BDCOM-MEMORY-POOL-MIB
Shanghai Baud Data Communication Development Corp.MIB module for monitoring memory pools
snmptranslate -m BDCOM-MEMORY-POOL-MIB -Tpsnmpwalk -v2c -c <community> -m BDCOM-MEMORY-POOL-MIB <host> 1.3.6.1.4.1.3320.9.48Imports
| BDCOM-QOS-PIB-MIB | Percent |
|---|---|
| BDCOM-SMI | bdMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IbdcomMemoryPoolMIB | 1.3.6.1.4.1.3320.9.48 | |||
identity MIB module for monitoring memory pools | ||||
| NbdcomMemoryPoolObjects | 1.3.6.1.4.1.3320.9.48.1 | |||
| TbdcomMemoryPoolTable | 1.3.6.1.4.1.3320.9.48.1.1 | NA | ||
table · not-accessible · current A table of memory pool monitoring entries. | ||||
| RbdcomMemoryPoolEntry | 1.3.6.1.4.1.3320.9.48.1.1.1 | NA | ||
| CbdcomMemoryPoolType | 1.3.6.1.4.1.3320.9.48.1.1.1.1 | BDCOMMemoryPoolTypes | NA | |
column · BDCOMMemoryPoolTypes · not-accessible · current The type of memory pool for which this entry contains information. | ||||
| CbdcomMemoryPoolName | 1.3.6.1.4.1.3320.9.48.1.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current A textual name assigned to the memory pool. This object is suitable for output to a human operator, and may also be used to distinguish among the various pool types, especially among dynamic pools. | ||||
| CbdcomMemoryPoolAlternate | 1.3.6.1.4.1.3320.9.48.1.1.1.3 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Indicates whether or not this memory pool has an alternate pool configured. Alternate pools are used for fallback when the current pool runs out of memory. If an instance of this object has a value of zero, then this pool does not have an alternate. Otherwise the value of this object is the same as the value of bdcomMemoryPoolType of the alternate pool. | ||||
| CbdcomMemoryPoolValid | 1.3.6.1.4.1.3320.9.48.1.1.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates whether or not the remaining objects in this entry contain accurate data. If an instance of this object has the value false (which in and of itself indicates an internal error condition), the values of the remaining objects in the conceptual row may contain inaccurate information (specifically, the reported values may be less than the actual values). | ||||
| CbdcomMemoryPoolUsed | 1.3.6.1.4.1.3320.9.48.1.1.1.5 | Gauge32 | RO | |
column · Gauge32 · read-only · current Indicates the number of bytes from the memory pool that are currently in use by applications on the managed device.
| ||||
| CbdcomMemoryPoolFree | 1.3.6.1.4.1.3320.9.48.1.1.1.6 | Gauge32 | RO | |
column · Gauge32 · read-only · current Indicates the number of bytes from the memory pool that are currently unused on the managed device. Note that the sum of bdcomMemoryPoolUsed and bdcomMemoryPoolFree is the total amount of memory in the pool
| ||||
| CbdcomMemoryPoolLargestFree | 1.3.6.1.4.1.3320.9.48.1.1.1.7 | Gauge32 | RO | |
column · Gauge32 · read-only · current Indicates the largest number of contiguous bytes from the memory pool that are currently unused on the managed device.
| ||||
| TbdcomMemoryPoolUtilizationTable | 1.3.6.1.4.1.3320.9.48.1.2 | NA | ||
table · not-accessible · current A table of memory pool utilization entries. Each of the objects provides a general idea of how much of the memory pool has been used over a given period of time. It is determined as a weighted decaying average. | ||||
| RbdcomMemoryPoolUtilizationEntry | 1.3.6.1.4.1.3320.9.48.1.2.1 | NA | ||
row · not-accessible · current An entry in the memory pool utilization table.
| ||||
| CbdcomMemoryPoolUtilization1Min | 1.3.6.1.4.1.3320.9.48.1.2.1.1 | Percent | RO | |
column · Percent · read-only · current This is the memory pool utilization for 1 minute. | ||||
| CbdcomMemoryPoolUtilization5Min | 1.3.6.1.4.1.3320.9.48.1.2.1.2 | Percent | RO | |
column · Percent · read-only · current This is the memory pool utilization for 5 minutes. | ||||
| CbdcomMemoryPoolUtilization10Min | 1.3.6.1.4.1.3320.9.48.1.2.1.3 | Percent | RO | |
column · Percent · read-only · current This is the memory pool utilization for 10 minutes. | ||||
| NbdcomMemoryPoolNotifications | 1.3.6.1.4.1.3320.9.48.2 | |||
| NbdcomMemoryPoolConformance | 1.3.6.1.4.1.3320.9.48.3 | |||
| NbdcomMemoryPoolCompliances | 1.3.6.1.4.1.3320.9.48.3.1 | |||
| MbdcomMemoryPoolCompliance | 1.3.6.1.4.1.3320.9.48.3.1.1 | deprecated | ||
compliance · deprecated The compliance statement for entities which implement the BDCOM Memory Pool MIB
| ||||
| MbdcomMemoryPoolComplianceRev1 | 1.3.6.1.4.1.3320.9.48.3.1.2 | |||
compliance · current The compliance statement for entities which implement the BDCOM Memory Pool MIB | ||||
| NbdcomMemoryPoolGroups | 1.3.6.1.4.1.3320.9.48.3.2 | |||
| GbdcomMemoryPoolGroup | 1.3.6.1.4.1.3320.9.48.3.2.1 | |||
group · current A collection of objects providing memory pool monitoring. | ||||
| GbdcomMemoryPoolUtilizationGroup | 1.3.6.1.4.1.3320.9.48.3.2.2 | |||
group · current An optional group providing a collection of memory pool utilization objects. | ||||
Textual conventions
BDCOMMemoryPoolTypesInteger32 (1..65535)Represents the different types of memory pools that may be present in a managed device. Memory pools can be roughly categorized into two groups, predefined pools and dynamic pools. The following pool types are currently predefined: 1: processor memory 2: i/o memory 3: pci memory 4: fast memory 5: multibus memory Dynamic pools will have a pool type value greater than any of the predefined types listed above. Note that only the processor pool is required to be supported by all devices. Support for other pool types is dependent on the device being managed.