FOUNDRY-SN-IPX-MIB
Brocade Communication Systems, Inc. (formerly 'Foundry Networks, Inc.')Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
snmptranslate -m FOUNDRY-SN-IPX-MIB -Tpsnmpwalk -v2c -c <community> -m FOUNDRY-SN-IPX-MIB <host> 1.3.6.1.4.1.1991.1.2.1Imports
| FOUNDRY-SN-ROOT-MIB | router |
|---|---|
| FOUNDRY-SN-SWITCH-GROUP-MIB | PhysAddress |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IsnIpx | 1.3.6.1.4.1.1991.1.2.1 | |||
identity Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | ||||
| NsnIpxGen | 1.3.6.1.4.1.1991.1.2.1.1 | |||
| SsnIpxRoutingMode | 1.3.6.1.4.1.1991.1.2.1.1.1 | RtrStatus | RW | |
scalar · RtrStatus · read-write · current Enabled/Disabled System IPX Routing Mode status. | ||||
| SsnIpxNetBiosFilterMode | 1.3.6.1.4.1.1991.1.2.1.1.2 | RtrStatus | RW | |
scalar · RtrStatus · read-write · current Enabled/Disabled NetBios Filter Mode status. | ||||
| SsnIpxClearCache | 1.3.6.1.4.1.1991.1.2.1.1.3 | ClearStatus | RW | |
scalar · ClearStatus · read-write · current clear(1) will clear cache table. | ||||
| SsnIpxClearRoute | 1.3.6.1.4.1.1991.1.2.1.1.4 | ClearStatus | RW | |
scalar · ClearStatus · read-write · current clear(1) will clear ipx route table. | ||||
| SsnIpxClearTrafficCnts | 1.3.6.1.4.1.1991.1.2.1.1.5 | ClearStatus | RW | |
scalar · ClearStatus · read-write · current clear(1) will clear ipx all traffic counters. - snIpxRcvPktsCnt, snIpxFwdPktsCnt, snIpxRcvDropPktsCnt, snIpxTxDropPktsCnt, snIpxRcvFiltPktsCnt, snIpxTxFiltPktsCnt. | ||||
| SsnIpxRcvPktsCnt | 1.3.6.1.4.1.1991.1.2.1.1.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current IPX incoming packets counter. | ||||
| SsnIpxTxPktsCnt | 1.3.6.1.4.1.1991.1.2.1.1.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current IPX Outgoing packets counter. | ||||
| SsnIpxFwdPktsCnt | 1.3.6.1.4.1.1991.1.2.1.1.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current IPX forwarding packets counter. | ||||
| SsnIpxRcvDropPktsCnt | 1.3.6.1.4.1.1991.1.2.1.1.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current IPX receiving drop packets counter. | ||||
| SsnIpxRcvFiltPktsCnt | 1.3.6.1.4.1.1991.1.2.1.1.10 | Counter32 | RO | |
scalar · Counter32 · read-only · current IPX receiving filter packets counter. | ||||
| SsnIpxRipGblFiltList | 1.3.6.1.4.1.1991.1.2.1.1.11 | OCTET STRING (SIZE (0..32)) | RW | |
scalar · OCTET STRING (SIZE (0..32)) · read-write · current An IPX RIP Global Filter List. Null value indicates no filter list. | ||||
| SsnIpxRipFiltOnAllPort | 1.3.6.1.4.1.1991.1.2.1.1.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Apply the IPX RIP Global filter list snIpxRipGblFiltList to all interfaces. This object is used to add all RIP filter lists and delete all RIP filter lists to/from all ports. Prior to sending this command, snIpxRipGblFiltList must be ready. The values that can be written are: deleteAllInBound(2)...delete all in-bound filter lists from all ports. deleteAllOutBound(3)..delete all out-bound filter lists from all ports. addAllInBound(4)......add all in-bound filter lists to all ports. addAllOutBound(5).....add all out-bound filter lists to all ports. If set operation is failed, then a SET with value of (2)or(3) returns error 'GenError'. Deleted(2)&(3) go away immediately. The following values can be returned on reads: noSuch(0)...no such operation yet. valid(1)....set operation is done and is valid
| ||||
| SsnIpxSapGblFiltList | 1.3.6.1.4.1.1991.1.2.1.1.13 | OCTET STRING (SIZE (0..32)) | RW | |
scalar · OCTET STRING (SIZE (0..32)) · read-write · current An IPX SAP Global Filter List. Null value indicates no filter list | ||||
| SsnIpxSapFiltOnAllPort | 1.3.6.1.4.1.1991.1.2.1.1.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current Apply the IPX SAP Global filter list snIpxSapGblFiltList to all interfaces. This object is used to add all RIP filter lists and delete all SAP filter lists to/from all ports. Prior to sending this command, snIpxSapGblFiltList must be ready. The values that can be written are: deleteAllInBound(2)...delete all in-bound filter lists from all ports. deleteAllOutBound(3)..delete all out-bound filter lists from all ports. addAllInBound(4)......add all in-bound filter lists to all ports. addAllOutBound(5).....add all out-bound filter lists to all ports. If set operation is failed, then a SET with value of (2)or(3) returns error 'GenError'. Deleted(2)&(3) go away immediately. The following values can be returned on reads: noSuch(0)...no such operation yet. valid(1)....set operation is done and is valid
| ||||
| SsnIpxTxDropPktsCnt | 1.3.6.1.4.1.1991.1.2.1.1.15 | Counter32 | RO | |
scalar · Counter32 · read-only · current IPX transmitting drop packets counter. | ||||
| SsnIpxTxFiltPktsCnt | 1.3.6.1.4.1.1991.1.2.1.1.16 | Counter32 | RO | |
scalar · Counter32 · read-only · current IPX transmitting filter packets counter. | ||||
| NsnIpxCache | 1.3.6.1.4.1.1991.1.2.1.2 | |||
| TsnIpxCacheTable | 1.3.6.1.4.1.1991.1.2.1.2.1 | NA | ||
table · not-accessible · current IPX Cache table. | ||||
| RsnIpxCacheEntry | 1.3.6.1.4.1.1991.1.2.1.2.1.1 | NA | ||
| CsnIpxCacheIndex | 1.3.6.1.4.1.1991.1.2.1.2.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The table index for a IPX Cache entry. | ||||
| CsnIpxCacheNetNum | 1.3.6.1.4.1.1991.1.2.1.2.1.1.2 | NetNumber | RO | |
column · NetNumber · read-only · current Cache Network number. | ||||
| CsnIpxCacheNode | 1.3.6.1.4.1.1991.1.2.1.2.1.1.3 | PhysAddress | RO | |
column · PhysAddress · read-only · current Cache Node Number. | ||||
| CsnIpxCacheOutFilter | 1.3.6.1.4.1.1991.1.2.1.2.1.1.4 | RtrStatus | RO | |
column · RtrStatus · read-only · current Cache Outbound Filter is ether disabled(0) or enabled(1). | ||||
| CsnIpxCacheEncap | 1.3.6.1.4.1.1991.1.2.1.2.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The IPX encapsulation frame type.
| ||||
| CsnIpxCachePort | 1.3.6.1.4.1.1991.1.2.1.2.1.1.6 | PortIndex | RO | |
column · PortIndex · read-only · current IPX Router Port number. | ||||
| NsnIpxRoute | 1.3.6.1.4.1.1991.1.2.1.3 | |||
| TsnIpxRouteTable | 1.3.6.1.4.1.1991.1.2.1.3.1 | NA | ||
table · not-accessible · current IPX route table. | ||||
| RsnIpxRouteEntry | 1.3.6.1.4.1.1991.1.2.1.3.1.1 | NA | ||
| CsnIpxRouteIndex | 1.3.6.1.4.1.1991.1.2.1.3.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The table index for a IPX route entry. | ||||
| CsnIpxDestNetNum | 1.3.6.1.4.1.1991.1.2.1.3.1.1.2 | NetNumber | RO | |
column · NetNumber · read-only · current Destination Network number. | ||||
| CsnIpxFwdRouterNode | 1.3.6.1.4.1.1991.1.2.1.3.1.1.3 | PhysAddress | RO | |
column · PhysAddress · read-only · current Forward Router Node Number. | ||||
| CsnIpxDestHopCnts | 1.3.6.1.4.1.1991.1.2.1.3.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Number of hops to reach the destination. | ||||
| CsnIpxRouteMetric | 1.3.6.1.4.1.1991.1.2.1.3.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The metrics to next hop router. | ||||
| CsnIpxDestPort | 1.3.6.1.4.1.1991.1.2.1.3.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The destination port. | ||||
| NsnIpxServer | 1.3.6.1.4.1.1991.1.2.1.4 | |||
| TsnIpxServerTable | 1.3.6.1.4.1.1991.1.2.1.4.1 | NA | ||
table · not-accessible · current IPX Server table. | ||||
| RsnIpxServerEntry | 1.3.6.1.4.1.1991.1.2.1.4.1.1 | NA | ||
| CsnIpxServerIndex | 1.3.6.1.4.1.1991.1.2.1.4.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The table index for a IPX Server entry. | ||||
| CsnIpxServerType | 1.3.6.1.4.1.1991.1.2.1.4.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current IPX Server Type. | ||||
| CsnIpxServerNetNum | 1.3.6.1.4.1.1991.1.2.1.4.1.1.3 | NetNumber | RO | |
column · NetNumber · read-only · current Server Network number. | ||||
| CsnIpxServerNode | 1.3.6.1.4.1.1991.1.2.1.4.1.1.4 | PhysAddress | RO | |
column · PhysAddress · read-only · current Server Node Number. | ||||
| CsnIpxServerSocket | 1.3.6.1.4.1.1991.1.2.1.4.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Server Socket Number. | ||||
| CsnIpxServerHopCnts | 1.3.6.1.4.1.1991.1.2.1.4.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current Number of intervening networks to reach the server. | ||||
| CsnIpxServerName | 1.3.6.1.4.1.1991.1.2.1.4.1.1.7 | OCTET STRING (SIZE (0..47)) | RO | |
column · OCTET STRING (SIZE (0..47)) · read-only · current IPX Server Name. | ||||
| NsnIpxFwdFilter | 1.3.6.1.4.1.1991.1.2.1.5 | |||
| TsnIpxFwdFilterTable | 1.3.6.1.4.1.1991.1.2.1.5.1 | NA | ||
table · not-accessible · current IPX Forward Filter table. | ||||
| RsnIpxFwdFilterEntry | 1.3.6.1.4.1.1991.1.2.1.5.1.1 | NA | ||
| CsnIpxFwdFilterIdx | 1.3.6.1.4.1.1991.1.2.1.5.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The filter ID for a filter entry. | ||||
| CsnIpxFwdFilterAction | 1.3.6.1.4.1.1991.1.2.1.5.1.1.2 | Action | RW | |
column · Action · read-write · current Action to take if the ipx packet match with this filter. | ||||
| CsnIpxFwdFilterSocket | 1.3.6.1.4.1.1991.1.2.1.5.1.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current IPX Forward Filter Socket Number. | ||||
| CsnIpxFwdFilterSrcNet | 1.3.6.1.4.1.1991.1.2.1.5.1.1.4 | NetNumber | RW | |
column · NetNumber · read-write · current Source Network Number. | ||||
| CsnIpxFwdFilterSrcNode | 1.3.6.1.4.1.1991.1.2.1.5.1.1.5 | PhysAddress | RW | |
column · PhysAddress · read-write · current Source Node Number. | ||||
| CsnIpxFwdFilterDestNet | 1.3.6.1.4.1.1991.1.2.1.5.1.1.6 | NetNumber | RW | |
column · NetNumber · read-write · current Destination Network Number. | ||||
| CsnIpxFwdFilterDestNode | 1.3.6.1.4.1.1991.1.2.1.5.1.1.7 | PhysAddress | RW | |
column · PhysAddress · read-write · current Destination Node Number. | ||||
| CsnIpxFwdFilterRowStatus | 1.3.6.1.4.1.1991.1.2.1.5.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| ||||
| NsnIpxRipFilter | 1.3.6.1.4.1.1991.1.2.1.6 | |||
| TsnIpxRipFilterTable | 1.3.6.1.4.1.1991.1.2.1.6.1 | NA | ||
table · not-accessible · current IPX RIP Filter table. | ||||
| RsnIpxRipFilterEntry | 1.3.6.1.4.1.1991.1.2.1.6.1.1 | NA | ||
| CsnIpxRipFilterId | 1.3.6.1.4.1.1991.1.2.1.6.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The filter ID for a filter entry. | ||||
| CsnIpxRipFilterAction | 1.3.6.1.4.1.1991.1.2.1.6.1.1.2 | Action | RW | |
column · Action · read-write · current Action to take if the ipx packet match with this filter. | ||||
| CsnIpxRipFilterNet | 1.3.6.1.4.1.1991.1.2.1.6.1.1.3 | NetNumber | RW | |
column · NetNumber · read-write · current IPX RIP Filter Network number. | ||||
| CsnIpxRipFilterMask | 1.3.6.1.4.1.1991.1.2.1.6.1.1.4 | NetNumber | RW | |
column · NetNumber · read-write · current IPX RIP Filter Network/Subnet Mask. | ||||
| CsnIpxRipFilterRowStatus | 1.3.6.1.4.1.1991.1.2.1.6.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| ||||
| NsnIpxSapFilter | 1.3.6.1.4.1.1991.1.2.1.7 | |||
| TsnIpxSapFilterTable | 1.3.6.1.4.1.1991.1.2.1.7.1 | NA | ||
table · not-accessible · current IPX SAP Filter table. | ||||
| RsnIpxSapFilterEntry | 1.3.6.1.4.1.1991.1.2.1.7.1.1 | NA | ||
| CsnIpxSapFilterId | 1.3.6.1.4.1.1991.1.2.1.7.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The filter ID for a filter entry. | ||||
| CsnIpxSapFilterAction | 1.3.6.1.4.1.1991.1.2.1.7.1.1.2 | Action | RW | |
column · Action · read-write · current Action to take if the ipx packet match with this filter. | ||||
| CsnIpxSapFilterType | 1.3.6.1.4.1.1991.1.2.1.7.1.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current IPX SAP Filter type to be matched. | ||||
| CsnIpxSapFilterName | 1.3.6.1.4.1.1991.1.2.1.7.1.1.4 | OCTET STRING (SIZE (0..47)) | RW | |
column · OCTET STRING (SIZE (0..47)) · read-write · current IPX SAP Filter Name. | ||||
| CsnIpxSapFilterRowStatus | 1.3.6.1.4.1.1991.1.2.1.7.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| ||||
| NsnIpxIfFwdAccess | 1.3.6.1.4.1.1991.1.2.1.8 | |||
| TsnIpxIfFwdAccessTable | 1.3.6.1.4.1.1991.1.2.1.8.1 | NA | ||
table · not-accessible · current IPX IF Forward Access table. | ||||
| RsnIpxIfFwdAccessEntry | 1.3.6.1.4.1.1991.1.2.1.8.1.1 | NA | ||
row · not-accessible · current An entry in the IPX Forward Access table. | ||||
| CsnIpxIfFwdAccessPort | 1.3.6.1.4.1.1991.1.2.1.8.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The IPX interface to which the Forward Filter applies. | ||||
| CsnIpxIfFwdAccessDir | 1.3.6.1.4.1.1991.1.2.1.8.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The access direction of incoming packet filter or outgoing packet filter.
| ||||
| CsnIpxIfFwdAccessFilterList | 1.3.6.1.4.1.1991.1.2.1.8.1.1.3 | OCTET STRING (SIZE (1..32)) | RW | |
column · OCTET STRING (SIZE (1..32)) · read-write · current An IPX IF Forward Filter List. | ||||
| CsnIpxIfFwdAccessRowStatus | 1.3.6.1.4.1.1991.1.2.1.8.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| ||||
| NsnIpxIfRipAccess | 1.3.6.1.4.1.1991.1.2.1.9 | |||
| TsnIpxIfRipAccessTable | 1.3.6.1.4.1.1991.1.2.1.9.1 | NA | ||
table · not-accessible · current IPX IF RIP Access table. | ||||
| RsnIpxIfRipAccessEntry | 1.3.6.1.4.1.1991.1.2.1.9.1.1 | NA | ||
row · not-accessible · current An entry in the IPX Forward Access table. | ||||
| CsnIpxIfRipAccessPort | 1.3.6.1.4.1.1991.1.2.1.9.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The IPX interface to which the RIP Filter applies. | ||||
| CsnIpxIfRipAccessDir | 1.3.6.1.4.1.1991.1.2.1.9.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The access direction of incoming packet filter or outgoing packet filter.
| ||||
| CsnIpxIfRipAccessFilterList | 1.3.6.1.4.1.1991.1.2.1.9.1.1.3 | OCTET STRING (SIZE (1..32)) | RW | |
column · OCTET STRING (SIZE (1..32)) · read-write · current An IPX IF RIP Access Filter List. | ||||
| CsnIpxIfRipAccessRowStatus | 1.3.6.1.4.1.1991.1.2.1.9.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| ||||
| NsnIpxIfSapAccess | 1.3.6.1.4.1.1991.1.2.1.10 | |||
| TsnIpxIfSapAccessTable | 1.3.6.1.4.1.1991.1.2.1.10.1 | NA | ||
table · not-accessible · current IPX IF RIP Access table. | ||||
| RsnIpxIfSapAccessEntry | 1.3.6.1.4.1.1991.1.2.1.10.1.1 | NA | ||
row · not-accessible · current An entry in the IPX Forward Access table. | ||||
| CsnIpxIfSapAccessPort | 1.3.6.1.4.1.1991.1.2.1.10.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The IPX interface to which the SAP Filter applies. | ||||
| CsnIpxIfSapAccessDir | 1.3.6.1.4.1.1991.1.2.1.10.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The access direction of incoming packet filter or outgoing packet filter.
| ||||
| CsnIpxIfSapAccessFilterList | 1.3.6.1.4.1.1991.1.2.1.10.1.1.3 | OCTET STRING (SIZE (1..32)) | RW | |
column · OCTET STRING (SIZE (1..32)) · read-write · current An IPX IF SAP Access Filter List. | ||||
| CsnIpxIfSapAccessRowStatus | 1.3.6.1.4.1.1991.1.2.1.10.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| ||||
| NsnIpxPortAddr | 1.3.6.1.4.1.1991.1.2.1.11 | |||
| TsnIpxPortAddrTable | 1.3.6.1.4.1.1991.1.2.1.11.1 | NA | ||
table · not-accessible · current IPX port address table. | ||||
| RsnIpxPortAddrEntry | 1.3.6.1.4.1.1991.1.2.1.11.1.1 | NA | ||
row · not-accessible · current An entry in the IPX Port Address table. | ||||
| CsnIpxPortAddrPort | 1.3.6.1.4.1.1991.1.2.1.11.1.1.1 | PortIndex | RO | |
column · PortIndex · read-only · current The port index for port address entry. | ||||
| CsnIpxPortAddrEncap | 1.3.6.1.4.1.1991.1.2.1.11.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The IPX encapsulation type. ethernet8022(1), ethernet8023(2), ethernetII(3), ethernetSnap(4) Note: Each Network Number can be assigned with one unique Frame type; Otherwise, a SNMP-SET error will be returned.
| ||||
| CsnIpxPortAddrNetNum | 1.3.6.1.4.1.1991.1.2.1.11.1.1.3 | NetNumber | RW | |
column · NetNumber · read-write · current An unique Network number for the IPX interface port. | ||||
| CsnIpxPortAddrRowStatus | 1.3.6.1.4.1.1991.1.2.1.11.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| ||||
| CsnIpxPortAddrNetBiosFilterMode | 1.3.6.1.4.1.1991.1.2.1.11.1.1.5 | RtrStatus | RW | |
column · RtrStatus · read-write · current Enabled/Disabled NetBios Filter Mode status per Port Address entry. | ||||
| NsnIpxPortCounters | 1.3.6.1.4.1.1991.1.2.1.12 | |||
| TsnIpxPortCountersTable | 1.3.6.1.4.1.1991.1.2.1.12.1 | NA | ||
table · not-accessible · current IPX port Counters table. | ||||
| RsnIpxPortCountersEntry | 1.3.6.1.4.1.1991.1.2.1.12.1.1 | NA | ||
| CsnIpxPortCountersPort | 1.3.6.1.4.1.1991.1.2.1.12.1.1.1 | PortIndex | RO | |
column · PortIndex · read-only · current The port index for port Counters entry. | ||||
| CsnIpxPortCountersRcvPktsCnt | 1.3.6.1.4.1.1991.1.2.1.12.1.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current IPX incoming packets counter for the interface. | ||||
| CsnIpxPortCountersTxPktsCnt | 1.3.6.1.4.1.1991.1.2.1.12.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current IPX Outgoing packets counter for the interface. | ||||
| CsnIpxPortCountersFwdPktsCnt | 1.3.6.1.4.1.1991.1.2.1.12.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current IPX forwarding packets counter for the interface. | ||||
| CsnIpxPortCountersRcvDropPktsCnt | 1.3.6.1.4.1.1991.1.2.1.12.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current IPX receiving drop packets counter for the interface. | ||||
| CsnIpxPortCountersTxDropPktsCnt | 1.3.6.1.4.1.1991.1.2.1.12.1.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current IPX transmitting drop packets counter for the interface. | ||||
| CsnIpxPortCountersRcvFiltPktsCnt | 1.3.6.1.4.1.1991.1.2.1.12.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current IPX receiving filter packets counter for the interface. | ||||
| CsnIpxPortCountersTxFiltPktsCnt | 1.3.6.1.4.1.1991.1.2.1.12.1.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current IPX transmitting filter packets counter for the interface. | ||||
Textual conventions
ActionINTEGERdeny(0)permit(1)Represents a action value such as deny or permit.
ClearStatusINTEGERclear(1)normal(0)Clear Status Values
NetNumberOCTET STRING (SIZE (4))PortIndexInteger32 (1..3900)The bits 0-7 = port number. The bits 8-15 = slot number (slot for chassis only). ve port format bits 16-24 = 0x01, bits 0-15 = ve number loopback port format bits 16-24 = 0x02, bits 0-15= lb number
RtrStatusINTEGERdisabled(0)enabled(1)RtrStatus Values