BKTEL-HFC862-NECE-MIB
HUBER+SUHNER BKtel GmbH (HFC)snmptranslate -m BKTEL-HFC862-NECE-MIB -Tpsnmpwalk -v2c -c <community> -m BKTEL-HFC862-NECE-MIB <host> 1.3.6.1.4.1.7501.1.2.100Imports
| BKTEL-HFC862-BASE-MIB | DisplayString, ModuleWidthValue, NESlotValue, PerceivedSeverityValue, TruthValue, modules |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, Unsigned32, enterprises, experimental, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Nnece | 1.3.6.1.4.1.7501.1.2.100 | |||
| NneceCommon | 1.3.6.1.4.1.7501.1.2.100.1 | |||
| SneceCommonNumberOfModules | 1.3.6.1.4.1.7501.1.2.100.1.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Number of modules in table. | ||||
| TneceCommonTable | 1.3.6.1.4.1.7501.1.2.100.1.2 | NA | mandatory | |
table · not-accessible · mandatory The table contains all modules of the nece-type in the NE | ||||
| RneceCommonEntry | 1.3.6.1.4.1.7501.1.2.100.1.2.1 | NA | mandatory | |
| CneceNESlot | 1.3.6.1.4.1.7501.1.2.100.1.2.1.1 | NESlotValue | RO | mandatory |
column · NESlotValue · read-only · mandatory The virtual slotID | ||||
| CneceCommonType | 1.3.6.1.4.1.7501.1.2.100.1.2.1.2 | DisplayString (SIZE (0..32)) | RO | mandatory |
column · DisplayString (SIZE (0..32)) · read-only · mandatory Module model name | ||||
| CneceCommonDescr | 1.3.6.1.4.1.7501.1.2.100.1.2.1.3 | DisplayString | RW | mandatory |
column · DisplayString · read-write · mandatory Module alias name | ||||
| CneceCommonFirmwareId | 1.3.6.1.4.1.7501.1.2.100.1.2.1.4 | DisplayString (SIZE (0..32)) | RO | mandatory |
column · DisplayString (SIZE (0..32)) · read-only · mandatory Module firmware version | ||||
| CneceCommonModuleWidth | 1.3.6.1.4.1.7501.1.2.100.1.2.1.5 | ModuleWidthValue | RO | optional |
column · ModuleWidthValue · read-only · optional The width of the module. | ||||
| NneceStates | 1.3.6.1.4.1.7501.1.2.100.2 | |||
| TneceStatesTable | 1.3.6.1.4.1.7501.1.2.100.2.1 | NA | mandatory | |
| RneceStatesEntry | 1.3.6.1.4.1.7501.1.2.100.2.1.1 | NA | mandatory | |
| CneceStatesGpInput1 | 1.3.6.1.4.1.7501.1.2.100.2.1.1.1 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory State of general purpose input no. 1. | ||||
| CneceStatesGpInput2 | 1.3.6.1.4.1.7501.1.2.100.2.1.1.2 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory State of general purpose input no. 2. | ||||
| CneceStatesGpInput3 | 1.3.6.1.4.1.7501.1.2.100.2.1.1.3 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory State of general purpose input no. 3. | ||||
| CneceStatesGpInput4 | 1.3.6.1.4.1.7501.1.2.100.2.1.1.4 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory State of general purpose input no. 4. | ||||
| CneceStatesGpInput5 | 1.3.6.1.4.1.7501.1.2.100.2.1.1.5 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory State of general purpose input no. 5. | ||||
| CneceStatesGpInput6 | 1.3.6.1.4.1.7501.1.2.100.2.1.1.6 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory State of general purpose input no. 6. | ||||
| CneceStatesGpInput7 | 1.3.6.1.4.1.7501.1.2.100.2.1.1.7 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory State of general purpose input no. 7. | ||||
| CneceStatesGpInput8 | 1.3.6.1.4.1.7501.1.2.100.2.1.1.8 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory State of general purpose input no. 8. | ||||
| CneceStatesGpInput9 | 1.3.6.1.4.1.7501.1.2.100.2.1.1.9 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory State of general purpose input no. 9. | ||||
| CneceStatesGpInput10 | 1.3.6.1.4.1.7501.1.2.100.2.1.1.10 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory State of general purpose input no. 10. | ||||
| CneceStatesGpInput11 | 1.3.6.1.4.1.7501.1.2.100.2.1.1.11 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory State of general purpose input no. 11. | ||||
| CneceStatesGpInput12 | 1.3.6.1.4.1.7501.1.2.100.2.1.1.12 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory State of general purpose input no. 12. | ||||
| CneceStatesPowerSupplyLeft | 1.3.6.1.4.1.7501.1.2.100.2.1.1.13 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory The left (looking from front side) power supply unit fails. Only valid for 2G6 Systems !! Non 2G6 Systems always report clear(5) | ||||
| CneceStatesPowerSupplyRight | 1.3.6.1.4.1.7501.1.2.100.2.1.1.14 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory The right (looking from front side) power supply unit fails. Only valid for 2G6 Systems !! Non 2G6 Systems always report clear(5) | ||||
| CneceStatesFanLeft | 1.3.6.1.4.1.7501.1.2.100.2.1.1.15 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory The left (looking from front side) fan unit fails. Only valid for 2G6 Systems !! Non 2G6 Systems always report clear(5) | ||||
| CneceStatesFanRight | 1.3.6.1.4.1.7501.1.2.100.2.1.1.16 | PerceivedSeverityValue | RO | mandatory |
column · PerceivedSeverityValue · read-only · mandatory The right (looking from front side) fan unit fails. Only valid for 2G6 Systems !! Non 2G6 Systems always report clear(5) | ||||
| NneceConfiguration | 1.3.6.1.4.1.7501.1.2.100.3 | |||
| TneceConfigurationTable | 1.3.6.1.4.1.7501.1.2.100.3.1 | NA | mandatory | |
| RneceConfigurationEntry | 1.3.6.1.4.1.7501.1.2.100.3.1.1 | NA | mandatory | |
row · not-accessible · mandatory
| ||||
| CneceConfigGpio1Type | 1.3.6.1.4.1.7501.1.2.100.3.1.1.1 | GpioType | RO | mandatory |
column · GpioType · read-only · mandatory The type of the general purpose port no. 1 | ||||
| CneceConfigGpio1Mode | 1.3.6.1.4.1.7501.1.2.100.3.1.1.2 | GpioMode | RW | mandatory |
column · GpioMode · read-write · mandatory The mode of the general purpose port no. 1 | ||||
| CneceConfigGpio1LogicLevel | 1.3.6.1.4.1.7501.1.2.100.3.1.1.3 | GpioLogicLevel | RW | mandatory |
column · GpioLogicLevel · read-write · mandatory The logic level of the general purpose port no. 1 | ||||
| CneceConfigGpio1Description | 1.3.6.1.4.1.7501.1.2.100.3.1.1.4 | DisplayString (SIZE (0..31)) | RW | mandatory |
column · DisplayString (SIZE (0..31)) · read-write · mandatory A description for the general purpose port no. 1 | ||||
| CneceConfigGpio2Type | 1.3.6.1.4.1.7501.1.2.100.3.1.1.5 | GpioType | RO | mandatory |
column · GpioType · read-only · mandatory The type of the general purpose port no. 2 | ||||
| CneceConfigGpio2Mode | 1.3.6.1.4.1.7501.1.2.100.3.1.1.6 | GpioMode | RW | mandatory |
column · GpioMode · read-write · mandatory The mode of the general purpose port no. 2 | ||||
| CneceConfigGpio2LogicLevel | 1.3.6.1.4.1.7501.1.2.100.3.1.1.7 | GpioLogicLevel | RW | mandatory |
column · GpioLogicLevel · read-write · mandatory The logic level of the general purpose port no. 2 | ||||
| CneceConfigGpio2Description | 1.3.6.1.4.1.7501.1.2.100.3.1.1.8 | DisplayString (SIZE (0..31)) | RW | mandatory |
column · DisplayString (SIZE (0..31)) · read-write · mandatory A description for the general purpose port no. 2 | ||||
| CneceConfigGpio3Type | 1.3.6.1.4.1.7501.1.2.100.3.1.1.9 | GpioType | RO | mandatory |
column · GpioType · read-only · mandatory The type of the general purpose port no. 3 | ||||
| CneceConfigGpio3Mode | 1.3.6.1.4.1.7501.1.2.100.3.1.1.10 | GpioMode | RW | mandatory |
column · GpioMode · read-write · mandatory The mode of the general purpose port no. 3 | ||||
| CneceConfigGpio3LogicLevel | 1.3.6.1.4.1.7501.1.2.100.3.1.1.11 | GpioLogicLevel | RW | mandatory |
column · GpioLogicLevel · read-write · mandatory The logic level of the general purpose port no. 3 | ||||
| CneceConfigGpio3Description | 1.3.6.1.4.1.7501.1.2.100.3.1.1.12 | DisplayString (SIZE (0..31)) | RW | mandatory |
column · DisplayString (SIZE (0..31)) · read-write · mandatory A description for the general purpose port no. 3 | ||||
| CneceConfigGpio4Type | 1.3.6.1.4.1.7501.1.2.100.3.1.1.13 | GpioType | RO | mandatory |
column · GpioType · read-only · mandatory The type of the general purpose port no. 4 | ||||
| CneceConfigGpio4Mode | 1.3.6.1.4.1.7501.1.2.100.3.1.1.14 | GpioMode | RW | mandatory |
column · GpioMode · read-write · mandatory The mode of the general purpose port no. 4 | ||||
| CneceConfigGpio4LogicLevel | 1.3.6.1.4.1.7501.1.2.100.3.1.1.15 | GpioLogicLevel | RW | mandatory |
column · GpioLogicLevel · read-write · mandatory The logic level of the general purpose port no. 4 | ||||
| CneceConfigGpio4Description | 1.3.6.1.4.1.7501.1.2.100.3.1.1.16 | DisplayString (SIZE (0..31)) | RW | mandatory |
column · DisplayString (SIZE (0..31)) · read-write · mandatory A description for the general purpose port no. 4 | ||||
| CneceConfigGpio5Type | 1.3.6.1.4.1.7501.1.2.100.3.1.1.17 | GpioType | RO | mandatory |
column · GpioType · read-only · mandatory The type of the general purpose port no. 5 | ||||
| CneceConfigGpio5Mode | 1.3.6.1.4.1.7501.1.2.100.3.1.1.18 | GpioMode | RW | mandatory |
column · GpioMode · read-write · mandatory The mode of the general purpose port no. 5 | ||||
| CneceConfigGpio5LogicLevel | 1.3.6.1.4.1.7501.1.2.100.3.1.1.19 | GpioLogicLevel | RW | mandatory |
column · GpioLogicLevel · read-write · mandatory The logic level of the general purpose port no. 5 | ||||
| CneceConfigGpio5Description | 1.3.6.1.4.1.7501.1.2.100.3.1.1.20 | DisplayString (SIZE (0..31)) | RW | mandatory |
column · DisplayString (SIZE (0..31)) · read-write · mandatory A description for the general purpose port no. 5 | ||||
| CneceConfigGpio6Type | 1.3.6.1.4.1.7501.1.2.100.3.1.1.21 | GpioType | RO | mandatory |
column · GpioType · read-only · mandatory The type of the general purpose port no. 6 | ||||
| CneceConfigGpio6Mode | 1.3.6.1.4.1.7501.1.2.100.3.1.1.22 | GpioMode | RW | mandatory |
column · GpioMode · read-write · mandatory The mode of the general purpose port no. 6 | ||||
| CneceConfigGpio6LogicLevel | 1.3.6.1.4.1.7501.1.2.100.3.1.1.23 | GpioLogicLevel | RW | mandatory |
column · GpioLogicLevel · read-write · mandatory The logic level of the general purpose port no. 6 | ||||
| CneceConfigGpio6Description | 1.3.6.1.4.1.7501.1.2.100.3.1.1.24 | DisplayString (SIZE (0..31)) | RW | mandatory |
column · DisplayString (SIZE (0..31)) · read-write · mandatory A description for the general purpose port no. 6 | ||||
| CneceConfigGpio7Type | 1.3.6.1.4.1.7501.1.2.100.3.1.1.25 | GpioType | RO | mandatory |
column · GpioType · read-only · mandatory The type of the general purpose port no. 7 | ||||
| CneceConfigGpio7Mode | 1.3.6.1.4.1.7501.1.2.100.3.1.1.26 | GpioMode | RW | mandatory |
column · GpioMode · read-write · mandatory The mode of the general purpose port no. 7 | ||||
| CneceConfigGpio7LogicLevel | 1.3.6.1.4.1.7501.1.2.100.3.1.1.27 | GpioLogicLevel | RW | mandatory |
column · GpioLogicLevel · read-write · mandatory The logic level of the general purpose port no. 7 | ||||
| CneceConfigGpio7Description | 1.3.6.1.4.1.7501.1.2.100.3.1.1.28 | DisplayString (SIZE (0..31)) | RW | mandatory |
column · DisplayString (SIZE (0..31)) · read-write · mandatory A description for the general purpose port no. 7 | ||||
| CneceConfigGpio8Type | 1.3.6.1.4.1.7501.1.2.100.3.1.1.29 | GpioType | RO | mandatory |
column · GpioType · read-only · mandatory The type of the general purpose port no. 8 | ||||
| CneceConfigGpio8Mode | 1.3.6.1.4.1.7501.1.2.100.3.1.1.30 | GpioMode | RW | mandatory |
column · GpioMode · read-write · mandatory The mode of the general purpose port no. 8 | ||||
| CneceConfigGpio8LogicLevel | 1.3.6.1.4.1.7501.1.2.100.3.1.1.31 | GpioLogicLevel | RW | mandatory |
column · GpioLogicLevel · read-write · mandatory The logic level of the general purpose port no. 8 | ||||
| CneceConfigGpio8Description | 1.3.6.1.4.1.7501.1.2.100.3.1.1.32 | DisplayString (SIZE (0..31)) | RW | mandatory |
column · DisplayString (SIZE (0..31)) · read-write · mandatory A description for the general purpose port no. 8 | ||||
| CneceConfigGpio9Type | 1.3.6.1.4.1.7501.1.2.100.3.1.1.33 | GpioType | RO | mandatory |
column · GpioType · read-only · mandatory The type of the general purpose port no. 9 | ||||
| CneceConfigGpio9Mode | 1.3.6.1.4.1.7501.1.2.100.3.1.1.34 | GpioMode | RW | mandatory |
column · GpioMode · read-write · mandatory The mode of the general purpose port no. 9 | ||||
| CneceConfigGpio9LogicLevel | 1.3.6.1.4.1.7501.1.2.100.3.1.1.35 | GpioLogicLevel | RW | mandatory |
column · GpioLogicLevel · read-write · mandatory The logic level of the general purpose port no. 9 | ||||
| CneceConfigGpio9Description | 1.3.6.1.4.1.7501.1.2.100.3.1.1.36 | DisplayString (SIZE (0..31)) | RW | mandatory |
column · DisplayString (SIZE (0..31)) · read-write · mandatory A description for the general purpose port no. 9 | ||||
| CneceConfigGpio10Type | 1.3.6.1.4.1.7501.1.2.100.3.1.1.37 | GpioType | RO | mandatory |
column · GpioType · read-only · mandatory The type of the general purpose port no. 10 | ||||
| CneceConfigGpio10Mode | 1.3.6.1.4.1.7501.1.2.100.3.1.1.38 | GpioMode | RW | mandatory |
column · GpioMode · read-write · mandatory The mode of the general purpose port no. 10 | ||||
| CneceConfigGpio10LogicLevel | 1.3.6.1.4.1.7501.1.2.100.3.1.1.39 | GpioLogicLevel | RW | mandatory |
column · GpioLogicLevel · read-write · mandatory The logic level of the general purpose port no. 10 | ||||
| CneceConfigGpio10Description | 1.3.6.1.4.1.7501.1.2.100.3.1.1.40 | DisplayString (SIZE (0..31)) | RW | mandatory |
column · DisplayString (SIZE (0..31)) · read-write · mandatory A description for the general purpose port no. 10 | ||||
| CneceConfigGpio11Type | 1.3.6.1.4.1.7501.1.2.100.3.1.1.41 | GpioType | RO | mandatory |
column · GpioType · read-only · mandatory The type of the general purpose port no. 11 | ||||
| CneceConfigGpio11Mode | 1.3.6.1.4.1.7501.1.2.100.3.1.1.42 | GpioMode | RW | mandatory |
column · GpioMode · read-write · mandatory The mode of the general purpose port no. 11 | ||||
| CneceConfigGpio11LogicLevel | 1.3.6.1.4.1.7501.1.2.100.3.1.1.43 | GpioLogicLevel | RW | mandatory |
column · GpioLogicLevel · read-write · mandatory The logic level of the general purpose port no. 11 | ||||
| CneceConfigGpio11Description | 1.3.6.1.4.1.7501.1.2.100.3.1.1.44 | DisplayString (SIZE (0..31)) | RW | mandatory |
column · DisplayString (SIZE (0..31)) · read-write · mandatory A description for the general purpose port no. 11 | ||||
| CneceConfigGpio12Type | 1.3.6.1.4.1.7501.1.2.100.3.1.1.45 | GpioType | RO | mandatory |
column · GpioType · read-only · mandatory The type of the general purpose port no. 12 | ||||
| CneceConfigGpio12Mode | 1.3.6.1.4.1.7501.1.2.100.3.1.1.46 | GpioMode | RW | mandatory |
column · GpioMode · read-write · mandatory The mode of the general purpose port no. 12 | ||||
| CneceConfigGpio12LogicLevel | 1.3.6.1.4.1.7501.1.2.100.3.1.1.47 | GpioLogicLevel | RW | mandatory |
column · GpioLogicLevel · read-write · mandatory The logic level of the general purpose port no. 12 | ||||
| CneceConfigGpio12Description | 1.3.6.1.4.1.7501.1.2.100.3.1.1.48 | DisplayString (SIZE (0..31)) | RW | mandatory |
column · DisplayString (SIZE (0..31)) · read-write · mandatory A description for the general purpose port no. 12 | ||||
| CneceConfigNESlotWrite | 1.3.6.1.4.1.7501.1.2.100.3.1.1.49 | NESlotWriteValue | RW | optional |
column · NESlotWriteValue · read-write · optional By writing this variable a slot can be assigned for devices that dont support hardware slot detection. Reading '-1' means that the slot position is NOT writable. | ||||
| CneceConfigIpAddress | 1.3.6.1.4.1.7501.1.2.100.3.1.1.50 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The ip address of the NEC. NOTE: The NECE executes a reset if this parameter gets changed | ||||
| CneceConfigNetmask | 1.3.6.1.4.1.7501.1.2.100.3.1.1.51 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The netmask of the NEC. NOTE: The NECE executes a reset if this parameter gets changed | ||||
| CneceConfigDefaultrouter | 1.3.6.1.4.1.7501.1.2.100.3.1.1.52 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The default router of the NEC. NOTE: The NECE executes a reset if this parameter gets changed | ||||
| CneceConfigTrapReceiver1HostIp | 1.3.6.1.4.1.7501.1.2.100.3.1.1.53 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The ip address of the host no.1 that should receive traps Address 0.0.0.0 disables the trap. Broad- or multicast addresses are not allowed | ||||
| CneceConfigTrapReceiver1Community | 1.3.6.1.4.1.7501.1.2.100.3.1.1.54 | DisplayString (SIZE (4..31)) | RW | mandatory |
column · DisplayString (SIZE (4..31)) · read-write · mandatory The community name used for traps to host no.1 | ||||
| CneceConfigTrapReceiver2HostIp | 1.3.6.1.4.1.7501.1.2.100.3.1.1.55 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The ip address of the host no.2 that should receive traps Address 0.0.0.0 disables the trap. Broad- or multicast addresses are not allowed | ||||
| CneceConfigTrapReceiver2to4Community | 1.3.6.1.4.1.7501.1.2.100.3.1.1.56 | DisplayString (SIZE (4..31)) | RW | mandatory |
column · DisplayString (SIZE (4..31)) · read-write · mandatory The community name used for traps to hosts no.2 to no.4 | ||||
| CneceConfigTrapReceiver3HostIp | 1.3.6.1.4.1.7501.1.2.100.3.1.1.57 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The ip address of the host no.3 that should receive traps Address 0.0.0.0 disables the trap. Broad- or multicast addresses are not allowed NOTE: The community name 'neceConfigTrapReceiver2to4Community' is used for this trap receiver no. 3 | ||||
| CneceConfigTrapReceiver4HostIp | 1.3.6.1.4.1.7501.1.2.100.3.1.1.58 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The ip address of the host no.4 that should receive traps Address 0.0.0.0 disables the trap. Broad- or multicast addresses are not allowed NOTE: The community name 'neceConfigTrapReceiver2to4Community' is used for this trap receiver no. 4 | ||||
| CneceConfigGetCommunity | 1.3.6.1.4.1.7501.1.2.100.3.1.1.59 | DisplayString (SIZE (0..15)) | RW | mandatory |
column · DisplayString (SIZE (0..15)) · read-write · mandatory The community name that is allowed for GET requests NOTES: - By writing 'neceConfigGetCommunity' AND 'neceConfigSetCommunity' to an empty string of size 0, the default community settings are used. | ||||
| CneceConfigSetCommunity | 1.3.6.1.4.1.7501.1.2.100.3.1.1.60 | DisplayString (SIZE (0..15)) | RW | mandatory |
column · DisplayString (SIZE (0..15)) · read-write · mandatory The community name that is allowed for SET and GET requests NOTES: - By writing 'neceConfigGetCommunity' AND 'neceConfigSetCommunity' to an empty string of size 0, the default community settings are used. | ||||
| CneceConfigTrapReceiverVerify | 1.3.6.1.4.1.7501.1.2.100.3.1.1.61 | TruthValue | RW | mandatory |
column · TruthValue · read-write · mandatory If TRUE, the NECE verifies if the 'sysDescr' variable is readable on host with ip-address 'neceConfigTrapVerifyReceiverIp' before sending new traps. NOTE: The NECE executes a reset if this parameter gets changed | ||||
| CneceConfigTrapVerifyReceiverIp | 1.3.6.1.4.1.7501.1.2.100.3.1.1.62 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The ip address of the host that should receive the 'sysDescr' verify request. Broad- or multicast addresses are not allowed. !!! Only valid if neceConfigTrapReceiverVerify == true(1) !!! | ||||
| CneceConfigTrapVerifyTimeout | 1.3.6.1.4.1.7501.1.2.100.3.1.1.63 | TrapVerifyTimeoutValue | RW | mandatory |
column · TrapVerifyTimeoutValue · read-write · mandatory Timeout in seconds after which the NECE stops trying to verify 'sysDescr'. All pending traps are sent, although no verify response, after that timeout. !!! Only valid if neceConfigTrapReceiverVerify == true(1) !!! | ||||
| CneceConfigTrapAccumulationTime | 1.3.6.1.4.1.7501.1.2.100.3.1.1.64 | TrapAccumulationTimeValue | RW | mandatory |
column · TrapAccumulationTimeValue · read-write · mandatory Time in seconds that the NECE waits before sending all pending traps. NOTE: There are two condition where the NECE sends its pending traps earlier ignoring this accumulation time (of course verifying first): 1) The NECE's internal trap buffer is 3/4 full 2) The NECE's SNMP agent is polled by a request from manager !!! Only valid if neceConfigTrapReceiverVerify == true(1) !!! | ||||
| CneceConfigCableWatchUsed | 1.3.6.1.4.1.7501.1.2.100.3.1.1.65 | TruthValue | RW | mandatory |
column · TruthValue · read-write · mandatory This parameter is obsolete and no more needed, always returns false(2) | ||||
| CneceConfigHmsTrapsCompliance | 1.3.6.1.4.1.7501.1.2.100.3.1.1.66 | HmsTrapsComplianceValue | RW | mandatory |
column · HmsTrapsComplianceValue · read-write · mandatory Set the compliance mode of the SCTE HMS traps In earlier versions of NECE (<= Sw.Rel. 1.10) the trap compliance to the SCTE HMS MIBs was not fully given. See manual for details. | ||||
| CneceConfigHmsNotificationsEnable | 1.3.6.1.4.1.7501.1.2.100.3.1.1.67 | TruthValue | RW | mandatory |
column · TruthValue · read-write · mandatory With this control the user can disable all traps of type NOTIFY and there entries in the SCTE HMS tree. NOTE: The NECE executes a reset if this parameter gets changed | ||||
| CneceConfigHfcInventoryFormat | 1.3.6.1.4.1.7501.1.2.100.3.1.1.68 | HfcInventoryFormatValue | RO | mandatory |
column · HfcInventoryFormatValue · read-only · mandatory Selects the supported format of the hfcInventoryFabricData (T-NOVA-HFC-INVENTORY-MIB) | ||||
| CneceConfigTimezone | 1.3.6.1.4.1.7501.1.2.100.3.1.1.69 | INTEGER (-24..24) | RW | mandatory |
column · INTEGER (-24..24) · read-write · mandatory The timezone in units of half hours from GMT (Greenwich Mean Time). For example: Berlin => +2 half hours means GMT+1 hour Tokio => +18 half hours means GMT+9 hours NewYork => -10 half hours means GMT-5 hours NOTE: Not all NECE's support an NTP server. | ||||
| CneceConfigNtpServerIp | 1.3.6.1.4.1.7501.1.2.100.3.1.1.70 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The ip address of an NTP time server. Setting the ip to 0.0.0.0 disables the time server lookup. NOTE: Not all NECE's support an NTP server. | ||||
| CneceConfigFactoryCommandLine | 1.3.6.1.4.1.7501.1.2.100.3.1.1.71 | OCTET STRING | RW | mandatory |
column · OCTET STRING · read-write · mandatory A factory internal command interface | ||||
| CneceConfigDaylightSavingFrom | 1.3.6.1.4.1.7501.1.2.100.3.1.1.72 | DisplayString | RW | mandatory |
column · DisplayString · read-write · mandatory Daylight saving start time in a special textformat (see manual for detail) | ||||
| CneceConfigDaylightSavingTo | 1.3.6.1.4.1.7501.1.2.100.3.1.1.73 | DisplayString | RW | mandatory |
column · DisplayString · read-write · mandatory Daylight saving end time in a special textformat (see manual for detail) | ||||
| NneceControl | 1.3.6.1.4.1.7501.1.2.100.4 | |||
| TneceControlTable | 1.3.6.1.4.1.7501.1.2.100.4.1 | NA | mandatory | |
| RneceControlEntry | 1.3.6.1.4.1.7501.1.2.100.4.1.1 | NA | mandatory | |
| CneceControlReset | 1.3.6.1.4.1.7501.1.2.100.4.1.1.1 | TruthValue | RW | mandatory |
column · TruthValue · read-write · mandatory Reset the module. | ||||
| NneceMeasuringValues | 1.3.6.1.4.1.7501.1.2.100.5 | |||
| TneceMeasuringValuesTable | 1.3.6.1.4.1.7501.1.2.100.5.1 | NA | mandatory | |
| RneceMeasuringValuesEntry | 1.3.6.1.4.1.7501.1.2.100.5.1.1 | NA | mandatory | |
| CneceTemperatureLoLo | 1.3.6.1.4.1.7501.1.2.100.5.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Temperature low alarm threshold in steps of 0,1°C. | ||||
| CneceTemperatureLo | 1.3.6.1.4.1.7501.1.2.100.5.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Temperature low warning threshold in steps of 0,1°C. | ||||
| CneceTemperatureValue | 1.3.6.1.4.1.7501.1.2.100.5.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Temperature in steps of 0,1°C. | ||||
| CneceTemperatureHi | 1.3.6.1.4.1.7501.1.2.100.5.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Temperature high warning threshold in steps of 0,1°C. | ||||
| CneceTemperatureHiHi | 1.3.6.1.4.1.7501.1.2.100.5.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Temperature high alarm threshold in steps of 0,1°C. | ||||
| NneceDisplay | 1.3.6.1.4.1.7501.1.2.100.6 | |||
| TneceDisplayTable | 1.3.6.1.4.1.7501.1.2.100.6.1 | NA | mandatory | |
| RneceDisplayEntry | 1.3.6.1.4.1.7501.1.2.100.6.1.1 | NA | mandatory | |
row · not-accessible · mandatory
| ||||
| CneceDisplayTrapsSent | 1.3.6.1.4.1.7501.1.2.100.6.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Number of traps that the NECE has sent. | ||||
| CneceDisplayTrapsDiscarded | 1.3.6.1.4.1.7501.1.2.100.6.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Number of traps that the NECE has discarded. Discarded traps occur because of trap buffer overflow or timeouts. | ||||