MIB Browser

BCN-NTP-MIB

BlueCat Networks
This module provides status as well as statistical information
      about the NTP service.

Most of the OIDs defined on this MIB are based on the work done by
      A.S. Sethi and Dave Mills in the University of Delaware and published
      as:
Management of the Network Time Protocol (NTP) with SNMP
      Technical Report No. 98-09
      Other references used in the creation of this MIB are RFC-1305 and
      RFC-5905
Organization
BlueCat Networks
Root OID
1.3.6.1.4.1.13315.3.1.4.1
Last updated
Objects
64
Source
Show full MIB
snmptranslate -m BCN-NTP-MIB -Tp
snmpwalk -v2c -c <community> -m BCN-NTP-MIB <host> 1.3.6.1.4.1.13315.3.1.4.1

Imports

BCN-SMI-MIBbcnServices
BCN-TC-MIBBcnAlarmSeverity
INET-ADDRESS-MIBInetAddress, InetAddressType, InetPortNumber
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIBits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue

OID tree

NameOIDTypeAccessStatusExample
NbcnNtp1.3.6.1.4.1.13315.3.1.4
IbcnNtpMIB1.3.6.1.4.1.13315.3.1.4.1
NbcnNtpObjects1.3.6.1.4.1.13315.3.1.4.2
NbcnNtpServiceStatus1.3.6.1.4.1.13315.3.1.4.2.1
SbcnNtpSerOperState1.3.6.1.4.1.13315.3.1.4.2.1.1INTEGERROrunning(1)
NbcnNtpSystem1.3.6.1.4.1.13315.3.1.4.2.2
SbcnNtpSysLeap1.3.6.1.4.1.13315.3.1.4.2.2.1NTPLeapIndicatorRO
SbcnNtpSysStratum1.3.6.1.4.1.13315.3.1.4.2.2.2Integer32 (0..255)RO
SbcnNtpSysPrecision1.3.6.1.4.1.13315.3.1.4.2.2.3Integer32RO
SbcnNtpSysRootDelay1.3.6.1.4.1.13315.3.1.4.2.2.4DisplayStringRO
SbcnNtpSysRootDispersion1.3.6.1.4.1.13315.3.1.4.2.2.5DisplayStringRO
SbcnNtpSysRefId1.3.6.1.4.1.13315.3.1.4.2.2.6NTPRefIdRO
SbcnNtpSysRefTime1.3.6.1.4.1.13315.3.1.4.2.2.7NTPTimeStampRO
SbcnNtpSysPoll1.3.6.1.4.1.13315.3.1.4.2.2.8Integer32RO
SbcnNtpSysPeer1.3.6.1.4.1.13315.3.1.4.2.2.9Unsigned32RO
SbcnNtpSysFreq1.3.6.1.4.1.13315.3.1.4.2.2.10DisplayStringRO
SbcnNtpSysClock1.3.6.1.4.1.13315.3.1.4.2.2.11NTPTimeStampRO
SbcnNtpSysSystem1.3.6.1.4.1.13315.3.1.4.2.2.12DisplayStringRO
SbcnNtpSysProcessor1.3.6.1.4.1.13315.3.1.4.2.2.13DisplayStringRO
SbcnNtpSysJitter1.3.6.1.4.1.13315.3.1.4.2.2.14DisplayStringRO
NbcnNtpPeers1.3.6.1.4.1.13315.3.1.4.2.3
TbcnNtpPeersVarTable1.3.6.1.4.1.13315.3.1.4.2.3.1NA
RbcnNtpPeersVarEntry1.3.6.1.4.1.13315.3.1.4.2.3.1.1NA
CbcnNtpPeersAssocId1.3.6.1.4.1.13315.3.1.4.2.3.1.1.1Unsigned32NA
CbcnNtpPeersConfigured1.3.6.1.4.1.13315.3.1.4.2.3.1.1.2TruthValueRO
CbcnNtpPeersPeerAddressType1.3.6.1.4.1.13315.3.1.4.2.3.1.1.3InetAddressTypeRO
CbcnNtpPeersPeerAddress1.3.6.1.4.1.13315.3.1.4.2.3.1.1.4InetAddressRO
CbcnNtpPeersPeerPort1.3.6.1.4.1.13315.3.1.4.2.3.1.1.5InetPortNumberRO
CbcnNtpPeersHostAddressType1.3.6.1.4.1.13315.3.1.4.2.3.1.1.6InetAddressTypeRO
CbcnNtpPeersHostAddress1.3.6.1.4.1.13315.3.1.4.2.3.1.1.7InetAddressRO
CbcnNtpPeersHostPort1.3.6.1.4.1.13315.3.1.4.2.3.1.1.8InetPortNumberRO
CbcnNtpPeersLeap1.3.6.1.4.1.13315.3.1.4.2.3.1.1.9NTPLeapIndicatorRO
CbcnNtpPeersMode1.3.6.1.4.1.13315.3.1.4.2.3.1.1.10INTEGERRO
CbcnNtpPeersStratum1.3.6.1.4.1.13315.3.1.4.2.3.1.1.11Integer32 (0..255)RO
CbcnNtpPeersPeerPoll1.3.6.1.4.1.13315.3.1.4.2.3.1.1.12Integer32RO
CbcnNtpPeersHostPoll1.3.6.1.4.1.13315.3.1.4.2.3.1.1.13Integer32RO
CbcnNtpPeersPrecision1.3.6.1.4.1.13315.3.1.4.2.3.1.1.14Integer32RO
CbcnNtpPeersRootDelay1.3.6.1.4.1.13315.3.1.4.2.3.1.1.15DisplayStringRO
CbcnNtpPeersRootDispersion1.3.6.1.4.1.13315.3.1.4.2.3.1.1.16DisplayStringRO
CbcnNtpPeersRefId1.3.6.1.4.1.13315.3.1.4.2.3.1.1.17NTPRefIdRO
CbcnNtpPeersRefTime1.3.6.1.4.1.13315.3.1.4.2.3.1.1.18NTPTimeStampRO
CbcnNtpPeersOrgTime1.3.6.1.4.1.13315.3.1.4.2.3.1.1.19NTPTimeStampRO
CbcnNtpPeersReceiveTime1.3.6.1.4.1.13315.3.1.4.2.3.1.1.20NTPTimeStampRO
CbcnNtpPeersTransmitTime1.3.6.1.4.1.13315.3.1.4.2.3.1.1.21NTPTimeStampRO
CbcnNtpPeersReach1.3.6.1.4.1.13315.3.1.4.2.3.1.1.22Unsigned32RO
CbcnNtpPeersOffset1.3.6.1.4.1.13315.3.1.4.2.3.1.1.23DisplayStringRO
CbcnNtpPeersDelay1.3.6.1.4.1.13315.3.1.4.2.3.1.1.24DisplayStringRO
CbcnNtpPeersDispersion1.3.6.1.4.1.13315.3.1.4.2.3.1.1.25DisplayStringRO
CbcnNtpPeersJitter1.3.6.1.4.1.13315.3.1.4.2.3.1.1.26DisplayStringRO
NbcnNtpNotification1.3.6.1.4.1.13315.3.1.4.3
NbcnNtpNotificationEvents1.3.6.1.4.1.13315.3.1.4.3.0
!bcnNtpAlarmNotif1.3.6.1.4.1.13315.3.1.4.3.0.1
NbcnNtpNotificationData1.3.6.1.4.1.13315.3.1.4.3.1
SbcnNtpAlarmSeverity1.3.6.1.4.1.13315.3.1.4.3.1.1BcnAlarmSeverityAN
SbcnNtpAlarmInfo1.3.6.1.4.1.13315.3.1.4.3.1.2DisplayStringAN
NbcnNtpConformance1.3.6.1.4.1.13315.3.1.4.4
NbcnNtpServiceCompliances1.3.6.1.4.1.13315.3.1.4.4.1
MbcnNtpStatusCompliance1.3.6.1.4.1.13315.3.1.4.4.1.1
NbcnNtpServiceGroups1.3.6.1.4.1.13315.3.1.4.4.2
GbcnNtpServiceStatusGroup1.3.6.1.4.1.13315.3.1.4.4.2.1
GbcnNtpSystemGroup1.3.6.1.4.1.13315.3.1.4.4.2.2
GbcnNtpPeersGroup1.3.6.1.4.1.13315.3.1.4.4.2.3
GbcnNtpNotificationEventGroup1.3.6.1.4.1.13315.3.1.4.4.2.4
GbcnNtpNotificationDataGroup1.3.6.1.4.1.13315.3.1.4.4.2.5

Textual conventions

NTPLeapIndicator INTEGER

addSecond(1) alarm(3) noWarning(0) subtractSecond(2)

This is a two-bit code warning of an impending leap second to be
inserted in the NTP timescale. The bits are set before 23:59 on
the day of insertion and reset after 00:00 on the following day.
This causes the number of seconds (rollover interval) in the day
of insertion to be increased or decreased by one. In the case of
primary servers the bits are set by operator intervention, while
in the case of secondary servers the bits are set by the protocol.
The two bits, bit 0 and bit 1, respectively, are coded as follows:
   00, no warning
   01, last minute has 61 seconds
   10, last minute has 59 seconds
   11, alarm condition (clock not synchronized)
NTPRefId OCTET STRING (SIZE (4))

Display hint: 4x

32-bit code identifying the particular server or reference clock.
The interpretation depends on the value in the stratum field. For
packet stratum 0 (unspecified or invalid), this is a four-character
ASCII string. For stratum 1 (reference clock), this is a four-octet,
left-justified, zero-padded ASCII string assigned to the reference
clock.
Above stratum 1 (secondary servers and clients): this is the
reference identifier of the server and can be used to detect timing
loops. If using the IPv4 address family, the identifier is the four-
octet IPv4 address. If using the IPv6 address family, it is the first
four octets of the MD5 hash of the IPv6 address.
NTPTimeStamp OCTET STRING (SIZE (8))

Display hint: 4x.4x

NTP timestamps are represented as a 64-bit
unsigned fixed-point number, in seconds relative to
00:00 on 1 January 1900.  The integer part is in the
first 32 bits and the fraction part is in the last
32 bits.