FOUNDRY-SN-SWITCH-GROUP-MIB
Brocade Communication Systems, Inc. (formerly 'Foundry Networks, Inc.')Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
snmptranslate -m FOUNDRY-SN-SWITCH-GROUP-MIB -Tpsnmpwalk -v2c -c <community> -m FOUNDRY-SN-SWITCH-GROUP-MIB <host> 1.3.6.1.4.1.1991.1.1.3Imports
| FOUNDRY-SN-AGENT-MIB | DisplayString, MacAddress |
|---|---|
| FOUNDRY-SN-ROOT-MIB | switch |
| IF-MIB | InterfaceIndex, ifIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IsnSwitch | 1.3.6.1.4.1.1991.1.1.3 | ||||||||||||||||||||
identity Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | |||||||||||||||||||||
| NsnSwInfo | 1.3.6.1.4.1.1991.1.1.3.1 | ||||||||||||||||||||
| SsnSwGroupOperMode | 1.3.6.1.4.1.1991.1.1.3.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current noVLan(1) represents all switch ports with no virtual LAN by port (no Port VLAN), and with no tag assigned. vlanByPort(2) represents all switch ports with Basic VLAN (layer2 Switch).
| |||||||||||||||||||||
| SsnSwGroupIpL3SwMode | 1.3.6.1.4.1.1991.1.1.3.1.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The Switch Group is configured with the Layer3 IP Switch mode either enabled or disabled and the default is disabled mode. enabled(1)...........activate Layer3 IP Switch disabled(0)..........disable Layer3 IP Switch
| |||||||||||||||||||||
| SsnSwGroupIpMcastMode | 1.3.6.1.4.1.1991.1.1.3.1.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The Switch Group is configured with the IP Multicast (IGMP snooping) mode either enabled (active or passive) or disabled and the default is disabled mode. disabled(0)......IP Multicast is disabled active(1)........this device generates IGMP queries, IP Multicast is enabled passive(2).......this device listens for IGMP packets, IP Multicast is enabled
| |||||||||||||||||||||
| SsnSwGroupDefaultCfgMode | 1.3.6.1.4.1.1991.1.1.3.1.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The Switch Group is configured with the Default configuration. If the default configuration gets overwritten, the state will change to non-default. default(1)...........default configuration nonDefault(2)..........non default configuration
| |||||||||||||||||||||
| SsnSwGroupSwitchAgeTime | 1.3.6.1.4.1.1991.1.1.3.1.5 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Sets the aging period for ports on the device, defining how long a port address remains active in the address table. Valid values: 0 = no aging, or 67 - 65535 seconds Default: 300 seconds. | |||||||||||||||||||||
| SsnVLanGroupVlanCurEntry | 1.3.6.1.4.1.1991.1.1.3.1.6 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The current total entry number of VLANs are configured. | |||||||||||||||||||||
| SsnVLanGroupSetAllVLan | 1.3.6.1.4.1.1991.1.1.3.1.7 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current The value of this object is the VLanIndex of a particalur entry in snVLanByPortCfgTable (snVLanByPortCfgVLanId). All the attributes of that row of table except PortMask will be used to set the same attributes for the entire VLan group. VLanId and PortMask must be set for that particular entry prior to setting this object. Switch software will base on that VLAN information to set the entire VLAN. Note: All the intended attributes of the given row of the table (given VLAN) must be set prior setting this object. When this object is set, Set-All-VLAN action will take place simultaneously. The previous setting will be overwritten by the new one. | |||||||||||||||||||||
| SsnSwPortSetAll | 1.3.6.1.4.1.1991.1.1.3.1.8 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current The value of this object is the index number of the snSwPortInfoTable (snSwPortInfoPortIndex). snSwPortInfoMonitorMode, snSwPortInfoTagMode, snSwPortInfoChnMode, snSwPortInfoSpeed, snSwPortInfoAdminStatus are all the read-write attributes of that row of table. They will be used to set the same attributes for all the ports in the system. Note: prior setting this object, all the intended attributes of the given row of the table must be set. Otherwise, the current data of the row will be used to set the entire port-table. The previous setting will be overwritten by the new one. | |||||||||||||||||||||
| SsnFdbTableCurEntry | 1.3.6.1.4.1.1991.1.1.3.1.9 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The current total entry number of FDB are configured. | |||||||||||||||||||||
| SsnFdbTableStationFlush | 1.3.6.1.4.1.1991.1.1.3.1.10 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The following values of the flush state can only be read: normal(1)... normal state error(2)... operation failed flushing(4)... in process The following value can be written: flush(3).....do flush The agent will return a response even before the flush is done. And the read value will be flushing until flush is done. And the flush request will be rejected until error or normal.
| |||||||||||||||||||||
| SsnPortStpSetAll | 1.3.6.1.4.1.1991.1.1.3.1.11 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current The value of this object is 1 which means invoking Port STP Set-all command. The snPortStpPriority, snPortStpPathCost, the read-write STP related attributes of the first row of table will be used to set the same attributes for all the ports in the system. Note: prior setting this object, all the intended attributes of the given row of the table must be set. Otherwise, the current data of the row will be used to set the entire port-table. The previous setting will be overwritten by the new one. | |||||||||||||||||||||
| SsnSwProbePortNum | 1.3.6.1.4.1.1991.1.1.3.1.12 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current A chassis switch probe port is operated as a traffic analyzer port and only one port can be assigned in the chassis. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number. A stackable switch is only assigned with one probe port as a traffic analyzer. | |||||||||||||||||||||
| SsnSw8021qTagMode | 1.3.6.1.4.1.1991.1.1.3.1.13 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The Switch Group is configured with the IEEE802.1q Tagging mode either enabled or disabled and the default is disabled mode. enabled(1)...........activate IEEE802.1q Tagging mode. disabled(0)..........no IEEE802.1q Tagging.
| |||||||||||||||||||||
| SsnSwGlobalStpMode | 1.3.6.1.4.1.1991.1.1.3.1.14 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Spanning Tree System Global Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. enabled(1)...........activate Spanning Tree disabled(0)..........no Spanning Tree
| |||||||||||||||||||||
| SsnSwIpMcastQuerierMode | 1.3.6.1.4.1.1991.1.1.3.1.15 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The IP Multicast pruning mode is configured either Non-Querier or Querier mode and the default is querier mode. querier(1)...........when prunning traffic locally within the VLAN. nonQuerier(2)........when running with a multicast capable router in the network.
| |||||||||||||||||||||
| SsnSwViolatorPortNumber | 1.3.6.1.4.1.1991.1.1.3.1.17 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The port number of the switch or router that received a violator packet. It is included in the locked address violation trap. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only). | |||||||||||||||||||||
| SsnSwViolatorMacAddress | 1.3.6.1.4.1.1991.1.1.3.1.18 | MacAddress | RO | ||||||||||||||||||
scalar · MacAddress · read-only · current The source address of the violator packet received by the switch or router. It is included in the locked address violation trap. | |||||||||||||||||||||
| SsnVLanGroupVlanMaxEntry | 1.3.6.1.4.1.1991.1.1.3.1.19 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current The maximum number of VLAN entries are allowed to configure. | |||||||||||||||||||||
| SsnSwEosBufferSize | 1.3.6.1.4.1.1991.1.1.3.1.20 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current A specific buffer size for all the different EOS buffers. | |||||||||||||||||||||
| SsnVLanByPortEntrySize | 1.3.6.1.4.1.1991.1.1.3.1.21 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The size of each VLAN table entry. | |||||||||||||||||||||
| SsnSwPortEntrySize | 1.3.6.1.4.1.1991.1.1.3.1.22 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The size of each port table entry. | |||||||||||||||||||||
| SsnFdbStationEntrySize | 1.3.6.1.4.1.1991.1.1.3.1.23 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The size of each Fdb station table entry. | |||||||||||||||||||||
| SsnPortStpEntrySize | 1.3.6.1.4.1.1991.1.1.3.1.24 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The size of each port stp table entry. | |||||||||||||||||||||
| SsnSwEnableBridgeNewRootTrap | 1.3.6.1.4.1.1991.1.1.3.1.25 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates whether the SNMP agent process is permitted to generate bridge new root traps.
| |||||||||||||||||||||
| SsnSwEnableBridgeTopoChangeTrap | 1.3.6.1.4.1.1991.1.1.3.1.26 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates whether the SNMP agent process is permitted to generate bridge topology change traps.
| |||||||||||||||||||||
| SsnSwEnableLockedAddrViolationTrap | 1.3.6.1.4.1.1991.1.1.3.1.27 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates whether the SNMP agent process is permitted to generate locked address violation traps.
| |||||||||||||||||||||
| SsnSwIpxL3SwMode | 1.3.6.1.4.1.1991.1.1.3.1.28 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The Switch Group is configured with the Layer3 IPX Switch mode either enabled or disabled and the default is disabled mode. enabled(1)...........activate Layer3 Switch disabled(0)..........disable Layer3 Switch
| |||||||||||||||||||||
| SsnVLanByIpSubnetMaxSubnets | 1.3.6.1.4.1.1991.1.1.3.1.29 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The maximum number of subnets for each IP VLAN. | |||||||||||||||||||||
| SsnVLanByIpxNetMaxNetworks | 1.3.6.1.4.1.1991.1.1.3.1.30 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The maximum number of networks for each IPX VLAN. | |||||||||||||||||||||
| SsnSwProtocolVLanMode | 1.3.6.1.4.1.1991.1.1.3.1.31 | INTEGER | RW | deprecated | |||||||||||||||||
scalar · INTEGER · read-write · deprecated disabled(0) - represents system with Protocol VLAN disabled. enabled(1) - represents system with Protocol VLAN enabled (Layer3 VLAN).
| |||||||||||||||||||||
| SsnMacStationVLanId | 1.3.6.1.4.1.1991.1.1.3.1.32 | INTEGER (0..4095) | RW | deprecated | |||||||||||||||||
scalar · INTEGER (0..4095) · read-write · deprecated This VLAN ID controls filtering of the Forwarding Database table in the standard Bridge MIB (dot1dTpFdbTable). Since the dot1dTpFdbTable contains MAC addresses associated with each of the ports in the bridge, and each MAC address can be associated with different VLANs, the snMacStationVLanId can be used by users to specify which VLAN's MAC Station information the dot1dTpFdbTable should provide. If this variable is set to zero (the default value), all MAC station entries will be returned when the dot1dTpFdbTable is retrieved. The VLAN-aware dot1qTpFdbTable described in RFC 2674 should be used as a replacement for this variable. | |||||||||||||||||||||
| SsnSwClearCounters | 1.3.6.1.4.1.1991.1.1.3.1.33 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current valid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clear counter command of the following counters: Dot3, MIB2, IP and IPX counters for all ports.
| |||||||||||||||||||||
| SsnSw8021qTagType | 1.3.6.1.4.1.1991.1.1.3.1.34 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current The IEEE802.1q tag type embedded in the length/type field of an Ethernet packet. It specifies that the 2 octets after the length/type field in an Ethernet packet is the tag value. | |||||||||||||||||||||
| SsnSwBroadcastLimit | 1.3.6.1.4.1.1991.1.1.3.1.35 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Limit the number of broadcast packets to forward out of the switch ports. This object specifies the number of broadcast packets per second. Setting a value of 0 to this object disables the limitation check. | |||||||||||||||||||||
| SsnSwMaxMacFilterPerSystem | 1.3.6.1.4.1.1991.1.1.3.1.36 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The maximum number of MAC Filters per system in the MAC Filter table. | |||||||||||||||||||||
| SsnSwMaxMacFilterPerPort | 1.3.6.1.4.1.1991.1.1.3.1.37 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The maximum number of MAC Filters per port in the Port MAC Access Filter table. | |||||||||||||||||||||
| SsnSwDefaultVLanId | 1.3.6.1.4.1.1991.1.1.3.1.38 | INTEGER (1..4095) | RW | ||||||||||||||||||
scalar · INTEGER (1..4095) · read-write · current The VLAN ID of the DEFAULT PORT-VLAN. | |||||||||||||||||||||
| SsnSwGlobalAutoNegotiate | 1.3.6.1.4.1.1991.1.1.3.1.39 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This feature only applies to Gigabit Ethernet ports. If set to disable(0), all Gigabit Ethernet ports will be put to non- negotiation mode. If set to enable(1), all Gigabit Ethernet ports will start auto-negotiation indefinitely until succeed. If set to negFullAuto(2), all Gigabit Ethernet ports will start with auto-negotiation, if the negotiation failed, then they will automatically switch to non-negotiation mode. Stackable products (except TurboIron 8) Gigabit Ethernet ports do not support negFullAuto(2). If the snSwPortInfoAutoNegotiate value of a port was not set to global, this global value does not apply to the negotiation mode of that port.
| |||||||||||||||||||||
| SsnSwQosMechanism | 1.3.6.1.4.1.1991.1.1.3.1.40 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates whether the qos mechanism is strict or weighted.
| |||||||||||||||||||||
| SsnSwSingleStpMode | 1.3.6.1.4.1.1991.1.1.3.1.41 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Single Spanning Tree System Mode in the Switch Group can be set either enabled or disabled and the default is disabled mode. disable(0)...........no Single Spanning Tree enableStp(1).........activate SSTP control vlan to run Spanning Tree enableRstp(2)........activate SSTP control vlan to run Rapid Spanning Tree
| |||||||||||||||||||||
| SsnSwFastStpMode | 1.3.6.1.4.1.1991.1.1.3.1.42 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Fast Spanning Tree System Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. enabled(1)...........activate Fast Spanning Tree disabled(0)..........no Fast Spanning Tree
| |||||||||||||||||||||
| SsnSwViolatorIfIndex | 1.3.6.1.4.1.1991.1.1.3.1.43 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The port number of the switch or router that received a violator packet. It is included in the locked address violation trap. | |||||||||||||||||||||
| SsnSwSingleStpVLanId | 1.3.6.1.4.1.1991.1.1.3.1.44 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The VLAN ID of the Single Spanning Tree VLAN if Single Spanning Tree was enabled. This object returns zero if Single Spanning Tree was disabled. | |||||||||||||||||||||
| SsnSwJumboMode | 1.3.6.1.4.1.1991.1.1.3.1.45 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The jumbo mode on the Switch can be set either enabled or disabled and the default is disabled mode. The jumbo frame (10200 bytes) can be supported if this mode is enabled. Please note that enabling/disabling jumbo mode will be effected only after saving configuration and system reload . disabled(0)..........disable jumbo mode enabled(1)...........enable jumbo mode
| |||||||||||||||||||||
| SsnSwACLPerPortPerVlanMode | 1.3.6.1.4.1.1991.1.1.3.1.46 | INTEGER | RW | obsolete | |||||||||||||||||
scalar · INTEGER · read-write · obsolete The ACL Per port per VLAN mode on the Switch can be set either enabled or disabled and the default is disabled mode. Allow the access list on selective ports of VLAN or VE if this mode is enabled. Please note that enabling/disabling ACL Per port per VLAN will be effected only after saving configuration and system reload disabled(0)..........disable ACL per port per VLAN enabled(1)...........enable ACL per port per VLAN This MIB object is obsoleted from FI-8095 release
| |||||||||||||||||||||
| SsnSwIpMcastVersion | 1.3.6.1.4.1.1991.1.1.3.1.47 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Multicast version at the globle level can be set 2 or 3, and the default is 2 | |||||||||||||||||||||
| SsnSwMgmtVlan | 1.3.6.1.4.1.1991.1.1.3.1.48 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current VLAN can be a part of the management VLAN. It dedicates this VLAN for management purpose. The value 0 means that the management VLAN is not configurated, or is not applicable, e.g. in Router image | |||||||||||||||||||||
| NsnVLanInfo | 1.3.6.1.4.1.1991.1.1.3.2 | ||||||||||||||||||||
| TsnVLanByPortTable | 1.3.6.1.4.1.1991.1.1.3.2.1 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated If snSwGroupOperMode is configured as basic mode which is VLAN by Port, Layer2 switching, then this table is valid. Each VLAN switch port could have a number of VLAN IDs. | |||||||||||||||||||||
| RsnVLanByPortEntry | 1.3.6.1.4.1.1991.1.1.3.2.1.1 | NA | deprecated | ||||||||||||||||||
row · not-accessible · deprecated An entry in the VLAN By Port Information table. snVLanByPortVLanIndex = 1 and with snVLanByPortVLanId = 1 together implies all attributes applying to the Global switch group i.e. noVLan. A SNMP SET PDU for a row of the snVLanByPortTable requires the entired sequence of the MIB Objects in each snVLanByPortEntry stored in one PDU. Otherwise, GENERR return-value will be returned. | |||||||||||||||||||||
| CsnVLanByPortVLanIndex | 1.3.6.1.4.1.1991.1.1.3.2.1.1.1 | INTEGER (1..4095) | RO | deprecated | |||||||||||||||||
column · INTEGER (1..4095) · read-only · deprecated The VLAN ID index must not be greater than the snVLanGroupVlanMaxEntry. Each VLAN Identifier can have a membership of multiple ports. | |||||||||||||||||||||
| CsnVLanByPortVLanId | 1.3.6.1.4.1.1991.1.1.3.2.1.1.2 | INTEGER (1..4095) | RW | deprecated | |||||||||||||||||
column · INTEGER (1..4095) · read-write · deprecated The VLAN ID index to the VLAN By Port Info Table. Each VLAN Identifier can have a membership of multiple ports. | |||||||||||||||||||||
| CsnVLanByPortPortMask | 1.3.6.1.4.1.1991.1.1.3.2.1.1.3 | PortMask | RW | deprecated | |||||||||||||||||
column · PortMask · read-write · deprecated The Standand-alone switch VLAN port membership. (It was obsoleted for Chassis Product) | |||||||||||||||||||||
| CsnVLanByPortQos | 1.3.6.1.4.1.1991.1.1.3.2.1.1.4 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated The Stand alone stackable switch VLAN Priority values are: low(0) -- low prority high(1) -- high prority. The BigIron switch VLAN Priority values are: level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)
| |||||||||||||||||||||
| CsnVLanByPortStpMode | 1.3.6.1.4.1.1991.1.1.3.2.1.1.5 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Spanning Tree Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. disable(0)...........no Spanning Tree enableStp(1).........activate Spanning Tree enableRstp(2)........activate Rapid Spanning Tree
| |||||||||||||||||||||
| CsnVLanByPortStpPriority | 1.3.6.1.4.1.1991.1.1.3.2.1.1.6 | INTEGER (0..65535) | RW | deprecated | |||||||||||||||||
column · INTEGER (0..65535) · read-write · deprecated dot1dStpPriority : The value of the write-able portion of the Stp ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of the base bridge address - dot1dBaseBridgeAddress. | |||||||||||||||||||||
| CsnVLanByPortStpGroupMaxAge | 1.3.6.1.4.1.1991.1.1.3.2.1.1.7 | INTEGER (0..40) | RW | deprecated | |||||||||||||||||
column · INTEGER (0..40) · read-write · deprecated dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB). The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. | |||||||||||||||||||||
| CsnVLanByPortStpGroupHelloTime | 1.3.6.1.4.1.1991.1.1.3.2.1.1.8 | INTEGER (0..10) | RW | deprecated | |||||||||||||||||
column · INTEGER (0..10) · read-write · deprecated dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB). The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. | |||||||||||||||||||||
| CsnVLanByPortStpGroupForwardDelay | 1.3.6.1.4.1.1991.1.1.3.2.1.1.9 | INTEGER (0..30) | RW | deprecated | |||||||||||||||||
column · INTEGER (0..30) · read-write · deprecated dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB). The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. | |||||||||||||||||||||
| CsnVLanByPortRowStatus | 1.3.6.1.4.1.1991.1.1.3.2.1.1.10 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid
| |||||||||||||||||||||
| CsnVLanByPortOperState | 1.3.6.1.4.1.1991.1.1.3.2.1.1.11 | INTEGER | RO | deprecated | |||||||||||||||||
column · INTEGER · read-only · deprecated By default, this mode is set to notActivated(0). notActivated(0)...the VLAN entry is not activated and not in running mode. activated(1)......the VLAN entry is activated and in running mode
| |||||||||||||||||||||
| CsnVLanByPortBaseNumPorts | 1.3.6.1.4.1.1991.1.1.3.2.1.1.12 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated The number of ports controlled by this bridging entity. | |||||||||||||||||||||
| CsnVLanByPortBaseType | 1.3.6.1.4.1.1991.1.1.3.2.1.1.13 | INTEGER | RO | deprecated | |||||||||||||||||
column · INTEGER · read-only · deprecated Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the port table for the given type.
| |||||||||||||||||||||
| CsnVLanByPortStpProtocolSpecification | 1.3.6.1.4.1.1991.1.1.3.2.1.1.14 | INTEGER | RO | deprecated | |||||||||||||||||
column · INTEGER · read-only · deprecated An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined.
| |||||||||||||||||||||
| CsnVLanByPortStpMaxAge | 1.3.6.1.4.1.1991.1.1.3.2.1.1.15 | Timeout | RO | deprecated | |||||||||||||||||
column · Timeout · read-only · deprecated dot1dStpMaxAge: From RFC1493(Bridge MIB). The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using. | |||||||||||||||||||||
| CsnVLanByPortStpHelloTime | 1.3.6.1.4.1.1991.1.1.3.2.1.1.16 | Timeout | RO | deprecated | |||||||||||||||||
column · Timeout · read-only · deprecated dot1dStpHelloTime: From RFC1493(Bridge MIB). The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using. | |||||||||||||||||||||
| CsnVLanByPortStpHoldTime | 1.3.6.1.4.1.1991.1.1.3.2.1.1.17 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated dot1dStpHoldTime: From RFC1493(Bridge MIB). This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second. | |||||||||||||||||||||
| CsnVLanByPortStpForwardDelay | 1.3.6.1.4.1.1991.1.1.3.2.1.1.18 | Timeout | RO | deprecated | |||||||||||||||||
column · Timeout · read-only · deprecated dot1dStpForwardDelay: From RFC1493(Bridge MIB). This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.] | |||||||||||||||||||||
| CsnVLanByPortStpTimeSinceTopologyChange | 1.3.6.1.4.1.1991.1.1.3.2.1.1.19 | TimeTicks | RO | deprecated | |||||||||||||||||
column · TimeTicks · read-only · deprecated The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. | |||||||||||||||||||||
| CsnVLanByPortStpTopChanges | 1.3.6.1.4.1.1991.1.1.3.2.1.1.20 | Counter32 | RO | deprecated | |||||||||||||||||
column · Counter32 · read-only · deprecated The total number of topology changes detected by this bridge since the management entity was last reset or initialized. | |||||||||||||||||||||
| CsnVLanByPortStpRootCost | 1.3.6.1.4.1.1991.1.1.3.2.1.1.21 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated dot1dStpRootCost: From RFC1493(Bridge MIB). The cost of the path to the root as seen from this bridge. | |||||||||||||||||||||
| CsnVLanByPortStpRootPort | 1.3.6.1.4.1.1991.1.1.3.2.1.1.22 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated dot1dStpRootPort: From RFC1493(Bridge MIB). The port number of the port which offers the lowest cost path from this bridge to the root bridge. | |||||||||||||||||||||
| CsnVLanByPortStpDesignatedRoot | 1.3.6.1.4.1.1991.1.1.3.2.1.1.23 | BridgeId | RO | deprecated | |||||||||||||||||
column · BridgeId · read-only · deprecated dot1dStpDesignatedRoot: From RFC1493(Bridge MIB). The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node. | |||||||||||||||||||||
| CsnVLanByPortBaseBridgeAddress | 1.3.6.1.4.1.1991.1.1.3.2.1.1.24 | MacAddress | RO | deprecated | |||||||||||||||||
column · MacAddress · read-only · deprecated The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with dot1dStpPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol. | |||||||||||||||||||||
| CsnVLanByPortVLanName | 1.3.6.1.4.1.1991.1.1.3.2.1.1.25 | DisplayString (SIZE (0..32)) | RW | deprecated | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-write · deprecated VLAN Community Name string. | |||||||||||||||||||||
| CsnVLanByPortRouterIntf | 1.3.6.1.4.1.1991.1.1.3.2.1.1.26 | Integer32 | RW | deprecated | |||||||||||||||||
column · Integer32 · read-write · deprecated Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured. | |||||||||||||||||||||
| CsnVLanByPortChassisPortMask | 1.3.6.1.4.1.1991.1.1.3.2.1.1.27 | OCTET STRING | RW | deprecated | |||||||||||||||||
column · OCTET STRING · read-write · deprecated The Chassis VLAN switch port membership. (It was obsoleted after release 07100, replaced by snVLanByPortPortList) | |||||||||||||||||||||
| CsnVLanByPortPortList | 1.3.6.1.4.1.1991.1.1.3.2.1.1.28 | OCTET STRING | RW | deprecated | |||||||||||||||||
column · OCTET STRING · read-write · deprecated A list of port indices which are the port membership of a VLAN By Port. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. | |||||||||||||||||||||
| TsnVLanByProtocolTable | 1.3.6.1.4.1.1991.1.1.3.2.2 | NA | |||||||||||||||||||
table · not-accessible · current . | |||||||||||||||||||||
| RsnVLanByProtocolEntry | 1.3.6.1.4.1.1991.1.1.3.2.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the VLAN By Protocol Configuration table. | |||||||||||||||||||||
| CsnVLanByProtocolVLanId | 1.3.6.1.4.1.1991.1.1.3.2.2.1.1 | INTEGER (1..4095) | RO | ||||||||||||||||||
column · INTEGER (1..4095) · read-only · current The VLAN ID index to both of the VLAN By Port Info Table and this table. | |||||||||||||||||||||
| CsnVLanByProtocolIndex | 1.3.6.1.4.1.1991.1.1.3.2.2.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The following IP/IPX protocol VLAN types are operated in Layer3 VLAN such as : ip(1), ipx(2), ipv6(7) The following are operated in Layer2 bridging such as: appleTalk(3), decNet(4), netBios(5), others(6) -- other protocols which are defined here.
| |||||||||||||||||||||
| CsnVLanByProtocolDynamic | 1.3.6.1.4.1.1991.1.1.3.2.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only.
| |||||||||||||||||||||
| CsnVLanByProtocolStaticMask | 1.3.6.1.4.1.1991.1.1.3.2.2.1.4 | PortMask | RW | deprecated | |||||||||||||||||
column · PortMask · read-write · deprecated The Standand-alone switch Protocol VLAN port membership applied in static mode. (It was obsoleted for Chassis Product) | |||||||||||||||||||||
| CsnVLanByProtocolExcludeMask | 1.3.6.1.4.1.1991.1.1.3.2.2.1.5 | PortMask | RW | deprecated | |||||||||||||||||
column · PortMask · read-write · deprecated The Standand-alone switch Protocol VLAN port membership applied in exclusive mode. (It was obsoleted for Chassis Product) | |||||||||||||||||||||
| CsnVLanByProtocolRouterIntf | 1.3.6.1.4.1.1991.1.1.3.2.2.1.6 | INTEGER (1..60) | RW | ||||||||||||||||||
column · INTEGER (1..60) · read-write · current Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured. | |||||||||||||||||||||
| CsnVLanByProtocolRowStatus | 1.3.6.1.4.1.1991.1.1.3.2.2.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid
| |||||||||||||||||||||
| CsnVLanByProtocolDynamicMask | 1.3.6.1.4.1.1991.1.1.3.2.2.1.8 | PortMask | RO | deprecated | |||||||||||||||||
column · PortMask · read-only · deprecated The Standand-alone switch Protocol VLAN active port membership. (It was obsoleted for Chassis Product) | |||||||||||||||||||||
| CsnVLanByProtocolChassisStaticMask | 1.3.6.1.4.1.1991.1.1.3.2.2.1.9 | OCTET STRING (SIZE (32)) | RW | deprecated | |||||||||||||||||
column · OCTET STRING (SIZE (32)) · read-write · deprecated The Chassis Protocol VLAN port membership applied in static mode. (It was obsoleted after release 07100, replaced by snVLanByProtocolStaticPortList) | |||||||||||||||||||||
| CsnVLanByProtocolChassisExcludeMask | 1.3.6.1.4.1.1991.1.1.3.2.2.1.10 | OCTET STRING (SIZE (32)) | RW | deprecated | |||||||||||||||||
column · OCTET STRING (SIZE (32)) · read-write · deprecated The Chassis Protocol VLAN port membership applied in exclusive mode. (It was obsoleted after release 07100, replaced by snVLanByProtocolExcludePortList) | |||||||||||||||||||||
| CsnVLanByProtocolChassisDynamicMask | 1.3.6.1.4.1.1991.1.1.3.2.2.1.11 | OCTET STRING (SIZE (32)) | RO | deprecated | |||||||||||||||||
column · OCTET STRING (SIZE (32)) · read-only · deprecated The Chassis Protocol VLAN active port membership. (It was obsoleted after release 07100, replaced by snVLanByProtocolDynamicPortList) | |||||||||||||||||||||
| CsnVLanByProtocolVLanName | 1.3.6.1.4.1.1991.1.1.3.2.2.1.12 | DisplayString (SIZE (0..32)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-write · current VLAN Community Name string. | |||||||||||||||||||||
| CsnVLanByProtocolStaticPortList | 1.3.6.1.4.1.1991.1.1.3.2.2.1.13 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current A list of port indices which are the configured port membership of the Protocol VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. | |||||||||||||||||||||
| CsnVLanByProtocolExcludePortList | 1.3.6.1.4.1.1991.1.1.3.2.2.1.14 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current A list of port indices which are the excluded from port membership of the Protocol VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. | |||||||||||||||||||||
| CsnVLanByProtocolDynamicPortList | 1.3.6.1.4.1.1991.1.1.3.2.2.1.15 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current A list of port indices which are dynamically joining the port membership of the Protocol VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. | |||||||||||||||||||||
| TsnVLanByIpSubnetTable | 1.3.6.1.4.1.1991.1.1.3.2.3 | NA | |||||||||||||||||||
table · not-accessible · current An entry of the VLAN By IPX Network Number Table. | |||||||||||||||||||||
| RsnVLanByIpSubnetEntry | 1.3.6.1.4.1.1991.1.1.3.2.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the VLAN By IP Subnet Configuration table. | |||||||||||||||||||||
| CsnVLanByIpSubnetVLanId | 1.3.6.1.4.1.1991.1.1.3.2.3.1.1 | INTEGER (1..4095) | RO | ||||||||||||||||||
column · INTEGER (1..4095) · read-only · current The VLAN ID index to both of the VLAN By Port Info Table and this table. | |||||||||||||||||||||
| CsnVLanByIpSubnetIpAddress | 1.3.6.1.4.1.1991.1.1.3.2.3.1.2 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current Subnet IP address. | |||||||||||||||||||||
| CsnVLanByIpSubnetSubnetMask | 1.3.6.1.4.1.1991.1.1.3.2.3.1.3 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current Subnet mask associated with the Subnet IP address. | |||||||||||||||||||||
| CsnVLanByIpSubnetDynamic | 1.3.6.1.4.1.1991.1.1.3.2.3.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only.
| |||||||||||||||||||||
| CsnVLanByIpSubnetStaticMask | 1.3.6.1.4.1.1991.1.1.3.2.3.1.5 | PortMask | RW | deprecated | |||||||||||||||||
column · PortMask · read-write · deprecated The Standand-alone switch VLAN By Subnet port membership applied in static mode. (It was obsoleted for Chassis Product) | |||||||||||||||||||||
| CsnVLanByIpSubnetExcludeMask | 1.3.6.1.4.1.1991.1.1.3.2.3.1.6 | PortMask | RW | deprecated | |||||||||||||||||
column · PortMask · read-write · deprecated The Standand-alone switch VLAN By Subnet port membership applied in exclusive mode. (It was obsoleted for Chassis Product) | |||||||||||||||||||||
| CsnVLanByIpSubnetRouterIntf | 1.3.6.1.4.1.1991.1.1.3.2.3.1.7 | INTEGER (1..60) | RW | ||||||||||||||||||
column · INTEGER (1..60) · read-write · current Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured. | |||||||||||||||||||||
| CsnVLanByIpSubnetRowStatus | 1.3.6.1.4.1.1991.1.1.3.2.3.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid
| |||||||||||||||||||||
| CsnVLanByIpSubnetDynamicMask | 1.3.6.1.4.1.1991.1.1.3.2.3.1.9 | PortMask | RO | deprecated | |||||||||||||||||
column · PortMask · read-only · deprecated The Standand-alone switch VLAN By Subnet active port membership. (It was obsoleted for Chassis Product) | |||||||||||||||||||||
| CsnVLanByIpSubnetChassisStaticMask | 1.3.6.1.4.1.1991.1.1.3.2.3.1.10 | OCTET STRING (SIZE (32)) | RW | deprecated | |||||||||||||||||
column · OCTET STRING (SIZE (32)) · read-write · deprecated The Chassis VLAN By Subnet port membership applied in static mode. (It was obsoleted after release 07100, replaced by snVLanByIpSubnetStaticPortList) | |||||||||||||||||||||
| CsnVLanByIpSubnetChassisExcludeMask | 1.3.6.1.4.1.1991.1.1.3.2.3.1.11 | OCTET STRING (SIZE (32)) | RW | deprecated | |||||||||||||||||
column · OCTET STRING (SIZE (32)) · read-write · deprecated The Chassis VLAN By Subnet port membership applied in exclusive mode. (It was obsoleted after release 07100, replaced by snVLanByIpSubnetExcludePortList) | |||||||||||||||||||||
| CsnVLanByIpSubnetChassisDynamicMask | 1.3.6.1.4.1.1991.1.1.3.2.3.1.12 | OCTET STRING (SIZE (32)) | RO | deprecated | |||||||||||||||||
column · OCTET STRING (SIZE (32)) · read-only · deprecated The Chassis VLAN By Subnet active port membership. (It was obsoleted after release 07100, replaced by snVLanByIpSubnetDynamicPortList) | |||||||||||||||||||||
| CsnVLanByIpSubnetVLanName | 1.3.6.1.4.1.1991.1.1.3.2.3.1.13 | DisplayString (SIZE (0..32)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-write · current VLAN Community Name string. | |||||||||||||||||||||
| CsnVLanByIpSubnetStaticPortList | 1.3.6.1.4.1.1991.1.1.3.2.3.1.14 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current A list of port indices which are the configured port membership of the VLAN By IP Subnet. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. | |||||||||||||||||||||
| CsnVLanByIpSubnetExcludePortList | 1.3.6.1.4.1.1991.1.1.3.2.3.1.15 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current A list of port indices which are the excluded from port membership of the VLAN By IP Subnet. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. | |||||||||||||||||||||
| CsnVLanByIpSubnetDynamicPortList | 1.3.6.1.4.1.1991.1.1.3.2.3.1.16 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current A list of port indices which are dynamically joining the port membership of the VLAN By IP Subnet. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. | |||||||||||||||||||||
| TsnVLanByIpxNetTable | 1.3.6.1.4.1.1991.1.1.3.2.4 | NA | |||||||||||||||||||
table · not-accessible · current An entry of the VLAN By IPX Network Number Table. | |||||||||||||||||||||
| RsnVLanByIpxNetEntry | 1.3.6.1.4.1.1991.1.1.3.2.4.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the VLAN By Ipx Network Number Configuration table. | |||||||||||||||||||||
| CsnVLanByIpxNetVLanId | 1.3.6.1.4.1.1991.1.1.3.2.4.1.1 | INTEGER (1..4095) | RO | ||||||||||||||||||
column · INTEGER (1..4095) · read-only · current The VLAN ID index to both of the VLAN By Port Info Table and this table. | |||||||||||||||||||||
| CsnVLanByIpxNetNetworkNum | 1.3.6.1.4.1.1991.1.1.3.2.4.1.2 | OCTET STRING (SIZE (4)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (4)) · read-only · current IPX Network Number. | |||||||||||||||||||||
| CsnVLanByIpxNetFrameType | 1.3.6.1.4.1.1991.1.1.3.2.4.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The following IPX Frame types are operated in Layer3 VLAN such as : ipxEthernet8022(1), ipxEthernet8023(2), ipxEthernetII(3), ipxEthernetSnap(4). choose notApplicable(0) for other protocols. Note: Each Network Number can be assigned with one unique Frame type; Otherwise, a SNMP-SET error will be returned.
| |||||||||||||||||||||
| CsnVLanByIpxNetDynamic | 1.3.6.1.4.1.1991.1.1.3.2.4.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only.
| |||||||||||||||||||||
| CsnVLanByIpxNetStaticMask | 1.3.6.1.4.1.1991.1.1.3.2.4.1.5 | PortMask | RW | deprecated | |||||||||||||||||
column · PortMask · read-write · deprecated The VLAN By IPX network port membership applied in static mode. (It was obsoleted for Chassis Product) | |||||||||||||||||||||
| CsnVLanByIpxNetExcludeMask | 1.3.6.1.4.1.1991.1.1.3.2.4.1.6 | PortMask | RW | deprecated | |||||||||||||||||
column · PortMask · read-write · deprecated The VLAN By IPX network port membership applied in exclusive mode. (It was obsoleted for Chassis Product) | |||||||||||||||||||||
| CsnVLanByIpxNetRouterIntf | 1.3.6.1.4.1.1991.1.1.3.2.4.1.7 | INTEGER (1..60) | RW | ||||||||||||||||||
column · INTEGER (1..60) · read-write · current Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured. | |||||||||||||||||||||
| CsnVLanByIpxNetRowStatus | 1.3.6.1.4.1.1991.1.1.3.2.4.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid
| |||||||||||||||||||||
| CsnVLanByIpxNetDynamicMask | 1.3.6.1.4.1.1991.1.1.3.2.4.1.9 | PortMask | RO | deprecated | |||||||||||||||||
column · PortMask · read-only · deprecated The VLAN By IPX network active port membership. (It was obsoleted for Chassis Product) | |||||||||||||||||||||
| CsnVLanByIpxNetChassisStaticMask | 1.3.6.1.4.1.1991.1.1.3.2.4.1.10 | OCTET STRING (SIZE (32)) | RW | deprecated | |||||||||||||||||
column · OCTET STRING (SIZE (32)) · read-write · deprecated The Chassis VLAN By IPX network port membership applied in static mode. (It was obsoleted after release 07100, replaced by snVLanByIpxNetStaticPortList) | |||||||||||||||||||||
| CsnVLanByIpxNetChassisExcludeMask | 1.3.6.1.4.1.1991.1.1.3.2.4.1.11 | OCTET STRING (SIZE (32)) | RW | deprecated | |||||||||||||||||
column · OCTET STRING (SIZE (32)) · read-write · deprecated The Chassis VLAN By IPX network port membership applied in exclusive mode. (It was obsoleted after release 07100, replaced by snVLanByIpxNetExcludePortList) | |||||||||||||||||||||
| CsnVLanByIpxNetChassisDynamicMask | 1.3.6.1.4.1.1991.1.1.3.2.4.1.12 | OCTET STRING (SIZE (32)) | RO | deprecated | |||||||||||||||||
column · OCTET STRING (SIZE (32)) · read-only · deprecated The Chassis VLAN By IPX network active port membership. (It was obsoleted after release 07100, replaced by snVLanByIpxNetDynamicPortList) | |||||||||||||||||||||
| CsnVLanByIpxNetVLanName | 1.3.6.1.4.1.1991.1.1.3.2.4.1.13 | DisplayString (SIZE (0..32)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-write · current VLAN Community Name string. | |||||||||||||||||||||
| CsnVLanByIpxNetStaticPortList | 1.3.6.1.4.1.1991.1.1.3.2.4.1.14 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current A list of port indices which are the configured port membership of the VLAN By IPX network. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. | |||||||||||||||||||||
| CsnVLanByIpxNetExcludePortList | 1.3.6.1.4.1.1991.1.1.3.2.4.1.15 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current A list of port indices which are the excluded from port membership of the VLAN By IPX network. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. | |||||||||||||||||||||
| CsnVLanByIpxNetDynamicPortList | 1.3.6.1.4.1.1991.1.1.3.2.4.1.16 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current A list of port indices which are dynamically joining the port membership of the VLAN By IPX network. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. | |||||||||||||||||||||
| TsnVLanByATCableTable | 1.3.6.1.4.1.1991.1.1.3.2.5 | NA | |||||||||||||||||||
table · not-accessible · current A Table Of VLAN By AppleTalk Network Number. | |||||||||||||||||||||
| RsnVLanByATCableEntry | 1.3.6.1.4.1.1991.1.1.3.2.5.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry of the AppleTalk Cable VLAN table. | |||||||||||||||||||||
| CsnVLanByATCableVLanId | 1.3.6.1.4.1.1991.1.1.3.2.5.1.1 | INTEGER (1..4095) | RO | ||||||||||||||||||
column · INTEGER (1..4095) · read-only · current The VLAN ID of a PORT VLAN of which the AppleTalk Cable VLAN was attaching to. | |||||||||||||||||||||
| CsnVLanByATCableIndex | 1.3.6.1.4.1.1991.1.1.3.2.5.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current AppleTalk Cable VLAN index number. | |||||||||||||||||||||
| CsnVLanByATCableRouterIntf | 1.3.6.1.4.1.1991.1.1.3.2.5.1.3 | INTEGER (0..60) | RW | ||||||||||||||||||
column · INTEGER (0..60) · read-write · current A virtual router interface to the AppleTalk Cable VLAN, only router products accept the SNMP-SET operation. The value zero indicates that virtual router interface was not configured. | |||||||||||||||||||||
| CsnVLanByATCableRowStatus | 1.3.6.1.4.1.1991.1.1.3.2.5.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid
| |||||||||||||||||||||
| CsnVLanByATCableChassisStaticMask | 1.3.6.1.4.1.1991.1.1.3.2.5.1.5 | OCTET STRING (SIZE (32)) | RW | deprecated | |||||||||||||||||
column · OCTET STRING (SIZE (32)) · read-write · deprecated A list of ports which are statically configured to become port members of a VLAN. (It was obsoleted after release 07100, replaced by snVLanByATCableStaticPortList) | |||||||||||||||||||||
| CsnVLanByATCableVLanName | 1.3.6.1.4.1.1991.1.1.3.2.5.1.6 | DisplayString (SIZE (0..32)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-write · current VLAN Name string. | |||||||||||||||||||||
| CsnVLanByATCableStaticPortList | 1.3.6.1.4.1.1991.1.1.3.2.5.1.7 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current A list of port indices which are the configured port membership of the AppleTalk Cable VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. | |||||||||||||||||||||
| TsnVLanByPortMemberTable | 1.3.6.1.4.1.1991.1.1.3.2.6 | NA | |||||||||||||||||||
table · not-accessible · current Port VLAN (Layer 2 VLAN) port membership table. | |||||||||||||||||||||
| RsnVLanByPortMemberEntry | 1.3.6.1.4.1.1991.1.1.3.2.6.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry of the port VLAN membership table. | |||||||||||||||||||||
| CsnVLanByPortMemberVLanId | 1.3.6.1.4.1.1991.1.1.3.2.6.1.1 | INTEGER (1..4095) | RO | ||||||||||||||||||
column · INTEGER (1..4095) · read-only · current The VLAN identifier (VLAN ID). | |||||||||||||||||||||
| CsnVLanByPortMemberPortId | 1.3.6.1.4.1.1991.1.1.3.2.6.1.2 | InterfaceIndex | RO | ||||||||||||||||||
column · InterfaceIndex · read-only · current The ifIndex which is a member of the port VLAN. | |||||||||||||||||||||
| CsnVLanByPortMemberRowStatus | 1.3.6.1.4.1.1991.1.1.3.2.6.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid
| |||||||||||||||||||||
| CsnVLanByPortMemberTagMode | 1.3.6.1.4.1.1991.1.1.3.2.6.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configure an interface as tagged member of non-default VLAN, untagged VLAN membership of the interface will not be modified, be it is default-VLAN or non-default VLAN. Configure an interface as untagged member of non-default VLAN, that interface will be moved from default VLAN to the configured VLAN.
| |||||||||||||||||||||
| TsnVLanByPortCfgTable | 1.3.6.1.4.1.1991.1.1.3.2.7 | NA | |||||||||||||||||||
table · not-accessible · current Port VLAN (Layer 2 VLAN) configuration table. | |||||||||||||||||||||
| RsnVLanByPortCfgEntry | 1.3.6.1.4.1.1991.1.1.3.2.7.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry of the port VLAN configuration table. | |||||||||||||||||||||
| CsnVLanByPortCfgVLanId | 1.3.6.1.4.1.1991.1.1.3.2.7.1.1 | INTEGER (1..4095) | RO | ||||||||||||||||||
column · INTEGER (1..4095) · read-only · current The VLAN identifier (VLAN ID). | |||||||||||||||||||||
| CsnVLanByPortCfgQos | 1.3.6.1.4.1.1991.1.1.3.2.7.1.2 | PortQosTC | RW | ||||||||||||||||||
column · PortQosTC · read-write · current The Stand alone stackable switch VLAN Priority values are: level0(0) -- low prority level1(1) -- high prority. The BigIron switch VLAN Priority values are: level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7). Value invalid(127) is used by CES/CER products to signify that no QoS was specified for this VLAN. | |||||||||||||||||||||
| CsnVLanByPortCfgStpMode | 1.3.6.1.4.1.1991.1.1.3.2.7.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Spanning Tree Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. disable(0)...........no Spanning Tree enableStp(1).........activate Spanning Tree enableRstp(2)........activate Rapid Spanning Tree
| |||||||||||||||||||||
| CsnVLanByPortCfgStpPriority | 1.3.6.1.4.1.1991.1.1.3.2.7.1.4 | INTEGER (0..65535) | RW | ||||||||||||||||||
column · INTEGER (0..65535) · read-write · current dot1dStpPriority : The value of the write-able portion of the Stp ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of the base bridge address - dot1dBaseBridgeAddress. | |||||||||||||||||||||
| CsnVLanByPortCfgStpGroupMaxAge | 1.3.6.1.4.1.1991.1.1.3.2.7.1.5 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB). The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. Valid value between 6 and 40. Default is 20 seconds. Value 0 is returned if no STP is not configured for this vlan. | |||||||||||||||||||||
| CsnVLanByPortCfgStpGroupHelloTime | 1.3.6.1.4.1.1991.1.1.3.2.7.1.6 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB). The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. Valid value between 1 and 10. Default is 2 seconds. Value 0 is returned if no STP is not configured for this vlan. | |||||||||||||||||||||
| CsnVLanByPortCfgStpGroupForwardDelay | 1.3.6.1.4.1.1991.1.1.3.2.7.1.7 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB). The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. Valid value between 2 and 30. Default is 15 seconds. Value 0 is returned if no STP is not configured for this vlan. | |||||||||||||||||||||
| CsnVLanByPortCfgBaseNumPorts | 1.3.6.1.4.1.1991.1.1.3.2.7.1.8 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The number of ports controlled by this bridging entity. | |||||||||||||||||||||
| CsnVLanByPortCfgBaseType | 1.3.6.1.4.1.1991.1.1.3.2.7.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the port table for the given type.
| |||||||||||||||||||||
| CsnVLanByPortCfgStpProtocolSpecification | 1.3.6.1.4.1.1991.1.1.3.2.7.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined.
| |||||||||||||||||||||
| CsnVLanByPortCfgStpMaxAge | 1.3.6.1.4.1.1991.1.1.3.2.7.1.11 | Timeout | RO | ||||||||||||||||||
column · Timeout · read-only · current dot1dStpMaxAge: From RFC1493(Bridge MIB). The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using. | |||||||||||||||||||||
| CsnVLanByPortCfgStpHelloTime | 1.3.6.1.4.1.1991.1.1.3.2.7.1.12 | Timeout | RO | ||||||||||||||||||
column · Timeout · read-only · current dot1dStpHelloTime: From RFC1493(Bridge MIB). The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using. | |||||||||||||||||||||
| CsnVLanByPortCfgStpHoldTime | 1.3.6.1.4.1.1991.1.1.3.2.7.1.13 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current dot1dStpHoldTime: From RFC1493(Bridge MIB). This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second. | |||||||||||||||||||||
| CsnVLanByPortCfgStpForwardDelay | 1.3.6.1.4.1.1991.1.1.3.2.7.1.14 | Timeout | RO | ||||||||||||||||||
column · Timeout · read-only · current dot1dStpForwardDelay: From RFC1493(Bridge MIB). This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.] | |||||||||||||||||||||
| CsnVLanByPortCfgStpTimeSinceTopologyChange | 1.3.6.1.4.1.1991.1.1.3.2.7.1.15 | TimeTicks | RO | ||||||||||||||||||
column · TimeTicks · read-only · current The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. | |||||||||||||||||||||
| CsnVLanByPortCfgStpTopChanges | 1.3.6.1.4.1.1991.1.1.3.2.7.1.16 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The total number of topology changes detected by this bridge since the management entity was last reset or initialized. | |||||||||||||||||||||
| CsnVLanByPortCfgStpRootCost | 1.3.6.1.4.1.1991.1.1.3.2.7.1.17 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current dot1dStpRootCost: From RFC1493(Bridge MIB). The cost of the path to the root as seen from this bridge. | |||||||||||||||||||||
| CsnVLanByPortCfgStpRootPort | 1.3.6.1.4.1.1991.1.1.3.2.7.1.18 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current dot1dStpRootPort: From RFC1493(Bridge MIB). The port number of the port which offers the lowest cost path from this bridge to the root bridge. | |||||||||||||||||||||
| CsnVLanByPortCfgStpDesignatedRoot | 1.3.6.1.4.1.1991.1.1.3.2.7.1.19 | BridgeId | RO | ||||||||||||||||||
column · BridgeId · read-only · current dot1dStpDesignatedRoot: From RFC1493(Bridge MIB). The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node. | |||||||||||||||||||||
| CsnVLanByPortCfgBaseBridgeAddress | 1.3.6.1.4.1.1991.1.1.3.2.7.1.20 | MacAddress | RO | ||||||||||||||||||
column · MacAddress · read-only · current The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with dot1dStpPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol. | |||||||||||||||||||||
| CsnVLanByPortCfgVLanName | 1.3.6.1.4.1.1991.1.1.3.2.7.1.21 | DisplayString (SIZE (0..32)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-write · current VLAN Community Name string. | |||||||||||||||||||||
| CsnVLanByPortCfgRouterIntf | 1.3.6.1.4.1.1991.1.1.3.2.7.1.22 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured. | |||||||||||||||||||||
| CsnVLanByPortCfgRowStatus | 1.3.6.1.4.1.1991.1.1.3.2.7.1.23 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Use object to delete a vlan entry.
| |||||||||||||||||||||
| CsnVLanByPortCfgStpVersion | 1.3.6.1.4.1.1991.1.1.3.2.7.1.24 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The version of Spanning Tree Protocol the bridge is currently running. The value 'stpCompatible(0)' indicates the Spanning Tree Protocol specified in IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning Tree Protocol specified in IEEE 802.1w. New value may be defined as future versions of the protocol become available.
| |||||||||||||||||||||
| CsnVLanByPortCfgInOctets | 1.3.6.1.4.1.1991.1.1.3.2.7.1.25 | Counter64 | RO | deprecated | |||||||||||||||||
column · Counter64 · read-only · deprecated The number of bytes received on this VLAN. This can be used as the per VE couter, if there is one-to-one map for VLAN-VE. | |||||||||||||||||||||
| CsnVLanByPortCfgMcastMode | 1.3.6.1.4.1.1991.1.1.3.2.7.1.26 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Multicast (IGMP snooping) mode on the VLAN can be set either active or passive or disabled and the default is disabled. disabled(0)..... IP Multicast is disabled on this VLAN active(1)........this VLAN generates IGMP queries passive(2).......this VLAN listens for IGMP packets
| |||||||||||||||||||||
| CsnVLanByPortCfgMcastVersion | 1.3.6.1.4.1.1991.1.1.3.2.7.1.27 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Multicast version at this VLAN can be set 2 or 3, and the default is 2. The initial value is 0 | |||||||||||||||||||||
| NsnSwPortInfo | 1.3.6.1.4.1.1991.1.1.3.3 | ||||||||||||||||||||
| TsnSwPortInfoTable | 1.3.6.1.4.1.1991.1.1.3.3.1 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated A specific snSwPortInfo group consists of a number of switch ports. | |||||||||||||||||||||
| RsnSwPortInfoEntry | 1.3.6.1.4.1.1991.1.1.3.3.1.1 | NA | deprecated | ||||||||||||||||||
row · not-accessible · deprecated An entry in the snSwPortInfo table indicates the configuration on a specified port. A SNMP SET PDU for a row of the snSwPortInfoTable requires the entired sequence of the MIB Objects in each snSwPortInfoEntry stored in one PDU. Otherwise, GENERR return-value will be returned.
| |||||||||||||||||||||
| CsnSwPortInfoPortNum | 1.3.6.1.4.1.1991.1.1.3.3.1.1.1 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated The port index. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only). | |||||||||||||||||||||
| CsnSwPortInfoMonitorMode | 1.3.6.1.4.1.1991.1.1.3.3.1.1.2 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated DEPRECATED by snSwPortInfoMirrorMode and snPortMonitorTable.
| |||||||||||||||||||||
| CsnSwPortInfoTagMode | 1.3.6.1.4.1.1991.1.1.3.3.1.1.3 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated For tagged port, we could have multiple VLANs per port. For untagged port or auto port, there is only one VLAN ID per port.
| |||||||||||||||||||||
| CsnSwPortInfoChnMode | 1.3.6.1.4.1.1991.1.1.3.3.1.1.4 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated The port can be configured to operate in either half or full duplex mode. The values are: halfDuplex(1)...half duplex mode fullDuplex(2)...full duplex mode The read-back channel status from hardware are: none(0).........link down or port disabled. halfDuplex(1)...half duplex mode fullDuplex(2)...full duplex mode The port media type (expansion or regular) and port link type (trunk or feeder) determine value of this object. The port can not set to half duplex mode if the port connect mode is m200e(4). However, the value of this parameter may be automatically set whenever the expansion port is connected (e.g. cascade connecting device).
| |||||||||||||||||||||
| CsnSwPortInfoSpeed | 1.3.6.1.4.1.1991.1.1.3.3.1.1.5 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated The speed configuration for a port. The values are: none(0)..........link down or no traffic. sAutoSense(1)....Auto-sensing 10 or 100Mbits. s10M(2)..........10Mbits per second. s100M(3).........100Mbits per second. s1G(4)...........1Gbits per second. s1GM(5)..........1Gbits per second master. s155M(6).........155Mbits per second (ATM) (for expansion board only). s10G(7)..........10Gbits per second. s622M(8).........OC12 - 622Mbits per second s2488M(9)........OC48 - 2.488Gbits per second s9953M(10).......OC192 - 9.953Gbits per second s16G(11)..........16Gbits per second. s40G(13)..........40Gbits per second. s2500M(14)..........2.5Gbits per second. s5000M(15)..........5Gbits per second. s100G(16)...........100Gbits per second. s25G(17)...........25Gbits per second. The read-back hardware status are the following: none(0)..........link down or no traffic. s10M(2)..........10Mbits per second. s100M(3).........100Mbits per second. s1G(4)...........1Gbits per second. s1GM(5)..........1Gbits per second master. s155M(6).........155Mbits per second (ATM) (for expansion board only). s10G(7)..........10Gbits per second. s622M(8).........OC12 - 622Mbits per second s2488M(9)........OC48 - 2.488Gbits per second s9953M(10).......OC192 - 9.953Gbits per second s16G(11)..........16Gbits per second. s40G(13)..........40Gbits per second. s2500M(14)..........2.5Gbits per second. s5000M(15)..........5Gbits per second. s100G(16)...........100Gbits per second. s25G(17)...........25Gbits per second. The port media type (expansion or regular) and port link type (trunk or feeder) determine whether this object can be written and the valid values. It is not allowed to change speed for trunks ports. For expansion ports, all of the above speed can be set. However, the value of this parameter may be automatically set whenever the expansion port is connected (e.g. cascade connecting device).
| |||||||||||||||||||||
| CsnSwPortInfoMediaType | 1.3.6.1.4.1.1991.1.1.3.3.1.1.6 | INTEGER | RO | deprecated | |||||||||||||||||
column · INTEGER · read-only · deprecated The media type for the port. The values are: other(1).........other or unknown media. m100BaseTX(2)....100Mbits per second copper. m100BaseFX(3)....100Mbits per second fiber. m1000BaseFX(4)...1Gbits per second fiber. mT3(5)...........45Mbits per second (T3). m155ATM(6).......155Mbits per second (ATM). m1000BaseTX(7)...1Gbits per second copper. m622ATM(8).......622Mbits per second (ATM). m155POS(9).......155Mbits per second (POS). m622POS(10)......622Mbits per second (POS). m2488POS(11).....2488Mbits per second (POS). m10000BaseFX(12).10Gbits per second fiber. m9953POS(13).....9953Mbits per second (POS). m16GStacking(14).16Gbits per second fiber. m40GStacking(16). 40Gbits (stacking) per second fiber. m2500BaseTX(19) 2.5Gbits per second fiber. m100GBaseTX(20)...100Gbits per second fiber. mMultiGigBZ(21)......2.5G/5G/10G multiGig per second copper, m40GBaseTX(22)...40Gbits per second fiber. m25GBaseTX(23)...25Gbits per second fiber.
| |||||||||||||||||||||
| CsnSwPortInfoConnectorType | 1.3.6.1.4.1.1991.1.1.3.3.1.1.7 | INTEGER | RO | deprecated | |||||||||||||||||
column · INTEGER · read-only · deprecated The type of connector that the port offers. The values are: other(1)...........other or unknown connector copper(2)..........Copper connector fiber(3)...........Fiber connector This describes the physical connector type
| |||||||||||||||||||||
| CsnSwPortInfoAdminStatus | 1.3.6.1.4.1.1991.1.1.3.3.1.1.8 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated The desired state of all ports. The testing(3) state indicates that no operational packets can be passed. (same as ifAdminStatus in MIB-II)
| |||||||||||||||||||||
| CsnSwPortInfoLinkStatus | 1.3.6.1.4.1.1991.1.1.3.3.1.1.9 | INTEGER | RO | deprecated | |||||||||||||||||
column · INTEGER · read-only · deprecated The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. (same as ifOperStatus in MIB-II)
| |||||||||||||||||||||
| CsnSwPortInfoPortQos | 1.3.6.1.4.1.1991.1.1.3.3.1.1.10 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated The Stand alone stackable switch Port Qos Priority values are: low(0) -- low prority high(1) -- high prority. The BigIron Port Qos Priority values are: level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)
| |||||||||||||||||||||
| CsnSwPortInfoPhysAddress | 1.3.6.1.4.1.1991.1.1.3.3.1.1.11 | PhysAddress | RO | deprecated | |||||||||||||||||
column · PhysAddress · read-only · deprecated The port physical address. The physical address represents the switch port. | |||||||||||||||||||||
| CsnSwPortStatsInFrames | 1.3.6.1.4.1.1991.1.1.3.3.1.1.12 | Counter32 | RO | deprecated | |||||||||||||||||
column · Counter32 · read-only · deprecated The total number of packets received on the interface. | |||||||||||||||||||||
| CsnSwPortStatsOutFrames | 1.3.6.1.4.1.1991.1.1.3.3.1.1.13 | Counter32 | RO | deprecated | |||||||||||||||||
column · Counter32 · read-only · deprecated The total number of packets transmitted out of the interface. | |||||||||||||||||||||
| CsnSwPortStatsAlignErrors | 1.3.6.1.4.1.1991.1.1.3.3.1.1.14 | Counter32 | RO | deprecated | |||||||||||||||||
column · Counter32 · read-only · deprecated dot3StatsAlignmentErrors : A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. | |||||||||||||||||||||
| CsnSwPortStatsFCSErrors | 1.3.6.1.4.1.1991.1.1.3.3.1.1.15 | Counter32 | RO | deprecated | |||||||||||||||||
column · Counter32 · read-only · deprecated dot3StatsFCSErrors : A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. | |||||||||||||||||||||
| CsnSwPortStatsMultiColliFrames | 1.3.6.1.4.1.1991.1.1.3.3.1.1.16 | Counter32 | RO | deprecated | |||||||||||||||||
column · Counter32 · read-only · deprecated dot3StatsMultipleCollisionFrames : A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsSingleCollisionFrames object. | |||||||||||||||||||||
| CsnSwPortStatsFrameTooLongs | 1.3.6.1.4.1.1991.1.1.3.3.1.1.17 | Counter32 | RO | deprecated | |||||||||||||||||
column · Counter32 · read-only · deprecated dot3StatsFrameTooLongs : A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incremented when the frameTooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. | |||||||||||||||||||||
| CsnSwPortStatsTxColliFrames | 1.3.6.1.4.1.1991.1.1.3.3.1.1.18 | Counter32 | RO | deprecated | |||||||||||||||||
column · Counter32 · read-only · deprecated A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by a combination of both dot3StatsSingleCollisionFrames and dot3StatsMultipleCollisionFrames objects. | |||||||||||||||||||||
| CsnSwPortStatsRxColliFrames | 1.3.6.1.4.1.1991.1.1.3.3.1.1.19 | Counter32 | RO | deprecated | |||||||||||||||||
column · Counter32 · read-only · deprecated A count of successfully received frames on a particular interface for which transmission is inhibited by more than one collision. This object is not specified in dot3 but it has the same functionarity as snSwPortStatsTxColliFrames. | |||||||||||||||||||||
| CsnSwPortStatsFrameTooShorts | 1.3.6.1.4.1.1991.1.1.3.3.1.1.20 | Counter32 | RO | deprecated | |||||||||||||||||
column · Counter32 · read-only · deprecated A count of frames received on a particular interface that below the minimum permitted frame size. | |||||||||||||||||||||
| CsnSwPortLockAddressCount | 1.3.6.1.4.1.1991.1.1.3.3.1.1.21 | INTEGER (0..2048) | RW | deprecated | |||||||||||||||||
column · INTEGER (0..2048) · read-write · deprecated The number of source MAC addresses are allowed for a port. Writing 0 to this object will allow any number of addresses. | |||||||||||||||||||||
| CsnSwPortStpPortEnable | 1.3.6.1.4.1.1991.1.1.3.3.1.1.22 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated The enabled/disabled status of the port.
| |||||||||||||||||||||
| CsnSwPortDhcpGateListId | 1.3.6.1.4.1.1991.1.1.3.3.1.1.23 | INTEGER (0..32) | RW | deprecated | |||||||||||||||||
column · INTEGER (0..32) · read-write · deprecated The ID for a DHCP gateway list entry relative to this switch port. 0 = unset or no assigned ID | |||||||||||||||||||||
| CsnSwPortName | 1.3.6.1.4.1.1991.1.1.3.3.1.1.24 | DisplayString (SIZE (0..255)) | RW | deprecated | |||||||||||||||||
column · DisplayString (SIZE (0..255)) · read-write · deprecated Port Name string. | |||||||||||||||||||||
| CsnSwPortStatsInBcastFrames | 1.3.6.1.4.1.1991.1.1.3.3.1.1.25 | Counter32 | RO | deprecated | |||||||||||||||||
column · Counter32 · read-only · deprecated The total number of broadcast packets received on the interface. | |||||||||||||||||||||
| CsnSwPortStatsOutBcastFrames | 1.3.6.1.4.1.1991.1.1.3.3.1.1.26 | Counter32 | RO | deprecated | |||||||||||||||||
column · Counter32 · read-only · deprecated The total number of broadcast packets transmitted out of the interface. | |||||||||||||||||||||
| CsnSwPortStatsInMcastFrames | 1.3.6.1.4.1.1991.1.1.3.3.1.1.27 | Counter32 | RO | deprecated | |||||||||||||||||
column · Counter32 · read-only · deprecated The total number of multicast packets received on the interface. | |||||||||||||||||||||
| CsnSwPortStatsOutMcastFrames | 1.3.6.1.4.1.1991.1.1.3.3.1.1.28 | Counter32 | RO | deprecated | |||||||||||||||||
column · Counter32 · read-only · deprecated The total number of multicast packets transmitted out of the interface. | |||||||||||||||||||||
| CsnSwPortStatsInDiscard | 1.3.6.1.4.1.1991.1.1.3.3.1.1.29 | Counter32 | RO | deprecated | |||||||||||||||||
column · Counter32 · read-only · deprecated The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. | |||||||||||||||||||||
| CsnSwPortStatsOutDiscard | 1.3.6.1.4.1.1991.1.1.3.3.1.1.30 | Counter32 | RO | deprecated | |||||||||||||||||
column · Counter32 · read-only · deprecated The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. | |||||||||||||||||||||
| CsnSwPortStatsMacStations | 1.3.6.1.4.1.1991.1.1.3.3.1.1.31 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated The total number of MAC Stations connected to the interface. | |||||||||||||||||||||
| CsnSwPortCacheGroupId | 1.3.6.1.4.1.1991.1.1.3.3.1.1.32 | Integer32 | RW | deprecated | |||||||||||||||||
column · Integer32 · read-write · deprecated Cache Group ID for the interface. | |||||||||||||||||||||
| CsnSwPortTransGroupId | 1.3.6.1.4.1.1991.1.1.3.3.1.1.33 | Integer32 | RW | deprecated | |||||||||||||||||
column · Integer32 · read-write · deprecated Transparent Group ID for the interface. | |||||||||||||||||||||
| CsnSwPortInfoAutoNegotiate | 1.3.6.1.4.1.1991.1.1.3.3.1.1.34 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated This feature only applies to Gigabit Ethernet ports. If set to disable(0), port will be put to non-negotiation mode. If set to enable(1), port will start auto-negotiation indefinitely until succeed. If set to negFullAuto(2), the port will start with auto- negotiation, if the negotiation failed, then it will automatically switch to non-negotiation mode. Stackable products (except TurboIron 8) Gigabit Ethernet ports do not support negFullAuto(2). If set to global(3), port negotiation mode follows the value of snSwGlobalAutoNegotiate. Non-Gigabit Ethernet port returns the value other(4).
| |||||||||||||||||||||
| CsnSwPortInfoFlowControl | 1.3.6.1.4.1.1991.1.1.3.3.1.1.35 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Enable/Disbale port flow control.
| |||||||||||||||||||||
| CsnSwPortInfoGigType | 1.3.6.1.4.1.1991.1.1.3.3.1.1.36 | INTEGER | RO | deprecated | |||||||||||||||||
column · INTEGER · read-only · deprecated The media type for the port. The values are: m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver. m1000BaseLX(1)....1Gbits per second fiber, with a long wavelength transceiver (3km). m1000BaseLH(2)....1Gbits per second fiber, with a special wavelength transceiver (50km). m1000BaseLHA(3)....1Gbits per second fiber, with a special wavelength transceiver (70km). m1000BaseLHB(4)....1Gbits per second fiber, with a special wavelength transceiver (150km). m1000BaseTX(5)....1Gbits per second copper (100meter). m10000BaseSR(6)....10Gbits per second fiber, with a short range wavelength transceiver (100m). m10000BaseLR(7)....10Gbits per second fiber, with a long range wavelength transceiver (10km). m10000BaseER(8)....10Gbits per second fiber, with a extended range wavelength transceiver (40km). sfpCWDM1470nm80Km(9)....1Gbits per second CWDM fiber, with a wavelength 1470nm, reach 80 kms. sfpCWDM1490nm80Km(10)....1Gbits per second CWDM fiber, with a wavelength 1490nm, reach 80 kms. sfpCWDM1510nm80Km(11)....1Gbits per second CWDM fiber, with a wavelength 1510nm, reach 80 kms. sfpCWDM1530nm80Km(12)....1Gbits per second CWDM fiber, with a wavelength 1530nm, reach 80 kms. sfpCWDM1550nm80Km(13)....1Gbits per second CWDM fiber, with a wavelength 1550nm, reach 80 kms. sfpCWDM1570nm80Km(14)....1Gbits per second CWDM fiber, with a wavelength 1570nm, reach 80 kms. sfpCWDM1590nm80Km(15)....1Gbits per second CWDM fiber, with a wavelength 1590nm, reach 80 kms. sfpCWDM1610nm80Km(16)....1Gbits per second CWDM fiber, with a wavelength 1610nm, reach 80 kms. sfpCWDM1470nm100Km(17)....1Gbits per second CWDM fiber, with a wavelength 1470nm, reach 100 kms. sfpCWDM1490nm100Km(18)....1Gbits per second CWDM fiber, with a wavelength 1490nm, reach 100 kms. sfpCWDM1510nm100Km(19)....1Gbits per second CWDM fiber, with a wavelength 1510nm, reach 100 kms. sfpCWDM1530nm100Km(20)....1Gbits per second CWDM fiber, with a wavelength 1530nm, reach 100 kms. sfpCWDM1550nm100Km(21)....1Gbits per second CWDM fiber, with a wavelength 1550nm, reach 100 kms. sfpCWDM1570nm100Km(22)....1Gbits per second CWDM fiber, with a wavelength 1570nm, reach 100 kms. sfpCWDM1590nm100Km(23)....1Gbits per second CWDM fiber, with a wavelength 1590nm, reach 100 kms. sfpCWDM1610nm100Km(24)....1Gbits per second CWDM fiber, with a wavelength 1610nm, reach 100 kms. m1000BaseLHX(25)...1Gbits per second fiber, with a special wavelength transceiver (150km). m2500BaseTX(50)...2.5GBASE fiber. m100GBaseTX(51) ..100G base fiber mMultiGigBZ(52) .. 2.5G/5G/10G multiGig copper m40GBaseTX(53) .. 40G base fiber m25GBaseFX(54) .. 25G base fiber notApplicable(255)....a non-gigabit port.
| |||||||||||||||||||||
| CsnSwPortStatsLinkChange | 1.3.6.1.4.1.1991.1.1.3.3.1.1.37 | Counter32 | RO | deprecated | |||||||||||||||||
column · Counter32 · read-only · deprecated The total number of link state change of the interface. | |||||||||||||||||||||
| CsnSwPortIfIndex | 1.3.6.1.4.1.1991.1.1.3.3.1.1.38 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 1213 and RFC 1573. | |||||||||||||||||||||
| CsnSwPortDescr | 1.3.6.1.4.1.1991.1.1.3.3.1.1.39 | DisplayString | RO | deprecated | |||||||||||||||||
column · DisplayString · read-only · deprecated A textual string containing the slot/port information about the interface. | |||||||||||||||||||||
| CsnSwPortInOctets | 1.3.6.1.4.1.1991.1.1.3.3.1.1.40 | OCTET STRING (SIZE (8)) | RO | deprecated | |||||||||||||||||
column · OCTET STRING (SIZE (8)) · read-only · deprecated The total number of octets received on the interface, including framing characters. This object is a 64-bit counter of the ifInOctets object, defined in RFC 1213. The octet string is in big-endian byte order. | |||||||||||||||||||||
| CsnSwPortOutOctets | 1.3.6.1.4.1.1991.1.1.3.3.1.1.41 | OCTET STRING (SIZE (8)) | RO | deprecated | |||||||||||||||||
column · OCTET STRING (SIZE (8)) · read-only · deprecated The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit counter of the ifOutOctets object, defined in RFC 1213. The octet string is in big-endian byte order. | |||||||||||||||||||||
| CsnSwPortStatsInBitsPerSec | 1.3.6.1.4.1.1991.1.1.3.3.1.1.42 | Gauge32 | RO | deprecated | |||||||||||||||||
column · Gauge32 · read-only · deprecated The number of bits per second received on the interface over a 5 minutes interval. | |||||||||||||||||||||
| CsnSwPortStatsOutBitsPerSec | 1.3.6.1.4.1.1991.1.1.3.3.1.1.43 | Gauge32 | RO | deprecated | |||||||||||||||||
column · Gauge32 · read-only · deprecated The number of bits per second transmitted out of the interface over a 5 minutes interval. | |||||||||||||||||||||
| CsnSwPortStatsInPktsPerSec | 1.3.6.1.4.1.1991.1.1.3.3.1.1.44 | Gauge32 | RO | deprecated | |||||||||||||||||
column · Gauge32 · read-only · deprecated The number of packets per second received on the interface over a 5 minutes interval. | |||||||||||||||||||||
| CsnSwPortStatsOutPktsPerSec | 1.3.6.1.4.1.1991.1.1.3.3.1.1.45 | Gauge32 | RO | deprecated | |||||||||||||||||
column · Gauge32 · read-only · deprecated The number of packets per second transmitted out of the interface over a 5 minutes interval. | |||||||||||||||||||||
| CsnSwPortStatsInUtilization | 1.3.6.1.4.1.1991.1.1.3.3.1.1.46 | INTEGER (0..10000) | RO | deprecated | |||||||||||||||||
column · INTEGER (0..10000) · read-only · deprecated The input network utilization in hundredths of a percent over a 5 minutes interval. | |||||||||||||||||||||
| CsnSwPortStatsOutUtilization | 1.3.6.1.4.1.1991.1.1.3.3.1.1.47 | INTEGER (0..10000) | RO | deprecated | |||||||||||||||||
column · INTEGER (0..10000) · read-only · deprecated The output network utilization in hundredths of a percent over a 5 minutes interval. | |||||||||||||||||||||
| CsnSwPortFastSpanPortEnable | 1.3.6.1.4.1.1991.1.1.3.3.1.1.48 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated The enabled/disabled fast span port status of the port.
| |||||||||||||||||||||
| CsnSwPortFastSpanUplinkEnable | 1.3.6.1.4.1.1991.1.1.3.3.1.1.49 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated The enabled/disabled fast span uplink status of the port.
| |||||||||||||||||||||
| CsnSwPortVlanId | 1.3.6.1.4.1.1991.1.1.3.3.1.1.50 | INTEGER (0..4095) | RW | deprecated | |||||||||||||||||
column · INTEGER (0..4095) · read-write · deprecated The ID of a VLAN of which this port is a member. Port must be untagged. For tagged port which belongs to multiple VLANs, this object return 0 which is an invalid VLAN ID value. | |||||||||||||||||||||
| CsnSwPortRouteOnly | 1.3.6.1.4.1.1991.1.1.3.3.1.1.51 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Enable/Disable L2 switching of a routing switch port. By default, the routing switch performs routing first. If routing failed, it performs switching. Enable route only instrcuts the routing switch to perform routing only. For a L2 switching only product, reading this object always return 'disabled', writing 'enabled' to this object takes no effect.
| |||||||||||||||||||||
| CsnSwPortPresent | 1.3.6.1.4.1.1991.1.1.3.3.1.1.52 | INTEGER | RO | deprecated | |||||||||||||||||
column · INTEGER · read-only · deprecated Indicate if the port is absent or present. This object only valid for M4 module
| |||||||||||||||||||||
| CsnSwPortGBICStatus | 1.3.6.1.4.1.1991.1.1.3.3.1.1.53 | INTEGER | RO | deprecated | |||||||||||||||||
column · INTEGER · read-only · deprecated Indicate if the gig port has GBICs on them. If set to GBIC(1), it means that the port is GBIC. If set to miniGBIC(2), it means that the port miniGBIC. If set to empty(3), it means that the GBIC is missing. Value other(4) means that the port not a removable gig port.
| |||||||||||||||||||||
| CsnSwPortStatsInKiloBitsPerSec | 1.3.6.1.4.1.1991.1.1.3.3.1.1.54 | Unsigned32 | RO | deprecated | |||||||||||||||||
column · Unsigned32 · read-only · deprecated Bit rate in kilobits per second received on the 10G and faster interface over a 5 minutes interval. | |||||||||||||||||||||
| CsnSwPortStatsOutKiloBitsPerSec | 1.3.6.1.4.1.1991.1.1.3.3.1.1.55 | Unsigned32 | RO | deprecated | |||||||||||||||||
column · Unsigned32 · read-only · deprecated Bit rate in kilobits per second transmitted out of the 10G and faster interface over a 5 minutes interval. | |||||||||||||||||||||
| CsnSwPortLoadInterval | 1.3.6.1.4.1.1991.1.1.3.3.1.1.56 | INTEGER (30..300) | RW | deprecated | |||||||||||||||||
column · INTEGER (30..300) · read-write · deprecated The time in seconds for which average port utilization should be carried out. The value should be incremental of 30 seconds, between the ranges specified. | |||||||||||||||||||||
| CsnSwPortTagType | 1.3.6.1.4.1.1991.1.1.3.3.1.1.57 | Integer32 | RW | deprecated | |||||||||||||||||
column · Integer32 · read-write · deprecated The IEEE802.1q tag type embedded in the length/type field of an Ethernet packet. It specifies that the 2 octets after the length/type field in an Ethernet packet is the tag value. | |||||||||||||||||||||
| CsnSwPortInLinePowerControl | 1.3.6.1.4.1.1991.1.1.3.3.1.1.58 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Control inline power on/off to a port. If a port does not have inline power capability, reading this object returns 'other(1)'.
| |||||||||||||||||||||
| CsnSwPortInLinePowerWattage | 1.3.6.1.4.1.1991.1.1.3.3.1.1.59 | Integer32 | RW | deprecated | |||||||||||||||||
column · Integer32 · read-write · deprecated Adjust the inline power wattage. Valid value between 1000 and 15400. Each unit is milliwatts. This object can only be set after snSwPortInLinePowerControl has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If a port does not have inline power capability, reading this object returns undefined value. | |||||||||||||||||||||
| CsnSwPortInLinePowerClass | 1.3.6.1.4.1.1991.1.1.3.3.1.1.60 | INTEGER (0..3) | RW | deprecated | |||||||||||||||||
column · INTEGER (0..3) · read-write · deprecated Adjust the inline power class. This object can only be set after snSwPortInLinePowerControl has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If a port does not have inline power capability, reading this object returns undefined value. | |||||||||||||||||||||
| CsnSwPortInLinePowerPriority | 1.3.6.1.4.1.1991.1.1.3.3.1.1.61 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Inline power allocation priority for the power device 0- Not a POE port, 1- Critical, 2- High, 3- Low, 4- Medium, 5- other.
| |||||||||||||||||||||
| CsnSwPortInfoMirrorMode | 1.3.6.1.4.1.1991.1.1.3.3.1.1.62 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Enable/disable mirror on this port.
| |||||||||||||||||||||
| CsnSwPortStatsInJumboFrames | 1.3.6.1.4.1.1991.1.1.3.3.1.1.63 | Counter64 | RO | deprecated | |||||||||||||||||
column · Counter64 · read-only · deprecated The total number of jumbo packets received on the interface. | |||||||||||||||||||||
| CsnSwPortStatsOutJumboFrames | 1.3.6.1.4.1.1991.1.1.3.3.1.1.64 | Counter64 | RO | deprecated | |||||||||||||||||
column · Counter64 · read-only · deprecated The total number of jumbo packets transmitted out of the interface. | |||||||||||||||||||||
| CsnSwPortInLinePowerConsumed | 1.3.6.1.4.1.1991.1.1.3.3.1.1.66 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated Inline power consumed by the port. Each unit is milliwatts. | |||||||||||||||||||||
| CsnSwPortInLinePowerPDType | 1.3.6.1.4.1.1991.1.1.3.3.1.1.67 | DisplayString | RO | deprecated | |||||||||||||||||
column · DisplayString · read-only · deprecated Inline Power device type 802.3af or Legacy device. | |||||||||||||||||||||
| NsnInterfaceId | 1.3.6.1.4.1.1991.1.1.3.3.2 | ||||||||||||||||||||
| NsnEthernetInterface | 1.3.6.1.4.1.1991.1.1.3.3.2.1 | ||||||||||||||||||||
| NsnPosInterface | 1.3.6.1.4.1.1991.1.1.3.3.2.2 | ||||||||||||||||||||
| NsnAtmInterface | 1.3.6.1.4.1.1991.1.1.3.3.2.3 | ||||||||||||||||||||
| NsnVirtualInterface | 1.3.6.1.4.1.1991.1.1.3.3.2.4 | ||||||||||||||||||||
| NsnLoopbackInterface | 1.3.6.1.4.1.1991.1.1.3.3.2.5 | ||||||||||||||||||||
| NsnGreTunnelInterface | 1.3.6.1.4.1.1991.1.1.3.3.2.6 | ||||||||||||||||||||
| NsnSubInterface | 1.3.6.1.4.1.1991.1.1.3.3.2.7 | ||||||||||||||||||||
| NsnMplsTunnelInterface | 1.3.6.1.4.1.1991.1.1.3.3.2.8 | ||||||||||||||||||||
| NsnPvcInterface | 1.3.6.1.4.1.1991.1.1.3.3.2.9 | ||||||||||||||||||||
| NsnMgmtEthernetInterface | 1.3.6.1.4.1.1991.1.1.3.3.2.10 | ||||||||||||||||||||
| NsnTrunkInterface | 1.3.6.1.4.1.1991.1.1.3.3.2.11 | ||||||||||||||||||||
| NsnVirtualMgmtInterface | 1.3.6.1.4.1.1991.1.1.3.3.2.12 | ||||||||||||||||||||
| Nsn6to4TunnelInterface | 1.3.6.1.4.1.1991.1.1.3.3.2.13 | ||||||||||||||||||||
| TsnInterfaceLookupTable | 1.3.6.1.4.1.1991.1.1.3.3.3 | NA | |||||||||||||||||||
| RsnInterfaceLookupEntry | 1.3.6.1.4.1.1991.1.1.3.3.3.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CsnInterfaceLookupInterfaceId | 1.3.6.1.4.1.1991.1.1.3.3.3.1.1 | InterfaceId | RO | ||||||||||||||||||
| CsnInterfaceLookupIfIndex | 1.3.6.1.4.1.1991.1.1.3.3.3.1.2 | Integer32 | RO | ||||||||||||||||||
| TsnIfIndexLookupTable | 1.3.6.1.4.1.1991.1.1.3.3.4 | NA | |||||||||||||||||||
| RsnIfIndexLookupEntry | 1.3.6.1.4.1.1991.1.1.3.3.4.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CsnIfIndexLookupIfIndex | 1.3.6.1.4.1.1991.1.1.3.3.4.1.1 | Integer32 | RO | ||||||||||||||||||
| CsnIfIndexLookupInterfaceId | 1.3.6.1.4.1.1991.1.1.3.3.4.1.2 | InterfaceId | RO | ||||||||||||||||||
| TsnSwIfInfoTable | 1.3.6.1.4.1.1991.1.1.3.3.5 | NA | |||||||||||||||||||
table · not-accessible · current A specific snSwIfInfo group consists of a number of switch ports. | |||||||||||||||||||||
| RsnSwIfInfoEntry | 1.3.6.1.4.1.1991.1.1.3.3.5.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the snSwIfInfo table indicates the configuration on a specified port. A SNMP SET PDU for a row of the snSwIfInfoTable requires the entire sequence of the MIB Objects in each snSwIfInfoEntry stored in one PDU. Otherwise, GENERR return-value will be returned.
| |||||||||||||||||||||
| CsnSwIfInfoPortNum | 1.3.6.1.4.1.1991.1.1.3.3.5.1.1 | InterfaceIndex | RO | ||||||||||||||||||
column · InterfaceIndex · read-only · current The port/interface index (ifindex). | |||||||||||||||||||||
| CsnSwIfInfoMonitorMode | 1.3.6.1.4.1.1991.1.1.3.3.5.1.2 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated DEPRECATED by snSwIf2MirrorMode and snPortMonitorTable.
| |||||||||||||||||||||
| CsnSwIfInfoMirrorPorts | 1.3.6.1.4.1.1991.1.1.3.3.5.1.3 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current The list of port/interface index (ifindex), which mirror this interface, when monitoring is enabled. | |||||||||||||||||||||
| CsnSwIfInfoTagMode | 1.3.6.1.4.1.1991.1.1.3.3.5.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configure an interface as tagged member of non-default VLAN,
untagged VLAN membership of the interface will not be modified,
be it is default-VLAN or non-default VLAN. Configure an interface
as untagged member of non-default VLAN, that interface will be
moved from default VLAN to the configured VLAN. Dual(3) mode
no longer be needed, this option will be will be deprecated.
All tagged interfaces are implicit dual-mode ports.
| |||||||||||||||||||||
| CsnSwIfInfoTagType | 1.3.6.1.4.1.1991.1.1.3.3.5.1.5 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The IEEE802.1q tag type embedded in the length/type field of an Ethernet packet. It specifies that the 2 octets after the length/type field in an Ethernet packet is the tag value. | |||||||||||||||||||||
| CsnSwIfInfoChnMode | 1.3.6.1.4.1.1991.1.1.3.3.5.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The port can be configured to operate in either half or full duplex mode. The values are: halfDuplex(1)...half duplex mode fullDuplex(2)...full duplex mode The read-back channel status from hardware are: none(0).........link down or port disabled. halfDuplex(1)...half duplex mode fullDuplex(2)...full duplex mode The port media type (expansion or regular) and port link type (trunk or feeder) determine value of this object. The port can not set to half duplex mode if the port connect mode is m200e(4). However, the value of this parameter may be automatically set whenever the expansion port is connected (e.g. cascade connecting device).
| |||||||||||||||||||||
| CsnSwIfInfoSpeed | 1.3.6.1.4.1.1991.1.1.3.3.5.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The speed configuration for a port. The values are:
none(0)..........link down or no traffic.
sAutoSense(1)....Auto-sensing 10 or 100Mbits.
s10M(2)..........10Mbits per second.
s100M(3).........100Mbits per second.
s1G(4)...........1Gbits per second.
s1GM(5)..........1Gbits per second master.
s155M(6).........155Mbits per second (ATM) (for expansion board only).
s10G(7)..........10Gbits per second.
s622M(8).........OC12 - 622Mbits per second
s2488M(9)........OC48 - 2.488Gbits per second
s9953M(10).......OC192 - 9.953Gbits per second
s16G(11)..........16Gbits per second.
sOpticBased(12).....Optic-based
s40G(13)..........40Gbits per second.
s2500M(14)..........2.5Gbits per second.
s5000M(15)..........5Gbits per second.
s100G(16)...........100Gbits per second.
s25G(17)............25Gbits per second.
The read-back hardware status are the following:
none(0)..........link down or no traffic.
s10M(2)..........10Mbits per second.
s100M(3).........100Mbits per second.
s1G(4)...........1Gbits per second.
s1GM(5)..........1Gbits per second master.
s155M(6).........155Mbits per second (ATM) (for expansion board only).
s10G(7)..........10Gbits per second.
s622M(8).........OC12 - 622Mbits per second
s2488M(9)........OC48 - 2.488Gbits per second
s9953M(10).......OC192 - 9.953Gbits per second
s16G(11)..........16Gbits per second.
s40G(13)..........40Gbits per second.
s2500M(14)..........2.5Gbits per second.
s5000M(15)..........5Gbits per second.
s100G(16)...........100Gbits per second.
s25G(17)............25Gbits per second.
The port media type (expansion or regular)
and port link type (trunk or feeder) determine
whether this object can be written and the valid
values.
It is not allowed to change speed for trunks ports.
For expansion ports, all of the above speed
can be set.
However, the value of this parameter may be
automatically set whenever the expansion port
is connected (e.g. cascade connecting device).
| |||||||||||||||||||||
| CsnSwIfInfoMediaType | 1.3.6.1.4.1.1991.1.1.3.3.5.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The media type for the port. The values are: other(1).........other or unknown media. m100BaseTX(2)....100Mbits per second copper. m100BaseFX(3)....100Mbits per second fiber. m1000BaseFX(4)...1Gbits per second fiber. mT3(5)...........45Mbits per second (T3). m155ATM(6).......155Mbits per second (ATM). m1000BaseTX(7)...1Gbits per second copper. m622ATM(8).......622Mbits per second (ATM). m155POS(9).......155Mbits per second (POS). m622POS(10)......622Mbits per second (POS). m2488POS(11).....2488Mbits per second (POS). m10000BaseFX(12).10Gbits per second fiber. m9953POS(13).....9953Mbits per second (POS). m16GStacking(14)...16Gbits per second fiber. m40GStacking(16). 40Gbits (stacking) per second fiber. m2500BaseTX(19). 2.5Gbits per second fiber. m100GBaseTX(20)...100Gbits per second fiber. mMultiGigBZ(21)......2.5G/5G/10G multiGig per second copper. m40GBaseTX(22)...40 Gbits per second fiber. m25GBaseFX(23)...25 Gbits per second fiber
| |||||||||||||||||||||
| CsnSwIfInfoConnectorType | 1.3.6.1.4.1.1991.1.1.3.3.5.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type of connector that the port offers. The values are: other(1)...........other or unknown connector copper(2)..........Copper connector fiber(3)...........Fiber connector This describes the physical connector type
| |||||||||||||||||||||
| CsnSwIfInfoAdminStatus | 1.3.6.1.4.1.1991.1.1.3.3.5.1.10 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The desired state of all ports. The testing(3) state indicates that no operational packets can be passed. (same as ifAdminStatus in MIB-II)
| |||||||||||||||||||||
| CsnSwIfInfoLinkStatus | 1.3.6.1.4.1.1991.1.1.3.3.5.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. (same as ifOperStatus in MIB-II)
| |||||||||||||||||||||
| CsnSwIfInfoPortQos | 1.3.6.1.4.1.1991.1.1.3.3.5.1.12 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The Stand alone stackable switch Port Qos Priority values are: low(0) -- low prority high(1) -- high prority. The BigIron Port Qos Priority values are: level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)
| |||||||||||||||||||||
| CsnSwIfInfoPhysAddress | 1.3.6.1.4.1.1991.1.1.3.3.5.1.13 | PhysAddress | RO | ||||||||||||||||||
column · PhysAddress · read-only · current The port physical address. The physical address represents the switch port. | |||||||||||||||||||||
| CsnSwIfLockAddressCount | 1.3.6.1.4.1.1991.1.1.3.3.5.1.14 | INTEGER (0..2048) | RW | ||||||||||||||||||
column · INTEGER (0..2048) · read-write · current The number of source MAC addresses are allowed for a port. Writing 0 to this object will allow any number of addresses. | |||||||||||||||||||||
| CsnSwIfStpPortEnable | 1.3.6.1.4.1.1991.1.1.3.3.5.1.15 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The enabled/disabled status of the port.
| |||||||||||||||||||||
| CsnSwIfDhcpGateListId | 1.3.6.1.4.1.1991.1.1.3.3.5.1.16 | INTEGER (0..32) | RW | ||||||||||||||||||
column · INTEGER (0..32) · read-write · current The ID for a DHCP gateway list entry relative to this switch port. 0 = unset or no assigned ID | |||||||||||||||||||||
| CsnSwIfName | 1.3.6.1.4.1.1991.1.1.3.3.5.1.17 | DisplayString (SIZE (0..255)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..255)) · read-write · current Port Name string. | |||||||||||||||||||||
| CsnSwIfDescr | 1.3.6.1.4.1.1991.1.1.3.3.5.1.18 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current A textual string containing the slot/port information about the interface. | |||||||||||||||||||||
| CsnSwIfInfoAutoNegotiate | 1.3.6.1.4.1.1991.1.1.3.3.5.1.19 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This feature only applies to Gigabit Ethernet ports. If set to disable(0), port will be put to non-negotiation mode. If set to enable(1), port will start auto-negotiation indefinitely until succeed. If set to negFullAuto(2), the port will start with auto- negotiation, if the negotiation failed, then it will automatically switch to non-negotiation mode. Stackable products (except TurboIron 8) Gigabit Ethernet ports do not support negFullAuto(2). If set to global(3), port negotiation mode follows the value of snSwGlobalAutoNegotiate. Non-Gigabit Ethernet port returns the value other(4).
| |||||||||||||||||||||
| CsnSwIfInfoFlowControl | 1.3.6.1.4.1.1991.1.1.3.3.5.1.20 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable/Disbale port flow control.
| |||||||||||||||||||||
| CsnSwIfInfoGigType | 1.3.6.1.4.1.1991.1.1.3.3.5.1.21 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The media type for the port. The
values are:
m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver.
m1000BaseLX(1)....1Gbits per second fiber, with a long wavelength transceiver (3km).
m1000BaseLH(2)....1Gbits per second fiber, with a special wavelength transceiver (50km).
m1000BaseLHA(3)....1Gbits per second fiber, with a special wavelength transceiver (70km).
m1000BaseLHB(4)....1Gbits per second fiber, with a special wavelength transceiver (150km).
m1000BaseTX(5)....1Gbits per second copper (100meter).
m10000BaseSR(6)....10Gbits per second fiber, with a short range wavelength transceiver (100m).
m10000BaseLR(7)....10Gbits per second fiber, with a long range wavelength transceiver (10km).
m10000BaseER(8)....10Gbits per second fiber, with a extended range wavelength transceiver (40km).
sfpCWDM1470nm80Km(9)....1Gbits per second CWDM fiber, with a wavelength 1470nm, reach 80 kms.
sfpCWDM1490nm80Km(10)....1Gbits per second CWDM fiber, with a wavelength 1490nm, reach 80 kms.
sfpCWDM1510nm80Km(11)....1Gbits per second CWDM fiber, with a wavelength 1510nm, reach 80 kms.
sfpCWDM1530nm80Km(12)....1Gbits per second CWDM fiber, with a wavelength 1530nm, reach 80 kms.
sfpCWDM1550nm80Km(13)....1Gbits per second CWDM fiber, with a wavelength 1550nm, reach 80 kms.
sfpCWDM1570nm80Km(14)....1Gbits per second CWDM fiber, with a wavelength 1570nm, reach 80 kms.
sfpCWDM1590nm80Km(15)....1Gbits per second CWDM fiber, with a wavelength 1590nm, reach 80 kms.
sfpCWDM1610nm80Km(16)....1Gbits per second CWDM fiber, with a wavelength 1610nm, reach 80 kms.
sfpCWDM1470nm100Km(17)....1Gbits per second CWDM fiber, with a wavelength 1470nm, reach 100 kms.
sfpCWDM1490nm100Km(18)....1Gbits per second CWDM fiber, with a wavelength 1490nm, reach 100 kms.
sfpCWDM1510nm100Km(19)....1Gbits per second CWDM fiber, with a wavelength 1510nm, reach 100 kms.
sfpCWDM1530nm100Km(20)....1Gbits per second CWDM fiber, with a wavelength 1530nm, reach 100 kms.
sfpCWDM1550nm100Km(21)....1Gbits per second CWDM fiber, with a wavelength 1550nm, reach 100 kms.
sfpCWDM1570nm100Km(22)....1Gbits per second CWDM fiber, with a wavelength 1570nm, reach 100 kms.
sfpCWDM1590nm100Km(23)....1Gbits per second CWDM fiber, with a wavelength 1590nm, reach 100 kms.
sfpCWDM1610nm100Km(24)....1Gbits per second CWDM fiber, with a wavelength 1610nm, reach 100 kms.
m1000BaseLHX(25)...1Gbits per second fiber, with a special wavelength transceiver (150km).
m1000BaseLMC(35)...Link Media Copper.
mXFP10000BaseSR(36)...10GBASE fiber, 850nm serial pluggable XFP optic (LC), target range 300m over MMF.
mXFP10000BaseLR(37)...10GBASE fiber, 1310nm serial pluggable XFP optic (LC) for up to 10km over SMF.
mXFP10000BaseER(38)...10GBASE fiber, 1550nm serial pluggable XFP optic (LC) for up to 40km over SMF.
mXFP10000BaseSW(39)...not used.
mXFP10000BaseLW(40)...not used.
mXFP10000BaseEW(41)...not used
mXFP10000BaseCX4(42)...10GBASE-CX4, XFP module,15m, CX4 connector.
mXFP10000BaseZR(43)...1550nm serial pluggable XFP optic (LC) for up to 80km over SMF.
mXFP10000BaseZRD(44)...10GBASE-ZR DWDM, XFP optic, 80km.
mXFP10000BaseSRSW(46)...same as .mXFP10000BaseSR(36)
mXFP10000BaseLRLW(47)...same as .mXFP10000BaseLR(37)
mXFP10000BaseEREW(48)...same as mXFP10000BaseER(38).
m10000BaseT(49))...10GBASE fiber.
m2500BaseTX(50)...2.5GBASE fiber.
m100GBaseTX(51)...100GBASE fiber.
mMultiGigBZ(52)...2.5G/5G/10G multiGig copper.
m40GBaseTX(53)...40GBASE fiber.
m25GBaseFX(54)...25GBASE fiber.
notApplicable(255)....a non-gigabit port.
| |||||||||||||||||||||
| CsnSwIfFastSpanPortEnable | 1.3.6.1.4.1.1991.1.1.3.3.5.1.22 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The enabled/disabled fast span port status of the port.
| |||||||||||||||||||||
| CsnSwIfFastSpanUplinkEnable | 1.3.6.1.4.1.1991.1.1.3.3.5.1.23 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The enabled/disabled fast span uplink status of the port.
| |||||||||||||||||||||
| CsnSwIfVlanId | 1.3.6.1.4.1.1991.1.1.3.3.5.1.24 | INTEGER (0..4095) | RW | deprecated | |||||||||||||||||
column · INTEGER (0..4095) · read-write · deprecated This object return 0 due to no support for this object from FI 08.0.80 release. Write operation not-supported for this object. | |||||||||||||||||||||
| CsnSwIfRouteOnly | 1.3.6.1.4.1.1991.1.1.3.3.5.1.25 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable/Disable L2 switching of a routing switch port. By default, the routing switch performs routing first. If routing failed, it performs switching. Enable route only instrcuts the routing switch to perform routing only. For a L2 switching only product, reading this object always return 'disabled', writing 'enabled' to this object takes no effect.
| |||||||||||||||||||||
| CsnSwIfPresent | 1.3.6.1.4.1.1991.1.1.3.3.5.1.26 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicate if the port is absent or present. This object only valid for M4 module.
| |||||||||||||||||||||
| CsnSwIfGBICStatus | 1.3.6.1.4.1.1991.1.1.3.3.5.1.27 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicate if the gig port has GBICs on them. If set to GBIC(1), it means that the port is GBIC. If set to miniGBIC(2), it means that the port miniGBIC. If set to empty(3), it means that the GBIC is missing. Value other(4) means that the port not a removable gig port.
| |||||||||||||||||||||
| CsnSwIfLoadInterval | 1.3.6.1.4.1.1991.1.1.3.3.5.1.28 | INTEGER (30..300) | RW | ||||||||||||||||||
column · INTEGER (30..300) · read-write · current The time in seconds for which average port utilization should be carried out. The value should be incremental of 30 seconds, between the ranges specified. | |||||||||||||||||||||
| CsnSwIfStatsInFrames | 1.3.6.1.4.1.1991.1.1.3.3.5.1.29 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The total number of packets received on the interface. | |||||||||||||||||||||
| CsnSwIfStatsOutFrames | 1.3.6.1.4.1.1991.1.1.3.3.5.1.30 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The total number of packets transmitted out of the interface. | |||||||||||||||||||||
| CsnSwIfStatsAlignErrors | 1.3.6.1.4.1.1991.1.1.3.3.5.1.31 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current dot3StatsAlignmentErrors : A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. | |||||||||||||||||||||
| CsnSwIfStatsFCSErrors | 1.3.6.1.4.1.1991.1.1.3.3.5.1.32 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current dot3StatsFCSErrors : A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. | |||||||||||||||||||||
| CsnSwIfStatsMultiColliFrames | 1.3.6.1.4.1.1991.1.1.3.3.5.1.33 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current dot3StatsMultipleCollisionFrames : A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsSingleCollisionFrames object. | |||||||||||||||||||||
| CsnSwIfStatsTxColliFrames | 1.3.6.1.4.1.1991.1.1.3.3.5.1.34 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by a combination of both dot3StatsSingleCollisionFrames and dot3StatsMultipleCollisionFrames objects. | |||||||||||||||||||||
| CsnSwIfStatsRxColliFrames | 1.3.6.1.4.1.1991.1.1.3.3.5.1.35 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current A count of successfully received frames on a particular interface for which transmission is inhibited by more than one collision. This object is not specified in dot3 but it has the same functionarity as snSwIfStatsTxColliFrames. | |||||||||||||||||||||
| CsnSwIfStatsFrameTooLongs | 1.3.6.1.4.1.1991.1.1.3.3.5.1.36 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current dot3StatsFrameTooLongs : A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incremented when the frameTooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. | |||||||||||||||||||||
| CsnSwIfStatsFrameTooShorts | 1.3.6.1.4.1.1991.1.1.3.3.5.1.37 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current A count of frames received on a particular interface that below the minimum permitted frame size. | |||||||||||||||||||||
| CsnSwIfStatsInBcastFrames | 1.3.6.1.4.1.1991.1.1.3.3.5.1.38 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The total number of broadcast packets received on the interface. | |||||||||||||||||||||
| CsnSwIfStatsOutBcastFrames | 1.3.6.1.4.1.1991.1.1.3.3.5.1.39 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The total number of broadcast packets transmitted out of the interface. | |||||||||||||||||||||
| CsnSwIfStatsInMcastFrames | 1.3.6.1.4.1.1991.1.1.3.3.5.1.40 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The total number of multicast packets received on the interface. | |||||||||||||||||||||
| CsnSwIfStatsOutMcastFrames | 1.3.6.1.4.1.1991.1.1.3.3.5.1.41 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The total number of multicast packets transmitted out of the interface. | |||||||||||||||||||||
| CsnSwIfStatsInDiscard | 1.3.6.1.4.1.1991.1.1.3.3.5.1.42 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. | |||||||||||||||||||||
| CsnSwIfStatsOutDiscard | 1.3.6.1.4.1.1991.1.1.3.3.5.1.43 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. | |||||||||||||||||||||
| CsnSwIfStatsMacStations | 1.3.6.1.4.1.1991.1.1.3.3.5.1.44 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The total number of MAC Stations connected to the interface. | |||||||||||||||||||||
| CsnSwIfStatsLinkChange | 1.3.6.1.4.1.1991.1.1.3.3.5.1.45 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The total number of link state change of the interface. | |||||||||||||||||||||
| CsnSwIfInOctets | 1.3.6.1.4.1.1991.1.1.3.3.5.1.46 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The total number of octets received on the interface, including framing characters. This object is a 64-bit counter of the ifInOctets object, defined in RFC 1213. The octet string is in big-endian byte order. | |||||||||||||||||||||
| CsnSwIfOutOctets | 1.3.6.1.4.1.1991.1.1.3.3.5.1.47 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit counter of the ifOutOctets object, defined in RFC 1213. The octet string is in big-endian byte order. | |||||||||||||||||||||
| CsnSwIfStatsInBitsPerSec | 1.3.6.1.4.1.1991.1.1.3.3.5.1.48 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current The number of bits per second received on the interface over a 5 minutes interval. | |||||||||||||||||||||
| CsnSwIfStatsOutBitsPerSec | 1.3.6.1.4.1.1991.1.1.3.3.5.1.49 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current The number of bits per second transmitted out of the interface over a 5 minutes interval. | |||||||||||||||||||||
| CsnSwIfStatsInPktsPerSec | 1.3.6.1.4.1.1991.1.1.3.3.5.1.50 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current The number of packets per second received on the interface over a 5 minutes interval. | |||||||||||||||||||||
| CsnSwIfStatsOutPktsPerSec | 1.3.6.1.4.1.1991.1.1.3.3.5.1.51 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current The number of packets per second transmitted out of the interface over a 5 minutes interval. | |||||||||||||||||||||
| CsnSwIfStatsInUtilization | 1.3.6.1.4.1.1991.1.1.3.3.5.1.52 | INTEGER (0..10000) | RO | ||||||||||||||||||
column · INTEGER (0..10000) · read-only · current The input network utilization in hundredths of a percent over a 5 minutes interval. | |||||||||||||||||||||
| CsnSwIfStatsOutUtilization | 1.3.6.1.4.1.1991.1.1.3.3.5.1.53 | INTEGER (0..10000) | RO | ||||||||||||||||||
column · INTEGER (0..10000) · read-only · current The output network utilization in hundredths of a percent over a 5 minutes interval. | |||||||||||||||||||||
| CsnSwIfStatsInKiloBitsPerSec | 1.3.6.1.4.1.1991.1.1.3.3.5.1.54 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Bit rate in kilobits per second received on the 10G and faster interface over a 5 minutes interval. | |||||||||||||||||||||
| CsnSwIfStatsOutKiloBitsPerSec | 1.3.6.1.4.1.1991.1.1.3.3.5.1.55 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Bit rate in kilobits per second transmitted out of the 10G and faster interface over a 5 minutes interval. | |||||||||||||||||||||
| CsnSwIfStatsInJumboFrames | 1.3.6.1.4.1.1991.1.1.3.3.5.1.56 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The total number of jumbo packets received on the interface. | |||||||||||||||||||||
| CsnSwIfStatsOutJumboFrames | 1.3.6.1.4.1.1991.1.1.3.3.5.1.57 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The total number of jumbo packets transmitted out of the interface. | |||||||||||||||||||||
| CsnSwIfInfoMirrorMode | 1.3.6.1.4.1.1991.1.1.3.3.5.1.58 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable/disable mirror on this port.
| |||||||||||||||||||||
| CsnSwIfMacLearningDisable | 1.3.6.1.4.1.1991.1.1.3.3.5.1.59 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current The status of MAC learning feature on an ethernet port. For POS port, Get operation will return the default value and Set operation will return an error. | |||||||||||||||||||||
| CsnSwIfInfoNativeMacAddress | 1.3.6.1.4.1.1991.1.1.3.3.5.1.62 | PhysAddress | RO | ||||||||||||||||||
column · PhysAddress · read-only · current The port native MAC address. The native MAC address represents the switch port. | |||||||||||||||||||||
| CsnSwIfQosMonitorDropCounterMode | 1.3.6.1.4.1.1991.1.1.3.3.5.1.63 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable/disable monitoring egress drop counter on this port. ICX7150 has a set of queue drop counters. A port can be selected to associate with these counters. Only when the port is selected, these drop counters can be monitored and included in the total egress drop for the port. Please note that only one port can be selected in a unit. This object is only applied to ICX7150 platform, and is enabled by default on other FI platforms
| |||||||||||||||||||||
| CsnSwIfLRMAdapterPresent | 1.3.6.1.4.1.1991.1.1.3.3.5.1.64 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current To display the state for Long Reach Module (LRM) adapter is presented on this port. Some FastIron ICX devices support LRM optics on 10G fiber ports. LRM adapter (Fluffy) is used to support LRM optics on those switch ports. false: the port is not connected to LRM adapter true: the port is connected to LRM adapter The default is false state | |||||||||||||||||||||
| CsnSwIfStpBPDUGuardMode | 1.3.6.1.4.1.1991.1.1.3.3.5.1.65 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current The status of the spanning tree BPDU guard on an ethernet port. The default is false state. | |||||||||||||||||||||
| CsnSwIfStpRootGuardMode | 1.3.6.1.4.1.1991.1.1.3.3.5.1.66 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current The status of the spanning tree root guard on an ethernet port. Declare the port to be on root guard for all spanning trees. The default is false state. | |||||||||||||||||||||
| CsnSwIfRstpAdminEdgePortMode | 1.3.6.1.4.1.1991.1.1.3.3.5.1.67 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current The status of the rapid spanning tree admin edge port on an ethernet port. Declare the port to be an operational edge for all vlans. The default is false state. | |||||||||||||||||||||
| CsnSwIfInfoClockMode | 1.3.6.1.4.1.1991.1.1.3.3.5.1.68 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The port can be configured to operate in either
master or slave mode. The values are:
none(0).........no configured or no support for clock mode, like fiber ports.
master(1).......master mode
slave(2)........slave mode
auto(3)........auto mode, this is the default value for copper ports
| |||||||||||||||||||||
| CsnSwIfProtectedMode | 1.3.6.1.4.1.1991.1.1.3.3.5.1.69 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Protected port is a port-level, per-device/stack only, security feature that restricts communication with a device connected to the port. The default is false state. | |||||||||||||||||||||
| CsnSwIfTrustDscpMode | 1.3.6.1.4.1.1991.1.1.3.3.5.1.70 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current The status of Trust DSCP on an ethernet port. The default is false state. | |||||||||||||||||||||
| CsnSwIfVoiceVlanId | 1.3.6.1.4.1.1991.1.1.3.3.5.1.71 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current VLAN can be configurated as a voice over IP VLAN on an ethernet port. The valid range of voice VLAN ID is 1-4095. The value 0 means that the voice VLAN is not configurated or is not applicable | |||||||||||||||||||||
| TsnIfOpticalMonitoringInfoTable | 1.3.6.1.4.1.1991.1.1.3.3.6 | NA | |||||||||||||||||||
table · not-accessible · current This table lists the instrumented parameters of all optical interfaces. | |||||||||||||||||||||
| RsnIfOpticalMonitoringInfoEntry | 1.3.6.1.4.1.1991.1.1.3.3.6.1 | NA | |||||||||||||||||||
row · not-accessible · current Only the ifIndices of optical interfaces whose parameters need to be monitored will be used to index this table.
| |||||||||||||||||||||
| CsnIfOpticalMonitoringTemperature | 1.3.6.1.4.1.1991.1.1.3.3.6.1.1 | DisplayString (SIZE (0..32)) | RO | N/A | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current This object holds the value of the transmitter laser diode temperature for the interface. This object indicates the health of the transmitter. The format is xxx.yyyy C(elcius), followed by whether the measured value is normal, high/low alarm or high/low warning. | |||||||||||||||||||||
| CsnIfOpticalMonitoringTxPower | 1.3.6.1.4.1.1991.1.1.3.3.6.1.2 | DisplayString (SIZE (0..32)) | RO | N/A | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current This object holds the value of the transmitter optical signal power for the interface, measured in dBm, followed by whether this is a normal value, or high/low warning or alarm. | |||||||||||||||||||||
| CsnIfOpticalMonitoringRxPower | 1.3.6.1.4.1.1991.1.1.3.3.6.1.3 | DisplayString (SIZE (0..32)) | RO | N/A | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current This object holds the value of the receiver optical signal power for the interface, measured in dBm, followed by whether this is a normal value, or high/low warning or alarm. | |||||||||||||||||||||
| CsnIfOpticalMonitoringTxBiasCurrent | 1.3.6.1.4.1.1991.1.1.3.3.6.1.4 | DisplayString (SIZE (0..32)) | RO | N/A | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Tx Bias Current. It is measured in mA, and is followed by whether this is a normal value, or high/low warning or alarm. | |||||||||||||||||||||
| TsnInterfaceLookup2Table | 1.3.6.1.4.1.1991.1.1.3.3.7 | NA | |||||||||||||||||||
| RsnInterfaceLookup2Entry | 1.3.6.1.4.1.1991.1.1.3.3.7.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CsnInterfaceLookup2InterfaceId | 1.3.6.1.4.1.1991.1.1.3.3.7.1.1 | InterfaceId2 | NA | ||||||||||||||||||
| CsnInterfaceLookup2IfIndex | 1.3.6.1.4.1.1991.1.1.3.3.7.1.2 | Integer32 | RO | ||||||||||||||||||
| TsnIfIndexLookup2Table | 1.3.6.1.4.1.1991.1.1.3.3.8 | NA | |||||||||||||||||||
| RsnIfIndexLookup2Entry | 1.3.6.1.4.1.1991.1.1.3.3.8.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CsnIfIndexLookup2IfIndex | 1.3.6.1.4.1.1991.1.1.3.3.8.1.1 | Integer32 | NA | ||||||||||||||||||
| CsnIfIndexLookup2InterfaceId | 1.3.6.1.4.1.1991.1.1.3.3.8.1.2 | InterfaceId2 | RO | ||||||||||||||||||
| TsnIfMediaInfoTable | 1.3.6.1.4.1.1991.1.1.3.3.9 | NA | |||||||||||||||||||
table · not-accessible · current This table lists the information of the media device (SFP/XFP/Copper) installed in the physical port. Only the ifIndices of Ethernet ports those are associated with the operational cards will be included in this table. | |||||||||||||||||||||
| RsnIfMediaInfoEntry | 1.3.6.1.4.1.1991.1.1.3.3.9.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the Interface Media Information table. The ifIndices of ethernet interfaces will be used to index this table.
| |||||||||||||||||||||
| CsnIfMediaType | 1.3.6.1.4.1.1991.1.1.3.3.9.1.1 | DisplayString (SIZE (0..128)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..128)) · read-only · current The type of the media installed in the physical port. | |||||||||||||||||||||
| CsnIfMediaVendorName | 1.3.6.1.4.1.1991.1.1.3.3.9.1.2 | DisplayString (SIZE (0..128)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..128)) · read-only · current The media vendor name, full name of the corporation. | |||||||||||||||||||||
| CsnIfMediaVersion | 1.3.6.1.4.1.1991.1.1.3.3.9.1.3 | DisplayString (SIZE (0..128)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..128)) · read-only · current The media vendor product version number. | |||||||||||||||||||||
| CsnIfMediaPartNumber | 1.3.6.1.4.1.1991.1.1.3.3.9.1.4 | DisplayString (SIZE (0..128)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..128)) · read-only · current The media vendor part number. | |||||||||||||||||||||
| CsnIfMediaSerialNumber | 1.3.6.1.4.1.1991.1.1.3.3.9.1.5 | DisplayString (SIZE (0..128)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..128)) · read-only · current The vendor serial number of the media device. | |||||||||||||||||||||
| TsnIfOpticalLaneMonitoringTable | 1.3.6.1.4.1.1991.1.1.3.3.10 | NA | |||||||||||||||||||
table · not-accessible · current This table lists the instrumented parameters of all lanes within a 100G optic of type LR4 and LR10. LR4 has 4 lanes per optic, LR10 has 10 lanes per optic. | |||||||||||||||||||||
| RsnIfOpticalLaneMonitoringEntry | 1.3.6.1.4.1.1991.1.1.3.3.10.1 | NA | |||||||||||||||||||
row · not-accessible · current Only the ifIndices of optical interfaces whose parameters need to be monitored will be used to index this table. | |||||||||||||||||||||
| CsnIfOpticalLaneMonitoringLane | 1.3.6.1.4.1.1991.1.1.3.3.10.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current The lane number of this 100G optic. LR4 has 4, and LR10 has 10 lanes. | |||||||||||||||||||||
| CsnIfOpticalLaneMonitoringTemperature | 1.3.6.1.4.1.1991.1.1.3.3.10.1.2 | DisplayString (SIZE (0..32)) | RO | 37.1484 C Normal | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current This object holds the value of the transmitter laser diode temperature for the lane in the interface. This object indicates the health of the transmitter. The format is xxx.yyyy C(elcius), followed by whether the measured value is normal, high/low alarm or high/low warning. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsnIfOpticalLaneMonitoringTxPower | 1.3.6.1.4.1.1991.1.1.3.3.10.1.3 | DisplayString (SIZE (0..32)) | RO | 001.2296 dBm Normal | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current This object holds the value of the transmitter optical signal power for the lane in the interface, measured in dBm, followed by whether this is a normal value, or high/low warning or alarm. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsnIfOpticalLaneMonitoringRxPower | 1.3.6.1.4.1.1991.1.1.3.3.10.1.4 | DisplayString (SIZE (0..32)) | RO | -004.2021 dBm Normal | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current This object holds the value of the receiver optical signal power for the lane in the interface, measured in dBm, followed by whether this is a normal value, or high/low warning or alarm. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsnIfOpticalLaneMonitoringTxBiasCurrent | 1.3.6.1.4.1.1991.1.1.3.3.10.1.5 | DisplayString (SIZE (0..32)) | RO | 33.152 mA Normal | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Tx Bias Current. It is measured in mA, and is followed by whether this is a normal value, or high/low warning or alarm. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsnIfOpticalLaneMonitoringVoltage | 1.3.6.1.4.1.1991.1.1.3.3.10.1.6 | DisplayString (SIZE (0..32)) | RO | 3.2298 volts Normal | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current This object holds the value of the transmitter laser diode voltage for the lane in the interface. This object indicates the health of the transmitter. The format is xxx.yyyy volts, followed by whether the measured value is normal, high/low alarm or high/low warning. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TbrcdIfEgressCounterInfoTable | 1.3.6.1.4.1.1991.1.1.3.3.11 | NA | |||||||||||||||||||
table · not-accessible · current This table lists the information of egress counters of all the queues in the physical ports. | |||||||||||||||||||||
| RbrcdIfEgressCounterInfoEntry | 1.3.6.1.4.1.1991.1.1.3.3.11.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the Interface Egress Counter Information table. The ifIndices of ethernet interfaces and the queue number will be used to index this table. | |||||||||||||||||||||
| CbrcdIfEgressCounterIfIndex | 1.3.6.1.4.1.1991.1.1.3.3.11.1.1 | InterfaceIndex | NA | ||||||||||||||||||
column · InterfaceIndex · not-accessible · current The port number of egress counter in the physical port. The port/interface index (ifindex). | |||||||||||||||||||||
| CbrcdIfEgressCounterQueueId | 1.3.6.1.4.1.1991.1.1.3.3.11.1.2 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current The queue number of egress counter in the given port. | |||||||||||||||||||||
| CbrcdIfEgressCounterType | 1.3.6.1.4.1.1991.1.1.3.3.11.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The queue type of the egress counter in a given port.
| |||||||||||||||||||||
| CbrcdIfEgressCounterPkts | 1.3.6.1.4.1.1991.1.1.3.3.11.1.4 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The egress packet counters of the queue in a given port. | |||||||||||||||||||||
| CbrcdIfEgressCounterDropPkts | 1.3.6.1.4.1.1991.1.1.3.3.11.1.5 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The egress dropped packet counters of the queue in a given port. ICX7150 platform has another set of queue drop counters which are displayed only when the port is monitored using the object, snSwIfQosMonitorDropCounterMode or CLI command. Without the above port selection, only a partial amount of the total drop counters may be displayed. | |||||||||||||||||||||
| TsnSwIfInfoLimitTable | 1.3.6.1.4.1.1991.1.1.3.3.12 | NA | |||||||||||||||||||
table · not-accessible · current Rate limiting table for different types of traffic for a port. | |||||||||||||||||||||
| RsnSwIfInfoLimitEntry | 1.3.6.1.4.1.1991.1.1.3.3.12.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the snSwIfInfoLimit table indicates the configuration on a specified port for rate limiting values. | |||||||||||||||||||||
| CsnSwIfInfoLimitType | 1.3.6.1.4.1.1991.1.1.3.3.12.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type of the limit, the values specified in this row applies for, which takes on values broadcast, multicast, unknown-unicast.
| |||||||||||||||||||||
| CsnSwIfInfoLimitPkts | 1.3.6.1.4.1.1991.1.1.3.3.12.1.2 | Unsigned32 (0..8388607) | RO | ||||||||||||||||||
column · Unsigned32 (0..8388607) · read-only · current Limit the number of packets to forward per second out of the switch port. Setting a value of 0 to this object disables the limitation check. | |||||||||||||||||||||
| CsnSwIfInfoLimitBits | 1.3.6.1.4.1.1991.1.1.3.3.12.1.3 | Unsigned32 (0..8388607) | RO | ||||||||||||||||||
column · Unsigned32 (0..8388607) · read-only · current Limit the number of kilo bytes to forward per second out
of the switch port. Setting a value of 0 to this object
disables the limitation check.
| |||||||||||||||||||||
| CsnSwIfInfoLimitThreshold | 1.3.6.1.4.1.1991.1.1.3.3.12.1.4 | Unsigned32 (1..1048576) | RO | ||||||||||||||||||
column · Unsigned32 (1..1048576) · read-only · current The number of packets to be dropped when the rate limit is reached before taking the specified action like shutdown port. | |||||||||||||||||||||
| CsnSwIfInfoLimitShutdownTime | 1.3.6.1.4.1.1991.1.1.3.3.12.1.5 | Unsigned32 (0..65535) | RO | ||||||||||||||||||
column · Unsigned32 (0..65535) · read-only · current Specifies the time the port should be in down state and this takes effect only if Threshold is configured.
| |||||||||||||||||||||
| CsnSwIfInfoLimitLog | 1.3.6.1.4.1.1991.1.1.3.3.12.1.6 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Enable or disable the logging of the rate limit occurances. | |||||||||||||||||||||
| NsnFdbInfo | 1.3.6.1.4.1.1991.1.1.3.4 | ||||||||||||||||||||
| TsnFdbTable | 1.3.6.1.4.1.1991.1.1.3.4.1 | NA | |||||||||||||||||||
table · not-accessible · current This table contains snFdb information for each station known to the system, one entry per station. | |||||||||||||||||||||
| RsnFdbEntry | 1.3.6.1.4.1.1991.1.1.3.4.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry represents the information of a static MAC station.
| |||||||||||||||||||||
| CsnFdbStationIndex | 1.3.6.1.4.1.1991.1.1.3.4.1.1.1 | INTEGER (1..256) | RO | ||||||||||||||||||
column · INTEGER (1..256) · read-only · current The FDB Station index to the Fdb Station Table. | |||||||||||||||||||||
| CsnFdbStationAddr | 1.3.6.1.4.1.1991.1.1.3.4.1.1.2 | PhysAddress | RW | ||||||||||||||||||
column · PhysAddress · read-write · current The snFdbs physical address. The physical address represents a MAC Station. | |||||||||||||||||||||
| CsnFdbStationPort | 1.3.6.1.4.1.1991.1.1.3.4.1.1.3 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Station slot/port number. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only). | |||||||||||||||||||||
| CsnFdbVLanId | 1.3.6.1.4.1.1991.1.1.3.4.1.1.4 | INTEGER (1..65535) | RW | ||||||||||||||||||
column · INTEGER (1..65535) · read-write · current The Station VLan ID. | |||||||||||||||||||||
| CsnFdbStationQos | 1.3.6.1.4.1.1991.1.1.3.4.1.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The Stand alone stackable station Qos Priority values are: low(0) -- low prority high(1) -- high prority. The BigIron switch station Priority values are: level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)
| |||||||||||||||||||||
| CsnFdbStationType | 1.3.6.1.4.1.1991.1.1.3.4.1.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The station type values are: notSupported -- a read value only : this product does not support MultiLayer Switching. host -- any MAC station. router -- a router-typed station.
| |||||||||||||||||||||
| CsnFdbRowStatus | 1.3.6.1.4.1.1991.1.1.3.4.1.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid
| |||||||||||||||||||||
| CsnFdbStationIf | 1.3.6.1.4.1.1991.1.1.3.4.1.1.8 | InterfaceIndex | RW | ||||||||||||||||||
column · InterfaceIndex · read-write · current Station interface index. | |||||||||||||||||||||
| NsnPortStpInfo | 1.3.6.1.4.1.1991.1.1.3.5 | ||||||||||||||||||||
| TsnPortStpTable | 1.3.6.1.4.1.1991.1.1.3.5.1 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated A specific snPortStpTable consists of a number of switch ports. This table only exists if only if snVLanByPortCfgTable exists and snVLanByPortCfgStpMode is enabled for each VLAN. | |||||||||||||||||||||
| RsnPortStpEntry | 1.3.6.1.4.1.1991.1.1.3.5.1.1 | NA | deprecated | ||||||||||||||||||
row · not-accessible · deprecated An entry in the snPortStpTable indicates the configuration on a specified port. A SNMP SET PDU for a row of the snPortStpTable requires the entired sequence of the MIB Objects in each snPortStpEntry stored in one PDU. Otherwise, GENERR return-value will be returned. | |||||||||||||||||||||
| CsnPortStpVLanId | 1.3.6.1.4.1.1991.1.1.3.5.1.1.1 | INTEGER (1..65535) | RO | deprecated | |||||||||||||||||
column · INTEGER (1..65535) · read-only · deprecated The VLAN ID of the VLAN switch community. | |||||||||||||||||||||
| CsnPortStpPortNum | 1.3.6.1.4.1.1991.1.1.3.5.1.1.2 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated The port number of the Switch. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only). | |||||||||||||||||||||
| CsnPortStpPortPriority | 1.3.6.1.4.1.1991.1.1.3.5.1.1.3 | INTEGER (0..255) | RW | deprecated | |||||||||||||||||
column · INTEGER (0..255) · read-write · deprecated The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort. | |||||||||||||||||||||
| CsnPortStpPathCost | 1.3.6.1.4.1.1991.1.1.3.5.1.1.4 | INTEGER (0..65535) | RW | deprecated | |||||||||||||||||
column · INTEGER (0..65535) · read-write · deprecated dot1dStpPortPathCost : The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. Writing value zero to this object sets path cost to a default value which automatically changes according to port speed. Reading value zero indicates an unknown path cost value because port speed cannot be determined due to speed auto sense in progress. | |||||||||||||||||||||
| CsnPortStpOperState | 1.3.6.1.4.1.1991.1.1.3.5.1.1.5 | INTEGER | RO | deprecated | |||||||||||||||||
column · INTEGER · read-only · deprecated By default, this mode is set to notActivated(0). notActivated(0)...the Port STP entry is not activated and not in running mode. activated(1)......the Port STP entry is activated and in running mode
| |||||||||||||||||||||
| CsnPortStpPortEnable | 1.3.6.1.4.1.1991.1.1.3.5.1.1.6 | INTEGER | NA | deprecated | |||||||||||||||||
column · INTEGER · not-accessible · deprecated The enabled/disabled status of the port.
| |||||||||||||||||||||
| CsnPortStpPortForwardTransitions | 1.3.6.1.4.1.1991.1.1.3.5.1.1.7 | Counter32 | NA | deprecated | |||||||||||||||||
column · Counter32 · not-accessible · deprecated The number of times this port has transitioned from the Learning state to the Forwarding state. | |||||||||||||||||||||
| CsnPortStpPortState | 1.3.6.1.4.1.1991.1.1.3.5.1.1.8 | INTEGER | RO | deprecated | |||||||||||||||||
column · INTEGER · read-only · deprecated The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpPortEnable), this object will have a value of disabled(1).
| |||||||||||||||||||||
| CsnPortStpPortDesignatedCost | 1.3.6.1.4.1.1991.1.1.3.5.1.1.9 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. | |||||||||||||||||||||
| CsnPortStpPortDesignatedRoot | 1.3.6.1.4.1.1991.1.1.3.5.1.1.10 | BridgeId | RO | deprecated | |||||||||||||||||
column · BridgeId · read-only · deprecated The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached. | |||||||||||||||||||||
| CsnPortStpPortDesignatedBridge | 1.3.6.1.4.1.1991.1.1.3.5.1.1.11 | BridgeId | RO | deprecated | |||||||||||||||||
column · BridgeId · read-only · deprecated The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. | |||||||||||||||||||||
| CsnPortStpPortDesignatedPort | 1.3.6.1.4.1.1991.1.1.3.5.1.1.12 | OCTET STRING (SIZE (2)) | RO | deprecated | |||||||||||||||||
column · OCTET STRING (SIZE (2)) · read-only · deprecated The Port Identifier of the port on the Designated Bridge for this port's segment. | |||||||||||||||||||||
| CsnPortStpPortAdminRstp | 1.3.6.1.4.1.1991.1.1.3.5.1.1.13 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Enable or disable RSTP of a port which is a member of a VLAN. If the VLAN is not operating in RSTP, this object will return FALSE(2) and this object is not writable.
| |||||||||||||||||||||
| CsnPortStpPortProtocolMigration | 1.3.6.1.4.1.1991.1.1.3.5.1.1.14 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated When operating in RSTP (version 2) mode, writing TRUE(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read.
| |||||||||||||||||||||
| CsnPortStpPortAdminEdgePort | 1.3.6.1.4.1.1991.1.1.3.5.1.1.15 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indicates that this port should be assumed as a non-edge-port.
| |||||||||||||||||||||
| CsnPortStpPortAdminPointToPoint | 1.3.6.1.4.1.1991.1.1.3.5.1.1.16 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated The administrative point-to-point status of the LAN segment attached to this port. A value of TRUE(1) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of FALSE(2) indicates that this port should be treated as having a shared media connection.
| |||||||||||||||||||||
| TsnIfStpTable | 1.3.6.1.4.1.1991.1.1.3.5.2 | NA | |||||||||||||||||||
table · not-accessible · current A specific snIfStpTable consists of a number of switch ports. This table only exists if only if snVLanByPortCfgTable exists and snVLanByPortCfgStpMode is enabled for each VLAN. | |||||||||||||||||||||
| RsnIfStpEntry | 1.3.6.1.4.1.1991.1.1.3.5.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the snIfStpTable indicates the configuration on a specified port. A SNMP SET PDU for a row of the snIfStpTable requires the entired sequence of the MIB Objects in each snIfStpEntry stored in one PDU. Otherwise, GENERR return-value will be returned.
| |||||||||||||||||||||
| CsnIfStpVLanId | 1.3.6.1.4.1.1991.1.1.3.5.2.1.1 | INTEGER (1..65535) | RO | ||||||||||||||||||
column · INTEGER (1..65535) · read-only · current The VLAN ID of the VLAN switch community. | |||||||||||||||||||||
| CsnIfStpPortNum | 1.3.6.1.4.1.1991.1.1.3.5.2.1.2 | InterfaceIndex | RO | ||||||||||||||||||
column · InterfaceIndex · read-only · current The port number of the Switch. It has the ifIndex value. | |||||||||||||||||||||
| CsnIfStpPortPriority | 1.3.6.1.4.1.1991.1.1.3.5.2.1.3 | INTEGER (0..255) | RW | ||||||||||||||||||
column · INTEGER (0..255) · read-write · current The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort. | |||||||||||||||||||||
| CsnIfStpCfgPathCost | 1.3.6.1.4.1.1991.1.1.3.5.2.1.4 | INTEGER (0..200000000) | RW | ||||||||||||||||||
column · INTEGER (0..200000000) · read-write · current dot1dStpPortPathCost : The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. Writing value zero to this object sets path cost to a default value which automatically changes according to port speed. | |||||||||||||||||||||
| CsnIfStpOperState | 1.3.6.1.4.1.1991.1.1.3.5.2.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current By default, this mode is set to notActivated(0). notActivated(0)...the Port STP or RSTP entry is not configured and not in running mode. activated(1)......the Port STP or RSTP entry is enabled
| |||||||||||||||||||||
| CsnIfStpPortState | 1.3.6.1.4.1.1991.1.1.3.5.2.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpPortEnable), this object will have a value of disabled(1).
| |||||||||||||||||||||
| CsnIfStpPortDesignatedCost | 1.3.6.1.4.1.1991.1.1.3.5.2.1.9 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. | |||||||||||||||||||||
| CsnIfStpPortDesignatedRoot | 1.3.6.1.4.1.1991.1.1.3.5.2.1.10 | BridgeId | RO | ||||||||||||||||||
column · BridgeId · read-only · current The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached. | |||||||||||||||||||||
| CsnIfStpPortDesignatedBridge | 1.3.6.1.4.1.1991.1.1.3.5.2.1.11 | BridgeId | RO | ||||||||||||||||||
column · BridgeId · read-only · current The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. | |||||||||||||||||||||
| CsnIfStpPortDesignatedPort | 1.3.6.1.4.1.1991.1.1.3.5.2.1.12 | OCTET STRING (SIZE (2)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (2)) · read-only · current The Port Identifier of the port on the Designated Bridge for this port's segment. | |||||||||||||||||||||
| CsnIfStpPortAdminRstp | 1.3.6.1.4.1.1991.1.1.3.5.2.1.13 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Enable or disable RSTP of a port which is a member of a VLAN. If the VLAN is not operating in RSTP, this object will return FALSE(2) and this object is not writable. | |||||||||||||||||||||
| CsnIfStpPortProtocolMigration | 1.3.6.1.4.1.1991.1.1.3.5.2.1.14 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current When operating in RSTP (version 2) mode, writing TRUE(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read. | |||||||||||||||||||||
| CsnIfStpPortAdminEdgePort | 1.3.6.1.4.1.1991.1.1.3.5.2.1.15 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indicates that this port should be assumed as a non-edge-port. | |||||||||||||||||||||
| CsnIfStpPortAdminPointToPoint | 1.3.6.1.4.1.1991.1.1.3.5.2.1.16 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current The administrative point-to-point status of the LAN segment attached to this port. A value of TRUE(1) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of FALSE(2) indicates that this port should be treated as having a shared media connection. | |||||||||||||||||||||
| CsnIfStpOperPathCost | 1.3.6.1.4.1.1991.1.1.3.5.2.1.17 | INTEGER (0..200000000) | RO | ||||||||||||||||||
column · INTEGER (0..200000000) · read-only · current dot1dStpPortPathCost : The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. Reading value zero indicates an unknown path cost value because port speed cannot be determined due to speed auto sense in progress or port link is down. | |||||||||||||||||||||
| CsnIfStpPortRole | 1.3.6.1.4.1.1991.1.1.3.5.2.1.18 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current STP/RSTP port role.
| |||||||||||||||||||||
| CsnIfStpBPDUTransmitted | 1.3.6.1.4.1.1991.1.1.3.5.2.1.19 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current STP/RSTP bridge protocol unit transmitted counter. | |||||||||||||||||||||
| CsnIfStpBPDUReceived | 1.3.6.1.4.1.1991.1.1.3.5.2.1.20 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current STP/RSTP bridge protocol unit received counter. | |||||||||||||||||||||
| CsnIfRstpConfigBPDUReceived | 1.3.6.1.4.1.1991.1.1.3.5.2.1.21 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current RSTP configuration bridge protocol unit received counter. | |||||||||||||||||||||
| CsnIfRstpTCNBPDUReceived | 1.3.6.1.4.1.1991.1.1.3.5.2.1.22 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current RSTP topology change notification bridge protocol unit received counter. | |||||||||||||||||||||
| CsnIfRstpConfigBPDUTransmitted | 1.3.6.1.4.1.1991.1.1.3.5.2.1.23 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current RSTP configuration bridge protocol unit transmitted counter. | |||||||||||||||||||||
| CsnIfRstpTCNBPDUTransmitted | 1.3.6.1.4.1.1991.1.1.3.5.2.1.24 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current RSTP topology change notification bridge protocol unit transmitted counter. | |||||||||||||||||||||
| NsnTrunkInfo | 1.3.6.1.4.1.1991.1.1.3.6 | ||||||||||||||||||||
| TsnTrunkTable | 1.3.6.1.4.1.1991.1.1.3.6.1 | NA | |||||||||||||||||||
table · not-accessible · current A specific snTrunkTable consists of a number of Trunk port-mask. | |||||||||||||||||||||
| RsnTrunkEntry | 1.3.6.1.4.1.1991.1.1.3.6.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the snTrunkTable indicates the configuration on a specified Trunk port membership.
| |||||||||||||||||||||
| CsnTrunkIndex | 1.3.6.1.4.1.1991.1.1.3.6.1.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The number of the trunk entries can be configured. This can be 32*<slots> for Jetcore, and 16*<slots> for Ironcore. | |||||||||||||||||||||
| CsnTrunkPortMask | 1.3.6.1.4.1.1991.1.1.3.6.1.1.2 | PortMask | RW | ||||||||||||||||||
column · PortMask · read-write · current Trunk membership of the Switch. | |||||||||||||||||||||
| CsnTrunkType | 1.3.6.1.4.1.1991.1.1.3.6.1.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The trunk connection type which specifies what device the trunk ports are connected to.
| |||||||||||||||||||||
| TsnMSTrunkTable | 1.3.6.1.4.1.1991.1.1.3.6.2 | NA | |||||||||||||||||||
table · not-accessible · current A table contains the configuration of port members of multi-slot trunk groups. | |||||||||||||||||||||
| RsnMSTrunkEntry | 1.3.6.1.4.1.1991.1.1.3.6.2.1 | NA | |||||||||||||||||||
| CsnMSTrunkPortIndex | 1.3.6.1.4.1.1991.1.1.3.6.2.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The primary port of a trunk group. For module with Gig ports, primary port is port 1, 3, 5, 7. For module with 10/100 ports, primary port is port 1, 5, 9, 13, 17, 21. | |||||||||||||||||||||
| CsnMSTrunkPortList | 1.3.6.1.4.1.1991.1.1.3.6.2.1.2 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current A list of port indices which are the port membership of a trunk group. Each port index is a 16-bit integer in big endian order. The first port index must be the primary port index. | |||||||||||||||||||||
| CsnMSTrunkType | 1.3.6.1.4.1.1991.1.1.3.6.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The trunk connection type which specifies what device the trunk ports are connected to.
| |||||||||||||||||||||
| CsnMSTrunkRowStatus | 1.3.6.1.4.1.1991.1.1.3.6.2.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current To create or delete a table entry.
| |||||||||||||||||||||
| TsnMSTrunkIfTable | 1.3.6.1.4.1.1991.1.1.3.6.3 | NA | |||||||||||||||||||
table · not-accessible · current A table contains the configuration of port members of multi-slot trunk groups. | |||||||||||||||||||||
| RsnMSTrunkIfEntry | 1.3.6.1.4.1.1991.1.1.3.6.3.1 | NA | |||||||||||||||||||
| CsnMSTrunkIfIndex | 1.3.6.1.4.1.1991.1.1.3.6.3.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The primary port(IfIndex) of a trunk group. For module with Gig ports, primary port is port 1, 3, 5, 7. For module with 10/100 ports, primary port is port 1, 5, 9, 13, 17, 21. | |||||||||||||||||||||
| CsnMSTrunkIfList | 1.3.6.1.4.1.1991.1.1.3.6.3.1.2 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current A list of interface indices which are the port membership of a trunk group. Each interface index is a 16-bit integer in big endian order. The first interface/port index must be the primary port(ifIndex) index. | |||||||||||||||||||||
| CsnMSTrunkIfType | 1.3.6.1.4.1.1991.1.1.3.6.3.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The trunk connection type which specifies what device the trunk ports are connected to.
| |||||||||||||||||||||
| CsnMSTrunkIfRowStatus | 1.3.6.1.4.1.1991.1.1.3.6.3.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current To create or delete a table entry.
| |||||||||||||||||||||
| NsnSwSummary | 1.3.6.1.4.1.1991.1.1.3.7 | ||||||||||||||||||||
| SsnSwSummaryMode | 1.3.6.1.4.1.1991.1.1.3.7.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The Switch Group Configuration Summary is configured either enabled or disabled and the default is disabled mode. enabled(1)...........activate Switch Configuration Summary. disabled(0)..........no Switch Configuration Summary.
| |||||||||||||||||||||
| NsnDhcpGatewayListInfo | 1.3.6.1.4.1.1991.1.1.3.8 | ||||||||||||||||||||
| TsnDhcpGatewayListTable | 1.3.6.1.4.1.1991.1.1.3.8.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of DHCP gateway list of addresses. | |||||||||||||||||||||
| RsnDhcpGatewayListEntry | 1.3.6.1.4.1.1991.1.1.3.8.1.1 | NA | |||||||||||||||||||
| CsnDhcpGatewayListId | 1.3.6.1.4.1.1991.1.1.3.8.1.1.1 | INTEGER (1..32) | RO | ||||||||||||||||||
column · INTEGER (1..32) · read-only · current The ID for a DHCP gateway list entry. | |||||||||||||||||||||
| CsnDhcpGatewayListAddrList | 1.3.6.1.4.1.1991.1.1.3.8.1.1.2 | OCTET STRING (SIZE (4..32)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (4..32)) · read-write · current The DHCP gateway address list for each DHCP gateway list ID. This list contains 1 to 8 IP addresses represented by octet string. | |||||||||||||||||||||
| CsnDhcpGatewayListRowStatus | 1.3.6.1.4.1.1991.1.1.3.8.1.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row or modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid
| |||||||||||||||||||||
| NsnDnsInfo | 1.3.6.1.4.1.1991.1.1.3.9 | ||||||||||||||||||||
| SsnDnsDomainName | 1.3.6.1.4.1.1991.1.1.3.9.1 | DisplayString (SIZE (0..80)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..80)) · read-write · current DNS Domain Name string. | |||||||||||||||||||||
| SsnDnsGatewayIpAddrList | 1.3.6.1.4.1.1991.1.1.3.9.2 | OCTET STRING (SIZE (16)) | RW | ||||||||||||||||||
scalar · OCTET STRING (SIZE (16)) · read-write · current The DNS Gateway IP address list. This list contains 4 IP addresses represented by octet string. | |||||||||||||||||||||
| NsnMacFilter | 1.3.6.1.4.1.1991.1.1.3.10 | ||||||||||||||||||||
| TsnMacFilterTable | 1.3.6.1.4.1.1991.1.1.3.10.1 | NA | |||||||||||||||||||
table · not-accessible · current MAC filter table. | |||||||||||||||||||||
| RsnMacFilterEntry | 1.3.6.1.4.1.1991.1.1.3.10.1.1 | NA | |||||||||||||||||||
| CsnMacFilterIndex | 1.3.6.1.4.1.1991.1.1.3.10.1.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The table index for a filter entry. | |||||||||||||||||||||
| CsnMacFilterAction | 1.3.6.1.4.1.1991.1.1.3.10.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Action to take if the Mac packet match with this filter.
| |||||||||||||||||||||
| CsnMacFilterSourceMac | 1.3.6.1.4.1.1991.1.1.3.10.1.1.3 | MacAddress | RW | ||||||||||||||||||
column · MacAddress · read-write · current Source MAC address. | |||||||||||||||||||||
| CsnMacFilterSourceMask | 1.3.6.1.4.1.1991.1.1.3.10.1.1.4 | MacAddress | RW | ||||||||||||||||||
column · MacAddress · read-write · current Source MAC subnet mask. | |||||||||||||||||||||
| CsnMacFilterDestMac | 1.3.6.1.4.1.1991.1.1.3.10.1.1.5 | MacAddress | RW | ||||||||||||||||||
column · MacAddress · read-write · current Destination MAC address. | |||||||||||||||||||||
| CsnMacFilterDestMask | 1.3.6.1.4.1.1991.1.1.3.10.1.1.6 | MacAddress | RW | ||||||||||||||||||
column · MacAddress · read-write · current Destination MAC subnet mask. | |||||||||||||||||||||
| CsnMacFilterOperator | 1.3.6.1.4.1.1991.1.1.3.10.1.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Type of comparison to perform.
| |||||||||||||||||||||
| CsnMacFilterFrameType | 1.3.6.1.4.1.1991.1.1.3.10.1.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Frame Type: ethernet-type, LLC and SNAP types
| |||||||||||||||||||||
| CsnMacFilterFrameTypeNum | 1.3.6.1.4.1.1991.1.1.3.10.1.1.9 | INTEGER (0..65535) | RW | ||||||||||||||||||
column · INTEGER (0..65535) · read-write · current Frame Type Number. 0 means NA | |||||||||||||||||||||
| CsnMacFilterRowStatus | 1.3.6.1.4.1.1991.1.1.3.10.1.1.10 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| |||||||||||||||||||||
| TsnMacFilterPortAccessTable | 1.3.6.1.4.1.1991.1.1.3.10.2 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated MAC Filter port access table. | |||||||||||||||||||||
| RsnMacFilterPortAccessEntry | 1.3.6.1.4.1.1991.1.1.3.10.2.1 | NA | deprecated | ||||||||||||||||||
row · not-accessible · deprecated An entry in the MAC Filter Port access table. | |||||||||||||||||||||
| CsnMacFilterPortAccessPortIndex | 1.3.6.1.4.1.1991.1.1.3.10.2.1.1 | INTEGER (1..3900) | RO | deprecated | |||||||||||||||||
column · INTEGER (1..3900) · read-only · deprecated The port index. For FastIron/NetIron products, port index value is from 1 to 42 For BigIron products, port index is an encoded number: The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number. For virtual router interface, slot number is 15, port number is the virtual router port from 1 to 60. Therefore, port index value for BigIron is from 257 to 3900. | |||||||||||||||||||||
| CsnMacFilterPortAccessFilters | 1.3.6.1.4.1.1991.1.1.3.10.2.1.2 | OCTET STRING | RW | deprecated | |||||||||||||||||
column · OCTET STRING · read-write · deprecated 1st octet correspond to 1st filter number and so on. | |||||||||||||||||||||
| CsnMacFilterPortAccessRowStatus | 1.3.6.1.4.1.1991.1.1.3.10.2.1.3 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| |||||||||||||||||||||
| TsnMacFilterIfAccessTable | 1.3.6.1.4.1.1991.1.1.3.10.3 | NA | |||||||||||||||||||
table · not-accessible · current MAC Filter port access table. | |||||||||||||||||||||
| RsnMacFilterIfAccessEntry | 1.3.6.1.4.1.1991.1.1.3.10.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the MAC Filter Port access table. | |||||||||||||||||||||
| CsnMacFilterIfAccessPortIndex | 1.3.6.1.4.1.1991.1.1.3.10.3.1.1 | InterfaceIndex | RO | ||||||||||||||||||
column · InterfaceIndex · read-only · current The port/interface index. | |||||||||||||||||||||
| CsnMacFilterIfAccessFilters | 1.3.6.1.4.1.1991.1.1.3.10.3.1.2 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current 1st octet correspond to 1st filter number and so on. | |||||||||||||||||||||
| CsnMacFilterIfAccessRowStatus | 1.3.6.1.4.1.1991.1.1.3.10.3.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| |||||||||||||||||||||
| NsnNTP | 1.3.6.1.4.1.1991.1.1.3.11 | ||||||||||||||||||||
| NsnNTPGeneral | 1.3.6.1.4.1.1991.1.1.3.11.1 | ||||||||||||||||||||
| SsnNTPPollInterval | 1.3.6.1.4.1.1991.1.1.3.11.1.1 | INTEGER (1..65535) | RW | ||||||||||||||||||
scalar · INTEGER (1..65535) · read-write · current Interval specifies how often to poll the NTP server. Each unit is one second. | |||||||||||||||||||||
| SsnNTPTimeZone | 1.3.6.1.4.1.1991.1.1.3.11.1.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Time zone.
| |||||||||||||||||||||
| SsnNTPSummerTimeEnable | 1.3.6.1.4.1.1991.1.1.3.11.1.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/Disable daylight saving time. This enables daylight saving time for time/date starting 02:00:00 of first Sunday in April and ending 02:00:00 of last Sunday in October every year.
| |||||||||||||||||||||
| SsnNTPSystemClock | 1.3.6.1.4.1.1991.1.1.3.11.1.4 | OCTET STRING (SIZE (7)) | RW | ||||||||||||||||||
scalar · OCTET STRING (SIZE (7)) · read-write · current System clock, in the following format: octet 0: seconds after the minute [0-60] octet 1: minutes after the hour [0-59] octet 2: hours since midnight [0-23] octet 3: day of the month [1-31] octet 4: months since January [0-11] octet 5: years since 1900 octet 6: days since Sunday [0-6] Setting this object requires valid value in octets 0 to 5, and zero in octet 6. System clock can be disabled by setting zero to all octets. | |||||||||||||||||||||
| SsnNTPSync | 1.3.6.1.4.1.1991.1.1.3.11.1.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Initiate time synchronization to the NTP servers. For set operation, only 'synchronize(2)' is accepted. For get operation, always return 'other(1)'.
| |||||||||||||||||||||
| TsnNTPServerTable | 1.3.6.1.4.1.1991.1.1.3.11.2 | NA | |||||||||||||||||||
table · not-accessible · current NTP (Network Time Protocol) server table. | |||||||||||||||||||||
| RsnNTPServerEntry | 1.3.6.1.4.1.1991.1.1.3.11.2.1 | NA | |||||||||||||||||||
| CsnNTPServerIp | 1.3.6.1.4.1.1991.1.1.3.11.2.1.1 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current NTP server IP address. | |||||||||||||||||||||
| CsnNTPServerVersion | 1.3.6.1.4.1.1991.1.1.3.11.2.1.2 | INTEGER (1..4) | RW | ||||||||||||||||||
column · INTEGER (1..4) · read-write · current NTP server version. | |||||||||||||||||||||
| CsnNTPServerRowStatus | 1.3.6.1.4.1.1991.1.1.3.11.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current To create or delete a NTP server table entry.
| |||||||||||||||||||||
| NsnRadius | 1.3.6.1.4.1.1991.1.1.3.12 | ||||||||||||||||||||
| NsnRadiusGeneral | 1.3.6.1.4.1.1991.1.1.3.12.1 | ||||||||||||||||||||
| SsnRadiusSNMPAccess | 1.3.6.1.4.1.1991.1.1.3.12.1.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Indicate whether Radius group MIB obejcts can be accessed by SNMP manager. If value is disabled, all Radius group MIB objects return 'general error'.
| |||||||||||||||||||||
| SsnRadiusEnableTelnetAuth | 1.3.6.1.4.1.1991.1.1.3.12.1.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/Disable telnet authentication specified by 'snRadiusLoginMethod'.
| |||||||||||||||||||||
| SsnRadiusRetransmit | 1.3.6.1.4.1.1991.1.1.3.12.1.3 | INTEGER (0..5) | RW | ||||||||||||||||||
scalar · INTEGER (0..5) · read-write · current The number of authentication query retransmissions to the Radius server. | |||||||||||||||||||||
| SsnRadiusTimeOut | 1.3.6.1.4.1.1991.1.1.3.12.1.4 | INTEGER (1..60) | RW | ||||||||||||||||||
scalar · INTEGER (1..60) · read-write · current Interval specifies how long to wait for authentication reply from the Radius server, each unit is one second. | |||||||||||||||||||||
| SsnRadiusDeadTime | 1.3.6.1.4.1.1991.1.1.3.12.1.5 | INTEGER (1..5) | RW | ||||||||||||||||||
scalar · INTEGER (1..5) · read-write · current Interval specifies Radius server dead time, each unit is one minute. | |||||||||||||||||||||
| SsnRadiusKey | 1.3.6.1.4.1.1991.1.1.3.12.1.6 | DisplayString (SIZE (0..32)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-write · current Authentication key displayed as encrypted text. Write operation can only be done if the SET request uses SNMPv3 with data encrypted using privacy key. | |||||||||||||||||||||
| SsnRadiusLoginMethod | 1.3.6.1.4.1.1991.1.1.3.12.1.7 | OCTET STRING (SIZE (0..7)) | RW | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..7)) · read-write · current A sequence of authentication methods. Each octet represents a method to authenticate the user login process. Each octet has the following enumeration value: enable(1) - authenticate by command line interface enable password radius(2) - authenticate by requesting radius server local(3) - authenticate by local user account table line(4) - authenticate by telnet password tacplus(5) - authenticate by requesting tacplus server none(6) - do not authenticate tacacs(7) - authenticate by requesting tacacs server Setting a zero length octet string invalidates all previous authentication methods. | |||||||||||||||||||||
| SsnRadiusEnableMethod | 1.3.6.1.4.1.1991.1.1.3.12.1.8 | OCTET STRING (SIZE (0..7)) | RW | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..7)) · read-write · current A sequence of authentication methods. Each octet represents a method to authenticate the user entering priviledge mode of the command line interface. Each octet has the following enumeration value: enable(1) - authenticate by command line interface enable password radius(2) - authenticate by requesting radius server local(3) - authenticate by local user account table line(4) - authenticate by telnet password tacplus(5) - authenticate by requesting tacplus server none(6) - do not authenticate tacacs(7) - authenticate by requesting tacacs server Setting a zero length octet string invalidates all previous authentication methods. | |||||||||||||||||||||
| SsnRadiusWebServerMethod | 1.3.6.1.4.1.1991.1.1.3.12.1.9 | OCTET STRING (SIZE (0..7)) | RW | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..7)) · read-write · current A sequence of authentication methods. Each octet represents a method to authenticate the user accessing the web-server. Each octet has the following enumeration value: enable(1) - authenticate by command line interface enable password radius(2) - authenticate by requesting radius server local(3) - authenticate by local user account table line(4) - authenticate by telnet password tacplus(5) - authenticate by requesting tacplus server none(6) - do not authenticate tacacs(7) - authenticate by requesting tacacs server Setting a zero length octet string invalidates all previous authentication methods. | |||||||||||||||||||||
| SsnRadiusSNMPServerMethod | 1.3.6.1.4.1.1991.1.1.3.12.1.10 | OCTET STRING (SIZE (0..7)) | RW | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..7)) · read-write · current A sequence of authentication methods. Each octet represents a method to authenticate the user accessing the snmp-server. Each octet has the following enumeration value: enable(1) - authenticate by command line interface enable password radius(2) - authenticate by requesting radius server local(3) - authenticate by local user account table line(4) - authenticate by telnet password tacplus(5) - authenticate by requesting tacplus server none(6) - do not authenticate tacacs(7) - authenticate by requesting tacacs server Setting a zero length octet string invalidates all previous authentication methods. | |||||||||||||||||||||
| TsnRadiusServerTable | 1.3.6.1.4.1.1991.1.1.3.12.2 | NA | |||||||||||||||||||
table · not-accessible · current Radius server table. | |||||||||||||||||||||
| RsnRadiusServerEntry | 1.3.6.1.4.1.1991.1.1.3.12.2.1 | NA | |||||||||||||||||||
| CsnRadiusServerIp | 1.3.6.1.4.1.1991.1.1.3.12.2.1.1 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current Radius server IP address. | |||||||||||||||||||||
| CsnRadiusServerAuthPort | 1.3.6.1.4.1.1991.1.1.3.12.2.1.2 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Authentication UDP port number. | |||||||||||||||||||||
| CsnRadiusServerAcctPort | 1.3.6.1.4.1.1991.1.1.3.12.2.1.3 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Account UDP port number. | |||||||||||||||||||||
| CsnRadiusServerRowStatus | 1.3.6.1.4.1.1991.1.1.3.12.2.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current To create or delete a Radius server table entry.
| |||||||||||||||||||||
| CsnRadiusServerRowKey | 1.3.6.1.4.1.1991.1.1.3.12.2.1.5 | DisplayString (SIZE (0..32)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-write · current Authentication key displayed as encrypted text. | |||||||||||||||||||||
| CsnRadiusServerUsage | 1.3.6.1.4.1.1991.1.1.3.12.2.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current To allow this server to be dedicated for a particular AAA activity.
| |||||||||||||||||||||
| NsnTacacs | 1.3.6.1.4.1.1991.1.1.3.13 | ||||||||||||||||||||
| NsnTacacsGeneral | 1.3.6.1.4.1.1991.1.1.3.13.1 | ||||||||||||||||||||
| SsnTacacsRetransmit | 1.3.6.1.4.1.1991.1.1.3.13.1.1 | INTEGER (0..5) | RW | ||||||||||||||||||
scalar · INTEGER (0..5) · read-write · current The number of authentication query retransmissions to the Tacacs server. | |||||||||||||||||||||
| SsnTacacsTimeOut | 1.3.6.1.4.1.1991.1.1.3.13.1.2 | INTEGER (1..15) | RW | ||||||||||||||||||
scalar · INTEGER (1..15) · read-write · current Interval specifies how long to wait for authentication reply from the Tacacs server, each unit is one second. | |||||||||||||||||||||
| SsnTacacsDeadTime | 1.3.6.1.4.1.1991.1.1.3.13.1.3 | INTEGER (1..5) | RW | ||||||||||||||||||
scalar · INTEGER (1..5) · read-write · current Interval specifies Tacacs server dead time, each unit is one minute. | |||||||||||||||||||||
| SsnTacacsKey | 1.3.6.1.4.1.1991.1.1.3.13.1.4 | DisplayString (SIZE (0..32)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-write · current Authentication key displayed as encrypted text. Write operation can only be done if the SET request uses SNMPv3 with data encrypted using privacy key. | |||||||||||||||||||||
| SsnTacacsSNMPAccess | 1.3.6.1.4.1.1991.1.1.3.13.1.5 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Indicate whether Tacacs group MIB obejcts can be accessed by SNMP manager. If value is disabled, all Tacacs group MIB objects return 'general error'.
| |||||||||||||||||||||
| TsnTacacsServerTable | 1.3.6.1.4.1.1991.1.1.3.13.2 | NA | |||||||||||||||||||
table · not-accessible · current Tacacs server table. | |||||||||||||||||||||
| RsnTacacsServerEntry | 1.3.6.1.4.1.1991.1.1.3.13.2.1 | NA | |||||||||||||||||||
| CsnTacacsServerIp | 1.3.6.1.4.1.1991.1.1.3.13.2.1.1 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current Tacacs server IP address. | |||||||||||||||||||||
| CsnTacacsServerAuthPort | 1.3.6.1.4.1.1991.1.1.3.13.2.1.2 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Authentication UDP port number. | |||||||||||||||||||||
| CsnTacacsServerRowStatus | 1.3.6.1.4.1.1991.1.1.3.13.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current To create or delete a Tacacs server table entry.
| |||||||||||||||||||||
| CsnTacacsServerRowKey | 1.3.6.1.4.1.1991.1.1.3.13.2.1.4 | DisplayString (SIZE (0..32)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-write · current Authentication key displayed as encrypted text. Write operation can only be done if the SET request uses SNMPv3 with data encrypted using privacy key. | |||||||||||||||||||||
| CsnTacacsServerUsage | 1.3.6.1.4.1.1991.1.1.3.13.2.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current To allow this server to be dedicated for a particular AAA activity.
| |||||||||||||||||||||
| NsnQos | 1.3.6.1.4.1.1991.1.1.3.14 | ||||||||||||||||||||
| TsnQosProfileTable | 1.3.6.1.4.1.1991.1.1.3.14.1 | NA | |||||||||||||||||||
table · not-accessible · current A table contains the configuration of qos profile groups. | |||||||||||||||||||||
| RsnQosProfileEntry | 1.3.6.1.4.1.1991.1.1.3.14.1.1 | NA | |||||||||||||||||||
| CsnQosProfileIndex | 1.3.6.1.4.1.1991.1.1.3.14.1.1.1 | INTEGER (1..8) | RO | ||||||||||||||||||
column · INTEGER (1..8) · read-only · current The table index of QOS Profile. | |||||||||||||||||||||
| CsnQosProfileName | 1.3.6.1.4.1.1991.1.1.3.14.1.1.2 | DisplayString (SIZE (0..32)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-write · current Qos Profile Name string. | |||||||||||||||||||||
| CsnQosProfileRequestedBandwidth | 1.3.6.1.4.1.1991.1.1.3.14.1.1.3 | INTEGER (0..100) | RW | ||||||||||||||||||
column · INTEGER (0..100) · read-write · current Qos Profile Requested Bandwidth. | |||||||||||||||||||||
| CsnQosProfileCalculatedBandwidth | 1.3.6.1.4.1.1991.1.1.3.14.1.1.4 | INTEGER (0..100) | RO | ||||||||||||||||||
column · INTEGER (0..100) · read-only · current Qos Profile Calculated Bandwidth. | |||||||||||||||||||||
| TsnQosBindTable | 1.3.6.1.4.1.1991.1.1.3.14.2 | NA | |||||||||||||||||||
table · not-accessible · current A table contains the configuration of 802.1p to qos profile binding groups. | |||||||||||||||||||||
| RsnQosBindEntry | 1.3.6.1.4.1.1991.1.1.3.14.2.1 | NA | |||||||||||||||||||
| CsnQosBindIndex | 1.3.6.1.4.1.1991.1.1.3.14.2.1.1 | INTEGER (1..8) | RO | ||||||||||||||||||
column · INTEGER (1..8) · read-only · current The table index of QOS Bind. | |||||||||||||||||||||
| CsnQosBindPriority | 1.3.6.1.4.1.1991.1.1.3.14.2.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current QOS bind priority. | |||||||||||||||||||||
| CsnQosBindProfileIndex | 1.3.6.1.4.1.1991.1.1.3.14.2.1.3 | INTEGER (1..8) | RW | ||||||||||||||||||
column · INTEGER (1..8) · read-write · current QOS Bind Profile Index. This is pointer to the index of snQosProfile Table. | |||||||||||||||||||||
| NsnDosAttack | 1.3.6.1.4.1.1991.1.1.3.14.3 | ||||||||||||||||||||
| NsnDosAttackGlobal | 1.3.6.1.4.1.1991.1.1.3.14.3.1 | ||||||||||||||||||||
| SsnDosAttackICMPDropCount | 1.3.6.1.4.1.1991.1.1.3.14.3.1.1 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current ICMP drop counter. | |||||||||||||||||||||
| SsnDosAttackICMPBlockCount | 1.3.6.1.4.1.1991.1.1.3.14.3.1.2 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current ICMP block counter. | |||||||||||||||||||||
| SsnDosAttackSYNDropCount | 1.3.6.1.4.1.1991.1.1.3.14.3.1.3 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current SYN drop counter. | |||||||||||||||||||||
| SsnDosAttackSYNBlockCount | 1.3.6.1.4.1.1991.1.1.3.14.3.1.4 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current SYN block counter. | |||||||||||||||||||||
| TsnDosAttackPortTable | 1.3.6.1.4.1.1991.1.1.3.14.3.2 | NA | |||||||||||||||||||
table · not-accessible · current Denial of service attack port table. | |||||||||||||||||||||
| RsnDosAttackPortEntry | 1.3.6.1.4.1.1991.1.1.3.14.3.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry of the denial of service attack port table.
| |||||||||||||||||||||
| CsnDosAttackPort | 1.3.6.1.4.1.1991.1.1.3.14.3.2.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current ifIndex value of a port. | |||||||||||||||||||||
| CsnDosAttackPortICMPDropCount | 1.3.6.1.4.1.1991.1.1.3.14.3.2.1.2 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current ICMP drop counter. | |||||||||||||||||||||
| CsnDosAttackPortICMPBlockCount | 1.3.6.1.4.1.1991.1.1.3.14.3.2.1.3 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current ICMP block counter. | |||||||||||||||||||||
| CsnDosAttackPortSYNDropCount | 1.3.6.1.4.1.1991.1.1.3.14.3.2.1.4 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current SYN drop counter. | |||||||||||||||||||||
| CsnDosAttackPortSYNBlockCount | 1.3.6.1.4.1.1991.1.1.3.14.3.2.1.5 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current SYN block counter. | |||||||||||||||||||||
| NsnAAA | 1.3.6.1.4.1.1991.1.1.3.15 | ||||||||||||||||||||
| NsnAuthentication | 1.3.6.1.4.1.1991.1.1.3.15.1 | ||||||||||||||||||||
| SsnAuthenticationDot1x | 1.3.6.1.4.1.1991.1.1.3.15.1.1 | OCTET STRING (SIZE (0..3)) | RW | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..3)) · read-write · current A sequence of authentication methods. Each octet represents a method to authorize the user command. Each octet has the following value: radius(2) - authenticate by requesting radius server none(6) - no authentication Setting a zero length octet string invalidates all previous authentication methods. | |||||||||||||||||||||
| SsnAuthenticationEnable | 1.3.6.1.4.1.1991.1.1.3.15.1.2 | OCTET STRING (SIZE (0..3)) | RW | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..3)) · read-write · current A sequence of authentication methods. Each octet represents a method to authorize the user command. Each octet has the following value: enable(1) - Use enable password for authentication radius(2) - authenticate by requesting radius server local(3) - Use local user for authentication line(4) - Use line (telnet) password for authentication tacplus(5) - authenticate by requesting tacplus server none(6) - no authentication tacacs(7) - Use TACACS authentication Setting a zero length octet string invalidates all previous authentication methods. | |||||||||||||||||||||
| SsnAuthenticationLogin | 1.3.6.1.4.1.1991.1.1.3.15.1.3 | OCTET STRING (SIZE (0..3)) | RW | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..3)) · read-write · current A sequence of authentication methods. Each octet represents a method to authorize the user command. Each octet has the following value: enable(1) - Use enable password for authentication radius(2) - authenticate by requesting radius server local(3) - Use local user for authentication line(4) - Use line (telnet) password for authentication tacplus(5) - authenticate by requesting tacplus server none(6) - no authentication tacacs(7) - Use TACACS authentication Setting a zero length octet string invalidates all previous authentication methods. | |||||||||||||||||||||
| SsnAuthenticationSnmpserver | 1.3.6.1.4.1.1991.1.1.3.15.1.4 | OCTET STRING (SIZE (0..3)) | RW | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..3)) · read-write · current A sequence of authentication methods. Each octet represents a method to authorize the user command. Each octet has the following value: enable(1) - Use enable password for authentication local(3) - Use local user for authentication none(6) - no authentication Setting a zero length octet string invalidates all previous authentication methods. | |||||||||||||||||||||
| SsnAuthenticationWebserver | 1.3.6.1.4.1.1991.1.1.3.15.1.5 | OCTET STRING (SIZE (0..3)) | RW | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..3)) · read-write · current A sequence of authentication methods. Each octet represents a method to authorize the user command. Each octet has the following value: enable(1) - Use enable password for authentication radius(2) - authenticate by requesting radius server local(3) - Use local user for authentication line(4) - Use line (telnet) password for authentication tacplus(5) - authenticate by requesting tacplus server none(6) - no authentication tacacs(7) - Use TACACS authentication Setting a zero length octet string invalidates all previous authentication methods. | |||||||||||||||||||||
| NsnAuthorization | 1.3.6.1.4.1.1991.1.1.3.15.2 | ||||||||||||||||||||
| SsnAuthorizationCommandMethods | 1.3.6.1.4.1.1991.1.1.3.15.2.1 | OCTET STRING (SIZE (0..3)) | RW | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..3)) · read-write · current A sequence of authorization methods. Each octet represents a method to authorize the user command. Each octet has the following value: radius(2) - authorize by requesting radius server tacplus(5) - authorize by requesting tacplus server none(6) - skip authorization Setting a zero length octet string invalidates all previous authorization methods. | |||||||||||||||||||||
| SsnAuthorizationCommandLevel | 1.3.6.1.4.1.1991.1.1.3.15.2.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Commands, which are equal to and less than the specified command level here needs to be authorized. Possible enumeration values: 0 - Privilege level 0 4 - Privilege level 4 5 - Privilege level 5.
| |||||||||||||||||||||
| SsnAuthorizationExec | 1.3.6.1.4.1.1991.1.1.3.15.2.3 | OCTET STRING (SIZE (0..3)) | RW | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..3)) · read-write · current A sequence of exec authorization methods. Each octet represents a method for telnet or SSH login authorization. Each octet has the following enumeration value: radius(2) - send exec authorization request to radius server tacplus(5) - send exec authorization request to tacplus server none(6) - no exec authorization Setting a zero length octet string invalidates all authorization methods. | |||||||||||||||||||||
| SsnAuthorizationCoaEnable | 1.3.6.1.4.1.1991.1.1.3.15.2.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current For change of Authorization (COA) enable. Possible enumeration values: 1 - Enable COA 0 - No Enable COA.
| |||||||||||||||||||||
| SsnAuthorizationCoaIgnore | 1.3.6.1.4.1.1991.1.1.3.15.2.5 | OCTET STRING (SIZE (0..5)) | RW | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..5)) · read-write · current For change of Authorization (COA) ignore COA commands. Possible enumeration values: dm-request(1) - Disconnect message request modify-acl(2) - Modify access control list reauth-host(4) - Re-authenticate the host disable-port(8) - Disable the port flip-port(10) - Bounce the port. | |||||||||||||||||||||
| NsnAccounting | 1.3.6.1.4.1.1991.1.1.3.15.3 | ||||||||||||||||||||
| SsnAccountingCommandMethods | 1.3.6.1.4.1.1991.1.1.3.15.3.1 | OCTET STRING (SIZE (0..3)) | RW | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..3)) · read-write · current A sequence of accounting methods. Each octet represents a method to account for the user command. Each octet has the following enumeration value: radius(2) - send accounting info to radius server tacplus(5) - send accounting info to tacplus server none(6) - skip accounting Setting a zero length octet string invalidates all previous accounting methods. | |||||||||||||||||||||
| SsnAccountingCommandLevel | 1.3.6.1.4.1.1991.1.1.3.15.3.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Commands, which are equal to and less than the specified command level here will be accounted. Possible enumeration values: level0 - Privilege level 0 level4 - Privilege level 4 level5 - Privilege level 5.
| |||||||||||||||||||||
| SsnAccountingExec | 1.3.6.1.4.1.1991.1.1.3.15.3.3 | OCTET STRING (SIZE (0..3)) | RW | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..3)) · read-write · current A sequence of accounting methods. Each octet represents a method for telnet or SSH login accounting. Each octet has the following enumeration value: radius(2) - send accounting info to radius server tacplus(5) - send accounting info to tacplus server none(6) - skip accounting Setting a zero length octet string invalidates all previous accounting methods. | |||||||||||||||||||||
| SsnAccountingSystem | 1.3.6.1.4.1.1991.1.1.3.15.3.4 | OCTET STRING (SIZE (0..3)) | RW | ||||||||||||||||||
scalar · OCTET STRING (SIZE (0..3)) · read-write · current A sequence of accounting methods. Each octet represents a method to account for the system related events. Each octet has the following enumeration value: radius(2) - send accounting info to radius server tacplus(5) - send accounting info to tacplus server none(6) - skip accounting Setting a zero length octet string invalidates all previous accounting methods. | |||||||||||||||||||||
| NsnCAR | 1.3.6.1.4.1.1991.1.1.3.16 | ||||||||||||||||||||
| NsnVLanCAR | 1.3.6.1.4.1.1991.1.1.3.17 | ||||||||||||||||||||
| NsnNetFlow | 1.3.6.1.4.1.1991.1.1.3.18 | ||||||||||||||||||||
| NsnNetFlowGlb | 1.3.6.1.4.1.1991.1.1.3.18.1 | ||||||||||||||||||||
| SsnNetFlowGblEnable | 1.3.6.1.4.1.1991.1.1.3.18.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/disable NetFlow export operation.
| |||||||||||||||||||||
| SsnNetFlowGblVersion | 1.3.6.1.4.1.1991.1.1.3.18.1.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current NetFlow export version.
| |||||||||||||||||||||
| SsnNetFlowGblProtocolDisable | 1.3.6.1.4.1.1991.1.1.3.18.1.3 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current bit 0 - other, disable all protocols export except UDP and TCP bit 1 - tcp, disable TCP protocol export bit 2 - udp, disable UDP protocol export | |||||||||||||||||||||
| SsnNetFlowGblActiveTimeout | 1.3.6.1.4.1.1991.1.1.3.18.1.4 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Maximum time an active flow can be in the NetFlow cache (minutes: 1..60) | |||||||||||||||||||||
| SsnNetFlowGblInactiveTimeout | 1.3.6.1.4.1.1991.1.1.3.18.1.5 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Maximum time an inactive flow can be in the NetFlow cache (seconds: 10..600) | |||||||||||||||||||||
| TsnNetFlowCollectorTable | 1.3.6.1.4.1.1991.1.1.3.18.2 | NA | |||||||||||||||||||
table · not-accessible · current A table of each NetFlow collector information. | |||||||||||||||||||||
| RsnNetFlowCollectorEntry | 1.3.6.1.4.1.1991.1.1.3.18.2.1 | NA | |||||||||||||||||||
| CsnNetFlowCollectorIndex | 1.3.6.1.4.1.1991.1.1.3.18.2.1.1 | INTEGER (1..10) | RO | ||||||||||||||||||
column · INTEGER (1..10) · read-only · current The index to the NetFlow collector table. | |||||||||||||||||||||
| CsnNetFlowCollectorIp | 1.3.6.1.4.1.1991.1.1.3.18.2.1.2 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The NetFlow collector ip address. | |||||||||||||||||||||
| CsnNetFlowCollectorUdpPort | 1.3.6.1.4.1.1991.1.1.3.18.2.1.3 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The NetFlow collector UDP port number. | |||||||||||||||||||||
| CsnNetFlowCollectorSourceInterface | 1.3.6.1.4.1.1991.1.1.3.18.2.1.4 | InterfaceIndex | RW | ||||||||||||||||||
column · InterfaceIndex · read-write · current The ifIndex value to specify source port to export NetFlow packet. Value 0 to indicate default outgoing port. | |||||||||||||||||||||
| CsnNetFlowCollectorRowStatus | 1.3.6.1.4.1.1991.1.1.3.18.2.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current To create or delete a NetFlow collector table entry.
| |||||||||||||||||||||
| TsnNetFlowAggregationTable | 1.3.6.1.4.1.1991.1.1.3.18.3 | NA | |||||||||||||||||||
table · not-accessible · current A table of each NetFlow aggregation scheme information. | |||||||||||||||||||||
| RsnNetFlowAggregationEntry | 1.3.6.1.4.1.1991.1.1.3.18.3.1 | NA | |||||||||||||||||||
| CsnNetFlowAggregationIndex | 1.3.6.1.4.1.1991.1.1.3.18.3.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The Aggregation scheme ID
| |||||||||||||||||||||
| CsnNetFlowAggregationIp | 1.3.6.1.4.1.1991.1.1.3.18.3.1.2 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The NetFlow aggregation collector ip address. | |||||||||||||||||||||
| CsnNetFlowAggregationUdpPort | 1.3.6.1.4.1.1991.1.1.3.18.3.1.3 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The NetFlow aggregation collector UDP port number. | |||||||||||||||||||||
| CsnNetFlowAggregationSourceInterface | 1.3.6.1.4.1.1991.1.1.3.18.3.1.4 | InterfaceIndex | RW | ||||||||||||||||||
column · InterfaceIndex · read-write · current The ifIndex value to specify source port to export NetFlow aggregation packet. Value 0 to indicate default outgoing port. | |||||||||||||||||||||
| CsnNetFlowAggregationNumberOfCacheEntries | 1.3.6.1.4.1.1991.1.1.3.18.3.1.5 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Number of cache entries for aggregation scheme | |||||||||||||||||||||
| CsnNetFlowAggregationActiveTimeout | 1.3.6.1.4.1.1991.1.1.3.18.3.1.6 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Maximum time an active flow can be in the aggregation cache | |||||||||||||||||||||
| CsnNetFlowAggregationInactiveTimeout | 1.3.6.1.4.1.1991.1.1.3.18.3.1.7 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Maximum time an inactive flow can be in the aggregation cache | |||||||||||||||||||||
| CsnNetFlowAggregationEnable | 1.3.6.1.4.1.1991.1.1.3.18.3.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable/disable NetFlow aggregation for this aggregation scheme.
| |||||||||||||||||||||
| CsnNetFlowAggregationRowStatus | 1.3.6.1.4.1.1991.1.1.3.18.3.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current To create or delete a NetFlow collector table entry.
| |||||||||||||||||||||
| TsnNetFlowIfTable | 1.3.6.1.4.1.1991.1.1.3.18.4 | NA | |||||||||||||||||||
table · not-accessible · current A list of interface entries. The number of entries is given by the value of ifNumber. | |||||||||||||||||||||
| RsnNetFlowIfEntry | 1.3.6.1.4.1.1991.1.1.3.18.4.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry containing the type of switching performed on that interface.
| |||||||||||||||||||||
| CsnNetFlowIfIndex | 1.3.6.1.4.1.1991.1.1.3.18.4.1.1 | InterfaceIndex | RO | ||||||||||||||||||
column · InterfaceIndex · read-only · current A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. | |||||||||||||||||||||
| CsnNetFlowIfFlowSwitching | 1.3.6.1.4.1.1991.1.1.3.18.4.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current To enable/disable flow switching in a particular interface: disable (0) - no flow switching enable (1) - flow switching
| |||||||||||||||||||||
| NsnSFlow | 1.3.6.1.4.1.1991.1.1.3.19 | ||||||||||||||||||||
| NsnSFlowGlb | 1.3.6.1.4.1.1991.1.1.3.19.1 | ||||||||||||||||||||
| SsnSflowStatus | 1.3.6.1.4.1.1991.1.1.3.19.1.1 | EnabledStatus | RO | ||||||||||||||||||
scalar · EnabledStatus · read-only · current To enable/disable sflow sampling on all the interfaces.
disabled - sflow sampling disabled
enableed - sflow sampling enabled
Unless globally enabled, it can't be enabled on an
interface specifically. | |||||||||||||||||||||
| SsnSflowSampleRate | 1.3.6.1.4.1.1991.1.1.3.19.1.2 | Unsigned32 (256..16777215) | RO | ||||||||||||||||||
scalar · Unsigned32 (256..16777215) · read-only · current To set the rate wt which the packet sampling to happen. A value of 512 means, every 512th packet is simpleed for flow collection. | |||||||||||||||||||||
| SsnSflowSourcePort | 1.3.6.1.4.1.1991.1.1.3.19.1.3 | Unsigned32 (1025..65535) | RO | ||||||||||||||||||
scalar · Unsigned32 (1025..65535) · read-only · current To set the UDP source port for sending the sflow samples to the configured collectors. Any permissible value can be configured for this and default is 8888. | |||||||||||||||||||||
| SsnSflowAgentAddrType | 1.3.6.1.4.1.1991.1.1.3.19.1.4 | InetAddressType | RO | ||||||||||||||||||
scalar · InetAddressType · read-only · current To set the Agent IPv4/IPv6 address type on the switch. Sflow uses the Agent IP address in the samples sent to collector and this address is dynamically determined based on L2/L3 switch, but can be administratively set also. | |||||||||||||||||||||
| SsnSflowAgentAddr | 1.3.6.1.4.1.1991.1.1.3.19.1.5 | InetAddress | RO | ||||||||||||||||||
scalar · InetAddress · read-only · current To set the Agent IPv4/IPv6 address type on the switch. Sflow uses the Agent IP address in the samples sent to collector and this address is dynamically determined based on L2/L3 switch, but can be administratively set also. | |||||||||||||||||||||
| TsnSflowCollectorTable | 1.3.6.1.4.1.1991.1.1.3.19.2 | NA | |||||||||||||||||||
table · not-accessible · current Table of all but first sFlow collectors. The first collector can be configured using sFlowTable in RFC 3176. The RFC cannot be used to configure more than one sFlow collectors. This table has been created to fill this gap. | |||||||||||||||||||||
| RsnSflowCollectorEntry | 1.3.6.1.4.1.1991.1.1.3.19.2.1 | NA | |||||||||||||||||||
| CsnSflowCollectorIndex | 1.3.6.1.4.1.1991.1.1.3.19.2.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The index to the sFlow collector table. | |||||||||||||||||||||
| CsnSflowCollectorIP | 1.3.6.1.4.1.1991.1.1.3.19.2.1.2 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The sFlow collector ip address. | |||||||||||||||||||||
| CsnSflowCollectorUDPPort | 1.3.6.1.4.1.1991.1.1.3.19.2.1.3 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The sFlow collector UDP port number. | |||||||||||||||||||||
| CsnSflowCollectorRowStatus | 1.3.6.1.4.1.1991.1.1.3.19.2.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current To create, update or delete a SFlow collector table entry. If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid
| |||||||||||||||||||||
| NsnFDP | 1.3.6.1.4.1.1991.1.1.3.20 | ||||||||||||||||||||
| NsnFdpMIBObjects | 1.3.6.1.4.1.1991.1.1.3.20.1 | ||||||||||||||||||||
| NsnFdpInterface | 1.3.6.1.4.1.1991.1.1.3.20.1.1 | ||||||||||||||||||||
| TsnFdpInterfaceTable | 1.3.6.1.4.1.1991.1.1.3.20.1.1.1 | NA | |||||||||||||||||||
table · not-accessible · current Status of FDP on the device's interfaces. | |||||||||||||||||||||
| RsnFdpInterfaceEntry | 1.3.6.1.4.1.1991.1.1.3.20.1.1.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the snFdpInterfaceTable, having the status of FDP on an interface. | |||||||||||||||||||||
| CsnFdpInterfaceIfIndex | 1.3.6.1.4.1.1991.1.1.3.20.1.1.1.1.1 | InterfaceIndex | NA | ||||||||||||||||||
column · InterfaceIndex · not-accessible · current ifIndex value of the local interface. | |||||||||||||||||||||
| CsnFdpInterfaceFdpEnable | 1.3.6.1.4.1.1991.1.1.3.20.1.1.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The flag, whether the Ruckus Wireless Discovery Protocol is currently running on this interface. It has no effect when FDP is disabled (snFdpGlobalRun = FALSE).
| |||||||||||||||||||||
| CsnFdpInterfaceCdpEnable | 1.3.6.1.4.1.1991.1.1.3.20.1.1.1.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The flag, whether the Cisco Discovery Protocol is currently running on this interface. It has no effect when CDP is disabled (snCdpGlobalRun = FALSE).
| |||||||||||||||||||||
| NsnFdpCache | 1.3.6.1.4.1.1991.1.1.3.20.1.2 | ||||||||||||||||||||
| TsnFdpCacheTable | 1.3.6.1.4.1.1991.1.1.3.20.1.2.1 | NA | |||||||||||||||||||
table · not-accessible · current The table for the cached information obtained via receiving FDP/CDP messages. | |||||||||||||||||||||
| RsnFdpCacheEntry | 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the snFdpCacheTable, having the information received via FDP/CDP on one interface from one device. Entries appear when a FDP/CDP advertisement is received from a neighbor device. Entries disappear when FDP/CDP is disabled on the interface, or globally. | |||||||||||||||||||||
| CsnFdpCacheIfIndex | 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.1 | InterfaceIndex | NA | ||||||||||||||||||
column · InterfaceIndex · not-accessible · current ifIndex value of the local interface. | |||||||||||||||||||||
| CsnFdpCacheDeviceIndex | 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.2 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Identification of a device, which sent FDP/CDP messages | |||||||||||||||||||||
| CsnFdpCacheDeviceId | 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The Device-ID string as reported in the most recent FDP/CDP message. The zero-length string indicates no Device-ID field (TLV) was reported in the most recent FDP/CDP message. | |||||||||||||||||||||
| CsnFdpCacheAddressType | 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current An indication of the type of address contained in the corresponding instance of snFdpCacheAddress.
| |||||||||||||||||||||
| CsnFdpCacheAddress | 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.5 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The (first) network-layer address of the device as reported in the most recent FDP/CDP message in the following format: IP address: 4 octets, ip(1) IPX address: 10 octets, ipx(2) First 4-octet as the network number Second 6-octet as the host number Appletalk address: 3 octets, appletalk(3) First 2-octet as the network number Second 1-octet as the host number | |||||||||||||||||||||
| CsnFdpCacheVersion | 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Version string as reported in the most recent FDP/CDP message. | |||||||||||||||||||||
| CsnFdpCacheDevicePort | 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.7 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The Port-ID string as reported in the most recent FDP/CDP message. This will typically be the value of the ifName object (e.g., Ethernet0). The zero-length string indicates no Port-ID field (TLV) was reported in the most recent FDP/CDP message. | |||||||||||||||||||||
| CsnFdpCachePlatform | 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.8 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The Device's Hardware Platform as reported in the most recent FDP/CDP message. The zero-length string indicates that no Platform field (TLV) was reported in the most recent FDP/CDP message. | |||||||||||||||||||||
| CsnFdpCacheCapabilities | 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.9 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The Device's Functional Capabilities as reported in the most recent FDP/CDP message. | |||||||||||||||||||||
| CsnFdpCacheVendorId | 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates the entry received by either FDP or CDP.
| |||||||||||||||||||||
| CsnFdpCacheIsAggregateVlan | 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Neighbor device is in aggregated-vlan.
| |||||||||||||||||||||
| CsnFdpCacheTagType | 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.12 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Neighbor device tag-type. | |||||||||||||||||||||
| CsnFdpCachePortVlanMask | 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.13 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current Neighbor device port VLAN masks in 512-byte octet string. | |||||||||||||||||||||
| CsnFdpCachePortTagMode | 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.14 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Neighbor device port tag mode. Dual(3) mode not supported from FI 08.0.80 release. This object will return 0 for dual(3) Mode.
| |||||||||||||||||||||
| CsnFdpCacheDefaultTrafficeVlanIdForDualMode | 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.15 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated This object return 0 due to no support for this object from FI 08.0.80 release. | |||||||||||||||||||||
| NsnFdpGlobal | 1.3.6.1.4.1.1991.1.1.3.20.1.3 | ||||||||||||||||||||
| SsnFdpGlobalRun | 1.3.6.1.4.1.1991.1.1.3.20.1.3.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The flag, whether the Ruckus Wireless Discovery Protocol is currently running. FDP entries in snFdpCacheTable are deleted when FDP is disabled.
| |||||||||||||||||||||
| SsnFdpGlobalMessageInterval | 1.3.6.1.4.1.1991.1.1.3.20.1.3.2 | INTEGER (5..900) | RW | ||||||||||||||||||
scalar · INTEGER (5..900) · read-write · current The interval at which FDP messages are to be generated. The default value is 60 seconds. | |||||||||||||||||||||
| SsnFdpGlobalHoldTime | 1.3.6.1.4.1.1991.1.1.3.20.1.3.3 | INTEGER (10..255) | RW | ||||||||||||||||||
scalar · INTEGER (10..255) · read-write · current The time for the receiving device holds FDP message. The default value is 180 seconds. | |||||||||||||||||||||
| SsnFdpGlobalCdpRun | 1.3.6.1.4.1.1991.1.1.3.20.1.3.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current An indication of whether the Cisco Discovery Protocol is currently running. CDP entries in snFdpCacheTable are deleted when CDP is disabled.
| |||||||||||||||||||||
| NsnFdpCachedAddr | 1.3.6.1.4.1.1991.1.1.3.20.1.4 | ||||||||||||||||||||
| TsnFdpCachedAddressTable | 1.3.6.1.4.1.1991.1.1.3.20.1.4.1 | NA | |||||||||||||||||||
table · not-accessible · current Cached address table from receiving FDP/CDP messages. | |||||||||||||||||||||
| RsnFdpCachedAddressEntry | 1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry (conceptual row) in the snFdpCacheAddressTable, containing one cached address from FDP/CDP messages. | |||||||||||||||||||||
| CsnFdpCachedAddrIfIndex | 1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1.1 | InterfaceIndex | NA | ||||||||||||||||||
column · InterfaceIndex · not-accessible · current The ifIndex value of the local interface. | |||||||||||||||||||||
| CsnFdpCachedAddrDeviceIndex | 1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1.2 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current A unique vlaue for each device from which FDP/CDP messages are being received. | |||||||||||||||||||||
| CsnFdpCachedAddrDeviceAddrEntryIndex | 1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1.3 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current A unique vlaue for address entry in device from which FDP/CDP messages are being received. | |||||||||||||||||||||
| CsnFdpCachedAddrType | 1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current An indication of the type of address contained in the corresponding instance of snFdpCacheAddrValue.
| |||||||||||||||||||||
| CsnFdpCachedAddrValue | 1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1.5 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The network-layer address of the device SNMP-agent as reported in the most recent FDP/CDP message in the following format: IP address: 4 octets, ip(1) IPX address: 10 octets, ipx(2) First 4-octet as the network number Second 6-octet as the host number Appletalk address: 3 octets, appletalk(3) First 2-octet as the network number Second 1-octet as the host number | |||||||||||||||||||||
| NsnVsrp | 1.3.6.1.4.1.1991.1.1.3.21 | ||||||||||||||||||||
| NsnArpInfo | 1.3.6.1.4.1.1991.1.1.3.22 | ||||||||||||||||||||
| NsnWireless | 1.3.6.1.4.1.1991.1.1.3.23 | ||||||||||||||||||||
| NsnMac | 1.3.6.1.4.1.1991.1.1.3.24 | ||||||||||||||||||||
| NsnMacSecurity | 1.3.6.1.4.1.1991.1.1.3.24.1 | ||||||||||||||||||||
| NsnPortMacSecurity | 1.3.6.1.4.1.1991.1.1.3.24.1.1 | ||||||||||||||||||||
| TsnPortMacSecurityTable | 1.3.6.1.4.1.1991.1.1.3.24.1.1.1 | NA | |||||||||||||||||||
table · not-accessible · current Status of port MAC security on the device's interfaces. | |||||||||||||||||||||
| RsnPortMacSecurityEntry | 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the snPortMacSecurityTable | |||||||||||||||||||||
| CsnPortMacSecurityIfIndex | 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current ifIndex value of the local Ethernet interface on which MAC security is configured. | |||||||||||||||||||||
| CsnPortMacSecurityResource | 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The MAC address was secured using local or shared resources.
| |||||||||||||||||||||
| CsnPortMacSecurityQueryIndex | 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Entry index within the given resource of local Ethernet interface on which MAC security is configured. | |||||||||||||||||||||
| CsnPortMacSecurityMAC | 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.4 | MacAddress | RO | ||||||||||||||||||
column · MacAddress · read-only · current The secure MAC address for this interface. | |||||||||||||||||||||
| CsnPortMacSecurityAgeLeft | 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.5 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of minutes the MAC address will remain secure before being aged out. 0 means no aging. | |||||||||||||||||||||
| CsnPortMacSecurityShutdownStatus | 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Interface up/down status.
| |||||||||||||||||||||
| CsnPortMacSecurityShutdownTimeLeft | 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.7 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current If snPortMacSecurityShutdownStatus is up(1), this value will be 0. If snPortMacSecurityShutdownStatus is down(2), this gives the number of seconds before this interface is enabled again. In the later case, 0 means interface is permanently down. | |||||||||||||||||||||
| CsnPortMacSecurityVlanId | 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.8 | Unsigned32 (1..65535) | RO | ||||||||||||||||||
column · Unsigned32 (1..65535) · read-only · current The vlan membership of this interface. | |||||||||||||||||||||
| TsnPortMacSecurityModuleStatTable | 1.3.6.1.4.1.1991.1.1.3.24.1.1.2 | NA | |||||||||||||||||||
table · not-accessible · current Port MAC security statistics on each module. | |||||||||||||||||||||
| RsnPortMacSecurityModuleStatEntry | 1.3.6.1.4.1.1991.1.1.3.24.1.1.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the snPortMacSecurityModuleStatTable | |||||||||||||||||||||
| CsnPortMacSecurityModuleStatSlotNum | 1.3.6.1.4.1.1991.1.1.3.24.1.1.2.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The slot number of the port security device module. | |||||||||||||||||||||
| CsnPortMacSecurityModuleStatTotalSecurityPorts | 1.3.6.1.4.1.1991.1.1.3.24.1.1.2.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The totol number of Ethernet interfaces on which MAC security is configured in this module. | |||||||||||||||||||||
| CsnPortMacSecurityModuleStatTotalMACs | 1.3.6.1.4.1.1991.1.1.3.24.1.1.2.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The totol number of port MAC security MAC addresses are learned or configured in this module. | |||||||||||||||||||||
| CsnPortMacSecurityModuleStatViolationCounts | 1.3.6.1.4.1.1991.1.1.3.24.1.1.2.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The totol number of counts of violation are collected in this module. | |||||||||||||||||||||
| CsnPortMacSecurityModuleStatTotalShutdownPorts | 1.3.6.1.4.1.1991.1.1.3.24.1.1.2.1.5 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The totol number of Ethernet interfaces are shutted down due to security violation in this module. | |||||||||||||||||||||
| TsnPortMacSecurityIntfContentTable | 1.3.6.1.4.1.1991.1.1.3.24.1.1.3 | NA | |||||||||||||||||||
table · not-accessible · current Port MAC security statistics on each Ethernet Interface. | |||||||||||||||||||||
| RsnPortMacSecurityIntfContentEntry | 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the snPortMacSecurityIntfContentTable | |||||||||||||||||||||
| CsnPortMacSecurityIntfContentIfIndex | 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.1 | InterfaceIndex | NA | ||||||||||||||||||
column · InterfaceIndex · not-accessible · current In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 2863. | |||||||||||||||||||||
| CsnPortMacSecurityIntfContentSecurity | 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Port security for this interface can be either disabled or enabled.
| |||||||||||||||||||||
| CsnPortMacSecurityIntfContentViolationType | 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Port security violation type for this interface is shutdown or restrict.
| |||||||||||||||||||||
| CsnPortMacSecurityIntfContentShutdownTime | 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.4 | Unsigned32 (0..1440) | RW | ||||||||||||||||||
column · Unsigned32 (0..1440) · read-write · current If snPortMacSecurityIntfContentViolationType is shutdown(1), this value gives the number of seconds this interface is shut down when violation occurs. In the shutdown(1) case, 0 means interface is permanently down. If snPortMacSecurityIntfContentViolationType is restrict(2), this value will be always 0. | |||||||||||||||||||||
| CsnPortMacSecurityIntfContentShutdownTimeLeft | 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.5 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current If snPortMacSecurityIntfContentViolationType is shutdown(1), whether this interface has been shut down due to a security violation and the value gives the number of seconds before this interface is enabled again. If snPortMacSecurityIntfContentViolationType is restrict(2), this value will be always 0. | |||||||||||||||||||||
| CsnPortMacSecurityIntfContentAgeOutTime | 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.6 | Unsigned32 (0..1440) | RW | ||||||||||||||||||
column · Unsigned32 (0..1440) · read-write · current The amount of time, in minutes, MAC addresses learned on this interface will remain secure. It allows configurable values 0-1440. 0 means no aging permanently. | |||||||||||||||||||||
| CsnPortMacSecurityIntfContentMaxLockedMacAllowed | 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.7 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current Maximum number of security MAC addresses can be locked to this interface. | |||||||||||||||||||||
| CsnPortMacSecurityIntfContentTotalMACs | 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.8 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The totol number of port MAC security MAC addresses are locked in this interface. | |||||||||||||||||||||
| CsnPortMacSecurityIntfContentViolationCounts | 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.9 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The totol number of counts of violation are collected in this interface. | |||||||||||||||||||||
| TsnPortMacSecurityIntfMacTable | 1.3.6.1.4.1.1991.1.1.3.24.1.1.4 | NA | |||||||||||||||||||
table · not-accessible · current Status of port MAC security on the device's interfaces. | |||||||||||||||||||||
| RsnPortMacSecurityIntfMacEntry | 1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the snPortMacSecurityIntfMacTable | |||||||||||||||||||||
| CsnPortMacSecurityIntfMacIfIndex | 1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current ifIndex value of the local Ethernet interface on which MAC security is configured. | |||||||||||||||||||||
| CsnPortMacSecurityIntfMacAddress | 1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1.2 | MacAddress | RO | ||||||||||||||||||
column · MacAddress · read-only · current The secure MAC address for this local Ethernet interface on which the secure MAC Address is configured and/or learned. The maximum number of the secure MAC Addresses is restricted by the snPortMacSecurityIntfContentMaxLockedMacAllowed. | |||||||||||||||||||||
| CsnPortMacSecurityIntfMacVlanId | 1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1.3 | Unsigned32 (0..65535) | RW | ||||||||||||||||||
column · Unsigned32 (0..65535) · read-write · current The vlan membership of this interface, zero means don't care. | |||||||||||||||||||||
| CsnPortMacSecurityIntfMacRowStatus | 1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid
| |||||||||||||||||||||
| TsnPortMacSecurityAutosaveMacTable | 1.3.6.1.4.1.1991.1.1.3.24.1.1.5 | NA | |||||||||||||||||||
table · not-accessible · current Autosave MAC addresses of port MAC security on the device's interfaces. | |||||||||||||||||||||
| RsnPortMacSecurityAutosaveMacEntry | 1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the snPortMacSecurityAutosaveMacTable | |||||||||||||||||||||
| CsnPortMacSecurityAutosaveMacIfIndex | 1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current ifIndex value of the local Ethernet interface on which MAC security is configured. | |||||||||||||||||||||
| CsnPortMacSecurityAutosaveMacResource | 1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The MAC address was autosaved using local or shared resources.
| |||||||||||||||||||||
| CsnPortMacSecurityAutosaveMacQueryIndex | 1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Entry index within the given resource of local Ethernet interface on which MAC security is autosaved. | |||||||||||||||||||||
| CsnPortMacSecurityAutosaveMacAddress | 1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1.4 | MacAddress | RO | ||||||||||||||||||
column · MacAddress · read-only · current The secure MAC address for this local Ethernet interface on which the secure MAC Address is autosaved. | |||||||||||||||||||||
| NsnPortMacGlobalSecurity | 1.3.6.1.4.1.1991.1.1.3.24.1.2 | ||||||||||||||||||||
| SsnPortMacGlobalSecurityFeature | 1.3.6.1.4.1.1991.1.1.3.24.1.2.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Port security for this device can be either disabled or enabled.
| |||||||||||||||||||||
| SsnPortMacGlobalSecurityAgeOutTime | 1.3.6.1.4.1.1991.1.1.3.24.1.2.2 | Unsigned32 (0..1440) | RW | ||||||||||||||||||
scalar · Unsigned32 (0..1440) · read-write · current The amount of time, in minutes, MAC addresses learned on this device will remain secure. It allows configurable values in the range of 0-1440. 0 means no aging permanently. | |||||||||||||||||||||
| SsnPortMacGlobalSecurityAutosave | 1.3.6.1.4.1.1991.1.1.3.24.1.2.3 | Unsigned32 | RW | ||||||||||||||||||
scalar · Unsigned32 · read-write · current The port security autosave value for this device. It allows configurable values 0 and also in the range of 15-1440. The value 0 means no autosave. | |||||||||||||||||||||
| NsnPortMonitor | 1.3.6.1.4.1.1991.1.1.3.25 | ||||||||||||||||||||
| TsnPortMonitorTable | 1.3.6.1.4.1.1991.1.1.3.25.1 | NA | |||||||||||||||||||
table · not-accessible · current Status of port monitoring on the device's interfaces. | |||||||||||||||||||||
| RsnPortMonitorEntry | 1.3.6.1.4.1.1991.1.1.3.25.1.1 | NA | |||||||||||||||||||
| CsnPortMonitorIfIndex | 1.3.6.1.4.1.1991.1.1.3.25.1.1.1 | InterfaceIndex | NA | ||||||||||||||||||
column · InterfaceIndex · not-accessible · current ifIndex value of the local interface on which monitoring is configuerd. | |||||||||||||||||||||
| CsnPortMonitorMirrorList | 1.3.6.1.4.1.1991.1.1.3.25.1.1.2 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current Lists the monitoring configuration of this port. The value is a space delimited sequence of ifIndex of mirror port and monitor mode. The values for mode can be - 0 - off, 1 - input, 2 - output, 3 - both Eg. '65 2 66 1' means send the output traffic to port 2/1 and input traffic to port 2/2. To turn off a mirror use monitor mode of 0 (off) in the list. | |||||||||||||||||||||
| NsnSSH | 1.3.6.1.4.1.1991.1.1.3.26 | ||||||||||||||||||||
| NsnSSL | 1.3.6.1.4.1.1991.1.1.3.27 | ||||||||||||||||||||
| NsnMacAuth | 1.3.6.1.4.1.1991.1.1.3.28 | ||||||||||||||||||||
| NsnMetroRing | 1.3.6.1.4.1.1991.1.1.3.29 | ||||||||||||||||||||
| NsnStacking | 1.3.6.1.4.1.1991.1.1.3.31 | ||||||||||||||||||||
| NfdryMacVlanMIB | 1.3.6.1.4.1.1991.1.1.3.32 | ||||||||||||||||||||
| NfdryLinkAggregationGroupMIB | 1.3.6.1.4.1.1991.1.1.3.33 | ||||||||||||||||||||
| NfdryDns2MIB | 1.3.6.1.4.1.1991.1.1.3.34 | ||||||||||||||||||||
| NfdryDaiMIB | 1.3.6.1.4.1.1991.1.1.3.35 | ||||||||||||||||||||
| NfdryDhcpSnoopMIB | 1.3.6.1.4.1.1991.1.1.3.36 | ||||||||||||||||||||
| NfdryIpSrcGuardMIB | 1.3.6.1.4.1.1991.1.1.3.37 | ||||||||||||||||||||
| NbrcdRouteMap | 1.3.6.1.4.1.1991.1.1.3.39 | ||||||||||||||||||||
| NbrcdSPXMIB | 1.3.6.1.4.1.1991.1.1.3.40 | ||||||||||||||||||||
| NbrcdStackISSUMIB | 1.3.6.1.4.1.1991.1.1.3.41 | ||||||||||||||||||||
| NruckusWiredClientMIB | 1.3.6.1.4.1.1991.1.1.3.43 | ||||||||||||||||||||
| NruckusDhcpClientMIB | 1.3.6.1.4.1.1991.1.1.3.46 | ||||||||||||||||||||
Textual conventions
BrcdVlanIdOrNoneTCInteger32 (0 | 1..4090)Display hint:
dThe VLAN-ID that uniquely identifies a specific VLAN or to no VLAN.
BrcdVlanIdTCInteger32 (1..4090)Display hint:
dThe VLAN-ID that uniquely identifies a specific VLAN.
BridgeIdOCTET STRING (SIZE (8))the Bridge-Identifier as used in the Spanning Tree
FdryVlanIdOrNoneTCInteger32 (0 | 1..4094)Display hint:
dThe VLAN-ID that uniquely identifies a specific VLAN, or no VLAN. The special value of zero is used to indicate that no VLAN-ID is present or used. This can be used in any situation where an object or a table entry must refer either to a specific VLAN, or to no VLAN. Note that a MIB object that is defined using this TEXTUAL-CONVENTION should clarify the meaning of 'no VLAN' (i.e., the special value 0).
InterfaceIdOBJECT IDENTIFIER-- This data type is used to specify an interface ID. -- The first object identifier is port type, and the -- format of the rest of the object identifiers depend -- on the port type. -- -- ethernet(1), format: type.slot.port -- e.g. 1.3.6 is port ethernet 3/6 -- -- pos(2), format: type.slot.port -- e.g. 2.10.1 is port pos 10/1 -- -- atm(3), format: type.slot.port -- e.g. 3.8.2 is port atm 8/2 -- -- virtual router interface(4), format: type.ve -- e.g. 4.9 is port ve 9 -- -- loopback(5), format: type.lb -- e.g. 5.7 is port loopback 7 -- -- gre tunnel(6), format: type.tn, not supported -- -- subinterface(7), format: type.slot.port.subInterface -- e.g. 7.3.2.4 is port atm 3/2.4 -- -- mpls tunnel(8), format: type.tn -- e.g. 8.3 is port tunnel 3 -- -- pvc(9), format: type.slot.port.subInterface.vpi.vci -- e.g. 9.3.1.2.1.2 is port atm 3/1.2.1.2 -- -- management(10), format: type.slot.port -- e.g. 10.17.1 is port management 17/1 -- -- tunnel(11), format: type.trunkid -- e.g. 11.3 is trunk id 3 -- -- virtual management(12), format: type -- e.g. 10 is the virtual management interface
InterfaceId2OBJECT IDENTIFIER-- This data type is used to specify an interface ID. The -- first object identifier is port type, and the format of -- the rest of the object identifiers depend on the port -- type. Note that for types which include a reference to a -- physical port, the formats vary according to the type of -- port identifiers that the device uses (e.g. 6, 3/6, or -- 2/3/6). New port type values will be added in the future -- as needed. For a given type code, new formats may also -- be added in the future. Each format for a given type -- code will have a unique length. Applications should -- check the OID length and not assume that it will match -- one of the currently defined formats. -- -- Though the OIDs are shown here in a shortened form, the -- actual OIDs are prefixed with the OID of snInterfaceId -- (so the OID for 1.2.3.6 would actually be -- snInterfaceId.1.2.3.6, which is equivalent to -- snEthernetInterface.2.3.6.). -- -- ethernet(1), formats: -- type.port (e.g. 1.6 is port ethernet 6) -- type.slot.port (e.g. 1.3.6 is port ethernet 3/6) -- type.unit.slot.port (e.g. 1.2.3.6 is port ethernet 2/3/6) -- -- pos(2), formats: -- type.port (e.g. 2.6 is port pos 6) -- type.slot.port (e.g. 2.3.6 is port pos 3/6) -- type.unit.slot.port (e.g. 2.2.3.6 is port pos 2/3/6) -- -- atm(3), format: type.slot.port -- type.port (e.g. 3.6 is port atm 6) -- type.slot.port (e.g. 3.3.6 is port atm 3/6) -- type.unit.slot.port (e.g. 3.2.3.6 is port atm 2/3/6) -- -- virtual router interface(4), format: type.ve -- e.g. 4.9 is port ve 9 -- -- loopback(5), format: type.lb -- e.g. 5.7 is port loopback 7 -- -- gre tunnel(6), format: type.tn, not supported -- -- subinterface(7), formats: -- type.port.subInterface (e.g. 7.6.4 is port atm 6.4) -- type.slot.port.subInterface (e.g. 7.3.6.4 is port atm 3/6.4) -- type.unit.slot.port.subInterface -- (e.g. 7.2.3.6.4 is port atm 2/3/6.4) -- -- mpls tunnel(8), format: type.tn -- e.g. 8.3 is port tunnel 3 -- -- pvc(9), formats: -- type.port.subInterface.vpi.vci -- (e.g. 9.6.2.1.2 is port atm 6.2.1.2) -- type.slot.port.subInterface.vpi.vci -- (e.g. 9.3.6.2.1.2 is port atm 3/6.2.1.2) -- type.unit.slot.port.subInterface.vpi.vci -- (e.g. 9.2.3.6.2.1.2 is port atm 2/3/6.2.1.2) -- -- management(10), formats: -- type.port (e.g. 10.1 is port management 1) -- type.slot.port (e.g. 10.2.1 is port management 2/1) -- type.unit.slot.port (e.g. 10.4.2.1 is port management 4/2/1) -- -- trunk(11), format: type.trunkid -- e.g. 11.3 is trunk id 3 -- -- virtual management(12), format: type -- e.g. 12 is the virtual management interface
PhysAddressOCTET STRINGThis data type is used to model media addresses. For many types of media, this will be in a binary representation. For example, an ethernet address would be represented as a string of 6 octets.
PortMaskInteger32This data type is used to model port bitmask. The maximum of ports are 32.
PortQosTCINTEGERinvalid(127)level0(0)level1(1)level2(2)level3(3)level4(4)level5(5)level6(6)level7(7)The port QOS Priority hardware queue. 0 is lowest priority, 7 is the highest.
TimeoutInteger32a STP timer in units of 1/100 seconds
VlanTagModeINTEGERdual(3)tagged(1)untagged(2)Vlan tag mode for a given vlan member.