FOUNDRY-SN-AGENT-MIB
Brocade Communication Systems, Inc. (formerly 'Foundry Networks, Inc.')Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
snmptranslate -m FOUNDRY-SN-AGENT-MIB -Tpsnmpwalk -v2c -c <community> -m FOUNDRY-SN-AGENT-MIB <host> 1.3.6.1.4.1.1991.4Imports
| FOUNDRY-SN-ROOT-MIB | snAgentSys, snChassis, snStack |
|---|---|
| HCNUM-TC | CounterBasedGauge64 |
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, internet, iso, private |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NsnChasGen | 1.3.6.1.4.1.1991.1.1.1.1 | ||||||||||||||||||||
| SsnChasType | 1.3.6.1.4.1.1991.1.1.1.1.1 | DisplayString (SIZE (0..128)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (0..128)) · read-only · current The chassis type represents the type of Ruckus Wireless product being managed. | |||||||||||||||||||||
| SsnChasSerNum | 1.3.6.1.4.1.1991.1.1.1.1.2 | DisplayString (SIZE (0..128)) | RO | CKM1234L567 | |||||||||||||||||
scalar · DisplayString (SIZE (0..128)) · read-only · current The serial number of the chassis. If the serial number is unknown or unavailable then the value should be a zero length string. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SsnChasPwrSupplyStatus | 1.3.6.1.4.1.1991.1.1.1.1.3 | Integer32 | RO | deprecated | |||||||||||||||||
scalar · Integer32 · read-only · deprecated This object is being deprecated, please use snChasPwrSupplyTable instead. A bit array that contains the value of the Chassis Power Supplies. This is a packed bit string; the 2 power supplies status are encoded into 4 bits (a nibble). There are multiple power supplies per chassis in this release. The following shows the meaning of each bit: (bit 0 is the least significant bit). bit position meaning ------------ ------- 20-31 reserved 19 Power Supply 8 DC (0=bad, 1=good). 18 Power Supply 7 DC (0=bad, 1=good). 17 Power Supply 8 present status (0=present, 1=not-present). 16 Power Supply 7 present status (0=present, 1=not-present). 15 Power Supply 6 DC (0=bad, 1=good). 14 Power Supply 5 DC (0=bad, 1=good). 13 Power Supply 6 present status (0=present, 1=not-present). 12 Power Supply 5 present status (0=present, 1=not-present). 11 Power Supply 4 DC (0=bad, 1=good). 10 Power Supply 3 DC (0=bad, 1=good). 9 Power Supply 4 present status (0=present, 1=not-present). 8 Power Supply 3 present status (0=present, 1=not-present). 4-7 reserved 3 Power Supply 2 DC (0=bad, 1=good). 2 Power Supply 1 DC (0=bad, 1=good). 1 Power Supply 2 present status (0=present, 1=not-present). 0 Power Supply 1 present status (0=present, 1=not-present). | |||||||||||||||||||||
| SsnChasFanStatus | 1.3.6.1.4.1.1991.1.1.1.1.4 | Integer32 | RO | deprecated | |||||||||||||||||
scalar · Integer32 · read-only · deprecated This object is being deprecated, please use snChasFanTable instead. A bit array that contains the value of the fan status. This is a packed bit string. The status of each fan is encoded into one bit. bit value meaning --------- ------- 0 fan failure. 1 fan good. There are two fans per VLAN Switch chassis in this release. The following shows the meaning of each bit: (bit 0 is the least significant bit). bit position meaning ------------ ------- 6-31 reserved 5 fan6 status 4 fan5 status 3 fan4 status 2 fan3 status 1 fan2 status 0 fan1 status | |||||||||||||||||||||
| SsnChasMainBrdDescription | 1.3.6.1.4.1.1991.1.1.1.1.5 | DisplayString (SIZE (0..128)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (0..128)) · read-only · current The main board description string. (It is obsoleted for Chassis Product) | |||||||||||||||||||||
| SsnChasMainPortTotal | 1.3.6.1.4.1.1991.1.1.1.1.6 | INTEGER (1..24) | RO | ||||||||||||||||||
scalar · INTEGER (1..24) · read-only · current The total number of ports for the main board. (It is obsoleted for Chassis Product) | |||||||||||||||||||||
| SsnChasExpBrdDescription | 1.3.6.1.4.1.1991.1.1.1.1.7 | DisplayString (SIZE (0..128)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (0..128)) · read-only · current The expansion board description string. Expansion board are those boards attaching on the main board. (It is obsoleted for Chassis Product) | |||||||||||||||||||||
| SsnChasExpPortTotal | 1.3.6.1.4.1.1991.1.1.1.1.8 | INTEGER (1..24) | RO | ||||||||||||||||||
scalar · INTEGER (1..24) · read-only · current The total number of ports for the expansion board. (It is obsoleted for Chassis Product) | |||||||||||||||||||||
| SsnChasStatusLeds | 1.3.6.1.4.1.1991.1.1.1.1.9 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current A bit array that contains the value of the front panel status LEDs. This is a bit-map; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 24 that means 24 Ports Status LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (Link off) 1 on (Link on) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 -------- | |||||||||||||||||||||
| SsnChasTrafficLeds | 1.3.6.1.4.1.1991.1.1.1.1.10 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current A bit array that contains the value of the front panel traffic LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 24 that means 24 Ports Traffic LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (no traffic) 1 on (traffic) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 -------- | |||||||||||||||||||||
| SsnChasMediaLeds | 1.3.6.1.4.1.1991.1.1.1.1.11 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current A bit array that contains the value of the front panel media LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 24 that means 24 Ports Media LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning --------- ------- 0 half duplex 1 full duplex The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 --------- | |||||||||||||||||||||
| SsnChasEnablePwrSupplyTrap | 1.3.6.1.4.1.1991.1.1.1.1.12 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates whether the SNMP agent process is permitted to generate power supply failure traps.
| |||||||||||||||||||||
| SsnChasMainBrdId | 1.3.6.1.4.1.1991.1.1.1.1.13 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The main board identifier, which can uniquely identify a board type. It is an encoded octet string with the following meaning: octet 0 - octet string format version, which identifies the format of this string. If format version octet has the value 1, the octets after the version octet have the following meaning: octet 1 - product type, FIWG=0x57, FIBB=0x42, FIMLS=0x4D NI=0x4E, TI=0x54, TIRT=0x52 octet 2 - board type, POWERPC=1, ALPHA=2 The length of the octet string is 27. If format version octet has the value 2, the octets after the version octet have the following meaning: octet 1 - product type: BI_WG 0x57 BI_BB 0x42 BI_NI 0x4E NI_M4 0x4D BI_SLB 0x53 octet 2 - module type: MASTER_FIBER_8G 0x0 MASTER_FIBER_4G 0x1 MASTER_COPPER_16 0x2 SLAVE_FIBER_4G 0x3 FI_MASTER_FIBER_2G 0x4 FI_MASTER_FIBER_4G 0x5 MASTER_COPPER_8G 0x6 FI_MASTER_FIBER_8G 0x7 SLAVE_FIBER_8G 0x8 MASTER_COPPER_12_2 0x9 SLAVE_COPPER_24 0xA FI_SLAVE_COPPER_24 0xB SLAVE_100FX_8 0xD SLAVE_100FX_16 0xC SLAVE_COPPER_8G 0xE SLAVE_COPPER_16_2 0xF STACK_FIBER_8G 0x10 STACK_COPPER_8G 0x11 MASTER_FIBER_2G 0x12 SLAVE_100FX_24 0x13 MASTER_FIBER_0G 0x14 POS_622M 0x15 POS_155M 0x16 SLAVE_FIBER_2G 0x17 SLAVE_COPPER_2G 0x18 FI_SLAVE_FIBER_2G 0x19 FI_SLAVE_FIBER_4G 0x1A FI_SLAVE_FIBER_8G 0x1B FI_SLAVE_COPPER_8G 0x1C FI_MASTER_COPPER_8G 0x1D POS_155M2P 0x1E FI_MASTER_COPPER_4G 0x1F FI_MASTER_COPPER_2G 0x20 MASTER_COPPER_4G 0x21 MASTER_COPPER_2G 0x22 MASTER_M4_8G 0x23 MASTER_M4_4G 0x24 MASTER_M4_2G 0x25 MASTER_M4_0G 0x26 MASTER_M5_0G 0x27 POS_2488M 0x28 SLAVE_M5_0G 0x29 POS_N2488M 0x2A STACK_IPC_48_2 0x2B SLAVE_NPA_FIBER_4G 0x2C ATM_2PORT 0x2D ATM_4PORT 0x2E SLAVE_FIBER_10G 0x2F STACK_FES_48_2 0x30 STACK_FES_24_2 0x31 STACK_FES_96_4 0x32 STACK_FES_12G 0x33 STACK_FESX_24G 0x34 STACK_FESX_24_2_G 0x35 STACK_FESX_24_1_G 0x36 STACK_FESX_48G 0x37 STACK_FESX_48_2_G 0x38 STACK_FESX_48_1_G 0x39 SUPERX_FI_MGMT 0x40 SUPERX_FI_2P10G 0x41 SUPERX_FI_24GC 0x42 SUPERX_FI_24GF 0x43 SUPERX_FI_2P10G_WAN 0x44 SUPERX_FI_MGMT_II 0x4a SLAVE_JC_48E 0xC3 SLAVE_JC_48T 0xC4 MASTER_JC_M4_8G 0xC5 SLAVE_JC_8G 0xC6 SLAVE_JC_B16GF 0xC8 MASTER_JC_B2404 0xC9 SLAVE_JC_B16GC 0xCA The length of the octet string is 28. Both format version 1 and 2: octet 3 - processor type, PVR_M603=3, PVR_M604=4, PVR_M603E=6, PVR_M603EV=7, PVR_M750=8, PVR_M604E=9, PVR_M8245=81 octet 4 to octet 5 - processor speed in MHz octet 6 - MAC type: MAC_NONE=0 MAC_SEEQ_10_100=1, MAC_DEC_10_100=2, MAC_3COM_10_100=3, MAC_X10GMAC_10000=4, MAC_SEEQ_1000=5, MAC_GMAC_1000=6, MAC_VLSI_1000=7 octet 7 - PHY type, PHY_NONE=0, PHY_QSI=1, PHY_BROADCOM=2, PHY_ICS=3, PHY_NATIONAL=4, PHY_LEVEL1=6, PHY_BROADCOM_10_100=7, PHY_LEVEL24=8, PHY_BROADCOM_10000=9 (for 10G), PHY_3COM_10_100=9 (for others) octet 8 - port type, COPPER=0, FIBER=1 octet 9 - fiber port type, NONFIBER=0, SX_FIBER=1, LX_FIBER=2, LHX_FIBER=3, LX_SX_FIBER=4, LHB_FIBER=5 octet 10 to octet 13 - DRAM size in KBytes octet 14 to octet 17 - boot flash size in KBytes octet 18 to octet 21 - code flash size in KBytes octet 22 to octet 27 - serial number. Format version 1 only: octet 28 - chassis backplane type. chassis4000 = 0x00 chassis8000 = 0x02 chassis15000 = 0x01 chassisFISX = 0x04 Turbo8 = 0x07 (stack2) FastIron2 = 0x06 (stack1) | |||||||||||||||||||||
| SsnChasExpBrdId | 1.3.6.1.4.1.1991.1.1.1.1.14 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The expansion board identifier. Expansion board are those boards attaching on the main board. It is an encoded octet string with the following meaning: octet 0 - octet string format version, which identifies the format of this string. If format version octet has the value 1, the octets after the version octet have the following meaning: octet 1 - expansion board type, HUNDRED_MEG_1PORT=1, HUNDRED_MEG_2PORT=2, HUNDRED_MEG_1PORT_COPPER=3, HUNDRED_MEG_2PORT_COPPER=4, HUNDRED_MEG_2PORT_LX=5, GIGA_1PORT=8, GIGA_2PORT=9 octet 2 - fiber port type, NONFIBER=0, SX_FIBER=1, LX_FIBER=2, LHX_FIBER=3, LX_SX_FIBER=4 (It is obsoleted for Chassis Product) | |||||||||||||||||||||
| SsnChasSpeedLeds | 1.3.6.1.4.1.1991.1.1.1.1.15 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current A bit array that contains the value of the front panel media LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 24 that means 24 Ports Speed LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning --------- ------- 0 10 MBit 1 100 MBit The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 --------- | |||||||||||||||||||||
| SsnChasEnableFanTrap | 1.3.6.1.4.1.1991.1.1.1.1.16 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates whether the SNMP agent process is permitted to generate fan failure traps.
| |||||||||||||||||||||
| SsnChasIdNumber | 1.3.6.1.4.1.1991.1.1.1.1.17 | DisplayString (SIZE (0..64)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..64)) · read-write · current An administratively-assigned chassis identity number, used by inventory control. | |||||||||||||||||||||
| SsnChasActualTemperature | 1.3.6.1.4.1.1991.1.1.1.1.18 | INTEGER (-110..250) | RO | ||||||||||||||||||
scalar · INTEGER (-110..250) · read-only · current Temperature of the chassis. Each unit is 0.5 degrees Celcius. Only management module built with temperature sensor hardware is applicable. For those non-applicable management module, it returns no-such-name. | |||||||||||||||||||||
| SsnChasWarningTemperature | 1.3.6.1.4.1.1991.1.1.1.1.19 | INTEGER (0..250) | RW | ||||||||||||||||||
scalar · INTEGER (0..250) · read-write · current Actual temperature higher than this threshold value will trigger the switch to send a temperature warning trap. Each unit is 0.5 degrees Celcius. Only management module built with temperature sensor hardware is applicable. For those non-applicable management module, it returns no-such-name. | |||||||||||||||||||||
| SsnChasShutdownTemperature | 1.3.6.1.4.1.1991.1.1.1.1.20 | INTEGER (0..250) | RW | ||||||||||||||||||
scalar · INTEGER (0..250) · read-write · current Actual temperature higher than this threshold value will shutdown a partial of the switch hardware to cool down the system. Each unit is 0.5 degrees Celcius. Only management module built with temperature sensor hardware is applicable. For those non-applicable management module, it returns no-such-name. | |||||||||||||||||||||
| SsnChasEnableTempWarnTrap | 1.3.6.1.4.1.1991.1.1.1.1.21 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates whether the SNMP agent process is permitted to generate temperature warning traps.
| |||||||||||||||||||||
| SsnChasFlashCard | 1.3.6.1.4.1.1991.1.1.1.1.22 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current A bit array that contains the value of the flash card status. This is a packed bit string. The status of each flash card is encoded into one bit. bit value meaning --------- ------- 0 flash card absent. 1 flash card present. There are up to two flash cards in this release. This object is valid if M4 management module is present. The following shows the meaning of each bit: (bit 0 is the least significant bit). bit position meaning ------------ ------- 2-31 reserved 1 flash card 2 status 0 flash card 1 status | |||||||||||||||||||||
| SsnChasFlashCardLeds | 1.3.6.1.4.1.1991.1.1.1.1.23 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current A bit array that contains the value of the flash card LEDs. This is a packed bit string; each LED is encoded into 1 bit for each flash card. bit value meaning -------- --------- 0 off 1 on | |||||||||||||||||||||
| SsnChasNumSlots | 1.3.6.1.4.1.1991.1.1.1.1.24 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current Number of slots of the chassis. | |||||||||||||||||||||
| SsnChasArchitectureType | 1.3.6.1.4.1.1991.1.1.1.1.25 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Architecture type.
| |||||||||||||||||||||
| SsnChasProductType | 1.3.6.1.4.1.1991.1.1.1.1.26 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Product type.
| |||||||||||||||||||||
| SsnChasGlobalIgnoreShutdownTemperature | 1.3.6.1.4.1.1991.1.1.1.1.30 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/Disable the temperature threshold shutdown (Battleshort mode) feature at global level. Able to fetch the temperature threshold shutdown (Battleshort mode) feature status enabled (1)/disabled (0) at global level The set operation is allowed at global level. Set to 1 to enable the temperature threshold shutdown (Battleshort mode) feature at global level. Set to 0 to disable the temperature threshold shutdown (Battleshort mode) feature at global level. The default status is disabled.
| |||||||||||||||||||||
| NsnChasPwr | 1.3.6.1.4.1.1991.1.1.1.2 | ||||||||||||||||||||
| TsnChasPwrSupplyTable | 1.3.6.1.4.1.1991.1.1.1.2.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of each power supply information. Only installed power supply appears in a table row. | |||||||||||||||||||||
| RsnChasPwrSupplyEntry | 1.3.6.1.4.1.1991.1.1.1.2.1.1 | NA | |||||||||||||||||||
| CsnChasPwrSupplyIndex | 1.3.6.1.4.1.1991.1.1.1.2.1.1.1 | Integer32 | RO | 1 | |||||||||||||||||
| CsnChasPwrSupplyDescription | 1.3.6.1.4.1.1991.1.1.1.2.1.1.2 | DisplayString (SIZE (0..128)) | RO | | |||||||||||||||||
column · DisplayString (SIZE (0..128)) · read-only · current The power supply description string. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsnChasPwrSupplyOperStatus | 1.3.6.1.4.1.1991.1.1.1.2.1.1.3 | INTEGER | RO | normal(2) | |||||||||||||||||
| TsnChasPwrSupply2Table | 1.3.6.1.4.1.1991.1.1.1.2.2 | NA | |||||||||||||||||||
table · not-accessible · current A table of each power supply information for each unit. Only installed power supply appears in a table row. | |||||||||||||||||||||
| RsnChasPwrSupply2Entry | 1.3.6.1.4.1.1991.1.1.1.2.2.1 | NA | |||||||||||||||||||
row · not-accessible · current A row in the power supply table. | |||||||||||||||||||||
| CsnChasPwrSupply2Unit | 1.3.6.1.4.1.1991.1.1.1.2.2.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The index to power supply table. | |||||||||||||||||||||
| CsnChasPwrSupply2Index | 1.3.6.1.4.1.1991.1.1.1.2.2.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The index to power supply table. | |||||||||||||||||||||
| CsnChasPwrSupply2Description | 1.3.6.1.4.1.1991.1.1.1.2.2.1.3 | DisplayString (SIZE (0..128)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..128)) · read-only · current The power supply description string. | |||||||||||||||||||||
| CsnChasPwrSupply2OperStatus | 1.3.6.1.4.1.1991.1.1.1.2.2.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The power supply operation status.
| |||||||||||||||||||||
| NsnChasFan | 1.3.6.1.4.1.1991.1.1.1.3 | ||||||||||||||||||||
| TsnChasFanTable | 1.3.6.1.4.1.1991.1.1.1.3.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of each fan information. Only installed fan appears in a table row. | |||||||||||||||||||||
| RsnChasFanEntry | 1.3.6.1.4.1.1991.1.1.1.3.1.1 | NA | |||||||||||||||||||
| CsnChasFanIndex | 1.3.6.1.4.1.1991.1.1.1.3.1.1.1 | Integer32 | RO | 1 | |||||||||||||||||
| CsnChasFanDescription | 1.3.6.1.4.1.1991.1.1.1.3.1.1.2 | DisplayString (SIZE (0..128)) | RO | Metro Fan Tray | |||||||||||||||||
column · DisplayString (SIZE (0..128)) · read-only · current The fan description string. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsnChasFanOperStatus | 1.3.6.1.4.1.1991.1.1.1.3.1.1.3 | INTEGER | RO | normal(2) | |||||||||||||||||
column · INTEGER · read-only · current The fan operation status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TsnChasFan2Table | 1.3.6.1.4.1.1991.1.1.1.3.2 | NA | |||||||||||||||||||
table · not-accessible · current A table of each fan information for each unit. Only installed fan appears in a table row. | |||||||||||||||||||||
| RsnChasFan2Entry | 1.3.6.1.4.1.1991.1.1.1.3.2.1 | NA | |||||||||||||||||||
| CsnChasFan2Unit | 1.3.6.1.4.1.1991.1.1.1.3.2.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The index to fan table. | |||||||||||||||||||||
| CsnChasFan2Index | 1.3.6.1.4.1.1991.1.1.1.3.2.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The index to fan table. | |||||||||||||||||||||
| CsnChasFan2Description | 1.3.6.1.4.1.1991.1.1.1.3.2.1.3 | DisplayString (SIZE (0..128)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..128)) · read-only · current The fan description string. | |||||||||||||||||||||
| CsnChasFan2OperStatus | 1.3.6.1.4.1.1991.1.1.1.3.2.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The fan operation status.
| |||||||||||||||||||||
| NsnChasUnit | 1.3.6.1.4.1.1991.1.1.1.4 | ||||||||||||||||||||
| TsnChasUnitTable | 1.3.6.1.4.1.1991.1.1.1.4.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of chassis information for each unit. Only active chassis appears in a table row. | |||||||||||||||||||||
| RsnChasUnitEntry | 1.3.6.1.4.1.1991.1.1.1.4.1.1 | NA | |||||||||||||||||||
| CsnChasUnitIndex | 1.3.6.1.4.1.1991.1.1.1.4.1.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The index to chassis table. | |||||||||||||||||||||
| CsnChasUnitSerNum | 1.3.6.1.4.1.1991.1.1.1.4.1.1.2 | DisplayString (SIZE (0..128)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..128)) · read-only · current The serial number of the chassis for each unit. If the serial number is unknown or unavailable then the value should be a zero length string. | |||||||||||||||||||||
| CsnChasUnitNumSlots | 1.3.6.1.4.1.1991.1.1.1.4.1.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of slots of the chassis for each unit. | |||||||||||||||||||||
| CsnChasUnitActualTemperature | 1.3.6.1.4.1.1991.1.1.1.4.1.1.4 | INTEGER (-110..250) | RO | ||||||||||||||||||
column · INTEGER (-110..250) · read-only · current Temperature of the chassis. Each unit is 0.5 degrees Celcius. Only management module built with temperature sensor hardware is applicable. For those non-applicable management module, it returns no-such-name. | |||||||||||||||||||||
| CsnChasUnitWarningTemperature | 1.3.6.1.4.1.1991.1.1.1.4.1.1.5 | INTEGER (0..250) | RO | ||||||||||||||||||
column · INTEGER (0..250) · read-only · current Actual temperature higher than this threshold value will trigger the switch to send a temperature warning trap. Each unit is 0.5 degrees Celcius. Only management module built with temperature sensor hardware is applicable. For those non-applicable management module, it returns no-such-name. | |||||||||||||||||||||
| CsnChasUnitShutdownTemperature | 1.3.6.1.4.1.1991.1.1.1.4.1.1.6 | INTEGER (0..250) | RO | ||||||||||||||||||
column · INTEGER (0..250) · read-only · current Actual temperature higher than this threshold value will shutdown a partial of the switch hardware to cool down the system. Each unit is 0.5 degrees Celcius. Only management module built with temperature sensor hardware is applicable. For those non-applicable management module, it returns no-such-name. | |||||||||||||||||||||
| CsnChasUnitPartNum | 1.3.6.1.4.1.1991.1.1.1.4.1.1.7 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The part number of the chassis for each unit. If the part number is unknown or unavailable then the value should be a zero length string. | |||||||||||||||||||||
| CsnChasUnitIgnoreShutdownTemperature | 1.3.6.1.4.1.1991.1.1.1.4.1.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable/Disable the temperature threshold shutdown (Battleshort mode) feature on the unit specific. Able to fetch the temperature threshold shutdown (Battleshort mode) feature status enabled (1)/disabled (0) on the unit specific The set operation is allowed at unit specific. Set to 1 to enable the temperature threshold shutdown (Battleshort mode) feature on the unit specific. Set to 0 to disable the temperature threshold shutdown (Battleshort mode) feature on the unit specific. The default status is disabled.
| |||||||||||||||||||||
| CsnChasUnitFanless | 1.3.6.1.4.1.1991.1.1.1.4.1.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Fanless mode can be enabled or disabled on certain FI devices. none (0): not applicable to the device. enabled(1): fanless mode is enabled on the device disabled(2): fanless mode is disabled on the device. The default value is disabled (2) . Note: that Fanless mode can be applicable to ICX7150-24P and ICX7150-48P only
| |||||||||||||||||||||
| NsnAgentGbl | 1.3.6.1.4.1.1991.1.1.2.1 | ||||||||||||||||||||
| SsnAgReload | 1.3.6.1.4.1.1991.1.1.2.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Action object to reboot the agent. The following values can only be read: other(1).....agent in unknown or other state running(2)...agent running busy(4).......reload not allowed at this time, flash is busy The following value can be written: reset(3).....do a hard reset The agent will return a response before the action occurs.
| |||||||||||||||||||||
| SsnAgEraseNVRAM | 1.3.6.1.4.1.1991.1.1.2.1.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Action object to erase NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation failed or bad flash erasing(4)...agent is erasing NVRAM flash busy(5).......operation not allowed at this time, flash is busy The following value can be written: erase(3).....do erase The agent will return a response even before the erase is done. And the read value will be erasing until erase is done. And the erase request will be rejected until error or normal.
| |||||||||||||||||||||
| SsnAgWriteNVRAM | 1.3.6.1.4.1.1991.1.1.2.1.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Action object to save all configuration info to NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation failed or bad flash writing(4)...agent is writing NVRAM flash busy(5).......operation not allowed at this time, flash is busy The following value can be written: write(3).....do write The agent will return a response even before the write is done. And the read value will be writing until write is done. And the write request will be rejected until error or normal.
| |||||||||||||||||||||
| SsnAgConfigFromNVRAM | 1.3.6.1.4.1.1991.1.1.2.1.4 | INTEGER | NA | ||||||||||||||||||
scalar · INTEGER · not-accessible · current Action object to config the switch from NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation failed or bad flash configing(4)...configing from NVRAM flash is in process. busy(5).......operation not allowed at this time, flash is busy The following value can be written: config(3).....do config The agent will return a response after config is done.
| |||||||||||||||||||||
| SsnAgTftpServerIp | 1.3.6.1.4.1.1991.1.1.2.1.5 | IpAddress | RW | deprecated | |||||||||||||||||
scalar · IpAddress · read-write · deprecated The tftp server address, this will be used for both download/upload image file and config file. | |||||||||||||||||||||
| SsnAgImgFname | 1.3.6.1.4.1.1991.1.1.2.1.6 | DisplayString (SIZE (0..32)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-write · current Name of the image file including path currently associated with the system. When the object is not used, the value is a zero length string. | |||||||||||||||||||||
| SsnAgImgLoad | 1.3.6.1.4.1.1991.1.1.2.1.7 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Action object to down/up load a new image
to the agent. The following values:
Error values: from normal(1) to operationError(17) and tftpWrongFileType(23).
loading(18) .. operation is in process.
The following values are used for set :
uploadMPPrimary(19)..upload the Primary image from MP flash to tftp server.
downloadMPPrimary(20)..download the Primary image from tftp server to MP flash.
uploadMPSecondary(21)..upload the Secondary image from MP flash to tftp server.
downloadMPSecondary(22)..download the Secondary image from tftp server to MP flash.
downloadSPPrimary(24)..download the Primary image from tftp server to SP flash.
downloadSPSecondary(25)..download the Secondary image from tftp server to SP flash.
uploadMPBootROM(26)..upload the Boot from flash image from MP flash to tftp server.
downloadMPBootROM(27)..download the Boot from flash image from tftp server to MP flash.
uploadMPBootTFTP(28)..upload the Boot from TFTP image from MP flash to tftp server.
downloadMPBootTFTP(29)..download the Boot from TFTP image from tftp server to MP flash.
uploadMPMonitor(30)..upload the Monitor image from MP flash to tftp server.
downloadMPMonitor(31)..download the Monitor image from tftp server to MP flash.
downloadSPBootROM(32)..download the Boot image from tftp server to SP flash.
downloadUfiPrimary(34)..download the Primary UFI image from tftp server to flash.
downloadUfiSecondary(35)..download the Secondary UFI image from tftp server to flash.
MP is the management processor, SP is the switch processor.
The image filename is defined in
snAgImgFname. The tftp server address is defined in snAgTftpServerIp.
Atomic set of snAgImgLoad, snAgImgFname and
snAgTftpServerIp is required to allow down/up load to happen.
And the write request will be rejected during loading until error
or normal.
| |||||||||||||||||||||
| SsnAgCfgFname | 1.3.6.1.4.1.1991.1.1.2.1.8 | DisplayString (SIZE (0..32)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-write · current Name of the config file(s) including path currently associated with the system. Some agents in special situations may support a value which contains multiple file names instead of a single file name. Multiple names are specified as a list of file names separated by semicolons (;). When the object is not used, the value is a zero length string. | |||||||||||||||||||||
| SsnAgCfgLoad | 1.3.6.1.4.1.1991.1.1.2.1.9 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Action object to down/up load a config image to the agent. The following values can be read : Error values: from normal(1) to operationError(17) and tftpWrongFileType(29). loading(18) .. operation is in process. The following value can be used to set: uploadFromFlashToServer(20)..upload the config from flash to tftp server. downloadToFlashFromServer(21)..download the config to flash from tftp server. uploadFromDramToServer(22)..upload the config from DRAM to tftp server. downloadToDramFromServer(23)..download the config to DRAM from tftp server. downloadToDramFromServerOverwrite(30)..download the config to DRAM from tftp server, clear the running-config, and overwrite with the new config. The following value can be used to set: uploadFromFlashToNMS(24)..upload the config from flash to NMS. downloadToFlashFromNMS(25)..download the config to flash from NMS. uploadFromDramToNMS(26)..upload the config from DRAM to NMS. downloadToDramFromNMS(27)..download the config to DRAM from NMS. The config filename is defined in snAgCfgFname. The tftp server address is defined in snAgTftpServerIp. Atomic set of snAgCfgLoad, snAgCfgFname and snAgTftpServerIp is required to allow down/up load to happen. And the write request will be rejected during loading until error or normal. For those NMS commands from (24) to (27), The snAgCfgEosTable MIB must be sent along in one PDU. A seperate write memory cli or set snAgWriteNVRAM is required to save the config to NVRAM.
| |||||||||||||||||||||
| SsnAgDefGwayIp | 1.3.6.1.4.1.1991.1.1.2.1.10 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current The default gateway (router) address. | |||||||||||||||||||||
| SsnAgImgVer | 1.3.6.1.4.1.1991.1.1.2.1.11 | DisplayString (SIZE (0..32)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-only · current The version of the running software in the form 'major.minor.maintenance[letters]'. | |||||||||||||||||||||
| SsnAgFlashImgVer | 1.3.6.1.4.1.1991.1.1.2.1.12 | DisplayString (SIZE (0..32)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-only · current The version of the software image saved in local storage such as flash memory in the form 'major.minor.maintenance[letters]'. If not known or not available, then the value is a zero length string. | |||||||||||||||||||||
| SsnAgGblIfIpAddr | 1.3.6.1.4.1.1991.1.1.2.1.13 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current The interface ip address. | |||||||||||||||||||||
| SsnAgGblIfIpMask | 1.3.6.1.4.1.1991.1.1.2.1.14 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current The interface ip address mask. | |||||||||||||||||||||
| SsnAgGblPassword | 1.3.6.1.4.1.1991.1.1.2.1.15 | DisplayString (SIZE (0..97)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..97)) · read-write · current System Security Access Password and this is only allowed to use for setting but not for reading. An SNMP-Get will get an null string. By default, this object needs to be in the same PDU while doing Set operation some critical SNMP objects. If command 'no snmp-server pw-check' is configured on the device, then this object is not needed in the PDU. The value of this object depends on the authentication method configured for SNMP. If there's no AAA authentication configuration for SNMP, this object will have the enable superuser password. If the AAA authentication for SNMP is configured and has leading method as enable or line, this object will have the corresponding enable or line password. If the switch has AAA authentication for SNMP operation, and the method specified is one of local, TACACS+, or RADIUS, this object will have format '<username> <password>' (note one space character in between). The max size allows concatenation of max 48 octets of username and 48 octets of password, with one blank character | |||||||||||||||||||||
| SsnAgTrpRcvrCurEntry | 1.3.6.1.4.1.1991.1.1.2.1.16 | INTEGER (0..255) | RO | ||||||||||||||||||
scalar · INTEGER (0..255) · read-only · current The current total entries of the Trap Receiver Table are created. | |||||||||||||||||||||
| SsnAgGblDataRetrieveMode | 1.3.6.1.4.1.1991.1.1.2.1.19 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current By default, this mode is set to nextbootCfg(0). The VLAN Table and Port-STP Table data will be retrieved according to this mode. nextbootCfg(0).........the nextboot configuration data are retrieved operationalData(1)..........the current running data are retrieved
| |||||||||||||||||||||
| SsnAgSystemLog | 1.3.6.1.4.1.1991.1.1.2.1.20 | OCTET STRING (SIZE (5)) | RW | ||||||||||||||||||
scalar · OCTET STRING (SIZE (5)) · read-write · current The system log object to indicate whether any Network Management Station(NMS) has login. The first byte of the octet string is the value decribed below and followed by 4 bytes of secret code. login(1)..... a value for a NMS to login. heartbeat(2)... a value for the login NMS periodically to checkin; Otherwise, the Agent will automatically set this object to logout(3) after a timeout period. logout(3).... a value for a NMS to logout. changePassword(4).... a value for the login NMS to change password, only if snAgGblPasswordChangeMode was configured to 'anyMgmtEntity'. changeReadOnlyCommunity(5).... a value for the login NMS to change the read-only community string, only if snAgGblPasswordChangeMode was configured to 'anyMgmtEntity'. changeReadWriteCommunity(6).... a value for the login NMS to change the read-write community string, only if snAgGblPasswordChangeMode was configured to 'anyMgmtEntity'. | |||||||||||||||||||||
| SsnAgGblEnableColdStartTrap | 1.3.6.1.4.1.1991.1.1.2.1.21 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates whether the SNMP agent process is permitted to generate cold start traps.
| |||||||||||||||||||||
| SsnAgGblEnableLinkUpTrap | 1.3.6.1.4.1.1991.1.1.2.1.22 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates whether the SNMP agent process is permitted to generate link up traps.
| |||||||||||||||||||||
| SsnAgGblEnableLinkDownTrap | 1.3.6.1.4.1.1991.1.1.2.1.23 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates whether the SNMP agent process is permitted to generate link down traps.
| |||||||||||||||||||||
| SsnAgGblPasswordChangeMode | 1.3.6.1.4.1.1991.1.1.2.1.24 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Specify which management entity is allowed to change the password. 'anyMgmtEntity' management entities are SNMP management station, console command line interface, and telnet command line interface. For security reason, this object can only be modified by console command line interface or telnet command line interface. The default value is 'consoleAndTelnet', of which both console and telnet command line interfaces are allowed to change the password.
| |||||||||||||||||||||
| SsnAgGblReadOnlyCommunity | 1.3.6.1.4.1.1991.1.1.2.1.25 | DisplayString (SIZE (0..32)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-write · current SNMP read community string and this is only allowed to use for setting but not for reading. An SNMP-Get will get an zero length string. Set operation on this object is allowed only if command 'password-change any' is configured on the target device. | |||||||||||||||||||||
| SsnAgGblReadWriteCommunity | 1.3.6.1.4.1.1991.1.1.2.1.26 | DisplayString (SIZE (0..32)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-write · current SNMP read-write community string and this is only allowed to use for setting but not for reading. An SNMP-Get will get an zero length string. Set operation on this object is allowed only if command 'password-change any' is configured on the target device. | |||||||||||||||||||||
| SsnAgGblCurrentSecurityLevel | 1.3.6.1.4.1.1991.1.1.2.1.27 | INTEGER (0..5) | RO | ||||||||||||||||||
scalar · INTEGER (0..5) · read-only · current This represnts the current log-in security level. Each level of security requires a password to permit user for different system configurations. | |||||||||||||||||||||
| SsnAgGblSecurityLevelSet | 1.3.6.1.4.1.1991.1.1.2.1.28 | INTEGER (0..5) | RW | ||||||||||||||||||
scalar · INTEGER (0..5) · read-write · current This shows which the security level password to be set. | |||||||||||||||||||||
| SsnAgGblLevelPasswordsMask | 1.3.6.1.4.1.1991.1.1.2.1.29 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current This shows the bitmap of level passwords which successfully assigned to the system. | |||||||||||||||||||||
| SsnAgGblQueueOverflow | 1.3.6.1.4.1.1991.1.1.2.1.30 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current false - The device queues are not overflow. true - The device queues are overflow.
| |||||||||||||||||||||
| SsnAgGblBufferShortage | 1.3.6.1.4.1.1991.1.1.2.1.31 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current false - The device buffers are adequate. true - The device buffers are in shortage.
| |||||||||||||||||||||
| SsnAgGblDmaFailure | 1.3.6.1.4.1.1991.1.1.2.1.32 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current false - The device DMAs are in good condition. true - One of the DMAs in the device fails.
| |||||||||||||||||||||
| SsnAgGblResourceLowWarning | 1.3.6.1.4.1.1991.1.1.2.1.33 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current false - No, the device does not have resource-low-warning. true - Yes, the device does have resource-low-warning.
| |||||||||||||||||||||
| SsnAgGblExcessiveErrorWarning | 1.3.6.1.4.1.1991.1.1.2.1.34 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current false - No, the device does not have any excessive collision, FCS errors, alignment warning etc. true - Yes, the device does have.
| |||||||||||||||||||||
| SsnAgGblCpuUtilData | 1.3.6.1.4.1.1991.1.1.2.1.35 | Gauge32 | RO | ||||||||||||||||||
scalar · Gauge32 · read-only · current The statistics collection of utilization of the CPU in the device. Reading this object resets all the counters. Therefore, a user need not set snAgGblUtilCollect. | |||||||||||||||||||||
| SsnAgGblCpuUtilCollect | 1.3.6.1.4.1.1991.1.1.2.1.36 | INTEGER | RW | deprecated | |||||||||||||||||
scalar · INTEGER · read-write · deprecated enable(1) - The beginning of statistics collection of utilization of the CPU in the device. disable(0) - The end of statistics collection of utilization of the CPU in the device. This object is deprecated. User need not set this object. User can read snAgGblCpuUtilData to reset all the counters.
| |||||||||||||||||||||
| SsnAgGblTelnetTimeout | 1.3.6.1.4.1.1991.1.1.2.1.37 | INTEGER (0..240) | RW | ||||||||||||||||||
scalar · INTEGER (0..240) · read-write · current Telnet session idling timeout value. Writing value 0 to this object never timeouts any telnet sessions. Each value unit is one minute. | |||||||||||||||||||||
| SsnAgGblEnableWebMgmt | 1.3.6.1.4.1.1991.1.1.2.1.38 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/disable web management.
| |||||||||||||||||||||
| SsnAgGblSecurityLevelBinding | 1.3.6.1.4.1.1991.1.1.2.1.39 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current This represnts the binding of a given password to which security level. A value of 255 indicates an invalid binding. | |||||||||||||||||||||
| SsnAgGblEnableSLB | 1.3.6.1.4.1.1991.1.1.2.1.40 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Enable/disable Server Load Balancing.
| |||||||||||||||||||||
| SsnAgSoftwareFeature | 1.3.6.1.4.1.1991.1.1.2.1.41 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current A bit string representing the software feature of the running switch/router image. These features were conditional compiled to different product images. For each bit, exist feature has a value of 1, but non-exist feature has a value of 0. octet 0, bit 0 - RMON octet 0, bit 1 - ipx switching octet 0, bit 2 - server load balancing octet 0, bit 3 - layer 3 filter in switch octet 0, bit 4 - ipx routing octet 0, bit 5 - appletalk routing octet 0, bit 6 - ip multicast routing octet 0, bit 7 - local access control octet 1, bit 0 - BGP routing octet 1, bit 1 - loopback interface octet 1, bit 2 - BigIron multi-management module octet 1, bit 3 - BigIron SYSIF II octet 1, bit 4 - BigIron POS support octet 1, bit 5 - appletalk cable vlan octet 1, bit 6 - 64 subnet octet 1, bit 7 - multi-slot trunk octet 2, bit 0 - TACACS octet 2, bit 1 - Gigabit Ethernet port auto-negotiation mode octet 2, bit 2 - FSRP octet 2, bit 3 - Exodus requested OSPF enhancement octet 2, bit 4 - OSPF NSSA octet 2, bit 5 - POS octet 2, bit 6 - QOS octet 2, bit 7 - Single Span octet 3, bit 0 - Fast Span octet 3, bit 1 - Base L3 octet 3, bit 2 - static log buffer octet 3, bit 3 - L2 POS octet 3, bit 4 - BI15K octet 3, bit 5 - L2 ATM octet 3, bit 6 - ATM octet 3, bit 7 - NETFLOW octet 4, bit 0 - SFLOW octet 4, bit 1 - GVRP octet 4, bit 2 - GARP octet 4, bit 3 - dynamic trunk octet 4, bit 4 - IGC 8G octet 4, bit 5 - rate limit octet 4, bit 6 - IPC rate limit octet 4, bit 7 - MPLS octet 5, bit 0 - ISIS octet 5, bit 1 - link aggregation octet 5, bit 2 - port dual mode octet 5, bit 3 - private vlan octet 5, bit 4 - MBGP octet 5, bit 5 - ipv6 protocol vlan octet 5, bit 6 - X10G octet 5, bit 7 - fastiron edge switch/router (gridiron) octet 6, bit 0 - FDP octet 6, bit 1 - port tag type octet 6, bit 2 - wireless capable octet 6, bit 3 - snSwPortVlanId object has changed from read-only to read-write octet 6, bit 4 - LLDP Bit 0 is the least significant bit of an octet, and bit 7 is the most significant bit of an octet. | |||||||||||||||||||||
| SsnAgGblEnableModuleInsertedTrap | 1.3.6.1.4.1.1991.1.1.2.1.42 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates whether the SNMP agent process is permitted to generate hardware module inserted to chassis traps.
| |||||||||||||||||||||
| SsnAgGblEnableModuleRemovedTrap | 1.3.6.1.4.1.1991.1.1.2.1.43 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates whether the SNMP agent process is permitted to generate hardware module removed from chassis traps.
| |||||||||||||||||||||
| SsnAgGblTrapMessage | 1.3.6.1.4.1.1991.1.1.2.1.44 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current A generic trap message string. | |||||||||||||||||||||
| SsnAgGblEnableTelnetServer | 1.3.6.1.4.1.1991.1.1.2.1.45 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable or disable telnet server in device.
| |||||||||||||||||||||
| SsnAgGblTelnetPassword | 1.3.6.1.4.1.1991.1.1.2.1.46 | DisplayString (SIZE (0..48)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..48)) · read-write · current Telnet Access Password and this is only useful for write operation. A read operation get a null string. Set operation on this object is allowed only if command 'password-change any' is configured on the target device. Another configuration affecting this is 'no snmp-server pw-check'. If its configured on the device, there's no need to pass another varbind snAgGblPassword. By default, 'snmp-server pw-check' is true, and thus needs to have snAgGblPassword along with this object. in the same Set PDU. | |||||||||||||||||||||
| SsnAgBuildDate | 1.3.6.1.4.1.1991.1.1.2.1.47 | DisplayString (SIZE (0..32)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-only · current The date of the built software. | |||||||||||||||||||||
| SsnAgBuildtime | 1.3.6.1.4.1.1991.1.1.2.1.48 | DisplayString (SIZE (0..32)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-only · current The time of the built software. | |||||||||||||||||||||
| SsnAgBuildVer | 1.3.6.1.4.1.1991.1.1.2.1.49 | DisplayString (SIZE (0..32)) | RO | ce06200e | |||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-only · current The version of the built software in the form 'major.minor.maintenance[letters]'. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SsnAgGblCpuUtil1SecAvg | 1.3.6.1.4.1.1991.1.1.2.1.50 | Gauge32 | RO | ||||||||||||||||||
scalar · Gauge32 · read-only · current The statistics collection of 1 second CPU utilization. | |||||||||||||||||||||
| SsnAgGblCpuUtil5SecAvg | 1.3.6.1.4.1.1991.1.1.2.1.51 | Gauge32 | RO | ||||||||||||||||||
scalar · Gauge32 · read-only · current The statistics collection of 5 second CPU utilization. | |||||||||||||||||||||
| SsnAgGblCpuUtil1MinAvg | 1.3.6.1.4.1.1991.1.1.2.1.52 | Gauge32 | RO | ||||||||||||||||||
scalar · Gauge32 · read-only · current The statistics collection of 1 minute CPU utilization. | |||||||||||||||||||||
| SsnAgGblDynMemUtil | 1.3.6.1.4.1.1991.1.1.2.1.53 | Gauge32 | RO | deprecated | |||||||||||||||||
scalar · Gauge32 · read-only · deprecated The system dynamic memory utilization, in unit of percentage. Deprecated: Refer to snAgSystemDRAMUtil | |||||||||||||||||||||
| SsnAgGblDynMemTotal | 1.3.6.1.4.1.1991.1.1.2.1.54 | Gauge32 | RO | deprecated | 536870912 | ||||||||||||||||
scalar · Gauge32 · read-only · deprecated The total amount of system dynamic memory, in number of bytes. Deprecated: Refer to snAgSystemDRAMTotal Example values from LibreNMS test devices
| |||||||||||||||||||||
| SsnAgGblDynMemFree | 1.3.6.1.4.1.1991.1.1.2.1.55 | Gauge32 | RO | deprecated | 34235362 | ||||||||||||||||
scalar · Gauge32 · read-only · deprecated The free amount of system dynamic memory, in number of bytes. Deprecated: Refer to snAgSystemDRAMFree Example values from LibreNMS test devices
| |||||||||||||||||||||
| SsnAgImgLoadSPModuleType | 1.3.6.1.4.1.1991.1.1.2.1.56 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The switch processor module type of which that receives the downloaded image.
| |||||||||||||||||||||
| SsnAgImgLoadSPModuleNumber | 1.3.6.1.4.1.1991.1.1.2.1.57 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current The slot numner of a switch processor module that receives the downloaded image. Setting value 0 applies to all SP modules. | |||||||||||||||||||||
| SsnAgTrapHoldTime | 1.3.6.1.4.1.1991.1.1.2.1.58 | INTEGER (1..600) | RW | ||||||||||||||||||
scalar · INTEGER (1..600) · read-write · current The time in seconds for which traps will be witheld during system initialization. | |||||||||||||||||||||
| SsnAgSFlowSourceInterface | 1.3.6.1.4.1.1991.1.1.2.1.59 | InterfaceIndex | RW | ||||||||||||||||||
scalar · InterfaceIndex · read-write · current Use the ifIndex value here to specify the source interface to be used for sFlow packets. The interface should have IP address configured on it. Value of 0 indicates that source interface has not been configured for sFlow. Port 65534 is used to specify a null port. | |||||||||||||||||||||
| SsnAgGblTelnetLoginTimeout | 1.3.6.1.4.1.1991.1.1.2.1.60 | INTEGER (1..10) | RW | ||||||||||||||||||
scalar · INTEGER (1..10) · read-write · current Telnet session login timeout value in minutes. Default is 2 minutes. | |||||||||||||||||||||
| SsnAgGblBannerExec | 1.3.6.1.4.1.1991.1.1.2.1.61 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current EXEC process creation banner. Insert newlines using '\n' within the string. | |||||||||||||||||||||
| SsnAgGblBannerIncoming | 1.3.6.1.4.1.1991.1.1.2.1.62 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current Incoming terminal line banner. Insert newlines using '\n' within the string. | |||||||||||||||||||||
| SsnAgGblBannerMotd | 1.3.6.1.4.1.1991.1.1.2.1.63 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current Message-of-the-day banner. Insert newlines using '\n' within the string. | |||||||||||||||||||||
| SsnAgWebMgmtServerTcpPort | 1.3.6.1.4.1.1991.1.1.2.1.64 | INTEGER (1..65535) | RW | ||||||||||||||||||
scalar · INTEGER (1..65535) · read-write · current The TCP port number of web management interface. | |||||||||||||||||||||
| SsnAgTftpServerAddrType | 1.3.6.1.4.1.1991.1.1.2.1.65 | InetAddressType | RW | ||||||||||||||||||
scalar · InetAddressType · read-write · current TFTP server IP address Type. Supported address types are ipv4(1) and ipv6(2) | |||||||||||||||||||||
| SsnAgTftpServerAddr | 1.3.6.1.4.1.1991.1.1.2.1.66 | InetAddress | RW | ||||||||||||||||||
scalar · InetAddress · read-write · current TFTP server IP address. | |||||||||||||||||||||
| SsnAgGblPasswordCheckMode | 1.3.6.1.4.1.1991.1.1.2.1.68 | EnabledStatus | RO | ||||||||||||||||||
scalar · EnabledStatus · read-only · current enabled(1) - The password checking for SNMP set requests is enabled. The default value is enable. disabled(2) - The password checking for SNMP set requests is disabled. When enabled all image/file related MIB object set requests PDU must include the password using the snAgGblPassword. | |||||||||||||||||||||
| SsnAgGblEnableTelnetAuthentication | 1.3.6.1.4.1.1991.1.1.2.1.69 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable or disable telnet authentication in device.
| |||||||||||||||||||||
| SsnAgGblManager2FactorAuthentication | 1.3.6.1.4.1.1991.1.1.2.1.70 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current enabled(1) - The manager two-factor authentication is enabled. Only revSSH access through SZ is allowed and all incoming SSH sessions to device are closed when two-factor authentication is enabled. disabled(0) - The manager two-factor authentication is disabled. SSH access to device from sources other than SZ is allowed after manager two-factor authentication is disabled
| |||||||||||||||||||||
| NsnAgentBrd | 1.3.6.1.4.1.1991.1.1.2.2 | ||||||||||||||||||||
| TsnAgentBrdTable | 1.3.6.1.4.1.1991.1.1.2.2.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of each physical board information. | |||||||||||||||||||||
| RsnAgentBrdEntry | 1.3.6.1.4.1.1991.1.1.2.2.1.1 | NA | |||||||||||||||||||
| CsnAgentBrdIndex | 1.3.6.1.4.1.1991.1.1.2.2.1.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The index to the Agent Interface Table. | |||||||||||||||||||||
| CsnAgentBrdMainBrdDescription | 1.3.6.1.4.1.1991.1.1.2.2.1.1.2 | DisplayString (SIZE (0..128)) | RO | 24x1G Fiber Ports Virtual Module | |||||||||||||||||
column · DisplayString (SIZE (0..128)) · read-only · current The main board description string. | |||||||||||||||||||||
| CsnAgentBrdMainBrdId | 1.3.6.1.4.1.1991.1.1.2.2.1.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The main board identifier, which can uniquely identify a board type. It is an encoded octet string with the following meaning: octet 0 - octet string format version, which identifies the format of this string. If format version octet has the value 2, the octets after the version octet have the following meaning: octet 1 - product type: BI_WG 0x57 BI_BB 0x42 BI_NI 0x4E BI_NI2 0x32 NI_M4 0x4D BI_SLB 0x53 octet 2 - module type: MASTER_FIBER_8G 0x0 MASTER_FIBER_4G 0x1 MASTER_COPPER_16 0x2 SLAVE_FIBER_4G 0x3 FI_MASTER_FIBER_2G 0x4 FI_MASTER_FIBER_4G 0x5 MASTER_COPPER_8G 0x6 FI_MASTER_FIBER_8G 0x7 SLAVE_FIBER_8G 0x8 MASTER_COPPER_12_2 0x9 SLAVE_COPPER_24 0xA FI_SLAVE_COPPER_24 0xB SLAVE_100FX_8 0xD SLAVE_100FX_16 0xC SLAVE_COPPER_8G 0xE SLAVE_COPPER_16_2 0xF STACK_FIBER_8G 0x10 STACK_COPPER_8G 0x11 MASTER_FIBER_2G 0x12 SLAVE_100FX_24 0x13 MASTER_FIBER_0G 0x14 POS_622M 0x15 POS_155M 0x16 SLAVE_FIBER_2G 0x17 SLAVE_COPPER_2G 0x18 FI_SLAVE_FIBER_2G 0x19 FI_SLAVE_FIBER_4G 0x1A FI_SLAVE_FIBER_8G 0x1B FI_SLAVE_COPPER_8G 0x1C FI_MASTER_COPPER_8G 0x1D POS_155M2P 0x1E FI_MASTER_COPPER_4G 0x1F FI_MASTER_COPPER_2G 0x20 MASTER_COPPER_4G 0x21 MASTER_COPPER_2G 0x22 MASTER_M4_8G 0x23 MASTER_M4_4G 0x24 MASTER_M4_2G 0x25 MASTER_M4_0G 0x26 MASTER_M5_0G 0x27 POS_2488M 0x28 SLAVE_M5_0G 0x29 POS_N2488M 0x2A STACK_IPC_48_2 0x2B SLAVE_NPA_FIBER_4G 0x2C ATM_2PORT 0x2D ATM_4PORT 0x2E SLAVE_FIBER_10G 0x2F STACK_FES_48_2 0x30 STACK_FES_24_2 0x31 STACK_FES_96_4 0x32 STACK_FES_12G 0x33 STACK_FESX_24G 0x34 STACK_FESX_24_2_G 0x35 STACK_FESX_24_1_G 0x36 STACK_FESX_48G 0x37 STACK_FESX_48_2_G 0x38 STACK_FESX_48_1_G 0x39 SUPERX_FI_MGMT 0x40 SUPERX_FI_2P10G 0x41 SUPERX_FI_24GC 0x42 SUPERX_FI_24GF 0x43 SUPERX_FI_2P10G_WAN 0x44 SUPERX_FI_MGMT_II 0x4a SLAVE_JC_48E 0xC3 SLAVE_JC_48T 0xC4 MASTER_JC_M4_8G 0xC5 SLAVE_JC_8G 0xC6 SLAVE_JC_B16GF 0xC8 MASTER_JC_B2404 0xC9 SLAVE_JC_B16GC 0xCA SLAVE_JC_B24FX 0xCE octet 3 - processor type, PVR_M603=3, PVR_M604=4, PVR_M603E=6, PVR_M603EV=7, PVR_M750=8, PVR_M604E=9, PVR_M8245=81 octet 4 to octet 5 - processor speed in MHz octet 6 - MAC type: MAC_NONE=0 MAC_SEEQ_10_100=1, MAC_DEC_10_100=2, MAC_3COM_10_100=3, MAC_X10GMAC_10000=4, MAC_SEEQ_1000=5, MAC_GMAC_1000=6, MAC_VLSI_1000=7 octet 7 - PHY type, PHY_NONE=0, PHY_QSI=1, PHY_BROADCOM=2, PHY_ICS=3, PHY_NATIONAL=4, PHY_LEVEL1=6, PHY_BROADCOM_10_100=7, PHY_LEVEL24=8, PHY_BROADCOM_10000=9 (for 10G), PHY_3COM_10_100=9 (for others) octet 8 - port type, COPPER=0, FIBER=1 octet 9 - fiber port type, NONFIBER=0, SX_FIBER=1, LX_FIBER=2, LHX_FIBER=3, LX_SX_FIBER=4, LHB_FIBER=5 octet 10 to octet 13 - DRAM size in KBytes octet 14 to octet 17 - boot flash size in KBytes octet 18 to octet 21 - code flash size in KBytes octet 22 to octet 27 - serial number. octet 28 - chassis backplane type. chassis4000 = 0x00 chassis8000 = 0x02 chassis15000 = 0x01 chassisFISX = 0x04 Turbo8 = 0x07 (stack2) FastIron2 = 0x06 (stack1) | |||||||||||||||||||||
| CsnAgentBrdMainPortTotal | 1.3.6.1.4.1.1991.1.1.2.2.1.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The total number of ports for the main board. | |||||||||||||||||||||
| CsnAgentBrdExpBrdDescription | 1.3.6.1.4.1.1991.1.1.2.2.1.1.5 | DisplayString (SIZE (0..128)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..128)) · read-only · current The expansion board description string. Expansion board are those boards attaching on the main board. | |||||||||||||||||||||
| CsnAgentBrdExpBrdId | 1.3.6.1.4.1.1991.1.1.2.2.1.1.6 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The expansion board identifier. Expansion board are those boards attaching on the main board. It is an encoded octet string with the following meaning: octet 0 - octet string format version, which identifies the format of this string. If format version octet has the value 1, the octets after the version octet have the following meaning: octet 1 - expansion board type, HUNDRED_MEG_1PORT=1, HUNDRED_MEG_2PORT=2, HUNDRED_MEG_1PORT_COPPER=3, HUNDRED_MEG_2PORT_COPPER=4, HUNDRED_MEG_2PORT_LX=5, GIGA_1PORT=8, GIGA_2PORT=9 octet 2 - fiber port type, NONFIBER=0, SX_FIBER=1, LX_FIBER=2, LHX_FIBER=3, LX_SX_FIBER=4, LHB_FIBER=5 | |||||||||||||||||||||
| CsnAgentBrdExpPortTotal | 1.3.6.1.4.1.1991.1.1.2.2.1.1.7 | INTEGER (0..24) | RO | ||||||||||||||||||
column · INTEGER (0..24) · read-only · current The total number of ports for the expansion board. | |||||||||||||||||||||
| CsnAgentBrdStatusLeds | 1.3.6.1.4.1.1991.1.1.2.2.1.1.8 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated A bit array that contains the value of the front panel status LEDs. This is a bit-map; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 32 that means 32 Ports Status LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (Link off) 1 on (Link on) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 (It was obsoleted after release 07100, replaced by snAgentBrdStatusLedString) | |||||||||||||||||||||
| CsnAgentBrdTrafficLeds | 1.3.6.1.4.1.1991.1.1.2.2.1.1.9 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated A bit array that contains the value of the front panel traffic LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 24 that means 24 Ports Traffic LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (no traffic) 1 on (traffic) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 (It was obsoleted after release 07100, replaced by snAgentBrdTrafficLedString) | |||||||||||||||||||||
| CsnAgentBrdMediaLeds | 1.3.6.1.4.1.1991.1.1.2.2.1.1.10 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated A bit array that contains the value of the front panel media LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 24 that means 24 Ports Media LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning --------- ------- 0 half duplex 1 full duplex The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 (It was obsoleted after release 07100, replaced by snAgentBrdMediaLedString) | |||||||||||||||||||||
| CsnAgentBrdSpeedLeds | 1.3.6.1.4.1.1991.1.1.2.2.1.1.11 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated A bit array that contains the value of the front panel media LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 24 that means 24 Ports Speed LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning --------- ------- 0 10 MBit 1 100 MBit The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 (It was obsoleted after release 07100, replaced by snAgentBrdSpeedLedString) | |||||||||||||||||||||
| CsnAgentBrdModuleStatus | 1.3.6.1.4.1.1991.1.1.2.2.1.1.12 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current By default, this mode is set to notActivated(0). moduleEmpty(0) ......... The slot of the chassis is empty. moduleGoingDown(2) ..... The module is going down. moduleRejected(3) ...... The module is being rejected due to wrong configuration. moduleBad(4) ........... The module Hardware is bad. moduleConfigured(8) ...... The module is configured (stacking) moduleComingUp(9) ...... The module is in power-up cycle. moduleRunning(10) ....... The module is running.
| |||||||||||||||||||||
| CsnAgentBrdRedundantStatus | 1.3.6.1.4.1.1991.1.1.2.2.1.1.13 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The redundant status of a module. Non-management module always returns other(1). Management module returns the rest of the states.
| |||||||||||||||||||||
| CsnAgentBrdAlarmLeds | 1.3.6.1.4.1.1991.1.1.2.2.1.1.14 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated A bit array that contains the value of the front panel media LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 24 that means 24 Ports Speed LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning --------- ------- 0 no alarm 1 alarm The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 (It was obsoleted after release 07100, replaced by snAgentBrdAlarmLedString) | |||||||||||||||||||||
| CsnAgentBrdTxTrafficLeds | 1.3.6.1.4.1.1991.1.1.2.2.1.1.15 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated A bit array that contains the value of the front panel transmit traffic LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 24 that means 24 Ports Transmit Traffic LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (no transmit traffic) 1 on (transmit traffic) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 (It was obsoleted after release 07100, replaced by snAgentBrdTxTrafficLedString) | |||||||||||||||||||||
| CsnAgentBrdRxTrafficLeds | 1.3.6.1.4.1.1991.1.1.2.2.1.1.16 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated A bit array that contains the value of the front panel receive traffic LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 24 that means 24 Ports Receive Traffic LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (no receive traffic) 1 on (receive traffic) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 (It was obsoleted after release 07100, replaced by snAgentBrdRxTrafficLedString) | |||||||||||||||||||||
| CsnAgentBrdStatusLedString | 1.3.6.1.4.1.1991.1.1.2.2.1.1.17 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current A bit array that contains the value of the front panel status LEDs. This is a bit-map; each LED is encoded into 1 bit for each switch port. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (Link off) 1 on (Link on) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 -------- | |||||||||||||||||||||
| CsnAgentBrdTrafficLedString | 1.3.6.1.4.1.1991.1.1.2.2.1.1.18 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current A bit array that contains the value of the front panel traffic LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (no traffic) 1 on (traffic) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 -------- | |||||||||||||||||||||
| CsnAgentBrdMediaLedString | 1.3.6.1.4.1.1991.1.1.2.2.1.1.19 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current A bit array that contains the value of the front panel media LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The following shows the meaning of each bit for each switch port: bit value meaning --------- ------- 0 half duplex 1 full duplex The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 --------- | |||||||||||||||||||||
| CsnAgentBrdSpeedLedString | 1.3.6.1.4.1.1991.1.1.2.2.1.1.20 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current A bit array that contains the value of the front panel media LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The following shows the meaning of each bit for each switch port: bit value meaning --------- ------- 0 10 MBit 1 100 MBit The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 --------- | |||||||||||||||||||||
| CsnAgentBrdAlarmLedString | 1.3.6.1.4.1.1991.1.1.2.2.1.1.21 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current A bit array that contains the value of the front panel media LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit for each switch port. The following shows the meaning of each bit for each switch port: bit value meaning --------- ------- 0 no alarm 1 alarm The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 --------- | |||||||||||||||||||||
| CsnAgentBrdTxTrafficLedString | 1.3.6.1.4.1.1991.1.1.2.2.1.1.22 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current A bit array that contains the value of the front panel transmit traffic LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit for each switch port. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (no transmit traffic) 1 on (transmit traffic) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 -------- | |||||||||||||||||||||
| CsnAgentBrdRxTrafficLedString | 1.3.6.1.4.1.1991.1.1.2.2.1.1.23 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current A bit array that contains the value of the front panel receive traffic LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit for each switch port. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (no receive traffic) 1 on (receive traffic) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 -------- | |||||||||||||||||||||
| CsnAgentBrdMemoryTotal | 1.3.6.1.4.1.1991.1.1.2.2.1.1.24 | CounterBasedGauge64 | RO | 2147483648 | |||||||||||||||||
column · CounterBasedGauge64 · read-only · current The total memory in bytes within this module. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsnAgentBrdMemoryAvailable | 1.3.6.1.4.1.1991.1.1.2.2.1.1.25 | CounterBasedGauge64 | RO | 1057001472 | |||||||||||||||||
column · CounterBasedGauge64 · read-only · current The total memory in bytes available for use within this module. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsnAgentBrdSerialNumber | 1.3.6.1.4.1.1991.1.1.2.2.1.1.26 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The Board Serial number. Zero length string indicates that module serial number has not been programmed within EEPROM or the module does not support serial number within EEPROM. | |||||||||||||||||||||
| CsnAgentBrdPartNumber | 1.3.6.1.4.1.1991.1.1.2.2.1.1.27 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The Board Part number. Zero length string indicates that module part number has not been programmed within EEPROM or the module does not support part number within EEPROM. | |||||||||||||||||||||
| TsnAgentBrd2Table | 1.3.6.1.4.1.1991.1.1.2.2.2 | NA | |||||||||||||||||||
table · not-accessible · current A table of each physical board information for each unit. | |||||||||||||||||||||
| RsnAgentBrd2Entry | 1.3.6.1.4.1.1991.1.1.2.2.2.1 | NA | |||||||||||||||||||
| CsnAgentBrd2Unit | 1.3.6.1.4.1.1991.1.1.2.2.2.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The index to the Agent module Table. | |||||||||||||||||||||
| CsnAgentBrd2Slot | 1.3.6.1.4.1.1991.1.1.2.2.2.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The index to the Agent module Table. | |||||||||||||||||||||
| CsnAgentBrd2MainBrdDescription | 1.3.6.1.4.1.1991.1.1.2.2.2.1.3 | DisplayString (SIZE (0..128)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..128)) · read-only · current The main board description string. | |||||||||||||||||||||
| CsnAgentBrd2MainBrdId | 1.3.6.1.4.1.1991.1.1.2.2.2.1.4 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The main board identifier, which can uniquely identify a board type. It is an encoded octet string with the following meaning: octet 0 - octet string format version, which identifies the format of this string. If format version octet has the value 2, the octets after the version octet have the following meaning: octet 1 - product type: BI_WG 0x57 BI_BB 0x42 BI_NI 0x4E BI_NI2 0x32 NI_M4 0x4D BI_SLB 0x53 octet 2 - module type: MASTER_FIBER_8G 0x0 MASTER_FIBER_4G 0x1 MASTER_COPPER_16 0x2 SLAVE_FIBER_4G 0x3 FI_MASTER_FIBER_2G 0x4 FI_MASTER_FIBER_4G 0x5 MASTER_COPPER_8G 0x6 FI_MASTER_FIBER_8G 0x7 SLAVE_FIBER_8G 0x8 MASTER_COPPER_12_2 0x9 SLAVE_COPPER_24 0xA FI_SLAVE_COPPER_24 0xB SLAVE_100FX_8 0xD SLAVE_100FX_16 0xC SLAVE_COPPER_8G 0xE SLAVE_COPPER_16_2 0xF STACK_FIBER_8G 0x10 STACK_COPPER_8G 0x11 MASTER_FIBER_2G 0x12 SLAVE_100FX_24 0x13 MASTER_FIBER_0G 0x14 POS_622M 0x15 POS_155M 0x16 SLAVE_FIBER_2G 0x17 SLAVE_COPPER_2G 0x18 FI_SLAVE_FIBER_2G 0x19 FI_SLAVE_FIBER_4G 0x1A FI_SLAVE_FIBER_8G 0x1B FI_SLAVE_COPPER_8G 0x1C FI_MASTER_COPPER_8G 0x1D POS_155M2P 0x1E FI_MASTER_COPPER_4G 0x1F FI_MASTER_COPPER_2G 0x20 MASTER_COPPER_4G 0x21 MASTER_COPPER_2G 0x22 MASTER_M4_8G 0x23 MASTER_M4_4G 0x24 MASTER_M4_2G 0x25 MASTER_M4_0G 0x26 MASTER_M5_0G 0x27 POS_2488M 0x28 SLAVE_M5_0G 0x29 POS_N2488M 0x2A STACK_IPC_48_2 0x2B SLAVE_NPA_FIBER_4G 0x2C ATM_2PORT 0x2D ATM_4PORT 0x2E SLAVE_FIBER_10G 0x2F STACK_FES_48_2 0x30 STACK_FES_24_2 0x31 STACK_FES_96_4 0x32 STACK_FES_12G 0x33 STACK_FESX_24G 0x34 STACK_FESX_24_2_G 0x35 STACK_FESX_24_1_G 0x36 STACK_FESX_48G 0x37 STACK_FESX_48_2_G 0x38 STACK_FESX_48_1_G 0x39 SUPERX_FI_MGMT 0x40 SUPERX_FI_2P10G 0x41 SUPERX_FI_24GC 0x42 SUPERX_FI_24GF 0x43 SUPERX_FI_2P10G_WAN 0x44 SUPERX_FI_MGMT_II 0x4a SLAVE_JC_48E 0xC3 SLAVE_JC_48T 0xC4 MASTER_JC_M4_8G 0xC5 SLAVE_JC_8G 0xC6 SLAVE_JC_B16GF 0xC8 MASTER_JC_B2404 0xC9 SLAVE_JC_B16GC 0xCA octet 3 - processor type, PVR_M603=3, PVR_M604=4, PVR_M603E=6, PVR_M603EV=7, PVR_M750=8, PVR_M604E=9, PVR_M8245=81 octet 4 to octet 5 - processor speed in MHz octet 6 - MAC type: MAC_NONE=0 MAC_SEEQ_10_100=1, MAC_DEC_10_100=2, MAC_3COM_10_100=3, MAC_X10GMAC_10000=4, MAC_SEEQ_1000=5, MAC_GMAC_1000=6, MAC_VLSI_1000=7 octet 7 - PHY type, PHY_NONE=0, PHY_QSI=1, PHY_BROADCOM=2, PHY_ICS=3, PHY_NATIONAL=4, PHY_LEVEL1=6, PHY_BROADCOM_10_100=7, PHY_LEVEL24=8, PHY_BROADCOM_10000=9 (for 10G), PHY_3COM_10_100=9 (for others) octet 8 - port type, COPPER=0, FIBER=1 octet 9 - fiber port type, NONFIBER=0, SX_FIBER=1, LX_FIBER=2, LHX_FIBER=3, LX_SX_FIBER=4, LHB_FIBER=5 octet 10 to octet 13 - DRAM size in KBytes octet 14 to octet 17 - boot flash size in KBytes octet 18 to octet 21 - code flash size in KBytes octet 22 to octet 27 - serial number. octet 28 - chassis backplane type. chassis4000 = 0x00 chassis8000 = 0x02 chassis15000 = 0x01 chassisFISX = 0x04 Turbo8 = 0x07 (stack2) FastIron2 = 0x06 (stack1) | |||||||||||||||||||||
| CsnAgentBrd2MainPortTotal | 1.3.6.1.4.1.1991.1.1.2.2.2.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The total number of ports for the main board. | |||||||||||||||||||||
| CsnAgentBrd2ModuleStatus | 1.3.6.1.4.1.1991.1.1.2.2.2.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current By default, this mode is set to notActivated(0). moduleEmpty(0) ......... The slot of the chassis is empty. moduleGoingDown(2) ..... The module is going down. moduleRejected(3) ...... The module is being rejected due to wrong configuration. moduleBad(4) ........... The module Hardware is bad. moduleConfigured(8) ...... The module is configured (stacking) moduleComingUp(9) ...... The module is in power-up cycle. moduleRunning(10) ....... The module is running.
| |||||||||||||||||||||
| CsnAgentBrd2RedundantStatus | 1.3.6.1.4.1.1991.1.1.2.2.2.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The redundant status of a module. Non-management module always returns other(1). Management module returns the rest of the states.
| |||||||||||||||||||||
| NsnAgentTrp | 1.3.6.1.4.1.1991.1.1.2.3 | ||||||||||||||||||||
| TsnAgTrpRcvrTable | 1.3.6.1.4.1.1991.1.1.2.3.1 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated A table of managers which to send traps. | |||||||||||||||||||||
| RsnAgTrpRcvrEntry | 1.3.6.1.4.1.1991.1.1.2.3.1.1 | NA | deprecated | ||||||||||||||||||
row · not-accessible · deprecated A row in the trap receiver table. The column snAgTrpRcvrStatus is used to create and delete rows in the table. Creation requires a SET PDU with objects snAgTrpRcvrIndex, snAgTrpRcvrIpAddr, snAgTrpRcvrComm and snAgTrpRcvrStatus.
| |||||||||||||||||||||
| CsnAgTrpRcvrIndex | 1.3.6.1.4.1.1991.1.1.2.3.1.1.1 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated The index to the Trap Receiver Table. | |||||||||||||||||||||
| CsnAgTrpRcvrIpAddr | 1.3.6.1.4.1.1991.1.1.2.3.1.1.2 | IpAddress | RW | deprecated | |||||||||||||||||
column · IpAddress · read-write · deprecated The ip address for SNMP manager that is to receive the trap. | |||||||||||||||||||||
| CsnAgTrpRcvrCommunityOrSecurityName | 1.3.6.1.4.1.1991.1.1.2.3.1.1.3 | OCTET STRING (SIZE (0..32)) | RW | deprecated | |||||||||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · deprecated Community string to use. In case of USM (SNMPv3) security model, this object is used to provide the security name. | |||||||||||||||||||||
| CsnAgTrpRcvrStatus | 1.3.6.1.4.1.1991.1.1.2.3.1.1.4 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated This object is used to create and delete rows in the table and control if they are used. The values that can be written are: ignore(5)...don't use this entry to send traps to at this time delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(5) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: other(1)....some other case valid(2)....the row exists and is valid ignore(5)...don't use this entry to send traps to at this time
| |||||||||||||||||||||
| CsnAgTrpRcvrUDPPort | 1.3.6.1.4.1.1991.1.1.2.3.1.1.5 | INTEGER (0..65535) | RW | deprecated | |||||||||||||||||
column · INTEGER (0..65535) · read-write · deprecated UDP port number of the trap receiver. | |||||||||||||||||||||
| CsnAgTrpRcvrSecurityModel | 1.3.6.1.4.1.1991.1.1.2.3.1.1.6 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Version of trap format to be used.
| |||||||||||||||||||||
| CsnAgTrpRcvrSecurityLevel | 1.3.6.1.4.1.1991.1.1.2.3.1.1.7 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Used for USM (SNMPv3) security model to specify the level of security. The security name is provided by snAgTrpRcvrCommunityOrSecurityName.
| |||||||||||||||||||||
| NsnAgentBoot | 1.3.6.1.4.1.1991.1.1.2.4 | ||||||||||||||||||||
| TsnAgBootSeqTable | 1.3.6.1.4.1.1991.1.1.2.4.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of image load sequnce instructions to the boot code. Boot code will start from instruction of the first valid entry to load the image. If failed, it will use the second valid entry and so on, until a succesful load has completed. Each entry must have an unique instruction, duplicate instructions will be rejected. | |||||||||||||||||||||
| RsnAgBootSeqEntry | 1.3.6.1.4.1.1991.1.1.2.4.1.1 | NA | |||||||||||||||||||
| CsnAgBootSeqIndex | 1.3.6.1.4.1.1991.1.1.2.4.1.1.1 | INTEGER (1..6) | RO | ||||||||||||||||||
column · INTEGER (1..6) · read-only · current The index to the boot sequence table. | |||||||||||||||||||||
| CsnAgBootSeqInstruction | 1.3.6.1.4.1.1991.1.1.2.4.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The instruction for the boot code.
| |||||||||||||||||||||
| CsnAgBootSeqIpAddr | 1.3.6.1.4.1.1991.1.1.2.4.1.1.3 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The ip address of the TFTP server if snAgBootSeqInstruction was set to 'fromTftpServer'; otherwise, this object is not used in any other boot instruction. | |||||||||||||||||||||
| CsnAgBootSeqFilename | 1.3.6.1.4.1.1991.1.1.2.4.1.1.4 | DisplayString (SIZE (0..32)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-write · current The image filename on the TFTP server if snAgBootSeqInstruction was set to 'fromTftpServer'; otherwise, this object is not used in any other boot instruction. | |||||||||||||||||||||
| CsnAgBootSeqRowStatus | 1.3.6.1.4.1.1991.1.1.2.4.1.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current To create or delete a boot sequence table entry.
| |||||||||||||||||||||
| TsnAgSpBootSeqTable | 1.3.6.1.4.1.1991.1.1.2.4.2 | NA | |||||||||||||||||||
table · not-accessible · current A table of image load sequnce instructions to the boot code for the slave (line) modules. Boot code will start from instruction of the first valid entry to load the image. If failed, it will use the second valid entry and so on, until a succesful load has completed. Each entry must have an unique instruction, duplicate instructions will be rejected. | |||||||||||||||||||||
| RsnAgSpBootSeqEntry | 1.3.6.1.4.1.1991.1.1.2.4.2.1 | NA | |||||||||||||||||||
row · not-accessible · current A row in the slave module boot sequence table. | |||||||||||||||||||||
| CsnAgSpBootSeqSpNumber | 1.3.6.1.4.1.1991.1.1.2.4.2.1.1 | INTEGER (0..32) | NA | ||||||||||||||||||
column · INTEGER (0..32) · not-accessible · current The slot numner of a slave/witch processor module for which this boot sequence applies. Setting value 0 applies to all SP modules. Index 0 is valid only for setting to simplify the set operation for all the modules. | |||||||||||||||||||||
| CsnAgSpBootSeqIndex | 1.3.6.1.4.1.1991.1.1.2.4.2.1.2 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current The index to the boot sequence table. | |||||||||||||||||||||
| CsnAgSpBootSeqInstruction | 1.3.6.1.4.1.1991.1.1.2.4.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The instruction for the boot code.
| |||||||||||||||||||||
| CsnAgSpBootSeqIpAddr | 1.3.6.1.4.1.1991.1.1.2.4.2.1.4 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The ip address of the TFTP server if snAgBootSeqInstruction was set to 'fromTftpServer'; otherwise, this object is not used in any other boot instruction. | |||||||||||||||||||||
| CsnAgSpBootSeqFilename | 1.3.6.1.4.1.1991.1.1.2.4.2.1.5 | DisplayString (SIZE (0..32)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-write · current The image filename on the TFTP server if snAgBootSeqInstruction was set to 'fromTftpServer'; otherwise, this object is not used in any other boot instruction. | |||||||||||||||||||||
| CsnAgSpBootSeqRowStatus | 1.3.6.1.4.1.1991.1.1.2.4.2.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current To create or delete a boot sequence table entry.
| |||||||||||||||||||||
| NsnAgCfgEos | 1.3.6.1.4.1.1991.1.1.2.5 | ||||||||||||||||||||
| TsnAgCfgEosTable | 1.3.6.1.4.1.1991.1.1.2.5.1 | NA | |||||||||||||||||||
table · not-accessible · current This table represents the fragmented Configuration File data packet with checksum include in each rows of this table. A SNMP-SET represents configuration file download, and a SNMP-GET represents configuration file upload. This action is only if the SNMP-SET of snAgCfgLoad command is sent along with this table consecutively. The applicable snAgCfgLoad command value is as followings: uploadFromFlashToNMS(23), downloadToFlashFromNMS(24), uploadFromDramToNMS(25), downloadToDramFromNMS(26). | |||||||||||||||||||||
| RsnAgCfgEosEntry | 1.3.6.1.4.1.1991.1.1.2.5.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An EOS row in the table of encoded octet strings for table snAgCfgEosTable.
| |||||||||||||||||||||
| CsnAgCfgEosIndex | 1.3.6.1.4.1.1991.1.1.2.5.1.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Each VLAN EOS Buffer Identifier have a multiple VLAN table entries. | |||||||||||||||||||||
| CsnAgCfgEosPacket | 1.3.6.1.4.1.1991.1.1.2.5.1.1.2 | OCTET STRING (SIZE (0..1000)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..1000)) · read-write · current An encoded octet string. On reads it contains an integral number of configuration file data packets. The size of each encoded octet string is less than or equal to 1400 bytes. | |||||||||||||||||||||
| CsnAgCfgEosChkSum | 1.3.6.1.4.1.1991.1.1.2.5.1.1.3 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current A checksum of each configuration file data packet. | |||||||||||||||||||||
| NsnAgentLog | 1.3.6.1.4.1.1991.1.1.2.6 | ||||||||||||||||||||
| NsnAgSysLogGbl | 1.3.6.1.4.1.1991.1.1.2.6.1 | ||||||||||||||||||||
| SsnAgSysLogGblEnable | 1.3.6.1.4.1.1991.1.1.2.6.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/disable system logging.
| |||||||||||||||||||||
| SsnAgSysLogGblBufferSize | 1.3.6.1.4.1.1991.1.1.2.6.1.2 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current The number of dynamic system logging entries. | |||||||||||||||||||||
| SsnAgSysLogGblClear | 1.3.6.1.4.1.1991.1.1.2.6.1.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Clear dynamic and/or static system logging buffers.
| |||||||||||||||||||||
| SsnAgSysLogGblCriticalLevel | 1.3.6.1.4.1.1991.1.1.2.6.1.4 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Filter events going to the logging buffer. This is a packed bit string object of which each bit has the following meaning: (bit 0 is the least significant bit). bit position meaning ------------ ------- 8-31 reserved 7 Warning (warning conditions) 6 Notification (normal but significant conditions) 5 Informational (informational messages) 4 Error (error conditions) 3 Emergency (system is unusable) 2 Debugging (debugging messages) 1 Critical (critical conditions) 0 Alert (immediate action needed) Setting a critical level bit to 1 makes the logging buffer accept the corresponding event. Resetting a critical level bit to 0 makes the logging buffer reject the corresponding event. | |||||||||||||||||||||
| SsnAgSysLogGblLoggedCount | 1.3.6.1.4.1.1991.1.1.2.6.1.5 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current The number events logged in the system logging buffer. | |||||||||||||||||||||
| SsnAgSysLogGblDroppedCount | 1.3.6.1.4.1.1991.1.1.2.6.1.6 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current The number of events dropped. | |||||||||||||||||||||
| SsnAgSysLogGblFlushedCount | 1.3.6.1.4.1.1991.1.1.2.6.1.7 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current The number of times that the system logging buffer was cleared. | |||||||||||||||||||||
| SsnAgSysLogGblOverrunCount | 1.3.6.1.4.1.1991.1.1.2.6.1.8 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current The number of times that the system logging buffer was wrapped around. | |||||||||||||||||||||
| SsnAgSysLogGblServer | 1.3.6.1.4.1.1991.1.1.2.6.1.9 | IpAddress | RW | deprecated | |||||||||||||||||
scalar · IpAddress · read-write · deprecated IP address of syslog server. | |||||||||||||||||||||
| SsnAgSysLogGblFacility | 1.3.6.1.4.1.1991.1.1.2.6.1.10 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Facility code.
| |||||||||||||||||||||
| SsnAgSysLogGblPersistenceEnable | 1.3.6.1.4.1.1991.1.1.2.6.1.11 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/disable system logging persistence.
| |||||||||||||||||||||
| TsnAgSysLogBufferTable | 1.3.6.1.4.1.1991.1.1.2.6.2 | NA | |||||||||||||||||||
table · not-accessible · current Dynamic system logging buffer table. | |||||||||||||||||||||
| RsnAgSysLogBufferEntry | 1.3.6.1.4.1.1991.1.1.2.6.2.1 | NA | |||||||||||||||||||
row · not-accessible · current A row in the dynamic system logging buffer table. | |||||||||||||||||||||
| CsnAgSysLogBufferIndex | 1.3.6.1.4.1.1991.1.1.2.6.2.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The index to the dynamic system logging buffer table. | |||||||||||||||||||||
| CsnAgSysLogBufferTimeStamp | 1.3.6.1.4.1.1991.1.1.2.6.2.1.2 | TimeTicks | RO | ||||||||||||||||||
column · TimeTicks · read-only · current A time stamp when the event is logged. | |||||||||||||||||||||
| CsnAgSysLogBufferCriticalLevel | 1.3.6.1.4.1.1991.1.1.2.6.2.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The critical level of this event.
| |||||||||||||||||||||
| CsnAgSysLogBufferMessage | 1.3.6.1.4.1.1991.1.1.2.6.2.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The system logging message. | |||||||||||||||||||||
| CsnAgSysLogBufferCalTimeStamp | 1.3.6.1.4.1.1991.1.1.2.6.2.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current A time stamp when the event is logged. This object returns a NULL terminated time stamp string if the system calendar time was set. It returns a zero length string if the system calendar time was not set. | |||||||||||||||||||||
| TsnAgStaticSysLogBufferTable | 1.3.6.1.4.1.1991.1.1.2.6.3 | NA | |||||||||||||||||||
table · not-accessible · current Static system logging buffer table. | |||||||||||||||||||||
| RsnAgStaticSysLogBufferEntry | 1.3.6.1.4.1.1991.1.1.2.6.3.1 | NA | |||||||||||||||||||
row · not-accessible · current A row in the static system logging buffer table. | |||||||||||||||||||||
| CsnAgStaticSysLogBufferIndex | 1.3.6.1.4.1.1991.1.1.2.6.3.1.1 | INTEGER (1..100) | RO | ||||||||||||||||||
column · INTEGER (1..100) · read-only · current The index to the static system logging buffer table. | |||||||||||||||||||||
| CsnAgStaticSysLogBufferTimeStamp | 1.3.6.1.4.1.1991.1.1.2.6.3.1.2 | TimeTicks | RO | ||||||||||||||||||
column · TimeTicks · read-only · current A time stamp when the event is logged. | |||||||||||||||||||||
| CsnAgStaticSysLogBufferCriticalLevel | 1.3.6.1.4.1.1991.1.1.2.6.3.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The critical level of this event.
| |||||||||||||||||||||
| CsnAgStaticSysLogBufferMessage | 1.3.6.1.4.1.1991.1.1.2.6.3.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The system logging message. | |||||||||||||||||||||
| CsnAgStaticSysLogBufferCalTimeStamp | 1.3.6.1.4.1.1991.1.1.2.6.3.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current A time stamp when the event is logged. This object returns a NULL terminated time stamp string if the system calendar time was set. It returns a zero length string if the system calendar time was not set. | |||||||||||||||||||||
| TsnAgSysLogServerTable | 1.3.6.1.4.1.1991.1.1.2.6.4 | NA | |||||||||||||||||||
table · not-accessible · current System Log Server table. | |||||||||||||||||||||
| RsnAgSysLogServerEntry | 1.3.6.1.4.1.1991.1.1.2.6.4.1 | NA | |||||||||||||||||||
row · not-accessible · current A row in the SysLog Server table. | |||||||||||||||||||||
| CsnAgSysLogServerIP | 1.3.6.1.4.1.1991.1.1.2.6.4.1.1 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current IP address of syslog server. | |||||||||||||||||||||
| CsnAgSysLogServerUDPPort | 1.3.6.1.4.1.1991.1.1.2.6.4.1.2 | INTEGER (0..65535) | RO | ||||||||||||||||||
column · INTEGER (0..65535) · read-only · current UDP port number of syslog server. | |||||||||||||||||||||
| CsnAgSysLogServerRowStatus | 1.3.6.1.4.1.1991.1.1.2.6.4.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: other(1)....some other case valid(2)....the row exists and is valid
| |||||||||||||||||||||
| NsnAgentSysParaConfig | 1.3.6.1.4.1.1991.1.1.2.7 | ||||||||||||||||||||
| TsnAgentSysParaConfigTable | 1.3.6.1.4.1.1991.1.1.2.7.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of Agent of each board. | |||||||||||||||||||||
| RsnAgentSysParaConfigEntry | 1.3.6.1.4.1.1991.1.1.2.7.1.1 | NA | |||||||||||||||||||
row · not-accessible · current A row in the Agent System Parameters Configuation table. | |||||||||||||||||||||
| CsnAgentSysParaConfigIndex | 1.3.6.1.4.1.1991.1.1.2.7.1.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The index to the Agent System Parameters Configuation Table. | |||||||||||||||||||||
| CsnAgentSysParaConfigDescription | 1.3.6.1.4.1.1991.1.1.2.7.1.1.2 | DisplayString (SIZE (0..32)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current The main board description string. | |||||||||||||||||||||
| CsnAgentSysParaConfigMin | 1.3.6.1.4.1.1991.1.1.2.7.1.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The minimum value of this Agent System Parameter. | |||||||||||||||||||||
| CsnAgentSysParaConfigMax | 1.3.6.1.4.1.1991.1.1.2.7.1.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The maximum value of this Agent System Parameter. | |||||||||||||||||||||
| CsnAgentSysParaConfigDefault | 1.3.6.1.4.1.1991.1.1.2.7.1.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The default value of this Agent System Parameter. | |||||||||||||||||||||
| CsnAgentSysParaConfigCurrent | 1.3.6.1.4.1.1991.1.1.2.7.1.1.6 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The current configurated value of this Agent System Parameter. | |||||||||||||||||||||
| NsnAgentConfigModule | 1.3.6.1.4.1.1991.1.1.2.8 | ||||||||||||||||||||
| TsnAgentConfigModuleTable | 1.3.6.1.4.1.1991.1.1.2.8.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of each configured module information. | |||||||||||||||||||||
| RsnAgentConfigModuleEntry | 1.3.6.1.4.1.1991.1.1.2.8.1.1 | NA | |||||||||||||||||||
row · not-accessible · current A row in the Agent Configured Module table. | |||||||||||||||||||||
| CsnAgentConfigModuleIndex | 1.3.6.1.4.1.1991.1.1.2.8.1.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The index to the Agent Configured Module Table. | |||||||||||||||||||||
| CsnAgentConfigModuleType | 1.3.6.1.4.1.1991.1.1.2.8.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The Configured Module Type.
| |||||||||||||||||||||
| CsnAgentConfigModuleRowStatus | 1.3.6.1.4.1.1991.1.1.2.8.1.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current To create or delete a configured module table entry.
| |||||||||||||||||||||
| CsnAgentConfigModuleDescription | 1.3.6.1.4.1.1991.1.1.2.8.1.1.4 | DisplayString | RO | 24x1G Fiber Ports Virtual Module | |||||||||||||||||
column · DisplayString · read-only · current A description of the configured module. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsnAgentConfigModuleOperStatus | 1.3.6.1.4.1.1991.1.1.2.8.1.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Module operational status. Zero length string indicates that physical module has not been inserted to the chassis. | |||||||||||||||||||||
| CsnAgentConfigModuleSerialNumber | 1.3.6.1.4.1.1991.1.1.2.8.1.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Module serial number. Zero length string indicates that module serial number EEPROM has not been programmed or the module does not support serial number EEPROM. | |||||||||||||||||||||
| CsnAgentConfigModuleNumberOfPorts | 1.3.6.1.4.1.1991.1.1.2.8.1.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The number of ports of module. | |||||||||||||||||||||
| CsnAgentConfigModuleMgmtModuleType | 1.3.6.1.4.1.1991.1.1.2.8.1.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Management module type.
| |||||||||||||||||||||
| CsnAgentConfigModuleNumberOfCpus | 1.3.6.1.4.1.1991.1.1.2.8.1.1.9 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The number of module CPUs. | |||||||||||||||||||||
| TsnAgentConfigModule2Table | 1.3.6.1.4.1.1991.1.1.2.8.2 | NA | |||||||||||||||||||
table · not-accessible · current A table of each configured stacking module information. | |||||||||||||||||||||
| RsnAgentConfigModule2Entry | 1.3.6.1.4.1.1991.1.1.2.8.2.1 | NA | |||||||||||||||||||
row · not-accessible · current A row in the Agent Configured Stacking Module table. | |||||||||||||||||||||
| CsnAgentConfigModule2Unit | 1.3.6.1.4.1.1991.1.1.2.8.2.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The index to the Agent Configured Module Table. | |||||||||||||||||||||
| CsnAgentConfigModule2Slot | 1.3.6.1.4.1.1991.1.1.2.8.2.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The index to the Agent Configured Module Table. | |||||||||||||||||||||
| CsnAgentConfigModule2Type | 1.3.6.1.4.1.1991.1.1.2.8.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The Configured Module Type.
| |||||||||||||||||||||
| CsnAgentConfigModule2RowStatus | 1.3.6.1.4.1.1991.1.1.2.8.2.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current To create or delete a configured module table entry.
| |||||||||||||||||||||
| CsnAgentConfigModule2Description | 1.3.6.1.4.1.1991.1.1.2.8.2.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current A description of the configured module. | |||||||||||||||||||||
| CsnAgentConfigModule2OperStatus | 1.3.6.1.4.1.1991.1.1.2.8.2.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Module operational status. Zero length string indicates that physical module has not been inserted to the chassis. | |||||||||||||||||||||
| CsnAgentConfigModule2SerialNumber | 1.3.6.1.4.1.1991.1.1.2.8.2.1.7 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Module serial number. Zero length string indicates that module serial number EEPROM has not been programmed or the module does not support serial number EEPROM. | |||||||||||||||||||||
| CsnAgentConfigModule2NumberOfPorts | 1.3.6.1.4.1.1991.1.1.2.8.2.1.8 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The number of ports of module. | |||||||||||||||||||||
| CsnAgentConfigModule2MgmtModuleType | 1.3.6.1.4.1.1991.1.1.2.8.2.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Management module type.
| |||||||||||||||||||||
| CsnAgentConfigModule2NumberOfCpus | 1.3.6.1.4.1.1991.1.1.2.8.2.1.10 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The number of module CPUs. | |||||||||||||||||||||
| NsnAgentUser | 1.3.6.1.4.1.1991.1.1.2.9 | ||||||||||||||||||||
| NsnAgentUserGbl | 1.3.6.1.4.1.1991.1.1.2.9.1 | ||||||||||||||||||||
| SsnAgentUserMaxAccnt | 1.3.6.1.4.1.1991.1.1.2.9.1.1 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current Maximum number of user account entries can be configured. | |||||||||||||||||||||
| TsnAgentUserAccntTable | 1.3.6.1.4.1.1991.1.1.2.9.2 | NA | |||||||||||||||||||
table · not-accessible · current A table of user account information. | |||||||||||||||||||||
| RsnAgentUserAccntEntry | 1.3.6.1.4.1.1991.1.1.2.9.2.1 | NA | |||||||||||||||||||
| CsnAgentUserAccntName | 1.3.6.1.4.1.1991.1.1.2.9.2.1.1 | DisplayString (SIZE (1..48)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (1..48)) · read-only · current The user name. | |||||||||||||||||||||
| CsnAgentUserAccntPassword | 1.3.6.1.4.1.1991.1.1.2.9.2.1.2 | DisplayString (SIZE (0..48)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..48)) · read-write · current The user password. | |||||||||||||||||||||
| CsnAgentUserAccntEncryptCode | 1.3.6.1.4.1.1991.1.1.2.9.2.1.3 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The password encryption method code. | |||||||||||||||||||||
| CsnAgentUserAccntPrivilege | 1.3.6.1.4.1.1991.1.1.2.9.2.1.4 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The user privilege. | |||||||||||||||||||||
| CsnAgentUserAccntRowStatus | 1.3.6.1.4.1.1991.1.1.2.9.2.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current To create or delete a user account table entry.
| |||||||||||||||||||||
| NsnAgentRedundant | 1.3.6.1.4.1.1991.1.1.2.10 | ||||||||||||||||||||
| NsnAgentRedunGbl | 1.3.6.1.4.1.1991.1.1.2.10.1 | ||||||||||||||||||||
| SsnAgentRedunActiveMgmtMod | 1.3.6.1.4.1.1991.1.1.2.10.1.1 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Slot number of the active management module. Setting this object does not take effect immediately. Saving configuration data to flash storage and reboot the system are required to take effect. Setting a value of 0 requests the system to auto-select an active management module after power up. | |||||||||||||||||||||
| SsnAgentRedunSyncConfig | 1.3.6.1.4.1.1991.1.1.2.10.1.2 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Frequency of the backup management module copying the configuration data from the active management module. Each unit is 1 second. Setting a value 0 will disable the synchronization copy. Setting a negative value will initiate the synchronization copy once immediately. | |||||||||||||||||||||
| SsnAgentRedunBkupCopyBootCode | 1.3.6.1.4.1.1991.1.1.2.10.1.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current If enabled(1), the backup management module copies the boot code from the active management module to its boot code flash storage after power up, and whenever the active management module's boot code is updated. The backup management module does not copy if both boot codes were identical.
| |||||||||||||||||||||
| SsnAgentEnableMgmtModRedunStateChangeTrap | 1.3.6.1.4.1.1991.1.1.2.10.1.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates whether the SNMP agent process is permitted to generate management module redundancy state change traps.
| |||||||||||||||||||||
| SsnAgentRedunBkupBootLoad | 1.3.6.1.4.1.1991.1.1.2.10.1.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Action object to down load a new boot code from boot flash storage of the active management module to the backup management module. The following are returned values from get operation: normal(1)............no operation operationError(17)...error codes The following are input values from set operation: downloadBackup(20)...download the boot code from the active management module to the backup management module Any set operation is rejected during loading until error or normal state is reached.
| |||||||||||||||||||||
| SsnAgentRedunSwitchOver | 1.3.6.1.4.1.1991.1.1.2.10.1.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current To force a switch-over from standby to active state if the backup management module exists in a chassis.
| |||||||||||||||||||||
| NsnAgentCpu | 1.3.6.1.4.1.1991.1.1.2.11 | ||||||||||||||||||||
| TsnAgentCpuUtilTable | 1.3.6.1.4.1.1991.1.1.2.11.1 | NA | |||||||||||||||||||
table · not-accessible · current Table to list utilization for all CPUs in the device. | |||||||||||||||||||||
| RsnAgentCpuUtilEntry | 1.3.6.1.4.1.1991.1.1.2.11.1.1 | NA | |||||||||||||||||||
row · not-accessible · current A row in the CPU utilization table. | |||||||||||||||||||||
| CsnAgentCpuUtilSlotNum | 1.3.6.1.4.1.1991.1.1.2.11.1.1.1 | Integer32 | RO | 1 | |||||||||||||||||
| CsnAgentCpuUtilCpuId | 1.3.6.1.4.1.1991.1.1.2.11.1.1.2 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current The id of cpu. For non-VM1/WSM management module, there is one CPU. For VM1/WSM there's one management CPU and three slave CPUs. The management CPU could be turned off. For POS and ATM there's no management CPU but two slave CPUs. Id for management cpu is 1. Value of 2 or greater are for slave CPUs. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsnAgentCpuUtilInterval | 1.3.6.1.4.1.1991.1.1.2.11.1.1.3 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current The value, in seconds, for this utilization. For both management and slave CPU, we display utilization for 1 sec, 5 sec, 60 sec and 300 sec interval. | |||||||||||||||||||||
| CsnAgentCpuUtilValue | 1.3.6.1.4.1.1991.1.1.2.11.1.1.4 | Gauge32 | RO | deprecated | 1 | ||||||||||||||||
column · Gauge32 · read-only · deprecated The statistical CPU utilization in units of one-hundredth of a percent. This value is deprecated. Users are recommended to use snAgentCpuUtilPercent or snAgentCpuUtil100thPercent instead. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsnAgentCpuUtilPercent | 1.3.6.1.4.1.1991.1.1.2.11.1.1.5 | Gauge32 | RO | 11 | |||||||||||||||||
| CsnAgentCpuUtil100thPercent | 1.3.6.1.4.1.1991.1.1.2.11.1.1.6 | Gauge32 | RO | 1100 | |||||||||||||||||
| TsnCpuProcessTable | 1.3.6.1.4.1.1991.1.1.2.11.2 | NA | |||||||||||||||||||
table · not-accessible · current Table to list utilization and runtime for all CPU processes in the device. | |||||||||||||||||||||
| RsnCpuProcessEntry | 1.3.6.1.4.1.1991.1.1.2.11.2.1 | NA | |||||||||||||||||||
| CsnCpuProcessName | 1.3.6.1.4.1.1991.1.1.2.11.2.1.1 | DisplayString (SIZE (1..48)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (1..48)) · read-only · current The process name. | |||||||||||||||||||||
| CsnCpuProcess5SecUtil | 1.3.6.1.4.1.1991.1.1.2.11.2.1.2 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current The statistics collection of last 5 second process utilization. | |||||||||||||||||||||
| CsnCpuProcess1MinUtil | 1.3.6.1.4.1.1991.1.1.2.11.2.1.3 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current The statistics collection of last 1 minute process utilization. | |||||||||||||||||||||
| CsnCpuProcess5MinUtil | 1.3.6.1.4.1.1991.1.1.2.11.2.1.4 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current The statistics collection of last 5 minute process utilization. | |||||||||||||||||||||
| CsnCpuProcess15MinUtil | 1.3.6.1.4.1.1991.1.1.2.11.2.1.5 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current The statistics collection of last 15 minute process utilization. | |||||||||||||||||||||
| CsnCpuProcessRuntime | 1.3.6.1.4.1.1991.1.1.2.11.2.1.6 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Process runtime in milliseconds. | |||||||||||||||||||||
| NsnAgentHw | 1.3.6.1.4.1.1991.1.1.2.12 | ||||||||||||||||||||
| TsnAgentHwICBMCounterTable | 1.3.6.1.4.1.1991.1.1.2.12.1 | NA | |||||||||||||||||||
table · not-accessible · current Table to list the ICBM counter values. This table is not supported on 10G module. | |||||||||||||||||||||
| RsnAgentHwICBMCounterEntry | 1.3.6.1.4.1.1991.1.1.2.12.1.1 | NA | |||||||||||||||||||
row · not-accessible · current A row representing ICBM counter values for that slot. | |||||||||||||||||||||
| CsnAgentHwICBMCounterSlot | 1.3.6.1.4.1.1991.1.1.2.12.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Slot number where ICBM resides. | |||||||||||||||||||||
| CsnAgentHwICBMCounterDMA | 1.3.6.1.4.1.1991.1.1.2.12.1.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current DMA Id within a slot where ICBM resides. Valid only for Jetcore modules. For non-Jetcore modules, this index is ignored by the agent. In this case, value 0 will be returned by the agent. | |||||||||||||||||||||
| CsnAgentHwICBMCounterFreeDepth | 1.3.6.1.4.1.1991.1.1.2.12.1.1.3 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current Current depth of the free queue for this ICBM. | |||||||||||||||||||||
| CsnAgentHwICBMCounterWriteDrop | 1.3.6.1.4.1.1991.1.1.2.12.1.1.4 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Write sequencer drop count for this ICBM. | |||||||||||||||||||||
| CsnAgentHwICBMCounterWriteInput | 1.3.6.1.4.1.1991.1.1.2.12.1.1.5 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Write sequencer input counter for this ICBM. | |||||||||||||||||||||
| CsnAgentHwICBMCounterWriteOutput | 1.3.6.1.4.1.1991.1.1.2.12.1.1.6 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Write sequencer output counter for this ICBM. | |||||||||||||||||||||
| CsnAgentHwICBMCounterReadInput | 1.3.6.1.4.1.1991.1.1.2.12.1.1.7 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Read sequencer input counter for this ICBM. | |||||||||||||||||||||
| CsnAgentHwICBMCounterReadOutput | 1.3.6.1.4.1.1991.1.1.2.12.1.1.8 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Read sequencer output counter for this ICBM. | |||||||||||||||||||||
| TsnCAMIpStatTable | 1.3.6.1.4.1.1991.1.1.2.12.2 | NA | |||||||||||||||||||
table · not-accessible · current Table to list the IP CAM statistics. | |||||||||||||||||||||
| RsnCAMIpStatEntry | 1.3.6.1.4.1.1991.1.1.2.12.2.1 | NA | |||||||||||||||||||
row · not-accessible · current A row representing IP CAM statistics for a given interface and level. | |||||||||||||||||||||
| CsnCAMIpStatIfIndex | 1.3.6.1.4.1.1991.1.1.2.12.2.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current ifIndex value of the local interface. | |||||||||||||||||||||
| CsnCAMIpStatLevel | 1.3.6.1.4.1.1991.1.1.2.12.2.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Level of CAM entry for that interface. | |||||||||||||||||||||
| CsnCAMIpStatFreeEntries | 1.3.6.1.4.1.1991.1.1.2.12.2.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Free entries in the IP CAM for that interface and level. | |||||||||||||||||||||
| CsnCAMIpStatTotalEntries | 1.3.6.1.4.1.1991.1.1.2.12.2.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Total entries in the IP CAM for that interface and level. | |||||||||||||||||||||
| TsnCAMStatTable | 1.3.6.1.4.1.1991.1.1.2.12.3 | NA | |||||||||||||||||||
table · not-accessible · current Table to list the CAM statistics. | |||||||||||||||||||||
| RsnCAMStatEntry | 1.3.6.1.4.1.1991.1.1.2.12.3.1 | NA | |||||||||||||||||||
row · not-accessible · current A row representing CAM statistics for a given DMA Id number.
| |||||||||||||||||||||
| CsnCamStatDMAIdNumber | 1.3.6.1.4.1.1991.1.1.2.12.3.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current DMA Id number. | |||||||||||||||||||||
| CsnCamStatDMAMasterNumber | 1.3.6.1.4.1.1991.1.1.2.12.3.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current DMA Master for that DMA Id. | |||||||||||||||||||||
| CsnCamStatFreePool0Entries | 1.3.6.1.4.1.1991.1.1.2.12.3.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current CAM free pool0 entries. | |||||||||||||||||||||
| CsnCamStatFreePool1Entries | 1.3.6.1.4.1.1991.1.1.2.12.3.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current CAM free pool1 entries. | |||||||||||||||||||||
| CsnCamStatFreePool2Entries | 1.3.6.1.4.1.1991.1.1.2.12.3.1.5 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current CAM free pool2 entries. | |||||||||||||||||||||
| CsnCamStatFreePool3Entries | 1.3.6.1.4.1.1991.1.1.2.12.3.1.6 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current CAM free pool3 entries. | |||||||||||||||||||||
| CsnCamStatFreeL2Entries | 1.3.6.1.4.1.1991.1.1.2.12.3.1.7 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current CAM Free L2 entries. | |||||||||||||||||||||
| CsnCamStatFreeL2LowestSection | 1.3.6.1.4.1.1991.1.1.2.12.3.1.8 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current CAM Free L2 lowest section entries. | |||||||||||||||||||||
| CsnCamStatHostLookupCount | 1.3.6.1.4.1.1991.1.1.2.12.3.1.9 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current CAM host lookup count for router. | |||||||||||||||||||||
| CsnCamStatRouteLookupCount | 1.3.6.1.4.1.1991.1.1.2.12.3.1.10 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current CAM route lookup count for router. | |||||||||||||||||||||
| CsnCamStatLevel1 | 1.3.6.1.4.1.1991.1.1.2.12.3.1.11 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current CAM stat level1 entries for router. | |||||||||||||||||||||
| CsnCamStatLevel2 | 1.3.6.1.4.1.1991.1.1.2.12.3.1.12 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current CAM stat level2 entries for router. | |||||||||||||||||||||
| CsnCamStatLevel3 | 1.3.6.1.4.1.1991.1.1.2.12.3.1.13 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current CAM stat level3 entries for router. | |||||||||||||||||||||
| CsnCamStatMacFailCount | 1.3.6.1.4.1.1991.1.1.2.12.3.1.14 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current CAM MAC fail count. | |||||||||||||||||||||
| CsnCamStatIPRouteFailCount | 1.3.6.1.4.1.1991.1.1.2.12.3.1.15 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current CAM IP route fail count. | |||||||||||||||||||||
| CsnCamStatIPSessionFailCount | 1.3.6.1.4.1.1991.1.1.2.12.3.1.16 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current CAM IP session fail count. | |||||||||||||||||||||
| CsnCamStatIPMCastFailCount | 1.3.6.1.4.1.1991.1.1.2.12.3.1.17 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current CAM IP multicast fail count. | |||||||||||||||||||||
| CsnCamStatL2SessionFailCount | 1.3.6.1.4.1.1991.1.1.2.12.3.1.18 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current CAM L2 session fail count. | |||||||||||||||||||||
| CsnCamStatAddMACCount | 1.3.6.1.4.1.1991.1.1.2.12.3.1.19 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current CAM add MAC count. | |||||||||||||||||||||
| CsnCamStatAddVLANCount | 1.3.6.1.4.1.1991.1.1.2.12.3.1.20 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current CAM add VLAN count. | |||||||||||||||||||||
| CsnCamStatAddIPHostCount | 1.3.6.1.4.1.1991.1.1.2.12.3.1.21 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current CAM add IP host count. | |||||||||||||||||||||
| CsnCamStatAddIPRouteCount | 1.3.6.1.4.1.1991.1.1.2.12.3.1.22 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current CAM add IP route count. | |||||||||||||||||||||
| CsnCamStatAddIPSessionCount | 1.3.6.1.4.1.1991.1.1.2.12.3.1.23 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current CAM add IP session count. | |||||||||||||||||||||
| CsnCamStatAddIPMCastCount | 1.3.6.1.4.1.1991.1.1.2.12.3.1.24 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current CAM add IP multicast count. | |||||||||||||||||||||
| CsnCamStatAddL2SessionCount | 1.3.6.1.4.1.1991.1.1.2.12.3.1.25 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current CAM add L2 session count. | |||||||||||||||||||||
| CsnCamStatAddIPXCount | 1.3.6.1.4.1.1991.1.1.2.12.3.1.26 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current CAM add IPX count. | |||||||||||||||||||||
| CsnCamStatDeleteDMACamCount | 1.3.6.1.4.1.1991.1.1.2.12.3.1.27 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current CAM delete DMA CAM count. | |||||||||||||||||||||
| NsnAgSystemDRAM | 1.3.6.1.4.1.1991.1.1.2.12.4 | ||||||||||||||||||||
| SsnAgSystemDRAMUtil | 1.3.6.1.4.1.1991.1.1.2.12.4.1 | Gauge32 | RO | ||||||||||||||||||
scalar · Gauge32 · read-only · current The system dynamic memory utilization, in unit of percentage. | |||||||||||||||||||||
| SsnAgSystemDRAMTotal | 1.3.6.1.4.1.1991.1.1.2.12.4.2 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The total amount of system dynamic memory, in number of bytes. | |||||||||||||||||||||
| SsnAgSystemDRAMFree | 1.3.6.1.4.1.1991.1.1.2.12.4.3 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The free amount of system dynamic memory, in number of bytes. | |||||||||||||||||||||
| SsnAgSystemDRAMForBGP | 1.3.6.1.4.1.1991.1.1.2.12.4.4 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The free amount of system dynamic memory used by BGP, in number of bytes. | |||||||||||||||||||||
| SsnAgSystemDRAMForOSPF | 1.3.6.1.4.1.1991.1.1.2.12.4.5 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The free amount of system dynamic memory used by OSPF, in number of bytes. | |||||||||||||||||||||
| NsnAgSystemDebug | 1.3.6.1.4.1.1991.1.1.2.12.5 | ||||||||||||||||||||
| SsnAgSystemDebugTotalIn | 1.3.6.1.4.1.1991.1.1.2.12.5.1 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current Total incoming packet count. Sum of Buffer Manager and CPU read count. | |||||||||||||||||||||
| SsnAgSystemDebugTotalOut | 1.3.6.1.4.1.1991.1.1.2.12.5.2 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current Total outgoing packet count. | |||||||||||||||||||||
| SsnAgSystemDebugCpuQueueRead | 1.3.6.1.4.1.1991.1.1.2.12.5.3 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current CPU Queue read count. | |||||||||||||||||||||
| SsnAgSystemDebugDRAMBuffer | 1.3.6.1.4.1.1991.1.1.2.12.5.4 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current DRAM buffer count. | |||||||||||||||||||||
| SsnAgSystemDebugBMBuffer | 1.3.6.1.4.1.1991.1.1.2.12.5.5 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current BM buffer count. | |||||||||||||||||||||
| SsnAgSystemDebugBMFreeBuffer | 1.3.6.1.4.1.1991.1.1.2.12.5.6 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current BM free buffer count. | |||||||||||||||||||||
| SsnAgSystemDebugBMFreeBufferMgmt | 1.3.6.1.4.1.1991.1.1.2.12.5.7 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current BM free buffer management count. | |||||||||||||||||||||
| SsnAgSystemDebugIpcGigLock | 1.3.6.1.4.1.1991.1.1.2.12.5.8 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current IPC GIG lock count. | |||||||||||||||||||||
| SsnAgSystemDebugDRAMGetError | 1.3.6.1.4.1.1991.1.1.2.12.5.9 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current DRAM get error count. | |||||||||||||||||||||
| SsnAgSystemDebugDRAMToBMCopyFail | 1.3.6.1.4.1.1991.1.1.2.12.5.10 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current DRAM to Buffer Manager copy fail count. | |||||||||||||||||||||
| NsnAgentTemp | 1.3.6.1.4.1.1991.1.1.2.13 | ||||||||||||||||||||
| TsnAgentTempTable | 1.3.6.1.4.1.1991.1.1.2.13.1 | NA | |||||||||||||||||||
table · not-accessible · current Table to list temperatures of all the modules in the device. This table is applicable to only those modules with temperature sensors. | |||||||||||||||||||||
| RsnAgentTempEntry | 1.3.6.1.4.1.1991.1.1.2.13.1.1 | NA | |||||||||||||||||||
row · not-accessible · current A row in the module temperature table. | |||||||||||||||||||||
| CsnAgentTempSlotNum | 1.3.6.1.4.1.1991.1.1.2.13.1.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current The slot number of module which contains the temperature sensor represented by this row. | |||||||||||||||||||||
| CsnAgentTempSensorId | 1.3.6.1.4.1.1991.1.1.2.13.1.1.2 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current The temperature sensor identifier of Slave module whose temperature is represented by this row, for management module: sensor#1 - Intake Side Temperature sensor# 2 - Exhaust Side Temperature. | |||||||||||||||||||||
| CsnAgentTempSensorDescr | 1.3.6.1.4.1.1991.1.1.2.13.1.1.3 | DisplayString (SIZE (0..128)) | RO | Line module 1, sensor 1 temperature | |||||||||||||||||
column · DisplayString (SIZE (0..128)) · read-only · current Describes the temperature sensor in a human readable form. This is the same as snAgentTempSensorId, which is numeric and used to traverse the temperature sensor table. The description provides the meaning and purpose of this senor. | |||||||||||||||||||||
| CsnAgentTempValue | 1.3.6.1.4.1.1991.1.1.2.13.1.1.4 | INTEGER (-110..250) | RO | 78 | |||||||||||||||||
| TsnAgentTempThresholdTable | 1.3.6.1.4.1.1991.1.1.2.13.2 | NA | |||||||||||||||||||
table · not-accessible · current Table to list temperature threshold levels for 4 speeds of fan settings. Depending on the temperature level, the fans run at diffrent speeds of RPM. There are 4 levels of temperature settings for 4 fan speeds (low, medium, medium-high, high). This table is applicable to only those modules with temperature sensors. For each row, there are 2 temperature threshold values. The high value, if reached causes the fan to run at next high level speed and when it reduces the below the low value, the fan runs at next low spped. | |||||||||||||||||||||
| RsnAgentTempThresholdEntry | 1.3.6.1.4.1.1991.1.1.2.13.2.1 | NA | |||||||||||||||||||
row · not-accessible · current A row in the module temperature threshold table. | |||||||||||||||||||||
| CsnAgentTempThresholdModule | 1.3.6.1.4.1.1991.1.1.2.13.2.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current The module in the system for which threshold levels represented by this row are applicable.
| |||||||||||||||||||||
| CsnAgentTempThresholdLevel | 1.3.6.1.4.1.1991.1.1.2.13.2.1.2 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current The temperature threshold level of the module for which threshold levels represented by this row are applicable.
| |||||||||||||||||||||
| CsnAgentTempThresholdHighValue | 1.3.6.1.4.1.1991.1.1.2.13.2.1.3 | INTEGER (-110..250) | RW | ||||||||||||||||||
column · INTEGER (-110..250) · read-write · current The high value for the temperature threshold, above which the fans would need to operate at the next higher speed. If it reaches more than the high threshold value for 'high' level, the module will be shutdown. | |||||||||||||||||||||
| CsnAgentTempThresholdLowValue | 1.3.6.1.4.1.1991.1.1.2.13.2.1.4 | INTEGER (-110..250) | RW | ||||||||||||||||||
column · INTEGER (-110..250) · read-write · current The low value for the temperature threshold, below which the fans would need to operate at the next lower speed. This value is not applicable for the 'low' level, as there is no more lower speeds than that. | |||||||||||||||||||||
| TsnAgentTemp2Table | 1.3.6.1.4.1.1991.1.1.2.13.3 | NA | |||||||||||||||||||
table · not-accessible · current Table to list temperatures of the modules in the device for each unit. This table is applicable to only those modules with temperature sensors. | |||||||||||||||||||||
| RsnAgentTemp2Entry | 1.3.6.1.4.1.1991.1.1.2.13.3.1 | NA | |||||||||||||||||||
row · not-accessible · current A row in the module temperature table. | |||||||||||||||||||||
| CsnAgentTemp2UnitNum | 1.3.6.1.4.1.1991.1.1.2.13.3.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current The unit number of module which contains the temperature sensor represented by this row. | |||||||||||||||||||||
| CsnAgentTemp2SlotNum | 1.3.6.1.4.1.1991.1.1.2.13.3.1.2 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current The slot number of module which contains the temperature sensor represented by this row. | |||||||||||||||||||||
| CsnAgentTemp2SensorId | 1.3.6.1.4.1.1991.1.1.2.13.3.1.3 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current The temperature sensor identifier of Slave module whose temperature is represented by this row, for management module: sensor#1 - Intake Side Temperature sensor# 2 - Exhaust Side Temperature. | |||||||||||||||||||||
| CsnAgentTemp2SensorDescr | 1.3.6.1.4.1.1991.1.1.2.13.3.1.4 | DisplayString (SIZE (0..128)) | RO | Sensor 1 Temperature | |||||||||||||||||
column · DisplayString (SIZE (0..128)) · read-only · current Describes the temperature sensor in a human readable form. This is the same as snAgentTempSensorId, which is numeric and used to traverse the temperature sensor table. The description provides the meaning and purpose of this senor. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsnAgentTemp2Value | 1.3.6.1.4.1.1991.1.1.2.13.3.1.5 | INTEGER (-110..250) | RO | 103 | |||||||||||||||||
column · INTEGER (-110..250) · read-only · current Temperature of the sensor represented by this row. Each unit is 0.5 degrees Celsius. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NsnAgentPoe | 1.3.6.1.4.1.1991.1.1.2.14 | ||||||||||||||||||||
| NsnAgentLicense | 1.3.6.1.4.1.1991.1.1.2.15 | ||||||||||||||||||||
| TfdryLicenseTable | 1.3.6.1.4.1.1991.1.1.2.15.1 | NA | |||||||||||||||||||
table · not-accessible · current A list of licenses maintained by license sub-system. | |||||||||||||||||||||
| RfdryLicenseEntry | 1.3.6.1.4.1.1991.1.1.2.15.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in a license table. | |||||||||||||||||||||
| CfdryLicensePackageName | 1.3.6.1.4.1.1991.1.1.2.15.1.1.1 | DisplayString (SIZE (1..24)) | NA | ||||||||||||||||||
column · DisplayString (SIZE (1..24)) · not-accessible · current Name of the package, whose license information, this entry displays. | |||||||||||||||||||||
| CfdryLicenseLid | 1.3.6.1.4.1.1991.1.1.2.15.1.1.2 | DisplayString (SIZE (1..11)) | NA | ||||||||||||||||||
column · DisplayString (SIZE (1..11)) · not-accessible · current License Id (LID) of the license from the package. For the node locked license, this LID is same as LID of the device. For the non-node locked license, this LID is set as 2.0. This entry displays license information. | |||||||||||||||||||||
| CfdryLicenseHash | 1.3.6.1.4.1.1991.1.1.2.15.1.1.3 | DisplayString (SIZE (1..17)) | NA | ||||||||||||||||||
column · DisplayString (SIZE (1..17)) · not-accessible · current A unique hash for identifying a license entry in the system. This helps traverse through the entries with same package name and LID. | |||||||||||||||||||||
| CfdryLicenseType | 1.3.6.1.4.1.1991.1.1.2.15.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type of the license, which can be either normal or trial.
| |||||||||||||||||||||
| CfdryLicensePrecedence | 1.3.6.1.4.1.1991.1.1.2.15.1.1.5 | Unsigned32 (0..65535) | RO | ||||||||||||||||||
column · Unsigned32 (0..65535) · read-only · current Defines the priority of a particular trial license among those having the same package and LID. This is primarily used for determining which license to use, when there are many trial and normal licenses with same package name and LID. | |||||||||||||||||||||
| CfdryLicenseTrialDays | 1.3.6.1.4.1.1991.1.1.2.15.1.1.6 | Unsigned32 (0..65535) | RO | ||||||||||||||||||
column · Unsigned32 (0..65535) · read-only · current The number of trial days for the license, if it's a trial license. Otherwise, the value has no meaning for normal licenses and read as 0 on Get operation. | |||||||||||||||||||||
| CfdryLicenseTrialTimeElapsed | 1.3.6.1.4.1.1991.1.1.2.15.1.1.7 | Unsigned32 (0..65535) | RO | ||||||||||||||||||
column · Unsigned32 (0..65535) · read-only · current The cumulative number of hours used for this trial license. This counts all the usages of the trial license. For a normal license, this is 0. | |||||||||||||||||||||
| CfdryLicenseTrialTimeLeft | 1.3.6.1.4.1.1991.1.1.2.15.1.1.8 | Unsigned32 (0..65535) | RO | ||||||||||||||||||
column · Unsigned32 (0..65535) · read-only · current The number of hours left for the trial license. This is derived from the total number of hours and the cumulative number of hours used. For a normal license, this is 0. | |||||||||||||||||||||
| CfdryLicenseTrialState | 1.3.6.1.4.1.1991.1.1.2.15.1.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This indicates the state of the trial license. Invalid means the license is not valid for this box, unused means the license is never used, avtive means it has been used at least once and expired means it has expired and can't be used any more. Duplicated means the license has same package name with other license and but both serial numbers are different in the same device, this is only for the non-node locked license
| |||||||||||||||||||||
| CfdryLicenseVendorInfo | 1.3.6.1.4.1.1991.1.1.2.15.1.1.10 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current This is the Ruckus Wireless specific package data which is an octet string. This contains encoded information of license specific information such as package bit mask, number of ports, etc. | |||||||||||||||||||||
| CfdryLicenseSlot | 1.3.6.1.4.1.1991.1.1.2.15.1.1.11 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This indicates the slot number of the module, the license belongs to. There is a one to one mapping between LID and slot number, as each module has unique LID and can be present only in one slot. | |||||||||||||||||||||
| CfdryLicenseMode | 1.3.6.1.4.1.1991.1.1.2.15.1.1.12 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The mode of the license, which can be either node locked or non-node locked mode.
| |||||||||||||||||||||
| CfdryLicenseSerialNumber | 1.3.6.1.4.1.1991.1.1.2.15.1.1.13 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current This is the serial number of the license. This is only for the non-node locked license | |||||||||||||||||||||
| CfdryLicenseCapacity | 1.3.6.1.4.1.1991.1.1.2.15.1.1.14 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The capacity of the license. For POD license, this is the number of ports. For premium or advance license, it is 1 | |||||||||||||||||||||
| TbrcdPortLicenseTable | 1.3.6.1.4.1.1991.1.1.2.15.3 | NA | |||||||||||||||||||
table · not-accessible · current A list of ports which require the port license. | |||||||||||||||||||||
| RbrcdPortLicenseEntry | 1.3.6.1.4.1.1991.1.1.2.15.3.1 | NA | |||||||||||||||||||
| CbrcdPortLicenseIndex | 1.3.6.1.4.1.1991.1.1.2.15.3.1.1 | InterfaceIndex | NA | ||||||||||||||||||
column · InterfaceIndex · not-accessible · current The port/interface index (ifindex). | |||||||||||||||||||||
| CbrcdPortLicenseStatus | 1.3.6.1.4.1.1991.1.1.2.15.3.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current license state of the port. validLic(1) ............ the port requires port license, and has valid license noLic(2) ........... the port requires port license, and doesn't have valid license
| |||||||||||||||||||||
| TsnSAULicenseUnitTable | 1.3.6.1.4.1.1991.1.1.2.15.4 | NA | |||||||||||||||||||
table · not-accessible · current A list of SAU licenses maintained by each unit. | |||||||||||||||||||||
| RsnSAULicenseUnitEntry | 1.3.6.1.4.1.1991.1.1.2.15.4.1 | NA | |||||||||||||||||||
| CsnSAULicenseUnitIndex | 1.3.6.1.4.1.1991.1.1.2.15.4.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current The stacking unit Id | |||||||||||||||||||||
| CsnSAULicensePackageName | 1.3.6.1.4.1.1991.1.1.2.15.4.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Name of the license package. | |||||||||||||||||||||
| CsnSAUIsPremLicensePresent | 1.3.6.1.4.1.1991.1.1.2.15.4.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The present state of L3 premium license. none means the license is not applicable to this device
| |||||||||||||||||||||
| CsnSAUIsPoDLicensePresent | 1.3.6.1.4.1.1991.1.1.2.15.4.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The present state of PoD license. none means the license is not applicable to this device
| |||||||||||||||||||||
| CsnSAUPoDLicensedSpeed | 1.3.6.1.4.1.1991.1.1.2.15.4.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The port speed of PoD license. none means the license is not applicable to this device
| |||||||||||||||||||||
| CsnSAUPoDLicensedPorts | 1.3.6.1.4.1.1991.1.1.2.15.4.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The number of licensed ports. The capacity of PoD License. Zero means no PoD license or the license is not applicable to this device | |||||||||||||||||||||
| CsnSAUIsMACSecLicensePresent | 1.3.6.1.4.1.1991.1.1.2.15.4.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The present state of MACSec license. none means the license is not applicable to this device
| |||||||||||||||||||||
| CsnSAUPremSerialNumber | 1.3.6.1.4.1.1991.1.1.2.15.4.1.8 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current This is the serial number of CoE L3 premium license. | |||||||||||||||||||||
| CsnSAUPoDSerialNumber | 1.3.6.1.4.1.1991.1.1.2.15.4.1.9 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current This is the serial number of CoE PoD license. | |||||||||||||||||||||
| CsnSAUMACsecSerialNumber | 1.3.6.1.4.1.1991.1.1.2.15.4.1.10 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current This is the serial number of CoE MACsec license. | |||||||||||||||||||||
| CsnSAUICX7150SerialNumber | 1.3.6.1.4.1.1991.1.1.2.15.4.1.11 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current This is the serial number of CoE ICX7150 license. FOR ICX7150 platform, only one SAU license option can be installed. e.g. 4x10gr, It is combination of l3 premium and PoD license, thus there is only a license serial number at one time | |||||||||||||||||||||
| NsnStackGen | 1.3.6.1.4.1.1991.1.1.5.1 | ||||||||||||||||||||
| SsnStackPriSwitchMode | 1.3.6.1.4.1.1991.1.1.5.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The Stackable Management Primary Switch mode either enabled or disabled and the default is disabled mode. enabled(1)...........primary switch enabled disabled(0)..........primary switch disabled
| |||||||||||||||||||||
| SsnStackMaxSecSwitch | 1.3.6.1.4.1.1991.1.1.5.1.2 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The Maximum Secondary Switches are allowed in the Stackable Management Group. | |||||||||||||||||||||
| SsnStackTotalSecSwitch | 1.3.6.1.4.1.1991.1.1.5.1.3 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The Total Secondary Switches currently connected to the Stackable Management Group. | |||||||||||||||||||||
| SsnStackSyncAllSecSwitch | 1.3.6.1.4.1.1991.1.1.5.1.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Synchronize all the secondary switches in the Stackable Management Group with the following commands. device(2)...........device related parameters. global(3)...........global parameters. local(4)............local parameters. The return result of the above commands are either normal(0)...........normal condition. invalid(1)...........invalid result.
| |||||||||||||||||||||
| SsnStackSmSlotIndex | 1.3.6.1.4.1.1991.1.1.5.1.5 | INTEGER (0..8) | RW | ||||||||||||||||||
scalar · INTEGER (0..8) · read-write · current The Slot 0 is the Master slot and Slot 1-8 are slaves. All the slot-based MIB data can be retrieved with respect to this slot index such as snChassis global MIB. | |||||||||||||||||||||
| SsnStackFmpSetProcess | 1.3.6.1.4.1.1991.1.1.5.1.6 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current normal(0) - The set process is either in an idle state or FMP-SET-SUCCESS state. pending(1) - The pending process is waiting for the result of an FMP-SET. failure(2) - The failure result of an FMP-SET.
| |||||||||||||||||||||
| NsnStackSecSwitchInfo | 1.3.6.1.4.1.1991.1.1.5.2 | ||||||||||||||||||||
| TsnStackSecSwitchTable | 1.3.6.1.4.1.1991.1.1.5.2.1 | NA | |||||||||||||||||||
table · not-accessible · current If snSwGroupOperMode is configured as basic mode which is VLAN by Port, Layer2 switching, then this table is valid. Each VLAN switch port could have a number of VLAN IDs. | |||||||||||||||||||||
| RsnStackSecSwitchEntry | 1.3.6.1.4.1.1991.1.1.5.2.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the Stackable Management Secondary Switch Information table. | |||||||||||||||||||||
| CsnStackSecSwitchIndex | 1.3.6.1.4.1.1991.1.1.5.2.1.1.1 | INTEGER (1..26) | RO | ||||||||||||||||||
column · INTEGER (1..26) · read-only · current The secondary switch index must not be greater than the snStackMaxSecSwitch. | |||||||||||||||||||||
| CsnStackSecSwitchSlotId | 1.3.6.1.4.1.1991.1.1.5.2.1.1.2 | INTEGER (1..26) | RW | ||||||||||||||||||
column · INTEGER (1..26) · read-write · current The secondary switch slot ID must be set before the Configuration command sent from the primary switch to the secondary switch either manually or automatically - snStackSecSwitchCfgCmd. | |||||||||||||||||||||
| CsnStackSecSwitchPortCnts | 1.3.6.1.4.1.1991.1.1.5.2.1.1.3 | INTEGER (1..26) | RO | ||||||||||||||||||
column · INTEGER (1..26) · read-only · current The number of ports in this secondary switch. | |||||||||||||||||||||
| CsnStackSecSwitchEnabled | 1.3.6.1.4.1.1991.1.1.5.2.1.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The secondary switch has been selected to Stackable Management Group.
| |||||||||||||||||||||
| CsnStackSecSwitchAck | 1.3.6.1.4.1.1991.1.1.5.2.1.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The secondary switch has sent reponse to the primary switch.
| |||||||||||||||||||||
| CsnStackSecSwitchMacAddr | 1.3.6.1.4.1.1991.1.1.5.2.1.1.6 | MacAddress | RO | ||||||||||||||||||
column · MacAddress · read-only · current The secondary switch physical address. The physical address represents a MAC Station. | |||||||||||||||||||||
| CsnStackSecSwitchSyncCmd | 1.3.6.1.4.1.1991.1.1.5.2.1.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Synchronize the secondary switches in the Stackable Management Group with the following commands. device(2)...........device related parameters. global(3)...........global parameters. local(4)............local parameters. The return result of the above commands are either normal(0)...........normal condition. invalid(1)...........invalid result.
| |||||||||||||||||||||
| CsnStackSecSwitchIpAddr | 1.3.6.1.4.1.1991.1.1.5.2.1.1.8 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The secondary switch IP Address and is used for manual-command of snStackSecSwitchCfgCmd. | |||||||||||||||||||||
| CsnStackSecSwitchSubnetMask | 1.3.6.1.4.1.1991.1.1.5.2.1.1.9 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The secondary switch IP Subnet Mask and is used for manual-command of snStackSecSwitchCfgCmd. | |||||||||||||||||||||
| CsnStackSecSwitchCfgCmd | 1.3.6.1.4.1.1991.1.1.5.2.1.1.10 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current snStackSecSwitchSlotId must be set before the Configuration command sent from the primary switch to the secondary switch either manually or automatically. auto(2)...........auto-configuration command sent. manual(3).........manual-configuration command sent. if manual-mode is used, snStackSecSwitchIpAddr and snStackSecSwitchSubnetMask must be first set before this command is sent. The return result of the above commands are either normal(0)...........normal condition. invalid(1)..........invalid result.
| |||||||||||||||||||||
| IsnAgent | 1.3.6.1.4.1.1991.4 | ||||||||||||||||||||
identity Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | |||||||||||||||||||||
Textual conventions
DisplayStringOCTET STRINGThis data type is used to model textual information taken from the NVT ASCII character set. By convention, objects with this syntax are declared as having SIZE (0..255)
MacAddressOCTET STRING (SIZE (6))This data type is used to model media addresses. For many types of media, this will be in a binary representation. For example, an ethernet address would be represented as a string of 6 octets.