FA-EXT-MIB
Brocade Communications Systems, Inc.The MIB module is Extension for FA-MIB.
Copyright (c) 1996-2003 Brocade Communications Systems, Inc.
All rights reserved.snmptranslate -m FA-EXT-MIB -Tpsnmpwalk -v2c -c <community> -m FA-EXT-MIB <host> 1.3.6.1.4.1.1588.2.1.1.1.28Imports
| FCMGMT-MIB | connUnitPortEntry |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
| SW-MIB | sw |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IfaExt | 1.3.6.1.4.1.1588.2.1.1.1.28 | ||||||||||||||||||||
identity The MIB module is Extension for FA-MIB.
Copyright (c) 1996-2003 Brocade Communications Systems, Inc.
All rights reserved. | |||||||||||||||||||||
| TswSfpStatTable | 1.3.6.1.4.1.1588.2.1.1.1.28.1 | NA | |||||||||||||||||||
table · not-accessible · current This represents the diagnostic stats of SFPs. | |||||||||||||||||||||
| RswSfpStatEntry | 1.3.6.1.4.1.1588.2.1.1.1.28.1.1 | NA | |||||||||||||||||||
| CswSfpTemperature | 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.1 | OCTET STRING (SIZE (8)) | RO | 43 | |||||||||||||||||
column · OCTET STRING (SIZE (8)) · read-only · current This object identifies the temperature of SFP
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CswSfpVoltage | 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.2 | OCTET STRING (SIZE (8)) | RO | 3298.7 | |||||||||||||||||
column · OCTET STRING (SIZE (8)) · read-only · current This object identifies the voltage of SFP.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CswSfpCurrent | 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.3 | OCTET STRING (SIZE (8)) | RO | 7.570 | |||||||||||||||||
column · OCTET STRING (SIZE (8)) · read-only · current This object identifies the current of SFP.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CswSfpRxPower | 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.4 | OCTET STRING (SIZE (8)) | RO | -25.4 | |||||||||||||||||
column · OCTET STRING (SIZE (8)) · read-only · current This object identifies the Rx power consumption of SFP.
| |||||||||||||||||||||
| CswSfpTxPower | 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.5 | OCTET STRING (SIZE (8)) | RO | -26.2 | |||||||||||||||||
column · OCTET STRING (SIZE (8)) · read-only · current This object identifies the Tx power consumption of SFP.
| |||||||||||||||||||||
| CswSfpPoweronHrs | 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.6 | Integer32 | RO | 31123 | |||||||||||||||||
column · Integer32 · read-only · current This object identifies the power on hours of SFP. This is applicable only to 16G SFPs.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CswSfpUnitId | 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This object identifies unit ID of SFP. This is applicable only to QSFP. | |||||||||||||||||||||
| NswFapwwnFeature | 1.3.6.1.4.1.1588.2.1.1.1.28.2 | ||||||||||||||||||||
node · current The OID sub-tree for Fapwwn feature. Using this feature user can configure virtual port WWN for a port. | |||||||||||||||||||||
| TswPortFapwwnConfigTable | 1.3.6.1.4.1.1588.2.1.1.1.28.2.1 | NA | |||||||||||||||||||
table · not-accessible · current This represents the configuration of ports. | |||||||||||||||||||||
| RswPortFapwwnConfigEntry | 1.3.6.1.4.1.1588.2.1.1.1.28.2.1.1 | NA | |||||||||||||||||||
| CswPortFapwwnConfigEnable | 1.3.6.1.4.1.1588.2.1.1.1.28.2.1.1.1 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Represents the Fapwwn status. This is for per port. | |||||||||||||||||||||
| CswPortFapwwnConfigFapwwn | 1.3.6.1.4.1.1588.2.1.1.1.28.2.1.1.2 | DisplayString (SIZE (256)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (256)) · read-only · current Represents the Fapwwn. For AG it is range of WWNs. If Fapwwn feature is not enabled in a port this object value is NA(Not Applicable. | |||||||||||||||||||||
| CswPortFapwwnConfigType | 1.3.6.1.4.1.1588.2.1.1.1.28.2.1.1.3 | FapwwnType | RO | ||||||||||||||||||
column · FapwwnType · read-only · current Represents the Fapwwn type. | |||||||||||||||||||||
| TswPortConfigTable | 1.3.6.1.4.1.1588.2.1.1.1.28.3 | NA | |||||||||||||||||||
table · not-accessible · current This represents the configuration of encryption / compression feature on a port | |||||||||||||||||||||
| RswPortConfigEntry | 1.3.6.1.4.1.1588.2.1.1.1.28.3.1 | NA | |||||||||||||||||||
row · not-accessible · current This represents the configuration of encryption / compression feature on a port
| |||||||||||||||||||||
| CswPortEncrypt | 1.3.6.1.4.1.1588.2.1.1.1.28.3.1.1 | EncryptCompressStatus | RO | ||||||||||||||||||
column · EncryptCompressStatus · read-only · current Represents the encryption status on a port. | |||||||||||||||||||||
| CswPortCompression | 1.3.6.1.4.1.1588.2.1.1.1.28.3.1.2 | EncryptCompressStatus | RO | ||||||||||||||||||
column · EncryptCompressStatus · read-only · current Represents the compression status on port. | |||||||||||||||||||||
| CswPortCipherKeySize | 1.3.6.1.4.1.1588.2.1.1.1.28.3.1.3 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current Represents the Cipher key size. FOS supports 256 bytes key | |||||||||||||||||||||
| CswPortCipherMode | 1.3.6.1.4.1.1588.2.1.1.1.28.3.1.4 | CiperMode | RO | ||||||||||||||||||
column · CiperMode · read-only · current Represents the Cipher mode. | |||||||||||||||||||||
| TswConnUnitPortTable | 1.3.6.1.4.1.1588.2.1.1.1.28.4 | NA | |||||||||||||||||||
table · not-accessible · current This represents the Conn unit Port entry | |||||||||||||||||||||
| RswConnUnitPortEntry | 1.3.6.1.4.1.1588.2.1.1.1.28.4.1 | NA | |||||||||||||||||||
| CswConnUnitPortCapableSpeeds | 1.3.6.1.4.1.1588.2.1.1.1.28.4.1.1 | OCTET STRING | RO | 8,16,32_Gbps | |||||||||||||||||
column · OCTET STRING · read-only · current This represents the available speeds, that a port is capable of configuring Example values from LibreNMS test devices
| |||||||||||||||||||||
| CswConnUnitPortSpeedMode | 1.3.6.1.4.1.1588.2.1.1.1.28.4.1.2 | INTEGER | RO | auto-neg(1) | |||||||||||||||||
column · INTEGER · read-only · current This represents the type of speed modes that can be configured for the particular port. The modes that can be configured are auto-negotiable and static speeds.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CswConnUnitPortFECMode | 1.3.6.1.4.1.1588.2.1.1.1.28.4.1.3 | INTEGER | RO | enabled(3) | |||||||||||||||||
column · INTEGER · read-only · current This represents the port Forward Error Correction Mode. FEC feature is only applicable to 10G/16G platforms.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CswConnUnitPortFECState | 1.3.6.1.4.1.1588.2.1.1.1.28.4.1.4 | INTEGER | RO | inactive(2) | |||||||||||||||||
column · INTEGER · read-only · current This represents FEC state of a port.If in link both sfp connected are of brocade vendor type then state is active, else it will be inactive.
Example values from LibreNMS test devices
| |||||||||||||||||||||
Textual conventions
CiperModeINTEGERallFrames(2)fcpAndNonFCP(3)none(1)onlyFCP(4)Represents cipher mode.
EncryptCompressStatusINTEGERdisabled(2)enabled(1)unknown(3)Represents status of feature encryption or compression.