FOUNDRY-SN-BGP4-GROUP-MIB
Brocade Communication Systems, Inc. (formerly 'Foundry Networks, Inc.')Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
snmptranslate -m FOUNDRY-SN-BGP4-GROUP-MIB -Tpsnmpwalk -v2c -c <community> -m FOUNDRY-SN-BGP4-GROUP-MIB <host> 1.3.6.1.4.1.1991.1.2.11Imports
| FOUNDRY-SN-ROOT-MIB | router |
|---|---|
| INET-ADDRESS-MIB | InetAutonomousSystemNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IsnBgp4 | 1.3.6.1.4.1.1991.1.2.11 | |||
identity Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | ||||
| NsnBgp4Gen | 1.3.6.1.4.1.1991.1.2.11.1 | |||
| SsnBgp4GenAlwaysCompareMed | 1.3.6.1.4.1.1991.1.2.11.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current To enable/disable the comparison of the Multi-Exit Discriminator for paths from neighbors in different AS.
| ||||
| SsnBgp4GenAutoSummary | 1.3.6.1.4.1.1991.1.2.11.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current To enable/disable the default behavior of automatic summarization of subnet routes into network-level routes.
| ||||
| SsnBgp4GenDefaultLocalPreference | 1.3.6.1.4.1.1991.1.2.11.1.3 | Integer32 | RW | deprecated |
scalar · Integer32 · read-write · deprecated To set the default local preference attribute.This is deprecated and snBgp4GenDefaultLocalPreference1 is introduced. | ||||
| SsnBgp4GenDefaultInfoOriginate | 1.3.6.1.4.1.1991.1.2.11.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current To enable/disable the default Information Originate.
| ||||
| SsnBgp4GenFastExternalFallover | 1.3.6.1.4.1.1991.1.2.11.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current To enable/disable an action of immediately reset the BGP sessions of any directly adjacent external neighbors if the link used to reach them goes down.
| ||||
| SsnBgp4GenNextBootNeighbors | 1.3.6.1.4.1.1991.1.2.11.1.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current The next-boot configured number of neighbors in a BGP Peer Group. The minimum value of this MIB is snBgp4GenMinNeighbors. The maximum value of this MIB is snBgp4GenMaxNeighbors. | ||||
| SsnBgp4GenNextBootRoutes | 1.3.6.1.4.1.1991.1.2.11.1.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The next-boot configured number of Routes. The minimum value of this MIB is snBgp4GenMinRoutes. The maximum value of this MIB is snBgp4GenMaxRoutes. | ||||
| SsnBgp4GenSynchronization | 1.3.6.1.4.1.1991.1.2.11.1.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current To enable/disable the synchronization between BGP and your IGP.
| ||||
| SsnBgp4GenKeepAliveTime | 1.3.6.1.4.1.1991.1.2.11.1.9 | INTEGER (0..65535) | RW | |
scalar · INTEGER (0..65535) · read-write · current The Keep alive timer. | ||||
| SsnBgp4GenHoldTime | 1.3.6.1.4.1.1991.1.2.11.1.10 | INTEGER (0..65535) | RW | |
scalar · INTEGER (0..65535) · read-write · current The Hold time timer. | ||||
| SsnBgp4GenRouterId | 1.3.6.1.4.1.1991.1.2.11.1.11 | IpAddress | RW | |
scalar · IpAddress · read-write · current BGP Router Id. | ||||
| SsnBgp4GenTableMap | 1.3.6.1.4.1.1991.1.2.11.1.12 | OCTET STRING (SIZE (0..32)) | RW | |
scalar · OCTET STRING (SIZE (0..32)) · read-write · current An octet string of the route-map name, each character of the name is represented by one octet. | ||||
| SsnBgp4GenAdminStat | 1.3.6.1.4.1.1991.1.2.11.1.13 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative status of BGP4 in the router. The value 'enabled' denotes that the BGP4 routing is active in this router; 'disabled' disables BGP4 routing on this router.
| ||||
| SsnBgp4GenDefaultMetric | 1.3.6.1.4.1.1991.1.2.11.1.14 | Integer32 | RW | deprecated |
scalar · Integer32 · read-write · deprecated To set default metric values for the BGP4 protocol.This is deprecated and snBgp4GenDefaultMetric1 is introduced. | ||||
| SsnBgp4GenMaxNeighbors | 1.3.6.1.4.1.1991.1.2.11.1.15 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of neighbors can be configured in a BGP Peer Group. | ||||
| SsnBgp4GenMinNeighbors | 1.3.6.1.4.1.1991.1.2.11.1.16 | Integer32 | RO | |
scalar · Integer32 · read-only · current The minimum number of neighbors can be configured in a BGP Peer Group. | ||||
| SsnBgp4GenMaxRoutes | 1.3.6.1.4.1.1991.1.2.11.1.17 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum configured number of Routes. | ||||
| SsnBgp4GenMinRoutes | 1.3.6.1.4.1.1991.1.2.11.1.18 | Integer32 | RO | |
scalar · Integer32 · read-only · current The minimum configured number of Routes. | ||||
| SsnBgp4GenMaxAddrFilters | 1.3.6.1.4.1.1991.1.2.11.1.19 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum configured number of BGP4 address filters. | ||||
| SsnBgp4GenMaxAggregateAddresses | 1.3.6.1.4.1.1991.1.2.11.1.20 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum configured number of BGP4 aggregate addresses. | ||||
| SsnBgp4GenMaxAsPathFilters | 1.3.6.1.4.1.1991.1.2.11.1.21 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum configured number of BGP4 AS-PATH filters. | ||||
| SsnBgp4GenMaxCommunityFilters | 1.3.6.1.4.1.1991.1.2.11.1.22 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum configured number of BGP4 Community filters. | ||||
| SsnBgp4GenMaxNetworks | 1.3.6.1.4.1.1991.1.2.11.1.23 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum configured number of BGP4 Networks. | ||||
| SsnBgp4GenMaxRouteMapFilters | 1.3.6.1.4.1.1991.1.2.11.1.24 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum configured number of BGP4 Route-map Filters. | ||||
| SsnBgp4GenNeighPrefixMinValue | 1.3.6.1.4.1.1991.1.2.11.1.25 | Integer32 | RO | |
scalar · Integer32 · read-only · current The minimum configured value of BGP4 Neighbor Prefix. | ||||
| SsnBgp4GenOperNeighbors | 1.3.6.1.4.1.1991.1.2.11.1.26 | Integer32 | RO | |
scalar · Integer32 · read-only · current The current operational max number of neighbors configured for a BGP Group. | ||||
| SsnBgp4GenOperRoutes | 1.3.6.1.4.1.1991.1.2.11.1.27 | Integer32 | RO | |
scalar · Integer32 · read-only · current The current operational number of Routes. | ||||
| SsnBgp4GenLocalAs | 1.3.6.1.4.1.1991.1.2.11.1.28 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current Bgp4 local autonomous system number. | ||||
| SsnBgp4GenRoutesInstalled | 1.3.6.1.4.1.1991.1.2.11.1.29 | Integer32 | RO | |
scalar · Integer32 · read-only · current Bgp4 installed routes. | ||||
| SsnBgp4GenAsPathInstalled | 1.3.6.1.4.1.1991.1.2.11.1.30 | Integer32 | RO | |
scalar · Integer32 · read-only · current Bgp4 installed autonomous system path. | ||||
| SsnBgp4ExternalDistance | 1.3.6.1.4.1.1991.1.2.11.1.31 | INTEGER (1..255) | RW | |
scalar · INTEGER (1..255) · read-write · current Administrative distance for BGP external routes. | ||||
| SsnBgp4InternalDistance | 1.3.6.1.4.1.1991.1.2.11.1.32 | INTEGER (1..255) | RW | |
scalar · INTEGER (1..255) · read-write · current Administrative distance for BGP internal routes. | ||||
| SsnBgp4LocalDistance | 1.3.6.1.4.1.1991.1.2.11.1.33 | INTEGER (1..255) | RW | |
scalar · INTEGER (1..255) · read-write · current Administrative distance for BGP local routes. | ||||
| SsnBgp4OperNumOfAttributes | 1.3.6.1.4.1.1991.1.2.11.1.34 | Integer32 | RO | |
scalar · Integer32 · read-only · current The operational number of attribute entries. | ||||
| SsnBgp4NextBootMaxAttributes | 1.3.6.1.4.1.1991.1.2.11.1.35 | INTEGER (200..30000) | RW | |
scalar · INTEGER (200..30000) · read-write · current The next boot maximum attribute entries. 10000 means reset to default. | ||||
| SsnBgp4ClusterId | 1.3.6.1.4.1.1991.1.2.11.1.36 | Integer32 | RW | |
scalar · Integer32 · read-write · current A cluster ID which is represented by 4 bytes unsigned integer (0..0xFFFFFFFF). 0 means reset to default. | ||||
| SsnBgp4ClientToClientReflection | 1.3.6.1.4.1.1991.1.2.11.1.37 | INTEGER | RW | |
scalar · INTEGER · read-write · current To enable/disable the client to client reflection in BGP4.
| ||||
| SsnBgp4GenTotalNeighbors | 1.3.6.1.4.1.1991.1.2.11.1.38 | Integer32 | RO | |
scalar · Integer32 · read-only · current The current total number of neighbors running in a BGP Group. | ||||
| SsnBgp4GenMaxPaths | 1.3.6.1.4.1.1991.1.2.11.1.39 | INTEGER (1..8) | RW | |
scalar · INTEGER (1..8) · read-write · current The maximum configured number of Paths. | ||||
| SsnBgp4GenConfedId | 1.3.6.1.4.1.1991.1.2.11.1.40 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current Bgp4 Confederation Id. | ||||
| SsnBgp4GenConfedPeers | 1.3.6.1.4.1.1991.1.2.11.1.41 | OCTET STRING (SIZE (0..100)) | RW | |
scalar · OCTET STRING (SIZE (0..100)) · read-write · current An AS number from 1 to 0xFFFF construct confederation peers. There are 50(max peers) of them. This integer number is represented by 2 OCTETs. | ||||
| SsnBgp4GenDampening | 1.3.6.1.4.1.1991.1.2.11.1.42 | INTEGER | RW | |
scalar · INTEGER · read-write · current The dampening of BGP4 in the router. value 'none' denotes that the BGP4 dampening is off 'parameters' denotes parameters are confibrurable. 'routeMap' denotes routemap is configurable.
| ||||
| SsnBgp4GenDampenHalfLife | 1.3.6.1.4.1.1991.1.2.11.1.43 | INTEGER (1..45) | RW | |
scalar · INTEGER (1..45) · read-write · current Bgp4 Dampening Half Life. | ||||
| SsnBgp4GenDampenReuse | 1.3.6.1.4.1.1991.1.2.11.1.44 | INTEGER (1..20000) | RW | |
scalar · INTEGER (1..20000) · read-write · current Bgp4 Dampening Reuse. | ||||
| SsnBgp4GenDampenSuppress | 1.3.6.1.4.1.1991.1.2.11.1.45 | INTEGER (1..20000) | RW | |
scalar · INTEGER (1..20000) · read-write · current Bgp4 Dampening Suppress. | ||||
| SsnBgp4GenDampenMaxSuppress | 1.3.6.1.4.1.1991.1.2.11.1.46 | INTEGER (1..20000) | RW | |
scalar · INTEGER (1..20000) · read-write · current Bgp4 Dampening Max Suppress Time. | ||||
| SsnBgp4GenDampenMap | 1.3.6.1.4.1.1991.1.2.11.1.47 | OCTET STRING (SIZE (0..32)) | RW | |
scalar · OCTET STRING (SIZE (0..32)) · read-write · current An octet string of the route-map name for dampening, each character of the name is represented by one octet. | ||||
| SsnBgp4GenLocalAs4 | 1.3.6.1.4.1.1991.1.2.11.1.48 | InetAutonomousSystemNumber | RW | |
scalar · InetAutonomousSystemNumber · read-write · current BGP4 local autonomous system (AS) number to support 4 byte AS format. | ||||
| SsnBgp4GenDefaultMetric1 | 1.3.6.1.4.1.1991.1.2.11.1.49 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current To set default metric values for the BGP4 protocol. | ||||
| SsnBgp4GenDefaultLocalPreference1 | 1.3.6.1.4.1.1991.1.2.11.1.50 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current To set the default local preference attribute. | ||||
| NsnBgp4AddrFilter | 1.3.6.1.4.1.1991.1.2.11.2 | |||
| TsnBgp4AddrFilterTable | 1.3.6.1.4.1.1991.1.2.11.2.1 | NA | ||
table · not-accessible · current Bgp4 Address Filter table. | ||||
| RsnBgp4AddrFilterEntry | 1.3.6.1.4.1.1991.1.2.11.2.1.1 | NA | ||
| CsnBgp4AddrFilterIndex | 1.3.6.1.4.1.1991.1.2.11.2.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The table index for a filter entry. | ||||
| CsnBgp4AddrFilterAction | 1.3.6.1.4.1.1991.1.2.11.2.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Action to take if the bgp address match with this filter.
| ||||
| CsnBgp4AddrFilterSourceIp | 1.3.6.1.4.1.1991.1.2.11.2.1.1.3 | IpAddress | RW | |
column · IpAddress · read-write · current Source IP address. | ||||
| CsnBgp4AddrFilterSourceMask | 1.3.6.1.4.1.1991.1.2.11.2.1.1.4 | IpAddress | RW | |
column · IpAddress · read-write · current Source IP subnet mask. | ||||
| CsnBgp4AddrFilterDestIp | 1.3.6.1.4.1.1991.1.2.11.2.1.1.5 | IpAddress | RW | |
column · IpAddress · read-write · current Destination IP address. | ||||
| CsnBgp4AddrFilterDestMask | 1.3.6.1.4.1.1991.1.2.11.2.1.1.6 | IpAddress | RW | |
column · IpAddress · read-write · current Destination IP subnet mask. | ||||
| CsnBgp4AddrFilterRowStatus | 1.3.6.1.4.1.1991.1.2.11.2.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| ||||
| NsnBgp4AggregateAddr | 1.3.6.1.4.1.1991.1.2.11.3 | |||
| TsnBgp4AggregateAddrTable | 1.3.6.1.4.1.1991.1.2.11.3.1 | NA | ||
table · not-accessible · current Bgp4 Aggregate Address table. | ||||
| RsnBgp4AggregateAddrEntry | 1.3.6.1.4.1.1991.1.2.11.3.1.1 | NA | ||
row · not-accessible · current An entry in the Bgp4 Aggregate Address table. | ||||
| CsnBgp4AggregateAddrIp | 1.3.6.1.4.1.1991.1.2.11.3.1.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current Aggregate Address IP address. | ||||
| CsnBgp4AggregateAddrMask | 1.3.6.1.4.1.1991.1.2.11.3.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current Aggregate Address IP subnet mask. | ||||
| CsnBgp4AggregateAddrOption | 1.3.6.1.4.1.1991.1.2.11.3.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current address(1), asSet(2), summaryOnly(3), the suppressMap(4), advertiseMap(5), attributeMap(6) are Options for creating an aggregate entry in a BGP routing table.
| ||||
| CsnBgp4AggregateAddrMap | 1.3.6.1.4.1.1991.1.2.11.3.1.1.4 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current This object associates with the snBgp4AggregateAddrOption and the suppressMap(4), advertiseMap(5), attributeMap(6) of the snBgp4AggregateAddrOption are only two Options for creating an aggregate address map. A SNMP-SET error will be returned for other options. An octet string of the map name, each character of the name is represented by one octet. | ||||
| CsnBgp4AggregateAddrRowStatus | 1.3.6.1.4.1.1991.1.2.11.3.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| ||||
| NsnBgp4AsPathFilter | 1.3.6.1.4.1.1991.1.2.11.4 | |||
| TsnBgp4AsPathFilterTable | 1.3.6.1.4.1.1991.1.2.11.4.1 | NA | ||
table · not-accessible · current Bgp4 AS-Path Filter table. | ||||
| RsnBgp4AsPathFilterEntry | 1.3.6.1.4.1.1991.1.2.11.4.1.1 | NA | ||
row · not-accessible · current An entry in the Bgp4 As-path Filter table. | ||||
| CsnBgp4AsPathFilterIndex | 1.3.6.1.4.1.1991.1.2.11.4.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The table index for a filter entry. | ||||
| CsnBgp4AsPathFilterAction | 1.3.6.1.4.1.1991.1.2.11.4.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Action to take if the bgp address match with this filter.
| ||||
| CsnBgp4AsPathFilterRegExpression | 1.3.6.1.4.1.1991.1.2.11.4.1.1.3 | OCTET STRING (SIZE (0..256)) | RW | |
column · OCTET STRING (SIZE (0..256)) · read-write · current Autonomous system in the filter using a regular expression. Each character of the regular expression string is represented by one octet. | ||||
| CsnBgp4AsPathFilterRowStatus | 1.3.6.1.4.1.1991.1.2.11.4.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| ||||
| NsnBgp4CommunityFilter | 1.3.6.1.4.1.1991.1.2.11.5 | |||
| TsnBgp4CommunityFilterTable | 1.3.6.1.4.1.1991.1.2.11.5.1 | NA | ||
table · not-accessible · current Bgp4 Community Filter table. | ||||
| RsnBgp4CommunityFilterEntry | 1.3.6.1.4.1.1991.1.2.11.5.1.1 | NA | ||
row · not-accessible · current An entry in the Bgp4 Community Filter table. | ||||
| CsnBgp4CommunityFilterIndex | 1.3.6.1.4.1.1991.1.2.11.5.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The table index for a filter entry. | ||||
| CsnBgp4CommunityFilterAction | 1.3.6.1.4.1.1991.1.2.11.5.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Action to take if the bgp address match with this filter.
| ||||
| CsnBgp4CommunityFilterCommNum | 1.3.6.1.4.1.1991.1.2.11.5.1.1.3 | OCTET STRING (SIZE (0..80)) | RW | |
column · OCTET STRING (SIZE (0..80)) · read-write · current A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs. | ||||
| CsnBgp4CommunityFilterInternet | 1.3.6.1.4.1.1991.1.2.11.5.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Disabled/Enabled the Internet Community.
| ||||
| CsnBgp4CommunityFilterNoAdvertise | 1.3.6.1.4.1.1991.1.2.11.5.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Do not advertise this route to any peer (internal or external).
| ||||
| CsnBgp4CommunityFilterNoExport | 1.3.6.1.4.1.1991.1.2.11.5.1.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Do not advertise this route to an EBGP peer.
| ||||
| CsnBgp4CommunityFilterRowStatus | 1.3.6.1.4.1.1991.1.2.11.5.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| ||||
| CsnBgp4CommunityFilterLocalAs | 1.3.6.1.4.1.1991.1.2.11.5.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Send this route to peers in other sub-autonomous systems within the local confederation. Do not advertise this route to an external system.
| ||||
| NsnBgp4NeighGenCfg | 1.3.6.1.4.1.1991.1.2.11.6 | |||
| TsnBgp4NeighGenCfgTable | 1.3.6.1.4.1.1991.1.2.11.6.1 | NA | ||
table · not-accessible · current Bgp4 Neighbor General Configuration table. | ||||
| RsnBgp4NeighGenCfgEntry | 1.3.6.1.4.1.1991.1.2.11.6.1.1 | NA | ||
row · not-accessible · current An entry in the Bgp4 Community Filter table. | ||||
| CsnBgp4NeighGenCfgNeighIp | 1.3.6.1.4.1.1991.1.2.11.6.1.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address for a neighbor entry. | ||||
| CsnBgp4NeighGenCfgAdvertlevel | 1.3.6.1.4.1.1991.1.2.11.6.1.1.2 | INTEGER (0..600) | RW | |
column · INTEGER (0..600) · read-write · current To set the minimum interval between the sending of BGP routing updates. | ||||
| CsnBgp4NeighGenCfgDefOriginate | 1.3.6.1.4.1.1991.1.2.11.6.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current To enable/disable the default originate for this neighbor.
| ||||
| CsnBgp4NeighGenCfgEbgpMultihop | 1.3.6.1.4.1.1991.1.2.11.6.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current To enable/disable the EBGP Muitihop for this neighbor.
| ||||
| CsnBgp4NeighGenCfgMaxPrefix | 1.3.6.1.4.1.1991.1.2.11.6.1.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current To control how many prefixes can be received from a neighbor. The minimum value of the maximum prefix is snBgp4GenNeighPrefixMinValue. The maximum value of the maximum prefix is snBgp4GenOperRoutes. | ||||
| CsnBgp4NeighGenCfgNextHopSelf | 1.3.6.1.4.1.1991.1.2.11.6.1.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current To enable/disable the next-hop processing of BGP updates on the router.
| ||||
| CsnBgp4NeighGenCfgRemoteAs | 1.3.6.1.4.1.1991.1.2.11.6.1.1.7 | INTEGER (1..65535) | RW | |
column · INTEGER (1..65535) · read-write · current To specify a neighbor with an autonomous system number(AS). | ||||
| CsnBgp4NeighGenCfgSendComm | 1.3.6.1.4.1.1991.1.2.11.6.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current To specify that a COMMUNITES attribute should be sent to a BGP neighbor.
| ||||
| CsnBgp4NeighGenCfgWeight | 1.3.6.1.4.1.1991.1.2.11.6.1.1.9 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current To assign a weight to a neighbor connection. | ||||
| CsnBgp4NeighGenCfgWeightFilterList | 1.3.6.1.4.1.1991.1.2.11.6.1.1.10 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. | ||||
| CsnBgp4NeighGenCfgRowStatus | 1.3.6.1.4.1.1991.1.2.11.6.1.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row applyDefault(6)...apply default value to an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| ||||
| CsnBgp4NeighGenCfgUpdateSrcLpbIntf | 1.3.6.1.4.1.1991.1.2.11.6.1.1.12 | INTEGER (0..8) | RW | |
column · INTEGER (0..8) · read-write · current To allow internal BGP sessions to use any operational loopback interface (1..8) for TCP connections. Zero interface means to restore the interface assignment to the closest interface, which is called the best local address. | ||||
| CsnBgp4NeighGenCfgRouteRefClient | 1.3.6.1.4.1.1991.1.2.11.6.1.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current To configure the router as a BGP route reflector, enable the specified neighbor as its client. When all the clients are disabled, the local router is no longer a route reflector.
| ||||
| CsnBgp4NeighGenCfgRemovePrivateAs | 1.3.6.1.4.1.1991.1.2.11.6.1.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current To enable/disable filtering private AS number.
| ||||
| CsnBgp4NeighGenCfgEbgpMultihopTtl | 1.3.6.1.4.1.1991.1.2.11.6.1.1.15 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current The EBGP Muitihop TTL for this neighbor. | ||||
| CsnBgp4NeighGenCfgShutdown | 1.3.6.1.4.1.1991.1.2.11.6.1.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current To enable/disable BGP4 Nbr Shutdown.
| ||||
| CsnBgp4NeighGenCfgKeepAliveTime | 1.3.6.1.4.1.1991.1.2.11.6.1.1.17 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current The Keep alive timer. | ||||
| CsnBgp4NeighGenCfgHoldTime | 1.3.6.1.4.1.1991.1.2.11.6.1.1.18 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current The Hold time timer. | ||||
| CsnBgp4NeighGenCfgDefOrigMap | 1.3.6.1.4.1.1991.1.2.11.6.1.1.19 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current An octet string of the route-map name, each character of the name is represented by one octet. | ||||
| CsnBgp4NeighGenCfgDesc | 1.3.6.1.4.1.1991.1.2.11.6.1.1.20 | OCTET STRING (SIZE (0..80)) | RW | |
column · OCTET STRING (SIZE (0..80)) · read-write · current An octet string of the neighbor description. | ||||
| CsnBgp4NeighGenCfgPass | 1.3.6.1.4.1.1991.1.2.11.6.1.1.21 | OCTET STRING (SIZE (0..80)) | RW | |
column · OCTET STRING (SIZE (0..80)) · read-write · current An octet string of the neighbor Md5 password. | ||||
| NsnBgp4NeighDistGroup | 1.3.6.1.4.1.1991.1.2.11.7 | |||
| TsnBgp4NeighDistGroupTable | 1.3.6.1.4.1.1991.1.2.11.7.1 | NA | ||
table · not-accessible · current Bgp4 Neighbor Distribute Group table. | ||||
| RsnBgp4NeighDistGroupEntry | 1.3.6.1.4.1.1991.1.2.11.7.1.1 | NA | ||
row · not-accessible · current An entry in the Bgp4 Distribute Group table. | ||||
| CsnBgp4NeighDistGroupNeighIp | 1.3.6.1.4.1.1991.1.2.11.7.1.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address for a neighbor entry. | ||||
| CsnBgp4NeighDistGroupDir | 1.3.6.1.4.1.1991.1.2.11.7.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The incoming/outgoing advertisements to which the access list is applied.
| ||||
| CsnBgp4NeighDistGroupAccessList | 1.3.6.1.4.1.1991.1.2.11.7.1.1.3 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. | ||||
| CsnBgp4NeighDistGroupRowStatus | 1.3.6.1.4.1.1991.1.2.11.7.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| ||||
| CsnBgp4NeighDistGroupInFilterList | 1.3.6.1.4.1.1991.1.2.11.7.1.1.5 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. | ||||
| CsnBgp4NeighDistGroupOutFilterList | 1.3.6.1.4.1.1991.1.2.11.7.1.1.6 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. | ||||
| CsnBgp4NeighDistGroupInIpAccessList | 1.3.6.1.4.1.1991.1.2.11.7.1.1.7 | OCTET STRING (SIZE (0..2)) | RW | |
column · OCTET STRING (SIZE (0..2)) · read-write · current A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. | ||||
| CsnBgp4NeighDistGroupOutIpAccessList | 1.3.6.1.4.1.1991.1.2.11.7.1.1.8 | OCTET STRING (SIZE (0..2)) | RW | |
column · OCTET STRING (SIZE (0..2)) · read-write · current A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. | ||||
| CsnBgp4NeighDistGroupInPrefixList | 1.3.6.1.4.1.1991.1.2.11.7.1.1.9 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current A Prefix name list. | ||||
| CsnBgp4NeighDistGroupOutPrefixList | 1.3.6.1.4.1.1991.1.2.11.7.1.1.10 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current A Prefix name list. | ||||
| NsnBgp4NeighFilterGroup | 1.3.6.1.4.1.1991.1.2.11.8 | |||
| TsnBgp4NeighFilterGroupTable | 1.3.6.1.4.1.1991.1.2.11.8.1 | NA | ||
table · not-accessible · current Bgp4 Neighbor Filter Group table. | ||||
| RsnBgp4NeighFilterGroupEntry | 1.3.6.1.4.1.1991.1.2.11.8.1.1 | NA | ||
row · not-accessible · current An entry in the Bgp4 Neighbor Filter Group table. | ||||
| CsnBgp4NeighFilterGroupNeighIp | 1.3.6.1.4.1.1991.1.2.11.8.1.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address for a neighbor entry. | ||||
| CsnBgp4NeighFilterGroupDir | 1.3.6.1.4.1.1991.1.2.11.8.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The incoming/outgoing advertisements to which the access list is applied.
| ||||
| CsnBgp4NeighFilterGroupAccessList | 1.3.6.1.4.1.1991.1.2.11.8.1.1.3 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. | ||||
| CsnBgp4NeighFilterGroupRowStatus | 1.3.6.1.4.1.1991.1.2.11.8.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| ||||
| CsnBgp4NeighFilterGroupInFilterList | 1.3.6.1.4.1.1991.1.2.11.8.1.1.5 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. | ||||
| CsnBgp4NeighFilterGroupOutFilterList | 1.3.6.1.4.1.1991.1.2.11.8.1.1.6 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. | ||||
| CsnBgp4NeighFilterGroupInAsPathAccessList | 1.3.6.1.4.1.1991.1.2.11.8.1.1.7 | OCTET STRING (SIZE (0..2)) | RW | |
column · OCTET STRING (SIZE (0..2)) · read-write · current A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. | ||||
| CsnBgp4NeighFilterGroupOutAsPathAccessList | 1.3.6.1.4.1.1991.1.2.11.8.1.1.8 | OCTET STRING (SIZE (0..2)) | RW | |
column · OCTET STRING (SIZE (0..2)) · read-write · current A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. | ||||
| CsnBgp4NeighFilterGroupWeight | 1.3.6.1.4.1.1991.1.2.11.8.1.1.9 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current To assign a weight to a neighbor filter. | ||||
| CsnBgp4NeighFilterGroupWeightAccessList | 1.3.6.1.4.1.1991.1.2.11.8.1.1.10 | OCTET STRING (SIZE (0..2)) | RW | |
column · OCTET STRING (SIZE (0..2)) · read-write · current A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. | ||||
| NsnBgp4NeighRouteMap | 1.3.6.1.4.1.1991.1.2.11.9 | |||
| TsnBgp4NeighRouteMapTable | 1.3.6.1.4.1.1991.1.2.11.9.1 | NA | ||
table · not-accessible · current Bgp4 Neighbor Route Map table. | ||||
| RsnBgp4NeighRouteMapEntry | 1.3.6.1.4.1.1991.1.2.11.9.1.1 | NA | ||
row · not-accessible · current An entry in the Bgp4 Route Map table. | ||||
| CsnBgp4NeighRouteMapNeighIp | 1.3.6.1.4.1.1991.1.2.11.9.1.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address for a neighbor entry. | ||||
| CsnBgp4NeighRouteMapDir | 1.3.6.1.4.1.1991.1.2.11.9.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The incoming/outgoing advertisements to which the access list is applied.
| ||||
| CsnBgp4NeighRouteMapMapName | 1.3.6.1.4.1.1991.1.2.11.9.1.1.3 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current An octet string of the route-map name, Each character of the name is represented by one octet. | ||||
| CsnBgp4NeighRouteMapRowStatus | 1.3.6.1.4.1.1991.1.2.11.9.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| ||||
| NsnBgp4Network | 1.3.6.1.4.1.1991.1.2.11.10 | |||
| TsnBgp4NetworkTable | 1.3.6.1.4.1.1991.1.2.11.10.1 | NA | ||
table · not-accessible · current Bgp4 Network Weight table. | ||||
| RsnBgp4NetworkEntry | 1.3.6.1.4.1.1991.1.2.11.10.1.1 | NA | ||
row · not-accessible · current An entry in the Bgp4 Network Weight table. | ||||
| CsnBgp4NetworkIp | 1.3.6.1.4.1.1991.1.2.11.10.1.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address for a network entry. | ||||
| CsnBgp4NetworkSubnetMask | 1.3.6.1.4.1.1991.1.2.11.10.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The subnet mask for a network entry. | ||||
| CsnBgp4NetworkWeight | 1.3.6.1.4.1.1991.1.2.11.10.1.1.3 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current To assign a weight to a neighbor connection. | ||||
| CsnBgp4NetworkBackdoor | 1.3.6.1.4.1.1991.1.2.11.10.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current To enable/disable the backdoor for this network.
| ||||
| CsnBgp4NetworkRowStatus | 1.3.6.1.4.1.1991.1.2.11.10.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| ||||
| NsnBgp4Redis | 1.3.6.1.4.1.1991.1.2.11.11 | |||
| TsnBgp4RedisTable | 1.3.6.1.4.1.1991.1.2.11.11.1 | NA | ||
table · not-accessible · current The BGP4 Redistribution contains configurations that could be imported into the BGP4 domain. | ||||
| RsnBgp4RedisEntry | 1.3.6.1.4.1.1991.1.2.11.11.1.1 | NA | ||
row · not-accessible · current The BGP4 Redistribution Entry specifies a particular RIP or , OSPF, or Static route to be imported into the BGP4 domain.
| ||||
| CsnBgp4RedisProtocol | 1.3.6.1.4.1.1991.1.2.11.11.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The imported configuration into BGP4 domain is set in the following: rip(1): - the RIP. ospf(2): - the OSPF. static(3): - the static. connected(4): - the connected. isis(5): - the ISIS.
| ||||
| CsnBgp4RedisMetric | 1.3.6.1.4.1.1991.1.2.11.11.1.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current The metric of using the specified protocol Metric value. | ||||
| CsnBgp4RedisRouteMap | 1.3.6.1.4.1.1991.1.2.11.11.1.1.3 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current An octet string of the route-map name, each character of the name is represented by one octet. | ||||
| CsnBgp4RedisWeight | 1.3.6.1.4.1.1991.1.2.11.11.1.1.4 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current To assign a weight for the specified protocol. | ||||
| CsnBgp4RedisMatchInternal | 1.3.6.1.4.1.1991.1.2.11.11.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This object is only applicable to the OSPF protocol.
| ||||
| CsnBgp4RedisMatchExternal1 | 1.3.6.1.4.1.1991.1.2.11.11.1.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current This object is only applicable to the OSPF protocol.
| ||||
| CsnBgp4RedisMatchExternal2 | 1.3.6.1.4.1.1991.1.2.11.11.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current This object is only applicable to the OSPF protocol.
| ||||
| CsnBgp4RedisRowStatus | 1.3.6.1.4.1.1991.1.2.11.11.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| ||||
| NsnBgp4RouteMapFilter | 1.3.6.1.4.1.1991.1.2.11.12 | |||
| TsnBgp4RouteMapFilterTable | 1.3.6.1.4.1.1991.1.2.11.12.1 | NA | ||
table · not-accessible · current Bgp4 RouteMap Filter table. | ||||
| RsnBgp4RouteMapFilterEntry | 1.3.6.1.4.1.1991.1.2.11.12.1.1 | NA | ||
row · not-accessible · current An entry in the Bgp4 RouteMap Filter table. | ||||
| CsnBgp4RouteMapFilterMapName | 1.3.6.1.4.1.1991.1.2.11.12.1.1.1 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current An octet string of the route-map name, each character of the name is represented by one octet. | ||||
| CsnBgp4RouteMapFilterSequenceNum | 1.3.6.1.4.1.1991.1.2.11.12.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current A sequence number for this particular route-map. | ||||
| CsnBgp4RouteMapFilterAction | 1.3.6.1.4.1.1991.1.2.11.12.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Action to take if the bgp address match with this filter.
| ||||
| CsnBgp4RouteMapFilterRowStatus | 1.3.6.1.4.1.1991.1.2.11.12.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| ||||
| NsnBgp4RouteMapMatch | 1.3.6.1.4.1.1991.1.2.11.13 | |||
| TsnBgp4RouteMapMatchTable | 1.3.6.1.4.1.1991.1.2.11.13.1 | NA | ||
table · not-accessible · current Bgp4 Route Map Set table. | ||||
| RsnBgp4RouteMapMatchEntry | 1.3.6.1.4.1.1991.1.2.11.13.1.1 | NA | ||
row · not-accessible · current An entry in the Bgp4 Route Map Match table. | ||||
| CsnBgp4RouteMapMatchMapName | 1.3.6.1.4.1.1991.1.2.11.13.1.1.1 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current An octet string of the route-map name, each character of the name is represented by one octet. | ||||
| CsnBgp4RouteMapMatchSequenceNum | 1.3.6.1.4.1.1991.1.2.11.13.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current A sequence number for this particular route-map. | ||||
| CsnBgp4RouteMapMatchAsPathFilter | 1.3.6.1.4.1.1991.1.2.11.13.1.1.3 | OCTET STRING (SIZE (0..20)) | RW | |
column · OCTET STRING (SIZE (0..20)) · read-write · current A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP autonomous system path access list. | ||||
| CsnBgp4RouteMapMatchCommunityFilter | 1.3.6.1.4.1.1991.1.2.11.13.1.1.4 | OCTET STRING (SIZE (0..20)) | RW | |
column · OCTET STRING (SIZE (0..20)) · read-write · current A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP community access list. | ||||
| CsnBgp4RouteMapMatchAddressFilter | 1.3.6.1.4.1.1991.1.2.11.13.1.1.5 | OCTET STRING (SIZE (0..20)) | RW | |
column · OCTET STRING (SIZE (0..20)) · read-write · current A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list. | ||||
| CsnBgp4RouteMapMatchMetric | 1.3.6.1.4.1.1991.1.2.11.13.1.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current To match a metric for BGP routes. | ||||
| CsnBgp4RouteMapMatchNextHopList | 1.3.6.1.4.1.1991.1.2.11.13.1.1.7 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current A number from 1 to 0xFFFF and there are 16 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP next-hop access list. | ||||
| CsnBgp4RouteMapMatchRouteType | 1.3.6.1.4.1.1991.1.2.11.13.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current To match a route-type. Currently only externalType1(2), externalType2(3), internal(4) is supported for SNMP-SET.
| ||||
| CsnBgp4RouteMapMatchTagList | 1.3.6.1.4.1.1991.1.2.11.13.1.1.9 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current To match a BGP tag access list. | ||||
| CsnBgp4RouteMapMatchRowMask | 1.3.6.1.4.1.1991.1.2.11.13.1.1.10 | Integer32 | RW | |
column · Integer32 · read-write · current This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapMatchEntry number of each row in the table. The bit is ON - means set, The bit is OFF - means reset | ||||
| CsnBgp4RouteMapMatchAsPathAccessList | 1.3.6.1.4.1.1991.1.2.11.13.1.1.11 | OCTET STRING (SIZE (0..20)) | RW | |
column · OCTET STRING (SIZE (0..20)) · read-write · current A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. This integer number is represented by 4 OCTETs. To match a BGP autonomous system path access list. | ||||
| CsnBgp4RouteMapMatchCommunityList | 1.3.6.1.4.1.1991.1.2.11.13.1.1.12 | OCTET STRING (SIZE (0..20)) | RW | |
column · OCTET STRING (SIZE (0..20)) · read-write · current A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. This integer number is represented by 4 OCTETs. To match a BGP community access list. | ||||
| CsnBgp4RouteMapMatchAddressAccessList | 1.3.6.1.4.1.1991.1.2.11.13.1.1.13 | OCTET STRING (SIZE (0..10)) | RW | |
column · OCTET STRING (SIZE (0..10)) · read-write · current A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list. | ||||
| CsnBgp4RouteMapMatchAddressPrefixList | 1.3.6.1.4.1.1991.1.2.11.13.1.1.14 | OCTET STRING (SIZE (0..170)) | RW | |
column · OCTET STRING (SIZE (0..170)) · read-write · current Prefix list To match a BGP address access list. | ||||
| CsnBgp4RouteMapMatchNextHopAccessList | 1.3.6.1.4.1.1991.1.2.11.13.1.1.15 | OCTET STRING (SIZE (0..10)) | RW | |
column · OCTET STRING (SIZE (0..10)) · read-write · current A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list. | ||||
| CsnBgp4RouteMapMatchNextHopPrefixList | 1.3.6.1.4.1.1991.1.2.11.13.1.1.16 | OCTET STRING (SIZE (0..170)) | RW | |
column · OCTET STRING (SIZE (0..170)) · read-write · current Prefix list To match a BGP address access list. | ||||
| NsnBgp4RouteMapSet | 1.3.6.1.4.1.1991.1.2.11.14 | |||
| TsnBgp4RouteMapSetTable | 1.3.6.1.4.1.1991.1.2.11.14.1 | NA | ||
table · not-accessible · current Bgp4 Route Map Set table. | ||||
| RsnBgp4RouteMapSetEntry | 1.3.6.1.4.1.1991.1.2.11.14.1.1 | NA | ||
row · not-accessible · current An entry in the Bgp4 Route Map Set table. | ||||
| CsnBgp4RouteMapSetMapName | 1.3.6.1.4.1.1991.1.2.11.14.1.1.1 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current An octet string of the route-map name, each character of the name is represented by one octet. | ||||
| CsnBgp4RouteMapSetSequenceNum | 1.3.6.1.4.1.1991.1.2.11.14.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current A sequence number for this particular route-map. | ||||
| CsnBgp4RouteMapSetAsPathType | 1.3.6.1.4.1.1991.1.2.11.14.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current To modify an autonomous system path for BGP routes. tag(0) - Converts the tag of a route into an autonomous system path. prepend(1) - Appends the string from snBgp4RouteMapSetAsPathString to the as-path of the route that is matched by the route map.
| ||||
| CsnBgp4RouteMapSetAsPathString | 1.3.6.1.4.1.1991.1.2.11.14.1.1.4 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current as-path string. This string is used if only if the snBgp4RouteMapSetAsPathCmd was sent together with the value set to prepend(1). | ||||
| CsnBgp4RouteMapSetAutoTag | 1.3.6.1.4.1.1991.1.2.11.14.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current To enable/disable the automatic-tag for BGP routes.
| ||||
| CsnBgp4RouteMapSetCommunityType | 1.3.6.1.4.1.1991.1.2.11.14.1.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current To set the BGP COMMUNITIES attribute. none means no other community attributes are allowed, nums means allowing community attributesi, the old values 1 and 2 are not valid since 5.03.00
| ||||
| CsnBgp4RouteMapSetCommunityNum | 1.3.6.1.4.1.1991.1.2.11.14.1.1.7 | Integer32 | RW | deprecated |
column · Integer32 · read-write · deprecated community-number. This number is used if only if the snBgp4RouteMapSetCommunityCmd was sent together with the value set to number(0). | ||||
| CsnBgp4RouteMapSetCommunityAdditive | 1.3.6.1.4.1.1991.1.2.11.14.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current To add the community to the already existing communities.
| ||||
| CsnBgp4RouteMapSetLocalPreference | 1.3.6.1.4.1.1991.1.2.11.14.1.1.9 | Integer32 | RW | |
column · Integer32 · read-write · current To modify a local-preference for BGP routes. | ||||
| CsnBgp4RouteMapSetMetric | 1.3.6.1.4.1.1991.1.2.11.14.1.1.10 | Integer32 | RW | |
column · Integer32 · read-write · current To modify a metric for BGP routes. | ||||
| CsnBgp4RouteMapSetNextHop | 1.3.6.1.4.1.1991.1.2.11.14.1.1.11 | IpAddress | RW | |
column · IpAddress · read-write · current To modify the IP address of the next hop for BGP routes. | ||||
| CsnBgp4RouteMapSetOrigin | 1.3.6.1.4.1.1991.1.2.11.14.1.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current To set the BGP origin code.
| ||||
| CsnBgp4RouteMapSetTag | 1.3.6.1.4.1.1991.1.2.11.14.1.1.13 | Integer32 | RW | |
column · Integer32 · read-write · current To specify the tag for BGP routes. | ||||
| CsnBgp4RouteMapSetWeight | 1.3.6.1.4.1.1991.1.2.11.14.1.1.14 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current To specify the BGP weight for the routing table. | ||||
| CsnBgp4RouteMapSetRowMask | 1.3.6.1.4.1.1991.1.2.11.14.1.1.15 | Integer32 | RW | |
column · Integer32 · read-write · current This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapSetEntry number of each row in the table. The bit is ON - means set, The bit is OFF - means reset | ||||
| CsnBgp4RouteMapSetCommunityNums | 1.3.6.1.4.1.1991.1.2.11.14.1.1.16 | OCTET STRING (SIZE (0..24)) | RW | |
column · OCTET STRING (SIZE (0..24)) · read-write · current Community number is from 1 to 0xFFFFFFFF. There are 6 of them. This integer number is represented by 4 OCTETs. | ||||
| CsnBgp4RouteMapSetDampenHalfLife | 1.3.6.1.4.1.1991.1.2.11.14.1.1.17 | INTEGER (1..45) | RW | |
column · INTEGER (1..45) · read-write · current Bgp4 Route Map Dampening Half Life. | ||||
| CsnBgp4RouteMapSetDampenReuse | 1.3.6.1.4.1.1991.1.2.11.14.1.1.18 | INTEGER (1..20000) | RW | |
column · INTEGER (1..20000) · read-write · current Bgp4 Route Map Dampening Reuse. | ||||
| CsnBgp4RouteMapSetDampenSuppress | 1.3.6.1.4.1.1991.1.2.11.14.1.1.19 | INTEGER (1..20000) | RW | |
column · INTEGER (1..20000) · read-write · current Bgp4 Route Map Dampening Suppress. | ||||
| CsnBgp4RouteMapSetDampenMaxSuppress | 1.3.6.1.4.1.1991.1.2.11.14.1.1.20 | INTEGER (1..20000) | RW | |
column · INTEGER (1..20000) · read-write · current Bgp4 Route Map Dampening Max Suppress Time. | ||||
| NsnBgp4NeighOperStatus | 1.3.6.1.4.1.1991.1.2.11.15 | |||
| TsnBgp4NeighOperStatusTable | 1.3.6.1.4.1.1991.1.2.11.15.1 | NA | ||
table · not-accessible · current Bgp4 Neighbor Operational Status table. | ||||
| RsnBgp4NeighOperStatusEntry | 1.3.6.1.4.1.1991.1.2.11.15.1.1 | NA | ||
row · not-accessible · current An entry in the Bgp4 Operational Status table. | ||||
| CsnBgp4NeighOperStatusIndex | 1.3.6.1.4.1.1991.1.2.11.15.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index for a neighbor entry. | ||||
| CsnBgp4NeighOperStatusIp | 1.3.6.1.4.1.1991.1.2.11.15.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address for a neighbor entry. | ||||
| CsnBgp4NeighOperStatusRemoteAs | 1.3.6.1.4.1.1991.1.2.11.15.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current To show a neighbor with an autonomous system number(AS). | ||||
| CsnBgp4NeighOperStatusBgpType | 1.3.6.1.4.1.1991.1.2.11.15.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current To show the type of BGP protocol whether is internal or external.
| ||||
| CsnBgp4NeighOperStatusState | 1.3.6.1.4.1.1991.1.2.11.15.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current To show the state of this neighbor.
| ||||
| CsnBgp4NeighOperStatusKeepAliveTime | 1.3.6.1.4.1.1991.1.2.11.15.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The Keep alive timer. | ||||
| CsnBgp4NeighOperStatusHoldTime | 1.3.6.1.4.1.1991.1.2.11.15.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The Hold time timer. | ||||
| CsnBgp4NeighOperStatusAdvertlevel | 1.3.6.1.4.1.1991.1.2.11.15.1.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current To show the minimum interval between the sending of BGP routing updates. | ||||
| CsnBgp4NeighOperStatusKeepAliveTxCounts | 1.3.6.1.4.1.1991.1.2.11.15.1.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current Keep alive message sent counts. | ||||
| CsnBgp4NeighOperStatusKeepAliveRxCounts | 1.3.6.1.4.1.1991.1.2.11.15.1.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current Keep alive message received counts. | ||||
| CsnBgp4NeighOperStatusUpdateTxCounts | 1.3.6.1.4.1.1991.1.2.11.15.1.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current Update message sent counts. | ||||
| CsnBgp4NeighOperStatusUpdateRxCounts | 1.3.6.1.4.1.1991.1.2.11.15.1.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current Update message received counts. | ||||
| CsnBgp4NeighOperStatusNotifTxCounts | 1.3.6.1.4.1.1991.1.2.11.15.1.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current Notification message sent counts. | ||||
| CsnBgp4NeighOperStatusNotifRxCounts | 1.3.6.1.4.1.1991.1.2.11.15.1.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current Notification message received counts. | ||||
| CsnBgp4NeighOperStatusOpenTxCounts | 1.3.6.1.4.1.1991.1.2.11.15.1.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current Open message sent counts. | ||||
| CsnBgp4NeighOperStatusOpenRxCounts | 1.3.6.1.4.1.1991.1.2.11.15.1.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current Open message received counts. | ||||
| NsnBgp4RouteOperStatus | 1.3.6.1.4.1.1991.1.2.11.16 | |||
| TsnBgp4RouteOperStatusTable | 1.3.6.1.4.1.1991.1.2.11.16.1 | NA | ||
table · not-accessible · current Bgp4 Routebor Operational Status table. | ||||
| RsnBgp4RouteOperStatusEntry | 1.3.6.1.4.1.1991.1.2.11.16.1.1 | NA | ||
row · not-accessible · current An entry in the Bgp4 Operational Status table. | ||||
| CsnBgp4RouteOperStatusIndex | 1.3.6.1.4.1.1991.1.2.11.16.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index for a route entry. | ||||
| CsnBgp4RouteOperStatusIp | 1.3.6.1.4.1.1991.1.2.11.16.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address for a route entry. | ||||
| CsnBgp4RouteOperStatusSubnetMask | 1.3.6.1.4.1.1991.1.2.11.16.1.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Subnet Mask for a route entry. | ||||
| CsnBgp4RouteOperStatusNextHop | 1.3.6.1.4.1.1991.1.2.11.16.1.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The next-hop IP for a route entry. | ||||
| CsnBgp4RouteOperStatusMetric | 1.3.6.1.4.1.1991.1.2.11.16.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current To show the metric value of a route entry. | ||||
| CsnBgp4RouteOperStatusLocalPreference | 1.3.6.1.4.1.1991.1.2.11.16.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current To show the local preference of a route entry. | ||||
| CsnBgp4RouteOperStatusWeight | 1.3.6.1.4.1.1991.1.2.11.16.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current To show the weight of this route. | ||||
| CsnBgp4RouteOperStatusOrigin | 1.3.6.1.4.1.1991.1.2.11.16.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current To show the origin of this route.
| ||||
| CsnBgp4RouteOperStatusStatus | 1.3.6.1.4.1.1991.1.2.11.16.1.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current A bit array that contains the status of this route. This is a packed bit string; The following shows the meaning of each bit: (bit 0 is the least significant bit and 0=FALSE, 1=TRUE). bit position meaning ------------ ------- 6-31 reserved. 5 aggregate. 4 best. 3 internal. 2 local. 1 suppressed. 0 valid. | ||||
| CsnBgp4RouteOperStatusRouteTag | 1.3.6.1.4.1.1991.1.2.11.16.1.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current To show the route tag of this route. | ||||
| CsnBgp4RouteOperStatusCommunityList | 1.3.6.1.4.1.1991.1.2.11.16.1.1.11 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current To show the community list of this route. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to 0xFFFFFFFF. This integer number is represented by 4 OCTETs. In the community list, it could have some Well-known numbers such as: BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01 BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE 0xFFFFFF02 | ||||
| CsnBgp4RouteOperStatusAsPathList | 1.3.6.1.4.1.1991.1.2.11.16.1.1.12 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current To show the AS Path list of this route. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs. | ||||
| NsnBgp4NeighborSummary | 1.3.6.1.4.1.1991.1.2.11.17 | |||
| TsnBgp4NeighborSummaryTable | 1.3.6.1.4.1.1991.1.2.11.17.1 | NA | ||
table · not-accessible · current Bgp4 Routebor Operational Status table. | ||||
| RsnBgp4NeighborSummaryEntry | 1.3.6.1.4.1.1991.1.2.11.17.1.1 | NA | ||
row · not-accessible · current An entry in the Bgp4 Operational Status table. | ||||
| CsnBgp4NeighborSummaryIndex | 1.3.6.1.4.1.1991.1.2.11.17.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index for a route entry. | ||||
| CsnBgp4NeighborSummaryIp | 1.3.6.1.4.1.1991.1.2.11.17.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address for a route entry. | ||||
| CsnBgp4NeighborSummaryState | 1.3.6.1.4.1.1991.1.2.11.17.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current To show the state of this neighbor.
| ||||
| CsnBgp4NeighborSummaryStateChgTime | 1.3.6.1.4.1.1991.1.2.11.17.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The time of a change of the state of this neighbor. | ||||
| CsnBgp4NeighborSummaryRouteReceived | 1.3.6.1.4.1.1991.1.2.11.17.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The number of routes received of this neighbor. | ||||
| CsnBgp4NeighborSummaryRouteInstalled | 1.3.6.1.4.1.1991.1.2.11.17.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The number of routes installed of this neighbor. | ||||
| NsnBgp4Attribute | 1.3.6.1.4.1.1991.1.2.11.18 | |||
| TsnBgp4AttributeTable | 1.3.6.1.4.1.1991.1.2.11.18.1 | NA | ||
table · not-accessible · current Bgp4 Attribute entries table. | ||||
| RsnBgp4AttributeEntry | 1.3.6.1.4.1.1991.1.2.11.18.1.1 | NA | ||
| CsnBgp4AttributeIndex | 1.3.6.1.4.1.1991.1.2.11.18.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index for a route entry. | ||||
| CsnBgp4AttributeNextHop | 1.3.6.1.4.1.1991.1.2.11.18.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The next-hop IP for a route entry. | ||||
| CsnBgp4AttributeMetric | 1.3.6.1.4.1.1991.1.2.11.18.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current To show the metric value of a route entry. | ||||
| CsnBgp4AttributeOrigin | 1.3.6.1.4.1.1991.1.2.11.18.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current To show the origin of this route.
| ||||
| CsnBgp4AttributeAggregatorAs | 1.3.6.1.4.1.1991.1.2.11.18.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The aggregator AS number for an attribute entry. | ||||
| CsnBgp4AttributeRouterId | 1.3.6.1.4.1.1991.1.2.11.18.1.1.6 | IpAddress | RO | |
column · IpAddress · read-only · current The router ID for an attribute entry. | ||||
| CsnBgp4AttributeAtomicAggregatePresent | 1.3.6.1.4.1.1991.1.2.11.18.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The atomic aggregate present in an attribute entry.
| ||||
| CsnBgp4AttributeLocalPreference | 1.3.6.1.4.1.1991.1.2.11.18.1.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current To show the local preference of a route entry. | ||||
| CsnBgp4AttributeCommunityList | 1.3.6.1.4.1.1991.1.2.11.18.1.1.9 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current To show the community list of this attribute entry. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to 0xFFFFFFFF. This integer number is represented by 4 OCTETs. In the community list, it could have some Well-known numbers such as: BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01 BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE 0xFFFFFF02 | ||||
| CsnBgp4AttributeAsPathList | 1.3.6.1.4.1.1991.1.2.11.18.1.1.10 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current To show the AS Path list of this attribute entry. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs. | ||||
| CsnBgp4AttributeOriginator | 1.3.6.1.4.1.1991.1.2.11.18.1.1.11 | IpAddress | RO | |
column · IpAddress · read-only · current The originator IP address for an attribute entry. | ||||
| CsnBgp4AttributeClusterList | 1.3.6.1.4.1.1991.1.2.11.18.1.1.12 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current To show the cluster list of this attribute entry. If the cluster list is an NULL string, it means an empty list. Otherwise, the list is a group of cluster ID which is represented by 4 OCTETs IP address. | ||||
| NsnBgp4ClearNeighborCmd | 1.3.6.1.4.1.1991.1.2.11.19 | |||
| TsnBgp4ClearNeighborCmdTable | 1.3.6.1.4.1.1991.1.2.11.19.1 | NA | ||
table · not-accessible · current Clear Bgp4 command table. | ||||
| RsnBgp4ClearNeighborCmdEntry | 1.3.6.1.4.1.1991.1.2.11.19.1.1 | NA | ||
row · not-accessible · current An entry in the clear Bgp4 neighbor command table. | ||||
| CsnBgp4ClearNeighborCmdIp | 1.3.6.1.4.1.1991.1.2.11.19.1.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address for a neighbor entry. If the IP address is 255.255.255.255, it means for all neighbors. | ||||
| CsnBgp4ClearNeighborCmdElement | 1.3.6.1.4.1.1991.1.2.11.19.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current To send the command element of this neighbor for value(1) to (5) valid(0) is received in SNMP-get.
| ||||
| NsnBgp4NeighPrefixGroup | 1.3.6.1.4.1.1991.1.2.11.20 | |||
| TsnBgp4NeighPrefixGroupTable | 1.3.6.1.4.1.1991.1.2.11.20.1 | NA | ||
table · not-accessible · current Bgp4 Neighbor Prefix Group table. | ||||
| RsnBgp4NeighPrefixGroupEntry | 1.3.6.1.4.1.1991.1.2.11.20.1.1 | NA | ||
row · not-accessible · current An entry in the Bgp4 Prefix Group table. | ||||
| CsnBgp4NeighPrefixGroupNeighIp | 1.3.6.1.4.1.1991.1.2.11.20.1.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address for a neighbor entry. | ||||
| CsnBgp4NeighPrefixGroupDir | 1.3.6.1.4.1.1991.1.2.11.20.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The incoming/outgoing advertisements to which the access list is applied.
| ||||
| CsnBgp4NeighPrefixGroupInAccessList | 1.3.6.1.4.1.1991.1.2.11.20.1.1.3 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current An in access prefix list name. | ||||
| CsnBgp4NeighPrefixGroupOutAccessList | 1.3.6.1.4.1.1991.1.2.11.20.1.1.4 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current An out prefix list name. | ||||
| CsnBgp4NeighPrefixGroupRowStatus | 1.3.6.1.4.1.1991.1.2.11.20.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
| ||||