FOUNDRY-SN-OSPF-GROUP-MIB
Brocade Communication Systems, Inc. (formerly 'Foundry Networks, Inc.')Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
snmptranslate -m FOUNDRY-SN-OSPF-GROUP-MIB -Tpsnmpwalk -v2c -c <community> -m FOUNDRY-SN-OSPF-GROUP-MIB <host> 1.3.6.1.4.1.1991.1.2.4Imports
| FOUNDRY-SN-ROOT-MIB | router |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IsnOspf | 1.3.6.1.4.1.1991.1.2.4 | |||
identity Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | ||||
| NsnOspfGen | 1.3.6.1.4.1.1991.1.2.4.1 | |||
| SsnOspfRouterId | 1.3.6.1.4.1.1991.1.2.4.1.1 | RouterID | RW | |
scalar · RouterID · read-write · current A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses. | ||||
| SsnOspfAdminStat | 1.3.6.1.4.1.1991.1.2.4.1.2 | RtrStatus | RW | |
scalar · RtrStatus · read-write · current The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it on all interfaces. | ||||
| SsnOspfASBdrRtrStatus | 1.3.6.1.4.1.1991.1.2.4.1.3 | TruthVal | RW | |
scalar · TruthVal · read-write · current A flag to note whether this router is an Autonomous System border router. | ||||
| SsnOspfRedisMode | 1.3.6.1.4.1.1991.1.2.4.1.4 | RtrStatus | RW | |
scalar · RtrStatus · read-write · current The Redistribution status of OSPF in the router. The value 'enabled' denotes that the OSPF Redistribution is active; 'disabled' disables it on the router. | ||||
| SsnOspfDefaultOspfMetricValue | 1.3.6.1.4.1.1991.1.2.4.1.5 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current The metric of using a default OSPF Metric value on this route. | ||||
| SsnOspfExternLSACount | 1.3.6.1.4.1.1991.1.2.4.1.6 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The number of external (LS type 5) link-state advertisements in the link-state database. | ||||
| SsnOspfExternLSACksumSum | 1.3.6.1.4.1.1991.1.2.4.1.7 | Integer32 | RO | |
scalar · Integer32 · read-only · current The 32-bit unsigned sum of the LS checksums of the external link-state advertisements contained in the link-state database. This sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers. | ||||
| SsnOspfOriginateNewLSAs | 1.3.6.1.4.1.1991.1.2.4.1.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of new link-state advertisements that have been originated. This number is incremented each time the router originates a new LSA. | ||||
| SsnOspfRxNewLSAs | 1.3.6.1.4.1.1991.1.2.4.1.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of link-state advertisements received determined to be new instantiations. This number does not include newer instantiations of self-originated link-state advertisements. | ||||
| SsnOspfOspfRedisMetricType | 1.3.6.1.4.1.1991.1.2.4.1.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current type1: For External Type 1 (comparable value) the intra-area and inter-area routes, it is an OSPF metric plus the External Metric. type2: For external Type 2 (non-comparable value) routes, it is the external metric.
| ||||
| SsnOspfExtLsdbLimit | 1.3.6.1.4.1.1991.1.2.4.1.11 | Integer32 | RW | |
scalar · Integer32 · read-write · current The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. When the number of non-default AS-external-LSAs in a router's link-state database reaches ospfExtLsdbLimit, the router enters Overflow- State. The router never holds more than ospfExtLsdbLimit non-default AS-external-LSAs in its database. OspfExtLsdbLimit MUST be set identically in all routers attached to the OSPF backbone and/or any regular OSPF area. (i.e., OSPF stub areas and NSSAs are excluded). | ||||
| SsnOspfExitOverflowInterval | 1.3.6.1.4.1.1991.1.2.4.1.12 | INTEGER (0..86400) | RW | |
scalar · INTEGER (0..86400) · read-write · current The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default AS-external-LSAs. When set to 0, the router will not leave Overflow- State until restarted. | ||||
| SsnOspfRfc1583Compatibility | 1.3.6.1.4.1.1991.1.2.4.1.13 | INTEGER | RW | |
scalar · INTEGER · read-write · current This allows the ospf routing either compatible with RFC1583 or RFC2178. enabled(1)........activate RFC1583 compatibility rather than RFC2178 disabled(0).......disable RFC1583 compatibility and compatible to RFC2178.
| ||||
| SsnOspfRouterIdFormat | 1.3.6.1.4.1.1991.1.2.4.1.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to specify whether RouterId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address.
| ||||
| SsnOspfDistance | 1.3.6.1.4.1.1991.1.2.4.1.15 | INTEGER (0..255) | RW | obsolete |
scalar · INTEGER (0..255) · read-write · obsolete OSPF Adminitrative distance. 0 if distance is not set. | ||||
| SsnOspfDistanceIntra | 1.3.6.1.4.1.1991.1.2.4.1.16 | INTEGER (1..255) | RW | |
scalar · INTEGER (1..255) · read-write · current OSPF Adminitrative distance - Intra Area. | ||||
| SsnOspfDistanceInter | 1.3.6.1.4.1.1991.1.2.4.1.17 | INTEGER (1..255) | RW | |
scalar · INTEGER (1..255) · read-write · current OSPF Adminitrative distance - Inter Area. | ||||
| SsnOspfDistanceExternal | 1.3.6.1.4.1.1991.1.2.4.1.18 | INTEGER (1..255) | RW | |
scalar · INTEGER (1..255) · read-write · current OSPF Adminitrative distance - External. | ||||
| NsnOspfArea | 1.3.6.1.4.1.1991.1.2.4.2 | |||
| TsnOspfAreaTable | 1.3.6.1.4.1.1991.1.2.4.2.1 | NA | ||
table · not-accessible · current Information describing the configured parameters and cumulative statistics of the router's attached areas. | ||||
| RsnOspfAreaEntry | 1.3.6.1.4.1.1991.1.2.4.2.1.1 | NA | ||
row · not-accessible · current Information describing the configured parameters and cumulative statistics of one of the router's attached areas.
| ||||
| CsnOspfAreaId | 1.3.6.1.4.1.1991.1.2.4.2.1.1.1 | AreaID | RO | |
column · AreaID · read-only · current A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. | ||||
| CsnOspfImportASExtern | 1.3.6.1.4.1.1991.1.2.4.2.1.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current The area's support for importing AS external link- state advertisements. 0: Stub Area Type 1: Normal Area Type 2: NSSA Area Type | ||||
| CsnOspfStubMetric | 1.3.6.1.4.1.1991.1.2.4.2.1.1.3 | BigMetric | RW | |
column · BigMetric · read-write · current The metric value applied at the default type of service(ospfMetric). By default, this equals the least metric at the type of service among the interfaces to other areas. This Object exist if only if the value of snOspfAreaSummary is snOspfAreaSummary(2); Otherwise, an SNMP_GET/GET_NEXT attempt of this Object will return NO_SUCH_NAME. | ||||
| CsnOspfAreaRowStatus | 1.3.6.1.4.1.1991.1.2.4.2.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| ||||
| CsnOspfAreaIdFormat | 1.3.6.1.4.1.1991.1.2.4.2.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address.
| ||||
| NsnOspfAddrRange | 1.3.6.1.4.1.1991.1.2.4.3 | |||
| TsnOspfAreaRangeTable | 1.3.6.1.4.1.1991.1.2.4.3.1 | NA | ||
table · not-accessible · current A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255 | ||||
| RsnOspfAreaRangeEntry | 1.3.6.1.4.1.1991.1.2.4.3.1.1 | NA | ||
row · not-accessible · current A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255 | ||||
| CsnOspfAreaRangeAreaID | 1.3.6.1.4.1.1991.1.2.4.3.1.1.1 | AreaID | RO | |
column · AreaID · read-only · current The Area the Address Range is to be found within. | ||||
| CsnOspfAreaRangeNet | 1.3.6.1.4.1.1991.1.2.4.3.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the Net or Subnet indicated by the range. | ||||
| CsnOspfAreaRangeMask | 1.3.6.1.4.1.1991.1.2.4.3.1.1.3 | IpAddress | RW | |
column · IpAddress · read-write · current The Subnet Mask that pertains to the Net or Subnet. | ||||
| CsnOspfAreaRangeRowStatus | 1.3.6.1.4.1.1991.1.2.4.3.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| ||||
| CsnOspfAreaRangeAreaIdFormat | 1.3.6.1.4.1.1991.1.2.4.3.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address.
| ||||
| NsnOspfIntf | 1.3.6.1.4.1.1991.1.2.4.4 | |||
| TsnOspfIfTable | 1.3.6.1.4.1.1991.1.2.4.4.1 | NA | deprecated | |
table · not-accessible · deprecated The OSPF Interface Table describes the interfaces from the viewpoint of OSPF. | ||||
| RsnOspfIfEntry | 1.3.6.1.4.1.1991.1.2.4.4.1.1 | NA | deprecated | |
row · not-accessible · deprecated The OSPF Interface Entry describes one interface from the viewpoint of OSPF.
| ||||
| CsnOspfIfPort | 1.3.6.1.4.1.1991.1.2.4.4.1.1.1 | Integer32 | RO | deprecated |
column · Integer32 · read-only · deprecated The physical router port of this OSPF interface. | ||||
| CsnOspfIfAreaId | 1.3.6.1.4.1.1991.1.2.4.4.1.1.2 | AreaID | RW | deprecated |
column · AreaID · read-write · deprecated A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. | ||||
| CsnOspfIfAdminStat | 1.3.6.1.4.1.1991.1.2.4.4.1.1.3 | RtrStatus | RW | deprecated |
column · RtrStatus · read-write · deprecated The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF. | ||||
| CsnOspfIfRtrPriority | 1.3.6.1.4.1.1991.1.2.4.4.1.1.4 | DesignatedRouterPriority | RW | deprecated |
column · DesignatedRouterPriority · read-write · deprecated The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their router id as a tie breaker. | ||||
| CsnOspfIfTransitDelay | 1.3.6.1.4.1.1991.1.2.4.4.1.1.5 | UpToMaxAge | RW | deprecated |
column · UpToMaxAge · read-write · deprecated The estimated number of seconds it takes to transmit a link- state update packet over this interface. | ||||
| CsnOspfIfRetransInterval | 1.3.6.1.4.1.1991.1.2.4.4.1.1.6 | UpToMaxAge | RW | deprecated |
column · UpToMaxAge · read-write · deprecated The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. | ||||
| CsnOspfIfHelloInterval | 1.3.6.1.4.1.1991.1.2.4.4.1.1.7 | HelloRange | RW | deprecated |
column · HelloRange · read-write · deprecated The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network. | ||||
| CsnOspfIfRtrDeadInterval | 1.3.6.1.4.1.1991.1.2.4.4.1.1.8 | PositiveInteger | RW | deprecated |
column · PositiveInteger · read-write · deprecated The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network. | ||||
| CsnOspfIfAuthType | 1.3.6.1.4.1.1991.1.2.4.4.1.1.9 | INTEGER (0..255) | RW | deprecated |
column · INTEGER (0..255) · read-write · deprecated The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis. | ||||
| CsnOspfIfAuthKey | 1.3.6.1.4.1.1991.1.2.4.4.1.1.10 | OCTET STRING (SIZE (0..8)) | RW | deprecated |
column · OCTET STRING (SIZE (0..8)) · read-write · deprecated The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, snOspfIfAuthKey always returns an Octet String of length zero. | ||||
| CsnOspfIfMetricValue | 1.3.6.1.4.1.1991.1.2.4.4.1.1.11 | INTEGER (1..65535) | RW | deprecated |
column · INTEGER (1..65535) · read-write · deprecated The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. | ||||
| CsnOspfIfRowStatus | 1.3.6.1.4.1.1991.1.2.4.4.1.1.12 | INTEGER | RW | deprecated |
column · INTEGER · read-write · deprecated This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| ||||
| CsnOspfIfMd5AuthKeyId | 1.3.6.1.4.1.1991.1.2.4.4.1.1.13 | INTEGER (0..255) | RW | deprecated |
column · INTEGER (0..255) · read-write · deprecated The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIfMd5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest appended to the OSPF packet. Key Identifiers are unique per-interface (or equivalently, per-subnet). | ||||
| CsnOspfIfMd5AuthKey | 1.3.6.1.4.1.1991.1.2.4.4.1.1.14 | OCTET STRING (SIZE (0..16)) | RW | deprecated |
column · OCTET STRING (SIZE (0..16)) · read-write · deprecated The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an Octet String of length zero. | ||||
| CsnOspfIfMd5ActivationWaitTime | 1.3.6.1.4.1.1991.1.2.4.4.1.1.15 | INTEGER (0..14400) | RW | deprecated |
column · INTEGER (0..14400) · read-write · deprecated The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). | ||||
| CsnOspfIfAreaIdFormat | 1.3.6.1.4.1.1991.1.2.4.4.1.1.16 | INTEGER | RO | deprecated |
column · INTEGER · read-only · deprecated This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address.
| ||||
| CsnOspfIfPassiveMode | 1.3.6.1.4.1.1991.1.2.4.4.1.1.17 | INTEGER | RW | deprecated |
column · INTEGER · read-write · deprecated This object control the passive mode of this interface.
| ||||
| CsnOspfIfDatabaseFilterAllOut | 1.3.6.1.4.1.1991.1.2.4.4.1.1.18 | INTEGER | RW | deprecated |
column · INTEGER · read-write · deprecated This object control the filtering of outgoing OSPF LSA on this interface.
| ||||
| CsnOspfIfMtuIgnore | 1.3.6.1.4.1.1991.1.2.4.4.1.1.19 | INTEGER | RW | deprecated |
column · INTEGER · read-write · deprecated This object control MTU detection mode of this interface.
| ||||
| CsnOspfIfNetworkP2mp | 1.3.6.1.4.1.1991.1.2.4.4.1.1.20 | INTEGER | RW | deprecated |
column · INTEGER · read-write · deprecated This object enable/disable P2MP mode of this interface.
| ||||
| TsnOspfIf2Table | 1.3.6.1.4.1.1991.1.2.4.4.2 | NA | ||
table · not-accessible · current The OSPF Interface Table describes the interfaces from the viewpoint of OSPF. | ||||
| RsnOspfIf2Entry | 1.3.6.1.4.1.1991.1.2.4.4.2.1 | NA | ||
row · not-accessible · current The OSPF Interface Entry describes one interface from the viewpoint of OSPF.
| ||||
| CsnOspfIf2Port | 1.3.6.1.4.1.1991.1.2.4.4.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The physical router port of this OSPF interface. | ||||
| CsnOspfIf2AreaId | 1.3.6.1.4.1.1991.1.2.4.4.2.1.2 | AreaID | RW | |
column · AreaID · read-write · current A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. | ||||
| CsnOspfIf2AdminStat | 1.3.6.1.4.1.1991.1.2.4.4.2.1.3 | RtrStatus | RW | |
column · RtrStatus · read-write · current The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF. | ||||
| CsnOspfIf2RtrPriority | 1.3.6.1.4.1.1991.1.2.4.4.2.1.4 | DesignatedRouterPriority | RW | |
column · DesignatedRouterPriority · read-write · current The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their router id as a tie breaker. | ||||
| CsnOspfIf2TransitDelay | 1.3.6.1.4.1.1991.1.2.4.4.2.1.5 | UpToMaxAge | RW | |
column · UpToMaxAge · read-write · current The estimated number of seconds it takes to transmit a link- state update packet over this interface. | ||||
| CsnOspfIf2RetransInterval | 1.3.6.1.4.1.1991.1.2.4.4.2.1.6 | UpToMaxAge | RW | |
column · UpToMaxAge · read-write · current The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. | ||||
| CsnOspfIf2HelloInterval | 1.3.6.1.4.1.1991.1.2.4.4.2.1.7 | HelloRange | RW | |
column · HelloRange · read-write · current The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network. | ||||
| CsnOspfIf2RtrDeadInterval | 1.3.6.1.4.1.1991.1.2.4.4.2.1.8 | PositiveInteger | RW | |
column · PositiveInteger · read-write · current The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network. | ||||
| CsnOspfIf2AuthType | 1.3.6.1.4.1.1991.1.2.4.4.2.1.9 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis. | ||||
| CsnOspfIf2AuthKey | 1.3.6.1.4.1.1991.1.2.4.4.2.1.10 | OCTET STRING (SIZE (0..8)) | RW | |
column · OCTET STRING (SIZE (0..8)) · read-write · current The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, snOspfIf2AuthKey always returns an Octet String of length zero. | ||||
| CsnOspfIf2MetricValue | 1.3.6.1.4.1.1991.1.2.4.4.2.1.11 | INTEGER (1..65535) | RW | |
column · INTEGER (1..65535) · read-write · current The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. | ||||
| CsnOspfIf2RowStatus | 1.3.6.1.4.1.1991.1.2.4.4.2.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| ||||
| CsnOspfIf2Md5AuthKeyId | 1.3.6.1.4.1.1991.1.2.4.4.2.1.13 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIf2Md5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest appended to the OSPF packet. Key Identifiers are unique per-interface (or equivalently, per-subnet). | ||||
| CsnOspfIf2Md5AuthKey | 1.3.6.1.4.1.1991.1.2.4.4.2.1.14 | OCTET STRING (SIZE (0..16)) | RW | |
column · OCTET STRING (SIZE (0..16)) · read-write · current The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIf2Md5AuthKey always returns an Octet String of length zero. | ||||
| CsnOspfIf2Md5ActivationWaitTime | 1.3.6.1.4.1.1991.1.2.4.4.2.1.15 | INTEGER (0..14400) | RW | |
column · INTEGER (0..14400) · read-write · current The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). | ||||
| CsnOspfIf2AreaIdFormat | 1.3.6.1.4.1.1991.1.2.4.4.2.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address.
| ||||
| CsnOspfIf2PassiveMode | 1.3.6.1.4.1.1991.1.2.4.4.2.1.17 | INTEGER | RW | |
column · INTEGER · read-write · current This object control the passive mode of this interface.
| ||||
| CsnOspfIf2DatabaseFilterAllOut | 1.3.6.1.4.1.1991.1.2.4.4.2.1.18 | INTEGER | RW | |
column · INTEGER · read-write · current This object control the filtering of outgoing OSPF LSA on this interface.
| ||||
| CsnOspfIf2MtuIgnore | 1.3.6.1.4.1.1991.1.2.4.4.2.1.19 | INTEGER | RW | |
column · INTEGER · read-write · current This object control MTU detection mode of this interface.
| ||||
| CsnOspfIf2NetworkP2mp | 1.3.6.1.4.1.1991.1.2.4.4.2.1.20 | INTEGER | RW | |
column · INTEGER · read-write · current This object enable/disable P2MP mode of this interface.
| ||||
| CsnOspfIf2NetworkP2pt | 1.3.6.1.4.1.1991.1.2.4.4.2.1.21 | INTEGER | RW | |
column · INTEGER · read-write · current This object enable/disable Point-to-Point mode of this interface.
| ||||
| CsnOspfIf2NetworkNonBroadcast | 1.3.6.1.4.1.1991.1.2.4.4.2.1.22 | INTEGER | RW | |
column · INTEGER · read-write · current This object enable/disable non broadcast mode of this interface.
| ||||
| NsnOspfVirtIf | 1.3.6.1.4.1.1991.1.2.4.5 | |||
| TsnOspfVirtIfTable | 1.3.6.1.4.1.1991.1.2.4.5.1 | NA | ||
table · not-accessible · current Information about this router's virtual interfaces. | ||||
| RsnOspfVirtIfEntry | 1.3.6.1.4.1.1991.1.2.4.5.1.1 | NA | ||
row · not-accessible · current Information about a single Virtual Interface. | ||||
| CsnOspfVirtIfAreaID | 1.3.6.1.4.1.1991.1.2.4.5.1.1.1 | AreaID | RO | |
column · AreaID · read-only · current The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 | ||||
| CsnOspfVirtIfNeighbor | 1.3.6.1.4.1.1991.1.2.4.5.1.1.2 | RouterID | RO | |
column · RouterID · read-only · current The Router ID of the Virtual Neighbor. | ||||
| CsnOspfVirtIfTransitDelay | 1.3.6.1.4.1.1991.1.2.4.5.1.1.3 | UpToMaxAge | RW | |
column · UpToMaxAge · read-write · current The estimated number of seconds it takes to transmit a link- state update packet over this interface. | ||||
| CsnOspfVirtIfRetransInterval | 1.3.6.1.4.1.1991.1.2.4.5.1.1.4 | UpToMaxAge | RW | |
column · UpToMaxAge · read-write · current The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. This value should be well over the expected round-trip time. | ||||
| CsnOspfVirtIfHelloInterval | 1.3.6.1.4.1.1991.1.2.4.5.1.1.5 | HelloRange | RW | |
column · HelloRange · read-write · current The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor. | ||||
| CsnOspfVirtIfRtrDeadInterval | 1.3.6.1.4.1.1991.1.2.4.5.1.1.6 | PositiveInteger | RW | |
column · PositiveInteger · read-write · current The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor. | ||||
| CsnOspfVirtIfAuthType | 1.3.6.1.4.1.1991.1.2.4.5.1.1.7 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis. | ||||
| CsnOspfVirtIfAuthKey | 1.3.6.1.4.1.1991.1.2.4.5.1.1.8 | OCTET STRING (SIZE (0..8)) | RW | |
column · OCTET STRING (SIZE (0..8)) · read-write · current If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, snOspfVifAuthKey always returns a string of length zero. | ||||
| CsnOspfVirtIfRowStatus | 1.3.6.1.4.1.1991.1.2.4.5.1.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| ||||
| CsnOspfVirtIfMd5AuthKeyId | 1.3.6.1.4.1.1991.1.2.4.5.1.1.10 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfVirtIfMd5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest appended to the OSPF packet. Key Identifiers are unique per-interface (or equivalently, per-subnet). | ||||
| CsnOspfVirtIfMd5AuthKey | 1.3.6.1.4.1.1991.1.2.4.5.1.1.11 | OCTET STRING (SIZE (0..16)) | RW | |
column · OCTET STRING (SIZE (0..16)) · read-write · current The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an Octet String of length zero. | ||||
| CsnOspfVirtIfMd5ActivationWaitTime | 1.3.6.1.4.1.1991.1.2.4.5.1.1.12 | INTEGER (0..14400) | RW | |
column · INTEGER (0..14400) · read-write · current The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). | ||||
| CsnOspfVirtIfAreaIdFormat | 1.3.6.1.4.1.1991.1.2.4.5.1.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address.
| ||||
| NsnOspfRedis | 1.3.6.1.4.1.1991.1.2.4.6 | |||
| TsnOspfRedisTable | 1.3.6.1.4.1.1991.1.2.4.6.1 | NA | ||
table · not-accessible · current The OSPF Redistribution Table contains a list of routes that could be imported into the OSPF domain. | ||||
| RsnOspfRedisEntry | 1.3.6.1.4.1.1991.1.2.4.6.1.1 | NA | ||
row · not-accessible · current The OSPF Redistribution Entry specifies a particular RIP or Static route to be imported into the OSPF domain.
| ||||
| CsnOspfRedisIndex | 1.3.6.1.4.1.1991.1.2.4.6.1.1.1 | INTEGER (1..64) | RO | |
column · INTEGER (1..64) · read-only · current The destination IP address that associates with this particular route. | ||||
| CsnOspfRedisIpAddress | 1.3.6.1.4.1.1991.1.2.4.6.1.1.2 | IpAddress | RW | |
column · IpAddress · read-write · current The destination IP address that associates with this particular route. | ||||
| CsnOspfRedisMask | 1.3.6.1.4.1.1991.1.2.4.6.1.1.3 | IpAddress | RW | |
column · IpAddress · read-write · current The Subnet Mask that pertains to this route. | ||||
| CsnOspfRedisAction | 1.3.6.1.4.1.1991.1.2.4.6.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The action to be taken if the route match this entry. noImport(0): - the route is NOT imported into OSPF Domain. import(1): - the route is imported into OSPF Domain as external type 2 route.
| ||||
| CsnOspfRedisProtocol | 1.3.6.1.4.1.1991.1.2.4.6.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The imported routes into OSPF domain is set in the following: rip(1): - the RIP route. all(2): - all protocol route. static(3): - the static route. bgp(4): - the BGP route. connected(5): - the connected route. isis(6): - the ISIS route.
| ||||
| CsnOspfRedisSetOspfMetric | 1.3.6.1.4.1.1991.1.2.4.6.1.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The value indicates to which the route metric should match: disabled(0): - the route metric does NOT match the OSPF metric field. enabled(1): - the route metric matches the OSPF metric field.
| ||||
| CsnOspfRedisOspfMetricValue | 1.3.6.1.4.1.1991.1.2.4.6.1.1.7 | Metric | RW | |
column · Metric · read-write · current The metric of using OSPF Metric value on this route. | ||||
| CsnOspfRedisMatchRipMetric | 1.3.6.1.4.1.1991.1.2.4.6.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current The value indicates to which the route metric should match: disabled(0): - the route metric does NOT match the RIP metric field. enabled(1): - the route metric matches the RIP metric field.
| ||||
| CsnOspfRedisRipMetricValue | 1.3.6.1.4.1.1991.1.2.4.6.1.1.9 | INTEGER (1..15) | RW | |
column · INTEGER (1..15) · read-write · current The metric of using RIP Metric value (1 to 15 hops) on this route. | ||||
| CsnOspfRedisRowStatus | 1.3.6.1.4.1.1991.1.2.4.6.1.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| ||||
| NsnOspfNbr | 1.3.6.1.4.1.1991.1.2.4.7 | |||
| TsnOspfNbrTable | 1.3.6.1.4.1.1991.1.2.4.7.1 | NA | ||
table · not-accessible · current A table of non-virtual neighbor information. | ||||
| RsnOspfNbrEntry | 1.3.6.1.4.1.1991.1.2.4.7.1.1 | NA | ||
| CsnOspfNbrEntryIndex | 1.3.6.1.4.1.1991.1.2.4.7.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The table entry index of this neighbor. | ||||
| CsnOspfNbrPort | 1.3.6.1.4.1.1991.1.2.4.7.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The physical port of this neighbor. | ||||
| CsnOspfNbrIpAddr | 1.3.6.1.4.1.1991.1.2.4.7.1.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of this neighbor. | ||||
| CsnOspfNbrIndex | 1.3.6.1.4.1.1991.1.2.4.7.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The neighbor index of each port and each IP address. | ||||
| CsnOspfNbrRtrId | 1.3.6.1.4.1.1991.1.2.4.7.1.1.5 | RouterID | RO | |
column · RouterID · read-only · current A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System. | ||||
| CsnOspfNbrOptions | 1.3.6.1.4.1.1991.1.2.4.7.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current A Bit Mask corresponding to the neighbor's op- tions field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 1, if set, indicates that the associated area accepts and operates on external informa- tion; if zero, it is a stub area. Bit 2, if set, indicates that the system is ca- pable of routing IP Multicast datagrams; i.e., that it implements the Multicast Extensions to OSPF. Bit 3, if set, indicates that the associated area is an NSSA. These areas are capable of carrying type 7 external advertisements, which are translated into type 5 external advertise- ments at NSSA borders. | ||||
| CsnOspfNbrPriority | 1.3.6.1.4.1.1991.1.2.4.7.1.1.7 | DesignatedRouterPriority | RO | |
column · DesignatedRouterPriority · read-only · current The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designated router on this particular network. | ||||
| CsnOspfNbrState | 1.3.6.1.4.1.1991.1.2.4.7.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The State of the relationship with this Neigh- bor.
| ||||
| CsnOspfNbrEvents | 1.3.6.1.4.1.1991.1.2.4.7.1.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this neighbor relationship has changed state, or an error has occurred. | ||||
| CsnOspfNbrLsRetransQLen | 1.3.6.1.4.1.1991.1.2.4.7.1.1.10 | Gauge32 | RO | |
column · Gauge32 · read-only · current The current length of the retransmission queue. | ||||
| NsnOspfVirtNbr | 1.3.6.1.4.1.1991.1.2.4.8 | |||
| TsnOspfVirtNbrTable | 1.3.6.1.4.1.1991.1.2.4.8.1 | NA | ||
table · not-accessible · current A table of virtual neighbor information. | ||||
| RsnOspfVirtNbrEntry | 1.3.6.1.4.1.1991.1.2.4.8.1.1 | NA | ||
| CsnOspfVirtNbrEntryIndex | 1.3.6.1.4.1.1991.1.2.4.8.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The table entry index of this virtual neighbor. | ||||
| CsnOspfVirtNbrArea | 1.3.6.1.4.1.1991.1.2.4.8.1.1.2 | AreaID | RO | |
column · AreaID · read-only · current The Transit Area Identifier. | ||||
| CsnOspfVirtNbrRtrId | 1.3.6.1.4.1.1991.1.2.4.8.1.1.3 | RouterID | RO | |
column · RouterID · read-only · current A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. | ||||
| CsnOspfVirtNbrIpAddr | 1.3.6.1.4.1.1991.1.2.4.8.1.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address this Virtual Neighbor is using. | ||||
| CsnOspfVirtNbrOptions | 1.3.6.1.4.1.1991.1.2.4.8.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current A bit map corresponding to the neighbor's options field. Thus, Bit 1, if set, indicates that the neighbor supports Type of Service Routing; if zero, no metrics other than TOS 0 are in use by the neighbor. | ||||
| CsnOspfVirtNbrState | 1.3.6.1.4.1.1991.1.2.4.8.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the Virtual Neighbor Relationship.
| ||||
| CsnOspfVirtNbrEvents | 1.3.6.1.4.1.1991.1.2.4.8.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this virtual link has changed its state, or an error has occurred. | ||||
| CsnOspfVirtNbrLSRetransQLen | 1.3.6.1.4.1.1991.1.2.4.8.1.1.8 | Gauge32 | RO | |
column · Gauge32 · read-only · current The current length of the retransmission queue. | ||||
| CsnOspfVirtNbrAreaIdFormat | 1.3.6.1.4.1.1991.1.2.4.8.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address.
| ||||
| NsnOspfLsdb | 1.3.6.1.4.1.1991.1.2.4.9 | |||
| TsnOspfLsdbTable | 1.3.6.1.4.1.1991.1.2.4.9.1 | NA | ||
table · not-accessible · current The OSPF Process's Links State Database. | ||||
| RsnOspfLsdbEntry | 1.3.6.1.4.1.1991.1.2.4.9.1.1 | NA | ||
| CsnOspfLsdbEntryIndex | 1.3.6.1.4.1.1991.1.2.4.9.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The table entry index of this Link State Database. | ||||
| CsnOspfLsdbAreaId | 1.3.6.1.4.1.1991.1.2.4.9.1.1.2 | AreaID | RO | |
column · AreaID · read-only · current The 32 bit identifier of the Area from which the LSA was received. | ||||
| CsnOspfLsdbType | 1.3.6.1.4.1.1991.1.2.4.9.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The type of the link state advertisement. Each link state type has a separate advertisement format.
| ||||
| CsnOspfLsdbLsId | 1.3.6.1.4.1.1991.1.2.4.9.1.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. | ||||
| CsnOspfLsdbRouterId | 1.3.6.1.4.1.1991.1.2.4.9.1.1.5 | RouterID | RO | |
column · RouterID · read-only · current The 32 bit number that uniquely identifies the originating router in the Autonomous System. | ||||
| CsnOspfLsdbSequence | 1.3.6.1.4.1.1991.1.2.4.9.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. | ||||
| CsnOspfLsdbAge | 1.3.6.1.4.1.1991.1.2.4.9.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current This field is the age of the link state advertisement in seconds. | ||||
| CsnOspfLsdbChecksum | 1.3.6.1.4.1.1991.1.2.4.9.1.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. | ||||
| CsnOspfLsdbAdvertisement | 1.3.6.1.4.1.1991.1.2.4.9.1.1.9 | OCTET STRING (SIZE (1..65535)) | RO | |
column · OCTET STRING (SIZE (1..65535)) · read-only · current The entire Link State Advertisement, including its header. | ||||
| CsnOspfLsdbAreaIdFormat | 1.3.6.1.4.1.1991.1.2.4.9.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address.
| ||||
| NsnOspfExtLsdb | 1.3.6.1.4.1.1991.1.2.4.10 | |||
| TsnOspfExtLsdbTable | 1.3.6.1.4.1.1991.1.2.4.10.1 | NA | ||
table · not-accessible · current The OSPF Process's Links State Database. | ||||
| RsnOspfExtLsdbEntry | 1.3.6.1.4.1.1991.1.2.4.10.1.1 | NA | ||
| CsnOspfExtLsdbEntryIndex | 1.3.6.1.4.1.1991.1.2.4.10.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The table entry index of this Link State Database. | ||||
| CsnOspfExtLsdbType | 1.3.6.1.4.1.1991.1.2.4.10.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The type of the link state advertisement. Each link state type has a separate advertise- ment format.
| ||||
| CsnOspfExtLsdbLsId | 1.3.6.1.4.1.1991.1.2.4.10.1.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. | ||||
| CsnOspfExtLsdbRouterId | 1.3.6.1.4.1.1991.1.2.4.10.1.1.4 | RouterID | RO | |
column · RouterID · read-only · current The 32 bit number that uniquely identifies the originating router in the Autonomous System. | ||||
| CsnOspfExtLsdbSequence | 1.3.6.1.4.1.1991.1.2.4.10.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. | ||||
| CsnOspfExtLsdbAge | 1.3.6.1.4.1.1991.1.2.4.10.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current This field is the age of the link state adver- tisement in seconds. | ||||
| CsnOspfExtLsdbChecksum | 1.3.6.1.4.1.1991.1.2.4.10.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum. | ||||
| CsnOspfExtLsdbAdvertisement | 1.3.6.1.4.1.1991.1.2.4.10.1.1.8 | OCTET STRING (SIZE (36)) | RO | |
column · OCTET STRING (SIZE (36)) · read-only · current The entire Link State Advertisement, including its header. | ||||
| NsnOspfAreaStatus | 1.3.6.1.4.1.1991.1.2.4.11 | |||
| TsnOspfAreaStatusTable | 1.3.6.1.4.1.1991.1.2.4.11.1 | NA | ||
table · not-accessible · current Information describing the configured parameters and cumulative statistics of the router's attached areas. | ||||
| RsnOspfAreaStatusEntry | 1.3.6.1.4.1.1991.1.2.4.11.1.1 | NA | ||
row · not-accessible · current Information describing the configured parameters and cumulative statistics of one of the router's attached areas. | ||||
| CsnOspfAreaStatusEntryIndex | 1.3.6.1.4.1.1991.1.2.4.11.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The table entry index of this Area. | ||||
| CsnOspfAreaStatusAreaId | 1.3.6.1.4.1.1991.1.2.4.11.1.1.2 | AreaID | RO | |
column · AreaID · read-only · current A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. | ||||
| CsnOspfAreaStatusImportASExtern | 1.3.6.1.4.1.1991.1.2.4.11.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The area's support for importing AS external link- state advertisements. | ||||
| CsnOspfAreaStatusStubMetric | 1.3.6.1.4.1.1991.1.2.4.11.1.1.4 | BigMetric | RO | |
column · BigMetric · read-only · current The metric value applied at the default type of service(ospfMetric). By default, this equals the least metric at the type of service among the interfaces to other areas. This Object exist if only if the value of snOspfAreaSummary is snOspfAreaSummary(2); Otherwise, an SNMP_GET/GET_NEXT attempt of this Object will return NO_SUCH_NAME. | ||||
| CsnOspfAreaStatusSpfRuns | 1.3.6.1.4.1.1991.1.2.4.11.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorithm. | ||||
| CsnOspfAreaStatusAreaBdrRtrCount | 1.3.6.1.4.1.1991.1.2.4.11.1.1.6 | Gauge32 | RO | |
column · Gauge32 · read-only · current The total number of area border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. | ||||
| CsnOspfAreaStatusASBdrRtrCount | 1.3.6.1.4.1.1991.1.2.4.11.1.1.7 | Gauge32 | RO | |
column · Gauge32 · read-only · current The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. | ||||
| CsnOspfAreaStatusLSACount | 1.3.6.1.4.1.1991.1.2.4.11.1.1.8 | Gauge32 | RO | |
column · Gauge32 · read-only · current The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's. | ||||
| CsnOspfAreaStatusLSACksumSum | 1.3.6.1.4.1.1991.1.2.4.11.1.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The 32-bit unsigned sum of the link-state advertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) link-state advertisements. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers. | ||||
| CsnOspfAreaStatusAreaIdFormat | 1.3.6.1.4.1.1991.1.2.4.11.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address.
| ||||
| NsnOspfIfStatus | 1.3.6.1.4.1.1991.1.2.4.12 | |||
| TsnOspfIfStatusTable | 1.3.6.1.4.1.1991.1.2.4.12.1 | NA | ||
table · not-accessible · current The OSPF Interface Status Table describes the interfaces from the viewpoint of OSPF. | ||||
| RsnOspfIfStatusEntry | 1.3.6.1.4.1.1991.1.2.4.12.1.1 | NA | ||
row · not-accessible · current The OSPF Interface Entry describes one interface from the viewpoint of OSPF. | ||||
| CsnOspfIfStatusEntryIndex | 1.3.6.1.4.1.1991.1.2.4.12.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The table entry index of this Area. | ||||
| CsnOspfIfStatusPort | 1.3.6.1.4.1.1991.1.2.4.12.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The physical router port of this OSPF interface. | ||||
| CsnOspfIfStatusIpAddress | 1.3.6.1.4.1.1991.1.2.4.12.1.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of this OSPF interface. | ||||
| CsnOspfIfStatusAreaId | 1.3.6.1.4.1.1991.1.2.4.12.1.1.4 | AreaID | RO | |
column · AreaID · read-only · current A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. | ||||
| CsnOspfIfStatusType | 1.3.6.1.4.1.1991.1.2.4.12.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25, Frame Relay, and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'.
| ||||
| CsnOspfIfStatusAdminStat | 1.3.6.1.4.1.1991.1.2.4.12.1.1.6 | RtrStatus | RO | |
column · RtrStatus · read-only · current The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF. | ||||
| CsnOspfIfStatusRtrPriority | 1.3.6.1.4.1.1991.1.2.4.12.1.1.7 | DesignatedRouterPriority | RO | |
column · DesignatedRouterPriority · read-only · current The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their router id as a tie breaker. | ||||
| CsnOspfIfStatusTransitDelay | 1.3.6.1.4.1.1991.1.2.4.12.1.1.8 | UpToMaxAge | RO | |
column · UpToMaxAge · read-only · current The estimated number of seconds it takes to transmit a link- state update packet over this interface. | ||||
| CsnOspfIfStatusRetransInterval | 1.3.6.1.4.1.1991.1.2.4.12.1.1.9 | UpToMaxAge | RO | |
column · UpToMaxAge · read-only · current The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. | ||||
| CsnOspfIfStatusHelloInterval | 1.3.6.1.4.1.1991.1.2.4.12.1.1.10 | HelloRange | RO | |
column · HelloRange · read-only · current The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network. | ||||
| CsnOspfIfStatusRtrDeadInterval | 1.3.6.1.4.1.1991.1.2.4.12.1.1.11 | PositiveInteger | RO | |
column · PositiveInteger · read-only · current The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network. | ||||
| CsnOspfIfStatusState | 1.3.6.1.4.1.1991.1.2.4.12.1.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current The OSPF Interface State.
| ||||
| CsnOspfIfStatusDesignatedRouter | 1.3.6.1.4.1.1991.1.2.4.12.1.1.13 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the Designated Router. | ||||
| CsnOspfIfStatusBackupDesignatedRouter | 1.3.6.1.4.1.1991.1.2.4.12.1.1.14 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the Backup Designated Router. | ||||
| CsnOspfIfStatusEvents | 1.3.6.1.4.1.1991.1.2.4.12.1.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this OSPF interface has changed its state, or an error has occurred. | ||||
| CsnOspfIfStatusAuthType | 1.3.6.1.4.1.1991.1.2.4.12.1.1.16 | Integer32 | RO | |
column · Integer32 · read-only · current The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis. | ||||
| CsnOspfIfStatusAuthKey | 1.3.6.1.4.1.1991.1.2.4.12.1.1.17 | OCTET STRING (SIZE (0..8)) | RO | |
column · OCTET STRING (SIZE (0..8)) · read-only · current The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, snOspfIfStatusAuthKey always returns an Octet String of length zero. | ||||
| CsnOspfIfStatusMetricValue | 1.3.6.1.4.1.1991.1.2.4.12.1.1.18 | Metric | RO | |
column · Metric · read-only · current The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. | ||||
| CsnOspfIfStatusMd5AuthKeyId | 1.3.6.1.4.1.1991.1.2.4.12.1.1.19 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIfMd5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest appended to the OSPF packet. Key Identifiers are unique per-interface (or equivalently, per-subnet). | ||||
| CsnOspfIfStatusMd5AuthKey | 1.3.6.1.4.1.1991.1.2.4.12.1.1.20 | OCTET STRING (SIZE (0..16)) | RO | |
column · OCTET STRING (SIZE (0..16)) · read-only · current The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an Octet String of length zero. | ||||
| CsnOspfIfStatusMd5ActivationWaitTime | 1.3.6.1.4.1.1991.1.2.4.12.1.1.21 | INTEGER (0..14400) | RO | |
column · INTEGER (0..14400) · read-only · current The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). | ||||
| CsnOspfIfStatusAreaIdFormat | 1.3.6.1.4.1.1991.1.2.4.12.1.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address.
| ||||
| NsnOspfVirtIfStatus | 1.3.6.1.4.1.1991.1.2.4.13 | |||
| TsnOspfVirtIfStatusTable | 1.3.6.1.4.1.1991.1.2.4.13.1 | NA | ||
table · not-accessible · current Information about this router's virtual interfaces. | ||||
| RsnOspfVirtIfStatusEntry | 1.3.6.1.4.1.1991.1.2.4.13.1.1 | NA | ||
row · not-accessible · current Information about a single Virtual Interface. | ||||
| CsnOspfVirtIfStatusEntryIndex | 1.3.6.1.4.1.1991.1.2.4.13.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The table entry index of this Area. | ||||
| CsnOspfVirtIfStatusAreaID | 1.3.6.1.4.1.1991.1.2.4.13.1.1.2 | AreaID | RO | |
column · AreaID · read-only · current The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 | ||||
| CsnOspfVirtIfStatusNeighbor | 1.3.6.1.4.1.1991.1.2.4.13.1.1.3 | RouterID | RO | |
column · RouterID · read-only · current The Router ID of the Virtual Neighbor. | ||||
| CsnOspfVirtIfStatusTransitDelay | 1.3.6.1.4.1.1991.1.2.4.13.1.1.4 | UpToMaxAge | RO | |
column · UpToMaxAge · read-only · current The estimated number of seconds it takes to transmit a link- state update packet over this interface. | ||||
| CsnOspfVirtIfStatusRetransInterval | 1.3.6.1.4.1.1991.1.2.4.13.1.1.5 | UpToMaxAge | RO | |
column · UpToMaxAge · read-only · current The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. This value should be well over the expected round-trip time. | ||||
| CsnOspfVirtIfStatusHelloInterval | 1.3.6.1.4.1.1991.1.2.4.13.1.1.6 | HelloRange | RO | |
column · HelloRange · read-only · current The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor. | ||||
| CsnOspfVirtIfStatusRtrDeadInterval | 1.3.6.1.4.1.1991.1.2.4.13.1.1.7 | PositiveInteger | RO | |
column · PositiveInteger · read-only · current The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor. | ||||
| CsnOspfVirtIfStatusState | 1.3.6.1.4.1.1991.1.2.4.13.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The OSPF virtual interfaces states.
| ||||
| CsnOspfVirtIfStatusEvents | 1.3.6.1.4.1.1991.1.2.4.13.1.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The number of state changes or error events on this Virtual Link. | ||||
| CsnOspfVirtIfStatusAuthType | 1.3.6.1.4.1.1991.1.2.4.13.1.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis. | ||||
| CsnOspfVirtIfStatusAuthKey | 1.3.6.1.4.1.1991.1.2.4.13.1.1.11 | OCTET STRING (SIZE (0..8)) | RO | |
column · OCTET STRING (SIZE (0..8)) · read-only · current If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, snOspfVifAuthKey always returns a string of length zero. | ||||
| CsnOspfVirtIfStatusMd5AuthKeyId | 1.3.6.1.4.1.1991.1.2.4.13.1.1.12 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfVirtIfMd5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest appended to the OSPF packet. Key Identifiers are unique per-interface (or equivalently, per-subnet). | ||||
| CsnOspfVirtIfStatusMd5AuthKey | 1.3.6.1.4.1.1991.1.2.4.13.1.1.13 | OCTET STRING (SIZE (0..16)) | RO | |
column · OCTET STRING (SIZE (0..16)) · read-only · current The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an Octet String of length zero. | ||||
| CsnOspfVirtIfStatusMd5ActivationWaitTime | 1.3.6.1.4.1.1991.1.2.4.13.1.1.14 | INTEGER (0..14400) | RO | |
column · INTEGER (0..14400) · read-only · current The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). | ||||
| CsnOspfVirtIfStatusAreaIdFormat | 1.3.6.1.4.1.1991.1.2.4.13.1.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address.
| ||||
| NsnOspfRoutingInfo | 1.3.6.1.4.1.1991.1.2.4.14 | |||
| TsnOspfRoutingInfoTable | 1.3.6.1.4.1.1991.1.2.4.14.1 | NA | ||
table · not-accessible · current Information about this router's routing information. | ||||
| RsnOspfRoutingInfoEntry | 1.3.6.1.4.1.1991.1.2.4.14.1.1 | NA | ||
row · not-accessible · current Information about a single ABR/ASBR Routing entry. | ||||
| CsnOspfRoutingInfoIndex | 1.3.6.1.4.1.1991.1.2.4.14.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The table entry index of this Routing entry. | ||||
| CsnOspfRoutingInfoRouterID | 1.3.6.1.4.1.1991.1.2.4.14.1.1.2 | RouterID | RO | |
column · RouterID · read-only · current The Router ID of the destination router. | ||||
| CsnOspfRoutingInfoRouterType | 1.3.6.1.4.1.1991.1.2.4.14.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The Router type of the destination router as the following: abr (1) -- area border router. asbr (2) -- autonomous sytem border router. abrANDasbr(3) -- area border and autonomous system border router.
| ||||
| CsnOspfRoutingInfoNextHopRouterID | 1.3.6.1.4.1.1991.1.2.4.14.1.1.4 | RouterID | RO | |
column · RouterID · read-only · current The router ID of the next hop destination router. | ||||
| CsnOspfRoutingInfoOutgoingInterface | 1.3.6.1.4.1.1991.1.2.4.14.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The outgoing interface of the destination router. | ||||
| NsnOspfTrapControl | 1.3.6.1.4.1.1991.1.2.4.15 | |||
| SsnOspfSetTrap | 1.3.6.1.4.1.1991.1.2.4.15.1 | OCTET STRING (SIZE (4)) | RW | |
scalar · OCTET STRING (SIZE (4)) · read-write · current A four-octet string serving as a bit map for the trap events defined by the OSPF traps. This object is used to enable and disable specific OSPF traps where a 1 in the bit field represents enabled. The right-most bit (least significant) represents trap 0. | ||||
| SsnOspfConfigErrorType | 1.3.6.1.4.1.1991.1.2.4.15.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current Potential types of configuration conflicts. Used by the ospfConfigError and ospfConfigVir- tError traps.
| ||||
| SsnOspfPacketType | 1.3.6.1.4.1.1991.1.2.4.15.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current OSPF packet types.
| ||||
| SsnOspfPacketSrc | 1.3.6.1.4.1.1991.1.2.4.15.4 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of an inbound packet that can- not be identified by a neighbor instance. | ||||
| SsnOspfTrapsGenerationMode | 1.3.6.1.4.1.1991.1.2.4.15.5 | RtrStatus | RW | |
scalar · RtrStatus · read-write · current Indicates if the generation of any OSPF traps is permitted on the router. The value 'enabled' denotes that the OSPF Traps can be generated by the router; 'disabled' denotes that the OSPF Traps can not be generated by the router even when snOspfSetTrap indicates the generation of specific OSPF Traps. This object provides global control on the generation of ospf traps. | ||||
Textual conventions
AreaIDIpAddressThe Area ID, in OSPF, has the same format as an IP Address, but has the function of defining a summarization point for Link State Advertisements
BigMetricINTEGER (0..16777215)0..'FFFFFF'h
DesignatedRouterPriorityINTEGER (0..255)The range of ifIndex, i.e. (1..ifNumber) Potential Priorities for the Designated Router Election
HelloRangeINTEGER (1..65535)1..'FFFF'h
MetricINTEGER (0..65535)The OSPF Metric is defined as an unsigned value in the range 0..'FFFF'h
PositiveIntegerINTEGER (0..2147483647)0..'7FFFFFFF'h
RouterIDIpAddressThe Router ID, in OSPF, has the same format as an IP Address, but identifies the router independent of its IP Address.
RtrStatusINTEGERdisabled(0)enabled(1)RtrStatus Values
TOSTypeINTEGER (0..30)Type of Service is defined as a mapping to the IP Type of Service Flags as defined in the Router Requirements Document: Type of Service is defined as a mapping to the IP Type of Service Flags as defined in the IP Forwarding Table MIB +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30 The remaining values are left for future definition.
TruthValINTEGERfalse(0)true(1)Boolean Values
UpToMaxAgeINTEGER (0..3600)