SYSTEM-MIB
Brocade Communications Systems, Inc.The MIB module is for system information.
Copyright (c) 1996-2003 Brocade Communications Systems, Inc.
All rights reserved.snmptranslate -m SYSTEM-MIB -Tpsnmpwalk -v2c -c <community> -m SYSTEM-MIB <host> 1.3.6.1.4.1.1588.2.1.1.1.1Imports
| Brocade-TC | SwPortIndex, SwSensorIndex |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
| SWBASE-MIB | sw |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NswTrapsV2 | 1.3.6.1.4.1.1588.2.1.1.1.0 | ||||||||||||||||||||
node · current The Traps for Brocade's Switch. | |||||||||||||||||||||
| !swFCPortScn | 1.3.6.1.4.1.1588.2.1.1.1.0.3 | ||||||||||||||||||||
notification · current This trap is sent whenever an FC port operational status or
its type changed. The events that trigger this trap are
port goes to online/offline, port type changed to
E-port/F-port/FL-port. swFCPortName and swSsn are optional
varbind in the trap PDU.swSsn is optional varbind sent when swExtTrap
is also enabled.swVfId is optional if VF is enabled.
| |||||||||||||||||||||
| !swEventTrap | 1.3.6.1.4.1.1588.2.1.1.1.0.4 | ||||||||||||||||||||
notification · current This trap is generated when an event whose level at or below swEventTrapLevel occurs. | |||||||||||||||||||||
| !swStateChangeTrap | 1.3.6.1.4.1.1588.2.1.1.1.0.12 | ||||||||||||||||||||
notification · current This trap is sent whenever switch state changes to online/offline
| |||||||||||||||||||||
| IswSystem | 1.3.6.1.4.1.1588.2.1.1.1.1 | ||||||||||||||||||||
identity The MIB module is for system information.
Copyright (c) 1996-2003 Brocade Communications Systems, Inc.
All rights reserved. | |||||||||||||||||||||
| SswCurrentDate | 1.3.6.1.4.1.1588.2.1.1.1.1.1 | DisplayString (SIZE (0..64)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (0..64)) · read-only · current The current date information in displayable textual format. | |||||||||||||||||||||
| SswBootDate | 1.3.6.1.4.1.1588.2.1.1.1.1.2 | DisplayString (SIZE (0..64)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (0..64)) · read-only · current The date and time when the system last booted, in displayable textual format. | |||||||||||||||||||||
| SswFWLastUpdated | 1.3.6.1.4.1.1588.2.1.1.1.1.3 | DisplayString (SIZE (0..64)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (0..64)) · read-only · current The information indicates the date when the firmware was last updated, in displayable textual format. | |||||||||||||||||||||
| SswFlashLastUpdated | 1.3.6.1.4.1.1588.2.1.1.1.1.4 | DisplayString (SIZE (0..64)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (0..64)) · read-only · current The information indicates the date when the FLASH was last updated, in displayable textual format. | |||||||||||||||||||||
| SswBootPromLastUpdated | 1.3.6.1.4.1.1588.2.1.1.1.1.5 | DisplayString (SIZE (0..64)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (0..64)) · read-only · current The information indicates the date when the boot PROM was last updated, in displayable textual format. | |||||||||||||||||||||
| SswFirmwareVersion | 1.3.6.1.4.1.1588.2.1.1.1.1.6 | DisplayString (SIZE (0..24)) | RO | v8.1.2g | |||||||||||||||||
scalar · DisplayString (SIZE (0..24)) · read-only · current The current version of the firwmare. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SswOperStatus | 1.3.6.1.4.1.1588.2.1.1.1.1.7 | INTEGER | RO | online(1) | |||||||||||||||||
scalar · INTEGER · read-only · current The current operational status of the switch. The states are as follow: o online(1) means the switch is accessible by an external port; o offline(2) means the switch is not accessible; o testing(3) means the switch is in a built-in test mode and is not accessible by an external port; o faulty(4) means the switch is not operational.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SswSsn | 1.3.6.1.4.1.1588.2.1.1.1.1.10 | DisplayString (SIZE (0..128)) | RO | AB12C34 | |||||||||||||||||
scalar · DisplayString (SIZE (0..128)) · read-only · current The soft serial number of the switch. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SswFlashDLOperStatus | 1.3.6.1.4.1.1588.2.1.1.1.1.11 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The operational status of the FLASH. The operational states are as follow: o swCurrent(1) indicates that the FLASH contains the current firmware image or config file; o swFwUpgraded(2) state indicates that it contains the image upgraded from the swFlashDLHost.0.; o swCfUploaded(3) state indicates that the switch configuration file has been uploaded to the host; and o swCfDownloaded(4) state indicates that the switch configuration file has been downloaded from the host. o swFwCorrupted (5) state indicates that the firmware in the FLASH of the switch is corrupted.
| |||||||||||||||||||||
| SswFlashDLAdmStatus | 1.3.6.1.4.1.1588.2.1.1.1.1.12 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The state of the FLASH. o swCurrent(1) indicates that the FLASH contains the current firmware image or config file; o swFwUpgrade(2) means that the firmware in the FLASH is to be upgraded from the host specified; o swCfUpload(3) means that the switch config file is to be uploaded to the host specified; or o swCfDownload(4) means that the switch config file is to be downloaded from the host specified. o swFwCorrupted(5) state indicates that the firmware in the FLASH is corrupted. This value is for informational purpose only. However, set of swFlashDLAdmStatus to this value is not allowed. The host is specified in swFlashDLHost.0. In addition, user name is specified in swFlashDLUser.0, and the file name specified in swFlashDLFile.0. Reference the user manual on the following commands, o firmwareDownload, o configUpload, and o configDownload.
| |||||||||||||||||||||
| SswBeaconOperStatus | 1.3.6.1.4.1.1588.2.1.1.1.1.18 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The current operational status of the switch beacon. When the beacon is on, the LEDs on the front panel of the switch run alternately from left to right and right to left. The color is yellow. When the beacon is off, each LED will be in their its regular status indicating color and state.
| |||||||||||||||||||||
| SswBeaconAdmStatus | 1.3.6.1.4.1.1588.2.1.1.1.1.19 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The desired status of the switch beacon. When the beacon is set to on, the LEDs on the front panel of the switch run alternately from left to right and right to left. The color is yellow. When the beacon is set to off, each LED will be in its regular status indicating color and state.
| |||||||||||||||||||||
| SswDiagResult | 1.3.6.1.4.1.1588.2.1.1.1.1.20 | INTEGER | RO | sw-ok(1) | |||||||||||||||||
scalar · INTEGER · read-only · current The result of the power-on startup (POST) diagnostics.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SswNumSensors | 1.3.6.1.4.1.1588.2.1.1.1.1.21 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
scalar · Integer32 (0..2147483647) · read-only · current The number of sensors inside the switch. | |||||||||||||||||||||
| TswSensorTable | 1.3.6.1.4.1.1588.2.1.1.1.1.22 | NA | |||||||||||||||||||
table · not-accessible · current The table of sensor entries. | |||||||||||||||||||||
| RswSensorEntry | 1.3.6.1.4.1.1588.2.1.1.1.1.22.1 | NA | |||||||||||||||||||
| CswSensorIndex | 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1 | SwSensorIndex | RO | 1 | |||||||||||||||||
| CswSensorType | 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2 | INTEGER | RO | temperature(1) | |||||||||||||||||
| CswSensorStatus | 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3 | INTEGER | RO | nominal(4) | |||||||||||||||||
column · INTEGER · read-only · current The current status of the sensor.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CswSensorValue | 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4 | Integer32 | RO | 42 | |||||||||||||||||
column · Integer32 · read-only · current The current value (reading) of the sensor. The value, -2147483648, represents an unknown quantity. It also means that the sensor does not have the capability to measure the actual value. In V2.0, the temperature sensor value will be in Celsius; the fan value will be in RPM (revolution per minute); and the power supply sensor reading will be unknown. | |||||||||||||||||||||
| CswSensorInfo | 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5 | DisplayString (SIZE (0..255)) | RO | SLOT #0: TEMP #1 | |||||||||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current Additional displayable information on the sensor. In V2.x, it contains the sensor type and number in textual format. For example, 'Temp 3', 'Fan 6'. | |||||||||||||||||||||
| SswID | 1.3.6.1.4.1.1588.2.1.1.1.1.24 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The number of the logical switch (0/1). | |||||||||||||||||||||
| SswEtherIPAddress | 1.3.6.1.4.1.1588.2.1.1.1.1.25 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IP Address of the Ethernet interface of this logical switch. | |||||||||||||||||||||
| SswEtherIPMask | 1.3.6.1.4.1.1588.2.1.1.1.1.26 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IP Mask of the Ethernet interface of this logical switch. | |||||||||||||||||||||
| SswIPv6Address | 1.3.6.1.4.1.1588.2.1.1.1.1.29 | DisplayString | NA | ||||||||||||||||||
scalar · DisplayString · not-accessible · current IPV6 address. | |||||||||||||||||||||
| SswIPv6Status | 1.3.6.1.4.1.1588.2.1.1.1.1.30 | INTEGER | NA | ||||||||||||||||||
scalar · INTEGER · not-accessible · current The current status of ipv6 address.
| |||||||||||||||||||||
| NswFabric | 1.3.6.1.4.1.1588.2.1.1.1.2 | ||||||||||||||||||||
node · current The OID sub-tree for swFabric group. | |||||||||||||||||||||
| SswVfId | 1.3.6.1.4.1.1588.2.1.1.1.2.15 | Integer32 (0..255) | RO | ||||||||||||||||||
scalar · Integer32 (0..255) · read-only · current The Virtual fabric id. | |||||||||||||||||||||
| NswFCport | 1.3.6.1.4.1.1588.2.1.1.1.6 | ||||||||||||||||||||
node · current The OID sub-tree for swFCport group. | |||||||||||||||||||||
| TswFCPortTable | 1.3.6.1.4.1.1588.2.1.1.1.6.2 | NA | |||||||||||||||||||
table · not-accessible · current A table that contains, one entry for each switch port, configuration and service parameters of the port. | |||||||||||||||||||||
| RswFCPortEntry | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing the configuration and service parameters of the switch port.
| |||||||||||||||||||||
| CswFCPortIndex | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1 | SwPortIndex | RO | ||||||||||||||||||
column · SwPortIndex · read-only · current This object identifies the switch port index. Note that the value of a port index is 1 higher than the port number labeled on the front panel. E.g. port index 1 correspond to port number 0. | |||||||||||||||||||||
| CswFCPortType | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object identifies the type of switch port. It may be of type stitch(1), flannel(2), loom(3) , bloom(4),rdbloom(5) or wormhole(6).
| |||||||||||||||||||||
| CswFCPortPhyState | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object identifies the physical state of
the port:
noCard(1) no card present in this switch slot;
noTransceiver(2) no Transceiver module in this port.
noGbic(2) was used previously. Transceiver
is the generic name for GBIC, SFP etc.;
laserFault(3) the module is signaling a laser fault
(defective Transceiver);
noLight(4) the module is not receiving light;
noSync(5) the module is receiving light but is
out of sync;
inSync(6) the module is receiving light and is
in sync;
portFault(7) the port is marked faulty (defective
Transceiver, cable or device);
diagFault(8) the port failed diagnostics (defective
G_Port or FL_Port card or motherboard);
lockRef(9) the port is locking to the reference
signal.
validating(10) Validation is in progress
invalidModule(11) Invalid SFP
unknown(255) unknown.
| |||||||||||||||||||||
| CswFCPortOpStatus | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object identifies the operational status of the port. The online(1) state indicates that user frames can be passed. The unknown(0) state indicates that likely the port module is physically absent (see swFCPortPhyState).
| |||||||||||||||||||||
| CswFCPortAdmStatus | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The desired state of the port. A management station
may place the port in a desired state by setting this
object accordingly. The testing(3) state indicates that
no user frames can be passed. As the result of
either explicit management action or per configuration
information accessible by the switch, swFCPortAdmStatus is
then changed to either the online(1) or testing(3)
states, or remains in the offline(2) state.
| |||||||||||||||||||||
| CswFCPortLinkState | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object indicates the link state of the port.
The value may be:
enabled(1) - port is allowed to participate in the FC-PH
protocol with its attached port (or ports if it is
in a FC-AL loop);
disabled(2) - the port is not allowed to participate in
the FC-PH protocol with its attached port(s);
loopback(3) - the port may transmit frames through an
internal path to verify the health of the transmitter
and receiver path.
Note that when the port's link state changes, its
operational status (swFCPortOpStatus) will be affected.
| |||||||||||||||||||||
| CswFCPortTxType | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object indicates the media transmitter type of the port. The value may be: unknown(1) cannot determined to the port driver lw(2) long wave laser sw(3) short wave laser ld(4) long wave LED cu(5) copper (electrical).
| |||||||||||||||||||||
| CswFCPortTxWords | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object counts the number of Fibre Channel words that the port has transmitted. | |||||||||||||||||||||
| CswFCPortRxWords | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.12 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object counts the number of Fibre Channel words that the port has received. | |||||||||||||||||||||
| CswFCPortTxFrames | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.13 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object counts the number of (Fibre Channel) frames that the port has transmitted. | |||||||||||||||||||||
| CswFCPortRxFrames | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.14 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object counts the number of (Fibre Channel) frames that the port has received. | |||||||||||||||||||||
| CswFCPortRxC2Frames | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.15 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object counts the number of Class 2 frames that the port has received. | |||||||||||||||||||||
| CswFCPortRxC3Frames | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.16 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object counts the number of Class 3 frames that the port has received. | |||||||||||||||||||||
| CswFCPortRxLCs | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.17 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object counts the number of Link Control frames that the port has received. | |||||||||||||||||||||
| CswFCPortRxMcasts | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.18 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object counts the number of Multicast frames that the port has received. | |||||||||||||||||||||
| CswFCPortTooManyRdys | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.19 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object counts the number of times when RDYs exceeds the frames received. | |||||||||||||||||||||
| CswFCPortNoTxCredits | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.20 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object counts the number of times when the transmit credit has reached zero. | |||||||||||||||||||||
| CswFCPortRxEncInFrs | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.21 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object counts the number of encoding error or disparity error inside frames received. | |||||||||||||||||||||
| CswFCPortRxCrcs | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.22 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object counts the number of CRC errors detected for frames received. | |||||||||||||||||||||
| CswFCPortRxTruncs | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.23 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object counts the number of truncated frames that the port has received. | |||||||||||||||||||||
| CswFCPortRxTooLongs | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.24 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object counts the number of received frames that are too long. | |||||||||||||||||||||
| CswFCPortRxBadEofs | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.25 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object counts the number of received frames that have bad EOF delimiter. | |||||||||||||||||||||
| CswFCPortRxEncOutFrs | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.26 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object counts the number of encoding error or disparity error outside frames received. | |||||||||||||||||||||
| CswFCPortRxBadOs | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.27 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object counts the number of invalid Ordered Sets received. | |||||||||||||||||||||
| CswFCPortC3Discards | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.28 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object counts the number of Class 3 frames that the port has discarded. | |||||||||||||||||||||
| CswFCPortMcastTimedOuts | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.29 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object counts the number of Multicast frames that has been timed out. | |||||||||||||||||||||
| CswFCPortTxMcasts | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.30 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object counts the number of Multicast frames that has been transmitted. | |||||||||||||||||||||
| CswFCPortLipIns | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.31 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object counts the number of Loop Initializations that has been initiated by loop devices attached. | |||||||||||||||||||||
| CswFCPortLipOuts | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.32 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object counts the number of Loop Initializations that has been initiated by the port. | |||||||||||||||||||||
| CswFCPortLipLastAlpa | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.33 | OCTET STRING (SIZE (4)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (4)) · read-only · current This object indicates the Physical Address (AL_PA) of the loop device that initiated the last Loop Initialization. | |||||||||||||||||||||
| CswFCPortWwn | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.34 | OCTET STRING (SIZE (8)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (8)) · read-only · current The World_wide_Name of the Fibre Channel port. The contents of an instance are in the IEEE extended format as specified in FC-PH; the 12-bit port identifier represents the port number within the switch. | |||||||||||||||||||||
| CswFCPortSpeed | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.35 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The desired baud rate for the port. It can have the values of 1GB (1), 2GB (2), Auto-Negotiate (3), 4GB (4), 8GB (5), or 10GB (6). Some of the above values may not be supported by all type of switches.
| |||||||||||||||||||||
| CswFCPortName | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36 | DisplayString (SIZE (0..255)) | RO | Port0 | |||||||||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current A string indicates the name of the addressed port. The names should be persistent across switch reboots. Port names do not have to be unique within a switch or within a fabric. | |||||||||||||||||||||
| CswFCPortSpecifier | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.37 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current This string indicates the physical port number of the addressed port. The format of the string is: <slot>/port, where 'slot' being present only for bladed systems. | |||||||||||||||||||||
| CswFCPortFlag | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.38 | FcPortFlag | RO | ||||||||||||||||||
column · FcPortFlag · read-only · current A bit map of port status flags which includes the information of port type. Currently this will indicate if the port is virtual or physical. | |||||||||||||||||||||
| CswFCPortBrcdType | 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.39 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The Brocade port type.
| |||||||||||||||||||||
| NswEvent | 1.3.6.1.4.1.1588.2.1.1.1.8 | ||||||||||||||||||||
node · current The OID sub-tree for swEvent group. | |||||||||||||||||||||
| TswEventTable | 1.3.6.1.4.1.1588.2.1.1.1.8.5 | NA | |||||||||||||||||||
table · not-accessible · current The table of event entries. | |||||||||||||||||||||
| RswEventEntry | 1.3.6.1.4.1.1588.2.1.1.1.8.5.1 | NA | |||||||||||||||||||
| CswEventIndex | 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.1 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current This object identifies the event entry. | |||||||||||||||||||||
| CswEventTimeInfo | 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.2 | DisplayString (SIZE (0..64)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..64)) · read-only · current This object identifies the date and time when this event occurred, in textual format. | |||||||||||||||||||||
| CswEventLevel | 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object identifies the severity level of this event entry.
| |||||||||||||||||||||
| CswEventRepeatCount | 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.4 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current This object identifies how many times this particular event has occurred. | |||||||||||||||||||||
| CswEventDescr | 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current This object identifies the textual description of the event. | |||||||||||||||||||||
| CswEventVfId | 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.6 | Integer32 (0..255) | RO | ||||||||||||||||||
column · Integer32 (0..255) · read-only · current This object identifies the Virtual fabric id. | |||||||||||||||||||||
Textual conventions
FcPortFlagBitsphysical(0)virtual(1)Represents the port status for a FC Flag. Currently this will indicate if the port is virtual or physical.
Traps / Notifications
- swEventTrap
1.3.6.1.4.1.1588.2.1.1.1.0.4 - swFCPortScn
1.3.6.1.4.1.1588.2.1.1.1.0.3 - swStateChangeTrap
1.3.6.1.4.1.1588.2.1.1.1.0.12