BKTEL-HFC862-OVTX-V11-MIB
HUBER+SUHNER BKtel GmbH (HFC)snmptranslate -m BKTEL-HFC862-OVTX-V11-MIB -Tpsnmpwalk -v2c -c <community> -m BKTEL-HFC862-OVTX-V11-MIB <host> 1.3.6.1.4.1.7501.1.2.101Imports
| BKTEL-HFC862-BASE-MIB | DisplayString, ModuleWidthValue, NESlotValue, PerceivedSeverityValue, TruthValue, modules |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, Unsigned32, enterprises, experimental, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Novtx | 1.3.6.1.4.1.7501.1.2.101 | |||
| NovtxCommon | 1.3.6.1.4.1.7501.1.2.101.1 | |||
| SovtxCommonNumberOfModules | 1.3.6.1.4.1.7501.1.2.101.1.1 | INTEGER (0..50) | RO | mandatory |
scalar · INTEGER (0..50) · read-only · mandatory Number of modules in table. | ||||
| TovtxCommonTable | 1.3.6.1.4.1.7501.1.2.101.1.2 | NA | mandatory | |
table · not-accessible · mandatory The table contains all modules of the OVTX-type in the NE | ||||
| RovtxCommonEntry | 1.3.6.1.4.1.7501.1.2.101.1.2.1 | NA | mandatory | |
| CovtxNESlot | 1.3.6.1.4.1.7501.1.2.101.1.2.1.1 | NESlotValue | RO | mandatory |
column · NESlotValue · read-only · mandatory The slot number of the chassis for which this entry contains management information. Equal to: modOVTXv11UniqueID | ||||
| CovtxCommonType | 1.3.6.1.4.1.7501.1.2.101.1.2.1.2 | DisplayString (SIZE (0..32)) | RO | mandatory |
column · DisplayString (SIZE (0..32)) · read-only · mandatory The type of physical module. modSlotEmpty indicates an empty slot. A Value of modSlotUnknown indicates that the type of module is unknown. | ||||
| CovtxCommonDescr | 1.3.6.1.4.1.7501.1.2.101.1.2.1.3 | DisplayString | RW | mandatory |
column · DisplayString · read-write · mandatory A textual description of the module. If not available, this Value should be set to a zero length string. | ||||
| CovtxCommonFirmwareId | 1.3.6.1.4.1.7501.1.2.101.1.2.1.4 | DisplayString (SIZE (0..32)) | RO | mandatory |
column · DisplayString (SIZE (0..32)) · read-only · mandatory The firmware Id of the module. | ||||
| CovtxCommonModuleWidth | 1.3.6.1.4.1.7501.1.2.101.1.2.1.5 | ModuleWidthValue | RO | optional |
column · ModuleWidthValue · read-only · optional The width of the module in multiples of slots (1, 2, ...) | ||||
| NovtxStates | 1.3.6.1.4.1.7501.1.2.101.2 | |||
| TovtxStatesTable | 1.3.6.1.4.1.7501.1.2.101.2.1 | NA | mandatory | |
| RovtxStatesEntry | 1.3.6.1.4.1.7501.1.2.101.2.1.1 | NA | mandatory | |
| CovtxStatesOutputLow | 1.3.6.1.4.1.7501.1.2.101.2.1.1.1 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory Optical output power low | ||||
| CovtxStatesOutputHigh | 1.3.6.1.4.1.7501.1.2.101.2.1.1.2 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory Optical output power high | ||||
| CovtxStatesInputLow | 1.3.6.1.4.1.7501.1.2.101.2.1.1.3 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory RF input power low (CATV input) | ||||
| CovtxStatesLaserAging | 1.3.6.1.4.1.7501.1.2.101.2.1.1.4 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory The laser is aging | ||||
| CovtxStatesTecHigh | 1.3.6.1.4.1.7501.1.2.101.2.1.1.5 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory Laser cooler limit reached | ||||
| CovtxStatesLaserTempLow | 1.3.6.1.4.1.7501.1.2.101.2.1.1.6 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory Laser temperature low | ||||
| CovtxStatesLaserTempHigh | 1.3.6.1.4.1.7501.1.2.101.2.1.1.7 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory Laser temperature high | ||||
| CovtxStatesOmiOrRfgainLow | 1.3.6.1.4.1.7501.1.2.101.2.1.1.8 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory Omi or rf-gain (depending on mode) low (CATV input) | ||||
| CovtxStatesOmiOrRfgainHigh | 1.3.6.1.4.1.7501.1.2.101.2.1.1.9 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory Omi or rf-gain (depending on mode) high (CATV input) | ||||
| CovtxStatesPowerSupplyLeft | 1.3.6.1.4.1.7501.1.2.101.2.1.1.10 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory The left (looking from front) power supply unit fails | ||||
| CovtxStatesPowerSupplyRight | 1.3.6.1.4.1.7501.1.2.101.2.1.1.11 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory The right (looking from front) power supply unit fails | ||||
| CovtxStatesFanLeft | 1.3.6.1.4.1.7501.1.2.101.2.1.1.12 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory The left (looking from front) fan unit fails | ||||
| CovtxStatesFanRight | 1.3.6.1.4.1.7501.1.2.101.2.1.1.13 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory The right (looking from front) fan unit fails | ||||
| CovtxStatesTemperatureLow | 1.3.6.1.4.1.7501.1.2.101.2.1.1.14 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory Device internal temperature low | ||||
| CovtxStatesTemperatureHigh | 1.3.6.1.4.1.7501.1.2.101.2.1.1.15 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory Device internal temperature high | ||||
| CovtxStatesPlus3p3VLow | 1.3.6.1.4.1.7501.1.2.101.2.1.1.16 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory 3.3 Volt supply low | ||||
| CovtxStatesPlus3p3VHigh | 1.3.6.1.4.1.7501.1.2.101.2.1.1.17 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory 3.3 Volt supply high | ||||
| CovtxStatesPlus5VLow | 1.3.6.1.4.1.7501.1.2.101.2.1.1.18 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory 5 Volt supply low | ||||
| CovtxStatesPlus5VHigh | 1.3.6.1.4.1.7501.1.2.101.2.1.1.19 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory 5 Volt supply high | ||||
| CovtxStatesPlus12VLow | 1.3.6.1.4.1.7501.1.2.101.2.1.1.20 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory 12 Volt supply low | ||||
| CovtxStatesPlus12VHigh | 1.3.6.1.4.1.7501.1.2.101.2.1.1.21 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory 12 Volt supply high | ||||
| CovtxStatesPlus24VLow | 1.3.6.1.4.1.7501.1.2.101.2.1.1.22 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory 24 Volt supply low | ||||
| CovtxStatesPlus24VHigh | 1.3.6.1.4.1.7501.1.2.101.2.1.1.23 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory 24 Volt supply high | ||||
| CovtxStatesMinus5VLow | 1.3.6.1.4.1.7501.1.2.101.2.1.1.24 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory -5 Volt supply low | ||||
| CovtxStatesMinus5VHigh | 1.3.6.1.4.1.7501.1.2.101.2.1.1.25 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory -5 Volt supply high | ||||
| CovtxStatesMinus12VLow | 1.3.6.1.4.1.7501.1.2.101.2.1.1.26 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory -12 Volt supply low | ||||
| CovtxStatesMinus12VHigh | 1.3.6.1.4.1.7501.1.2.101.2.1.1.27 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory -12 Volt supply high | ||||
| CovtxStatesLaserShutdown | 1.3.6.1.4.1.7501.1.2.101.2.1.1.28 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory Laser is shutdown, no optical output | ||||
| CovtxStatesInitializing | 1.3.6.1.4.1.7501.1.2.101.2.1.1.29 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory The device is initializing | ||||
| CovtxStatesBootloader | 1.3.6.1.4.1.7501.1.2.101.2.1.1.30 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory The device is running in bootloader mode without a legal application software. | ||||
| CovtxStatesCommLoss | 1.3.6.1.4.1.7501.1.2.101.2.1.1.31 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory The NEC has lost the connection to the device. Reason may be a removed or defective device. Note that this state is set by the NEC and not by the device | ||||
| CovtxStatesInputHigh | 1.3.6.1.4.1.7501.1.2.101.2.1.1.32 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory RF input power high (CATV input) | ||||
| CovtxStatesRedundancySwitch | 1.3.6.1.4.1.7501.1.2.101.2.1.1.33 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory This (redundant) device has been activated (redundancy switchover) | ||||
| CovtxStatesSatInputLow | 1.3.6.1.4.1.7501.1.2.101.2.1.1.34 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory RF input power low (SAT input) Only used if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports clear(5). | ||||
| CovtxStatesSatInputHigh | 1.3.6.1.4.1.7501.1.2.101.2.1.1.35 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory RF input power high (SAT input) Only used if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports clear(5). | ||||
| CovtxStatesSatOmiOrRfgainLow | 1.3.6.1.4.1.7501.1.2.101.2.1.1.36 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory Omi or rf-gain (depending on mode) low (SAT input) Only used if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports clear(5). | ||||
| CovtxStatesSatOmiOrRfgainHigh | 1.3.6.1.4.1.7501.1.2.101.2.1.1.37 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory Omi or rf-gain (depending on mode) high (SAT input) Only used if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports clear(5). | ||||
| CovtxStatesSatLnbShortCircuit | 1.3.6.1.4.1.7501.1.2.101.2.1.1.38 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory Short-circuit at SAT LNB Only used if ovtxDisplaySatLnbSupplySupported != notSupported(1), otherwise always reports clear(5). | ||||
| CovtxStatesSbs1Level | 1.3.6.1.4.1.7501.1.2.101.2.1.1.39 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory SBS #1 level alarm Only used if ovtxDisplaySbsExtensionsSupported == true(1), otherwise always reports clear(5). | ||||
| CovtxStatesSbs2Level | 1.3.6.1.4.1.7501.1.2.101.2.1.1.40 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory SBS #2 level alarm Only used if ovtxDisplaySbsExtensionsSupported == true(1), otherwise always reports clear(5). | ||||
| CovtxStatesSbs1PllNotLocked | 1.3.6.1.4.1.7501.1.2.101.2.1.1.41 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory SBS #1 PLL not locked Only used if ovtxDisplaySbsExtensionsSupported == true(1), otherwise always reports clear(5). | ||||
| CovtxStatesSbs2PllNotLocked | 1.3.6.1.4.1.7501.1.2.101.2.1.1.42 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory SBS #2 PLL not locked Only used if ovtxDisplaySbsExtensionsSupported == true(1), otherwise always reports clear(5). | ||||
| CovtxStatesInternalAlarm | 1.3.6.1.4.1.7501.1.2.101.2.1.1.43 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory Internal hardware failure | ||||
| NovtxConfiguration | 1.3.6.1.4.1.7501.1.2.101.3 | |||
| TovtxConfigurationTable | 1.3.6.1.4.1.7501.1.2.101.3.1 | NA | mandatory | |
| RovtxConfigurationEntry | 1.3.6.1.4.1.7501.1.2.101.3.1.1 | NA | mandatory | |
row · not-accessible · mandatory
| ||||
| CovtxConfigurationNESlotWrite | 1.3.6.1.4.1.7501.1.2.101.3.1.1.1 | NESlotWriteValue | RW | optional |
column · NESlotWriteValue · read-write · optional By writing this variable a slot can be assigned for devices that dont support hardware slot detection. Reading '-1' means that the slot position is NOT writable. | ||||
| CovtxConfigurationModeAGC | 1.3.6.1.4.1.7501.1.2.101.3.1.1.2 | AGCmode | RW | mandatory |
column · AGCmode · read-write · mandatory The AGC mode of the optical transmitter (CATV input). | ||||
| CovtxConfigurationOmi | 1.3.6.1.4.1.7501.1.2.101.3.1.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The desired offset from nominal OMI in 0.1dB units (CATV input). This parameter is only used if AGC is on. | ||||
| CovtxConfigurationRfGain | 1.3.6.1.4.1.7501.1.2.101.3.1.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The desired offset from nominal gain in 0.1dB units (CATV input). This parameter is only used if AGC is off. | ||||
| CovtxConfigurationSbsSuppression | 1.3.6.1.4.1.7501.1.2.101.3.1.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The sbs suppression in 0.1dBm units. | ||||
| CovtxConfigurationChannelDistance | 1.3.6.1.4.1.7501.1.2.101.3.1.1.6 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The channel raster in MHz units. | ||||
| CovtxConfigurationLaserFrequency | 1.3.6.1.4.1.7501.1.2.101.3.1.1.7 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The laser frequency in GHz units. | ||||
| CovtxConfigurationRfInputLimitLoLo | 1.3.6.1.4.1.7501.1.2.101.3.1.1.8 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The rf input power low alarm limit in 0.1 dBm units | ||||
| CovtxConfigurationRfInputLimitLo | 1.3.6.1.4.1.7501.1.2.101.3.1.1.9 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The rf input power low warning limit in 0.1 dBm units | ||||
| CovtxConfigurationRfInputLimitHi | 1.3.6.1.4.1.7501.1.2.101.3.1.1.10 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The rf input power high warning limit in 0.1 dBm units | ||||
| CovtxConfigurationRfInputLimitHiHi | 1.3.6.1.4.1.7501.1.2.101.3.1.1.11 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The rf input power high alarm limit in 0.1 dBm units | ||||
| CovtxConfigurationRfGainMeasuredLimitLoLo | 1.3.6.1.4.1.7501.1.2.101.3.1.1.12 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The Measured-Rf-Gain offset low alarm limit in 0.1 dB units (in AGC ON mode) | ||||
| CovtxConfigurationRfGainMeasuredLimitLo | 1.3.6.1.4.1.7501.1.2.101.3.1.1.13 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The Measured-Rf-Gain offset low warning limit in 0.1 dB units (in AGC ON mode) | ||||
| CovtxConfigurationRfGainMeasuredLimitHi | 1.3.6.1.4.1.7501.1.2.101.3.1.1.14 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The Measured-Rf-Gain offset high warning limit in 0.1 dB units (in AGC ON mode) | ||||
| CovtxConfigurationRfGainMeasuredLimitHiHi | 1.3.6.1.4.1.7501.1.2.101.3.1.1.15 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The Measured-Rf-Gain offset high alarm limit in 0.1 dB units (in AGC ON mode) | ||||
| CovtxConfigurationOmiMeasuredLimitLoLo | 1.3.6.1.4.1.7501.1.2.101.3.1.1.16 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The Measured-OMI offset low alarm limit in 0.1 dB units (in AGC OFF mode) | ||||
| CovtxConfigurationOmiMeasuredLimitLo | 1.3.6.1.4.1.7501.1.2.101.3.1.1.17 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The Measured-OMI offset low warning limit in 0.1 dB units(in AGC OFF mode) | ||||
| CovtxConfigurationOmiMeasuredLimitHi | 1.3.6.1.4.1.7501.1.2.101.3.1.1.18 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The Measured-OMI offset high warning limit in 0.1 dB units(in AGC OFF mode) | ||||
| CovtxConfigurationOmiMeasuredLimitHiHi | 1.3.6.1.4.1.7501.1.2.101.3.1.1.19 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The Measured-OMI offset high alarm limit in 0.1 dB units(in AGC OFF mode) | ||||
| CovtxConfigurationOutputPwrLimitLoLo | 1.3.6.1.4.1.7501.1.2.101.3.1.1.20 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The output power low alarm limit in 0.1 dBm units | ||||
| CovtxConfigurationOutputPwrLimitLo | 1.3.6.1.4.1.7501.1.2.101.3.1.1.21 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The output power low warning limit in 0.1 dBm units | ||||
| CovtxConfigurationOutputPwrLimitHi | 1.3.6.1.4.1.7501.1.2.101.3.1.1.22 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The output power high warning limit in 0.1 dBm units | ||||
| CovtxConfigurationOutputPwrLimitHiHi | 1.3.6.1.4.1.7501.1.2.101.3.1.1.23 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The output power high alarm limit in 0.1 dBm units | ||||
| CovtxConfigurationRedundancyMode | 1.3.6.1.4.1.7501.1.2.101.3.1.1.24 | RedundancyMode | RW | mandatory |
column · RedundancyMode · read-write · mandatory The device's redundancy mode. | ||||
| CovtxConfigurationRedundancyMask | 1.3.6.1.4.1.7501.1.2.101.3.1.1.25 | RedundancyMask | RW | mandatory |
column · RedundancyMask · read-write · mandatory The device's redundancy mask setings. | ||||
| CovtxConfigurationCsoRegulationMode | 1.3.6.1.4.1.7501.1.2.101.3.1.1.26 | CsoRegulationMode | RW | mandatory |
column · CsoRegulationMode · read-write · mandatory The desired CSO regulation mode of the optical transmitter. Only usable if ovtxDisplayExtendedCapabilities == true(1), otherwise always reports csoRegModeChannelControlled(1) | ||||
| CovtxConfigurationSlope | 1.3.6.1.4.1.7501.1.2.101.3.1.1.27 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The desired slope in 0.1 dB units (CATV input). Only usable if ovtxDisplayExtendedCapabilities == true(1), otherwise always reports zero | ||||
| CovtxConfigurationFiberLength | 1.3.6.1.4.1.7501.1.2.101.3.1.1.28 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The optical fiber length in meter units. Only usable if ovtxDisplayExtendedCapabilities == true(1), otherwise always reports zero | ||||
| CovtxConfigurationSatModeAGC | 1.3.6.1.4.1.7501.1.2.101.3.1.1.29 | SatAGCmode | RW | mandatory |
column · SatAGCmode · read-write · mandatory The AGC mode of the optical transmitter (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports satAgcOff(1) | ||||
| CovtxConfigurationSatOmi | 1.3.6.1.4.1.7501.1.2.101.3.1.1.30 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The desired offset from nominal OMI in 0.1dB units (SAT input). This parameter is only used if AGC is on. Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero | ||||
| CovtxConfigurationSatRfGain | 1.3.6.1.4.1.7501.1.2.101.3.1.1.31 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The desired offset from nominal gain in 0.1dB units (SAT input). This parameter is only used if AGC is off. Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero | ||||
| CovtxConfigurationSatSlope | 1.3.6.1.4.1.7501.1.2.101.3.1.1.32 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The desired slope in 0.1 dB units (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero | ||||
| CovtxConfigurationRfInputAlarmMode | 1.3.6.1.4.1.7501.1.2.101.3.1.1.33 | RfInputAlarmMode | RW | mandatory |
column · RfInputAlarmMode · read-write · mandatory The RF input alarm mode (Can be used to disable alarms of unused RF inputs) Only usable if ovtxDisplayRfInputCapabilities == rfInputCatvAndSatSupported(3), otherwise always reports alarmEnableAll(1) | ||||
| CovtxConfigurationSatLnbSupply | 1.3.6.1.4.1.7501.1.2.101.3.1.1.34 | LnbSupplyValue | RW | mandatory |
column · LnbSupplyValue · read-write · mandatory SAT LNB supply control. This feature is not supported by all transmitter devices, see ovtxDisplaySatLnbSupplySupported | ||||
| CovtxConfigurationSbsSuppressionMode | 1.3.6.1.4.1.7501.1.2.101.3.1.1.35 | SbsSuppressionModeValue | RW | mandatory |
column · SbsSuppressionModeValue · read-write · mandatory SBS suppression mode. This feature is not supported by all transmitter devices, see ovtxDisplaySbsSuppressionModeSupported | ||||
| CovtxConfigurationSbsFiberType | 1.3.6.1.4.1.7501.1.2.101.3.1.1.36 | SbsFiberTypeValue | RW | mandatory |
column · SbsFiberTypeValue · read-write · mandatory SBS fiber type. This feature is not supported by all transmitter devices, see ovtxDisplaySbsFiberParametersSupported | ||||
| CovtxConfigurationSbsFiberLength | 1.3.6.1.4.1.7501.1.2.101.3.1.1.37 | SbsFiberLengthValue | RW | mandatory |
column · SbsFiberLengthValue · read-write · mandatory SBS suppression mode. This feature is not supported by all transmitter devices, see ovtxDisplaySbsFiberParametersSupported | ||||
| NovtxControl | 1.3.6.1.4.1.7501.1.2.101.4 | |||
| TovtxControlTable | 1.3.6.1.4.1.7501.1.2.101.4.1 | NA | mandatory | |
| RovtxControlEntry | 1.3.6.1.4.1.7501.1.2.101.4.1.1 | NA | mandatory | |
| CovtxControlLaserOutputMode | 1.3.6.1.4.1.7501.1.2.101.4.1.1.1 | LaserOutputMode | RW | mandatory |
column · LaserOutputMode · read-write · mandatory The output mode of the laser.
NOTE: The error mask used for parameter 'laserShutdownOnMaskedError(3)'
is the same mask used for external IO port, 'ovtxConfigurationRedundancyMask' | ||||
| CovtxControlReset | 1.3.6.1.4.1.7501.1.2.101.4.1.1.2 | TruthValue | RW | mandatory |
column · TruthValue · read-write · mandatory Reset the module. | ||||
| CovtxControlModuleLedBlink | 1.3.6.1.4.1.7501.1.2.101.4.1.1.3 | TruthValue | RW | mandatory |
column · TruthValue · read-write · mandatory Writing this variable to true(1) lets the device's modul LED blink green for 10 seconds. Writing this variable to false(2) stops blinking at once. This variable always returns false(2) on read requests | ||||
| NovtxMeasuringValues | 1.3.6.1.4.1.7501.1.2.101.5 | |||
| TovtxMeasuringValuesTable | 1.3.6.1.4.1.7501.1.2.101.5.1 | NA | mandatory | |
| RovtxMeasuringValuesEntry | 1.3.6.1.4.1.7501.1.2.101.5.1.1 | NA | mandatory | |
| CovtxOmiMeasuredLoLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.1 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Measured-OMI offset low alarm threshold in steps of 0.1dB (CATV input). | ||||
| CovtxOmiMeasuredLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Measured-OMI offset low warning threshold in steps of 0.1dB (CATV input). | ||||
| CovtxOmiMeasuredValue | 1.3.6.1.4.1.7501.1.2.101.5.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The offset from nominal OMI in steps of 0.1dB (CATV input). If AGC is on this parameter is equal to ovtxConfigurationOmi. If AGC is off this paramters shows the Measured-OMI for the adjusted gain. | ||||
| CovtxOmiMeasuredHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Measured-OMI offset high warning threshold in steps of 0.1dB (CATV input). | ||||
| CovtxOmiMeasuredHiHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Measured-OMI offset high alarm threshold in steps of 0.1dB (CATV input). | ||||
| CovtxRfGainMeasuredLoLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.6 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Measured-Rf-Gain offset low alarm threshold in steps of 0.1dB (CATV input). | ||||
| CovtxRfGainMeasuredLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.7 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Measured-Rf-Gain offset low warning threshold in steps of 0.1dB (CATV input). | ||||
| CovtxRfGainMeasuredValue | 1.3.6.1.4.1.7501.1.2.101.5.1.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The offset from nominal gain in steps of 0.1dB (CATV input). If AGC is off this parameter is equal to ovtxConfigurationRfGain. If AGC is on this paramters shows the Measured-Rf-Gain for the adjusted omi. | ||||
| CovtxRfGainMeasuredHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.9 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Measured-Rf-Gain offset high warning threshold in steps of 0.1dB (CATV input). | ||||
| CovtxRfGainMeasuredHiHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.10 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Measured-Rf-Gain offset high alarm threshold in steps of 0.1dB (CATV input). | ||||
| CovtxLaserCurrentRelLoLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.11 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Relative laser current low alarm threshold in steps of 0.1%. | ||||
| CovtxLaserCurrentRelLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.12 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Relative laser current low warning threshold in steps of 0.1%. | ||||
| CovtxLaserCurrentRelValue | 1.3.6.1.4.1.7501.1.2.101.5.1.1.13 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The laser current relative to the current at begin of life in steps of 0.1%. | ||||
| CovtxLaserCurrentRelHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.14 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Relative laser current high warning threshold in steps of 0.1%. | ||||
| CovtxLaserCurrentRelHiHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.15 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Relative laser current high alarm threshold in steps of 0.1%. | ||||
| CovtxTecCurrentRelLoLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.16 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Thermo-electric-cooler current low alarm threshold in steps of 0.1%. | ||||
| CovtxTecCurrentRelLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.17 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Thermo-electric-cooler current low warning threshold in steps of 0.1%. | ||||
| CovtxTecCurrentRelValue | 1.3.6.1.4.1.7501.1.2.101.5.1.1.18 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The thermo-electric-cooler current relative to its absolute high alarm threshold in steps of 0.1%. | ||||
| CovtxTecCurrentRelHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.19 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Thermo-electric-cooler current high warning threshold in steps of 0.1%. | ||||
| CovtxTecCurrentRelHiHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.20 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Thermo-electric-cooler current high alarm threshold in steps of 0.1%. | ||||
| CovtxOutputPowerLoLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.21 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Output power low alarm threshold in steps of 0.1dBm. | ||||
| CovtxOutputPowerLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.22 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Output power low warning threshold in steps of 0.1dBm. | ||||
| CovtxOutputPowerValue | 1.3.6.1.4.1.7501.1.2.101.5.1.1.23 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Output power in steps of 0.1dBm. | ||||
| CovtxOutputPowerHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.24 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Output power high warning threshold in steps of 0.1dBm. | ||||
| CovtxOutputPowerHiHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.25 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Output power high alarm threshold in steps of 0.1dBm. | ||||
| CovtxPlus3p3VLoLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.26 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The +3.3V supply voltage low alarm threshold in steps of 0.1V. | ||||
| CovtxPlus3p3VLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.27 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The +3.3V supply voltage low warning threshold in steps of 0.1V. | ||||
| CovtxPlus3p3VValue | 1.3.6.1.4.1.7501.1.2.101.5.1.1.28 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The +3.3V supply voltage in steps of 0.1V. | ||||
| CovtxPlus3p3VHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.29 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The +3.3V supply voltage high warning threshold in steps of 0.1V. | ||||
| CovtxPlus3p3VHiHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.30 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The +3.3V supply voltage high alarm threshold in steps of 0.1V. | ||||
| CovtxPlus5VLoLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.31 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The +5V supply voltage low alarm threshold in steps of 0.1V. | ||||
| CovtxPlus5VLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.32 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The +5V supply voltage low warning threshold in steps of 0.1V. | ||||
| CovtxPlus5VValue | 1.3.6.1.4.1.7501.1.2.101.5.1.1.33 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The +5V supply voltage in steps of 0.1V. | ||||
| CovtxPlus5VHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.34 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The +5V supply voltage high warning threshold in steps of 0.1V. | ||||
| CovtxPlus5VHiHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.35 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The +5V supply voltage high alarm threshold in steps of 0.1V. | ||||
| CovtxPlus12VLoLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.36 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The +12V supply voltage low alarm threshold in steps of 0.1V. | ||||
| CovtxPlus12VLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.37 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The +12V supply voltage low warning threshold in steps of 0.1V. | ||||
| CovtxPlus12VValue | 1.3.6.1.4.1.7501.1.2.101.5.1.1.38 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The +12V supply voltage in steps of 0.1V. | ||||
| CovtxPlus12VHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.39 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The +12V supply voltage high warning threshold in steps of 0.1V. | ||||
| CovtxPlus12VHiHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.40 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The +12V supply voltage high alarm threshold in steps of 0.1V. | ||||
| CovtxPlus24VLoLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.41 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The +24V supply voltage low alarm threshold in steps of 0.1V. | ||||
| CovtxPlus24VLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.42 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The +24V supply voltage low warning threshold in steps of 0.1V. | ||||
| CovtxPlus24VValue | 1.3.6.1.4.1.7501.1.2.101.5.1.1.43 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The +24V supply voltage in steps of 0.1V. | ||||
| CovtxPlus24VHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.44 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The +24V supply voltage high warning threshold in steps of 0.1V. | ||||
| CovtxPlus24VHiHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.45 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The +24V supply voltage high alarm threshold in steps of 0.1V. | ||||
| CovtxMinus5VLoLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.46 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The -5V supply voltage low alarm threshold in steps of 0.1V. | ||||
| CovtxMinus5VLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.47 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The -5V supply voltage low warning threshold in steps of 0.1V. | ||||
| CovtxMinus5VValue | 1.3.6.1.4.1.7501.1.2.101.5.1.1.48 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The -5V supply voltage in steps of 0.1V. | ||||
| CovtxMinus5VHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.49 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The -5V supply voltage high warning threshold in steps of 0.1V. | ||||
| CovtxMinus5VHiHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.50 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The -5V supply voltage high alarm threshold in steps of 0.1V. | ||||
| CovtxMinus12VLoLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.51 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The -12V supply voltage low alarm threshold in steps of 0.1V. | ||||
| CovtxMinus12VLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.52 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The -12V supply voltage low warning threshold in steps of 0.1V. | ||||
| CovtxMinus12VValue | 1.3.6.1.4.1.7501.1.2.101.5.1.1.53 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The -12V supply voltage in steps of 0.1V. | ||||
| CovtxMinus12VHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.54 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The -12V supply voltage high warning threshold in steps of 0.1V. | ||||
| CovtxMinus12VHiHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.55 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The -12V supply voltage high alarm threshold in steps of 0.1V. | ||||
| CovtxTemperatureLoLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.56 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The module temperature low alarm threshold in steps of 0.1 celsius degrees. | ||||
| CovtxTemperatureLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.57 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The module temperature low warning threshold in steps of 0.1 celsius degrees. | ||||
| CovtxTemperatureValue | 1.3.6.1.4.1.7501.1.2.101.5.1.1.58 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The module temperature in steps of 0.1 celsius degrees. | ||||
| CovtxTemperatureHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.59 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The module temperature high warning threshold in steps of 0.1 celsius degrees. | ||||
| CovtxTemperatureHiHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.60 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The module temperature high alarm threshold in steps of 0.1 celsius degrees. | ||||
| CovtxRfInputLoLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.61 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory RfInput (total rms) low alarm threshold in steps of 0.1 dBm (CATV input). | ||||
| CovtxRfInputLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.62 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory RfInput (total rms) low warning threshold in steps of 0.1 dBm (CATV input). | ||||
| CovtxRfInputValue | 1.3.6.1.4.1.7501.1.2.101.5.1.1.63 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory RfInput (total rms) in steps of 0.1 dBm (CATV input). | ||||
| CovtxRfInputHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.64 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory RfInput (total rms) high warning threshold in steps of 0.1 dBm (CATV input). | ||||
| CovtxRfInputHiHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.65 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory RfInput (total rms) high alarm threshold in steps of 0.1 dBm (CATV input). | ||||
| CovtxSatRfInputLoLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.66 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory RfInput (total rms) low alarm threshold in steps of 0.1 dBm (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero. | ||||
| CovtxSatRfInputLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.67 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory RfInput (total rms) low warning threshold in steps of 0.1 dBm (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero. | ||||
| CovtxSatRfInputValue | 1.3.6.1.4.1.7501.1.2.101.5.1.1.68 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory RfInput (total rms) in steps of 0.1 dBm (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero. | ||||
| CovtxSatRfInputHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.69 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory RfInput (total rms) high warning threshold in steps of 0.1 dBm (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero. | ||||
| CovtxSatRfInputHiHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.70 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory RfInput (total rms) high alarm threshold in steps of 0.1 dBm (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero. | ||||
| CovtxSatOmiMeasuredLoLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.71 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Measured-OMI offset low alarm threshold in steps of 0.1dB (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero. | ||||
| CovtxSatOmiMeasuredLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.72 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Measured-OMI offset low warning threshold in steps of 0.1dB (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero. | ||||
| CovtxSatOmiMeasuredValue | 1.3.6.1.4.1.7501.1.2.101.5.1.1.73 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The offset from nominal OMI in steps of 0.1dB (SAT input). If SAT AGC is on this parameter is equal to ovtxConfigurationSatOmi. If SAT AGC is off this paramters shows the measured-OMI for the adjusted gain. Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero. | ||||
| CovtxSatOmiMeasuredHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.74 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Measured-OMI offset high warning threshold in steps of 0.1dB (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero. | ||||
| CovtxSatOmiMeasuredHiHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.75 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Measured-OMI offset high alarm threshold in steps of 0.1dB (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero. | ||||
| CovtxSatRfGainMeasuredLoLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.76 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Measured-Rf-Gain offset low alarm threshold in steps of 0.1dB (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero. | ||||
| CovtxSatRfGainMeasuredLo | 1.3.6.1.4.1.7501.1.2.101.5.1.1.77 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Measured-Rf-Gain offset low warning threshold in steps of 0.1dB (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero. | ||||
| CovtxSatRfGainMeasuredValue | 1.3.6.1.4.1.7501.1.2.101.5.1.1.78 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The offset from nominal gain in steps of 0.1dB (SAT input). If AGC is off this parameter is equal to ovtxConfigurationSatRfGain. If AGC is on this paramters shows the measured-Rf-Gain for the adjusted omi. Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero. | ||||
| CovtxSatRfGainMeasuredHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.79 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Measured-Rf-Gain offset high warning threshold in steps of 0.1dB (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero. | ||||
| CovtxSatRfGainMeasuredHiHi | 1.3.6.1.4.1.7501.1.2.101.5.1.1.80 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Measured-Rf-Gain offset high alarm threshold in steps of 0.1dB (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero. | ||||
| NovtxDisplay | 1.3.6.1.4.1.7501.1.2.101.6 | |||
| TovtxDisplayTable | 1.3.6.1.4.1.7501.1.2.101.6.1 | NA | mandatory | |
| RovtxDisplayEntry | 1.3.6.1.4.1.7501.1.2.101.6.1.1 | NA | mandatory | |
row · not-accessible · mandatory
| ||||
| CovtxDisplayRfInputValue | 1.3.6.1.4.1.7501.1.2.101.6.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory RfInput (total rms) in steps of 0.1 dBm. | ||||
| CovtxDisplayLaserFrequencyMin | 1.3.6.1.4.1.7501.1.2.101.6.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The minimum adjustable laser frequency in GHz units. | ||||
| CovtxDisplayLaserFrequencyMax | 1.3.6.1.4.1.7501.1.2.101.6.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The maximum adjustable laser frequency in GHz units. | ||||
| CovtxDisplayLaserFrequencyStep | 1.3.6.1.4.1.7501.1.2.101.6.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The supported laser frequency stepsize in GHz units. | ||||
| CovtxDisplayOmiNominal | 1.3.6.1.4.1.7501.1.2.101.6.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The nominal OMI in 0.1 percent units (CATV input) | ||||
| CovtxDisplaySatOmiNominal | 1.3.6.1.4.1.7501.1.2.101.6.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The nominal OMI in 0.1 percent units (SAT input) Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero | ||||
| CovtxDisplayRegulationState | 1.3.6.1.4.1.7501.1.2.101.6.1.1.7 | RegulationState | RO | mandatory |
column · RegulationState · read-only · mandatory The transmitters current regulation state Only usable if ovtxDisplayExtendedCapabilities == true(1), otherwise always reports regulationStateUnknownOrNotSupported(1) | ||||
| CovtxDisplayExtendedCapabilities | 1.3.6.1.4.1.7501.1.2.101.6.1.1.8 | TruthValue | RO | mandatory |
column · TruthValue · read-only · mandatory Returns true(1) if the transmitter supports the extended features represented by the variables ovtxConfigurationCsoRegulationMode, ovtxConfigurationSlope and ovtxConfigurationFiberLength | ||||
| CovtxDisplayRfInputCapabilities | 1.3.6.1.4.1.7501.1.2.101.6.1.1.9 | RfInputCapabilities | RO | mandatory |
column · RfInputCapabilities · read-only · mandatory Returns the transmitter supported RF input capabilities | ||||
| CovtxDisplaySatLnbSupplySupported | 1.3.6.1.4.1.7501.1.2.101.6.1.1.10 | LnbSupplySupportedValue | RO | mandatory |
column · LnbSupplySupportedValue · read-only · mandatory Returns the supported SAT LNB supply features | ||||
| CovtxDisplaySbsExtensionsSupported | 1.3.6.1.4.1.7501.1.2.101.6.1.1.11 | TruthValue | RO | mandatory |
column · TruthValue · read-only · mandatory Returns true(1) if the transmitter supports the extended SBS alarm features | ||||
| CovtxDisplaySbsSuppressionModeSupported | 1.3.6.1.4.1.7501.1.2.101.6.1.1.12 | TruthValue | RO | mandatory |
column · TruthValue · read-only · mandatory Returns true(1) if the transmitter supports the SbsSuppressionMode configuration feature | ||||
| CovtxDisplaySbsFiberParametersSupported | 1.3.6.1.4.1.7501.1.2.101.6.1.1.13 | TruthValue | RO | mandatory |
column · TruthValue · read-only · mandatory Returns true(1) if the transmitter supports the SbsFiber configuration feature | ||||