BENU-CHASSIS-MIB
Benu Networks, Inc.Initial creation MIB module for Benu Networks Chassis. Copyright (C) 2001, 2008 by Benu Networks, Inc. All rights reserved.
snmptranslate -m BENU-CHASSIS-MIB -Tpsnmpwalk -v2c -c <community> -m BENU-CHASSIS-MIB <host> 1.3.6.1.4.1.39406.1.1Imports
| BENU-PLATFORM-MIB | benuPlatform |
|---|---|
| IF-MIB | ifAdminStatus, ifDescr, ifIndex, ifOperStatus, ifType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IbenuChassisMIB | 1.3.6.1.4.1.39406.1.1 | |||
identity Initial creation MIB module for Benu Networks Chassis. Copyright (C) 2001, 2008 by Benu Networks, Inc. All rights reserved. | ||||
| NbenuChassisNotifObjects | 1.3.6.1.4.1.39406.1.1.0 | |||
| !benuChassisPowerFailure | 1.3.6.1.4.1.39406.1.1.0.1 | obsolete | ||
notification · obsolete A chassisPowerFailureTrap is generated when a Power Failure is detected in the system | ||||
| !benuChassisFanFailureTrap | 1.3.6.1.4.1.39406.1.1.0.2 | |||
notification · current A chassisFanFailureTrap is generated when a Fan Failure is detected in the system
| ||||
| !benuLinkUpTrap | 1.3.6.1.4.1.39406.1.1.0.3 | |||
notification · current A proprietary Link Up Notification for all interfaces. This notification contains more details than the standard 'linkUp' notification in RFC 2863.
| ||||
| !benuLinkDownTrap | 1.3.6.1.4.1.39406.1.1.0.4 | |||
notification · current A proprietary Link Down Notification for all interfaces. This notification contains more details than the standard 'linkDown' notification in RFC 2863.
| ||||
| !benuSensorCritical | 1.3.6.1.4.1.39406.1.1.0.5 | |||
notification · current This notification signifies the transition of the sensor state from normal to critical. | ||||
| !benuSensorNormal | 1.3.6.1.4.1.39406.1.1.0.6 | |||
notification · current This notification signifies the transition of the sensor state from critical to normal. | ||||
| !benuChassisPowerFault | 1.3.6.1.4.1.39406.1.1.0.7 | |||
notification · current A chassisPowerFaultTrap is generated when a Power Failure is detected in the system
| ||||
| !benuChassisPowerRecovery | 1.3.6.1.4.1.39406.1.1.0.8 | |||
notification · current A chassisPowerRecoveryTrap is generated when a failed Power supply recovery is detected in the system
| ||||
| !benuChassisPowerPresent | 1.3.6.1.4.1.39406.1.1.0.9 | |||
notification · current A chassisPowerPresentTrap is generated when a redundant Power supply is inserted in the system
| ||||
| !benuChassisPowerAbsent | 1.3.6.1.4.1.39406.1.1.0.10 | |||
notification · current A chassisPowerAbsentTrap is generated when a redundant Power supply is removed from the system
| ||||
| NbenuChassisMIBObjects | 1.3.6.1.4.1.39406.1.1.1 | |||
| NbenuChassisInfo | 1.3.6.1.4.1.39406.1.1.1.1 | |||
| SbenuChassisType | 1.3.6.1.4.1.39406.1.1.1.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Chassis type.
| ||||
| SbenuChassisHwVersion | 1.3.6.1.4.1.39406.1.1.1.1.2 | DisplayString | RO | |
scalar · DisplayString · read-only · current Chassis hardware revision level, or an empty string if unavailable. | ||||
| SbenuChassisId | 1.3.6.1.4.1.39406.1.1.1.1.3 | DisplayString | RO | |
scalar · DisplayString · read-only · current Unique ID string. Defaults to chassis serial number if available, otherwise empty | ||||
| SbenuChassisNumOfSlots | 1.3.6.1.4.1.39406.1.1.1.1.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current Number of slots in this chassis, or -1 if neither applicable nor determinable. | ||||
| SbenuChassisPowerTrapEnable | 1.3.6.1.4.1.39406.1.1.1.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object controls SNMP traps for chassis Power Failure. If its value is set to enabled(1), then traps are generated. If the value is disabled(2), then traps are not generated. By default, this object has the value enabled(1).
| ||||
| SbenuChassisFanTrapEnable | 1.3.6.1.4.1.39406.1.1.1.1.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object controls SNMP traps for chassis Fan Failure. If its value is set to enabled(1), then traps are generated. If the value is disabled(2), then traps are not generated. By default, this object has the value enabled(1).
| ||||
| SbenuChassisSensorTrapEnable | 1.3.6.1.4.1.39406.1.1.1.1.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object controls SNMP traps for chassis senor Failure. If its value is set to enabled(1), then traps are generated. If the value is disabled(2), then traps are not generated. By default, this object has the value enabled(1).
| ||||
| SbenuSysUpTimeAtLastChassisChange | 1.3.6.1.4.1.39406.1.1.1.1.8 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current Time (in hundredths of a second) from the last cold start to the last change in the chassis' configuration. This value will be updated whenever the chassis experiences a change in the count, type, or slot position of a card in cardTable. | ||||
| NbenuCardInfo | 1.3.6.1.4.1.39406.1.1.1.2 | |||
| TbenuCardTable | 1.3.6.1.4.1.39406.1.1.1.2.1 | NA | ||
table · not-accessible · current Chassis card table. | ||||
| RbenuCardEntry | 1.3.6.1.4.1.39406.1.1.1.2.1.1 | NA | ||
| CbenuCardIndex | 1.3.6.1.4.1.39406.1.1.1.2.1.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current Index into cardTable (not physical chassis slot number). | ||||
| CbenuCardType | 1.3.6.1.4.1.39406.1.1.1.2.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Functional type of this card.
| ||||
| CbenuCardDescr | 1.3.6.1.4.1.39406.1.1.1.2.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current Text description of this card. | ||||
| CbenuCardSerial | 1.3.6.1.4.1.39406.1.1.1.2.1.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The serial number of this card, or zero if unavailable. | ||||
| CbenuCardPartNumber | 1.3.6.1.4.1.39406.1.1.1.2.1.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The part number of this card, or an empty string if unavailable. | ||||
| CbenuCardHwVersion | 1.3.6.1.4.1.39406.1.1.1.2.1.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Hardware revision level of this card, or an empty string if unavailable. | ||||
| CbenuCardSwVersion | 1.3.6.1.4.1.39406.1.1.1.2.1.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current Version of the firmware or microcode installed on this card, or an empty string if unavailable. | ||||
| CbenuCardSlotNumber | 1.3.6.1.4.1.39406.1.1.1.2.1.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current Slot number relative to the containing card or chassis, or -1 if neither applicable nor determinable. | ||||
| CbenuCardRamSize | 1.3.6.1.4.1.39406.1.1.1.2.1.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current Number of kilobytes of DRAM. A value -1 means not available / not applicable A value 0 means internal error. | ||||
| CbenuCardPrimaryDiskSize | 1.3.6.1.4.1.39406.1.1.1.2.1.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current Number of kilobytes of Disk Memory (SATA or Hard Disk). A value -1 means not available / not applicable. A value 0 means internal error. | ||||
| CbenuCardSecondaryDiskSize | 1.3.6.1.4.1.39406.1.1.1.2.1.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current Number of kilobytes of Disk Memory (SATA or Hard Disk). A value -1 means not available / not applicable. A value 0 means internal error. | ||||
| CbenuCardOperStatus | 1.3.6.1.4.1.39406.1.1.1.2.1.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current The operational status of the card. cardOperStatus is up when a card is recognized by the device and is enabled for operation. cardOperStatus is down if the card is not recognized by the device, or if it is not enabled for operation. cardOperStatus is standby if the card is enabled and acting as a standby slave. Intermediate stages (rom,flash,diag,boot,config) are also exposed.
| ||||
| NbenuCardIfInfo | 1.3.6.1.4.1.39406.1.1.1.3 | |||
| TbenuCardIfIndexTable | 1.3.6.1.4.1.39406.1.1.1.3.1 | NA | ||
table · not-accessible · current Chassis card Interface table. | ||||
| RbenuCardIfIndexEntry | 1.3.6.1.4.1.39406.1.1.1.3.1.1 | NA | ||
| CbenuCardIfIndex | 1.3.6.1.4.1.39406.1.1.1.3.1.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current matches RFC1213 ifTable IfIndex | ||||
| CbenuCardIfName | 1.3.6.1.4.1.39406.1.1.1.3.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current matches RFC1213 ifXTable IfName | ||||
| CbenuCardIfPortNumber | 1.3.6.1.4.1.39406.1.1.1.3.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Chassis port number, unique per port on a given card if available. | ||||
| CbenuCardIfSlotNumber | 1.3.6.1.4.1.39406.1.1.1.3.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Physical slot number of the card in the Chassis which contains this interface | ||||
| CbenuCardIfLinkUpDownEnable | 1.3.6.1.4.1.39406.1.1.1.3.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This enables and disables the sending of the proprietary notifications 'benuLinkUpTrap' and 'benuLinkDownTrap' that provide more information than the standard link up and link down notifications. By default, these traps are disabled.
| ||||
| CbenuCardIfPortType | 1.3.6.1.4.1.39406.1.1.1.3.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to identify port types for a given card.
| ||||
| CbenuCardIfBindName | 1.3.6.1.4.1.39406.1.1.1.3.1.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current interface name which is bound to this port . This string will be empty if there is no interface bind to this port | ||||
| CbenuCardIfEncapsulation | 1.3.6.1.4.1.39406.1.1.1.3.1.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current The encapsulation method used by the port. | ||||
| CbenuCardIfVirtualType | 1.3.6.1.4.1.39406.1.1.1.3.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to identify virtualized interfaces.
| ||||
| NbenuSensorInfo | 1.3.6.1.4.1.39406.1.1.1.4 | |||
| TbenuSensorTable | 1.3.6.1.4.1.39406.1.1.1.4.1 | NA | ||
table · not-accessible · current Chassis card table. | ||||
| RbenuSensorEntry | 1.3.6.1.4.1.39406.1.1.1.4.1.1 | NA | ||
| CbenuSensorCardIndex | 1.3.6.1.4.1.39406.1.1.1.4.1.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current cardIndex of the card in the Chassis cardTable which contains this sensor. | ||||
| CbenuSensorIndex | 1.3.6.1.4.1.39406.1.1.1.4.1.1.2 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Index into sensorTable. | ||||
| CbenuSensorName | 1.3.6.1.4.1.39406.1.1.1.4.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current Name of the sensor. | ||||
| CbenuSensorType | 1.3.6.1.4.1.39406.1.1.1.4.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Type of the sensor.
| ||||
| CbenuSensorValue | 1.3.6.1.4.1.39406.1.1.1.4.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Current Value of this sensor. The unit types for different type of sensors: temparature -- celcius Fan -- rpm Volatage -- volts Electric Current -- amperes Power -- watts | ||||
| CbenuSensorMinThresh | 1.3.6.1.4.1.39406.1.1.1.4.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current Minimum threshold for this sensor. | ||||
| CbenuSensorMaxThresh | 1.3.6.1.4.1.39406.1.1.1.4.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum threshold for this sensor. | ||||
| CbenuSensorState | 1.3.6.1.4.1.39406.1.1.1.4.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current State of the sensor.
| ||||
| CbenuSensorId | 1.3.6.1.4.1.39406.1.1.1.4.1.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current Unique ID of the sensor. | ||||
| NbenuChassisGeneralInfo | 1.3.6.1.4.1.39406.1.1.1.5 | |||
| SbenuSysUpTimeSinceLastConfigChange | 1.3.6.1.4.1.39406.1.1.1.5.1 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time (in hundredths of a second) since the last configuration change in the system. | ||||
| NbenuFanInfo | 1.3.6.1.4.1.39406.1.1.1.6 | |||
| TbenuFanTable | 1.3.6.1.4.1.39406.1.1.1.6.1 | NA | ||
table · not-accessible · current Chassis Fan table. | ||||
| RbenuFanEntry | 1.3.6.1.4.1.39406.1.1.1.6.1.1 | NA | ||
| CbenuFanCardIndex | 1.3.6.1.4.1.39406.1.1.1.6.1.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current cardIndex of the card in the Chassis cardTable which contains this Fan. | ||||
| CbenuFanMaxSpeed | 1.3.6.1.4.1.39406.1.1.1.6.1.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Maximum expected speed of each Fan. This value is applicable to all Fans in the card. Units : The value range is from 0 to 100 | ||||
| CbenuFanCurSpeed | 1.3.6.1.4.1.39406.1.1.1.6.1.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Current speed of each Fan. This value is applicable to all Fans in the card. Units : The value range is from 0 to 100 and is less than or equal to benuFanMaxSpeed | ||||
| CbenuFanStatus | 1.3.6.1.4.1.39406.1.1.1.6.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current A value of -1 means Not available / Not applicable.
The lower order 7 bits indicates status of 7 Fans.
A bit value of one indicates FAN is non-operational.
A bit value of zero indicates FAN is operational.
Examples :
(a) Value of 1 ( 0000 0001 ) indicates FAN #1 is
non-operational.
(b) Value of 9 ( 0000 1001 ) indicates FAN #1 and FAN #4
are non-operational.
(c) Value of 73( 0100 1001 ) indicates FAN #1,FAN #4 and FAN #7
are non-operational. | ||||
| NbenuPowerSupplyInfo | 1.3.6.1.4.1.39406.1.1.1.7 | |||
| TbenuPowerSupplyTable | 1.3.6.1.4.1.39406.1.1.1.7.1 | NA | ||
table · not-accessible · current Benu power supply state information. | ||||
| RbenuPowerSupplyEntry | 1.3.6.1.4.1.39406.1.1.1.7.1.1 | NA | ||
| CbenuPowerSupplyIndex | 1.3.6.1.4.1.39406.1.1.1.7.1.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current This object is used to identify the power supply.
| ||||
| CbenuPowerSupplyName | 1.3.6.1.4.1.39406.1.1.1.7.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The name of the power supply. | ||||
| CbenuPowerSupplyPresent | 1.3.6.1.4.1.39406.1.1.1.7.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether or not the power supply is installed in the chassis.
| ||||
| CbenuPowerSupplyType | 1.3.6.1.4.1.39406.1.1.1.7.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the type of the power supply.
| ||||
| CbenuPowerSupplyPowered | 1.3.6.1.4.1.39406.1.1.1.7.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether or not the power supply is actively supplying power. The value of notApplicable(3) will show if the entry for benuPowerSupplyPresent is no(2).
| ||||
| NbenuChassisNotifVariables | 1.3.6.1.4.1.39406.1.1.2 | |||
| SbenuChassisPowerFailureInfo | 1.3.6.1.4.1.39406.1.1.2.1 | INTEGER | AN | obsolete |
scalar · INTEGER · accessible-for-notify · obsolete Indicates the location of the Power Failure.
| ||||
| SbenuChassisFanFailureInfo | 1.3.6.1.4.1.39406.1.1.2.2 | DisplayString | AN | |
scalar · DisplayString · accessible-for-notify · current Indicates the location of the Fan Failure. | ||||
| SbenuChassisPowerFailureCardInfo | 1.3.6.1.4.1.39406.1.1.2.3 | Unsigned32 | AN | obsolete |
scalar · Unsigned32 · accessible-for-notify · obsolete Indicates the Card Index Card Index starts from #1. | ||||
| SbenuChassisPowerInfo | 1.3.6.1.4.1.39406.1.1.2.4 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current Indicates the location of the Power Failure or recovery.
| ||||
Traps / Notifications
- benuChassisFanFailureTrap
1.3.6.1.4.1.39406.1.1.0.2 - benuChassisPowerAbsent
1.3.6.1.4.1.39406.1.1.0.10 - benuChassisPowerFailure
1.3.6.1.4.1.39406.1.1.0.1 - benuChassisPowerFault
1.3.6.1.4.1.39406.1.1.0.7 - benuChassisPowerPresent
1.3.6.1.4.1.39406.1.1.0.9 - benuChassisPowerRecovery
1.3.6.1.4.1.39406.1.1.0.8 - benuLinkDownTrap
1.3.6.1.4.1.39406.1.1.0.4 - benuLinkUpTrap
1.3.6.1.4.1.39406.1.1.0.3 - benuSensorCritical
1.3.6.1.4.1.39406.1.1.0.5 - benuSensorNormal
1.3.6.1.4.1.39406.1.1.0.6