SPSv1-MIB
Powertek Limitedsnmptranslate -m SPSv1-MIB -Tpsnmpwalk -v2c -c <community> -m SPSv1-MIB <host> 1.3.6.1.4.1.42610Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Npowertek | 1.3.6.1.4.1.42610 | ||||||||||||
| Nproduct | 1.3.6.1.4.1.42610.1 | ||||||||||||
| Npdu | 1.3.6.1.4.1.42610.1.4 | ||||||||||||
| Nsps | 1.3.6.1.4.1.42610.1.4.4 | ||||||||||||
| NpduObjects | 1.3.6.1.4.1.42610.1.4.4.1 | ||||||||||||
| NpduIdent | 1.3.6.1.4.1.42610.1.4.4.1.1 | ||||||||||||
| SpduIdentAgentSoftwareVersion | 1.3.6.1.4.1.42610.1.4.4.1.1.1 | DisplayString (SIZE (0..63)) | RO | mandatory | |||||||||
scalar · DisplayString (SIZE (0..63)) · read-only · mandatory The firmware version of the device. | |||||||||||||
| SpduIdentSerialNumber | 1.3.6.1.4.1.42610.1.4.4.1.1.2 | DisplayString (SIZE (0..31)) | RO | mandatory | |||||||||
scalar · DisplayString (SIZE (0..31)) · read-only · mandatory A Model of this device. | |||||||||||||
| NpduNetwork | 1.3.6.1.4.1.42610.1.4.4.1.2 | ||||||||||||
| NpduNetworkTcpip | 1.3.6.1.4.1.42610.1.4.4.1.2.1 | ||||||||||||
| SpduNetworkTcpipDhcpControl | 1.3.6.1.4.1.42610.1.4.4.1.2.1.1 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Enable/disable DHCP protocol
| |||||||||||||
| NpduNetworkTcpipIpv4 | 1.3.6.1.4.1.42610.1.4.4.1.2.1.2 | ||||||||||||
| SpduNetworkTcpipIpv4Address | 1.3.6.1.4.1.42610.1.4.4.1.2.1.2.1 | IpAddress | RW | mandatory | |||||||||
scalar · IpAddress · read-write · mandatory The ip address that NMS can identify the managed device. | |||||||||||||
| SpduNetworkTcpipIpv4Gateway | 1.3.6.1.4.1.42610.1.4.4.1.2.1.2.2 | IpAddress | RW | mandatory | |||||||||
scalar · IpAddress · read-write · mandatory The default gateway that allow device managed through routers. | |||||||||||||
| SpduNetworkTcpipIpv4Subnet | 1.3.6.1.4.1.42610.1.4.4.1.2.1.2.3 | IpAddress | RW | mandatory | |||||||||
scalar · IpAddress · read-write · mandatory Internet address subnet mask | |||||||||||||
| SpduNetworkTcpipIpv4PrimaryDNS | 1.3.6.1.4.1.42610.1.4.4.1.2.1.2.4 | IpAddress | RW | mandatory | |||||||||
scalar · IpAddress · read-write · mandatory Internet address of Primary DNS Server | |||||||||||||
| SpduNetworkTcpipIpv4SecondaryDNS | 1.3.6.1.4.1.42610.1.4.4.1.2.1.2.5 | IpAddress | RW | mandatory | |||||||||
scalar · IpAddress · read-write · mandatory Internet address of Secondary DNS | |||||||||||||
| NpduNetworkTcpipIpv6 | 1.3.6.1.4.1.42610.1.4.4.1.2.1.3 | ||||||||||||
| SpduNetworkTcpipIpv6Control | 1.3.6.1.4.1.42610.1.4.4.1.2.1.3.1 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Enable/disable IPv6 protocol
| |||||||||||||
| SpduNetworkTcpipIpv6AutoConfig | 1.3.6.1.4.1.42610.1.4.4.1.2.1.3.2 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory IPv6 Auto-config or Maual setting
| |||||||||||||
| SpduNetworkTcpipIpv6Address | 1.3.6.1.4.1.42610.1.4.4.1.2.1.3.3 | DisplayString (SIZE (0..63)) | RO | mandatory | |||||||||
scalar · DisplayString (SIZE (0..63)) · read-only · mandatory The ipv6 address that NMS can identify the managed device. | |||||||||||||
| SpduNetworkTcpipIpv6Prefix | 1.3.6.1.4.1.42610.1.4.4.1.2.1.3.4 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The prefix length for ipv6 address. | |||||||||||||
| SpduNetworkTcpipIpv6Router | 1.3.6.1.4.1.42610.1.4.4.1.2.1.3.5 | DisplayString (SIZE (0..63)) | RO | mandatory | |||||||||
scalar · DisplayString (SIZE (0..63)) · read-only · mandatory The default gateway that allow device managed through routers. | |||||||||||||
| SpduNetworkTcpipIpv6PrimaryDNS | 1.3.6.1.4.1.42610.1.4.4.1.2.1.3.6 | DisplayString (SIZE (0..63)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (0..63)) · read-write · mandatory Internet address of Primary DNS Server | |||||||||||||
| SpduNetworkTcpipIpv6SecondaryDNS | 1.3.6.1.4.1.42610.1.4.4.1.2.1.3.7 | DisplayString (SIZE (0..63)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (0..63)) · read-write · mandatory Internet address of Secondary DNS | |||||||||||||
| NpduNetworkSecurity | 1.3.6.1.4.1.42610.1.4.4.1.2.2 | ||||||||||||
| SpduNetworkSecurityControl | 1.3.6.1.4.1.42610.1.4.4.1.2.2.1 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Enable/disable Network Access Protection
| |||||||||||||
| NpduNetworkSecuritySsh | 1.3.6.1.4.1.42610.1.4.4.1.2.2.2 | ||||||||||||
| SpduNetworkSecuritySshControl | 1.3.6.1.4.1.42610.1.4.4.1.2.2.2.1 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Enable/disable SSH Access Protection
| |||||||||||||
| SpduNetworkSecuritySshInterval | 1.3.6.1.4.1.42610.1.4.4.1.2.2.2.2 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Detecting Interval of SSH Access Protection
| |||||||||||||
| SpduNetworkSecuritySshFailTimes | 1.3.6.1.4.1.42610.1.4.4.1.2.2.2.3 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Unsuccessful attempts of SSH Access Protection
| |||||||||||||
| SpduNetworkSecuritySshBlock | 1.3.6.1.4.1.42610.1.4.4.1.2.2.2.4 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Block Time of SSH Access Protection
| |||||||||||||
| NpduNetworkSecuritySnmp | 1.3.6.1.4.1.42610.1.4.4.1.2.2.3 | ||||||||||||
| SpduNetworkSecuritySnmpControl | 1.3.6.1.4.1.42610.1.4.4.1.2.2.3.1 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Enable/disable SNMP Access Protection
| |||||||||||||
| SpduNetworkSecuritySnmpInterval | 1.3.6.1.4.1.42610.1.4.4.1.2.2.3.2 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Detecting Interval of SNMP Access Protection
| |||||||||||||
| SpduNetworkSecuritySnmpFailTimes | 1.3.6.1.4.1.42610.1.4.4.1.2.2.3.3 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Unsuccessful attempts of SNMP Access Protection
| |||||||||||||
| SpduNetworkSecuritySnmpBlock | 1.3.6.1.4.1.42610.1.4.4.1.2.2.3.4 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Block Time of SNMP Access Protection
| |||||||||||||
| NpduNetworkSecurityHttp | 1.3.6.1.4.1.42610.1.4.4.1.2.2.4 | ||||||||||||
| SpduNetworkSecurityHttpControl | 1.3.6.1.4.1.42610.1.4.4.1.2.2.4.1 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Enable/disable HTTP Access Protection
| |||||||||||||
| SpduNetworkSecurityHttpInterval | 1.3.6.1.4.1.42610.1.4.4.1.2.2.4.2 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Detecting Interval of HTTP Access Protection
| |||||||||||||
| SpduNetworkSecurityHttpFailTimes | 1.3.6.1.4.1.42610.1.4.4.1.2.2.4.3 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Unsuccessful attempts of HTTP Access Protection
| |||||||||||||
| SpduNetworkSecurityHttpBlock | 1.3.6.1.4.1.42610.1.4.4.1.2.2.4.4 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Block Time of HTTP Access Protection
| |||||||||||||
| NpduNetworkService | 1.3.6.1.4.1.42610.1.4.4.1.2.3 | ||||||||||||
| NpduNetworkServiceSsh | 1.3.6.1.4.1.42610.1.4.4.1.2.3.1 | ||||||||||||
| SpduNetworkServiceSshControl | 1.3.6.1.4.1.42610.1.4.4.1.2.3.1.1 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Enable/disable SSH Server Service
| |||||||||||||
| SpduNetworkServiceSshPort | 1.3.6.1.4.1.42610.1.4.4.1.2.3.1.2 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The Port Number of SSH Server Service | |||||||||||||
| NpduNetworkServiceSsl | 1.3.6.1.4.1.42610.1.4.4.1.2.3.2 | ||||||||||||
| SpduNetworkServiceSslControl | 1.3.6.1.4.1.42610.1.4.4.1.2.3.2.1 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Enable/disable HTTPs Server Service
| |||||||||||||
| SpduNetworkServiceSslPort | 1.3.6.1.4.1.42610.1.4.4.1.2.3.2.2 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The Port Number of HTTPs Server Service | |||||||||||||
| SpduNetworkServiceSslForce | 1.3.6.1.4.1.42610.1.4.4.1.2.3.2.3 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Force use HTTPs Server Service only.
| |||||||||||||
| SpduNetworkServicePingControl | 1.3.6.1.4.1.42610.1.4.4.1.2.3.3 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Enable/disable to response to PING request.
| |||||||||||||
| NpduNetworkServiceRadius | 1.3.6.1.4.1.42610.1.4.4.1.2.3.4 | ||||||||||||
| SpduNetworkServiceRadiusControl | 1.3.6.1.4.1.42610.1.4.4.1.2.3.4.1 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Enable/disable RADIUS Client Service
| |||||||||||||
| SpduNetworkServiceRadiusIp | 1.3.6.1.4.1.42610.1.4.4.1.2.3.4.2 | DisplayString (SIZE (0..63)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (0..63)) · read-write · mandatory The IP Address of RADIUS Client Service | |||||||||||||
| SpduNetworkServiceRadiusPort | 1.3.6.1.4.1.42610.1.4.4.1.2.3.4.3 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The Port Number of RADIUS Client Service | |||||||||||||
| SpduNetworkServiceRadiusSecretKey | 1.3.6.1.4.1.42610.1.4.4.1.2.3.4.4 | DisplayString (SIZE (0..31)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (0..31)) · read-write · mandatory The Secret Key of RADIUS Client Service | |||||||||||||
| SpduNetworkServiceRadiusTimeout | 1.3.6.1.4.1.42610.1.4.4.1.2.3.4.5 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The Timeout Interval of RADIUS Client Service in seconds | |||||||||||||
| SpduNetworkServiceRadiusRetry | 1.3.6.1.4.1.42610.1.4.4.1.2.3.4.6 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The Retry Times of RADIUS Client Service | |||||||||||||
| NpduSystem | 1.3.6.1.4.1.42610.1.4.4.1.3 | ||||||||||||
| SpduSystemName | 1.3.6.1.4.1.42610.1.4.4.1.3.1 | DisplayString (SIZE (0..31)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (0..31)) · read-write · mandatory The name of system. | |||||||||||||
| SpduSystemContact | 1.3.6.1.4.1.42610.1.4.4.1.3.2 | DisplayString (SIZE (0..31)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (0..31)) · read-write · mandatory The contact of system. | |||||||||||||
| SpduSystemLocation | 1.3.6.1.4.1.42610.1.4.4.1.3.3 | DisplayString (SIZE (0..31)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (0..31)) · read-write · mandatory The location of system. | |||||||||||||
| SpduSystemLogInterval | 1.3.6.1.4.1.42610.1.4.4.1.3.4 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The Log Interval of device | |||||||||||||
| SpduSystemWebRefresh | 1.3.6.1.4.1.42610.1.4.4.1.3.5 | INTEGER (3..60) | RW | mandatory | |||||||||
scalar · INTEGER (3..60) · read-write · mandatory The Web Refresh Interval of device | |||||||||||||
| NpduSystemTime | 1.3.6.1.4.1.42610.1.4.4.1.3.6 | ||||||||||||
| SpduSystemTimeDisplay | 1.3.6.1.4.1.42610.1.4.4.1.3.6.1 | DisplayString | RO | mandatory | |||||||||
scalar · DisplayString · read-only · mandatory The date/time in agent | |||||||||||||
| SpduSystemTimeZone | 1.3.6.1.4.1.42610.1.4.4.1.3.6.2 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Time Zone to use when synchronize with NTP server.
| |||||||||||||
| SpduSystemTimeFormat | 1.3.6.1.4.1.42610.1.4.4.1.3.6.3 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Date Format
| |||||||||||||
| SpduSystemTimeSetting | 1.3.6.1.4.1.42610.1.4.4.1.3.6.4 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Time Setting
| |||||||||||||
| SpduSystemTimeDayLightSaving | 1.3.6.1.4.1.42610.1.4.4.1.3.6.5 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Enable/disable the Day Light Saving when synchronize with NTP server.
| |||||||||||||
| NpduSystemTimeManual | 1.3.6.1.4.1.42610.1.4.4.1.3.6.6 | ||||||||||||
| SpduSystemTimeManualDate | 1.3.6.1.4.1.42610.1.4.4.1.3.6.6.1 | DisplayString (SIZE (10)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (10)) · read-write · mandatory The date in agent, format is (dd/mm/yyyy) | |||||||||||||
| SpduSystemTimeManualTime | 1.3.6.1.4.1.42610.1.4.4.1.3.6.6.2 | DisplayString (SIZE (8)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (8)) · read-write · mandatory The time in agent, format is (hh:mm:ss) | |||||||||||||
| NpduSystemTimeNtp | 1.3.6.1.4.1.42610.1.4.4.1.3.6.7 | ||||||||||||
| SpduSystemTimeNtpControl | 1.3.6.1.4.1.42610.1.4.4.1.3.6.7.1 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Enable or disable the agent to synchronize date/time with NTP server.
| |||||||||||||
| SpduSystemTimeNtpServer | 1.3.6.1.4.1.42610.1.4.4.1.3.6.7.2 | DisplayString (SIZE (0..63)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (0..63)) · read-write · mandatory The ip address of NTP server. | |||||||||||||
| SpduSystemTimeNtpSyncInterval | 1.3.6.1.4.1.42610.1.4.4.1.3.6.7.3 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The Sync Interval with NTP server. | |||||||||||||
| SpduSystemTimeNtpSyncUnit | 1.3.6.1.4.1.42610.1.4.4.1.3.6.7.4 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The Unit of Sync Interval
| |||||||||||||
| SpduSystemResetToDefault | 1.3.6.1.4.1.42610.1.4.4.1.3.7 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Reset the parameter of PDU to default.
| |||||||||||||
| SpduSystemReboot | 1.3.6.1.4.1.42610.1.4.4.1.3.8 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Reboot the system of PDU.
| |||||||||||||
| NpduSNMP | 1.3.6.1.4.1.42610.1.4.4.1.4 | ||||||||||||
| SpduSnmpControl | 1.3.6.1.4.1.42610.1.4.4.1.4.1 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Enable/disable SNMP protocol.
| |||||||||||||
| SpduSnmpPort | 1.3.6.1.4.1.42610.1.4.4.1.4.2 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The UDP port for SNMP. | |||||||||||||
| SpduSnmpVersion | 1.3.6.1.4.1.42610.1.4.4.1.4.3 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Set SNMP version.
| |||||||||||||
| TpduSnmpTrapsReceiversTable | 1.3.6.1.4.1.42610.1.4.4.1.4.4 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A list of managers to send traps to. The number of entries is given by the value of pduSnmpNumTrapReceivers | |||||||||||||
| RpduSnmpTrapsReceiversEntry | 1.3.6.1.4.1.42610.1.4.4.1.4.4.1 | NA | mandatory | ||||||||||
| CtrapsIndex | 1.3.6.1.4.1.42610.1.4.4.1.4.4.1.1 | INTEGER (0..15) | RO | mandatory | |||||||||
column · INTEGER (0..15) · read-only · mandatory The index to a trap receiver entry. | |||||||||||||
| CtrapsReceiverAddr | 1.3.6.1.4.1.42610.1.4.4.1.4.4.1.2 | DisplayString (SIZE (0..31)) | RW | mandatory | |||||||||
column · DisplayString (SIZE (0..31)) · read-write · mandatory The IP address of the manager to send a trap to. | |||||||||||||
| CreceiverEventLevel | 1.3.6.1.4.1.42610.1.4.4.1.4.4.1.3 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The severity level of traps to be received by this manager.
| |||||||||||||
| CreceiverSnmpVer | 1.3.6.1.4.1.42610.1.4.4.1.4.4.1.4 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The SNMP Trap version of trap receivers.
| |||||||||||||
| CreceiverDescription | 1.3.6.1.4.1.42610.1.4.4.1.4.4.1.5 | DisplayString (SIZE (0..63)) | RW | mandatory | |||||||||
column · DisplayString (SIZE (0..63)) · read-write · mandatory Description of trap receivers | |||||||||||||
| NpduEmail | 1.3.6.1.4.1.42610.1.4.4.1.5 | ||||||||||||
| SpduEmailServer | 1.3.6.1.4.1.42610.1.4.4.1.5.1 | DisplayString (SIZE (0..63)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (0..63)) · read-write · mandatory The address of Email server. | |||||||||||||
| SpduEmailPort | 1.3.6.1.4.1.42610.1.4.4.1.5.2 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The UDP port for Email Server. | |||||||||||||
| SpduEmailSenderEmail | 1.3.6.1.4.1.42610.1.4.4.1.5.3 | DisplayString (SIZE (0..63)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (0..63)) · read-write · mandatory The sender's Email address | |||||||||||||
| SpduEmailPrefix | 1.3.6.1.4.1.42610.1.4.4.1.5.4 | DisplayString (SIZE (0..31)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (0..31)) · read-write · mandatory The prefix string of mail subject | |||||||||||||
| SpduEmailAuthControl | 1.3.6.1.4.1.42610.1.4.4.1.5.5 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Enable/disable SMTP Authentication.
| |||||||||||||
| SpduEmailAuthUsername | 1.3.6.1.4.1.42610.1.4.4.1.5.6 | DisplayString (SIZE (0..31)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (0..31)) · read-write · mandatory The user name of SMTP Authentication | |||||||||||||
| SpduEmailAuthPassword | 1.3.6.1.4.1.42610.1.4.4.1.5.7 | DisplayString (SIZE (0..31)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (0..31)) · read-write · mandatory The password of SMTP Authentication | |||||||||||||
| TpduEmailReceiversTable | 1.3.6.1.4.1.42610.1.4.4.1.5.8 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A list of managers to send email notification to. | |||||||||||||
| RpduEmailReceiversEntry | 1.3.6.1.4.1.42610.1.4.4.1.5.8.1 | NA | mandatory | ||||||||||
| CmailRecvIndex | 1.3.6.1.4.1.42610.1.4.4.1.5.8.1.1 | INTEGER (0..15) | RO | mandatory | |||||||||
column · INTEGER (0..15) · read-only · mandatory The index to a email notification receiver entry. | |||||||||||||
| CmailRecvReceiverAddr | 1.3.6.1.4.1.42610.1.4.4.1.5.8.1.2 | DisplayString (SIZE (0..63)) | RW | mandatory | |||||||||
column · DisplayString (SIZE (0..63)) · read-write · mandatory The Email address of the manager to send a email notification to. | |||||||||||||
| CmailRecvEmailType | 1.3.6.1.4.1.42610.1.4.4.1.5.8.1.3 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Email Type of email notification receivers.
| |||||||||||||
| CmailRecvEventLevel | 1.3.6.1.4.1.42610.1.4.4.1.5.8.1.4 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The severity level of email notification to be received by this manager.
| |||||||||||||
| CmailRecvDescription | 1.3.6.1.4.1.42610.1.4.4.1.5.8.1.5 | DisplayString (SIZE (0..63)) | RW | mandatory | |||||||||
column · DisplayString (SIZE (0..63)) · read-write · mandatory Description of email notification receivers | |||||||||||||
| NpduPwrMonitoring | 1.3.6.1.4.1.42610.1.4.4.1.6 | ||||||||||||
| NpduPwrMonitoringInlet | 1.3.6.1.4.1.42610.1.4.4.1.6.1 | ||||||||||||
| SpduPwrMonitoringInletNum | 1.3.6.1.4.1.42610.1.4.4.1.6.1.1 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The number of Inlet. | |||||||||||||
| TpduPwrMonitoringInletStatusTable | 1.3.6.1.4.1.42610.1.4.4.1.6.1.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A list to display status of Inlet. | |||||||||||||
| RpduPwrMonitoringInletStatusEntry | 1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1 | NA | mandatory | ||||||||||
| CinletIndex | 1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.1 | INTEGER (0..3) | RO | mandatory | 0 | ||||||||
| CinletPowerAll | 1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.2 | INTEGER | RO | mandatory | 6440 | ||||||||
| CinletResetFrom | 1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.3 | DisplayString | RO | mandatory | 10/09/2019 11:31:00 | ||||||||
| CinletEnergy | 1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.4 | INTEGER | RO | mandatory | 3470594 | ||||||||
| CinletStatus | 1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.5 | INTEGER | RO | mandatory | normal(1) | ||||||||
column · INTEGER · read-only · mandatory The Status of inlet.
Example values from LibreNMS test devices
| |||||||||||||
| CinletCurrPhase1 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.6 | INTEGER | RO | mandatory | 283 | ||||||||
| CinletCurrPhase2 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.7 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory The phase2 current of inlet.
Example values from LibreNMS test devices
| |||||||||||||
| CinletCurrPhase3 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.8 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory The phase3 current of inlet.
Example values from LibreNMS test devices
| |||||||||||||
| CinletVoltPhase1 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.9 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory The phase1 voltage of inlet.
Example values from LibreNMS test devices
| |||||||||||||
| CinletVoltPhase2 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.10 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory The phase2 voltage of inlet.
Example values from LibreNMS test devices
| |||||||||||||
| CinletVoltPhase3 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.11 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory The phase3 voltage of inlet.
Example values from LibreNMS test devices
| |||||||||||||
| CinletPwrFactorPhase1 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.12 | INTEGER | RO | mandatory | 313 | ||||||||
| CinletPwrFactorPhase2 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.13 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory The phase2 power factor of inlet.
Example values from LibreNMS test devices
| |||||||||||||
| CinletPwrFactorPhase3 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.14 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory The phase3 power factor of inlet.
Example values from LibreNMS test devices
| |||||||||||||
| CinletPowerPhase1 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.15 | INTEGER | RO | mandatory | 2287 | ||||||||
| CinletPowerPhase2 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.16 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory The phase2 power of inlet.
Example values from LibreNMS test devices
| |||||||||||||
| CinletPowerPhase3 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.17 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory The phase3 power of inlet.
Example values from LibreNMS test devices
| |||||||||||||
| CinletStatusPhase1 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.18 | INTEGER | RO | mandatory | 872 | ||||||||
| CinletStatusPhase2 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.19 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory The phase2 status of inlet.
Example values from LibreNMS test devices
| |||||||||||||
| CinletStatusPhase3 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.20 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory The phase3 status of inlet.
Example values from LibreNMS test devices
| |||||||||||||
| TpduPwrMonitoringInletCfgTable | 1.3.6.1.4.1.42610.1.4.4.1.6.1.3 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A list to configure thresholds of inlet. | |||||||||||||
| RpduPwrMonitoringInletCfgEntry | 1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1 | NA | mandatory | ||||||||||
| CinletCfgIndex | 1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.1 | INTEGER (0..3) | RO | mandatory | |||||||||
column · INTEGER (0..3) · read-only · mandatory The index to inlet configuration entry. | |||||||||||||
| CinletCfgLoadCritical | 1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.2 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Critical Threshold of inlet load.
| |||||||||||||
| CinletCfgLoadWarning | 1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.3 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Warning Threshold of inlet load.
| |||||||||||||
| CinletCfgCurrCritPhase1 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.4 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Critical Threshold of pahse1 current of inlet.
| |||||||||||||
| CinletCfgCurrCritPhase2 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.5 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Critical Threshold of pahse2 current of inlet.
| |||||||||||||
| CinletCfgCurrCritPhase3 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.6 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Critical Threshold of pahse3 current of inlet.
| |||||||||||||
| CinletCfgCurrWarnPhase1 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.7 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Warning Threshold of pahse1 current of inlet.
| |||||||||||||
| CinletCfgCurrWarnPhase2 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.8 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Warning Threshold of pahse2 current of inlet.
| |||||||||||||
| CinletCfgCurrWarnPhase3 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.9 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Warning Threshold of pahse3 current of inlet.
| |||||||||||||
| CinletCfgVoltCritPhase1 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.10 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Critical Threshold of pahse1 voltage of inlet.
| |||||||||||||
| CinletCfgVoltCritPhase2 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.11 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Critical Threshold of pahse2 voltage of inlet.
| |||||||||||||
| CinletCfgVoltCritPhase3 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.12 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Critical Threshold of pahse3 voltage of inlet.
| |||||||||||||
| CinletCfgVoltWarnPhase1 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.13 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Warning Threshold of pahse1 voltage of inlet.
| |||||||||||||
| CinletCfgVoltWarnPhase2 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.14 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Warning Threshold of pahse2 voltage of inlet.
| |||||||||||||
| CinletCfgVoltWarnPhase3 | 1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.15 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Warning Threshold of pahse3 voltage of inlet.
| |||||||||||||
| NpduPwrMonitoringOutlet | 1.3.6.1.4.1.42610.1.4.4.1.6.2 | ||||||||||||
| NpduPwrMonitoringOutletPduA | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1 | ||||||||||||
| SpduPwrMonitoringOutletNumPduA | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.1 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The number of PduA Outlet. | |||||||||||||
| TpduPwrMonitoringOutletStatusTablePduA | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A list to display status of PduA outlet. | |||||||||||||
| RpduPwrMonitoringOutletStatusPduAEntry | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1 | NA | mandatory | ||||||||||
| CoutletPduAIndex | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.1 | INTEGER (0..41) | RO | mandatory | |||||||||
column · INTEGER (0..41) · read-only · mandatory The index to outlet status of PduA. | |||||||||||||
| CoutletPduAState | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.2 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The state of PduA outlet.
| |||||||||||||
| CoutletPduACurrent | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.3 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The current of PduA outlet.
| |||||||||||||
| CoutletPduAPwrFactor | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.4 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The power factor of PduA outlet.
| |||||||||||||
| CoutletPduAPower | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.5 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The power of PduA outlet.
| |||||||||||||
| CoutletPduAEnergy | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.6 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The energy of PduA outlet.
| |||||||||||||
| CoutletPduAResetFrom | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.7 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The reset date of PduA outlet. | |||||||||||||
| CoutletPduAStatus | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.8 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The status of PduA outlet.
| |||||||||||||
| TpduPwrMonitoringOutletCfgTablePduA | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A list to display configuration of PduA outlet. | |||||||||||||
| RpduPwrMonitoringOutletCfgPduAEntry | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A list to display configuration of PduA outlet.
| |||||||||||||
| CoutletCfgPduAIndex | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.1 | INTEGER (0..41) | RO | mandatory | |||||||||
column · INTEGER (0..41) · read-only · mandatory The index to outlet configuration of PduA. | |||||||||||||
| CoutletCfgPduAName | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.2 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The name for outlet of PduA. | |||||||||||||
| CoutletCfgPduADelayOnStatus | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.3 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Delay On status of PduA outlet.
| |||||||||||||
| CoutletCfgPduADelayOnTime | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.4 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Delay On time of PduA outlet.
| |||||||||||||
| CoutletCfgPduADelayOffStatus | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.5 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Delay Off status of PduA outlet.
| |||||||||||||
| CoutletCfgPduADelayOffTime | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.6 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Delay Off time of PduA outlet.
| |||||||||||||
| CoutletCfgPduAReboot | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.7 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Delay On reboot duration of PduA outlet.
| |||||||||||||
| CoutletCfgPduAOverCurrCritical | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.8 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Critical Threshold of current of PduA outlet.
| |||||||||||||
| CoutletCfgPduAOverCurrWarning | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.9 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Warning Threshold of current of PduA outlet.
| |||||||||||||
| CoutletCfgPduAOverPwrCritical | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.10 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Critical Threshold of power of PduA outlet.
| |||||||||||||
| CoutletCfgPduAOverPwrWarning | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.11 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Warning Threshold of power of PduA outlet.
| |||||||||||||
| TpduPwrMonitoringOutletCtlTablePduA | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.4 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A list to display control of PduA outlet. | |||||||||||||
| RpduPwrMonitoringOutletCtlPduAEntry | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.4.1 | NA | mandatory | ||||||||||
| CoutletCtlPduAIndex | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.4.1.1 | INTEGER (0..41) | RO | mandatory | |||||||||
column · INTEGER (0..41) · read-only · mandatory The index to outlet control of PduA. | |||||||||||||
| CoutletCtlPduAControl | 1.3.6.1.4.1.42610.1.4.4.1.6.2.1.4.1.2 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The control-type of PduA outlet.
| |||||||||||||
| NpduPwrMonitoringOutletPduB | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2 | ||||||||||||
| SpduPwrMonitoringOutletNumPduB | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.1 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The number of PduB Outlet. | |||||||||||||
| TpduPwrMonitoringOutletStatusTablePduB | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A list to display status of PduB outlet. | |||||||||||||
| RpduPwrMonitoringOutletStatusPduBEntry | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1 | NA | mandatory | ||||||||||
| CoutletPduBIndex | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.1 | INTEGER (0..41) | RO | mandatory | |||||||||
column · INTEGER (0..41) · read-only · mandatory The index to outlet status of PduB. | |||||||||||||
| CoutletPduBState | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.2 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The state of PduB outlet.
| |||||||||||||
| CoutletPduBCurrent | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.3 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The current of PduB outlet.
| |||||||||||||
| CoutletPduBPwrFactor | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.4 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The power factor of PduB outlet.
| |||||||||||||
| CoutletPduBPower | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.5 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The power of PduB outlet.
| |||||||||||||
| CoutletPduBEnergy | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.6 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The energy of PduB outlet.
| |||||||||||||
| CoutletPduBResetFrom | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.7 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The reset date of PduB outlet. | |||||||||||||
| CoutletPduBStatus | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.8 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The status of PduB outlet.
| |||||||||||||
| TpduPwrMonitoringOutletCfgTablePduB | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A list to display configuration of PduB outlet. | |||||||||||||
| RpduPwrMonitoringOutletCfgPduBEntry | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A list to display configuration of PduB outlet.
| |||||||||||||
| CoutletCfgPduBIndex | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.1 | INTEGER (0..41) | RO | mandatory | |||||||||
column · INTEGER (0..41) · read-only · mandatory The index to outlet configuration of PduB. | |||||||||||||
| CoutletCfgPduBName | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.2 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The name for outlet of PduB. | |||||||||||||
| CoutletCfgPduBDelayOnStatus | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.3 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Delay On status of PduB outlet.
| |||||||||||||
| CoutletCfgPduBDelayOnTime | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.4 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Delay On time of PduB outlet.
| |||||||||||||
| CoutletCfgPduBDelayOffStatus | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.5 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Delay Off status of PduB outlet.
| |||||||||||||
| CoutletCfgPduBDelayOffTime | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.6 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Delay Off time of PduB outlet.
| |||||||||||||
| CoutletCfgPduBReboot | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.7 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Delay On reboot duration of PduB outlet.
| |||||||||||||
| CoutletCfgPduBOverCurrCritical | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.8 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Critical Threshold of current of PduB outlet.
| |||||||||||||
| CoutletCfgPduBOverCurrWarning | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.9 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Warning Threshold of current of PduB outlet.
| |||||||||||||
| CoutletCfgPduBOverPwrCritical | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.10 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Critical Threshold of power of PduB outlet.
| |||||||||||||
| CoutletCfgPduBOverPwrWarning | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.11 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Warning Threshold of power of PduB outlet.
| |||||||||||||
| TpduPwrMonitoringOutletCtlTablePduB | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.4 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A list to display control of PduB outlet. | |||||||||||||
| RpduPwrMonitoringOutletCtlPduBEntry | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.4.1 | NA | mandatory | ||||||||||
| CoutletCtlPduBIndex | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.4.1.1 | INTEGER (0..41) | RO | mandatory | |||||||||
column · INTEGER (0..41) · read-only · mandatory The index to outlet control of PduB. | |||||||||||||
| CoutletCtlPduBControl | 1.3.6.1.4.1.42610.1.4.4.1.6.2.2.4.1.2 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The control-type of PduB outlet.
| |||||||||||||
| NpduPwrMonitoringOutletPduC | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3 | ||||||||||||
| SpduPwrMonitoringOutletNumPduC | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.1 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The number of PduC Outlet. | |||||||||||||
| TpduPwrMonitoringOutletStatusTablePduC | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A list to display status of PduC outlet. | |||||||||||||
| RpduPwrMonitoringOutletStatusPduCEntry | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1 | NA | mandatory | ||||||||||
| CoutletPduCIndex | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.1 | INTEGER (0..41) | RO | mandatory | |||||||||
column · INTEGER (0..41) · read-only · mandatory The index to outlet status of PduC. | |||||||||||||
| CoutletPduCState | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.2 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The state of PduC outlet.
| |||||||||||||
| CoutletPduCCurrent | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.3 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The current of PduC outlet.
| |||||||||||||
| CoutletPduCPwrFactor | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.4 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The power factor of PduC outlet.
| |||||||||||||
| CoutletPduCPower | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.5 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The power of PduC outlet.
| |||||||||||||
| CoutletPduCEnergy | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.6 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The energy of PduC outlet.
| |||||||||||||
| CoutletPduCResetFrom | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.7 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The reset date of PduC outlet. | |||||||||||||
| CoutletPduCStatus | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.8 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The status of PduC outlet.
| |||||||||||||
| TpduPwrMonitoringOutletCfgTablePduC | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A list to display configuration of PduC outlet. | |||||||||||||
| RpduPwrMonitoringOutletCfgPduCEntry | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A list to display configuration of PduC outlet.
| |||||||||||||
| CoutletCfgPduCIndex | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.1 | INTEGER (0..41) | RO | mandatory | |||||||||
column · INTEGER (0..41) · read-only · mandatory The index to outlet configuration of PduC. | |||||||||||||
| CoutletCfgPduCName | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.2 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The name for outlet of PduC. | |||||||||||||
| CoutletCfgPduCDelayOnStatus | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.3 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Delay On status of PduC outlet.
| |||||||||||||
| CoutletCfgPduCDelayOnTime | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.4 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Delay On time of PduC outlet.
| |||||||||||||
| CoutletCfgPduCDelayOffStatus | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.5 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Delay Off status of PduC outlet.
| |||||||||||||
| CoutletCfgPduCDelayOffTime | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.6 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Delay Off time of PduC outlet.
| |||||||||||||
| CoutletCfgPduCReboot | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.7 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Delay On reboot duration of PduC outlet.
| |||||||||||||
| CoutletCfgPduCOverCurrCritical | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.8 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Critical Threshold of current of PduC outlet.
| |||||||||||||
| CoutletCfgPduCOverCurrWarning | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.9 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Warning Threshold of current of PduC outlet.
| |||||||||||||
| CoutletCfgPduCOverPwrCritical | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.10 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Critical Threshold of power of PduC outlet.
| |||||||||||||
| CoutletCfgPduCOverPwrWarning | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.11 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Warning Threshold of power of PduC outlet.
| |||||||||||||
| TpduPwrMonitoringOutletCtlTablePduC | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.4 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A list to display control of PduC outlet. | |||||||||||||
| RpduPwrMonitoringOutletCtlPduCEntry | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.4.1 | NA | mandatory | ||||||||||
| CoutletCtlPduCIndex | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.4.1.1 | INTEGER (0..41) | RO | mandatory | |||||||||
column · INTEGER (0..41) · read-only · mandatory The index to outlet control of PduC. | |||||||||||||
| CoutletCtlPduCControl | 1.3.6.1.4.1.42610.1.4.4.1.6.2.3.4.1.2 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The control-type of PduC outlet.
| |||||||||||||
| NpduPwrMonitoringOutletPduD | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4 | ||||||||||||
| SpduPwrMonitoringOutletNumPduD | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.1 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The number of PduD Outlet. | |||||||||||||
| TpduPwrMonitoringOutletStatusTablePduD | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A list to display status of PduD outlet. | |||||||||||||
| RpduPwrMonitoringOutletStatusPduDEntry | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1 | NA | mandatory | ||||||||||
| CoutletPduDIndex | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.1 | INTEGER (0..41) | RO | mandatory | |||||||||
column · INTEGER (0..41) · read-only · mandatory The index to outlet status of PduD. | |||||||||||||
| CoutletPduDState | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.2 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The state of PduD outlet.
| |||||||||||||
| CoutletPduDCurrent | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.3 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The current of PduD outlet.
| |||||||||||||
| CoutletPduDPwrFactor | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.4 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The power factor of PduD outlet.
| |||||||||||||
| CoutletPduDPower | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.5 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The power of PduD outlet.
| |||||||||||||
| CoutletPduDEnergy | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.6 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The energy of PduD outlet.
| |||||||||||||
| CoutletPduDResetFrom | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.7 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The reset date of PduD outlet. | |||||||||||||
| CoutletPduDStatus | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.8 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The status of PduD outlet.
| |||||||||||||
| TpduPwrMonitoringOutletCfgTablePduD | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A list to display configuration of PduD outlet. | |||||||||||||
| RpduPwrMonitoringOutletCfgPduDEntry | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A list to display configuration of PduD outlet.
| |||||||||||||
| CoutletCfgPduDIndex | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.1 | INTEGER (0..41) | RO | mandatory | |||||||||
column · INTEGER (0..41) · read-only · mandatory The index to outlet configuration of PduD. | |||||||||||||
| CoutletCfgPduDName | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.2 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The name for outlet of PduD. | |||||||||||||
| CoutletCfgPduDDelayOnStatus | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.3 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Delay On status of PduD outlet.
| |||||||||||||
| CoutletCfgPduDDelayOnTime | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.4 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Delay On time of PduD outlet.
| |||||||||||||
| CoutletCfgPduDDelayOffStatus | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.5 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Delay Off status of PduD outlet.
| |||||||||||||
| CoutletCfgPduDDelayOffTime | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.6 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Delay Off time of PduD outlet.
| |||||||||||||
| CoutletCfgPduDReboot | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.7 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Delay On reboot duration of PduD outlet.
| |||||||||||||
| CoutletCfgPduDOverCurrCritical | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.8 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Critical Threshold of current of PduD outlet.
| |||||||||||||
| CoutletCfgPduDOverCurrWarning | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.9 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Warning Threshold of current of PduD outlet.
| |||||||||||||
| CoutletCfgPduDOverPwrCritical | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.10 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Critical Threshold of power of PduD outlet.
| |||||||||||||
| CoutletCfgPduDOverPwrWarning | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.11 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The Warning Threshold of power of PduD outlet.
| |||||||||||||
| TpduPwrMonitoringOutletCtlTablePduD | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.4 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A list to display control of PduD outlet. | |||||||||||||
| RpduPwrMonitoringOutletCtlPduDEntry | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.4.1 | NA | mandatory | ||||||||||
| CoutletCtlPduDIndex | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.4.1.1 | INTEGER (0..41) | RO | mandatory | |||||||||
column · INTEGER (0..41) · read-only · mandatory The index to outlet control of PduD. | |||||||||||||
| CoutletCtlPduDControl | 1.3.6.1.4.1.42610.1.4.4.1.6.2.4.4.1.2 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The control-type of PduD outlet.
| |||||||||||||
| NpduEnvMonitoring | 1.3.6.1.4.1.42610.1.4.4.1.7 | ||||||||||||
| NpduEnvMonitoringStatus | 1.3.6.1.4.1.42610.1.4.4.1.7.1 | ||||||||||||
| SpduEnvMonitoringTemp | 1.3.6.1.4.1.42610.1.4.4.1.7.1.1 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The temperature of EMD.
| |||||||||||||
| SpduEnvMonitoringHumi | 1.3.6.1.4.1.42610.1.4.4.1.7.1.2 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The humidity of EMD.
| |||||||||||||
| SpduEnvMonitoringTempAlarm | 1.3.6.1.4.1.42610.1.4.4.1.7.1.3 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The temperature status of EMD.
| |||||||||||||
| SpduEnvMonitoringHumiAlarm | 1.3.6.1.4.1.42610.1.4.4.1.7.1.4 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The humidity status of EMD.
| |||||||||||||
| NpduEnvMonitoringCfg | 1.3.6.1.4.1.42610.1.4.4.1.7.2 | ||||||||||||
| SpduEnvMonitoringControl | 1.3.6.1.4.1.42610.1.4.4.1.7.2.1 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Enable/disable the EMD.
| |||||||||||||
| SpduEnvMonitoringTempHighCritical | 1.3.6.1.4.1.42610.1.4.4.1.7.2.2 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The High Critical Threshold of temperature of EMD.
| |||||||||||||
| SpduEnvMonitoringTempHighWarning | 1.3.6.1.4.1.42610.1.4.4.1.7.2.3 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The High Warning Threshold of temperature of EMD.
| |||||||||||||
| SpduEnvMonitoringTempLowCritical | 1.3.6.1.4.1.42610.1.4.4.1.7.2.4 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The Low Critical Threshold of temperature of EMD.
| |||||||||||||
| SpduEnvMonitoringTempLowWarning | 1.3.6.1.4.1.42610.1.4.4.1.7.2.5 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The Low Warning Threshold of temperature of EMD.
| |||||||||||||
| SpduEnvMonitoringTempHystersis | 1.3.6.1.4.1.42610.1.4.4.1.7.2.6 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The Hystersis of Temperature of EMD.
| |||||||||||||
| SpduEnvMonitoringTempOffset | 1.3.6.1.4.1.42610.1.4.4.1.7.2.7 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The Offset of Temperature of EMD.
| |||||||||||||
| SpduEnvMonitoringHumiHighCritical | 1.3.6.1.4.1.42610.1.4.4.1.7.2.8 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The High Crtitcal Threshold of humidity of EMD.
| |||||||||||||
| SpduEnvMonitoringHumiHighWarning | 1.3.6.1.4.1.42610.1.4.4.1.7.2.9 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The High Warning Threshold of humidity of EMD.
| |||||||||||||
| SpduEnvMonitoringHumiLowCritical | 1.3.6.1.4.1.42610.1.4.4.1.7.2.10 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The Low Crtitcal Threshold of humidity of EMD.
| |||||||||||||
| SpduEnvMonitoringHumiLowWarning | 1.3.6.1.4.1.42610.1.4.4.1.7.2.11 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The Low Warning Threshold of humidity of EMD.
| |||||||||||||
| SpduEnvMonitoringHumiHystersis | 1.3.6.1.4.1.42610.1.4.4.1.7.2.12 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The Hystersis of Humidity of EMD.
| |||||||||||||
| SpduEnvMonitoringHumiOffset | 1.3.6.1.4.1.42610.1.4.4.1.7.2.13 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The Ofset of Humidity of EMD.
| |||||||||||||
| NpduTraps | 1.3.6.1.4.1.42610.1.4.4.2 | ||||||||||||
| !pduSystemColdBoot | 1.3.6.1.4.1.42610.1.4.4.2.0.1 | ||||||||||||
notification Informational: Cold boot. | |||||||||||||
| !pduSystemWarmBoot | 1.3.6.1.4.1.42610.1.4.4.2.0.2 | ||||||||||||
notification Informational: Warm boot. | |||||||||||||
| !pduSystemRestart | 1.3.6.1.4.1.42610.1.4.4.2.0.3 | ||||||||||||
notification Informational: System restart. | |||||||||||||
| !pduResetToDefault | 1.3.6.1.4.1.42610.1.4.4.2.0.4 | ||||||||||||
notification Informational: Parameters reset to default. | |||||||||||||
| !pduFirmUpgrade | 1.3.6.1.4.1.42610.1.4.4.2.0.5 | ||||||||||||
notification Informational: Firmware upgrade. | |||||||||||||
| !pduSystemLogClear | 1.3.6.1.4.1.42610.1.4.4.2.0.6 | ||||||||||||
notification Informational: System log cleared. | |||||||||||||
| !pduEventlogClear | 1.3.6.1.4.1.42610.1.4.4.2.0.7 | ||||||||||||
notification Informational: Event log cleared. | |||||||||||||
| !pduInletHistoryClear | 1.3.6.1.4.1.42610.1.4.4.2.0.8 | ||||||||||||
notification Informational: Inlet history log cleared. | |||||||||||||
| !pduOutletHistoryClear | 1.3.6.1.4.1.42610.1.4.4.2.0.9 | ||||||||||||
notification Informational: Outlet history log cleared. | |||||||||||||
| !pduSystemTimeChangeUser | 1.3.6.1.4.1.42610.1.4.4.2.0.10 | ||||||||||||
notification Informational: Time changed by user. | |||||||||||||
| !pduSystemTimeChangeNtp | 1.3.6.1.4.1.42610.1.4.4.2.0.11 | ||||||||||||
notification Informational: Time synced with NTP server. | |||||||||||||
| !pduSystemTimeChangeRtc | 1.3.6.1.4.1.42610.1.4.4.2.0.12 | ||||||||||||
notification Informational: Time changed by RTC. | |||||||||||||
| !pduMailTestPass | 1.3.6.1.4.1.42610.1.4.4.2.0.13 | ||||||||||||
notification Informational: Test mail pass. | |||||||||||||
| !pduMailTestFail | 1.3.6.1.4.1.42610.1.4.4.2.0.14 | ||||||||||||
notification Informational: Test mail failed. | |||||||||||||
| !pduMailSentPass | 1.3.6.1.4.1.42610.1.4.4.2.0.15 | ||||||||||||
notification Informational: Mail sent successfully. | |||||||||||||
| !pduMailSentFail | 1.3.6.1.4.1.42610.1.4.4.2.0.16 | ||||||||||||
notification Informational: Mail sent failed. | |||||||||||||
| !pduSystemCfgChange | 1.3.6.1.4.1.42610.1.4.4.2.0.17 | ||||||||||||
notification Informational: Parameter changed. | |||||||||||||
| !pduSystemParamImport | 1.3.6.1.4.1.42610.1.4.4.2.0.18 | ||||||||||||
notification Informational: Import XML configuration. | |||||||||||||
| !pduInletCommLost | 1.3.6.1.4.1.42610.1.4.4.2.0.19 | ||||||||||||
notification Informational: Inlet communication lost. | |||||||||||||
| !pduInletCommRestore | 1.3.6.1.4.1.42610.1.4.4.2.0.20 | ||||||||||||
notification Informational: Inlet communication restore. | |||||||||||||
| !pduOutletCommLost | 1.3.6.1.4.1.42610.1.4.4.2.0.21 | ||||||||||||
notification Informational: Outlet communication lost. | |||||||||||||
| !pduOutletCommRestore | 1.3.6.1.4.1.42610.1.4.4.2.0.22 | ||||||||||||
notification Informational: Outlet communication restore | |||||||||||||
| !pduOutletOnUser | 1.3.6.1.4.1.42610.1.4.4.2.0.23 | ||||||||||||
notification Informational: Outlet turned on by user. | |||||||||||||
| !pduOutletOnSchedule | 1.3.6.1.4.1.42610.1.4.4.2.0.24 | ||||||||||||
notification Informational: Outlet turned on by schedule. | |||||||||||||
| !pduOutletOffUser | 1.3.6.1.4.1.42610.1.4.4.2.0.25 | ||||||||||||
notification Informational: Outlet turned off by user. | |||||||||||||
| !pduOutletOffSchedule | 1.3.6.1.4.1.42610.1.4.4.2.0.26 | ||||||||||||
notification Informational: Outlet turned off by schedule. | |||||||||||||
| !pduOutletRebootUser | 1.3.6.1.4.1.42610.1.4.4.2.0.27 | ||||||||||||
notification Informational: Outlet reboot by user. | |||||||||||||
| !pduOutletRebootSchedule | 1.3.6.1.4.1.42610.1.4.4.2.0.28 | ||||||||||||
notification Informational: Outlet reboot by schedule. | |||||||||||||
| !pduInletEnergyReset | 1.3.6.1.4.1.42610.1.4.4.2.0.29 | ||||||||||||
notification Informational: Inlet energy reset. | |||||||||||||
| !pduOutletEnergyReset | 1.3.6.1.4.1.42610.1.4.4.2.0.30 | ||||||||||||
notification Informational: Outlet energy reset. | |||||||||||||
| !pduSetUser | 1.3.6.1.4.1.42610.1.4.4.2.0.31 | ||||||||||||
notification Informational: Assign outlet to user. | |||||||||||||
| !pduDeletUser | 1.3.6.1.4.1.42610.1.4.4.2.0.32 | ||||||||||||
notification Informational: Delete user. | |||||||||||||
| !pduUpgradeInletSuccess | 1.3.6.1.4.1.42610.1.4.4.2.0.33 | ||||||||||||
notification Informational: Inlet upgrade successfully. | |||||||||||||
| !pduUpgradeInletFail | 1.3.6.1.4.1.42610.1.4.4.2.0.34 | ||||||||||||
notification Informational: Inlet upgrade fail. | |||||||||||||
| !pduUpgradeOutletSuccess | 1.3.6.1.4.1.42610.1.4.4.2.0.35 | ||||||||||||
notification Informational: Outlet upgrade successfully. | |||||||||||||
| !pduUpgradeOutletFail | 1.3.6.1.4.1.42610.1.4.4.2.0.36 | ||||||||||||
notification Informational: Outlet upgrade fail. | |||||||||||||
| !pduEmdTempHighWarnToNormal | 1.3.6.1.4.1.42610.1.4.4.2.0.101 | ||||||||||||
notification Informational: Temperature had returned from high warning to normal. | |||||||||||||
| !pduEmdTempHighWarn | 1.3.6.1.4.1.42610.1.4.4.2.0.102 | ||||||||||||
notification Warning: Temperature was higher than high warning set point. | |||||||||||||
| !pduEmdTempLowWarnToNormal | 1.3.6.1.4.1.42610.1.4.4.2.0.103 | ||||||||||||
notification Informational: Temperature had returned from low warning to normal. | |||||||||||||
| !pduEmdTempLowWarn | 1.3.6.1.4.1.42610.1.4.4.2.0.104 | ||||||||||||
notification Warning: Temperature was lower than low warning set point. | |||||||||||||
| !pduEmdTempHighCritToWarn | 1.3.6.1.4.1.42610.1.4.4.2.0.105 | ||||||||||||
notification Informational: Temperature had returned from high critical to high warning. | |||||||||||||
| !pduEmdTempHighCritical | 1.3.6.1.4.1.42610.1.4.4.2.0.106 | ||||||||||||
notification Critical: Temperature was higher than high critical set point. | |||||||||||||
| !pduEmdTempLowCritToWarn | 1.3.6.1.4.1.42610.1.4.4.2.0.107 | ||||||||||||
notification Informational: Temperature had returned from low critical to low warning. | |||||||||||||
| !pduEmdTempLowCritical | 1.3.6.1.4.1.42610.1.4.4.2.0.108 | ||||||||||||
notification Critical: Temperature was lower than low critical set point. | |||||||||||||
| !pduEmdHumiHighWarnToNormal | 1.3.6.1.4.1.42610.1.4.4.2.0.109 | ||||||||||||
notification Informational: Humidity had returned from high warning to normal. | |||||||||||||
| !pduEmdHumiHighWarn | 1.3.6.1.4.1.42610.1.4.4.2.0.110 | ||||||||||||
notification Warning: Humidity was higher than high warning set point. | |||||||||||||
| !pduEmdHumiLowWarnToNormal | 1.3.6.1.4.1.42610.1.4.4.2.0.111 | ||||||||||||
notification Informational: Humidity had returned from low warning to normal. | |||||||||||||
| !pduEmdHumiLowWarn | 1.3.6.1.4.1.42610.1.4.4.2.0.112 | ||||||||||||
notification Warning: Humidity was lower than low warning set point. | |||||||||||||
| !pduEmdHumiHighCritToWarn | 1.3.6.1.4.1.42610.1.4.4.2.0.113 | ||||||||||||
notification Informational: Humidity had returned from high critical to high warning. | |||||||||||||
| !pduEmdHumiHighCritical | 1.3.6.1.4.1.42610.1.4.4.2.0.114 | ||||||||||||
notification Critical: Humidity was higher than high critical set point. | |||||||||||||
| !pduEmdHumiLowCritToWarn | 1.3.6.1.4.1.42610.1.4.4.2.0.115 | ||||||||||||
notification Informational: Humidity had returned from low critical to low warning. | |||||||||||||
| !pduEmdHumiLowCritical | 1.3.6.1.4.1.42610.1.4.4.2.0.116 | ||||||||||||
notification Critical: Humidity was lower than low critical set point. | |||||||||||||
| !pduEmdAlarm1NotActive | 1.3.6.1.4.1.42610.1.4.4.2.0.117 | ||||||||||||
notification Informational: Alarm-1 became inactive. | |||||||||||||
| !pduEmdAlarm1Active | 1.3.6.1.4.1.42610.1.4.4.2.0.118 | ||||||||||||
notification Warning: Alarm-1 became active. | |||||||||||||
| !pduEmdAlarm2NotActive | 1.3.6.1.4.1.42610.1.4.4.2.0.119 | ||||||||||||
notification Informational: Alarm-2 became inactive. | |||||||||||||
| !pduEmdAlarm2Active | 1.3.6.1.4.1.42610.1.4.4.2.0.120 | ||||||||||||
notification Warning: Alarm-2 became active. | |||||||||||||
| !pduRs485Online | 1.3.6.1.4.1.42610.1.4.4.2.0.121 | ||||||||||||
notification Informational: RS485 Sensor was online. | |||||||||||||
| !pduRs485Offline | 1.3.6.1.4.1.42610.1.4.4.2.0.122 | ||||||||||||
notification Warning: RS485 Sensor was offline. | |||||||||||||
| !pduInletLoadCritToWarn | 1.3.6.1.4.1.42610.1.4.4.2.0.123 | ||||||||||||
notification Informational: Inlet load had returned from critical to warning. | |||||||||||||
| !pduInletLoadCritical | 1.3.6.1.4.1.42610.1.4.4.2.0.124 | ||||||||||||
notification Critical: Inlet load was higher than critical set point. | |||||||||||||
| !pduInletLoadWarnToNormal | 1.3.6.1.4.1.42610.1.4.4.2.0.125 | ||||||||||||
notification Informational: Inlet load had returned from warning to normal. | |||||||||||||
| !pduInletLoadWarn | 1.3.6.1.4.1.42610.1.4.4.2.0.126 | ||||||||||||
notification Warning: Inlet load was higher than warning set point. | |||||||||||||
| !pduInletCurrPhase1CritToWarn | 1.3.6.1.4.1.42610.1.4.4.2.0.127 | ||||||||||||
notification Informational: Inlet phase1 current had returned from critical to warning. | |||||||||||||
| !pduInletCurrPhase1Critical | 1.3.6.1.4.1.42610.1.4.4.2.0.128 | ||||||||||||
notification Critical: Inlet phase1 current was higher than critical set point. | |||||||||||||
| !pduInletCurrPhase1WarnToNormal | 1.3.6.1.4.1.42610.1.4.4.2.0.129 | ||||||||||||
notification Informational: Inlet phase1 current had returned from warning to normal. | |||||||||||||
| !pduInletCurrPhase1Warn | 1.3.6.1.4.1.42610.1.4.4.2.0.130 | ||||||||||||
notification Warning: Inlet phase1 current was higher than warning set point. | |||||||||||||
| !pduInletCurrPhase2CritToWarn | 1.3.6.1.4.1.42610.1.4.4.2.0.131 | ||||||||||||
notification Informational: Inlet phase2 current had returned from critical to warning. | |||||||||||||
| !pduInletCurrPhase2Critical | 1.3.6.1.4.1.42610.1.4.4.2.0.132 | ||||||||||||
notification Critical: Inlet phase2 current was higher than critical set point. | |||||||||||||
| !pduInletCurrPhase2WarnToNormal | 1.3.6.1.4.1.42610.1.4.4.2.0.133 | ||||||||||||
notification Informational: Inlet phase2 current had returned from warning to normal. | |||||||||||||
| !pduInletCurrPhase2Warn | 1.3.6.1.4.1.42610.1.4.4.2.0.134 | ||||||||||||
notification Warning: Inlet phase2 current was higher than warning set point. | |||||||||||||
| !pduInletCurrPhase3CritToWarn | 1.3.6.1.4.1.42610.1.4.4.2.0.135 | ||||||||||||
notification Informational: Inlet phase3 current had returned from critical to warning. | |||||||||||||
| !pduInletCurrPhase3Critical | 1.3.6.1.4.1.42610.1.4.4.2.0.136 | ||||||||||||
notification Critical: Inlet phase3 current was higher than critical set point. | |||||||||||||
| !pduInletCurrPhase3WarnToNormal | 1.3.6.1.4.1.42610.1.4.4.2.0.137 | ||||||||||||
notification Informational: Inlet phase3 current had returned from warning to normal. | |||||||||||||
| !pduInletCurrPhase3Warn | 1.3.6.1.4.1.42610.1.4.4.2.0.138 | ||||||||||||
notification Warning: Inlet phase3 current had returned from critical to warning. | |||||||||||||
| !pduInletVoltPhase1CritToWarn | 1.3.6.1.4.1.42610.1.4.4.2.0.139 | ||||||||||||
notification Informational: Inlet phase1 voltage had returned from critical to warning. | |||||||||||||
| !pduInletVoltPhase1Critical | 1.3.6.1.4.1.42610.1.4.4.2.0.140 | ||||||||||||
notification Critical: Inlet phase1 voltage was higher than critical set point. | |||||||||||||
| !pduInletVoltPhase1WarnToNormal | 1.3.6.1.4.1.42610.1.4.4.2.0.141 | ||||||||||||
notification Informational: Inlet phase1 voltage had returned from warning to normal. | |||||||||||||
| !pduInletVoltPhase1Warn | 1.3.6.1.4.1.42610.1.4.4.2.0.142 | ||||||||||||
notification Warning: Inlet phase1 voltage was higher than warning set point. | |||||||||||||
| !pduInletVoltPhase2CritToWarn | 1.3.6.1.4.1.42610.1.4.4.2.0.143 | ||||||||||||
notification Informational: Inlet phase2 voltage had returned from critical to warning. | |||||||||||||
| !pduInletVoltPhase2Critical | 1.3.6.1.4.1.42610.1.4.4.2.0.144 | ||||||||||||
notification Critical: Inlet phase2 voltage was higher than critical set point. | |||||||||||||
| !pduInletVoltPhase2WarnToNormal | 1.3.6.1.4.1.42610.1.4.4.2.0.145 | ||||||||||||
notification Informational: Inlet phase2 voltage had returned from warning to normal. | |||||||||||||
| !pduInletVoltPhase2Warn | 1.3.6.1.4.1.42610.1.4.4.2.0.146 | ||||||||||||
notification Warning: Inlet phase2 voltage was higher than warning set point. | |||||||||||||
| !pduInletVoltPhase3CritToWarn | 1.3.6.1.4.1.42610.1.4.4.2.0.147 | ||||||||||||
notification Informational: Inlet phase3 voltage had returned from critical to warning. | |||||||||||||
| !pduInletVoltPhase3Critical | 1.3.6.1.4.1.42610.1.4.4.2.0.148 | ||||||||||||
notification Critical: Inlet phase3 voltage was higher than critical set point. | |||||||||||||
| !pduInletVoltPhase3WarnToNormal | 1.3.6.1.4.1.42610.1.4.4.2.0.149 | ||||||||||||
notification Informational: Inlet phase3 voltage had returned from warning to normal. | |||||||||||||
| !pduInletVoltPhase3Warn | 1.3.6.1.4.1.42610.1.4.4.2.0.150 | ||||||||||||
notification Warning: Inlet phase3 voltage was higher than warning set point. | |||||||||||||
| !pduOutletCurrCritToWarn | 1.3.6.1.4.1.42610.1.4.4.2.0.151 | ||||||||||||
notification Informational: Outlet current had returned from critical to warning. | |||||||||||||
| !pduOutletCurrCritical | 1.3.6.1.4.1.42610.1.4.4.2.0.152 | ||||||||||||
notification Critical: Outlet current was higher than critical set point. | |||||||||||||
| !pduOutletCurrWarnToNormal | 1.3.6.1.4.1.42610.1.4.4.2.0.153 | ||||||||||||
notification Informational: Outlet current had returned from warning to normal. | |||||||||||||
| !pduOutletCurrWarn | 1.3.6.1.4.1.42610.1.4.4.2.0.154 | ||||||||||||
notification Warning: Outlet current was higher than warning set point. | |||||||||||||
| !pduOutletPwrCritTOWarn | 1.3.6.1.4.1.42610.1.4.4.2.0.155 | ||||||||||||
notification Informational: Outlet power had returned from critical to warning. | |||||||||||||
| !pduOutletPwrCritical | 1.3.6.1.4.1.42610.1.4.4.2.0.156 | ||||||||||||
notification Critical: Outlet power was higher than critical set point. | |||||||||||||
| !pduOutletPwrWarnToNormal | 1.3.6.1.4.1.42610.1.4.4.2.0.157 | ||||||||||||
notification Informational: Outlet power had returned from warning to normal. | |||||||||||||
| !pduOutletPwrWarn | 1.3.6.1.4.1.42610.1.4.4.2.0.158 | ||||||||||||
notification Warning: Outlet power was higher than warning set point. | |||||||||||||
| !pduAlarm1Disabled | 1.3.6.1.4.1.42610.1.4.4.2.0.159 | ||||||||||||
notification Informational: Alarm-1 became disabled. | |||||||||||||
| !pduAlarm2Disabled | 1.3.6.1.4.1.42610.1.4.4.2.0.160 | ||||||||||||
notification Informational: Alarm-2 became disabled. | |||||||||||||
Traps / Notifications
- pduAlarm1Disabled
1.3.6.1.4.1.42610.1.4.4.2.0.159 - pduAlarm2Disabled
1.3.6.1.4.1.42610.1.4.4.2.0.160 - pduDeletUser
1.3.6.1.4.1.42610.1.4.4.2.0.32 - pduEmdAlarm1Active
1.3.6.1.4.1.42610.1.4.4.2.0.118 - pduEmdAlarm1NotActive
1.3.6.1.4.1.42610.1.4.4.2.0.117 - pduEmdAlarm2Active
1.3.6.1.4.1.42610.1.4.4.2.0.120 - pduEmdAlarm2NotActive
1.3.6.1.4.1.42610.1.4.4.2.0.119 - pduEmdHumiHighCritToWarn
1.3.6.1.4.1.42610.1.4.4.2.0.113 - pduEmdHumiHighCritical
1.3.6.1.4.1.42610.1.4.4.2.0.114 - pduEmdHumiHighWarn
1.3.6.1.4.1.42610.1.4.4.2.0.110 - pduEmdHumiHighWarnToNormal
1.3.6.1.4.1.42610.1.4.4.2.0.109 - pduEmdHumiLowCritToWarn
1.3.6.1.4.1.42610.1.4.4.2.0.115 - pduEmdHumiLowCritical
1.3.6.1.4.1.42610.1.4.4.2.0.116 - pduEmdHumiLowWarn
1.3.6.1.4.1.42610.1.4.4.2.0.112 - pduEmdHumiLowWarnToNormal
1.3.6.1.4.1.42610.1.4.4.2.0.111 - pduEmdTempHighCritToWarn
1.3.6.1.4.1.42610.1.4.4.2.0.105 - pduEmdTempHighCritical
1.3.6.1.4.1.42610.1.4.4.2.0.106 - pduEmdTempHighWarn
1.3.6.1.4.1.42610.1.4.4.2.0.102 - pduEmdTempHighWarnToNormal
1.3.6.1.4.1.42610.1.4.4.2.0.101 - pduEmdTempLowCritToWarn
1.3.6.1.4.1.42610.1.4.4.2.0.107 - pduEmdTempLowCritical
1.3.6.1.4.1.42610.1.4.4.2.0.108 - pduEmdTempLowWarn
1.3.6.1.4.1.42610.1.4.4.2.0.104 - pduEmdTempLowWarnToNormal
1.3.6.1.4.1.42610.1.4.4.2.0.103 - pduEventlogClear
1.3.6.1.4.1.42610.1.4.4.2.0.7 - pduFirmUpgrade
1.3.6.1.4.1.42610.1.4.4.2.0.5 - pduInletCommLost
1.3.6.1.4.1.42610.1.4.4.2.0.19 - pduInletCommRestore
1.3.6.1.4.1.42610.1.4.4.2.0.20 - pduInletCurrPhase1CritToWarn
1.3.6.1.4.1.42610.1.4.4.2.0.127 - pduInletCurrPhase1Critical
1.3.6.1.4.1.42610.1.4.4.2.0.128 - pduInletCurrPhase1Warn
1.3.6.1.4.1.42610.1.4.4.2.0.130 - pduInletCurrPhase1WarnToNormal
1.3.6.1.4.1.42610.1.4.4.2.0.129 - pduInletCurrPhase2CritToWarn
1.3.6.1.4.1.42610.1.4.4.2.0.131 - pduInletCurrPhase2Critical
1.3.6.1.4.1.42610.1.4.4.2.0.132 - pduInletCurrPhase2Warn
1.3.6.1.4.1.42610.1.4.4.2.0.134 - pduInletCurrPhase2WarnToNormal
1.3.6.1.4.1.42610.1.4.4.2.0.133 - pduInletCurrPhase3CritToWarn
1.3.6.1.4.1.42610.1.4.4.2.0.135 - pduInletCurrPhase3Critical
1.3.6.1.4.1.42610.1.4.4.2.0.136 - pduInletCurrPhase3Warn
1.3.6.1.4.1.42610.1.4.4.2.0.138 - pduInletCurrPhase3WarnToNormal
1.3.6.1.4.1.42610.1.4.4.2.0.137 - pduInletEnergyReset
1.3.6.1.4.1.42610.1.4.4.2.0.29 - pduInletHistoryClear
1.3.6.1.4.1.42610.1.4.4.2.0.8 - pduInletLoadCritToWarn
1.3.6.1.4.1.42610.1.4.4.2.0.123 - pduInletLoadCritical
1.3.6.1.4.1.42610.1.4.4.2.0.124 - pduInletLoadWarn
1.3.6.1.4.1.42610.1.4.4.2.0.126 - pduInletLoadWarnToNormal
1.3.6.1.4.1.42610.1.4.4.2.0.125 - pduInletVoltPhase1CritToWarn
1.3.6.1.4.1.42610.1.4.4.2.0.139 - pduInletVoltPhase1Critical
1.3.6.1.4.1.42610.1.4.4.2.0.140 - pduInletVoltPhase1Warn
1.3.6.1.4.1.42610.1.4.4.2.0.142 - pduInletVoltPhase1WarnToNormal
1.3.6.1.4.1.42610.1.4.4.2.0.141 - pduInletVoltPhase2CritToWarn
1.3.6.1.4.1.42610.1.4.4.2.0.143 - pduInletVoltPhase2Critical
1.3.6.1.4.1.42610.1.4.4.2.0.144 - pduInletVoltPhase2Warn
1.3.6.1.4.1.42610.1.4.4.2.0.146 - pduInletVoltPhase2WarnToNormal
1.3.6.1.4.1.42610.1.4.4.2.0.145 - pduInletVoltPhase3CritToWarn
1.3.6.1.4.1.42610.1.4.4.2.0.147 - pduInletVoltPhase3Critical
1.3.6.1.4.1.42610.1.4.4.2.0.148 - pduInletVoltPhase3Warn
1.3.6.1.4.1.42610.1.4.4.2.0.150 - pduInletVoltPhase3WarnToNormal
1.3.6.1.4.1.42610.1.4.4.2.0.149 - pduMailSentFail
1.3.6.1.4.1.42610.1.4.4.2.0.16 - pduMailSentPass
1.3.6.1.4.1.42610.1.4.4.2.0.15 - pduMailTestFail
1.3.6.1.4.1.42610.1.4.4.2.0.14 - pduMailTestPass
1.3.6.1.4.1.42610.1.4.4.2.0.13 - pduOutletCommLost
1.3.6.1.4.1.42610.1.4.4.2.0.21 - pduOutletCommRestore
1.3.6.1.4.1.42610.1.4.4.2.0.22 - pduOutletCurrCritToWarn
1.3.6.1.4.1.42610.1.4.4.2.0.151 - pduOutletCurrCritical
1.3.6.1.4.1.42610.1.4.4.2.0.152 - pduOutletCurrWarn
1.3.6.1.4.1.42610.1.4.4.2.0.154 - pduOutletCurrWarnToNormal
1.3.6.1.4.1.42610.1.4.4.2.0.153 - pduOutletEnergyReset
1.3.6.1.4.1.42610.1.4.4.2.0.30 - pduOutletHistoryClear
1.3.6.1.4.1.42610.1.4.4.2.0.9 - pduOutletOffSchedule
1.3.6.1.4.1.42610.1.4.4.2.0.26 - pduOutletOffUser
1.3.6.1.4.1.42610.1.4.4.2.0.25 - pduOutletOnSchedule
1.3.6.1.4.1.42610.1.4.4.2.0.24 - pduOutletOnUser
1.3.6.1.4.1.42610.1.4.4.2.0.23 - pduOutletPwrCritTOWarn
1.3.6.1.4.1.42610.1.4.4.2.0.155 - pduOutletPwrCritical
1.3.6.1.4.1.42610.1.4.4.2.0.156 - pduOutletPwrWarn
1.3.6.1.4.1.42610.1.4.4.2.0.158 - pduOutletPwrWarnToNormal
1.3.6.1.4.1.42610.1.4.4.2.0.157 - pduOutletRebootSchedule
1.3.6.1.4.1.42610.1.4.4.2.0.28 - pduOutletRebootUser
1.3.6.1.4.1.42610.1.4.4.2.0.27 - pduResetToDefault
1.3.6.1.4.1.42610.1.4.4.2.0.4 - pduRs485Offline
1.3.6.1.4.1.42610.1.4.4.2.0.122 - pduRs485Online
1.3.6.1.4.1.42610.1.4.4.2.0.121 - pduSetUser
1.3.6.1.4.1.42610.1.4.4.2.0.31 - pduSystemCfgChange
1.3.6.1.4.1.42610.1.4.4.2.0.17 - pduSystemColdBoot
1.3.6.1.4.1.42610.1.4.4.2.0.1 - pduSystemLogClear
1.3.6.1.4.1.42610.1.4.4.2.0.6 - pduSystemParamImport
1.3.6.1.4.1.42610.1.4.4.2.0.18 - pduSystemRestart
1.3.6.1.4.1.42610.1.4.4.2.0.3 - pduSystemTimeChangeNtp
1.3.6.1.4.1.42610.1.4.4.2.0.11 - pduSystemTimeChangeRtc
1.3.6.1.4.1.42610.1.4.4.2.0.12 - pduSystemTimeChangeUser
1.3.6.1.4.1.42610.1.4.4.2.0.10 - pduSystemWarmBoot
1.3.6.1.4.1.42610.1.4.4.2.0.2 - pduUpgradeInletFail
1.3.6.1.4.1.42610.1.4.4.2.0.34 - pduUpgradeInletSuccess
1.3.6.1.4.1.42610.1.4.4.2.0.33 - pduUpgradeOutletFail
1.3.6.1.4.1.42610.1.4.4.2.0.36 - pduUpgradeOutletSuccess
1.3.6.1.4.1.42610.1.4.4.2.0.35