2.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of the multicast group entry. | ||||
| NiesSysIgmpFilter | 1.3.6.1.4.1.6321.1.2.3.1.98.3.14 | |||
| SiesMaxNumberOfIgmpFilters | 1.3.6.1.4.1.6321.1.2.3.1.98.3.14.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The max number of IGMP filters in the system. | ||||
| TiesIgmpFilterTable | 1.3.6.1.4.1.6321.1.2.3.1.98.3.14.2 | NA | ||
table · not-accessible · current A table that contains IGMP filters. | ||||
| RiesIgmpFilterEntry | 1.3.6.1.4.1.6321.1.2.3.1.98.3.14.2.1 | NA | ||
row · not-accessible · current The entry of IGMP filter table. | ||||
| CiesIgmpFilterName | 1.3.6.1.4.1.6321.1.2.3.1.98.3.14.2.1.1 | OCTET STRING (SIZE (1..31)) | RO | |
column · OCTET STRING (SIZE (1..31)) · read-only · current The IGMP filter name. | ||||
| CiesIgmpFilterIndex | 1.3.6.1.4.1.6321.1.2.3.1.98.3.14.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The index which specifies the filter rule. | ||||
| CiesIgmpFilterStartIp | 1.3.6.1.4.1.6321.1.2.3.1.98.3.14.2.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The start IP of the filter rule. | ||||
| CiesIgmpFilterEndIp | 1.3.6.1.4.1.6321.1.2.3.1.98.3.14.2.1.4 | IpAddress | RC | |
column · IpAddress · read-create · current The end IP of the filter rule. | ||||
| CiesIgmpFilterRowStatus | 1.3.6.1.4.1.6321.1.2.3.1.98.3.14.2.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of the IGMP filter entry. | ||||
| TiesIgmpFilterPortTable | 1.3.6.1.4.1.6321.1.2.3.1.98.3.14.3 | NA | ||
table · not-accessible · current This table specifies the IGMP filter of the port. | ||||
| RiesIgmpFilterPortEntry | 1.3.6.1.4.1.6321.1.2.3.1.98.3.14.3.1 | NA | ||
| CiesIgmpFilterPortFilter | 1.3.6.1.4.1.6321.1.2.3.1.98.3.14.3.1.1 | OCTET STRING (SIZE (1..31)) | RW | |
column · OCTET STRING (SIZE (1..31)) · read-write · current The IGMP filter of the port. | ||||
| NiesL2SW | 1.3.6.1.4.1.6321.1.2.3.1.98.4 | |||
| SiesIGMPSnoopingEnabled | 1.3.6.1.4.1.6321.1.2.3.1.98.4.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current A flag indicating whether IGMP snooping function is enabled or not.
| ||||
| SiesManagementVLANId | 1.3.6.1.4.1.6321.1.2.3.1.98.4.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The VLAN ID for management. | ||||
| SiesMaxNumOfStaticVlans | 1.3.6.1.4.1.6321.1.2.3.1.98.4.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of static VLANs supported by the system. | ||||
| SiesMaxNumOfTrunkGroups | 1.3.6.1.4.1.6321.1.2.3.1.98.4.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of trunk groups. | ||||
| TiesTrunkGroupTable | 1.3.6.1.4.1.6321.1.2.3.1.98.4.5 | NA | ||
table · not-accessible · current A table that contains trunk group configuration. | ||||
| RiesTrunkGroupEntry | 1.3.6.1.4.1.6321.1.2.3.1.98.4.5.1 | NA | ||
| CiesTrunkGroupId | 1.3.6.1.4.1.6321.1.2.3.1.98.4.5.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The ID of the trunk group | ||||
| CiesTrunkGroupName | 1.3.6.1.4.1.6321.1.2.3.1.98.4.5.1.2 | DisplayString | RC | |
column · DisplayString · read-create · current The name of the trunk group | ||||
| CiesTrunkGroupPorts | 1.3.6.1.4.1.6321.1.2.3.1.98.4.5.1.3 | PortList | RC | |
column · PortList · read-create · current The port list of the trunk group | ||||
| CiesTrunkGroupRowStatus | 1.3.6.1.4.1.6321.1.2.3.1.98.4.5.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of the trunk group entry | ||||
| SiesPortIsolationEnable | 1.3.6.1.4.1.6321.1.2.3.1.98.4.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current A flag indicating whether VLAN port isolation function is enabled or not.
| ||||
| SiesRSTPEnable | 1.3.6.1.4.1.6321.1.2.3.1.98.4.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/Disable RSTP.
| ||||
| SiesSwitchMode | 1.3.6.1.4.1.6321.1.2.3.1.98.4.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Switch DSLAM's operatrion Mode.
| ||||
Traps / Notifications
- adslAtucLof
1.3.6.1.4.1.6321.1.2.3.1.0.25 - adslAtucLofClear
1.3.6.1.4.1.6321.1.2.3.1.0.30 - adslAtucLos
1.3.6.1.4.1.6321.1.2.3.1.0.27 - adslAtucLosClear
1.3.6.1.4.1.6321.1.2.3.1.0.32 - adslAturLof
1.3.6.1.4.1.6321.1.2.3.1.0.26 - adslAturLofClear
1.3.6.1.4.1.6321.1.2.3.1.0.31 - adslAturLos
1.3.6.1.4.1.6321.1.2.3.1.0.28 - adslAturLosClear
1.3.6.1.4.1.6321.1.2.3.1.0.33 - adslAturLpr
1.3.6.1.4.1.6321.1.2.3.1.0.29 - adslAturLprClear
1.3.6.1.4.1.6321.1.2.3.1.0.34 - configChange
1.3.6.1.4.1.6321.1.2.3.1.0.11 - errLog
1.3.6.1.4.1.6321.1.2.3.1.0.5 - extAlarmInputRelease
1.3.6.1.4.1.6321.1.2.3.1.0.21 - extAlarmInputTrigger
1.3.6.1.4.1.6321.1.2.3.1.0.20 - fanRpmLow
1.3.6.1.4.1.6321.1.2.3.1.0.6 - fanRpmNormal
1.3.6.1.4.1.6321.1.2.3.1.0.7 - moduleDown
1.3.6.1.4.1.6321.1.2.3.1.0.13 - modulePlugIn
1.3.6.1.4.1.6321.1.2.3.1.0.14 - modulePullOut
1.3.6.1.4.1.6321.1.2.3.1.0.15 - moduleUp
1.3.6.1.4.1.6321.1.2.3.1.0.12 - mscSwitchOverOK
1.3.6.1.4.1.6321.1.2.3.1.0.23 - networkTopologyChange
1.3.6.1.4.1.6321.1.2.3.1.0.24 - overheat
1.3.6.1.4.1.6321.1.2.3.1.0.3 - overheatOver
1.3.6.1.4.1.6321.1.2.3.1.0.4 - powerDC48VAFailure
1.3.6.1.4.1.6321.1.2.3.1.0.16 - powerDC48VANormal
1.3.6.1.4.1.6321.1.2.3.1.0.17 - powerDC48VBFailure
1.3.6.1.4.1.6321.1.2.3.1.0.18 - powerDC48VBNormal
1.3.6.1.4.1.6321.1.2.3.1.0.19 - reboot
1.3.6.1.4.1.6321.1.2.3.1.0.1 - systemMaintenanceFailure
1.3.6.1.4.1.6321.1.2.3.1.0.10 - systemShutdown
1.3.6.1.4.1.6321.1.2.3.1.0.2 - thermalSensorFailure
1.3.6.1.4.1.6321.1.2.3.1.0.22 - voltageNormal
1.3.6.1.4.1.6321.1.2.3.1.0.9 - voltageOutOfRange
1.3.6.1.4.1.6321.1.2.3.1.0.8