BSS-RCP-MIB
Bosch Sicherheitssysteme Engineering GmbHsnmptranslate -m BSS-RCP-MIB -Tpsnmpwalk -v2c -c <community> -m BSS-RCP-MIB <host> 1.3.6.1.4.1.3967Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-MIB | sysUpTime |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nbss | 1.3.6.1.4.1.3967 | ||||||||||||||||||||
| Nrcp | 1.3.6.1.4.1.3967.1 | ||||||||||||||||||||
| Nsys | 1.3.6.1.4.1.3967.1.1 | ||||||||||||||||||||
| Nidentification | 1.3.6.1.4.1.3967.1.1.1 | ||||||||||||||||||||
| Sunit-name | 1.3.6.1.4.1.3967.1.1.1.1 | DisplayString | RW | optional | 31:31:34:20:53:43:52:55:42:42:45:52:53:00 | ||||||||||||||||
scalar · DisplayString · read-write · optional WRITE: set unit name (max 31 unicode character + null delimiter) READ: read the unit name Example values from LibreNMS test devices
| |||||||||||||||||||||
| Sunit-id | 1.3.6.1.4.1.3967.1.1.1.2 | DisplayString | RW | optional | |||||||||||||||||
scalar · DisplayString · read-write · optional WRITE: set unit ID (max 31 unicode character + null delimiter) READ: read the unit ID | |||||||||||||||||||||
| TcamnameTable | 1.3.6.1.4.1.3967.1.1.1.3 | NA | mandatory | ||||||||||||||||||
| RcamnameEntry | 1.3.6.1.4.1.3967.1.1.1.3.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory
| |||||||||||||||||||||
| Ccamname | 1.3.6.1.4.1.3967.1.1.1.3.1.1 | DisplayString | RW | optional | |||||||||||||||||
column · DisplayString · read-write · optional WRITE: Deprecated! Use CONF_CAMNAME_LINES instead. (max 32 unicode character + null delimiter). Note: if more than 32 unicode characters are sent (up to max 64 + null delimiter) then the characters 33-64 are written to the second camera name line. CONF_CAMNAME2 will then return an empty string when reading and an error when writing. READ: Deprecated! Use CONF_CAMNAME_LINES instead. | |||||||||||||||||||||
| Shardware-version | 1.3.6.1.4.1.3967.1.1.1.4 | DisplayString | RO | optional | 46:30:30:30:39:31:34:33:00 | ||||||||||||||||
scalar · DisplayString · read-only · optional READ: read the hardware version Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ssoftware-version | 1.3.6.1.4.1.3967.1.1.1.5 | DisplayString | RO | optional | 32:34:35:30:30:37:39:33:00 | ||||||||||||||||
scalar · DisplayString · read-only · optional READ: read the software version Example values from LibreNMS test devices
| |||||||||||||||||||||
| Sserial-number | 1.3.6.1.4.1.3967.1.1.1.6 | OCTET STRING | RO | optional | 00:04:04:04:04:09:02:05:07:03:02:08:03:00:00:00… | ||||||||||||||||
scalar · OCTET STRING · read-only · optional READ: returns the serial number of the device. The representation of this serial number is binary octets Example values from LibreNMS test devices
| |||||||||||||||||||||
| Smanufacturer-name | 1.3.6.1.4.1.3967.1.1.1.7 | DisplayString | RO | optional | 42:6f:73:63:68:00 | ||||||||||||||||
scalar · DisplayString · read-only · optional READ: returns the manufacturer name Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ntime | 1.3.6.1.4.1.3967.1.1.2 | ||||||||||||||||||||
| Stimezone | 1.3.6.1.4.1.3967.1.1.2.1 | INTEGER | RO | optional | |||||||||||||||||
scalar · INTEGER · read-only · optional READ: the timezone in which the unit has to operate (GMT +- nbr of seconds +- nbr of seconds DLS) | |||||||||||||||||||||
| Sntp-server-ip-str | 1.3.6.1.4.1.3967.1.1.2.2 | DisplayString | RW | optional | |||||||||||||||||
scalar · DisplayString · read-write · optional WRITE: sets the ntp server ip (as string; xxx.xxx.xxx.xxx or URL) to sync time from READ: reads the time servers ip address (xxx.xxx.xxx.xxx, or URL) used to sync time from | |||||||||||||||||||||
| Stime-sc-connect-fail-msg | 1.3.6.1.4.1.3967.1.1.2.3 | INTEGER | RO | optional | |||||||||||||||||
scalar · INTEGER · read-only · optional READ: neither read nor write access, only message, 1 = connect to server for time sync failed | |||||||||||||||||||||
| Nconnection | 1.3.6.1.4.1.3967.1.1.3 | ||||||||||||||||||||
| Sconnect-to | 1.3.6.1.4.1.3967.1.1.3.1 | OCTET STRING | RO | optional | |||||||||||||||||
scalar · OCTET STRING · read-only · optional READ: See RCP docu for command CONF_CONNECT_TO | |||||||||||||||||||||
| Sdisconnect-primitive | 1.3.6.1.4.1.3967.1.1.3.2 | OCTET STRING | RO | optional | |||||||||||||||||
scalar · OCTET STRING · read-only · optional READ: NOT_SUPPORTED | |||||||||||||||||||||
| Nviproc | 1.3.6.1.4.1.3967.1.1.4 | ||||||||||||||||||||
| TviprocTable | 1.3.6.1.4.1.3967.1.1.4.1 | NA | mandatory | ||||||||||||||||||
| RviprocEntry | 1.3.6.1.4.1.3967.1.1.4.1.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory
| |||||||||||||||||||||
| Cviproc-id | 1.3.6.1.4.1.3967.1.1.4.1.1.1 | INTEGER | RO | optional | |||||||||||||||||
column · INTEGER · read-only · optional READ: get the viproc interface id (0:= no viproc), nb: message is sent in host byte order | |||||||||||||||||||||
| Cviproc-mode | 1.3.6.1.4.1.3967.1.1.4.1.1.2 | INTEGER | RO | optional | |||||||||||||||||
column · INTEGER · read-only · optional READ: switches between silent vca(0)/manual(1..16)/off(0xfd)/scheduler(0xfe)/script mode(0xff) of the video content analysis (VCA). In case of a moving dome and a preset with activated VCA profile the active Id is returned. (if vca is turned off then 0xfd is returned). | |||||||||||||||||||||
| Naux | 1.3.6.1.4.1.3967.1.1.5 | ||||||||||||||||||||
| Soem-device-name | 1.3.6.1.4.1.3967.1.1.5.1 | DisplayString | RO | optional | 44:49:4e:49:4f:4e:20:49:50:20:73:74:61:72:6c:69… | ||||||||||||||||
scalar · DisplayString · read-only · optional READ: get the oem device name Example values from LibreNMS test devices
| |||||||||||||||||||||
| Soem-ext-id | 1.3.6.1.4.1.3967.1.1.5.2 | INTEGER | RO | optional | |||||||||||||||||
scalar · INTEGER · read-only · optional READ: DEPRECATED: please use CONF_DEVICE_TYPE_IDS instead. Get the oem extension id | |||||||||||||||||||||
| Sdefaults | 1.3.6.1.4.1.3967.1.1.5.3 | INTEGER | WO | optional | |||||||||||||||||
scalar · INTEGER · write-only · optional WRITE: sets config to default values except IP, subnet and gateway and resets the device. ATTENTION: Wait till board has fully rebooted before switching of power, to ensure that defaults are applied completly. Also propagade this to the user, that he has to wait until the reboot is complete. | |||||||||||||||||||||
| Sfactory-defaults | 1.3.6.1.4.1.3967.1.1.5.4 | INTEGER | WO | optional | |||||||||||||||||
scalar · INTEGER · write-only · optional WRITE: set the configuration to factory defaults and reset the board. ATTENTION: Wait till board has fully rebooted before switching of power, to ensure that defaults are applied completly. Also propagade this to the user, that he has to wait until the reboot is complete. | |||||||||||||||||||||
| Sboard-reset | 1.3.6.1.4.1.3967.1.1.5.5 | INTEGER | WO | optional | |||||||||||||||||
scalar · INTEGER · write-only · optional WRITE: reset the board | |||||||||||||||||||||
| Sboot-default-app | 1.3.6.1.4.1.3967.1.1.5.6 | INTEGER | WO | optional | |||||||||||||||||
scalar · INTEGER · write-only · optional WRITE: boot the default application | |||||||||||||||||||||
| Sled-blinking | 1.3.6.1.4.1.3967.1.1.5.7 | INTEGER | RW | optional | |||||||||||||||||
scalar · INTEGER · read-write · optional WRITE: 1=power LED will flash for 7 sec READ: always 1 | |||||||||||||||||||||
| Tbsp-dev-errorTable | 1.3.6.1.4.1.3967.1.1.5.9 | NA | mandatory | ||||||||||||||||||
| Rbsp-dev-errorEntry | 1.3.6.1.4.1.3967.1.1.5.9.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory
| |||||||||||||||||||||
| Cbsp-dev-error | 1.3.6.1.4.1.3967.1.1.5.9.1.1 | INTEGER | RO | optional | |||||||||||||||||
column · INTEGER · read-only · optional READ: number of bsp devices that encountered an error | |||||||||||||||||||||
| Slivetime-max-temp | 1.3.6.1.4.1.3967.1.1.5.10 | INTEGER | RO | optional | |||||||||||||||||
scalar · INTEGER · read-only · optional READ: read the highest temerature during device livetime in tenths of degrees Celsius | |||||||||||||||||||||
| Slivetime-min-temp | 1.3.6.1.4.1.3967.1.1.5.11 | INTEGER | RO | optional | |||||||||||||||||
scalar · INTEGER · read-only · optional READ: read the lowest temerature during device livetime in tenths of degrees Celsius | |||||||||||||||||||||
| Slivetime-op-minutes | 1.3.6.1.4.1.3967.1.1.5.12 | INTEGER | RO | optional | |||||||||||||||||
scalar · INTEGER · read-only · optional READ: read the operation hours counter (total device livetime) | |||||||||||||||||||||
| Sstorage-list | 1.3.6.1.4.1.3967.1.1.5.13 | OCTET STRING | RO | optional | |||||||||||||||||
scalar · OCTET STRING · read-only · optional READ: Read the device storage list. ##desc:./doc/CONF_STORAGE_LIST.htm## | |||||||||||||||||||||
| Shd-rec-buffer | 1.3.6.1.4.1.3967.1.1.5.14 | OCTET STRING | RO | optional | |||||||||||||||||
scalar · OCTET STRING · read-only · optional READ: See RCP docu for command CONF_HD_REC_BUFFER | |||||||||||||||||||||
| Tsd-card-life-span-statusTable | 1.3.6.1.4.1.3967.1.1.5.15 | NA | mandatory | ||||||||||||||||||
| Rsd-card-life-span-statusEntry | 1.3.6.1.4.1.3967.1.1.5.15.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory | |||||||||||||||||||||
| Csd-card-life-span-status | 1.3.6.1.4.1.3967.1.1.5.15.1.1 | OCTET STRING | RO | optional | |||||||||||||||||
column · OCTET STRING · read-only · optional READ: See RCP docu for command CONF_SD_CARD_LIFE_SPAN_STATUS | |||||||||||||||||||||
| Slogin-limiter-message | 1.3.6.1.4.1.3967.1.1.5.16 | OCTET STRING | RO | optional | |||||||||||||||||
scalar · OCTET STRING · read-only · optional READ: neither read nor write access, only message, see detailed description ##desc:./doc/CONF_LOGIN_LIMITER_MESSAGE.htm## | |||||||||||||||||||||
| Spower-supply | 1.3.6.1.4.1.3967.1.1.6 | INTEGER | RO | optional | |||||||||||||||||
scalar · INTEGER · read-only · optional internal / deprecated, kept for reference | |||||||||||||||||||||
| TtemperatureTable | 1.3.6.1.4.1.3967.1.1.7 | NA | mandatory | ||||||||||||||||||
| RtemperatureEntry | 1.3.6.1.4.1.3967.1.1.7.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory
| |||||||||||||||||||||
| Ctemp-sens | 1.3.6.1.4.1.3967.1.1.7.1.1 | INTEGER | RO | optional | 420 | ||||||||||||||||
column · INTEGER · read-only · optional READ: value of the temperature sensor in tenths of degrees Celsius, specified by numdes, in case of negative temperature, the value wraps as 32 bit DWORD and needs to be casted to int Example values from LibreNMS test devices
| |||||||||||||||||||||
| Tfan-speedTable | 1.3.6.1.4.1.3967.1.1.8 | NA | mandatory | ||||||||||||||||||
| Rfan-speedEntry | 1.3.6.1.4.1.3967.1.1.8.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory
| |||||||||||||||||||||
| Cfan-speed | 1.3.6.1.4.1.3967.1.1.8.1.1 | INTEGER | RO | optional | |||||||||||||||||
column · INTEGER · read-only · optional internal / deprecated, kept for reference | |||||||||||||||||||||
| Tcpu-loadTable | 1.3.6.1.4.1.3967.1.1.9 | NA | mandatory | ||||||||||||||||||
| Rcpu-loadEntry | 1.3.6.1.4.1.3967.1.1.9.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory
| |||||||||||||||||||||
| Ccpu-load-idle | 1.3.6.1.4.1.3967.1.1.9.1.1 | INTEGER | RO | optional | 80 | ||||||||||||||||
column · INTEGER · read-only · optional READ: cpu load idle in percent Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ccpu-load-coder | 1.3.6.1.4.1.3967.1.1.9.1.2 | INTEGER | RO | optional | 16 | ||||||||||||||||
column · INTEGER · read-only · optional READ: cpu load coder in percent Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ccpu-load-vca | 1.3.6.1.4.1.3967.1.1.9.1.3 | INTEGER | RO | optional | 0 | ||||||||||||||||
column · INTEGER · read-only · optional READ: cpu load vca in percent Example values from LibreNMS test devices
| |||||||||||||||||||||
| Ccpu-load | 1.3.6.1.4.1.3967.1.1.9.1.4 | OCTET STRING | RO | optional | 4e:10:01:00 | ||||||||||||||||
column · OCTET STRING · read-only · optional READ: See RCP docu for command CONF_CPU_LOAD Example values from LibreNMS test devices
| |||||||||||||||||||||
| Spoe-granted-power | 1.3.6.1.4.1.3967.1.1.10 | INTEGER | RO | optional | |||||||||||||||||
scalar · INTEGER · read-only · optional READ: read the current poe power granted by switch / midspan in tenths of Watts | |||||||||||||||||||||
| Sstorage-load | 1.3.6.1.4.1.3967.1.1.11 | INTEGER | RO | optional | |||||||||||||||||
scalar · INTEGER · read-only · optional READ: load of local storage in percent | |||||||||||||||||||||
| Sconfig-sealing-status | 1.3.6.1.4.1.3967.1.1.12 | OCTET STRING | RO | optional | |||||||||||||||||
scalar · OCTET STRING · read-only · optional READ: return status of config seal, ##desc:./doc/CONF_CONFIG_SEALING_STATUS.htm## | |||||||||||||||||||||
| Thumidity-valueTable | 1.3.6.1.4.1.3967.1.1.13 | NA | mandatory | ||||||||||||||||||
| Rhumidity-valueEntry | 1.3.6.1.4.1.3967.1.1.13.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory
| |||||||||||||||||||||
| Chumidity-value | 1.3.6.1.4.1.3967.1.1.13.1.1 | INTEGER | RO | optional | |||||||||||||||||
column · INTEGER · read-only · optional READ: value of the humidity sensor specified by numdes (humidity 0 ... 100.00 % maps onto values 0 ... 10000) | |||||||||||||||||||||
| Nvideo | 1.3.6.1.4.1.3967.1.2 | ||||||||||||||||||||
| TinputTable | 1.3.6.1.4.1.3967.1.2.1 | NA | mandatory | ||||||||||||||||||
| RinputEntry | 1.3.6.1.4.1.3967.1.2.1.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory
| |||||||||||||||||||||
| Cinput-source-val | 1.3.6.1.4.1.3967.1.2.1.1.1 | INTEGER | RW | optional | |||||||||||||||||
column · INTEGER · read-write · optional WRITE: 1: camera; 2: vcr; 3: color_plane; 4: auto READ: 1: camera; 2: vcr; 3: color_plane; 4: auto | |||||||||||||||||||||
| TencoderTable | 1.3.6.1.4.1.3967.1.2.2 | NA | mandatory | ||||||||||||||||||
| RencoderEntry | 1.3.6.1.4.1.3967.1.2.2.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory | |||||||||||||||||||||
| Cvideo-encoder-status-ext | 1.3.6.1.4.1.3967.1.2.2.1.1 | OCTET STRING | RO | optional | |||||||||||||||||
column · OCTET STRING · read-only · optional READ: get encoder status (20 bytes) 1st DWORD: 10*frames per sec, 2nd DWORD: KBPS, 3rd DWORD: grab frame fps*10, 4th lost frame fps*10 due to overload, 5th DWORD skipped frame fps*10 due to configured enc interval in profile or STREAM_PRIORITY | |||||||||||||||||||||
| Cvideo-encoder-encoded-bytes | 1.3.6.1.4.1.3967.1.2.2.1.2 | INTEGER | RO | optional | |||||||||||||||||
column · INTEGER · read-only · optional READ: Get encoded bytes (32 Bit Counter) since bootup. Only supported for h.264 and Jpeg encoder. | |||||||||||||||||||||
| Nalarm | 1.3.6.1.4.1.3967.1.3 | ||||||||||||||||||||
| Tvideo-alarmTable | 1.3.6.1.4.1.3967.1.3.1 | NA | mandatory | ||||||||||||||||||
| Rvideo-alarmEntry | 1.3.6.1.4.1.3967.1.3.1.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory
| |||||||||||||||||||||
| Cvideo-alarm-state | 1.3.6.1.4.1.3967.1.3.1.1.1 | INTEGER | RO | optional | |||||||||||||||||
column · INTEGER · read-only · optional READ: 0=video alarm is off; 1=video alarm is on (no video signal detected at video input) | |||||||||||||||||||||
| Tmotion-detectorTable | 1.3.6.1.4.1.3967.1.3.2 | NA | mandatory | ||||||||||||||||||
| Rmotion-detectorEntry | 1.3.6.1.4.1.3967.1.3.2.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory
| |||||||||||||||||||||
| Cmotion-alarm-state | 1.3.6.1.4.1.3967.1.3.2.1.1 | INTEGER | RO | optional | |||||||||||||||||
column · INTEGER · read-only · optional READ: 0=motion alarm off; 1=motion alarm on (at elast one of the CONF_VIPROC_ALARM alarmbit (except the video loss alarm) is set | |||||||||||||||||||||
| Tviproc-alarmTable | 1.3.6.1.4.1.3967.1.3.3 | NA | mandatory | ||||||||||||||||||
| Rviproc-alarmEntry | 1.3.6.1.4.1.3967.1.3.3.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory
| |||||||||||||||||||||
| Cviproc-alarm | 1.3.6.1.4.1.3967.1.3.3.1.1 | OCTET STRING | RO | optional | |||||||||||||||||
column · OCTET STRING · read-only · optional READ: See RCP docu for command CONF_VIPROC_ALARM | |||||||||||||||||||||
| Tvirtual-alarmTable | 1.3.6.1.4.1.3967.1.3.4 | NA | mandatory | ||||||||||||||||||
| Rvirtual-alarmEntry | 1.3.6.1.4.1.3967.1.3.4.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory
| |||||||||||||||||||||
| Cvirtual-alarm-state | 1.3.6.1.4.1.3967.1.3.4.1.1 | INTEGER | RO | optional | |||||||||||||||||
column · INTEGER · read-only · optional READ: 0=virtual alarm off; 1=virtual alarm on | |||||||||||||||||||||
| Ndigital-io | 1.3.6.1.4.1.3967.1.4 | ||||||||||||||||||||
| Nout | 1.3.6.1.4.1.3967.1.4.1 | ||||||||||||||||||||
| TrelaisTable | 1.3.6.1.4.1.3967.1.4.1.1 | NA | mandatory | ||||||||||||||||||
| RrelaisEntry | 1.3.6.1.4.1.3967.1.4.1.1.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory
| |||||||||||||||||||||
| Crelay-output-state | 1.3.6.1.4.1.3967.1.4.1.1.1.1 | INTEGER | RW | optional | |||||||||||||||||
column · INTEGER · read-write · optional WRITE: set the logical level of an relay output READ: get the logical level of an relay output | |||||||||||||||||||||
| Nin | 1.3.6.1.4.1.3967.1.4.2 | ||||||||||||||||||||
| Tinput-pin-stateTable | 1.3.6.1.4.1.3967.1.4.2.1 | NA | mandatory | ||||||||||||||||||
| Rinput-pin-stateEntry | 1.3.6.1.4.1.3967.1.4.2.1.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory
| |||||||||||||||||||||
| Cinput-pin-state | 1.3.6.1.4.1.3967.1.4.2.1.1.1 | INTEGER | RO | optional | |||||||||||||||||
column · INTEGER · read-only · optional READ: 0=alarm input off; 1= alarm input on | |||||||||||||||||||||
| Nnetwork | 1.3.6.1.4.1.3967.1.5 | ||||||||||||||||||||
| Ninterface | 1.3.6.1.4.1.3967.1.5.1 | ||||||||||||||||||||
| Smac-address | 1.3.6.1.4.1.3967.1.5.1.1 | OCTET STRING | RO | optional | a4:18:94:0c:bc:57 | ||||||||||||||||
scalar · OCTET STRING · read-only · optional READ: read out the systems MAC address.##Num Values: 1=Ethernet; 2=WLAN; 3=Bluetooth Example values from LibreNMS test devices
| |||||||||||||||||||||
| Sip-str | 1.3.6.1.4.1.3967.1.5.1.2 | DisplayString | RW | optional | |||||||||||||||||
scalar · DisplayString · read-write · optional WRITE: Set the unit's IP address using string notation (xxx.xxx.xxx.xxx) READ: Read the unit's IP address using string notation (xxx.xxx.xxx.xxx)##Num Values: 0=Default; 1=Primary IP; 2=Auto IP (read direction) | |||||||||||||||||||||
| Ssubnet-str | 1.3.6.1.4.1.3967.1.5.1.3 | DisplayString | RW | optional | |||||||||||||||||
scalar · DisplayString · read-write · optional WRITE: set the subnet mask using string notation (xxx.xxx.xxx.xxx) READ: Read the subnet mask using string notation (xxx.xxx.xxx.xxx)##Num Values: 0=Default; 1=Primary IP Subnet; 2=Auto IP Subnet (read direction) | |||||||||||||||||||||
| Sgateway-ip-str | 1.3.6.1.4.1.3967.1.5.1.4 | DisplayString | RW | optional | |||||||||||||||||
scalar · DisplayString · read-write · optional WRITE: set the gateway IP using string notation (xxx.xxx.xxx.xxx) READ: read the gateway IP using string notation (xxx.xxx.xxx.xxx) | |||||||||||||||||||||
| Sdhcp-val | 1.3.6.1.4.1.3967.1.5.1.5 | INTEGER | RW | optional | |||||||||||||||||
scalar · INTEGER · read-write · optional WRITE: set DHCP mode READ: read DHCP mode ##Valuelist: 0=OFF; 1=ON (On write: Enables DHCP and kicks lease acquisition mechanism); 2=ON No Kick (Write only: enables DHCP mode in config, but does not kick lease acquisition mechanism); 3=ON+APIPA-Fallback | |||||||||||||||||||||
| Seth-link | 1.3.6.1.4.1.3967.1.5.1.6 | INTEGER | RW | optional | |||||||||||||||||
scalar · INTEGER · read-write · optional WRITE: (half duplex=HD, full duplex =FD) 0=auto, 1=10MbitHD, 2=10MbitFD, 3=100MbitHD, 4=100MbitFD, 5=1000MbitFD, 8=10GbitFD READ: (half duplex=HD, full duplex =FD) 0=auto, 1=10MbitHD, 2=10MbitFD, 3=100MbitHD, 4=100MbitFD | |||||||||||||||||||||
| Senable-traffic-led | 1.3.6.1.4.1.3967.1.5.1.7 | INTEGER | RW | optional | |||||||||||||||||
scalar · INTEGER · read-write · optional WRITE: Enables or disables the network activity LED (Dinion, NBC-255 camera) READ: network activity LED (Dinion, NBC-255 camera): 0=off; 1=on; 2=off 10 minutes after startup | |||||||||||||||||||||
| Teth-link-statusTable | 1.3.6.1.4.1.3967.1.5.1.8 | NA | mandatory | ||||||||||||||||||
| Reth-link-statusEntry | 1.3.6.1.4.1.3967.1.5.1.8.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory
| |||||||||||||||||||||
| Ceth-link-status | 1.3.6.1.4.1.3967.1.5.1.8.1.1 | INTEGER | RO | optional | |||||||||||||||||
column · INTEGER · read-only · optional READ: (half duplex=HD, full duplex =FD) 0=No link, 1=10MbitHD, 2=10MbitFD, 3=100MbitHD, 4=100MbitFD, 5=1000MbitFD, 7=Wlan; 8=10GbitFD | |||||||||||||||||||||
| Tsnmp-Table | 1.3.6.1.4.1.3967.1.5.2 | NA | mandatory | ||||||||||||||||||
| Rsnmp-Entry | 1.3.6.1.4.1.3967.1.5.2.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory
| |||||||||||||||||||||
| Csnmp-traps-host-str | 1.3.6.1.4.1.3967.1.5.2.1.1 | DisplayString | RW | optional | |||||||||||||||||
column · DisplayString · read-write · optional WRITE: not documented READ: not documented | |||||||||||||||||||||