BroadworksMaintenance
BroadSoft, Inc.This is the System Management Information structure for the Broadsoft enterprise.
snmptranslate -m BroadworksMaintenance -Tpsnmpwalk -v2c -c <community> -m BroadworksMaintenance <host> 1.3.6.1.4.1.6431Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ibroadsoft | 1.3.6.1.4.1.6431 | ||||||||||||
identity This is the System Management Information structure for the Broadsoft enterprise. | |||||||||||||
| Nbroadworks | 1.3.6.1.4.1.6431.1 | ||||||||||||
| Ncommon | 1.3.6.1.4.1.6431.1.1 | ||||||||||||
| NmanagedObjects | 1.3.6.1.4.1.6431.1.1.2 | ||||||||||||
| NmoServerModule | 1.3.6.1.4.1.6431.1.1.2.1 | ||||||||||||
| SbwServerType | 1.3.6.1.4.1.6431.1.1.2.1.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Gives the broadworks server type: { Application Server | Network Server | Media Server | Relay Server } | |||||||||||||
| SbwRedundancyType | 1.3.6.1.4.1.6431.1.1.2.1.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Gives the broadworks server redundancy type: { Primary | Secondary | NotRedundant }
| |||||||||||||
| SbwActiveSoftwareVersion | 1.3.6.1.4.1.6431.1.1.2.1.3 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Gives the version of the active software version. An operator can change the active software version by setting this field. | |||||||||||||
| SbwAdminState | 1.3.6.1.4.1.6431.1.1.2.1.4 | INTEGER | RW | unlock(2) | |||||||||
scalar · INTEGER · read-write · current Server admin state. 0- Lock, 1- Locking, 2- Unlock, 3- ShuttingDown, 4- Stopped, 5- Forced Lock
Example values from LibreNMS test devices
| |||||||||||||
| SbwOperationalState | 1.3.6.1.4.1.6431.1.1.2.1.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Server operational state. 0- Enabled, 1- Disabled
| |||||||||||||
| SbwResetServer | 1.3.6.1.4.1.6431.1.1.2.1.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Remotely reset the BroadWorks server. The reset action kicks in when the counter is set to 1.
| |||||||||||||
| TbwSubComponentTable | 1.3.6.1.4.1.6431.1.1.2.1.7 | NA | |||||||||||
table · not-accessible · current This table exposes some key BroadWorks server sub components. It may or may not be empty depending on the server | |||||||||||||
| RbwSubComponentEntry | 1.3.6.1.4.1.6431.1.1.2.1.7.1 | NA | |||||||||||
row · not-accessible · current This row contains information about a software component in the system
| |||||||||||||
| CbwSubComponentIndex | 1.3.6.1.4.1.6431.1.1.2.1.7.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This integer represents the a software component index in the system | |||||||||||||
| CbwSubComponentName | 1.3.6.1.4.1.6431.1.1.2.1.7.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The name of an exposed subcomponent | |||||||||||||
| CbwSubComponentInfo | 1.3.6.1.4.1.6431.1.1.2.1.7.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Displays status information about the component | |||||||||||||
| SbwTargetSoftwareVersion | 1.3.6.1.4.1.6431.1.1.2.1.8 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Gives the target software version. If the server is reset, the active server software version will be updated. | |||||||||||||
| SbwRevertBackupLocation | 1.3.6.1.4.1.6431.1.1.2.1.9 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Gives the location of the backup file to use if using the revert option of the reset command. | |||||||||||||
| NmoSoftwareVersionModule | 1.3.6.1.4.1.6431.1.1.2.2 | ||||||||||||
| SbwUpdateSoftwareVersionTable | 1.3.6.1.4.1.6431.1.1.2.2.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This counter is used to reload the installed software table. To do so, just set this register to 1 (reload)
| |||||||||||||
| TbwSoftwareVersionTable | 1.3.6.1.4.1.6431.1.1.2.2.2 | NA | |||||||||||
table · not-accessible · current This table has an entry per software version installed on the server | |||||||||||||
| RbwSoftwareVersionEntry | 1.3.6.1.4.1.6431.1.1.2.2.2.1 | NA | |||||||||||
row · not-accessible · current This row contains information on a particular braodworks software version installed on the server | |||||||||||||
| CbwSoftwareVersionIndex | 1.3.6.1.4.1.6431.1.1.2.2.2.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This integer represents the a group index in the system | |||||||||||||
| CbwSoftwareVersionName | 1.3.6.1.4.1.6431.1.1.2.2.2.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The name of a software load installed on the server. | |||||||||||||
| CbwSoftwareVersionInstallDate | 1.3.6.1.4.1.6431.1.1.2.2.2.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Installation date for this software version. | |||||||||||||
| CbwSoftwareVersionStatus | 1.3.6.1.4.1.6431.1.1.2.2.2.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of a software version.
| |||||||||||||
| TbwSoftwarePatchTable | 1.3.6.1.4.1.6431.1.1.2.2.3 | NA | |||||||||||
table · not-accessible · current This table has an entry per service packs installed for each sofware versions | |||||||||||||
| RbwSoftwarePatchEntry | 1.3.6.1.4.1.6431.1.1.2.2.3.1 | NA | |||||||||||
row · not-accessible · current This row contains information on a particular braodworks patch installed on the server
| |||||||||||||
| CbwSoftwarePatchIndex | 1.3.6.1.4.1.6431.1.1.2.2.3.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This integer an index of a patch installed in the system | |||||||||||||
| SbwSoftwarePatchVersionName | 1.3.6.1.4.1.6431.1.1.2.2.3.1.2 | DisplayString | RO | obsolete | |||||||||
scalar · DisplayString · read-only · obsolete The name of a software load for which this patch applies. This field was obsoleted in BroadWorks release 14.0. | |||||||||||||
| CbwSoftwarePatchName | 1.3.6.1.4.1.6431.1.1.2.2.3.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Patch name. | |||||||||||||
| SbwSoftwarePatchType | 1.3.6.1.4.1.6431.1.1.2.2.3.1.4 | DisplayString | RO | obsolete | |||||||||
scalar · DisplayString · read-only · obsolete Patch type. This field was obsoleted in BroadWorks release 14.0. | |||||||||||||
| CbwSoftwarePatchInstallDate | 1.3.6.1.4.1.6431.1.1.2.2.3.1.5 | DisplayString | RO | obsolete | |||||||||
column · DisplayString · read-only · obsolete This field was obsoleted in BroadWorks release 14.0. | |||||||||||||
| CbwSoftwarePatchState | 1.3.6.1.4.1.6431.1.1.2.2.3.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The state of the patch.
| |||||||||||||
| SbwSoftwarePatchOperation | 1.3.6.1.4.1.6431.1.1.2.2.3.1.7 | INTEGER | RW | obsolete | |||||||||
scalar · INTEGER · read-write · obsolete This field was obsoleted in BroadWorks release 14.0.
| |||||||||||||
| CbwSoftwarePatchBundle | 1.3.6.1.4.1.6431.1.1.2.2.3.1.8 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Patch Bundle name of the patch. | |||||||||||||
| TbwSoftwareThirdPartyTable | 1.3.6.1.4.1.6431.1.1.2.2.4 | NA | |||||||||||
table · not-accessible · current This table has an entry for third party software version used by the BroadWorks server | |||||||||||||
| RbwSoftwareThirdPartyEntry | 1.3.6.1.4.1.6431.1.1.2.2.4.1 | NA | |||||||||||
row · not-accessible · current This row contains information on an installed 3rd party software version | |||||||||||||
| CbwSoftwareThirdPartyIndex | 1.3.6.1.4.1.6431.1.1.2.2.4.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This integer represents the a group index in the system | |||||||||||||
| CbwSoftwareThirdPartyName | 1.3.6.1.4.1.6431.1.1.2.2.4.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The name of a software load for which this service pack applies | |||||||||||||
| CbwSoftwareThirdPartyVersion | 1.3.6.1.4.1.6431.1.1.2.2.4.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current A 3rd party software version id | |||||||||||||
| CbwSoftwareThirdPartyStatus | 1.3.6.1.4.1.6431.1.1.2.2.4.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of a 3rd party software version.
| |||||||||||||
| TbwSoftwarePatchHistoryTable | 1.3.6.1.4.1.6431.1.1.2.2.5 | NA | |||||||||||
table · not-accessible · current This table contains information about all operation performed on patches. | |||||||||||||
| RbwSoftwarePatchHistoryEntry | 1.3.6.1.4.1.6431.1.1.2.2.5.1 | NA | |||||||||||
row · not-accessible · current Entry of the patch history table containing history of operations applied to patches.
| |||||||||||||
| CbwSoftwarePatchHistoryIndex | 1.3.6.1.4.1.6431.1.1.2.2.5.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This integer an index of a patch operation history. | |||||||||||||
| CbwSoftwarePatchHistPatchName | 1.3.6.1.4.1.6431.1.1.2.2.5.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The name of the patch against which the operation was applied. | |||||||||||||
| CbwSoftwarePatchHistTimeStamp | 1.3.6.1.4.1.6431.1.1.2.2.5.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The time stamp of the patch operation. | |||||||||||||
| CbwSoftwarePatchHistNewState | 1.3.6.1.4.1.6431.1.1.2.2.5.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The new state of the patch.
| |||||||||||||
| TbwSoftwarePatchImpactedFileTable | 1.3.6.1.4.1.6431.1.1.2.2.6 | NA | |||||||||||
table · not-accessible · current This table contains information about files modified by the patches applied on the system. | |||||||||||||
| RbwSoftwarePatchImpactedFileEntry | 1.3.6.1.4.1.6431.1.1.2.2.6.1 | NA | |||||||||||
row · not-accessible · current Entry of the patch impacted file table containing information about files modified by patches.
| |||||||||||||
| CbwSoftwarePatchImpactedFileIndex | 1.3.6.1.4.1.6431.1.1.2.2.6.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This integer an index of an impacted file/patch name. | |||||||||||||
| CbwSoftwarePatchImpactedFilePatchName | 1.3.6.1.4.1.6431.1.1.2.2.6.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The name of the patch. | |||||||||||||
| CbwSoftwarePatchImpactedFileFileName | 1.3.6.1.4.1.6431.1.1.2.2.6.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The name of an impacted file. | |||||||||||||
| NmoDeviceModule | 1.3.6.1.4.1.6431.1.1.2.3 | ||||||||||||
| TbwManagedObjectsTable | 1.3.6.1.4.1.6431.1.1.2.3.1 | NA | |||||||||||
table · not-accessible · current Table of all sub-managed objects under BroadWorks control | |||||||||||||
| RbwManagedObjectsEntry | 1.3.6.1.4.1.6431.1.1.2.3.1.1 | NA | |||||||||||
row · not-accessible · current This row contains information on a particular sub-managed object | |||||||||||||
| CbwManagedObjectsIndex | 1.3.6.1.4.1.6431.1.1.2.3.1.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This integer represents the a managed object index in the system | |||||||||||||
| CbwManagedObjectsName | 1.3.6.1.4.1.6431.1.1.2.3.1.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The name of a managed object controlled by BroadWorks | |||||||||||||
| CbwManagedObjectsProtocol | 1.3.6.1.4.1.6431.1.1.2.3.1.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The protocol supported by a managed object controlled by BroadWorks | |||||||||||||
| CbwManagedObjectsType | 1.3.6.1.4.1.6431.1.1.2.3.1.1.4 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The type of a managed object controlled by BroadWorks | |||||||||||||
| CbwManagedObjectsAdminState | 1.3.6.1.4.1.6431.1.1.2.3.1.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The administrative state of a managed object controlled by BroadWorks. 0- Lock, 1- locking, 2- Unlock
| |||||||||||||
| CbwManagedObjectsOperationalState | 1.3.6.1.4.1.6431.1.1.2.3.1.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The operational state of a managed object controlled by BroadWorks. 0- Enabled, 1- Disabled
| |||||||||||||
| Nthresholds | 1.3.6.1.4.1.6431.1.1.3 | ||||||||||||
| NthCounterModule | 1.3.6.1.4.1.6431.1.1.3.1 | ||||||||||||
| TbwCounterThresholdTable | 1.3.6.1.4.1.6431.1.1.3.1.1 | NA | |||||||||||
table · not-accessible · current Table of all the thresholds set against counters in the system | |||||||||||||
| RbwCounterThresholdEntry | 1.3.6.1.4.1.6431.1.1.3.1.1.1 | NA | |||||||||||
row · not-accessible · current This row contains information on a particular counter threshold | |||||||||||||
| CbwCounterThresholdIndex | 1.3.6.1.4.1.6431.1.1.3.1.1.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This integer represents the index of a counter threshold in the system | |||||||||||||
| CbwCounterThresholdDescription | 1.3.6.1.4.1.6431.1.1.3.1.1.1.2 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current A description for this threshold. | |||||||||||||
| CbwCounterThresholdName | 1.3.6.1.4.1.6431.1.1.3.1.1.1.3 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current The name of a counter. | |||||||||||||
| CbwCounterThresholdInitialValue | 1.3.6.1.4.1.6431.1.1.3.1.1.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The initial counter threshold value | |||||||||||||
| CbwCounterThresholdOffsetValue | 1.3.6.1.4.1.6431.1.1.3.1.1.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The offset to be added to the current threshold value once an alarm has been sent | |||||||||||||
| CbwCounterThresholdCurrentValue | 1.3.6.1.4.1.6431.1.1.3.1.1.1.6 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The threshold value at which the next alarm will be generated | |||||||||||||
| CbwCounterThresholdSeverity | 1.3.6.1.4.1.6431.1.1.3.1.1.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The severity of the alarm to be sent
| |||||||||||||
| CbwCounterThresholdControl | 1.3.6.1.4.1.6431.1.1.3.1.1.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This scalar controls the life cycle of the threshold. Setting this counter to create(3) using an unused index creates a row with the specified index. Setting it with an already used index has no effect. Setting this counter to delete(2) removes the entry.
| |||||||||||||
| NthGaugeModule | 1.3.6.1.4.1.6431.1.1.3.2 | ||||||||||||
| TbwGaugeThresholdTable | 1.3.6.1.4.1.6431.1.1.3.2.1 | NA | |||||||||||
table · not-accessible · current Table of all the thresholds set against gauges in the system | |||||||||||||
| RbwGaugeThresholdEntry | 1.3.6.1.4.1.6431.1.1.3.2.1.1 | NA | |||||||||||
row · not-accessible · current This row contains information on a particular gauge threshold | |||||||||||||
| CbwGaugeThresholdIndex | 1.3.6.1.4.1.6431.1.1.3.2.1.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This integer represents the index of a gauge threshold in the system | |||||||||||||
| CbwGaugeThresholdDescription | 1.3.6.1.4.1.6431.1.1.3.2.1.1.2 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current A description for this threshold. | |||||||||||||
| CbwGaugeThresholdName | 1.3.6.1.4.1.6431.1.1.3.2.1.1.3 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current The name of a gauge. | |||||||||||||
| CbwGaugeThresholdNotifyLow | 1.3.6.1.4.1.6431.1.1.3.2.1.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The gauge value at which an alarm will be generated when the gauge value reaches or crosses the NotifyHigh level in a rising direction. Subsequent similar crossings of the NotifyHigh level will not generate an alarm until the gauge has reached or crossed the corresponding NotifyLow level. | |||||||||||||
| CbwGaugeThresholdNotifyHigh | 1.3.6.1.4.1.6431.1.1.3.2.1.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The gauge value at which an alarm will be generated when the gauge value reaches or crosses the NotifyLow level in a falling direction. Subsequent similar crossings of the NotifyLow level will not generate an alarm until the gauge has reached or crossed the corresponding NotifyHigh level. | |||||||||||||
| CbwGaugeThresholdSeverity | 1.3.6.1.4.1.6431.1.1.3.2.1.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The severity of the alarm to be sent
| |||||||||||||
| CbwGaugeThresholdControl | 1.3.6.1.4.1.6431.1.1.3.2.1.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This scalar controls the life cycle of the threshold. Setting this gauge to delete(2) removes the entry.
| |||||||||||||
| NthAlarmModule | 1.3.6.1.4.1.6431.1.1.3.3 | ||||||||||||
| TbwAlarmThresholdTable | 1.3.6.1.4.1.6431.1.1.3.3.1 | NA | |||||||||||
table · not-accessible · current Table of all the thresholds set against alarms in the system | |||||||||||||
| RbwAlarmThresholdEntry | 1.3.6.1.4.1.6431.1.1.3.3.1.1 | NA | |||||||||||
row · not-accessible · current This row contains information on a particular alarm threshold | |||||||||||||
| CbwAlarmThresholdIndex | 1.3.6.1.4.1.6431.1.1.3.3.1.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This integer represents the index of an alarm threshold in the system | |||||||||||||
| CbwAlarmThresholdName | 1.3.6.1.4.1.6431.1.1.3.3.1.1.2 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current The name of an alarm or DEFAULT if the threshold applies to all alarms in the system | |||||||||||||
| CbwAlarmThresholdMaxNumTrapsPerTimePeriod | 1.3.6.1.4.1.6431.1.1.3.3.1.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The maximum number of traps that the system outputs per sliding time period. If set to 0 (zero), the alarm is suppressed and the system does not output any trap for this alarm filter. | |||||||||||||
| CbwAlarmThresholdTimePeriodInSeconds | 1.3.6.1.4.1.6431.1.1.3.3.1.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The time period used for threshold calculation, in seconds. | |||||||||||||
| CbwAlarmThresholdProblemTextVarNum1 | 1.3.6.1.4.1.6431.1.1.3.3.1.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current To further refine a threshold, specify the position number of the variable data within the alarm problem text (1, 2, 3, etc.) that together with the alarm name, define the actual threshold. For example, if the alarm has five problem text variables: 1-deviceName, 2-deviceAddress, 3-devicePort, 4-errorType, 5-errorCode, and if the alarm threshold is to limit the number of traps for a given deviceName, devicePort, and errorType, then bwAlarmThresholdProblemTextVarNum1 should be set to 1, bwAlarmThresholdProblemTextVarNum2 should be set to 3, and bwAlarmThresholdProblemTextVarNum3 should be set to 4. To ignore filtering based on problem text variables, set to 0 (zero). | |||||||||||||
| CbwAlarmThresholdProblemTextVarNum2 | 1.3.6.1.4.1.6431.1.1.3.3.1.1.6 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current To further refine a threshold, specify the position number of the variable data within the alarm problem text (1, 2, 3, etc.) that together with the alarm name, define the actual threshold. For example, if the alarm has five problem text variables: 1-deviceName, 2-deviceAddress, 3-devicePort, 4-errorType, 5-errorCode, and if the alarm threshold is to limit the number of traps for a given deviceName, devicePort, and errorType, then bwAlarmThresholdProblemTextVarNum1 should be set to 1, bwAlarmThresholdProblemTextVarNum2 should be set to 3, and bwAlarmThresholdProblemTextVarNum3 should be set to 4. To ignore filtering based on problem text variables, set to 0 (zero). | |||||||||||||
| CbwAlarmThresholdProblemTextVarNum3 | 1.3.6.1.4.1.6431.1.1.3.3.1.1.7 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current To further refine a threshold, specify the position number of the variable data within the alarm problem text (1, 2, 3, etc.) that together with the alarm name, define the actual threshold. For example, if the alarm has five problem text variables: 1-deviceName, 2-deviceAddress, 3-devicePort, 4-errorType, 5-errorCode, and if the alarm threshold is to limit the number of traps for a given deviceName, devicePort, and errorType, then bwAlarmThresholdProblemTextVarNum1 should be set to 1, bwAlarmThresholdProblemTextVarNum2 should be set to 3, and bwAlarmThresholdProblemTextVarNum3 should be set to 4. To ignore filtering based on problem text variables, set to 0 (zero). | |||||||||||||
| CbwAlarmThresholdProblemTextVarNum4 | 1.3.6.1.4.1.6431.1.1.3.3.1.1.8 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current To further refine a threshold, specify the position number of the variable data within the alarm problem text (1, 2, 3, etc.) that together with the alarm name, define the actual threshold. For example, if the alarm has five problem text variables: 1-deviceName, 2-deviceAddress, 3-devicePort, 4-errorType, 5-errorCode, and if the alarm threshold is to limit the number of traps for a given deviceName, devicePort, and errorType, then bwAlarmThresholdProblemTextVarNum1 should be set to 1, bwAlarmThresholdProblemTextVarNum2 should be set to 3, and bwAlarmThresholdProblemTextVarNum3 should be set to 4. To ignore filtering based on problem text variables, set to 0 (zero). | |||||||||||||
| CbwAlarmThresholdProblemTextVarNum5 | 1.3.6.1.4.1.6431.1.1.3.3.1.1.9 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current To further refine a threshold, specify the position number of the variable data within the alarm problem text (1, 2, 3, etc.) that together with the alarm name, define the actual threshold. For example, if the alarm has five problem text variables: 1-deviceName, 2-deviceAddress, 3-devicePort, 4-errorType, 5-errorCode, and if the alarm threshold is to limit the number of traps for a given deviceName, devicePort, and errorType, then bwAlarmThresholdProblemTextVarNum1 should be set to 1, bwAlarmThresholdProblemTextVarNum2 should be set to 3, and bwAlarmThresholdProblemTextVarNum3 should be set to 4. To ignore filtering based on problem text variables, set to 0 (zero). | |||||||||||||
| CbwAlarmThresholdMinimumSeverity | 1.3.6.1.4.1.6431.1.1.3.3.1.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This is the minimum alarm severity under which alarms start to be discarded.
| |||||||||||||
| CbwAlarmThresholdControl | 1.3.6.1.4.1.6431.1.1.3.3.1.1.11 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This scalar controls the life cycle of the threshold. Setting this threshold to create(3) using an unused index creates a row with the specified index. Setting it with an already used index has no effect. Setting this threshold to delete(2) removes the entry.
| |||||||||||||
| NreservedModule | 1.3.6.1.4.1.6431.1.1.10 | ||||||||||||
| SbwReservedScalar | 1.3.6.1.4.1.6431.1.1.10.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This is a reserved counter
| |||||||||||||
| NbwMtcMibConformance | 1.3.6.1.4.1.6431.1.1.20 | ||||||||||||
| NbwMtcMibGroups | 1.3.6.1.4.1.6431.1.1.20.1 | ||||||||||||
| GbwMoServerGroup | 1.3.6.1.4.1.6431.1.1.20.1.1 | ||||||||||||
group · current This group defines managed object server attributes. | |||||||||||||
| GbwMoSoftwareVersionsGroup | 1.3.6.1.4.1.6431.1.1.20.1.2 | ||||||||||||
group · current This group defines the software version attributes for the managed object.
| |||||||||||||
| GbwMoDeviceGroup | 1.3.6.1.4.1.6431.1.1.20.1.3 | ||||||||||||
group · current This group defines the counters used to manage the access or network devices monitored by this managed object. | |||||||||||||
| GbwMoThresholdsGroup | 1.3.6.1.4.1.6431.1.1.20.1.4 | ||||||||||||
group · current This group defines the threshold control for this managed object.
| |||||||||||||
| GbwMoReserveGroup | 1.3.6.1.4.1.6431.1.1.20.1.10 | ||||||||||||
| NbwMtcMibCompliancy | 1.3.6.1.4.1.6431.1.1.20.2 | ||||||||||||
| MbwMoBasicCompliance | 1.3.6.1.4.1.6431.1.1.20.2.1 | ||||||||||||
compliance · current BroadWorks Common managed object MIB compliance | |||||||||||||