BKTEL-HFC862-OA-V01-MIB
HUBER+SUHNER BKtel GmbH (HFC)snmptranslate -m BKTEL-HFC862-OA-V01-MIB -Tpsnmpwalk -v2c -c <community> -m BKTEL-HFC862-OA-V01-MIB <host> 1.3.6.1.4.1.7501.1.2.116Imports
| BKTEL-HFC862-BASE-MIB | DisplayString, ModuleWidthValue, NESlotValue, PerceivedSeverityValue, TruthValue, modules |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Noa | 1.3.6.1.4.1.7501.1.2.116 | ||||||||||||
| NoaCommon | 1.3.6.1.4.1.7501.1.2.116.1 | ||||||||||||
| SoaCommonNumberOfModules | 1.3.6.1.4.1.7501.1.2.116.1.1 | INTEGER (0..50) | RO | mandatory | |||||||||
scalar · INTEGER (0..50) · read-only · mandatory Number of modules in table. | |||||||||||||
| ToaCommonTable | 1.3.6.1.4.1.7501.1.2.116.1.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory The table contains all modules of the OA-type in the NE | |||||||||||||
| RoaCommonEntry | 1.3.6.1.4.1.7501.1.2.116.1.2.1 | NA | mandatory | ||||||||||
| CoaNESlot | 1.3.6.1.4.1.7501.1.2.116.1.2.1.1 | NESlotValue | RO | mandatory | |||||||||
column · NESlotValue · read-only · mandatory The slot number of the chassis for which this entry contains management information. | |||||||||||||
| CoaCommonType | 1.3.6.1.4.1.7501.1.2.116.1.2.1.2 | DisplayString (SIZE (0..32)) | RO | mandatory | KOA32165 | ||||||||
column · DisplayString (SIZE (0..32)) · read-only · mandatory The type of physical module. modSlotEmpty indicates an empty slot. A Value of modSlotUnknown indicates that the type of module is unknown. Example values from LibreNMS test devices
| |||||||||||||
| CoaCommonDescr | 1.3.6.1.4.1.7501.1.2.116.1.2.1.3 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory A textual description of the module. If not available, this Value should be set to a zero length string. | |||||||||||||
| CoaCommonFirmwareId | 1.3.6.1.4.1.7501.1.2.116.1.2.1.4 | DisplayString (SIZE (0..32)) | RO | mandatory | |||||||||
column · DisplayString (SIZE (0..32)) · read-only · mandatory The firmware Id of the module. | |||||||||||||
| CoaCommonModuleWidth | 1.3.6.1.4.1.7501.1.2.116.1.2.1.5 | ModuleWidthValue | RO | optional | |||||||||
column · ModuleWidthValue · read-only · optional The width of the module in multiples of slots (1, 2, ...) | |||||||||||||
| NoaStates | 1.3.6.1.4.1.7501.1.2.116.2 | ||||||||||||
| ToaStatesTable | 1.3.6.1.4.1.7501.1.2.116.2.1 | NA | mandatory | ||||||||||
| RoaStatesEntry | 1.3.6.1.4.1.7501.1.2.116.2.1.1 | NA | mandatory | ||||||||||
| CoaStatesBootloader | 1.3.6.1.4.1.7501.1.2.116.2.1.1.1 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory The device is running in bootloader mode without a legal application software. | |||||||||||||
| CoaStatesCommLoss | 1.3.6.1.4.1.7501.1.2.116.2.1.1.2 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory The NEC has lost the connection to the device. Reason may be a removed or defective device. Note that this state is set by the NEC and not by the device | |||||||||||||
| CoaStatesInitializing | 1.3.6.1.4.1.7501.1.2.116.2.1.1.3 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory The device is initializing | |||||||||||||
| CoaStatesLaserShutdown | 1.3.6.1.4.1.7501.1.2.116.2.1.1.4 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory Lasers are shutdown, no optical output | |||||||||||||
| CoaStatesTemperatureLow | 1.3.6.1.4.1.7501.1.2.116.2.1.1.5 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory Device internal temperature low | |||||||||||||
| CoaStatesTemperatureHigh | 1.3.6.1.4.1.7501.1.2.116.2.1.1.6 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory Device internal temperature high | |||||||||||||
| CoaStatesSystem | 1.3.6.1.4.1.7501.1.2.116.2.1.1.7 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory Internal error occured | |||||||||||||
| CoaStatesInputPwrLow | 1.3.6.1.4.1.7501.1.2.116.2.1.1.8 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory Optical input power low | |||||||||||||
| CoaStatesInputPwrHigh | 1.3.6.1.4.1.7501.1.2.116.2.1.1.9 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory Optical input power high | |||||||||||||
| CoaStatesOutputPwrOrGainLow | 1.3.6.1.4.1.7501.1.2.116.2.1.1.10 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory Optical output power (or gain) low | |||||||||||||
| CoaStatesOutputPwrOrGainHigh | 1.3.6.1.4.1.7501.1.2.116.2.1.1.11 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory Optical output power (or gain) high | |||||||||||||
| CoaStatesReturnLossLow | 1.3.6.1.4.1.7501.1.2.116.2.1.1.12 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory Return loss low | |||||||||||||
| CoaStatesReturnLossHigh | 1.3.6.1.4.1.7501.1.2.116.2.1.1.13 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory Return loss high | |||||||||||||
| CoaStatesRedundancySwitch | 1.3.6.1.4.1.7501.1.2.116.2.1.1.14 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory This (redundant) device has been activated (redundancy switchover) | |||||||||||||
| CoaStatesInputVoltageLow | 1.3.6.1.4.1.7501.1.2.116.2.1.1.15 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory Input supply voltage low | |||||||||||||
| CoaStatesInputVoltageHigh | 1.3.6.1.4.1.7501.1.2.116.2.1.1.16 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory Input supply voltage high | |||||||||||||
| CoaStatesPowerSupplyLeft | 1.3.6.1.4.1.7501.1.2.116.2.1.1.25 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory The left (looking from front) power supply unit fails. Only valid for devices in 19 inch housing | |||||||||||||
| CoaStatesPowerSupplyRight | 1.3.6.1.4.1.7501.1.2.116.2.1.1.26 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory The right (looking from front) power supply unit fails. Only valid for devices in 19 inch housing | |||||||||||||
| CoaStatesFanLeft | 1.3.6.1.4.1.7501.1.2.116.2.1.1.27 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory The left (looking from front) fan unit fails. Only valid for devices in 19 inch housing | |||||||||||||
| CoaStatesFanRight | 1.3.6.1.4.1.7501.1.2.116.2.1.1.28 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory The right (looking from front) fan unit fails. Only valid for devices in 19 inch housing | |||||||||||||
| CoaStatesInternalVoltageLow | 1.3.6.1.4.1.7501.1.2.116.2.1.1.29 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory One (or more) internal voltages low | |||||||||||||
| CoaStatesInternalVoltageHigh | 1.3.6.1.4.1.7501.1.2.116.2.1.1.30 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory One (or more) internal voltages high | |||||||||||||
| CoaStatesLaserCurrentLow | 1.3.6.1.4.1.7501.1.2.116.2.1.1.31 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory Laser current of one (or more) lasers low | |||||||||||||
| CoaStatesLaserCurrentHigh | 1.3.6.1.4.1.7501.1.2.116.2.1.1.32 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory Laser current of one (or more) lasers high (laser is aging) | |||||||||||||
| CoaStatesTecCurrentLow | 1.3.6.1.4.1.7501.1.2.116.2.1.1.33 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory Laser TEC current limit of one (or more) lasers reached (heating limit) | |||||||||||||
| CoaStatesTecCurrentHigh | 1.3.6.1.4.1.7501.1.2.116.2.1.1.34 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory Laser TEC current limit of one (or more) lasers reached (cooling limit) | |||||||||||||
| CoaStatesLaserTempLow | 1.3.6.1.4.1.7501.1.2.116.2.1.1.35 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory Laser temperature of one (or more) lasers low | |||||||||||||
| CoaStatesLaserTempHigh | 1.3.6.1.4.1.7501.1.2.116.2.1.1.36 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory Laser temperature of one (or more) lasers high | |||||||||||||
| CoaStatesLaserVoltageLow | 1.3.6.1.4.1.7501.1.2.116.2.1.1.37 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory Laser voltage supply of one (or more) lasers low | |||||||||||||
| CoaStatesLaserVoltageHigh | 1.3.6.1.4.1.7501.1.2.116.2.1.1.38 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory Laser voltage supply of one (or more) lasers high | |||||||||||||
| CoaStatesRamanBackReflectionRatio | 1.3.6.1.4.1.7501.1.2.116.2.1.1.39 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory Raman amplifier back reflection ratio high alarm Only used if oaDisplayAmplifierIsRamanType == true(1) | |||||||||||||
| CoaStatesRamanOscSignalMissing | 1.3.6.1.4.1.7501.1.2.116.2.1.1.40 | PerceivedSeverityValue | RO | mandatory | |||||||||
column · PerceivedSeverityValue · read-only · mandatory Raman amplifier oscillator signal missing alarm Only used if oaDisplayAmplifierIsRamanType == true(1) | |||||||||||||
| NoaConfiguration | 1.3.6.1.4.1.7501.1.2.116.3 | ||||||||||||
| ToaConfigurationTable | 1.3.6.1.4.1.7501.1.2.116.3.1 | NA | mandatory | ||||||||||
| RoaConfigurationEntry | 1.3.6.1.4.1.7501.1.2.116.3.1.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory
| |||||||||||||
| CoaConfigNESlotWrite | 1.3.6.1.4.1.7501.1.2.116.3.1.1.1 | NESlotWriteValue | RW | optional | |||||||||
column · NESlotWriteValue · read-write · optional By writing this variable a slot can be assigned for devices that dont support hardware slot detection. Reading '-1' means that the slot position is NOT writable. | |||||||||||||
| CoaConfigRegulationMode | 1.3.6.1.4.1.7501.1.2.116.3.1.1.2 | RegulationMode | RW | mandatory | |||||||||
column · RegulationMode · read-write · mandatory The regulation mode of the device. - regModeConstantOutputPower(1): If the device runs in constant output power mode, then all *OutputPwrOrGain* variables are interpreted as 'Output Power' specific. - regModeConstantGain(2): If the device runs in constant gain mode, then all *OutputPwrOrGain* variables are interpreted as 'Gain' specific. | |||||||||||||
| CoaConfigOutputPwrOrGainAdjust | 1.3.6.1.4.1.7501.1.2.116.3.1.1.3 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This variable can be used to adjust the desired output power (or gain) value in 0.1 dB units relative to its nominal level. See oaConfigRegulationMode variable too | |||||||||||||
| CoaConfigModeExtIO | 1.3.6.1.4.1.7501.1.2.116.3.1.1.4 | ExtIOmode | RW | mandatory | |||||||||
column · ExtIOmode · read-write · mandatory The mode and usage of the device's external IO port. | |||||||||||||
| CoaConfigMaskExtIO | 1.3.6.1.4.1.7501.1.2.116.3.1.1.5 | ExtIOmask | RW | mandatory | |||||||||
column · ExtIOmask · read-write · mandatory The alarm/warning mask that activates the device's external IO port. | |||||||||||||
| CoaConfigSbsEvaluationMode | 1.3.6.1.4.1.7501.1.2.116.3.1.1.6 | SbsEvaluationMode | RW | mandatory | |||||||||
column · SbsEvaluationMode · read-write · mandatory The SBS threshold evaluation mode. | |||||||||||||
| NoaControl | 1.3.6.1.4.1.7501.1.2.116.4 | ||||||||||||
| ToaControlTable | 1.3.6.1.4.1.7501.1.2.116.4.1 | NA | mandatory | ||||||||||
| RoaControlEntry | 1.3.6.1.4.1.7501.1.2.116.4.1.1 | NA | mandatory | ||||||||||
| CoaControlLaserShutdown | 1.3.6.1.4.1.7501.1.2.116.4.1.1.1 | TruthValue | RW | mandatory | |||||||||
column · TruthValue · read-write · mandatory Shutdown the laser(s), optical power on/off. | |||||||||||||
| CoaControlReset | 1.3.6.1.4.1.7501.1.2.116.4.1.1.2 | TruthValue | RW | mandatory | |||||||||
column · TruthValue · read-write · mandatory Reset the module. | |||||||||||||
| CoaControlModuleLedBlink | 1.3.6.1.4.1.7501.1.2.116.4.1.1.3 | TruthValue | RW | mandatory | |||||||||
column · TruthValue · read-write · mandatory Writing this variable to true(1) lets the device's modul LED blink green for 10 seconds. Writing this variable to false(2) stops blinking at once. This variable always returns false(2) on read requests | |||||||||||||
| CoaControlSbsEvaluationStart | 1.3.6.1.4.1.7501.1.2.116.4.1.1.4 | TruthValue | RW | mandatory | |||||||||
column · TruthValue · read-write · mandatory Setting to true(1) starts an SBS threshold evaluation process. Always reads as false(2) | |||||||||||||
| NoaMeasuringValues | 1.3.6.1.4.1.7501.1.2.116.5 | ||||||||||||
| ToaMeasuringValuesTable | 1.3.6.1.4.1.7501.1.2.116.5.1 | NA | mandatory | ||||||||||
| RoaMeasuringValuesEntry | 1.3.6.1.4.1.7501.1.2.116.5.1.1 | NA | mandatory | ||||||||||
| CoaTemperatureLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.1 | INTEGER | RO | mandatory | -250 | ||||||||
column · INTEGER · read-only · mandatory The module temperature low alarm threshold in steps of 0.1 celsius degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaTemperatureLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.2 | INTEGER | RO | mandatory | -200 | ||||||||
column · INTEGER · read-only · mandatory The module temperature low warning threshold in steps of 0.1 celsius degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaTemperatureValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.3 | INTEGER | RO | mandatory | 360 | ||||||||
column · INTEGER · read-only · mandatory The module temperature in steps of 0.1 celsius degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaTemperatureHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.4 | INTEGER | RO | mandatory | 700 | ||||||||
column · INTEGER · read-only · mandatory The module temperature high warning threshold in steps of 0.1 celsius degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaTemperatureHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.5 | INTEGER | RO | mandatory | 750 | ||||||||
column · INTEGER · read-only · mandatory The module temperature high alarm threshold in steps of 0.1 celsius degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaInputPowerLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.6 | INTEGER | RW | mandatory | -50 | ||||||||
column · INTEGER · read-write · mandatory Input power low alarm threshold in steps of 0.1dBm. Example values from LibreNMS test devices
| |||||||||||||
| CoaInputPowerLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.7 | INTEGER | RW | mandatory | -30 | ||||||||
column · INTEGER · read-write · mandatory Input power low warning threshold in steps of 0.1dBm. Example values from LibreNMS test devices
| |||||||||||||
| CoaInputPowerValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.8 | INTEGER | RO | mandatory | 65 | ||||||||
column · INTEGER · read-only · mandatory Input power in steps of 0.1dBm. Example values from LibreNMS test devices
| |||||||||||||
| CoaInputPowerHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.9 | INTEGER | RW | mandatory | 95 | ||||||||
column · INTEGER · read-write · mandatory Input power high warning threshold in steps of 0.1dBm. Example values from LibreNMS test devices
| |||||||||||||
| CoaInputPowerHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.10 | INTEGER | RW | mandatory | 100 | ||||||||
column · INTEGER · read-write · mandatory Input power high alarm threshold in steps of 0.1dBm. Example values from LibreNMS test devices
| |||||||||||||
| CoaOutputPwrOrGainLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.11 | INTEGER | RW | mandatory | 135 | ||||||||
column · INTEGER · read-write · mandatory Output power (or gain) low alarm threshold in steps of 0.1dB(m). See oaConfigRegulationMode variable too Example values from LibreNMS test devices
| |||||||||||||
| CoaOutputPwrOrGainLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.12 | INTEGER | RW | mandatory | 155 | ||||||||
column · INTEGER · read-write · mandatory Output power (or gain) low warning threshold in steps of 0.1dB(m). See oaConfigRegulationMode variable too Example values from LibreNMS test devices
| |||||||||||||
| CoaOutputPwrOrGainValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.13 | INTEGER | RO | mandatory | 165 | ||||||||
column · INTEGER · read-only · mandatory Output power (or gain) in steps of 0.1dB(m). See oaConfigRegulationMode variable too Example values from LibreNMS test devices
| |||||||||||||
| CoaOutputPwrOrGainHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.14 | INTEGER | RW | mandatory | 175 | ||||||||
column · INTEGER · read-write · mandatory Output power (or gain) high warning threshold in steps of 0.1dB(m). See oaConfigRegulationMode variable too Example values from LibreNMS test devices
| |||||||||||||
| CoaOutputPwrOrGainHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.15 | INTEGER | RW | mandatory | 195 | ||||||||
column · INTEGER · read-write · mandatory Output power (or gain) high alarm threshold in steps of 0.1dB(m). See oaConfigRegulationMode variable too Example values from LibreNMS test devices
| |||||||||||||
| CoaReturnLossLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.16 | INTEGER | RW | mandatory | 0 | ||||||||
column · INTEGER · read-write · mandatory ReturnLoss low alarm threshold in steps of 0.1 dB. Example values from LibreNMS test devices
| |||||||||||||
| CoaReturnLossLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.17 | INTEGER | RW | mandatory | 0 | ||||||||
column · INTEGER · read-write · mandatory ReturnLoss low warning threshold in steps of 0.1 dB. Example values from LibreNMS test devices
| |||||||||||||
| CoaReturnLossValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.18 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory ReturnLoss in steps of 0.1 dB. Example values from LibreNMS test devices
| |||||||||||||
| CoaReturnLossHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.19 | INTEGER | RW | mandatory | 0 | ||||||||
column · INTEGER · read-write · mandatory ReturnLoss high warning threshold in steps of 0.1 dB. Example values from LibreNMS test devices
| |||||||||||||
| CoaReturnLossHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.20 | INTEGER | RW | mandatory | 0 | ||||||||
column · INTEGER · read-write · mandatory ReturnLoss high alarm threshold in steps of 0.1 dB. Example values from LibreNMS test devices
| |||||||||||||
| CoaInputVoltageLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.21 | INTEGER | RO | mandatory | 200 | ||||||||
column · INTEGER · read-only · mandatory The input supply voltage low alarm threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaInputVoltageLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.22 | INTEGER | RO | mandatory | 210 | ||||||||
column · INTEGER · read-only · mandatory The input supply voltage low warning threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaInputVoltageValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.23 | INTEGER | RO | mandatory | 240 | ||||||||
column · INTEGER · read-only · mandatory The input supply voltage in steps of 0.1 Volts. Input supply voltage nominal value, see 'oaDisplayInputVoltageNominal' Example values from LibreNMS test devices
| |||||||||||||
| CoaInputVoltageHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.24 | INTEGER | RO | mandatory | 270 | ||||||||
column · INTEGER · read-only · mandatory The input supply voltage high warning threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaInputVoltageHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.25 | INTEGER | RO | mandatory | 280 | ||||||||
column · INTEGER · read-only · mandatory The input supply voltage high alarm threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaInternalVoltage1LoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.46 | INTEGER | RO | optional | 30 | ||||||||
column · INTEGER · read-only · optional The internal voltage low alarm threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaInternalVoltage1Lo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.47 | INTEGER | RO | optional | 31 | ||||||||
column · INTEGER · read-only · optional The internal voltage low warning threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaInternalVoltage1Value | 1.3.6.1.4.1.7501.1.2.116.5.1.1.48 | INTEGER | RO | optional | 33 | ||||||||
column · INTEGER · read-only · optional The internal voltage in steps of 0.1 Volts. Internal voltage nominal value, see 'oaDisplayInternalVoltage1Nominal' Example values from LibreNMS test devices
| |||||||||||||
| CoaInternalVoltage1Hi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.49 | INTEGER | RO | optional | 35 | ||||||||
column · INTEGER · read-only · optional The internal voltage high warning threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaInternalVoltage1HiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.50 | INTEGER | RO | optional | 36 | ||||||||
column · INTEGER · read-only · optional The internal voltage high alarm threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaInternalVoltage2LoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.51 | INTEGER | RO | optional | 45 | ||||||||
column · INTEGER · read-only · optional The internal voltage low alarm threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaInternalVoltage2Lo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.52 | INTEGER | RO | optional | 46 | ||||||||
column · INTEGER · read-only · optional The internal voltage low warning threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaInternalVoltage2Value | 1.3.6.1.4.1.7501.1.2.116.5.1.1.53 | INTEGER | RO | optional | 50 | ||||||||
column · INTEGER · read-only · optional The internal voltage in steps of 0.1 Volts. Internal voltage nominal value, see 'oaDisplayInternalVoltage2Nominal' Example values from LibreNMS test devices
| |||||||||||||
| CoaInternalVoltage2Hi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.54 | INTEGER | RO | optional | 54 | ||||||||
column · INTEGER · read-only · optional The internal voltage high warning threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaInternalVoltage2HiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.55 | INTEGER | RO | optional | 55 | ||||||||
column · INTEGER · read-only · optional The internal voltage high alarm threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaInternalVoltage3LoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.56 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The internal voltage low alarm threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaInternalVoltage3Lo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.57 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The internal voltage low warning threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaInternalVoltage3Value | 1.3.6.1.4.1.7501.1.2.116.5.1.1.58 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The internal voltage in steps of 0.1 Volts. Internal voltage nominal value, see 'oaDisplayInternalVoltage3Nominal' Example values from LibreNMS test devices
| |||||||||||||
| CoaInternalVoltage3Hi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.59 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The internal voltage high warning threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaInternalVoltage3HiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.60 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The internal voltage high alarm threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser1CurrentRelLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.86 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Relative laser no.1 current low alarm threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser1CurrentRelLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.87 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Relative laser no.1 current low warning threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser1CurrentRelValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.88 | INTEGER | RO | mandatory | 993 | ||||||||
column · INTEGER · read-only · mandatory The laser no.1 current relative to the current at begin of life in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser1CurrentRelHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.89 | INTEGER | RO | mandatory | 1400 | ||||||||
column · INTEGER · read-only · mandatory Relative laser no.1 current high warning threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser1CurrentRelHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.90 | INTEGER | RO | mandatory | 2000 | ||||||||
column · INTEGER · read-only · mandatory Relative laser no.1 current high alarm threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser1TecRelLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.91 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Thermo-electric-cooler current of laser no.1 low alarm threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser1TecRelLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.92 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Thermo-electric-cooler current of laser no.1 low warning threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser1TecRelValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.93 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory The thermo-electric-cooler current of laser no.1 relative to its maximum value in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser1TecRelHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.94 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Thermo-electric-cooler current of laser no.1 high warning threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser1TecRelHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.95 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Thermo-electric-cooler current of laser no.1 high alarm threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser1TemperatureLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.96 | INTEGER | RO | mandatory | 50 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 low alarm threshold in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser1TemperatureLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.97 | INTEGER | RO | mandatory | 100 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 low warning threshold in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser1TemperatureValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.98 | INTEGER | RO | mandatory | 250 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser1TemperatureHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.99 | INTEGER | RO | mandatory | 300 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 high warning threshold in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser1TemperatureHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.100 | INTEGER | RO | mandatory | 350 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 high alarm threshold in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser1VoltageLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.101 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 low alarm threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser1VoltageLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.102 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 low warning threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser1VoltageValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.103 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser1VoltageHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.104 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 high warning threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser1VoltageHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.105 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 high alarm threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser2CurrentRelLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.111 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Relative laser no.1 current low alarm threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser2CurrentRelLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.112 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Relative laser no.1 current low warning threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser2CurrentRelValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.113 | INTEGER | RO | mandatory | 729 | ||||||||
column · INTEGER · read-only · mandatory The laser no.1 current relative to the current at begin of life in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser2CurrentRelHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.114 | INTEGER | RO | mandatory | 1400 | ||||||||
column · INTEGER · read-only · mandatory Relative laser no.1 current high warning threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser2CurrentRelHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.115 | INTEGER | RO | mandatory | 2000 | ||||||||
column · INTEGER · read-only · mandatory Relative laser no.1 current high alarm threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser2TecRelLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.116 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Thermo-electric-cooler current of laser no.1 low alarm threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser2TecRelLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.117 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Thermo-electric-cooler current of laser no.1 low warning threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser2TecRelValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.118 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory The thermo-electric-cooler current of laser no.1 relative to its maximum value in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser2TecRelHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.119 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Thermo-electric-cooler current of laser no.1 high warning threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser2TecRelHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.120 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Thermo-electric-cooler current of laser no.1 high alarm threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser2TemperatureLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.121 | INTEGER | RO | mandatory | -300 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 low alarm threshold in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser2TemperatureLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.122 | INTEGER | RO | mandatory | -250 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 low warning threshold in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser2TemperatureValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.123 | INTEGER | RO | mandatory | 362 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser2TemperatureHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.124 | INTEGER | RO | mandatory | 750 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 high warning threshold in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser2TemperatureHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.125 | INTEGER | RO | mandatory | 800 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 high alarm threshold in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser2VoltageLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.126 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 low alarm threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser2VoltageLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.127 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 low warning threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser2VoltageValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.128 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser2VoltageHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.129 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 high warning threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser2VoltageHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.130 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 high alarm threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser3CurrentRelLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.136 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Relative laser no.1 current low alarm threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser3CurrentRelLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.137 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Relative laser no.1 current low warning threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser3CurrentRelValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.138 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory The laser no.1 current relative to the current at begin of life in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser3CurrentRelHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.139 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Relative laser no.1 current high warning threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser3CurrentRelHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.140 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Relative laser no.1 current high alarm threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser3TecRelLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.141 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Thermo-electric-cooler current of laser no.1 low alarm threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser3TecRelLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.142 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Thermo-electric-cooler current of laser no.1 low warning threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser3TecRelValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.143 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory The thermo-electric-cooler current of laser no.1 relative to its maximum value in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser3TecRelHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.144 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Thermo-electric-cooler current of laser no.1 high warning threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser3TecRelHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.145 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Thermo-electric-cooler current of laser no.1 high alarm threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser3TemperatureLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.146 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 low alarm threshold in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser3TemperatureLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.147 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 low warning threshold in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser3TemperatureValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.148 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser3TemperatureHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.149 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 high warning threshold in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser3TemperatureHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.150 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 high alarm threshold in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser3VoltageLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.151 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 low alarm threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser3VoltageLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.152 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 low warning threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser3VoltageValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.153 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser3VoltageHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.154 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 high warning threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser3VoltageHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.155 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 high alarm threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser4CurrentRelLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.161 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Relative laser no.1 current low alarm threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser4CurrentRelLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.162 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Relative laser no.1 current low warning threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser4CurrentRelValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.163 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory The laser no.1 current relative to the current at begin of life in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser4CurrentRelHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.164 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Relative laser no.1 current high warning threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser4CurrentRelHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.165 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Relative laser no.1 current high alarm threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser4TecRelLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.166 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Thermo-electric-cooler current of laser no.1 low alarm threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser4TecRelLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.167 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Thermo-electric-cooler current of laser no.1 low warning threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser4TecRelValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.168 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory The thermo-electric-cooler current of laser no.1 relative to its maximum value in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser4TecRelHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.169 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Thermo-electric-cooler current of laser no.1 high warning threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser4TecRelHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.170 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Thermo-electric-cooler current of laser no.1 high alarm threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser4TemperatureLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.171 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 low alarm threshold in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser4TemperatureLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.172 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 low warning threshold in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser4TemperatureValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.173 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser4TemperatureHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.174 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 high warning threshold in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser4TemperatureHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.175 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 high alarm threshold in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser4VoltageLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.176 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 low alarm threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser4VoltageLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.177 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 low warning threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser4VoltageValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.178 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser4VoltageHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.179 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 high warning threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser4VoltageHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.180 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 high alarm threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser5CurrentRelLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.186 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Relative laser no.1 current low alarm threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser5CurrentRelLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.187 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Relative laser no.1 current low warning threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser5CurrentRelValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.188 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory The laser no.1 current relative to the current at begin of life in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser5CurrentRelHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.189 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Relative laser no.1 current high warning threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser5CurrentRelHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.190 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Relative laser no.1 current high alarm threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser5TecRelLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.191 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Thermo-electric-cooler current of laser no.1 low alarm threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser5TecRelLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.192 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Thermo-electric-cooler current of laser no.1 low warning threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser5TecRelValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.193 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory The thermo-electric-cooler current of laser no.1 relative to its maximum value in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser5TecRelHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.194 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Thermo-electric-cooler current of laser no.1 high warning threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser5TecRelHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.195 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Thermo-electric-cooler current of laser no.1 high alarm threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser5TemperatureLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.196 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 low alarm threshold in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser5TemperatureLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.197 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 low warning threshold in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser5TemperatureValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.198 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser5TemperatureHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.199 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 high warning threshold in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser5TemperatureHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.200 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 high alarm threshold in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser5VoltageLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.201 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 low alarm threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser5VoltageLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.202 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 low warning threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser5VoltageValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.203 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser5VoltageHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.204 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 high warning threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser5VoltageHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.205 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 high alarm threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser6CurrentRelLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.211 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Relative laser no.1 current low alarm threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser6CurrentRelLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.212 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Relative laser no.1 current low warning threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser6CurrentRelValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.213 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory The laser no.1 current relative to the current at begin of life in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser6CurrentRelHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.214 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Relative laser no.1 current high warning threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser6CurrentRelHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.215 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Relative laser no.1 current high alarm threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser6TecRelLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.216 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Thermo-electric-cooler current of laser no.1 low alarm threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser6TecRelLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.217 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Thermo-electric-cooler current of laser no.1 low warning threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser6TecRelValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.218 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory The thermo-electric-cooler current of laser no.1 relative to its maximum value in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser6TecRelHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.219 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Thermo-electric-cooler current of laser no.1 high warning threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser6TecRelHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.220 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Thermo-electric-cooler current of laser no.1 high alarm threshold in steps of 0.1%. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser6TemperatureLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.221 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 low alarm threshold in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser6TemperatureLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.222 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 low warning threshold in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser6TemperatureValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.223 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser6TemperatureHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.224 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 high warning threshold in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser6TemperatureHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.225 | INTEGER | RO | mandatory | 0 | ||||||||
column · INTEGER · read-only · mandatory Temperature of laser no.1 high alarm threshold in steps of 0.1 Celsius Degrees. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser6VoltageLoLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.226 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 low alarm threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser6VoltageLo | 1.3.6.1.4.1.7501.1.2.116.5.1.1.227 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 low warning threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser6VoltageValue | 1.3.6.1.4.1.7501.1.2.116.5.1.1.228 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser6VoltageHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.229 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 high warning threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| CoaLaser6VoltageHiHi | 1.3.6.1.4.1.7501.1.2.116.5.1.1.230 | INTEGER | RO | optional | 0 | ||||||||
column · INTEGER · read-only · optional The supply voltage of laser no.1 high alarm threshold in steps of 0.1 Volts. Example values from LibreNMS test devices
| |||||||||||||
| NoaDisplay | 1.3.6.1.4.1.7501.1.2.116.6 | ||||||||||||
| ToaDisplayTable | 1.3.6.1.4.1.7501.1.2.116.6.1 | NA | mandatory | ||||||||||
| RoaDisplayEntry | 1.3.6.1.4.1.7501.1.2.116.6.1.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory
| |||||||||||||
| CoaDisplayNumberOfLasers | 1.3.6.1.4.1.7501.1.2.116.6.1.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The number of lasers used by this optical amplifier | |||||||||||||
| CoaDisplayNumberOfInternalVoltages | 1.3.6.1.4.1.7501.1.2.116.6.1.1.2 | INTEGER | RO | optional | |||||||||
column · INTEGER · read-only · optional The number of internal voltages monitored by this optical amplifier | |||||||||||||
| CoaDisplayExtIOSupported | 1.3.6.1.4.1.7501.1.2.116.6.1.1.3 | TruthValue | RO | mandatory | |||||||||
column · TruthValue · read-only · mandatory Return 'true(1)' if external I/O feature is supported by the device. | |||||||||||||
| CoaDisplaySbsSupported | 1.3.6.1.4.1.7501.1.2.116.6.1.1.4 | TruthValue | RO | mandatory | |||||||||
column · TruthValue · read-only · mandatory Return 'true(1)' if SBS feature is supported by the device. | |||||||||||||
| CoaDisplayReturnLossSupported | 1.3.6.1.4.1.7501.1.2.116.6.1.1.5 | TruthValue | RO | mandatory | |||||||||
column · TruthValue · read-only · mandatory Return 'true(1)' if ReturnLoss feature is supported by the device. | |||||||||||||
| CoaDisplaySbsEvaluatedThreshold | 1.3.6.1.4.1.7501.1.2.116.6.1.1.6 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The evaluated SBS output power or gain threshold in 0.1 dB(m) units. Not supported by all optical amplifiers | |||||||||||||
| CoaDisplaySbsLastEvaluationState | 1.3.6.1.4.1.7501.1.2.116.6.1.1.7 | SbsEvaluationState | RO | mandatory | |||||||||
column · SbsEvaluationState · read-only · mandatory The result of last SBS threshold evaluation process. Returns 'evaluationNotSupported(1)' if SBS threshold evaluation is not supported by this optical amplifier | |||||||||||||
| CoaDisplaySbsLastEvaluationTime | 1.3.6.1.4.1.7501.1.2.116.6.1.1.8 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The time of last successfull SBS threshold evaluation process. Not supported by all optical amplifiers | |||||||||||||
| CoaDisplayOutputPwrOrGainNominal | 1.3.6.1.4.1.7501.1.2.116.6.1.1.9 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The nominal value of output power (or gain) in 0.1 dB(m) units. See oaConfigRegulationMode variable too | |||||||||||||
| CoaDisplayOutputPwrOrGainAdjusted | 1.3.6.1.4.1.7501.1.2.116.6.1.1.10 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The adjusted desired value of output power (or gain) in 0.1 dB(m) units. See oaConfigRegulationMode variable too | |||||||||||||
| CoaDisplayInputVoltageNominal | 1.3.6.1.4.1.7501.1.2.116.6.1.1.11 | INTEGER | RO | optional | |||||||||
column · INTEGER · read-only · optional The nominal value of input voltage in 0.1 V units. | |||||||||||||
| CoaDisplayInternalVoltage1Nominal | 1.3.6.1.4.1.7501.1.2.116.6.1.1.12 | INTEGER | RO | optional | |||||||||
column · INTEGER · read-only · optional The nominal value of internal voltage no. 1 in 0.1 V units. | |||||||||||||
| CoaDisplayInternalVoltage2Nominal | 1.3.6.1.4.1.7501.1.2.116.6.1.1.13 | INTEGER | RO | optional | |||||||||
column · INTEGER · read-only · optional The nominal value of internal voltage no. 2 in 0.1 V units. | |||||||||||||
| CoaDisplayInternalVoltage3Nominal | 1.3.6.1.4.1.7501.1.2.116.6.1.1.14 | INTEGER | RO | optional | |||||||||
column · INTEGER · read-only · optional The nominal value of internal voltage no. 3 in 0.1 V units. | |||||||||||||
| CoaDisplayLaser1VoltageNominal | 1.3.6.1.4.1.7501.1.2.116.6.1.1.20 | INTEGER | RO | optional | |||||||||
column · INTEGER · read-only · optional The nominal supply voltage of laser no.1 in 0.1 V units. | |||||||||||||
| CoaDisplayLaser2VoltageNominal | 1.3.6.1.4.1.7501.1.2.116.6.1.1.21 | INTEGER | RO | optional | |||||||||
column · INTEGER · read-only · optional The nominal supply voltage of laser no.2 in 0.1 V units. | |||||||||||||
| CoaDisplayLaser3VoltageNominal | 1.3.6.1.4.1.7501.1.2.116.6.1.1.22 | INTEGER | RO | optional | |||||||||
column · INTEGER · read-only · optional The nominal supply voltage of laser no.3 in 0.1 V units. | |||||||||||||
| CoaDisplayLaser4VoltageNominal | 1.3.6.1.4.1.7501.1.2.116.6.1.1.23 | INTEGER | RO | optional | |||||||||
column · INTEGER · read-only · optional The nominal supply voltage of laser no.4 in 0.1 V units. | |||||||||||||
| CoaDisplayLaser5VoltageNominal | 1.3.6.1.4.1.7501.1.2.116.6.1.1.24 | INTEGER | RO | optional | |||||||||
column · INTEGER · read-only · optional The nominal supply voltage of laser no.5 in 0.1 V units. | |||||||||||||
| CoaDisplayLaser6VoltageNominal | 1.3.6.1.4.1.7501.1.2.116.6.1.1.25 | INTEGER | RO | optional | |||||||||
column · INTEGER · read-only · optional The nominal supply voltage of laser no.6 in 0.1 V units. | |||||||||||||
| CoaDisplayLaser1PumpPowerRel | 1.3.6.1.4.1.7501.1.2.116.6.1.1.30 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The pump power of laser no.1 in steps of 0.1% | |||||||||||||
| CoaDisplayLaser2PumpPowerRel | 1.3.6.1.4.1.7501.1.2.116.6.1.1.31 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The pump power of laser no.2 in steps of 0.1% | |||||||||||||
| CoaDisplayLaser3PumpPowerRel | 1.3.6.1.4.1.7501.1.2.116.6.1.1.32 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The pump power of laser no.3 in steps of 0.1% | |||||||||||||
| CoaDisplayLaser4PumpPowerRel | 1.3.6.1.4.1.7501.1.2.116.6.1.1.33 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The pump power of laser no.4 in steps of 0.1% | |||||||||||||
| CoaDisplayLaser5PumpPowerRel | 1.3.6.1.4.1.7501.1.2.116.6.1.1.34 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The pump power of laser no.5 in steps of 0.1% | |||||||||||||
| CoaDisplayLaser6PumpPowerRel | 1.3.6.1.4.1.7501.1.2.116.6.1.1.35 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The pump power of laser no.6 in steps of 0.1% | |||||||||||||
| CoaDisplayLaser1FeaturesSupported | 1.3.6.1.4.1.7501.1.2.116.6.1.1.40 | LaserFeatures | RO | mandatory | |||||||||
column · LaserFeatures · read-only · mandatory The features supported by laser no.1 A bitfield containing the features supplied by this laser. Note that laserCurrent is always supplied. | |||||||||||||
| CoaDisplayLaser2FeaturesSupported | 1.3.6.1.4.1.7501.1.2.116.6.1.1.41 | LaserFeatures | RO | mandatory | |||||||||
column · LaserFeatures · read-only · mandatory The features supported by laser no.2 | |||||||||||||
| CoaDisplayLaser3FeaturesSupported | 1.3.6.1.4.1.7501.1.2.116.6.1.1.42 | LaserFeatures | RO | mandatory | |||||||||
column · LaserFeatures · read-only · mandatory The features supported by laser no.3 | |||||||||||||
| CoaDisplayLaser4FeaturesSupported | 1.3.6.1.4.1.7501.1.2.116.6.1.1.43 | LaserFeatures | RO | mandatory | |||||||||
column · LaserFeatures · read-only · mandatory The features supported by laser no.4 | |||||||||||||
| CoaDisplayLaser5FeaturesSupported | 1.3.6.1.4.1.7501.1.2.116.6.1.1.44 | LaserFeatures | RO | mandatory | |||||||||
column · LaserFeatures · read-only · mandatory The features supported by laser no.5 | |||||||||||||
| CoaDisplayLaser6FeaturesSupported | 1.3.6.1.4.1.7501.1.2.116.6.1.1.45 | LaserFeatures | RO | mandatory | |||||||||
column · LaserFeatures · read-only · mandatory The features supported by laser no.6 | |||||||||||||
| CoaDisplayAmplifierIsRamanType | 1.3.6.1.4.1.7501.1.2.116.6.1.1.50 | TruthValue | RO | mandatory | |||||||||
column · TruthValue · read-only · mandatory Returns true(1) if this amplifier is of RAMAN type | |||||||||||||