FOUNDRY-SN-STACKING-MIB
Brocade Communication Systems, Inc. (formerly 'Foundry Networks, Inc.')Management Information for stacking system configuration and operational status. Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
snmptranslate -m FOUNDRY-SN-STACKING-MIB -Tpsnmpwalk -v2c -c <community> -m FOUNDRY-SN-STACKING-MIB <host> 1.3.6.1.4.1.1991.1.1.3.31Imports
| FOUNDRY-SN-AGENT-MIB | DisplayString |
|---|---|
| FOUNDRY-SN-SWITCH-GROUP-MIB | snSwitch |
| IF-MIB | InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IsnStacking | 1.3.6.1.4.1.1991.1.1.3.31 | ||||||||||||
identity Management Information for stacking system configuration and operational status. Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | |||||||||||||
| NsnStackingGlobalObjects | 1.3.6.1.4.1.1991.1.1.3.31.1 | ||||||||||||
| SsnStackingGlobalConfigState | 1.3.6.1.4.1.1991.1.1.3.31.1.1 | INTEGER | RW | enabled(1) | |||||||||
scalar · INTEGER · read-write · current Configure stack state for stacking feature on the global level. none: neutral, receive packets only enable: stacking is enable, send and receive packets disable: stacking is disable, No send and receive packets
Example values from LibreNMS test devices
| |||||||||||||
| SsnStackingGlobalMacAddress | 1.3.6.1.4.1.1991.1.1.3.31.1.2 | MacAddress | RW | ||||||||||
scalar · MacAddress · read-write · current Management MAC address of the stacking system. This is available to change management MAC address of stack for administrative purpose. It is strongly recommended that this command should be used with upmost caution to prevent duplicate MAC address and must reboot the system to take an effect. It is mutually exclusive from enabling the persistent MAC timer. Enter zero MAC address to remove the configured MAC address | |||||||||||||
| SsnStackingGlobalPersistentMacTimerState | 1.3.6.1.4.1.1991.1.1.3.31.1.3 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated Configure persistent MAC timer state for stacking feature on the global level. enable: the persistent MAC timer is active and configured. The persistent MAC timer is set as the default timer (60 minutes) disable: deactivate the persistent MAC timer. It will stop the use of persistent MAC address and use new active stack unit's base MAC address
| |||||||||||||
| SsnStackingGlobalPersistentMacTimer | 1.3.6.1.4.1.1991.1.1.3.31.1.4 | Integer32 | RW | deprecated | |||||||||
scalar · Integer32 · read-write · deprecated Persistent MAC timer in minutes for the stacking system Number of minutes to retain original active stack unit's base MAC address in event of active unit crash or removal. This timer is triggered when new active unit is elected. When timer expires, new active unit will change stacking MAC to its own base MAC address and advertise its own base MAC address to management VLAN to update the ARP table of peers. If you decide to use new active unit's MAC address, one must enter this timer again to reactivate the persistent MAC. 0 - keep it forever. 5 to 6000 - valid value range. 60 - default value. | |||||||||||||
| SsnStackingGlobalTopology | 1.3.6.1.4.1.1991.1.1.3.31.1.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The topology of the stacking system
| |||||||||||||
| SsnStackingGlobalMode | 1.3.6.1.4.1.1991.1.1.3.31.1.6 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The stacking mode of the system. stackingMode: the system has been installed STK EEPROM, and it is in stacking mode. nonStackingMode:the system has not been installed STK EEPROM, and it is not in stacking mode.
| |||||||||||||
| SsnStackingGlobalMixedMode | 1.3.6.1.4.1.1991.1.1.3.31.1.7 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The mixed stacking mode of the system. mixedStackingMode: the system is in a mixed stacking mode (heterogeneous stacking). classicStackingMode: the system is not in a mixed stacking mode (homogeneous stacking).
| |||||||||||||
| SsnStackingGlobalMaxUnitNumber | 1.3.6.1.4.1.1991.1.1.3.31.1.8 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The max number of units in the stacking system. 1 as default value for no-stacking device | |||||||||||||
| SsnStackingGlobalHighestPriority | 1.3.6.1.4.1.1991.1.1.3.31.1.9 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The highest stack priority that can be configured in the stacking system. 0 as default value for no-stacking device | |||||||||||||
| SsnStackingGlobalZeroTouchEnable | 1.3.6.1.4.1.1991.1.1.3.31.1.10 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configure Stack Zero Touch feature for a stacking system on the global level. The Zero Touch feature discovers new stack member units, assigns them IDs, defines stack-port/trunk, and allows member unit to join the stacking system. none: neutral state, receive packets only enabled: Stack Zero touch feature is enabled The none state will be displayed if stacking is not enabled. The default state is none
| |||||||||||||
| NsnStackingTableObjects | 1.3.6.1.4.1.1991.1.1.3.31.2 | ||||||||||||
| TsnStackingConfigUnitTable | 1.3.6.1.4.1.1991.1.1.3.31.2.1 | NA | |||||||||||
table · not-accessible · current Stacking configuration unit table. | |||||||||||||
| RsnStackingConfigUnitEntry | 1.3.6.1.4.1.1991.1.1.3.31.2.1.1 | NA | |||||||||||
row · not-accessible · current An entry in the stacking configuration table. | |||||||||||||
| CsnStackingConfigUnitIndex | 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The stacking unit Id | |||||||||||||
| CsnStackingConfigUnitPriority | 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.2 | Integer32 (0..255) | RW | ||||||||||
column · Integer32 (0..255) · read-write · current The priority in Active/backup eclection. | |||||||||||||
| CsnStackingConfigUnitConfigStackPort | 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.3 | InterfaceIndexOrZero | RW | deprecated | |||||||||
column · InterfaceIndexOrZero · read-write · deprecated The IfIndex for the configured stacking port. If no stacking port is configured, it will be displayed zero and the first two 10G ports as the default stacking ports. Enter zero to remove the configured stacking port. Note that this object is deprecated from FI8090 because the default ports are no longer supported. Use snStackingConfigUnitStackPort1 or snStackingConfigUnitStackPort2 for stack ports. Thus, the value of this object is one of stack port or zero for backup capability. | |||||||||||||
| CsnStackingConfigUnitRowStatus | 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row If the row exists, then a SET with value of create(4) returns error 'wrongValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuchName...no such row other(1).....some other cases valid(2)....the row exists and is valid
| |||||||||||||
| CsnStackingConfigUnitType | 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.5 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current A description of the configured/active system type for each unit. | |||||||||||||
| CsnStackingConfigUnitState | 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current A state for each unit
| |||||||||||||
| CsnStackingConfigUnitStackPort1 | 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.7 | InterfaceIndexOrZero | RW | ||||||||||
column · InterfaceIndexOrZero · read-write · current A stack port for the unit. It returns 0 if stack port does not exist. Entering 0 means to delete this stack port. Note that the maximum stack port on an unit is 2. | |||||||||||||
| CsnStackingConfigUnitStackPort2 | 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.8 | InterfaceIndexOrZero | RW | ||||||||||
column · InterfaceIndexOrZero · read-write · current Other one stack port for the unit. It returns 0 if stack port does not exist. Entering 0 means to delete this stack port. Note that the maximum stack port on an unit is 2. | |||||||||||||
| CsnStackingConfigUnitConnectPort1 | 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.9 | InterfaceIndexOrZero | RW | deprecated | |||||||||
column · InterfaceIndexOrZero · read-write · deprecated First connect port for a peripheral unit in a mixed stacking system. A peripheral unit can have up to two connect ports that is is conected to. They are suggested neighbor linking ports. Thus, they could be code units' periport/trunk or peripheral units' stacking port. It returns 0 if connect port does not exist. Note that this object is deprecated from FI8090. | |||||||||||||
| CsnStackingConfigUnitConnectPort2 | 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.10 | InterfaceIndexOrZero | RW | deprecated | |||||||||
column · InterfaceIndexOrZero · read-write · deprecated second connect port for a peripheral unit in a mixed stacking system. A peripheral unit can have up to two connect ports that is is conected to. They are suggested neighbor linking ports. Thus, they could be code units' periport/trunk or peripheral units' stacking port. It returns 0 if connect port does not exist. Note that this object is deprecated from FI8090. | |||||||||||||
| CsnStackingConfigUnitStackTrunk1 | 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.11 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current A list of interface indices which are the port membership
of a stack trunk on unit. Each interface index is a 32-bit integer
in big endian order. It returns NULL if stack trunk does not exist.
Entering empty octet string means to delete this stack trunk.
Note that the maximum stack trunk on an unit is 2. Each stack trunk
contains up to 16 ports. | |||||||||||||
| CsnStackingConfigUnitStackTrunk2 | 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.12 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current A list of interface indices which are the port membership
of a stack trunk on unit. Each interface index is a 32-bit integer
in big endian order. It returns NULL if stack trunk does not exist.
Entering empty octet string means to delete this stack trunk.
Note that the maximum stack trunk on an unit is 2. Each stack trunk
contains up to 16 ports. | |||||||||||||
| CsnStackingConfigUnitName | 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.13 | DisplayString (SIZE (0..64)) | RW | ||||||||||
column · DisplayString (SIZE (0..64)) · read-write · current A name description of stacking unit. | |||||||||||||
| TsnStackingOperUnitTable | 1.3.6.1.4.1.1991.1.1.3.31.2.2 | NA | |||||||||||
table · not-accessible · current Stacking operation unit table. | |||||||||||||
| RsnStackingOperUnitEntry | 1.3.6.1.4.1.1991.1.1.3.31.2.2.1 | NA | |||||||||||
| CsnStackingOperUnitIndex | 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The stacking unit Id | |||||||||||||
| CsnStackingOperUnitRole | 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.2 | INTEGER | RO | active(2) | |||||||||
| CsnStackingOperUnitMac | 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.3 | MacAddress | RO | cc:4e:24:d6:f6:c0 | |||||||||
| CsnStackingOperUnitPriority | 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.4 | Integer32 (0..255) | RO | 128 | |||||||||
| CsnStackingOperUnitState | 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.5 | INTEGER | RO | local(1) | |||||||||
| CsnStackingOperUnitDescription | 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.6 | DisplayString (SIZE (0..128)) | RO | Ready | |||||||||
column · DisplayString (SIZE (0..128)) · read-only · current Describes the stacking state for each unit. Example values from LibreNMS test devices
| |||||||||||||
| CsnStackingOperUnitStackPort1 | 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.7 | InterfaceIndexOrZero | RO | 0 | |||||||||
column · InterfaceIndexOrZero · read-only · current First stack port for each unit. It returns 0 if stack port does not exist. Example values from LibreNMS test devices
| |||||||||||||
| CsnStackingOperUnitStackPort1State | 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.8 | INTEGER | RO | other(1) | |||||||||
column · INTEGER · read-only · current The first stack port state for each unit.
Example values from LibreNMS test devices
| |||||||||||||
| CsnStackingOperUnitStackPort2 | 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.9 | InterfaceIndexOrZero | RO | 67 | |||||||||
| CsnStackingOperUnitStackPort2State | 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.10 | INTEGER | RO | up(2) | |||||||||
column · INTEGER · read-only · current The second stack port state for each unit.
Example values from LibreNMS test devices
| |||||||||||||
| CsnStackingOperUnitNeighbor1 | 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.11 | Integer32 | RO | 0 | |||||||||
column · Integer32 · read-only · current Stacking neighbor unit (left) number. If there is no neighbor unit, then it returns 0. Example values from LibreNMS test devices
| |||||||||||||
| CsnStackingOperUnitNeighbor2 | 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.12 | Integer32 | RO | 2 | |||||||||
| CsnStackingOperUnitImgVer | 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.13 | DisplayString (SIZE (0..32)) | RO | 08.0.30tT311 | |||||||||
column · DisplayString (SIZE (0..32)) · read-only · current The version of the running software image Example values from LibreNMS test devices
| |||||||||||||
| CsnStackingOperUnitBuildlVer | 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.14 | DisplayString (SIZE (0..32)) | RO | ICX64S08030t.bin | |||||||||
column · DisplayString (SIZE (0..32)) · read-only · current The version of the running software build Example values from LibreNMS test devices
| |||||||||||||
| TsnStackingConfigStackTrunkTable | 1.3.6.1.4.1.1991.1.1.3.31.2.3 | NA | deprecated | ||||||||||
table · not-accessible · deprecated Stacking configuration stack trunk table. | |||||||||||||
| RsnStackingConfigStackTrunkEntry | 1.3.6.1.4.1.1991.1.1.3.31.2.3.1 | NA | deprecated | ||||||||||
row · not-accessible · deprecated An entry in the stacking configuration Stack trunk table. | |||||||||||||
| CsnStackingConfigStackTrunkUnit | 1.3.6.1.4.1.1991.1.1.3.31.2.3.1.1 | Integer32 | NA | deprecated | |||||||||
column · Integer32 · not-accessible · deprecated The stacking unit Id | |||||||||||||
| CsnStackingConfigStackTrunkPort1 | 1.3.6.1.4.1.1991.1.1.3.31.2.3.1.2 | InterfaceIndexOrZero | NA | deprecated | |||||||||
column · InterfaceIndexOrZero · not-accessible · deprecated The IfIndex for the first (primary) port of the configured stack trunk. There are two ports per stack trunk. In some case, a physical port may contain more than one port, e.g. one 40G (1/2/2) for ICX6610 has 4x10G ports. It returns 0 if the port does not exist. | |||||||||||||
| CsnStackingConfigStackTrunkPort2 | 1.3.6.1.4.1.1991.1.1.3.31.2.3.1.3 | InterfaceIndexOrZero | NA | deprecated | |||||||||
column · InterfaceIndexOrZero · not-accessible · deprecated The IfIndex for the second port of the configured stack trunk. There are two ports per stack trunk. In some case, a physical port may contain more than one logical port, e.g. one 40G (1/2/2) for ICX6610 has 4x10G ports. It returns 0 if the port does not exist. | |||||||||||||
| CsnStackingConfigStackTrunkRowStatus | 1.3.6.1.4.1.1991.1.1.3.31.2.3.1.4 | INTEGER | RW | deprecated | |||||||||
column · INTEGER · read-write · deprecated This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row If the row exists, then a SET with value of create(4) returns error 'wrongValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuchName...no such row other(1).....some other cases valid(2)....the row exists and is valid
| |||||||||||||
| CsnStackingConfigStackTrunkNumPort1 | 1.3.6.1.4.1.1991.1.1.3.31.2.3.1.5 | Integer32 | RO | deprecated | |||||||||
column · Integer32 · read-only · deprecated Number of logical ports for the first (primary) port of the configured stack trunk. In some case, a physical port may contain more than one logical port, e.g. one 40G (1/2/2) for ICX6610 has 4x10G ports. It returns 0 if the port does not exist. | |||||||||||||
| CsnStackingConfigStackTrunkNumPort2 | 1.3.6.1.4.1.1991.1.1.3.31.2.3.1.6 | Integer32 | RO | deprecated | |||||||||
column · Integer32 · read-only · deprecated Number of logical ports for the second port of the configured stack trunk. In some case, a physical port may contain more than one logical port, e.g. one 40G (1/2/2) for ICX6610 has 4x10G ports. It returns 0 if the port does not exist. | |||||||||||||
| TsnStackingConfigPeriPortTable | 1.3.6.1.4.1.1991.1.1.3.31.2.4 | NA | deprecated | ||||||||||
table · not-accessible · deprecated Stacking configuration peripheral port table. | |||||||||||||
| RsnStackingConfigPeriPortEntry | 1.3.6.1.4.1.1991.1.1.3.31.2.4.1 | NA | deprecated | ||||||||||
row · not-accessible · deprecated An entry in the stacking configuration peripheral port table. | |||||||||||||
| CsnStackingConfigPeriPortUnit | 1.3.6.1.4.1.1991.1.1.3.31.2.4.1.1 | Integer32 | NA | deprecated | |||||||||
column · Integer32 · not-accessible · deprecated The stacking unit Id | |||||||||||||
| CsnStackingConfigPeriPortPort | 1.3.6.1.4.1.1991.1.1.3.31.2.4.1.2 | InterfaceIndexOrZero | NA | deprecated | |||||||||
column · InterfaceIndexOrZero · not-accessible · deprecated The IfIndex for the configured mixed stacking peripheral port. It is up to eight peripheral ports per unit. | |||||||||||||
| CsnStackingConfigPeriPortRowStatus | 1.3.6.1.4.1.1991.1.1.3.31.2.4.1.3 | INTEGER | RW | deprecated | |||||||||
column · INTEGER · read-write · deprecated This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row If the row exists, then a SET with value of create(4) returns error 'wrongValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuchName...no such row other(1).....some other cases valid(2)....the row exists and is valid
| |||||||||||||
| TsnStackingConfigPeriTrunkTable | 1.3.6.1.4.1.1991.1.1.3.31.2.5 | NA | deprecated | ||||||||||
table · not-accessible · deprecated Stacking configuration peripheral trunk table. | |||||||||||||
| RsnStackingConfigPeriTrunkEntry | 1.3.6.1.4.1.1991.1.1.3.31.2.5.1 | NA | deprecated | ||||||||||
row · not-accessible · deprecated An entry in the stacking configuration peripheral trunk table. | |||||||||||||
| CsnStackingConfigPeriTrunkUnit | 1.3.6.1.4.1.1991.1.1.3.31.2.5.1.1 | Integer32 | NA | deprecated | |||||||||
column · Integer32 · not-accessible · deprecated The stacking unit Id | |||||||||||||
| CsnStackingConfigPeriTrunkPort1 | 1.3.6.1.4.1.1991.1.1.3.31.2.5.1.2 | InterfaceIndexOrZero | NA | deprecated | |||||||||
column · InterfaceIndexOrZero · not-accessible · deprecated The IfIndex for the first port of the configured mixed stacking peripheral trunk. There are two ports per peripheral trunk. It is up to four peripheral trunks per unit. | |||||||||||||
| CsnStackingConfigPeriTrunkPort2 | 1.3.6.1.4.1.1991.1.1.3.31.2.5.1.3 | InterfaceIndexOrZero | NA | deprecated | |||||||||
column · InterfaceIndexOrZero · not-accessible · deprecated The IfIndex for the second port of the configured mixed stacking peripheral trunk. There are two ports per peripheral trunk. It is up to four peripheral trunks per unit. | |||||||||||||
| CsnStackingConfigPeriTrunkRowStatus | 1.3.6.1.4.1.1991.1.1.3.31.2.5.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row If the row exists, then a SET with value of create(4) returns error 'wrongValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuchName...no such row other(1).....some other cases valid(2)....the row exists and is valid
| |||||||||||||
| TsnStackingNeighborPortTable | 1.3.6.1.4.1.1991.1.1.3.31.2.6 | NA | |||||||||||
table · not-accessible · current Stacking neighbor port table. | |||||||||||||
| RsnStackingNeighborPortEntry | 1.3.6.1.4.1.1991.1.1.3.31.2.6.1 | NA | |||||||||||
row · not-accessible · current An entry in the stacking neighborport table. | |||||||||||||
| CsnStackingNeighborPortUnit | 1.3.6.1.4.1.1991.1.1.3.31.2.6.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The stacking unit Id | |||||||||||||
| CsnStackingNeighborPortStackPort | 1.3.6.1.4.1.1991.1.1.3.31.2.6.1.2 | InterfaceIndexOrZero | NA | ||||||||||
column · InterfaceIndexOrZero · not-accessible · current The IfIndex for the stack port on this unit. if it is a stack trunk, then this port is the first port of stack trunk. | |||||||||||||
| CsnStackingNeighborPortNeighborPort | 1.3.6.1.4.1.1991.1.1.3.31.2.6.1.3 | InterfaceIndexOrZero | RO | ||||||||||
column · InterfaceIndexOrZero · read-only · current The IfIndex for the neighbor port of the stack port on this unit. if it is a stack trunk, then this port is the first port of stack trunk on the neighbor unit. It returns 0 if neighbor port does not exist for this stack port. | |||||||||||||